Академический Документы
Профессиональный Документы
Культура Документы
1 & 2 Pole relay range 46.52 - 2 Pole 8 A 46.61 - 1 Pole 16 A Socket mount or direct connection via Faston connectors AC coils & DC coils Available with: lockable test button, mechanical indicator & LED indicator 8 mm, 6 kV (1.2/50 s) isolation, coil-contacts Cadmium Free contacts
46.52
46.61
29
12.4
20
32.8
46.52
6.5 2.5 29 0.5 2.5 12.4
8 A1
2 3 12 11
5 A1
2 4 3 12 11 14
A2 1
22 21 24 7 6 5
A2 1
8.9
7.4
32.8
20
2.2
14.4
5 5
7.5
4.8
12.3 5.2
5.2
46.61
6.5
4.75
0.5
4.75
FOR UL HORSEPOWER AND PILOT DUTY RATINGS SEE General technical information page V
Contact specification Contact configuration Rated current/Maximum peak current Rated load AC1 Rated load AC15 (230 V AC) Single phase motor rating (230 V AC) Breaking capacity DC1: 30/110/220 V Minimum switching load Standard contact material Coil specification Nominal voltage (UN) Rated power Operating range Holding voltage Must drop-out voltage Technical data Mechanical life AC/DC Electrical life at rated load AC1 Operate/release time cycles cycles ms 10 106 100 10 10/3 6 (8 mm) 1,000 40 ... +70 RT II
3
2 CO (DPDT) A VA VA kW A 8/15 250/440 2,000 350 0.37 6/0.5/0.15 300 (5/5) AgNi V AC (50/60 Hz) V DC VA/W AC DC AC/DC AC/DC
1 CO (SPDT) 16/25 250/440 4,000 750 0.55 12/0.5/0.15 300 (5/5) AgNi
mW (V/mA)
12 - 24 - 48 - 110 - 120 - 230 - 240 12 - 24 - 48 - 110 - 125 1.2/0.5 (0.8...1.1)UN (0.73...1.1)UN 0.8UN /0.4UN 0.2UN /0.1UN 1.2/0.5 (0.8...1.1)UN (0.73...1.1)UN 0.8UN /0.4UN 0.2UN /0.1UN 10 106 100 103 15/5 6 (8 mm) 1,000 40 ... +70 RT II
Insulation between coil and contacts (1.2/50 s) kV Dielectric strength between open contacts V AC Ambient temperature range Environmental protection Approvals (according to type) C
4 6. 6
Series Type 5 = Spade/blade solder terminal (2.5x0.5)mm 6 = Spade/blade terminal Faston 187 (4.8x0.5)mm No. of poles 1 = 1 pole, 16 A 2 = 2 poles, 8 A Coil version 9 = DC 8 = AC (50/60 Hz) Coil voltage See coil specifications
1 . 9 . 0 2 4 . 0
0
D: Special versions 0 = Standard C: Options 2 =Mechanical indicator 4 =Lockable test button + mechanical indicator 54 =Lockable test button + LED (AC) + mechanical indicator 74 =Lockable test button + double LED (DC non-polarized) + mechanical indicator
A: Contact material 0 = AgNi 4 = AgSnO2 (46.61 only) 5 = AgNi + Au (5 m) B: Contact circuit 0 = CO (nPDT)
Selecting features and options: only combinations in the same row are possible. Preferred selections for best avaliability are shown in bold. Type 46.52 Coil version AC - DC AC DC AC - DC AC DC A 0-5 0-5 0-5 0-4-5 0-4-5 0-4-5 B 0 0 0 0 0 0 C 2-4 54 74 2-4 54 74 D 0 / / 0 / /
46.61
Descriptions: Options
1 A2
Lockable test button and mechanical flag indicator (0040, 0054, 0074)
The dual-purpose Finder test button can be used in two ways: Case 1) The plastic pip (located directly below the test button) remains intact. In this case, when the test button is pushed, the contacts operate. When the test button is released the contacts return to their former state. Case 2) The plastic pip is broken-off (using an appropriate cutting tool). In this case, (in addition to the above function), when the test button is pushed and rotated, the contacts are latched in the operating state, and remain so until the test button is rotated back to its former position. In both cases ensure that the test button actuation is swift and decisive.
Contact specification
F 46 - Electrical life (AC) v contact current Type 46.52
10
7
Cycles
Cycles
10
10
10
10 0 2 4 6 8 (A)
12
16 (A)
When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of 100103 can be expected. In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load. Note: the release time for the load will be increased.
DC voltage (V) 3
1
1.0 1.0
2
0.5 -20 0 20 40 60 80 (C) 0.5 -20 0 20 40
2
60 80 (C)
1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature.
1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature.
Accessories
Flange mount adaptor for relays types 46.52 and 46.61
36.6 3.6 2 14.4 2 36.6
046.05
046.05
38 46 46 38 18.1
14.4
3.6
18.1 35.1
046.05
046.07
046.07
46.9 34.8 46.9 35.4 35.4
38.3
Sheet of marker tags for relays types 46.52 and 46.61 (72 tags), 6x12mm
060.72
060.72 4
97.01
095.18 (blue)
097.01
16 A - 250 V AC 8 A - 250 V AC 6 kV (1.2/50 s) between coil and contacts IP 20 40+70 (see diagram L97) 0.8 8 solid wire stranded wire 1x6 / 2x2.5 1x4 / 2x2.5 1x10 / 2x14 1x12 / 2x14
68.4 64.9
L 97 - Rated current vs ambient temperature (for 46.61 relay / 97.01 socket combination)
15.8 15.8
6 21 5 24 7 22 3 11 4 14 2 12
26.5
19.2
19.2
-20
20
40
60
80 (C)
97.01 97.01
97.02 97.02
35.3
8-way jumper link for 97.01 and 97.02 sockets Rated values
095.18
3.3 110.5 5.1
21.6
20 18 16 14 12 10 8 6 4 2 0
4 11 3 14 2 12
COM NO NC
COM NO NC
82.85
82.85
1 A2
5 A1
32
COIL
1 A2
8 A1
COIL
32
35.4
3.2
3.2
25.85
095.18.0 (black)
15
15.8
15.8
15.8
15.8
15.8
15
86 series timer module (1224)V AC/DC; Bi-function: AI, DI; (0.05s100h) (230...240)V AC; Bi-function: AI, DI; (0.05s100h) Approvals (according to type): 99.02 coil indication and EMC suppression modules for 97.01 and 97.02 Diode (+A1, standard polarity) (6...220)V DC LED (6...24)V DC/AC LED (28...60)V DC/AC LED (110...240)V DC/AC LED + Diode (+A1, standard polarity) (6...24)V DC LED + Diode (+A1, standard polarity) (28...60)V DC LED + Diode (+A1, standard polarity) (110...220)V DC LED + Varistor (6...24)V DC/AC LED + Varistor (28...60)V DC/AC LED + Varistor (110...240)V DC/AC RC circuit (6...24)V DC/AC RC circuit (28...60)V DC/AC RC circuit (110...240)V DC/AC Residual current by-pass (110...240)V AC sockets 99.02.3.000.00 99.02.0.024.59 99.02.0.060.59 99.02.0.230.59 99.02.9.024.99 99.02.9.060.99 99.02.9.220.99 99.02.0.024.98 99.02.0.060.98 99.02.0.230.98 99.02.0.024.09 99.02.0.060.09 99.02.0.230.09 99.02.8.230.07
5
10.3
86.30.0.024.0000 86.30.8.240.0000
86.30
99.02
97.52.0 (black)
97.51 97.51
10 A - 250 V AC 8 A - 250 V AC 6 kV (1.2/50 s) between coil and contacts IP 20 25+70 8 solid wire stranded wire 2x(0.2...1.5) 2x(0.2...1.5) 2x(24...18) 2x(24...18)
62.73 24.6
6 21 3 11 4 14 2 12
097.01
4 4
COM
21
3
4 4
COM
COM 11
4
COM
11
30.6
NO
NO 14
2
5 24 7 22
NO
24
4
NO
14
NC
NC 12
3
NC
22
2
NC
12
95.6
34.7
3.2
95.6
3.2
1 A2
5 A1
COIL
1 A2
8 A1
COIL
38.3
30.3
37.2
A2
1
97.51
A2
5
97.52
COIL
8
COIL
A1
A1
15.8
22.6 32.5
15.8
30.3
34.7
30.6
22.6 32.5
97.51
97.52
86 series timer module (1224)V AC/DC; Bi-function: AI, DI; (0.05s100h) (230...240)V AC; Bi-function: AI, DI; (0.05s100h)
86.30
86.30.0.024.0000 86.30.8.240.0000
Approvals (according to type): 99.02 coil indication and EMC suppression modules for 97.51 and 97.52 Diode (+A1, standard polarity) (6...220)V DC LED (6...24)V DC/AC LED (28...60)V DC/AC LED (110...240)V DC/AC LED + Diode (+A1, standard polarity) (6...24)V DC LED + Diode (+A1, standard polarity) (28...60)V DC LED + Diode (+A1, standard polarity) (110...220)V DC LED + Varistor (6...24)V DC/AC LED + Varistor (28...60)V DC/AC LED + Varistor (110...240)V DC/AC RC circuit (6...24)V DC/AC RC circuit (28...60)V DC/AC RC circuit (110...240)V DC/AC Residual current by-pass (110...240)V AC sockets 99.02.3.000.00 99.02.0.024.59 99.02.0.060.59 99.02.0.230.59 99.02.9.024.99 99.02.9.060.99 99.02.9.220.99 99.02.0.024.98 99.02.0.060.98 99.02.0.230.98 99.02.0.024.09 99.02.0.060.09 99.02.0.230.09 99.02.8.230.07
99.02
Packaging codes
How to code and identify retaining clip and packaging options for sockets. Example:
9 7 . 0
S P
A
A Standard packaging SP Plastic retaining clip
9 7 . 0
6