Академический Документы
Профессиональный Документы
Культура Документы
Training 2011
Step 1 Create a new folder and name it Static PSI, and then make it the current folder.
Copy SACINP.DAT and SEAINP.DAT files from Static directory to current folder.
Step 2 Create PSI input data file
Click-on Data file icon to launch Datagen program, and select Create new data file and
click-on OK to get the second window pop-up, as shown below; select Pile Soil Interaction as
the analysis type and make sure the unit is Metric KN. Click-on Select and skip the Title and
get next step to define the analysis options..
Training 2011
Click-on Next and select Include all piles in plot, select all load cases to be plotted. Do not
define plot size and specify pile section data until get Pile Group definition.
Step 5 Define pile group
Define two pile groups and one conductor group, the pile group ID =PL1 and PL2;
conductor group ID =CND. The first pile group segment length is 10m and second segment
has length of 30m with available end bearing area of 0.656m^2.
Training 2011
Click-on More to add the segments or groups, and click-on Next to finish the pile group
definition.
Clickheretoaddmoregroups
Clickheretogettonext
Training 2011
Training 2011
This step defines the soil stratum information followed by soil data of each stratum (Step 10), the
data needs to be defined is number of point of the curve, stratum location and T factors;
following picture shows the stratum definition of the top soil.
Step 10
Step 11
The picture below will show up when finish the step 10. Click-on Yes to enter the Q-Z axial
header data.
Training 2011
Define the Q-T axial header data shown in below picture, click-on Next to accept the data and
get to soil stratum data.
Define the soil stratum data as shown in following two pictures and repeat it for all the stratums.
Step 12
Torsional data
The torsional stiffness of the soil can be defined as linear spring, following two pictures gives the
detail of the input.
Step 13
Training 2011
The P-Y data input is similar to Axial T-Z data, follow the direction of Step 7 to 10 and get the
data from the soil report to finish the input.
Following two pictures show the soil type selection and P-Y header definition.
Following two pictures show the stratum and soil data definition at 0.0m location, repeat the
input to define all the P-Y soils at rest locations.
Your current directory should have three input files: SEAINP.DAT containing the loading
condition, SACINP.DAT containing the model information includes the weight definition and
PSIINP.DAT containing the pile model information.
Step 1 Select analysis type and options
File ID: dat
Analysis type: Static
Training 2011
Analysis subtype:
Analysis options:
Training 2011
Training 2011
Section 3
Member code check results can be checked from post listing file or Postvue database, see below.
--------------------------------------------------------------------------------------------------------------PSI SAMPLE ANALYSIS
DATE 12-FEB-2011
SACS-IV
TIME 16:10:54
PST PAGE
158
GROUP III - UNITY CHECKS GREATER THAN 1.00 AND LESS THAN*****
MAXIMUM
MEMBER
LOAD
DIST
AXIAL
FROM
STRESS
END
N/MM2
ID
BENDING STRESS
Y
N/MM2
UNITY CK
NO.
N/MM2
102P-202P PL1
1.438
STM1
0.0
-77.40 -114.13
103P-203P PL1
1.396
STM3
0.0
-84.84 -134.10
13.98
104P-204P PL1
1.636
STM2
0.0
-97.92 -140.61
803L-8104 W01
1.065
OPR3
0.0
804L-83FD W01
1.215
OPR3
0.0
8102-8103 W01
1.083
OPR3
5.0
-4.86
8103-802L W01
1.633
OPR1
8104-8105 W01
1.327
8105-804L W01
802L-804L W02
SHEAR FORCE
FY
KN
111.13 -144.24
FZ
KLY/RY
KLZ/RZ
KN
SECOND-HIGHEST
THIRD-HIGHEST
UNITY
LOAD
UNITY
LOAD
CHECK
COND
CHECK
COND
165.19
81.9
81.9
0.694
STM2
0.632
STM3
-18.21
187.41
81.5
81.5
0.751
STM2
0.733
STM1
-12.02
15.35
199.60
81.9
81.9
1.454
STM1
1.179
STM3
-5.42 -137.51
15.34
-5.14
230.24
18.9
64.6
1.002
OPR2
0.948
OPR1
0.01 -173.57
8.95
-3.79
241.85
18.9
64.6
1.189
OPR2
1.150
OPR1
146.66
-7.75
-0.03
160.83
18.9
64.6
1.078
OPR2
1.077
OPR1
5.0
-5.18 -221.15
-14.97
-5.99 -503.52
18.9
64.6
1.557
OPR2
1.489
OPR3
OPR3
5.0
-5.42
182.97
-7.23
204.19
18.9
64.6
1.302
OPR2
1.280
OPR1
1.902
OPR1
5.0
-5.29 -265.76
-8.28
-3.11 -609.48
18.9
64.6
1.863
OPR2
1.821
OPR3
1.758
OPR3
10.0
-2.24 -178.44
-6.55
-1.14 -606.56
38.5
132.5
1.724
OPR2
1.613
OPR1
0.08
---------------------------------------------------------------------------------------------------------------
Training 2011
DATE 12-FEB-2011
465
CASE
P I L E
M A X I M U M
LATERAL
KN
KN
MOMENT
KN-M
U N I T Y
C H E C K
S U M M A R Y
* PILEHEAD DISPLACEMENTS *
* * *
AXIAL
LATERAL
ROTATION
DEPTH
CM
CM
RAD
AXIAL
FBY
----------------
FBZ
SHEAR
COMB.
UNITY
N/MM2
-------------
CHECK
4.22
1.11
7.13
20.44
18.66
18.91
-43.54
-35.66
-61.23
254.99
256.36
218.21
0.268
0.219
0.365
1.071
1.110
0.917
-2045.22
-1233.30
-2139.58
3125.92
5852.36
2729.80
173.63
196.10
289.73
886.34
841.32
811.41
386.2
430.6
730.6
4514.2
3848.9
3849.2
0.16
0.10
0.16
-0.23
-0.43
-0.20
1.90
2.18
3.44
30.98
24.92
23.74
0.001688
0.001947
0.002927
0.014261
0.012223
0.011847
0.0
10.4
0.0
0.0
0.0
0.0
-25.00
-9.24
-26.15
38.20
71.52
33.36
18.47
-26.42
35.07
216.77
184.68
184.85
-1.67
-0.09
1.07
2.46
7.58
0.85
-4660.75
-2774.74
-703.99
-9529.89
-3152.27
3864.15
156.22
183.64
263.77
792.77
775.31
793.62
375.3
411.1
615.9
4871.0
3967.1
3584.8
0.35
0.21
0.06
0.71
0.24
-0.28
1.70
2.04
3.11
30.61
24.19
21.89
0.001471
0.001816
0.002723
0.015049
0.012492
0.011275
0.0 -56.96
0.0 -33.91
10.4
-5.38
0.0 -116.47
0.0 -38.53
0.0
47.23
17.99
19.71
-37.39
233.62
190.50
172.13
-1.04
-1.03
-0.04
-11.84
-2.44
2.72
3.89 -74.98
4.51 -53.65
1.52 -42.77
22.86 -350.39
19.83 -229.04
18.20 219.38
0.480
0.334
0.257
1.536
0.966
0.936
-1876.81
-3830.00
-5919.23
3287.87
-3354.38
-10445.87
176.84
198.40
255.29
888.94
801.30
724.51
395.9
499.9
688.1
4526.0
4291.3
4122.7
0.14
0.29
0.44
-0.24
0.25
0.78
1.93
2.14
2.95
31.12
26.45
23.08
0.001709
0.001790
0.002458
0.014285
0.013078
0.012172
-1.95
-1.22
1.48
2.02
-5.25
0.60
4.30 -41.95
4.91 -70.81
6.50 -105.39
20.44 257.54
20.58 -247.07
20.79 -325.65
0.256
0.444
0.664
1.083
1.042
1.446
-4773.04
-5510.91
-4560.62
-9635.55
159.44
164.94
249.15
793.07
384.3
420.3
641.6
4892.1
0.36
0.41
0.34
0.72
1.74
1.76
2.89
30.75
0.001498
0.001470
0.002458
0.015100
-0.99
0.18
-2.29
-11.59
3.97 -76.79
4.13 -87.54
6.26 -86.55
22.92 -352.69
0.491
0.561
0.540
1.546
Training 2011
STM2
STM3
-12057.11
-8787.05
724.89
717.25
4315.2
3853.9
0.90
0.66
24.80
21.46
0.013054
0.011596
-1.10
-8.78
21.56 -354.59
19.98 -292.47
1.583
1.292
DATE 12-FEB-2011
* * *
PILE GRP
JT
101P
102P
103P
104P
PL1
PL2
PL1
PL2
2.50
2.50
2.50
2.50
177.4
177.4
177.4
177.4
40.0
40.0
40.0
40.0
P I L E
M A X I M U M
A X I A L
C A P A C I T Y
-2139.6
-9529.9
-10445.9
-12057.1
-2139.6
-9529.9
-10445.9
-12057.1
OPR3
STM1
STM3
STM2
27.01
6.06
5.53
4.79
S U M M A R Y
* * *
5852.4
3864.2
3287.9
0.0
480
5852.4
3864.2
3287.9
0.0
STM2
9.94
STM3 15.04
STM1 17.68
OPR1 100.00
*MAXIMUM*
UNITY LOAD
CHECK CASE
0.15
0.25
0.27
0.31
STM2
STM1
STM3
STM2
---------------------------------------------------------------------------------------------------------------