0 оценок0% нашли этот документ полезным (0 голосов)
45 просмотров3 страницы
Millitech series OMT orthomode transducers are used to combine or separate two orthogonal linearly-polarized signals simultaneously. Typical output port is a circular waveguide, which can support both linear polarizations or circular (left-hand and right-hand) polarization.
Millitech series OMT orthomode transducers are used to combine or separate two orthogonal linearly-polarized signals simultaneously. Typical output port is a circular waveguide, which can support both linear polarizations or circular (left-hand and right-hand) polarization.
Авторское право:
Attribution Non-Commercial (BY-NC)
Доступные форматы
Скачайте в формате PDF, TXT или читайте онлайн в Scribd
Millitech series OMT orthomode transducers are used to combine or separate two orthogonal linearly-polarized signals simultaneously. Typical output port is a circular waveguide, which can support both linear polarizations or circular (left-hand and right-hand) polarization.
Авторское право:
Attribution Non-Commercial (BY-NC)
Доступные форматы
Скачайте в формате PDF, TXT или читайте онлайн в Scribd
E EL L E E6 6T T R R| | 6 6A AL L 8 8P PE E6 6| | F F | | 6 6A AT T| | 0 0N N8 8
Performance Parameter Specification Frequency Range (GHz) 18 to 100* 1
Bandwidth* 2 --- solation* 3 (dB) 25 to 40 dB VSWR* 4 1.4:1 Power Handling (Watts CW) (not tested) 100 *1 Higher frequencies quoted upon request *2 Please contact Millitech to discuss bandwidth options *3 Depending on requirements *4 Typical value. Lower VSWR option may be available depending on requirements
0 0R RT Th h0 0H H0 00 0E E T TR RA AN N8 80 0U U6 6E ER R8 8 F FE EA AT T U UR RE E8 8: : High isolation (greater than 25 dB) Broadband operation Low insertion loss
A AP PP PL L | | 6 6A AT T | | 0 0N N8 8: : Dual-polarized radar antennas Radiometers Diplexer for communications links 0 0E E8 86 6R R| | P PT T | | 0 0N N
Millitech series OMT orthomode transducers are used to combine or separate two orthogonal linearly-polarized signals simultaneously. Typical output (or input port) is a circular waveguide, which can support both linear polarizations or circular (left-hand and right-hand) polarization, and is generally connected to an antenna feedhorn.
Greater than 25 dB isolation between the two linear polarizations is achieved over a significant portion of the waveguide band. The orthomode transducer has both output linear polarization ports in rectangular waveguide, as it incorporates a built-in transition from circular-to-rectangular waveguide.
Millitech also offers orthomode transducers that cover over 50% of the waveguide band.
M Mi il ll li im me et te er r- -W Wa av ve e T Te ec ch hn no ol lo og gy y & & S So ol lu ut ti io on ns s
Millitech, nc. 29 ndustrial Dr. East Northampton, MA 01060 Ph. (413) 582-9620 Fax (413) 582-9622 Email: info@millitech.com Web Site: www.millitech.com
IS000023 REV00 RELEASE DATE: 3/15/04
0 0U UT T L L| | N NE E 0 0R RA Aw w| | N NC C8 8
H HE E6 6h hA AN N| | 6 6A AL L 8 8P PE E6 6| | F F | | 6 6A AT T | | 0 0N N8 8
ModeI Number OMT-42 OMT-28 OMT-22 OMT-19 OMT-15 OMT-10 A (in/mm) 3.75/95 2.50/64 1.93/49 2.15/55 2.00/51 1.62/41 B (in/mm) 2.75/70 1.66/42 1.21/31 1.40/36 1.28/33 .90/23 C (in/mm) 1.75/44 1.10/28 1.10/28 1.10/28 1.10/28 1.10/28
h h0 0w w T T0 0 0 0R R0 0E ER R
Specify ModeI Number OMT-XX-ABCCC XX = Waveguide Band WR number A = Flange Type* (rectangular waveguide) R - round (not available in WR-42) S - square (WR-42 and WR-28 only) B = Flange Type (circular waveguide) R - round (not available in WR-42) S - square (WR-42 and WR-28 only) P - pin contact (WR-08 and WR-06 only) CCC = Circular Waveguide Diameter (in inches) See Waveguide Sizes TabIe (on next page) *For WR-42 and WR-28 waveguide pIease specify threaded or cIear mounting hoIes
M Mi il ll li im me et te er r- -W Wa av ve e T Te ec ch hn no ol lo og gy y & & S So ol lu ut ti io on ns s
Millitech, nc. 29 ndustrial Dr. East Northampton, MA 01060 Ph. (413) 582-9620 Fax (413) 582-9622 Email: info@millitech.com Web Site: www.millitech.com
IS000023 REV00 RELEASE DATE: 3/15/04
6 6| | R R6 6U UL LA AR R w wA AV VE EC CU U| | 0 0E E 8 8| | Z Z E E8 8
RectanguIar Waveguide Band CircuIar Diameter Size Frequency Range (GHz)* CircuIar Waveguide Diameter (in/mm) Specify When Ordering Large 17.5-20.5 0.455/11.56 455 Medium 20.0-24.5 0.396/10.06 396 K Small 24.0-26.5 0.328/8.33 328 Large 26.5-33.0 0.315/8.00 315 Medium 33.0-38.5 0.250/6.35 250 Ka Small 38.5-40.0 0.219/5.56 219 Large 33.0-38.5 0.250/6.35 250 Medium 38.5-43.0 0.219/5.56 219 Q Small 43.0-50.0 0.188/4.78 188 Large 40.0-43.0 0.210/5.33 210 Medium 43.0-50.0 0.188/4.78 188 U Small 50.0-60.0 0.165/4.19 165 Large 50.0-58.0 0.165/4.19 165 Medium 58.0-68.0 0.141/3.58 141 V Small 68.0-75.0 0.125/3.18 125 Large 60.0-66.0 0.136/3.45 136 Medium 66.0-82.0 0.125/3.18 125 E Small 82.0-90.0 0.094/2.39 094 Large 75.0-88.0 0.112/2.84 112 W Small 88.0-110.0 0.094/2.39 094 Large 90.0-115.0 0.089/2.26 089 F Small 115.0-140.0 0.075/1.91 075 Large 110.0-140.0 0.073/1.85 073 D Small 140.0-160.0 0.059/1.50 059 Large 140.0-180.0 0.058/1.47 058 G Small 180.0-220.0 0.045/1.14 045 --- --- 170.0-260.0 0.049/1.25 049 --- --- 220.0-325.0 0.039/0.99 039 * * f the required frequencies fall within two waveguide diameter sizes, the larger one should be selected.