Академический Документы
Профессиональный Документы
Культура Документы
ANTENNA GUIDE
FEbrUAry 2008
ANTENNAs rET
........................................................................................................................................................................................................................
TMAs & Filters In-Building Coverage Solutions Multi-Carrier Power Amplifiers Single, Dual and Triple Band Antennas VersaFlex Enclosure Solutions IntelliMast Clean Site Antennas Repeaters
W H AT S N E X T !
Did you know that Powerwave is now one of the top global providers of end-to-end wireless network infrastructure? Its true. From Antenna Systems to Base Station Systems to Coverage Systems, Powerwave has been aggressively expanding upon our power amplifier business to create a comprehensive portfolio of best-of-breed solutions. For example, world-class antennas, TMAs, filters and repeaters from LGP Allgon -acquired in 2004 - and industry leading filter and amplifier solutions from REMEC Wireless Systems and Filtronics Wireless Infrastructure business acquired in 2005 and 2006 - are now part of the Powerwave product and solutions portfolio. The advantage for you? A single-source for next-generation, end-to-end solutions that deliver higher reliability, greater efficiency, superior performance, and reduced CAPEX/OPEX. Learn more about our global manufacturing platform, design teams on multiple continents, and worldwide support network.
Visit www.powerwave.com
Powering the Next Wave of Growth in Wireless.
2008 Powerwave Technologies, Inc. Powerwave, Powerwave Technologies, and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc. VersaFlex, IntelliMast and Clean Site are trademarks of Powerwave Technologies, Inc. All rights reserved.
Table of Contents
POWERWAVE
Table of Contents
Page About Powerwave Technologies, Inc. Antenna Systems Antenna Products Broadband Antennas Single Broadband Antennas Cross Polarized High Broadband Cross Polarized Antennas, 1710-2170 MHz Low Broadband Cross Polarized Antennas, 806-960 MHz Vertical Polarized ALP Broadband Vertical Polarized Antennas, 806-960 MHz Dual Broadband Antennas Cross Polarized Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz Dual Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz Triple Broadband Antennas Cross Polarized Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz Single and Dual Band Antennas Single Band Antennas Cross Polarized ALX Cross Polarized Antennas, 806-896 X-Urban Cross Polarized Antennas, 824-896/870-960 MHz Vertical Polarized City Vertical Polarized Antennas, 806-896 MHz Metro Vertical Polarized Antennas, 1850-1990 MHz Omni Vertical Polarized Antennas, 806-896 MHz Urban Vertical Polarized Antennas, 824-896/870-960 MHz Dual Band Antennas Cross Polarized ALXC Cross Polarized Antennas, 870-960/1710-1880 MHz DB90 Cross Polarized Antennas, 806-960/1850-1990 MHz Vertical Polarized ALVC Vertical Polarized Antennas, 806-896/1850-1990 MHz Indoor Antennas Dual Band Indoor Antennas Cross Polarized Indoor Dual Band Cross Polarized Antennas, 824-896/850-990 MHz Multiband Indoor Antennas Vertical Polarized Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz Remote Electrical Tilt (RET) Clean Site Solutions Mounting Solutions Antenna FAQ Testing & Quality Overview Part Number Index 2 4 6 7
9 24 49
54 60
74 79
193
About Powerwave
About Powerwave
Powerwave Mission In pursuit of providing advanced wireless solutions, we are dedicated to profitable and sustainable growth. This is achieved through operational excellence and innovative technology. Driven by customer satisfaction, we deliver highly reliable products on time, through a focus on continuous improvement and teamwork. Powerwave is dedicated to delivering on its promises, exceeding expectations, and building strong and lasting relationships with its customers. Products and Solutions As a powerful global supplier of end-to-end wireless infrastructure solutions, Powerwave offers a broad product portfolio, including: Antenna Systems Base Station Systems Coverage Systems Powerwave has an extensive product line which includes Base Station Antennas, Antennas with Remote Electrical Tilt (RET), Clean Site Solutions, Tower Mounted Amplifiers, Filters, Power Amplifier Products, RF Conditioning Products, Full Range of Repeaters and Network Element Management Software along with VersaFlex Enclosure solutions. Our product portfolio covers most major frequency bands and air interfaces and is coupled with operational and engineering expertise through experience forged by delivering into countless networks throughout the world our entire range of wireless infrastructure products, including Single Carrier and Multi Carrier Power Amplifier products, base station antennas, tower mounted amplifiers, coverage solution products, various filter products along with a wide range of repeater products. Leveraging comprehensive RF and digital signal processing capabilities, Powerwave provides network operators and OEMs with cost-efficient, reliable base station solutions. Highly integrated components provide greater efficiency and reduced power consumption, which provides our customers faster time to market, and lower total cost of ownership. Powerwave delivers turn-key innovative commercial and public safety coverage and capacity solutions that give network operators, facilities owners and neutral hosts an edge over the competition. Designed for even the most challenging indoor and outdoor environments, Powerwaves modular and integrated solutions speed rollout of services, help improve coverage, signal quality and capacity, and are designed to reduce capital and operating expenses. Powerwave History Powerwave Technologies, Inc. (NASDAQ: PWAV) was founded in 1985. Originally operating under the name Milcom International, Inc., the company initially sold radio frequency (RF) power amplifiers for use in analog wireless networks. In 1993, the company entered the Air-to-Ground market, where amplifiers are used in both ground stations and in commercial aircraft to amplify telephone transmissions among airline passengers and ground-based networks. By 1995, the company began selling multi-carrier, ultra-linear RF power
About Powerwave
About Powerwave
amplifiers for installation in digital cellular networks being built in South Korea. In 1996, the company changed its name to Powerwave Technologies, Inc. and completed its initial public offering of common stock. In 1999 Powerwave acquired Hewlett-Packards RF amplifier business, which was focused on design and manufacture of RF amplifiers for cellular, PCS and wireless local loop systems. This acquisition helped Powerwave expand its product portfolio in key single carrier markets, such as GSM and TDMA. In 2001, Powerwave acquired Toracomm Ltd. a provider of transceiver designs for wireless base stations and handsets, LTCC and alumina-based RF modules, linearized PA designs for single/multicarrier applications and 3G baseband cores for wireless base station transceivers. This acquisition gave Powerwave a broad range of in-depth RF, DSP and system design and simulation expertise. In 2003, Powerwave acquired Ericsson Amplifier Technologies, Inc., which was a subsidiary of Ericsson located in New York focused on multi-carrier power amplifiers. In 2004, Powerwave acquired LGP Allgon, a global provider of wireless infrastructure equipment and coverage solutions. With this acquisition, the Powerwave product line was expanded to include: Antennas, TMA's, RF filters, Combiners, Repeaters, Boosters, and indoor coverage solutions, as well as a wide range of integrated products for use in wireless networks worldwide. In 2005, Powerwave acquired Kaval Wireless, a leading supplier of in-building and outdoor wireless coverage solutions. This acquisition extended Powerwaves product breadth and market reach in the coverage solutions marketplace with special emphasis on the public safety and government markets. Also in 2005, Powerwave acquired certain assets of REMEC, Inc.s Wireless Systems business, including its RF conditioning products, filters, tower-mounted amplifiers and RF power amplifiers. The REMEC acquisition further expanded Powerwaves leadership position in the wireless infrastructure marketplace while deepening and strengthening its customer relationships. In 2006, Powerwave expanded our product portfolio via the acquisition of the VersaFlex product line. This enclosure and shelter product allows for increased equipment deployment in a drastically reduced footprint when compared with the traditional site shelter construction. Also in 2006, we acquired specific product lines from Filtronics Wireless Infrastructure division to include transmit/receive filters, integrated remote radio heads and power amplifier products, all for use in commercial wireless infrastructure base station equipment. Today, Powerwave is the premier global source for end-to-end wireless infrastructure solutions. The company leads the industry in bringing new technologies to market that enable its network operator and OEM customers to build the next-generation wireless systems of tomorrow, today. Powerwave strives to offer products of exceptional quality and value. Built to withstand the demands of todays wireless networks, Powerwaves products are designed for use in cellular, PCS and 3G base stations throughout the world. Committed to operational excellence and continuous improvement, Powerwave consistently invests in the development of world-class capabilities to ensure flawless execution from initial concept to delivery. With global R&D and manufacturing facilities, Powerwave is positioned to provide the best value to its OEM and wireless network operator customers.
Antenna Systems
Antenna Systems
A Tradition of Quality Since 1946 Powerwave delivers antennas to customers around the world, offering solutions for all mobile telephony standards. Our designers and engineers build on years of experience; we have developed and manufactured top-quality antennas since 1946 from our core platform; formerly under the industry leading Allgon brand name. State of the Art Antennas are the Key to Reducing Total Cost of Ownership The Powerwave broadband multiband antennas offer network operators fast and successful roll-out of next generation networks with excellent RF-performance. Our antennas are designed to overcome 3G deployment challenges, such as space and installation issues as well as various co-siting scenarios. The Powerwave broadband antenna technology simplifies logistics for network operators active in multiple markets.
Antenna Products
Broadband Antennas The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provide a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value. Single Band Antennas The Powerwave single band antennas outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio), isolation, beam squint and tracking. This design ensures minimized intermodulation issues, thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at 45 to provide the independently fading signals needed for achieving top-quality coverage. As a result of thorough, in-depth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance. Dual Band Antennas The Powerwave dual band, broadband antennas are available in a variety of designs combining a low broadband with a high broadband or a high broadband with another high broadband. The Powerwave dual band antennas are built on patented and well proven aperture-coupled patch technology and are available both as vertical polarized as well as cross polarized. Easy-to-install dual band antennas from Powerwave are deployed in numerous, wireless networks worldwide. All have endured extensive field trials in close collaboration with cell planners and other communications providers to ensure Powerwave dual band antennas perform to expectations.
Antenna Systems
Antenna Systems
Omni Antennas The Powerwave omni-directional antenna consists of sleeve dipole elements welded to a thick-walled one-piece aluminum tube. This technique makes for an exceptionally stable structure that keeps tip deflections to a minimum even in gale-force winds. The cabling inside the tube combines with sophisticated, compact technology to ensure stable, well-controlled radiation patterns throughout the systems entire frequency band. Indoor Antennas The indoor antenna is designed to blend into a wall or ceiling inside a building and is the base antenna for the Powerwave distributed antenna system. The indoor antenna covers all bands from 800 MHz up to 2500 MHz and supports multiband operation. Easy-to-install dual band antennas from Powerwave are deployed in numerous wireless networks worldwide. Using fewer antennas of discreetly functional design is an improvement over using numerous antennas of unsightly size and appearance, especially with today's aesthetic concerns. Remote Electrical Tilt Antennas (RET) The Powerwave Remote Electrical Tilt (RET) system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. The system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus. ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system. Clean Site Solutions Clean Site solutions minimize the visual impact of a complete antenna system and significantly reduces investment and operational costs for network operators when building new or upgrading existing networks. Building permits for existing antenna installations can be used when replacing old, passive antennas with the Clean Site solution. This simplifies the site acquisition process significantly and shortens roll-out time considerably. All Clean Site antennas support Remote Electrical Tilt for optimization of the coverage footprint and tuning of network performance. By integrating all functionality into one single unit, Clean Site offers you a flexible and attractive solution in the most cost efficient way. Mounting Solutions Our mounting solutions consist of rugged brackets with an aesthetic design and the flexibility to address multiple situations and requirements. All Powerwave antennas are delivered with mounting brackets pre-mounted. The intent is to reduce logistic and tower crew installation costs for our customers. All brackets have a high quality surface treatment to maintain the Powerwave standard for product exposure to severe environments. By using steel in the sheet metal parts of the tilt brackets, a robust and rigid design is ensured.
A Tradition of Quality Since 1946 Powerwave delivers antennas to customers around the world, offering solutions for all mobile telephony standards. Our designers and engineers build on years of experience; we have developed and manufactured top-quality antennas since 1946 from our core platform formerly under the industry leading Allgon brand name. State of the Art Antennas are the Key to Reducing Total Cost of Ownership The Powerwave broadband multiband antennas offer network operators fast and successful roll-out of next generation networks with excellent RF-performance. Our antennas are designed to overcome 3G deployment challenges, such as space and installation issues as well as various co-siting scenarios. The Powerwave broadband antenna technology simplifies logistics for network operators active in multiple markets.
Broadband Single and Dual Band Indoor Remote Electrical Tilt (RET) Clean Site Solutions Mounting Solutions
The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provide a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.
Broadband Antennas
POWERWAVE
Broadband Antennas
POWERWAVE
Gain dBi dBd 15.6/13.5 15.8/13.7 15.8/13.7 18.1/16 18.1/16 18.1/16 18.1/16 18.2/16.1 18.3/16.2 18/15.9 19.5/17.4 14.1/12 16.7/14.6 17.9/15.8
Tilt MET FET FET FET FET MET MET FET MET MET MET MET MET MET
Length 0.7m (2'3") 0.7m (2'3") 0.7m (2'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 2.0m (6'6") 0.7m (2'3") 1.3m (4'3") 2.0m (6'6")
Page 10 11 12 13 14 15 16 17 18 19 20 21 22 23
POWERWAVE
7720.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.6/13.5 TILT: MET LENGTH: 0.7m (2'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >17,16,16,15,15@0,4,8,12,16 >30 <1.5 >-29,typical>-25 0.5 >30 >25 >15 >15 <-153 67 14.1 1710-1880 15/12.9 1710-2170 1850-1990 15.1/13 Dual linear 45 50 <1.4:1 65 13.5 0 to 16 >17,16,16,15,15@0,4,8,12,16 >30 <1.5 >-29,typical>-25 0.5 >30 >25 >15 >15 <-153 250 500 >17,16,16,15,15@0,4,8,12,16 >30 <1.5 >-29,typical>-25 0.5 >30 >25 >18 >13 <-160 64 12.5 1920-2170 15.6/13.5
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 709x167x89.5 (2'3"x6"x3") Pre-mounted standard brackets 8.2 (18) 4.5 (9.9) 286 42 (93) 55 (123) DC grounded ASA Light Grey 880x200x200 (2'11"x8"x8") 11.5 (25.3) 7010.00, 7011.00, 7012.00 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
2140 MHz 10
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7700.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.8/13.7 TILT: FET LENGTH: 0.7m (2'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19 >30 <1.0 >-20,typical>-18 0.6 >30 >26 >17 >17 <-153 67 14.7 1710-1880 15.1/13 Dual linear 45 50 <1.3:1 66 13.8 0 >19 >30 <1.0 >-20,typical>-18 0.6 >30 >26 >17 >15 <-153 250 500 >30 <1.0 >-20,typical>-18 0.6 >30 >26 >19 >11 <-160 64 12.8 1710-2170 1850-1990 1920-2170 15.8/13.7
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 709x167x89.5 (2'3"x6"x3") Pre-mounted standard brackets 6.7 (14.8) 3 (6.6) 286 42 (93) 55 (123) DC grounded ASA Light Grey 880x200x200 (2'11"x 8"x 8") 10 (22) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
2140 MHz 11
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7700.06
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.8/13.7 TILT: FET LENGTH: 0.7m (2'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >17 >30 <1.0 >-26,typical>-20 0.6 >30 >26 >17 >17 <-153 67 14.7 1710-1880 15/12.9 1710-2170 1850-1990 15.5/13.4 Dual linear 45 50 <1.3:1 65 13.8 6 >17 >30 <1.0 >-26,typical>-20 0.6 >30 >26 >17 >15 <-153 250 500 >17 >30 <1.0 >-26,typical>-20 0.6 >30 >26 >19 >11 <-160 64 12.8 1920-2170 15.8/13.7
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 709x167x89.5 (2'3"x6"x3") Pre-mounted standard brackets 6.7 (14.8) 3 (6.6) 286 42 (93) 55 (123) DC grounded ASA Light Grey 880x200x200 (2'11"x 8"x 8") 10 (22) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
2140 MHz 12
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7701.02
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.1/16 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19 >30 <1.0 >-22,typical>-18 0.5 >30 >26 >17 >17 <-153 67 7.2 1710-1880 17.4/15.3 1710-2170 1850-1990 17.8/15.7 Dual linear 45 50 <1.3:1 66 6.7 2 >19 >30 <1.0 >-22,typical>-18 0.5 >30 >26 >17 >14 <-150 250 500 >19 >30 <1.0 >-22,typical>-18 0.5 >30 >26 >20 >11 <-160 64 6.4 1920-2170 18.1/16
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1309x167x89.5 (4'3"x6"x3") Pre-mounted standard brackets 7.7 (16.9) 4 (8.8) 528 42 (93) 55 (123) DC grounded ASA Light Grey 1480x200x200 (4'10"x8"x8") 11.5 (25.3) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
2140 MHz 13
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7701.06
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.1/16 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18 >30 <1.0 >-26,typical>-20 0.5 >29 >25 >17 >17 <-153 67 7.2 1710-1880 17.5/15.4 1710-2170 1850-1990 17.8/15.7 Dual linear 45 50 <1.3:1 65 6.7 6 >18 >30 <1.0 >-26,typical>-20 0.5 >29 >25 >17 >14 <-153 250 500 >18 >30 <1.0 >-26,typical>-20 0.5 >29 >25 >20 >11 <-160 64 6.4 1920-2170 18.1/16
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1309x167x89.5 (4'3"x6"x3") Pre-mounted standard brackets 7.7 (16.9) 4 (8.8) 528 42 (93) 55 (123) DC grounded ASA Light Grey 1480x200x200 (4'10"x8"x8") 11.5 (25.3) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
2140 MHz 14
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7721.02
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.1/16 TILT: MET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,19,18,17,16@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >18 <-153 67 7 1710-1880 17.5/15.4 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 66 6.6 2 to 10 >20,20,19,19,18@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >14 <-153 250 500 >20,20,19,19,18@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >20 >12 <-160 64 6.3 1920-2170 18.1/16
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1309x167x89.5 (4'3"x6"x3") Pre-mounted standard brackets 9.7 (21.3) 6 (13.2) 528 42 (93) 55 (123) DC grounded ASA Light Grey 1480x200x200 (4'10"x8"x8") 13.5 (29.7) 7010.00, 7011.00, 7012.00 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
2140 MHz 15
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7721.10
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.1/16 TILT: MET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,19,18,17,16@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >18 <-153 67 7 1710-1880 17.5/15.4 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 66 6.6 2 to 10 >20,20,19,19,18@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >14 <-153 250 500 >20,20,19,19,18@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >20 >12 <-160 64 6.3 1920-2170 18.1/16
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1309x167x89.5 (4'3"x6"x3") No pre-mounted bracket. 9.7 (21.3) 6 (13.2) 528 42 (93) 55 (123) DC grounded ASA Light Grey 1480x200x200 (4'10"x8"x8") 13.5 (29.7) 7010.00, 7011.00, 7012.00 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
2140 MHz 16
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7701.00
POLARIZATION: x-pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.2/16.1 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-20,typical>-18 0.5 >30 >27 >17 >17 <-153 67 7.2 1710-1880 17.5/15.4 Dual linear 45 50 <1.3:1 66 6.7 0 >20 >30 <1.0 >-20,typical>-18 0.5 >30 >27 >17 >14 <-150 250 500 >30 <1.0 >-20,typical>-18 0.5 >30 >27 >20 >11 <-160 64 6.4 1710-2170 1850-1990 1920-2170 18.2/16.1
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1309x167x89.5 (4'3"x6"x3") Pre-mounted standard brackets 7.7 (16.9) 4 (8.8) 528 42 (93) 55 (123) DC grounded ASA Light Grey 1480x200x200 (4'10"x8"x8") 11.5 (25.3) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
2140 MHz 17
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7721.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.3/16.2 TILT: MET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,18,16,16,14,@0,2,4,6,8 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >18 <-153 67 7 1710-1880 17.6/15.5 1710-2170 1850-1990 18/15.9 Dual linear 45 50 <1.4:1 66 6.6 0 to 8 >18,18,16,16,14,@0,2,4,6,8 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >14 <-153 250 500 >18,18,16,16,14,@0,2,4,6,8 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >20 >12 <-160 64 6.3 1920-2170 18.3/16.2
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1309x167x89.5 (4'3"x6"x3") Pre-mounted standard brackets 9.7 (21.3) 6 (13.2) 528 42 (93) 55 (123) DC grounded ASA Light Grey 1480x200x200 (4'10"x8"x8") 13.5 (29.7) 7010.00, 7011.00, 7012.00 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
2140 MHz 18
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7721.06
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: MET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,19,18,17,16@6,8,10,12,14 >30 <2 >-24,typical>-18 0.5 >30 >27 >17 >18 <-153 67 7.3 1710-1880 17.5/15.4 1710-2170 1850-1990 17.8/15.7 Dual linear 45 50 <1.4:1 66 6.9 6 to 14 >20,20,20,19,18@6,8,10,12,14 >30 <2 >-24,typical>-18 0.5 >30 >27 >17 >14 <-153 250 500 >20,20,20,19,18@6,8,10,12,14 >30 <2 >-24,typical>-18 0.5 >30 >27 >20 >12 <-160 64 6.6 1920-2170 18/15.9
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1309x167x89.5 (4'3"x6"x3") Pre-mounted standard brackets 9.7 (21.3) 6 (13.2) 528 42 (93) 55 (123) DC grounded ASA Light Grey 1480x200x200 (4'10"x8"x8") 13.5 (29.7) 7010.00, 7011.00, 7012.00 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
2140 MHz 19
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7722.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 19.5/17.4 TILT: MET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,18,18,16,16,14,@0,1,2,3,4,5 >30 <1.0 >-20,typical>-16 0.4 >30 >27 >19 >20 <-153 67 4.7 1710-1880 19/16.9 1710-2170 1850-1990 19.2/17.1 Dual slant 45 50 <1.4:1 66 4.4 0 to 5.5 >18,18,18,16,16,14,@0,1,2,3,4,5 >30 <1.0 >-20,typical>-16 0.4 >30 >27 >19 >17 <-153 250 500 >18,18,18,16,16,14,@0,1,2,3,4,5 >30 <1.0 >-20,typical>-16 0.4 >30 >27 >21 >12 <-160 65 4.2 1920-2170 19.5/17.4
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1934x167x89.5 (6'4"x6"x3") Pre-mounted standard brackets 14 (31) 8.5 (18.7) 780 42 (93) 55 (123) DC grounded ASA Light Grey 2105x200x200 (6'11"x8"x8") 15.5 (34.1) 7010.00, 7011.00, 7012.00 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
2140 MHz 20
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7735.00A
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 14.1/12 TILT: MET LENGTH: 0.7m (2'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,17,16,15,14@0,4,8,12,16 >30 <1.0 >-24,typical>-18 0.8 >25 >23 >13 >10 -153 86 14.7 1710-1880 13.6/11.5 1710-2170 1850-1990 13.8/11.7 Dual linear 45 50 <1.4:1 86 13.4 0 to 16 >18,17,16,15,14@0,4,8,12,16 >30 <1.0 >-24,typical>-18 0.8 >25 >23 >13 >10 -153 250 500 >18,17,16,15,14@0,4,8,12,16 >30 <1.0 >-24,typical>-18 0.8 >25 >23 >12 >10 <-160 87 12.2 1920-2170 14.1/12
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 709x167x89.5 (2'3"x6"x3") Pre-mounted standard brackets 9.7 (21.3) 6 (13.2) 286 42 (93) 55 (123) DC grounded ASA Light Grey 880x200x200 (2'11"x8"x8") 13 (28.6) 7010.00, 7011.00, 7012.00 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
2140 MHz 21
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7740.00A
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.7/14.6 TILT: MET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,17,15,15,14@0,2,4,6,8 30 <1.0 >-24,typical>-18 0.4 >29 >23 >14 >10 <-153 86 7.1 1710-1880 16.2/14.1 1710-2170 1850-1990 16.4/14.3 Dual linear 45 50 <1.4:1 86 6.6 0 to 8 >18,17,15,15,14@0,2,4,6,8 30 <1.0 >-24,typical>-18 0.4 >29 >23 >14 >10 <-153 250 500 >18,17,15,15,14@0,2,4,6,8 30 <1.0 >-24,typical>-18 0.4 >29 >23 >12 >10 <-160 86 6.3 1920-2170 16.7/14.6
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1309x167x89.5 (4'3"x6"x3") Pre-mounted standard brackets 11.7 (25.7) 8 (17.6) 528 42 (93) 55 (123) DC grounded ASA Light Grey 1480x200x200 (4'10"x8"x8") 15.5 (34.1) 7010.00, 7011.00, 7012.00 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
2140 MHz 22
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7745.00A
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 17.9/15.8 TILT: MET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,18,16,16,14,14,@0,1,2,3,4,5 >30 <1.0 >-24,typical>-18 0.3 >29 >23 >14 >10 <-153 86 4.7 1710-1880 17.5/15.4 1710-2170 1850-1990 17.6/15.5 Dual linear 45 50 <1.4:1 86 4.5 0 to 5.5 >18,18,16,16,14,14,@0,1,2,3,4,5 >30 <1.0 >-24,typical>-18 0.3 >29 >23 >14 >10 <-153 250 500 >18,18,16,16,14,14,@0,1,2,3,4,5 >30 <1.0 >-24,typical>-18 0.3 >29 >23 >12 >10 <-160 86 4.2 1920-2170 17.9/15.8
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1934x167x89.5 (6'4"x6"x3") Pre-mounted standard brackets 15.9 (35) 10.4 (22.9) 780 42 (93) 55 (123) DC grounded ASA Light Grey 2105x200x200 (6'11"x8"x8") 18 (39.6) 7010.00, 7011.00, 7012.00 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
2140 MHz 23
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
Gain dBi dBd 14.5/12.4, 15/12.9 14.6/12.5, 15.1/13 14.6/12.5, 15.1/13 14.6/12.5, 15/12.9 15.6/13.5, 16.2/14.1 15.8/13.7, 16.3/14.2 16.9/14.8, 17.3/15.2 16/13.9, 16.5/14.4 17/14.9, 17.4/15.3 17/14.9, 17.4/15.3 16/13.9, 16.5/14.4 17.2/15.1, 17.5/15.4 13.5/11.4, 14/11.9 13.5/11.4, 14/11.9 13.6/11.5, 14.1/12 13.6/11.5, 14/11.9 14.8/12.7, 15.4/13.3 14.8/12.7, 15.5/13.4 15.8/13.7, 16.3/14.2 15.8/13.7, 16.3/14.2 15.9/13.8, 16.3/14.2 15.9/13.8, 16.4/14.3 15/12.9, 15.5/13.4 15/12.9, 15.5/13.4
Tilt FET FET FET MET FET FET FET FET FET FET MET MET MET FET FET FET FET MET FET FET MET FET FET FET
Length 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 2.0m (6'6") 2.0m (6'6") 2.6m (8'6") 2.0m (6'6") 2.6m (8'6") 2.6m (8'6") 2.0m (6'6") 2.6m (8'6") 1.3m (4'3") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 2.0m (6'6") 2.0m (6'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.0m (6'6") 2.0m (6'6")
Page 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
24
POWERWAVE
7476.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.5/12.4, 15/12.9 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19 30 <1.0 <-25 1 >30 >25 >12 <-150 400 800 66 15.9 0 >19 30 <1.0 <-25 1 >30 >25 >12 806-896 14.5/12.4 Dual linear 45 50 1.4:1 64 15.3 806-960 880-960 15/12.9
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1270x280x125 (4'2"x11"x4") Pre-mounted heavy duty brackets 14 (30.8) 8.5 (18.7) 859 42 (93) 55 (123) DC grounded GRP Light Grey 1475x355x255 (4'10"x1'2"x10") 18 (39.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 25
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7476.02
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.6/12.5, 15.1/13 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19 30 <1.0 <-25 1 >30 >25 >12 <-150 400 800 66 14.9 2 >19 30 <1.0 <-25 1 >30 >25 >12 806-896 14.6/12.5 Dual linear 45 50 1.4:1 64 13.8 806-960 880-960 15.1/13
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1270x280x125 (4'2"x11"x4") Pre-mounted heavy duty brackets 14 (30.8) 8.5 (18.7) 859 42 (93) 55 (123) DC grounded GRP Light Grey 1475x355x255 (4'10"x1'2"x10") 18 (39.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 26
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7476.06
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.6/12.5, 15.1/13 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19 30 <1.0 <-25 1 >30 >25 >12 <-150 400 800 66 15.3 6 >19 30 <1.0 <-25 1 >30 >25 >12 806-896 14.6/12.5 Dual linear 45 50 1.4:1 64 13.9 806-960 880-960 15.1/13
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1270x280x125 (4'2"x11"x4") Pre-mounted heavy duty brackets 14 (30.8) 8.5 (18.7) 859 42 (93) 55 (123) DC grounded GRP Light Grey 1475x355x255 (4'10"x1'2"x10") 18 (39.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 27
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7471.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.6/12.5, 15/12.9 TILT: MET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,18,17@2,7,12 30 <2.0 <-25 1 >25 >24 >10 <-150 400 800 65 15.3 2 to 12 >19,18,17@2,7,12 30 <2.0 <-25 1 >25 >25 >10 806-896 14.6/12.5 Dual linear 45 50 1.5:1 65 14.2 806-960 880-960 15/12.9
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1270x280x125 (4'2"x11"x4") Pre-mounted heavy duty brackets 14.5 (31.9) 9 (19.8) 859 42 (93) 55 (123) DC grounded GRP Light Grey 1475x355x255 (4'10"x1'2"x10") 18.5 (40.7) 7010.00, 7011.00, 7012.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 28
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7477.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.6/13.5, 16.2/14.1 TILT: FET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 30 <1.0 <-18 0.5 >30 >25 >12 <-150 400 800 66 9.5 0 >20 30 <1.0 <-18 0.5 >30 >25 >12 806-896 15.6/13.5 Dual linear 45 50 1.4:1 64 9 806-960 880-960 16.2/14.1
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 2020x280x125 (6'7"x11"x4") Pre-mounted heavy duty brackets 18.5 (40.7) 13 (28.6) 1366 42 (93) 55 (123) DC grounded GRP Light Grey 2225x355x255 (7'3"x1'2"x10") 23 (50.7) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 29
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7477.02
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.8/13.7, 16.3/14.2 TILT: FET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 30 <2.0 <-18 0.5 >30 >25 >12 <-150 400 800 66 9.5 2 >20 30 <2.0 <-18 0.5 >30 >25 >12 806-896 15.8/13.7 Dual linear 45 50 1.4:1 64 9 806-960 880-960 16.3/14.2
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 2020x280x125 (6'7"x11"x4") Pre-mounted heavy duty brackets 18.5 (40.7) 13 (28.6) 1366 42 (93) 55 (123) DC grounded GRP Light Grey 2225x355x255 (7'3"x1'2"x10") 23 (50.7) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 30
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7478.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.9/14.8, 17.3/15.2 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 30 <1.0 <-18 0.3 >30 >25 >12 <-150 400 800 66 7.3 0 >20 30 <1.0 <-18 0.3 >30 >25 >12 806-896 16.9/14.8 Dual linear 45 50 1.4:1 64 7 806-960 880-960 17.3/15.2
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 2520x280x125 (8'3"x11"x4") Pre-mounted heavy duty brackets 22.5 (49.6) 17 (37.4) 1704 42 (93) 55 (123) DC grounded GRP Light Grey 2725x355x255 (8'11"x1'2"x10") 27.5 (60.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 31
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7477.06
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16/13.9, 16.5/14.4 TILT: FET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 30 <1.0 <-18 0.5 >30 >25 >12 <-150 400 800 66 9.5 6 >20 30 <1.0 <-18 0.5 >30 >25 >12 806-896 16/13.9 Dual linear 45 50 1.4:1 64 9 806-960 880-960 16.5/14.4
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 2020x280x125 (6'7"x11"x4") Pre-mounted heavy duty brackets 18.5 (40.7) 13 (28.6) 1366 42 (93) 55 (123) DC grounded GRP Light Grey 2225x355x255 (7'3"x1'2"x10") 23 (50.7) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 32
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7478.02
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17/14.9, 17.4/15.3 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 30 <1.0 <-18 0.3 >30 >25 >12 <-150 400 800 66 7.3 2 >20 30 <1.0 <-18 0.3 >30 >25 >12 806-896 17/14.9 Dual linear 45 50 1.4:1 64 7 806-960 880-960 17.4/15.3
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 2520x280x125 (8'3"x11"x4") Pre-mounted heavy duty brackets 22.5 (49.6) 17 (37.4) 1704 42 (93) 55 (123) DC grounded GRP Light Grey 2725x355x255 (8'11"x1'2"x10") 27.5 (60.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 33
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7478.06
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17/14.9, 17.4/15.3 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 30 <1.0 <-18 0.3 >30 >25 >12 <-150 400 800 66 7.3 6 >20 30 <1.0 <-18 0.3 >30 >25 >12 806-896 17/14.9 Dual linear 45 50 1.4:1 64 7 806-960 880-960 17.4/15.3
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 2520x280x125 (8'3"x11"x4") Pre-mounted heavy duty brackets 22.5 (49.6) 17 (37.4) 1704 42 (93) 55 (123) DC grounded GRP Light Grey 2725x355x255 (8'11"x1'2"x10") 27.5 (60.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 34
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7472.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 66 GAIN (dBi/dBd): 16/13.9, 16.5/14.4 TILT: MET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,4,7 30 <2.0 <-18 0.5 >30 >25 >11 <-150 400 800 67 10 0 to 7.5 >20,17,15@0,4,7 30 <2.0 <-18 0.5 >30 >25 >11 806-896 16/13.9 Dual linear 45 50 1.4:1 64 9 806-960 880-960 16.5/14.4
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 2020x280x125 (6'7"x11"x4") Pre-mounted heavy duty brackets 20 (44) 14.5 (31.9) 1366 42 (93) 55 (123) DC grounded GRP Light Grey 2225x355x255 (7'3"x1'2"x10") 24.5 (54) 7010.00, 7011.00, 7012.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 35
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7473.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 66 GAIN (dBi/dBd): 17.2/15.1, 17.5/15.4 TILT: MET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,2,5 30 <2.0 <-18 0.3 >30 >25 >11 <-150 400 800 67 7.5 0 to 5.5 >20,17,15@0,2,5 30 <2.0 <-18 0.3 >30 >25 >11 806-896 17.2/15.1 Dual linear 45 50 1.4:1 64 7 806-960 880-960 17.5/15.4
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 2520x280x125 (8'3"x11"x4") Pre-mounted heavy duty brackets 24 (52.9) 18.5 (40.7) 1704 42 (93) 55 (123) DC grounded GRP Light Grey 2725x355x255 (8'11"x1'2"x10") 28 (61.7) 7010.00, 7011.00, 7012.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 36
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7481.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.5/11.4, 14/11.9 TILT: MET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,18,17@2,7,12 >30 <2 <-18 0.5 >27 >23 >9 -150 400 600 87 15 2 to 12 >19,18,17@2,7,12 >30 <2 <-18 0.5 >27 >23 >9 806-896 13.5/11.4 Dual linear 45 50 <1.4:1 85 14 806-960 880-960 14/11.9
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1270x280x125 (4'2"x11"x4") Pre-mounted heavy duty brackets 18.5 (40.7) 13 (28.6) 859 42 (93) 55 (123) DC grounded GRP Light Grey 1475x355x255 (4'10"x1'2"x10") 22.5 (49.6) 7010.00, 7011.00, 7012.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 37
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7486.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.5/11.4, 14/11.9 TILT: FET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-21 0.6 >27 >22 >21 >10 <-150 400 600 87 15.5 0 >20 >30 <1.0 >-25 0.4 >27 >22 >21 >11 806-896 13.5/11.4 Dual linear 45 50 <1.4:1 84 14 806-960 880-960 14/11.9
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1270x280x125 (4'2"x11"x4") Pre-mounted heavy duty brackets 16.5 (36.3) 11 (24.2) 859 42 (93) 55 (123) DC grounded GRP Light Grey 1475x355x255 (4'10"x1'2"x10") 20.5 (45.1) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 38
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7486.02
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.6/11.5, 14.1/12 TILT: FET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-23 0.4 >28 >22 >21 >10 <-150 400 600 87 15.4 2 >20 >30 <1.0 >-25 0.4 >28 >22 >21 >11 806-896 13.6/11.5 Dual linear 45 50 1.4:1 84 14 806-960 880-960 14.1/12
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1270x280x125 (4'2"x11"x4") Pre-mounted heavy duty brackets 16.5 (36.3) 11 (24.2) 859 42 (93) 55 (123) DC grounded GRP Light Grey 1475x355x255 (4'10"x1'2"x10") 20.5 (45.1) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 39
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7486.06
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.6/11.5, 14/11.9 TILT: FET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18 >30 <1.0 >-25 0.6 >27 >22 >22 >10 <-150 400 600 87 15.5 6 >18 >30 <1.0 >-25 0.6 >28 >22 >22 >11 806-896 13.6/11.5 Dual linear 45 50 <1.4:1 85 13.9 806-960 880-960 14/11.9
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1270x280x125 (4'2"x11"x4") Pre-mounted heavy duty brackets 16.5 (36.3) 11 (24.2) 859 42 (93) 55 (123) DC grounded GRP Light Grey 1475x355x255 (4'10"x1'2"x10") 20.5 (45.1) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 40
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7487.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 14.8/12.7, 15.4/13.3 TILT: FET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-20 0.1 >28 >22 >20 >10 <-150 400 600 87 9.7 0 >20 >30 <1.0 >-18 0.2 >29 >22 >20 >10 806-896 14.8/12.7 Dual linear 45 50 <1.4:1 84 9 806-960 880-960 15.4/13.3
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 2020x280x125 (6'7"x11"x4") Pre-mounted heavy duty brackets 20.5 (45.1) 15 (33) 1366 42 (93) 55 (123) DC grounded GRP Light Grey 2225x355x255 (7'3"x1'2"x10") 25 (55.1) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 41
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7482.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 14.8/12.7, 15.5/13.4 TILT: MET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,4,7 >30 <1.0 >-25 0.4 >27 >22 >20 >10 <-150 400 600 88 9.6 0 to 7.5 >20,17,15@0,4,7 >30 <1.0 >-20 0.4 >27 >22 >20 >10 806-896 14.8/12.7 Dual linear 45 50 <1.4:1 86 9 806-960 880-960 15.5/13.4
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 2020x280x125 (6'7"x11"x4") Pre-mounted heavy duty brackets 22.5 (49.6) 17 (37.4) 1366 42 (93) 55 (123) DC grounded GRP Light Grey 2225x355x255 (7'3"x1'2"x10") 27 (59.5) 7010.00, 7011.00, 7012.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 42
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7488.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15.8/13.7, 16.3/14.2 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-18 0.2 >27 >22 >21 >10 <-150 400 600 87 7.6 0 >20 >30 <1.0 >-18 0.1 >27 >22 >21 >10 806-896 15.8/13.7 Dual linear 45 50 <1.4:1 84 7 806-960 880-960 16.3/14.2
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 2520x280x125 (8'3"x11"x4") Pre-mounted heavy duty brackets 24.5 (54) 19 (41.8) 1704 42 (93) 55 (123) DC grounded GRP Light Grey 2725x355x255 (8'11"x1'2"x10") 29.5 (65) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 43
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7488.02
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15.8/13.7, 16.3/14.2 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-18 0.3 >26 >22 >20 >10 <-150 400 600 87 7.6 2 >20 >30 <1.0 >-18 0.2 >27 >22 >20 >10 806-896 15.8/13.7 Dual linear 45 50 <1.4:1 84 7 806-960 880-960 16.3/14.2
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 2520x280x125 (8'3"x11"x4") Pre-mounted heavy duty brackets 24.5 (54) 19 (41.8) 1704 42 (93) 55 (123) DC grounded GRP Light Grey 2725x355x255 (8'11"x1'2"x10") 29.5 (65) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 44
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7483.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15.9/13.8, 16.3/14.2 TILT: MET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,2,5 >30 <1.0 >-23 0.3 >27 >22 >21 >10 <-150 400 600 87 7.5 0 to 5.5 >20,17,15@0,2,5 >30 <1.0 >-21 0.3 >28 >22 >21 >10 806-896 15.9/13.8 Dual linear 45 50 <1.4:1 84 6.9 806-960 880-960 16.3/14.2
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 2520x280x125 (8'3"x11"x4") Pre-mounted heavy duty brackets 26.5 (58.4) 21 (46.2) 1704 42 (93) 55 (123) DC grounded GRP Light Grey 2725x355x255 (8'11"x1'2"x10") 31.5 (69.4) 7010.00, 7011.00, 7012.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 45
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7488.06
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15.9/13.8, 16.4/14.3 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-20 0.1 >26 >22 >20 >10 <-150 400 600 87 7.6 6 >20 >30 <1.0 >-20 0.2 >27 >22 >20 >10 806-896 15.9/13.8 Dual linear 45 50 <1.4:1 84 7 806-960 880-960 16.4/14.3
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 2520x280x125 (8'3"x11"x4") Pre-mounted heavy duty brackets 24.5 (54) 19 (41.8) 1704 42 (93) 55 (123) DC grounded GRP Light Grey 2725x355x255 (8'11"x1'2"x10") 29.5 (65) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 46
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7487.02
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15/12.9, 15.5/13.4 TILT: FET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-20 0.3 >28 >22 >20 >10 <-150 400 600 87 9.7 2 >20 >30 <1.0 >-18 0.2 >29 >22 >20 >10 806-896 15/12.9 Dual linear 45 50 <1.4:1 84 9 806-960 880-960 15.5/13.4
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 2020x280x125 (6'7"x11"x4") Pre-mounted heavy duty brackets 20.5 (45.1) 15 (33) 1366 42 (93) 55 (123) DC grounded GRP Light Grey 2225x355x255 (7'3"x1'2"x10") 25 (55.1) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 47
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7487.06
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15/12.9, 15.5/13.4 TILT: FET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >17 >30 <1.0 >-20 0.1 >28 >22 >20 >10 <-150 400 600 87 9.7 6 >20 >30 <1.0 >-20 0.2 >28 >22 >20 >10 806-896 15/12.9 Dual linear 45 50 <1.4:1 84 9 806-960 880-960 15.5/13.4
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 2020x280x125 (6'7"x11"x4") Pre-mounted heavy duty brackets 20.5 (45.1) 15 (33) 1366 42 (93) 55 (123) DC grounded GRP Light Grey 2225x355x255 (7'3"x1'2"x10") 25 (55.1) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz 48
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
Page 50 51 52 53
49
POWERWAVE
7804.00
POLARIZATION: Vertical Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 40 GAIN (dBi/dBd): 17.5/15.4 TILT: FET LENGTH: 2.7m (8'10")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) >18 none <0.2 >35 <-146 500 40 15 0 >18 none <0.2 >35 806-896 17.5/15.4 Linear vertical 50 <1.4:1 40 15 806-960 880-960 17.5/15.4
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Back 1320x590x350 (4'4"x1'11"x1'1") Pre-mounted heavy duty brackets 16.5 (36.3) 11 (23.2) 1881 42 (93) 55 (123) DC grounded PVC Light Gray 1389x627x394 (47x21x14) 17.3 (38) 7256.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7824.00
POLARIZATION: Vertical Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 80 GAIN (dBi/dBd): 14.5/12.4 TILT: FET LENGTH: 2.7m (8'10")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) >18 none <0.2 >28 <-146 500 80 15 0 >18 none <0.2 >28 806-896 14.5/12.4 Linear vertical 50 <1.4:1 80 15 806-960 880-960 14.5/12.4
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Back 1320x330x290 (4'4"x1'1"x11") Pre-mounted heavy duty brackets 12.9 (28.4) 7.4 (16.3) 1052 42 (93) 55 (123) DC grounded PVC Light Gray 1346x360x335 (45x12x11) 13 (28.6) 7256.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7834.00
POLARIZATION: Vertical Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 14.0/11.9 TILT: FET LENGTH: 2.7m (8'10")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) >18 none <0.2 30 <-146 500 90 15 0 >18 none <0.2 30 806-896 14.0/11.9 Linear vertical 50 <1.4:1 90 15 806-960 880-960 14.0/11.9
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Back 1320x290x290 (4'4"x11"x11") Pre-mounted heavy duty brackets 12.4 (27.3) 6.9 (15.2) 925 42 (93) 55 (123) DC grounded PVC Light Gray 1346x275x335 (45x11x11) 12 (26.5) 7256.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7838.00
POLARIZATION: Vertical Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.8/14.7 TILT: FET LENGTH: 2.7m (8'10")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) >20 20 <0.2 30 <-146 500 90 7.4 0 >20 20 <0.2 30 806-896 16.8/14.7 Linear vertical 50 <1.4:1 90 7.4 806-960 880-960 16.8/14.7
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Back 2600x290x290 (8'6"x11"x11") Pre-mounted heavy duty brackets 16.6 (36.5) 11.1 (24.4) 1821 42 (93) 55 (123) DC grounded PVC Light Gray 2650x275x335 (88x11x11) 24 (53) 7256.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
Gain dBi dBd 17.7/15.6, 17.7/15.6, 17.9/15.8 17.7/15.6, 17.9/15.8, 18.1/16 19/16.9, 19.2/17.1, 19.4/17.3 16.1/14, 16.2/14.1, 16.5/14.4 17.4/15.3, 17.5/15.4, 17.7/15.6
Length 1.3m (4'3") 1.3m (4'3") 2.0m (6'6") 1.3m (4'3") 2.0m (6'6")
Page 55 56 57 58 59
54
POWERWAVE
7760.02
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8 TILT: MET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,19,18,17,16@2,4,6,8,10 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >16 >16 <-153 <-160 67 7.1 1710-1880 17.7/15.6 1710-2170 1850-1990 17.7/15.6 Dual linear 45 50 <1.4:1 65 6.8 2 to 10 >19,19,18,17,16@2,4,6,8,10 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >16 >13 <-153 <-160 250 1000 >19,19,18,17,16@2,4,6,8,10 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >20 >10 <-153 <-160 63 6.2 1920-2170 17.9/15.8
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 1320x343x100 (4'4"x1'1"x3") Pre-mounted heavy duty brackets 19.5 (42.9) 14 (30.8) 1093 42 (93) 55 (123) DC grounded ASA Light Grey 1430x400x200 (4'8"x1'3"x7") 27.5 (60.6) 7010.00, 7011.00, 7012.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
1850 MHz
2140 MHz 55
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7760.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.7/15.6, 17.9/15.8, 18.1/16 TILT: MET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >22,20,18,16,14@0,2,4,6,8 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >16 >16 <-153 <-160 67 7.1 1710-1880 17.7/15.6 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 65 6.8 0 to 8 >22,20,18,16,14@0,2,4,6,8 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >16 >13 <-153 <-160 250 1000 >22,20,18,16,14@0,2,4,6,8 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >20 >10 <-153 <-160 64 6.2 1920-2170 18.1/16
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 1320x343x100 (4'4"x1'1"x3") Pre-mounted heavy duty brackets 19.5 (42.9) 14 (30.8) 1093 42 (93) 55 (123) DC grounded ASA Light Grey 1430x400x200 (4'8"x1'3"x7") 23.5 (51.8) 7010.00, 7011.00, 7012.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
1850 MHz
2140 MHz 56
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7765.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 19/16.9, 19.2/17.1, 19.4/17.3 TILT: MET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >22,20,18,16,15,14@0,1,2,3,4,5 >30 <2.0 >-22,typical>-18 <0.5 >28 >28 >16 >16 <-153 <-160 67 4.7 1710-1880 19/16.9 1710-2170 1850-1990 19.2/17.1 Dual linear 45 50 <1.4:1 65 4.4 0 to 5.5 >22,20,18,16,15,14@0,1,2,3,4,5 >30 <2.0 >-22,typical>-18 <0.5 >28 >28 >16 >13 <-153 <-160 250 1000 >22,20,18,16,15,14@0,1,2,3,4,5 >30 <2.0 >-22,typical>-18 <0.5 >28 >28 >20 >10 <-153 <-160 63 4.2 1920-2170 19.4/17.3
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 1934x343x100 (6'4"x11"x3") Pre-mounted heavy duty brackets 22.5 (49.6) 17 (37.4) 1602 42 (93) 55 (123) DC grounded ASA Light Grey 2085x430x250 (6'10"x1'3"x9") 27 (59.5) 7010.00, 7011.00, 7012.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
1850 MHz
2140 MHz 57
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7762.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.1/14, 16.2/14.1, 16.5/14.4 TILT: MET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >17,17,16,15,14@0,2,4,6,8 >30 <2.0 >-25,typical>-18 <0.5 >24 >23 >17 >7 <-153 <-160 89 7.0 1710-1880 16.1/14 1710-2170 1850-1990 16.2/14.1 Dual linear 45 50 <1.4:1 93 6.7 0 to 8 >17,17,16,15,14@0,2,4,6,8 >30 <2.0 >-25,typical>-18 <0.5 >25 >23 >17 >7 <-153 <-160 250 1000 >20,18,17,16,15@0,2,4,6,8 >30 <2.0 >-25,typical>-18 <0.5 >26 >23 >12 >7 <-153 <-160 90 6.3 1920-2170 16.5/14.4
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 1320x343x100 (4'4"x1'1"x3") Pre-mounted heavy duty brackets 23.5 (51.8) 18 (39.6) 1093 42 (93) 55 (123) DC grounded ASA Light Grey 1430x400x200 (4'8"x1'3"x7") 27.5 (60.6) 7010.00, 7011.00, 7012.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
1850 MHz
2140 MHz 58
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7766.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 17.4/15.3, 17.5/15.4, 17.7/15.6 TILT: MET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >22,20,18,16,15,14@0,1,2,3,4,5 >30 <2.0 >-25,typical>-18 <0.5 >27 >23 >16 >8 <-153 <-160 89 4.7 1710-1880 17.4/15.3 1710-2170 1850-1990 17.5/15.4 Dual linear 45 50 <1.4:1 93 4.4 0 to 5.5 >22,20,18,16,15,14@0,1,2,3,4,5 >30 <2.0 >-25,typical>-18 <0.5 >27 >23 >16 >8 <-153 <-160 250 1000 >22,20,18,16,15,14@0,1,2,3,4,5 >30 <2.0 >-25,typical>-18 <0.5 >27 >23 >16 >8 <-153 <-160 90 4.2 1920-2170 17.7/15.6
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 1934x343x100 (6'4"x11"x3") Pre-mounted heavy duty brackets 27.5 (60.6) 22 (48.5) 1602 42 (93) 55 (123) DC grounded ASA Light Grey 2085x430x250 (6'10"x1'3"x9") 32 (70.5) 7010.00, 7011.00, 7012.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
1850 MHz
2140 MHz 59
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
Gain dBi dBd 15.2/13.1, 18/15.9 15.2/13.1, 18/15.9 15.2/13.1, 18/15.9 15.2/13.1, 18/15.9 15.2/13.1, 18/15.9 16.2/14.1, 17.6/15.5 16.2/14.1, 17.6/15.5 16.2/14.1, 17.6/15.5 17.3/15.2, 17.8/15.7 17.3/15.2, 17.8/15.7 13.5/11.4, 15.5/13.4 15/12.9, 16/13.9 16/13.9, 16/13.9
Tilt MET MET MET MET MET MET MET MET MET MET MET MET MET
Length 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 2.0m (6'6") 2.0m (6'6") 2.0m (6'6") 2.6m (8'6") 2.6m (8'6") 1.4m (4'7") 2.0m (6'6") 2.6m (8'6")
Part Number 7750.00 7750.0S0.0000.00 7750.1ST.0000.00 7750.90 7755.90 7752.00 7752.0S0.0000.00 7752.90 7755.00 7755.0S0.0000.00 7770.00A 7772.00A 7775.00A
Page 61 62 63 64 65 66 67 68 69 70 71 72 73
60
POWERWAVE
7750.00
POLARIZATION: X-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.2/13.1, 18/15.9 TILT: MET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >27 >24 15 10 <0.33 <-153 300 600
2,4,6,8,10,12
1710-2170 880-960 15.2/13.1 1710-1880 17.5/15.4 1850-1990 17.7/15.6 Dual linear 45 50 <1.5:1 67 13.7 65 6.9 65 6.6 0 to 8
>18,18,16,15,14@ 2,4,6,8 >18,18,16,15,14@ 2,4,6,8
1900-2170 18/15.9
Dual linear 45
62 6.2
30 40
30 <2.0 <-25 0.3 >27 >24 20 >7 <0.62 <-153 <-160 250 600
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 1408x280x125mm (4'7"x11"x4") Pre-mounted heavy duty brackets 17.6 (39) 12.1 (27) 952 42 (93) 55 (123) DC grounded GRP 1550x355x255 (5'1"x1'2"x10") Light Grey 21.5 (47.3) 7020.00, 7031.00, 7032.00, 7033.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
1850 MHz
2140 MHz
61
POWERWAVE
7750.0S0.0000.00
POLARIZATION: X-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.2/13.1, 18/15.9 TILT: MET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >27 >24 15 10 <0.33 <-153 300 600
2,4,6,8,10,12
1710-2170 880-960 15.2/13.1 1710-1880 17.5/15.4 1850-1990 17.7/15.6 Dual linear 45 50 <1.5:1 67 13.7 65 6.9 65 6.6 0 to 8
>18,18,16,15,14@ 2,4,6,8 >18,18,16,15,14@ 2,4,6,8
1900-2170 18/15.9
Dual linear 45
62 6.2
30 40
30 <2.0 <-25 0.3 >27 >24 20 >7 <0.62 <-153 <-160 250 600
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 1408x280x125mm (4'7"x11"x4") No brackets 12.1 (27) 17.6 (39) 952 42 (93) 55 (123) DC grounded GRP 1550x355x255 (5'1"x1'2"x10") Light Grey 21.5 (47.3) 7020.00, 7031.00, 7032.00, 7033.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
1850 MHz
2140 MHz
62
POWERWAVE
7750.1ST.0000.00
POLARIZATION: X-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.2/13.1, 18/15.9 TILT: MET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >27 >24 15 10 <0.33 <-153 300 600
2,4,6,8,10,12
1710-2170 880-960 15.2/13.1 1710-1880 17.5/15.4 1850-1990 17.7/15.6 Dual linear 45 50 <1.5:1 67 13.7 65 6.9 65 6.6 4 to 12
>18,18,16,15,14@ 2,4,6,8 >18,18,16,15,14@ 2,4,6,8
1900-2170 18/15.9
Dual linear 45
62 6.2
30 40
30 <2.0 <-25 0.3 >27 >24 20 >7 <0.62 <-153 <-160 250 600
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 1408x280x125mm (4'7"x11"x4") No brackets 12.1 (27) 17.6 (39) 952 42 (93) 55 (123) DC grounded GRP 1550x355x255 (5'1"x1'2"x10") Light Grey 21.5 (47.3) 7020.00, 7031.00, 7032.00, 7033.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
1850 MHz
2140 MHz
63
POWERWAVE
7750.90
POLARIZATION: X-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.2/13.1, 18/15.9 TILT: MET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >27 >24 15 10 <0.33 <-153 300 600
2,4,6,8,10,12
1710-2170 880-960 15.2/13.1 1710-1880 17.5/15.4 1850-1990 17.7/15.6 Dual linear 45 50 <1.5:1 67 13.7 65 6.9 65 6.6 0 to 8
>18,18,16,15,14@ 2,4,6,8 >18,18,16,15,14@ 2,4,6,8
1900-2170 18/15.9
Dual linear 45
62 6.2
30 40
30 <2.0 <-25 0.3 >27 >24 20 >7 <0.62 <-153 <-160 250 600
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 1408x280x125mm (4'7"x11"x4") Pre-mounted heavy duty brackets 12.1 (27) 17.6 (39) 952 42 (93) 55 (123) DC grounded GRP 1550x355x255 (5'1"x1'2"x10") Light Grey 21.5 (47.3) 7020.00, 7031.00, 7032.00, 7033.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
1850 MHz
2140 MHz
64
POWERWAVE
7755.90
POLARIZATION: X-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.2/13.1, 18/15.9 TILT: MET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >27 >24 15 10 <0.33 <-153 300 600
2,4,6,8,10,12
1710-2170 880-960 15.2/13.1 1710-1880 17.5/15.4 1850-1990 17.7/15.6 Dual linear 45 50 <1.5:1 67 13.7 65 6.9 65 6.6 0 to 8
>18,18,16,15,14@ 2,4,6,8 >18,18,16,15,14@ 2,4,6,8
1900-2170 18/15.9
Dual linear 45
62 6.2
30 40
30 <2.0 <-25 0.3 >27 >24 20 >7 <0.62 <-153 <-160 250 600
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 1408x280x125mm (4'7"x11"x4") Pre-mounted heavy duty brackets 12.1 (27) 17.6 (39) 952 42 (93) 55 (123) DC grounded GRP 1550x355x255 (5'1"x1'2"x10") Light Grey 21.5 (47.3) 7020.00, 7031.00, 7032.00, 7033.10 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
1850 MHz
2140 MHz
65
POWERWAVE
7752.00
POLARIZATION: X-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.2/14.1, 17.6/15.5 TILT: MET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >27 >25 16 > 12 <0.26 <-153 300 600
>17,16,15,14@ 2,4,6,8
1710-2170 880-960 16.2/14.1 1710-1880 17.1/15 1850-1990 17.3/15.2 Dual linear 45 50 1.5:1 67 8.9 63 7.1 63 6.6 0 to 8
>18,18,17,16,16@ 2,4,6,8 >20,19,19,18,17@ 2,4,6,8
1900-2170 17.6/15.5
Dual linear 45
61 6.3
30 40
30 <2.0 <-25 0.5 >30 >25 16 > 6.5 <0.59 <-153 <-160 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 2033x280x125mm (6'8"x11"x4") Pre-mounted heavy duty brackets 19.8 (44) 16.0 (35) 1375 42 (93) 55 (123) DC grounded GRP 2175x355x255 (7'2"x14"x10") Light Grey 27 (59.5) 7020.00, 7031.00, 7032.00, 7033.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
1850 MHz
2140 MHz
66
POWERWAVE
7752.0S0.0000.00
POLARIZATION: X-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.2/14.1, 17.6/15.5 TILT: MET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >27 >25 16 > 12 <0.26 <-153 300 600
>17,16,15,14@ 2,4,6,8
1710-2170 880-960 16.2/14.1 1710-1880 17.1/15 1850-1990 17.3/15.2 Dual linear 45 50 1.5:1 67 8.9 63 7.1 63 6.6 0 to 8
>18,18,16,15,14@ 2,4,6,8 >20,19,19,18,17@ 2,4,6,8
1900-2170 17.6/15.5
Dual linear 45
61 6.3
30 40
30 <2.0 <-25 0.5 >30 >25 16 > 6.5 <0.59 <-153 <-160 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 2033x280x125mm (6'8"x11"x4") No brackets 16.0 (35) 19.8 (44) 1375 42 (93) 55 (123) DC grounded GRP 2175x355x255 (7'2"x14"x10") Light Grey 27 (59.5) 7020.00, 7031.00, 7032.00, 7033.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
1850 MHz
2140 MHz
67
POWERWAVE
7752.90
POLARIZATION: X-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.2/14.1, 17.6/15.5 TILT: MET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >27 >25 16 > 12 <0.26 <-153 300 600
>17,16,15,14@ 2,4,6,8
1710-2170 880-960 16.2/14.1 1710-1880 17.1/15 1850-1990 17.3/15.2 Dual linear 45 50 1.5:1 67 8.9 63 7.1 63 6.6 0 to 8
>18,18,16,15,14@ 2,4,6,8 >20,19,19,18,17@ 2,4,6,8
1900-2170 17.6/15.5
Dual linear 45
61 6.3
30 40
30 <2.0 <-25 0.5 >30 >25 16 > 6.5 <0.59 <-153 <-160 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 2033x280x125mm (6'8"x11"x4") Pre-mounted heavy duty brackets 16.0 (35) 19.8 (44) 1375 42 (93) 55 (123) DC grounded GRP 2175x355x255 (7'2"x14"x10") Light Grey 27 (59.5) 7020.00, 7031.00, 7032.00, 7033.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
1850 MHz
2140 MHz
68
POWERWAVE
7755.00
POLARIZATION: X-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.3/15.2, 17.8/15.7 TILT: MET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >30 >25 16 >11 <0.3 <-150 300 600
>18,18,17,16,16@ 2,4,6,8
1710-2170 880-960 17.3/15.2 1710-1880 17.3/15.2 1850-1990 17.6/15.5 Dual linear 45 50 1.5:1 67 7 65 6.9 65 6.4 0 to 8
>17,17,16,15,14@ 2,4,6,8 >17,17,16,15,14@ 2,4,6,8
1900-2170 17.8/15.7
Dual linear 45
62 6.1
30 38
30 <1 <-25 0.5 >30 >25 16 >7.2 <0.58 <-150 <-160 250 600
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 2658x280x125mm (8'8"x11"x4") Pre-mounted heavy duty brackets 25.1 (55) 19.6 (43) 1797 42 (93) 55 (123) DC grounded GRP 2800x355x255 (9'2"x1'2"x10") Light Grey 32.5 (71.6) 7020.00, 7031.00, 7032.00, 7033.10 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
1850 MHz
2140 MHz
69
POWERWAVE
7755.0S0.0000.00
POLARIZATION: X-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.3/15.2, 17.8/15.7 TILT: MET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >30 >25 16 >11 <0.3 <-150 300 600
>18,18,17,16,16@ 2,4,6,8
1710-2170 880-960 17.3/15.2 1710-1880 17.3/15.2 1850-1990 17.6/15.5 Dual linear 45 50 1.5:1 67 7 65 6.9 65 6.4 0 to 8
>17,17,16,15,14@ 2,4,6,8 >17,17,16,15,14@ 2,4,6,8
1900-2170 17.8/15.7
Dual linear 45
62 6.1
30 38
30 <1.0 <-25 0.5 >30 >25 16 >7.2 <0.58 <-150 <-160 250 600
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 2658x280x125mm (8'8"x11"x4") No brackets 19.6 (43) 25.1 (55) 1797 42 (93) 55 (123) DC grounded GRP 2800x355x255 (9'2"x1'2"x10") Light Grey 32.5 (71.6) 7020.00, 7031.00, 7032.00, 7033.10 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
1850 MHz
2140 MHz
70
POWERWAVE
7770.00A
PRELIMINARY
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <2.0 <-25 0.5 >25 >25 15 >10 <-153 300 600 30 40 <2.0 <-25 0.5 >25 >25 15 >10 <2.0 <-25 0.5 >25 >25 15 >10 90 15 0 to 10 >18,17,17x@0,5,10 >18,17,17x@0,5,10 30 >18,16,15x@0,4,8 30 824-896 13.5/11.4 50 <1.5:1 90 15 90 7 824-960 880-960 13.5/11.4 1710-1880 15.5/13.4
POLARIZATION: X-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.5/11.4, 15.5/13.4 TILT: MET LENGTH: 1.4m (4'7")
1710-2170 1850-1990 15.5/13.4 Dual linear 45 50 <1.5:1 90 7 0 to 8 >18,16,15x@0,4,8 30 40 <2.0 <-25 0.5 >25 >25 15 >10 <-153 <-160 250 600 <2.0 <-25 0.5 >25 >25 15 >10 >18,16,15x@0,4,8 30 90 9.5 1900-2170 15.5/13.4
Dual linear 45
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 1408x280x125mm Pre-mounted heavy duty brackets 17.6 (39) 12.1 (27) 952 42 (93) 55 (123) DC grounded GRP 1550x355x255 (61"x1'2"x10") Light Grey 21.5 (47.4) 7020.00, 7031.00, 7032.00, 7033.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visithttp://www.powerwave.com/rpa/.
71
POWERWAVE
7772.00A
PRELIMINARY
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <2.0 <-25 0.5 >25 >25 15 >10 <-153 300 600 30 40 <2.0 <-25 0.5 >25 >25 15 >10 <2.0 <-25 0.5 >25 >25 15 >10 90 9.5 0 to 7 >17,16,15x@0,4,8 >17,16,15x@0,4,8 30 >15,14,13x@0,4,8 30 824-896 15/12.9 50 <1.5:1 90 8.9 90 7 824-960 880-960 15/12.9 1710-1880 16/13.9
POLARIZATION: X-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15/12.9, 16/13.9 TILT: MET LENGTH: 2.0m (6'6")
1710-2170 1850-1990 16/13.9 Dual linear 45 50 <1.5:1 90 7 0 to 8 >15,14,13x@0,4,8 30 40 <2.0 <-25 0.5 >25 >25 15 >10 <-153 <-160 250 500 <2.0 <-25 0.5 >25 >25 15 >10 >15,14,13x@0,4,8 30 90 7 1900-2170 16/13.9
Dual linear 45
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 2033x280x125mm Pre-mounted heavy duty brackets 19.8 (44) 16.0 (35) 1375 42 (93) 55 (123) DC grounded GRP 2175x355x255 (7'2"x14"x10") Light Grey 27 (59.5) 7020.00, 7031.00, 7032.00, 7033.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visithttp://www.powerwave.com/rpa/.
72
POWERWAVE
7775.00A
PRELIMINARY
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <2.0 <-25 0.5 >25 >25 15 >10 <-150 300 600 30 40 <2.0 <-25 0.5 >25 >25 15 >10 <2.0 <-25 0.5 >25 >25 15 >10 90 7 0 to 6 >17,16,15x@0,3,6 >17,16,15x@0,3,6 30 >16,15,13x@0,4,8 30 824-896 16/13.9 50 <1.5:1 90 7 90 7 824-960 880-960 16/13.9 1710-1880 16/13.9
POLARIZATION: X-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16/13.9, 16/13.9 TILT: MET LENGTH: 2.6m (8'6")
1710-2170 1850-1990 16/13.9 Dual linear 45 50 <1.5:1 90 7 0 to 8 >16,15,13x@0,4,8 30 40 <2.0 <-25 0.5 >25 >25 15 >10 <-150 <-160 250 500 <2.0 <-25 0.5 >25 >25 15 >10 >16,15,13x@0,4,8 30 90 7 1900-2170 16/13.9
Dual linear 45
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 2658x280x125mm Pre-mounted heavy duty brackets 25.1 (55) 19.6 (43) 1797 42 (93) 55 (123) DC grounded GRP 2800x355x255 (9'2"x1'2"x10") Light Grey 32.5 (71.6) 7020.00, 7031.00, 7032.00, 7033.10 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visithttp://www.powerwave.com/rpa/.
73
POWERWAVE
Gain dBi dBd 14.7/12.6, 15.5/13.4, 15.5/13.4 16.2/14.1, 16.5/14.4, 16.5/14.4 17.3/15.2, 17.9/15.8, 17.9/15.8
Page 75 76 77
74
POWERWAVE
7780.00
POLARIZATION: X-Pol FREQUENCY (MHz): 824-896, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.7/12.6, 15.5/13.4, 15.5/13.4 TILT: MET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1 25 0.7 >27 >24 15 > 9.3 < 0.35 -153 300 600
>18,17,16,16@ 2,4,8,12
2x1710-2170 880-960 14.7/12.6 1710-1880 15/12.9 1850-1990 15.3/13.2 Dual linear 45 50 1.5:1 67 13.9 65 13.3 64 12.6 0 to 12
>17,16,15,14@ 0,4,8,12 >17,16,15,14@ 0,4,8,12
1900-2170 15.5/13.4
Dual linear 45
64 12
30 38
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
6 x 7/16 DIN Female Bottom 1408x280x125mm (4'7"x11"x4") Pre-mounted heavy duty brackets 19 (42) 13.5 (30) 952 42 (93) 55 (123) DC grounded GRP 1550x355x200 (5'1"x1'2"x7") Light Grey 23 (50.7) 7030.00, 7031.00, 7032.00, 7033.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
900 MHz
1800 MHz 75
2100 MHz
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7782.00
POLARIZATION: X-Pol FREQUENCY (MHz): 824-896, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: MET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 25 0.5 >28 >26 16 >11 <0.27 <-153 300 600
>18,17,16,16@ 2,5,7,9
2x1710-2170 880-960 16.2/14.1 1710-1880 15.3/13.8 1850-1990 16.1/14 Dual linear 45 50 1.5:1 67 8.6 65 10 65 9.4 0 to 11
>17,15,14@ 0,6,11 >17,16,15@ 0,6,11
1900-2170 16.5/14.4
Dual linear 45
63 8.7
>30 >34
>30 >34 <2 25 0.5 >28 >27 16 >6.3 <0.66 <-160 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
6 x 7/16 DIN Female Bottom 2033x280x125mm (6'8"x11"x4") Pre-mounted standard brackets 23.4 (48) 17.9 (39) 1375 42 (93) 55 (123) DC grounded GRP 2175x355x255 (7'2"x14"x10") RAL 7035 on all visible plastic part 28 (61.7) 7030.00, 7031.00, 7032.00, 7033.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
900 MHz
1800 MHz 76
2100 MHz
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
7785.00
POLARIZATION: X-Pol FREQUENCY (MHz): 824-896, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.3/15.2, 17.9/15.8, 17.9/15.8 TILT: MET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1 25 0.5 >28 >27 16 >12 <0.24 -153 300 600
>17,16,15,14@ 2,4,6,8
2x1710-2170 880-960 17.3/15.2 1710-1880 17.3/15.2 1850-1990 17.5/15.4 Dual linear 45 50 1.5:1 67 6.9 66 6.7 65 6.4 0 to 8
>17,16,15,14,13@ 0,2,4,6,8 >17,16,16,15,15@ 0,2,4,6,8
1900-2170 17.9/15.8
Dual linear 45
62 6.2
30 38
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
6 x 7/16 DIN Female Bottom 2658x280x125mm (8'8"x11"x4") Pre-mounted heavy duty brackets 27.7 (61) 22.2 (49) 1797 42 (93) 55 (123) DC grounded GRP 2800x355x255 (9'2"x1'2"x10") Light Grey 33 (72.7) 7030.00, 7031.00, 7032.00, 7033.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
900 MHz
1800 MHz 77
2100 MHz
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
The Powerwave single band antennas outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio), isolation beam squint and tracking. This design ensures minimized intermodulation products, thus substantially enhancing system benefits. The Powerwave polarization diversity systems uses one antenna with two orthogonal polarizations slanted at 45 to provide the independently fading signals needed for achieving topquality coverage. As a result of thorough, in-depth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance.
POWERWAVE
Page 176
79
POWERWAVE
Tilt FET
Page 81
80
POWERWAVE
7390.00B
POLARIZATION: X-Pol FREQUENCY (MHz): 806-896 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 10.5/8.4 TILT: FET LENGTH: 0.7m (2'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <-150 250 500 806-896 806-896 10.5/8.4 Linear slanted 50 <1.4:1 90 29 0 >13 30 <1 <2 >19 >17 >13
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 710x280x125 (2'4"x11"x5") Pre-mounted standard bracket 7.7 4 480 42 55 DC grounded GRP 850x355x200 (2'9"x1'2"x10") 6.5 (141) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
81
POWERWAVE
Gain dBi dBd 12.5/10.4 12.5/10.4 14.5/12.4 15.5/13.4 15/12.9 15/12.9 15/12.9 16.5/14.4 16.5/14.4 16.5/14.4 17.5/15.4 17.5/15.4 17.5/15.4 17.5/15.4 17/14.9 18/15.9 18/15.9 18/15.9 18/15.9
Tilt FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET
Length 0.7m (2'3") 0.7m (2'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.9m (6'2") 1.9m (6'2") 1.9m (6'2") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 1.9m (6'2") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6")
82
POWERWAVE
7216.03
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 12.5/10.4 TILT: FET LENGTH: 0.7m (2'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <-150 250 500 880-960 880-960 12.5/10.4 Linear slanted 45 50 <1.3:1 65 26 0 >10 >30 <1 <0.3 >24 >20 >20
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 660x256x50 (2'2"x10'x2") Pre-mounted standard bracket 7.3 (16) 3.6 (7.9) 408 42 55 (123) DC grounded PVC 770x308x121 (2'6"x1'x5') 7.5 (16.5) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
83
POWERWAVE
7282.03
POLARIZATION: X-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 12.5/10.4 TILT: FET LENGTH: 0.7m (2'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 824-896 824-896 12.5/10.4 Linear slanted 45 50 <1.3:1 65 25 4 >9 >30 <1 <0.3 >22 >18 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 660x256x50 (2'2"x10"x2") Pre-mounted standard bracket 7.7 (16.9) 4 (8.8) 408 42 55 (123) DC grounded PVC Light Gray 750x308x121 (2'6"x1'x5') 5 (11) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
84
POWERWAVE
7217.11
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.5/12.4 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 14.5/12.4 Linear slanted 45 50 <1.3:1 65 13 9 >14 >30 <1 <0.3 >23 >19 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 1320x256x50 (4'4"x10"x2") Pre-mounted standard bracket 8.5 (18.7) 4.8 (10.5) 816 42 55 (123) DC grounded PVC Light Gray 1430x308x121 (4'8"x1'x5") 10 (22) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
85
POWERWAVE
7217.04
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 15.5/13.4 Linear slanted 45 50 <1.3:1 65 13 0 >14 >30 <1 <0.3 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 1320x256x50 (4'4"x10"x2") Pre-mounted standard bracket 8.5 (18.7) 4.8 (10.5) 816 42 55 (123) DC grounded PVC Light Gray 1430x308x121 (4'8"x1'x5") 10 (22) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
86
POWERWAVE
7217.03
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15/12.9 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 15/12.9 Linear slanted 45 50 <1.3:1 65 13 7 >14 >30 <1 <0.3 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 1320x256x50 (4'4"x10"x2") Pre-mounted standard bracket 8.5 (18.7) 4.8 (10.5) 816 42 55 (123) DC grounded PVC Light Gray 1430x308x121 (4'8"x1'x5") 10 (22) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
87
POWERWAVE
7263.01
POLARIZATION: X-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15/12.9 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 824-896 824-896 15/12.9 Linear slanted 45 50 <1.4:1 65 13 0 >14 >30 <1 <0.3 >22 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 1320x256x50 (52"x10.4"x2") Pre-mounted standard bracket 7.5 (16.5) 7.5 (16.5) 816 42 55 (123) DC grounded PVC Light Gray 1430x308x121 (56"x12"x5") 8.5 (19) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
88
POWERWAVE
7263.04
POLARIZATION: X-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15/12.9 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 824-896 824-896 15/12.9 Linear slanted 45 50 <1.4:1 65 13 6 >14 >30 <1 <0.3 >22 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 1320x256x50 (52"x10.4"x2") Pre-mounted standard bracket 7.5 (16.5) 7.5 (16.5) 816 42 55 (123) DC grounded PVC Light Gray 1430x308x121 (56"x12"x5") 8.5 (19) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
89
POWERWAVE
7255.03
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.5/14.4 TILT: FET LENGTH: 1.9m (6'2")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 16.5/14.4 Linear slanted 45 50 <1.4:1 65 9 6 >15 >30 <1 <0.3 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 1940x256x50 (6'4"x10"x2") Pre-mounted standard bracket 14.2 (31.3) 10.5 (23.1) 1199 42 55 (123) DC grounded PVC Light Gray 2050x308x121 (6'9"x1'x5') 12 (26.5) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
90
POWERWAVE
7281.02
POLARIZATION: X-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.5/14.4 TILT: FET LENGTH: 1.9m (6'2")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 824-896 824-896 16.5/14.4 Linear slanted 45 50 <1.3:1 65 9 0 >15 >30 <1 <0.3 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 1940x256x50 (6'4"x10"x2") Pre-mounted heavy duty bracket 14.5 (31.9) 9 (19.8) 1199 42 55 (123) DC grounded PVC Light Gray 2050x308x121 (6'9"x1'x5') 10 (22) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
91
POWERWAVE
7281.04
POLARIZATION: X-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.5/14.4 TILT: FET LENGTH: 1.9m (6'2")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 824-896 824-896 16.5/14.4 Linear slanted 45 50 <1.3:1 65 9 6 >14 >30 <1 <0.3 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 1940x256x50 (6'4"x10"x2") Pre-mounted heavy duty bracket 14.5 (31.9) 9 (19.8) 1199 42 55 (123) DC grounded PVC Light Gray 2050x308x121 (6'9"x1'x5') 10 (22) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
92
POWERWAVE
7218.03
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.5/15.4 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 17.5/15.4 Linear slanted 45 50 <1.3:1 65 6.5 6 >17 >30 <1 <0.5 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 2580x256x50 (8'6"x10"x2") Pre-mounted standard bracket 20.2 (44.5) 14 (30.8) 1595 42 55 (123) DC grounded PVC Light Gray 2690x308x121 (8'10"x1'x5') 18 (39.7) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
93
POWERWAVE
7218.04
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.5/15.4 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 17.5/15.4 Linear slanted 45 50 <1.3:1 65 6.5 4 >17 >30 <1 <0.5 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 2580x256x50 (8'6"x10"x2") Pre-mounted standard bracket 20.2 (44.5) 14 (30.8) 1595 42 55 (123) DC grounded PVC Light Gray 2690x308x121 (8'10"x1'x5') 18 (39.7) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
94
POWERWAVE
7218.13
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.5/15.4 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 17.5/15.4 Linear slanted 45 50 <1.3:1 65 6.5 6 >18 >30 <1 <0.5 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 2580x256x50 (8'6"x10"x2") Pre-mounted heavy duty bracket 22.3 (49.1) 16.8 (37) 1595 42 55 (123) DC grounded PVC Light Gray 2690x308x121 (8'10"x1'x5') 18 (39.7) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
95
POWERWAVE
7218.14
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.5/15.4 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 17.5/15.4 Linear slanted 45 50 <1.3:1 65 6.5 4 >18 >30 <1 <0.5 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 2580x256x50 (8'6"x10"x2") Pre-mounted heavy duty bracket 22.3 (49.1) 16.8 (37) 1595 42 55 (123) DC grounded PVC Light Gray 2690x308x121 (8'10"x1'x5') 18 (39.7) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
96
POWERWAVE
7255.04
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17/14.9 TILT: FET LENGTH: 1.9m (6'2")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 17/14.9 Linear slanted 45 50 <1.4:1 65 9 0 >17 >30 <1 <0.3 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 1940x256x50 (6'4"x10"x2") Pre-mounted standard bracket 14.2 (31.3) 10.5 (23.1) 1199 42 55 (123) DC grounded PVC Light Gray 2050x308x121 (6'9"x1'x5') 12 (26.5) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
97
POWERWAVE
7218.05
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 18/15.9 Linear slanted 45 50 <1.3:1 65 6.5 0 >18 >30 <1 <0.3 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 2580x256x50 (8'6"x10"x2") Pre-mounted standard bracket 20.2 (44.5) 14 (30.8) 1595 42 55 (123) DC grounded PVC Light Gray 2690x308x121 (8'10"x1'x5') 18 (39.7) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
98
POWERWAVE
7218.09
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 18/15.9 Linear slanted 45 50 <1.3:1 65 6.5 2 >18 >30 <1 <0.3 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 2580x256x50 (8'6"x10"x2") Pre-mounted standard bracket 20.2 (44.5) 14 (30.8) 1595 42 55 (123) DC grounded PVC Light Gray 2690x308x121 (8'10"x1'x5') 18 (39.7) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
99
POWERWAVE
7218.15
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 18/15.9 Linear slanted 45 50 <1.3:1 65 6.5 0 >18 >30 <1 <0.3 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 2580x256x50 (8'6"x10"x2") Pre-mounted heavy duty bracket 22.3 (49.1) 16.8 (37) 1595 42 55 (123) DC grounded PVC Light Gray 2690x308x121 (8'10"x1'x5') 18 (39.7) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
100
POWERWAVE
7218.19
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 18/15.9 Linear slanted 45 50 <1.3:1 65 6.5 2 >18 >30 <1 <0.4 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN female Bottom 2580x256x50 (8'6"x10"x2") Pre-mounted heavy duty bracket 22.3 (49.1) 16.8 (37) 1595 42 55 (123) DC grounded PVC Light Gray 2690x308x121 (8'10"x1'x5') 18 (39.7) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
101
POWERWAVE
102
POWERWAVE
7143.24.33.50B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896 HORIZONTAL BEAM WIDTH (): 60 GAIN (dBi/dBd): 15/12.9 TILT: MET LENGTH: 1.2m (3'11")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 806-896 806-896 15/12.9 Linear vertical 50 <1.5:1 60 16 0-17 >17 25 0.5 >25 <-146 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1200x300x130 (3'11"x1'x5") Pre-mounted heavy duty bracket 13.1 (28) 7.6 (16) 869 42 55 DC grounded PVC Light Gray 1320x350x210 (4'4"x1' 2"x8") 14 (31) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
103
POWERWAVE
7144.24.33.50B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.5/11.4 TILT: MET LENGTH: 1.2m (3'11")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 806-896 806-896 13.5/11.4 Linear vertical 50 <1.5:1 90 17 0-17 >17 25 0.5 >24 <-146 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1200x300x130 (3'11"x1'x5") Pre-mounted heavy duty bracket 13.4 (29) 7.9 (17) 869 42 55 DC grounded PVC Light Gray 1320x350x210 (4'4"x2"x8") 14 (31) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
104
POWERWAVE
7145.24.33.50B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896 HORIZONTAL BEAM WIDTH (): 105 GAIN (dBi/dBd): 12.6/10.5 TILT: MET LENGTH: 1.2m (3'11")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 806-896 806-896 12.6/10.5 Linear vertical 50 <1.5:1 105 18 0-17 >17 typical 25 0.5 >21 <-146 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1200x300x130 (3'11"x1'x5") Pre-mounted standard bracket 12.3 (27) 8.6 (18) 869 42 55 DC grounded PVC Light Gray 1320x350x210 (4'4"x1' 2"x8") 14 (31) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
105
POWERWAVE
Gain dBi dBd 20/17.9 20/17.9 23/20.9 23/20.9 17/14.9 17/14.9 18/15.9 18/15.9 18/15.9 18/15.9 20/17.9 20/17.9 20/17.9 16.5/14.4 16.5/14.4 16.5/14.4 18/15.9 18/15.9 18/15.9 18/15.9 18/15.9 19.5/17.4 19.5/17.4
Tilt FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET
Length 1.1m (3'7") 1.1m (3'7") 1.9m (6'2") 1.9m (6'2") 1m (3'3") 1m (3'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.8m (5'10") 1.8m (5'10") 1.8m (5'10") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.8m (5'10") 1.8m (5'10") 1.8m (5'10") 1.8m (5'10") 1.8m (5'10") 2.6m (8'6") 2.6m (8'6")
Page 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129
106
POWERWAVE
7185.40
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 30 GAIN (dBi/dBd): 20/17.9 TILT: FET LENGTH: 1.1m (3'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 20/17.9 Linear vertical 50 <1.3:1 30 8.5 0 >18 >-18 0.5 >17 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1064x342x239 (3'5"x1'1"x9") Pre-mounted heavy duty bracket 12.9 (28.4) 7.4 (16.3) 879 42 55 DC grounded PVC Light Gray 1500x405x260 (4'11"x16"x10") 13.8 (30.4) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
107
POWERWAVE
7185.42
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 30 GAIN (dBi/dBd): 20/17.9 TILT: FET LENGTH: 1.1m (3'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 20/17.9 Linear vertical 50 <1.3:1 30 8.5 2 >18 >-18 0.5 >17 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1064x342x239 (3'5"x1'1"x9") Pre-mounted heavy duty bracket 12.9 (28.4) 7.4 (16.3) 879 42 55 DC grounded PVC Light Gray 1500x405x260 (4'11"x16"x10") 13.8 (30.4) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
108
POWERWAVE
7221.40
POLARIZATION: V-Pol FREQUENCY (MHz): 1880-1990 HORIZONTAL BEAM WIDTH (): 30 GAIN (dBi/dBd): 23/20.9 TILT: FET LENGTH: 1.9m (6'2")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1880-1990 1850-1990 23/20.9 Linear vertical 50 <1.3:1 30 5 0 >20 >-18 0.5 >32 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1918x342x239 (6'3"x1'1"x9") Pre-mounted heavy duty bracket 18.3 (40.3) 12.8 (28.2) 1584 42 55 DC grounded PVC Light Gray 2007x467x330 (6' 7"x1' 6"x1'1") 20.5 (45.1) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
109
POWERWAVE
7221.44
POLARIZATION: V-Pol FREQUENCY (MHz): 1880-1990 HORIZONTAL BEAM WIDTH (): 30 GAIN (dBi/dBd): 23/20.9 TILT: FET LENGTH: 1.9m (6'2")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1880-1990 1850-1990 23/20.9 Linear vertical 50 <1.3:1 30 4 4 >20 >-18 0.5 >32 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1918x342x239 (6'3"x1'1"x9") Pre-mounted heavy duty bracket 18.3 (40.3) 12.8 (28.2) 1584 42 55 DC grounded PVC Light Gray 2007x467x330 (6' 7"x1' 6"x1'1") 20.5 (45.1) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
110
POWERWAVE
7183.42
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17/14.9 TILT: FET LENGTH: 1m (3'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 17/14.9 Linear vertical 50 <1.3:1 65 9 2 >18 >-18 0.5 >28 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1000x126x80 (3'3"x5"x3") Pre-mounted standard bracket 7.3 (16) 3.6 (7.9) 304 42 55 DC grounded PVC Light Gray 1110x190x140 (3' 8"x7"x6") 4.4 (10) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
111
POWERWAVE
7183.46
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17/14.9 TILT: FET LENGTH: 1m (3'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 17/14.9 Linear vertical 50 <1.3:1 65 9 6 >18 >-18 0.5 >28 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1000x126x80 (3'3"x5"x3") Pre-mounted standard bracket 7.3 (16) 3.6 (7.9) 304 42 55 DC grounded PVC Light Gray 1110x190x140 (3' 8"x7"x6") 4.4 (10) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
112
POWERWAVE
7182.40
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 18/15.9 Linear vertical 50 <1.3:1 65 6.5 0 >18 >-18 0.5 >30 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1300x126x80 (4' 3"x5"x3" ) Pre-mounted standard bracket 8.8 (19.4) 5.1 (11.2) 396 42 55 DC grounded PVC Light Gray 1410x190x140 (4' 7"x7"x6") 9.2 (20.3) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
113
POWERWAVE
7182.42
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 18/15.9 Linear vertical 50 <1.3:1 65 6.5 2 >18 >-18 0.5 >30 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1300x126x80 (4' 3"x5"x3" ) Pre-mounted standard bracket 8.8 (19.4) 5.1 (11.2) 396 42 55 DC grounded PVC Light Gray 1410x190x140 (4' 7"x7"x6") 9.2 (20.3) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
114
POWERWAVE
7182.44
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 18/15.9 Linear vertical 50 <1.3:1 65 6.5 4 >18 >-18 0.5 >30 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1300x126x80 (4' 3"x5"x3" ) Pre-mounted standard bracket 8.8 (19.4) 5.1 (11.2) 396 42 55 DC grounded PVC Light Gray 1410x190x140 (4' 7"x7"x6") 9.2 (20.3) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
115
POWERWAVE
7182.46
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 18/15.9 Linear vertical 50 <1.3:1 65 6.5 6 >18 >-18 0.5 >30 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1300x126x80 (4' 3"x5"x3" ) Pre-mounted standard bracket 8.8 (19.4) 5.1 (11.2) 396 42 55 DC grounded PVC Light Gray 1410x190x140 (4' 7"x7"x6") 9.2 (20.3) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
116
POWERWAVE
7220.40
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 20/17.9 TILT: FET LENGTH: 1.8m (5'10")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 20/17.9 Linear vertical 50 <1.3:1 65 5 0 >20 >-18 0.5 >30 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1840x126x84 (6'x5"x3") Pre-mounted heavy duty bracket 12.9 (28.4) 7.4 (16.3) 560 42 55 DC grounded PVC Light Gray 2010x190x140 (6' 7"x7"x6") 14.8 (32.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
117
POWERWAVE
7220.42
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 20/17.9 TILT: FET LENGTH: 1.8m (5'10")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 20/17.9 Linear vertical 50 <1.3:1 65 5 2 >20 >-18 0.5 >30 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1840x126x84 (6'x5"x3") Pre-mounted heavy duty bracket 12.9 (28.4) 7.4 (16.3) 560 42 55 DC grounded PVC Light Gray 2010x190x140 (6' 7"x7"x6") 14.8 (32.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
118
POWERWAVE
7220.44
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 20/17.9 TILT: FET LENGTH: 1.8m (5'10")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 20/17.9 Linear vertical 50 <1.3:1 65 4 4 >20 >-18 0.5 >30 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1840x126x84 (6'x5"x3") Pre-mounted heavy duty bracket 12.9 (28.4) 7.4 (16.3) 560 42 55 DC grounded PVC Light Gray 2010x190x140 (6' 7"x7"x6") 14.8 (32.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
119
POWERWAVE
7184.40
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.5/14.4 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 16.5/14.4 Linear vertical 50 <1.3:1 90 6.5 0 >18 >-18 0.5 >27 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1300x126x80 (4' 3"x5"x3" ) Pre-mounted standard bracket 8.8 (19.4) 5.1 (11.2) 396 42 55 DC grounded PVC Light Gray 1410x190x140 (4' 7"x7"x6") 9.7 (21.1) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
120
POWERWAVE
7184.42
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.5/14.4 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 16.5/14.4 Linear vertical 50 <1.3:1 90 6.5 2 >18 >-18 0.5 >27 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1300x126x80 (4' 3"x5"x3" ) Pre-mounted standard bracket 8.8 (19.4) 5.1 (11.2) 396 42 55 DC grounded PVC Light Gray 1410x190x140 (4' 7"x7"x6") 9.7 (21.1) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
121
POWERWAVE
7184.44
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.5/14.4 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 16.5/14.4 Linear vertical 50 <1.3:1 90 6.5 4 >18 >-18 0.5 >27 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1300x126x80 (4' 3"x5"x3" ) Pre-mounted standard bracket 8.8 (19.4) 5.1 (11.2) 396 42 55 DC grounded PVC Light Gray 1410x190x140 (4' 7"x7"x6") 9.7 (21.1) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
122
POWERWAVE
7200.40
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 1.8m (5'10")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 18/15.9 Linear vertical 50 <1.3:1 90 5 0 >18 >-18 0.5 >27 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1840x126x84 (6'x5"x3") Pre-mounted heavy duty bracket 12.8 (28.2) 7.3 (16) 560 42 55 DC grounded PVC Light Gray 2010x190x140 (6' 7"x7"x6") 14.8 (32.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
123
POWERWAVE
7200.42
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 1.8m (5'10")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 18/15.9 Linear vertical 50 <1.3:1 90 5 2 >18 >-18 0.5 >27 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1840x126x84 (6'x5"x3") Pre-mounted heavy duty bracket 12.8 (28.2) 7.3 (16) 560 42 55 DC grounded PVC Light Gray 2010x190x140 (6' 7"x7"x6") 14.8 (32.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
124
POWERWAVE
7200.43
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 1.8m (5'10")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 18/15.9 Linear vertical 50 <1.3:1 90 5 3 >18 >-18 0.5 >27 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1840x126x84 (6'x5"x3") Pre-mounted heavy duty bracket 12.8 (28.2) 7.3 (16) 560 42 55 DC grounded PVC Light Gray 2010x190x140 (6' 7"x7"x6") 14.8 (32.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
125
POWERWAVE
7200.44
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 1.8m (5'10")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 18/15.9 Linear vertical 50 <1.3:1 90 5 4 >18 >-18 0.5 >27 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1840x126x84 (6'x5"x3") Pre-mounted heavy duty bracket 12.8 (28.2) 7.3 (16) 560 42 55 DC grounded PVC Light Gray 2010x190x140 (6' 7"x7"x6") 14.8 (32.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
126
POWERWAVE
7200.46
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 1.8m (5'10")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 18/15.9 Linear vertical 50 <1.3:1 90 5 6 >18 >-18 0.5 >27 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1840x126x84 (6'x5"x3") Pre-mounted heavy duty bracket 12.8 (28.2) 7.3 (16) 560 42 55 DC grounded PVC Light Gray 2010x190x140 (6' 7"x7"x6") 14.8 (32.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
127
POWERWAVE
7199.40
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 19.5/17.4 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 19.5/17.4 Linear vertical 50 <1.3:1 90 3.2 0 >17 >-18 0.5 >26 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 2600x126x80 (102.4x5x3.1) Pre-mounted heavy duty bracket 15 (33) 9.5 (20.9) 791 42 55 DC grounded PVC Light Gray 2710x215x155 (106.7x8.5x6) 16.3 (35.9) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
128
POWERWAVE
7199.42
POLARIZATION: V-Pol FREQUENCY (MHz): 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 19.5/17.4 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1850-1990 1850-1990 19.5/17.4 Linear vertical 50 <1.3:1 90 3.2 2 >17 >-18 0.5 >26 <-146 400
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 2600x126x80 (102.4x5x3.1) Pre-mounted heavy duty bracket 15 (33) 9.5 (20.9) 791 42 55 DC grounded PVC Light Gray 2710x215x155 (106.7x8.5x6) 16.3 (35.9) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
129
POWERWAVE
Gain dBi dBd 11/8.9 11/8.9 11/8.9 11/8.9 11/8.9 11/8.9 11/8.9
Length 3.14m (10'4") 3.14m (10'4") 3m (910") 3m (910") 3m (910") 3m (910") 3m (910")
130
POWERWAVE
4168.21.33.00
POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi/dBd): 11/8.9 TILT: FET LENGTH: 3.14m (10'4")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 824-896 824-896 11/8.9 Linear vertical 50 <1.4:1 360 6.5 0 12 0.5 <-146 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 3140x78 (10'4"x3") Pre-mounted bracket 12.5 (27.5) 11 (24.2) 433 42 55 DC grounded PVC Light Gray 3300x150x170 (10'10"x6"x7") 16 (35.2) included
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
131
POWERWAVE
4168.21.33.03
POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi/dBd): 11/8.9 TILT: FET LENGTH: 3.14m (10'4")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 824-896 824-896 11/8.9 Linear vertical 50 <1.4:1 360 6.5 3 12 0.5 <-146 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 3140x78 (10'4"x3") Pre-mounted bracket 12.5 (27.5) 11 (24.2) 433 42 55 DC grounded PVC Light Gray 3300x150x170 (10'10"x6"x7") 16 (35.2) included
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
132
POWERWAVE
4168.11.33.00
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi/dBd): 11/8.9 TILT: FET LENGTH: 3m (910")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 11/8.9 Linear vertical 50 <1.4:1 360 6.5 0 12 0.5 <-146 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 3000x78 (910"x3") Pre-mounted bracket 12.5 (27.5) 11 (24.2) 413 42 55 DC grounded PVC Light Gray 3300x150x170 (10'10"x6"x7") 16 (35.2) included
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
133
POWERWAVE
4168.11.33.02
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi/dBd): 11/8.9 TILT: FET LENGTH: 3m (910")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 11/8.9 Linear vertical 50 <1.4:1 360 6.5 2 12 0.5 <-146 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 3000x78 (910"x3") Pre-mounted bracket 12.5 (27.5) 11 (24.2) 413 42 55 DC grounded PVC Light Gray 3300x150x170 (10'10"x6"x7") 16 (35.2) included
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
134
POWERWAVE
4168.11.33.03
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi/dBd): 11/8.9 TILT: FET LENGTH: 3m (910")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 11/8.9 Linear vertical 50 <1.4:1 360 6.5 3 12 0.5 <-146 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 3000x78 (910"x3") Pre-mounted bracket 12.5 (27.5) 11 (24.2) 413 42 55 DC grounded PVC Light Gray 3300x150x170 (10'10"x6"x7") 16 (35.2) included
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
135
POWERWAVE
4168.11.33.06
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi/dBd): 11/8.9 TILT: FET LENGTH: 3m (910")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 11/8.9 Linear vertical 50 <1.4:1 360 6.5 6 12 0.5 <-146 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 3000x78 (910"x3") Pre-mounted bracket 12.5 (27.5) 11 (24.2) 413 42 55 DC grounded PVC Light Gray 3300x150x170 (10'10"x6"x7") 16 (35.2) included
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
136
POWERWAVE
4168.11.33.52
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi/dBd): 11/8.9 TILT: FET LENGTH: 3m (910")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 11/8.9 Linear vertical 50 <1.4:1 360 6.5 2 uptilt 12 0.5 <-146 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 3000x78 (910"x3") Pre-mounted bracket 12.5 (27.5) 11 (24.2) 413 42 55 DC grounded PVC Light Gray 3300x150x170 (10'10"x6"x7") 16 (35.2) included
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
137
POWERWAVE
Gain dBi dBd 12.5/10.4 13/10.9 15.5/13.4 15.5/13.4 15.5/13.4 15/12.9 17.5/15.4 17/14.9 17/14.9 18/15.9 18/15.9 18/15.9 18/15.9 18/15.9 12/9.9 14/11.9 14/11.9 15/12.9 15/12.9 16.5/14.4 16.5/14.4 16.5/14.4
Tilt FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET
Length 0.7m (2'3") 0.7m (2'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 2.6m (8'6") 1.9m (6'2") 2m (6'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 0.7m (2'3") 1.3m (4'3") 1.3m (4'3") 1.9m (6'2") 1.9m (6'2") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6")
Page 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160
138
POWERWAVE
7270.02
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 12.5/10.4 TILT: FET LENGTH: 0.7m (2'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 824-896 12.5/10.4 Linear vertical 50 <1.3:1 65 28 0 >10 >-20 0.5 >24 <-150 300
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 660x256x50 (22x10x2) Pre-mounted standard bracket 7.7 (16.9) 4 (8.8) 408 42 55 DC grounded PVC Light Gray 770x308x121 (26x1x5) 8.3 (18.2) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7225.04
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 13/10.9 TILT: FET LENGTH: 0.7m (2'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 13/10.9 Linear vertical 50 <1.3:1 65 26 0 >9 >-20 0.5 >25 <-150 300
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 660x256x50 (22x10x2) Pre-mounted standard bracket 8.7 (19.1) 5 (11) 408 42 55 DC grounded PVC Light Gray 770x308x121 (26x1x5) 6 (13.2) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7226.03
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 15.5/13.4 Linear vertical 50 <1.3:1 65 24 6 >17 >-20 0.5 >25 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1320x256x50 (44x10x2) Pre-mounted standard bracket 10.7 (23.5) 7 (15.4) 816 42 55 DC grounded PVC Light Gray 1430x308x121 (48x1x5) 8.5 (18) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7226.04
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 15.5/13.4 Linear vertical 50 <1.3:1 65 14 0 >17 >-20 0.5 >23 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1320x256x50 (44x10x2) Pre-mounted standard bracket 10.7 (23.5) 7 (15.4) 816 42 55 DC grounded PVC Light Gray 1430x308x121 (48x1x5) 8.5 (18) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7271.02
POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 824-896 824-896 15.5/13.4 Linear vertical 50 <1.3:1 65 14 0 >17 >-20 0.5 >24 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1320x256x50 (4'4"x10"x2 ) Pre-mounted standard bracket 10.7 (23.5) 7 (15.4) 816 42 55 DC grounded PVC Light Gray 1430x308x121 (4'8"x1'x5) 8.5 (18.7) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7271.03
POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15/12.9 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 824-896 824-896 15/12.9 Linear vertical 50 <1.4:1 65 14 5 >15 >-20 0.5 >24 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1320x256x50 (4'4"x10"x2 ) Pre-mounted standard bracket 10.7 (23.5) 7 (15.4) 816 42 55 DC grounded PVC Light Gray 1430x308x121 (4'8"x1'x5) 8.5 (18.7) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7273.03
POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.5/15.4 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 824-896 824-896 17.5/15.4 Linear vertical 50 <1.3:1 65 7 4 >17 >-20 0.5 >22 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 17.7 (39) 14 (30.8) 1595 42 55 DC grounded PVC Light Gray 2650x308x121 (88x1x5) 18.8 (41.4) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7227.04
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17/14.9 TILT: FET LENGTH: 1.9m (6'2")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 17/14.9 Linear vertical 50 <1.3:1 65 9 0 >17 >-13 0.5 >23 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1940x256x50 (64x10x2) Pre-mounted standard bracket 14.1 (31) 10.4 (22.9) 1199 42 55 DC grounded PVC Light Gray 2050x308x121 (69x1x5) 13 (29) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7272.02
POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17/14.9 TILT: FET LENGTH: 2m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 824-896 824-896 17/14.9 Linear vertical 50 <1.4:1 65 9.5 0 >18 >-20 0.5 >24 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1940x256x50 (6'4"x10"x2") Pre-mounted standard bracket 14.7 (32.4) 11 (24.2) 816 42 55 DC grounded PVC Light Gray 2050x308x121 (4'8"x1'x5) 14.8 (32.6) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7228.03
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 18/15.9 Linear vertical 50 <1.3:1 65 6.5 0 >19 >-20 0.5 >23 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 16.5 (36.3) 10.3 (22.7) 1595 42 55 DC grounded PVC Light Gray 2690x308x121 (810x1x5) 17 (379) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7228.04
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 18/15.9 Linear vertical 50 <1.3:1 65 6.5 0 >19 >-20 0.5 >23 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 16.5 (36.3) 10.3 (22.7) 1595 42 55 DC grounded PVC Light Gray 2690x308x121 (810x1x5) 17 (379) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7228.06
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 18/15.9 Linear vertical 50 <1.3:1 65 6.5 6 >17 >-20 0.5 >25 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 16.5 (36.3) 10.3 (22.7) 1595 42 55 DC grounded PVC Light Gray 2690x308x121 (810x1x5) 17 (379) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7228.08
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 18/15.9 Linear vertical 50 <1.3:1 65 6.5 2 >17 >-20 0.5 >25 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 16.5 (36.3) 10.3 (22.7) 1595 42 55 DC grounded PVC Light Gray 2690x308x121 (810x1x5) 17 (379) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7273.02
POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 824-896 824-896 18/15.9 Linear vertical 50 <1.3:1 65 7 0 >18 >-20 0.5 >24 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 17.7 (39) 14 (30.8) 1595 42 55 DC grounded PVC Light Gray 2650x308x121 (88x1x5) 18.8 (41.4) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7230.04
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 12/9.9 TILT: FET LENGTH: 0.7m (2'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 12/9.9 Linear vertical 50 <1.3:1 90 27 20 >12 >-20 0.5 >20 <-150 300
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 695x160x55 (23x6x2) Pre-mounted standard bracket 7 (15.4) 3.3 (7.2) 269 42 55 DC grounded PVC Light Gray 805x216x156 (28x9x6) 7.5 (16.5) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7231.04
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 14/11.9 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 14/11.9 Linear vertical 50 <1.3:1 90 14 0 >15 >-20 0.5 >20 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1320x160x55 (44x6x2) Pre-mounted standard bracket 9.7 (21.3) 6 (13.2) 510 42 55 DC grounded PVC Light Gray 1430x216x156 (48x9x6) 11 (24.2) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7231.06
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 14/11.9 TILT: FET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 14/11.9 Linear vertical 50 <1.3:1 90 14 6 >17 >-20 0.5 >20 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1320x160x55 (44x6x2) Pre-mounted standard bracket 9.7 (21.3) 6 (13.2) 510 42 55 DC grounded PVC Light Gray 1430x216x156 (48x9x6) 11 (24.2) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7232.04
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15/12.9 TILT: FET LENGTH: 1.9m (6'2")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 15/12.9 Linear vertical 50 <1.3:1 90 9 0 >15 >-20 0.5 >20 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1940x160x55 (64x6x2) Pre-mounted standard bracket 13.7 (30.2) 10 (22) 750 42 55 DC grounded PVC Light Gray 2050x216x156 (69x9x6) 15 (33) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7232.07
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15/12.9 TILT: FET LENGTH: 1.9m (6'2")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 15/12.9 Linear vertical 50 <1.3:1 90 9 4 >15 >-15 0.5 >20 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 1940x160x55 (64x6x2) Pre-mounted standard bracket 13.7 (30.2) 10 (22) 750 42 55 DC grounded PVC Light Gray 2050x216x156 (69x9x6) 15 (33) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7233.04
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.5/14.4 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 16.5/14.4 Linear vertical 50 <1.3:1 90 6.5 0 >17 >-20 0.5 >20 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 2580x160x55 (86x6x2) Pre-mounted standard bracket 13.8 (30.4) 8.3 (18.2) 997 42 55 DC grounded PVC Light Gray 2690x216x156 (810x9x6) 15 (33) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7233.06
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.5/14.4 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 16.5/14.4 Linear vertical 50 <1.3:1 90 6.5 6 >17 >-20 0.5 >20 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 2580x160x55 (86x6x2) Pre-mounted standard bracket 13.8 (30.4) 8.3 (18.2) 997 42 55 DC grounded PVC Light Gray 2690x216x156 (810x9x6) 15 (33) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
7233.08
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.5/14.4 TILT: FET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 16.5/14.4 Linear vertical 50 <1.3:1 90 6.5 2 >17 >-20 0.5 >20 <-150 500
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN female Bottom 2580x160x55 (86x6x2) Pre-mounted standard bracket 13.8 (30.4) 8.3 (18.2) 997 42 55 DC grounded PVC Light Gray 2690x216x156 (810x9x6) 15 (33) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
POWERWAVE
Gain dBi dBd 15.5/13.4, 15.0/12.9 15.5/13.4, 15.0/12.9 15.5/13.4, 17.5/15.4 15.5/13.4, 17.5/15.4 15.5/13.4, 17.5/15.4 15.5/13.4, 17.5/15.4 16.5/14.4, 16.0/13.9 16.5/14.4, 16.0/13.9 16.5/14.4, 16.0/13.9 16.5/14.4, 16.0/13.9
Tilt FET FET FET FET FET FET FET FET FET FET
Length 1.5m (4'11") 1.5m (4'11") 1.5m (4'11") 1.5m (4'11") 1.5m (4'11") 1.5m (4'11") 2.0m (6'6") 2.0m (6'6") 2.0m (6'6") 2.0m (6'6")
Page 162 163 164 165 166 167 168 169 170 171
161
POWERWAVE
7329.00B
POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4, 15.0/12.9 TILT: FET LENGTH: 1.5m (4'11")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 65 13 0 >13 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >12 >-150 300 600 870-960 870-960 15.5/13.4 Dual linear slanted 50 <1.5:1 65 13 0 >15 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >12 >-150 300 600 1710-1880 1710-1880 15/12.9
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1450x280x125 (49x11x5) Pre-mounted heavy duty brackets 12.6 (27.7) 7.1 (15.6) 981 42 (93) 55 (123) DC grounded GRP Light gray 1620x355x255 (54x12x10) 15.3 (13.7) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
POWERWAVE
7329.06B
POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4, 15.0/12.9 TILT: FET LENGTH: 1.5m (4'11")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 65 13 6 >8 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >11 >-150 300 600 870-960 870-960 15.5/13.4 Dual linear slanted 50 <1.5:1 65 13 6 >13 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >9 >-150 300 600 1710-1880 1710-1880 14.5/12.4
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1450x280x125 (49x11x5) Pre-mounted heavy duty brackets 12.6 (27.7) 7.1 (15.6) 981 42 (93) 55 (123) DC grounded GRP Light gray 1620x355x255 (54x12x10) 15.3 (13.7) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
POWERWAVE
7330.00B
POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4, 17.5/15.4 TILT: FET LENGTH: 1.5m (4'11")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 67 13.4 0 >16 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >12 >-150 300 600 870-960 870-960 15.5/13.4 Dual linear slanted 50 <1.5:1 66 7 0 >16 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >13 >-150 300 600 1710-1880 1710-1880 17.5/15.4
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1450x280x125 (49x11x5) Pre-mounted heavy duty brackets 12.6 (27.7) 7.1 (15.6) 981 42 (93) 55 (123) DC grounded GRP Light gray 1620x355x255 (54x12x10) 15.3 (13.7) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
POWERWAVE
7330.02B
POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4, 17.5/15.4 TILT: FET LENGTH: 1.5m (4'11")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 67 13.4 2 >16 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >12 >-150 300 600 870-960 870-960 15.5/13.4 Dual linear slanted 50 <1.5:1 66 7 2 >16 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >13 >-150 300 600 1710-1880 1710-1880 17.5/15.4
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1450x280x125 (49x11x5) Pre-mounted heavy duty brackets 12.6 (27.7) 7.1 (15.6) 981 42 (93) 55 (123) DC grounded GRP Light gray 1620x355x255 (54x12x10) 15.3 (13.7) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
POWERWAVE
7330.04B
POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4, 17.5/15.4 TILT: FET LENGTH: 1.5m (4'11")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 67 13.4 4 >16 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >12 >-150 300 600 870-960 870-960 15.5/13.4 Dual linear slanted 50 <1.5:1 66 7 4 >16 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >13 >-150 300 600 1710-1880 1710-1880 17.5/15.4
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1450x280x125 (49x11x5) Pre-mounted heavy duty brackets 12.6 (27.7) 7.1 (15.6) 981 42 (93) 55 (123) DC grounded GRP Light gray 1620x355x255 (54x12x10) 15.3 (13.7) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
POWERWAVE
7330.06B
POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4, 17.5/15.4 TILT: FET LENGTH: 1.5m (4'11")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 67 13 6 >16 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >11 >-150 300 600 870-960 870-960 15.6/13.5 Dual linear slanted 50 <1.5:1 66 7 6 >16 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >11 >-150 300 600 1710-1880 1710-1880 17.3/15.2
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1450x280x125 (49x11x5) Pre-mounted heavy duty brackets 12.6 (27.7) 7.1 (15.6) 981 42 (93) 55 (123) DC grounded GRP Light gray 1620x355x255 (54x12x10) 15.3 (13.7) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
POWERWAVE
7331.00B
POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.5/14.4, 16.0/13.9 TILT: FET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 67 9 0 >16 >30 >30 <2.0 >-22 <0.5 >25 >25 >13 >11 >-150 300 600 870-960 870-960 16.6/14.5 Dual linear slanted 50 <1.5:1 64 9 0 >16 >30 >30 <2.0 >-22 <0.5 >25 >25 >13 >11 >-150 300 600 1710-1880 1710-1880 16.1/14
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1990x280x125 (66x11x5) Pre-mounted heavy duty brackets 15.3 (33.7) 9.8 (21.6) 1346 42 (93) 55 (123) DC grounded GRP Light gray 2160x355x255 (71x12x10) 18.3 (40.3) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
POWERWAVE
7331.02B
POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.5/14.4, 16.0/13.9 TILT: FET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 67 9 2 >16 >30 >30 <2.0 >-22 <0.5 >25 >25 >13 >11 >-150 300 600 870-960 870-960 16.6/14.5 Dual linear slanted 50 <1.5:1 64 9 2 >16 >30 >30 <2.0 >-22 <0.5 >25 >25 >13 >11 >-150 300 600 1710-1880 1710-1880 15.6/13.5
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1990x280x125 (66x11x5) Pre-mounted heavy duty brackets 15.3 (33.7) 9.8 (21.6) 1346 42 (93) 55 (123) DC grounded GRP Light gray 2160x355x255 (71x12x10) 18.3 (40.3) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
POWERWAVE
7331.04B
POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.5/14.4, 16.0/13.9 TILT: FET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 67 9 4 >16 >30 >30 <2.0 >-22 <0.5 >25 >25 >13 >11 >-150 300 600 870-960 870-960 16.6/14.5 Dual linear slanted 50 <1.5:1 64 9 4 >16 >30 >30 <2.0 >-22 <0.5 >25 >25 >13 >11 >-150 300 600 1710-1880 1710-1880 15.4/13.3
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1990x280x125 (66x11x5) Pre-mounted heavy duty brackets 15.3 (33.7) 9.8 (21.6) 1346 42 (93) 55 (123) DC grounded GRP Light gray 2160x355x255 (71x12x10) 18.3 (40.3) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
POWERWAVE
7331.06B
POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.5/14.4, 16.0/13.9 TILT: FET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 67 9 6 >16 >30 >30 <2.0 >-22 <0.5 >25 >25 >13 >11 >-150 300 600 870-960 870-960 16.6/14.5 Dual linear slanted 50 <1.5:1 64 9 6 >16 >30 >30 <2.0 >-22 <0.5 >25 >25 >13 >11 >-150 300 600 1710-1880 1710-1880 16.1/14
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1990x280x125 (66x11x5) Pre-mounted heavy duty brackets 15.3 (33.7) 9.8 (21.6) 1346 42 (93) 55 (123) DC grounded GRP Light gray 2160x355x255 (71x12x10) 18.3 (40.3) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
925 MHz
POWERWAVE
172
POWERWAVE
7770.00
POLARIZATION: X-Pol FREQUENCY (MHz): 824-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.6/11.5, 15.5/13.4 TILT: MET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 82 15 0 to 10 >18,17,17x=0,5,10 30 36 <2.0 <-25 1 >25 >25 15 >10 <-153 400 800 824-896 824-896 13.6/11.5 Dual linear 45 50 <1.5:1 86 7 0 to 8 >18,16,15x=0,4,8 30 36 <2.0 <-25 0.5 >27 >27 15 >10 <-153 250 500 1850-1990 1850-1990 15.5/13.4
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 1408x280x125mm (4'7"x11"x5") Pre-mounted heavy duty brackets 17.8 (39) 12.3 (27) 952 42 (93) 55 (123) DC grounded GRP Light Grey 1550x355x255 (61"x1'2"x10") 21.5 7020.00, 7031.00, 7032.00, 7033.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
870 MHz
POWERWAVE
7775.00
POLARIZATION: X-Pol FREQUENCY (MHz): 824-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15.9/13.8, 15.6/13.5 TILT: MET LENGTH: 2.6m (8'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 1.5:1 83 7.2 0 to 6 >17,16,15x=0,3,6 30 36 <1 <-25 0.5 >25 >25 18 12 <-153 400 800 824-896 824-896 15.9/13.8 Dual linear 45 50 1.5:1 92 6.8 0 to 8 >16,15,13x=0,4,8 30 36 <2 <-25 <0.5 >27 >27 18 9.2 <-153 250 500 1850-1990 1850-1990 15.6/13.5
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 2658x280x125mm (8'8"x11"x5") Pre-mounted heavy duty brackets 24.7 (54) 19.2 (42) 1797 42 (93) 55 (123) DC grounded GRP Light Grey 2800x355x255 (9'2"x1'2"x10") 32.5 7020.00, 7031.00, 7032.00, 7033.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
870 MHz
POWERWAVE
7772.00
POLARIZATION: X-Pol FREQUENCY (MHz): 824-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15/12.9, 15.7/13.6 TILT: MET LENGTH: 2.0m (6'6")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 1.5:1 82 9.5 0 to 7 >17,16,15x=0,4,8 30 36 <1 <-25 0.8 >25 >25 15 >10 <-153 400 800 824-896 824-896 15/12.9 Dual linear 45 50 1.5:1 93 7 0 to 8 >15,14,13x=0,4,8 30 36 <2 <-25 0.5 >25 >25 15 >9 <-153 250 500 1850-1990 1850-1990 15.7/13.6
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 2033x280x125mm (6'8"x11"x5") Pre-mounted heavy duty brackets 21.2 (47) 15.7 (35) 1375 42 (93) 55 (123) DC grounded GRP Light Grey 2175x355x255 (7'2"x14"x10") 27 7020.00, 7031.00, 7032.00, 7033.10 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
870 MHz
POWERWAVE
Gain dBi dBd 14.5/12.4, 17.5/15.4 12/9.9, 15/12.9 14.5/12.4, 17.5/15.4 14.5/12.4, 17.5/15.4 14.5/12.4, 17.5/15.4 11.5/9.4, 14.5/12.4 14.0/11.9, 17.0/14.9 14.0/11.9, 17.0/14.9 11.0/8.9, 14.0/11.9 13.5/12.4, 16.5/14.4 13.5/12.4, 16.5/14.4 13.5/12.4, 16.5/14.4 13.5/12.4, 16.5/14.4 14.0/11.9, 17.0/14.9
Tilt MET FET FET FET FET FET FET FET FET FET FET FET FET MET
Length 1.3m (4'3") 0.7m (2'3") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 0.7m (2'3") 1.4m (4'7") 1.4m (4'7") 0.7m (2'3") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 1.3m (4'3")
Page 177 178 179 180 181 182 183 184 185 186 187 188 189 190
176
POWERWAVE
7840.00
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.5/12.4, 17.5/15.4 TILT: MET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 824-896 14/11.9 Vertical linear 50 <1.4:1 73 15 0-12 >15 <0.5 >25 <-150 400 1850-1990 1850-1990 17.5/15.4 Vertical linear 50 <1.4:1 68 7 0-8 >15 -18 <0.5 >25 <-150 200
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1331x280x125 (4'4"x11"x5") Pre-mounted heavy duty brackets 17.5 (38.5) 12 (26.4) 900 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1495x355x255 (4'11"x1'2"x10") 15.8 (34.8) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
860 MHz
1930 MHz
177
POWERWAVE
7337.00B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 70 GAIN (dBi/dBd): 12/9.9, 15/12.9 TILT: FET LENGTH: 0.7m (2'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 12.2/10.1 Vertical linear 50 <1.4:1 70 29 0 >14 <0.5 >28 <-150 350 1850-1990 1850-1990 15.4/13.3 Vertical linear 50 <1.4:1 71 13 0 >14 -18 <0.5 >28 <-150 175
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN Female Bottom 710x280x125 (2'4"x11"x5") Pre-mounted standard brackets 9.2 (20.2) 5.5 (12.1) 480 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 850x355x200 (2'9"x1'2"x10") 6.5 (14) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
860 MHz
1930 MHz
178
POWERWAVE
7333.00B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 70 GAIN (dBi/dBd): 14.5/12.4, 17.5/15.4 TILT: FET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 14.8/12.7 Vertical linear 50 <1.4:1 72 15 0 >16 <0.5 >28 <-150 350 1850-1990 1850-1990 17.6/15.5 Vertical linear 50 <1.4:1 70 7 0 >16 -17 <0.5 >28 <-150 175
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN Female Bottom 1350x280x125 (4'5"x11"x5") Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 913 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5'x1'2"x10") 13.9 (30.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
860 MHz
1930 MHz
179
POWERWAVE
7333.02B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 70 GAIN (dBi/dBd): 14.5/12.4, 17.5/15.4 TILT: FET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 14.8/12.7 Vertical linear 50 <1.4:1 72 15 2 >16/16 <0.5 >28 <-150 350 1850-1990 1850-1990 17.6/15.5 Vertical linear 50 <1.4:1 71 7 2 >16/16 -17 <0.5 >28 <-150 175
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN Female Bottom 1350x280x125 (4'5"x11"x5") Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 913 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5'x1'2"x10") 13.9 (30.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
860 MHz
1930 MHz
180
POWERWAVE
7333.06B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 70 GAIN (dBi/dBd): 14.5/12.4, 17.5/15.4 TILT: FET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 14.8/12.7 Vertical linear 50 <1.4:1 72 15 6 >16/16 <0.5 >28 <-150 350 1850-1990 1850-1990 17.6/15.5 Vertical linear 50 <1.4:1 71 7 6 >16/16 -17 <0.5 >28 <-150 175
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN Female Bottom 1350x280x125 (4'5"x11"x5") Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 913 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5'x1'2"x10") 13.9 (30.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
860 MHz
1930 MHz
181
POWERWAVE
7338.00B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 80 GAIN (dBi/dBd): 11.5/9.4, 14.5/12.4 TILT: FET LENGTH: 0.7m (2'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 11.7/9.6 Vertical linear 50 <1.4:1 79 29 0 >15 <0.5 >26 <-150 350 1850-1990 1850-1990 14.5/12.4 Vertical linear 50 <1.4:1 79 13 0 >15 -18 <0.5 >26 <-150 175
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN Female Bottom 710x280x125 (2'4"x11"x5") Pre-mounted standard brackets 9.2 (20.2) 5.5 (12.1) 480 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 850x355x200 (2'9"x1'2"x10") 6.5 (14) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
860 MHz
1930 MHz
182
POWERWAVE
7332.02B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 80 GAIN (dBi/dBd): 14.0/11.9, 17.0/14.9 TILT: FET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 14/11.9 Vertical linear 50 <1.4:1 81 15.5 2 >16 <0.5 >27 <-150 350 1850-1990 1850-1990 17.2/15.1 Vertical linear 50 <1.4:1 79 7 2 >16 -17 <0.5 >27 <-150 350
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN Female Bottom 1350x280x125 (4'5"x11"x5") Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 913 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5'x1'2"x10") 13.9 (30.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
860 MHz
1930 MHz
183
POWERWAVE
7332.06B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 80 GAIN (dBi/dBd): 14.0/11.9, 17.0/14.9 TILT: FET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 14/11.9 Vertical linear 50 <1.4:1 81 15.5 6 >16 <0.5 >27 <-150 350 1850-1990 1850-1990 17.2/15.1 Vertical linear 50 <1.4:1 79 7 6 >16 -17 <0.5 >27 <-150 350
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN Female Bottom 1350x280x125 (4'5"x11"x5") Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 913 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5'x1'2"x10") 13.9 (30.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
860 MHz
1930 MHz
184
POWERWAVE
7339.00B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 11.0/8.9, 14.0/11.9 TILT: FET LENGTH: 0.7m (2'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 11.2/9.1 Vertical linear 50 <1.4:1 88 29 0 >15 <0.5 >25 <-150 350 1850-1990 1850-1990 14/11.9 Vertical linear 50 <1.4:1 92 14 0 >15 -18 <0.5 >25 <-150 175
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN Female Bottom 710x280x125 (2'4"x11"x5") Pre-mounted standard brackets 9.2 (20.2) 5.5 (12.1) 480 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 850x355x200 (2'9"x1'2"x10") 6.5 (14) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
860 MHz
1930 MHz
185
POWERWAVE
7332.00B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.5/12.4, 16.5/14.4 TILT: FET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 13.5/12.4 Vertical linear 50 <1.4:1 89 15 2 >16 <0.5 >26 <-150 350 1850-1990 1850-1990 17.6/15.516.5/14.4 Vertical linear 50 <1.4:1 91 7 2 >16 -17 <0.5 >26 <-150 175
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN Female Bottom 1350x280x125 (4'5"x11"x5") Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 913 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5'x1'2"x10") 13.9 (30.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
860 MHz
1930 MHz
186
POWERWAVE
7334.00B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.5/12.4, 16.5/14.4 TILT: FET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 14/11.9 Vertical linear 50 <1.4:1 89 15 0 >16 <0.5 >26 <-150 350 1850-1990 1850-1990 16.5/14.4 Vertical linear 50 <1.4:1 91 7 0 >16 -17 <0.5 >26 <-150 175
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN Female Bottom 1350x280x125 (4'5"x11"x5") Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 913 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5'x1'2"x10") 13.9 (30.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
860 MHz
1930 MHz
187
POWERWAVE
7334.02B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.5/12.4, 16.5/14.4 TILT: FET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 13.5/11.4 Vertical linear 50 <1.4:1 89 15 2 >16/16 <0.5 >26 <-150 350 1850-1990 1850-1990 16.5/14.4 Vertical linear 50 <1.4:1 91 7 2 >16/16 -17 <0.5 >26 <-150 175
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN Female Bottom 1350x280x125 (4'5"x11"x5") Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 913 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5'x1'2"x10") 13.9 (30.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
860 MHz
1930 MHz
188
POWERWAVE
7334.06B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.5/12.4, 16.5/14.4 TILT: FET LENGTH: 1.4m (4'7")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 13.5/11.4 Vertical linear 50 <1.4:1 89 15 6 >16/16 <0.5 >26 <-150 350 1850-1990 1850-1990 16.5/14.4 Vertical linear 50 <1.4:1 91 7 6 >16/16 -17 <0.5 >26 <-150 175
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1 x 7/16 DIN Female Bottom 1350x280x125 (4'5"x11"x5") Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 913 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5'x1'2"x10") 13.9 (30.6) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
860 MHz
1930 MHz
189
POWERWAVE
7850.00B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 14.0/11.9, 17.0/14.9 TILT: MET LENGTH: 1.3m (4'3")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 13.8/11.7 Vertical linear 50 <1.5:1 90 15 0-12 >18 <0.5 >26 <-150 400 1850-1990 1850-1990 16/13.9 Vertical linear 50 <1.5:1 90 6.5 0-8 >18 -18 <0.5 >26 <-150 200
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
2 x 7/16 DIN Female Bottom 1331x280x125 (4'4"x11"x5") Pre-mounted heavy duty brackets 17.5 (38.5) 12 (26.4) 900 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1495x355x255 (4'11"x1'2"x10") 15.8 (34.8) 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
860 MHz
1930 MHz
190
The indoor antenna is designed to blend into a wall or ceiling inside a building and is the base antenna for the Powerwave distributed antenna system. The indoor antenna covers all bands from 800 MHz up to 2500 MHz and supports multiband operation. Easy-to-install dual band antennas from Powerwave are deployed in numerous wireless networks worldwide. Using fewer antennas of discreetly functional design beats using numerous antennas of unsightly size and appearance especially with today's aesthetic concerns.
Indoor Antennas
POWERWAVE
Indoor Antennas
192
POWERWAVE
Tilt 0
Page 194
193
POWERWAVE
7999.00
POLARIZATION: X-Pol FREQUENCY (MHz): 800/1900 HORIZONTAL BEAM WIDTH (): 70 GAIN (dBi/dBd): 9/6.9, 9/6.9 TILT: 0 LENGTH: 216mm (8.5")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Front to back ratio (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1.5:1 72 70 0 16 20 8 <-141 50 824-896 9/6.9 X-Pol 50 1.5:1 56 60 0 28 15 4 800/1900 1850-1990 9/6.9
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, kg (lbs) Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) 2 x N Female Bottom 216x216x73.7 (8.5"x8.5"x2.9") 0.73 (1.6) RAL 7035, Light grey -
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
194
POWERWAVE
Tilt 0 0
195
POWERWAVE
7336.10
POLARIZATION: V-Pol FREQUENCY (MHz): 800-2500 HORIZONTAL BEAM WIDTH (): 60/90 GAIN (dBi/dBd): 6/3.9, 9/6.9 TILT: 0 LENGTH: 0.210m (8")
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Front to back ratio (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 16 15 <-150 <1.9:1 95 85 <1.5:1 85 80 0 12 17 806-896 6.5/4.4 806-896 6.5/4.4 Vertical 50 <1.9:1 65 40 <1.8:1 60 40 800-2500 806-896 9.5/7.4 806-896 10/7.9
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, kg (lbs) Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) 1 x N Female Bottom 210 x 180 x 42 (8"x7"x2") 1.0 (2.2) ASA White 240x280x45 (9"x11"x2") 1.2 (2.6)
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
196
POWERWAVE
7336.00
POLARIZATION: V-Pol FREQUENCY (MHz): 800-2500 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi/dBd): 3/0.9 TILT: 0 LENGTH: 0.185m ( 7)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Beam width: Ceiling Mounted () Beam width: Wall Mounted () IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1.5:1 360 70 1.5:1 360 70 <-150 806-896 3/0.9 880-960 3/0.9 Vertical 50 1.5:1 360 70 1.5:1 360 70 800-2500 1700-1900 3/0.9 1900-2500 3/0.9
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, diameter x depth, mm (ft) Mounting Weight, kg (lbs) Radome material Radome colour Packet size, HxWxD, mm (ft) Shipping weight, kg (lbs) 1 x N Female Back 65 x185 (2.5 x 7) 0.2 (0.44) ABS White 210x200x115 (8"x8"x5") 0.36 (0.8)
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
197
The Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. The system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus. ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system
POWERWAVE
E-RET
Part Numbers 7011.00 Single Band E-RET 7031.00 Single Band E-RET for Multiband Antennas Page 206 207
199
POWERWAVE
7010.00
ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operation temperature range Type Approvals MTBF 7010.00 AISG +9 to +30V <1mC <500 mA at Vin <10 V, <400 mA at Vin <19 V, <250 mA at Vin <19 V <100 mA at Vin <19 V, <50 mA at Vin <19 V 9.6 kbps, 38.4 kbps <+/-0.8 mm -40 to +65 C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 62 x 78 x 216 M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
200
POWERWAVE
7012.00
ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operation temperature range Type Approvals MTBF 7012.00 AISG (Siemens) +9 to +30V <1mC <500 mA at Vin <10 V, <400 mA at Vin <19 V, <250 mA at Vin <19 V <100 mA at Vin <19 V, <50 mA at Vin <19 V 9.6 kbps, 38.4 kbps <+/-0.8 mm -40 to +65 C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 62 x 78 x 216 M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. Node B controls and supplies DC Power to the ALDs via the feeder.
201
POWERWAVE
7032.00
ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operation temperature range Type Approvals MTBF 7032.00 AISG +9 to +30V <1mC <500 mA at Vin <10 V, <400 mA at Vin <19 V, <250 mA at Vin <19 V <100 mA at Vin <19 V, <50 mA at Vin <19 V 9.6 kbps, 38.4 kbps <+/-0.3 mm -40 to +65 C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) Grounded via antenna IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
202
POWERWAVE
7033.00
ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operation temperature range Type Approvals MTBF 7033.00 AISG (Siemens) +9 to +30V <1mC <500 mA at Vin <10 V, <400 mA at Vin <19 V, <250 mA at Vin <19 V <100 mA at Vin <19 V, <50 mA at Vin <19 V 9.6 kbps, 38.4 kbps <+/-0.8 mm -40 to +65 C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) Grounded via antenna IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. Node B controls and supplies DC Power to the ALDs via the feeder.
203
POWERWAVE
7020.00
ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operation temperature range Type Approvals MTBF 7020.00 AISG +9 to +30V <1mC <500 mA at Vin <10 V, <400 mA at Vin <19 V, <250 mA at Vin <19 V <100 mA at Vin <19 V, <50 mA at Vin <19 V 9.6 kbps, 38.4 kbps <+/-0.3 mm -40 to +65 C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) Grounded via antenna IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
204
POWERWAVE
7030.00
ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operation temperature range Type Approvals MTBF 7030.00 AISG +9 to +30V <1mC <500 mA at Vin <10 V, <400 mA at Vin <19 V, <250 mA at Vin <19 V <100 mA at Vin <19 V, <50 mA at Vin <19 V 9.6 kbps, 38.4 kbps <+/-0.3 mm -40 to +65 C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) Grounded via antenna IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
205
POWERWAVE
7011.00
ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Power consumption during tilting Power consumption idle Data protocol Rod positioning accuracy Operation temperature range MTBF 7011.00 Ericsson +12 to +30V <10 W <1.5 W ISO/IEC 8482 and 1056-ASC/RET interface <+/-0.3 mm -40 to +65 C >1500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connectors output / input Ingress protection Environmental 1 kg 62 x 78 x 216 M6 screw DIN 45 326 IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. Node B controls and supplies DC Power to the ALDs via the feeder.
206
POWERWAVE
7031.00
ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Power consumption during tilting Power consumption idle Data protocol Rod positioning accuracy Operation temperature range MTBF 7031.00 Ericsson +12 to +30V <10 W <1.5 W ISO/IEC 8482 and 1056-ASC/RET interface <+/-0.3 mm -40 to +65 C >1500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connectors output / input Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) Grounded via antenna DIN 45 326 IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. Node B controls and supplies DC Power to the ALDs via the feeder.
207
Powerwaves Clean Site solutions minimize the visual impact of a complete antenna system and significantly reduces investment and operational costs for network operators when building new or upgrading existing networks. Building permits for existing antenna installations can be used when replacing old, passive antennas with the Clean Site solution. This simplifies the site acquisition process significantly and shortens roll-out time considerably. All Clean Site antennas support Remote Electrical Tilt for optimization of the coverage footprint and tuning of network performance. By integrating all functionality into one single unit, Clean Site offers you a flexible and attractive solution in the most cost efficient way.
POWERWAVE
The Powerwave Clean Site program integrates a full range of multiband solutions to make the most of tower space. High-volume production in several countries ensures rapid delivery. Our products provide design and installation flexibility that meet a variety of needs, such as enabling co-siting of networks and systems and dealing with space and zoning issues limiting the appearance and location of new installations. Single System The baseline for the Clean Site single system is our single band broadband antenna portfolio with cross polar diversity for either low band or high band. Our low band antenna covers the full frequency range from 806-960 MHz while the high band antenna covers 1710- 2170 MHz. Customize your Clean Site single unit by combining a low band antenna with a Remote Electrical Tilt (RET) Unit or a high band antenna with a Tower Mounted Amplifier (TMA) for either an 1800, 1900 or 2100 frequency band and RET Unit. No matter the combination, your customized Clean Site Single System is contained in one single housing enclosure. Dual System The Clean Site Dual solution's basic configuration stems from the Powerwave dual band low band/high band antennas. Combine the dual band antenna with Remote Electrical Tilt (RET) units, Tower Mounted Amplifiers (TMA) and diplex filters to suit your network requirements. As with all Clean Site units, all of the necessary components are contained in one discrete enclosure. Triple System The Powerwave Clean Site Triple solution is the most advanced antenna system within the Clean Site program. The Clean Site Triple solution is based on the high performance triple band antenna platform and is the superior solution for co-siting. An old installed passive antenna can be replaced by a Clean Site Triple System with Remote Electrical Tilt (RET) Control and two dual TMAs and two triplexers without changing the visual impact. IntelliMast As a part of the Powerwave Clean Site program, the IntelliMast offers a flexible way of integrating multi-sector solutions in a pole configuration under one single radome. IntelliMast-CS, supporting the full broad band antenna range, is the mounting solution to use when more than one sector is covered from a single location. If a crane free installation is required, the super light weight Intellimast-PL is the solution to use, supporting the 1.4m (4 feet) multiband antennas. The IntelliMast solution offers maximum sector coverage with minimum visual impact.
209
POWERWAVE
Q 0 1-9
PPPP.QRS.TUVX.YZ
R Basic config Integration config M S 1 2 3 PPPP part number antenna Q RS Tilt variant Concept I 1 2 3 0 T U V X YZ RET Functionality RET SW # of TMAs per sector # of combined filter bands per sector Variant # C T 0 1 2 3 A B C No RET 1 RET controlled band 2 RET controlled bands 3 RET controlled bands i-RET (male connector) i-RET (male+female connector) i-RET (male+male) X 0 V 0 1 2 E No TMA 1 TMA per sector 2 TMA per sector Empty TMA box incl Description 2 3 E No Filters 2 diplexers per sector 2 triplexers per sector Empty Filter box incl Description Description S F U C T D 0 Description Intellimast - CS 1 sector Intellimast - CS 2 sector Intellimast - CS 3 sector Intellimast - PL 1 sector Intellimast - PL 2 sector Intellimast - PL 3 sector Standard antenna No bracket Standard antenna Fixed bracket Standard antenna Connector up Standard antenna Combined F&U Standard antenna Tilt bracket Standard antenna Combined T&U Single sector Clean Site
Description
For more information visit us at: http://www.powerwave.com/cleansite.asp. All model configurations do not exist. Please consult with your local Powerwave Sales Representative to determine which configurations are available.
210
All Powerwave antennas are delivered with mounting brackets pre-mounted. The intent is to reduce logistic and tower crew installation costs for our customers. All brackets have a high quality surface treatment to maintain the Powerwave standard for product exposure to severe environments. By using steel in the sheet metal parts of the tilt brackets, a robust and rigid design is ensured.
Mounting Solutions
POWERWAVE
Mounting Solutions
212
POWERWAVE
Mounting Solutions
2201.11
ANTENNA LENGTH: <1.5 meter/ 5 feet WEIGHT: 0.3 kg/ 0.7 lbs
MECHANICAL DRAWINGS
MECHANICAL SPECIFICATIONS
Dimensions, H x W x D Weight Material Packing size, H x W x D Shipping weight Tilt range Pole dimension Panning range Accessory products See Drawings 0.3 kg/ 0.7 lbs Galvanized steel, stainless screws & nuts 200 x 200 x 20 (mm) 0.3 kg/ 0.7 lbs See diagram NA 5-55 To be used with antenna tilt brackets 7456.00A
All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets. Random Vibration: Sinus Vibration: IEC 60068-2-64 IEC 60028-2-6
POWERWAVE
Mounting Solutions
2210.10
Only one kit per antenna.
MECHANICAL DRAWINGS
MECHANICAL SPECIFICATIONS
Dimensions, H x W x D Weight Material Packing size, H x W x D Shipping weight Tilt range Pole dimension Panning range Accessory products See Drawings 1.0kg/ 2.2 lbs Galvanized steel, stainless screws & nuts 200 x 200 x 20 (mm) 1 kg/ 2.2 lbs See diagram NA 2210.10 To be used with antenna tilt brackets 7256.00
All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets. Random Vibration: Sinus Vibration: IEC 60068-2-64 IEC 60028-2-6
POWERWAVE
Mounting Solutions
7256.00
All Powerwave Antennas larger than 1.5 meter (5 feet) shall be installed with Powerwave heavy duty bracket, 7256.00. Below is a list outlining which antennas come with premounted heavy duty brackets.
MECHANICAL DRAWINGS
MECHANICAL SPECIFICATIONS
Dimensions, H x W x D Weight Material Packing size, H x W x D Shipping weight Tilt range Pole dimension Panning range Accessory products See Drawings 5.5 kg/ 12.1 lbs Galvanized steel, stainless screws & nuts Call for info 5.9 kg/ 13 lbs See diagram 25-125 mm NA Heavy Duty Bracket Panning Kit 2210.10 and Triple Mount Bracket 7454.00
All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets. Random Vibration: Sinus Vibration: IEC 60068-2-64 IEC 60028-2-6
POWERWAVE
Mounting Solutions
7456.00A
All Powerwave antennas shorter than 1.5 meter (5 feet) * shall be installed with Powerwave tilt bracket, 7456.00. The Family/ Part Number column is a list outlining which antennas come with pre-mounted tilt brackets. For a reference list of accessory products see Mechanical Specifications (*Urban antennas longer than 1.5 meter with three brackets use 7456.00)
MECHANICAL DRAWINGS
MECHANICAL SPECIFICATIONS
Dimensions, H x W x D Weight Material Packing size, H x W x D Shipping weight Tilt range Pole dimension Panning range Accessory products See Drawings 3.6 kg/7.9 lbs Galvanized steel, stainless screws & nuts Call for info 4.0 kg/ 8.8 lbs See diagram 25-125 mm NA Panning Kit 2201.11/ Big Pole Clamp, 7458.00/ Flush wall, pole clamp 7455.00 and Triple Mount Bracket 7454.00
All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets. Random Vibration: Sinus Vibration: IEC 60068-2-64 IEC 60028-2-6
POWERWAVE
Mounting Solutions
7454.00A
MECHANICAL DRAWINGS
MECHANICAL SPECIFICATIONS
Dimensions, H x W x D Weight Material Packing size, H x W x D Shipping weight Tilt range Pole dimension Panning range Accessory products See Drawings 6.8 kg/15 lbs Steel Call for info Call for info See diagram, Only antennas <1.5 m/ 5 feet 75-114 mm Call for info Can be used with antenna tilt brackets 7456.00A and 7256.00
All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets. Random Vibration: Sinus Vibration: Salt Mist: NA 217
Copyright 2007 Powerwave Technologies, Inc. All rights reserved.
NA NA
POWERWAVE
Mounting Solutions
7458.00A
ANTENNA LENGTH: <1.5 meter/ 5 feet WEIGHT: 9.5 kg/ 20.9 lbs
Powerwave large pole mounting adapter is to be used with Powerwave antennas shorter than 1.5 meter/5 feet, see table below. Only one kit per antenna.
MECHANICAL DRAWINGS
MECHANICAL SPECIFICATIONS
Dimensions, H x W x D Weight Material Packing size, H x W x D Shipping weight Tilt range Pole dimension Panning range Accessory products See Drawings 9.5 kg/ 20.9 lbs Galvanized steel, stainless screws & nuts 200 x 200 x 20 (mm) 10 kg/22 lbs NA Max 215/ mm 78.5" NA To be used with antenna tilt brackets 7456.00A
All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets. Random Vibration: Sinus Vibration: IEC 60068-2-64 IEC 60028-2-6
POWERWAVE
Mounting Solutions
7455.00
Powerwave hose clamp is to be used with Powerwave antennas shorter than 1.5 meter/5 feet. Only one kit per antenna.
MECHANICAL DRAWINGS
MECHANICAL SPECIFICATIONS
Dimensions, H x W x D Weight Material Packing size, H x W x D Shipping weight Tilt range Pole dimension Panning range Accessory products See Drawings 0.4 kg/ 0.9 lbs Galvanized steel, stainless screws & nuts 200 x 200 x 20 (mm) 0.4 kg/ 0.9 lbs NA 40-100 mm/ 1.57"-3.9" NA To be used with antenna tilt brackets 7456.00A
All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets. Random Vibration: Sinus Vibration: IEC 60068-2-64 IEC 60028-2-6
Antenna FAQ
POWERWAVE
Antenna FAQ
Q: A:
Are your indoor antennas broadband (7336.00, 7336.10)? Yes, these antennas work from 806 MHz through 2.5 GHz, providing an effective solution for multiple technologies such as iDEN, CDMA, GSM, UMTS, WiFi to name a few. Why do you specify different gain for the same antenna in your data sheet? The gain is dependent on the frequency used. The stacking distance of the elements is changed relative to the frequency. This means that the gain will increase with a higher frequency. Powerwave always tries to give you the best information possible, and therefore we specify the gain at common used frequency to help you implement the antennas easily in your network. Why do you use different materials in your radomes? Mechanical structure of antennas are designed in different ways. Powerwave uses either the reflector as the structure, or the radome in a combination with the reflector. When using the reflector as the base for the mechanical structure, the radome is only used for weather protection, and therefore we use a light plastic radome (ASA/GRP). When increasing the size of an antenna there is no benefit to use the reflector as the mechanical structure as it would increase the overall weight of the product. Therefore, when building larger sized antennas, Powerwave utilizes a combination of reflector and radome as the mechanical structure. Normally, a glass fibre radome is used in the latter instances. Thus, the mechanical structures of the Powerwave antennas are designed to minimize product weight while maintaining a robust and reliable solution. Why do you have different gain on your triple band antennas? Powerwave designs triple band antennas by using one low band antenna throughout the whole length, while you have the two upper band antennas on top of each other. This means that the high band antenna at the upper part of the antenna needs more internal cabling compared to the high band antenna at the lower part. This extra internal cabling introduces some more losses, and the result is that the gain of the upper high band antenna is slightly lower. How do I get antenna patterns? The antenna patterns are available at our webpage, please visit: www.powerwave.com/antennapatterns.asp. On this page you are able to download our antenna patterns for many different planning tools. Please contact us if you need assistance. You are mentioning broadband antennas - how do you define that? When Powerwave is stating broadband antennas, we are indicating that these can be used for more than one system. We usually state low broadband, meaning that the antennas can be used for systems operating from 806 to 960 MHz. High band usually means that the antennas can be used for systems from 1710 to 2170. Some antennas may differ from this. The reason why we design and produce broadband antennas is to achieve logistical benefits for our global customer base, allowing for deployments in all markets worldwide.
Q: A:
Q: A:
Q: A:
Q: A:
Q: A:
220
POWERWAVE
Powerwave prides itself on stringent testing requirements with conservative, yet realistic claims of performance in terms of what our products offer. Our antennas are evaluated on performance and reliability. Testing Capabilities Powerwave has the largest indoor antenna measuring range in northern Europe. Our state of the art testing facilities are located at the Powerwave Antenna Design Centers in Stockholm, Sweden and Santa Ana, California. The measuring range provides the ability to constantly improve and tune the performance of our antennas as well as perform benchmark testing for our customers. The advantage of an indoor antenna range compared to an outdoor antenna range is the consistency of measurement over time due to the controlled reflection environment and climate. Testing Procedures The Clean Site Dual solution's basic configuration stems from the Powerwave dual band low band/high band antennas. Electrical performance can be subdivided into a set of parameters/tests that characterize the antenna's ability to function well; however, good performance is also a sign of good quality and a testament to the tremendous amount of effort we put into our antennas in the design stage. Every Powerwave antenna is verified with the following list of parameters: - Radiation pattern - Horizontal beam width - Elevation beam width - Electrical tilt angle - Front-to-back ratio - First upper side lobe suppression - First null fill below horizon - Vertical beam squint - XPD (cross polarized antennas only) - Tracking - Vertical Nullfill - Gain - Power handling - Return loss - Lightning protection - Mechanical durability - Intermodulation products
221
POWERWAVE
Part Number 2201.11 2210.10 7010.00 7011.00 7012.00 7020.00 7030.00 7031.00 7032.00 7033.00 7182.40 7182.42 7182.44 7182.46 7183.42 7183.46 7184.40 7184.42 7184.44 7185.40 7185.42 7199.40 7199.42 7200.40 7200.42 7200.43 7200.44 7200.46 7216.03 7217.03 7217.04 7217.11 7218.03 7218.04 7218.05 7218.09 7218.13 7218.14 7218.15 7218.19 7220.40 7220.42 7220.44 7221.40 7221.44 7225.04 7226.03 7226.04 7227.04 7228.03 7228.04 7228.06 7228.08 7230.04 7231.04 7231.06 7232.04 7232.07 7233.04 7233.06 7233.08 7255.03 7255.04 7256.00 7263.01 7263.04 7270.02 7271.02 7271.03
Page 213 214 200 206 201 204 205 207 202 203 113 114 115 116 111 112 120 121 122 107 108 128 129 123 124 125 126 127 83 87 86 85 93 94 98 99 95 96 100 101 117 118 119 109 110 140 141 142 146 148 149 150 151 153 154 155 156 157 158 159 160 90 97 215 88 89 139 143 144
Part Number 4168.11.33.00 4168.11.33.02 7272.02 7273.02 7273.03 7281.02 7281.04 7282.03 7336.00 7336.10 7455.00 7471.00 7472.00 7473.00 7476.00 7476.02 7476.06 7477.00 7477.02 7477.06 7478.00 7478.02 7478.06 7481.00 7482.00 7483.00 7486.00 7486.02 7486.06 7487.00 7487.02 7487.06 7488.00 7488.02 7488.06 7700.00 7700.06 7701.00 7701.02 7701.06 7720.00 7721.00 7721.02 7721.06 7721.10 7722.00 7750.00 7750.90 7752.00 7752.90 7755.00 7755.90 7760.00 7760.02 7762.00 7765.00 7766.00 7770.00 7772.00 7775.00 7780.00 7782.00 7785.00 7804.00 7824.00 7834.00 7838.00 7840.00 7999.00
Page 133 134 147 152 145 91 92 84 197 196 219 28 35 36 25 26 27 29 30 32 31 33 34 37 42 45 38 39 40 41 47 48 43 44 46 11 12 17 13 14 10 18 15 19 16 20 61 64 66 68 69 65 56 55 58 57 59 173 175 174 75 76 77 50 51 52 53 177 194
Part Number 4168.11.33.03 4168.11.33.06 4168.11.33.52 4168.21.33.00 4168.21.33.03 7143.24.33.50B 7144.24.33.50B 7145.24.33.50B 7329.00B 7329.06B 7330.00B 7330.02B 7330.04B 7330.06B 7331.00B 7331.02B 7331.04B 7331.06B 7332.00B 7332.02B 7332.06B 7333.00B 7333.02B 7333.06B 7334.00B 7334.02B 7334.06B 7337.00B 7338.00B 7339.00B 7390.00B 7454.00A 7456.00A 7458.00A 7735.00A 7740.00A 7745.00A 7750.0S0.0000.00 7750.1ST.0000.00 7752.0S0.0000.00 7755.0S0.0000.00 7770.00A 7772.00A 7775.00A 7850.00B
Page 135 136 137 131 132 103 104 105 162 163 164 165 166 167 168 169 170 171 186 183 184 179 180 181 187 188 189 178 182 185 81 217 216 218 21 22 23 62 63 67 70 71 72 73 190
222
POWERWAVE
Contact Us
Quality and Environmental Management System Certifications ISO9001 TL9000 TickIT-5 ISO14001
Sales by Region Worldwide Corporate Headquarters 1801 East St. Andrew Place Santa Ana, CA 92705 USA +1 714 466 1000 +1 714 466 5800 FAX USSales@pwav.com Main European Office EMEASales@pwav.com Main Asia-Pacific Office APACSales@pwav.com Brazil Sales SouthAmericaSales@pwav.com
Worldwide Corporate Headquarters 1801 East St. Andrew Place Santa Ana, CA 92705 USA +1 714 466 1000 +1 714 466 5800 FAX www.powerwave.com
Copyright 2008 Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc. NetWay Manager, Clean Site, IntelliMast, VersaFlex, and Powering the Next Wave of Growth in Wireless are trademarks of Powerwave Technologies, Inc. All specifications are subject to change without notice; please contact your Powerwave representative for current specifications. Powerwave Technologies, Inc. is an ISO9001 and TL9000 certified company.