Академический Документы
Профессиональный Документы
Культура Документы
ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, P. R. China 518057 Tel: (86) 755 26771900 800-9830-9830 Fax: (86) 755 26772236 URL: http://support.zte.com.cn E-mail: doc@zte.com.cn
LEGAL INFORMATION Copyright 2006 ZTE CORPORATION. The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations. All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their respective owners. This document is provided as is, and all express, implied, or statutory warranties, representations or conditions are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose, title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the use of or reliance on the information contained herein. ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subject matter of this document. Except as expressly provided in any written license between ZTE CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter herein. ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice. Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information. The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History Date Jan. 30, 2008 Revision No. R1.0 Serial No. sjzl20080261 Reason for Issue First edition
Intelligibility: (Language, Vocabulary, Readability & Clarity, Technical Accuracy, Content) Good Fair Average Poor Bad N/A Please check the suggestions which you feel can improve this documentation: Improve the overview/introduction Improve the Contents Improve the organization Include more figures Your suggestions for improvement of this documentation Add more examples Add more detail Other suggestions __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ # Please feel free to write any comments on an attached sheet. If you wish to be contacted regarding your comments, please complete the following: Name Postcode Telephone Company Address E-mail Make it more concise/brief Add more step-by-step procedures/tutorials Add more troubleshooting information Make it less technical Add more/better quick reference aids Improve the index
Contents
About This Manual ............................................................ i
Purpose ................................................................................ i Intended Audience ................................................................. i Prerequisite Skill and Knowledge .............................................. i What is in This Manual ............................................................ i Related Documentation.......................................................... ii Conventions ......................................................................... ii How to Get in Touch............................................................. iii
SCCP GT Translation is Error .................................................. 7 NID is Unequipped................................................................ 8 NID Translation of NID Failed ................................................. 8 ISNI Constrained Route Repeat .............................................. 8 ISNI cannot Support Route Indicator....................................... 9 NID Identify Failure .............................................................. 9 Registers Successfully ........................................................... 9 Registration Defeat............................................................... 9 Failed to Configure Multi-channel Controller ............................10 Failed to Configure Digital Switch Chip ...................................10 Failed to Get Config Information from Database.......................10 SUA GT Translation Failed.....................................................11 SIG_IPI Transmits Packets Abnormal .....................................11 IP Fail to Get Route Table Head or Entry .................................11 Deletion Static Routing Clause defeat .....................................12 IP Create or Enable IFB Fail ..................................................12 EPU down...........................................................................12 EPU Remove.......................................................................13 IP OPR Static RTE Fail: Add SRTE. .........................................13 TCP Received RST Packet .....................................................13 PPP Detect Wrong While Receive UidIpInfoAck.........................13 PPP Detect Wrong While Receive BSCIP from DB......................14 PPP Detect Wrong While Receive UID UPD Config from DB.........14 Failed to Initialize PCM7389 ..................................................14 The Configuration Data about UID/HDLC Received by LDM from Database Error ...................................................................15 Configure Port Failed ...........................................................15 Creat Inner (Inter) Unilateral (Bi-Directional) Connection (Multi) PVC Failed..........................................................................16 Delete Inner (Inter) Unilateral (Bi-Directional) Connection (Multi) PVC Failed..........................................................................17 IMA Group Related Operation Failed .......................................17 IMA Link Related Operation Failed..........................................17 SFrame Mode Error is Serious ...............................................18 CFrame is doffed Because of Horizontal Check Error .................18 CFrame is doffed because of Vertical ......................................18 Cframe is doffed because of not Integrity................................19 Cframe is doffed because It is not Valid ..................................19 Cframe is Losted because of its Length is not Valid...................19 Frame is Losted because of out of Order .................................20
Frame is Losted because of CRC Check Error........................... 20 Configuration IXP2400 Failed ................................................ 20 Configuration VSC872 Failed................................................. 21 Aps Switch......................................................................... 21 L2FWDTBL Init Fail.............................................................. 22 L2FWDTBL Init UIM Media eth Fail ......................................... 22 Brs Main Configure Request Timeout...................................... 22 Brs Main RPU Register Timeout ............................................. 23 Brs Protocol Process Power-on Fatal Failed.............................. 23 IP OFFLINE SET: Add Interface Address Failed ........................ 23 IP OFFLINE SET: Set DB Failed ............................................. 24 IP OFFLINE SET: Delete the IP Address Failed ......................... 24 IP OFFLINE SET: Add IP Route Failed ..................................... 24 IP OFFLINE SET: Delete Route Failed ..................................... 25 IP OFFLINE SET: Not Ethernet Interface ................................. 25 IP OFFLINE SET: a Same Prefix IP Address Exist...................... 25 IP OFFLINE SET: The Input Parameter is Null .......................... 25 IP OFFLINE Cfg: The IP Address Already Exists........................ 26 IP Offline Cfg: The IP Address Already Exists .......................... 26 Invalid Mask or Prefix .......................................................... 26 ARP Allocate Memory Instance Fail ........................................ 27 ARP Allocate Memory Fail for ARP Cache................................. 27 IP Address Collided with the Others ....................................... 27 Found Duplicate MAC Address in the ARP Packet...................... 27 RIP Configure Neighbor Fail .................................................. 28 RIP Interface Authentication Fail ........................................... 28 RIP Interface is Disabling ..................................................... 28 RIP Interface is Enabling ...................................................... 29 The Router Id in the HELLO Package which OSPF Received is same as the Router id of this ........................................................ 29 OSPF Virtual Interface Configure in Error ................................ 29 OSPF Interface Configure in Error.......................................... 30 OSPF Virtual Interface Authentication Fail ............................... 30 OSPF Interface authentication Fail ......................................... 30 Create BGP Instance Fail...................................................... 31 BGP Create Neighbor Fail ..................................................... 31 BGP Cant Get TCB for Passive Listen ..................................... 31 BGP Cant Get TCB for Active Connect.................................... 32 BGP Enable Passive Listen TCB Fail ........................................ 32
BGP Enable Active Connect TCB Fail .......................................32 BGP Add Neighbor to Group Fail ............................................32 BGP Interface is Down, and Neighbor Disconnects....................33 BGP Interface Address Changed, and Neighbor Disconnects.......33 BGP Neighbor Read Receive Buffer Fail ...................................33 BGP Neighbor Hold Timer Expired ..........................................34 Courier Create BGP Instance Fail ...........................................34 Courier Enable OSPF by the RTR_ID Fail .................................34 Courier Synch IP Route Table Error ........................................35 MAC Addreses Conflict While Computing or Deleting It..............35 Alarm Pool is Over in OAM Alarm Manager Process ...................35 OAM Agent Receive Refuse Alarm Inform ................................36 Board Self-Checking Defeat ..................................................36 Board Initialization Defeat ....................................................36 Half Fixedly Connection Configuration Data is Error ..................37 Powering Information about Basic Process ..............................37 Base Invalid Reason Changed ...............................................37 Fail to Reset MSCe...............................................................38 Fail to Reset Circuit in MSCe .................................................38 Block CIC Failed ..................................................................38 Unblock CIC Failed ..............................................................38 Fail to Use Termination ........................................................38 BCM Long Bill .....................................................................39 IUA Receives the Notify Message ...........................................39 IUA Receives Error Message..................................................39 Base Station Erase ..............................................................39 The Process is in the Dead Lock State ....................................40
SSCS no Response .............................................................. 43 M2PA Link is Congested ....................................................... 44 M2PA Processor is Outage .................................................... 44 Inform of the Change of ASP Status....................................... 44 Inform of the Change of AS Status ........................................ 45 Receiving ERROR Message ................................................... 45 Receiving NTFY Message ...................................................... 45 Association Establish Fail...................................................... 45 INFORM_MCS_2400_CONFIGERROR ...................................... 46 Configuration Data Received from Database is Abnormal or Error Happened when Updating Configuration Data.......................... 47 The NP C5 can't Get PVC from DBS or the PVC can't be Configured in C5's TLU ........................................................................ 48 The NP C5 Received AAL2 Establishing/Release Message, but C5 Operation Failed ................................................................. 48 Registers Successfully ......................................................... 49 IP Has no Match EPU Global Port ........................................... 49 ABPM board's PMC7389 is Reset............................................ 49 IP OFFLINE SET: The Interface is not Exist or is not an Ethernet Interface ........................................................................... 50 IP OFFLINE SET: No IP Unnumbered First ............................... 50 IP OFFLINE SET: Invalid Host Address.................................... 50 IP OFFLINE SET: Invalid Next Hop ......................................... 51 IP OFFLINE SET: Inconsistent Address and Mask ..................... 51 IP OFFLINE SET: No Matching Route to Delete ........................ 51 IP OFFLINE SET: Next Hop Conflict ........................................ 51 IP OFFLINE SET: Next Hop not Directed ................................. 52 IP OFFLINE SET: IP Address not Exists ................................... 52 IP OFFLINE SET: MAC beyond Valid Space .............................. 52 IP OFFLINE SET: DB MAC Operation-Type Invalid .................... 53 IP OFFLINE SET: Invalid IP Broadcast Address ........................ 53 IP OFFLINE SET: The Number of IP Address on this Port cannot Exceed 4 ........................................................................... 53 OSPF Virtual Link State Changed ........................................... 53 OSPF Interface State Changed .............................................. 54 OSPF Virtual Neighbor State Change ...................................... 54 OSPF Neighbor State Change................................................ 54 LSDB Overflow ................................................................... 55 OSPF Found LSAs with Same lS_ID........................................ 55 BGP Neighbors FSM Error .................................................... 55 BGP State Change............................................................... 56
Half-Fixed Connection is Changed Abnormally .........................56 Disk is Full .........................................................................56 GE Port Config not Match......................................................57 UIM CS Changeover.............................................................57 Master and Slave Change over ..............................................57 FE Port State Change from Up state to Down...........................58 UIM TFS Port State Change...................................................58 Board's Workmode is not Supported.......................................58 CLK Base Change ................................................................59 CLKG Frequence Base Quality Changed ..................................59 CLKG Work Mode Changed ...................................................59 Circuit is not Set Up in MSCe.................................................60 OMP Restart .......................................................................60 Exception of CPU Loop .........................................................60 Tone DSP CPU and DSP Version Differ ....................................60 HP Server Power Supply Power off .........................................61 ABPM Board's PMC7389 is Reset ............................................61 HP Server Power Supply Power ON ........................................61 Alarm When Data Configuration MNIC/2 Physical Board-related is Error .................................................................................61 Error Occurs During MCU Running..........................................62 Timer for ISIS Creates Fail ...................................................62 ISIS Hello Packet Authentication Fail ......................................62 ISIS LSP Packet Authentication Fail........................................62 ISIS SNP Packet Authentication Fail .......................................63 Ignored Packet for Differ Interface Version..............................63 Stack Overflow ...................................................................63 Configure BFD Session Fails ..................................................63 Ec of Index Configed as Signal Link be Informed Enable............64 Tone File System Initialization Failure.....................................64 Setting Work Mode of Outport is Forbid in This Board ...............64 Multi-CPU Board ,Unittype in R_unit is Inconsistent with FirstCPU's Functype in R_CPUVERMAPE ........................................64 DBS Power on Fail ...............................................................65 User Office of M3UA States Modify Inform ...............................65 RIP Failed to Create RIP Instance ..........................................65 OSPFV3 Routerid Conflict......................................................66 OSPFV3 Virtual Interface State Change...................................66 OSPFV3 Interface State Change ............................................66 OSPFV3 Virtual Interface Configure Error ................................66
OSPFV3 Interface Configure Error.......................................... 67 OSPFV3 Virtual Neighbor State Change .................................. 67 OSPFV3 Neighbor State Change ............................................ 67 OSPFV3 Routerid Invalid ...................................................... 67 OSPFV3 Instance Create Failure ............................................ 68 80G Chip Error ................................................................... 68 CS Fiber Change Over ......................................................... 68 Switch Version Fail .............................................................. 68 OMP Version Check Infomation ............................................. 69 DBS MALLOC Memory Fail .................................................... 69 RIPng Interface is Disable .................................................... 69 RIPng Failed to Create RIP Instance....................................... 69 LAN91 Error ....................................................................... 70 Some HSSLS are Out of Sync ............................................... 70 IP OFFLINE SET: NO IP Unnumbered First .............................. 70
Appendix A ..................................................................... 73 Abbreviations ................................................................. 73 Appendix B ..................................................................... 79 Collection of Notification Information........................... 79 Tables ............................................................................. 87 Index .............................................................................. 89
Intended Audience
This manual is intended for engineers and technicians who perform operations on ZXC10 MGW cdma2000 Media Gateway.
Summary Introduces mechanism and general flow for handling alarms. Provides notification information, including alarm code, alarm name, handling methods, etc.
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Related Documentation
The following documentation is related to this manual: ZXC10 MGW cdma2000 Media Gateway System Description ZXC10 MGW cdma2000 Media Gateway User Guide ZXC10 MGW Instruction cdma2000 Media Gateway Operating
ZXC10 MGW cdma2000 Media Gateway Alarm Monitoring ZXC10 MGW cdma2000 Media Gateway Configuration
Conventions
Typographical Conventions ZTE documents employ the following typographical conventions.
TABLE 2 TYPOGRAPHICAL CONVENTIONS
Meaning References to other Manuals and documents. Links on screens. Menus, menu options, function names, input fields, radio button names, check boxes, dropdown lists, dialog box names, window names. Keys on the keyboard and buttons on screens and company name. Text that you type, program code, files and directory names, and function names. Optional parameters. Mandatory parameters. Select one of the parameters that are delimited by it.
Meaning Refers to clicking the primary mouse button (usually the left mouse button) once. Refers to quickly clicking the primary mouse button (usually the left mouse button) twice. Refers to clicking the secondary mouse button (usually the right mouse button) once. Refers to pressing and holding a mouse button and moving the mouse.
ii
iii
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
iv
Chapter
General Concept
Overview
Description Notification management system implements centralized monitoring on the running status of the whole system. The system collects in real time abnormal information of each part, e.g. each board, link, database, server, and other necessary units. When a notification occurs, the notification management system generates notification message to inform the maintenance engineer about the occurred event. So it is easy for the engineers to hsndle that event to ensure the stability of the system.
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Chapter
Notification Information
Overview
Description Notification information classifications: is divided into the following Handling error-related notification information Device-related notification information Communication-related notification information Service quality-related notification information Environment-related notification information Content A collection of notification information listed in ascending sequence of notification codes is provided in Appendix B Collection of Notification Informationat the end of the manual.
Handling
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Handling
MP to PP Sync Failure
Notification Information Notification information has the following contents: Notification code: 8003 Notification description: The data synchronization from the MP to PP fails. Cause Handling The MP synchronizes data to the PP. The PP gives a notification message, and the data synchronization failed. Handle the notification referring to the following operations: Check the data configuration. Check the link status between the MP board and PP board.
Handling
Handling
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
If the Times of Sending Message go beyond the Limit, OAM Back Receives Notification Information about the Message
Notification Information Notification information has the following contents: Notification code: 8006 Notification description: If the notification for the data configuration modification (P_notify process) fails three time, this notification occurs. Influence Cause Handling The data in the database is inconsistent with the board or module which the destination process dwells on. If the notification for the data configuration modification (P_notify process) fails three time the target unit is abnormal. Check target unit status, or the manual data synchronization is necessary.
Save File Fail in Master or Slave Path, Inform with Failed Path
Notification Information Notification information has the following contents: Notification code: 8007 Notification description: The data saving in one of the active and the standby directories fails. The additional message contains the path of saving failure. Influence Cause The board can not get right data from ZDB in disk after the board reboots. The notification occurs due to the following causes: The disk is full. The media is faulty. Handling Handle the notification referring to the following operations: If the disk is full, clear up the disk to create enough available space. If the disk is faulty, maintain or replace it.
Loading Version-Table from File-Reg is Fail because of Nonexistent Domain or Incompatible Domain Type
Notification Information Notification information has the following contents: Notification code: 8008 Notification description: Tthe board memory version table has newly-added fields or type-incompatible fields as compared to ZDB, which causes failure in loading the version table records. Influence Cause The old records in version table and RELEASE files could be lost. if the new version has newly-added fields or type-incompatible fields while OMP loads the new version, and, the version table should cant be loaded. This phenomenon is normal during the version upgrade. Use the latest background version tool to re-configure the version data.
Handling
Handling
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
The GT number indicator is incorrect. The corresponding subsystem of the called GT number is unavailable. The corresponding signaling point of the called GT number is inaccessible. The called GT number is not configured in the database. Handling Check the GT configuration, or the statuses of the office direction and the subsystems.
NID is Unequipped
Notification Information Notification information has the following contents: Notification code: 10305 Notification description: NID not configured. Cause Handling When the NID is translated, it is not configured in the database. Correctly configure the NID in the database.
Registers Successfully
Notification Information Notification information has the following contents: Notification code: 10822 Notification description: The MGW has been registered. Cause Handling The MGW has been registered. No special processing is required.
Registration Defeat
Notification Information Notification information has the following contents: Notification code: 10823 Notification description: The MGW is not registered in the MGC . Influence Cause Handling Calls can not be initiated. The system is just powered on, the office direction inaccessible, or there is an error in the configuration. Check the SERVER and the MGW configurations.
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
10
11
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Cause Handling
It is failed to get the route table head due to wrong configuration parameters. Handle the notification referring to the following operations: Configure route information again. Check whether the configured route parameters are correct.
EPU down
Notification Information Notification information has the following contents: Notification code: 17990 Notification description: The RPU receives the message of EPU port down reported by the SCS. Cause Handling The RPU receives the message of EPU port down reported by the SCS. Check the status of the reported board.
12
EPU Remove
Notification Information Notification information has the following contents: Notification code: 17991 Notification description: The RPU receives the message reported by the SCS that the EPU board has been deleted. Influence Cause Handling Precaution Protocol stack information of this board could be cleared. The RPU receives the message that the EPU board has been deleted. Check whether the board has been correctly deleted. This notification may clear all the protocol stack messages on the board.
13
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Notification description: PPP detects wrong information while applying UID IP from the database. Influence Cause Handling Powering on protocol stack process fails. The database configuration is not correct. Re-configure UID IP.
14
The Configuration Data about UID/HDLC Received by LDM from Database Error
Notification Information The notification information has the following contents: Notification code: 18753 Notification description: UID/HDLC configuration in database is incorrect. Cause Accessing the database timeout is usually caused by message loss due to the broken communication link, or the database configuration error may lead to this notification. Newly configured data is unavailable. Handle the notification referring to the following actions: Check the the broken communication link. Ask SCS to diagnose this fault. If the database configuration has error, check the background data, and then check foreground data in OMP is correct through probe.
Influence Handling
15
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Confirm the MAXVPI and the MAXVCI values are legal. The values must be nth power of 2 on IMAB and APBE. For the MAXVCI, 6=<N<=14; for the MAXVPI on the UNI port, 1=<N<=8; for the MAXVPI on the NNI port, 1=<N<=9. Confirm that the number of PVCs of the whole board does not exceed 62K after configuring this port.
The VCI value must be greater than or equal to 32. Confirm that the PVC-related port configuration is correct and that the VPI and the VCI of the PVC do not exceed the MAXVPI and the MAXVCI of the port respectively.
16
Confirm that the service type mismatches with the flow type. Confirm that the to-be-created PVC does not exist.
17
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Cause Handling
In general, the reason is that the link parameters are incorrect when the operations are initiated. Handle the notification referring to the followings: Check whether the parameters related with the initiated operations are correct. Check whether the steps in the operations are legal.
18
Cause Handling
Maybe there is a problem in the 872 chip. If the notification continuously occurs several times, restart the board.
19
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
The system may discard some packets. Maybe there is a problem in the 872 chip. If the notification continuously occurs several times, restart the board.
20
Cause Handling
Aps Switch
Notification Information The notification information has the following contents: Notification code: 19777 Notification description: Aps switchover occurs. Cause There are IOS notifications in the optical interface: The ENUM is lighted The clock is lost The HW and the FE are broken The opposite end initiates switchover The background initiates the forcible switchover. Handling If it can be judged from the additional information that the switchover is from the protective board to the working board, check the flowing two cases of the working board. If the switchover is from the working board to the protective board, check the status of the protective board. Switchover success: Check whether the following : Check IOS notifications in the optical interface Check the ENUM light Check the clock Check the HW and the FE Check the opposite end initiates switchover background initiates the forcible switchover. Switchover failure: the
21
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Check whether the standby board is reset Whether the ABPE board is halted Whether the background initiates the forcible switchover due to hardware problem in the APBE board
Handling
22
23
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
24
25
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Notification description: IP offline configuration: parameter imported from the DB is null. Cause Handling
The
The parameter imported from the DB is null due to configuration exception. Check whether the configuration operation is correct.
26
Handling
27
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Notification description: In the received ARP message, the source MAC address is same with that of the interface receiving the ARP message. Cause Handling The MAC address of this network is same with other MAC address in the associated network. Modify the duplicated MAC addresses.
Check the address of the interface and re-configure the RIP neighbor. Due to this notification static rout to eh neighbor cannot be created.
28
The Router Id in the HELLO Package which OSPF Received is same as the Router id of this
Notification Information Notification information has the following contentss: Notification code: 21312 Notification description: The router ID in the Hello package received is same as the ID of this router. Cause Influence Handling The router ID in the Hello package received is same as the ID of this router. The relation of OSPF with the adjacent office has some exception. Modify the IP address of the interface, and further modify the router ID.
29
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
The two routers couldnt establish adjacency relation. The the authentication information configuration is incorrect or has some wrong parameters in interface configuration. Check the authentication item of the interface configuration.
30
31
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
32
Notification description: The BGP Failed to add a neighbor to the group. Cause Handling BGP failed to create a group; BGP failed to enable a group due error in BGP configuration. Check the BGP configuration.
33
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Handling
Use the packet capture tool to check the received BGP message.
34
Handling
35
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
36
37
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
38
Handling
39
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Device Notification
Description This section introduces the following notifications:
Trunk slip
Notification Information Notification information has the following contents: Notification code: 576 Notification information: E1 trunk slip. Influence Cause Handling Trunk data service or signaling channel fault The E1 slips. Check there is frequency difference between the clock of the E1 line and the local receiving clock.
Global Underflow
Notification Information Notification information has the following contents: Notification code: 832 Notification information: MCC underflow. Influence Cause Handling No channel can transmit or receive data. The MCC encounters underflow. Pull out the board to totally discharge it for 5s, and then plug it again.
40
Global Overflow
Notification Information Notification information has the following contents: Notification code: 833 Notification description: MCC overflow. Influence Cause Handling No channel can transmit or receive data. The MCC encounters overflow. Pull out the board to totally discharge it for 5s, and then plug it again.
41
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Cause
No 485 response is received when setting the related parameters of the CLKG, TFI and PWRD due to connection line probolem. Check whether the 485 connection line is correct.
Handling
42
The causes for this notification may include: The standby OMP board is not in the availabe or has some errors, and the synchronization cannot be performed. The version synchronization is finished.
Handling
Check there are the corresponding files on the hard disks of the active and the standby boards. Contact the related person to perform further processing.
SSCS no Response
Notification Information Notification information has the following contents: Notification code: 10560 Notification description: There is no message response in the SSCS link for a long time. Influence Cause The link does not work. There is no message response in the SSCS link for a long time, because of physical layer problem.
43
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Handling
Check whether the physical link (such as optical interface and optical fiber) is fine.
44
Cause Handling
45
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Check the physical link. Check each configuration item of the association.
INFORM_MCS_2400_CONFIGERR OR
Notification Information Notification information has the following contents: Notification code: 15936 Notification description: Error in the 2400 configuration data returned from the database. Cause The causes leading to this notification may include: The data in the message body returned from the database is empty. The number of the returned records exceeds the limit of the table. There are errors in the data configuration of the dispatching weight value table. There are errors in data of the slot VOQ mapping table. There are errors in data of the simple QOS mapping relation table. There are errors in data of the system QOS mapping relation table. The returned data do not conform to the actual situation. Handling Handle the notification referring to the following operations: Check the response message returned from the database to confirm that the table data is not empty. Check the response message from the database to confirm that the number of the returned table items does not exceed the total number of the table items. Check the records in the dispatching weight value table in the database to confirm whether there is any error in record configuration. Check the records in the slot VOQ mapping table in the database to confirm whether there is any error in record configuration. Check the records in the simple QOS mapping relation table in the database to confirm whether there is any error in record configuration. Check the records in the system QOS mapping relation table in the database to confirm whether there is any error in record configuration.
46
Check the response message returned from the database to confirm that the table name field (ucTableNo) is one of the four tables in the request.
Configuration Data Received from Database is Abnormal or Error Happened when Updating Configuration Data
Notification Information Notification information has the following contents: Notification code: 16192 Notification description: Exception in the configuration data returned from the database or error in configuration data update. Influence Cause Handling Board function failure There are errors in the configuration data. Adopt different steps according to different number of the additional information. Check the lawful distribution configuration message imported from the database is correct. Check the IPLINK configuration message imported from the database is correct. Check the SCTP distribution configuration message imported from the database is correct. Check the IP of the control interface imported from the protocol stack is 0; check whether the control interface has 4 IP addresses; check the MTU imported from the protocol stack is 0. Check the HDLC configuration; check whether the HDLC configuration message imported from the database is correct. Check the BTS2BCTMP module configuration; check whether the BTS2BCTMP module configuration message imported from the database is correct. Check the OSI signaling distribution table; check whether the OSI signaling distribution configuration message imported from the database is correct. Check the OSI network management Port configuration; check whether the OSI network management Port configuration message imported from the database is correct. Check the exception duration threshold setting; check whether the exception duration threshold configuration message imported from the database is correct.
47
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Check the IPI internal forwarding table; check whether the IPI internal forwarding table configuration message imported from the database is correct. Check VIG configuration database is correct. message imported from the
Restart the board, and check whether the association configuration, network connection and the equipment on the opposite end are normal.
The NP C5 can't Get PVC from DBS or the PVC can't be Configured in C5's TLU
Notification Information Notification information has the following contents: Notification code: 16448 Notification description: There is an error in configuring the PVC of the C5 microcode module. Cause The causes leading to this notification may include: Failed to get the valid PVC from the database The PVC service type is wrong (because there is an error in configuring the data). The PVC direction is wrong (because there is an error in configuring the data). The PVC flow is not correctly set in the table operations. Failed to add PVC table items in the table operations. Failed to delete PVC table items in the table operations. The pointer of the configuration message is empty. Handling Check whether the MP database table R_ATM_PVC is correctly configured and whether the APBE board works normally. Check the additional reason.
48
Cause
Causes leading to this notification include: Failed to add AAL2 link table items in the table operations (that seldom happens). Failed to delete AAL2 links in the table operations (that seldom happens). The pointer of the configuration message is empty (that seldom happens).
Handling
Registers Successfully
Notification Information Notification information has the following contents: Notification code: 10822 Notification description: The MGW has been registered. Cause Handling The MGW has been registered. No special processing is required.
49
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
The interface does not exist or is damages. Check the configured parameters are correct according to the notification reason.
50
51
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Notification description: IP offline configuration: Next hop conflict. Influence Cause Handling The static route is invalid. The next hop conflicts with current first one. Check whether the configured parameters are correct.
52
IP address conflict because interface can configured maximum of four IP addresses. Check whether the configured parameters are correct.
53
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Notification code: 21315 Notification description: The status of the OSPF virtual interface is changed. Influence Cause Handling The virtual link couldnt work if its state is down. The status of the virtual link is changed. Check the physical link of the virtual link and the configuration parameters of the virtual interface.
The status of the neighbor on the opposite end of the virtual link is changed. Check the physical link and the configuration parameters of the virtual link.
54
down,
database
can
not
be
The status of the neighbor of the interface is changed. Check the physical link and the configuration parameters of the neighbor.
LSDB Overflow
Notification Information Notification information has the following contents: Notification code: 21329 Notification description: The LSDB (Link Status DataBase) overflows. Cause Handling The LSDB overflows of itself or receiving lots of LSAs flooding from the neighbor causes that the LSDB overflows. Configure route aggregation to reduce the number of LSAs.
55
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
TDM channel transient interruption The causes for this notification include: The line clock of the frame where this board is located jitters. There is a hardware fault in the switching chip of this board.
Handling
Handle the notification referring to the following operations: Check the clock source to see whether the indicator on the CLKG panel providing the clock to this board is in the CATCH status. At the same time, input the command SCSShowRTData through telnet to see the BOARD Clock Status in the lost status in the printed debugging information. Replace the connection chip of this board.
Disk is Full
Notification Information Notification information has the following contents: Notification code: 3136 Notification description: The disk is full. Cause When a process performs the file operation, the free space of the disk is not enough for this file operation. In this case, the notification is sent to the OAM agent. The frequency of this Notification depends on how often the operation file of the platform interface is invoked.
56
Handling
Check the GLI optical interface connection relation on the background, and modify the fiber connection according to the configuration.
UIM CS Changeover
Notification Information Notification information has the following contents: Notification code: 5188 Notification description: The big T-net of the UIM switches over. Cause Handling The CS domain of the UIM switches over. Check the reason why the CS domain of the UIM switches over through the CS active/standby indicator on the board panel.
57
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
58
Such reasons as FPGA not loading cause that there are errors in setting the working mode for the board. Handling Handle the notification according to the following operations: Check the background configuration, and it is required to configure the working mode the board supports. Use TestMenu to check whether the FPGA loading is normal. Power on the board again.
59
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
OMP Restart
Notification Information Notification information has the following contents: Notification code: 50331712. Notification description: OMP restarts. Cause Handling OMP system restarts automatically. Observe the relevant alarms and notifications while restart of the system and clear the fault.
60
61
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
62
Stack Overflow
Notification Information Notification information has the following contents: Notification code: 2624. Notification description: Stack Overflow. Cause Handling Stack Overflow. Increase stacks size.
63
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
64
Notification description: Multi-cpu board, unittype in r_unit is inconsistent with first-cpu's functype in r_cpuvermap. Cause Handling Multi-cpu board, unittype in r_unit is inconsistent with first-cpu's functype in r_cpuvermap. Please configure it again.
65
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
OSPFV3 virtual interface state change. Check for the physical connection and configuration.
66
Handling
Check for the hello interval, dead interval and option parameter on the interface.
Check for the hello interval, dead interval and option parameter on the interface.
OSPFV3 virtual link neighbor state changed. Check for the physical connection and configuration.
67
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Handling
2. Check GUIM Board Fiber Port Act Light 3. Check 5191 Inform.
68
69
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
LAN91 Error
Notification Information Notification information has the following contents: Notification code: 26692. Notification description: LAN91 Error. Cause Handling LAN91 Error. Re-Initialize LAN91 chip.
Communication Notification
Description This section introduces the following notifications:
70
Notification description: The trunk configuration inconsistent with the function of the board. Influence Cause Handling The board resets automatically.
is
The data configuration is incorrect or the board is incorrectly inserted. Check the data configuration of the trunk board, or replace the board.
71
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
72
Appendix
Abbreviations
Abbreviation 1X EV 1X EV-DO 1X EV-DV 3G 3GPP2 AAA APGW API ATM BCSN BCTC BER BPSN BS BSC BSS BTS BUSN CACH CAS CBC CCS CDMA CF CFB CFBI Full Name 1X Evolution 1X Evolution Data Only 1X Evolution Data & Voice The third generation mobile communications 3rd Generation Partnership Project 2 Access, Authorization, and Accounting Access Point Gateway Application Programming Interface Asynchronous Transfer Mode Backplane of Circuit Switch Network Backplane of ConTrol Center Bit Error Ratio Backplane of Packet Switch Network Base Station Base Station Controller Base Station System Base Transceiver Station Backplane of Universal Switch Network Common AsSIGnment Channel Channel Associated SIGnaling Cell broadcast center Common Channel SIGnaling Code Division MultIPle Access all Call Forwarding services Call Forward Busy Central Fiber Bus Interface
73
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Abbreviation CFD CFNA CFNRc CFNRy CFU CIC CKCD CLKG CNIP CNIR CP CPM CPSN CRC CSM DPC DTB DTI DTU ESME FDMA FEP FN FPGA FTAM FTP GIF GMSCe GPRS GSM GT GUI HDLC HLRe HTML HTTP
Full Name Call Forward Default Call Forward No Answer Call Forward No Reachable Call Forward No Reply Call Forward Unconditional Circuit IDentification Code Central Clock and Communication Driver CLOCK Generator Call Number IDentification Presentation Call Number IDentification Restriction Content ProvIDer Common SIGnaling Process Module Central Power Switching Network Cyclic redundancy check Central Switching Module Destination SIGnaling Point Code Digital Trunk Board Digital Trunk Interface Digital Trunk Unit External Short Message Entity Frequency Division MultIPle Access Front-End Processor Fleet Number Field Programmable Gate Array File transfer access management File Transfer Protocol Graphics Interchange Format Gateway MSCe General Packet Radio Service Global System for Mobile communications Global Title Graphical User Interface High level data link control Home Location Register emulator Hyper Text MakeUP Language Hypertext Transfer Protocol
74
Appendix A Abbreviations
Abbreviation HW I/O IMSI IPI IRM ISDN ISO ISUP ISUP IWF kbps LMSD MC MDN MGW MIN MNC MNIC MPB MS MSCe MSID MSS MTP MTP1 MTP2 MTP3 NGN NMC NMS OMC OMM OPC OTA PDA PDN
Full Name High speed data Way Input/Output International Mobile Subscriber IDentity IP bearer Interface International Roaming MIN Integrated Service Digital Network International Standardization Organization ISDN User Part ISDN User Protocol InterWorking Function kilo-bits per second Legacy Mobile Station Domain Message Center Mobile Data Number Media Gateway Mobile Station IDentify Number Mobile Network Code Multi-service Network Interface Card Main Processing Board Mobile Station Mobile Switching Center emulator Mobile Station IDentifier Mobile Switching System Message Transfer Part Message Transfer Part-layer 1 Message Transfer Part-layer 2 Message Transfer Part-layer 3 Next Generation Network Network Management Center Network Management Subsystem Operations & Maintenance Center Operation Maintenance Module Originating SIGnaling Point Code Over The Air Personal Digital Assistant Packet Data Network
75
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Abbreviation PDSN PDSS PN PPP PPPoE PSN PSPDN PSTN PTT PWRD RADIUS RAID SC SCCP SCP SCPe SDH SDTB SGW SID SIO SIPI SLS SME SMG SMPP SMS SMTP SNM SNMP SOAP SP SPB STM TDMA TLDN
Full Name Packet Data Serving Node Packet Data Switching System Personal Number Point to Point Protocol Point to Point Protocol over Ethernet Packet Switch Network Packet Switched Public Data Network Public Switched Telephone Network Push-To-Talk POWER Distributor Remote Authentication Dial In User Service Redundant Array of Independent Disks Short message Center SIGnaling connection control part Service control point Service Control Point emulator Synchronous Digital Hierarchy SONET Digital Trunk Board SIGnaling Gateway system IDentify Service Information Octet SIGnaling IP bearer Interface SIGnaling Link Selection Short Message Entity Short Message Gateway Short Message Peer-to-Peer protocol Short Message Service Simple Message Transfer Protocol Service Network Module Simple Network Management Protocol Simple Object Access Protocol Service ProvIDer SIGnaling Processing Board Synchronous Transfer Mode Time Division MultIPle Access Temporary Location Digital Number
76
Appendix A Abbreviations
Abbreviation UBC UIM VMSCe VPN WAP WDP WDSS WIN WVPN
Full Name all-User BroadCast User IDentity Module Visited MSCe Virtual Private Network Wireless Application Protocol Wireless Datagram Protocol Wireless Data Services System Wireless Intelligent Network Wireless Virtual Private Network
77
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
78
Appendix
Notification Name
P.No.
Trunk slip Global Underflow Global Overflow Board Abnormally Resets Stack Overflow The Process is in the Dead Lock Exception of CPU Loop Disk is Full GE Port Config not Match UIM CS Changeover Master and Slave Change over FE Port State Change from Up state to Down UIM TFS Port State Change Board's Workmode is not Supported Powering Information about Basic Process CS Fiber Change Over HSSL Break Off between GLI and PSN 485 Offline Set Fail DSP Runtime Error Backboard Switch Set Change
40 40 41 41 63 40 60 56 57
57 58 58 58 37 68 41 41 42 42
79
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Notifi cation Code 5702 5703 5705 5706 5707 5709 5956 5957 5958 5960 5961 8000 8001 8002 8003 8004 8005
Notification Name
P.No.
Work Mode Difference with DB Trunk Configuration Backboard Switch Set Change Error Occurs During MCU Setting Work Mode of Outport is Forbid in This Board Tone File System Initialization Failure Tone DSP CPU and DSP Version Differ Version Error Occur on This Board Doc Space is not Enough to Save Version-File IDE Files Synchronization Information Switch Version OMP Version Check DBs Table Load Failure Master to Slave Sync Failure OMP to MP Sync Failure MP to PP Sync Failure Failure of Saving One Table DBs File-Buffer Overflow If the Times of Sending Message go beyond the Limit, OAM Back Receives Notification Information about the Message Save File Fail in Master or Slave Path, Inform with Failed Path Loading Version-Table from File-Reg is Fail because of Nonexistent Domain or Incompatible Domain Type DBS Require Configuration Failed Multi-CPU Board ,Unittype in R_unit is Inconsistent with First-CPU's Functype in R_CPUVERMAPE DBS Power on DBS MALLOC Memory SCCP GT Translation is Error NID is Unequipped NID Translation of NID Failed ISNI Constrained Route
70 42 62 64 64 60 42 43 43 68 69 4 4 4 5 5 5
8006
8007
1 1 2 2 2 1 1 1 1
7 7 64 65 69 7 8 8 8
80
Notifi cation Code 10308 10309 10560 10822 10823 11328 11329 11330 11840 12608 13632 13633 13888 13889 13890 13891 14144 15936 16192 16193 16448
Notification Name
P.No.
ISNI cannot Support Route Indicator NID Identify Failure SSCS no Response Registers Registration Defeat Failed to Configure Multi-channel Controller Failed to Configure Digital Switch Chip Failed to Get Config Information from Database User Office of M3UA States Modify Inform SUA GT Translation Failed M2PA Link is Congested M2PA Processor is Outage Inform of the Change of ASP Status Inform of the Change of AS Status Receiving ERROR Message Receiving NTFY Message Association Establish Fail INFORM_MCS_2400_CONFIGERROR Configuration Data Received from Database is Abnormal or Error Happened when Updating Configuration Data SIG_IPI Transmits Packets Abnormal The NP C5 can't Get PVC from DBS or the PVC can't be Configured in C5's TLU The NP C5 Received AAL2 Establishing/Release Message, but C5 Operation Alarm When Data Configuration MNIC/2 Physical Board-related is IP Fail to Get Route Table Head or Entry Deletion Static Routing Clause defeat IP Has no Match EPU Global Port IP Create or Enable IFB Fail EPU down EPU Remove
9 9 43 9 9 10 10 10 65 11 44 44 44 45 45 45 45 46 47 11 48
16449
48
2 1 1 2 1 1 1
61 11 12 49 12 12 13
81
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Notifi cation Code 17992 18240 18241 18496 18497 18498 18752 18753 18754 18754 19008 19009
Notification Name
P.No.
IP OPR Static RTE Fail: Add SRTE. TCP Received RST Packet TCP Connection Aborted PPP Detect Wrong While Receive UidIpInfoAck PPP Detect Wrong While Receive BSCIP from DB PPP Detect Wrong While Receive UID UPD Config from DB Failed to Initialize The Configuration Data about UID/HDLC Received by LDM from Database Error ABPM board's PMC7389 is ABPM Board's PMC7389 is Configure Port Failed Creat Inner (Inter) Unilateral (BiDirectional) Connection (Multi) PVC Failed Delete Inner (Inter) Unilateral (BiDirectional) Connection (Multi) PVC Failed IMA Group Related Operation Failed IMA Link Related Operation Failed Some HSSLS are Out of SFrame Mode Error is Serious CFrame is doffed Because of Horizontal Check Error CFrame is doffed because of Vertical Cframe is doffed because of not Integrity Cframe is doffed because It is not Valid Cframe is Losted because of its Length is not Valid Frame is Losted because of out of Order Frame is Losted because of CRC Check Error Configuration IXP2400 Failed Configuration VSC872 Failed Aps Switch L2FWDTBL Init Fail
13 13 71 1314 14 14 14 15 49 61 15 16
1 1 1 2 1 2 2 2 1 1 1 1 1 1 1 1
19010 19264 19265 19520 19521 19522 19523 19524 19525 19526 19527 19528 19529 19530 19777 20032
17 17 17 70 18 18 18 19 19 19 20 20 20 21 21 22
82
Notifi cation Code 20033 20288 20289 20290 20544 20545 20545 20546 20547 20548 20549 20550 20553 20554 20555 20556 20557 20558 20559 20561 20562 20563 20564 20565 20566 20567
Notification Name
P.No.
L2FWDTBL Init UIM Media eth Fail Brs Main Configure Request Timeout Brs Main RPU Register Timeout Brs Protocol Process Power-on Fatal Failed IP OFFLINE SET: The Interface is not Exist or is not an Ethernet Interface IP OFFLINE SET: No IP Unnumbered First IP OFFLINE SET: NO IP Unnumbered IP OFFLINE SET: Add Interface Address Failed IP OFFLINE SET: Set DB Failed IP OFFLINE SET: Delete the IP Address Failed IP OFFLINE SET: Invalid Host Address IP OFFLINE SET: Invalid Next Hop IP OFFLINE SET: Inconsistent Address and Mask IP OFFLINE SET: Add IP Route Failed IP OFFLINE SET: No Matching Route to Delete IP OFFLINE SET: Delete Route Failed IP OFFLINE SET: Next Hop Conflict IP OFFLINE SET: Next Hop not IP OFFLINE SET: IP Address not Exists IP OFFLINE SET: Not Ethernet Interface IP OFFLINE SET: MAC beyond Valid Space IP OFFLINE SET: DB MAC OperationType Invalid IP OFFLINE SET: a Same Prefix IP Address Exist IP OFFLINE SET: Invalid IP Broadcast Address IP OFFLINE SET: The Number of IP Address on this Port cannot Exceed 4 IP OFFLINE SET: The Input Parameter is Null
22 22 23 23 50 50 70 23 24 24 50 51 51 24 51 25 51 52 52 25 52 53 25 53 53 25
83
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Notifi cation Code 20568 20569 20570 20800 20801 20802 20803 21059 21060 21063 21064 21065 21066 21312 21315 21316 21319 21320 21324 21325 21326 21327 21329 21568 21570 21572 21573 21575 21576 21579
Notification Name
P.No.
IP OFFLINE Cfg: The IP Address Already Exists IP Offline Cfg: The IP Address Already Exists Invalid Mask or ARP Allocate Memory Instance Fail ARP Allocate Memory Fail for ARP Cache IP Address Collided with the Others Found Duplicate MAC Address in the ARP Packet RIP Configure Neighbor Fail RIP Interface Authentication Fail RIP Interface is Disabling RIP Interface is Enabling Ignored Packet for Differ Interface RIP Failed to Create RIP The Router Id in the HELLO Package which OSPF Received is same as the Router id of OSPF Virtual Link State Changed OSPF Interface State Changed OSPF Virtual Interface Configure in Error OSPF Interface Configure in Error OSPF Virtual Interface Authentication Fail OSPF Interface authentication Fail OSPF Virtual Neighbor State Change OSPF Neighbor State Change LSDB Overflow Create BGP Instance Fail BGP Create Neighbor Fail BGP Cant Get TCB for Passive Listen BGP Cant Get TCB for Active Connect BGP Enable Passive Listen TCB Fail BGP Enable Active Connect TCB Fail BGP Add Neighbor to Group Fail
26 26 26 27 27 27 27 28 28 28 29 63 65 29 53 54 29 30 30 30 54 54 55 31 31 31 32 32 32 32
84
Notifi cation Code 21580 21581 21582 21584 21586 21607 21825 21831 21837 22336 22592 22593 22594 22595 22848 23104 23105 23106 23107 25664 25665 25666 26176 26177 26178 26179 26692 28224 28225 28226
Notification Name
P.No.
BGP Interface is Down, and Neighbor Disconnects BGP Interface Address Changed, and Neighbor Disconnects BGP Neighbor Read Receive Buffer Fail BGP Neighbor Hold Timer Expired BGP Neighbors FSM Error BGP State Change Courier Create BGP Instance Fail Courier Enable OSPF by the RTR_ID Fail Courier Synch IP Route Table Error MAC Addreses Conflict While Computing or Deleting It Timer for ISIS Creates ISIS Hello Packet Authentication ISIS LSP Packet Authentication ISIS SNP Packet Authentication Configure BFD Session Fails Alarm Pool is Over in OAM Alarm Manager Process OAM Agent Receive Refuse Alarm Inform Board Self-Checking Defeat Board Initialization Defeat Half-Fixed Connection is Changed Abnormally Half Fixedly Connection Configuration Data is Error Ec of Index Configed as Signal Link be Informed Enable CLK Base Change CLKG Frequence Base Quality Changed CLKG Work Mode Changed Base Invalid Reason Changed LAN91 Error OSPFV3 Routerid OSPFV3 Virtual Interface State OSPFV3 Interface State
33 33 33 34 55 56 34 34 35 35 62 62 62 63 63 35 36 36 36 56 37 64 59 59 59 37 70 66 66 66
85
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
Notifi cation Code 28227 28228 28229 28230 28231 28232 28736 29505 29507 167777 92 167777 93 167777 94 167777 95 167777 96 167780 48 167780 49 167780 52 167795 84 167795 85 167795 86 167795 87 503317 12 587202 57 587202 58
Notification Name
P.No.
OSPFV3 Virtual Interface Configure OSPFV3 Interface Configure OSPFV3 Virtual Neighbor State OSPFV3 Neighbor State OSPFV3 Routerid OSPFV3 Instance Create 80G Chip RIPng Interface is RIPng Failed to Create RIP Fail to Reset MSCe Fail to Reset Circuit in MSCe Circuit is not Set Up in MSCe Block CIC Failed Unblock CIC Failed Fail to Use BCM Long Bill Base Station IUA Receives the Notify Message IUA Receives Error Message IUA AS State Transform IUA ASP State Transform OMP Restart HP Server Power Supply Power off HP Server Power Supply Power
66 67 67 67 67 68 68 69 69 38 38 60 38 38 38 39 39 39 39 71 71 60 61 61
86
Tables
Table 1 Chapter Summary ....................................................i Table 2 Typographical Conventions ....................................... ii Table 3 Mouse Operation Conventions ................................... ii
87
ZXC10 MGW cdma2000 Media Gateway Alarm and Notification Information (2)
88
Index
Address IP Address24, 25, 26, 27, 52, 53, 83, 84 MAC Address ............ 27, 84 Association................... 45, 81 Backboard............... 42, 79, 80 Changeover........................ 57 Frame ......................... 20, 82 HW ............................. 21, 37 Message .... 6, 7, 39, 40, 45, 80 MGC....................................9 Querying Notification Notification Code............. 79 Reset ...........................14, 38 Server OMC............................ 1, 2 SIGTRAN AS ................ 45, 71, 81, 86 ASP............... 44, 71, 81, 86 SCTP ............................. 11 SSN .................................. 11
89