Академический Документы
Профессиональный Документы
Культура Документы
High Performance Greases and Lubricants Product Data Sheet BALMEROL MULTIGREASE NO 3
PRODUCT DESCRIPTION
BALMEROL MULTIGREASE NO 3 are made from high quality mineral oil thickened with lithium soap and fortified with functional additives to impart oxidation and corrosion resistance. BALMEROL MULTIGREASE NO 3 conform to IS : 7623 (1993) and IPSS-1-09-006 (97) specifications. TYPICAL APPLICATIONS BALMEROL MULTIGREASE NO 3 are recommended for multipurpose applications including high performance wheel bearings, chassis points, water pump bearings. They are pumpable and can be dispensed by any greasing system. BALMEROL MULTIGREASE NO 3 is recommended for all normal grease application areas. TECHNICAL SPECIFICATION CHARACTERISTICS Type of thickener Texture NLGI GRADE Base oil viscosity at 40 C,cSt Drop point , C, min. Emcor rust test rating, max. Timken OK load , Kg, min. Resistance to water- wash out at 80C, % by mass, max. Operating temperature range, C, SPECIFICATIONS
Lithium soap
-Aug 2003
BALMEROL
High Performance Greases and Lubricants Product Data Sheet
PRODUCT DESCRIPTION
BALMEROL LICOM 2 Grease is multifunctional high temperature grease formulated with a high dropping point lithium complex soap system and specially developed synergistic additives for lubrication upto 160oC under normal to heavy loads. The complex soap incorporated in the grease enables it to retain its structure even at high temperatures and high loads, thereby reducing leakage and enhancing component life with extension of relubrication intervals. BALMEROL LICOM 2 has excellent shear stability and good surface adhesion. It is non-ageing and is highly resistant to cold and hot water, heat, dust, rust, corrosion and oxidation.
TYPICAL APPLICATIONS
BALMEROL LICOM 2 is suitable for lubrication of all types of industrial bearings operating under higher than ambient temperature conditions under heavy loads. It is particularly beneficial in high temperature applications where use of conventional greases calls for frequent relubrication. Typical applications include kiln car rollers, hot air fan bearings, electric motor bearings and clutch release bearings in the metallurgical, ceramic, cement and electrical industry. Due to superior load bearing capacity, low coefficient of friction, excellent antiwear properties and better structural stability, BALMEROL LICOM 2 shows considerably better performance as compared to conventional and non-soap greases for high temperature applications. REMARKS BALMEROL LICOM 2 is not compatible with sodium based greases or other conventional greases. Hence, bearings should be thoroughly cleaned before filling BALMEROL LICOM 2 Grease. Only twothird of the bearing needs to be filled for optimum lubrication. AVAILABILITY BALMEROL LICOM 2 is available in 182 kg drums & 18 kg packs.
BALMEROL
High Performance Greases and Lubricants Product Data Sheet
Technical Data
Sl.N 1. 2. 3. 4. 5. 6. 7. 8. 9. Base Drop point, oC Worked penetration, 60/60 strokes Penetration, difference after 100,000 strokes Four Ball Weld Load, kg. Water Washout loss, % @ 80 oC Oxidation Stability, pressure drop kgf/cm2 after 100 hrs at 99oC max. Emcor Rust Test rating Maximum application temperature, oC Characteristics LICOM-2 Lithium complex soap >240 265- 295 <35 250 <5 0.40 00 160 Test Method ASTM D 566 ASTM D 217 ASTM D 217 IP 239 ASTM D 1264 ASTM D 942 IP-220 -