Академический Документы
Профессиональный Документы
Культура Документы
D Molykote G-n Plus Molykote G-Rapid Plus Molykote M-77 GREASE PASTES Molykote Cu-7439 Plus Molykote DX Molykote E Molykote P-40 Molykote P-1900 Molykote TP-42 GREASES MINERAL OIL GREASES Molykote 1102 Molykote 1122 Molykote 165 LT Molykote BR2 Plus Molykote FB 180 Molykote G-0010 Bearing Grease Molykote G-0052FG EP White Food Grade Molykote G-67 Molykote Longterm 00 Molykote Longterm 2 plus Molykote Longterm W2 SEMI-SYNTHETIC GREASES Molykote PG-75 SYNTHETIC GREASES, PAO Molykote EM-30L Molykote EM-50L Molykote EM-60L Molykote G-4500 Molykote G-4700 Molykote YM-103 SYNTHETIC GREASES, POE Molykote BG-20 SYNTHETIC GREASES, FLUROSILICONE Molykote FS 1292 Molykote FS 3451 Molykote FS 3452 SYNTHETIC GREASES, PFPE Molykote HP-300 Molykote HP-870 SYNTHETIC GREASES, SILICONE Molykote 33 Light Molykote 33 Medium Molykote 41 Molykote 44 Light
Molykote 44 Medium Molykote 55M Dow Corning High Vacuum Grease Molykote PG-21 Molykote PG-54 COMPOUNDS Molykote 111 Compound Dow Corning 4 Compound Dow Corning 7 Compound Dow Corning 340 Heat Sink Compound HIGH PERFORMANCE INDUSTRIAL LUBRICATING OILS MULTI-PURPOSE GEAR OILS Molykote L-0532FG Molykote L-1122 Molykote L-1132 Molykote L-1122FG Molykote L-1146FG CHAIN OILS Molykote L-1428 Molykote L-1468FG Molykote CO 220 Molykote C40 High Temp Lubricant Molykote Omnigliss Molykote MKL-N COMPRESSOR OILS Molykote L-4640 ( Flush oil ) Molykote L-4646 ( POE ) COATINGS ANTI-FRICITON COATINGS Molykote 106 Molykote D-321R Molykote 3400A Leadfree Molykote 3402C Molykote 7400 Molykote 7405 Molykote 7409 Molykote D-10 Molykote PTFE-N UV OTHER COATINGS Molykote Metal Protector Plus SOLVENTS Molykote 7414 DISPERSIONS Molykote M-55 Plus Molykote Multigliss OTHER PRODUCTS Molykote Food Grade Spray Oil Molykote Supergliss Molykote 316 Silicone Release Spray Dow Corning 557 Silicone Spray Molykote S-1011 POWDERS Molykote Microsize Molykote Z
Product Information
Quick-action penetrating agent incorporating corrosion protection, water-repellent and lubricating properties APPLICATIONS
Suitable for frictional contacts, running at low to medium speeds, which are not equipped with grease nipples or oiling holes. Used on joints, levers, chains and other components of transport and conveyor equipment, textile machinery, automatic filling units and all types of packaging equipment.
COMPOSITION
Mineral oil Solid lubricants Corrosion inhibitors Stabilizer
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard Test Color Unit Result Light amber g/ml mm/s C 0.84 11.8 -30 to +80
Density
Density at 20C Viscosity at 40C
Temperature
Service temperature Four-ball tester (VKA) DIN 51 350 pt.4 Weld load Weld scar under 800N load
SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
05/01/1998 DC 3630
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
Solid lubricants Organic binder Solvent
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Dark grey s g/ml % 42 1.16 41
Physical properties
DIN 53211/3 DIN 53217/2 CTM 0242 I Viscosity at 20C (DIN3 cup) Density at 20C Non-volatile content
Temperature
Curing time Curing time Service temperature range ASTM-D2625 ASTM-D2714 Falex load-carrying capacity LFW-1, rotating F=2860N, n=72 minutes, v=7.9m/minutes no. of revolutions x1000 to =0.1 LFW-1, oscillating F=900N, frequency=89.5osc./minutes no. of oscillations to =0.08 minutes/C 60/150 minutes/C 30/180 C -70 to +250 N p=13600* s=11300* p=187*
ASTM-D2714
p=409*
Corrosion protection
ISO/R 1456 Salt spray test h 2 1. * Surface:p = phosphatized, s = sand-blasted. * CTM: Corporate Test Method, copies of CTMs are available on request. ASTM: American Society for Testing and Materials. DIN: Deutsche Industrie Norm
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20m.
Curing
60 minutes at 150C, 30 minutes at 180C (Object temperature).
Solubility
Thinning can be carried out using MOLYKOTE L 13 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
19/11/1998 DC 2935
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
For gas taps and cocks with metal, glass and plastic combinations APPLICATIONS
Used successfully with natural gas stop-cocks of main and secondary lines in domestic equipment, instantaneous water heaters and similar equipment. Lubrication of smaller taps made of metal, glass or plastic.
COMPOSITION
Mineral oil Inorganic thickener Solid lubricants
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Black ca. 3 205-240 0.96 900 42 0 to +160 short term +220 None
Temperature
Service temperature range ISO 2176 Drop point
Resistance
DIN 51 807 T.1 Water resistance, static evaluation step DIN 51 808 Oxidation resistance, pressure drop 100h, bar 99C
Oil separation
DIN 51 817 Standard test % 0.0 1. National Lubricating Grease Institute. * ISO: International Standardisation Organisation DIN: Deutsche Industrie Norm
means of a brush, spatula, grease-gun or automatic lubrication device. Can be used in central lubrication systems. If plastics or elastomers are present, compatibility tests for swelling and
shrinkage, stress-crack formation, changes in strength and hardness, should be carried out because of the difference in their qualities.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
23/11/1998 DC 2941
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" Particularly suitable for long-term lubrication by virtue of its extremely low tendency towards oxidation " High drop point >250C (482F); consequently reduced risk of melting and run-out from lubrication point " Wide service temperature range, -40C to +200C (-40F to +392F); for short periods, up to 230C (446F) " High resistance to water and water washout " Resistant to mineral oil, fuels and many chemicals
c d
" Lubricating grease for metal/metal combinations with slow to medium-fast movements and medium loads over a wide temperature range.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, density, viscosity DIN 51 818 ISO 2137 ISO 2811 DIN 51 562 NLGI consistency class Worked penetration Density at 20C (68F) Base oil viscosity at 25C (77F) Temperature Service temperature C F ISO 2176 Drop point C F ASTM-D147880 Low temperature torque test at -30C (-22F) Initial break-away torque Torque after 20 minutes running time ASTM-D147880 Low temperature torque test at -40C (-40F) Initial break-away torque Torque after 20 minutes running time Load-carrying capacity Four-ball tester (VKA) DIN 51 350 pt.4 Weld load Oil separation DIN 51 817 Standard test % 0.3 * ASTM: American Society for Testing and Materials. ISO: International Standardisation Organisation. DIN: Deutsche Industrie Norm. N 3400 Nm Nm 856x10-3 56x10-3 Nm Nm 118x10-3 41x10-3 -40 to +200 (+230 for short periods) -40 to +392 (+446 for short periods) >250 >482 mm/10 g/ml mm /s
2
Unit
COMPOSITION
" Fluorosilicone oil " Organic thickener
Clean bearing surfaces. Apply grease in the normal way using a brush, grease gun or automatic lubricating system.
MOLYKOTE FS 1292 Grease can be used in centralised lubrication systems. Do not mix with other greases.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 0-2002 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" Extremely high load-carrying capacity " Wear protection and reduction of existing pitting in gear teeth flanks during operation, due to the solid lubricants incorporated in the grease. Extremely adhesive due to build-in adhesion improver " Good protection against corrosion (corrosion index 0 when tested using the SKF-Emcor method) " Contains no lead or nickel
c d
Gearwheel grease for the lubrication of highly stressed open gears and reducing gears made of metal, with a peripheral speed of up to 2.5 m/s APPLICATIONS
" Open gears that are subjected to high stresses and bad weather effects. " Successfully used in crushing plants and in transmission gears and threaded spindles of heavy, crank-driven presses.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, density, viscosity ISO 2137 ISO 2811 DIN 51 562 Unworked penetration Density at 20C (68F) Base oil viscosity at 40C (104F)1 Temperature Service temperature range ISO 2176 Drop point C F C F ASTMD147880 Low temperature torque test at -20C (-4F) Break-away torque Torque after 20 minutes running time DIN 51 805 Nm Nm 880x10-3 115x10-3 1350 -25 to +120 -13 to +248 175 347 mm/10 240-270 g/ml mm2/s 0.96 320 Unit Result Black
COMPOSITION
" " " " " "
Mineral oil Lithium soap Solid lubricants Corrosion inhibitor Adhesion improver EP additives
Kesternich method - flow pressure at -20C (-4F) mbar Loading capacity, protection against wear, service life Four-ball tester
DIN 51 350 T.4 Weld load DIN 51 350 T.5 Wear scar under 800N load Almen-Wieland machine OK load Frictional force with OK load Corrosion protection DIN 51 802 SKF-Emcor method Degree of corrosion Resistance DIN 51 807 T.1 Water resistance, static evaluation step DIN 51 808 Oxidation resistance, pressure drop 100h, 99C (210F)
N mm N N
PACKAGING
Carefully clean the metal surfaces and apply using a spatula or brush.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
High Performance Lubricants Molykote 33 Extreme Low Temperature Bearing Grease, Molykote 41 Extreme High Temperature Bearing Grease, Molykote 44 High Temperature Bearing Grease
FEATURES
x x x x
Resistance to oxidation, moisture and corrosive atmospheres Inertness Good shear stability Wide service temperature range: 33 Extreme Low Temperature Grease: -100 to 400F (-73 to 204C) 41 Extreme High Temperature Grease: 0 to 550F (-18 to 288C) 44 High Temperature Grease: -40 to 400F (-40 to 204C) Compatible with many plastics
Lubricants for antifriction bearings and plastic and rubber parts USES
All three Molykote Bearing Grease are used to lubricate ball bearings operating under light to moderate loads. These can be used for: Molykote 33 Extreme Low Temperature Bearing Grease Freezer cart casters and cold room conveyor equipment Utility disconnect switch contacts Plastic electric clock motors Maximum-demand meters, power-factor meters, watt-hour meters Windshield wiper motor gears Photographic, optical and surveying equipment Oscillographs, geophysical and light, low-torque instruments Starter clutch drives Molykote 41 Extreme High Temperature Bearing Grease Antifriction bearings of high-temperature equipment Oven conveyor bearings Wheel bearings of core oven carts Governor linkage of steam turbines Ball and socket connections of power insulators Molykote 44 High Temperature Bearing Grease Kiln preheater fans, oven fans, radiator cooling fans Textile slashers and driers Aircraft engine Conveyor systems These greases do not soften or affect most plastics and are used to lubricate plastic gears, bearings and cams, as well as metal and rubber parts. Because of low torque requirements, Molykote 33 Extreme Low Temperature Bearing Grease is especially effective in equipment that must start in extreme cold. Oxidation Resistance Molykote Bearing Greases are recommended for use in units that must remain operable when subjected not only to low and high operating temperatures, but also to severe weathering and oxidation.
COMPOSITION
x x
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Method Test
33 Light Color Thickner Base Oil DIN 51 562 ASTM D 217 Base Oil Viscosity @ 25C, mm2/s Penetration, worked 60 strokes, mm NLGI # DIN 51 350 pt4 4 ball weld load, N (kg) Max Dn Value (Bore Size in mm X rpm) Service Temperature2 Degrees C (F)
1
Results
33 Medium Off White Lithium Soap Silicone 100 280 2 1200 (122) 200,000 -73 to 204 (-100 to 400) 226 (439) 1 1.6 0.97 41 Grease Black Carbon Black Silicone 316 280 2 1500 (152) 75,000 -18 to 288 (0 to 550) >300 (>572) 4.8 3 2.6 1.14 44 Light Off White Lithium Soap Silicone 125 300 ~1 1100 (113) 350,000 -40 to 204 (-40 to 400) 220 (432) 2.5 2.4 1.05 44 Medium Off White Lithium Soap Silicone 125 280 2 1100 (113) 300,000 -40 to 204 (-40 to 400) 220 (432) 2 1.4 1.05
Off White Lithium Soap Silicone 100 320 1 1200 (122) 250,000 -73 to 204 (-100 to 400) 226 (439) 2
Oil Separation (Standard Test, 7 days at 40C) % 3.2 Specific Gravity @25C (77F) 0.97
ASTM D 1478-80
Low Temperature Torque @ -73C Initial Break-away Torque, Nm Torque after 20 minutes running time, Nm Low Temperature Torque @ -40C Initial Break-away Torque, Nm Torque after 20 minutes running time, Nm 225 x 10 -3 60 x 10
-3
130 x 10 -3 13 x 10 -3
164 x 10 -3 22 x 10 -3
336 x 10 -3 124 x 10 -3
DIN 51 808
Oxidation Resistance, pressure drop 100hr, 99C (210F) bar (psi) FAG Rolling Element Bearing Tester, FE9, 1500/6000-150, F50, Hrs
0.4 (5.80)
0.1 (1.45)
DIN 51 821-02-A
1 2
110
110
Maximum Dn values are approximations and will vary widely with temperature, load and bearing type. Estimated service temperature range based on product formulation and laboratory testing. Actual service temperature range is dependent on other factors including the specific application environment. 3 Values are at 392F (200C). Specification Writers: Please obtain copies of the Dow Corning Sales Specifications for these products and use them as a basis for your specifications. They may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (989) 496-6000.
Limitations of Typical Organic Greases -100F -20F Molykote 33 Extreme Low Temperature Grease Molykote 41 Extreme High Temperature Grease
May 4, 2006, Molykote DIC164544
260F
450F
550F
Molykote 33 Extreme Low Temperature Bearing Grease Molykote 41 Extreme High Temperature Bearing Grease Molykote 44 High Temperature Bearing Grease Ref. No. 10-814C-01
44 High Temperature
We help you invent the future is a trademark of Dow Corning Corporation. Molykote is a registered trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. Grease 2006 Dow Corning Corporation. All rights reserved.
DESCRIPTION
Molykote 33 Extreme Low Temperature Bearing Grease, Molykote 41 Extreme High Temperature Bearing Grease and Molykote 44 High Temperature Bearing Grease are silicone lubricating oils with thickeners added. Molykote 33 Extreme Low Temperature Bearing Grease and Molykote 44 High Temperature Bearing Grease are thickened with a special lithium soap; Molykote 41 Extreme High Temperature Bearing Grease is thickened with carbon black. Molykote 33 Extreme Low Temperature Bearing Grease and Molykote 44 High Temperature Bearing Grease are available in light and medium consistencies NLGI #1 and #2. Molykote 41 Extreme High Temperature Bearing Grease is available in a medium consistency NLGI #2.
combinations, especially where sliding friction is encountered. Molykote 41 Extreme High Temperature Bearing Grease Bearings operating at extremely high temperatures need to be frequently monitored to ensure that the grease has not dried out. If this occurs, more grease can be added, or the existing grease rejuvenated by adding Dow Corning 710 Fluid. These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
3.6-kg cans, 5-kg pails, 18-kg pails, 25-kg pails, and 180-kg drums.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
SHIPPING LIMITATIONS
None.
LISTINGS/ SPECIFICATIONS
Molykote 33 Extreme Low Temperature Bearing Grease is USDA listed for use as a lubricant where there is no possibility of food contact.
HOW TO USE
Conventional grease application methods brushing, grease gun or automatic application are suitable for use with these Molykote Bearing Greases. Laboratory tests and field reports indicate that heavy duty guns available from such manufacturers as Lincoln-St. Louis are preferred. Note: Extra care should be taken at all times to prevent dirt from contaminating the lubricant. These greases should be packed with a clean metal or ebonite spatula.
PACKAGING
Not all sizes available in all geographies. Molykote 33 Extreme Low Temperature Bearing Grease is supplied in 100-g tubes, 150-g tubes, 400-g cartridges, 1-kg cans, 3.6-kg cans, 18-kg pails, 25-kg pails, 55-kg drums, and 180 kg drums. Molykote 41 Extreme High Temperature Bearing Grease is supplied in 100-g tubes, 150-g tubes, 400-g cartridges, 1-kg cans, 3.6-kg cans, 5-kg pails, 18-kg pails, 25-kg pails, and 181.4-kg drums. Molykote 44 High Temperature Bearing Grease is supplied in 100-g tubes, 150-g tubes, 400-g cartridges,
LIMITATIONS
These greases should not be applied to surfaces that are to be painted. These greases should not be used with highly loaded ferrous metal bearing
Molykote 33 Extreme Low Temperature Bearing Grease Molykote 41 Extreme High Temperature Bearing Grease Molykote 44 High Temperature Bearing Grease Ref. No. 10-814C-01
We help you invent the future is a trademark of Dow Corning Corporation. Molykote is a registered trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2006 Dow Corning Corporation. All rights reserved.
Molykote 33 Extreme Low Temperature Bearing Grease Molykote 41 Extreme High Temperature Bearing Grease Molykote 44 High Temperature Bearing Grease Ref. No. 10-814C-01
We help you invent the future is a trademark of Dow Corning Corporation. Molykote is a registered trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2006 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
Greaselike silicone fluid thickened with metal oxide filler
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Test Color ASTM D 217 Consistency, Penetration unworked worked 60 strokes worked 100,000 strokes Fed. Std. 791, Bleed after 24 hr at 392F (200C) Method 321.2 Fed. Std. 791, Evaporation after 24 hr at 392F (200C) Method 321.2 ASTM D 2265 Drop Point ASTM D 1475 Specific Gravity at 77F (25C) Thermal Conductivity, K Factor CTM1 0069 ASTM D 149 Dielectric Strength2 ASTM D 495 Arc Resistance ASTM D 150 Dielectric Constant, at 100 Hz at 100 kHz ASTM D 150 Dissipation Factor, at 100 Hz at 100 kHz ASTM D 1169 Volume Resistivity ASTM D 4049 Water Spray Off
1 2
Method
Unit
570 (300) 2.1 cal/sec-cm-C 0.0014 volts/mil 210 seconds 165 5 5 0.01 0.02 2 x 1015 1.3
ohm-cm percent
CTMs (Corporate Test Methods) correspond to standard ASTM tests in most instances. Measured using a sample thickness of 50 mils.
DESCRIPTION
Dow Corning 340 Heat Sink Compound is a grease-like silicone material, heavily filled with heat conductive metal oxides. This combination promotes high thermal conductivity, low bleed and high-temperature stability.
The compound resists changes in consistency at temperatures up to approximately 350F (177C). In doing so, it helps maintain a positive heat sink seal to improve heat transfer from the electrical/electronic device to the heat sink or chassis, thereby increasing overall efficiency of the device.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE FROM YOUR DOW CORNING REPRESENTATIVE, OR DISTRIBUTOR, OR BY CALLING YOUR GLOBAL DOW CORNING CONNECTION.
PACKAGING
Dow Corning 340 Heat Sink Compound is available in 5-oz (142-g) tubes, 13.5-oz (383-g) weight/ 5.75-fl oz (170-mL) volume Semco cartridges, 20-lb (9-kg) pails, and 275-lb (124.7-kg) drums for production lines and large scale operations. All weights, net.
information should not be used in substitution for customers tests to ensure that Dow Cornings products are safe, effective, and fully satisfactory for the intended end use. Dow Cornings sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
SHIPPING LIMITATIONS
None.
WARRANTY INFORMATION
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this
AGP5223
Dow Corning is a registered trademark of Dow Corning Corporation. 1997, 1999, 2000 Dow Corning Corporation. All rights reserved.
Product Information
Thermosetting anti-friction coating for metal/metal combinations involving slow to medium-fast movements and medium to heavy loads APPLICATIONS
Suitable for permanent lubrication, with simultaneous corrosion protection, of friction contacts involving high compressive stress and low speeds, and wherever oils or greases cannot be used for technical reasons or are undesirable because of the risk of soiling. Used successfully on hinge pins, plain bearings, cams, keyways and dentate couplings on aircraft, on pins, springs and bearing surfaces of motor-car brakes, moving parts of locks, switches and regulators; on special chains and on all types of magnetic armature.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard Test Color Unit Result Grey g/ml C N 1.2 -200 to +430 p=20000* p=85000*
COMPOSITION
Solid lubricants Corrosion inhibitors Organic binders Solvents
Density
ISO 2811 Density at 20C
Temperature
Service temperature ASTM-D2625 ASTM-D2714 Falex pressure resistance LFW-1, rotating F=2860, N,n=72 rpm, v=7.9 min, no.of revolutions to =0.1 LFW-1, oscillating, load 900N, frequency=89.5 os./min. no. of oscillations to =0.08
p=42000*
1. * Surface: p = phosphatised
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH
HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Product Information
COMPOSITION
Solid lubricants Organic binder Corrosion inhibitor Solvent
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Grey s g/ml % years minutes minutes/C minutes/F C F N 47 1.08 34.5 5 15 120/20 120/68 -200 to +310 -328 to +590 s=10700 s=45
Physical properties
DIN 53211/3 DIN 53217/2 CTM 0242 I Viscosity at 20C or 68F (DIN3 cup) Density at 20C (68F) Non-volatile content Storage life
Temperature
Drying time at 20C (68F) Curing time Curing time Service temperature range Service temperature range ASTM-D2625 ASTM-D2714 Falex load-carrying capacity LFW-1, rotating F=2860N, n=72 minutes, v=7.9m/minutes no. of revolutions x1000 to =0.1 LFW-1, oscillating F=900N, frequency=89.5osc./minutes no. of oscillations to =0.08
ASTM-D2714
s=25
Resistance
Radiation resistance rad 10 1. Surface pretreatment: s = sand blasted. * CTM: Corporate Test Method, copies of CTMs are available on request. ASTM: American Society for Testing and Materials. DIN: Deutsche Industrie Norm
Coating. Phosphatization or sandblasting (180 grid) increases the adhesion and service life.
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20m.
Environment and Regulatory Affairs specialists available in each area. For further information, please consult your local Dow Corning representative.
Curing
120 minutes at 20C (68F).
Solubility
Thinning can be carried out using MOLYKOTE L 13 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Information About MOLYKOTE 3451 Chemical Resistant Bearing Grease and MOLYKOTE 3452 Chemical Resistant Valve Lubricant
Bearing tests show MOLYKOTE 3451 Chemical Resistant Bearing Grease has good life at varying high loads and speeds.
USES MOLYKOTE 3451 Chemical Resistant Bearing Grease MOLYKOTE 3451 Chemical Resistant
Bearing Grease is an exceptional antifriction bearing lubricant especially designed for applications that experience a wide range of temperatures, loads and speeds. It is particularly useful in bearings exposed to harsh chemicals or solvents, bearings used at high speeds and bearings subjected to heavy loads. MOLYKOTE 3451 Bearing Grease can be used on: Chemical mixers Needle bearings in circuit breakers Pumps Processing equipment Fuel- and solvent-handling equipment Sealed-for-life bearings that must operate at high speeds, heavy loads, and high and low temperatures
Type
Fluorosilicone greases
Special Properties
Chemical resistance; good loadcarrying ability, effective in high temperatures
These greases lubricate over a wide temperature range. MOLYKOTE 3451 Chemical Resistant Bearing Grease has good life at temperatures from -40 to 450F (-40 to 232C);MOLYKOTE 3452 Chemical Resistant Valve Lubricant has a serviceable temperature range from -20 to 450F (-29 to 232C). Both MOLYKOTE 3451 Chemical Resistant Bearing Grease and MOLYKOTE 3452 Chemical Resistant Valve Lubricant resist deterioration by solvents, acids, chlorides and other severe chemicals as well as low-pressure steam and condensate. (See Table I.)
Valves protected by MOLYKOTE 3452 Chemical Resistant Valve Lubricant show no evidence of corrosion or degradation of lubricant.
BL17877-1
TYPICAL PROPERTIES These values are not intended for use in preparing specifications.
.................................................................................................... .................................................................................................... .................................................................................................... .................................................................................................... NLGI Consistency ...................................................................... Color ........................................................................................... Thickener ................................................................................... ASTM D 217 Penetration, worked, 60 strokes ................................................ Viscosity of fluorosilicone oil at 100F (38C), SUS ................ Service Temperature Range1, F (C) ...................................... Max. Dn Value2 .......................................................................... Specific Gravity at 77F (25C) ................................................. Fed Std 791 Bleed, at 400F (204C), percent .............................................. ASTM 2265 Evaporation, at 400F (204C), percent ................................... Dropping Point, F (C) ............................................................ ASTM D 1264 Water Washout, at 175F (80C), percent ................................ Fed Std 791a3 4-Ball Weld Load,Kg ................................................................... ASTM D 1478 Low-Temperature Torque starting, g-cm at -40F (-40C) ............................................... running, g-cm after 1 hr at -40F (-40C) .............................
1
Molykote 3451 Chemical Resistant Bearing Grease #2 White Fluorinated polymers 275 2295 -40 to 450 (-40 to 232) 200,000 1.44 2.7 3.7 >536 (>280) 0.3 400 2315 1960
Molykote 3452 Chemical Resistant Valve Lubricant #3 White Fluorinated polymers 270 46,000 -20 to 450 (-31 to 232) 75,000 1.50 1.2 1.1 >570 (>300) 0.1 400
Estimated service temperature range based on product formulation and laboratory testing. Actual service temperature range is dependent on other factors including the specific application environment. 2 Dn value = shaft size of bearing in mm x rpm; based on estimate. 3 Method 6503.
Specification Writers: Please obtain a copy of the Dow Corning Sales Specification for this product and use it as a basis for your specifications. It may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (989) 496-6000.
Table I: Chemical Resistance of MOLYKOTE 3451 Chemical Resistant Bearing Grease and MOLYKOTE 3452 Chemical Resistant Valve Lubricant
.......................................................................................................... .......................................................................................................... .......................................................................................................... After 24 hours at 77F (25C)1 ................................................................................................ Diesel ................................................................................................ Kerosene .......................................................................................... Silicone Fluid ................................................................................... Toluene ............................................................................................ Hexane ............................................................................................. Xylene .............................................................................................. Isopropanol ...................................................................................... Methanol .......................................................................................... VM&P Naphtha ...............................................................................
1 2
MOLYKOTE
3451 Chemical Resistant Bearing Grease Good3 Good Fair Good Fair Good Good Good Good
MOLYKOTE
3452 Chemical Resistant Valve Lubricant Good Good Good Good Fair Good Good Good Good Hydrocarbon Grease2 Poor Fair Poor Poor Poor Poor Fair Fair Poor
Test method Federal Standard 791C-6.2. A lithium-thickened petroleum grease. 3 Good no observable effect on grease [grease slightly soft; poor adhesion]; Fair adhesion.
Figure 1: Percent Volume Change of Various Rubbers in MOLYKOTE 3452 Chemical Resistant Valve Lubricant
MOLYKOTE 3452 Chemical Resistant Valve Lubricant MOLYKOTE 3452 Chemical Resistant
Valve Lubricant is an exceptional valve lubricant and sealant product particularly suited for applications where corrosive or aggressive chemicals are used. MOLYKOTE 3452 Valve Lubricant can be used on: Plug valves Mechanical seals and packings Slow-speed roller and journal bearings Moderate-speed ball bearings Instruments in high vacuum, at high temperatures and in corrosive atmospheres Rotary and reciprocating shaft seals Flexible ball joints
This product is neither tested nor represented as suitable for medical or pharmaceutical uses. HOW TO USE Application MOLYKOTE 3451 Chemical Resistant
Bearing Grease and MOLYKOTE 3452 Chemical Resistant Valve Lubricant can be applied using conventional methods of grease application brushing, grease gun or automatic applicators.
SHIPPING LIMITATIONS
None.
Unless Dow Corning provides you with a specific written warranty of fitness for a particular use, Dow Corning s sole warranty is that the product or products, as supplied, will meet Dow Corning s then current sales specifications. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR USE. Your exclusive remedy and Dow Corning s sole liability for breach of warranty is limited to refund of the purchase price or replacement of any product shown to be other than as warranted, and Dow Corning expressly disclaims any liability for incidental or consequential damages.
Dow Corning is a registered trademark of Dow Corning Corporation. 1994, 1998 Dow Corning Corporation. All rights reserved. Printed in USA
AGP3853A
Product Information
Specialty Lubricants
FEATURES
" Low evaporation " High oxidation resistance " Wide service temperature range, -30C to +230C (-22F to +446F) " High resistance to water and water washout " Resistant to most solvents and chemicals " Compatible with many plastics and elastomers
c d
Lubricating and sealing grease for metal/metal, metal/plastic and metal/elastomer combinations involving slow movements and heavy loadings over very wide temperature ranges, particularly under unfavorable environmental influences APPLICATIONS
" Suitable for the above friction contacts and service conditions. " Successfully used on valves, mechanical seals and pumps, ball-and socket-joints, bearings, on loading arms for ships and vacuum contained equipment.
COMPOSITION
" Fluorosilicone oil " PTFE thickener
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, density, viscosity DIN 51 818 ISO 2137 ISO 2811 NLGI consistency class Worked penetration Density at 20C (68F) Base oil viscosity at 25C (77F) Temperature Service temperature ISO 2176 Drop point C F C F ASTM-D147880 Low temperature torque test at -20C (-4F) Initial break-away torque Torque after 20 minutes running time DIN 51 805 Kesternich method - flow pressure at -20C (-4F) Four-ball tester (VKA) DIN 51 350 pt.4 Weld load Almen-Wieland machine OK load Frictional force with OK load Resistance DIN 51 807 pt.1 Water resistance, static evaluation step DIN 51 808 Oxidation resistance, pressure drop 100h, 99C (210F) bar 0-90 0.0 N N 15500 3500 N 4400 Nm Nm mbar 392x10-3 94x10-3 280 -30 to +230 -22 to +446 >220 >428 mm/10 g/ml mm2/s 2-3 240-280 1.47 10000 Unit Result White
PACKAGING
Clean bearing surfaces. Apply grease in the normal way using a brush or grease gun. Do not mix with other greases. Due to variation in quality of plastics and elastomers, compatibility tests should be carried out for swelling and shrinkage, stress-crack formation, and changes in strength and hardness.
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
HANDLING PRECAUTIONS
Hands should be washed before eating, drinking or smoking. Avoid contact with the eyes and skin. Traces of toxic trifluoropropionaldehyde may be formed at temperatures of >150C (>302F). Adequate ventilation must be provided in enclosed spaces. At temperatures above 290C (554F), fluorine and hydrogen fluoride may be evoked. Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1999-2002 Dow Corning Corporation. All rights reserved.
Product Information
Dow Corning 7 Release Compound, Dow Corning 4 Electrical Insulating Compound and Dow Corning 111 Valve Lubricant & Sealant
Dimethyl silicone compounds for a variety of lubrication and protection applications USES
Dow Corning 7 Release Compound can be used in applications including: Mold release agent for foundry shell and core molds Break-in treatment for bladders on tire presses Rubber lubricant and preservative Release agent for adhesives and glues Airframe lubricant Cable-pulling lubricant to draw rubber-covered cable through conduit Release agent for plastic extruders and processing equipment Release agent for plastic film packaging machines Uses of Dow Corning 4 Electrical Insulating Compound include: Moisture-proof seal for aircraft, automotive and marine ignition systems and spark plug connections Waterproof electrical connections Electrical assemblies and terminals Seal and lubricant for cable connectors, battery terminals, rubber door seals and rubber and plastic O-rings Assembly lubricant for various metal-on-plastic and metal-on-rubber combinations Lubrication for control and pressure plug valves Dow Corning 111 Valve Lubricant & Sealant can be used in applications such as: Sealant for vacuum and pressure systems Sealant for outdoor equipment, including shipboard applications, subject to washing and harsh environments; meters; electrical service entrance and underground connections Damping medium for dash pots in electrical and electronic equipment Chemical barrier coating Antistick and sealant for transformer gaskets and equipment enclosures, which help prevent gaskets from sticking to metal and resist weathering and water washout Lubricant for rubber and plastic O-rings (see Use Limitations) Sealant for gaskets and seals Lubricant for water softener and faucet valves Valve stem lubricant for potable water Aircraft vacuum systems
FEATURES
Maintain serviceable consistency from -70 to 400F (-57 to 204C) Practically nonvolatile Odorless Resistant to a wide range of chemicals; generally resistant to mineral oils, vegetable oils, air, dilute acids, alkalines and most aqueous solutions; Dow Corning 111 Valve Lubricant & Sealant is quite resistant to a variety of organic and inorganic chemicals Moisture resistant Electrically insulating Excellent rubber lubrication Excellent release and sealing properties Resistant to oxidation Essentially nontoxic and nonmelting Show little tendency to dry out in service
COMPOSITION
Greaselike materials containing an inert amorphous silica filler in combination with selected polydimethyl silicone fluids
DESCRIPTION
Dimethyl silicone compounds come in three basic consistencies: Light Dow Corning 7 Release Compound Medium Dow Corning 4 Electrical Insulating Compound Heavy Dow Corning 111 Valve Lubricant & Sealant
silicone-treated surfaces. If contaminated by a silicone coating, parts can be wiped or washed with solvent or washed with detergent. To O-rings or other components made of silicone rubber because they can deteriorate the silicone rubber. These compounds will also slightly swell natural butyl rubbers. Any rubber should be tested for excessive swell or shrink. Because each application may vary in chemical composition, pressure, flow velocity, relubrication requirements and equipment design, the silicone compound should be tested before adopting for regular use. These compounds are not intended for use with liquid oxygen or other strong oxidizing chemicals and should not be used in applications requiring LOX compatibility. These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
LISTINGS/ SPECIFICATIONS
These compounds are permitted for food contact use under FDA Regulation 21 CFR 175.300, covering polymeric coatings applied as continuous film over a metal substrate. Additionally, these compounds are listed under NSF Standard 51 for use in food processing equipment and NSF Standard 61 for use in potable water applications. Dow Corning 4 Electrical Insulating Compound is designed to meet the requirements of SAE AS 8660.
HOW TO USE
For best results, clean and dry surfaces before application. Dow Corning silicone compounds can be applied by hand, by specially designed automated equipment, or by brushing or wiping. When using some high pressure dispensing equipment, separation and compaction can occur. Certain designs of grease guns may seize with silicone compounds; test prior to using. Where a thinner consistency is needed, the compound can be dispersed in a solvent and applied by brushing or spraying.1
SHIPPING LIMITATIONS
None.
PACKAGING
These Dow Corning silicone compounds are supplied in 5.3-oz (150g) tubes, 8-lb (3.6-kg) cans, 40-lb (18.1-kg) pails and 440-lb (199.6-kg) drums. Dow Corning 111 Valve Lubricant & Sealant is also available in 14.1-fl oz (400-g) cartridges.
USE LIMITATIONS
These specific Dow Corning compounds should not be applied: To any surface that will be painted or finished. Such coatings may not adhere to the
Follow solvent manufacturers recommended safe handling instructions and applicable federal, state and local regulations.
TYPICAL PROPERTIES
These values are not intended for use in preparing specifications. Method Test Unit Dow Corning 7 Relase Compound White, translucent #1 270 322 6.5 0.8 -40 to 400 (-40 to 204) None 1.0 Yes Result Dow Corning 4 Electrical Insulating Compound White, translucent #2 240 279 4.5 1.4 -70 to 400 (-57 to 204) None 1.0 Yes Dow Corning 111 Valve Lubricant & Sealant White, translucent #3 205 217 0.05 1.1 -40 to 400 (-40 to 204) None 1.0 Yes
Color
NLGI Penetration, worked 60 worked 100,000 CTM 0033A Bleed, 24 hr/392F (200C) CTM 0033A Evaporation, 24 hr/392F (200C) Service Temperature Range Melting Point Specific Gravity at 77F (25C) FDA Recognition, 21 CFR 175.300 Dielectric Constant, at 100 Hz at 100 kHz Dissipation Factor, at 100 Hz at 100 kHz Dielectric Strength, 50 mil gap Volume Resistivity at 73F (23C) Arc Resistance
CTM 0112
CTMs (Corporate Test Methods) correspond to standard ASTM tests in most instances. Copies of CTMs are available upon request.
Specification Writers: Please obtain copies of the Dow Corning Sales Specifications for these products and use them as a basis for your specifications. They may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (989) 496-6000.
FPH 29249
Dow Corning is a registered trademark of Dow Corning Corporation. 1996, 1999, 2002 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" " " "
MOLYKOTE 41 Grease
c d
This is a silicone grease that can be used at temperatures higher than those of normal silicone greases APPLICATIONS
" Ideal for use in oven conveyers, kiln dollies, molten salt evacuation pumps, steam turbine regulator links, knife-edge power breakers, etc.
Does not melt, even at high temperatures Superior thermal stability Superior oxidation resistance Water resistant
COMPOSITION
" Silicone oil " Carbon black " Corrosion inhibitor
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Parameter Appearance Base oil viscosity at 25C JIS K 2220 Penetration (worked 60 times) NLGI class Service temperature range Density JIS K 2220 MIL S 8660 MIL S 8660 JIS K 2220 Drop point Bleed (150C/24 hours) Evaporation (150C/24 hours) Water washout (38C/1 hour) Maximum Dn value *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials. MIL: Military Specification and Standards. C g/cm C % % % N mm/ minute
3
Unit mm /s
2
Value Black 316 260 to 300 2 -20 to 290 1.1 None 4.0 1.0 0.5 1500 75,000
mm/10
HOW TO USE
Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device. Do not use on painted surfaces. Do not use on steel bearing under high loads.
HANDLING PRECAUTIONS
This product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling.
When stored, unopened in a cool, dark place this product, has a usable life of 36 months from the date of production.
PACKAGING
CAUTION
1. Data included in this document are average values, not specification values. Any applications for this product given in this document are merely examples. Perform thorough evaluations to confirm functionality, effectiveness, and safety before use. 2. No guarantees are made that the applications described in this document are free from infringements of any patent. 3. This product was developed for industrial use, and is not intended for use in medical equipment, pharmaceutical products, etc. 4. Be sure to read the material safety data sheet (MSDS) and container label for this product before use. 5. Contact Dow Corning Asia, Ltd., before reproducing any data from this document. WE HELP YOU INVENT THE FUTURE."
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 2002 Dow Corning Corporation. All rights reserved.
Product Information
FEATURES
x High oxidation resistance x Wide service temperature range (-65C to 175C) x Compatable with most plastics x Good corrosion protection
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Standard* Parameter Unit Appearance Base oil viscosity at 25C mm/s JIS K 2220 Penetration (worked 60 times) mm/10 NLGI class Service temperature range C Density g/cm JIS K 2220 Drop point C Fed Std 791 Bleed (150C/24 hours) % Fed Std 791 Evaporation (150C/24 hours) % JIS K 2220 Oxidation resistance (99C/500 hours) MPa JIS K 2220 Water washout (38C/1 hour) % DIN 51 802 Emcor corrosion test *JIS: Japanese Industrial Standard. Fed Std: Federal Standard DIN: Deutsches Industrie Norm. Result off-white 100 300 to 340 1 -65 to 175 1.0 220 3.0 1.4 0.01 4.2 0
COMPOSITION
x Silicone oil x Ester x Lithium soap
HOW TO USE
Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device. Compatibility with plastics may vary depending on the type and grade of the plastic. Performs adequate compatibility testing in advance. This grease is not compatible with silicone rubber.
HANDLING PRECAUTIONS
This product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling.
PACKAGING
This product is available in 5kg cans. CAUTION 1. Data included in this document are average values, not specification values. Any applications for this product given in this document are merely examples. Perform thorough evaluations to confirm functionality, effectiveness, and safety before use. 2. No guarantees are made that the applications described in this document are free from infringements of any patent. 3. This product was developed for industrial use, and is not intended for use in medical equipment, pharmaceutical products, etc. 4. Be sure to read the material safety data sheet (MSDS) and container label for this product before use. 5. Contact Dow Corning Asia, Ltd., before reproducing any data from this document.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2006 Dow Corning Corporation. All rights reserved.
Product Information
Extreme-pressure, dry film lubricant provides exceptional release and lubricating properties APPLICATIONS
Dow Corning 557 Silicone Dry Film Lubricant can be used: In steel production where it can increase slitter-blade life, resulting in clean, square edges In aluminum production where it can lengthen the life of tools and dies, improve surface finish, lubricate sliding surfaces and surfaces during extruding, deep drawing or spinning In machine shops where it can improve surface finishes; extend the life of cutting tools, taps, dies, drills, slitters, and forming tools; reduce wear and reduce stick-slip or metal seizure on bearings, slides, cams adjusting screws, guides and ways For textile, paper and woodworking industries where it can reduce wear and friction and reduce product staining from spinning frames, knives, scissors, punches, chain, conveyors or material-handling equipment For rubber and plastic industries where it can reduce sticking, pickup or product contamination from handling equipment, knives, conveyors or sliding surfaces
COMPOSITION
Waxlike, extreme-pressure lubricant Supplied as liquid or aerosol; remains as wax film after solvent evaporation
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Method As Supplied CTM1 0137A Test Color Specific Gravity Flash Point2 Service Temperature Range3 Drying Time Solvent, bulk Unit Result Clear 0.77 39 (102) -40 to 43 (-40 to 110) 30 Naphtha Clear wax film 32-46 (90-115) No stick-slip 1200 0.85 0.07
As Applied Appearance Melting Range Press Fit4 ASTM D 2596 Four Ball Weld Load Fed Std 791a5 Four Ball Wear Scar Coefficient of Friction4
1
C (F) N mm
Corporate Test Methods (CTMs) correspond to standard ASTM tests in most instances. Copies of CTMs are available upon request. 2 Bulk form only. 3 Estimated service temperature range based on product formulation and laboratory testing. Actual service temperature range is dependent on other factors including the specific application environment. 4 Tested on a Falex LFW-4 Press Fit tester, steel vs. steel, Rc60, 0.6-inch per minute, 12,000 psi in air, room temperature. 5 Method 6514.1.
DESCRIPTION
Dow Corning 557 Silicone Dry Film Lubricant is: An extreme-pressure lubricant with exceptional release properties for cutting and forming metals, and with lubricating properties for heavily loaded tracks, cams, slides, etc. Colorless in thin films Nonstaining to paper or fabrics The solvent evaporates after application, leaving a nearly transparent, thin film. This lubricant film begins to melt at 32C (90F) and adheres tenaciously to most surfaces, whether in a solid or fluid state.
In most dip operations, excessive solvent loss is unavoidable and the solvent must be replenished. Adding naphtha alone will not suffice. The solvent component consists of 94 percent naphtha (41C [105F] flash point) mixed with methyl amyl alcohol. This premix should be added to the depleted product that has been heated to 32C (90F) and stirred until all wax solids have gone back into solution. Methyl amyl alcohol can be added up to 8 percent, but not less than 6 percent of the solvent mixture. The amount of premix solvent to be added can be determined through experience or by conducting a percent solids test by weighing a well-mixed 3-g (0.1-oz) sample, heating to 105C (221F) for 20 minutes and weighing the remaining wax at room temperature. When adding solvent, strive for no more than 8 percent wax solids unless a thicker film is desired than provided by the standard formulation. This rejuvenation process should work three to four times after which the used material should be replaced with fresh product.
LISTINGS/SPECIFICATIONS
Dow Corning 557 Silicone Dry Film Lubricant is authorized for use in official establishments operating under the Federal Meat And Poultry Inspection Program (formerly USDA H2 ratings) where there is no possibility of food contact.
Removal of Film
Dow Corning 557 Silicone Dry Film Lubricant may be removed by most solvents or by vapor degreasing.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE FROM YOUR DOW CORNING REPRESENTATIVE, OR DISTRIBUTOR, OR BY CALLING YOUR GLOBAL DOW CORNING CONNECTION.
product packaging for Use By date. When stored at or below 4C (40F), solid material may precipitate. When the material is warmed to room temperature, this material will readily redissolve without affecting lubrication properties.
WARRANTY INFORMATION
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers tests to ensure that Dow Cornings products are safe, effective, and fully satisfactory for the intended end use. Dow Cornings sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
PACKAGING
Dow Corning 557 Silicone Dry Film Lubricant is supplied in aerosol cans containing 312 g (11 oz), in 15.1-kg (5-gal) pails and in 166.4-kg (55-gal) drums. All weights, net.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
SHIPPING LIMITATIONS
Dow Corning 557 Silicone Dry Film Lubricant is a combustible material. Dow Corning 557 Silicone Dry Film Lubricant Spray has the DOT Classification: Compressed gas NOS flammable gas.
AGP4934
Dow Corning is a registered trademark of Dow Corning Corporation. 1993, 1998, 2000 Dow Corning Corporation. All rights reserved.
Product Information
Dow Corning 7 Release Compound, Dow Corning 4 Electrical Insulating Compound and Dow Corning 111 Valve Lubricant & Sealant
Dimethyl silicone compounds for a variety of lubrication and protection applications USES
Dow Corning 7 Release Compound can be used in applications including: Mold release agent for foundry shell and core molds Break-in treatment for bladders on tire presses Rubber lubricant and preservative Release agent for adhesives and glues Airframe lubricant Cable-pulling lubricant to draw rubber-covered cable through conduit Release agent for plastic extruders and processing equipment Release agent for plastic film packaging machines Uses of Dow Corning 4 Electrical Insulating Compound include: Moisture-proof seal for aircraft, automotive and marine ignition systems and spark plug connections Waterproof electrical connections Electrical assemblies and terminals Seal and lubricant for cable connectors, battery terminals, rubber door seals and rubber and plastic O-rings Assembly lubricant for various metal-on-plastic and metal-on-rubber combinations Lubrication for control and pressure plug valves Dow Corning 111 Valve Lubricant & Sealant can be used in applications such as: Sealant for vacuum and pressure systems Sealant for outdoor equipment, including shipboard applications, subject to washing and harsh environments; meters; electrical service entrance and underground connections Damping medium for dash pots in electrical and electronic equipment Chemical barrier coating Antistick and sealant for transformer gaskets and equipment enclosures, which help prevent gaskets from sticking to metal and resist weathering and water washout Lubricant for rubber and plastic O-rings (see Use Limitations) Sealant for gaskets and seals Lubricant for water softener and faucet valves Valve stem lubricant for potable water Aircraft vacuum systems
FEATURES
Maintain serviceable consistency from -70 to 400F (-57 to 204C) Practically nonvolatile Odorless Resistant to a wide range of chemicals; generally resistant to mineral oils, vegetable oils, air, dilute acids, alkalines and most aqueous solutions; Dow Corning 111 Valve Lubricant & Sealant is quite resistant to a variety of organic and inorganic chemicals Moisture resistant Electrically insulating Excellent rubber lubrication Excellent release and sealing properties Resistant to oxidation Essentially nontoxic and nonmelting Show little tendency to dry out in service
COMPOSITION
Greaselike materials containing an inert amorphous silica filler in combination with selected polydimethyl silicone fluids
DESCRIPTION
Dimethyl silicone compounds come in three basic consistencies: Light Dow Corning 7 Release Compound Medium Dow Corning 4 Electrical Insulating Compound Heavy Dow Corning 111 Valve Lubricant & Sealant
silicone-treated surfaces. If contaminated by a silicone coating, parts can be wiped or washed with solvent or washed with detergent. To O-rings or other components made of silicone rubber because they can deteriorate the silicone rubber. These compounds will also slightly swell natural butyl rubbers. Any rubber should be tested for excessive swell or shrink. Because each application may vary in chemical composition, pressure, flow velocity, relubrication requirements and equipment design, the silicone compound should be tested before adopting for regular use. These compounds are not intended for use with liquid oxygen or other strong oxidizing chemicals and should not be used in applications requiring LOX compatibility. These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
LISTINGS/ SPECIFICATIONS
These compounds are permitted for food contact use under FDA Regulation 21 CFR 175.300, covering polymeric coatings applied as continuous film over a metal substrate. Additionally, these compounds are listed under NSF Standard 51 for use in food processing equipment and NSF Standard 61 for use in potable water applications. Dow Corning 4 Electrical Insulating Compound is designed to meet the requirements of SAE AS 8660.
HOW TO USE
For best results, clean and dry surfaces before application. Dow Corning silicone compounds can be applied by hand, by specially designed automated equipment, or by brushing or wiping. When using some high pressure dispensing equipment, separation and compaction can occur. Certain designs of grease guns may seize with silicone compounds; test prior to using. Where a thinner consistency is needed, the compound can be dispersed in a solvent and applied by brushing or spraying.1
SHIPPING LIMITATIONS
None.
PACKAGING
These Dow Corning silicone compounds are supplied in 5.3-oz (150g) tubes, 8-lb (3.6-kg) cans, 40-lb (18.1-kg) pails and 440-lb (199.6-kg) drums. Dow Corning 111 Valve Lubricant & Sealant is also available in 14.1-fl oz (400-g) cartridges.
USE LIMITATIONS
These specific Dow Corning compounds should not be applied: To any surface that will be painted or finished. Such coatings may not adhere to the
Follow solvent manufacturers recommended safe handling instructions and applicable federal, state and local regulations.
TYPICAL PROPERTIES
These values are not intended for use in preparing specifications. Method Test Unit Dow Corning 7 Relase Compound White, translucent #1 270 322 6.5 0.8 -40 to 400 (-40 to 204) None 1.0 Yes Result Dow Corning 4 Electrical Insulating Compound White, translucent #2 240 279 4.5 1.4 -70 to 400 (-57 to 204) None 1.0 Yes Dow Corning 111 Valve Lubricant & Sealant White, translucent #3 205 217 0.05 1.1 -40 to 400 (-40 to 204) None 1.0 Yes
Color
NLGI Penetration, worked 60 worked 100,000 CTM 0033A Bleed, 24 hr/392F (200C) CTM 0033A Evaporation, 24 hr/392F (200C) Service Temperature Range Melting Point Specific Gravity at 77F (25C) FDA Recognition, 21 CFR 175.300 Dielectric Constant, at 100 Hz at 100 kHz Dissipation Factor, at 100 Hz at 100 kHz Dielectric Strength, 50 mil gap Volume Resistivity at 73F (23C) Arc Resistance
CTM 0112
CTMs (Corporate Test Methods) correspond to standard ASTM tests in most instances. Copies of CTMs are available upon request.
Specification Writers: Please obtain copies of the Dow Corning Sales Specifications for these products and use them as a basis for your specifications. They may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (989) 496-6000.
FPH 29249
Dow Corning is a registered trademark of Dow Corning Corporation. 1996, 1999, 2002 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
Solid lubricants Inhibitor Organic binder Water Stabilisers
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Dark grey s g/ml % months minutes min/C min/C min/C C N 24 1.16 30 8 12 15 40/23 10/50 5/90 -70 to +200 p=11300 s=7900 p=343
Physical properties
DIN 53211/4 DIN 53217/2 CTM 0242 I CTM 0007 A Viscosity at 20C (DIN4 cup) Density at 20C Nonvolatile content pH at 20C Storage life
Temperature
Drying time at 20C Curing time Curing time Curing time Service temperature range ASTM-D2625 ASTM-D2714 Falex load-carrying capacity LFW-1, rotating F=2860N, n=72 minutes, v=7.9m/minutes no. of revolutions x1000 to =0.1 LFW-1, oscillating F=900N, frequency=89.5osc./minutes no. of oscillations to =0.08
p=76
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20m.
Curing
40 minutes at 23C, 10 minutes at 50C, 5 minutes at 90C (Object temperature).
Solubility
Thinning can be carried out using distilled water or tap water.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
Product Information
COMPOSITION
Solid lubricants Inhibitor Organic binder Water Stabilisers
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Dark grey s g/ml % months minutes min/C min/C min/C C N 24 1.16 30 8 12 15 40/23 10/50 5/90 -70 to +200 p=11300 s=7900 p=343
Physical properties
DIN 53211/4 DIN 53217/2 CTM 0242 I CTM 0007 A Viscosity at 20C (DIN4 cup) Density at 20C Nonvolatile content pH at 20C Storage life
Temperature
Drying time at 20C Curing time Curing time Curing time Service temperature range ASTM-D2625 ASTM-D2714 Falex load-carrying capacity LFW-1, rotating F=2860N, n=72 minutes, v=7.9m/minutes no. of revolutions x1000 to =0.1 LFW-1, oscillating F=900N, frequency=89.5osc./minutes no. of oscillations to =0.08
p=76
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20m.
Curing
40 minutes at 23C, 10 minutes at 50C, 5 minutes at 90C (Object temperature).
Solubility
Thinning can be carried out using distilled water or tap water.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
Product Information
Physical properties
DIN 53217/2 Density at 20C Storage life Falex load-carrying capacity LFW-1, rotating F=680 N, n=72 min, v=7.9 m/minutes no. of revolutions x1000 to =0.08 LFW-1, oscillating F=900N, frequency=89.5osc./minutes no. of oscillations x1000 to =0.08 Fretting corrosion - Deyber tester
ASTM-D2714
p=4
Coefficient of friction
Screw test: Erichsen, thread Screw test: Erichsen, head 1. Surface pretreatment: b=blank, p=phosphated * ASTM: American Society for Testing and Materials. DIN: Deutsche Industrie Norm
How to apply
Stir the Anti-Friction Coating thoroughly before applying by spraying, dipping, centrifuging, brushing or printing. Recommended dry film thickness: 5 to 20m.
Curing
60 minutes at 120C (object temperature).
Solubility
Thinning can be carried out using MOLYKOTE7414 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
07/12/1998 DC 2913
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1998-2001 Dow Corning Corporation. All rights reserved.
Product Information
SPECIFICATIONS
Complies with TL 8010-026/1 BWB...-MBB...
COMPOSITION
Solid lubricants Organic binder Solvent
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Greyish black g/ml % years min/C min/C C N 1.10 31 5 30/220 120/150 -70 to 380 s=14700 p=364
Physical properties
DIN 53217/2 CTM 0242 I Density at 20C Nonvolatile content Storage life
Temperature
Curing time Curing time Service temperature range ASTM-D2625 ASTM-D2714 Falex load-carrying capacity LFW-1, rotating F=2860N, n=72 minutes, v=7.9m/minutes no. of revolutions x1000 to =0.1 LFW-1, oscillating F=900N, frequency=89.5osc./minutes no. of oscillations to =0.08
ASTM-D2714
p=214
Resistance
Radiation resistance rad 10{ 1. Surface pretreatment: p=phosphated, s=sand blasted. * CTM: Corporate Test Method, copies of CTMs are available on request. ASTM: American Society for Testing and Materials. DIN: Deutsche Industrie Norm
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20m.
Curing
120 minutes at 150C 30 minutes at 220C (Object temperature).
Solubility
Thinning can be carried out using MOLYKOTE7414 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
16/11/1998 DC 2914
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
Organic solvent
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Transparent g/ml C years 1.03 91 2
Physical properties
DIM 53217/2 DIN 51758 Density at 25C Flash point Storage life
HOW TO USE
Dilute the Anti-Friction Coating up to 20% with MOLYKOTE 7414 Thinner. Stir thoroughly before applying the diluted product.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
For further information, please consult your local Dow Corning representative.
07/12/1998 DC 4089
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1998-2001 Dow Corning Corporation. All rights reserved.
Product Information
Synthetic grease handles high speed, high load, high temperature combinations APPLICATIONS
Advantageous in applications that experience high temperatures and extreme pressure or high speed, such as ball bearings of electrical motors, fans, calenders, presses, metal working machines, generators, utility switch contacts, spindles, dryers or other applications
COMPOSITION
Polyolester grease with lithium complex thickener NLGI #2 Grease
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Method Test Unit Result Color Beige Oil Base Ester Base Oil Viscosity, at 38C (100F) SUS 200 Thickener Lithium complex Specific Gravity 1.01 Penetration, worked 60 mm/10 270 Service Temperature Range, estimated C (F) -45 to 182 (-50 to 360) Dropping Point C (F) >300 (>572) Water Washout percent 2 Oil Separation, 24 hr at 150C (302F) percent 2.2 Four-Ball Test, Weld Load kg 265 Four-Ball Test, Wear Scar, 1 hour at 75C (167F), 400 N mm 0.87 Dn Value (shaft size of bearing in mm x rpm), estimated 550,000 Almen-Wieland Machine OK Load N 20,000 Low Temperature Torque Test -20C (-4F) Nm 207 x 10-3 -50C (-58F) Nm 530 x 10-3 Low Temperature Torque Test, after 20 minute run -20C (-4F) Nm 130 x 10-3 -50C (-58F) Nm 130 x 10-3 FAG Bearing Test, angular contact thrust ball bearings 160C (320F), 1500 N, 6000 rpm hours 662 Corrosion Protection, SKF Emcor rating 1-2
ASTM D 217 ASTM D 566 ASTM D 1264 Fed Std 791C ASTM D 2596 ASTM D 2266
ASTM D 1478
ASTM D 1478
DIN 51802
1
Dn values are calculated approximations and will vary widely with temperature, load and bearing type.
DESCRIPTION
Molykote BG 20 High Performance Synthetic Grease is a synthetic complex grease with outstanding properties including a wide temperature range estimated at -45 to 182C (-50 to 360F) and a high load-carrying
capacity. It combines the most important properties of silicone grease (wide temperature range) and solid lubricantcontaining organic greases (high loadcarrying capacity) in an ester-based grease.
HOW TO USE
Apply Molykote BG 20 High Performance Synthetic Grease like any other grease. Follow instructions of bearing manufacturers. For optimum performance, Molykote BG 20 High Performance Synthetic Grease should not be mixed with other greases.
to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers tests to ensure that Dow Cornings products are safe, effective, and fully satisfactory for the intended end use. Dow Cornings sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE FROM YOUR DOW CORNING REPRESENTATIVE, OR DISTRIBUTOR, OR BY CALLING YOUR GLOBAL DOW CORNING CONNECTION.
PACKAGING
Molykote BG 20 High Performance Synthetic Grease is supplied in tubes, cartridges, and pails.
LIMITATIONS
This product is neither tested nor re resented as suitable for medical or ph rmaceutical uses.
SHIPPING LIMITATIONS
None.
WARRANTY INFORMATION
The information contained herein is offered in good faith and is believed
AGP4934
Dow Corning is a registered trademark of Dow Corning Corporation. 1992, 1998, 2000 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" Superior load carrying capability " Extended time possible between applications " Good oxidation resistance " Can provide lubrication under conditions where it is difficult to create oil film " Reduces wear " Superior water resistance " Superior corrosion resistance " Prevents fretting corrosion
c d
Premium lithium soap grease including solid lubricants with excellent lubricating capabilities for metal-on-metal friction under heavy loads at slow to fast speeds APPLICATIONS
" Ideally suited for roller bearings, slide bearings, guides, roller guides, ball joints, splines, small low-speed gears, and as an automotive chassis grease.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* JIS K 2220 JIS K 2220 JIS K 2220 JIS K 2220 JIS K 2220 JIS K 2220 Parameter Appearance Penetration (worked 60 times) NLGI class Drop point Service temperature range1 Bleed (100C 24 hours) Evaporation (99C 22 hours) Oxidation resistance (99C 100 hours) Water washout (38C/1 hour) Shell four ball test OK load Wear scar (1 hour, 800N) DIN 51821-02-A FAG bearing test, type FE9 (6000rpm, 130C, 4500N) DN value Corrosion resistance test ASTM D1743 Humidity corrosion SKF Emcor test 1. Up to 150C for short periods of time. *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials. DIN:Deutsches Industrie Norm. 1 (None) 0 (None) hours mm/min 40 450,000 C C % % MPa % N mm mm/10 Unit Value Black 265 to 295 2 185 -30 to 130 2.0 0.2 0.03 1.0 3150 1.2
COMPOSITION
" " " " "
HOW TO USE
Clean points of contact. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device. Can also be used in a centralized lubrication system.
PACKAGING
This product is available in 1kg cans (10 cans/case) and 16kg pails. CAUTION 1. Data included in this document are average values, not specification values. Any applications for this product given in this document are merely examples. Perform thorough evaluations to confirm functionality, effectiveness, and safety before use. 2. No guarantees are made that the applications described in this document are free from infringements of any patent. 3. This product was developed for industrial use, and is not intended for use in medical equipment, pharmaceutical products, etc. 4. Be sure to read the material safety data sheet (MSDS) and container label for this product before use. 5. Contact Dow Corning Asia, Ltd., before reproducing any data from this document. WE HELP YOU INVENT THE FUTURE."
HANDLING PRECAUTIONS
This product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling.
When stored, unopened in a cool, dark place this product, has a usable life of 60 months from the date of production.
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 2002 Dow Corning Corporation. All rights reserved.
Product Information
APPLICATION
x Suitable for lubrication of chains. x Wide service temperature range
COMPOSITION
Synthetic oil Antioxidant EP additives
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local DowCorning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Brownish, transparent 0.94 220
Density, viscosity
DIN 51 757 DIN 51 562 Density at 20C Viscosity at 40C g/ml mm/s
C F
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOWCORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest DowCorning sales office or DowCorning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
30/11/1998 DC 3006
MOLYKOTE is a registered trademark of DowCorning Corporation. 1997-2001 DowCorning Corporation. All rights reserved.
Type
Dispersion of solid lubricants in solvent-based resin binder
Physical Form
Viscous liquid
Special Properties
Long-term wear resistance
Primary Uses
Film lubricant for applications that require help to reduce piston and cylinder wall wear during break-in, cold-start, and ongoing operation situations
Cure
Suggested cure times are 30 minutes at 180C (356F) or 60 to 120 minutes at 150C (302F). NOTE: Actual curing times vary with substrate size, mass, and material; coating thickness; type of curing oven; and other factors. To assure proper cure and adhesion of the coating, specific tests can be performed. Contact your Dow Corning representative for further details on process application guidelines.
LIMITATIONS
Not intended for medical use.
SHIPPING LIMITATIONS
None.
TYPICAL PROPERTIES These values are not intended for use in preparing specifications. As Supplied ASTM D 1200 ASTM D 1298 ASTM 3941 As Cured ASTM B 117 ASTM D 2625 ASTM D 2714 Viscosity, 25C (77F), cps ......................................................... 27,500 Density, 20C (68F), g/cm3 ........................................................... 1.3 Flash Point, C (F) ................................................................ 63 (145) Corrosion Resistance, hours ......................................................... >300 Falex Pressure Resistance, phosphate pretreatment, N (lb) ............................... 10,800 (2430) LFW-1, rotating, number of revolutions until =0.1 ........................... 5,500 oscillating, number of oscillations until =0.08 ..................... 1,000 coefficient of friction, after running in, ..................................<0.1
Specification Writers: Please obtain a copy of the Dow Corning Sales Specification for this product and use it as a basis for your specifications. It may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (517) 496-6000.
Molykote is a registered trademark of Dow Corning Corporation. 1996 Dow Corning Corporation. All rights reserved.
Printed in USA
AMPM8088
Product Information
COMPOSITION
Solid lubricants Solvents Binder
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Grey-black s g/ml % months min/C C N
Physical properties
DIN 53211/3 DIN 53217/2 CTM 0242 I Viscosity at 20C (DIN3 cup) Density at 20C Nonvolatile content Storage life 1.07 29 24 5/23 -180 to +450 b =4500 p=12500 s=6800 b = 212 p=146 s=306 b = 178 p = 400 s = 362
Temperature
Curing time Service temperature range ASTM-D2625 Falex load-carrying capacity
ASTM-D2714
ASTM-D2714
LFW-1, rotating F=2860N, n=72 minutes, v=7.9m/minutes no. of revolutions x1000 to =0.1 LFW-1, oscillating F=900N, frequency=89.5osc./minutes no. of oscillations to =0.08
Coefficient of friction
Press-Fit test, = 1. Surface pretreatment: b = blank, p = phosphated, s = sand blasted. * CTM: Corporate Test Method, copies of CTMs are available on request. ASTM: American Society for Testing and Materials. DIN: Deutsche Industrie Norm
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
How to apply
Stir the Anti-Friction Coating thoroughly before applying by spraying or brushing. Recommended dry film thickness: 5 to 20m.
warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
Curing
5 minutes at 23C
Solubility
Thinning can be carried out using MOLYKOTE L 13 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
Product Information
Specialty Lubricants
FEATURES
" Particularly high load-carrying capacity " Good water-resistance and water-washed resistance " Prevents stick-slip and seizure " Good corrosion protection " Excellent protection against galling " Cleanness
c d
MOLYKOTE DX Paste
Light-colored grease-paste with solid lubricants for assembly and long-term lubrication of metallic components APPLICATIONS
" Sliding surfaces and friction contacts exposed to heavy loads, requiring "clean" lubrication, especially at low to medium speeds. " Used successfully, for example, on many friction contacts of electrical and domestic appliances, packaging and office machinery, precision instruments, machinery in foodstuffs and beverages industry, as well as in textile and plastics processing machinery.
COMPOSITION
" " " "
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, density, viscosity ISO 2137 ISO 2811 DIN 51 562 Unworked penetration Density at 20C (68F) Base oil viscosity at 40C (104F)1 Temperature Service temperature ASTM D-1478- Low temperature torque test 80 at -20C (-4F) Initial break-away torque Torque after 20 minutes running time DIN 51 805 Kesternich method - flow pressure at -20C (-4F) Load-carrying capacity, wear protection Four-ball tester (VKA) DIN 51 350 pt.4 Weld load DIN 51 350 pt.5 Wear scar under 800N load Almen-Wieland machine OK load Frictional force Coefficient of friction Press-Fit test = Resistance DIN 51 807 pt.1 Water resistance, static evaluation step DIN 51 808 Oxidation resistance, pressure drop after 100h, 99C (210F) bar 2-90 0.8 0.10, no scatter N N 20000 1560 N mm 4800 0.75 Nm Nm mbar 124x10-3 63x10-3 200 C F -25 to +125 -31 to +257 mm/10 g/ml mm2/s 285-315 1.1 110 Unit Result White
LIMITATIONS
The contact points should be cleaned, wherever possible. Paste should be applied using a suitable brush. It can be delivered by a grease gun or central lubricating system. Excess lubrication does not harm.
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
www.dowcorning.com
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers' tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. 13/09/2002 DC 3633 Dow Corning and MOLYKOTE are registered trademarks of Dow Corning Corporation. 2002 Dow Corning Corporation. All rights reserved.
Product Information
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Parameter Appearance Base oil viscosity at 40C JIS K 2220 Penetration (worked 60 times) NLGI class Service temperature range Density JIS K 2220 Drop point JIS K 2220 Bleed (100C24 hours) JIS K 2220 Evaporation (99C22 hours) JIS K 2220 Oxidation resistance (99C100 hours) JIS K 2220 Copper corrosion (100C 24 hours) ASTM D 2596 Four ball weld load (1500rpm/1minute) ASTM D 2266 Four ball wear scar (1200rpm, 392N, 1 hour) JIS K 2220 Low temperature torque test (-40C) Starting torque Running torque *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials. Standard* Unit mm/s Value White 90 325 1 -45 to 150 0.91 195 5.0 0.4 0.02 1A 3730 0.5 110 51
COMPOSITION
x Poly--olefin x Lithium soap x PTFE, etc.
HOW TO USE
Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONS
This product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling. At high temperatures in excess of 250C, the breakdown of fluorinated polymer can cause the release of a small amount of toxic gas. Ensure adequate ventilation.
PACKAGING
This product is available in 1kg cans (10 cans/case) and 16kg pails.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2006 Dow Corning Corporation. All rights reserved.
Product Information
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Standard* Parameter Appearance Unit Value Translucent White 1050 325 1 -40 to 150 0.84 195 2.5 3.0 0.02 1A 1400 0.71 290 140
COMPOSITION
x Poly--olefin x Lithium soap
JIS K 2220
Base oil viscosity at 40C Penetration (worked 60 times) NLGI class Service temperature range Density JIS K 2220 Drop point JIS K 2220 Bleed (100C24 hours) JIS K 2220 Evaporation (99C22 hours) JIS K 2220 Oxidation resistance (99C100 hours) JIS K 2220 Copper corrosion (100C 24 hours) ASTM D 2596 Four ball weld load (1500rpm/1minute) ASTM D 2266 Four ball wear scar (1200rpm, 392N, 1 hour) JIS K 2220 Low temperature torque test (-40C) Starting torque Running torque *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials.
mm/s
HOW TO USE
Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONS
This product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling.
PACKAGING
This product is available in 1kg cans (10 cans/case) and 16kg pails.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2006 Dow Corning Corporation. All rights reserved.
Product Information
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Parameter Appearance Base oil viscosity at 40C JIS K 2220 Penetration (worked 60 times) NLGI class Service temperature range Density JIS K 2220 Drop point JIS K 2220 Bleed (100C 24 hours) JIS K 2220 Evaporation (99C 22 hours) JIS K 2220 Oxidation resistance (99C 100 hours) JIS K 2220 Copper corrosion (100C 24 hours) ASTM D 2596 Four ball weld load (1500rpm/1minute) ASTM D 2266 Four ball wear scar (1200rpm, 392N, 1 hour) JIS K 2220 Low temperature torque test (-40C) Starting torque Running torque *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials. Standard* Unit mm/s Result White 18 325 0 -60 to 130 0.88 195 5.0 0.3 0.02 1a 3140 0.77 39 20
COMPOSITION
x Polyalfaolefin (PAO) x Lithium soap x PTFE, etc.
HOW TO USE
Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONS
This product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling. At high temperatures in excess of 250C, the breakdown of fluorinated polymer can cause the release of a small amount of toxic gas. Ensure adequate ventilation.
PACKAGING
This product is available in 1kg cans (10 cans/case) and 15kg pails.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2006 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" Contains no lead or nickel " Suitable for long-term lubrication due to low oil evaporation and low tendency towards oxidation " Emergency running properties and reduction of wear by virtue of incorporated solid lubricants " No drop point: consequently no melting or run-out from lubrication point " Good water washout resistance
c d
High performance grease for metal/metal combinations involving slow to medium-fast movements and light to heavy loadings, particularly at high temperatures APPLICATIONS
" Suitable for lubrication points with light to heavy loadings and low to medium speeds, particularly those exposed to continuous high temperatures. " Used successfully on plain and roller bearings of conveyor installations in drying kilns, vulcanizing plants, heating installations, fans and electric motors.
TYPICAL PROPERTIES
COMPOSITION
" " " "
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, density, viscosity DIN 51 818 ISO 2137 ISO 2811 DIN 51 562 NLGI consistency class Worked penetration Density at 20C (68F) Base oil viscosity at 40C (104F)1 Temperature Service temperature C F ISO 2176 Drop point Initial break-away torque Torque after 20 minutes running time Four-ball tester (VKA) DIN 51 350 pt.4 Weld load DIN 51 350 pt.5 Wear scar under 800N load Almen-Wieland machine OK load Frictional force with OK load Corrosion protection DIN 51 802 SKF-Emcor method Degree of corrosion 0-1 N N 20000 3085 N mm 2200 1.3 C/F Nm Nm -30 to +160, +180 for short periods -22 to +320, +356 for short periods None 593x10-3 68x10-3 mm/10 g/ml mm2/s 2 265-295 0.86 260 Unit Result Black
PACKAGING
Clean points of contact. Apply in same way as lubricating greases, using brush, spatula, grease-gun or automatic lubricating device. Suitable for delivery by central lubricating system. Do not mix with other greases.
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
HANDLING PRECAUTIONS
LIMITATIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
www.dowcorning.com
MOLYKOTE FB 180 High Performance Grease 2 Ref. no. 71-0164C-01 25/01/2002 DC 2997
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
Multi purpose mineral oil spray for food processing equipment APPLICATIONS
x
Easy to use Good penetration High corrosion protection High load capability Meets FDA Regulation 21 CRF 178.3570 and USDA H1 Classification for incidental food contact Odorless and tasteless
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Standard Test Color Viscosity Base oil viscosity at 40qC Base oil viscosity at 100qC Viscosity index of base oil Temperature Service temperature range Pour point Unit Value Transparent 96 11 102 -10 to +120 <-10
COMPOSITION
x x x x
mm/s mm/s
C C
Load Carrying Capacity, Wear Protection, Speed Four-Ball Tester (VKA), mm 0.5 Wear Scar under 40 kg Load, 1200 rpm Corrosion Protection Corrosion protection Pass
ASTM D665
ASTM: American Society for Testing and Materials. DIN: Corporate Deutsche Industrie Norm. ISO: International Standardization Organization.
DESCRIPTION
Molykote Food Grade Spray Oil is a multi-purpose mineral oil aerosol. It is suitable for applications in the food, pharmaceutical and similar industries.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
HOW TO USE
Shake well before use. Clean contact surfaces before spraying.
PACKAGING
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. 2003 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
x Modern polyurea thickener x Mineral base oil x Corrosion inhibitor
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Standard Test Unit Value Color Green Base oil type Thickener type Mineral oil Polyurea
Consistency, Viscosity Consistency Worked Penetration Base oil viscosity @ 40C Temperature Service temperature range (est.)
2 265 - 295 125 -30 to +170 -20 to +340 > 260 (> 525)
ASTM D2265
Dropping point Oil Separation/Evaporation Oil separation (24 hrs/ 100C) Evaporation loss (24 hrs/ 100C)
FTMS 791C-321.2
Mass-% Mass-%
2.3 0.1
Load Carrying Capacity, Wear Protection, Speed ASTM D 2596 ASTM D 2266 ASTM D 1743 Four Ball Tester Weld load kg Wear scar under (40 kg; 75qC; 1 hr) mm Dn value (DR x rpm; estimated) Corrosion prevention 315 0.60 400 M 1, 1, 1 Pass
ASTM: American Society for Testing and Materials FTMS: Federal Test Methods
DESCRIPTION
Molykote G-0010 is a mineral oil-based grease thickened by a di-urea system. Molykote G-0010 offers excellent low temperature properties and load-carrying characteristics. Molykote G-0010 provides premium rust prevention and due to its polyurea thickener superior shear and oxidation stability.
PACKAGING
This product is available in 400g cartridges, 16kg pails, and 180kg drums.
HOW TO USE
Apply using conventional grease application methods, i.e., clean brush, grease gun and manual or automated dispensing equipment.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. ~2003 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" Wide service temperature range " Compatible with many plastics and elastomers " Meets FDA Regulation 21 CFR 178.3570 and USDA H1 classifications for incidental food contact " Fully synthetic base oil " White color " Available in NLGI consistency classes 1 and 2
c d
MOLYKOTE G-4500/G-4501 Multi-purpose synthetic grease
White food grade synthetic greases APPLICATION
" General purpose light consistency white synthetic grease can be used in rolling element and plain bearings, pivot pins, cams, guides, ways, drive screws, gears, splines and other machine elements.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. ASTM* Property Consistency, Viscosity, Specific Gravity DIN 51 818 ASTM D217 ASTM D445 ASTM D445 ISO 2811 NLGI consistency class Penetration at 25C (77F) (W/60) Base oil viscosity at 40C (104F) Base oil viscosity at 100C (212F) Specific gravity at 25C (77F) Temperature Temperature range (approximate) ASTM D2265 Dropping point FD 791-32/2 FD 791-32/2 Oil bleed, 24 hours, 100C (212F) C F C F wt% Nm mm N kg Oil evaporation, 24 hours, 100C (212F) wt% -40 to 150 -40 to 150 -40 to 302 -40 to 302 >270 >518 3.1 0.4 0.9 0.5 >3,100 >18 325,000 >260 >500 4.7 0.5 0.7 0.5 >3,100 >18 325,000 cSt cSt g/ml 2 mm/10 265-295 100 14.4 0.84 1 310-340 100 14.4 0.83 Unit Value G-4500 G-4501
BENEFITS
" Formulated to provide higher load carrying capacity, greater wear resistance and longer service life compared to conventional petroleum-based lubricants " Provides good compatibility with most industrial and engineering substrates including many plastic and rubber materials " Excellent low temperature torque " Low consistency formulation of G-4501 allows use in automatic dispensing systems
COMPOSITION
" PAO base oil " Aluminum complex thickener " Fortified with polytetrafluoroethylene (PTFE)
ASTM D4693 Low-temperature torque at -40C (-40F) ASTM D2266 Four-ball wear, 40kg, 1200rpm ASTM D2596 Four-ball EP, weld load, minimum ASTM D2509 TIMKEN test, OK load Dn, bearing ID (mm)x(rpm), estimated * ASTM: American Society for Testing and Materials. ISO: International Standardisation Organisation. DIN: Deutsche Industrie Norm.
DESCRIPTION
MOLYKOTE G-4500/G-4501 Multi-purpose synthetic greases are high-performance greases that combine the benefits of wide operating temperature range and broad compatibility with varied materials. Both are thickened with an aluminum complex and contain white solid lubricants. They can be used to lubricate bearings, gears, chains and sliding mechanisms in food processing machinery.
When stored at or below 40C (104F) in the original unopened containers, these products have a usable life of 60 months from the date of production.
PACKAGING
HOW TO USE
These products are available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning Sales Office or Dow Corning Distributor.
Apply using conventional grease application methods, i.e., clean brush, grease gun and manual or automated dispensing equipment.
LIMITATIONS
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers' tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
www.dowcorning.com www.molykote.com
MOLYKOTE G-4500/G-4501 Multi-purpose synthetic grease 2 Ref. no. 80-3150-01 02/10/2002 DC 4422
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. Dow Corning and MOLYKOTE are registered trademarks of Dow Corning Corporation. 2002 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" " " " " " " "
c d
Low friction coefficient High pressure-absorption capacity Prevents seizure and scoring Suppresses stick-slip Reduces formation of fretting corrosion Facilitates disassembly Good coverage Provides emergency running performance
Solid lubricating paste with particularly low friction coefficient for assembly and running-in of metallic components APPLICATIONS
" Suitable for the press-fit production of all types of machine elements, as a running-in lubricant for new machines and gears, as permanent lubrication of machine elements which are submitted to slight or intermittent movement only, as well as for drilling, sawing and thread-cutting. " Used to lubricate threaded spindles, splined shafts, tooth gearing, worm gearing, moving screws, fittings, pumps, guides on machine tools, as well as for fitting ball and roller bearings, pulleys, wheel flanges and bolts.
COMPOSITION
" Mineral oil " Solid lubricants
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, density Unworked penetration Density at 20C (68F) Temperature Service temperature range Load-carrying capacity DIN 51 350 pt.4 Four-ball tester Weld load Almen Wieland machine OK load Coefficient of friction In bolted connection M12, 8.8 with blackened surface (Erichsen tester), - thread - head Press-Fit test, Resistance DIN 51 807 pt.1 Water resistance, static, evaluation 1-90 * DIN: Deutsche Industrie Norm 0.10 0.06 0.05, no chatter N N 5300 >20000 C F -35 to +450 -31 to +842 mm/10 g/ml 255-275 1.40 Unit Result Black
Clean the sliding surfaces or contact areas, then apply paste with a brush, cloth, synthetic sponge or window leather. Do not use in excess as with
grease lubrication. Vigorous rubbing into metal surface will improve adhesion. Do not mix with greases or oils.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
www.dowcorning.com
MOLYKOTE G-Rapid Plus Solid lubricant paste 2 Ref. no. 71-0084C-01 20/02/2002 DC 2931
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
APPLICATION
Spur gear systems, load chains, settling shims, springs, shaft-hub connection, encapsulated joints, gears, linear motion guides.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Beige 1 310-340 1.12 115 -25 to +120 155
COMPOSITION
Mineral oil Lithium soap Adhesion improver Solid lubricants
Temperature
ISO 2176 Service temperature Drop point
Resistance
DIN 51 808 Oxidation resistance, pressure drop 100h, bar 99C
Corrosion protection
DIN 51 802 Emcor method 0-1
Coefficient of friction
Steel ball against plastic surface (POM) ball = 12.7mm, load = 6.3N, v = 10mm/s, 24h 0.08
Environment and Regulatory Affairs specialists available in each area. For further information, please consult your local Dow Corning representative.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in 1kg cans, 400g cartridges and 5kg drums.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Product Information
COMPOSITION
Silicone oil Inorganic thickener
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Physical nature Penetration, unworked Penetration, worked 60, max. Bleed, 24 hours; 200C Evaporation, 24 hours; 200C Melting point Unit White to grey, translucent Stiff compound 175 to 210 260 <0.5 <2.0 None
mm/10 mm/10 % % C
High-Vacuum Grease should always be tested before the material is adopted for regular use.
HANDLING PRECAUTIONS
In case of eye contact, flush eyes with water. PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL
Chemical resistance
DOW CORNING High-Vacuum Grease is unaffected by most vegetable and minerals oils, many organic compounds, and most common gases. It is also resistant to most aqueous solutions of inorganic salts and to dilute acids and alkalies. The suitability of DOW CORNING
warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Product Information
COMPOSITION
x Perfluoro polyether x Fluorinated polymer x Corrosion inhibitor
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Parameter Appearance JIS K 2220 Penetration (worked 60 times) Service temperature range NLGI class MIL-S-8660 MIL-S-8660 MIL-S-8660 ASTM D2596 ASTM D2266 JIS K 2220 Density Bleed (200C 24 hours) Evaporation (200C 24 hours) Evaporation (200C 1000 hours) Four ball weld load (1500rpm/1minute) Four ball wear scar (1200rpm, 392N, 1 hour) Low temperature torque test (-20C) Starting torque Running torque JIS K 2220 Low temperature torque test (-40C) Starting torque Running torque DIN 51 802 Emcor corrosion test Base oil vapor pressure 20C
* JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials. MIL: Military Specification and Standards. DIN: Deutsches Industrie Norm.
Unit
Value White
280 -20 to 250 2 2.0 5.0 1.0 3.0 >4900 1.3 54 28 Not measurable Not measurable 0 to 1 2x10-6
Pa
HOW TO USE
Clean points of contact. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
PACKAGING
This product is available in 100g plastic cans and 750g collapsible cartridges.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HANDLING PRECAUTIONS
Although MOLYKOTE HP-870 Grease is extremely chemically stable, it gradually begins to break down at temperatures in excess of 250C releasing a toxic gasses; be sure that this product is only used in an
environment with adequate ventilation.
Do not smoke cigarettes if they have been in contact with this product. Be sure to wash your hands thoroughly after working with this product. Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels
for safe use, physical and health hazard
Website Guide
For more information on our company and how to contact us, visit our website, www.molykote.com We help you invent the future."
21/02/2007 DC 4422
We help you invent the future. is a trademark of Dow Corning Corporation. MOLYKOTE and DOW CORNING are registered trademarks of Dow Corning Corporation. 2002, 2003 Dow Corning Corporation. All rights reserved.
Product Information
" Compatible with most rubber and plastics " Excellent stability at high temperatures " Superior resistance to chemicals and solvents " Minimal deterioration due to oxidation, appropriate for long-term lubrication " Low vapor pressure (base oil)
COMPOSITION
" Perfluoro polyether " Fluorinated polymer
" MOLYKOTE HP-300 Grease can be used broadly under harsh conditions such as low or high temperatures, corrosive, solvent, liquefied natural gasses, high vacuum, etc. " Clean room equipment and semiconductor manufacturing equipment where the volatization of the lubricating material is undesirable.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* JIS K 2220 Parameter Appearance Penetration (worked 60 times) NLGI class Service temperature range Density MIL-S-8660 MIL-S-8660 MIL-S-8660 ASTM D2596 ASTM D2266 JIS K 2220 Bleed (200C 24 hours) Evaporation (200C 24 hours) Evaporation (200C 1000 hours) Four ball weld load (1500rpm/1minute) Four ball wear scar (1200rpm, 392N, 1 hour) Low temperature torque test (-20C) Starting torque Running torque JIS K 2220 Low temperature torque test (-40C) Starting torque Running torque Base oil vapor pressure 20C
* JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials. MIL: Military Specification and Standards.
Value White 280 2 -65 to 250 2.0 8.0 0.2 1.0 3330 1.1 4.1 1.8 11 3.6 4x10-10
HOW TO USE
Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONS
Although MOLYKOTE HP-300 Grease is highly chemically stable, at temperatures in excess of 250C the material will gradually decompose and release toxic gasses; be sure to have adequate ventilation if you expect the material to decompose. Do not smoke cigarettes that are contaminated with this product. Be sure to wash hands thoroughly after use. Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.molykote.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers' tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
When stored, unopened in a cool, dark place this product, has a usable life of 36 months from the date of production.
PACKAGING
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Website Guide
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
For more information on our company and how to contact us, visit our website, www.molykote.com We help you invent the future."
22/12/2003 16608
We help you invent the future. is a trademark of Dow Corning Corporation. MOLYKOTE and DOW CORNING are registered trademarks of Dow Corning Corporation. 2002, 2003 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" Can be used over a wide range of temperature (-30C/-22F to 1100C/2012F) " Enables non-destructive dismantling, even after long use at high temperatures " High load-carrying capacity " Due to stated coefficient of friction, defined pre-stressing forces for bolted joints can be achieved " Good corrosion protection " Good electrical conductivity
c d
" For metal/metal combinations that are subjected to high temperatures and frictional contacts which, typically for bolted joints, are free from lead or nickel. " Suitable for lubrication points with low speeds, subjected to high temperatures and corrosive effects, and also require a low and constant coefficient of friction. As a contact lubricant for electrically conducting components. " Used successfully for stud bolts of gas and steam turbines, stud bolts of turbochargers of diesel engines, flanged connections in chemical and petrochemical plants.
TYPICAL PROPERTIES
COMPOSITION
" " " "
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Penetration, density, viscosity ISO 2137 ISO 2811 Unworked penetration Density at 20C (68F) Temperature Service temperature1 ISO 2176 Drop point C F C F Load-carrying capacity, wear protection, service life Four-ball tester DIN 51 350 pt.4 Weld load DIN 51 350 pt.5 Wear scar under 400N load DIN 51 350 pt.5 Wear scar under 800N load Almen-Wieland machine OK load Frictional force N N 20000 1700 N mm mm 4800 0.6 1.1 -30 to 1100 -22 to 2012 None None mm/10 g/ml 250-280 1.4 Unit Result Copper
Unit
Result
0.14 0.09
Initial break-away torque Nm 120 1. Temperature limit of solid lubricants 2. Coefficient of friction in bolted connection, M12, 8.8, on blackened surface. 3. M 12, with starting torque Ma = 56Nm and heat treatment at 540C/1004F, 21h, bolt material: 21 Cr MoV 57 mat no. 1.7709. * ISO: International Standardisation Organisation. DIN: Deutsche Industrie Norm.
PACKAGING
If possible, clean the thread and used bolts with a wire brush. Spread an adequate amount of the paste on the contact areas in order to obtain a good seal. An excess is not harmful. In order not to alter the properties, the paste must not be mixed with greases or oils. Use spray can in order to apply the product more quickly and cleanly to larger areas or poorly accessible places.
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
www.dowcorning.com
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. 20/02/2002 DC 2905 MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
Chain Oils
FEATURES
Lower overall maintenance costs Wider temperature range Longer oil-drain intervals Reduced lubricant consumption Extended equipment lifetime Reduced energy consumption Long life reduces lubricant usage, maintenance cost
COMPOSITION
Hydroprocessed mineral oil (MO), polyalphaolefin (PAO) and polyalphaolefin/mineral oil (PAO/MO) based lubricants.
Molykote gearbox and chain oils help prevent wear and process interruptions in power transmission systems and components. Compared to conventional oils, they also offer greater resistance to oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils maximize fill intervals and maintain viscosity characteristics at wide temperature ranges.
DESCRIPTION
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
HOW TO USE
Follow equipment manufacturers recommendations for maintenance procedures and oil specifications. To ensure the longest possible life span for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of antioxidants in lubricating fluids. Moreover, sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information.
Molykote gearbox and chain oils have a shelf life of 60 months from date of manufacture. Refer to product packaging for use-by date.
PACKAGING
Molykote gearbox and chain lubricants are available in 18.9- and 208.2-L (5- and 55-gal) containers.
LIMITATIONS
These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
Molykote lubricating fluids are kosher approved and conform to USDA listing requirements under H-1 or H-2 designations (see Typical Properties table). An H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. An H-2 designation indicates the lubricated part cannot have contact with food.
SHIPPING LIMITATIONS
None.
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Viscosity @ 100C, cSt Viscosity @ 100F, cSt Viscosity @ 210F, cSt Viscosity @ 40C, cSt Viscosity Index Flash Point, F Pour Point, C Additive Package R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW T/PPD R&O/AW T/PPD R&O/AW Density @ 20C, g/mL Density @ 20C, lb/gal
Fire Point, F
AGMA2#
USDA
Molykote brand Product Gearbox Oils1 L-0115 Gear Oil ISO 150 L-0115FG Gear Oil ISO 150 L-0122 Gear Oil ISO 220 L-0122FG Gear Oil ISO 220 L-0132 Gear Oil ISO 320 L-0146 Gear Oil ISO 460 L-0146FG Gear Oil ISO 460 L-1115 Synthetic Blend Gear Oil - ISO 150 L-1115FG Synthetic Blend Gear Oil - ISO 150 L-1122 Synthetic Blend Gear Oil - ISO 220 L-1122FG Synthetic Blend Gear Oil - ISO 220 L-1132 Synthetic Gear Oil ISO 320 L-1146 Synthetic Gear Oil ISO 460 L-1146FG Synthetic Gear Oil ISO 460 L-01681 Gear Oil L-11681 Synthetic Gear Oil Chain Oils1 L-0460FG Blend Chain Oil (ISO 68) L-1468FG Synthetic Freezer Chain Oil (ISO 68) L-1428 High Temperature
1 2
H-23 H-14 H-2 H-1 H-2 H-2 H-1 H-2 H-1 H-2 H-1 H-2 H-2 H-1 H-2 H-2
149.4 150 223 219.1 312 456.6 441.1 145 134.7 211.6 197.8 342.5 455.2 380.2 659 674
14.8 15.4 20.4 20 31 32.8 33.1 15.6 17.4 19.5 24 30.8 45.1 39.2 42 48
169.3 170.1 265.6 249.7 349.5 507.5 507.5 162 151.3 251.8 220.8 388.6 512.4 428.3 764 772.1
15.2 15.9 21 20.7 31.6 33.8 34.2 16 17.8 20.2 24.7 31.8 46.5 40.4 43 51.2
100 100 101 101 134 107 107 100 122 120 142 126 154 147 105 128
500 500 510 490 460 575 575 515 435 500 440 540 545 545 485 505
530 530 550 510 515 620 620 530 470 510 490 590 595 595 555 580
-18 -18 -18 -21 -18 -18 -18 -18 -39 -21 -33 -39 -36 -36 -21 -27
4 4 5 5 6 7 7 4 4 5 5 6 7 7 8 8
0.86 0.86 0.86 0.86 0.87 0.87 0.88 0.87 0.85 0.87 0.85 0.85 0.852 0.852 0.88 0.85
7.16 7.16 7.16 7.16 7.24 7.24 7.32 7.24 7.07 7.24 7.07 7.07 7.09 7.09 7.32 7.07
90-140 PAO/PB 140 140 140 140 PAO/PB PAO MO/PB PAO/PB
66 65.8 285
8.3 9.8 24
8.6 10 26
30 30
MO PAO POE/PB
Typical values; not for use in preparing specifications. AGMA is an acronym for American Gear Manufacturers Association. 3 The H-2 designation indicates the lubricated part cannot have contact with food. 4 The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. We help you invent the future. www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. 2003 Dow Corning Corporation. All rights reserved.
Base Oil
SAE#
Product Information
FEATURES
Lower overall maintenance costs Wider temperature range Longer oil-drain intervals Reduced lubricant consumption Extended equipment lifetime Reduced energy consumption Long life reduces lubricant usage, maintenance cost
DESCRIPTION
Molykote multi-purpose oils provide protection and lubrication for a wide range of moving components in industrial systems. Depending on the application, your Dow Corning representative can help you select the right oil from a range of viscosities, additive packages.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
COMPOSITION
Hydrocracked Mineral oil (MO) based lubricants
HOW TO USE
Follow equipment manufacturers recommendations for maintenance procedures and oil specifications. To ensure the longest possible life for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of antioxidants in lubricating fluids. Sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information.
PACKAGING
Molykote multi-purpose oils are available in 18.9- and 208.2-L (5- and 55-gal) containers.
SHIPPING LIMITATIONS
None.
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Viscosity @ 100C, cSt Viscosity @ 100F, cSt Viscosity @ 210F, cSt Viscosity @ 40C, cSt USDA/NSF status Additive Package R&O/AW RO R&O/AW R&O/AW Density @ 20C, g/mL Density @ 20C, lb/gal 7.13 7.22 7.29 7.21 Viscosity Index Flash Point, F
Pour Point, F
Fire Point, F
ISO Grade
Molykote brand Product Multi-Purpose Oils1 L-0532FG Multi Purpose Light Oil2 L-0568 Multi Purpose Oil
2
32 68 100 100
MO MO MO MO
Typical values; not for use in preparing specifications. The oil date is also displayed in the Molykote Hydraulic Oils Data Sheet.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. We help you invent the future. www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. 2003 Dow Corning Corporation. All rights reserved.
Base Oil
Product Information
Chain Oils
FEATURES
Lower overall maintenance costs Wider temperature range Longer oil-drain intervals Reduced lubricant consumption Extended equipment lifetime Reduced energy consumption Long life reduces lubricant usage, maintenance cost
COMPOSITION
Hydroprocessed mineral oil (MO), polyalphaolefin (PAO) and polyalphaolefin/mineral oil (PAO/MO) based lubricants.
Molykote gearbox and chain oils help prevent wear and process interruptions in power transmission systems and components. Compared to conventional oils, they also offer greater resistance to oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils maximize fill intervals and maintain viscosity characteristics at wide temperature ranges.
DESCRIPTION
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
HOW TO USE
Follow equipment manufacturers recommendations for maintenance procedures and oil specifications. To ensure the longest possible life span for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of antioxidants in lubricating fluids. Moreover, sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information.
Molykote gearbox and chain oils have a shelf life of 60 months from date of manufacture. Refer to product packaging for use-by date.
PACKAGING
Molykote gearbox and chain lubricants are available in 18.9- and 208.2-L (5- and 55-gal) containers.
LIMITATIONS
These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
Molykote lubricating fluids are kosher approved and conform to USDA listing requirements under H-1 or H-2 designations (see Typical Properties table). An H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. An H-2 designation indicates the lubricated part cannot have contact with food.
SHIPPING LIMITATIONS
None.
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Viscosity @ 100C, cSt Viscosity @ 100F, cSt Viscosity @ 210F, cSt Viscosity @ 40C, cSt Viscosity Index Flash Point, F Pour Point, C Additive Package R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW T/PPD R&O/AW T/PPD R&O/AW Density @ 20C, g/mL Density @ 20C, lb/gal
Fire Point, F
AGMA2#
USDA
Molykote brand Product Gearbox Oils1 L-0115 Gear Oil ISO 150 L-0115FG Gear Oil ISO 150 L-0122 Gear Oil ISO 220 L-0122FG Gear Oil ISO 220 L-0132 Gear Oil ISO 320 L-0146 Gear Oil ISO 460 L-0146FG Gear Oil ISO 460 L-1115 Synthetic Blend Gear Oil - ISO 150 L-1115FG Synthetic Blend Gear Oil - ISO 150 L-1122 Synthetic Blend Gear Oil - ISO 220 L-1122FG Synthetic Blend Gear Oil - ISO 220 L-1132 Synthetic Gear Oil ISO 320 L-1146 Synthetic Gear Oil ISO 460 L-1146FG Synthetic Gear Oil ISO 460 L-01681 Gear Oil L-11681 Synthetic Gear Oil Chain Oils1 L-0460FG Blend Chain Oil (ISO 68) L-1468FG Synthetic Freezer Chain Oil (ISO 68) L-1428 High Temperature
1 2
H-23 H-14 H-2 H-1 H-2 H-2 H-1 H-2 H-1 H-2 H-1 H-2 H-2 H-1 H-2 H-2
149.4 150 223 219.1 312 456.6 441.1 145 134.7 211.6 197.8 342.5 455.2 380.2 659 674
14.8 15.4 20.4 20 31 32.8 33.1 15.6 17.4 19.5 24 30.8 45.1 39.2 42 48
169.3 170.1 265.6 249.7 349.5 507.5 507.5 162 151.3 251.8 220.8 388.6 512.4 428.3 764 772.1
15.2 15.9 21 20.7 31.6 33.8 34.2 16 17.8 20.2 24.7 31.8 46.5 40.4 43 51.2
100 100 101 101 134 107 107 100 122 120 142 126 154 147 105 128
500 500 510 490 460 575 575 515 435 500 440 540 545 545 485 505
530 530 550 510 515 620 620 530 470 510 490 590 595 595 555 580
-18 -18 -18 -21 -18 -18 -18 -18 -39 -21 -33 -39 -36 -36 -21 -27
4 4 5 5 6 7 7 4 4 5 5 6 7 7 8 8
0.86 0.86 0.86 0.86 0.87 0.87 0.88 0.87 0.85 0.87 0.85 0.85 0.852 0.852 0.88 0.85
7.16 7.16 7.16 7.16 7.24 7.24 7.32 7.24 7.07 7.24 7.07 7.07 7.09 7.09 7.32 7.07
90-140 PAO/PB 140 140 140 140 PAO/PB PAO MO/PB PAO/PB
66 65.8 285
8.3 9.8 24
8.6 10 26
30 30
MO PAO POE/PB
Typical values; not for use in preparing specifications. AGMA is an acronym for American Gear Manufacturers Association. 3 The H-2 designation indicates the lubricated part cannot have contact with food. 4 The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. We help you invent the future. www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. 2003 Dow Corning Corporation. All rights reserved.
Base Oil
SAE#
Product Information
Chain Oils
FEATURES
Lower overall maintenance costs Wider temperature range Longer oil-drain intervals Reduced lubricant consumption Extended equipment lifetime Reduced energy consumption Long life reduces lubricant usage, maintenance cost
COMPOSITION
Hydroprocessed mineral oil (MO), polyalphaolefin (PAO) and polyalphaolefin/mineral oil (PAO/MO) based lubricants.
Molykote gearbox and chain oils help prevent wear and process interruptions in power transmission systems and components. Compared to conventional oils, they also offer greater resistance to oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils maximize fill intervals and maintain viscosity characteristics at wide temperature ranges.
DESCRIPTION
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
HOW TO USE
Follow equipment manufacturers recommendations for maintenance procedures and oil specifications. To ensure the longest possible life span for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of antioxidants in lubricating fluids. Moreover, sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information.
Molykote gearbox and chain oils have a shelf life of 60 months from date of manufacture. Refer to product packaging for use-by date.
PACKAGING
Molykote gearbox and chain lubricants are available in 18.9- and 208.2-L (5- and 55-gal) containers.
LIMITATIONS
These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
Molykote lubricating fluids are kosher approved and conform to USDA listing requirements under H-1 or H-2 designations (see Typical Properties table). An H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. An H-2 designation indicates the lubricated part cannot have contact with food.
SHIPPING LIMITATIONS
None.
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Viscosity @ 100C, cSt Viscosity @ 100F, cSt Viscosity @ 210F, cSt Viscosity @ 40C, cSt Viscosity Index Flash Point, F Pour Point, C Additive Package R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW T/PPD R&O/AW T/PPD R&O/AW Density @ 20C, g/mL Density @ 20C, lb/gal
Fire Point, F
AGMA2#
USDA
Molykote brand Product Gearbox Oils1 L-0115 Gear Oil ISO 150 L-0115FG Gear Oil ISO 150 L-0122 Gear Oil ISO 220 L-0122FG Gear Oil ISO 220 L-0132 Gear Oil ISO 320 L-0146 Gear Oil ISO 460 L-0146FG Gear Oil ISO 460 L-1115 Synthetic Blend Gear Oil - ISO 150 L-1115FG Synthetic Blend Gear Oil - ISO 150 L-1122 Synthetic Blend Gear Oil - ISO 220 L-1122FG Synthetic Blend Gear Oil - ISO 220 L-1132 Synthetic Gear Oil ISO 320 L-1146 Synthetic Gear Oil ISO 460 L-1146FG Synthetic Gear Oil ISO 460 L-01681 Gear Oil L-11681 Synthetic Gear Oil Chain Oils1 L-0460FG Blend Chain Oil (ISO 68) L-1468FG Synthetic Freezer Chain Oil (ISO 68) L-1428 High Temperature
1 2
H-23 H-14 H-2 H-1 H-2 H-2 H-1 H-2 H-1 H-2 H-1 H-2 H-2 H-1 H-2 H-2
149.4 150 223 219.1 312 456.6 441.1 145 134.7 211.6 197.8 342.5 455.2 380.2 659 674
14.8 15.4 20.4 20 31 32.8 33.1 15.6 17.4 19.5 24 30.8 45.1 39.2 42 48
169.3 170.1 265.6 249.7 349.5 507.5 507.5 162 151.3 251.8 220.8 388.6 512.4 428.3 764 772.1
15.2 15.9 21 20.7 31.6 33.8 34.2 16 17.8 20.2 24.7 31.8 46.5 40.4 43 51.2
100 100 101 101 134 107 107 100 122 120 142 126 154 147 105 128
500 500 510 490 460 575 575 515 435 500 440 540 545 545 485 505
530 530 550 510 515 620 620 530 470 510 490 590 595 595 555 580
-18 -18 -18 -21 -18 -18 -18 -18 -39 -21 -33 -39 -36 -36 -21 -27
4 4 5 5 6 7 7 4 4 5 5 6 7 7 8 8
0.86 0.86 0.86 0.86 0.87 0.87 0.88 0.87 0.85 0.87 0.85 0.85 0.852 0.852 0.88 0.85
7.16 7.16 7.16 7.16 7.24 7.24 7.32 7.24 7.07 7.24 7.07 7.07 7.09 7.09 7.32 7.07
90-140 PAO/PB 140 140 140 140 PAO/PB PAO MO/PB PAO/PB
66 65.8 285
8.3 9.8 24
8.6 10 26
30 30
MO PAO POE/PB
Typical values; not for use in preparing specifications. AGMA is an acronym for American Gear Manufacturers Association. 3 The H-2 designation indicates the lubricated part cannot have contact with food. 4 The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. We help you invent the future. www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. 2003 Dow Corning Corporation. All rights reserved.
Base Oil
SAE#
Product Information
Chain Oils
FEATURES
Lower overall maintenance costs Wider temperature range Longer oil-drain intervals Reduced lubricant consumption Extended equipment lifetime Reduced energy consumption Long life reduces lubricant usage, maintenance cost
COMPOSITION
Hydroprocessed mineral oil (MO), polyalphaolefin (PAO) and polyalphaolefin/mineral oil (PAO/MO) based lubricants.
Molykote gearbox and chain oils help prevent wear and process interruptions in power transmission systems and components. Compared to conventional oils, they also offer greater resistance to oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils maximize fill intervals and maintain viscosity characteristics at wide temperature ranges.
DESCRIPTION
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
HOW TO USE
Follow equipment manufacturers recommendations for maintenance procedures and oil specifications. To ensure the longest possible life span for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of antioxidants in lubricating fluids. Moreover, sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information.
Molykote gearbox and chain oils have a shelf life of 60 months from date of manufacture. Refer to product packaging for use-by date.
PACKAGING
Molykote gearbox and chain lubricants are available in 18.9- and 208.2-L (5- and 55-gal) containers.
LIMITATIONS
These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
Molykote lubricating fluids are kosher approved and conform to USDA listing requirements under H-1 or H-2 designations (see Typical Properties table). An H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. An H-2 designation indicates the lubricated part cannot have contact with food.
SHIPPING LIMITATIONS
None.
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Viscosity @ 100C, cSt Viscosity @ 100F, cSt Viscosity @ 210F, cSt Viscosity @ 40C, cSt Viscosity Index Flash Point, F Pour Point, C Additive Package R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW T/PPD R&O/AW T/PPD R&O/AW Density @ 20C, g/mL Density @ 20C, lb/gal
Fire Point, F
AGMA2#
USDA
Molykote brand Product Gearbox Oils1 L-0115 Gear Oil ISO 150 L-0115FG Gear Oil ISO 150 L-0122 Gear Oil ISO 220 L-0122FG Gear Oil ISO 220 L-0132 Gear Oil ISO 320 L-0146 Gear Oil ISO 460 L-0146FG Gear Oil ISO 460 L-1115 Synthetic Blend Gear Oil - ISO 150 L-1115FG Synthetic Blend Gear Oil - ISO 150 L-1122 Synthetic Blend Gear Oil - ISO 220 L-1122FG Synthetic Blend Gear Oil - ISO 220 L-1132 Synthetic Gear Oil ISO 320 L-1146 Synthetic Gear Oil ISO 460 L-1146FG Synthetic Gear Oil ISO 460 L-01681 Gear Oil L-11681 Synthetic Gear Oil Chain Oils1 L-0460FG Blend Chain Oil (ISO 68) L-1468FG Synthetic Freezer Chain Oil (ISO 68) L-1428 High Temperature
1 2
H-23 H-14 H-2 H-1 H-2 H-2 H-1 H-2 H-1 H-2 H-1 H-2 H-2 H-1 H-2 H-2
149.4 150 223 219.1 312 456.6 441.1 145 134.7 211.6 197.8 342.5 455.2 380.2 659 674
14.8 15.4 20.4 20 31 32.8 33.1 15.6 17.4 19.5 24 30.8 45.1 39.2 42 48
169.3 170.1 265.6 249.7 349.5 507.5 507.5 162 151.3 251.8 220.8 388.6 512.4 428.3 764 772.1
15.2 15.9 21 20.7 31.6 33.8 34.2 16 17.8 20.2 24.7 31.8 46.5 40.4 43 51.2
100 100 101 101 134 107 107 100 122 120 142 126 154 147 105 128
500 500 510 490 460 575 575 515 435 500 440 540 545 545 485 505
530 530 550 510 515 620 620 530 470 510 490 590 595 595 555 580
-18 -18 -18 -21 -18 -18 -18 -18 -39 -21 -33 -39 -36 -36 -21 -27
4 4 5 5 6 7 7 4 4 5 5 6 7 7 8 8
0.86 0.86 0.86 0.86 0.87 0.87 0.88 0.87 0.85 0.87 0.85 0.85 0.852 0.852 0.88 0.85
7.16 7.16 7.16 7.16 7.24 7.24 7.32 7.24 7.07 7.24 7.07 7.07 7.09 7.09 7.32 7.07
90-140 PAO/PB 140 140 140 140 PAO/PB PAO MO/PB PAO/PB
66 65.8 285
8.3 9.8 24
8.6 10 26
30 30
MO PAO POE/PB
Typical values; not for use in preparing specifications. AGMA is an acronym for American Gear Manufacturers Association. 3 The H-2 designation indicates the lubricated part cannot have contact with food. 4 The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. We help you invent the future. www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. 2003 Dow Corning Corporation. All rights reserved.
Base Oil
SAE#
Product Information
Chain Oils
FEATURES
Lower overall maintenance costs Wider temperature range Longer oil-drain intervals Reduced lubricant consumption Extended equipment lifetime Reduced energy consumption Long life reduces lubricant usage, maintenance cost
COMPOSITION
Hydroprocessed mineral oil (MO), polyalphaolefin (PAO) and polyalphaolefin/mineral oil (PAO/MO) based lubricants.
Molykote gearbox and chain oils help prevent wear and process interruptions in power transmission systems and components. Compared to conventional oils, they also offer greater resistance to oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils maximize fill intervals and maintain viscosity characteristics at wide temperature ranges.
DESCRIPTION
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
HOW TO USE
Follow equipment manufacturers recommendations for maintenance procedures and oil specifications. To ensure the longest possible life span for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of antioxidants in lubricating fluids. Moreover, sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information.
Molykote gearbox and chain oils have a shelf life of 60 months from date of manufacture. Refer to product packaging for use-by date.
PACKAGING
Molykote gearbox and chain lubricants are available in 18.9- and 208.2-L (5- and 55-gal) containers.
LIMITATIONS
These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
Molykote lubricating fluids are kosher approved and conform to USDA listing requirements under H-1 or H-2 designations (see Typical Properties table). An H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. An H-2 designation indicates the lubricated part cannot have contact with food.
SHIPPING LIMITATIONS
None.
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Viscosity @ 100C, cSt Viscosity @ 100F, cSt Viscosity @ 210F, cSt Viscosity @ 40C, cSt Viscosity Index Flash Point, F Pour Point, C Additive Package R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW T/PPD R&O/AW T/PPD R&O/AW Density @ 20C, g/mL Density @ 20C, lb/gal
Fire Point, F
AGMA2#
USDA
Molykote brand Product Gearbox Oils1 L-0115 Gear Oil ISO 150 L-0115FG Gear Oil ISO 150 L-0122 Gear Oil ISO 220 L-0122FG Gear Oil ISO 220 L-0132 Gear Oil ISO 320 L-0146 Gear Oil ISO 460 L-0146FG Gear Oil ISO 460 L-1115 Synthetic Blend Gear Oil - ISO 150 L-1115FG Synthetic Blend Gear Oil - ISO 150 L-1122 Synthetic Blend Gear Oil - ISO 220 L-1122FG Synthetic Blend Gear Oil - ISO 220 L-1132 Synthetic Gear Oil ISO 320 L-1146 Synthetic Gear Oil ISO 460 L-1146FG Synthetic Gear Oil ISO 460 L-01681 Gear Oil L-11681 Synthetic Gear Oil Chain Oils1 L-0460FG Blend Chain Oil (ISO 68) L-1468FG Synthetic Freezer Chain Oil (ISO 68) L-1428 High Temperature
1 2
H-23 H-14 H-2 H-1 H-2 H-2 H-1 H-2 H-1 H-2 H-1 H-2 H-2 H-1 H-2 H-2
149.4 150 223 219.1 312 456.6 441.1 145 134.7 211.6 197.8 342.5 455.2 380.2 659 674
14.8 15.4 20.4 20 31 32.8 33.1 15.6 17.4 19.5 24 30.8 45.1 39.2 42 48
169.3 170.1 265.6 249.7 349.5 507.5 507.5 162 151.3 251.8 220.8 388.6 512.4 428.3 764 772.1
15.2 15.9 21 20.7 31.6 33.8 34.2 16 17.8 20.2 24.7 31.8 46.5 40.4 43 51.2
100 100 101 101 134 107 107 100 122 120 142 126 154 147 105 128
500 500 510 490 460 575 575 515 435 500 440 540 545 545 485 505
530 530 550 510 515 620 620 530 470 510 490 590 595 595 555 580
-18 -18 -18 -21 -18 -18 -18 -18 -39 -21 -33 -39 -36 -36 -21 -27
4 4 5 5 6 7 7 4 4 5 5 6 7 7 8 8
0.86 0.86 0.86 0.86 0.87 0.87 0.88 0.87 0.85 0.87 0.85 0.85 0.852 0.852 0.88 0.85
7.16 7.16 7.16 7.16 7.24 7.24 7.32 7.24 7.07 7.24 7.07 7.07 7.09 7.09 7.32 7.07
90-140 PAO/PB 140 140 140 140 PAO/PB PAO MO/PB PAO/PB
66 65.8 285
8.3 9.8 24
8.6 10 26
30 30
MO PAO POE/PB
Typical values; not for use in preparing specifications. AGMA is an acronym for American Gear Manufacturers Association. 3 The H-2 designation indicates the lubricated part cannot have contact with food. 4 The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. We help you invent the future. www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. 2003 Dow Corning Corporation. All rights reserved.
Base Oil
SAE#
Product Information
Chain Oils
FEATURES
Lower overall maintenance costs Wider temperature range Longer oil-drain intervals Reduced lubricant consumption Extended equipment lifetime Reduced energy consumption Long life reduces lubricant usage, maintenance cost
COMPOSITION
Hydroprocessed mineral oil (MO), polyalphaolefin (PAO) and polyalphaolefin/mineral oil (PAO/MO) based lubricants.
Molykote gearbox and chain oils help prevent wear and process interruptions in power transmission systems and components. Compared to conventional oils, they also offer greater resistance to oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils maximize fill intervals and maintain viscosity characteristics at wide temperature ranges.
DESCRIPTION
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
HOW TO USE
Follow equipment manufacturers recommendations for maintenance procedures and oil specifications. To ensure the longest possible life span for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of antioxidants in lubricating fluids. Moreover, sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information.
Molykote gearbox and chain oils have a shelf life of 60 months from date of manufacture. Refer to product packaging for use-by date.
PACKAGING
Molykote gearbox and chain lubricants are available in 18.9- and 208.2-L (5- and 55-gal) containers.
LIMITATIONS
These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
Molykote lubricating fluids are kosher approved and conform to USDA listing requirements under H-1 or H-2 designations (see Typical Properties table). An H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. An H-2 designation indicates the lubricated part cannot have contact with food.
SHIPPING LIMITATIONS
None.
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Viscosity @ 100C, cSt Viscosity @ 100F, cSt Viscosity @ 210F, cSt Viscosity @ 40C, cSt Viscosity Index Flash Point, F Pour Point, C Additive Package R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW T/PPD R&O/AW T/PPD R&O/AW Density @ 20C, g/mL Density @ 20C, lb/gal
Fire Point, F
AGMA2#
USDA
Molykote brand Product Gearbox Oils1 L-0115 Gear Oil ISO 150 L-0115FG Gear Oil ISO 150 L-0122 Gear Oil ISO 220 L-0122FG Gear Oil ISO 220 L-0132 Gear Oil ISO 320 L-0146 Gear Oil ISO 460 L-0146FG Gear Oil ISO 460 L-1115 Synthetic Blend Gear Oil - ISO 150 L-1115FG Synthetic Blend Gear Oil - ISO 150 L-1122 Synthetic Blend Gear Oil - ISO 220 L-1122FG Synthetic Blend Gear Oil - ISO 220 L-1132 Synthetic Gear Oil ISO 320 L-1146 Synthetic Gear Oil ISO 460 L-1146FG Synthetic Gear Oil ISO 460 L-01681 Gear Oil L-11681 Synthetic Gear Oil Chain Oils1 L-0460FG Blend Chain Oil (ISO 68) L-1468FG Synthetic Freezer Chain Oil (ISO 68) L-1428 High Temperature
1 2
H-23 H-14 H-2 H-1 H-2 H-2 H-1 H-2 H-1 H-2 H-1 H-2 H-2 H-1 H-2 H-2
149.4 150 223 219.1 312 456.6 441.1 145 134.7 211.6 197.8 342.5 455.2 380.2 659 674
14.8 15.4 20.4 20 31 32.8 33.1 15.6 17.4 19.5 24 30.8 45.1 39.2 42 48
169.3 170.1 265.6 249.7 349.5 507.5 507.5 162 151.3 251.8 220.8 388.6 512.4 428.3 764 772.1
15.2 15.9 21 20.7 31.6 33.8 34.2 16 17.8 20.2 24.7 31.8 46.5 40.4 43 51.2
100 100 101 101 134 107 107 100 122 120 142 126 154 147 105 128
500 500 510 490 460 575 575 515 435 500 440 540 545 545 485 505
530 530 550 510 515 620 620 530 470 510 490 590 595 595 555 580
-18 -18 -18 -21 -18 -18 -18 -18 -39 -21 -33 -39 -36 -36 -21 -27
4 4 5 5 6 7 7 4 4 5 5 6 7 7 8 8
0.86 0.86 0.86 0.86 0.87 0.87 0.88 0.87 0.85 0.87 0.85 0.85 0.852 0.852 0.88 0.85
7.16 7.16 7.16 7.16 7.24 7.24 7.32 7.24 7.07 7.24 7.07 7.07 7.09 7.09 7.32 7.07
90-140 PAO/PB 140 140 140 140 PAO/PB PAO MO/PB PAO/PB
66 65.8 285
8.3 9.8 24
8.6 10 26
30 30
MO PAO POE/PB
Typical values; not for use in preparing specifications. AGMA is an acronym for American Gear Manufacturers Association. 3 The H-2 designation indicates the lubricated part cannot have contact with food. 4 The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. We help you invent the future. www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. 2003 Dow Corning Corporation. All rights reserved.
Base Oil
SAE#
Product Information
DESCRIPTION
Molykote compressor and vacuum pump fluids are formulated to meet or exceed the performance of all comparable OEM fill products. Molykote offers solutions for a variety of applications and equipment including rotary and reciprocating equipment, screw, vise, centrifugal and piston compressors and vacuum pumps and blowers. Dow Corning supports oil analysis to ensure that the right product is used for each application and that product and equipment life and performance is maximized.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
Lower overall maintenance costs Wider temperature range Longer oil-drain intervals Reduced lubricant consumption Extended equipment lifetime Reduced energy consumption Long life reduces lubricant usage, maintenance costs
COMPOSITION
x
Mineral oil (MO), polyalphaolefin (PAO), polyalkylene glycol polyolester (PAG/POE), diester (DE) and mineral oil/diester (MO/DE) based lubricantss
HOW TO USE
Follow equipment manufacturers recommendations for maintenance procedures and oil specifications. To ensure the longest possible life for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of additives in lubricating fluids. Sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information.
PACKAGING
Molykote compressor and vacuum pump oils are available in 18.9- and 208.2-L (5- and 55-gal) containers, except for Molykote L-0668 Ammonia Refrigeration Compressor Oil, which is available in 208.2- and 1249-L (55- and 330-gal) containers.
LIMITATIONS
Do not mix Molykote L-3232 or L-3246 Synthetic Compressor Oil with mineral oil or PAO-based lubricants. These PAG-based products are not compatible with mineral oil or PAO lubricants. Molykote L-0268, L-1568 and L-1510 are intended for use in compressors or vacuum pumps handling corrosive gas such as HCI or methyl chloride. Because these products are not formulated with antioxidants, the total amount of oxygen should be no more that 2% of the gas stream.
SHIPPING LIMITATIONS
None.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. We help you invent the future. www.dowcorning.com
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Spec Grav @ 20C, g/mL Viscosity @ 40C, cSt Viscosity @ 100C, cSt Viscosity @ 100F, cSt Viscosity @ 210F, cSt Density @ 20C, lb/gal Flash Point, F Pour Point, C ISO Grade Fire Point, F Viscosity Index
Molykote brand Product Air Compressor Oil L-1232FG Synthetic Compressor Oil L-1232 Synthetic Compressor Oil L-3232 Synthetic Compressor Oil L-0246 Compressor Oil L-1246FG Synthetic Compressor Oil L-1246 Synthetic Compressor Oil L-3246 Synthetic Compressor Oil L-4646 Synthetic High Temp Compressor Oil L-1268 Synthetic Compressor Oil L-1210 Synthetic Compressor Oil L-4610 Synthetic Blend Piston Compressor Oil L-4611 Synthetic Reciprocating Compressor Oil Vacuum Pump Oil L-1668FG Synthetic Blend Vacuum Pump Oil L-0610 Vacuum Pump Oil Ammonia Compressor Oil L-0660 Para Synthetic Ammonia Refrigeration Compressor Oil L-0668 Ammonia Refrigeration Compressor Oil Special Purpose Fluids L-1605FG Synthetic Barrier Fluid L-4640 Synthetic Compressor Flush Fluid L-0268 Process Gas Oil L-1510 Process Gas Oil L-1568 Process Gas Oil
1 2 3
H-1 H-2 H-2 H-2 H-1 H-2 H-2 H-2 H-2 H-2 H-2
5.7 5.7 7.9 6.8 7.9 7.7 9.4 7.4 9 14 11.1 9.5
33 32.9 42.7 51.7 51.6 48.5 52.4 53.3 60 108 103.4 112
138 144 178 100 138 138 183 111 121 145 101 62
465 470 510 440 475 515 525 550 520 520 500 515
515 520 575 450 525 535 540 570 580 550 520 555
-60 -60 -48 -18 -42 -57 -45 -42 -54 -48 -15 -28
0.826 0.835 0.974 0.863 0.829 0.838 0.974 0.947 0.840 0.841 0.880 0.960
6.87 6.95 8.11 7.18 6.9 6.97 8.11 7.88 6.99 7 7.52 8.03
PAO PAO PAG/POE MO PAO PAO PAG/POE POE PAO PAO MO/DE DE
R&O R&O R&O R&O R&O R&O R&O R&O R&O R&O R&O R&O
H-1 H-2
68 100
63.1 106.9
9 12.4
70 117.7
9.3 12.7
113 100
445 500
465 525
-18 -18
0.856 0.867
7.12 7.22
PAO/MO MO
R&O R&O
H-2 H-2
68 68
69 63
9 6.7
77 65.4
9 6.9
100 59
440 345
475 360
-39 -30
0.87 0.897
7.24 7.46
MO MO
None
H-1 H-2 -
5 32-46 68 100 68
2 5.7 9 14 10
2 5.8 9 14 10
None R&O C1 C1 C1
Typical values; not for use in preparing specifications. The H-2 designation indicates the lubricated part cannot have contact with food. The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. 4 The oil date is also displayed in the Molykote Hydraulic Oils Data Sheet.
We help you invent the future is a trademark of Dow Corning Corporation. Molykote is a registered trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2006, 2007 Dow Corning Corporation. All rights reserved.
Base Oil
NSF Status
Product Information
DESCRIPTION
Molykote compressor and vacuum pump fluids are formulated to meet or exceed the performance of all comparable OEM fill products. Molykote offers solutions for a variety of applications and equipment including rotary and reciprocating equipment, screw, vise, centrifugal and piston compressors and vacuum pumps and blowers. Dow Corning supports oil analysis to ensure that the right product is used for each application and that product and equipment life and performance is maximized.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
Lower overall maintenance costs Wider temperature range Longer oil-drain intervals Reduced lubricant consumption Extended equipment lifetime Reduced energy consumption Long life reduces lubricant usage, maintenance costs
COMPOSITION
x
Mineral oil (MO), polyalphaolefin (PAO), polyalkylene glycol polyolester (PAG/POE), diester (DE) and mineral oil/diester (MO/DE) based lubricantss
HOW TO USE
Follow equipment manufacturers recommendations for maintenance procedures and oil specifications. To ensure the longest possible life for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of additives in lubricating fluids. Sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information.
PACKAGING
Molykote compressor and vacuum pump oils are available in 18.9- and 208.2-L (5- and 55-gal) containers, except for Molykote L-0668 Ammonia Refrigeration Compressor Oil, which is available in 208.2- and 1249-L (55- and 330-gal) containers.
LIMITATIONS
Do not mix Molykote L-3232 or L-3246 Synthetic Compressor Oil with mineral oil or PAO-based lubricants. These PAG-based products are not compatible with mineral oil or PAO lubricants. Molykote L-0268, L-1568 and L-1510 are intended for use in compressors or vacuum pumps handling corrosive gas such as HCI or methyl chloride. Because these products are not formulated with antioxidants, the total amount of oxygen should be no more that 2% of the gas stream.
SHIPPING LIMITATIONS
None.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. We help you invent the future. www.dowcorning.com
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Spec Grav @ 20C, g/mL Viscosity @ 40C, cSt Viscosity @ 100C, cSt Viscosity @ 100F, cSt Viscosity @ 210F, cSt Density @ 20C, lb/gal Flash Point, F Pour Point, C ISO Grade Fire Point, F Viscosity Index
Molykote brand Product Air Compressor Oil L-1232FG Synthetic Compressor Oil L-1232 Synthetic Compressor Oil L-3232 Synthetic Compressor Oil L-0246 Compressor Oil L-1246FG Synthetic Compressor Oil L-1246 Synthetic Compressor Oil L-3246 Synthetic Compressor Oil L-4646 Synthetic High Temp Compressor Oil L-1268 Synthetic Compressor Oil L-1210 Synthetic Compressor Oil L-4610 Synthetic Blend Piston Compressor Oil L-4611 Synthetic Reciprocating Compressor Oil Vacuum Pump Oil L-1668FG Synthetic Blend Vacuum Pump Oil L-0610 Vacuum Pump Oil Ammonia Compressor Oil L-0660 Para Synthetic Ammonia Refrigeration Compressor Oil L-0668 Ammonia Refrigeration Compressor Oil Special Purpose Fluids L-1605FG Synthetic Barrier Fluid L-4640 Synthetic Compressor Flush Fluid L-0268 Process Gas Oil L-1510 Process Gas Oil L-1568 Process Gas Oil
1 2 3
H-1 H-2 H-2 H-2 H-1 H-2 H-2 H-2 H-2 H-2 H-2
5.7 5.7 7.9 6.8 7.9 7.7 9.4 7.4 9 14 11.1 9.5
33 32.9 42.7 51.7 51.6 48.5 52.4 53.3 60 108 103.4 112
138 144 178 100 138 138 183 111 121 145 101 62
465 470 510 440 475 515 525 550 520 520 500 515
515 520 575 450 525 535 540 570 580 550 520 555
-60 -60 -48 -18 -42 -57 -45 -42 -54 -48 -15 -28
0.826 0.835 0.974 0.863 0.829 0.838 0.974 0.947 0.840 0.841 0.880 0.960
6.87 6.95 8.11 7.18 6.9 6.97 8.11 7.88 6.99 7 7.52 8.03
PAO PAO PAG/POE MO PAO PAO PAG/POE POE PAO PAO MO/DE DE
R&O R&O R&O R&O R&O R&O R&O R&O R&O R&O R&O R&O
H-1 H-2
68 100
63.1 106.9
9 12.4
70 117.7
9.3 12.7
113 100
445 500
465 525
-18 -18
0.856 0.867
7.12 7.22
PAO/MO MO
R&O R&O
H-2 H-2
68 68
69 63
9 6.7
77 65.4
9 6.9
100 59
440 345
475 360
-39 -30
0.87 0.897
7.24 7.46
MO MO
None
H-1 H-2 -
5 32-46 68 100 68
2 5.7 9 14 10
2 5.8 9 14 10
None R&O C1 C1 C1
Typical values; not for use in preparing specifications. The H-2 designation indicates the lubricated part cannot have contact with food. The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. 4 The oil date is also displayed in the Molykote Hydraulic Oils Data Sheet.
We help you invent the future is a trademark of Dow Corning Corporation. Molykote is a registered trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2006, 2007 Dow Corning Corporation. All rights reserved.
Base Oil
NSF Status
Product Information
Specialty Lubricants
FEATURES
" Extremely high load-bearing capacity " Resistant to galling through mixed friction. Wear protection due to solid lubricants and extreme pressure (EP) additives " Extremely adhesive due to incorporated adhesion improver " Good protection against corrosion " Contains no lead or nickel
c d
Fluid grease for the lubrication of highly stressed transmissions with metal gears APPLICATIONS
" Closed gears that are subjected to high stresses, frictional corrosion and moisture. " Used successfully for highly stressed gears that are subjected to high stresses, frictional corrosion and moisture.
TYPICAL PROPERTIES
COMPOSITION
" " " " " "
Mineral oil Lithium soap Solid lubricants Corrosion inhibitor Adhesion improver EP additives
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, density, viscosity DIN 51 818 ISO 2137 ISO 2811 DIN 51 562 Consistency class, NLGI1 Worked penetration Density at 20C (68F) Base oil viscosity at 40C (104F) Temperature Service temperature ISO 2176 Drop point C F C F ASTM-D147880 Low temperature torque test at -30C (-22F) Initial break-away torque Torque after 20 minutes running time DIN 51 805 Kesternich method - flow pressure at -40C (-40F) Four-ball tester DIN 51 350 T.4 DIN 51 350 T.5 Weld load Wear scar under 800N load Almen-Wieland machine OK load Resistance DIN 51 807 T.1 DIN 51 808 Water resistance, static evaluation step Oxidation resistance, pressure drop 100h, 99C (210F) bar 1-90 0.3 N 12000 N mm 3400 0.9 Nm Nm mbar 1120x10-3 220x10-3 340 -40 to +110 -40 to +230 190 374
2
Unit
Result Black 00
mm/10 g/ml mm /s
2
APPLICATION METHOD
Clean contact surfaces. Apply in the normal way using a brush, grease gun or automatic lubricating system. Can be used in centralised lubrication systems. Do not mix with other greases.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
White lubricating grease for metal/metal combinations with slow to fast movements and medium loads APPLICATION
Used successfully for bearings in machinery used in the food and pharmaceutical industries, in textile and paper making machines, domestic appliances and mechanical precision instruments.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard Test Color Unit Result White 2 mm/10 265-295 g/ml 0.9 mm/s 125 C C -30 to 110 +130 for short periods >=180
COMPOSITION
Mineral oil Lithium soap Solid lubricants Adhesion improver
NLGI consistency class Worked penetration Density at 20C Base oil viscosity at 40C
Temperature
Service temperature ISO 2176 ASTMD-1478-80 Drop point Low temperature torque test at -20C Initial break-away torque Torque after 20 minutes running time
Nm Nm
125x10 44x10
Speed
DN value mm/min 450000
Corrosion protection
DIN 51 802 SKF-Emcor method Degree of corrosion 0-1 % % 3.3 0.5
1. DN values are calculated approximations and will vary widely with temperature, load and bearing type.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
05/01/1998 DC 2910
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Black g/ml s C 0.91 73.2 Depends on the lubricating oil used
COMPOSITION
Mineral oil Molybdenum disulphide Dispersant
ISO 2811 4 DIN 53 211
Density, viscosity
Density at 20C (68F) Viscosity
Temperature
Service temperature
PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE,
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
11/12/2000 DC 3631
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" Paste lubrication up to +230C (+446F), dry lubrication up to +450C (+842F) " Good water resistance " Good volatilization properties " Compatible with many types of elastomers and plastics (test for compatibility)
c d
COMPOSITION
" Polyphenylmethyl siloxane oil " Lithium soap " Molybdenum disulphide
" Suitable for lubrication points with low to moderate loads and low speeds which are subjected to water and extreme temperatures. At temperatures above 230C (446F), the carrier volatilizes leaving virtually no residue, and the remaining dry sliding film itself takes over the lubrication up to +450C (+842F). " Suitable for lubricating parts consisting of materials that are not resistant to mineral oils. " This product is used successfully on metal/metal combinations with frictional and contact surfaces, brake anchor plates and the brake pistons of disc brakes.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Penetration, density, viscosity ISO 2137 ISO 2811 DIN 51 562 Unworked penetration Density at 20C (68F) Base oil viscosity at 25C (77F) Temperature Service temperature1 Service temperature1 C F -45 to +230 (paste-like) up to +450 (dry) -49 to +446 (paste-like) up to +842 (dry) mm/10 g/ml mm2/s 280-330 1.95 125 Unit Result Black-grey
Load-carrying capacity, wear protection, service life Four-ball tester DIN 51 350 pt.4 Weld load 1. Temperature resistance of solid lubricants. * DIN: Deutsche Industrie Norm. ISO: International Standardisation Organisation. N 2000
Clean the contact areas and apply with brush, spatula, grease gun or automatic lubricating device. Can be used in central lubricating systems.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers' tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 36 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. Dow Corning and MOLYKOTE are registered trademarks of Dow Corning Corporation. 1997-2003 Dow Corning Corporation. All rights reserved.
Product Information
FEATURES
x Excellent lubricating properties x Reduction of friction and wear x Resistant to oxidation x Extreme pressure resistance x Wide service temperature range
COMPOSITION
x Molybdenum disulphide
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Test Color Consistency Purity (MoS2 content) Particle size distribution (Laser Method Malvern Mastersizer in 2-propanol) Particle size (Fisher Method) Service temperature range Service temperature range (in vacuum) Theoretical density (solid state) Bulk density (powder state) Water/moisture content Almen Wieland machine OK load Press-Fit test Unit Result Black Free flowing powder 98 90 % <11.82 50 % <5.22 10 % <1.97 0.65 to 0.80 - 185 to +450 Up to 1100 4.8 0.5 0.05 > 20000 0.06
% m
m C C g/cm g/cm % N
HOW TO USE
Rub the powder thoroughly in different directions on degreased dry surfaces using a hard brush or window leather. Can be applied by rotary brush, felt or polishing disks. Small parts should preferably be tumble coated. Add to plastic elastomers and sinter metals before forming.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
PACKAGING
This product is available in 1kg can and 25 pail.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2008 Dow Corning Corporation. All rights reserved.
Product Information
c d
Solid lubricant paste for bolted metal joints; contains no lead or nickel APPLICATIONS
" Suitable for bolted joints that are subjected to high temperatures up to 650C (1202F) and to corrosive effects, and which, after assembling and the initial operation, have to be re-tightened or disconnected. In order to ensure constant pre-stressing forces, uniform and steady coefficients of friction of the lubricant are necessary. " Used successfully for cylinder head bolts, nozzle head screws of plastic injection molding machines, bolted joints in the chemical industry, and also for the tension rings of centrifuges.
COMPOSITION
" " " "
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Penetration, density ISO 2137 ISO 2811 Unworked penetration Density at 20C (68F) Temperature Service temperature1 C F Load-carrying capacity, wear protection, service life Four-ball tester DIN 51 350 pt.4 Weld load DIN 51 350 pt.5 Wear scar under 400N load Almen-Wieland machine OK load Frictional force Coefficient of friction Screw test - thread2 Screw test - head Initial break-away torque3 DIN 51 802 SKF-Emcor method Nm 0.13 0.08 135 1 N N 20000 2600 N mm 4800 0.08 -18 to 1093 -20 to 2000 mm/10 g/ml 280-310 1.26 Unit Result Brown
1. Temperature resistance of solid lubricants. 2. Coefficient of friction in bolted connection, M12, 8.8, on blackened surface. 3. M 12, with starting torque Ma = 62Nm and heat treatment at 540C (1004F), 21h, bolt material: no. 1.7709. * ISO: International Standardisation Organisation. DIN: Deutsche Industrie Norm.
If possible, clean the thread and the bolt with a wire brush. Spread an adequate amount of the paste on the thread, right up to its root in order to obtain a good seal. In order not to alter the properties, the paste must not be mixed with grease or oils. To enable this product to be applied more quickly and cleanly to larger areas, it is advisable to use the spray can.
Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
www.dowcorning.com
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product
MOLYKOTE 1000 Solid lubricant paste 2 Ref. no. 71-0218 -01 20/02/2002 DC 2909 WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
Silicone oil Inorganic thickener Additives
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Parameter Physical nature Color ISO 2137 ISO 2137 CTM 0033A CTM 0033A Penetration unworked Penetration, worked 60, max. Bleed 24 hours/200C (392F), max. Evaporation 24 hours/200C (392F), max. Melting point mm/10 mm/10 % % C F Unit Value Stiff compound White to light grey, translucent 175 to 210 260 0.5 2.0 None None
* CTM: Corporate Test Method, copies of CTMs are available on request. ISO: International Standardisation Organisation
by dispersing in solvents such as xylene, mineral spirits and methyl ethyl ketone. DOW CORNING 111 Silicone Compound can then be applied by brushing, dipping or spraying. DOW CORNING 111 Silicone Compound should not be applied to any surface which will be painted or finished. Such coatings may not
adhere to the silicone-treated surface. If contaminated by a silicone coating, parts can be wiped or washed with solvent, washed with detergent, or immersed in an alcoholic potassium hydroxide solution and then rinsed in clear water before painting.
Solubility
DOW CORNING 111 Silicone Compound is insoluble in water, methanol, ethanol, or mineral oil, and soluble in Chlorothene NU*, perchloroethylene, mineral spirits and methyl ethyl ketone. The greater the consistency (lower penetration value), the lower the solubility of the specific silicone compound. The suitability of the particular solvent should be based on testing prior to regular use. Flammability and toxicological properties should be important considerations in the choice of a solvent.
BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent. * Chlorothene NU is a registered trademark of the Dow Chemical Company.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
Chemical resistance
DOW CORNING 111 Silicone Compound is not greatly affected by mineral oils, vegetable oils or air. It is generally resistant to dilute acids and alkalines, and to most aqueous solutions. DOW CORNING 111 Silicone Compound is quite resistant to a wide variety of organic and inorganic chemicals. Because each application may vary in chemical composition, pressure, flow velocity, relubrication requirements and equipment design, it is recommended that the silicone compound be tested before adopting for regular use. DOW CORNING 111 Silicone Compound is not to be used with liquid oxygen and should not be used in applications requiring LOX compatibility.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HANDLING PRECAUTIONS
DOW CORNING 111 Silicone Compound may cause temporary discomfort when in direct contact with eyes. In case of eye contact, flush eyes with water. PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED.
2 Ref. no. 22-1087C-01
Product Information
COMPOSITION
Synthetic oil Solid lubricants Inorganic thickener Adhesion improver
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Black C 10 to 160 250-280
Temperature
Service temperature range Unworked penetration Four-ball tester (VKA) DIN 51 350 pt.5 Wear scar under 600N load DIN 51 350 pt.4 Weld load Almen Wieland machine OK load
Density, viscosity
Density at 20C Base oil viscosity at 40C * DIN: Deutsche Industrie Norm
Gears
The tooth profiles of new gears should be treated with DOW CORNING G-n Metal assembly paste or spray and run without load for a short time to generate a basic solid lubricating film. The gears should then be lubricated with DOW CORNING 1122 Chain and Open Gear Grease in accordance with the gear manufacturer's instructions.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Product Information
Release agent and lubricant for many food and industrial applications APPLICATIONS
For food and beverage industry processing: Reduces build-up on heat seal bars, resulting in increased heat transmission and sealing speed; reduced package discoloration; reduced cleaning time Releases evaporated milk and powdered milk from evaporator and preheater tubes Reduces adhesion of residues on heating coils and cooking kettles Lubricates sliding doors on display cases, refrigerator and freezer door gaskets Helps prevent seizing and jam-ups of conveyor guide rails and scrambler tables Facilitates the release of frozen vegetables and fruits from tray and freezer filling spouts Reduces adhesion of dried foods (dates, tea cubes, etc.) to drying trays and large cheese wheels to storage shelves Hastens the removal of dried food from stove burners and ovens; helps prevent adhesion of grease; makes cleaning stainless steel fixtures and counter tops easier Helps prevent glasses from sticking to cooling cones of glass frosting equipment Helps sugar release from processing and packaging equipment such as guides, dispensing chutes, table tops, and drying trays In high-speed rotary letterpress printing: Increases metal release from tail sheets Allows saw blades, saw tables, and storage trays to work more smoothly Reduces sticking of conveyors, pulleys, and valves In the bindery industry: Reduces build-up on glue pots and paste jars Makes tables and cutter surfaces slippery, so paper magazines, books, and bundled newspapers can be handled easier continued on next page
COMPOSITION
Heat-stable silicone compound
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Test Color Drying time Flash Point (Bulk) Density (Bulk), at 25C (77F) Unit minutes C (F) g/mL Result Clear Approx. 3 42 (108) 0.75
For flexography applications: Helps prevent ink from creeping onto idle rollers used in printing gift wrap, multi-wall bags, and similar applications In addition to specific industry-related uses, Dow Corning 316 Silicone Release Spray also: Helps prevent glue from adhering to walls of containers; makes it easier to remove dried glue from equipment Lubricates dispensing valves, package and coil chutes of automatic vending machines Promotes removal of hosiery from boarding forms Makes ironing easier by reducing friction on hand irons and pressing equipment Provides for smooth, easy cutting and reduces binding when applied to the cutting edges of tools; reduces clogging of saw teeth when sawing gummy woods or nonferrous metals Provides for smoother, faster materials handling on chutes, tables, and rollers
problems, it can be used in many industries. The silicone film formed by Dow Corning 316 Silicone Release Spray resists breakdown due to oxidation, which can leave carbonaceous residues or gummy surfaces. Once dried, it has low volatility at temperatures up to 199C (390F).
Freshly cleaned heat-sealing units, such as irons and bars, should be broken in at full operating temperature for a short period after applying Dow Corning 316 Silicone Release Spray. After any excess has been wiped off, the unit is ready for use. NOTE: Because Dow Corning 316 Silicone Release Spray has such a wide range of uses, securing or including complete information on those uses, such as reapplication schedules and amount to use, is impractical. For this reason, the suitability of Dow Corning 316 Silicone Release Spray should always be tested before it is adopted for regular use.
HOW TO USE
Dow Corning 316 Silicone Release Spray should be applied to clean surfaces. Clean off any surface residue with a fine emery cloth or scouring powder until the surface is shiny; then wipe with a clean cloth moistened with solvent to remove dirt and abrasive particles. Methods of application vary, depending upon the size, accessibility, and complexity of the unit to be processed or packaged. Usually, Dow Corning 316 Silicone Release Spray is sprayed in a light film. Approximately three minutes drying time should be allowed. Dow Corning 316 Silicone Release Spray can also be buffed onto metal surfaces with a hand buffer. Only a thin film is needed for effective release. This film should be restored as required.
Solubility
Dow Corning 316 Silicone Release Spray is insoluble in water, ethanol, acetone, glycol, and glycerin. It can be dispersed in naphtha. NOTE: When using any solvent, always provide adequate ventilation. Follow precautions on solvent container label.
DESCRIPTION
Dow Corning 316 Silicone Release Spray is a heat-stable, silicone antistick agent. Effective in solving a wide range of sticking or adhesion
CAUTION
Dow Corning 316 Silicone Release Spray should not be applied to surfaces that will later be painted, since it may interfere with the adhesion of the paint.
FDA/USDA STATUS
Dow Corning 316 Silicone Release Spray complies with FDA 21 CFR 175.300 covering resinous and polymeric coatings, subject to end user compliance with applicable total extractives limitations. It is also acceptable for use in federally inspected meat and poultry plants (previously designated by USDA H-1 status).
conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers tests to ensure that Dow Cornings products are safe, effective, and fully satisfactory for the intended end use. Dow Cornings sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
PACKAGING
Dow Corning 316 Silicone Release Spray is supplied in 284-g (10-oz) aerosol cans, 454-g (16-oz) pump spray containers, and 14.1-kg (5-gal) pails.
HANDLING PRECAUTIONS
This product contains a flammable solvent. Do not spray in a confined space where the possibility of spark ignition exists. This or similar situations could result in a flammability hazard. PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE FROM YOUR DOW CORNING REPRESENTATIVE, OR DISTRIBUTOR, OR BY CALLING YOUR GLOBAL DOW CORNING CONNECTION.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
SHIPPING LIMITATIONS
DOT Classification: Dow Corning 316 Silicone Release Combustible liquid; Dow Corning 316 Silicone Release Spray Flammable gas.
WARRANTY INFORMATION
The information contained herein is offered in good faith and is believed to be accurate. However, because
AGP4934
Dow Corning is a registered trademark of Dow Corning Corporation. 1997, 2000 Dow Corning Corporation. All rights reserved.
Product Information
TYPICAL PROPERTIES
These values are not intended for use in preparing specifications. Method Test Color Density at 77F (25C) Viscosity 100F (38C) 210F (99C) Flash Point Pour Point Unit lb/gal SUS SUS F (C) F (C) Result Black 8.3 650 105 450 (232) -20 (-29)
COMPOSITION
A stable dispersion of microscopic graphite particles in a polyalkylene glycol carrier fluid Supplied as low-viscosity fluid Forms solid lubricant film after fluid evaporation
ASTM D 88
ASTM D 92 ASTM D 97
Specification Writers: Please obtain a copy of the Dow Corning Sales Specification for this product and use it as a basis for your specifications. It may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (517) 496-6000.
HOW TO USE
Dow Corning C-40 High Temperature Chain Lubricant can be used as supplied and requires no stirring. It can be applied manually by brush or hand oiling, as well as with such automatic lubrication equipment as drop-feed, wick, brush and oil-mist systems. Amount supplied may be adjusted to avoid smoking. For best results, it should be applied to surfaces under 250F
(121C). Best operating conditions, however, are over 350F (177C) at
which point the polyalkylene glycol is cleanly volatized from the surface. Continuous operation between 250 and 350F (121 and 177C) may cause gumming.
AUTHORIZATIONS
Dow Corning C-40 High Temperature Chain Lubricant meets the requirements of USDA H-2.
PACKAGING
Dow Corning C-40 High Temperature Chain Lubricant is supplied in 1quart, 5-gal and 55-gal (2-, 40- and 450-lb) containers, net weight.
USE LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
SHIPPING LIMITATIONS
AV00823
None.
A worker fills the reservoir of an automatic oiler designed to apply one shot of Dow Corning C-40 High Temperature Chain Lubricant to each conveyor bearing as it passes underneath. The oils glycol carrier evaporates in a 530 F (277 C) bake oven without leaving a residue. The graphite constituent of the lubricant remains to keep the bearings rolling freely.
AGP4480
Dow Corning is a registered trademark of Dow Corning Corporation. 1997, 1999 Dow Corning Corporation. All rights reserved.
Product Information
c d
Copper paste for components subjected to high temperatures, high pressures and corrosive influences APPLICATIONS
" Well suited for all areas which need to be protected against water, steam and corrosion, e.g. brake mechanisms, flange seals, exhauster bolts.
TYPICAL PROPERTIES
COMPOSITION
" Powdered copper " Partly synthetic oil " Inhibitor
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, density, viscosity ISO 2137 DIN 53 217 DIN 51 562 Unworked penetration Density at 20C (68F) Base oil viscosity at 40C (104F) Temperature Service temperature C F ISO 2176 Drop point C F Load-carrying capacity, wear protection, service life Four-ball tester DIN 51 350 pt.4 Weld load DIN 51 350 pt.5 Wear factor under 800N load Almen-Wieland machine OK load Coefficient of friction Press-Fit test = Screw test: Coefficient of friction of bolt connection M12, 8.8, blackened surface - thread - head Initial break-away torque (M12 with starting torque Ma=80Nm and heat treatment at 300C/572F, 21h, bolt material: C 45, 8.8, mat.no. 1.0503) Nm 0.17 0.10 110 0.07 N >20000 N mm 2500 1.0 -30 to +650; paste effective to +300 -22 to +1202; paste effective to +572 None None mm/10 g/ml mm2/s 320-370 1.0 1100 Unit Result Copper colored
If possible, contact surfaces should be cleaned. Then apply paste with a brush or cloth. Excess lubricant need not be removed. MOLYKOTE Cu-7439 Plus Paste can be used in grease guns and centralised lubrication systems.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
www.dowcorning.com
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
Solid lubricants Solvents Binder
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Grey-black s g/ml % months min/C C N
Physical properties
DIN 53211/3 DIN 53217/2 CTM 0242 I Viscosity at 20C (DIN3 cup) Density at 20C Nonvolatile content Storage life 1.07 29 24 5/23 -180 to +450 b =4500 p=12500 s=6800 b = 212 p=146 s=306 b = 178 p = 400 s = 362
Temperature
Curing time Service temperature range ASTM-D2625 Falex load-carrying capacity
ASTM-D2714
ASTM-D2714
LFW-1, rotating F=2860N, n=72 minutes, v=7.9m/minutes no. of revolutions x1000 to =0.1 LFW-1, oscillating F=900N, frequency=89.5osc./minutes no. of oscillations to =0.08
Coefficient of friction
Press-Fit test, = 1. Surface pretreatment: b = blank, p = phosphated, s = sand blasted. * CTM: Corporate Test Method, copies of CTMs are available on request. ASTM: American Society for Testing and Materials. DIN: Deutsche Industrie Norm
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
How to apply
Stir the Anti-Friction Coating thoroughly before applying by spraying or brushing. Recommended dry film thickness: 5 to 20m.
warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
Curing
5 minutes at 23C
Solubility
Thinning can be carried out using MOLYKOTE L 13 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
Product Information
Specialty Lubricants
FEATURES
" Superior load carrying capability and wear resistance " Uses a synthetic oil base, so has a broad range of service temperatures " Compatible with most plastics " Has a long life under reciprocating motion " Does not contain silicone thereby preventing problems with contact point failures
MOLYKOTE E Paste
c d
A high-load/high-wear durability paste based on a synthetic oil, developed specifically for plastic components APPLICATIONS
" Automobiles, electrical appliances, precision equipment, audio equipment, and office equipment that have plastic parts. " Can be used with plastic-on-plastic, metal-on-metal, or plastic-on-metal friction parts.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* JIS K 2220 Parameter Appearance Penetration (worked 60 times) NLGI class Service temperature range Density JIS K 2220 JIS K 2220 JIS K 2220 Bleed (100C 24 hours) Evaporation (99C 22 hours) Copper corrosion (100C 24 hours) N mm Cycle C g/cm3 % % mm/10 Unit Value Light yellow 280 2 -50 to 150 1.18 1.0 0.2 1a 5500 0.50 >20,000 0.08 Ncm Ncm 24.5 6
COMPOSITION
" Poly--olefin " Special solid lubricants
ASTM D 2596 Four ball weld load (1500rpm/1minute) ASTM D 2266 Four ball wear scar (1740rpm, 392N, 1 hour) LFW-1 reciprocating motion test Useful life (90, 2700N, 75cpm, Rc60) Coefficient of friction (after 6000 cycles) JIS K 2220 Low temperature torque test (-40C) Starting torque Running torque
Compatiblity test for various plastics (bend strain test at 60C, 500 hours) ABS Resin Polycarbonate resin Nylon resin Polyacetyl resin *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials. No cracks or discoloration No cracks or discoloration No cracks or discoloration No cracks or discoloration
HOW TO USE
Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
CAUTION 1. Data included in this document are average values, not specification values. Any applications for this product given in this document are merely examples. Perform thorough evaluations to confirm functionality, effectiveness, and safety before use. 2. No guarantees are made that the applications described in this document are free from infringements of any patent. 3. This product was developed for industrial use, and is not intended for use in medical equipment, pharmaceutical products, etc. 4. Be sure to read the material safety data sheet (MSDS) and container label for this product before use. 5. Contact Dow Corning Asia, Ltd., before reproducing any data from this document. WE HELP YOU INVENT THE FUTURE."
HANDLING PRECAUTIONS
This product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling. At high temperatures in excess of 200C, the breakdown of fluorinated polymer can cause the release of a small amount of toxic gas. Ensure adequate ventilation.
When stored, unopened in a cool, dark place this product, has a usable life of 36 months from the date of production.
PACKAGING
This product is available in 1kg cans (10 cans/case) and 20kg pails.
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 2002 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
Excellent lubricating properties Good resistance to water washout x High load carrying capacity x Compatible with many plastics or elastomers x Meets FDA Regulation 21 CFR 178.3570 and H1 classification for incidental food contact x Available in NLGI consistency class 0, 1 and 2
x x
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Test DIN 51 818 ASTM D217 ISO 2811 ASTM D 445 Property Color NLGI Consistency Penetration Density at 20C Viscosity @ 40C Service temperature ASTM D2265 ASTM D2596 ASTM D2266 ASTM D1264 Fed 791 Fed 791 Drop point Four-ball weld load Four-ball wear scar Water wash-out, 175F Oil bleed, 24 hrs @ 100C Oil evaporation, 24 hrs @ 100C Unit G-0050 White 0 370 0.89 70
-17 to +150 0 to +302
G-0052 White 2
COMPOSITION
x x x
mm/ 10
g/ml cst C F C F N mm % % %
ASTM: American Society for Testing and Materials ISO: International Standardization Organization DIN: Deutsche Industrie Norm
HOW TO USE
Clean points of contact. Molykote White E.P. Bearing Grease can be applied by hand packing, hand operated grease gun, automatic greasing systems and central lubricating systems. When lubricating antifriction bearings, follow the bearing manufacturers instructions. For plain bearings the new grease should be pumped in until old grease is flushed from system.
DESCRIPTION
Molykote White E.P. Bearing Greases are high performance lubricants designed for the food and beverage industry. They are a mineral based lubricant thickened with aluminum complex and fortified with EP additives. Applications include bearings, gears, chains and sliding mechanisms in manufacturing processes. They are an excellent choice where NSF H1 status lubricant is required or when the product must be free of black particle contamination.
HANDLING PRECAUTOINS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com.
PACKAGING
This product is available in cartridges, pails and drums.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Dow Corning is a registered trademark of Dow Corning Corporation. 2002 Dow Corning Corporation. All rights reserved.
P R O D U C T
I N F O R M A T I O N
Information About Molykote G-4500 Multi-Purpose Synthetic Grease and Molykote G-4700 Extreme Pressure Synthetic Grease
BENEFITS Both Molykote G-4500 Multi-Purpose Synthetic Grease and Molykote G-4700
Extreme Pressure Synthetic Grease: Are formulated to provide higher load carrying capacity, greater wear resistance and longer service life compared with conventional petroleum-based lubricants Are NLGI #2 greases Provide good compatibility with most industrial and engineering substrates including many plastic and rubber materials Excellent low temperature torque and water washout resistance Molykote G-4500 Multi-Purpose Synthetic Grease features: A unique formulation that includes polyalphaolefin (PAO) base oil, aluminum complex thickener and polytetrafluoroethylene (PTFE) as well as other fortifiers Meets FDA Regulation 21 CFR 1789.3570 as a lubricant with incidental food contact
Type
Synthetic lubricants
Physical Form
Greases, NLGI #2
Special Features
Multi-purpose capabilities; wide temperature operating range; broad compatibility
LIMITATIONS
These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
Primary Use
Long-term lubrication for assembly and maintenance
AUTHORIZATIONS
Molykote G-4500 Multi-Purpose Synthetic Grease complies with FDA Regulation 21 CFR 178.3570 as a lubricant with incidental food contact.
USES
Both greases can be used with rolling element and plain bearings, pivot pins, cams, guides, ways, drive screws, gears, splines and other machine elements.
Compatibility rating for elastomers is based on relative percent change in volume after 70 hours at 70C (158F). Compatibility rating for plastics is based on relative percent change in volume after 70 hours at 70C (158F). 2 Viton is a registered trademark of E.I. du Pont de Nemours Company.
TYPICAL PROPERTIES1 These values are not intended for use in preparing specifications. Molykote G-4500
Multi-Purpose Synthetic Grease ASTM D 445 Base Oil Viscosity, at 104F (40C), cSt .............................................................. at 212F (100C), cSt ............................................................ Thickener Type ......................................................................... Penetration at 77F (25C), mm/10 (W/60) ............................... Specific Gravity at 77F (25C) ................................................ Dropping Point, F (C), min .................................................... Bleed/Evaporation, 24 hours at 212F (100C) ......................... Low Temperature Torque at -40F (-40C), Nm ...................... Four Ball Wear, 40 kg, 1200 rpm, mm ....................................... Four Ball EP, Weld Load, kg, min .............................................. Timken OK Load, lb, min .......................................................... Temperature Range, estimated, F (C) ..................................... Dn, bearing ID (mm) rpm, estimated ...................................... 110 13.5 Aluminum Complex 265-295 0.84 520 (271) 3.1/0.4 0.9 0.50 315 40 -60 to 325 (-51 to 163) 325,000
Molykote G-4700
Extreme Pressure Synthetic Grease 150 20 Lithium Complex 265-295 0.87 545 (285) 2.5/0.2 1.1 0.32 400 60 -40 to 350 (-40 to 177) 350,000
ASTM D 217 ASTM D 2265 FTM 321.1 ASTM D 4693 ASTM D 2266 ASTM D 2596 ASTM D 2509
Specification Writers: Please obtain copies of the Dow Corning Sales Specifications for these products and use them as a basis for your specifications. They may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (989) 496-6000.
use shall not be taken as inducements to infringe any patent. Dow Cornings sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE
HOW TO USE
Apply using conventional grease application methods, i.e., clean brush, grease gun and manual or automated dispensing equipment.
SHIPPING LIMITATIONS
None.
PACKAGING
Molykote G-4500 Multi-Purpose Synthetic Grease and Molykote G-4700 Extreme Pressure Synthetic Grease is available in 3-oz (85-g) tubes, 14.1-oz (400-g) cartridges, 35.3-lb (16-kg) pails and 397-lb (180-kg) drums. Molykote G-4500 Multi-Purpose Synthetic Grease is also available in an 11 oz. aerosol can.
FUTURE. www.dowcorning.com
03/11/02 FPH29501
Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. 2002 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" High load-carrying capacity " Low coefficient of friction, ( = 0.09, no stick-slip) " Prevents frictional corrosion and scoring " Protection from stick-slip " Good anti-corrosion properties " Reduces formation of fretting corrosion " Simplifies dismantling processes " High surface covering capacity (40m2/kg)
c d
MOLYKOTE G-N PLUS Solid Lubricant Paste
Solid lubricant paste for the assembly and running-in of metal components APPLICATIONS
" Press-fit production of all types of machine elements, as a running-in lubricant for new machines and gear-boxes. " Permanent lubrication of machine elements that are moved only rarely or slightly and also for drilling, sawing and thread cutting. " Used successfully for lubricating threaded spindles, splined shafts, toothed gears, worm and transmission gears, screws, valves, pumps, machine-tool guides and also for the tightening and fitting of roller bearings, washers, wheels, flanges and bolts.
COMPOSITION
" Mineral oil " Solid lubricants " Thickener
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Penetration, density ISO 2137 ISO 2811 Unworked penetration Density at 20C (68F) Temperature Service temperature1 C -25 to +450 with reduced air access +630 -13 to +842 with reduced air access +1166 mm/10 g/ml 280-310 1.35 Unit Result Black
Load-carrying capacity, wear protection, service life Four-ball tester DIN 51 350 pt.4 Weld load DIN 51 350 pt.5 Wear scar under 800N load Almen-Wieland machine OK load Frictional force Coefficient of friction Press-Fit test = Screw test: Erichsen Screw test - head
2
N mm N N
Clean the sliding surfaces or contact areas, then apply paste with a brush, cloth, synthetic sponge or window leather. Do not use in excess as with grease lubrication. Vigorous rubbing into metal surface will improve adhesion. Do not mix with greases or oils.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
www.dowcorning.com
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers' tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
MOLYKOTE G-N PLUS Solid Lubricant Paste 2 Ref. no. 71-0083B-01
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. 13/09/2002 DC 2930 Dow Corning and MOLYKOTE are registered trademarks of Dow Corning Corporation. 2002 Dow Corning Corporation. All rights reserved.
Product Information
Lubricating grease for metal/metal combinations with slow to medium-fast movements especially with high loads APPLICATIONS
Used successfully for bearings, spline profiles and clutches in highly stressed motor vehicles, tractors, cranes, earth-moving machines, conveyor belts and forklift trucks. Also where there is a risk of fretting corrosion, groove formation (Brinell effect) or moisture.
COMPOSITION
Mineral oil Lithium soap Solid lubricants EP additive Corrosion inhibitor Adhesion improver
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Black 2 265-295 0.9 265 -25 to +110, short period +130 >=175
Temperature
Service temperature ISO 2176 ASTMD-1478-80 Drop point Low temperature torque test at -20C Initial break-away torque Torque after 20 minutes running time Four-ball tester DIN 51 350 T.4 Weld load DIN 51 350 T.5 Wear scar under 800N load Almen-Wieland machine OK load Frictional force with OK load DIN 51 82102A FAG roller element bearing tester FE 9, 4500/6000-110, F}
Nm Nm
420x10 35x10
Speed
DN value mm/min 250000 0.3
Resistance
DIN 51 808 Oxidation resistance, pressure drop 100h, bar 99C
Corrosion protection
DIN 51 802 SKF-Emcor method Degree of corrosion 0-1
Oil separation
Standard test 1. Calculated viscosity value of base oil mixture. * ASTM: American Society for Testing and Materials ISO: International Standardisation Organisation DIN: Deutsche Industrie Norm
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
30/11/1998 DC 2943
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" Long-term corrosion protection " Transparent coating " Low coefficient of friction
c d
" Corrosion protection for metal parts which have to be stored or transported.
COMPOSITION
" " " "
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Density ISO 2811 Density at 20C (68F) Flash point Coefficient of friction Press-Fit test = Corrosion protection ISO/R 1456 Salt spray test h 510 * ISO: International Standardisation Organisation 0.12 g/ml C F 0.84 28 82 Unit Result Transparent
HANDLING PRECAUTIONS
Avoid contact with the eyes. Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
Apply to cleaned surfaces by dipping, spraying or painting. Drying time at room temperature approx. 90 minutes. Several coats can be applied to enhance corrosion protection (letting them dry in between). Thinner coatings can be achieved by diluting with white spirit. By virtue of the compatibility of MOLYKOTE Metal Protector Plus with common lubricants, there is usually no need to wash off the film before using the devices/equipment. Should this be necessary, it can be done with white spirit. After use, clean spray can valves by spraying inverted.
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
www.dowcorning.com
MOLYKOTE Metal Protector Plus Wax solution 2 Ref. no. 71-0151C-01 25/01/2002 DC 3638
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 0-2002 Dow Corning Corporation. All rights reserved.
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Black g/ml 0.87
COMPOSITION
Mineral oil Inhibitors Adhesion improver Solid lubricants Solvents
Density
Density at 20C Four-ball tester (VKA) DIN 51 350 pt.4 Weld load DIN 51 350 pt.5 Wear scar under 800N load
Corrosion protection
DIN 51 802 SKF-Emcor method Degree of corrosion 0-1
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
13/11/1998 DC 3629
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
Sliding surfaces and friction contacts exposed to heavy loads, especially at low to medium speeds.
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
BENEFITS
x Mineral oil x Aluminum complex thickener x Solid lubricants
Standard
Property
Unit
Value
Color Consistency, Density, Viscosity NLGI Consistency Class Unworked penetration Density at 20C Base oil viscosity at 40C Temperature Service temperature range Load carrying capacity, wear protection, speed Four ball tester, weld load Four ball tester, wear scar under 800N load Coefficient of friction Screw test (Erichsen); coefficient of friction in bolt connection M 12 8.8; thread head Screw test (Erichsen); coefficient of friction in bolt connection M12, material no. 1.4301 thread head Initial breakaway torque at 300C / 21 hours with material no. 1.7709 (starting torque M = 56 Nm) Press-Fit test, = Resistance Water resistance, static
White
N mm
3200 0.90
0.10 0.10
Nm
0.11 0.11 85
0.10 no chatter 1 - 90
DIN 51807 T1
* CTM: * DIN:
Corporate Test Method, copies of CTMs are available on request. Deutsches Institut fuer Normung.
Molykote P-1900 is a mineral oil based food grade paste, which meets FDA regulations 21 CRF 178.3570 and NSF H1 classification for incidental food contact. Molykote P-1900 offers excellent low coefficient of friction and high load carrying capacity
DESCRIPTION
PACKAGING
Molykote P-1900 is available in 400g cartridges, 1kg cans, 25kg pails and 180kg drums. Samples are available in 1kg cans. .
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HOW TO USE
The contact points should be cleaned, wherever possible. Paste should be applied using a suitable brush. It can be delivered by a grease gun. Excess lubrication does not harm.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection
Molykote P-1900 has a usable life of 60 months when stored at or below 20C in the original unopened containers.
www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2003 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
Highly pure (less than 500mg of sulphur, less than 200mg of chlorine and fluorine per kg of lubricant) Can be used at temperatures up to 1400C (2552F) Coefficient of friction in the range of oiled bolts Low scatter of prestressing force on tightening Avoidance of stress cracks and solder brittleness Enables non-destructive loosening of bolted joints even after long use at high temperatures
Extremely pure, solid lubricant paste for bolted joints. It contains no lead, nickel, sulphur, chlorine or fluorine APPLICATIONS
Suitable for screws, nuts and bolts that are subjected to extremely high temperatures and which are made of heat-resistant or extremely heat resistant steels, eg those made from nickel-based alloys. Used successfully for the bolted joints of gas and steam turbines in power stations.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard Test Color Unit Result Grey-Black mm/10 g/ml C F N mm 280-310 1.2 -40 to 1400 -40 to 2552 4400 1.7 0.15 0.09 126
Penetration, density
ISO 2137 ISO 2811 Unworked penetration Density at 20C (68F)
SPECIFICATIONS
Complies with Siemens TLV 9600 02/01 Complies with General Electric TIL 1117-3RI Complies with EDF-PMUC 04034 Complies with Pratt & Whitney PWA-36246
Temperature
Service temperature
Coefficient of friction
Screw test - thread Screw test - head Initial break-away torque
COMPOSITION
Solid lubricants in practically sulphur free, partly synthetic oil Thickener Adhesion improver
Nm
1. Temperature resistance of solid lubricants. 2. Coefficient of friction in bolted connection, M12 x 1.75, material 8.8, blackened. 3. M 12 x 1.75, with starting torque Ma = 56 Nm and heat treatment at 540C (1004F), 21 hours, bolt material: 21 Cr Mo Ni V 57 mat no. 1.7709.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your
local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 0-2001 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" " " " " " "
c d
Excellent adhesion Good corrosion protection Good water resistance Good antifretting Assembly and continuous lubrication Metal-free Low water pollution class
Metal-free adhesive lubrication paste which can be used for all assembly and continuous lubricating jobs, particularly those exposed to corrosive environments such as splash water or humidity APPLICATIONS
" Assembly and threaded connections, spline shafts, mounting of bearings. " Continuous lubrication: for various parts in brake systems, in brake rods, guide bolts. Axles of commercial vehicles, cams and plain bearings. Open Gears. Marine applications.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Test Method* Parameter Color Consistency, viscosity ISO 2137 DIN 51 562 Unworked penetration Base oil viscosity at 40C (104F) Temperature Service temperature - as paste: - solid lubricants: Deutsche Bahn AG test - stirrability at -35C (-31F) DIN 51 805 DIN 2176 Kesternich method - flow pressure at -30C mbar (-22F) Drop point C F Load-carrying capacity, wear protection, service life Four-ball tester (VKA) DIN 51 350 pt.4 Weld load DIN 51 350 pt.5 Wear scar under 800N load Fretting corrosion - Deyber tester Coefficient of friction Press-Fit test, = Screw test - thread1 Screw test - head SRV Optimol
1
Unit
mm/10 mm /s
2
310-350 360
C F C F
-40 to +230 -40 to +446 -40 to +1200 -40 to +2192 4 960 None None
N mm
The sliding surfaces should be cleaned. The paste should then be applied with a suitable brush, rag or grease gun. It should not be mixed with greases or oils.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
www.dowcorning.com
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
MOLYKOTE P 40 Metal-free adhesive lubricating paste 2 Ref. no. 71-0246C-01 20/02/2002 DC 3829
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1998-2002 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" Long-term corrosion protection " Transparent coating " Low coefficient of friction
c d
" Corrosion protection for metal parts which have to be stored or transported.
COMPOSITION
" " " "
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Density ISO 2811 Density at 20C (68F) Flash point Coefficient of friction Press-Fit test = Corrosion protection ISO/R 1456 Salt spray test h 510 * ISO: International Standardisation Organisation 0.12 g/ml C F 0.84 28 82 Unit Result Transparent
HANDLING PRECAUTIONS
Avoid contact with the eyes. Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
Apply to cleaned surfaces by dipping, spraying or painting. Drying time at room temperature approx. 90 minutes. Several coats can be applied to enhance corrosion protection (letting them dry in between). Thinner coatings can be achieved by diluting with white spirit. By virtue of the compatibility of MOLYKOTE Metal Protector Plus with common lubricants, there is usually no need to wash off the film before using the devices/equipment. Should this be necessary, it can be done with white spirit. After use, clean spray can valves by spraying inverted.
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
www.dowcorning.com
MOLYKOTE Metal Protector Plus Wax solution 2 Ref. no. 71-0151C-01 25/01/2002 DC 3638
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 0-2002 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
x Perfluoro polyether x Fluorinated polymer x Corrosion inhibitor
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Parameter Appearance JIS K 2220 Penetration (worked 60 times) Service temperature range NLGI class MIL-S-8660 MIL-S-8660 MIL-S-8660 ASTM D2596 ASTM D2266 JIS K 2220 Density Bleed (200C 24 hours) Evaporation (200C 24 hours) Evaporation (200C 1000 hours) Four ball weld load (1500rpm/1minute) Four ball wear scar (1200rpm, 392N, 1 hour) Low temperature torque test (-20C) Starting torque Running torque JIS K 2220 Low temperature torque test (-40C) Starting torque Running torque DIN 51 802 Emcor corrosion test Base oil vapor pressure 20C
* JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials. MIL: Military Specification and Standards. DIN: Deutsches Industrie Norm.
Unit
Value White
280 -20 to 250 2 2.0 5.0 1.0 3.0 >4900 1.3 54 28 Not measurable Not measurable 0 to 1 2x10-6
Pa
HOW TO USE
Clean points of contact. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
PACKAGING
This product is available in 100g plastic cans and 750g collapsible cartridges.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HANDLING PRECAUTIONS
Although MOLYKOTE HP-870 Grease is extremely chemically stable, it gradually begins to break down at temperatures in excess of 250C releasing a toxic gasses; be sure that this product is only used in an
environment with adequate ventilation.
Do not smoke cigarettes if they have been in contact with this product. Be sure to wash your hands thoroughly after working with this product. Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels
for safe use, physical and health hazard
Website Guide
For more information on our company and how to contact us, visit our website, www.molykote.com We help you invent the future."
21/02/2007 DC 4422
We help you invent the future. is a trademark of Dow Corning Corporation. MOLYKOTE and DOW CORNING are registered trademarks of Dow Corning Corporation. 2002, 2003 Dow Corning Corporation. All rights reserved.
Product Information
" Compatible with most rubber and plastics " Excellent stability at high temperatures " Superior resistance to chemicals and solvents " Minimal deterioration due to oxidation, appropriate for long-term lubrication " Low vapor pressure (base oil)
COMPOSITION
" Perfluoro polyether " Fluorinated polymer
" MOLYKOTE HP-300 Grease can be used broadly under harsh conditions such as low or high temperatures, corrosive, solvent, liquefied natural gasses, high vacuum, etc. " Clean room equipment and semiconductor manufacturing equipment where the volatization of the lubricating material is undesirable.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* JIS K 2220 Parameter Appearance Penetration (worked 60 times) NLGI class Service temperature range Density MIL-S-8660 MIL-S-8660 MIL-S-8660 ASTM D2596 ASTM D2266 JIS K 2220 Bleed (200C 24 hours) Evaporation (200C 24 hours) Evaporation (200C 1000 hours) Four ball weld load (1500rpm/1minute) Four ball wear scar (1200rpm, 392N, 1 hour) Low temperature torque test (-20C) Starting torque Running torque JIS K 2220 Low temperature torque test (-40C) Starting torque Running torque Base oil vapor pressure 20C
* JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials. MIL: Military Specification and Standards.
Value White 280 2 -65 to 250 2.0 8.0 0.2 1.0 3330 1.1 4.1 1.8 11 3.6 4x10-10
HOW TO USE
Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONS
Although MOLYKOTE HP-300 Grease is highly chemically stable, at temperatures in excess of 250C the material will gradually decompose and release toxic gasses; be sure to have adequate ventilation if you expect the material to decompose. Do not smoke cigarettes that are contaminated with this product. Be sure to wash hands thoroughly after use. Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.molykote.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers' tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
When stored, unopened in a cool, dark place this product, has a usable life of 36 months from the date of production.
PACKAGING
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Website Guide
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
For more information on our company and how to contact us, visit our website, www.molykote.com We help you invent the future."
22/12/2003 16608
We help you invent the future. is a trademark of Dow Corning Corporation. MOLYKOTE and DOW CORNING are registered trademarks of Dow Corning Corporation. 2002, 2003 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" Particularly suitable for long-term lubrication by virtue of its extremely low tendency towards oxidation " High drop point >250C (482F); consequently reduced risk of melting and run-out from lubrication point " Wide service temperature range, -40C to +200C (-40F to +392F); for short periods, up to 230C (446F) " High resistance to water and water washout " Resistant to mineral oil, fuels and many chemicals
c d
" Lubricating grease for metal/metal combinations with slow to medium-fast movements and medium loads over a wide temperature range.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, density, viscosity DIN 51 818 ISO 2137 ISO 2811 DIN 51 562 NLGI consistency class Worked penetration Density at 20C (68F) Base oil viscosity at 25C (77F) Temperature Service temperature C F ISO 2176 Drop point C F ASTM-D147880 Low temperature torque test at -30C (-22F) Initial break-away torque Torque after 20 minutes running time ASTM-D147880 Low temperature torque test at -40C (-40F) Initial break-away torque Torque after 20 minutes running time Load-carrying capacity Four-ball tester (VKA) DIN 51 350 pt.4 Weld load Oil separation DIN 51 817 Standard test % 0.3 * ASTM: American Society for Testing and Materials. ISO: International Standardisation Organisation. DIN: Deutsche Industrie Norm. N 3400 Nm Nm 856x10-3 56x10-3 Nm Nm 118x10-3 41x10-3 -40 to +200 (+230 for short periods) -40 to +392 (+446 for short periods) >250 >482 mm/10 g/ml mm /s
2
Unit
COMPOSITION
" Fluorosilicone oil " Organic thickener
Clean bearing surfaces. Apply grease in the normal way using a brush, grease gun or automatic lubricating system.
MOLYKOTE FS 1292 Grease can be used in centralised lubrication systems. Do not mix with other greases.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 0-2002 Dow Corning Corporation. All rights reserved.
Information About MOLYKOTE 3451 Chemical Resistant Bearing Grease and MOLYKOTE 3452 Chemical Resistant Valve Lubricant
Bearing tests show MOLYKOTE 3451 Chemical Resistant Bearing Grease has good life at varying high loads and speeds.
USES MOLYKOTE 3451 Chemical Resistant Bearing Grease MOLYKOTE 3451 Chemical Resistant
Bearing Grease is an exceptional antifriction bearing lubricant especially designed for applications that experience a wide range of temperatures, loads and speeds. It is particularly useful in bearings exposed to harsh chemicals or solvents, bearings used at high speeds and bearings subjected to heavy loads. MOLYKOTE 3451 Bearing Grease can be used on: Chemical mixers Needle bearings in circuit breakers Pumps Processing equipment Fuel- and solvent-handling equipment Sealed-for-life bearings that must operate at high speeds, heavy loads, and high and low temperatures
Type
Fluorosilicone greases
Special Properties
Chemical resistance; good loadcarrying ability, effective in high temperatures
These greases lubricate over a wide temperature range. MOLYKOTE 3451 Chemical Resistant Bearing Grease has good life at temperatures from -40 to 450F (-40 to 232C);MOLYKOTE 3452 Chemical Resistant Valve Lubricant has a serviceable temperature range from -20 to 450F (-29 to 232C). Both MOLYKOTE 3451 Chemical Resistant Bearing Grease and MOLYKOTE 3452 Chemical Resistant Valve Lubricant resist deterioration by solvents, acids, chlorides and other severe chemicals as well as low-pressure steam and condensate. (See Table I.)
Valves protected by MOLYKOTE 3452 Chemical Resistant Valve Lubricant show no evidence of corrosion or degradation of lubricant.
BL17877-1
TYPICAL PROPERTIES These values are not intended for use in preparing specifications.
.................................................................................................... .................................................................................................... .................................................................................................... .................................................................................................... NLGI Consistency ...................................................................... Color ........................................................................................... Thickener ................................................................................... ASTM D 217 Penetration, worked, 60 strokes ................................................ Viscosity of fluorosilicone oil at 100F (38C), SUS ................ Service Temperature Range1, F (C) ...................................... Max. Dn Value2 .......................................................................... Specific Gravity at 77F (25C) ................................................. Fed Std 791 Bleed, at 400F (204C), percent .............................................. ASTM 2265 Evaporation, at 400F (204C), percent ................................... Dropping Point, F (C) ............................................................ ASTM D 1264 Water Washout, at 175F (80C), percent ................................ Fed Std 791a3 4-Ball Weld Load,Kg ................................................................... ASTM D 1478 Low-Temperature Torque starting, g-cm at -40F (-40C) ............................................... running, g-cm after 1 hr at -40F (-40C) .............................
1
Molykote 3451 Chemical Resistant Bearing Grease #2 White Fluorinated polymers 275 2295 -40 to 450 (-40 to 232) 200,000 1.44 2.7 3.7 >536 (>280) 0.3 400 2315 1960
Molykote 3452 Chemical Resistant Valve Lubricant #3 White Fluorinated polymers 270 46,000 -20 to 450 (-31 to 232) 75,000 1.50 1.2 1.1 >570 (>300) 0.1 400
Estimated service temperature range based on product formulation and laboratory testing. Actual service temperature range is dependent on other factors including the specific application environment. 2 Dn value = shaft size of bearing in mm x rpm; based on estimate. 3 Method 6503.
Specification Writers: Please obtain a copy of the Dow Corning Sales Specification for this product and use it as a basis for your specifications. It may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (989) 496-6000.
Table I: Chemical Resistance of MOLYKOTE 3451 Chemical Resistant Bearing Grease and MOLYKOTE 3452 Chemical Resistant Valve Lubricant
.......................................................................................................... .......................................................................................................... .......................................................................................................... After 24 hours at 77F (25C)1 ................................................................................................ Diesel ................................................................................................ Kerosene .......................................................................................... Silicone Fluid ................................................................................... Toluene ............................................................................................ Hexane ............................................................................................. Xylene .............................................................................................. Isopropanol ...................................................................................... Methanol .......................................................................................... VM&P Naphtha ...............................................................................
1 2
MOLYKOTE
3451 Chemical Resistant Bearing Grease Good3 Good Fair Good Fair Good Good Good Good
MOLYKOTE
3452 Chemical Resistant Valve Lubricant Good Good Good Good Fair Good Good Good Good Hydrocarbon Grease2 Poor Fair Poor Poor Poor Poor Fair Fair Poor
Test method Federal Standard 791C-6.2. A lithium-thickened petroleum grease. 3 Good no observable effect on grease [grease slightly soft; poor adhesion]; Fair adhesion.
Figure 1: Percent Volume Change of Various Rubbers in MOLYKOTE 3452 Chemical Resistant Valve Lubricant
MOLYKOTE 3452 Chemical Resistant Valve Lubricant MOLYKOTE 3452 Chemical Resistant
Valve Lubricant is an exceptional valve lubricant and sealant product particularly suited for applications where corrosive or aggressive chemicals are used. MOLYKOTE 3452 Valve Lubricant can be used on: Plug valves Mechanical seals and packings Slow-speed roller and journal bearings Moderate-speed ball bearings Instruments in high vacuum, at high temperatures and in corrosive atmospheres Rotary and reciprocating shaft seals Flexible ball joints
This product is neither tested nor represented as suitable for medical or pharmaceutical uses. HOW TO USE Application MOLYKOTE 3451 Chemical Resistant
Bearing Grease and MOLYKOTE 3452 Chemical Resistant Valve Lubricant can be applied using conventional methods of grease application brushing, grease gun or automatic applicators.
SHIPPING LIMITATIONS
None.
Unless Dow Corning provides you with a specific written warranty of fitness for a particular use, Dow Cornings sole warranty is that the product or products, as supplied, will meet Dow Cornings then current sales specifications. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR USE. Your exclusive remedy and Dow Cornings sole liability for breach of warranty is limited to refund of the purchase price or replacement of any product shown to be other than as warranted, and Dow Corning expressly disclaims any liability for incidental or consequential damages.
Dow Corning is a registered trademark of Dow Corning Corporation. 1994, 1998 Dow Corning Corporation. All rights reserved. Printed in USA
AGP3853A
Product Information
Specialty Lubricants
FEATURES
" Contains no lead or nickel " Suitable for long-term lubrication due to low oil evaporation and low tendency towards oxidation " Emergency running properties and reduction of wear by virtue of incorporated solid lubricants " No drop point: consequently no melting or run-out from lubrication point " Good water washout resistance
c d
High performance grease for metal/metal combinations involving slow to medium-fast movements and light to heavy loadings, particularly at high temperatures APPLICATIONS
" Suitable for lubrication points with light to heavy loadings and low to medium speeds, particularly those exposed to continuous high temperatures. " Used successfully on plain and roller bearings of conveyor installations in drying kilns, vulcanizing plants, heating installations, fans and electric motors.
TYPICAL PROPERTIES
COMPOSITION
" " " "
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, density, viscosity DIN 51 818 ISO 2137 ISO 2811 DIN 51 562 NLGI consistency class Worked penetration Density at 20C (68F) Base oil viscosity at 40C (104F)1 Temperature Service temperature C F ISO 2176 Drop point Initial break-away torque Torque after 20 minutes running time Four-ball tester (VKA) DIN 51 350 pt.4 Weld load DIN 51 350 pt.5 Wear scar under 800N load Almen-Wieland machine OK load Frictional force with OK load Corrosion protection DIN 51 802 SKF-Emcor method Degree of corrosion 0-1 N N 20000 3085 N mm 2200 1.3 C/F Nm Nm -30 to +160, +180 for short periods -22 to +320, +356 for short periods None 593x10-3 68x10-3 mm/10 g/ml mm2/s 2 265-295 0.86 260 Unit Result Black
PACKAGING
Clean points of contact. Apply in same way as lubricating greases, using brush, spatula, grease-gun or automatic lubricating device. Suitable for delivery by central lubricating system. Do not mix with other greases.
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
HANDLING PRECAUTIONS
LIMITATIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
www.dowcorning.com
MOLYKOTE FB 180 High Performance Grease 2 Ref. no. 71-0164C-01 25/01/2002 DC 2997
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" " " "
MOLYKOTE 41 Grease
c d
This is a silicone grease that can be used at temperatures higher than those of normal silicone greases APPLICATIONS
" Ideal for use in oven conveyers, kiln dollies, molten salt evacuation pumps, steam turbine regulator links, knife-edge power breakers, etc.
Does not melt, even at high temperatures Superior thermal stability Superior oxidation resistance Water resistant
COMPOSITION
" Silicone oil " Carbon black " Corrosion inhibitor
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Parameter Appearance Base oil viscosity at 25C JIS K 2220 Penetration (worked 60 times) NLGI class Service temperature range Density JIS K 2220 MIL S 8660 MIL S 8660 JIS K 2220 Drop point Bleed (150C/24 hours) Evaporation (150C/24 hours) Water washout (38C/1 hour) Maximum Dn value *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials. MIL: Military Specification and Standards. C g/cm C % % % N mm/ minute
3
Unit mm /s
2
Value Black 316 260 to 300 2 -20 to 290 1.1 None 4.0 1.0 0.5 1500 75,000
mm/10
HOW TO USE
Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device. Do not use on painted surfaces. Do not use on steel bearing under high loads.
HANDLING PRECAUTIONS
This product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling.
When stored, unopened in a cool, dark place this product, has a usable life of 36 months from the date of production.
PACKAGING
CAUTION
1. Data included in this document are average values, not specification values. Any applications for this product given in this document are merely examples. Perform thorough evaluations to confirm functionality, effectiveness, and safety before use. 2. No guarantees are made that the applications described in this document are free from infringements of any patent. 3. This product was developed for industrial use, and is not intended for use in medical equipment, pharmaceutical products, etc. 4. Be sure to read the material safety data sheet (MSDS) and container label for this product before use. 5. Contact Dow Corning Asia, Ltd., before reproducing any data from this document. WE HELP YOU INVENT THE FUTURE."
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 2002 Dow Corning Corporation. All rights reserved.
Product Information
High Performance Lubricants Molykote 33 Extreme Low Temperature Bearing Grease, Molykote 41 Extreme High Temperature Bearing Grease, Molykote 44 High Temperature Bearing Grease
FEATURES
x x x x
Resistance to oxidation, moisture and corrosive atmospheres Inertness Good shear stability Wide service temperature range: 33 Extreme Low Temperature Grease: -100 to 400F (-73 to 204C) 41 Extreme High Temperature Grease: 0 to 550F (-18 to 288C) 44 High Temperature Grease: -40 to 400F (-40 to 204C) Compatible with many plastics
Lubricants for antifriction bearings and plastic and rubber parts USES
All three Molykote Bearing Grease are used to lubricate ball bearings operating under light to moderate loads. These can be used for: Molykote 33 Extreme Low Temperature Bearing Grease Freezer cart casters and cold room conveyor equipment Utility disconnect switch contacts Plastic electric clock motors Maximum-demand meters, power-factor meters, watt-hour meters Windshield wiper motor gears Photographic, optical and surveying equipment Oscillographs, geophysical and light, low-torque instruments Starter clutch drives Molykote 41 Extreme High Temperature Bearing Grease Antifriction bearings of high-temperature equipment Oven conveyor bearings Wheel bearings of core oven carts Governor linkage of steam turbines Ball and socket connections of power insulators Molykote 44 High Temperature Bearing Grease Kiln preheater fans, oven fans, radiator cooling fans Textile slashers and driers Aircraft engine Conveyor systems These greases do not soften or affect most plastics and are used to lubricate plastic gears, bearings and cams, as well as metal and rubber parts. Because of low torque requirements, Molykote 33 Extreme Low Temperature Bearing Grease is especially effective in equipment that must start in extreme cold. Oxidation Resistance Molykote Bearing Greases are recommended for use in units that must remain operable when subjected not only to low and high operating temperatures, but also to severe weathering and oxidation.
COMPOSITION
x x
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Method Test
33 Light Color Thickner Base Oil DIN 51 562 ASTM D 217 Base Oil Viscosity @ 25C, mm2/s Penetration, worked 60 strokes, mm NLGI # DIN 51 350 pt4 4 ball weld load, N (kg) Max Dn Value (Bore Size in mm X rpm) Service Temperature2 Degrees C (F)
1
Results
33 Medium Off White Lithium Soap Silicone 100 280 2 1200 (122) 200,000 -73 to 204 (-100 to 400) 226 (439) 1 1.6 0.97 41 Grease Black Carbon Black Silicone 316 280 2 1500 (152) 75,000 -18 to 288 (0 to 550) >300 (>572) 4.8 3 2.6 1.14 44 Light Off White Lithium Soap Silicone 125 300 ~1 1100 (113) 350,000 -40 to 204 (-40 to 400) 220 (432) 2.5 2.4 1.05 44 Medium Off White Lithium Soap Silicone 125 280 2 1100 (113) 300,000 -40 to 204 (-40 to 400) 220 (432) 2 1.4 1.05
Off White Lithium Soap Silicone 100 320 1 1200 (122) 250,000 -73 to 204 (-100 to 400) 226 (439) 2
Oil Separation (Standard Test, 7 days at 40C) % 3.2 Specific Gravity @25C (77F) 0.97
ASTM D 1478-80
Low Temperature Torque @ -73C Initial Break-away Torque, Nm Torque after 20 minutes running time, Nm Low Temperature Torque @ -40C Initial Break-away Torque, Nm Torque after 20 minutes running time, Nm 225 x 10 -3 60 x 10
-3
130 x 10 -3 13 x 10 -3
164 x 10 -3 22 x 10 -3
336 x 10 -3 124 x 10 -3
DIN 51 808
Oxidation Resistance, pressure drop 100hr, 99C (210F) bar (psi) FAG Rolling Element Bearing Tester, FE9, 1500/6000-150, F50, Hrs
0.4 (5.80)
0.1 (1.45)
DIN 51 821-02-A
1 2
110
110
Maximum Dn values are approximations and will vary widely with temperature, load and bearing type. Estimated service temperature range based on product formulation and laboratory testing. Actual service temperature range is dependent on other factors including the specific application environment. 3 Values are at 392F (200C). Specification Writers: Please obtain copies of the Dow Corning Sales Specifications for these products and use them as a basis for your specifications. They may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (989) 496-6000.
Limitations of Typical Organic Greases -100F -20F Molykote 33 Extreme Low Temperature Grease Molykote 41 Extreme High Temperature Grease
May 4, 2006, Molykote DIC164544
260F
450F
550F
Molykote 33 Extreme Low Temperature Bearing Grease Molykote 41 Extreme High Temperature Bearing Grease Molykote 44 High Temperature Bearing Grease Ref. No. 10-814C-01
44 High Temperature
We help you invent the future is a trademark of Dow Corning Corporation. Molykote is a registered trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. Grease 2006 Dow Corning Corporation. All rights reserved.
DESCRIPTION
Molykote 33 Extreme Low Temperature Bearing Grease, Molykote 41 Extreme High Temperature Bearing Grease and Molykote 44 High Temperature Bearing Grease are silicone lubricating oils with thickeners added. Molykote 33 Extreme Low Temperature Bearing Grease and Molykote 44 High Temperature Bearing Grease are thickened with a special lithium soap; Molykote 41 Extreme High Temperature Bearing Grease is thickened with carbon black. Molykote 33 Extreme Low Temperature Bearing Grease and Molykote 44 High Temperature Bearing Grease are available in light and medium consistencies NLGI #1 and #2. Molykote 41 Extreme High Temperature Bearing Grease is available in a medium consistency NLGI #2.
combinations, especially where sliding friction is encountered. Molykote 41 Extreme High Temperature Bearing Grease Bearings operating at extremely high temperatures need to be frequently monitored to ensure that the grease has not dried out. If this occurs, more grease can be added, or the existing grease rejuvenated by adding Dow Corning 710 Fluid. These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
3.6-kg cans, 5-kg pails, 18-kg pails, 25-kg pails, and 180-kg drums.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
SHIPPING LIMITATIONS
None.
LISTINGS/ SPECIFICATIONS
Molykote 33 Extreme Low Temperature Bearing Grease is USDA listed for use as a lubricant where there is no possibility of food contact.
HOW TO USE
Conventional grease application methods brushing, grease gun or automatic application are suitable for use with these Molykote Bearing Greases. Laboratory tests and field reports indicate that heavy duty guns available from such manufacturers as Lincoln-St. Louis are preferred. Note: Extra care should be taken at all times to prevent dirt from contaminating the lubricant. These greases should be packed with a clean metal or ebonite spatula.
PACKAGING
Not all sizes available in all geographies. Molykote 33 Extreme Low Temperature Bearing Grease is supplied in 100-g tubes, 150-g tubes, 400-g cartridges, 1-kg cans, 3.6-kg cans, 18-kg pails, 25-kg pails, 55-kg drums, and 180 kg drums. Molykote 41 Extreme High Temperature Bearing Grease is supplied in 100-g tubes, 150-g tubes, 400-g cartridges, 1-kg cans, 3.6-kg cans, 5-kg pails, 18-kg pails, 25-kg pails, and 181.4-kg drums. Molykote 44 High Temperature Bearing Grease is supplied in 100-g tubes, 150-g tubes, 400-g cartridges,
LIMITATIONS
These greases should not be applied to surfaces that are to be painted. These greases should not be used with highly loaded ferrous metal bearing
Molykote 33 Extreme Low Temperature Bearing Grease Molykote 41 Extreme High Temperature Bearing Grease Molykote 44 High Temperature Bearing Grease Ref. No. 10-814C-01
We help you invent the future is a trademark of Dow Corning Corporation. Molykote is a registered trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2006 Dow Corning Corporation. All rights reserved.
Molykote 33 Extreme Low Temperature Bearing Grease Molykote 41 Extreme High Temperature Bearing Grease Molykote 44 High Temperature Bearing Grease Ref. No. 10-814C-01
We help you invent the future is a trademark of Dow Corning Corporation. Molykote is a registered trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2006 Dow Corning Corporation. All rights reserved.
P R O D U C T
I N F O R M A T I O N
Information About Molykote G-4500 Multi-Purpose Synthetic Grease and Molykote G-4700 Extreme Pressure Synthetic Grease
BENEFITS Both Molykote G-4500 Multi-Purpose Synthetic Grease and Molykote G-4700
Extreme Pressure Synthetic Grease: Are formulated to provide higher load carrying capacity, greater wear resistance and longer service life compared with conventional petroleum-based lubricants Are NLGI #2 greases Provide good compatibility with most industrial and engineering substrates including many plastic and rubber materials Excellent low temperature torque and water washout resistance Molykote G-4500 Multi-Purpose Synthetic Grease features: A unique formulation that includes polyalphaolefin (PAO) base oil, aluminum complex thickener and polytetrafluoroethylene (PTFE) as well as other fortifiers Meets FDA Regulation 21 CFR 1789.3570 as a lubricant with incidental food contact
Type
Synthetic lubricants
Physical Form
Greases, NLGI #2
Special Features
Multi-purpose capabilities; wide temperature operating range; broad compatibility
LIMITATIONS
These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
Primary Use
Long-term lubrication for assembly and maintenance
AUTHORIZATIONS
Molykote G-4500 Multi-Purpose Synthetic Grease complies with FDA Regulation 21 CFR 178.3570 as a lubricant with incidental food contact.
USES
Both greases can be used with rolling element and plain bearings, pivot pins, cams, guides, ways, drive screws, gears, splines and other machine elements.
Compatibility rating for elastomers is based on relative percent change in volume after 70 hours at 70C (158F). Compatibility rating for plastics is based on relative percent change in volume after 70 hours at 70C (158F). 2 Viton is a registered trademark of E.I. du Pont de Nemours Company.
TYPICAL PROPERTIES1 These values are not intended for use in preparing specifications. Molykote G-4500
Multi-Purpose Synthetic Grease ASTM D 445 Base Oil Viscosity, at 104F (40C), cSt .............................................................. at 212F (100C), cSt ............................................................ Thickener Type ......................................................................... Penetration at 77F (25C), mm/10 (W/60) ............................... Specific Gravity at 77F (25C) ................................................ Dropping Point, F (C), min .................................................... Bleed/Evaporation, 24 hours at 212F (100C) ......................... Low Temperature Torque at -40F (-40C), Nm ...................... Four Ball Wear, 40 kg, 1200 rpm, mm ....................................... Four Ball EP, Weld Load, kg, min .............................................. Timken OK Load, lb, min .......................................................... Temperature Range, estimated, F (C) ..................................... Dn, bearing ID (mm) rpm, estimated ...................................... 110 13.5 Aluminum Complex 265-295 0.84 520 (271) 3.1/0.4 0.9 0.50 315 40 -60 to 325 (-51 to 163) 325,000
Molykote G-4700
Extreme Pressure Synthetic Grease 150 20 Lithium Complex 265-295 0.87 545 (285) 2.5/0.2 1.1 0.32 400 60 -40 to 350 (-40 to 177) 350,000
ASTM D 217 ASTM D 2265 FTM 321.1 ASTM D 4693 ASTM D 2266 ASTM D 2596 ASTM D 2509
Specification Writers: Please obtain copies of the Dow Corning Sales Specifications for these products and use them as a basis for your specifications. They may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (989) 496-6000.
use shall not be taken as inducements to infringe any patent. Dow Cornings sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE
HOW TO USE
Apply using conventional grease application methods, i.e., clean brush, grease gun and manual or automated dispensing equipment.
SHIPPING LIMITATIONS
None.
PACKAGING
Molykote G-4500 Multi-Purpose Synthetic Grease and Molykote G-4700 Extreme Pressure Synthetic Grease is available in 3-oz (85-g) tubes, 14.1-oz (400-g) cartridges, 35.3-lb (16-kg) pails and 397-lb (180-kg) drums. Molykote G-4500 Multi-Purpose Synthetic Grease is also available in an 11 oz. aerosol can.
FUTURE. www.dowcorning.com
03/11/02 FPH29501
Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. 2002 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" Wide service temperature range " Compatible with many plastics and elastomers " Meets FDA Regulation 21 CFR 178.3570 and USDA H1 classifications for incidental food contact " Fully synthetic base oil " White color " Available in NLGI consistency classes 1 and 2
c d
MOLYKOTE G-4500/G-4501 Multi-purpose synthetic grease
White food grade synthetic greases APPLICATION
" General purpose light consistency white synthetic grease can be used in rolling element and plain bearings, pivot pins, cams, guides, ways, drive screws, gears, splines and other machine elements.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. ASTM* Property Consistency, Viscosity, Specific Gravity DIN 51 818 ASTM D217 ASTM D445 ASTM D445 ISO 2811 NLGI consistency class Penetration at 25C (77F) (W/60) Base oil viscosity at 40C (104F) Base oil viscosity at 100C (212F) Specific gravity at 25C (77F) Temperature Temperature range (approximate) ASTM D2265 Dropping point FD 791-32/2 FD 791-32/2 Oil bleed, 24 hours, 100C (212F) C F C F wt% Nm mm N kg Oil evaporation, 24 hours, 100C (212F) wt% -40 to 150 -40 to 150 -40 to 302 -40 to 302 >270 >518 3.1 0.4 0.9 0.5 >3,100 >18 325,000 >260 >500 4.7 0.5 0.7 0.5 >3,100 >18 325,000 cSt cSt g/ml 2 mm/10 265-295 100 14.4 0.84 1 310-340 100 14.4 0.83 Unit Value G-4500 G-4501
BENEFITS
" Formulated to provide higher load carrying capacity, greater wear resistance and longer service life compared to conventional petroleum-based lubricants " Provides good compatibility with most industrial and engineering substrates including many plastic and rubber materials " Excellent low temperature torque " Low consistency formulation of G-4501 allows use in automatic dispensing systems
COMPOSITION
" PAO base oil " Aluminum complex thickener " Fortified with polytetrafluoroethylene (PTFE)
ASTM D4693 Low-temperature torque at -40C (-40F) ASTM D2266 Four-ball wear, 40kg, 1200rpm ASTM D2596 Four-ball EP, weld load, minimum ASTM D2509 TIMKEN test, OK load Dn, bearing ID (mm)x(rpm), estimated * ASTM: American Society for Testing and Materials. ISO: International Standardisation Organisation. DIN: Deutsche Industrie Norm.
DESCRIPTION
MOLYKOTE G-4500/G-4501 Multi-purpose synthetic greases are high-performance greases that combine the benefits of wide operating temperature range and broad compatibility with varied materials. Both are thickened with an aluminum complex and contain white solid lubricants. They can be used to lubricate bearings, gears, chains and sliding mechanisms in food processing machinery.
When stored at or below 40C (104F) in the original unopened containers, these products have a usable life of 60 months from the date of production.
PACKAGING
HOW TO USE
These products are available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning Sales Office or Dow Corning Distributor.
Apply using conventional grease application methods, i.e., clean brush, grease gun and manual or automated dispensing equipment.
LIMITATIONS
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers' tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
www.dowcorning.com www.molykote.com
MOLYKOTE G-4500/G-4501 Multi-purpose synthetic grease 2 Ref. no. 80-3150-01 02/10/2002 DC 4422
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. Dow Corning and MOLYKOTE are registered trademarks of Dow Corning Corporation. 2002 Dow Corning Corporation. All rights reserved.
Dow Corning
Bearing Grease
The Number-One Choice When Clean Really Counts in Grease.
Dow Corning White EP Bearing Grease1 is a high-performance grease with a mineral oil base. It is thickened with an aluminum complex and contains white solid lubricants. Designed as a clean, food-grade alternative to common black greases, Dow Corning White EP Bearing Grease offers high performance and high-load capability.
AV01269
White EP
AV01722
Features
Clean, white appearance High-performance capability Excellent lubricating properties Good resistance to water washout High load-carrying capacity Meets FDA Regulation 21 CFR 178.3570 and USDA H1 classifications for incidental food contact
Applications
Dow Corning White EP Bearing Grease can be used to lubricate bearings, gears, chains and sliding mechanisms in process machinery, in canneries, dairies, beverage plants, meat processing plants and pharmaceutical plants. It is an excellent choice for operations where products must be manufactured, packaged or transported without black material contamination. Dow Corning White EP Bearing Grease is appropriate for low-to-high loads, moderate-to-high temperatures and moderate-to-high speed applications.
How To Use
Dow Corning White EP Bearing Grease can be applied by hand packing, handoperated grease guns, automatic greasing equipment and central lubricating systems. When lubricating antifriction bearings, follow the bearing manufacturers instructions. When lubricating plain bearings, the new grease should be pumped in until all of the old grease has been expelled.
Typical Properties
These values are not intended for use in preparing specifications. Color ................................................................. White Base Oil ..................................................... Mineral oil Base Oil Viscosity/SUS at 100F (38C) ................................................ 490 Solid Lubricant Content, percent ................................................................. 5 Thickener .................................. Aluminum complex ASTM D 217 Penetration, worked 60 ...................................... 280 Consistency, NLGI.................................................. #2 Operating Temperature Range1, F (C) ..................... 0 to 300 (-17 to 149) Fed Std 791 Bleed at 212F (100C), percent .......................... 1.4 Fed Std 791 Evaporation at 212F (100C), percent ............... 1.4 ASTM D 2266 4 Ball Wear Scar, 1200 rpm, 1 hour at 167F (75C), mm ........................... 0.64 ASTM D 2596 4 Ball Weld Load, N ........................................... 1300 Estimated Maximum Dn Value .................... 200,000 ASTM D 2265 Dropping Point, F (C) ............................ 518 (270)
1 Estimated service temperature range based on product formulation and laboratory testing. Actual service temperature range is dependent on other factors including the specific application environment.
Use Limitations
Dow Corning White EP Bearing Grease may not be appropriate for lubrication under exceptionally severe operating conditions, or where chemical influences or temperature extremes are likely. This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Storage/Useable Life
When stored at or below 90F (32C), Dow Corning White EP Bearing Grease has a useable life of 60 months from date of manufacture by Dow Corning.
Specification Writers: Please obtain a copy of the Dow Corning Sales Specification for this product and use it as a basis for your specifications. It may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (517) 496-6000.
Available Packaging
Dow Corning White EP Bearing Grease is available in 0.525-oz (15-g) pillow packs, 14.1-oz (400-g) cartridges, 35-lb (15.9-kg) pails, and 120- and 400-lb (54.4- and 181.4-kg) drums.
SAFE HANDLING INFORMATION PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE FROM YOUR DOW CORNING REPRESENTATIVE, OR DISTRIBUTOR, OR BY WRITING TO DOW CORNING CUSTOMER SERVICE, OR BY CALLING (517) 496-6000. LIMITED WARRANTY PLEASE READ CAREFULLY Dow Corning believes that the information in this publication is an accurate description of the typical characteristics and/or uses of the product or products, but it is your responsibility to thoroughly test the product in your specific application to determine its performance, efficacy and safety. Suggestions of uses should not be taken as inducements to infringe any particular patent. Unless Dow Corning provides you with a specific written warranty of fitness for a particular use, Dow Cornings sole warranty is that the product or products will meet Dow Cornings then current sales specifications. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR USE. Your exclusive remedy and Dow Cornings sole liability for breach of warranty is limited to refund of the purchase price or replacement of any product shown to be other than as warranted, and Dow Corning expressly disclaims any liability for incidental or consequential damages.
Dow Corning is a registered trademark of Dow Corning Corporation. 1994, 1998 Dow Corning Corporation. All rights reserved. Printed in USA
AGP3858
Product Information
White lubricating grease for metal/metal combinations with slow to fast movements and medium loads APPLICATION
Used successfully for bearings in machinery used in the food and pharmaceutical industries, in textile and paper making machines, domestic appliances and mechanical precision instruments.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard Test Color Unit Result White 2 mm/10 265-295 g/ml 0.9 mm/s 125 C C -30 to 110 +130 for short periods >=180
COMPOSITION
Mineral oil Lithium soap Solid lubricants Adhesion improver
NLGI consistency class Worked penetration Density at 20C Base oil viscosity at 40C
Temperature
Service temperature ISO 2176 ASTMD-1478-80 Drop point Low temperature torque test at -20C Initial break-away torque Torque after 20 minutes running time
Nm Nm
125x10 44x10
Speed
DN value mm/min 450000
Corrosion protection
DIN 51 802 SKF-Emcor method Degree of corrosion 0-1 % % 3.3 0.5
1. DN values are calculated approximations and will vary widely with temperature, load and bearing type.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
05/01/1998 DC 2910
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
x Modern polyurea thickener x Mineral base oil x Corrosion inhibitor
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Standard Test Unit Value Color Green Base oil type Thickener type Mineral oil Polyurea
Consistency, Viscosity Consistency Worked Penetration Base oil viscosity @ 40C Temperature Service temperature range (est.)
2 265 - 295 125 -30 to +170 -20 to +340 > 260 (> 525)
ASTM D2265
Dropping point Oil Separation/Evaporation Oil separation (24 hrs/ 100C) Evaporation loss (24 hrs/ 100C)
FTMS 791C-321.2
Mass-% Mass-%
2.3 0.1
Load Carrying Capacity, Wear Protection, Speed ASTM D 2596 ASTM D 2266 ASTM D 1743 Four Ball Tester Weld load kg Wear scar under (40 kg; 75qC; 1 hr) mm Dn value (DR x rpm; estimated) Corrosion prevention 315 0.60 400 M 1, 1, 1 Pass
ASTM: American Society for Testing and Materials FTMS: Federal Test Methods
DESCRIPTION
Molykote G-0010 is a mineral oil-based grease thickened by a di-urea system. Molykote G-0010 offers excellent low temperature properties and load-carrying characteristics. Molykote G-0010 provides premium rust prevention and due to its polyurea thickener superior shear and oxidation stability.
PACKAGING
This product is available in 400g cartridges, 16kg pails, and 180kg drums.
HOW TO USE
Apply using conventional grease application methods, i.e., clean brush, grease gun and manual or automated dispensing equipment.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. ~2003 Dow Corning Corporation. All rights reserved.
Product Information
Lubricating grease for metal/metal combinations with slow to medium-fast movements especially with high loads APPLICATIONS
Used successfully for bearings, spline profiles and clutches in highly stressed motor vehicles, tractors, cranes, earth-moving machines, conveyor belts and forklift trucks. Also where there is a risk of fretting corrosion, groove formation (Brinell effect) or moisture.
COMPOSITION
Mineral oil Lithium soap Solid lubricants EP additive Corrosion inhibitor Adhesion improver
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Black 2 265-295 0.9 265 -25 to +110, short period +130 >=175
Temperature
Service temperature ISO 2176 ASTMD-1478-80 Drop point Low temperature torque test at -20C Initial break-away torque Torque after 20 minutes running time Four-ball tester DIN 51 350 T.4 Weld load DIN 51 350 T.5 Wear scar under 800N load Almen-Wieland machine OK load Frictional force with OK load DIN 51 82102A FAG roller element bearing tester FE 9, 4500/6000-110, F}
Nm Nm
420x10 35x10
Speed
DN value mm/min 250000 0.3
Resistance
DIN 51 808 Oxidation resistance, pressure drop 100h, bar 99C
Corrosion protection
DIN 51 802 SKF-Emcor method Degree of corrosion 0-1
Oil separation
Standard test 1. Calculated viscosity value of base oil mixture. * ASTM: American Society for Testing and Materials ISO: International Standardisation Organisation DIN: Deutsche Industrie Norm
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
30/11/1998 DC 2943
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
Synthetic grease handles high speed, high load, high temperature combinations APPLICATIONS
Advantageous in applications that experience high temperatures and extreme pressure or high speed, such as ball bearings of electrical motors, fans, calenders, presses, metal working machines, generators, utility switch contacts, spindles, dryers or other applications
COMPOSITION
Polyolester grease with lithium complex thickener NLGI #2 Grease
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Method Test Unit Result Color Beige Oil Base Ester Base Oil Viscosity, at 38C (100F) SUS 200 Thickener Lithium complex Specific Gravity 1.01 Penetration, worked 60 mm/10 270 Service Temperature Range, estimated C (F) -45 to 182 (-50 to 360) Dropping Point C (F) >300 (>572) Water Washout percent 2 Oil Separation, 24 hr at 150C (302F) percent 2.2 Four-Ball Test, Weld Load kg 265 Four-Ball Test, Wear Scar, 1 hour at 75C (167F), 400 N mm 0.87 Dn Value (shaft size of bearing in mm x rpm), estimated 550,000 Almen-Wieland Machine OK Load N 20,000 Low Temperature Torque Test -20C (-4F) Nm 207 x 10-3 -50C (-58F) Nm 530 x 10-3 Low Temperature Torque Test, after 20 minute run -20C (-4F) Nm 130 x 10-3 -50C (-58F) Nm 130 x 10-3 FAG Bearing Test, angular contact thrust ball bearings 160C (320F), 1500 N, 6000 rpm hours 662 Corrosion Protection, SKF Emcor rating 1-2
ASTM D 217 ASTM D 566 ASTM D 1264 Fed Std 791C ASTM D 2596 ASTM D 2266
ASTM D 1478
ASTM D 1478
DIN 51802
1
Dn values are calculated approximations and will vary widely with temperature, load and bearing type.
DESCRIPTION
Molykote BG 20 High Performance Synthetic Grease is a synthetic complex grease with outstanding properties including a wide temperature range estimated at -45 to 182C (-50 to 360F) and a high load-carrying
capacity. It combines the most important properties of silicone grease (wide temperature range) and solid lubricantcontaining organic greases (high loadcarrying capacity) in an ester-based grease.
HOW TO USE
Apply Molykote BG 20 High Performance Synthetic Grease like any other grease. Follow instructions of bearing manufacturers. For optimum performance, Molykote BG 20 High Performance Synthetic Grease should not be mixed with other greases.
to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers tests to ensure that Dow Cornings products are safe, effective, and fully satisfactory for the intended end use. Dow Cornings sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE FROM YOUR DOW CORNING REPRESENTATIVE, OR DISTRIBUTOR, OR BY CALLING YOUR GLOBAL DOW CORNING CONNECTION.
PACKAGING
Molykote BG 20 High Performance Synthetic Grease is supplied in tubes, cartridges, and pails.
LIMITATIONS
This product is neither tested nor re resented as suitable for medical or ph rmaceutical uses.
SHIPPING LIMITATIONS
None.
WARRANTY INFORMATION
The information contained herein is offered in good faith and is believed
AGP4934
Dow Corning is a registered trademark of Dow Corning Corporation. 1992, 1998, 2000 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" Superior load carrying capability " Extended time possible between applications " Good oxidation resistance " Can provide lubrication under conditions where it is difficult to create oil film " Reduces wear " Superior water resistance " Superior corrosion resistance " Prevents fretting corrosion
c d
Premium lithium soap grease including solid lubricants with excellent lubricating capabilities for metal-on-metal friction under heavy loads at slow to fast speeds APPLICATIONS
" Ideally suited for roller bearings, slide bearings, guides, roller guides, ball joints, splines, small low-speed gears, and as an automotive chassis grease.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* JIS K 2220 JIS K 2220 JIS K 2220 JIS K 2220 JIS K 2220 JIS K 2220 Parameter Appearance Penetration (worked 60 times) NLGI class Drop point Service temperature range1 Bleed (100C 24 hours) Evaporation (99C 22 hours) Oxidation resistance (99C 100 hours) Water washout (38C/1 hour) Shell four ball test OK load Wear scar (1 hour, 800N) DIN 51821-02-A FAG bearing test, type FE9 (6000rpm, 130C, 4500N) DN value Corrosion resistance test ASTM D1743 Humidity corrosion SKF Emcor test 1. Up to 150C for short periods of time. *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials. DIN:Deutsches Industrie Norm. 1 (None) 0 (None) hours mm/min 40 450,000 C C % % MPa % N mm mm/10 Unit Value Black 265 to 295 2 185 -30 to 130 2.0 0.2 0.03 1.0 3150 1.2
COMPOSITION
" " " " "
HOW TO USE
Clean points of contact. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device. Can also be used in a centralized lubrication system.
PACKAGING
This product is available in 1kg cans (10 cans/case) and 16kg pails. CAUTION 1. Data included in this document are average values, not specification values. Any applications for this product given in this document are merely examples. Perform thorough evaluations to confirm functionality, effectiveness, and safety before use. 2. No guarantees are made that the applications described in this document are free from infringements of any patent. 3. This product was developed for industrial use, and is not intended for use in medical equipment, pharmaceutical products, etc. 4. Be sure to read the material safety data sheet (MSDS) and container label for this product before use. 5. Contact Dow Corning Asia, Ltd., before reproducing any data from this document. WE HELP YOU INVENT THE FUTURE."
HANDLING PRECAUTIONS
This product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling.
When stored, unopened in a cool, dark place this product, has a usable life of 60 months from the date of production.
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 2002 Dow Corning Corporation. All rights reserved.
Product Information
Release agent and lubricant for many food and industrial applications APPLICATIONS
For food and beverage industry processing: Reduces build-up on heat seal bars, resulting in increased heat transmission and sealing speed; reduced package discoloration; reduced cleaning time Releases evaporated milk and powdered milk from evaporator and preheater tubes Reduces adhesion of residues on heating coils and cooking kettles Lubricates sliding doors on display cases, refrigerator and freezer door gaskets Helps prevent seizing and jam-ups of conveyor guide rails and scrambler tables Facilitates the release of frozen vegetables and fruits from tray and freezer filling spouts Reduces adhesion of dried foods (dates, tea cubes, etc.) to drying trays and large cheese wheels to storage shelves Hastens the removal of dried food from stove burners and ovens; helps prevent adhesion of grease; makes cleaning stainless steel fixtures and counter tops easier Helps prevent glasses from sticking to cooling cones of glass frosting equipment Helps sugar release from processing and packaging equipment such as guides, dispensing chutes, table tops, and drying trays In high-speed rotary letterpress printing: Increases metal release from tail sheets Allows saw blades, saw tables, and storage trays to work more smoothly Reduces sticking of conveyors, pulleys, and valves In the bindery industry: Reduces build-up on glue pots and paste jars Makes tables and cutter surfaces slippery, so paper magazines, books, and bundled newspapers can be handled easier continued on next page
COMPOSITION
Heat-stable silicone compound
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Test Color Drying time Flash Point (Bulk) Density (Bulk), at 25C (77F) Unit minutes C (F) g/mL Result Clear Approx. 3 42 (108) 0.75
For flexography applications: Helps prevent ink from creeping onto idle rollers used in printing gift wrap, multi-wall bags, and similar applications In addition to specific industry-related uses, Dow Corning 316 Silicone Release Spray also: Helps prevent glue from adhering to walls of containers; makes it easier to remove dried glue from equipment Lubricates dispensing valves, package and coil chutes of automatic vending machines Promotes removal of hosiery from boarding forms Makes ironing easier by reducing friction on hand irons and pressing equipment Provides for smooth, easy cutting and reduces binding when applied to the cutting edges of tools; reduces clogging of saw teeth when sawing gummy woods or nonferrous metals Provides for smoother, faster materials handling on chutes, tables, and rollers
problems, it can be used in many industries. The silicone film formed by Dow Corning 316 Silicone Release Spray resists breakdown due to oxidation, which can leave carbonaceous residues or gummy surfaces. Once dried, it has low volatility at temperatures up to 199C (390F).
Freshly cleaned heat-sealing units, such as irons and bars, should be broken in at full operating temperature for a short period after applying Dow Corning 316 Silicone Release Spray. After any excess has been wiped off, the unit is ready for use. NOTE: Because Dow Corning 316 Silicone Release Spray has such a wide range of uses, securing or including complete information on those uses, such as reapplication schedules and amount to use, is impractical. For this reason, the suitability of Dow Corning 316 Silicone Release Spray should always be tested before it is adopted for regular use.
HOW TO USE
Dow Corning 316 Silicone Release Spray should be applied to clean surfaces. Clean off any surface residue with a fine emery cloth or scouring powder until the surface is shiny; then wipe with a clean cloth moistened with solvent to remove dirt and abrasive particles. Methods of application vary, depending upon the size, accessibility, and complexity of the unit to be processed or packaged. Usually, Dow Corning 316 Silicone Release Spray is sprayed in a light film. Approximately three minutes drying time should be allowed. Dow Corning 316 Silicone Release Spray can also be buffed onto metal surfaces with a hand buffer. Only a thin film is needed for effective release. This film should be restored as required.
Solubility
Dow Corning 316 Silicone Release Spray is insoluble in water, ethanol, acetone, glycol, and glycerin. It can be dispersed in naphtha. NOTE: When using any solvent, always provide adequate ventilation. Follow precautions on solvent container label.
DESCRIPTION
Dow Corning 316 Silicone Release Spray is a heat-stable, silicone antistick agent. Effective in solving a wide range of sticking or adhesion
CAUTION
Dow Corning 316 Silicone Release Spray should not be applied to surfaces that will later be painted, since it may interfere with the adhesion of the paint.
FDA/USDA STATUS
Dow Corning 316 Silicone Release Spray complies with FDA 21 CFR 175.300 covering resinous and polymeric coatings, subject to end user compliance with applicable total extractives limitations. It is also acceptable for use in federally inspected meat and poultry plants (previously designated by USDA H-1 status).
conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers tests to ensure that Dow Cornings products are safe, effective, and fully satisfactory for the intended end use. Dow Cornings sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
PACKAGING
Dow Corning 316 Silicone Release Spray is supplied in 284-g (10-oz) aerosol cans, 454-g (16-oz) pump spray containers, and 14.1-kg (5-gal) pails.
HANDLING PRECAUTIONS
This product contains a flammable solvent. Do not spray in a confined space where the possibility of spark ignition exists. This or similar situations could result in a flammability hazard. PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE FROM YOUR DOW CORNING REPRESENTATIVE, OR DISTRIBUTOR, OR BY CALLING YOUR GLOBAL DOW CORNING CONNECTION.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
SHIPPING LIMITATIONS
DOT Classification: Dow Corning 316 Silicone Release Combustible liquid; Dow Corning 316 Silicone Release Spray Flammable gas.
WARRANTY INFORMATION
The information contained herein is offered in good faith and is believed to be accurate. However, because
AGP4934
Dow Corning is a registered trademark of Dow Corning Corporation. 1997, 2000 Dow Corning Corporation. All rights reserved.
Product Information
Dow Corning 7 Release Compound, Dow Corning 4 Electrical Insulating Compound and Dow Corning 111 Valve Lubricant & Sealant
Dimethyl silicone compounds for a variety of lubrication and protection applications USES
Dow Corning 7 Release Compound can be used in applications including: Mold release agent for foundry shell and core molds Break-in treatment for bladders on tire presses Rubber lubricant and preservative Release agent for adhesives and glues Airframe lubricant Cable-pulling lubricant to draw rubber-covered cable through conduit Release agent for plastic extruders and processing equipment Release agent for plastic film packaging machines Uses of Dow Corning 4 Electrical Insulating Compound include: Moisture-proof seal for aircraft, automotive and marine ignition systems and spark plug connections Waterproof electrical connections Electrical assemblies and terminals Seal and lubricant for cable connectors, battery terminals, rubber door seals and rubber and plastic O-rings Assembly lubricant for various metal-on-plastic and metal-on-rubber combinations Lubrication for control and pressure plug valves Dow Corning 111 Valve Lubricant & Sealant can be used in applications such as: Sealant for vacuum and pressure systems Sealant for outdoor equipment, including shipboard applications, subject to washing and harsh environments; meters; electrical service entrance and underground connections Damping medium for dash pots in electrical and electronic equipment Chemical barrier coating Antistick and sealant for transformer gaskets and equipment enclosures, which help prevent gaskets from sticking to metal and resist weathering and water washout Lubricant for rubber and plastic O-rings (see Use Limitations) Sealant for gaskets and seals Lubricant for water softener and faucet valves Valve stem lubricant for potable water Aircraft vacuum systems
FEATURES
Maintain serviceable consistency from -70 to 400F (-57 to 204C) Practically nonvolatile Odorless Resistant to a wide range of chemicals; generally resistant to mineral oils, vegetable oils, air, dilute acids, alkalines and most aqueous solutions; Dow Corning 111 Valve Lubricant & Sealant is quite resistant to a variety of organic and inorganic chemicals Moisture resistant Electrically insulating Excellent rubber lubrication Excellent release and sealing properties Resistant to oxidation Essentially nontoxic and nonmelting Show little tendency to dry out in service
COMPOSITION
Greaselike materials containing an inert amorphous silica filler in combination with selected polydimethyl silicone fluids
DESCRIPTION
Dimethyl silicone compounds come in three basic consistencies: Light Dow Corning 7 Release Compound Medium Dow Corning 4 Electrical Insulating Compound Heavy Dow Corning 111 Valve Lubricant & Sealant
silicone-treated surfaces. If contaminated by a silicone coating, parts can be wiped or washed with solvent or washed with detergent. To O-rings or other components made of silicone rubber because they can deteriorate the silicone rubber. These compounds will also slightly swell natural butyl rubbers. Any rubber should be tested for excessive swell or shrink. Because each application may vary in chemical composition, pressure, flow velocity, relubrication requirements and equipment design, the silicone compound should be tested before adopting for regular use. These compounds are not intended for use with liquid oxygen or other strong oxidizing chemicals and should not be used in applications requiring LOX compatibility. These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
LISTINGS/ SPECIFICATIONS
These compounds are permitted for food contact use under FDA Regulation 21 CFR 175.300, covering polymeric coatings applied as continuous film over a metal substrate. Additionally, these compounds are listed under NSF Standard 51 for use in food processing equipment and NSF Standard 61 for use in potable water applications. Dow Corning 4 Electrical Insulating Compound is designed to meet the requirements of SAE AS 8660.
HOW TO USE
For best results, clean and dry surfaces before application. Dow Corning silicone compounds can be applied by hand, by specially designed automated equipment, or by brushing or wiping. When using some high pressure dispensing equipment, separation and compaction can occur. Certain designs of grease guns may seize with silicone compounds; test prior to using. Where a thinner consistency is needed, the compound can be dispersed in a solvent and applied by brushing or spraying.1
SHIPPING LIMITATIONS
None.
PACKAGING
These Dow Corning silicone compounds are supplied in 5.3-oz (150g) tubes, 8-lb (3.6-kg) cans, 40-lb (18.1-kg) pails and 440-lb (199.6-kg) drums. Dow Corning 111 Valve Lubricant & Sealant is also available in 14.1-fl oz (400-g) cartridges.
USE LIMITATIONS
These specific Dow Corning compounds should not be applied: To any surface that will be painted or finished. Such coatings may not adhere to the
Follow solvent manufacturers recommended safe handling instructions and applicable federal, state and local regulations.
TYPICAL PROPERTIES
These values are not intended for use in preparing specifications. Method Test Unit Dow Corning 7 Relase Compound White, translucent #1 270 322 6.5 0.8 -40 to 400 (-40 to 204) None 1.0 Yes Result Dow Corning 4 Electrical Insulating Compound White, translucent #2 240 279 4.5 1.4 -70 to 400 (-57 to 204) None 1.0 Yes Dow Corning 111 Valve Lubricant & Sealant White, translucent #3 205 217 0.05 1.1 -40 to 400 (-40 to 204) None 1.0 Yes
Color
NLGI Penetration, worked 60 worked 100,000 CTM 0033A Bleed, 24 hr/392F (200C) CTM 0033A Evaporation, 24 hr/392F (200C) Service Temperature Range Melting Point Specific Gravity at 77F (25C) FDA Recognition, 21 CFR 175.300 Dielectric Constant, at 100 Hz at 100 kHz Dissipation Factor, at 100 Hz at 100 kHz Dielectric Strength, 50 mil gap Volume Resistivity at 73F (23C) Arc Resistance
CTM 0112
CTMs (Corporate Test Methods) correspond to standard ASTM tests in most instances. Copies of CTMs are available upon request.
Specification Writers: Please obtain copies of the Dow Corning Sales Specifications for these products and use them as a basis for your specifications. They may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (989) 496-6000.
FPH 29249
Dow Corning is a registered trademark of Dow Corning Corporation. 1996, 1999, 2002 Dow Corning Corporation. All rights reserved.
Product Information
Dow Corning 7 Release Compound, Dow Corning 4 Electrical Insulating Compound and Dow Corning 111 Valve Lubricant & Sealant
Dimethyl silicone compounds for a variety of lubrication and protection applications USES
Dow Corning 7 Release Compound can be used in applications including: Mold release agent for foundry shell and core molds Break-in treatment for bladders on tire presses Rubber lubricant and preservative Release agent for adhesives and glues Airframe lubricant Cable-pulling lubricant to draw rubber-covered cable through conduit Release agent for plastic extruders and processing equipment Release agent for plastic film packaging machines Uses of Dow Corning 4 Electrical Insulating Compound include: Moisture-proof seal for aircraft, automotive and marine ignition systems and spark plug connections Waterproof electrical connections Electrical assemblies and terminals Seal and lubricant for cable connectors, battery terminals, rubber door seals and rubber and plastic O-rings Assembly lubricant for various metal-on-plastic and metal-on-rubber combinations Lubrication for control and pressure plug valves Dow Corning 111 Valve Lubricant & Sealant can be used in applications such as: Sealant for vacuum and pressure systems Sealant for outdoor equipment, including shipboard applications, subject to washing and harsh environments; meters; electrical service entrance and underground connections Damping medium for dash pots in electrical and electronic equipment Chemical barrier coating Antistick and sealant for transformer gaskets and equipment enclosures, which help prevent gaskets from sticking to metal and resist weathering and water washout Lubricant for rubber and plastic O-rings (see Use Limitations) Sealant for gaskets and seals Lubricant for water softener and faucet valves Valve stem lubricant for potable water Aircraft vacuum systems
FEATURES
Maintain serviceable consistency from -70 to 400F (-57 to 204C) Practically nonvolatile Odorless Resistant to a wide range of chemicals; generally resistant to mineral oils, vegetable oils, air, dilute acids, alkalines and most aqueous solutions; Dow Corning 111 Valve Lubricant & Sealant is quite resistant to a variety of organic and inorganic chemicals Moisture resistant Electrically insulating Excellent rubber lubrication Excellent release and sealing properties Resistant to oxidation Essentially nontoxic and nonmelting Show little tendency to dry out in service
COMPOSITION
Greaselike materials containing an inert amorphous silica filler in combination with selected polydimethyl silicone fluids
DESCRIPTION
Dimethyl silicone compounds come in three basic consistencies: Light Dow Corning 7 Release Compound Medium Dow Corning 4 Electrical Insulating Compound Heavy Dow Corning 111 Valve Lubricant & Sealant
silicone-treated surfaces. If contaminated by a silicone coating, parts can be wiped or washed with solvent or washed with detergent. To O-rings or other components made of silicone rubber because they can deteriorate the silicone rubber. These compounds will also slightly swell natural butyl rubbers. Any rubber should be tested for excessive swell or shrink. Because each application may vary in chemical composition, pressure, flow velocity, relubrication requirements and equipment design, the silicone compound should be tested before adopting for regular use. These compounds are not intended for use with liquid oxygen or other strong oxidizing chemicals and should not be used in applications requiring LOX compatibility. These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
LISTINGS/ SPECIFICATIONS
These compounds are permitted for food contact use under FDA Regulation 21 CFR 175.300, covering polymeric coatings applied as continuous film over a metal substrate. Additionally, these compounds are listed under NSF Standard 51 for use in food processing equipment and NSF Standard 61 for use in potable water applications. Dow Corning 4 Electrical Insulating Compound is designed to meet the requirements of SAE AS 8660.
HOW TO USE
For best results, clean and dry surfaces before application. Dow Corning silicone compounds can be applied by hand, by specially designed automated equipment, or by brushing or wiping. When using some high pressure dispensing equipment, separation and compaction can occur. Certain designs of grease guns may seize with silicone compounds; test prior to using. Where a thinner consistency is needed, the compound can be dispersed in a solvent and applied by brushing or spraying.1
SHIPPING LIMITATIONS
None.
PACKAGING
These Dow Corning silicone compounds are supplied in 5.3-oz (150g) tubes, 8-lb (3.6-kg) cans, 40-lb (18.1-kg) pails and 440-lb (199.6-kg) drums. Dow Corning 111 Valve Lubricant & Sealant is also available in 14.1-fl oz (400-g) cartridges.
USE LIMITATIONS
These specific Dow Corning compounds should not be applied: To any surface that will be painted or finished. Such coatings may not adhere to the
Follow solvent manufacturers recommended safe handling instructions and applicable federal, state and local regulations.
TYPICAL PROPERTIES
These values are not intended for use in preparing specifications. Method Test Unit Dow Corning 7 Relase Compound White, translucent #1 270 322 6.5 0.8 -40 to 400 (-40 to 204) None 1.0 Yes Result Dow Corning 4 Electrical Insulating Compound White, translucent #2 240 279 4.5 1.4 -70 to 400 (-57 to 204) None 1.0 Yes Dow Corning 111 Valve Lubricant & Sealant White, translucent #3 205 217 0.05 1.1 -40 to 400 (-40 to 204) None 1.0 Yes
Color
NLGI Penetration, worked 60 worked 100,000 CTM 0033A Bleed, 24 hr/392F (200C) CTM 0033A Evaporation, 24 hr/392F (200C) Service Temperature Range Melting Point Specific Gravity at 77F (25C) FDA Recognition, 21 CFR 175.300 Dielectric Constant, at 100 Hz at 100 kHz Dissipation Factor, at 100 Hz at 100 kHz Dielectric Strength, 50 mil gap Volume Resistivity at 73F (23C) Arc Resistance
CTM 0112
CTMs (Corporate Test Methods) correspond to standard ASTM tests in most instances. Copies of CTMs are available upon request.
Specification Writers: Please obtain copies of the Dow Corning Sales Specifications for these products and use them as a basis for your specifications. They may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (989) 496-6000.
FPH 29249
Dow Corning is a registered trademark of Dow Corning Corporation. 1996, 1999, 2002 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
Solid lubricants Solvents Binder
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Grey-black s g/ml % months min/C C N
Physical properties
DIN 53211/3 DIN 53217/2 CTM 0242 I Viscosity at 20C (DIN3 cup) Density at 20C Nonvolatile content Storage life 1.07 29 24 5/23 -180 to +450 b =4500 p=12500 s=6800 b = 212 p=146 s=306 b = 178 p = 400 s = 362
Temperature
Curing time Service temperature range ASTM-D2625 Falex load-carrying capacity
ASTM-D2714
ASTM-D2714
LFW-1, rotating F=2860N, n=72 minutes, v=7.9m/minutes no. of revolutions x1000 to =0.1 LFW-1, oscillating F=900N, frequency=89.5osc./minutes no. of oscillations to =0.08
Coefficient of friction
Press-Fit test, = 1. Surface pretreatment: b = blank, p = phosphated, s = sand blasted. * CTM: Corporate Test Method, copies of CTMs are available on request. ASTM: American Society for Testing and Materials. DIN: Deutsche Industrie Norm
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
How to apply
Stir the Anti-Friction Coating thoroughly before applying by spraying or brushing. Recommended dry film thickness: 5 to 20m.
warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
Curing
5 minutes at 23C
Solubility
Thinning can be carried out using MOLYKOTE L 13 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
Product Information
Lubricating grease for plastic/plastic and plastic/metal combinations with slow to medium-fast movements and light loads APPLICATION
Used on vehicle track-rod joints.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard Test Color Unit Result Beige Approx. 2 270-300 0.86 32 -40 to +130 >190 222x10 36x10 280
COMPOSITION
Mineral oil Polyalphaolefine Lithium soap Solid lubricants
Temperature
Service temperature ISO 2176 Drop point ASTM-D147880 Low temperature torque test at -30C Initial break-away torque Torque after 20 minutes running time DIN 51 805 Kesternich method - flow pressure at -20C Four-ball tester (VKA) DIN 51 350 pt.4 Weld load DIN 51 350 pt.5 Wear scar under 400N load
Coefficient of friction
Steel ball against plastic surface (POM) dia (ball) = 12.7mm; load = 5N; v = 10cm/s, 24h, =
Corrosion protection
DIN 51 802 SKF-Emcor method Degree of corrosion 1-2 % % % 4.8 2.4 0.2
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
30/11/1998 DC 3000
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Parameter Appearance Base oil viscosity at 40C JIS K 2220 Penetration (worked 60 times) NLGI class Service temperature range Density JIS K 2220 Drop point JIS K 2220 Bleed (100C 24 hours) JIS K 2220 Evaporation (99C 22 hours) JIS K 2220 Oxidation resistance (99C 100 hours) JIS K 2220 Copper corrosion (100C 24 hours) ASTM D 2596 Four ball weld load (1500rpm/1minute) ASTM D 2266 Four ball wear scar (1200rpm, 392N, 1 hour) JIS K 2220 Low temperature torque test (-40C) Starting torque Running torque *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials. Standard* Unit mm/s Result White 18 325 0 -60 to 130 0.88 195 5.0 0.3 0.02 1a 3140 0.77 39 20
COMPOSITION
x Polyalfaolefin (PAO) x Lithium soap x PTFE, etc.
HOW TO USE
Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONS
This product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling. At high temperatures in excess of 250C, the breakdown of fluorinated polymer can cause the release of a small amount of toxic gas. Ensure adequate ventilation.
PACKAGING
This product is available in 1kg cans (10 cans/case) and 15kg pails.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2006 Dow Corning Corporation. All rights reserved.
Product Information
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Standard* Parameter Appearance Unit Value Translucent White 1050 325 1 -40 to 150 0.84 195 2.5 3.0 0.02 1A 1400 0.71 290 140
COMPOSITION
x Poly--olefin x Lithium soap
JIS K 2220
Base oil viscosity at 40C Penetration (worked 60 times) NLGI class Service temperature range Density JIS K 2220 Drop point JIS K 2220 Bleed (100C24 hours) JIS K 2220 Evaporation (99C22 hours) JIS K 2220 Oxidation resistance (99C100 hours) JIS K 2220 Copper corrosion (100C 24 hours) ASTM D 2596 Four ball weld load (1500rpm/1minute) ASTM D 2266 Four ball wear scar (1200rpm, 392N, 1 hour) JIS K 2220 Low temperature torque test (-40C) Starting torque Running torque *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials.
mm/s
HOW TO USE
Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONS
This product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling.
PACKAGING
This product is available in 1kg cans (10 cans/case) and 16kg pails.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2006 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" High oxidation resistance " Low evaporation " Wide service temperature range -50C to 180C (-58F to 356F) " Good low temperature performance " Low coefficient of friction " Very good corrosion protection " Excellent compatibility with most plastics and rubbers
c d
High performance grease for plastic/plastic, plastic/metal and rubber/metal combinations involving slow to medium-fast movements and light to medium loadings APPLICATIONS
" Suitable for lubrication points with low to medium loadings and speeds. " Used in brake boosters, brake-caliper guide bolts, silent block bushings, video and audio cassettes, water-pump packing, control cables and on sliding-contact surfaces of washing machines and dishwashers.
TYPICAL PROPERTIES
COMPOSITION
" " " "
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, Density, Viscosity DIN 51 818 ISO 2137 ISO 2811 DIN 51 562 NLGI consistency class Worked penetration Density at 20C (68F) Base oil viscosity at 25C (77F) Temperature Service temperature ISO 2176 Dropping point C F C F ASTM D147880 Low temperature torque at -50C (-58F) Initial break-away torque Torque after 20 minutes running time DIN 51 805 DIN 51 808 DIN 51 802 Resistance, Corrosion Oxidation resistance, pressure drop after 100h, 99C (210F) SKF-Emcor corrosion protection Coefficient of friction Steel ball against plastic surface (POM) ball = 12.7mm, load = 6.3N, v = 10mm/s, running time 24h, = * DIN: Deutsche Industrie Norm. ISO: International Standardisation Organisation. <0.04 bar 0.1 0-1 Nm Nm <120x10-3 <90x10-3 <800 -50 to +180 -58 to +356 >250 >482 g/ml mm /s
2
Unit
HOW TO USE
Clean points of contact. Apply in same way as lubricating greases, using brush, spatula or automatic lubrication device. Can be used in central lubrication systems.
PACKAGING
This product is available in various container sizes. Detailed information on container size should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers' tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. Dow Corning and MOLYKOTE are registered trademarks of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
c d
High performance grease for plastic/plastic and plastic/metal combinations involving slow to medium-fast movements and light to medium loadings APPLICATIONS
" Suitable for friction contacts with low to medium loadings and speeds which have to remain serviceable through a wide temperature range. " Used on control cables, water pumps, bearing bushes, gearwheels, slideways and other plastic parts in domestic appliances, toys and electrical appliances.
COMPOSITION
" Silicone oil " Lithium complex thickener
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, density, viscosity DIN 51 818 ISO 2137 ISO 2811 DIN 51 562 NLGI consistency class Worked penetration Density at 20C (68F) Base oil viscosity at 25C (77F) Temperature Service temperature ISO 2176 Drop point C F C F ASTM-D147880 Low temperature torque test at -20C (-4F) Initial break-away torque Torque after 20 minutes running time DIN 51 805 Nm Nm 39x10-3 15x10-3 210 -50 to +190 -58 to 374 250 482 g/ml mm /s
2
Unit
Result White 2
Kesternich method - flow pressure at -20C (-4F) mbar Load-carrying capacity, wear protection, service life Four-ball tester (VKA)
DIN 51 350 pt.4 Weld load Resistance DIN 51 808 Oxidation resistance, pressure drop 100h, 99C (210.2F) Corrosion protection DIN 51 802 SKF-Emcor method Degree of corrosion
N bar
1600 0.1
How to apply
Clean points of contact. Apply in same way as lubricating greases, using brush, spatula, grease-gun or automatic lubricating device. Suitable for delivery by central lubricating system. In the event of long breaks in service, e.g. overnight, the pressure in the delivery equipment should be relieved. Not to be mixed with other greases. Because of variation in quality of plastics and elastomers, compatibility tests should be carried out for swelling and shrinkage, stress-crack formation, and changes in strength and hardness.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Parameter Appearance Base oil viscosity at 40C JIS K 2220 Penetration (worked 60 times) NLGI class Service temperature range Density JIS K 2220 Drop point JIS K 2220 Bleed (100C 24 hours) JIS K 2220 Evaporation (99C 22 hours) JIS K 2220 Oxidation resistance (99C 100 hours) JIS K 2220 Copper corrosion (100C 24 hours) ASTM D 2596 Four ball weld load (1500rpm/1minute) ASTM D 2266 Four ball wear scar (1200rpm, 392N, 1 hour) JIS K 2220 Low temperature torque test (-40C) Starting torque Running torque *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials. Standard* Unit mm/s Result Yellow 29 300 1 to 2 -45 to 150 0.90 195 3.0 0.2 0.02 1a 5200 0.40 93 49
COMPOSITION
x Poly--olefin x Lithium soap x Special solid lubricants
HOW TO USE
Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONS
This product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling. At high temperatures in excess of 200C, the breakdown of fluorinated polymer can cause the release of a small amount of toxic gas. Ensure adequate ventilation.
PACKAGING
This product is available in 1kg cans (10 cans/case) and 16kg pails.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2006 Dow Corning Corporation. All rights reserved.
Product Information
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Parameter Appearance Base oil viscosity at 40C JIS K 2220 Penetration (worked 60 times) NLGI class Service temperature range Density JIS K 2220 Drop point JIS K 2220 Bleed (100C24 hours) JIS K 2220 Evaporation (99C22 hours) JIS K 2220 Oxidation resistance (99C100 hours) JIS K 2220 Copper corrosion (100C 24 hours) ASTM D 2596 Four ball weld load (1500rpm/1minute) ASTM D 2266 Four ball wear scar (1200rpm, 392N, 1 hour) JIS K 2220 Low temperature torque test (-40C) Starting torque Running torque *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials. Standard* Unit mm/s Value White 90 325 1 -45 to 150 0.91 195 5.0 0.4 0.02 1A 3730 0.5 110 51
COMPOSITION
x Poly--olefin x Lithium soap x PTFE, etc.
HOW TO USE
Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONS
This product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling. At high temperatures in excess of 250C, the breakdown of fluorinated polymer can cause the release of a small amount of toxic gas. Ensure adequate ventilation.
PACKAGING
This product is available in 1kg cans (10 cans/case) and 16kg pails.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2006 Dow Corning Corporation. All rights reserved.
Product Information
Light-colored adhesive grease-paste with solid lubricants for metallic friction combinations APPLICATIONS
Sliding surfaces exposed to high pressure loadings and subject to the influence of water of metal machining emulsions. Recommended and successfully used by leading clamping-element manufacturers, especially for chucks on metal processing machines.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Light beige mm/10 g/ml C C 265-300 1.19 -25 to +250 125
COMPOSITION
Mineral oil Synthetic oil Lithium soap Solid lubricants Adhesion improver
Temperature
ISO 2176 ASTMD-1478-80 Service temperature Drop point Low temperature torque test at -20C Initial break-away torque Torque after 20 minutes running time Kesternich method - flow pressure at -20C
DIN 51 805
Nm Nm mbar
Coefficient of friction
Press-Fit test =
Resistance
DIN 51 807 pt.1 Water resistance, static
Corrosion protection
DIN 51 802 SKF-Emcor method Degree of corrosion 0-1
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
30/11/1998 DC 3632
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
Sliding surfaces and friction contacts exposed to heavy loads, especially at low to medium speeds.
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
BENEFITS
x Mineral oil x Aluminum complex thickener x Solid lubricants
Standard
Property
Unit
Value
Color Consistency, Density, Viscosity NLGI Consistency Class Unworked penetration Density at 20C Base oil viscosity at 40C Temperature Service temperature range Load carrying capacity, wear protection, speed Four ball tester, weld load Four ball tester, wear scar under 800N load Coefficient of friction Screw test (Erichsen); coefficient of friction in bolt connection M 12 8.8; thread head Screw test (Erichsen); coefficient of friction in bolt connection M12, material no. 1.4301 thread head Initial breakaway torque at 300C / 21 hours with material no. 1.7709 (starting torque M = 56 Nm) Press-Fit test, = Resistance Water resistance, static
White
N mm
3200 0.90
0.10 0.10
Nm
0.11 0.11 85
0.10 no chatter 1 - 90
DIN 51807 T1
* CTM: * DIN:
Corporate Test Method, copies of CTMs are available on request. Deutsches Institut fuer Normung.
Molykote P-1900 is a mineral oil based food grade paste, which meets FDA regulations 21 CRF 178.3570 and NSF H1 classification for incidental food contact. Molykote P-1900 offers excellent low coefficient of friction and high load carrying capacity
DESCRIPTION
PACKAGING
Molykote P-1900 is available in 400g cartridges, 1kg cans, 25kg pails and 180kg drums. Samples are available in 1kg cans. .
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HOW TO USE
The contact points should be cleaned, wherever possible. Paste should be applied using a suitable brush. It can be delivered by a grease gun. Excess lubrication does not harm.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection
Molykote P-1900 has a usable life of 60 months when stored at or below 20C in the original unopened containers.
www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2003 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" " " " " " "
c d
Excellent adhesion Good corrosion protection Good water resistance Good antifretting Assembly and continuous lubrication Metal-free Low water pollution class
Metal-free adhesive lubrication paste which can be used for all assembly and continuous lubricating jobs, particularly those exposed to corrosive environments such as splash water or humidity APPLICATIONS
" Assembly and threaded connections, spline shafts, mounting of bearings. " Continuous lubrication: for various parts in brake systems, in brake rods, guide bolts. Axles of commercial vehicles, cams and plain bearings. Open Gears. Marine applications.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Test Method* Parameter Color Consistency, viscosity ISO 2137 DIN 51 562 Unworked penetration Base oil viscosity at 40C (104F) Temperature Service temperature - as paste: - solid lubricants: Deutsche Bahn AG test - stirrability at -35C (-31F) DIN 51 805 DIN 2176 Kesternich method - flow pressure at -30C mbar (-22F) Drop point C F Load-carrying capacity, wear protection, service life Four-ball tester (VKA) DIN 51 350 pt.4 Weld load DIN 51 350 pt.5 Wear scar under 800N load Fretting corrosion - Deyber tester Coefficient of friction Press-Fit test, = Screw test - thread1 Screw test - head SRV Optimol
1
Unit
mm/10 mm /s
2
310-350 360
C F C F
-40 to +230 -40 to +446 -40 to +1200 -40 to +2192 4 960 None None
N mm
The sliding surfaces should be cleaned. The paste should then be applied with a suitable brush, rag or grease gun. It should not be mixed with greases or oils.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
www.dowcorning.com
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
MOLYKOTE P 40 Metal-free adhesive lubricating paste 2 Ref. no. 71-0246C-01 20/02/2002 DC 3829
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1998-2002 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
Excellent lubricating properties Good resistance to water washout x High load carrying capacity x Compatible with many plastics or elastomers x Meets FDA Regulation 21 CFR 178.3570 and H1 classification for incidental food contact x Available in NLGI consistency class 0, 1 and 2
x x
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Test DIN 51 818 ASTM D217 ISO 2811 ASTM D 445 Property Color NLGI Consistency Penetration Density at 20C Viscosity @ 40C Service temperature ASTM D2265 ASTM D2596 ASTM D2266 ASTM D1264 Fed 791 Fed 791 Drop point Four-ball weld load Four-ball wear scar Water wash-out, 175F Oil bleed, 24 hrs @ 100C Oil evaporation, 24 hrs @ 100C Unit G-0050 White 0 370 0.89 70
-17 to +150 0 to +302
G-0052 White 2
COMPOSITION
x x x
mm/ 10
g/ml cst C F C F N mm % % %
ASTM: American Society for Testing and Materials ISO: International Standardization Organization DIN: Deutsche Industrie Norm
HOW TO USE
Clean points of contact. Molykote White E.P. Bearing Grease can be applied by hand packing, hand operated grease gun, automatic greasing systems and central lubricating systems. When lubricating antifriction bearings, follow the bearing manufacturers instructions. For plain bearings the new grease should be pumped in until old grease is flushed from system.
DESCRIPTION
Molykote White E.P. Bearing Greases are high performance lubricants designed for the food and beverage industry. They are a mineral based lubricant thickened with aluminum complex and fortified with EP additives. Applications include bearings, gears, chains and sliding mechanisms in manufacturing processes. They are an excellent choice where NSF H1 status lubricant is required or when the product must be free of black particle contamination.
HANDLING PRECAUTOINS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com.
PACKAGING
This product is available in cartridges, pails and drums.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Dow Corning is a registered trademark of Dow Corning Corporation. 2002 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
Solid lubricants Inhibitor Organic binder Water Stabilisers
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Dark grey s g/ml % months minutes min/C min/C min/C C N 24 1.16 30 8 12 15 40/23 10/50 5/90 -70 to +200 p=11300 s=7900 p=343
Physical properties
DIN 53211/4 DIN 53217/2 CTM 0242 I CTM 0007 A Viscosity at 20C (DIN4 cup) Density at 20C Nonvolatile content pH at 20C Storage life
Temperature
Drying time at 20C Curing time Curing time Curing time Service temperature range ASTM-D2625 ASTM-D2714 Falex load-carrying capacity LFW-1, rotating F=2860N, n=72 minutes, v=7.9m/minutes no. of revolutions x1000 to =0.1 LFW-1, oscillating F=900N, frequency=89.5osc./minutes no. of oscillations to =0.08
p=76
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20m.
Curing
40 minutes at 23C, 10 minutes at 50C, 5 minutes at 90C (Object temperature).
Solubility
Thinning can be carried out using distilled water or tap water.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
Product Information
Specialty Lubricants
FEATURES
" " " " " " " "
c d
Low friction coefficient High pressure-absorption capacity Prevents seizure and scoring Suppresses stick-slip Reduces formation of fretting corrosion Facilitates disassembly Good coverage Provides emergency running performance
Solid lubricating paste with particularly low friction coefficient for assembly and running-in of metallic components APPLICATIONS
" Suitable for the press-fit production of all types of machine elements, as a running-in lubricant for new machines and gears, as permanent lubrication of machine elements which are submitted to slight or intermittent movement only, as well as for drilling, sawing and thread-cutting. " Used to lubricate threaded spindles, splined shafts, tooth gearing, worm gearing, moving screws, fittings, pumps, guides on machine tools, as well as for fitting ball and roller bearings, pulleys, wheel flanges and bolts.
COMPOSITION
" Mineral oil " Solid lubricants
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, density Unworked penetration Density at 20C (68F) Temperature Service temperature range Load-carrying capacity DIN 51 350 pt.4 Four-ball tester Weld load Almen Wieland machine OK load Coefficient of friction In bolted connection M12, 8.8 with blackened surface (Erichsen tester), - thread - head Press-Fit test, Resistance DIN 51 807 pt.1 Water resistance, static, evaluation 1-90 * DIN: Deutsche Industrie Norm 0.10 0.06 0.05, no chatter N N 5300 >20000 C F -35 to +450 -31 to +842 mm/10 g/ml 255-275 1.40 Unit Result Black
Clean the sliding surfaces or contact areas, then apply paste with a brush, cloth, synthetic sponge or window leather. Do not use in excess as with
grease lubrication. Vigorous rubbing into metal surface will improve adhesion. Do not mix with greases or oils.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
www.dowcorning.com
MOLYKOTE G-Rapid Plus Solid lubricant paste 2 Ref. no. 71-0084C-01 20/02/2002 DC 2931
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" Particularly high load-carrying capacity " Good water-resistance and water-washed resistance " Prevents stick-slip and seizure " Good corrosion protection " Excellent protection against galling " Cleanness
c d
MOLYKOTE DX Paste
Light-colored grease-paste with solid lubricants for assembly and long-term lubrication of metallic components APPLICATIONS
" Sliding surfaces and friction contacts exposed to heavy loads, requiring "clean" lubrication, especially at low to medium speeds. " Used successfully, for example, on many friction contacts of electrical and domestic appliances, packaging and office machinery, precision instruments, machinery in foodstuffs and beverages industry, as well as in textile and plastics processing machinery.
COMPOSITION
" " " "
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, density, viscosity ISO 2137 ISO 2811 DIN 51 562 Unworked penetration Density at 20C (68F) Base oil viscosity at 40C (104F)1 Temperature Service temperature ASTM D-1478- Low temperature torque test 80 at -20C (-4F) Initial break-away torque Torque after 20 minutes running time DIN 51 805 Kesternich method - flow pressure at -20C (-4F) Load-carrying capacity, wear protection Four-ball tester (VKA) DIN 51 350 pt.4 Weld load DIN 51 350 pt.5 Wear scar under 800N load Almen-Wieland machine OK load Frictional force Coefficient of friction Press-Fit test = Resistance DIN 51 807 pt.1 Water resistance, static evaluation step DIN 51 808 Oxidation resistance, pressure drop after 100h, 99C (210F) bar 2-90 0.8 0.10, no scatter N N 20000 1560 N mm 4800 0.75 Nm Nm mbar 124x10-3 63x10-3 200 C F -25 to +125 -31 to +257 mm/10 g/ml mm2/s 285-315 1.1 110 Unit Result White
LIMITATIONS
The contact points should be cleaned, wherever possible. Paste should be applied using a suitable brush. It can be delivered by a grease gun or central lubricating system. Excess lubrication does not harm.
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
www.dowcorning.com
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers' tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. 13/09/2002 DC 3633 Dow Corning and MOLYKOTE are registered trademarks of Dow Corning Corporation. 2002 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" High load-carrying capacity " Low coefficient of friction, ( = 0.09, no stick-slip) " Prevents frictional corrosion and scoring " Protection from stick-slip " Good anti-corrosion properties " Reduces formation of fretting corrosion " Simplifies dismantling processes " High surface covering capacity (40m2/kg)
c d
MOLYKOTE G-N PLUS Solid Lubricant Paste
Solid lubricant paste for the assembly and running-in of metal components APPLICATIONS
" Press-fit production of all types of machine elements, as a running-in lubricant for new machines and gear-boxes. " Permanent lubrication of machine elements that are moved only rarely or slightly and also for drilling, sawing and thread cutting. " Used successfully for lubricating threaded spindles, splined shafts, toothed gears, worm and transmission gears, screws, valves, pumps, machine-tool guides and also for the tightening and fitting of roller bearings, washers, wheels, flanges and bolts.
COMPOSITION
" Mineral oil " Solid lubricants " Thickener
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Penetration, density ISO 2137 ISO 2811 Unworked penetration Density at 20C (68F) Temperature Service temperature1 C -25 to +450 with reduced air access +630 -13 to +842 with reduced air access +1166 mm/10 g/ml 280-310 1.35 Unit Result Black
Load-carrying capacity, wear protection, service life Four-ball tester DIN 51 350 pt.4 Weld load DIN 51 350 pt.5 Wear scar under 800N load Almen-Wieland machine OK load Frictional force Coefficient of friction Press-Fit test = Screw test: Erichsen Screw test - head
2
N mm N N
Clean the sliding surfaces or contact areas, then apply paste with a brush, cloth, synthetic sponge or window leather. Do not use in excess as with grease lubrication. Vigorous rubbing into metal surface will improve adhesion. Do not mix with greases or oils.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
www.dowcorning.com
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers' tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
MOLYKOTE G-N PLUS Solid Lubricant Paste 2 Ref. no. 71-0083B-01
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. 13/09/2002 DC 2930 Dow Corning and MOLYKOTE are registered trademarks of Dow Corning Corporation. 2002 Dow Corning Corporation. All rights reserved.
Product Information
Chain Oils
FEATURES
Lower overall maintenance costs Wider temperature range Longer oil-drain intervals Reduced lubricant consumption Extended equipment lifetime Reduced energy consumption Long life reduces lubricant usage, maintenance cost
COMPOSITION
Hydroprocessed mineral oil (MO), polyalphaolefin (PAO) and polyalphaolefin/mineral oil (PAO/MO) based lubricants.
Molykote gearbox and chain oils help prevent wear and process interruptions in power transmission systems and components. Compared to conventional oils, they also offer greater resistance to oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils maximize fill intervals and maintain viscosity characteristics at wide temperature ranges.
DESCRIPTION
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
HOW TO USE
Follow equipment manufacturers recommendations for maintenance procedures and oil specifications. To ensure the longest possible life span for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of antioxidants in lubricating fluids. Moreover, sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information.
Molykote gearbox and chain oils have a shelf life of 60 months from date of manufacture. Refer to product packaging for use-by date.
PACKAGING
Molykote gearbox and chain lubricants are available in 18.9- and 208.2-L (5- and 55-gal) containers.
LIMITATIONS
These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
Molykote lubricating fluids are kosher approved and conform to USDA listing requirements under H-1 or H-2 designations (see Typical Properties table). An H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. An H-2 designation indicates the lubricated part cannot have contact with food.
SHIPPING LIMITATIONS
None.
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Viscosity @ 100C, cSt Viscosity @ 100F, cSt Viscosity @ 210F, cSt Viscosity @ 40C, cSt Viscosity Index Flash Point, F Pour Point, C Additive Package R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW T/PPD R&O/AW T/PPD R&O/AW Density @ 20C, g/mL Density @ 20C, lb/gal
Fire Point, F
AGMA2#
USDA
Molykote brand Product Gearbox Oils1 L-0115 Gear Oil ISO 150 L-0115FG Gear Oil ISO 150 L-0122 Gear Oil ISO 220 L-0122FG Gear Oil ISO 220 L-0132 Gear Oil ISO 320 L-0146 Gear Oil ISO 460 L-0146FG Gear Oil ISO 460 L-1115 Synthetic Blend Gear Oil - ISO 150 L-1115FG Synthetic Blend Gear Oil - ISO 150 L-1122 Synthetic Blend Gear Oil - ISO 220 L-1122FG Synthetic Blend Gear Oil - ISO 220 L-1132 Synthetic Gear Oil ISO 320 L-1146 Synthetic Gear Oil ISO 460 L-1146FG Synthetic Gear Oil ISO 460 L-01681 Gear Oil L-11681 Synthetic Gear Oil Chain Oils1 L-0460FG Blend Chain Oil (ISO 68) L-1468FG Synthetic Freezer Chain Oil (ISO 68) L-1428 High Temperature
1 2
H-23 H-14 H-2 H-1 H-2 H-2 H-1 H-2 H-1 H-2 H-1 H-2 H-2 H-1 H-2 H-2
149.4 150 223 219.1 312 456.6 441.1 145 134.7 211.6 197.8 342.5 455.2 380.2 659 674
14.8 15.4 20.4 20 31 32.8 33.1 15.6 17.4 19.5 24 30.8 45.1 39.2 42 48
169.3 170.1 265.6 249.7 349.5 507.5 507.5 162 151.3 251.8 220.8 388.6 512.4 428.3 764 772.1
15.2 15.9 21 20.7 31.6 33.8 34.2 16 17.8 20.2 24.7 31.8 46.5 40.4 43 51.2
100 100 101 101 134 107 107 100 122 120 142 126 154 147 105 128
500 500 510 490 460 575 575 515 435 500 440 540 545 545 485 505
530 530 550 510 515 620 620 530 470 510 490 590 595 595 555 580
-18 -18 -18 -21 -18 -18 -18 -18 -39 -21 -33 -39 -36 -36 -21 -27
4 4 5 5 6 7 7 4 4 5 5 6 7 7 8 8
0.86 0.86 0.86 0.86 0.87 0.87 0.88 0.87 0.85 0.87 0.85 0.85 0.852 0.852 0.88 0.85
7.16 7.16 7.16 7.16 7.24 7.24 7.32 7.24 7.07 7.24 7.07 7.07 7.09 7.09 7.32 7.07
90-140 PAO/PB 140 140 140 140 PAO/PB PAO MO/PB PAO/PB
66 65.8 285
8.3 9.8 24
8.6 10 26
30 30
MO PAO POE/PB
Typical values; not for use in preparing specifications. AGMA is an acronym for American Gear Manufacturers Association. 3 The H-2 designation indicates the lubricated part cannot have contact with food. 4 The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. We help you invent the future. www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. 2003 Dow Corning Corporation. All rights reserved.
Base Oil
SAE#
Product Information
Chain Oils
FEATURES
Lower overall maintenance costs Wider temperature range Longer oil-drain intervals Reduced lubricant consumption Extended equipment lifetime Reduced energy consumption Long life reduces lubricant usage, maintenance cost
COMPOSITION
Hydroprocessed mineral oil (MO), polyalphaolefin (PAO) and polyalphaolefin/mineral oil (PAO/MO) based lubricants.
Molykote gearbox and chain oils help prevent wear and process interruptions in power transmission systems and components. Compared to conventional oils, they also offer greater resistance to oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils maximize fill intervals and maintain viscosity characteristics at wide temperature ranges.
DESCRIPTION
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
HOW TO USE
Follow equipment manufacturers recommendations for maintenance procedures and oil specifications. To ensure the longest possible life span for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of antioxidants in lubricating fluids. Moreover, sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information.
Molykote gearbox and chain oils have a shelf life of 60 months from date of manufacture. Refer to product packaging for use-by date.
PACKAGING
Molykote gearbox and chain lubricants are available in 18.9- and 208.2-L (5- and 55-gal) containers.
LIMITATIONS
These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
Molykote lubricating fluids are kosher approved and conform to USDA listing requirements under H-1 or H-2 designations (see Typical Properties table). An H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. An H-2 designation indicates the lubricated part cannot have contact with food.
SHIPPING LIMITATIONS
None.
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Viscosity @ 100C, cSt Viscosity @ 100F, cSt Viscosity @ 210F, cSt Viscosity @ 40C, cSt Viscosity Index Flash Point, F Pour Point, C Additive Package R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW T/PPD R&O/AW T/PPD R&O/AW Density @ 20C, g/mL Density @ 20C, lb/gal
Fire Point, F
AGMA2#
USDA
Molykote brand Product Gearbox Oils1 L-0115 Gear Oil ISO 150 L-0115FG Gear Oil ISO 150 L-0122 Gear Oil ISO 220 L-0122FG Gear Oil ISO 220 L-0132 Gear Oil ISO 320 L-0146 Gear Oil ISO 460 L-0146FG Gear Oil ISO 460 L-1115 Synthetic Blend Gear Oil - ISO 150 L-1115FG Synthetic Blend Gear Oil - ISO 150 L-1122 Synthetic Blend Gear Oil - ISO 220 L-1122FG Synthetic Blend Gear Oil - ISO 220 L-1132 Synthetic Gear Oil ISO 320 L-1146 Synthetic Gear Oil ISO 460 L-1146FG Synthetic Gear Oil ISO 460 L-01681 Gear Oil L-11681 Synthetic Gear Oil Chain Oils1 L-0460FG Blend Chain Oil (ISO 68) L-1468FG Synthetic Freezer Chain Oil (ISO 68) L-1428 High Temperature
1 2
H-23 H-14 H-2 H-1 H-2 H-2 H-1 H-2 H-1 H-2 H-1 H-2 H-2 H-1 H-2 H-2
149.4 150 223 219.1 312 456.6 441.1 145 134.7 211.6 197.8 342.5 455.2 380.2 659 674
14.8 15.4 20.4 20 31 32.8 33.1 15.6 17.4 19.5 24 30.8 45.1 39.2 42 48
169.3 170.1 265.6 249.7 349.5 507.5 507.5 162 151.3 251.8 220.8 388.6 512.4 428.3 764 772.1
15.2 15.9 21 20.7 31.6 33.8 34.2 16 17.8 20.2 24.7 31.8 46.5 40.4 43 51.2
100 100 101 101 134 107 107 100 122 120 142 126 154 147 105 128
500 500 510 490 460 575 575 515 435 500 440 540 545 545 485 505
530 530 550 510 515 620 620 530 470 510 490 590 595 595 555 580
-18 -18 -18 -21 -18 -18 -18 -18 -39 -21 -33 -39 -36 -36 -21 -27
4 4 5 5 6 7 7 4 4 5 5 6 7 7 8 8
0.86 0.86 0.86 0.86 0.87 0.87 0.88 0.87 0.85 0.87 0.85 0.85 0.852 0.852 0.88 0.85
7.16 7.16 7.16 7.16 7.24 7.24 7.32 7.24 7.07 7.24 7.07 7.07 7.09 7.09 7.32 7.07
90-140 PAO/PB 140 140 140 140 PAO/PB PAO MO/PB PAO/PB
66 65.8 285
8.3 9.8 24
8.6 10 26
30 30
MO PAO POE/PB
Typical values; not for use in preparing specifications. AGMA is an acronym for American Gear Manufacturers Association. 3 The H-2 designation indicates the lubricated part cannot have contact with food. 4 The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. We help you invent the future. www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. 2003 Dow Corning Corporation. All rights reserved.
Base Oil
SAE#
Product Information
Multi purpose mineral oil spray for food processing equipment APPLICATIONS
x
Easy to use Good penetration High corrosion protection High load capability Meets FDA Regulation 21 CRF 178.3570 and USDA H1 Classification for incidental food contact Odorless and tasteless
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Standard Test Color Viscosity Base oil viscosity at 40qC Base oil viscosity at 100qC Viscosity index of base oil Temperature Service temperature range Pour point Unit Value Transparent 96 11 102 -10 to +120 <-10
COMPOSITION
x x x x
mm/s mm/s
C C
Load Carrying Capacity, Wear Protection, Speed Four-Ball Tester (VKA), mm 0.5 Wear Scar under 40 kg Load, 1200 rpm Corrosion Protection Corrosion protection Pass
ASTM D665
ASTM: American Society for Testing and Materials. DIN: Corporate Deutsche Industrie Norm. ISO: International Standardization Organization.
DESCRIPTION
Molykote Food Grade Spray Oil is a multi-purpose mineral oil aerosol. It is suitable for applications in the food, pharmaceutical and similar industries.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
HOW TO USE
Shake well before use. Clean contact surfaces before spraying.
PACKAGING
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. 2003 Dow Corning Corporation. All rights reserved.
Product Information
APPLICATION
x Suitable for lubrication of chains. x Wide service temperature range
COMPOSITION
Synthetic oil Antioxidant EP additives
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local DowCorning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Brownish, transparent 0.94 220
Density, viscosity
DIN 51 757 DIN 51 562 Density at 20C Viscosity at 40C g/ml mm/s
C F
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOWCORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest DowCorning sales office or DowCorning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
30/11/1998 DC 3006
MOLYKOTE is a registered trademark of DowCorning Corporation. 1997-2001 DowCorning Corporation. All rights reserved.
Product Information
TYPICAL PROPERTIES
These values are not intended for use in preparing specifications. Method Test Color Density at 77F (25C) Viscosity 100F (38C) 210F (99C) Flash Point Pour Point Unit lb/gal SUS SUS F (C) F (C) Result Black 8.3 650 105 450 (232) -20 (-29)
COMPOSITION
A stable dispersion of microscopic graphite particles in a polyalkylene glycol carrier fluid Supplied as low-viscosity fluid Forms solid lubricant film after fluid evaporation
ASTM D 88
ASTM D 92 ASTM D 97
Specification Writers: Please obtain a copy of the Dow Corning Sales Specification for this product and use it as a basis for your specifications. It may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (517) 496-6000.
HOW TO USE
Dow Corning C-40 High Temperature Chain Lubricant can be used as supplied and requires no stirring. It can be applied manually by brush or hand oiling, as well as with such automatic lubrication equipment as drop-feed, wick, brush and oil-mist systems. Amount supplied may be adjusted to avoid smoking. For best results, it should be applied to surfaces under 250F
(121C). Best operating conditions, however, are over 350F (177C) at
which point the polyalkylene glycol is cleanly volatized from the surface. Continuous operation between 250 and 350F (121 and 177C) may cause gumming.
AUTHORIZATIONS
Dow Corning C-40 High Temperature Chain Lubricant meets the requirements of USDA H-2.
PACKAGING
Dow Corning C-40 High Temperature Chain Lubricant is supplied in 1quart, 5-gal and 55-gal (2-, 40- and 450-lb) containers, net weight.
USE LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
SHIPPING LIMITATIONS
AV00823
None.
A worker fills the reservoir of an automatic oiler designed to apply one shot of Dow Corning C-40 High Temperature Chain Lubricant to each conveyor bearing as it passes underneath. The oils glycol carrier evaporates in a 530 F (277 C) bake oven without leaving a residue. The graphite constituent of the lubricant remains to keep the bearings rolling freely.
AGP4480
Dow Corning is a registered trademark of Dow Corning Corporation. 1997, 1999 Dow Corning Corporation. All rights reserved.
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Black g/ml s C 0.91 73.2 Depends on the lubricating oil used
COMPOSITION
Mineral oil Molybdenum disulphide Dispersant
ISO 2811 4 DIN 53 211
Density, viscosity
Density at 20C (68F) Viscosity
Temperature
Service temperature
PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE,
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
11/12/2000 DC 3631
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Black g/ml 0.87
COMPOSITION
Mineral oil Inhibitors Adhesion improver Solid lubricants Solvents
Density
Density at 20C Four-ball tester (VKA) DIN 51 350 pt.4 Weld load DIN 51 350 pt.5 Wear scar under 800N load
Corrosion protection
DIN 51 802 SKF-Emcor method Degree of corrosion 0-1
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
13/11/1998 DC 3629
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
Synthetic oil Solid lubricants Inorganic thickener Adhesion improver
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Black C 10 to 160 250-280
Temperature
Service temperature range Unworked penetration Four-ball tester (VKA) DIN 51 350 pt.5 Wear scar under 600N load DIN 51 350 pt.4 Weld load Almen Wieland machine OK load
Density, viscosity
Density at 20C Base oil viscosity at 40C * DIN: Deutsche Industrie Norm
Gears
The tooth profiles of new gears should be treated with DOW CORNING G-n Metal assembly paste or spray and run without load for a short time to generate a basic solid lubricating film. The gears should then be lubricated with DOW CORNING 1122 Chain and Open Gear Grease in accordance with the gear manufacturer's instructions.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Product Information
Quick-action penetrating agent incorporating corrosion protection, water-repellent and lubricating properties APPLICATIONS
Suitable for frictional contacts, running at low to medium speeds, which are not equipped with grease nipples or oiling holes. Used on joints, levers, chains and other components of transport and conveyor equipment, textile machinery, automatic filling units and all types of packaging equipment.
COMPOSITION
Mineral oil Solid lubricants Corrosion inhibitors Stabilizer
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard Test Color Unit Result Light amber g/ml mm/s C 0.84 11.8 -30 to +80
Density
Density at 20C Viscosity at 40C
Temperature
Service temperature Four-ball tester (VKA) DIN 51 350 pt.4 Weld load Weld scar under 800N load
SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
05/01/1998 DC 3630
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
Mineral oil Adhesion improver Solvent Corrosion inhibitors Propellant
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Bright, transparent g/ml mm/s 0.83 3.6
Density, viscosity
ISO 2811 DIN 51 562 Density at 20C Viscosity at 40C
Corrosion protection
ISO/R 1456 Salt spray test * ISO: International Standardisation Organisation DIN: Deutsche Industrie Norm
HANDLING PRECAUTIONS
Spray can - Aerosol propellant: CO. Pressurised container - protect from sunlight and do not expose to temperatures exceeding 50C. Do not pierce or burn, even after use. Do not spray on a naked flame or any incandescent material. Combustible.
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Transparent g/ml s 0.85 12.5
COMPOSITION
Mineral oil Solid lubricants Stabilizers Solvent Corrosion inhibitor
Density, viscosity
ISO 2811 4 DIN 53 211 Density at 20C Viscosity
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area. For further information, please consult your local Dow Corning representative.
13/11/1998 DC 3003
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
c d
Copper paste for components subjected to high temperatures, high pressures and corrosive influences APPLICATIONS
" Well suited for all areas which need to be protected against water, steam and corrosion, e.g. brake mechanisms, flange seals, exhauster bolts.
TYPICAL PROPERTIES
COMPOSITION
" Powdered copper " Partly synthetic oil " Inhibitor
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, density, viscosity ISO 2137 DIN 53 217 DIN 51 562 Unworked penetration Density at 20C (68F) Base oil viscosity at 40C (104F) Temperature Service temperature C F ISO 2176 Drop point C F Load-carrying capacity, wear protection, service life Four-ball tester DIN 51 350 pt.4 Weld load DIN 51 350 pt.5 Wear factor under 800N load Almen-Wieland machine OK load Coefficient of friction Press-Fit test = Screw test: Coefficient of friction of bolt connection M12, 8.8, blackened surface - thread - head Initial break-away torque (M12 with starting torque Ma=80Nm and heat treatment at 300C/572F, 21h, bolt material: C 45, 8.8, mat.no. 1.0503) Nm 0.17 0.10 110 0.07 N >20000 N mm 2500 1.0 -30 to +650; paste effective to +300 -22 to +1202; paste effective to +572 None None mm/10 g/ml mm2/s 320-370 1.0 1100 Unit Result Copper colored
If possible, contact surfaces should be cleaned. Then apply paste with a brush or cloth. Excess lubricant need not be removed. MOLYKOTE Cu-7439 Plus Paste can be used in grease guns and centralised lubrication systems.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
www.dowcorning.com
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
Highly pure (less than 500mg of sulphur, less than 200mg of chlorine and fluorine per kg of lubricant) Can be used at temperatures up to 1400C (2552F) Coefficient of friction in the range of oiled bolts Low scatter of prestressing force on tightening Avoidance of stress cracks and solder brittleness Enables non-destructive loosening of bolted joints even after long use at high temperatures
Extremely pure, solid lubricant paste for bolted joints. It contains no lead, nickel, sulphur, chlorine or fluorine APPLICATIONS
Suitable for screws, nuts and bolts that are subjected to extremely high temperatures and which are made of heat-resistant or extremely heat resistant steels, eg those made from nickel-based alloys. Used successfully for the bolted joints of gas and steam turbines in power stations.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard Test Color Unit Result Grey-Black mm/10 g/ml C F N mm 280-310 1.2 -40 to 1400 -40 to 2552 4400 1.7 0.15 0.09 126
Penetration, density
ISO 2137 ISO 2811 Unworked penetration Density at 20C (68F)
SPECIFICATIONS
Complies with Siemens TLV 9600 02/01 Complies with General Electric TIL 1117-3RI Complies with EDF-PMUC 04034 Complies with Pratt & Whitney PWA-36246
Temperature
Service temperature
Coefficient of friction
Screw test - thread Screw test - head Initial break-away torque
COMPOSITION
Solid lubricants in practically sulphur free, partly synthetic oil Thickener Adhesion improver
Nm
1. Temperature resistance of solid lubricants. 2. Coefficient of friction in bolted connection, M12 x 1.75, material 8.8, blackened. 3. M 12 x 1.75, with starting torque Ma = 56 Nm and heat treatment at 540C (1004F), 21 hours, bolt material: 21 Cr Mo Ni V 57 mat no. 1.7709.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your
local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 0-2001 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" " " " " " " "
c d
Solid lubricant paste used in the assembly and fitting of a wide range of components such as metal threaded connections APPLICATIONS
" Suitable for a wide range of applications in the chemical, petrochemical, paper and automotive industry, and in engineering, wood and plastic processing. " Used on bolted connections, sliding contact bearings, linear sliding guides, splined shafts, press-fit joints, exhaust bolts, spark plug threads, flanges and flange seals, door hinges, brake mechanisms and plate springs.
Metal-free Good corrosion protection High load-carrying capacity Coefficient of friction is of the same order as for oiled bolts Low scattering of pre-tensioning force Prevention of stress cracking and brittleness Wide service temperature range Wear reduction
TYPICAL PROPERTIES
COMPOSITION
" " " "
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Physical properties Color ISO 2137 DIN 2811 Unworked penetration Density at 20C Base oil viscosity at 40C Service temperature range mm/10 g/ml mm2/s C Grayish black 280-310 1.21 65 -40 to +200 as a paste, to +1500 dry lubrication None Approx. 400 2.8 120 Unit Result
Drop point Flow pressure at -40C Oil separation, 7 days, 40C Corrosion protection Salt spray test at 50m thickness
C mbar % h
Load-carrying capacity, wear protection, service life DIN 51 350 pt.4 Four-ball tester Weld load DIN 51 350 pt.5 Four-ball tester Wear scar at 800N load SRV test, type Optimol ball/plane, load 300N endurance test, friction coefficient Step load test, max. load Wear scar Coefficient of friction Pressfit Screw test: Erichsen Friction coefficient in bolt connection M-12 alloy 1.7709 Alloy Sopral P 40 aluminium thread 0.117 head 0.078 thread 0.13 head 0.094 0.14 N mm mm 1.1 0.10 1200 0.74 N 4800
Sopral 60 aluminium M-12, break away torque Nm after 21h at 300C Resistance against water DIN 51807 Part 1 Water resistance at 40C
0 0-1
SPECIFICATIONS
General Motors (Opel) B0401264 Volkswagen TL 52112 No. B7217 Complies with General Electric TIL 1117-3RI Complies with EDF-PMUC 04034 Complies with Pratt & Whitney PWA-36246
When stored at or below 20C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
If possible, clean the thread and used bolts with a wire brush. Spread an adequate amount of the paste on the contact areas in order to obtain a good seal. An excess is not harmful. In order not to alter the properties, the paste must not be mixed with greases or oils. Use spray can in order to apply the product more quickly and cleanly to larger areas or poorly accessible places. Can be applied via centralized lubrication system.
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" Can be used over a wide range of temperature (-30C/-22F to 1100C/2012F) " Enables non-destructive dismantling, even after long use at high temperatures " High load-carrying capacity " Due to stated coefficient of friction, defined pre-stressing forces for bolted joints can be achieved " Good corrosion protection " Good electrical conductivity
c d
" For metal/metal combinations that are subjected to high temperatures and frictional contacts which, typically for bolted joints, are free from lead or nickel. " Suitable for lubrication points with low speeds, subjected to high temperatures and corrosive effects, and also require a low and constant coefficient of friction. As a contact lubricant for electrically conducting components. " Used successfully for stud bolts of gas and steam turbines, stud bolts of turbochargers of diesel engines, flanged connections in chemical and petrochemical plants.
TYPICAL PROPERTIES
COMPOSITION
" " " "
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Penetration, density, viscosity ISO 2137 ISO 2811 Unworked penetration Density at 20C (68F) Temperature Service temperature1 ISO 2176 Drop point C F C F Load-carrying capacity, wear protection, service life Four-ball tester DIN 51 350 pt.4 Weld load DIN 51 350 pt.5 Wear scar under 400N load DIN 51 350 pt.5 Wear scar under 800N load Almen-Wieland machine OK load Frictional force N N 20000 1700 N mm mm 4800 0.6 1.1 -30 to 1100 -22 to 2012 None None mm/10 g/ml 250-280 1.4 Unit Result Copper
Unit
Result
0.14 0.09
Initial break-away torque Nm 120 1. Temperature limit of solid lubricants 2. Coefficient of friction in bolted connection, M12, 8.8, on blackened surface. 3. M 12, with starting torque Ma = 56Nm and heat treatment at 540C/1004F, 21h, bolt material: 21 Cr MoV 57 mat no. 1.7709. * ISO: International Standardisation Organisation. DIN: Deutsche Industrie Norm.
PACKAGING
If possible, clean the thread and used bolts with a wire brush. Spread an adequate amount of the paste on the contact areas in order to obtain a good seal. An excess is not harmful. In order not to alter the properties, the paste must not be mixed with greases or oils. Use spray can in order to apply the product more quickly and cleanly to larger areas or poorly accessible places.
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
www.dowcorning.com
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. 20/02/2002 DC 2905 MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
c d
Solid lubricant paste for bolted metal joints; contains no lead or nickel APPLICATIONS
" Suitable for bolted joints that are subjected to high temperatures up to 650C (1202F) and to corrosive effects, and which, after assembling and the initial operation, have to be re-tightened or disconnected. In order to ensure constant pre-stressing forces, uniform and steady coefficients of friction of the lubricant are necessary. " Used successfully for cylinder head bolts, nozzle head screws of plastic injection molding machines, bolted joints in the chemical industry, and also for the tension rings of centrifuges.
COMPOSITION
" " " "
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Penetration, density ISO 2137 ISO 2811 Unworked penetration Density at 20C (68F) Temperature Service temperature1 C F Load-carrying capacity, wear protection, service life Four-ball tester DIN 51 350 pt.4 Weld load DIN 51 350 pt.5 Wear scar under 400N load Almen-Wieland machine OK load Frictional force Coefficient of friction Screw test - thread2 Screw test - head Initial break-away torque3 DIN 51 802 SKF-Emcor method Nm 0.13 0.08 135 1 N N 20000 2600 N mm 4800 0.08 -18 to 1093 -20 to 2000 mm/10 g/ml 280-310 1.26 Unit Result Brown
1. Temperature resistance of solid lubricants. 2. Coefficient of friction in bolted connection, M12, 8.8, on blackened surface. 3. M 12, with starting torque Ma = 62Nm and heat treatment at 540C (1004F), 21h, bolt material: no. 1.7709. * ISO: International Standardisation Organisation. DIN: Deutsche Industrie Norm.
If possible, clean the thread and the bolt with a wire brush. Spread an adequate amount of the paste on the thread, right up to its root in order to obtain a good seal. In order not to alter the properties, the paste must not be mixed with grease or oils. To enable this product to be applied more quickly and cleanly to larger areas, it is advisable to use the spray can.
Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
www.dowcorning.com
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product
MOLYKOTE 1000 Solid lubricant paste 2 Ref. no. 71-0218 -01 20/02/2002 DC 2909 WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
PTFE Binder Solvent Ultra-Violet indicator
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Colorless s g/ml % months C min min/C 12 0.87 23 24 -180 to +240 5-10 120/20 b=6 p=30 s=10
Physical properties
DIN 53211/4 DIN 53217/2 Viscosity at 20C (DIN4 cup) Density at 20C Solid content Storage life
Temperature
Service temperature range Drying time at 20C Curing time ASTM-D2714 LFW-1, rotating F=680 N, n=72 min, v=7.9 m/minute no. of revolutions x1000 to =0.1
1. Calculated value. 2. Surface pretreatment: b = blank, p = phosphated, s = sand blasted. * ASTM: American Society for Testing and Materials. DIN: Deutsche Industrie Norm.
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20m.
Curing
120 minutes at 20C
Solubility
Thinning can be carried out using MOLYKOTE L13 Thinner.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
www.dowcorning.com
25/10/2001 DC 3730
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
Extreme-pressure, dry film lubricant provides exceptional release and lubricating properties APPLICATIONS
Dow Corning 557 Silicone Dry Film Lubricant can be used: In steel production where it can increase slitter-blade life, resulting in clean, square edges In aluminum production where it can lengthen the life of tools and dies, improve surface finish, lubricate sliding surfaces and surfaces during extruding, deep drawing or spinning In machine shops where it can improve surface finishes; extend the life of cutting tools, taps, dies, drills, slitters, and forming tools; reduce wear and reduce stick-slip or metal seizure on bearings, slides, cams adjusting screws, guides and ways For textile, paper and woodworking industries where it can reduce wear and friction and reduce product staining from spinning frames, knives, scissors, punches, chain, conveyors or material-handling equipment For rubber and plastic industries where it can reduce sticking, pickup or product contamination from handling equipment, knives, conveyors or sliding surfaces
COMPOSITION
Waxlike, extreme-pressure lubricant Supplied as liquid or aerosol; remains as wax film after solvent evaporation
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Method As Supplied CTM1 0137A Test Color Specific Gravity Flash Point2 Service Temperature Range3 Drying Time Solvent, bulk Unit Result Clear 0.77 39 (102) -40 to 43 (-40 to 110) 30 Naphtha Clear wax film 32-46 (90-115) No stick-slip 1200 0.85 0.07
As Applied Appearance Melting Range Press Fit4 ASTM D 2596 Four Ball Weld Load Fed Std 791a5 Four Ball Wear Scar Coefficient of Friction4
1
C (F) N mm
Corporate Test Methods (CTMs) correspond to standard ASTM tests in most instances. Copies of CTMs are available upon request. 2 Bulk form only. 3 Estimated service temperature range based on product formulation and laboratory testing. Actual service temperature range is dependent on other factors including the specific application environment. 4 Tested on a Falex LFW-4 Press Fit tester, steel vs. steel, Rc60, 0.6-inch per minute, 12,000 psi in air, room temperature. 5 Method 6514.1.
DESCRIPTION
Dow Corning 557 Silicone Dry Film Lubricant is: An extreme-pressure lubricant with exceptional release properties for cutting and forming metals, and with lubricating properties for heavily loaded tracks, cams, slides, etc. Colorless in thin films Nonstaining to paper or fabrics The solvent evaporates after application, leaving a nearly transparent, thin film. This lubricant film begins to melt at 32C (90F) and adheres tenaciously to most surfaces, whether in a solid or fluid state.
In most dip operations, excessive solvent loss is unavoidable and the solvent must be replenished. Adding naphtha alone will not suffice. The solvent component consists of 94 percent naphtha (41C [105F] flash point) mixed with methyl amyl alcohol. This premix should be added to the depleted product that has been heated to 32C (90F) and stirred until all wax solids have gone back into solution. Methyl amyl alcohol can be added up to 8 percent, but not less than 6 percent of the solvent mixture. The amount of premix solvent to be added can be determined through experience or by conducting a percent solids test by weighing a well-mixed 3-g (0.1-oz) sample, heating to 105C (221F) for 20 minutes and weighing the remaining wax at room temperature. When adding solvent, strive for no more than 8 percent wax solids unless a thicker film is desired than provided by the standard formulation. This rejuvenation process should work three to four times after which the used material should be replaced with fresh product.
LISTINGS/SPECIFICATIONS
Dow Corning 557 Silicone Dry Film Lubricant is authorized for use in official establishments operating under the Federal Meat And Poultry Inspection Program (formerly USDA H2 ratings) where there is no possibility of food contact.
Removal of Film
Dow Corning 557 Silicone Dry Film Lubricant may be removed by most solvents or by vapor degreasing.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE FROM YOUR DOW CORNING REPRESENTATIVE, OR DISTRIBUTOR, OR BY CALLING YOUR GLOBAL DOW CORNING CONNECTION.
product packaging for Use By date. When stored at or below 4C (40F), solid material may precipitate. When the material is warmed to room temperature, this material will readily redissolve without affecting lubrication properties.
WARRANTY INFORMATION
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers tests to ensure that Dow Cornings products are safe, effective, and fully satisfactory for the intended end use. Dow Cornings sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
PACKAGING
Dow Corning 557 Silicone Dry Film Lubricant is supplied in aerosol cans containing 312 g (11 oz), in 15.1-kg (5-gal) pails and in 166.4-kg (55-gal) drums. All weights, net.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
SHIPPING LIMITATIONS
Dow Corning 557 Silicone Dry Film Lubricant is a combustible material. Dow Corning 557 Silicone Dry Film Lubricant Spray has the DOT Classification: Compressed gas NOS flammable gas.
AGP4934
Dow Corning is a registered trademark of Dow Corning Corporation. 1993, 1998, 2000 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
Solid lubricants Organic binder Corrosion inhibitor Solvent
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Grey s g/ml % years minutes minutes/C minutes/F C F N 47 1.08 34.5 5 15 120/20 120/68 -200 to +310 -328 to +590 s=10700 s=45
Physical properties
DIN 53211/3 DIN 53217/2 CTM 0242 I Viscosity at 20C or 68F (DIN3 cup) Density at 20C (68F) Non-volatile content Storage life
Temperature
Drying time at 20C (68F) Curing time Curing time Service temperature range Service temperature range ASTM-D2625 ASTM-D2714 Falex load-carrying capacity LFW-1, rotating F=2860N, n=72 minutes, v=7.9m/minutes no. of revolutions x1000 to =0.1 LFW-1, oscillating F=900N, frequency=89.5osc./minutes no. of oscillations to =0.08
ASTM-D2714
s=25
Resistance
Radiation resistance rad 10 1. Surface pretreatment: s = sand blasted. * CTM: Corporate Test Method, copies of CTMs are available on request. ASTM: American Society for Testing and Materials. DIN: Deutsche Industrie Norm
Coating. Phosphatization or sandblasting (180 grid) increases the adhesion and service life.
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20m.
Environment and Regulatory Affairs specialists available in each area. For further information, please consult your local Dow Corning representative.
Curing
120 minutes at 20C (68F).
Solubility
Thinning can be carried out using MOLYKOTE L 13 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Product Information
Specialty Lubricants
FEATURES
" Extremely high load-bearing capacity " Resistant to galling through mixed friction. Wear protection due to solid lubricants and extreme pressure (EP) additives " Extremely adhesive due to incorporated adhesion improver " Good protection against corrosion " Contains no lead or nickel
c d
Fluid grease for the lubrication of highly stressed transmissions with metal gears APPLICATIONS
" Closed gears that are subjected to high stresses, frictional corrosion and moisture. " Used successfully for highly stressed gears that are subjected to high stresses, frictional corrosion and moisture.
TYPICAL PROPERTIES
COMPOSITION
" " " " " "
Mineral oil Lithium soap Solid lubricants Corrosion inhibitor Adhesion improver EP additives
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, density, viscosity DIN 51 818 ISO 2137 ISO 2811 DIN 51 562 Consistency class, NLGI1 Worked penetration Density at 20C (68F) Base oil viscosity at 40C (104F) Temperature Service temperature ISO 2176 Drop point C F C F ASTM-D147880 Low temperature torque test at -30C (-22F) Initial break-away torque Torque after 20 minutes running time DIN 51 805 Kesternich method - flow pressure at -40C (-40F) Four-ball tester DIN 51 350 T.4 DIN 51 350 T.5 Weld load Wear scar under 800N load Almen-Wieland machine OK load Resistance DIN 51 807 T.1 DIN 51 808 Water resistance, static evaluation step Oxidation resistance, pressure drop 100h, 99C (210F) bar 1-90 0.3 N 12000 N mm 3400 0.9 Nm Nm mbar 1120x10-3 220x10-3 340 -40 to +110 -40 to +230 190 374
2
Unit
Result Black 00
mm/10 g/ml mm /s
2
APPLICATION METHOD
Clean contact surfaces. Apply in the normal way using a brush, grease gun or automatic lubricating system. Can be used in centralised lubrication systems. Do not mix with other greases.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
Chain Oils
FEATURES
Lower overall maintenance costs Wider temperature range Longer oil-drain intervals Reduced lubricant consumption Extended equipment lifetime Reduced energy consumption Long life reduces lubricant usage, maintenance cost
COMPOSITION
Hydroprocessed mineral oil (MO), polyalphaolefin (PAO) and polyalphaolefin/mineral oil (PAO/MO) based lubricants.
Molykote gearbox and chain oils help prevent wear and process interruptions in power transmission systems and components. Compared to conventional oils, they also offer greater resistance to oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils maximize fill intervals and maintain viscosity characteristics at wide temperature ranges.
DESCRIPTION
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
HOW TO USE
Follow equipment manufacturers recommendations for maintenance procedures and oil specifications. To ensure the longest possible life span for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of antioxidants in lubricating fluids. Moreover, sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information.
Molykote gearbox and chain oils have a shelf life of 60 months from date of manufacture. Refer to product packaging for use-by date.
PACKAGING
Molykote gearbox and chain lubricants are available in 18.9- and 208.2-L (5- and 55-gal) containers.
LIMITATIONS
These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
Molykote lubricating fluids are kosher approved and conform to USDA listing requirements under H-1 or H-2 designations (see Typical Properties table). An H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. An H-2 designation indicates the lubricated part cannot have contact with food.
SHIPPING LIMITATIONS
None.
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Viscosity @ 100C, cSt Viscosity @ 100F, cSt Viscosity @ 210F, cSt Viscosity @ 40C, cSt Viscosity Index Flash Point, F Pour Point, C Additive Package R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW T/PPD R&O/AW T/PPD R&O/AW Density @ 20C, g/mL Density @ 20C, lb/gal
Fire Point, F
AGMA2#
USDA
Molykote brand Product Gearbox Oils1 L-0115 Gear Oil ISO 150 L-0115FG Gear Oil ISO 150 L-0122 Gear Oil ISO 220 L-0122FG Gear Oil ISO 220 L-0132 Gear Oil ISO 320 L-0146 Gear Oil ISO 460 L-0146FG Gear Oil ISO 460 L-1115 Synthetic Blend Gear Oil - ISO 150 L-1115FG Synthetic Blend Gear Oil - ISO 150 L-1122 Synthetic Blend Gear Oil - ISO 220 L-1122FG Synthetic Blend Gear Oil - ISO 220 L-1132 Synthetic Gear Oil ISO 320 L-1146 Synthetic Gear Oil ISO 460 L-1146FG Synthetic Gear Oil ISO 460 L-01681 Gear Oil L-11681 Synthetic Gear Oil Chain Oils1 L-0460FG Blend Chain Oil (ISO 68) L-1468FG Synthetic Freezer Chain Oil (ISO 68) L-1428 High Temperature
1 2
H-23 H-14 H-2 H-1 H-2 H-2 H-1 H-2 H-1 H-2 H-1 H-2 H-2 H-1 H-2 H-2
149.4 150 223 219.1 312 456.6 441.1 145 134.7 211.6 197.8 342.5 455.2 380.2 659 674
14.8 15.4 20.4 20 31 32.8 33.1 15.6 17.4 19.5 24 30.8 45.1 39.2 42 48
169.3 170.1 265.6 249.7 349.5 507.5 507.5 162 151.3 251.8 220.8 388.6 512.4 428.3 764 772.1
15.2 15.9 21 20.7 31.6 33.8 34.2 16 17.8 20.2 24.7 31.8 46.5 40.4 43 51.2
100 100 101 101 134 107 107 100 122 120 142 126 154 147 105 128
500 500 510 490 460 575 575 515 435 500 440 540 545 545 485 505
530 530 550 510 515 620 620 530 470 510 490 590 595 595 555 580
-18 -18 -18 -21 -18 -18 -18 -18 -39 -21 -33 -39 -36 -36 -21 -27
4 4 5 5 6 7 7 4 4 5 5 6 7 7 8 8
0.86 0.86 0.86 0.86 0.87 0.87 0.88 0.87 0.85 0.87 0.85 0.85 0.852 0.852 0.88 0.85
7.16 7.16 7.16 7.16 7.24 7.24 7.32 7.24 7.07 7.24 7.07 7.07 7.09 7.09 7.32 7.07
90-140 PAO/PB 140 140 140 140 PAO/PB PAO MO/PB PAO/PB
66 65.8 285
8.3 9.8 24
8.6 10 26
30 30
MO PAO POE/PB
Typical values; not for use in preparing specifications. AGMA is an acronym for American Gear Manufacturers Association. 3 The H-2 designation indicates the lubricated part cannot have contact with food. 4 The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. We help you invent the future. www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. 2003 Dow Corning Corporation. All rights reserved.
Base Oil
SAE#
Product Information
Chain Oils
FEATURES
Lower overall maintenance costs Wider temperature range Longer oil-drain intervals Reduced lubricant consumption Extended equipment lifetime Reduced energy consumption Long life reduces lubricant usage, maintenance cost
COMPOSITION
Hydroprocessed mineral oil (MO), polyalphaolefin (PAO) and polyalphaolefin/mineral oil (PAO/MO) based lubricants.
Molykote gearbox and chain oils help prevent wear and process interruptions in power transmission systems and components. Compared to conventional oils, they also offer greater resistance to oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils maximize fill intervals and maintain viscosity characteristics at wide temperature ranges.
DESCRIPTION
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
HOW TO USE
Follow equipment manufacturers recommendations for maintenance procedures and oil specifications. To ensure the longest possible life span for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of antioxidants in lubricating fluids. Moreover, sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information.
Molykote gearbox and chain oils have a shelf life of 60 months from date of manufacture. Refer to product packaging for use-by date.
PACKAGING
Molykote gearbox and chain lubricants are available in 18.9- and 208.2-L (5- and 55-gal) containers.
LIMITATIONS
These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
Molykote lubricating fluids are kosher approved and conform to USDA listing requirements under H-1 or H-2 designations (see Typical Properties table). An H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. An H-2 designation indicates the lubricated part cannot have contact with food.
SHIPPING LIMITATIONS
None.
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Viscosity @ 100C, cSt Viscosity @ 100F, cSt Viscosity @ 210F, cSt Viscosity @ 40C, cSt Viscosity Index Flash Point, F Pour Point, C Additive Package R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW T/PPD R&O/AW T/PPD R&O/AW Density @ 20C, g/mL Density @ 20C, lb/gal
Fire Point, F
AGMA2#
USDA
Molykote brand Product Gearbox Oils1 L-0115 Gear Oil ISO 150 L-0115FG Gear Oil ISO 150 L-0122 Gear Oil ISO 220 L-0122FG Gear Oil ISO 220 L-0132 Gear Oil ISO 320 L-0146 Gear Oil ISO 460 L-0146FG Gear Oil ISO 460 L-1115 Synthetic Blend Gear Oil - ISO 150 L-1115FG Synthetic Blend Gear Oil - ISO 150 L-1122 Synthetic Blend Gear Oil - ISO 220 L-1122FG Synthetic Blend Gear Oil - ISO 220 L-1132 Synthetic Gear Oil ISO 320 L-1146 Synthetic Gear Oil ISO 460 L-1146FG Synthetic Gear Oil ISO 460 L-01681 Gear Oil L-11681 Synthetic Gear Oil Chain Oils1 L-0460FG Blend Chain Oil (ISO 68) L-1468FG Synthetic Freezer Chain Oil (ISO 68) L-1428 High Temperature
1 2
H-23 H-14 H-2 H-1 H-2 H-2 H-1 H-2 H-1 H-2 H-1 H-2 H-2 H-1 H-2 H-2
149.4 150 223 219.1 312 456.6 441.1 145 134.7 211.6 197.8 342.5 455.2 380.2 659 674
14.8 15.4 20.4 20 31 32.8 33.1 15.6 17.4 19.5 24 30.8 45.1 39.2 42 48
169.3 170.1 265.6 249.7 349.5 507.5 507.5 162 151.3 251.8 220.8 388.6 512.4 428.3 764 772.1
15.2 15.9 21 20.7 31.6 33.8 34.2 16 17.8 20.2 24.7 31.8 46.5 40.4 43 51.2
100 100 101 101 134 107 107 100 122 120 142 126 154 147 105 128
500 500 510 490 460 575 575 515 435 500 440 540 545 545 485 505
530 530 550 510 515 620 620 530 470 510 490 590 595 595 555 580
-18 -18 -18 -21 -18 -18 -18 -18 -39 -21 -33 -39 -36 -36 -21 -27
4 4 5 5 6 7 7 4 4 5 5 6 7 7 8 8
0.86 0.86 0.86 0.86 0.87 0.87 0.88 0.87 0.85 0.87 0.85 0.85 0.852 0.852 0.88 0.85
7.16 7.16 7.16 7.16 7.24 7.24 7.32 7.24 7.07 7.24 7.07 7.07 7.09 7.09 7.32 7.07
90-140 PAO/PB 140 140 140 140 PAO/PB PAO MO/PB PAO/PB
66 65.8 285
8.3 9.8 24
8.6 10 26
30 30
MO PAO POE/PB
Typical values; not for use in preparing specifications. AGMA is an acronym for American Gear Manufacturers Association. 3 The H-2 designation indicates the lubricated part cannot have contact with food. 4 The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. We help you invent the future. www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. 2003 Dow Corning Corporation. All rights reserved.
Base Oil
SAE#
Product Information
Chain Oils
FEATURES
Lower overall maintenance costs Wider temperature range Longer oil-drain intervals Reduced lubricant consumption Extended equipment lifetime Reduced energy consumption Long life reduces lubricant usage, maintenance cost
COMPOSITION
Hydroprocessed mineral oil (MO), polyalphaolefin (PAO) and polyalphaolefin/mineral oil (PAO/MO) based lubricants.
Molykote gearbox and chain oils help prevent wear and process interruptions in power transmission systems and components. Compared to conventional oils, they also offer greater resistance to oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils maximize fill intervals and maintain viscosity characteristics at wide temperature ranges.
DESCRIPTION
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
HOW TO USE
Follow equipment manufacturers recommendations for maintenance procedures and oil specifications. To ensure the longest possible life span for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of antioxidants in lubricating fluids. Moreover, sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information.
Molykote gearbox and chain oils have a shelf life of 60 months from date of manufacture. Refer to product packaging for use-by date.
PACKAGING
Molykote gearbox and chain lubricants are available in 18.9- and 208.2-L (5- and 55-gal) containers.
LIMITATIONS
These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
Molykote lubricating fluids are kosher approved and conform to USDA listing requirements under H-1 or H-2 designations (see Typical Properties table). An H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. An H-2 designation indicates the lubricated part cannot have contact with food.
SHIPPING LIMITATIONS
None.
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Viscosity @ 100C, cSt Viscosity @ 100F, cSt Viscosity @ 210F, cSt Viscosity @ 40C, cSt Viscosity Index Flash Point, F Pour Point, C Additive Package R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW T/PPD R&O/AW T/PPD R&O/AW Density @ 20C, g/mL Density @ 20C, lb/gal
Fire Point, F
AGMA2#
USDA
Molykote brand Product Gearbox Oils1 L-0115 Gear Oil ISO 150 L-0115FG Gear Oil ISO 150 L-0122 Gear Oil ISO 220 L-0122FG Gear Oil ISO 220 L-0132 Gear Oil ISO 320 L-0146 Gear Oil ISO 460 L-0146FG Gear Oil ISO 460 L-1115 Synthetic Blend Gear Oil - ISO 150 L-1115FG Synthetic Blend Gear Oil - ISO 150 L-1122 Synthetic Blend Gear Oil - ISO 220 L-1122FG Synthetic Blend Gear Oil - ISO 220 L-1132 Synthetic Gear Oil ISO 320 L-1146 Synthetic Gear Oil ISO 460 L-1146FG Synthetic Gear Oil ISO 460 L-01681 Gear Oil L-11681 Synthetic Gear Oil Chain Oils1 L-0460FG Blend Chain Oil (ISO 68) L-1468FG Synthetic Freezer Chain Oil (ISO 68) L-1428 High Temperature
1 2
H-23 H-14 H-2 H-1 H-2 H-2 H-1 H-2 H-1 H-2 H-1 H-2 H-2 H-1 H-2 H-2
149.4 150 223 219.1 312 456.6 441.1 145 134.7 211.6 197.8 342.5 455.2 380.2 659 674
14.8 15.4 20.4 20 31 32.8 33.1 15.6 17.4 19.5 24 30.8 45.1 39.2 42 48
169.3 170.1 265.6 249.7 349.5 507.5 507.5 162 151.3 251.8 220.8 388.6 512.4 428.3 764 772.1
15.2 15.9 21 20.7 31.6 33.8 34.2 16 17.8 20.2 24.7 31.8 46.5 40.4 43 51.2
100 100 101 101 134 107 107 100 122 120 142 126 154 147 105 128
500 500 510 490 460 575 575 515 435 500 440 540 545 545 485 505
530 530 550 510 515 620 620 530 470 510 490 590 595 595 555 580
-18 -18 -18 -21 -18 -18 -18 -18 -39 -21 -33 -39 -36 -36 -21 -27
4 4 5 5 6 7 7 4 4 5 5 6 7 7 8 8
0.86 0.86 0.86 0.86 0.87 0.87 0.88 0.87 0.85 0.87 0.85 0.85 0.852 0.852 0.88 0.85
7.16 7.16 7.16 7.16 7.24 7.24 7.32 7.24 7.07 7.24 7.07 7.07 7.09 7.09 7.32 7.07
90-140 PAO/PB 140 140 140 140 PAO/PB PAO MO/PB PAO/PB
66 65.8 285
8.3 9.8 24
8.6 10 26
30 30
MO PAO POE/PB
Typical values; not for use in preparing specifications. AGMA is an acronym for American Gear Manufacturers Association. 3 The H-2 designation indicates the lubricated part cannot have contact with food. 4 The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. We help you invent the future. www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. 2003 Dow Corning Corporation. All rights reserved.
Base Oil
SAE#
Product Information
Chain Oils
FEATURES
Lower overall maintenance costs Wider temperature range Longer oil-drain intervals Reduced lubricant consumption Extended equipment lifetime Reduced energy consumption Long life reduces lubricant usage, maintenance cost
COMPOSITION
Hydroprocessed mineral oil (MO), polyalphaolefin (PAO) and polyalphaolefin/mineral oil (PAO/MO) based lubricants.
Molykote gearbox and chain oils help prevent wear and process interruptions in power transmission systems and components. Compared to conventional oils, they also offer greater resistance to oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils maximize fill intervals and maintain viscosity characteristics at wide temperature ranges.
DESCRIPTION
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
HOW TO USE
Follow equipment manufacturers recommendations for maintenance procedures and oil specifications. To ensure the longest possible life span for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of antioxidants in lubricating fluids. Moreover, sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information.
Molykote gearbox and chain oils have a shelf life of 60 months from date of manufacture. Refer to product packaging for use-by date.
PACKAGING
Molykote gearbox and chain lubricants are available in 18.9- and 208.2-L (5- and 55-gal) containers.
LIMITATIONS
These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
Molykote lubricating fluids are kosher approved and conform to USDA listing requirements under H-1 or H-2 designations (see Typical Properties table). An H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. An H-2 designation indicates the lubricated part cannot have contact with food.
SHIPPING LIMITATIONS
None.
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Viscosity @ 100C, cSt Viscosity @ 100F, cSt Viscosity @ 210F, cSt Viscosity @ 40C, cSt Viscosity Index Flash Point, F Pour Point, C Additive Package R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW R&O/AW T/PPD R&O/AW T/PPD R&O/AW Density @ 20C, g/mL Density @ 20C, lb/gal
Fire Point, F
AGMA2#
USDA
Molykote brand Product Gearbox Oils1 L-0115 Gear Oil ISO 150 L-0115FG Gear Oil ISO 150 L-0122 Gear Oil ISO 220 L-0122FG Gear Oil ISO 220 L-0132 Gear Oil ISO 320 L-0146 Gear Oil ISO 460 L-0146FG Gear Oil ISO 460 L-1115 Synthetic Blend Gear Oil - ISO 150 L-1115FG Synthetic Blend Gear Oil - ISO 150 L-1122 Synthetic Blend Gear Oil - ISO 220 L-1122FG Synthetic Blend Gear Oil - ISO 220 L-1132 Synthetic Gear Oil ISO 320 L-1146 Synthetic Gear Oil ISO 460 L-1146FG Synthetic Gear Oil ISO 460 L-01681 Gear Oil L-11681 Synthetic Gear Oil Chain Oils1 L-0460FG Blend Chain Oil (ISO 68) L-1468FG Synthetic Freezer Chain Oil (ISO 68) L-1428 High Temperature
1 2
H-23 H-14 H-2 H-1 H-2 H-2 H-1 H-2 H-1 H-2 H-1 H-2 H-2 H-1 H-2 H-2
149.4 150 223 219.1 312 456.6 441.1 145 134.7 211.6 197.8 342.5 455.2 380.2 659 674
14.8 15.4 20.4 20 31 32.8 33.1 15.6 17.4 19.5 24 30.8 45.1 39.2 42 48
169.3 170.1 265.6 249.7 349.5 507.5 507.5 162 151.3 251.8 220.8 388.6 512.4 428.3 764 772.1
15.2 15.9 21 20.7 31.6 33.8 34.2 16 17.8 20.2 24.7 31.8 46.5 40.4 43 51.2
100 100 101 101 134 107 107 100 122 120 142 126 154 147 105 128
500 500 510 490 460 575 575 515 435 500 440 540 545 545 485 505
530 530 550 510 515 620 620 530 470 510 490 590 595 595 555 580
-18 -18 -18 -21 -18 -18 -18 -18 -39 -21 -33 -39 -36 -36 -21 -27
4 4 5 5 6 7 7 4 4 5 5 6 7 7 8 8
0.86 0.86 0.86 0.86 0.87 0.87 0.88 0.87 0.85 0.87 0.85 0.85 0.852 0.852 0.88 0.85
7.16 7.16 7.16 7.16 7.24 7.24 7.32 7.24 7.07 7.24 7.07 7.07 7.09 7.09 7.32 7.07
90-140 PAO/PB 140 140 140 140 PAO/PB PAO MO/PB PAO/PB
66 65.8 285
8.3 9.8 24
8.6 10 26
30 30
MO PAO POE/PB
Typical values; not for use in preparing specifications. AGMA is an acronym for American Gear Manufacturers Association. 3 The H-2 designation indicates the lubricated part cannot have contact with food. 4 The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. We help you invent the future. www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. 2003 Dow Corning Corporation. All rights reserved.
Base Oil
SAE#
Product Information
FEATURES
x High oxidation resistance x Wide service temperature range (-65C to 175C) x Compatable with most plastics x Good corrosion protection
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Standard* Parameter Unit Appearance Base oil viscosity at 25C mm/s JIS K 2220 Penetration (worked 60 times) mm/10 NLGI class Service temperature range C Density g/cm JIS K 2220 Drop point C Fed Std 791 Bleed (150C/24 hours) % Fed Std 791 Evaporation (150C/24 hours) % JIS K 2220 Oxidation resistance (99C/500 hours) MPa JIS K 2220 Water washout (38C/1 hour) % DIN 51 802 Emcor corrosion test *JIS: Japanese Industrial Standard. Fed Std: Federal Standard DIN: Deutsches Industrie Norm. Result off-white 100 300 to 340 1 -65 to 175 1.0 220 3.0 1.4 0.01 4.2 0
COMPOSITION
x Silicone oil x Ester x Lithium soap
HOW TO USE
Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device. Compatibility with plastics may vary depending on the type and grade of the plastic. Performs adequate compatibility testing in advance. This grease is not compatible with silicone rubber.
HANDLING PRECAUTIONS
This product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling.
PACKAGING
This product is available in 5kg cans. CAUTION 1. Data included in this document are average values, not specification values. Any applications for this product given in this document are merely examples. Perform thorough evaluations to confirm functionality, effectiveness, and safety before use. 2. No guarantees are made that the applications described in this document are free from infringements of any patent. 3. This product was developed for industrial use, and is not intended for use in medical equipment, pharmaceutical products, etc. 4. Be sure to read the material safety data sheet (MSDS) and container label for this product before use. 5. Contact Dow Corning Asia, Ltd., before reproducing any data from this document.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2006 Dow Corning Corporation. All rights reserved.
Product Information
APPLICATION
Spur gear systems, load chains, settling shims, springs, shaft-hub connection, encapsulated joints, gears, linear motion guides.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Beige 1 310-340 1.12 115 -25 to +120 155
COMPOSITION
Mineral oil Lithium soap Adhesion improver Solid lubricants
Temperature
ISO 2176 Service temperature Drop point
Resistance
DIN 51 808 Oxidation resistance, pressure drop 100h, bar 99C
Corrosion protection
DIN 51 802 Emcor method 0-1
Coefficient of friction
Steel ball against plastic surface (POM) ball = 12.7mm, load = 6.3N, v = 10mm/s, 24h 0.08
Environment and Regulatory Affairs specialists available in each area. For further information, please consult your local Dow Corning representative.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in 1kg cans, 400g cartridges and 5kg drums.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Product Information
Specialty Lubricants
FEATURES
" Extremely high load-carrying capacity " Wear protection and reduction of existing pitting in gear teeth flanks during operation, due to the solid lubricants incorporated in the grease. Extremely adhesive due to build-in adhesion improver " Good protection against corrosion (corrosion index 0 when tested using the SKF-Emcor method) " Contains no lead or nickel
c d
Gearwheel grease for the lubrication of highly stressed open gears and reducing gears made of metal, with a peripheral speed of up to 2.5 m/s APPLICATIONS
" Open gears that are subjected to high stresses and bad weather effects. " Successfully used in crushing plants and in transmission gears and threaded spindles of heavy, crank-driven presses.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, density, viscosity ISO 2137 ISO 2811 DIN 51 562 Unworked penetration Density at 20C (68F) Base oil viscosity at 40C (104F)1 Temperature Service temperature range ISO 2176 Drop point C F C F ASTMD147880 Low temperature torque test at -20C (-4F) Break-away torque Torque after 20 minutes running time DIN 51 805 Nm Nm 880x10-3 115x10-3 1350 -25 to +120 -13 to +248 175 347 mm/10 240-270 g/ml mm2/s 0.96 320 Unit Result Black
COMPOSITION
" " " " " "
Mineral oil Lithium soap Solid lubricants Corrosion inhibitor Adhesion improver EP additives
Kesternich method - flow pressure at -20C (-4F) mbar Loading capacity, protection against wear, service life Four-ball tester
DIN 51 350 T.4 Weld load DIN 51 350 T.5 Wear scar under 800N load Almen-Wieland machine OK load Frictional force with OK load Corrosion protection DIN 51 802 SKF-Emcor method Degree of corrosion Resistance DIN 51 807 T.1 Water resistance, static evaluation step DIN 51 808 Oxidation resistance, pressure drop 100h, 99C (210F)
N mm N N
PACKAGING
Carefully clean the metal surfaces and apply using a spatula or brush.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
Solid lubricants Organic binder Solvent
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Dark grey s g/ml % 42 1.16 41
Physical properties
DIN 53211/3 DIN 53217/2 CTM 0242 I Viscosity at 20C (DIN3 cup) Density at 20C Non-volatile content
Temperature
Curing time Curing time Service temperature range ASTM-D2625 ASTM-D2714 Falex load-carrying capacity LFW-1, rotating F=2860N, n=72 minutes, v=7.9m/minutes no. of revolutions x1000 to =0.1 LFW-1, oscillating F=900N, frequency=89.5osc./minutes no. of oscillations to =0.08 minutes/C 60/150 minutes/C 30/180 C -70 to +250 N p=13600* s=11300* p=187*
ASTM-D2714
p=409*
Corrosion protection
ISO/R 1456 Salt spray test h 2 1. * Surface:p = phosphatized, s = sand-blasted. * CTM: Corporate Test Method, copies of CTMs are available on request. ASTM: American Society for Testing and Materials. DIN: Deutsche Industrie Norm
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20m.
Curing
60 minutes at 150C, 30 minutes at 180C (Object temperature).
Solubility
Thinning can be carried out using MOLYKOTE L 13 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
19/11/1998 DC 2935
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
FEATURES
Lower overall maintenance costs Wider temperature range Longer oil-drain intervals Reduced lubricant consumption Extended equipment lifetime Reduced energy consumption Long life reduces lubricant usage, maintenance cost
DESCRIPTION
Molykote multi-purpose oils provide protection and lubrication for a wide range of moving components in industrial systems. Depending on the application, your Dow Corning representative can help you select the right oil from a range of viscosities, additive packages.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
COMPOSITION
Hydrocracked Mineral oil (MO) based lubricants
HOW TO USE
Follow equipment manufacturers recommendations for maintenance procedures and oil specifications. To ensure the longest possible life for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of antioxidants in lubricating fluids. Sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information.
PACKAGING
Molykote multi-purpose oils are available in 18.9- and 208.2-L (5- and 55-gal) containers.
SHIPPING LIMITATIONS
None.
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Viscosity @ 100C, cSt Viscosity @ 100F, cSt Viscosity @ 210F, cSt Viscosity @ 40C, cSt USDA/NSF status Additive Package R&O/AW RO R&O/AW R&O/AW Density @ 20C, g/mL Density @ 20C, lb/gal 7.13 7.22 7.29 7.21 Viscosity Index Flash Point, F
Pour Point, F
Fire Point, F
ISO Grade
Molykote brand Product Multi-Purpose Oils1 L-0532FG Multi Purpose Light Oil2 L-0568 Multi Purpose Oil
2
32 68 100 100
MO MO MO MO
Typical values; not for use in preparing specifications. The oil date is also displayed in the Molykote Hydraulic Oils Data Sheet.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. We help you invent the future. www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning and Molykote are registered trademarks of Dow Corning Corporation. 2003 Dow Corning Corporation. All rights reserved.
Base Oil
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Test Color Temperature range DIN 51562 Viscosity at 40C (104F) Unit C F mm/s Result Transparent -55 to +220 +14 to +482 <50
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
representative.
23/10/2000 DC 4400
MOLYKOTE is a registered trademark of Dow Corning Corporation. 2000, 2001 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
Greaselike silicone fluid thickened with metal oxide filler
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Test Color ASTM D 217 Consistency, Penetration unworked worked 60 strokes worked 100,000 strokes Fed. Std. 791, Bleed after 24 hr at 392F (200C) Method 321.2 Fed. Std. 791, Evaporation after 24 hr at 392F (200C) Method 321.2 ASTM D 2265 Drop Point ASTM D 1475 Specific Gravity at 77F (25C) Thermal Conductivity, K Factor CTM1 0069 ASTM D 149 Dielectric Strength2 ASTM D 495 Arc Resistance ASTM D 150 Dielectric Constant, at 100 Hz at 100 kHz ASTM D 150 Dissipation Factor, at 100 Hz at 100 kHz ASTM D 1169 Volume Resistivity ASTM D 4049 Water Spray Off
1 2
Method
Unit
570 (300) 2.1 cal/sec-cm-C 0.0014 volts/mil 210 seconds 165 5 5 0.01 0.02 2 x 1015 1.3
ohm-cm percent
CTMs (Corporate Test Methods) correspond to standard ASTM tests in most instances. Measured using a sample thickness of 50 mils.
DESCRIPTION
Dow Corning 340 Heat Sink Compound is a grease-like silicone material, heavily filled with heat conductive metal oxides. This combination promotes high thermal conductivity, low bleed and high-temperature stability.
The compound resists changes in consistency at temperatures up to approximately 350F (177C). In doing so, it helps maintain a positive heat sink seal to improve heat transfer from the electrical/electronic device to the heat sink or chassis, thereby increasing overall efficiency of the device.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE FROM YOUR DOW CORNING REPRESENTATIVE, OR DISTRIBUTOR, OR BY CALLING YOUR GLOBAL DOW CORNING CONNECTION.
PACKAGING
Dow Corning 340 Heat Sink Compound is available in 5-oz (142-g) tubes, 13.5-oz (383-g) weight/ 5.75-fl oz (170-mL) volume Semco cartridges, 20-lb (9-kg) pails, and 275-lb (124.7-kg) drums for production lines and large scale operations. All weights, net.
information should not be used in substitution for customers tests to ensure that Dow Cornings products are safe, effective, and fully satisfactory for the intended end use. Dow Cornings sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
SHIPPING LIMITATIONS
None.
WARRANTY INFORMATION
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this
AGP5223
Dow Corning is a registered trademark of Dow Corning Corporation. 1997, 1999, 2000 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
Silicone oil Inorganic thickener
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Physical nature Penetration, unworked Penetration, worked 60, max. Bleed, 24 hours; 200C Evaporation, 24 hours; 200C Melting point Unit White to grey, translucent Stiff compound 175 to 210 260 <0.5 <2.0 None
mm/10 mm/10 % % C
High-Vacuum Grease should always be tested before the material is adopted for regular use.
HANDLING PRECAUTIONS
In case of eye contact, flush eyes with water. PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL
Chemical resistance
DOW CORNING High-Vacuum Grease is unaffected by most vegetable and minerals oils, many organic compounds, and most common gases. It is also resistant to most aqueous solutions of inorganic salts and to dilute acids and alkalies. The suitability of DOW CORNING
warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Product Information
Specialty Lubricants
FEATURES
" Low evaporation " High oxidation resistance " Wide service temperature range, -30C to +230C (-22F to +446F) " High resistance to water and water washout " Resistant to most solvents and chemicals " Compatible with many plastics and elastomers
c d
Lubricating and sealing grease for metal/metal, metal/plastic and metal/elastomer combinations involving slow movements and heavy loadings over very wide temperature ranges, particularly under unfavorable environmental influences APPLICATIONS
" Suitable for the above friction contacts and service conditions. " Successfully used on valves, mechanical seals and pumps, ball-and socket-joints, bearings, on loading arms for ships and vacuum contained equipment.
COMPOSITION
" Fluorosilicone oil " PTFE thickener
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, density, viscosity DIN 51 818 ISO 2137 ISO 2811 NLGI consistency class Worked penetration Density at 20C (68F) Base oil viscosity at 25C (77F) Temperature Service temperature ISO 2176 Drop point C F C F ASTM-D147880 Low temperature torque test at -20C (-4F) Initial break-away torque Torque after 20 minutes running time DIN 51 805 Kesternich method - flow pressure at -20C (-4F) Four-ball tester (VKA) DIN 51 350 pt.4 Weld load Almen-Wieland machine OK load Frictional force with OK load Resistance DIN 51 807 pt.1 Water resistance, static evaluation step DIN 51 808 Oxidation resistance, pressure drop 100h, 99C (210F) bar 0-90 0.0 N N 15500 3500 N 4400 Nm Nm mbar 392x10-3 94x10-3 280 -30 to +230 -22 to +446 >220 >428 mm/10 g/ml mm2/s 2-3 240-280 1.47 10000 Unit Result White
PACKAGING
Clean bearing surfaces. Apply grease in the normal way using a brush or grease gun. Do not mix with other greases. Due to variation in quality of plastics and elastomers, compatibility tests should be carried out for swelling and shrinkage, stress-crack formation, and changes in strength and hardness.
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
HANDLING PRECAUTIONS
Hands should be washed before eating, drinking or smoking. Avoid contact with the eyes and skin. Traces of toxic trifluoropropionaldehyde may be formed at temperatures of >150C (>302F). Adequate ventilation must be provided in enclosed spaces. At temperatures above 290C (554F), fluorine and hydrogen fluoride may be evoked. Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1999-2002 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
Silicone oil Inorganic thickener Additives
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Parameter Physical nature Color ISO 2137 ISO 2137 CTM 0033A CTM 0033A Penetration unworked Penetration, worked 60, max. Bleed 24 hours/200C (392F), max. Evaporation 24 hours/200C (392F), max. Melting point mm/10 mm/10 % % C F Unit Value Stiff compound White to light grey, translucent 175 to 210 260 0.5 2.0 None None
* CTM: Corporate Test Method, copies of CTMs are available on request. ISO: International Standardisation Organisation
by dispersing in solvents such as xylene, mineral spirits and methyl ethyl ketone. DOW CORNING 111 Silicone Compound can then be applied by brushing, dipping or spraying. DOW CORNING 111 Silicone Compound should not be applied to any surface which will be painted or finished. Such coatings may not
adhere to the silicone-treated surface. If contaminated by a silicone coating, parts can be wiped or washed with solvent, washed with detergent, or immersed in an alcoholic potassium hydroxide solution and then rinsed in clear water before painting.
Solubility
DOW CORNING 111 Silicone Compound is insoluble in water, methanol, ethanol, or mineral oil, and soluble in Chlorothene NU*, perchloroethylene, mineral spirits and methyl ethyl ketone. The greater the consistency (lower penetration value), the lower the solubility of the specific silicone compound. The suitability of the particular solvent should be based on testing prior to regular use. Flammability and toxicological properties should be important considerations in the choice of a solvent.
BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent. * Chlorothene NU is a registered trademark of the Dow Chemical Company.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
Chemical resistance
DOW CORNING 111 Silicone Compound is not greatly affected by mineral oils, vegetable oils or air. It is generally resistant to dilute acids and alkalines, and to most aqueous solutions. DOW CORNING 111 Silicone Compound is quite resistant to a wide variety of organic and inorganic chemicals. Because each application may vary in chemical composition, pressure, flow velocity, relubrication requirements and equipment design, it is recommended that the silicone compound be tested before adopting for regular use. DOW CORNING 111 Silicone Compound is not to be used with liquid oxygen and should not be used in applications requiring LOX compatibility.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HANDLING PRECAUTIONS
DOW CORNING 111 Silicone Compound may cause temporary discomfort when in direct contact with eyes. In case of eye contact, flush eyes with water. PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED.
2 Ref. no. 22-1087C-01
Product Information
Lubricating grease for plastic/plastic and plastic/metal combinations with slow to medium-fast movements and light loads APPLICATION
Used on vehicle track-rod joints.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard Test Color Unit Result Beige Approx. 2 270-300 0.86 32 -40 to +130 >190 222x10 36x10 280
COMPOSITION
Mineral oil Polyalphaolefine Lithium soap Solid lubricants
Temperature
Service temperature ISO 2176 Drop point ASTM-D147880 Low temperature torque test at -30C Initial break-away torque Torque after 20 minutes running time DIN 51 805 Kesternich method - flow pressure at -20C Four-ball tester (VKA) DIN 51 350 pt.4 Weld load DIN 51 350 pt.5 Wear scar under 400N load
Coefficient of friction
Steel ball against plastic surface (POM) dia (ball) = 12.7mm; load = 5N; v = 10cm/s, 24h, =
Corrosion protection
DIN 51 802 SKF-Emcor method Degree of corrosion 1-2 % % % 4.8 2.4 0.2
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
30/11/1998 DC 3000
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
PTFE Binder Solvent Ultra-Violet indicator
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Colorless s g/ml % months C min min/C 12 0.87 23 24 -180 to +240 5-10 120/20 b=6 p=30 s=10
Physical properties
DIN 53211/4 DIN 53217/2 Viscosity at 20C (DIN4 cup) Density at 20C Solid content Storage life
Temperature
Service temperature range Drying time at 20C Curing time ASTM-D2714 LFW-1, rotating F=680 N, n=72 min, v=7.9 m/minute no. of revolutions x1000 to =0.1
1. Calculated value. 2. Surface pretreatment: b = blank, p = phosphated, s = sand blasted. * ASTM: American Society for Testing and Materials. DIN: Deutsche Industrie Norm.
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20m.
Curing
120 minutes at 20C
Solubility
Thinning can be carried out using MOLYKOTE L13 Thinner.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
www.dowcorning.com
25/10/2001 DC 3730
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Transparent g/ml s 0.85 12.5
COMPOSITION
Mineral oil Solid lubricants Stabilizers Solvent Corrosion inhibitor
Density, viscosity
ISO 2811 4 DIN 53 211 Density at 20C Viscosity
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area. For further information, please consult your local Dow Corning representative.
13/11/1998 DC 3003
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" " " " " " " "
c d
Solid lubricant paste used in the assembly and fitting of a wide range of components such as metal threaded connections APPLICATIONS
" Suitable for a wide range of applications in the chemical, petrochemical, paper and automotive industry, and in engineering, wood and plastic processing. " Used on bolted connections, sliding contact bearings, linear sliding guides, splined shafts, press-fit joints, exhaust bolts, spark plug threads, flanges and flange seals, door hinges, brake mechanisms and plate springs.
Metal-free Good corrosion protection High load-carrying capacity Coefficient of friction is of the same order as for oiled bolts Low scattering of pre-tensioning force Prevention of stress cracking and brittleness Wide service temperature range Wear reduction
TYPICAL PROPERTIES
COMPOSITION
" " " "
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Physical properties Color ISO 2137 DIN 2811 Unworked penetration Density at 20C Base oil viscosity at 40C Service temperature range mm/10 g/ml mm2/s C Grayish black 280-310 1.21 65 -40 to +200 as a paste, to +1500 dry lubrication None Approx. 400 2.8 120 Unit Result
Drop point Flow pressure at -40C Oil separation, 7 days, 40C Corrosion protection Salt spray test at 50m thickness
C mbar % h
Load-carrying capacity, wear protection, service life DIN 51 350 pt.4 Four-ball tester Weld load DIN 51 350 pt.5 Four-ball tester Wear scar at 800N load SRV test, type Optimol ball/plane, load 300N endurance test, friction coefficient Step load test, max. load Wear scar Coefficient of friction Pressfit Screw test: Erichsen Friction coefficient in bolt connection M-12 alloy 1.7709 Alloy Sopral P 40 aluminium thread 0.117 head 0.078 thread 0.13 head 0.094 0.14 N mm mm 1.1 0.10 1200 0.74 N 4800
Sopral 60 aluminium M-12, break away torque Nm after 21h at 300C Resistance against water DIN 51807 Part 1 Water resistance at 40C
0 0-1
SPECIFICATIONS
General Motors (Opel) B0401264 Volkswagen TL 52112 No. B7217 Complies with General Electric TIL 1117-3RI Complies with EDF-PMUC 04034 Complies with Pratt & Whitney PWA-36246
When stored at or below 20C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
If possible, clean the thread and used bolts with a wire brush. Spread an adequate amount of the paste on the contact areas in order to obtain a good seal. An excess is not harmful. In order not to alter the properties, the paste must not be mixed with greases or oils. Use spray can in order to apply the product more quickly and cleanly to larger areas or poorly accessible places. Can be applied via centralized lubrication system.
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
c d
High performance grease for plastic/plastic and plastic/metal combinations involving slow to medium-fast movements and light to medium loadings APPLICATIONS
" Suitable for friction contacts with low to medium loadings and speeds which have to remain serviceable through a wide temperature range. " Used on control cables, water pumps, bearing bushes, gearwheels, slideways and other plastic parts in domestic appliances, toys and electrical appliances.
COMPOSITION
" Silicone oil " Lithium complex thickener
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, density, viscosity DIN 51 818 ISO 2137 ISO 2811 DIN 51 562 NLGI consistency class Worked penetration Density at 20C (68F) Base oil viscosity at 25C (77F) Temperature Service temperature ISO 2176 Drop point C F C F ASTM-D147880 Low temperature torque test at -20C (-4F) Initial break-away torque Torque after 20 minutes running time DIN 51 805 Nm Nm 39x10-3 15x10-3 210 -50 to +190 -58 to 374 250 482 g/ml mm /s
2
Unit
Result White 2
Kesternich method - flow pressure at -20C (-4F) mbar Load-carrying capacity, wear protection, service life Four-ball tester (VKA)
DIN 51 350 pt.4 Weld load Resistance DIN 51 808 Oxidation resistance, pressure drop 100h, 99C (210.2F) Corrosion protection DIN 51 802 SKF-Emcor method Degree of corrosion
N bar
1600 0.1
How to apply
Clean points of contact. Apply in same way as lubricating greases, using brush, spatula, grease-gun or automatic lubricating device. Suitable for delivery by central lubricating system. In the event of long breaks in service, e.g. overnight, the pressure in the delivery equipment should be relieved. Not to be mixed with other greases. Because of variation in quality of plastics and elastomers, compatibility tests should be carried out for swelling and shrinkage, stress-crack formation, and changes in strength and hardness.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
Specialty Lubricants
FEATURES
" High oxidation resistance " Low evaporation " Wide service temperature range -50C to 180C (-58F to 356F) " Good low temperature performance " Low coefficient of friction " Very good corrosion protection " Excellent compatibility with most plastics and rubbers
c d
High performance grease for plastic/plastic, plastic/metal and rubber/metal combinations involving slow to medium-fast movements and light to medium loadings APPLICATIONS
" Suitable for lubrication points with low to medium loadings and speeds. " Used in brake boosters, brake-caliper guide bolts, silent block bushings, video and audio cassettes, water-pump packing, control cables and on sliding-contact surfaces of washing machines and dishwashers.
TYPICAL PROPERTIES
COMPOSITION
" " " "
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Consistency, Density, Viscosity DIN 51 818 ISO 2137 ISO 2811 DIN 51 562 NLGI consistency class Worked penetration Density at 20C (68F) Base oil viscosity at 25C (77F) Temperature Service temperature ISO 2176 Dropping point C F C F ASTM D147880 Low temperature torque at -50C (-58F) Initial break-away torque Torque after 20 minutes running time DIN 51 805 DIN 51 808 DIN 51 802 Resistance, Corrosion Oxidation resistance, pressure drop after 100h, 99C (210F) SKF-Emcor corrosion protection Coefficient of friction Steel ball against plastic surface (POM) ball = 12.7mm, load = 6.3N, v = 10mm/s, running time 24h, = * DIN: Deutsche Industrie Norm. ISO: International Standardisation Organisation. <0.04 bar 0.1 0-1 Nm Nm <120x10-3 <90x10-3 <800 -50 to +180 -58 to +356 >250 >482 g/ml mm /s
2
Unit
HOW TO USE
Clean points of contact. Apply in same way as lubricating greases, using brush, spatula or automatic lubrication device. Can be used in central lubrication systems.
PACKAGING
This product is available in various container sizes. Detailed information on container size should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers' tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. WE HELP YOU INVENT THE FUTURE."
When stored at or below 20C (68F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
www.dowcorning.com
WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation. Dow Corning and MOLYKOTE are registered trademarks of Dow Corning Corporation. 1997-2002 Dow Corning Corporation. All rights reserved.
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Test Color Temperature range DIN 51562 Viscosity at 40C (104F) Unit C F mm/s Result Transparent -55 to +220 +14 to +482 <50
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
representative.
23/10/2000 DC 4400
MOLYKOTE is a registered trademark of Dow Corning Corporation. 2000, 2001 Dow Corning Corporation. All rights reserved.
Product Information
COMPOSITION
Mineral oil Adhesion improver Solvent Corrosion inhibitors Propellant
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Bright, transparent g/ml mm/s 0.83 3.6
Density, viscosity
ISO 2811 DIN 51 562 Density at 20C Viscosity at 40C
Corrosion protection
ISO/R 1456 Salt spray test * ISO: International Standardisation Organisation DIN: Deutsche Industrie Norm
HANDLING PRECAUTIONS
Spray can - Aerosol propellant: CO. Pressurised container - protect from sunlight and do not expose to temperatures exceeding 50C. Do not pierce or burn, even after use. Do not spray on a naked flame or any incandescent material. Combustible.
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Product Information
Light-colored adhesive grease-paste with solid lubricants for metallic friction combinations APPLICATIONS
Sliding surfaces exposed to high pressure loadings and subject to the influence of water of metal machining emulsions. Recommended and successfully used by leading clamping-element manufacturers, especially for chucks on metal processing machines.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Standard* Test Color Unit Result Light beige mm/10 g/ml C C 265-300 1.19 -25 to +250 125
COMPOSITION
Mineral oil Synthetic oil Lithium soap Solid lubricants Adhesion improver
Temperature
ISO 2176 ASTMD-1478-80 Service temperature Drop point Low temperature torque test at -20C Initial break-away torque Torque after 20 minutes running time Kesternich method - flow pressure at -20C
DIN 51 805
Nm Nm mbar
Coefficient of friction
Press-Fit test =
Resistance
DIN 51 807 pt.1 Water resistance, static
Corrosion protection
DIN 51 802 SKF-Emcor method Degree of corrosion 0-1
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
30/11/1998 DC 3632
MOLYKOTE is a registered trademark of Dow Corning Corporation. 1997-2001 Dow Corning Corporation. All rights reserved.
Dow Corning
Bearing Grease
The Number-One Choice When Clean Really Counts in Grease.
Dow Corning White EP Bearing Grease1 is a high-performance grease with a mineral oil base. It is thickened with an aluminum complex and contains white solid lubricants. Designed as a clean, food-grade alternative to common black greases, Dow Corning White EP Bearing Grease offers high performance and high-load capability.
AV01269
White EP
AV01722
Features
Clean, white appearance High-performance capability Excellent lubricating properties Good resistance to water washout High load-carrying capacity Meets FDA Regulation 21 CFR 178.3570 and USDA H1 classifications for incidental food contact
Applications
Dow Corning White EP Bearing Grease can be used to lubricate bearings, gears, chains and sliding mechanisms in process machinery, in canneries, dairies, beverage plants, meat processing plants and pharmaceutical plants. It is an excellent choice for operations where products must be manufactured, packaged or transported without black material contamination. Dow Corning White EP Bearing Grease is appropriate for low-to-high loads, moderate-to-high temperatures and moderate-to-high speed applications.
How To Use
Dow Corning White EP Bearing Grease can be applied by hand packing, handoperated grease guns, automatic greasing equipment and central lubricating systems. When lubricating antifriction bearings, follow the bearing manufacturers instructions. When lubricating plain bearings, the new grease should be pumped in until all of the old grease has been expelled.
Typical Properties
These values are not intended for use in preparing specifications. Color ................................................................. White Base Oil ..................................................... Mineral oil Base Oil Viscosity/SUS at 100F (38C) ................................................ 490 Solid Lubricant Content, percent ................................................................. 5 Thickener .................................. Aluminum complex ASTM D 217 Penetration, worked 60 ...................................... 280 Consistency, NLGI.................................................. #2 Operating Temperature Range1, F (C) ..................... 0 to 300 (-17 to 149) Fed Std 791 Bleed at 212F (100C), percent .......................... 1.4 Fed Std 791 Evaporation at 212F (100C), percent ............... 1.4 ASTM D 2266 4 Ball Wear Scar, 1200 rpm, 1 hour at 167F (75C), mm ........................... 0.64 ASTM D 2596 4 Ball Weld Load, N ........................................... 1300 Estimated Maximum Dn Value .................... 200,000 ASTM D 2265 Dropping Point, F (C) ............................ 518 (270)
1 Estimated service temperature range based on product formulation and laboratory testing. Actual service temperature range is dependent on other factors including the specific application environment.
Use Limitations
Dow Corning White EP Bearing Grease may not be appropriate for lubrication under exceptionally severe operating conditions, or where chemical influences or temperature extremes are likely. This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Storage/Useable Life
When stored at or below 90F (32C), Dow Corning White EP Bearing Grease has a useable life of 60 months from date of manufacture by Dow Corning.
Specification Writers: Please obtain a copy of the Dow Corning Sales Specification for this product and use it as a basis for your specifications. It may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (517) 496-6000.
Available Packaging
Dow Corning White EP Bearing Grease is available in 0.525-oz (15-g) pillow packs, 14.1-oz (400-g) cartridges, 35-lb (15.9-kg) pails, and 120- and 400-lb (54.4- and 181.4-kg) drums.
SAFE HANDLING INFORMATION PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE FROM YOUR DOW CORNING REPRESENTATIVE, OR DISTRIBUTOR, OR BY WRITING TO DOW CORNING CUSTOMER SERVICE, OR BY CALLING (517) 496-6000. LIMITED WARRANTY PLEASE READ CAREFULLY Dow Corning believes that the information in this publication is an accurate description of the typical characteristics and/or uses of the product or products, but it is your responsibility to thoroughly test the product in your specific application to determine its performance, efficacy and safety. Suggestions of uses should not be taken as inducements to infringe any particular patent. Unless Dow Corning provides you with a specific written warranty of fitness for a particular use, Dow Cornings sole warranty is that the product or products will meet Dow Cornings then current sales specifications. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR USE. Your exclusive remedy and Dow Cornings sole liability for breach of warranty is limited to refund of the purchase price or replacement of any product shown to be other than as warranted, and Dow Corning expressly disclaims any liability for incidental or consequential damages.
Dow Corning is a registered trademark of Dow Corning Corporation. 1994, 1998 Dow Corning Corporation. All rights reserved. Printed in USA
AGP3858
Product Information
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Parameter Appearance Base oil viscosity at 40C JIS K 2220 Penetration (worked 60 times) NLGI class Service temperature range Density JIS K 2220 Drop point JIS K 2220 Bleed (100C 24 hours) JIS K 2220 Evaporation (99C 22 hours) JIS K 2220 Oxidation resistance (99C 100 hours) JIS K 2220 Copper corrosion (100C 24 hours) ASTM D 2596 Four ball weld load (1500rpm/1minute) ASTM D 2266 Four ball wear scar (1200rpm, 392N, 1 hour) JIS K 2220 Low temperature torque test (-40C) Starting torque Running torque *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials. Standard* Unit mm/s Result Yellow 29 300 1 to 2 -45 to 150 0.90 195 3.0 0.2 0.02 1a 5200 0.40 93 49
COMPOSITION
x Poly--olefin x Lithium soap x Special solid lubricants
HOW TO USE
Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONS
This product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling. At high temperatures in excess of 200C, the breakdown of fluorinated polymer can cause the release of a small amount of toxic gas. Ensure adequate ventilation.
PACKAGING
This product is available in 1kg cans (10 cans/case) and 16kg pails.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning is a registered trademark of Dow Corning Corporation. 2006 Dow Corning Corporation. All rights reserved.