Академический Документы
Профессиональный Документы
Культура Документы
Description
This improved full adder performs the addition of two 4-bit binary numbers. The sum ( ) output are provided for each bit and the resultant carry (C4) is obtained from the fourth bit. This adder features full internal look ahead across all four bit generating the carry term in ten nanoseconds typically. This provides the system designer with partial look-ahead performance at the economy and reduced package count of a ripple-carry implementation.
Features
High Speed Operation: tpd (Ai or Bi to Zi ) = 16 ns typ (CL = 50 pF) High Output Current: Fanout of 10 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Current: 1 A max Low Quiescent Supply Current: ICC (static) = 4 A max (Ta = 25C)
HD74HC83
Function Table
Outputs Inputs A1/A3 L H L H L H L H L H L H L H L H H : L : X : Note: B1/B3 L L H H L L H H L L H H L L H H A2/A4 L L L L H H H H L L L L H H H H B2/B4 L L L L L L L L H H H H H H H H When C0 = L/When C2 = L 1/3 L H H L L H H L L H H L L H H L 2/4 L L L H H H H L H H H L L L L H C2/C4 L L L L L L L H L L L H H H H H When C0 = H/When C2 = H 1/3 H L L H H L L H H L L H H L L H 2/4 L H H H H L L L H L L L L H H H C2/C4 L L L L L H H H L H H H H H H H
High level Low level Irrelevant Input conditions at A 1, B1, A2, B2 and C 0 are used to determine outputs 1 and 2 and the value of the internal carry C2. The value at C 2, A3, B3, A4 and B4 are than used to determine outputs 3, 4 and C 4
HD74HC83
Pin Arrangement
16 B4 15 4 14 C4 13 C0 12 GND 11 B1 10 A1 9 1
HD74HC83
Block Diagram (1//2)
C4
B4 A4 4
B3 A3 3 B2 A2 2 B1 A1
C0
HD74HC83
DC Characteristics
Ta = 25C Item Input voltage Symbol VIH Ta = 40 to +85C Max 0.5 1.35 1.8 0.1 0.1 0.1 0.33 0.33 1.0 40 A A I OL = 4 mA I OL = 5.2 mA Vin = VCC or GND Vin = VCC or GND, Iout = 0 A V I OH = 4 mA I OH = 5.2 mA Vin = VIH or VIL I OL = 20 A V Vin = VIH or VIL I OH = 20 A V Unit V Test Conditions
VCC (V) Min Typ Max Min 2.0 4.5 6.0 1.5 3.15 4.2 0.5 1.5 3.15 4.2
VIL
Output voltage
VOH
VOL
Iin I CC
6.0 6.0
HD74HC83
AC Characteristics (CL = 50 pF, Input tr = tf = 6 ns)
Ta = 25C Item Symbol Ta = 40 to +85C Max 190 38 33 190 38 33 190 38 33 190 38 33 95 19 16 10 pF ns ns Ai or Bi to C4 ns C0 to C4 ns Ai or Bi to i Unit ns Test Conditions C0 to i
VCC (V) Min Typ Max Min 2.0 4.5 6.0 19 16 17 18 5 5 150 30 26
t PLH t PHL
150 30 26
t PLH t PHL
150 30 26
t PLH t PHL
150 30 26 75 15 13 10
t TLH t THL
Input capacitance
Cin
Unit: mm
1 1.3
1.11 Max
0.51 Min
7.62
2.54 0.25
0.48 0.10
0.25 0.05 0 15
Hitachi Code JEDEC EIAJ Weight (reference value)
+ 0.13
Unit: mm
10.06 10.5 Max 16 9
5.5
8 0.80 Max
2.20 Max
0.12 M
Hitachi Code JEDEC EIAJ Weight (reference value) FP-16DA Conforms 0.24 g
0.10 0.10
0.15
Unit: mm
1.08 0 8
0.67 0.60 + 0.20
0.15 0.25 M