Академический Документы
Профессиональный Документы
Культура Документы
Course Objective
At the end of the course, students would understand:
The different types of projection techniques How to sketch multi view drawings of any given pictorial drawings How to sketch pictorial drawings of given multi view drawings Sketching auxiliary and sectional views as a supplement of multi view drawings. How to find intersection lines of different geometries and development of surfaces.
Course Outline
1. Introduction History Objective of the course Lettering Drawing Instrument Types of line
2. Theory of projection
Types of projections Classification of projections Projection of point Projection of a line (Normal, inclined, oblique)
3. Multi-view drawings
Systems of projection; Choice of views, Laying out of views; Projection of lines, Planar and non-planar lines; Tangent surfaces; Fillets; Rounds; Run-outs.
4. Pictorial drawing Comparison between multi-view and pictorial drawings; Axonometric; Oblique and central projections; Isometric and oblique drawings
5. Auxiliary Views Primary and secondary auxiliary views; Complete and partial auxiliary views
6. Sectional views Making sectional drawings; Types of sections; Conventional representations; Sectional auxiliary views; Sections in pictorial drawings
7.2 Intersection
Lines of intersections between two prisms Lines o f intersections between two prisms Lines of intersections between two cylinders Lines of intersections between a cone and a cylinder Lines of intersections between a cone and a prism
References
1.
Cecil H. Jensen, Jay D. Helsel, Dennis Short, Jay Helsel, Cecil Jensen, Engineering Drawing And Design Student Edition 2002, July 27, 2001 (Drafting and Design) 5th edition, December 22, 2004
Leroy Hill , John T. Dygdon , James E. Novak , Ivan L. Hill, Technical Drawing (12th Edition), 2002
Assessment
Assignment and class works 40% Final examination 60%
Remark
1. Assignments are submitted at the date due; submission after the due date is not allowed 2. Students are expected to attend all class; students having an attendance less than 75% will not be allowed to sit on the final exam