Академический Документы
Профессиональный Документы
Культура Документы
-- Add the CE ADD CE -- Add CE Pipe Connection Ref ADD CREF -- Add CE with column 35 (See Colour Sheet) ADD CE COL 35 -- Add all disciplines that overlap CE ADD ALL WITHIN VOL CE -- Add all disciplines that overlap CE with a volume of 100mm all round ADD ALL WITHIN VOL CE 100 -- Add all Sections that overlap CE ADD ALL SCTN WITHIN VOL CE -- Add all Equipment that overlaps CE ADD ALL EQUIP WITHIN VOL CE -- Add Site ADD SITE
AID
Remove unwanted Aids from the 3D View:
AT
-- Move CE to a new cursor position AT @ -- Move CE to a selected P-Point AT IDP@ -- Move CE to a Selected P-Line AT IDPL@
AUTO
Zoom in on the Current Element:
AUTO CE
AXES
Set the Axes to appear at the CE:
AXES OFF
BY
The following commands move the CE 100mm Up, Down, North, East respectively:
BY BY BY BY
CHE (Check)
Perform a consistency check on the CE:
CHE CE
COL (Colour)
Change the CE colour to Violet:
DELETE (Delete)
DELETE CE
DIST (Distance)
To measure the distance between two points:
CONST DIST IDP@ TO IDP@ CONST DIST P0 TO P0 OF ID@ CONST DIST PA TO PA OF NEX
ALL EQUI COLOUR 13 ALL REDU WITH (ABOR GT 10) COLOUR 5 /PIPE2 COLOUR 10 20 OF LEAVE TUBE COLOUR 7
FINISH
Saves PDMS session and exits the application.
FINISH
FLIP
Flip the CE:
FLIP CE
GETWORK
Open the latest model:
GETWORK
LOCK
Lock the CE and CE Members:
LOCK ALL
MARK / UNMARK
This will add a tag to the element on the 3D View.
MARK CE MAR CE MARK /ELEMENT01 MARK WITH 'Hello World' MARK WITH 'Hello World' MARK WITH 'Hello World' MARK WITH NAME ALL BRAN MARK WITH NAME OF SPREF UNMARK CE UNMARK ID @ UNMARK ALL
NAME
Renames the CE:
NAME /NEWNAME
PREC (Precision)
By default precision is set to 0 decimal places. To alter the precision (to 2 decimal places) enter:
PREC 2 DP
REFRESH
REFRESH
REMOVE
Remove the CE:
REM CE
RENAME
Rename:
SAVEWORK
Save the current model:
SAVEWORK
UNCLAIM
Unlock all Claimed members:
UNCLAIM ALL
UNLOCK
Unlock the CE & CE members:
UNLOCK ALL
UNMARK NAME
UNM CE
Command _______ Q ANGLE Q ADEG Q ATEX Q BORE Q BSRF Q BTEX Q CE Q CHEI Q EVAR <evar> Q LOGIN Q MDB Q MEM Q NAME Q REF Q USER Q TEAM Q TYPE Q ATT Q LIST Q PARA Q ORI Q OWN Q POS Q POS WRT /* Q N/S/E/W/U/D Q POSS POSE Q CUTLEN Q DERLEN Q PSIZE Q BANG Q GTYPE Q SPRE Q HEI Q MATREF Q MIDPOI Q JUS Q MEML Q DRNS/E Q LEVEL Q BAN Q USER Q LASTMOD Q USERMOD Q DBNAME Q PA/L DO
Explanation ___________ Angle of the CE C/View Angle (i.e. 90 deg) Slab/Glab Text Attributes Pipe Inside Data ATTACHEDDRG/SHT (Drawing Level) Dead Text Attributes Current element Text Character Height Query Environment Variable. Current Login Name Current MDB CE Members CE Name CE Reference Name Current User Valid Teams for the Current User CE Type CE Attributes CE Available Element Types CE Parameters CE Orientation CE Owner Position with respect to Owner Position with respect to World Position N/S/E/W/U/D Position Start/End Cut Length Derived Length Pane Box Size Beta Angle Geometry Type Specification Reference Plate Height Material Reference Midpoint Justification Line Member Line Direction Start/End Obstruction Level Current Version Current User Last Modified User Modified Database Name Outer Diameter of the Arrive/Leave of Pipe