Академический Документы
Профессиональный Документы
Культура Документы
Silicon N-Channel MOSFET Tetrode For low noise, high gain controlled input stages up to 1 GHz Operating voltage 5V Integrated biasing network Pb-free (RoHS compliant) package 1) Qualified according AEC Q101
RF Output + DC
GND
Maximum Ratings Parameter Drain-source voltage Continuous drain current Gate 1/ gate 2-source current Gate 1 (external biasing) Total power dissipation TS 76 C Storage temperature Channel temperature
1Pb-containing
Unit V mA V mW C
BF1005...
Thermal Resistance Parameter Channel - soldering point 1) Symbol
Rthchs
Value 370
Unit K/W
Electrical Characteristics at TA = 25C, unless otherwise specified Parameter DC Characteristics Drain-source breakdown voltage
ID = 650 A, VG1S = 0 , VG2S = 0 V(BR)DS
Symbol min. 12 8 8 8 -
Unit
Gate1-source breakdown voltage +IG1S = 10 mA, V G2S = 0 , VDS = 0 Gate2 source breakdown voltage IG2S = 10 mA, VG1S = 0 , V DS = 0 Gate1-source leakage current
VG1S = 0 , VG2S = 6 V
A nA mA
2007-04-20
BF1005...
Electrical Characteristics at TA = 25C, unless otherwise specified Parameter Symbol Values min. AC Characteristics (verified by random sampling) gfs Cg1ss Cdss Gp F G p 20 17 40 24 2.1 1.3 19 1.6 50 2.5 2.5 dB dB mS pF Forward transconductance VDS = 5 V, V G2S = 4.5 V Gate1 input capacitance VDS = 5 V, V G2S = 4 V, f = 10 MHz Output capacitance VDS = 5 V, V G2S = 4 V, f = 10 MHz Power gain (self biased) VDS = 5 V, V G2S = 4 V, f = 800 MHz Noise figure VDS = 5 V, V G2S = 4 V, f = 800 MHz Gain control range VDS = 5 V, V G2S = 4V ...0V, f = 800 GHz typ. max.
Unit
2007-04-20
BF1005...
Total power dissipation Ptot = (TS) BF1005, BF1005R Total power dissipation Ptot = (TS) BF1005W
220
mW
220
mA
180 160
180 160
P tot
P tot
TS
TS
12
mA
10 dB 0 -5
10 9
|S21|
V
ID
7 6
-25 5 4 3 2 1 0 0 0.5 1 1.5 2 2.5 3 3.5 4 5 -30 -35 -40 -45 -50 -55 0 0.5 1 1.5 2 2.5 3 3.5 4
V
VG2S
VG2S
2007-04-20
BF1005...
Forward transfer admittance |Y21| = (VG2S)
26 mS 22 20 2.4
3
pF
|Y 21|
18 16 14 12 10 8 6
Cg1ss
V
5.5
VG2S
VG2S
3
pF
2.4 2.2
Cdss
2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 0.5 1 1.5 2 2.5 3 3.5 4
V
VG2S
2007-04-20
Package SOT143
BF1005...
Package Outline
0.15 MIN.
2.4 0.15
10 MAX.
10 MAX.
0.08...0.1
0...8 0.2 M A
Foot Print
0.8 1.2 0.8
0.9
1.2 0.8
0.8
RF s
Pin 1
56
Standard Packing
Reel 180 mm = 3.000 Pieces/Reel Reel 330 mm = 10.000 Pieces/Reel
0.9
1.1
0.2
Pin 1
3.15
2.6 8
1.15
2007-04-20
Package SOT143R
BF1005...
Package Outline
B
0.15 MIN.
1 0.1
0.1 MAX.
2.4 0.15
2 0.2
+0.1 0.8 -0.05
10 MAX.
0.08...0.15
0... 8
0.2
M
Foot Print
0.8 1.2 0.8
0.8
0.8
1.2
0.9
1.1
0.9
Pin 1
Manufacturer
BFP181R Type code
Standard Packing
Reel 180 mm = 3.000 Pieces/Reel Reel 330 mm = 10.000 Pieces/Reel
4 0.2
Pin 1
3.15
2.6
1.15
2007-04-20
BF1005...
Edition 2006-02-01 Published by Infineon Technologies AG 81726 Mnchen, Germany Infineon Technologies AG 2007. All Rights Reserved.
Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (Beschaffenheitsgarantie). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com ). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
2007-04-20