Вы находитесь на странице: 1из 2

Myriad Magnetic Digital Media Printing Instructions

1. Configure the Ilumina multi-purpose input tray for the magnetic media. Go to the front panel and press the down arrow and select the Menu option. Locate the Tray Configuration MPTray Config and set as follows: Paper Size = Set to media size Media Type = Magnetic (NOTE: If this media type is not available, see Ilumina Code Update on Page 2.) Media Weight = Ultra Heavy3 2. Locate the MEDIA SELECT switch next to the multi-purpose input tray and move to >300gsm mode. 3. Open the face-up exit tray. 4. Place the magnetic media face-up, one sheet at a time in the multi-purpose input tray. 5. From the application print selections select the Page Size, Media Type, and Output Bin.

To Achieve Maximum Durability


Post processing using a heated roll laminator For optimum durability the printed magnetic media can be processed through a heated roll laminator. This procedure improves the durability of the printed image and does not require lamination film. 1. If the laminator is a variable speed unit set the speed to medium. 2. Set the laminator temperature to a medium high setting. The surface exit temperature should not exceed 200F (94C). 3. Place the imaged magnetic media on a sheet of paper and feed through the laminator. Post processing using an oven 1. Put a metal cookie sheet on the top rack. This sheet will reduce the direct heating of the oven coils. 2. Pre-heat the oven to 300F (150C). 3. Turn the oven off to prevent the elements from super heating the media. 4. Place the magnetic media on a second metal carrier sheet and place in the oven on the rack under the metal sheet added in step 1. 5. Remove the sheet after 30 45 seconds. 6. Take care to not touch the surface of the magnetic media until it has cooled.
Corporate Headquarters: 2800 Dauphin Street Mobile, AL 36606 USA USA 800-926-8839 EU +31 (0) 26.319.3210 Global +1.251.473.6502 xante.com 9/11/2008 : 3:53 PM : v4 -1-

Ilumina Code Update for Magnetic Media


1. Determine the printer version before updating. Go to the printers front panel and press the Menu key Select: Configuration -> System -> PU Version -> Enter (The PU Version will be displayed) PU Version: 00.03.XX - uses file: Ilumina_9600_HDD.pjl PU Version: 00.05.XX uses file: Ilumina_9650_HDD.pjl - OR Print a configuration page and locate the PU Version at the top of the page Download the correct code version and printer driver version from the web at www.xante.com/support/ilumina and click on the link update my code? under the How Do I title block. Extract the files taking note of where the files are located on your computer. Send the file identified from step 1 to the Ilumina. When correctly downloaded the printer will reset. To download the code to the Ilumina: Open a CMD window: Start->Run At the text block type: cmd.exe and click OK the CMD window will appear

2. 3. 4.

At the command prompt type: Windows XP: cd c:\xante_dr\Ilm_inf_2000XP <ENTER> Windows 98/ME: cd c:\xante_dr\Ilm_inf_9x <ENTER> Windows NT: cd c:\xante_dr\Ilm_inf_NT <ENTER> At the command prompt type: lpr S IPAddress P p Ilumina_96?0_HDD.pjl <ENTER>

5.

6.

Install the correct printer driver for your OS version. Download one of the following from the Xante support site: Windows 2K, XP, Vista -> Ilumina w2k_XP_Vista with build date 08-15-2008 or later Windows 98,ME -> Ilumina w9x with build date 08-15-2008 or later Windows NT -> Ilumina NT4 with build date 08-15-2008 or later From the Start->Settings->Printers and Faxes double click on the Add Printer item to begin the install process.

Corporate Headquarters: 2800 Dauphin Street Mobile, AL 36606 USA USA 800-926-8839 EU +31 (0) 26.319.3210 Global +1.251.473.6502 xante.com 9/11/2008 : 3:53 PM : v4 -2-

Вам также может понравиться