Академический Документы
Профессиональный Документы
Культура Документы
Width=200 mm, Height=100 mm Create a circle where the center has the coordinates 100,50,0 (the center of the rectangle) and the radius of the circle is 20 mm. There is a load of 20N/mm distributed on the right hand side of the plate. Answer the following 1.
2. 3. Is Finite Element Method is an approximate method? What are the capabilities of ANSYS Mechanical? The output window is independent of Ansys Menu say true or false.
Young's modulus EX: 200000 Poisson's Ratio PRXY: 0.3 assume dimensions Answer the following
1. What are the preliminary decisions to be taken in an analysis? 2. What is axisymmetry models? 3. Name the Postprocessors used in ANSYS.
(l-a)
500 N
(Cantilever Beam)
Conduct a harmonic forced response test by applying a cyclic load (harmonic) at the end of the beam. The frequency of the load will be varied from 1 - 100 Hz. The figure above depicts the beam with the application of the load Answer the following
1. How to save the model as Section.db in your folder? 2. Write about working directory in Ansys software? 3. Name the two help Windows?