Академический Документы
Профессиональный Документы
Культура Документы
Sample Questions
1.
Which one of these menu or short cut will exit CATIA? A. B. C. D. E. Start and Exit File and Quit Crtl + G Crtl + X File and Close
2.
Of the following items which will rename an object? A. B. C. D. E. Double-click its name in the specification tree Edit the objects definition Use the Rename option in the contextual menu Edit the objects properties Overwrite its name in the specification tree
3.
What is this tool used for? A. B. C. D. E. To calculate and display mean dimensions To fix or lock all the part dimensions To display all the numerical tolerances To define numerical tolerances on dimensions To remove all the numerical constraints
4.
Which tool is used to get information on the threads and taps that have been created on a part?
A. B. C. D. E.
5.
What would be the result of a draft angle with the following parameters?
A.
B.
C.
D.
6.
Using the part above, what would be the result of the following pocket operation?
A.
B.
C.
D.
7.
Using the sketch profile above, which tool is activated to propagate the offset as shown?
A. B. C. D. E.
8.
When constraining a profile element, what does the default color of purple signify? A. B. C. D. E. Being projected from 3D Needing to be updated Published for sharing Currently being selected Being over constrained
9.
What are the conditions to be able to re-limit a loft ? A. The plane normal to the spine defined at the relimitation point must intersect the guide(s) and the point(s) resulting from this intersection must belong to the section The point(s) resulting from this intersection must belong to the section The plane parallel to the spine defined at the relimitation point must intersect the guide(s) and the point(s) resulting from this intersection must belong to the section The plane normal to the spine defined at the relimitation point must intersect the guide
B. C.
D.
10.
A. D.
B. E.
C.