Академический Документы
Профессиональный Документы
Культура Документы
Electric field strength / intensity at a point is defined as the force per unit positive charge acting at that point {a vector; Unit: N C-1 or V m-1}
E = F / q F = qE
The electric force on a positive charge in an electric field is in the direction of E, while The electric force on a negative charge is opposite to the direction of E. Hence a +ve charge placed in an electric field will accelerate in the direction of E and gain KE {& simultaneously lose EPE}, while a negative charge caused to move (projected) in the direction of E willdecelerate, ie lose KE, { & gain EPE}.
Coulomb's law:
The (mutual) electric force F acting between 2 point charges Q1 and Q2 separated by a distance r is given by:
F = Q1Q2 / 4or2 = (8.99 x 109) [(4.18 x 10-6)(6.36 x 10-6) / (13.0 x 10-2)2] = 14.1 N (Note: negative sign for -6.36 C has been ignored in the calculation) FR = 2 x Fcos300 = 24.4 N, vertically upwards
Electric field strength due to a Point Charge Q : E = Q / 4or {NB: Do NOT substitute a negative Q with its negative sign in calculations!} Example 2: In the figure below, determine the point (other than at infinity) at which the total electric field strength is zero.
From the diagram, it can be observed that the point where E is zero lies on a straight line where the charges lie, to the left of the -2.5 C charge. Let this point be a distance r from the left charge. Since the total electric field strength is zero, E6 = E-2 [6 / (1 + r)2] / 4or2 = [2.5 / r2] / 4or2 (Note: negative sign for -2.5 C has been ignored here) 6 / (1 + r)2 = 2.5 / r2 (6r) = 2.5 (1 + r) r = 1.82 m The point lies on a straight line where the charges lie, 1.82 m to the left of the -2.5 C charge.
Path of charge moving at 90 to electric field: parabolic. Beyond the pt where it exits the field, the path is a straight line, at a tangent to the parabola at exit.
Example 3: An electron (m = 9.11 x 10-31 kg; q = -1.6 x 10-19 C) moving with a speed of 1.5 x 107 ms-1, enters a region between 2 parallel plates, which are 20 mm apart and 60 mm long. The top plate is at a potential of 80 V relative to the lower plate. Determine the angle through which the electron has been deflected as a result of passing through the plates.
Time taken for the electron to travel 60 mm horizontally = Distance / Speed = 60 x 10-3 / 1.5 x 107 = 4 x 10-9 s E = V / d = 80 / 20 x 10-3 = 4000 V m-1 a = F / m = eE / m = (1.6 x 10-19)(4000) / (9.1 x 10-31) = 7.0 x 1014 ms-2 vy = uy + at = 0 + (7.0 x 1014)( 4 x 10-9) = 2.8 x 106 ms-1 tan = vy / vx = 2.8 x 106 / 1.5 x 107 = 0.187 Therefore = 10.6
Equipotential surface: a surface where the electric potential is constant Potential gradient = 0, ie E along surface = 0 }
Hence no work is done when a charge is moved along this surface.{ W=QV, V=0 } Electric field lines must meet this surface at right angles. {If the field lines are not at 90 to it, it would imply that there is a non-zero component of E along the surface. This would contradict the fact that E along an equipotential = 0. }
Electric potential at a point: is defined as the work done in moving a unit positive charge from infinity to that point, { a scalar; unit: V } ie V
=W/Q
The electric potential at infinity is defined as zero. At any other point, it may be positive or negative depending on the sign of Q that sets up the field. {Contrast gravitational potential.} Relation between E and V: E
= - dV / dr
i.e. The electric field strength at a pt is numerically equal to the potential gradient at that pt. NB: Electric field lines point in direction of decreasing potential {ie from high to low pot}. Electric potential energy U of a charge Q at a pt where the potential is V: U = QV Work done W on a charge Q in moving it across a pd V: W = Q V Electric Potential due to a point charge Q : V = Q / 4or {NB: Substitute Q with its sign}