Академический Документы
Профессиональный Документы
Культура Документы
This is all (4) of the brake components removed This is the two slot gear mounted to the
form the gearmotor motor armature. It is attached by an
assembly that allows it to act as a clutch. It
will allow the gear to slip to relive any stress
that would be cause by a sudden stop
Ball Bearing
Gear box
Shaded poles
With the brake components The motor armature with the The short locking arm and
removed, we can see the lower two slot gear has been added spring has been installed. Notice
ball bearing and the two shaded that the spring pulls the arm
poles towards the center and into a slot
Gap No Gap
Gap
The brake armature has The brake armature has been The upper bearing assembly is
been added. Observe the added. Observe the armature now installed and the brake is
armature resting against the resting against the motor frame completely assembled on the
locking arm and the gap of and the lack of a gap of the motor.
the armature to the motor armature to the motor frame The gearmotor is ready to
frame when the motor is when the motor is energized install in the stove
de-energized
15 of 30
SPG Co. Ltd.: Although you will never have a need to disassemble the brake mechanism, it is easier to see how it
works if we break it down into the individual components.
This is all (3) of the brake components removed This is the two slot gear mounted to the
form the gearmotor motor armature. It is attached by an
assembly that allows it to act as a clutch. It
will allow the gear to slip to relive any stress
that would be cause by a sudden stop
Shaded poles
Ball Bearing
Gear box
With the brake components The motor armature with the The short locking arm and
removed, we can see the lower two slot gear has been added spring has been installed. Notice
ball bearing and the two shaded that the spring forces the arm
poles towards the center and into a slot
No Gap
Gap
Gap
The brake armature has The brake armature has been The upper bearing assembly is
been added. Observe the added. Observe the armature now installed and the brake is
armature resting against the resting against the motor frame completely assembled on the
two slot gear and the gap and the lack of a gap of the motor.
of the armature to the motor armature to the motor frame The gearmotor is ready to
frame when the motor is when the motor is energized install in the stove
de-energized
16 of 30