Академический Документы
Профессиональный Документы
Культура Документы
Here you will find setup instructions. Please address on this directly with our Support team.
3.- Startup:
3.1. Data Center - Configuration of ADSL router (*): IP 192.168.0.1 // No DHCP // NAT (UDP+TCP) from port 22 to port 22 at 192.168.0.2, from ports 6881, 6882, 6883, 6884, 6885, 6886, 6887, 6888 y 6889 to the same ports at 192.168.0.2 and from ports 443, 5900, 5901 to the same ones at 192.168.0.120. - Installation (*) of all hardware items in the Data Center. - Server booting.
3.2. Network (system signal distribution) - Network configuration (*): one switch (usually the vertical one) may implement IGMP Querier and all others may support IGMP Snooping and Unknown Multicast filtering.
3.3. Rooms - Installation (*) of all hardware items in each room (STB + IR dongle, remote control, IR keyboard).
- Configuration (*) of the TV set so that the input loading as default is the one where the STB is connected. - STB configuration: reset the STB (automatic firmware loading, wait 5 minutes) > insert password > insert room number > choose location and TV model > installation concluded (STB reboot in 5 minutes). - Set the remote control for the TV model to be used. - Go through all different sections in the user interface to check on the correct operation of the system.
(*) Tasks to be done by the Distributor, prior to ES visit (if requested) for set-up and training.
Please directly deal with our Support team as they are in charge for setups. You may please keep me in CC to follow up.