Академический Документы
Профессиональный Документы
Культура Документы
3)
W-Planning (v1.3) plug-in instructions. Directory 1.1 Data produced part 2 1.1.1 source data making 2 (1) GSM Data Format 2 (2) the WCDMA data format 3 (3) adjacent areas data 1.1.2 cell information table imported into MapInfo 5 1.1.2.1 Importing Workers Participation 5 1.1.3 data update 6 1.1.3.1 update existing residential workers refs 6 1.1.3.2 new base station 7 1.2 Basic functions 7 1.2.3 Planning Tools 9 1.2.3.1 GSM frequency planning applications: 9 1.2.3.2 WCDMA scrambling code planning applications: 10 1.2.4 adjacent cell tools: 11 1.2.4.1 database analysis: 11 1.2.4.2 query and display positive and negative relationship to the adjacent cell 12 1.2.5 the analog coverage analysis tool: 15 1.2.6 Tools 16
W-Planning plug is a plug-in based on MapInfo development for WCDMA / GSM network settings
1 / 17
W-Planning(V1.3)
check and optimization. The advantage is intuitive and easy to operate. The main functions are: NodeB / BTS base station information of the map; in accordance with the cell number, fuzzy station name searches for a cell; GSM frequency planning WCDMA scrambling code planning; In accordance with the BSC (RNC) / the LAC simulation boundaries geo-; cell simulation coverage; 2/3G neighbor cell optimization; check and graphical way adjacent areas;
2 / 17
W-Planning(V1.3)
1.1 GSM_Site.csv (2) WCDMA data format LAC_CI -------------------------------------- cell identification items, such as 14466_55001 required; LAC ------------------------------------- LAC region required; CI -------------------------------------- cell number, such as 55001, required; NodeBID ------------------------------------- station number, optional; NodeBName --------------------------------- site name required; Cell_Name -------------------------------- district names, such as water juncture -1, required; RNCID --------------------------------------------- vest RNC , required; UARFCN ---------------------------------------- frequency, required; P-SC ----------------------------- scrambling code, required Longitude / Latitude --------------- base station latitude and longitude, required Azimuth ---------------------------------- azimuth, full to the station 360, change the fill length ------------------------------------- geographical cell coverage system; Figure 1.2 WCDMA_Site.csv
3 / 17
W-Planning(V1.3)
Users can also extend a series of properties for base station identification, such as the configuration of the routing area, antenna height, auxiliary carrier frequency, down tilt, coverage, business offices, timeshare partition information, the column name and content of these attributes can customize (3) adjacent areas data Written examples bscname PT_BSC512 s_network 2G s_lac 14466 s_cellid 50272 sitename BS5027_JiangKouPingMin-27 d_network 2G d_lac 14353 d_cellid 10582 BCCH_UARF 110 CN bsic_psc 21 direction 2G_2G
Note: s_network / d_network fill out the norms for 2G (3G), direction fill specification 2G_2G/2G_3G/3G_3G/3G_2G
4 / 17
W-Planning(V1.3)
1.1.2 cell information table imported into MapInfo Basic data table, Complete specification check, run the plug-in, as shown:
1.1.2.1 Importing participated Create Map With GSM_Site, select the menu Run screen as follows:
Similarly select Create Map With WCDMA Site, Import Neighbor two were introduced into, WCDMA, and adjacent areas
5 / 17
W-Planning(V1.3)
modify cell data (Figure 1.1.3.1) shows directly modify => Save, latitude and longitude changes to refresh a layer, you can select the cell has changed after Figure 1.1.3.2refresh data menu) Note that the update position must LAC_CI, LAC, CI data fill in the correct
6 / 17
W-Planning(V1.3)
Figure 1.1.3.2 refresh Layer 1.1.3.2 new base stations Simple way to change the layer is programmable, then copy an existing base station, drag the newly added cell layer, after modifying the information, select Refresh, add the site can be completed 1.2 Basic functions Introduction to shortcut buttons
(1) Open the Layer (2) cell search (3) GSM frequency planning (on a frequency) (4) GSM frequency planning (next frequency point) (5) WCDMA scrambling code planning (on a scrambling code) (6) WCDMA (a scrambling code), scrambling code planning (7) adjacent areas lookup (forward lookup) (8) adjacent areas Find (reverse lookup) (9) BSC / RNC of geographic boundaries (10) LAC geography of boundaries (11) to open the Legend (12) Export Google Kml file (13) Refresh Layer 1.2.1 Open table command description: In menu bar "open work table ..." command, or click on the button (below the toolbar (red). Execute this command in the specified folder open Mapinfo Table. Course can also open the Open menu in Mapinfo Tablecorresponding form, based on the need to select the appropriate form Need To open the form must be in the same directory
7 / 17
W-Planning(V1.3)
Select the network you want to find, search input cell number, cell name, exact match, the center display, and displays the corresponding Messagel, as
8 / 17
W-Planning(V1.3)
1.2.3 Planning Tools 1.2.3.1 GSM frequency planning application: The 12 cell carrier configuration tool queries using red, blue, and green shows the BCCH frequency planning TCH1 to TCH12. Related command has "Find frequency" "Find previous frequency" "Find next frequency" Query effect as follows. And the tool also provides a shortcut button (uppercase state P under a frequency / N frequency)
9 / 17
W-Planning(V1.3)
10 / 17
W-Planning(V1.3)
Tools 1.2.4 neighboring cells: Tools main menu neighboring cells as shown below, the main function of the whole network neighbor data analysis, forward and reverse neighbor cell relations to query and display; unidirectional the adjacent areas queries (2/3G)
The 1.2.4.1 database analysis: "Find Single Way neighbor" Analysis of the whole network of one-way neighbor. The analysis relates only to Neighbor data table. Neighbor data necessary for the columns included in the data related to the source cell, the data of the target cell, as follows: The source cell Data: bscname, s_network s_lac s_cellid Target cell data: d_network, d_lac, d_cellid Global labeling: direction The operator interface is as follows:
11 / 17
W-Planning(V1.3)
(1) Export Single Direction_neighbor.csv export one-way adjacent areas statements in C :/ OneWay.csv (2) Show Single Direction neighbor sub-project is completed, the geographical one-way adjacent areas, easy and intuitive to reduce excessive inspection process. 1.2.4.2 query and display positive and negative relationship to the adjacent cellQuery must be used Mapinfo neighbor cell relations Tools, this tool CELL map, click on the desired query cell, and then choose a command below, to complete the normal or reverse neighboring cells query "Displpay Neighbors for a selected cell": used to the forward adjacent cell relationship query and display (cut out). "Displpay a cell Neighbors in backward": for reverse neighbor cell relations to query and display (cut into). As an optional user also can choose to use the execute command Ankuaichajian (1) GSM neighbor cell Find The following is a GSM cell forward lookup effect diagram
12 / 17
W-Planning(V1.3)
Description: the gray lines 2G_2G the adjacent areas, green lines for a 2G_3G the relationship between adjacent areas The following is a GSM cell reverse lookup effect diagram
Description: gray lines the adjacent areas 2G_2G, brown lines adjacent areas for 3G_2G
(2) Find WCDMA adjacent cell WCDMA cell forward lookup effect diagram
13 / 17
W-Planning(V1.3)
Description: red lines for 3G_3G adjacent areas, brown lines adjacent areas for 3G_2G
Description: red lines for 3G_3G adjacent areas, and green lines for 2G_3G relationship between adjacent areas
14 / 17
W-Planning(V1.3)
1.2.5 analog coverage analysis tool: Daily work, we often need to have a rough idea of network coverage, such as the division of each BSC, LAC division and cell cellular analog coverage area, this tool, you can achieve the automatic calculation of BSC / LAC regionanalog zoning, and marked with different colors.
Tools can tie Toolmate "Embed Thematic in map" the inside layers Legend, which is more convenient to view, the effect is as follows:
15 / 17
W-Planning(V1.3)
1.2.6 Tools
(1) "Embed Thematic in map" layers within Legend (2) "Export mapinfo2google" export mapinfo Pictured google Note, this operation requires you can not maximize and minimize the window, as shown in that window, and Figure operation for the display of all objects as
16 / 17
W-Planning(V1.3)
To display the Label. Layer Control operation, after the completion of the above operation, you can export the complete GOOGLE kml file after export Save KML file in UTF-8 format output
17 / 17