Академический Документы
Профессиональный Документы
Культура Документы
Page 1 of 10
The measurements within this text and 2D documentation are given both in milimeters and inches (in brackets).
Page 2 of 10
Parts List
Page 3 of 10
Assembly Drawing
Page 4 of 10
Page 5 of 10
Page 6 of 10
Page 7 of 10
Page 8 of 10
Standard Parts
Page 9 of 10
Assemblage Instructions
1. Carefully put Middle Plank (Part 1) and Side Planks (Parts 2) in preordained position, fasten them together with clamp, then drill the hole D8mm (D0,31 Inches) as given in 2D documentation.
2. Fasten the Middle Plank (Part 1) and the Side Planks (Parts 2) by using Axle (Part 3), Washers D8mm (Parts 8), Spring Lock Washers D8mm (Parts 10) and Wing Nuts M8 (Parts 9)
Page 10 of 10
3. Fasten the Horizontal Plank (Part 4) to the subassembly made in the previous step by using Bolts M6 x 90mm (Parts 5), Washers D6mm (Parts 6) and Wing Nuts M6 (Parts 7)