Академический Документы
Профессиональный Документы
Культура Документы
akmyamuna How to improve Hand Over Success Rate by 166 Follow ers
It is very important to maintain correct neighbour plan and do the basics. If you do not follow the basics of neighbour planning, it is very limited to possibilities to improve HOSR by using parameters. Edge, Layer, PBGT, Quality or Load sharing handovers will not work properly if we do not have correct neighbour plan. Therefore we must work on HO basics as the first step to improve HOSR. 1). Define correct neighbours
Still it is found many neighbour relations are missing even co-located neighbours. Initially we can find missing neighbours by using Nastar. After that we should work on tools available in BSCs which give you real HO requirements in the field (Undefined Adjacent Cell Measurements in BSC32 and Neighbour Cell Optimization tool in BSC6000, unfortunately still we are not able to use these tools available with the BSC6000 & M2000). 2). Method of removing neighbours Based on HO statistics, this is the best and only method that I suggest to remove neighbours. We can remove HO relations which have fewer no of HOs and cells having poor HOSR, but it depends on the importance of the neighbour to avoid call drops). Further Nastar is not a good tool to remove neighbours. 3). Same BCCH & BSIC combinations Avoid same BCCH+BSIC combination is very important to improve HOSR. In this case it is better to keep maximum possible distance between same BCCH+BSIC combinations. I recommend keeping 6km distance in urban area. Again this checking should be done periodically since many new sites become on-air time to time. 4). External neighbour parameters This is very important since there are many BSC borders in the City area.
akmyamuna.hubpages.com/hub/How-to-improve-Hand-Over-Success-Rate
4G: LTE/LTE-Advanced for Mobile Broadband Amazon Price: $76.23 List Price: $125.00 An Introduction to LTE: LTE, LTE-Advanced, SAE and 4G Mobile Communications Amazon Price: $61.21 List Price: $80.00 LTE - The UMTS Long Term Evolution: From Theory to Practice Amazon Price: $87.02 List Price: $120.00
1/3
4/11/13
Many hand over improvement can be achieved in the city area by improving inter BSC HOSR. This external neighbour parameter checking has to be done periodically. 4). Frequency plan Co-channel interference degrades HOSR. Proper neighbour relations will increase HOSR while improving all other KPIs such as CDR, Congestion and CSSR. I expect your support to improve HOSR by following above steps.
LTE Signaling: Troubleshooting and Optimization Amazon Price: $84.61 List Price: $120.00 LTE and the Evolution to 4G Wireless: Design and Measurement Challenges Amazon Price: $84.72 List Price: $115.00 Fundamentals of LTE (Prentice Hall Communications Engineering and Emerging Technologies Series) Amazon Price: $49.47 List Price: $79.99
Location Update
Why location updates? Network has to identify where is the mobile is located to page it when an incoming call is received. Why cannot page the entire network? Millions of calls receive every
akmyamuna.hubpages.com/hub/How-to-improve-Hand-Over-Success-Rate
4/11/13
moment, the...
akmyamuna.hubpages.com/hub/How-to-improve-Hand-Over-Success-Rate
3/3