Академический Документы
Профессиональный Документы
Культура Документы
Features:
4N2X series: 4N25, 4N26, 4N27, 4N28 4N3X series: 4N35, 4N36, 4N37, 4N38 H11AX series: H11A1, H11A2, H11A3, H11A4, H11A5 High isolation voltage between input and output (Viso=5000 V rms) Creepage distance >7.6mm Operating temperature up to +110C Compact dual-in-line package Pb free and RoHS compliant. UL approved (No. E214129) VDE approved (No. 132249) SEMKO approval pending NEMKO approval pending DEMKO approval pending FIMKO approval pending CSA approval pending
Schematic
Description
The 4N2X, 4N3X, H11AX series contains an infrared emitting diode optically coupled to a phototransistor. It is packaged in a 6-pin DIP package and available in wide-lead spacing and SMD option.
Applications
Power supply regulators Digital logic inputs Microprocessor inputs
Rating 50 1 6 70 3.8
VCEO VCBO
80 80 7 7 150 9.0
Notes *1 AC for 1 minute, R.H.= 40 ~ 60% R.H. In this test, pins 1, 2 & 3 are shorted together, and pins 4, 5 & 6 are shorted together. *2 For 10 seconds.
Output
Parameter Collector-Base dark current Collector-Emitter dark current Collector-Emitter breakdown voltage Collector-Base breakdown voltage Emitter-Collector breakdown voltage Emitter-Base breakdown voltage Collector-Emitter capacitance * Typical values at Ta = 25C Symbol ICBO ICEO BVCEO BVCBO BVECO BVEBO CCE Min. 80 80 7 7 Typ.* 8 Max. 20 50 50 Unit nA nA V V V V pF Condition VCB = 10V VCE = 10V, IF=0mA VCE = 60V, IF=0mA Ic=1mA IC=0.1mA IE=0.1mA IE=0.1mA VCE=0V, f=1MHz
10 -
RIO CIO 10 11
0.2
1.0 pF
Isolation resistance Input-output capacitance 4N25, 4N26, 4N27, 4N28, H11A1, H11A2, H11A3, Turn-on time H11A4, H11A5 4N35, 4N36, 4N37, 4N38 4N25, 4N26, 4N27, 4N28, H11A1, H11A2, H11A3, H11A4 4N35, 4N36, 4N37, 4N38 * Typical values at Ta = 25C
Everlight Electronics Co., Ltd. Document NoDPC-717-044 Rev. 0
Ton
10 s
10
12
VCC = 10V, IC = 2mA, RL = 100, See Fig. 11 VCC = 10V, IF = 10mA, RL = 100 See Fig. 11 s
Toff -
10
Turn-off time
12
IC
RL
Input RIN
RBE
tf toff
4NXXY(Z)-V
or
H11AXY(Z)-V
Note XX X Y Z V = Part no. for 4NXX series (25, 26, 27, 28, 35, 36, 37 or 38) = Part no. for H11AX series (1, 2, 3, 4, or 5) = Lead form option (S, S1, M or none) = Tape and reel option (TA, TB or none). = VDE (optional)
Description
Packing quantity 65 units per tube 65 units per tube 1000 units per reel 1000 units per reel 1000 units per reel 1000 units per reel
Wide lead bend (0.4 inch spacing) Surface mount lead form + TA tape & reel option Surface mount lead form + TB tape & reel option Surface mount lead form (low profile) + TA tape & reel option Surface mount lead form (low profile) + TB tape & reel option
Option M Type
Option S1 Type
EL 4N35 YW W V
Notes EL 4N35 Y WW V denotes Everlight denotes Device Number denotes 1 digit Year code denotes 2 digit Week code denotes VDE (optional)
10
Option TB
Tape dimensions
A 10.40.1
B 7.520.1
Do 1.50.1
D1 1.5+0.1/-0
E 1.750.1
F 7.50.1
Po 4.00.15
P1 16.00.1
P2 2.00.1
t 0.350.03
W 16.00.2
K 4.50.1
11
12
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for use as outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT Corporation. Please do not reproduce or cause anyone to reproduce them without EVERLIGHTs consent.
13