Академический Документы
Профессиональный Документы
Культура Документы
Content
Preparing for Commissioning 2G Flexi BTS Manager Commissioning Types Creating SCF File (Offline) Local Commissioning Demonstration
(modules, cabling, antennas and radios) must be completed. Make sure a PC with 2G Flexi BTS Site Manager installed. One 10/100 Mbit/s Ethernet cable needed for the connection between the BTS and user PC. Parameter values must be available to be entered during commissioning. The parameter values are provided by the network planning process. BSC settings: the BTS site must already be created at the BSC for commissioning to be successfully completed.
When all is proven to be OK, perform the 'Power on' check and verify the LED
status.
Note: 1.On certain computers, you may also be required to restart your computer before running the application. 2. Re-installing the same version of the product will over-write the previous configuration with the default settings.
For internal use 10 Nokia Siemens Networks BSC S14 IFI / 090409
Mandatory to fill
List of installed Release packages and 2G Flexi BTS Site manager version
Commissioning Types
Commissioning types
Commissioning Process Goal (1/2)
The commissioning process is divided into 4 different commissioning processes
depending on the connection and commissioning statuses: BTS is not connected: The user intends to create SCF file or an EasyWizard
template.
BTS is connected and uncommissioned: The user wants to bring up the BTS in
functional state. He can either use an EasyWizard like template or can specify the settings manually
BTS is connected remotely and commissioned: The user wants to upgrade the
configuration or can change the configuration. This may either simply append in existing configuration or may lead to recommissioning of BTS based on the new settings to be upgraded or changed.
Commissioning types
Commissioning Process Goal (2/2)
The possible ways to perform commissioning process are:
Use existing SCF (Site Configuration File) Upload SCF from BTS Create SCF by manual commissioning using Commissioning Wizard Note: User should not modify the Site Configuration File by using XML editor. Only the BTS Manager should be used to change any values in SCF. The Commissioning Wizard will guide user through configuration. By clicking "next" button the wizard will continue to the next configuration screen The wizard consist following screen: Site specific Information Hardware Configuration Transmission Parameter
Commissioning Types
BTS is not connected
Commissioning Types
BTS connected-uncommissioned
Commissioning Types
BTS connected-commissioned
Commissioning Types
BTS connected remotely-commissioned
2 3
Local Commissioning
Local Commissioning
IP Setup for Local Commissioning PC
Connect via LMP on ESMx using ethernet cable Setup the local IP address on PC under Internet
Protocol (TCP/IP) properties as follow: IP address: 192.168.255.130 Subnet Mask: 255.255.255.128 Default Gateway: none Personal Firewall may need to allow access to local network eg ZoneAlarm The default settings of the BTS are: IP address: 192.168.255.131 2G Flexi BTS Site Manager connection TCP Port: 27500 2G Flexi BTS Site Manager SW download via TCP Port: 27501
Local Commissioning
Flexi 2G BTS Site Manager (1/2)
Nokia Siemens Networks 2G Flexi
BTS Site Manager allows the BTS operators to Commission Configure Monitor the BTS These tasks are performed with option: at the BTS site (known as Local
Connection) via communication from the NMS system. BSC site (known as Remote Connection).
Local Commissioning
Flexi 2G BTS Site Manager (2/2)
Local Connection directly to Flexi Multiradio BTS GSM/EDGE Remote Connection via NetAct Create file (commissioning file
IP address of System Module, and Password just keep empty Create File is to create the template or SCF
Local Commissioning
Local Connection
Local Commissioning
Flexi 2G BTS Site Manager window
The main functions of Flexi BTS manager are: BTS
commissioning BTS supervision BTS maintenance BTS testing
In main menu, the view are: Alarms Base Station Commissioning Supervision Transmission Tests
Navigation bar
Properties
Local Commissioning
Commissioning Wizard
Local Commissioning
Undo Commissioning (1/4)
to revert the site
to uncommissioned mode and he can also check the option that whether user wants to erase bypass capacity along with it or no.
This button is
disabled in remote connection
Local Commissioning
Undo Commissioning (2/4)
Local Commissioning
Undo Commissioning (3/4)
Indicate the BTS has successfully uncommissioned
Local Commissioning
Undo Commissioning (4/4)
If the BTS is in
un-commissioned mode, the connecting RF module is not automatically detected
Connecting RF
module will be detected if the BTS has been commissioned
Local Commissioning
Commissioning Manually
In this
example, user do commissi ning manually
Local Commissioning
Commissioning Manually - Procedure
Site Specific
Information Hardware Configuration
Module Configuration Local Sector Settings Antenna Settings
RET Setting FRM EAC Settings Battery Backup Unit Other Passive Units
Transmission
parameter
Physical Setting LIF Settings Synchronization Abis Termination Abis Allocation Abis Protection Cross Connection Q1 Management
Local Commissioning
Site Specific Information
Navigation tree - Enables user to navigate any screen, and update/view parameters corresponding to that screen. Data persistence is maintained across screen navigations
For internal use 43 Nokia Siemens Networks
Navigation tree - Enables user to navigate any screen, and update/view parameters corresponding to that screen. Data persistence is maintained across screen navigations
Local Commissioning
Hardware Configuration
If user has
hardware template file (.epb or SCF file), specify from file can be selected
In this
example specify manually is selected
Local Commissioning
configure various radio modules, synchroni zation master, and radio masters
Local Commissioning
configure and associate antennas of only one type of RF unit (RM) to a particular local sector and specify per TRX power
Local Commissioning
Select the antenna line settings, specify MHA settings, provide information for feeder voltage, feeder loss, VSWR minor and major limits for the selected antenna
Local Commissioning
User can change the Received Signal Strength Indicator (RSSI) sample count
Local Commissioning
configuratio n of RETs in either online or offline mode
Local Commissioning
configure the external alarm lines associated with the individual FRMs
Local Commissioning
Enter the battery backup unit parameters
Local Commissioning
Enter the passive unit parameters
Local Commissioning
Transmission Parameter
If user has
transmission template file (.ept or SCF file), specify from file can be selected
Upload from
BTS used if user want to oads the transmission configuration from the BTS and which can then be edited by the user, if required
In this
example specify manually is selected
For internal use 53 Nokia Siemens Networks BSC S14 IFI / 090409
Local Commissioning
Setting the
functionality of interface (E1 or T1)
Local Commissioning
Setting the
use interface settings, modify the CRC (if required) and name of the interface
Local Commissioning
Select the E1
for synchronizato n reference and modify the priority of the reference synchronizatio n among defined E1
Local Commissioning
Define the
topology (default is Chain)
user can
define the synchroniz ation protection if the topology is Loop
Local Commissioning
user can enable or disable the 2MHz clock output from one BTS, to be used as the synchronizat ion source for any other connected BTS.
Local Commissioning
In Satellite
Abis, specify if there is a satellite circuit in the link between the BTS and the BSC Enable Abis Signal Mapping allows the BSC to dynamically provide the Abis allocations (TRXSIG, TCH, EDAP) for a BTS
Local Commissioning
Enter the
Abis Allocation parameters (OMUSIG, TRXSIG, TCH and EDAP)
If Enable
Abis Signal Mapping is chosen, only OMUSIG can be specified, the rest will be mapping by the BSC
Local Commissioning
If Loop
topology is used, Abis protection can be defined
Local Commissioning
Local Commissioning
Local Commissioning
Flexhub
User need to
install the FlexiHub Manager beforehand
Local Commissioning
SCF preview - Summary
From this
summary, user can check whether the commissioing step has been completed.
This can be
checked by looking at the indication color of each step, green means ok, red means not complete
Local Commissioning
SCF preview - Detail
Local Commissioning
Viewing the commissioning progress and the commissioning result
Local Commissioning
Commissioning completeted
Local Commissioning
Commissioning Report
Detail Report
Local Commissioning
Example if the TRX test is failed
Local Commissioning
BCF Object after commissioning
Local Commissioning
Cell Object after commissioning
Local Commissioning
TRX Object after commissioning
Local Commissioning
Tracing the traffic during the test call
From the toolbar select Test menu select Traffic trace select cell would be traced --> click Automatic Update (if necessary) For the CS call, yellow color indicates the RTSL that being occupied
Local Commissioning
Fetch SCF from BTS
From the toolbar select Commissioning menu select Fetch SCF from BTS Save the SCF file (.xml) in local PC
Local Commissioning
Fetch the commissioning report
From the toolbar select Commissioning menu select Report select Fetch from BTS Save the Commissioning Report in Local PC
Local Commissioning
Site Information
From the toolbar select Supervision menu select Site Information Save the Site Information file in Local PC
Local Commissioning
Check on the BSC (1/2)
Using MML command: ZEEI: <bcf_id>; user can check the status of BTS object
under specific BCF.
OADING PROGRAM VERSION 22.4-1 BSC LINDA 2010-05-10 RADIO NETWORK CONFIGURATION IN BSC: 16:38:19 E P B T R C R E S X F U = = == D-CHANNEL BUSY O&M LINK HR FR NAME ST /GP ===== == === === 0 12 20 30 40 50 60 70 80 90 100 110 120 0 0 0 0 0 0 0 0 0 0 0 0 51 MBCCHC 51 47 47 51 MBCCHC 51 47 47 51 MBCCHC 51 47 47 P 0 0 3 3 0 P 1 1 3 3 2 6 2 6
F AD OP R ET- BCCH/CBCH/ LAC CI HOP ST STATE FREQ T PCM ERACH ===================== == ====== ==== == ==== =========== BCF-0051 FLEXI MULTIRADIO 00220 22010 BTS-0010 U WO DEMOBTS1 -/TRX-001 U WO TRX-002 U WO TRX-003 U WO TRX-004 U WO 00220 22011 BTS-0011 U WO DEMOBTS2 -/TRX-005 U WO TRX-006 U WO TRX-007 U WO TRX-008 U WO 00220 22012 BTS-0012 U WO DEMOBTS3 -/TRX-009 U WO TRX-010 U WO TRX-011 U WO TRX-012 U WO For internal use
78 Nokia Siemens Networks
U WO
0 OM051 WO
0
P 1 1 3 3
2 1