Академический Документы
Профессиональный Документы
Культура Документы
Instruments
Speed limiter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Cable harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Switch panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Turbo boost gauge. . . . . . . . . . . . . . . . . . . . . . . . . . 6 Volvo immobilizer . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Dynafleet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Dynafleet without Driver tool . . . . . . . . . . . . . . . . .11 (DF-BAS/TIS-BAS) . . . . . . . . . . . . . . . . . . . . . . . .11 Dynafleet with Driver tool . . . . . . . . . . . . . . . . . . . .13 (DF-MED/TIS-MED). . . . . . . . . . . . . . . . . . . . . . . .13 Dynafleet with Secondary Display. . . . . . . . . . . . .16 (DF-HIGH/TIS-HIGH) . . . . . . . . . . . . . . . . . . . . . .16 Dynafleet Services . . . . . . . . . . . . . . . . . . . . . . . . .20 Migration from earlier services . . . . . . . . . . . . . . .22 Trip Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Instruments
Instruments
Speed limiter
Patented variable link system Robust electronic control unit Durable control device E-marked, that is, Europe-approved
Suitable for FL6/7/10, FS7, F10/12/16, N10/12, NL10/12 FL6/7/10, FS7, F10/12/16, N10/12, NL10/12 FL6 Excl. TD63 gen. 1 FL6 TD63 gen. 3 FL7 Excl. TD73, FL10, F10/12, N10/12, NL10/12 FL7 TD73
Cable harness
Damp-protected, reliable function Incorrect connection impossible no risk for fire Adaptors available for older vehicles Shorter time for installation
Wiring harness extra, for current supply that requires less than 1 Amp +15 feed Wiring harness extra, for current supply that requires more than 1 Amp B + feed Heavy-current cable, kit to be used when an accessory for 24 Volt power supply with more than 10 ampere (max 25 Amp/500 Watt) current consumption. The cigarette lighter is often used for connecting electrical accessories of different kinds. Some accessories, for instance a coffe maker have too high current consumption and can therefor damage the cigarrette lighter. To avoid this, a new heavy-current cable is introduced. Supplied with installation instructions.
*)
Suitable for FL7/10/12 FL FL7/10/12 FH/FM W0202 FH/FM W0202 FL7/10/12 FH/FM W0202 FH/FM W0202 FH/FM W0202
FH/FM W0202
3172933
A switch and lens are required. Switch 8157751 with 1 port, or switch 20569986 with three separate ports. Lenses with various symbols, depending on the area of use, are available for the switches
**) Switch, lens and relay 3171420 are required. Switch 8157751 with one port, or switch 20569986 with three separate ports. Lenses with various symbols, depending on the area of use, are available for the switches.
Switch panel
Helps the driver make full use of engine efficiency in the best possible manner Can help to avoid serious breakdowns by giving early warning of leakage in the induction system; a faulty exhaust system; sooty, oily or worn turbo; faulty fuel system The turbo boost gauge is supplied complete with cable harness and fitting instructions
Turbo boost gauge Basic kit Supplementary kit 6792537 1082093 1621200 1082093 1621201 1082093
1624541 1082093 1621201
Volvo immobilizer
A safe combination Truck theft is becoming increasingly commonplace no matter where you park your truck, theft from and of your truck is a spiralling risk. To protect your load and your truck, Volvo has developed the Volvo Immobilizer a security system whereby only the correct key will start the engine. The Volvo Immobilizer operates as a starter inhibitor since the starter key communicates with the engines starting circuit via security-coded electronic signals and randomly selected codes. Without the right key, the engine simply will not fire up. So as long as you keep your key safely, your truck is in perfect safety. The Volvo Immobilizer is available as an option on all trucks equipped with Volvos new electronic system. Full protection with the Volvo Truck Alarm Volvos effective truck alarm monitors the doors, front hatch and battery box as well as the cab tilting system, and it can be extended to protect the load too. It is activated by a radio-operated remote control and features integrated protection against grabbing or scanning of the transmission code. If you combine Volvo Truck Alarm, you are in an excellent position to negotiate insurance premiums with your insurance company and at the same time you can rest assured that your truck and its load always enjoy the maximum possible protection. This is how the Volvo Immobilizer functions There is a transponder embedded in the truck key, which communicates with an inductive antenna in the starter lock. When the key is inserted into the starter lock, the immobilizer control unit or ICU recognises the keys signal or electronic fingerprint and permits communication with the engines electronic management system (EMS). When the key is turned in the starter lock, a coded signal is sent from the engines electronic management system to the immobilizer control unit. If this signal is recognised and approved, a coded, randomly selected signal is sent on to the EMS to permit the engine to start. The entire process takes just a fraction of a second the only way youll be aware of its operation is when a lamp comes on in the instrument panel to indicate that the truck is ready to start. Installation at dealer Order immobilizer kit from Ghent. Obtain chassis number from customer, and order key kit (three keys) from Gent. Mechanically coded in accordance with chassis number. Agree time for installation. Program the software in the immobilizer, the engine control unit and the instrument with VCADS Pro programming tool. See service information, group 03. Initiate key programming with VCADS Pro. All three keys must be programmed. Check function of all keys, (start engine). See service information, group 03.
Key handling on the after-market When a replacement key is needed, order a key from Ghent. Specify chassis number, to obtain correctly mechanically coded key. Request the customer to bring all other keys, preferably at the time when the replacement key is supplied. Program all keys with VCADS Pro. (This makes the lost key unusable.) Check the function of all keys (start the engine).
Part No.
20393828
Suitable for
Part No.
20393828
Version 2 Electronics 98
3095744*) 3092441**
Programmable keys are not included in the hardware kit, they have to be ordered separately. Note that we recommend that you order 3 of them
Keys 3092167
VDA is now updated automatically by means of the VCADS Pro tool. This is done when you specify the part number of the kit and download the software in VCADS Pro.
*)
Program MID 128, 163 & 171 NB! The programming of control units will not be invoiced if performed after installing the software.
**)
Dynafleet
Dynafleet helps haulage companies to take full control over their transport operations and vehicle fleet. Dynafleet is Volvos online business tool for improved profitability. Using any computer connected to the Internet, you can check the current location of your trucks, monitor how much fuel they are consuming and check their driven routes, driver times and much more. Dynafleet is offered as four main services:
The customer can choose one or many services in any combination. The content of each service is described below.
Driver Times
Working & driver time reports Tachograph Download Driver time alerts
Positioning
Vehicle position Tracking history Geofencing Customer Online Tracking Tracking report
Messaging
Messaging between trucks and office
After deciding which Dynafleet service that suits the needs, you order Dynafleet by first selecting the Dynafleet hardware and then continue by selecting the suitable services. There are 3 choices for the Dynafleet hardware. These are:
Dynafleet without Driver tool Dynafleet with Driver tool Dynafleet with Secondary Display
In the table below you can see the parts that are included in the different hardware options.
10
Dynafleet without Driver tool (DF-BAS/TIS-BAS) Dynafleet with Driver tool (DF-MED/TIS-MED) Dynafleet with Secondary Display (DF-HIGH/TISHIGH)
Dynafleet gateway with a built in modem, mounted from factory behind the dashboard. Not visible to the driver. Antenna GPS/GSM antenna mounted on the cab roof. Assistance button located in position 13 or 14 in the dashboard.
Dynafleet gateway with a built in modem, mounted from factory behind the dashboard. Not visible to the driver. Antenna GPS/GSM antenna mounted on the cab roof. Assistance button located in position 13 or 14 in the dashboard. Driver tool displays messages, vehicle information and gives driver time warnings. Keyboard makes it possible for the driver to write messages.
Dynafleet gateway with a built in modem, mounted from factory behind the dashboard. Not visible to the driver. Antenna GPS/GSM antenna mounted on the cab roof. Assistance button located in position 13 or 14 in the dashboard. Driver tool displays messages, vehicle information and gives driver time warnings. Keyboard makes it possible for the driver to write messages. Pop-up display secondary colour display.
Note: If the customer wants the Messaging service, the Dynafleet with Driver tool or Dynafleet with Secondary Display hardware must be selected.
Registration and activation To register as a customer to Dynafleet Online, please visit: http://www.volvotrucks.com/onlineservices Existing Dynafleet Online customers, please go to: http://www.dynafleetonline.com Here you activate the Dynafleet Online subscription. More information More information about Dynafleet is available at: http://www.volvotrucks.com Select your location and then select Services -> Transport Information Systems Dynafleet. Here you can also take a virtual tour through Dynafleet Online. Support Dynafleet support can be obtained through the Dynafleet team at VPCS (Volvo Parts Customer Solutions), mail to: vas.dynafleet.support@volvo.com.
11
In the vehicle: Dynafleet gateway, Antenna and Assistance button The Dynafleet hardware was in the former set up. Perform, Perform & Locate and Operate, linked to the selected service. In this new set up the hardware and services are selected separately. The hardware option Dynafleet without Driver tool enables you to subscribe to the following services
The hardware items that are included in Dynafleet without Driver tool are: Dynafleet Gateway kit including Antenna GPRS-SIM card Cable harnesses Assistance button
Order information: Dynafleet without Driver tool GDS-package price users: Place your order by using the GDS-package price number below. GDSpackages contain VST-times. Otherwise, place your order by using the indicated Parts numbers for the respective truck model.
Chassis Number A 629563 < B 444668 < A 544695 - A 629562 B 311773 - B 444667
LHD
39703VO001 39703VO003
RHD
39703VO002 39703VO004
12
1) The kit includes a Volvo FMS gateway. If the vehicle is already equipped with an FMS gateway you can use 20926325.
Dynafleet Gateway kit Volvo SIM-card Cable Harness DF-GW FMS-Wiring Harness Driver Manual Assistance Button Accessory kit
2)
Installation of Dynafleet equipment in non-Volvo truck vehicles requires that an artificial chassis ID is created prior to running the accessory kits for the hardware and services as well as the ECU/MID programming. See explanation below.
1. In Volvo Techtool/VCADS. Identify the vehicle manually as a COMP04 model. 2. Start the operation called "1700-08-03-35 Central systems, updating, create Dynafleet chassis ID" located under "1-Service and maintenance". 3. The operation will ask you for information. Fill in the non-Volvo vehicles real VIN number and select which Tachograph type it has (No Tacho, Analogue tacho or Digital tacho). Also select in which country the vehicle is operating/registered. 4. After the operation has been successfully performed the new artificial chassis ID will be created in VDA and presented to the Volvo TechTool user. This chassis number can now be used to continue the installation and run the Dynafleet accessory kits on and for programming of the ECU/MIDs. 5. After the installation is complete the vehicle can be entered in the Dynafleet Online portal by supplying the vehicles real VIN number during registration.
More information can be found in the installation instructions for Dynafleet in non-Volvo vehicles. Removing Dynafleet hardware If the Dynafleet hardware is removed from the vehicle the Accessory kit 85115938 must be run to update the VDA system.
13
In the vehicle: Dynafleet gateway, Antenna and Assistance button, Driver tool and Keyboard. The Dynafleet hardware was in the former set up. Perform, Perform & Locate and Operate, linked to the selected service. In this new set up the hardware and services are selected separately. The hardware option Dynafleet with Driver tool enables you to subscribe to the following services
The hardware items that are included in Dynafleet with Driver tool are Dynafleet Gateway kit including Antenna GPRS-SIM card Cable harnesses Assistance button Driver tool Keyboard
Order information: Dynafleet with Driver tool GDS-package price users: Place your order by using the GDS-package price number below. GDSpackages contain VST-times. Otherwise, place your order by using the indicated Parts numbers for the respective truck model. Please note that keyboard and manual must be ordered separately in the desired language, see information below.
14
Chassis Number A 629563 < B 444668 < A 544695 - A 629562 B 311773 - B 444667
LHD
39704VO001 39704VO003
RHD
39704VO002 39704VO004
Dynafleet Gateway kit Volvo SIM-card Cable Harness DF-GW FMS-Wiring Harness Dynafleet Driver tool USB-cable Driver Manual Assistance Button Accessory kit
1) The kit includes a Volvo FMS gateway. If the vehicle is already equipped with an FMS gateway you can use 20926325.
Dynafleet Gateway kit Volvo SIM-card Cable Harness DF-GW FMS-Wiring Harness Dynafleet Driver tool USB-cable Driver Manual Assistance Button Accessory kit
2) Installation of Dynafleet equipment in non-Volvo truck vehicles requires that an artificial chassis ID is created prior to running the accessory kits for the hardware and services as well as the ECU/MID programming. See explanation below.
6. In Volvo Techtool/VCADS. Identify the vehicle manually as a COMP04 model. 7. Start the operation called "1700-08-03-35 Central systems, updating, create Dynafleet chassis ID" located under "1-Service and maintenance". 8. The operation will ask you for information. Fill in the non-Volvo vehicles real VIN number and select which Tachograph type it has (No Tacho, Analogue tacho or Digital tacho). Also select in which country the vehicle is operating/registered. 9. After the operation has been successfully performed the new artificial chassis ID will be created in VDA and presented to the Volvo TechTool user. This chassis number can now be used to continue the installation and run the Dynafleet accessory kits on and for programming of the ECU/MIDs.
10.After the installation is complete the vehicle can be entered in the Dynafleet Online portal by supplying the vehicles real VIN number during registration.
More information can be found in the installation instructions for Dynafleet in non-Volvo vehicles.
15
On the Dynafleet Online portal manuals can be downloaded in the languages above and also in Czech, French, Hungarian, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Serbian, Slovak, Slovenian, Spanish and Turkish.
16
In the vehicle: Dynafleet gateway, Antenna and Assistance button, Driver tool, Keyboard and Secondary display. The Dynafleet hardware was in the former set up. Perform, Perform & Locate and Operate, linked to the selected service. In this new set up the hardware and services are selected separately. The hardware option Dynafleet with Secondary Display enables you to subscribe to the following services
The hardware items that are included in Dynafleet with Secondary Display are Dynafleet Gateway kit including Antenna GPRS-SIM card Cable harnesses Assistance button Driver tool Keyboard Secondary display
Order information: Dynafleet with Secondary Display Please note that keyboard and manual must be ordered separately in the desired language, see information below.
17
Dynafleet Gateway kit Volvo Sim-card Cable Harness DF-Gateway FMS-Wiring Harness Dynafleet Driver tool USB-cable Driver Manual Assistance Button Dynafleet pop-up dosplay Screen fitting kit Four-way switch SID-cable harness Accessory kit
RHD
1)
RHD
1)
21022797 20775443 21498502 21498501 21034575 21029933 21011012 20702339 20960435 20375500 20885675 85129232
21022797 20775443 21498503 21498501 21034575 21029933 21011012 20702339 20960433 20375500 20885675 85129232
21022797 20775443 21498502 21498501 21034575 21029933 21011012 20702339 n/a 20375500 20885675 85129232
21022797 1) 20775443 21498503 21498501 21034575 21029933 21011012 20702339 n/a 20375500 20885675 85129232
This hardware option is not available for Non Volvo vehicles. The kit includes a Volvo FMS gateway. If the vehicle is already equipped with an FMS gateway you can use 20926325.
18
On the Dynafleet Online portal manuals can be downloaded in the languages above and also in Czech, French, Hungarian, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Serbian, Slovak, Slovenian, Spanish and Turkish.
Dynafleet with Driver tool and connection to Secondary display (BUPMON, DF/TISHIGH)
FM/FH 0637-0748 (A629563-A659171) (B444668-B498029)
LHD 20926325 20775443 21023928 n/a 21034575 20885519 21011012 20375500 20885529 85129166 RHD 20926325 20775443 21023937 n/a 21034575 20885519 21011012 20375500 21042256 85129166
Dynafleet Gateway kit Volvo Sim-card Cable Harness DF-Gateway FMS-Wiring Harness Dynafleet Driver tool USB-cable Driver Manual Assistance Button Four-way switch SID-cable harness (BUPMON) Accessory kit
19
FM/FH 0549-0636 (A615020-A629562) (B421649-444667)
LHD Dynafleet Gateway kit Volvo Sim-card Cable Harness DF-Gateway FMS-Wiring Harness Dynafleet Driver tool USB-cable Driver Manual Assistance Button Four-way switch SID-cable harness (BUPMON) Accessory kit 21022797 20775443 21498502 21498501 21034575 21029933 21011012 20375500 20885529 85129232
1)
RHD 21022797 20775443 21498503 21498501 21034575 21029933 21011012 20375500 21042256 85129232
RHD
1)
21022797 20775443 21498502 21498501 21034575 21029933 21011012 20375500 20885529 85129232
21022797 1) 20775443 21498503 21498501 21034575 21029933 21011012 20375500 21042256 85129232
On the Dynafleet Online portal manuals can be downloaded in the languages above and also in Czech, French, Hungarian, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Serbian, Slovak, Slovenian, Spanish and Turkish.
20
Dynafleet Services
Dynafleet is offered as four main services:
Fuel & Environment Driver Times Positioning Messaging The customer can choose one or many services in any combination.
Driver Times
Working & driver time reports Tachograph Download Driver time alerts
Positioning
Vehicle position Tracking history Geofencing Customer Online Tracking Tracking report
Messaging
Messaging between trucks and office
The subscriptions to the Dynafleet services include unlimited communication between vehicle and office within the whole of Europe. As a customer you will also receive free updates regularly of the functions included. For the services Fuel & Environment, Driver Times and Positioning the minimum hardware requirement is Dynafleet without Driver tool. The Messaging service requires Dynafleet with Driver tool. To subscribe to the services you need to:
Run Accessory kit on the vehicle according to below Register as a customer to Dynafleet Online (unless the customer is already registered), please visit: http://www.volvotrucks.com/onlineservices When a login to Dynafleet Online has been obtained the vehicle can be activated on Dynafleet Online, http://www.dynafleetonline.com, and the subscription will start.
The subscriptions will be invoiced monthly according to the Dynafleet Online price list. http://www.dynafleetonline.com/static/pricelist_dynafleetonline.html Customer operational needs change over time. The Dynafleet services can be added or removed to meet new requirements. Order information: Dynafleet Services The below Accessory kits can be run without having the vehicle in the workshop. For services that the customer would like to subscribe to order the Accessory kits in the ON column. For the services that should not be activated order Accessory kits from the OFF column. The All services Accessory kit can be ordered when the customer would like to subscribe to all four services. The Accessory kits in the ON column can also be used to add services at a later stage and the Accessory kits in the OFF column can be used to turn off activated services. Running the Accessory kits is the first step in the activation / deactivation process. To finalise a service activation or deactivation log on to Dynafleet Online and follow instructions below.
21
VCADS-software (Accessory kit) Fuel & Environment Driver Times Positioning Messaging All services Suitable for ON 85129167 85129169 85129171 85129173 85129175 OFF 85129168 85129170 85129172 85129174 85129582
All vehicles
22
Migration options
Migrate from:
Perform, Perform & Locate
Operate
Migrate to one or several new services: Fuel & Environment Driver Times Positioning Fuel & Environment Driver Times Positioning Messaging
Subscriptions that are paid in advance Vehicles with prepaid subscriptions should not be migrated until the prepaid period has expired. Removing existing service and activating new services By ordering and running the Accessory kits for the new services the existing services (Perform, Perform & Locate or Operate) will automatically be removed. For services that the customer would like to subscribe to order the Accessory kits in the ON column. For the services that should not be activated order Accessory kits from the OFF column. The All services Accessory kit can be ordered when the customer would like to subscribe to all four services. To finalise the migration log on to Dynafleet Online and follow instructions below.
VCADS-software (Accessory kit) Fuel & Environment Driver Times Positioning Messaging All services
Suitable for
ON
85129167 85129169 85129171 85129173 85129175
OFF
85129168 85129170 85129172 85129174 85129582
All vehicles
Trip Manager
Trip Manager is a computer program that processes the stored information from the engines ECU in Volvo FL, FE, FM and FH vehicles. Information from the engines ECU is downloaded to a PC/laptop by connecting an USB-cable to the vehicles diagnostic socket. The information varies depending on which version of the software that is installed in the engines ECU. With Trip Manager you can produce different reports based on the information that you have downloaded from the vehicle:
23
Trip Manager is a member of the Dynafleet product family but with only very basic features and functions. It does not give you access to the Dynafleet Online services. Trip Manager does not require any Dynafleet hardware to be installed in the vehicle.
Description Trip Manager Interface box for 1587 signals USB-cable to Interface box 20 metre extension cable for Interface box