Академический Документы
Профессиональный Документы
Культура Документы
Test Cases
GSM-BTR-1-4806
CDR-UMTS-010
GSM-BTR-1-4808
CDR-UMTS-010
GSM-BTR-1-4810
CDR-UMTS-010
GSM-BTR-1-4812
CDR-UMTS-010
GSM-BTR-1-4814
CDR-UMTS-010
GSM-BTR-1-4816
CDR-UMTS-010
GSM-BTR-1-4818
CDR-UMTS-010
GSM-BTR-1-4820
CDR-UMTS-010
GSM-BTR-1-4822
CDR-UMTS-010
GSM-BTR-1-4824
CDR-UMTS-010
GSM-BTR-1-4826
CDR-UMTS-010
GSM-BTR-1-4828
CDR-UMTS-010
GSM-BTR-1-4830
CDR-UMTS-010
GSM-BTR-1-4832
CDR-UMTS-010
Interactive or background / UL:128 DL:64 kbps / PS RAB + UL:3.4 DL: 3.4 kbps SRBs for DCCH
GSM-BTR-1-4834
CDR-UMTS-010
Interactive or background / UL:384 DL:64 kbps / PS RAB + UL:3.4 DL: 3.4 kbps SRBs for DCCH
GSM-BTR-1-4836
CDR-UMTS-010
Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:128 DL:64 kbps / PS RAB + UL:3.4 DL: 3.4 kbps SRBs for DCCH
GSM-BTR-1-4838
CDR-UMTS-010
Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:64 DL:64 kbps / PS RAB + Interactive or background / UL:64 DL:64 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
GSM-BTR-1-4840
CDR-UMTS-010
Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:64 DL:128 kbps / PS RAB + Interactive or background / UL:64 DL:128 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
GSM-BTR-1-4842
CDR-UMTS-010
Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streaming / unknown / UL: 16 DL:128 kbps / PS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
GSM-BTR-1-4844
CDR-UMTS-010
Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streaming / unknown / UL: 128 DL:16 kbps / PS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
GSM-BTR-1-4846
CDR-UMTS-010
Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streaming / unknown / UL: 16 DL:64 kbps / PS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
GSM-BTR-1-4848
CDR-UMTS-010
Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streaming / unknown / UL: 64 DL:16 kbps / PS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
GSM-BTR-1-4850
CDR-UMTS-010
Conversational/speech / UL:5.9 DL:5.9 kbps / CS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
GSM-BTR-1-4852
CDR-UMTS-010
Streaming / unkNown / UL:8 DL:32 kbps / PS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
GSM-BTR-1-4854
CDR-UMTS-010
Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streamingl / unkNown / UL:32 DL:32 kbps / PS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
GSM-BTR-1-4858
CDR-UMTS-010
Interactive / UL:128 DL: [max bit rate depending on UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
GSM-BTR-1-4860
Interactive or background / UL:128 DL:[Bit rate depending on the UE category] / PS RAB + Interactive or background / UL:128 DL:[Bit rate depending on the UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
GSM-BTR-1-4862
Interactive or background/ UL:384 DL:[Bit rate depending on the UE category] / PS RAB + Interactive or background / UL:384 DL:[Bit rate depending on the UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
GSM-BTR-1-4866
Conversational/Speech UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:64 DL: [max bit rate depending on UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
GSM-BTR-1-4868
Conversational/Speech UL:12.2 DL:12.2 kbps / CS RAB + Interactive / UL:128 DL: [max bit rate depending on UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
GSM-BTR-1-4870
Conversational/Speech UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:384 DL: [max bit rate depending on UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
GSM-BTR-1-4872
Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streaming / unknown / UL:128 DL: [ Guaranteed bit rate 128 max bit rate depending on UE category] kbps / PS RAB + Interactive or background / UL:128 DL: [max bit rate depending on UE category] / PS RAB + UL
GSM-BTR-1-4874
CDR-UMTS-010
Interactive / UL:16 DL: [max bit rate depending on UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH Conversational / speech / UL:5.9 DL:5.9 kbps / CS RAB + Interactive or background / UL:0 DL:0 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:0 DL:0 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
GSM-BTR-1-4876
CDR-UMTS-010
GSM-BTR-1-4598
CDR-UMTS-010
GSM-BTR-1-4878
CDR-UMTS-010 CDR-HSD-240
GSM-BTR-1-4880
GSM-BTR-1-4882
CDR-UMTS-010 CDR-ENA-060
Conversational/Speech UL:12.2 DL:12.2 kbps / CS RAB + Interactive / UL:64 DL: [max bit rate depending on UE category] / PS RAB + Interactive / UL:64 DL: [max bit rate depending on UE category] / PS RAB + Interactive / UL:64 DL: [max bit rate depending on UE category] / PS RAB
GSM-BTR-1-4886
Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive / UL:64 DL: [ max bit rate depending on UE category] kbps / PS RAB + Interactive / UL:64 DL: [max bit rate depending on UE category] / PS RAB + UL
GSM-BTR-1-4888
Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive / UL:128 DL: [ max bit rate depending on UE category] kbps / PS RAB + Interactive / UL:128 DL: [max bit rate depending on UE category] / PS RAB + UL
GSM-BTR-1-4892
Streaming / unknown / UL:16 DL: [guaranteed 128, max bit rate depending on UE category] kbps / PS RAB + Interactive / UL:64 DL: [max bit rate depending on UE category] / PS RAB + Interactive / UL:64 DL: [max bit rate depending on UE category] / PS RAB
GSM-BTR-1-4896
Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streaming / unknown / UL:16 DL: [guaranteed 128, max bit rate depending on UE category] kbps / PS RAB + Interactive / UL:8 DL: [max bit rate depending on UE category] / PS RAB
GSM-BTR-1-4898
Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streaming / unknown / UL:R99 streaming 128 DL: [guaranteed 128, max bit rate depending on UE category] kbps / PS RAB + Interactive / UL:8 DL: [max bit rate depending on UE category] / PS RAB
GSM-BTR-1-4902
Conversational / speech / UL:64 DL:64 kbps / PS RAB + Interactive / UL:EUL [max bit rate depending on UE category] DL: [max bit rate depending on UE category] / PS RAB
GSM-BTR-1-4904
Streaming / unknown / UL:16 DL: [guaranteed 128, max bit rate depending on UE category] kbps / PS RAB + Interactive / UL:8 DL: [max bit rate depending on UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH Streaming / UL:R99 streaming 16 DL: [guaranteed 128, max bit rate depending on UE category] kbps / PS RAB + Interactive / UL:8 DL: [max bit rate depending on UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH From Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive / UL:64 DL: [ HSDPA max bit rate depending on UE category] kbps / PS RAB to Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive / UL:64 DL:64 PS RAB PS RAB change: (UL:384 / DL: 384 PS) to (UL:[max bit rate depending on UE category] / DL: [max bit rate depending on UE category] PS) to (UL:384 / DL: 384 PS)
GSM-BTR-1-4906
GSM-BTR-1-4908
3GPP specifications
GSM-BTR-1-4952
3GPP Specifications
GSM-BTR-1-4680
GSM-BTR-1-4682
3GPP Specifications
Band II, NW initiates PDP Context Deactivation when UE has multiplecalls (CS + PS Call) active and is also connected with PC via ActiveSync or PC Suite or Desktop Manager or iTune through a USB cable.
GSM-BTR-1-4684
3GPP Specifications
Band V, NW initiates PDP Context Deactivation when UE has multiplecalls (CS + PS Call) active and is also connected with PC via ActiveSync or PC Suite or Desktop Manager or iTune through a USB cable.
GSM-BTR-1-4686
3GPP Specifications
GSM-BTR-1-4688
DELETE
GSM-BTR-1-4690
DELETE
Two RABs and a CS call, the two RABs are in dormant state, UE initiated data on the first RAB
GSM-BTR-1-4692
Two RABs and a CS call, the two RABs are in dormant state, UE initiated data on the second RAB
Network Configuration
UMTS/HSUPA/HSDPA 850 cell and 1900 cell, static channel, good signal quality
UMTS/HSDPA 850 cell and 1900 cell, static channel, good signal quality
UMTS/HSDPA 850 cell and 1900 cell, static channel, good signal quality
UMTS/HSDPA 850 cell and 1900 cell, static channel, good signal quality
UMTS/HSDPA 850 cell and 1900 cell, static channel, good signal quality
Test Steps and Pass / Fail Criteria Verify that while the TU is supporting a PS Interactive/Background 64/64 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/64 RAB, and following release of the Interactive/Background 64/64 RAB, reconfigure to support a CS Conversational/Speech 12.2 RAB only. Verify that while the TU is supporting a PS Interactive/Background 64/128 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/128 RAB, and following release of the CS 12.2 call, reconfigure to support a PS Interactive/Background 64/128 RAB only. Verify that while the TU is supporting a PS Interactive/Background 64/128 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/128 RAB, and following release of the PS Interactive/Background 64/128 RAB, reconfigure to support a CS Conversational/Speech 12.2 RAB only. Verify that while the TU is supporting a PS Interactive/Background 64/384 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/384 RAB, and following release of the CS 12.2 call, reconfigure to support a PS Interactive/Background 64/384 RAB only. Verify that while the TU is supporting a PS Interactive/Background 64/384 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/384 RAB, and following release of the PS Interactive/Background 64/384 RAB, reconfigure to support a CS Conversational/Speech 12.2 RAB only. Verify that while the TU is supporting a CS Conversational/Speech 12.2 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/64 RAB, and following release of the PS Interactive/Background 64/64 RAB, reconfigure to support a CS Conversational/Speech 12.2 RAB only. Verify that while the TU is supporting a CS Conversational/Speech 12.2 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/64 RAB, and following release of the CS 12.2 call, reconfigure to support a PS Interactive/Background 64/64 RAB only. Verify that while the TU is supporting a CS Conversational/Speech 12.2 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/128 RAB, and following release of the PS Interactive/Background 64/128 RAB, reconfigure to support a CS Conversational/Speech 12.2 RAB only. Verify that while the TU is supporting a CS Conversational/Speech 12.2 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/128 RAB, and following release of the CS 12.2 call, reconfigure to support a PS Interactive/Background 64/128 RAB only. Verify that while the TU is supporting a CS Conversational/Speech 12.2 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/128 RAB, and following the release of the PS Interactive/Background 64/128 RAB, reconfigure to support a CS Conversational/Speech 12.2 RAB only. The 64/128 RAB should be supported by the TU even though the TU is subscribed to PS 64/384 service.
Verify that while the TU is supporting a CS Conversational/Speech 12.2 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/128 RAB, and following the release of the CS 12.2 call, reconfigure to support a PS Interactive/Background 64/128 RAB only. The 64/128 RAB should be supported by the TU even though the TU is subscribed to PS 64/384 service. Verify that while the TU is supporting a CS Conversational/Speech 12.2 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/384 RAB, and following release of the PS Interactive/Background 64/384 RAB, reconfigure to support a CS Conversational/Speech 12.2 RAB only. Verify that while the TU is supporting a CS Conversational/Speech 12.2 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/384 RAB, and following release of the CS 12.2 call, reconfigure to support a PS Interactive/Background 64/384 RAB only. 1. power up the DUT in the 3G cell 2. activate a PDP Context 3. network assign the RAB/SRB combination specified in this test case 4. perform alternate FTP download and upload * The DUT shall support the RAB/SRB 1. power up the DUT in the 3G cell 2. activate a PDP Context 3. network assign the RAB/SRB combination specified in this test case 4. perform alternate FTP download and upload * The DUT shall support the RAB/SRB 1. power up the DUT in the 3G cell 2. establish a CS voice call 3. activate a PDP Context 4. network assign the RAB combination specified in this test case 5. perform alternate FTP download and upload 6. check voice quality * The DUT shall support the RAB/SRB combination * DUT shall have good audio quality for the voice call 1. power up the DUT in the 3G cell 2. establish a CS voice call 3. activate 1st PDP Context (such as a browser on the DUT) 4. activate 2nd PDP Context with a different QoS (as a tethered dialup modem) 5. network assign the RAB combination specified in this test case 6. verify the data session throughput 7. check voice quality * The DUT shall support the RAB/SRB combination * DUT shall have good audio quality for the voice call
1. power up the DUT in the 3G cell 2. establish a CS voice call 3. activate 1st PDP Context (such as a browser on the DUT) 4. activate 2nd PDP Context with a different QoS (as a tethered dialup modem) 5. network assign the RAB combination specified in this test case 6. verify the data session working fine. 7. check voice quality * The DUT shall support the RAB/SRB combination * DUT shall have good audio quality for the voice call 1. power up the DUT in the 3G cell 2. establish a CS voice call 3. activate 1st PDP Context (such as a browser on the DUT) 4. activate 2nd PDP Context with a different QoS (as a tethered dialup modem) 5. network assign the RAB combination specified in this test case 6. verify the data session working fine. 7. check voice quality * The DUT shall support the RAB/SRB combination * DUT shall have good audio quality for the voice call 1. power up the DUT in the 3G cell 2. establish a CS voice call 3. activate 1st PDP Context (such as a browser on the DUT) 4. activate 2nd PDP Context with a different QoS (as a tethered dialup modem) 5. network assign the RAB combination specified in this test case 6. verify the data session working fine. 7. check voice quality * The DUT shall support the RAB/SRB combination * DUT shall have good audio quality for the voice call 1. power up the DUT in the 3G cell 2. establish a CS voice call 3. activate 1st PDP Context (such as a browser on the DUT) 4. activate 2nd PDP Context with a different QoS (as a tethered dialup modem) 5. network assign the RAB combination specified in this test case 6. verify the data session working fine. 7. check voice quality * The DUT shall support the RAB/SRB combination * DUT shall have good audio quality for the voice call
1. power up the DUT in the 3G cell 2. establish a CS voice call 3. activate 1st PDP Context (such as a browser on the DUT) 4. activate 2nd PDP Context with a different QoS (as a tethered dialup modem) 5. network assign the RAB combination specified in this test case 6. verify the data session working fine. 7. check voice quality * The DUT shall support the RAB/SRB combination * DUT shall have good audio quality for the voice call 1. power up the DUT in the 3G cell 2. establish a CS voice call 3. activate 1st PDP Context (such as a browser on the DUT) 4. network assign the RAB combination specified in this test case 5. verify the data session working fine. 6. check voice quality * The DUT shall support the RAB/SRB combination * DUT shall have good audio quality for the voice call 1. power up the DUT in the 3G cell 2. activate 1st PDP Context (such as a browser on the DUT) 3. activate 2nd PDP Context with a different QoS (as a tethered dialup modem) 4. network assign the RAB combination specified in this test case 5. verify the data session working fine. * The DUT shall support the RAB/SRB combination
1. power up the DUT in the 3G cell 2. establish a CS voice call 3. activate 1st PDP Context (such as a browser on the DUT) 4. activate 2nd PDP Context with a different QoS (as a tethered dialup modem) 5. network assign the RAB combination specified in this test case 6. verify the data session working fine. 7. check voice quality * The DUT shall support the RAB/SRB combination * DUT shall have good audio quality for the voice call 1. power up the DUT in the 3G cell 2. activate a PDP Context 3. network assign the RAB/SRB combination specified in this test case 4. perform alternate FTP download and upload * The DUT shall support the RAB/SRB
1. power up the DUT in the 3G cell 2. activate 1st PDP Context (such as a browser on the DUT) 3. activate 2nd PDP Context with a different QoS (as a tethered dialup modem) 4. network assign the RAB combination specified in this test case 5. verify the data session throughput
1. power up the DUT in the 3G cell 2. activate 1st PDP Context (such as a browser on the DUT) 3. activate 2nd PDP Context with a different QoS (as a tethered dialup modem) 4. network assign the RAB combination specified in this test case 5. verify the data session working fine.
* The DUT shall support the RAB/SRB combination 1. power up the DUT in the 3G cell 2. establish a CS voice call 3. activate a PDP Context 4. network assign the RAB combination specified in this test case 5. perform alternate FTP download and upload 6. check voice quality * The DUT shall support the RAB/SRB combination * DUT shall have good audio quality for the voice call 1. power up the DUT in the 3G cell 2. establish a CS voice call 3. activate a PDP Context 4. network assign the RAB combination specified in this test case 5. perform alternate FTP download and upload 6. check voice quality * The DUT shall support the RAB/SRB combination * DUT shall have good audio quality for the voice call 1. power up the DUT in the 3G cell 2. establish a CS voice call 3. activate a PDP Context 4. network assign the RAB combination specified in this test case 5. perform alternate FTP download and upload 6. check voice quality * The DUT shall support the RAB/SRB combination * DUT shall have good audio quality for the voice call
1. power up the DUT in the 3G cell 2. establish a CS voice call 3. activate 1st PDP Context 4. activate 2nd PDP Context 4. network assign the RAB combination specified in this test case 5. perform alternate FTP download and upload 6. check voice quality * The DUT shall support the RAB/SRB combination * DUT shall have good audio quality for the voice call 1. power up the DUT in the 3G cell 2. activate a PDP Context 3. network assign the RAB/SRB combination specified in this test case 4. perform alternate FTP download and upload * The DUT shall support the RAB/SRB 1. power up the DUT in the 3G cell 2. MO or MT a CS voice call (AMR5.9, SF128) 3. activate a PDP Context 3. network assign the RAB/SRB combination specified in this test case 4. DUT is able to support the required CS RAB + PS RAB simultaneously. * The DUT shall support the RAB/SRB 1. power up the DUT in the 3G cell 2. MO or MT a CS voice call (AMR12.2, SF128) 3. activate a PDP Context 3. network assign the RAB/SRB combination specified in this test case 4. DUT is able to support the required CS RAB + PS RAB simultaneously. * The DUT shall support the RAB/SRB 1. power up the DUT in the 3G cell 2. MO or MT a CS voice call (AMR12.2, SF128) 3. activate a PDP Context 3. network assign the RAB/SRB combination specified in this test case 4. perform alternate FTP download and upload * The DUT shall support the RAB/SRB 1. power up the DUT in the 3G cell 2. MO or MT a CS voice call (AMR5.9, SF128) 3. activate a PDP Context 3. network assign the RAB/SRB combination specified in this test case 4. perform alternate FTP download and upload * The DUT shall support the RAB/SRB
1. power up the DUT in the 3G cell 2. MO or MT a CS voice call (AMR12.2, SF128) 3. activate three PDP Contexts consequtively 3. network assign the RAB/SRB combination specified in this test case 4. perform alternate FTP download and upload * The DUT shall support the RAB/SRB 1. power up the DUT in the 3G cell 2. establish a CS voice call 3. activate 1st PDP Context 4. activate 2nd PDP Context 4. network assign the RAB combination specified in this test case 5. perform alternate FTP download and upload 6. check voice quality * The DUT shall support the RAB/SRB combination * DUT shall have good audio quality for the voice call 1. power up the DUT in the 3G cell 2. establish a CS voice call 3. activate 1st PDP Context 4. activate 2nd PDP Context 4. network assign the RAB combination specified in this test case 5. perform alternate FTP download and upload 6. check voice quality * The DUT shall support the RAB/SRB combination * DUT shall have good audio quality for the voice call 1. power up the DUT in the 3G cell 2. activate 1st PDP Context (such as a browser on the DUT) 3. activate 2nd PDP Context with a different QoS (as a tethered dialup modem) 4. activate 3rd PDP Context with a different QoS (streaming) 5. network assign the RAB combination specified in this test case 6. verify the data session working fine.
1. power up the DUT in the 3G cell 2. MO or MT a CS call 3. activate 1st PDP Context (such as a browser on the DUT) 4. activate 2nd PDP Context with a different QoS (as a tethered dialup modem) 5. network assign the RAB combination specified in this test case 6. verify the data session working fine.
1. power up the DUT in the 3G cell 2. MO or MT a CS call 3. activate 1st PDP Context (such as a browser on the DUT) 4. activate 2nd PDP Context with a different QoS (as a tethered dialup modem) 5. network assign the RAB combination specified in this test case 6. verify the data session working fine.
* The DUT shall support the RAB/SRB combination 1. power up the DUT in the 3G cell 2. Activate PDP Context with QoS conversational, UL64+DL64 3. activate 2nd primary PDP Context 4. network assign the RAB combination specified in this test case 5. verify the data session working fine.
* The DUT shall support the RAB/SRB combination 1. power up the DUT in the 3G Band V cell 2. activate 1st PDP Context 3. activate 2nd PDP Context with a different QoS 4. network assign the RAB combination specified in this test case 5. verify the data session working fine.
* The DUT shall support the RAB/SRB combination 1. power up the DUT in the 3G band II cell 2. activate 1st PDP Context 3. activate 2nd PDP Context with a different QoS 4. network assign the RAB combination specified in this test case 5. verify the data session working fine.
Verify Device could switch from CS + UL64k/DL HSDPA RAB to CS + UL64k/DL64k RAB after it receives Radio Bearer Reconfiguration with "dl-parameters : sameAsUL.
Verify Test UE can correctly upgrade its PS RAB from DCH/DCH to E-DCH/HSDSCH, then downgrade from E-DCH/HS-DSCH to DCH/DCH in band II and V
0. Use AT Command CGDCONT to create two separate APNs, for instance PTA and Phone 1. Use the device as a modem to establish the first primary PDP Context with a dial up connection; 2. Access an internal web server or Ping via the established connection to verify the data connecton works fine; 3. Make the above data connection go into dormant state (e.g. release RB); 4. Establish the second Primary PDP context by using AT command or by pushing the MediaNet or web browsing key on the device; 5. Make the data connection go into dormant state (e.g. release RB) for about 10 seconds, then start web browsing or Ping from the first data connection again. 6. Device shall send Service Request message to SS. In the Service Request message, it shall set both bit nsapi5 =1 and nsapi6 =1 in the IE PDP Status, but set bit nsapi5=1 and nsapi6=0 in the IE UplinkDataStatus. Otherwise, test case shall fail. 7. Deactivate both PDP contexts.
(a) Activate a 3G 1900 cell with good RF condition (b) Power on TU to register to the Network (c) Prompt TU to have its ActiveSync Client Activated and then initiate a PS session (browse a internal web page from the device) (d) After TU successfully initiate a PS data session, prompt it to initiate a voice call. (e) Dial a voice call through the TU. (f) After the voice call is connected, wait 3 seconds, then send a PDP Context Deactivation Request from NW Simulator to the TU. (g) Wait 40 seconds to 10 minutes, check whether the voice call channel still exists or not by listening to the handset. If the voice call is dropped or voice channel does not exist, then the test case fails, otherwise, the test case passes.
(a) Activate a 3G 850 cell with good RF condition (b) Power on TU to register to the Network (c) Prompt TU to have its ActiveSync Client Activated and then initiate a PS session (browse a internal web page from the device) (d) After TU successfully initiate a PS data session, prompt it to initiate a voice call. (e) Dial a voice call through the TU. (f) After the voice call is connected, wait 3 seconds, then send a PDP Context Deactivation Request from NW Simulator to the TU. (g) Wait 40 seconds to 10 minutes, check whether the voice call channel still exists or not by listening to the handset. If the voice call is dropped or voice channel does not exist, then the test case fails, otherwise, the test case passes.
(a) Activate a 3G 850 cell with good RF condition (b) Power on TU to register to the Network (c) Prompt TU to initiate a PS session (browse an internal web page from the device) (d) After TU successfully initiate the PS data session, then initiates a MT voice call; (e) Wait 15 seconds, NW simulator sends a PS Signaling Connection Release to TU but keep voice call still alive. TU will be in PMM-Idle mode. (f) NW simulator sends a Page type II message (with P-TMSI) to the TU for a Terminating Interactive/Background (PS) call. (g) As TU is now in PMM-Idle mode, it shall send a Service Request (paging response) to NW. If not, test case fails.
1. Establish the first Primary PDP context by using AT command or by pushing the MediaNet or web browsing key on the device; 2. Make the above data connection go into dormant state (e.g. release RB); 3. Use the device as a modem to establish the second primary PDP Context with a dial up connection; 4. Access an internal web server via the established dial up connection to verify the data connecton works fine; 5. Make the data connection go into dormant state (e.g. release RB) for about 10 seconds, then start web browsing from the second data connection again. 6. Device shall send Service Request message to SS. In the Service Request message, it shall set both bit nsapi5 =1 and nsapi6 =1 in the IE PDP Status, but set bit nsapi5=0 and nsapi6=1 in the IE UplinkDataStatus. Otherwise, test case shall fail. 8. Deactivate both PDP contexts.
1. Use the device as a modem to establish the first primary PDP Context with a dial up connection; 2. Access an internal web server via the established connection to verify the data connecton works fine; 3. Make the above data connection go into dormant state (e.g. release RB); 4. Establish the second Primary PDP context by using AT command or by pushing the MediaNet or web browsing key on the device; 5. Initiate a MO voice call; 6. Make the data connection go into dormant state (e.g. release RB) for about 10 seconds, then start web browsing from the first data connection again. 7. Device shall send Service Request message to SS. In the Service Request message, it shall set both bit nsapi5 =1 and nsapi6 =1 in the IE PDP Status, but set bit nsapi5=1 and nsapi6=0 in the IE UplinkDataStatus. Otherwise, test case shall fail. 8. Release voice call and deactivate both PDP contexts.
0. Use AT Command CGDCONT to create two separate APNs, for instance PTA and Phone 1. Establish the first Primary PDP context by using AT command or by pushing the MediaNet or web browsing key on the device; 2. Make the above data connection go into dormant state (e.g. release RB); 3. Initiate a MT voice call; 4. After the voice call is set up successfully, use the device as a modem to establish the second primary PDP Context with a dial up connection; 5. Access an internal web server via the established dial up connection to verify the data connecton works fine; 6. Make the data connection go into dormant state (e.g. release RB) for about 10 seconds, then start web browsing from the second data connection again. 7. Device shall send Service Request message to SS. In the Service Request message, it shall set both bit nsapi5 =1 and nsapi6 =1 in the IE PDP Status, but set bit nsapi5=0 and nsapi6=1 in the IE UplinkDataStatus. Otherwise, test case shall fail. 8. Release voice call and deactivate both PDP contexts.
S2 if reconfiguration fails
S1 if the device does not send its UL Data Status IE in the Service Req
S1 if the device does not send its UL Data Status IE in the Service Req
ort PS and CS call assuming Multi-RAB support is required. S2 if RAB/SRB combination configuration fails
ort PS and CS call assuming Multi-RAB support is required. S2 if device does not support multiple PS sessions simultaneously.
ort PS and CS call assuming Multi-RAB support is required. S2 if device does not support multiple PS sessions simultaneously.
ort PS and CS call assuming Multi-RAB support is required. S2 if device does not support multiple PS sessions simultaneously.
ort PS and CS call assuming Multi-RAB support is required. S2 if device does not support multiple PS sessions simultaneously.
ort PS and CS call assuming Multi-RAB support is required. S2 if device does not support multiple PS sessions simultaneously.
ort PS and CS call assuming Multi-RAB support is required. S2 if device does not support multiple PS sessions simultaneously.
S sessions simultaneously.
ort PS and CS call assuming Multi-RAB support is required. S2 if device does not support 2 PS sessions simultaneously.
S sessions simultaneously.
sessions simultaneously.
ort PS and CS call assuming Multi-RAB support is required. S2 if device does not support multiple PS sessions simultaneously.
ort PS and CS call assuming Multi-RAB support is required. S2 if device does not support multiple PS sessions simultaneously.
ort PS and CS call assuming Multi-RAB support is required. S2 if device does not support multiple PS sessions simultaneously.
ort PS and CS call assuming Multi-RAB support is required. S2 if device does not support multiple PS sessions simultaneously.
ort PS and CS call assuming Multi-RAB support is required. S2 if device does not support multiple PS sessions simultaneously.
ort PS and CS call assuming Multi-RAB support is required. S2 if device does not support multiple PS sessions simultaneously.
ort PS and CS call assuming Multi-RAB support is required. S2 if device does not support multiple PS sessions simultaneously.
sessions simultaneously.
S sessions simultaneously.
us IE or UplinkDataStatus IE correctly
us IE or UplinkDataStatus IE correctly
ata Status IE in the Service Request (Data) message when it has data to send on one of its dormant PDPs. S1 if voice call can no
ata Status IE in the Service Request (Data) message when it has data to send on one of its dormant PDPs.S1 if voice call can not
sions simultaneously.
sions simultaneously.
sions simultaneously.
sions simultaneously.
sions simultaneously.
sions simultaneously.
imultaneously.
sions simultaneously.
sions simultaneously.
sions simultaneously.
sions simultaneously.
sions simultaneously.
sions simultaneously.
sions simultaneously.
ant PDPs. S1 if voice call can not be setup successfully or voice call is dropped during the testing.
ant PDPs.S1 if voice call can not be setup successfully or voice call is dropped during the testing.