Академический Документы
Профессиональный Документы
Культура Документы
tender
AN-V Version
Main Features
Wireless data acquisition system dedicated to analog sensors Unipolar or bipolar voltage measurement (software configurable): bipolar: 5 V , unipolar: 0 10 V bipolar: 10V, unipolar: 0-20 V 100% Wireless Technology : the sensor power source is provided by the BeanDevice (4.5V to 20V) Excellent radio link budget thanks to the antenna diversity & a high power RF Front-End designed by BeanAir Current consumption in sleeping mode : < 30 A whatever the sensor technology Number of Input Channels : 2 or 4 channels High measurement accuracy: < 0.08% Maximum Radio Range : 1000m (L.O.S) Embedded Datalogger : up to 1.000.000 data acquisition records (with events dating) OPC server allowing real time access from your IT system to the BeanScape (available on BeanScape Premium+) Entirely autonomous system with an integrated primary cell Plug and Play installation : requires no knowledge of wireless technology Extended operating temperature range: 40C to +85C IP65 Watertight aluminium enclosure suitable for harsh industrial environment M12 Sensor connector with IP67 degree of protection
Applications
Remote monitoring Bridge Monitoring Greenhouse Water-treatment plant
ProcessSensor
Remote configuration and monitoring
tender
AN-V Version
OTAC*
OPC Server**
The BeanScape application allows the user to view all the data measurements transmitted by the BeanDevice AN-V Xtender. With the OTAC (Over-the-Air configuration) feature, the user can remotely configure the BeanDevice AN-V Xtender . Several Data acquisition modes are available on the BeanDevice AN-V Xtender:
Low Duty Cycle Data Acquisition mode (LDCDA): the data acquisition is immediately transmitted by radio. The transmission frequency can be configured from 1s to 24h. Alarm Mode : the measured value is transmitted by radio whenever an alarm threshold (fixed by the user) is detected (4 alarms threshold levels High/Low). Survey Mode : operates like the Alarm mode but the device sends frequently a beacon frame informing its current status.
The BeanScape Premium+ integrates an OPC DA server (Data Access). OPC DA is particularly well suited for real time measurement and data sharing. Each data/measurement can be associated to a tag or its attributes and shared with one or many OPC clients.
AN-V
tender
*Over-the-Air Configuration
STEP 1
STEP 2
STEP 3
ProcessSensor
tender
AN-V Version
The battery autonomy of the BeanDevice AN-420 Xtender is enhanced by the ability to directly power supply the sensor (4.5-20V). This power supply is completely servo-controlled by the embedded software. The sensor excitation voltage is remotely configurable through the BeanScape.
M12 Plug
ProcessSensor
tender
Product reference BND-ANV-XTD-NCH-MR-WP MR-Measurement Range - 5 : 5V measurement range - 10: 10V measurement range
AN-V Version
N- Number of data acquisition channels : - 2 : 2 Channels - 4 : 4 Channels WP Wireless Protocol - IEEE : IEEE 802.15.4 (2006)
Example 1 : BND-ANV-XTD-2CH-5-IEEE BeanDevice AN-V Xtender with two channels , measurement range: 5V , IEEE 802.15.4(2006) Example 2: BND-ANV-XTD-4CH-10-IEEE BeanDevice AN-V Xtender with four channels , measurement range: 10V , IEEE 802.15.4(2006) Analog data acquisition specifications Signal Conditionning Number of channels A/D Converter Measurement range (analog polarity is configurable from the BeanScape) Non-linearity error Measurement accuracy @25C Sensor Connector Analog voltage measurement 2 or 4 Channels 16 bits - SAR Architecture (Successive Approximation Register) with temperature compensation RBND-ANV-XTD-NCH-5-IEEE-BT: 5V (bipolar) or 0-10 V (unipolar) BND-ANV-XTD-NCH-10-IEEE-BT: 10V (bipolar) or 0-20 V (unipolar) 0,5 LSB < 0,08% M12-5Pins, degree of protection IP67 Sensor Power Supply specifications 4.5 Volts to 20Volts , configurable from the BeanScape software - 0.1% on the FS 1,5 Watts RF Specifications Wireless Protocol Stack WSN Topology Encryption Data rate RF Characteristics TX Power Receiver Sensitivity Maximum Radio Range Antenna IEEE 802.15.4 (2006 version) Point-to-Point / Star AES 128 bits (AES integrated coprocessor) 250 Kbits/s ISM 2.4GHz 16 Channels. Antenna diversity architecture designed by BeanAir +0 dBm to +18 dBm -95,5 dBm to -104 dBm 1 Km (L.O.S) Antenna diversity : 2 omnidirectional N-Type antenna with a gain of 2.2 dBi Degree of protection IP67
Excitation Voltage Excitation Voltage Accuracy (@25C) Maximum Output Power (@25C)
ProcessSensor
tender
AN-V Version
Over-the-air configuration (OTAC) parameters Low Duty Cycle Data Acquisition (LDCDA) Mode: 1s to 24 hour Alarm & Survey mode: 1s to 24 hour 2 high levels alarms & 2 low levels alarms 4.5 to 20 Volts Sleeping, Sleeping with Network Listening & Active -7 dBm / -1 dBm / 5 dBm / 11 dBm / 15 dBm / 18 dBm
Embedded logger
Others specifications Storage Capacity : up to 1 000 000 measurements Integrated real time clock
Primary Cell Temperature monitoring Current accumulation measurement During data acquisition : 70mA to 180 mA (depends on external sensor power
Current consumption @ 3,3V Operating Temperature Enclosure Shocks resistance Norms Primary cell
consumption)
During sleeping: < 30 A -40 C to +85 C - Integrated temperature sensor (resolution 0.125C) Aluminium, Watertight IP65 Fire Protection : ULV94/Getex Enclosure dimensions (without antenna ) L x l x h : 146.05 mm x 65.5mm x 33.5 mm Weight: 690 grams 10g during 50 ms CE Labelling Directive R&TTE (Radio) ETSI EN 300 328 ROHS - Directive 2002/95/EC Lithium-thionyl chloride 5,5Ah
Product specifications are subject to change without notice. Contact Beanair for latest specifications.
MADE IN FRANCE
ProcessSensor
tender
AN-V Version
Indoor Version
AN-V
tender
OR
OPC Server*
Outdoor Version
Description
StarterKit Reference
Starterkit Wireless System acquisition Beandevice AN-V Xtender 1 x BeanGateway Ethernet (Indoor version), Ref: BGTW-ETH-IND 1 x BeanDevice AN-V Xtender with our data acquisition channels Ref: BND-ANV-XTD-4CH-IEEE 1 x Beanscape Basic, Ref: BNSC_BASIC Starterkit Wireless System acquisition Beandevice AN-V Xtender 1 x BeanGateway Ethernet (Outdoor version), Ref.: BGTW-ETH-OUT 1 x BeanDevice AN-V Xtender with four data acquisition channels Ref: BND-ANV-XTD-4CH-IEEE 1 x Beanscape Basic, Ref: BNSC_BASIC
SK_BND_ANV_XTD_4CH_IND
SK_BND_ANV_XTD_4CH_OUT
The BeanDevice AN-V Xtender operates only on our Wireless Sensor Networks , you will need the BeanGateway and the BeanScape for starting a wireless sensor Network .