Академический Документы
Профессиональный Документы
Культура Документы
Peo p le a re d ra wn to b e a u tifully des igned s tores that ex pres s the lates t. Peo p le wo rk b e st in o ffice s imbued with func tional beauty. D a ikin s SkyAir is th e ch o ice to bring high quality air c onditioning to st ore s a n d o ffice s like th is. Th a n ks to its ma n y a d va n ta g es s uc h as quiet operation, eas e of us e and f l exib le in sta lla tio n , th e SkyAir enjoy s an ex c ellent reputation throughout t he wo rld wh e re ve r it is u se d.
Cooling only
HP
1 Capacity * The values given for 2 HP6 HP is for FHC type, 6.5 HP7 HP is for FDMG type.
2 18,000
5.3 4,560
2.5 21,000
6.2 5,290
3 26,000
7.6 6,550
3.5 30,000
8.8 7,570
Btu/h kW kcal/h
FHC18NUV1
R18NUV1
FHC21NUV1
R21NUV1
FHC26NUV1
R26NUV1 / Y1
FHC30NUV1
R30NUV1 / Y1
FH21NUV1
R21NUV1
FH26NUV1
R26NUV1 / Y1
FH30NUV1
R30NUV1 / Y1
FDBG18NUV1
R18NUV1
FDBG21NUV1
R21NUV1
FDBG26NUV1
R26NUV1 / Y1
DUCT CONNECTION
Outdoor unit
FDMG26NUV1
R26NUV1 / Y1
FDMG30NUV1
R30NUV1 / Y1
OUTDOOR UNIT
R18NUV1 R21NUV1 R26NUV1 / Y1 R30NUV1 / Y1
*1. Note : Rated cooling capacities are based on the following conditions: Return air temp., 27CDB, 19.0CWB; outdoor temp. 35CDB. Equiv. refrigeration piping, 7.5 m (horizontal)
4 36,000
10.6 9,100
5 42,000
12.3 10,600
6 48,000
14.1 12,100
6.5 51,000
15.0 12,900
7 56,000
16.4 14,100
FHC36NUV1
R36NUV1 / Y1
FHC42NUV1
R42NUY1
FHC48NUV1
R48NUY1
FH36NUV1
R36NUV1 / Y1
FH42NUV1
R42NUY1
FH48NUV1
R48NUY1
FDMG36NUV1
R36NUV1 / Y1
FDMG42NUV1
R42NUY1
FDMG48NUV1
R48NUY1
FDMG51NUV1
R51NUY1
FDMG56NUV1
R56NUY1
R36NUV1 / Y1
R42NUY1
R48NUY1
R51NUY1
R56NUY1
CEILING MOUNTED
CASSETTE TYPE
FHC-NU
Sound level
Cooling only
FHC18NU48NU
42/36
High
Low
dB(A)
FHC36NU
(220V)
Option
Accessory required for indoor unit
BRC7C613W
Signal receiver unit (Installed type)
Wireless remote controller and signal receiver unit are sold as a set.
Features
Feature
Swing pattern selection
Comfort
High ceiling application Switchable fan speed
Mould prevention
Control features
High-efficiency filter
Auto swing
*1
*2
*1Applicable when wired remote controller is used *2Applicable to R36NUR48NU outdoor units
Programme "Dry"
Timer selector
Long-life filter
Auto-restart
Filter sign
Draft resistance has been reduced by incorporating, into a single unit, an impeller and a diffuser to control air flow inside the unit. The Diffuser Turbo Fan is both quiet during operation and compact.
Indoor unit High Low
(220V) dB(A)
950 mm
Blade
950 mm
33 35 35 39 42 42 42
29 30 30 34 36 36 36
Standard setting
For gentle drafts(Ceiling is soiled.)
Auto-swing between 10 and 65 Settable to 5 different levels between 10 and 65
Auto-swing 5-levels air direction setting Draft prevention (In heating mode) Auto air direction control
At heating startup and thermo OFF*, air discharge is automatically set to a near horizontal 10 to prevent direct exposure to cool air drafts.
The air direction is set automatically to the memorised position of the previous air direction. (Initial setting is 65 for heating and 30 for cooling.)
Note: Air direction is set to the standard position when the unit is shipped from the factory. The position can be changed from the remote controller.
Multi-Flow System
4-way flow
1 pattern
Each corner of the unit has an Adjuster Pocket that lets you easily adjust the unit's suspended height.
Note: If the wireless remote control option is installed, a light receptor unit is housed in one of the adjuster pockets.
3-way flow
4 pattern
Super Cassette
2-way flow
3 pattern
" " denotes piping direction. " " denotes sealing member for air discharge outlet (option) . Note: For 3-way or 2-way flow installation, the sealing member for air discharge outlet (option) must be used to close off the unused outlet(s).
(m) Conventional model 2.7 2.5 m/sec 2.0 m/sec 2 1.5 m/sec 1.0 m/sec 1 0.5 m/sec 4 (m) 3 2 1 0 1
(m) 3.2 3
2.5 m/sec 2 2.0 m/sec 1.5 m/sec 1.0 m/sec 1 0.5 m/sec 2 3 4 (m)
18NU26NU
4-way flow Standard Ceiling High ceiling height High ceiling 3-way flow 2-way flow
30NU48NU
4-way flow 3-way flow 2-way flow
2.7 m 3.0 m 3.5 m 3.2 m 3.6 m 4.2 m 3.0 m 3.3 m 3.8 m 3.6 m 4.0 m 4.2 m 3.5 m 3.5 m 4.2 m 4.2 m -
Note: Initial settings are for standard ceiling height and 4-way flow. High ceiling settings 1 and 2 are set from the remote controller.
Programme "Dry"
Dehumidification is microprocessor controlled to prevent abrupt and uncomfortable changes in air temperature.
FH-NU
Sound level
Cooling only
FH21NU48NU
46/40
High
Low
dB(A)
FH36NU
(220V)
BRC7NU66
Features
Feature
Comfort
Mould resistant treatment for filter Switchable fan speed
Mould prevention
Control features
Programme "Dry"
Timer selector
Long-life filter
*1
Auto-restart
Auto swing
Quiet operation
Sound operation has been reduced on the exposed ceiling suspended type unit.
(220V) dB(A)
Indoor unit
High
Low
21NU
44 44 45 46 48 49
40 40 40 40 42 43
100
Dehumidification is microprocessor controlled to prevent abrupt and uncomfortable changes in air temperature.
Note : Anechoic chamber conversion value, measured according to JIS parameters and criteria.
50
Easier to maintain
Long-life filter lasts about half year * maintenance not required
* For dust concentration of 0.15 mg/m
3
All wiring and internal servicing done from below the unit Pipes more easily rigged, too
Plastic panels are used to conceal piping holes. Holes can be easily punched out without requiring special tools.
Indoor unit 21NU 26NU 30NU 36NU 42NU 48NU Height Width Depth
195 1,160 1,400 680 1,590
Weight of all models reduced (down 10% compared with previous models). Transfer and installation work is less arduous.
30 mm
or more
1,590 mm
30 mm
or more
*Water used in the test-run can now be drained from the air discharge opening rather than from the side as was formerly the case.
DUCT CONNECTION
FDMG-NU
Unit can be mounted in the ceiling and air can be delivered freely by duct.
Superior freedom of layout
The duct system allows the efficient location of discharge outlets in accordance with the room layout Middle static pressure type, usable in a larger than standard space Duct connection is simpler with standard rear intake chambers
Ordinary duct (procured locally)
Air discharge
Quiet operation
(220V) dB(A)
Indoor unit
High
LOW
FDMG51NU FDMG56NU
Cooling only
FDMG26NU56NU
Option
45/37dB(A)
High Low
42 44 45 46 46 47 47
38 36 37 37 37 37 37
FDMG36NU
(220V)
Remote controller
Features
Feature
Comfort
Switchable fan speed
KRC47-2A KRC47-4A
KRC47-1A
*1
Simultaneous air conditioning of two rooms and ventilation grille (ventilation opening)
When air conditioning two rooms simultaneously, the air discharged into each room must be circulated back to the air conditioner. To achieve this, a ventilation duct should be installed for each room or one of the indicated ventilation grilles should be installed on the partitioning wall or under the door between the rooms.
Door-installed ventilation grille Wall-installed ventilation grille Under-door cutout
Partitioning wall
Ventilates air through the partitioning wall. (See right) Ventilation grille Ventilation grille Under-door cutout
Note: The under-door cutout method should be used only when there is a small volume of airflow.
Auto-restart
DUCT CONNECTION
FDBG-NU
Ideal for quiet, beautiful living spaces Suitable for condominiums and apartments, houses and hotels
Compact
Small, lightweight, and easy-to-install outdoor unit.
or more
To prevent increased operation sound, avoid installing the air suction grille directly below the suction chamber.
Quiet operation
Indoor unit High
(220V) dB(A)
Low
41 43 43
38 40 40
Cooling only
FDBG18NU26NU
Option
43/40dB(A)
High Low
Durable
To achieve increased durability by improved resistance to salt corrosion and atmospheric pollution, coated PE fins (with special acryl pretreatment) are used for the heat exchanger of the outdoor unit.
FDBG26NU
(220V)
Remote controller
Features
Feature
Comfort
Switchable fan speed
Others
KRC47-2A KRC47-4A
KRC47-1A
Auto-restart
OUTDOOR UNIT
R26NU
R30NU
R36NU
R42NU
R48/51NU
Quiet Operation
Fitted with wide inlet fan
(Applies to R26NU51NU)
Compact
Slim-design and low-profile compact outdoor units
(Applies to R26NU51NU)
Fully shaped aerodynamic propellers are designed to push air with a large wing Wide inlet fan surface. This provides both high blow volume and quiet operation with minimal turbulence.
Compactly designed outdoor unit with interior layout optimised for the smooth airflow. Curved Super Aero Grille restricts the spread of exhaust gas and fits in the same space as conventional outdoor units.
10 m 10 m 10 m 10 m 15 m 15 m 15 m 15 m 5m
(Equivalent length 50 m) (Equivalent length 50 m) (Equivalent length 50 m) (Equivalent length 50 m) (Equivalent length 50 m) (Equivalent length 50 m) (Equivalent length 50 m) (Equivalent length 50 m) (Equivalent length 70 m)
30 m 30 m 30 m
15 m 15 m 20m 20m 20 m 20 m 20 m 20 m 30 m
30 m 30 m 30 m
To suppress turbulence and achieve quiet operation, the curved ribs of the grille are optimised to meet the outflow of air.
50 500
(mm)
30 m 30 m 50 m
Note: 1Additional refrigerant charging is required if the refrigerant pipe is longer than the length.
Piping can be run from the front, bottom, right or rear surface according to how the unit is installed.
Durability
Heat exchange fins provided with anti-corrosion treatment
To achieve increased durability by improved resistance to salt corrosion and atmospheric pollution, coated PE fins (with special acryl pretreatment) are used for the heat exchanger of the outdoor unit.
Construction Non-treated fin PE fin
Aluminium Hydrophilic film Aluminium Corrosion resistant acrylic resin
Outdoor unit
R30NUV1 R30NUY1 R36NUV1 R36NUY1
Sound level
57 55 57 59 59
Comfort
Auto-swing
Delivers comfortable airconditioning to all areas, near to and far from the airconditioner.
Air discharge direction angle can be set (fixed setting)
If refrigerant piping length does not exceed 15 m, there is no need for on-site gas charging. (Applies to R36NU51NU)
Long-life filter
Maintenance is not required for one year (two years when a ceiling mounted cassette type is used).
(2) Air direction range in draft prevention position (3) Air direction range in ceiling soiling prevention position
Filter sign
The filter sign warns you when it is time to clean the filter.
*When using a wired remote controller the sign is displayed in the LCD. When using a wireless remote controller the filter sign lamp illuminates on the signal receiver unit.
Programme "Dry"
Dehumidification is microprocessor controlled to prevent abrupt and uncomfortable changes in air temperature. Useful for reducing uncomfortable humidity without uncomfortable cooling of the room.
Control features
Auto-restart
If there is a power outage while the equipment is operating, operations will restart in the same mode as before the power cut when electricity is restored.
High-ceiling application
Delivers air-conditioning comfort all the way down to the floor in air-conditioning zones with high ceilings.
Others
PE fin
To achieve increased durability by improved resistance to salt corrosion and atmospheric pollution, coated PE fins (with special acryl pretreatment) are used for the heat exchanger of the outdoor unit. In high corrosive areas, regular maintenance needs to be carried out.
Note:When units are installed on high ceilings, depending on the model, various restrictions concerning maximum height, air discharge direction, and choice of options may apply.
Options
High-efficiency filter unit
Two types are available: 65% and 90% colorimetry.
Timer selector
Operation starts when the preset time of the ON timer elapses and stops when the preset time of the OFF timer elapses.
Mould prevention
Mould resistant treatment for filter
Sanitary filter has mould resistant treatment.
Requires no maintenance for about 4 years* (10,000 h) in stores and offices. * For dust concentration of 0.15 mg/m3
10
Indoor unit
Outdoor unit
Unit Decoration panel m3/min Airflow rate (H) cfm Sound level (H/L) (220V) 2 dB(A) mm Dimensions Unit (HXWXD) mm Decoration panel kg Unit Machine weight kg Decoration panel CWB Operation range Colour Compressor Type Motor output kW Refrigerant charge (R-22) kg
Sound level 2, 3 Dimensions (HXWXD) Machine weight Operation range Liquid (Flare) Piping connections Gas (Flare) Drain Indoor unit Outdoor unit Max. interunit piping length Max. installation level difference Heat insulation
59 57 57 49 54 55 57 dB(A) mm 540X750X270 685X800X300 770X900X320 770X900X320 1,170X900X320 1,170X900X320 1,345X900X320 92 kg 42 61 70 (V1), 69 (Y1) 70 (V1), 69 (Y1) 81 (V1), 79 (Y1) 87 CDB 21 to 46 o 9.5 mm o 6.4 o 6.4 o 9.5 o 9.5 o 9.5 o 9.5 / / / / / / / o 19.1 mm o 15.9 o 15.9 o 15.9 o 15.9 o 19.1 o 19.1 / / / / / / / mm I.Do 25XO.Do 32 I.Do 25XO.Do 32 I.Do 25XO.Do 32 I.Do 25XO.Do 32 I.Do 25XO.Do 32 I.Do 25XO.Do 32 I.Do 25XO.Do 32 / / / / / / / / / / / / / / mm o 26.0 (Hole) o 18.0 (Hole) o 18.0 (Hole) o 26.0 (Hole) o 26.0 (Hole) o 26.0 (Hole) o 26.0 (Hole) / / / / / / / 30 (equivalent length 50 m) m 20 m 15 Both liquid and gas piping
Note : 1 Rated cooling capacities are based on the following conditions: 1a Indoor temp., 27CDB, 19.5CWB; outdoor temp. 35CDB. Equiv. refrigeration piping, 7.5 m (horizontal). 1b Indoor temp., 27CDB, 19.0CWB; outdoor temp. 35CDB. Equiv. refrigeration piping, 7.5 m (horizontal). 2 Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions. 3 In case of V1: 220V, Y1: 380V.
Indoor unit
Power consumption 1a/1b Colour Airflow rate (H) Sound level (H/L) (220V) 2 Dimensions (HXWXD) Machine weight Operation range Colour Compressor Type Motor output Refrigerant charge (R-22) Sound level Dimensions (HXWXD) Machine weight Operation range Piping Liquid (Flare) connections Gas (Flare) Drain Indoor unit Outdoor unit Max. interunit piping length Max. installation level difference Heat insulation
2, 3
Outdoor unit
kW kg dB(A) mm kg CDB mm mm mm mm m m
Note : 1 Rated cooling capacities are based on the following conditions: 1a Indoor temp., 27CDB, 19.5CWB; outdoor temp. 35CDB. Equiv. refrigeration piping, 7.5 m (horizontal). 1b Indoor temp., 27CDB, 19.0CWB; outdoor temp. 35CDB. Equiv. refrigeration piping, 7.5 m (horizontal). 2 Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions. 3 In case of V1: 220V, Y1: 380V.
11
Indoor unit
Sound level (H/L) (220V) 2 Dimensions (HXWXD) Machine weight Operation range Colour Outdoor Compressor Type unit Motor output Refrigerant charge (R-22) Sound level 2, 3 Dimensions (HXWXD) Machine weight Operation range Piping Liquid (Flare) connections Gas (Flare) Indoor unit Drain Outdoor unit Max. interunit piping length Max. installation level difference Heat insulation
kW kg dB(A) mm kg CDB mm mm mm mm m m
4.50 2.8 (Charged for 5 m) 56 1,345X880X370 114 o 9.5 / o 19.1 / o 26.0 (Hole) / 50 (equivalent length 70 m) 30
Note : 1 Rated cooling capacities are based on the following conditions: 1a Suction temp., 27CDB, 19.5CWB; outdoor temp. 35CDB. Equiv. refrigeration piping, 7.5 m (horizontal). 1b Suction temp., 27CDB, 19.0CWB; outdoor temp. 35CDB. Equiv. refrigeration piping, 7.5 m (horizontal). 2 Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions. 3 In case of V1: 220V, Y1: 380V.
Power consumption 1a/1b Colour Indoor Airflow rate (H) unit Fan Driving system Sound level (H/L) (220V) 2 Dimensions (HXWXD) Machine weight Operation range Colour Compressor Type Motor output Refrigerant charge (R-22) Sound level Dimensions (HXWXD) Machine weight Operation range Liquid (Flare) Piping connections Gas (Flare) Drain Indoor unit Outdoor unit Max. interunit piping length Max. installation level difference Heat insulation
2, 3
Outdoor unit
kW kg dB(A) mm kg CDB mm mm mm mm m m
Note : 1 Rated cooling capacities are based on the following conditions: 1a Suction temp., 27CDB, 19.5CWB; outdoor temp. 35CDB. Equiv. refrigeration piping, 7.5 m (horizontal). 1b Suction temp., 27CDB, 19.0CWB; outdoor temp. 35CDB. Equiv. refrigeration piping, 7.5 m (horizontal). 2 Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions. 3 In case of V1: 220V, Y1: 380V.
12
Indoor unit
CEILING MOUNTED CASSETTE TYPE
Type Item Decoration panel Sealing member for air discharge outlet Panel spacer Fresh air intake kit Chamber Without the T-joint pipe and fan type With the T-joint pipe,without fan Direct installation type High-efficiency filter (Colorimetric method 65%) (Colorimetric method 90%) Replacement (Colorimetric method 65%) high-efficiency filter (Colorimetric method 90%) High-efficiency filter chamber Replacement long-life filter Ultra long-life filter Replacement ultra long-life filter Branch duct chamber Remote controller Wired type2 Wireless type Central remote controller3 Unified ON/OFF controller3 Schedule timer3 Adaptor for wiring4 Wiring adaptor for electrical appendices3 Interface adaptor for SkyAir series Installation box for adaptor PCB
Note: 1 Required for installing high-efficiency filter or ultra long-life filter. 2 Wiring for wired remote controller to be procured locally. 3 This optional accessory requires DTA102A52. 4 Installation box for adaptor PCB (KRP1B98) is necessary.
FHC18NU
FHC21NU
FHC26NU
FHC30NU
FHC36NU
FHC42NU
FHC48NU
BYC125K-W1, BYC125K-W2 KDBHJ55K160 KDBP55H160WA KDDP55D160 KDDP55D160K KDDJ55X160 KAFP556D80 KAFP557D80 KAFP552H80 KAFP553H80 KDDFP55D160 KAFJ551K160 KAFP55D160 KAFJ55K160H KDJ55K80 BRC1C61 BRC7C613W DCS302CA61 DCS301BA61 DST301BA61 KRP1BA57 KRP4AA53 DTA102A52 KRP1B98 KDJ55K160 KAFP556D160 KAFP557D160 KAFP552H160 KAFP553H160
Type
FH21NU
FH26NU
FH30NU KAFJ501D112
FH36NU
FH42NU
FH48NU
KAFJ501D80 KHFJ5F80
KAFJ501D160 KHFJ5F160
BRC1NU61 BRC7NU66
DUCT CONNECTION
Item
Remote controller Digital remote controller Digital remote controller for duct heater use
DUCT CONNECTION
Item
Remote controller Digital remote controller Digital remote controller for duct heater use Suction grille Drain pan cover
Outdoor unit
Item Drain piping kit Central drain plug Type
R18NU R21NU R26NU R30NU R36NU R42NU R48NU R51NU R56NU
-------------
KIS95
------KKPJ5F180
13
DIMENSIONS
CEILING MOUNTED CASSETTE TYPE
(Unit: mm)
10
950
6 7
A view 750 Adjustable(0~550) 55 420 55
[FHC18NUV1-26NUV1] 55 840 80 2 100=200 85
3
295
840
40 A 30 10
200
8 5
A FHC18NUV1-26NUV1 FHC30NUV1-48NUV1
D ----
E ----
55
40 350 A
210
50
60
65
(Hanging position)
10
A (Hanging position)
15
105
For height installaion From the floor side 2500 or more 155 5 (Required space)
680
1 5 11
80
Position : Hole of wall for taking out in piping back (View from the front) 90 155 40
13
55
B The Front
4 o 45 /
55
14
Obstacle Floor side Drain pipe connection VP20 (For left piping) 300 275
6
225 275
80
Notes: 1 Location of unit's Name Plate: Bottom of fan housing inside the suction grille. 2 In case of using wireless remote controller, this position will be a signal receiver. Refer to the drawing of wireless remote controller in detail. 3 The remote control code is the standard <about 3 m outside the machine> attached. (0.5 mm2 2 wicks O.D. 5.4) (It is attached to VRV.)
80 105 170
1 Air discharge grille 2 Air suction grille 3 Air filter 4 Gas pipe connection 5 Liquid pipe connection 6 Drain pipe conneciton 7 Earth terminal (inside the electric components box) (M4) 8 Suspension bracket 9 Backward piping and wiring connection opening lid 10 Upward piping and wiring connection opening lid 11 Right side pipe connection 12 Left back drain pipe connection 13 Left side drain pipe connection 14 Right side drain pipe connection 15 Hole of wall for taking out in piping back 16 Upward drain pipe connection 17 Upward gas pipe connection 18 Upward liquid pipe connection
260
127
Position slit hole for taking out in piping back (View from the front)
65
1360 1400
1120 1160
40 135
115 60
1120 1160
150
195
12
145 60
14
DIMENSIONS
FDMG26NUV1
(Unit: mm)
151
300 or more
427
55
Service space
50
7XP150=1050
51
(All around)
(All around)
1 2 3 4 5 6 7 8
Liquid pipe connection Gas pipe connection Drain pipe connection Ground terminal Switch box Control wiring intake (for remote controller) Control wiring intake (for outdoor unit) Suspension bracket
3 600
680
427
116
146
381
126 H 151 J K L 51 4 M
55
Service space
D E
50
8 16 2
123
152
212
206
175
274
305
305
150
263 16
74
G (All Around)
827
29
7 N (All Around)
A B C E F D FDMG30NUV1/36NUV1/42NUV1/48NUV1 1550 1353 1403 1334 1314 7XP150=1050 FDMG51NUV1/56NUV1 1900 1703 1753 1684 1664 9XP150=1350
G
18-M4
Holes Holes
22-M4
H J K M L 1550 1353 1337 1321 7XP150=1050 1900 1703 1687 1671 9XP150=1350
N
20-M4
Holes Holes
24-M4
1 2 3 4 5 6 7 8
Liquid pipe connection Gas pipe connection Drain pipe connection Ground terminal Switch box Control wiring intake (for remote controller) Control wiring intake (for outdoor unit) Suspension bracket
15
10
280
74 16 10
18-M4 Holes
727
29
305
3
580
317
50
126
2
110 170 228
55
Service space
5
260 150 219 236 16 10 151 H I J K L M
H 127 102 I J K L M N
Holes Holes
N (All around)
1 2 3 4 Liquid pipe connection Gas pipe connection Drain pipe connection Ground terminal 5 6 7 8
29
7
O (All around)
Switch box Control wiring intake (for remote controller) Control wiring intake (for outdoor unit) Suspension bracket Note: 1Location of unit's Name Plate: Chamber cap
FDBG18NUV1 FDBG21NUV1/26NUV1
A B C F D E 900 704 755 684 664 3XP150=450 1300 1104 1155 1084 1064 6XP150=900
G 500 700
3XP150=450 674 688 704 900 6XP150=900 1074 1088 1104 1300
10-M4 12-M4
Holes Holes
16-M4 18-M4
52 16 10
O
16
DIMENSIONS
OUTDOOR UNIT R18NUV1
Holes for anchor bolts (M8 or M10) 3-Drain outlets 700 520
(Unit: mm)
190 170
60 27
237 213 48
95
530 750
100
34 72
290 306 15
270
Terminal cover Earth terminal (M4) Power intake Gas stop valve Liquid stop valve
540
Name plate
34
58
27
A 100 50
50 50
R21NUV1
Holes for anchor bolts (M8 or M10) 269
31
540 800
130
98
2-Drain outlet 15 Earth terminal (M4) Power intake 300 Outdoor air thermostat
330 350
H 685 645 Liquid stop valve Service port Gas stop valve 100 95 70 Gas pipe A Name plate Liquid pipe 75
50
50
H H 1000 H 1000
A 300 600
17
3 2 1 6 5 4
6 5 4
55
770
60
329 352
89 142 71
28
89
19 16 58 16
19
80 145
223 53 95 52 13 67
7
70 102 117
4
45 376 191
54 95 84 55
54 95 143
1 Gas pipe connection 2 Liquid pipe connection 3 Grounding terminal M5(in switch box) 4 Refrigerant piping intake 5 Power supply wiring intake 6 Control wiring intake
Note: In some circumstances, with certain machine types, it may not be possible to attach the supplied piping.
7 Drain connection
R36NUV1/Y1
4 2 1 3 7
1170
6 5 5
410 435 60
7 7 6
54 84 55 223 148 52 13 67 19 80 145
6 5
95
157.5
24
89
89 142
8
70 102 117
71
16
54
19
16
54
95
5
45 376 191
1 2 3 4 5 6 7 8
Gas pipe connection Liquid pipe connection Service port(in the unit) Grounding terminal Refrigerant piping intake Power supply wiring intake Control wiring intake Drain pipe connection
58
18
DIMENSIONS
OUTDOOR UNIT R42NUY1, R48NUY1, R51NUY1
Hole for anchor bolt 4-M12 350 (345~355)
(Unit: mm)
B 54 55
C 113
D 579
30
R48NUY1/51NUY1
140 30
620 900
96 140
30
41
48 61 320
4 2 1 3 7 6 5 5
410 435 60 55 95 95
7 6
B 223 84 19 80 145
7 6 5
95 53 52 13 67
24
89
54
C D
89 19 142 71 16 16
8
70 102 117
54
1 Gas pipe connection 2 Liquid pipe connection 3 Service port (in the unit) 4 Grounding terminal M5 (in switch box) 5 Refrigerant piping intake 6 Power supply wiring intake 7 Control wiring intake 8 Drain pipe connection
45
376
191
R56NUY1
84 38
396
146 30
584 880
150
1345
30
35
370
30
58
4 3 2 1 7 6 5 7 6
538 568
5
95 60
60
95
49
name plate
90 14 137 40 61 11 102 11
14 67 115
84
144 14
90
24
84
49
275
5
391
3 Service port(in the unit) 4 Grounding terminal M5(in switch box) 5 Refrigerant piping intake 6 Power supply wiring intake 7 Control wiring intake 8 Drain outlet
19
REMOTE CONTROLLER
BRC7C613W
Wireless type
Transmitting part
Receiver detail
157
62
17.5
BRC7NU66
Transmitting part
Remote controller holder installation procedure <Installation to wall surface>
The Front
Receiver
Receiver detail
115.5
54
18.1
2-5x9 Slot
Receiver detail
Service space for ceiling installation
(Ceiling opening)
More than 90 (Srevice space)
72 83.5 106
120
70
18 0.535
Switch box
(Ceiling opening)
49
Note : install more than 3 receivers in Do not the vicinity of one another. With 4 or more units, there is always the possibility of malfunction
BRC1C61
120
Wired type
KRC47-2A/ KRC47-4A
42 25 84 19 110 18 58
120
17
18 23 28 46
92 61
14
Conduit
0~5 17
117
CONTROL BOX
17
Through hole
(12~16)
KRC47-1A
136 124 81 32
Note) 1. Remote controller cord and staple are not attached. they are field supplied parts.
BRC1NU61
Specifications of cord Vinyl cord with sheath or cable Type (Insulated thickness: 1 mm or more) Size 0.75~1.25 mm2 Total length 500 m
20 25
B B
22 25 13
77
25 20
A A
111
24
41
38 41.5
17 R2
119
36
85
10
20
For R26NU-56NU
The values represent the case for the R26 type through R56 type. The dimensions in ( ) are for the R36 and R56 type (The unit values is mm. ) In case of R56 model, the values in < > are those when the air discharge direction of the grille is downward.
When there is an obstruction on the inlet side When the overhead space is open
1. For single unit installation When there is an obstruction only on the inlet side
re
When there is an obstruction on the outlet side When the overhead space is open
1. For single unit installation
500
or m
ore
100
0o
rm
ore
ore
100
1. For single unit installation 2. For series installation (more than two units) When there are obstructions on both sides
An obstruction in the overhead space
ore
ss
500
or m
500
or le
1000 or more
100 0o
or m
ore
0 10
or
mo
re
500
or le
ss
100
0o
rm
ore 200
or m
ore
20
0 0(3
0)
or
mo
re
rm
ore
When there are obstructions on both the inlet and outlet sides
Pattern 1
For other patterns, please refer to engineering databook.
When the obstruction on the outlet side is higher than the unit itself (There is no limit to the height of the obstruction on the outlet side.)
1000 or more
When there are obstructions on the inlet side and ss or le both lateral sides 500
An obstruction in the overhead space
150 or
100
or m
ore
mo
L
re 150 or mo re
150
or m
ore
2. For series installation (more than two units) When there are obstructions on the inlet side and both lateral sides
500 or le
1000 or more
ss
ore 200
or
mo
re
(3 00
00
)o
rm
ore
21
1000 or more
MEMO
22
Warning
Daikin Industries, Ltd.s products are manufactured for export to numerous countries throughout the world. Daikin Industries, Ltd. does not have control over which products are exported to and used in a particular country. Prior to purchase, please therefore confirm with your local authorised importer, distributor and/or retailer whether this product conforms to the applicable standards, and is suitable for use, in the region where the product will be used. This statement does not purport to exclude, restrict or modify the application of any local legislation. Ask a qualified installer or contractor to install this product. Do not try to install the product yourself. Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion. Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or contractor to install those parts and accessories. Use of unauthorised parts and accessories or improper installation of parts and accessories can result in water or refrigerant leakage, electrical shock, fire or explosion. Read the User's Manual carefully before using this product. The User's Manual provides important safety instructions and warnings. Be sure to follow these instructions and warnings. If you have any enquiries, please contact your local importer, distributor and/or retailer.
All of the Daikin Groups business facilities and subsidiaries in Japan are certified under the ISO 14001 international standard for environment management.
JMI-0107
JQA-1452
Dealer
Head Office: Umeda Center Bldg., 2-4-12, Nakazaki-Nishi, Kita-ku, Osaka, 530-8323 Japan Tokyo Office: JR Shinagawa East Bldg., 2-18-1, Konan, Minato-ku, Tokyo, 108-0075 Japan
http://www.daikin.com/global_ac/
c All rights reserved Printed in Japan 05/09 HP SS
Specifications, designs and other content appearing in this brochure are current as of May 2009 but subject to change without notice.