Академический Документы
Профессиональный Документы
Культура Документы
4 Insert Rule in the Alteration Editor ........................................................................4 Create new Model Options in the Model Editor.....................................................4 Support for SQL and MSDE Storage Areas in CSV..............................................4 Pattern Conversion Wizard available for PE-MWS ...............................................5 New Install License Dialog....................................................................................5 Pattern Design 8.0.7........................................................................6
Distributing and Combining darts on the same line...............................................6 File/Save Duplicate Point Message ......................................................................6 V8 Pieces in V7 Model..........................................................................................7 (MK/V8) Tag Added to Some Functions ...............................................................7 AM-GMS ...............................................................................................................8
Support for up to 99 Notch Types ..............................................................19 Long Names and Extensions for Plot Files ..............................................19 Enhancements to Add Dart with Fullness ................................................19 Plotting Multiple Size Codes Stacked ........................................................19 Long Size Names when converting MK data to AM ...............................20 New Message in Copy Model......................................................................20 Deleting points in Silhouette Line/Curve ...................................................21 New option in Grade Checker .....................................................................21
Page 2 of 21
4/28/2004
An enhancement has also been made to the Grade Checker to support selecting multiple pieces.
Page 3 of 21
4/28/2004
Interactive Blocking and Buffering Interactive Block/Buffering was implemented in V8.0.5 with the Block/Buffer override function in the Piece menu of Marker Making. This required that Blocking and/or Buffering be defined for the Order for the marker. Now, the Interactive Block/Buffering can be used for markers that do not have Blocking and/or Buffering set up in the Order (Lay Limits and Block/Buffer table). In addition, it is possible to change a blocked piece to a buffered piece. Insert Rule in the Alteration Editor A new function Insert, has been added to the Rule menu in the Alteration Editor which allows a new rule will be added before the rule that is selected. Create new Model Options in the Model Editor When adding a new Model Option, you can choose its location amongst existing options. The new Model Option is inserted after the currently selected option. Support for SQL and MSDE Storage Areas in CSV CSV Tools can now be used with MSDE and SQL devices. If SQL/MSDE devices are defined, the destination storage in Import and the Source Storage Area in Reports can be specified as a SQL/MSDE device.
Page 4 of 21
4/28/2004
Pattern Conversion Wizard available for PE-MWS The Pattern Conversion Wizard has been added to AccuMark Professional Edition Management Workstations (MWS). New Install License Dialog The Install License dialog has been updated with a reminder to verify your systems date and time before installing your license file. This will avoid potential security problems on a system that does not have the date and time set correctly.
A Validate button has been added to perform checks on your license file and key. Error messages are displayed if it cannot read the key or license file, or if your license file and key do not match.
Page 5 of 21
4/28/2004
Original
When Darts are combined, the angle and length of the dart are maintained. For example, in the image above, if the darts on the right piece were combined back into the original dart, the dart apex readjusts and the piece would look like the original piece, shown above left. File/Save Duplicate Point Message The Duplicate point ID message that may display when saving data now indicates the piece name(s) and point number(s).
Page 6 of 21
4/28/2004
V8 Pieces in V7 Model In Previous releases, it was possible to save a V8 piece in a V7 model. A message has been added to notify of this situation.
This message appears regardless of whether V8 functionality has actually been used. The message displays whenever Preferences is switched from V8 to V7, the work area or PDS is closed, or the "save and exit" button is selected while saving, if there are ANY pieces retrieved or in the workspace. (MK/V8) Tag Added to Some Functions Some functions are supported by both the MicroMark and V8 of the AccuMark, but are not supported in V7 AccuMark data. For example, Intersection Notch is only compatible for MicroMark data OR AccuMark V8 data. These functions have been identified by adding (MK/V8) next to the function name in the drop down menu. The list includes a few corner types that were previously only available for MicroMark data. In earlier versions these functions had only a (MK) or (AM) next to the function name. These functions include: Intersection Notch (MK/V8) Unclipped Perimeter (MK/V8) Double Miter Corner (MK/V8) Tab Corner (MK/V8) Nub/Extension Corner (MK/V8)
Additionally, the function Rename Sizes has had an (AM) placed after the function to indicate that this functionality is only available for data saved in the AccuMark format.
Page 7 of 21
4/28/2004
Improvements to notch and point selection in Copy Grade Changes have been made for selecting a Target point that is a Standard Notch, where both a notch and a base point exist at the same location. The Target point selection is based on the source selection. If the source selection is a point, the system will only allow points to be selected for the target selection. If the source selection is a notch, the system will only allow notches to be selected for the target selection. For example, Copy grade rule can now copy the grade rule of the notch base point for standard notches. If there is a notch and a notch base point at the same location, the system selects whichever one has a grade rule. AM-GMS Preferences have been added to the AE-GMS and PE-GMS workstations. See the On Line Help for information on each of the settings.
Page 8 of 21
4/28/2004
Install License
Now displays the key number when the Install License application is started. If no key is attached, or if it cannot read the key, '0' will be displayed in the key text field.
Page 9 of 21
4/28/2004
MicroMark annotation file indexes 1-154 will be converted to AccuMark internal types 100-254. MicroMark annotation file indices 155-255 will not be converted. The MicroMark annotation indices must be changed to fall within the valid range 1-154 before using the Annotation Converter. Lines have characteristics of Annotation label A (scaling, positioning, mirroring, plotting, etc.) LBA and LBB can be added in the Annotation editor to add annotation line characteristics. Index 0 is converted to internal label A on pieces converted using the Style Converter. The new line labels can also be selected in the piece plot and marker plot parameter tables using drop down selections for labels 100- 254
Page 10 of 21 4/28/2004
Page 11 of 21 4/28/2004
Page 12 of 21 4/28/2004
Marker Making
Auto process for Marker Plot and Cut generation is now active inside marker making. Set the Process Preferences in AM-Explorer to Auto process and generate a marker plot or cut file directly to the desired location
Page 13 of 21 4/28/2004
Attach Marker
This modified function allows now to attach markers of different widths.
Marker Import
MicroMark marker import will now import up to 99 notch types.
Page 14 of 21 4/28/2004
AutoMark
In AutoMark, it is now possible to have the marker report and the marker layout printed on the same page.
Page 15 of 21 4/28/2004
Cut Generation
Added back missing functionality of exporting cut data to a dos file format 8.3 using the - as identifier of the dot. This new cut option has been added in the form of a check box labeled "DOS Format for Export Cut File" in the Cut Options dialog box. When using this function do NOT check the SAVE box on the cut generation form. When checked, the input marker file name will be converted to a DOS style 8.3 filename that will be used to name the cut file. The method used to create the cut file name is identical to the method used in the old System Management. Note that if a DOS Extension is also specified in Cut Options, the new cut filename will be created and then the specified file extension will replace the newly created file extension.
Batch Processing
Added the ability to use function key F2 to open the annotation editor, p-markerplot and p-cutter tables from the Batch parameter table.
Page 16 of 21 4/28/2004
Rename Utility
Save as with Components now renames the pieces on the options page that match the main page of the model editor. Renaming will only occur if the piece has been renamed on the first page. Any other pieces in the options will not be affected. For example, if piece ladiesfront is renamed to womensfront and an option uses ladiesfront and a piece lapel, only the ladiesfront piece would be renamed.
Backups
Backups can now be scheduled to run more than once during the week. Previously you could only schedule the backup to run one day of the week. Backups will also include the user id information.
SQL
The new User Id history feature has been implemented for SQL/MSDE storage areas. It will use the System User Id of whom you are logged into the system. Example: <ccc\username>.
Page 17 of 21 4/28/2004
Page 18 of 21 4/28/2004
Page 19 of 21 4/28/2004
When converting Styles to Models using the Style Converter utility, the utility will report an error message that the size names are too long and will not save the data. In such cases, the sizes should be renamed in the appropriate MicroMark tables. When converting single styles by retrieving and saving in Pattern Design, the following steps are recommended: 1. Retrieve Style 2. Save As Model (System will prompt that size names are too long) 3. Place all pieces into the workarea and select Grade\Edit Size Line\Rename Size 4. Select All pieces in the workarea and rename sizes as needed so that all sizes are six characters or less. 5. Save the Style as an AccuMark Model Note: rename cannot be used on MicroMark data until after you have attempted to save it as AccuMark. This is to maintain the integrity of the MicroMark data.
Page 20 of 21 4/28/2004
If Yes is selected, then the Copy Model function will continue. If No is selected, then you will return to the rename dialog and the destination pieces that have not been renamed will be highlighted and may be edited.
This new message prevents users from accidentally changing the model name without changing the piece names and helps to make sure that the same piece is not referenced by multiple models unless the user specifically intends to do that.
Page 21 of 21 4/28/2004