Академический Документы
Профессиональный Документы
Культура Документы
is therefore essential which is commonly done by filling or by using deburring machine tool. Filing of Burr is time consuming and it also does not give smooth edge; whereas burr removal using deburring machine tool is not always possible or economical. Deburring hand tools offer Fast, Efficient and Economical solution for burr removal.
Application Overview: We offer deburring tools for hand deburring of edges - Straight, Inner & Curve. Both Sides of Slots, key-ways, Ribs, Ridge, Sheets, Corners, Single or both Sides of Hole Etc.
DT-1
This is a Simple, Economical Tool. It has Universal blade C10 attached to a hexagonal handle with pocket clip. The blade cannot be replaced
DT-2
Packing Model DT-1 (2) DT-1 (10)Set Includes 2 Pcs of DT-1 10 Pcs of DT-1
In this the blade can be replaced. This includes Hexagonal handle with universal blade C-10.
Packing Model DT-2 DT-2 (5)Set Includes 1 Pcs of DT-2 5 Pcs of DT-2
Here the blades can be replaced & stored from back side of the handle. The handle body is ABS Plastic & the blade holder is of Polyacetal.
DT-3
Packing Model
Includes
'D Handle & 3 Blades C-10, C-20 & C-30 'D' Handle & 5 Blades C-10, C-20 & C-30, C-10(C) & C-15
DT-4
This ABS Plastic handle holds both 'C' & 'P' type Blades.
Packing Model
Includes 'DN' Handle & 4 Blades C-10, C20, P1 & P2 'DN' Handle & 10 Blades C-10, & 10 Blades of P1.
DT-4 DT-4 CP
DT-3
DT-35
DT-3 (M)-SD
This is a Polyacetal body handle & metallic DT-3(M)-SD blade holder for longer life. Ergonomically Designed Has Thumb Rest DT-35(M)-SD Grips Well In Hand Blades can be stored from the back side.
Packing Model
Includes
'D-SD Handle & 3 Blades C-10, C-20 & C-30 'D'-SD Handle & 5 Blades C-10, C-20 & C-30, C-10(C) & C-15
DT-5-SD
Here the Blades can be replaced & the holder can be telescoped to reach & deburr the burrs at depth Collect action ensures firm locking of plain surface holders
Packing Model
DT-5-SD
DT-52-SD
DT-SD (3 in 1)
This is a unique Deburring Tool with Handle which can hold three sizes of swivel blades viz. 'R' (6 mm ? ), 'C' (3.2 mm ?) & 'P' (2.6 mm ?) The handle has auto release system for easy change of Blades & Holders. All the holders and blades can be stored from back side of the handle. Includes Handle R-SD, Holders SD-C & SD-P and 7 Blades R-15 (S), C10, C-20, C-30, P-1, P-2, & P-3.
Scraper
For Surface Finishing / Scraping
Scraper SCR-8 - SD Triangular 8 mm A/F Scraper with swiss design handle. Replaceable type.
2 Flute Countersinks
For hole deburring & Chamferring. 3 sizes upto 30 mm for use by hand. 12 mm shank size for all tools.
Type
12 mm 20 mm 30 mm
Handles common for all three tools. Type CSH & CSD(r) for Rachet Mechanism
CS-H
CSH - R(S)
12 mm 20 mm 30 mm 40 mm
BLADES TYPE
APPLICATIONS
PACK QUANTITY
BLADES TYPE
APPLICATIONS
PACK QUANTITY
Universal Blade. For light duty & small components deburring of Steel, Aluminium, Copper, Zinc, Plastics, etc.10 For small components of C.I. & Brass For both sides of sheet metal holes upto 6 mm thickness. Universal Blade. For materials having spiral chips such as Steel, Aluminium, Copper, Zinc, Plastics, etc. For materials having brittle burr such as C.I. & Brass
C-15
For stainless steel & hard plastic. For small holes from 1.5 mm in Steel & Aluminium. Titanium Nitride (TiN) coating on P1, P2, C10 & C20 Blades for hard metal & longer life application.
10 10 10 10
Universal Blade for Extra Heavy duty deburring application. For materials having spiral Chips such 10 as Steel, Aluminium, Copper, Zinc, etc. For Stainless steel application
For simultaneous deburring of inner & outer edges of sheet metal holes up to 10 mm thickness.
10
KW-9
(Four cutting edges. 2 for std. depth of slot/keyway & 2 for shallow depth.)
KW-16 V-4
4 nos 'V' Shaped edges 2 nos for 1 to 12 mm width & 2 nos for 0 to 4 mm width range For Stainless steel application
S-12
Cutting edge along full circle and on 2 sides for long life.
SCR-8 Blade
DT(C)
Holds all C Blades.
DT(P)
Holds all P Blades.
VT KW
SD-C
Holder for C Blade
Holds all R Blades & SD-C & SD-P Holders
CS
Holds all Countersink Tools
DTK-1
DTK-2
DTK-5
Includes : Handle D, Five Blades C-10, C-20, C-30, C-10 (Coated) and C-15, Scraper SCR-3, Countersink tool CS-20 and CSH handle
Includes : Handle T-SD, Telescopic holder DT(C), Five Blades C-10, C-20, C-30, C-15 & C-10 (Coated), Countersink Tool CS-20 & CSH-R handle.
Includes : T-SD (2 No.) & DT handles, DT(P), VT & KW Holders, Scraper SCR-8, CSS Countersink Tool with Ratchet Handle, Deburring Blades-P-1 & P-2 (2each), C-10 (5 pcs) C-20, C-30, C-15 and C-10 (Coated) & C-101 (1each), Key-way / Slot Deburring Blades KW-9 & KW-16, Shet / Rib Deburring Blade V-4.