Академический Документы
Профессиональный Документы
Культура Документы
Mesh Menu Mesh Commands Mesh/Make Mesh/Delete Mesh/Mesh Info Mesh/Show Mesh Mesh/Display Parameters
Create or delete a mesh. Display information such as the number of tetrahedra and volumes in your object. Change the display attributes for the mesh.
When you choose Mesh from the menu bar, the following menu appears:
Mesh Commands
The following commands are available from the mesh menu: Make Delete Mesh Info Show Mesh Display Parameters Creates a finite element mesh on a seeded object. Deletes the entire mesh. Displays information about the mesh. Turns the mesh display on or off. Displays various aspects of the mesh.
384
Topics:
Mesh Menu Mesh Commands Mesh/Make Settings for Initial Surface Triangulation Mesh/Delete Mesh/Mesh Info Mesh/Show Mesh Mesh/Display Parameters
The default faceter settings work very well for Ansoft HFSSs adaptive solution algorithm, which is used for a wide variety of problems. The settings should be modified only under unusual circumstances.
385
Topics:
Mesh Menu Mesh Commands Mesh/Make Settings for Initial Surface Triangulation Mesh/Delete Mesh/Mesh Info Mesh/Show Mesh Mesh/Display Parameters
More
When an objects surface is non-planar, as shown above, the faceted triangle faces will lie a small distance from the objects true surfaces. This distance is called the surface deviation. The surface deviation is greater near the triangle centers and less near the triangle vertices. The Settings for Initial Surface Triangulation window enables you to alter the shape of each triangle and the surface deviation of the faceted triangle faces from the true surfaces. > To reset the faceter settings: 1. Enter the maximum angular deviation for each type of Cone/Cylinder, Sphere, Torus, and Spline surface in the model in the respective Max angular dev fields. This value is the maximum permitted angular deviation between the normals of the faceted triangles and the normals of the true surfaces they represent.
386
Topics:
Mesh Menu Mesh Commands Mesh/Make Settings for Initial Surface Triangulation Mesh/Delete Mesh/Mesh Info Mesh/Show Mesh Mesh/Display Parameters
Topics:
Mesh Menu Mesh Commands Mesh/Make Mesh/Delete Mesh/Mesh Info Mesh/Show Mesh Mesh/Display Parameters
Mesh/Mesh Info
Use this command to display the numbers of total tetrahedra, the maximum and minimum volumes, the number of the solids, and the names of the objects in the model. > To display information about the existing mesh: 1. Choose Mesh/Mesh Info. The Mesh Information window appears. 2. Choose OK to return to the Meshmaker or Help for more information on the mesh.
Mesh/Show Mesh
Use this command to toggle the mesh display on and off. A check box appears next to this command if the mesh is shown. > To show the mesh on an object or face: Choose Mesh/Show Mesh. Choose it again to turn off the mesh. The check box will vanish.
Topics:
Mesh Menu Mesh Commands Mesh/Make Mesh/Delete Mesh/Mesh Info Mesh/Show Mesh Mesh/Display Parameters
More
389
Topics:
Mesh Menu Mesh Commands Mesh/Make Mesh/Delete Mesh/Mesh Info Mesh/Show Mesh Mesh/Display Parameters