Академический Документы
Профессиональный Документы
Культура Документы
CO/HC/Nox Analysers
Smoke meter
8 9
Solar flat plate water heater test rig Instruments for measuring solid / liquid / gas fuels properties
10 11 12
Solar Radiation measuring instruments Non-IBR Boiler test rig Heat exchanger test rig
13
Fuel Cell
EXPERIMENTAL FOUR-STROKE FOUR CYLINDER (MULTICYLINDER) PETROL ENGINE (ISUZU) WITH HYDRAULIC DYNAMOMETER TEST RIG: MORSE TEST
AUTO EXHAUST GAS ANALYZER (Two Gas Analyzer CO /HC) AUTO EXHAUST GAS ANALYZER (FOUR gas analyzer CO/CO2/02/HC) AUTO EXHAUST GAS ANALYZER (FIVE gas analyzer) SMOKE METER
Solar flate plated water heater test rig BOMB CALORIMETER JUNKERS GAS CALORIMETER SOLAR RADIATION MEASURING INSTRUMENTS OIL FIRED STEAM BOILER
ALMECH ENTERPRISE OUR TERMS AND CONDITIONS OF BUSINESS 1. QUOTATION: All quotation is subjected to prior sale and alteration without notice.
2. Orders: orders, once placed with us or our approved dealers, cannot be cancelled on any account but no
order shall become a contract or be binding on us in any way until we have DIRECTLY confirmed it in writing, where the buyer fails to received such confirmation with in 30 days of his placing order, the order shall be deemed to have been rejected.
3. Supply: Buyers shall be entitled only to the supply of the goods and accessories expressly specified in
5. Packing: In the absence of any specific instructions, goods will be sent unpacked at our discretion. If sent packed the packing will be according to our usual practice, and charged at our standard rates. 6. Insurance: Unless instructed to the contrary and agreed by us, the goods will be sent uninsured and at the buyers risk only 7. Transport: All deliveries are and shall always be deemed to be ex-factory, not withstanding goods being consigned to selves. Our responsibility will cease once the goods leave our shops where we attend to transport, it is to be clearly understood that we do so only on behalf of buyer as his agent and without any responsibility what over for any loss of damage in transit. 8. Delivery : (a) We accept no liability for non-fulfillment of contract by us on account of strikes, lock-outs, riots, civil commotions, shirts supply of raw materials acts of government natural calamities or other reasons beyond our control. Similarly we accept no liability for delay in delivery time is of the essence of the contractor not. All dates stipulated for delivery of the goods or any part there of are only estimates based on normal conditions and are subject to variation with or without notice to the purchaser. We will use our
best Endeavour to keep the dates given, but we distinctly decline any delayed delivery and in no case shall delay be a ground for rejection of goods, cancellation of the contract or claim for refund of deposit or advance. (b) We shall have the option to make deliveries in once lot or more, in parts or whole and realize values there of separately, (c) The buyer shall satisfy himself about the performance of the goods immediately on receipt of supplies; and if he had any complaints to make on account of any faulty design, defective construction, or use of bad materials in the goods, he shall do so within 14 days of their receipt and if so desired, shall send them back for inspection at our Works freight paid. If in the inspection his connection is found to be correct he will be entitled for a free replacement of faulty material within a reasonable time; and expect for the replacement, he shall have on other claim on us in the matter. (d) Replacement for goods miscarried or damaged in transit shall be only on a fresh contract to be separately negotiated for without prejudice to any rights and liabilities under the original contract. (e) Where the buyer alleges that suppliers are not in accordance with the contract, he shall notify us within three days of arrival of goods at destination no complaints shall be admissible after the expiry of three days. 9. Prices: Prices quoted and accepted are based on our present ruling prices and are subject to enhancement by us unto the time of delivery, and the order is therefore accepted on the clear and definite under standing that buyers agree to pay on demand any such price enhancement also as aforesaid. 10. Payment: Unless otherwise specifically agreed to orders shall be accompanied by not than 10% of their value as advance in the case of our Distributors, and by not less than 1/3 value in all other cases Balance of Price shall be paid on demand before dispatch or against R/R and documents through V.P or any scheduled bank. No payment shall binding on us unless acknowledge of our official receipt. 11. Storage: Where a buyer fails to remove the goods within 14 days of the date of intimation that goods are ready, he shall pay 1% of the values as godown charges. Where the buyer fails to remove the goods within a month of such intimation he shall forfeit all the rights to the goods and the advance he had paid for the order not withstanding such forfeiture, we shall have the right to proceed against then buyer at law for the recovery of the full value of the goods with costs. 12. All the contracts shall be deemed to have been made in Coimbatore and all proceedings which either party may be entitled to take against the other under the contract shall be instituted in a court of competent Jurisdiction in Coimbatore only.
3,99,000/-
89,000/-
69,000
75,000
90,800
2,75,800
confirmed it in
ressly specified in
ck-outs, riots, civil ther reasons essence of the nly estimates based aser. We will use our
receipt of supplies; uction, or use of red, shall send is found to be e time; and expect
ubject to he clear and definite as aforesaid. not than 10% of their ther cases Balance gh V.P or any ceipt. mation that goods are ve the goods vance he had paid nst then buyer at
Terms and Conditions 1) Delivery Within 8 to10 Weeks after receipt of confirm written order. 2) Payment 50% advance along with order remaining before dispatch.
4) Freight At actual. 5) Taxes VAT 5% Extra applicable. 6) Commissioning: Will be done by us. The necessary foundation, oil, power will be provided by you.
7) Validity : 30days
3,67,000/-
2,85,000/-
97,500/-
1,76,800/-
48,300/-
2,15,500/-
44,200/-
be provided by you.
Four cylinder, 4-stroke petrol engine test rig (Hydraulic dynamometer loading)
TERMS OF SUPPLY 1. The prices are FOB Works. Packing and forwarding 3% extra. Freight charges extra as applicable. Installation charges Rs.30,000 extra (if installation is required)..
2. Taxes and duties are as applicable at the time of delivery. Current rates are:
i.) Excise duty Nil ii) VAT as applicable (currently -5%). 3. Validity period- 60 days. 4. Delivery period- 10 to 12 weeks from the date of receipt of your firm order at our end.
5. Payment terms - 40% advance, balance against proforma invoice. Pre dispatch inspection at
our factory.
6. Guarantee - For a period of 12 months from the date of delivery against all manufacturing
defects.
SARANATHAN COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING COMPARITIVE STATEMENT FOR PG THERMAL LAB
Altech Industries 25/05/2012 Rs. 3,98,000 Remarks
19,000
3,68,000
19,000
Rs. 1,38,000
ges extra as
r at our end.
atch inspection at
manufacturing
ATHAN COLLEGE OF ENGINEERING MENT OF MECHANICAL ENGINEERING VE STATEMENT FOR PG THERMAL LAB
Multi cylinder 4 stroke, 3 Cylinder, water cooled, variable speed Brand new assembled petrol engine (Maruti) test rig suitable for Morse Test. With Hydraulic dynamometer / Eddy current load
Multi cylinder 4 stroke, 3 Cylinder, water cooled, variable speed Brand new assembled petrol engine (Maruti) test rig suitable for Morse Test. With Mechanical brake drum load
Multi cylinder 4 stroke, 4 Cylinder, water cooled, variable speed Brand new petrol engine (IZUZU) test rig suitable for Morse Test. With Hydraulic dynamometer / Eddy current load
Multi cylinder 4 stroke, 4 Cylinder, water cooled, variable speed Brand new petrol engine (IZUZU) test rig suitable for Morse Test.With Mechanical brake drum load
VAPOUR COMPRESSION REFRIGERATION TEST RIG WITH WATER COOLED CONDENSER FOR HEAT PUMP STUDIES.
TERMS :
Tax: VAT / CST @ 5% any other taxes/levies such as entry tax applicable will be charged extra.
Delivery: Within 8 to 12 weeks Payment: 40% advance, 50% against delivery, 10% on installation Guarantee : One year against all manufacturing defects.
Note: Power connections, Water connection, Masonry work, and labour etc. Wherever required are to be provided by the customer for installation
1,90,000/-
2, 80,000/-
2,40,000/-
Rs.45,000/-
Rs.95,000/-
Rs.45,000/-
80,000/70,000/-
ged extra.
Multicylinder Diesel engine test rigs - Computerised 4 Cylinder, 4 Stroke, Turbo Diesel, Tata Indica, Power 62 @ 4500 rpm, 1405cc with eddy current dynamometer.Engine type - Turbo, Multicylinder Diesel engine test rigs - 4 Cylinder, 4 Stroke, Turbo Diesel, Tata Indica, Power 62 @ 4500 rpm, 1405cc with eddy current dynamometer (Non computerised setup).Engine type - Turbo, Multicylinder Diesel engine test rigs - CComputerised 4 Cylinder, 4 Stroke, Turbo Diesel, Tata Indica CRDI BS IV, Power 70 PS @ 4500 rpm, 1405cc with eddy current dynamometer, Engine type - TurboCRDI Multicylinder Diesel engine test rigs - 4 Cylinder, 4 Stroke, Turbo Diesel, Tata Indica CRDI BS IV, Power 70 PS @ 4500 rpm, 1405cc with eddy current dynamometer (Non computerised setup), Engine type - TurboCRDI Multicylinder Petrol engine test rigs - Computerised 3 Cylinder, 4 Stroke, Petrol, Maruti 800, (MPFI), Power 27 Kw @ 5000rpm, 796cc with eddy current dynamometer. Multicylinder Petrol engine test rigs - Computerised 3 Cylinder, 4 Stroke, Petrol, Maruti 800, (MPFI), Power 27 Kw @ 5000rpm, 796cc with hydraulic dynamometer. Multicylinder Petrol engine test rigs - 3 Cylinder, 4 Stroke, Petrol, Maruti 800, (MPFI), Power 27 Kw @ 5000rpm, 796cc with eddy current dynamometer (Non computerised setup) Multicylinder Petrol engine test rigs - 3 Cylinder, 4 Stroke, Petrol, Maruti 800, (MPFI), Power 27 Kw @ 5000rpm, 796cc with Hydraulic dynamometer (Non computerised setup)
1,695,000.00
1,290,000.00
1,850,000.00
1,421,200.00
1,295,000.00
930,000.00
874,000.00
690,000.00
4,95,000.00
AVL Smoke meter for free acceleration test of diesel engines AVL Smoke meter free and full load acceleration test of diesel engines
3,95,000.00 5,25,000.00
Single cylinder VCR engine test rigs - Computerised VCR engine setup 1Cylinder, 4 Stroke, Diesel, constant speed, Power 3.5 kw @ 1500 rpm, CR range 12-18:1 with eddy current dynamometer. (with electric start) Single cylinder VCR engine test rigs - Computerised VCR engine setup 1Cylinder, 4 Stroke, Diesel, constant speed, Power 3.5 kw @ 1500 rpm, CR range 12-18:1 with hydraulic dynamometer.(with electric start) Single cylinder VCR engine test rigs - VCR engine setup 1Cylinder, 4 Stroke, Diesel, constant speed, Power 3.5 kw @ 1500 rpm, CR range 12-18:1 with eddy current dynamometer (Non computerised setup, with electric start) Single cylinder VCR engine test rigs - Computerised Research engine setup 1Cylinder, 4 Stroke, Multifuel, For Diesel: Power 3.5 kw @ 1500 rpm, CR range 12:1-18:1, For Petrol: Power 4.5 kw @ 1800 rpm, CR range 6:1-10:1 Optional Diesel injection pressure measurement system
Refrigeration and A/C test rigs - Computerized KTENG Korea make Standard Refrigeration Experimental Equipment with Data Acquisition System & software. Individual components can be operated directly from main panel or from PLC board or from relay circuits. Detailed technical specifications as per attached sheet. KTENG Korea make Air Handing Unit Experimental Equipment with Data Acquisition System & software. Detailed technical specifications as per attached sheet.
1,690,000.00
1,895,000.00
HELIOCENTRIS, GERMANY MAKE FUEL CELL TRAINING SYSTEM MODEL CLEAN ENERGY CONSISTING OF FUEL CELL, HYDROGEN GENERATION, SOLAR, WIND, DATA ACQUISITION & COMPUTER HELIOCENTRIS, GERMANY MAKE FUEL CELL TRAINING SYSTEM - CAP. 50W HELIOCENTRIS, GERMANY MAKE FUEL CELL TRAINING SYSTEM - CAP. 1.2KW TERMS & CONDITIONS
1. Prices: Prices quoted are Ex Delhi, all other charges (P&F, Freight, Insurance etc) will be charged extra.
2. Taxes: Will be charged extra as applicable at the time supply. Entry tax or any other state taxes if applicabl will be charged extra. 3. Payment: 40% as advance along with purchase order 60% against Performa Invoice before dispatch of materials .
4. Installation, commissioning & Training: Rs. 15,000/- per equipment. 5. Validity: Our quotation is valid for 45 days from the date of our quotation.
6. Delivery: The equipment will be delivered at the Institute within 14-20 weeks from the date of receipt of yo technically and commercially clear order.
8. Guarantee: The offered equipment are warranted for a period of 12months from the date of supply against any manufacturing in inadequacies, under proper use therein and arising sole out of faulty design, workmansh bad material or any other manufacturing defects etc. and we shall undertake to rectify any defect which in our opinion is due to the manufacturing inadequacies mentioned above free of cost during warrantee period. However any defect, breakage etc. arising out of careless handling, improper electrical voltage, improper maintenance, unauthorized repair, non following of operating manual etc. are not covered under this warrante
e before dispatch of
e date of supply against aulty design, workmanship, any defect which in our g warrantee period. l voltage, improper ered under this warrantee.
MULTI CYLINDER PETROL ENGINE TEST RIG (MAKE : HM Ambassador Engine) (Used) - Rope brake dynamometer
MULTI CYLINDER PETROL ENGINE TEST RIG (MAKE : HM Ambassador Engine) (Used) - Electrical dynamometer
MULTI CYLINDER PETROL ENGINE TEST RIG (MAKE : HM Ambassador Engine) (Used) -With Hydraulic Dynamometer
MULTI CYLINDER PETROL ENGINE TEST RIG (MAKE : HM Ambassador Engine / Maruthi Engine ) (Brand New) - With Rope brake dynamometer
MULTI CYLINDER PETROL ENGINE TEST RIG (MAKE : HM Ambassador Engine / Maruthi Engine ) (Brand New) - With Electrical dynamometer
MULTI CYLINDER PETROL ENGINE TEST RIG (MAKE : HM Ambassador Engine / Maruthi Engine ) (Brand New) - With Hydraulic Dynamometer
4-Gas Analyser
VARIABLE COMPRESSION RATIO PETROL ENGINE - Mechanical rope break loading break drum VARIABLE COMPRESSION RATIO PETROL ENGINE - with electrical loading VARIABLE COMPRESSION RATIO PETROL ENGINE - with eddy current dynameters loading
WORKING MODELS OF THE COOLING TOWER WITH ARRANGEMENTS FOR CONDUCTING TESTS
Terms And Conditions Price: F.O.R. Destination Sales Tax: TNGST @ 5% Extra As Per VAT
Payment: 50% Advance Along With the Order, 40% Against Proforma Invoice Before Dispatch And 10% after Demonstration.
Delivery: 10 to 12 weeks Validity: Our Offer Is Valid For A Period Of 30 Days From The Date Of Our Offer. Warranty : One Year against Any Inherent Manufacturing Defects from the Date of Supply.
Liability On Delivery: We Accept No Liability For Non Fulfillment Of Supply On Account Of Strikes, Lockouts, Civil commotion Supply Of Raw Materials, Acts Of Governments, Natural Calamities Or Other Reasons B Our control..
Reservation Of Supply: We Reserve The Right To Take Back The Payment As Per Agreed Terms Of Payment.
Technical Data/ Specification: We Reserve The Right To Make Changes Or To Pace With Technological Developments From Time To Time.
Introduce Improvements To K
Note: Please Note That the Delivery Period & Payment Term Being Primary Factors Of Acceptance Of The Purchase Orders & Implementing The Execution Of Any Purchase On First Come First Served Basis You Are Hereby Advised To Finalize Your Requirement Within The Validity O Offer Beyond Which Our Delivery Schedule Would Subject To Modification To Longer Period Of Supply.
260000
290000
320000
360000
390000
275000
245000
79850 78520
99850
e Date of Supply.
ply On Account Of Strikes, Lockouts, Riots, ral Calamities Or Other Reasons Beyond
To
nting The Execution Of Any Purchase Order r Requirement Within The Validity Of Our n To Longer Period Of Supply.
Smoke Meter
36500/-
6500
132000
143000
187000
66500
16500
77600
PRICE BASIS: EX. WORKS KOLHAPUR P & F: 5 % EXTRA TAXES & DUTIES: 1. EXCISE & CESS 12.36%. 2. VAT EXTRA AT 12.5 % OR CST 2 % AGAINST FORM C WHICHEVER IS APPLICABLE 3. OCTROI IF APPLICABLE SHALL BE CHARGED EXTRA.
FREIGHT: EXTRA AT ACTUAL INSURANCE: IN YOUR SCOPE MODE OF DESPATCH: BY ROAD THRO REPUTED TRANSPORTER
PAYMENT TERMS: 70 % ADVANCE WITH ORDER BALANCE AGAINST PROFORMA PRIOR TO DESPATCH BY DD PAYBLE AT KOLHAPUR OR DEPOSITE IN OUR BANK
BANK DETAILS: BANK : IDBI BANK, SHIVAJI CHOWK,KOLHAPUR A/C NO. : 46335010325134
DELIVERY PERIOD : FOUR WEEKS FROM THE DATE OF RECEIPT OF PURCHASE ORDER WARRANTY : 12 MONTHS
Rs.
2,40,500/-
92,625/-
87880/-
S.No. 1 2 3 4 5 6 7 8
List of Companies Almech Enterprises, Coimbatore 26/11/2011 Royal Quality Products, Chennai 30/11/2011 Altech Industries 25/05/2012 Consolidated Equipment Services, Alandur Chennai 24-05-12 Edutek Equipments (India) Pvt. Ltd., Delhi 01.06.2012 Elshaddai Engineering Equipments, Chennai 09.04.2012 Microteknik, Ambala, Haryana 09/05/2012 New Anucool, Kolhapur, 08/05/2012
Cost To College
Yes No
SARANATHAN COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING COMPARITIVE STATEMENT FOR PG THERMAL LAB
S.NO. EQUIPMENT NAME LIST AS PER ANNA UNIVERSITY Gas Analyser Almech Enterprises, Royal Quality Coimbatore Products, 26/11/2011 Chennai 30/11/2011 4,50,000 (Five Gas Analyser) Altech Industries Consolidated 25/05/2012 Equipment Services, Alandur Chennai Edutek Equipments (India) Pvt. Ltd., Delhi 4,95,000 (Five Gas Analyser) 3,95,000 (For free acceleration test of diesel Elshaddai Engineering Equipments, Chennai 2,75,000 (Four Gas Analyser) Microteknik, New Anucool, Ambala, Haryana Kolhapur, 09/05/2012 08/05/2012 36,500 (Five Gas AVL make or equivalent) 6,500 -
Smoke meter
1,32,000 (Performance Test Equipment) 1,43,000 (Performance Test Equipment) 1,87,000 (To Study Performance) 16,500 (Performance study)
Dropped
Rs.45,000 (Experimental)
Solar flat plate water heater test rig Instruments for measuring solid / liquid / gas fuels properties Bomb Calorimeter Solar Radiation measuring instruments
48,300
45,000
88,850
80,000/-
1,75,000
2,15,500
77600
Instruments for measuring solid / liquid / 9 88,950 70,000 gas fuels properties Junkers Gas Calorimeter * The total cost excludes the Freight, Packing and Forwarding, Taxes and Other Costs, connected with the commissioning like Civil Works, Structural Works, Consumbales Etc.,
SARANATHAN COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING PG THERMAL LAB - FINAL SELECTED COMPANY WITH THEIR PRICE 26/06/2012
S.NO. EQUIPMENT NAME LIST AS PER ANNA UNIVERSITY NAME OF COMPANY EQUIPMENT COST Rs.
Edutek Equipments (India) Pvt. Ltd., Delhi 01.06.2012 Elshaddai Engineering Equipments, Chennai 09.04.2012 Microteknik, Ambala, Haryana 09/05/2012 Microteknik, Ambala, Haryana 09/05/2012 Microteknik, Ambala, Haryana 09/05/2012 Microteknik, Ambala, Haryana 09/05/2012 Consolidated Equipment Services, Alandur Chennai 24-05-12 Consolidated Equipment Services, Alandur Chennai 24-05-12 Consolidated Equipment Services, Alandur Chennai 24-05-12
495,000
Smoke meter Variable Compression ratio petrol engine Variable Compression ratio diesel engine Cooling tower test rig Solar Radiation measuring instruments
245,000
3 4 5 6
Solar flat plate water heater test rig Instruments for measuring solid / liquid / gas fuels properties - Bomb Calorimeter Instruments for measuring solid / liquid / gas fuels properties - Junkers Gas Calorimeter TOTAL COST
45,000
80,000
70,000
1,474,600
S.No.
T&C Quoted Price is Excluding P& F, Freight, Insurance, All Other Taxes Installation, Commissioning & 14 - 20 weeks Delivery period. Validity: Our quotation is valid for 45 days from the date of our quotation.
Price: 2 Elshaddai Engineering Equipments, Chennai F.O.R. Destination Sales Tax: TNGST @ 5% Extra As Per VAT Delivery 10 to 12 weeks Our Offer Is Valid For A Period Of 30 Days From The Date Of Our Offer. Packing Will be Charge Extra Freight will bear by you cst@13.25% will be charged extra 4 Consolidated Equipment Services, Alandur Chennai Price : Ex works, freight charges extra Tax: VAT / CST @ 5% any other taxes/levies such as entry tax applicable will be charged extra. Delivery: Within 8 to 12 weeks Power connections, Water connection, Masonry work, and labour etc. are to be provided by the customer 3 Microteknik, Ambala, Haryana