Академический Документы
Профессиональный Документы
Культура Документы
SB-307B
FEATURES
Low operating cost No electrical maintenance on magnet No costly shutdowns Uninterrupted magnetic protection Simple installation Powerful magnetic field
TYPICAL OPERATION
The magnet is placed across the conveyor belt. A moving continuous belt surrounds the magnet box. Ferrous material is attracted by the magnet and is held on the belt. As the belt moves clear of the magnetic field, ferrous metals fall away into bins for collection and disposal. The CP 20/80 SC2 is designed for a maximum suspension height of approximately 10 inches (250 mm) on belts less than 36 inches (1 m) wide. Applications involving wider belts or higher suspension may require a larger suspended permanent magnet or an SE7000 electromagnet.
MAGNET SELECTION
The size of the appropriate suspended permanent magnetic separator depends upon each specific application. Eriez engineers need the listed information in order to select the most efficient and economic magnet for any particular application. INFORMATION REQUIRED Material type Material bulk density Material condition Material size Type and minimum size of tramp iron Maximum lump size Conveyor belt/chute width
Conveyor belt speed Conveyor belt/chute dimensions and incline Angle of troughing idlers Machinery to be protected Head pulley diameter Head pulley material
DIMENSIONS
16.2 412 12.6 320 20.5 520 78.4 1990
1.6 DIA. 40
31.5 800 TYPE SC2 9.2 234
18 457
SUSPENSION
Eriez and Eriez Magnetics are registered trademarks of Eriez Manufacturing Co.
World Authority in Advanced Technology for Magnetic, Vibratory and Metal Detection Applications
HEADQUARTERS: 2200 ASBURY ROAD, P.O. BOX 10608, ERIE, PA 16514-0608 U.S.A. Telephone 814/835-6000 800/345-4946 Fax 814/838-4960 International Fax 814/833-3348 Web Site: http://www.eriez.com e-mail: eriez@eriez.com MANUFACTURING FACILITIES IN: AUSTRALIA BRAZIL CANADA JAPAN MEXICO SOUTH AFRICA UNITED KINGDOM UNITED STATES
799-2.5M-SG-SEN ERIEZ MANUFACTURING CO. PRINTED IN USA