Академический Документы
Профессиональный Документы
Культура Документы
80010622
17102690 1920 2200 MHz 2200 2490 MHz +45, 45 17.8 ... 17.6 ... 17.5 0 ... 6 ... 12 +45, 45 18.0 ... 17.9 ... 17.5 0 ... 6 ... 12 2490 2690 MHz +45, 45 18.0 ... 17.7 ... 17.3 0 ... 6 ... 12
10 3 0
10
dB
3 0
Horizontal Pattern
dB
1710 2690 45
1710 2690 45
7-16
7-16
7-16
7-16
Input
6.5
4 x 7-16 female Bottom 2 x, Position bottom continuously adjustable Frontal: Lateral: Rearside: 720 N (at 150 km/h) 165 N (at 150 km/h) 740 N (at 150 km/h) 200 km/h 1415 / 323 / 71 mm M (Medium) 17.5 kg / 19.5 kg (clamps incl.) 1706 x 337 x 112 mm Panel and 2 units of clamps for 50 115 mm diameter
Subject to alteration.
10 3 0
10
dB
3 0
Horizontal Pattern
dB
Max. wind velocity Height/width/depth Category of mounting hardware Weight Packing size Scope of supply
936.3621/a
10 3 0
10
dB
3 0
dB
80010622 Page 1 of 5
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit. Wall mounting: No additional mounting kit needed. Material: Reflector screen: Tin-plated copper. Radiator: Tin-plated zinc. Flat fiberglass radome: The max. radome depth is only 71 mm. Fiberglass material guarantees optimum performance with regards to stability, stiffness, UV resistance and painting. The colour of the radome is grey. All screws and nuts: Stainless steel. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded. 1415 1480 1520 Adjustment mechanism with integrated scale 30
936.3621/a Subject to alteration.
Grounding:
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: Low temperature: 55 C High temperature (dry): +60 C Ice protection: Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. Environmental tests: Kathrein antennas have passed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathreins antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules.
As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operating conditions.
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
Suitable for mast diameter Antenna mast distance F Number of pieces Material of clamp and screws Weight
Torque MA = G
A 152 mm
B 40 mm
C 40 mm
D 50 115 mm
E 93 mm
F 18 26 mm
G 20 Nm
H 125 mm
Washer
936.3621/a
Subject to alteration.
Internet: www.kathrein.de
80010622 Page 3 of 5
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
2 2
Adjustment wheel with twist-lock function. Downtilt spindle with integrated scale.
Thread for fixing the protective cap or the RCU (Remote Control Unit). Gearwheel for RCU power drive.
To set the downtilt angle exactly, you must look horizontally at the scale. The lower edge of the gearwheel must be used for alignment.
0 max.
max. 0
For a description of RCU installation please refer to the respective data sheet.
Page 4 of 5 80010622
Internet: www.kathrein.de
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
936.3621/a
General Instructions for Feederline Installation on Panels with four Connectors arranged on two Levels
Please note: In order not to damage the interfaces, please make sure that only the right tools are used. Tighten the feederline connector interfaces solely by using a common torque-wrench with a suitable wrench width.
There are four interfaces for feeding the antenna located at the bottom.
The connectors are mounted at two levels in order to facilitate feederline installation.
Start with the rearside located interface no. 1. Place the connector carefully and fix the nut using a torque-wrench (according to the manufacturers guidelines). The further sequence for the installation is: feederlines no. 2, 3, 4.
After feederline installation the optional remote control units (RCU) can be mounted if required.
For a full description of RCU installation please refer to the respective data sheet.
936.3621/a
Subject to alteration.
Please note: Additional weather sealing of correctly installed feederline connector interfaces is not required, nor is it recommended by the connector manufacturers.
80010622 Page 5 of 5
Internet: www.kathrein.de
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973