Вы находитесь на странице: 1из 4

Position

Qty.

Description

Single Price

Unilift AP12.40.08.A3

Price on request

Note! Product picture may differ from actual product

Product No.: 96023873 Submersible drainage pump type Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 3-phase totally enclosed motor in insulation class F. The pump is fitted with a suction strainer. The pump is supplied with a control box including motor starter and motor protection and with an 0.8 m mains cable. Furthermore, the pump is supplied with level switch for automatic start and stop and 10 m level switch cable. The impeller is a SEMI OPENimpeller for 12 mmfree passage suitable for pumping groundwater, surface water, rain water and similar. The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil. The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings. The pump is ready for use as it is fitted with carrying handle and is supplied with a 10 mmains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings. Liquid: Liquid temperature range: Liquid temp: Density: Technical: Resulting head of the pump: Type of impeller: Maximum particle size: Materials: Pump housing:

0 .. 55 C 20 C 998.2 kg/m

12.1 m SEMI OPEN 12 mm

Impeller:
Printed from Grundfos CAPS

Stainless steel DIN W.-Nr. 1.4301 AISI 304 Stainless steel

1/4

Position

Qty.

Description

Single Price

DIN W.-Nr. 1.4301 AISI 304 Installation: Pump outlet: Maximum installation depth: Electrical data: Power input - P1: Mains frequency: Rated voltage: Rated current: Cos phi - power factor: Rated speed: Enclosure class (IEC 34-5): Insulation class (IEC 85): Length of cable: Type of cable plug:

Rp 1 1/2 10 m

1.2 kW 50 Hz 3 x 400 V 2A 0,87 2810 rpm 68 F 10 m CEE

Others: Net weight: Gross weight:

13.8 kg 14.5 kg

Printed from Grundfos CAPS

2/4

96023873 Unilift AP12.40.08.A3 50 Hz


H (m) Unilift AP12.40.08.A3, 50 Hz eta (%) Q = 1.88 l/s H = 12.1 m v = 1.5 m/s Liquid temperature = 20 C 70 Density = 998.2 kg/m

14

12

60

10

50

40

30

20

10

0 0 P1 (kW) 1.2

0.5

1.5

2.5

3.5

4.5

Eta pump+motor = 27.5 % 0 5 5.5 6 Q(l/s)

0.8

0.6

0.4

0.2 0
Printed from Grundfos CAPS

P1 = 810 W 3/4

96023873 Unilift AP12.40.08.A3 50 Hz

216 Rp 1 1/2

Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. Printed from Grundfos CAPS

346

4/4

Вам также может понравиться