Академический Документы
Профессиональный Документы
Культура Документы
Rev. 110214-1
OTHER CHALLANGES
-2 -
Type of Materials/ Processes - Thin / thick films / general thickness / walls / sandwich-u. Multi Layer - Diffusion and surface layers, insulation
Background measurements, solution requirements within the meaning of - Influence of coating on the material properties: Optical / electrical / acoustic mechanical / chemical / thermal / porosity
APPLICATION TSLSYSTEMSERIES MATERIAL THICKNESS MT/QS/US/QW/EL/DF/AU/FI/US/FH1/FH 7 FILM THICKNESS PCI / delta / GA / RA / QS / DF COEX / DUPLEX THICKNESS MT / FI / EL / AU + DF THIN PCI / delta / GA / RA GLUE / LAMINATE PCI / delta SURFACE .- roughness / TOPOGRAPHY / PORE PCI / SU / PCT / TH / TY / FI / PO Color, luster, cleanliness / PURITY delta / PG / CC / PCI
SPECIAL APPLICATIONS RADII, INTERNAL PIPE, SMALL AREAS MT / EL / DF / AU / FI / PCI / FH Layers on wood + new materials QA / PCI / delta LayerMaterials PAINT / PAINT + CERAMIC other organic THICK QA / MT / DF / EL / AU / FI / RA / delta / PCI / CCS Order process Spraying, powder MT / QA / QW / EL / DF / AU / FI / PCI / delta
www.tslmandelkow.com
mailto: info@tslmandelkow.com
-3 OrdereProcess,specifically Plating STAINLESS STEEL, MT / DF / QS / FH / MT / DF / EL / AU / POWDER SOLGEL, THERM.SPRITZEN, PVD, CVD QA / RA / EL / alpha / delta / PCI / CCS BASE-COAT + el.TAUCH PROCESS alpha / delta ONLINE MEASUREMENT It should be noted that most solutions as online versions, and more extensively for the 8-hour operation to date as budget systems are available.
To get nearer to your challenge, we ask for reasons of effectiveness initially, personal requests.
www.tslmandelkow.com
mailto: info@tslmandelkow.com
-4 -
NAVIGATION NOTE Dear reader of our Representations, in order to effectively and accurately find your desired Task Stellungn by TSL Solving strategies and systems please use the following 5 Choice of topic buttons, if you are :
>starting from Your material to be measured at Material >or Your Application starting >or the already knownn Procedure >or if you apply for a Commercial unit Interest >content / editorial Backgrounds- And on our problem-solving opportunities, Engineering and want to inform R & D.
-> MATERIAL -> APPLICATION -> SYSTEMS -> SHOP -> SUPPORT
We give up the search word input, the experience shows very often user Expectations not responded. They are therefore our opportunities for your measuring task by image-navigation after the 3-th level. By Press Your right Choice of topics-Key to move from the 1st -,in the 2nd level where you to your Target . Approach From the 2. Level navigate by Image keyingUntil you are in der 4. Level
TV Conference> -1197
www.tslmandelkow.com
mailto: info@tslmandelkow.com
-5 -
Product: Makrolon, polycarbonate Application: <2 mm wall, - and 2-20m coating TSL System: delta 3.2 + PCI (scanning), Wall: delta 3.4 and FH
Product: BMW door shilding, rubber Application: <20m coating measurement TSL System: PCI
0049 - (0) 9841 - 40-1189 Fax - 1196 TV-Conference - 1197 www.tslmandelkow.com mailto: info@tslmandelkow.com
-6 -
Product: automotive interior, carbon Application: <100 micron coating measurement TSL System: PCI
www.tslmandelkow.com
mailto: info@tslmandelkow.com
-7 -
Product: Space, glass-fiber Application: 8-20 mm wall thickness TSL System: FH featuring convert
Product:
Glass-fiber Container
-8 -
Product:
Wood,- Furnishing
Application: 20-200 micron multi-layer coating thicknesses TSL System: PCI non contact / contact U.S.
Product:
-9 -
Product:
www.tslmandelkow.com
mailto: info@tslmandelkow.com
-10 -
Product:
Injector, polacarbonate
Application: 0.1-2 micron coating thicknesses and online through wall TSL System: delta 3.9
Product:
Blister packaging
-11 -
Product:
offset printing
Product:
GlassContainers
Application: 2-5 mm wall thickness TSL System: PCI / delta online and offline FH
0049 - (0) 9841 - 40-1189 Fax - 1196 TV-Conference - 1197 www.tslmandelkow.com mailto: info@tslmandelkow.com
-12 -
www.tslmandelkow.com
mailto: info@tslmandelkow.com
www.tslmandelkow.com
mailto: info@tslmandelkow.com
-14 -
NAVIGATION within the TSL kathegorisierten materials / methods described in the direction of measurement system distribution in each case above TSL-operated working area. Other operations are u.U. very different. Some commercial areas require individual user information, so we ask you for your request-> aA
Ratings are the first orientation, of course, subject to individual review and if profitability analysis. Points 7, 9, 10 and 11, we respond to the knowledge of concrete Questions individually -> a.A.
www.tslmandelkow.com
mailto: info@tslmandelkow.com
-15 -
GLOSSARY SDM-> coating being measured WDM-> Walls/material being measured TSL-system-name in thickness Measuremnet technologies inductive Wiedycurrent ULTRAsonics Hall-sensor Optic Interferometer electricstat Coulommetric Tactile R xray Thermic 03 Area Measurementarea in m -> useful / border 04 prakt. Tolerance Tol in the above industries, operating range: under 100 micron in microns, / / About 100 micron-> in% of reading 05 USP- Efficiency and solution height such as: power Measure possible / Physics fits better than conventionally used procedures / simple / safer to use / less need for training .... other benefits 0 -> there is no 10 -> relevance in competition 06 measurement electronic data pratised 1 -> low 10 -> high 07 known Risk per Operator error 1 -> low 10 -> high 08 Knowledge needed: Responsible / Operator 1 -> Instruction 5 -> Training 10 -> education 09 known payback in months with device cuts, frequency / solvent storage 10 TestPart-Costs, under section 10 in the particular environment including staff / training / Test Preparation in EUR 1 -> low 10 -> high 11 possible Potential of Prevention, Returns /ComplianceCosts 0P USE 01 TYPE 02 Physics Abbreviations used as following
www.tslmandelkow.com
mailto: info@tslmandelkow.com
-16 -
TSL-SYSTEMS
Largely current EU standard. Built in or external probes. External probes often in the system 2 to about 20 000m Data transfer and / or internal statistics, Internal memory for data series (batches) and / or memory for spec. Adjustment settings (applications). Equipment portable / stationary, by radio, infrared, or via interface multiplexing / Mux. Accessory sets, tripod / handling, roll-additives, Mux, data, radio ... BUTTON > Systems> Hand Measuring-> Options BUTTON > Systems> hand-held> Options + programs Measuring and transfer programs for every need,
TSL-TYPE USE
FAILURE RISK
PREV
OP 01 02 03
MT Series
04 05 06 07 08 09
10
11
TSL-TYPE USE
FAILURE RISK
KNOWLEDGE Amort.
COSTS
PREV
OP 01 02 03
MT 700 Series
04 05 06 07
08
09
10
11
TSL-TYPE USE
FAILURE RISK
KNOWLEDGE Amort.
COSTS
PREV
OP
01 02
03
Sensors
04
05 06 07
08
09
10
11
www.tslmandelkow.com
mailto: info@tslmandelkow.com
-17 SDM / WDM MT IND / WI 2-800 000 1 / / 1-5 4 - aA 10 / 6 a.a a.a a.A.
TSL-TYPE USE PRINCIPLE OF MEASUREMENT TOLERANCE RANGE ALPHA DATA FAILURE RISK KNOWLEDGE Amort. COSTS PREV
OP 01 02 03
FH 1 Series
04 05 06 07
08
09
10
11
SDM / WDM FH1 BONDING force 5-20 000 3 / / 3-10 5 / 10 - aA 6 / 1 a.a a.a a.A.
A representative type-section of our extensive product range, - According to fitness, we offer you the system or even more suitable for your needs.
TSL-TYPE USE
COSTS
PREV
OP 01 02 03
FH 7 Series
04 05 06 07
08
09
10
11
TSL-TYPE USE
COSTS
PREV
OP 01 02 03
QW Series
04 05
06
07
08
09
10
11
TSL-TYPE USE
COSTS
PREV
OP 01 02 03
SU Series
04 05
06
07
08
09
10
11
-18 -
TSL-TYPE USE
COSTS
PREV
OP 01 02 03
PG Series
04 05
06
07
08
09
10
11
TSL-TYPE USE
COSTS
PREV
OP 01 02 03
PCT Series
04 05
06
07
08
09
10
11
TSL-TYPE USE
COSTS
PREV
OP 01 02 03
MI Series
04 05
06
07
08
09
10
11
TSL-TYPE USE
COSTS
PREV
OP 01 02 03
PT Series
04 05
06
07
08
09
10
11
www.tslmandelkow.com
mailto: info@tslmandelkow.com
-19 -
TSL-TYPE USE
COSTS
PREV
OP 01 02 03
MF Series
04 05
06
07
08
09
10
11
TSL-TYPE USE
COSTS
PREV
OP 01 02 03
STR Series
04 05
06
07
08
09
10
11
TSL-TYPE USE
COSTS
PREV
OP 01 02 03
CC Series
04 05
06
07
08
09
10
11
TSL-TYPE USE
COSTS
PREV
OP 01 02 03
OLxz Series
04
05
06
07
08
09
10
11
OP 01 02 03
Delt-C Series
04 05
06
07
08
09
10
11
-20 -
TSL-TYPE USE
COSTS
PREV
OP 01 02
OLxyz Series
04
05
06
07
08
09
10
11
www.tslmandelkow.com
mailto: info@tslmandelkow.com
-21 -
The following SELECTION of other implemented applications, also for new Solutions can be helpful.
-22 -
Avionics - Automation - Boats - Railways - Buildings Lighting - Concrete - display - floor coverings - oil rigs Cards - Cardan Castor nukl. - Surgery - Chrome - container Coextrusion - Wire - Design - Anodising - Electricity - Electronics Nutrition - cycling - color - walls - fire protection Filter - Movies - mold - gas supply Electroplating - Dangerous
Health - Foundry - Cross - glass - sliding Rubber - port crane - Semiconductors - Adhesive - holography med skins - Wood - High Voltage - Hydraulic - Implants Instruments Catalysts - Tank - Necklaces - Coal - Construction Adhesive Air - Components - Beauty - Kitchen - Copper - Patent - Storage Laminates - Leather - Aviation Luxuries - tape - Machines Marine - Poles - medical tubing - Models - Motors - Military Walls - microphones - Multi Layer - garbage trucks - Musical Instruments Wet Test - nickel - non-ferrous - Nuclear - Offset - Optics Paper - Paleontology Pharma - Pipeline - Polycarbonate China - powder coatings - rocket - space - Tyres Corrugating Rolls-ray Roles - Sandwich - Headlight - Tubes - Locks Snow - Screens - Screen Printing - safety glass - signaling
0049 - (0) 9841 - 40-1189 Fax - 1196 TV-Conference - 1197 www.tslmandelkow.com mailto: info@tslmandelkow.com
-23 -
Switch - Toys - Storage - sheet piling Dams - Teflon - Wings Transformers - Fuel-caking agent - animal skins - Turbines Carpets Textile tec .- U-boat watches valves Connector Package - Rolls-water supply - water slides Tools - living - heat exchanger - Elect. Toothbrushes Cement - zinc - cylinder
www.tslmandelkow.com
mailto: info@tslmandelkow.com
-24 -
NOTE
In the SD measurement GEpreliminary Terms that in communication can confuse: Calibration a measuring instrument: Repatriation on a national / international deposited Standard mass and timed De Documentations Target-state durch a Calibration with certificate and seal. Adjustment/ Setting the meter: Electrical preparation and adjustment of the instrument for the current Messaufgabe.durch the user by means of zero and any film standard.
The Adjustment is often Manuals in more than >Calibration, 'Or' calibration < and on keyboards with> KAL <button called!
, or micron-> microns?
At this point the opportunity to emphasize that according to DIN EN ISO throughout the issue is not the Greek term (micron), but binding of the metrological term microns,Micrometer, Is utilized. m 1 m 1 x 10-6 M 1: 1000 000 meters 0, 000 001Meter 0,001 mm 1mm 1 x 10-3 M 1 Meter: 1000 1mm -> 1000 m
www.tslmandelkow.com
mailto: info@tslmandelkow.com
-25 -
DIN 50976
Hot dip galvanizing of components (hot dip galvanizing); requirements and testing,
DIN EN ISO 2064 / DIN 50 928 for replacement-1 Metallic and other organic layers, definitions and Provisions relating to the measurement of film thickness: 1987-08) DIN EN ISO 2178 / Replacement for DIN 50 981: 1979-05) Non-magnetic coatings on magnetic substrates; Measurement of coating thickness, Magnetverfah, Ren DIN EN ISO 2360 / Replacement for DIN 50 984: 1978-08 Non-conductive coatings on non-magnetic substrates; Measurement of coating thickness, eddy currentprocess
-26 Quality System-Directive FORD Q-101 or the manuals of the German Society for Quality (DGQ) as a further indication for the calculation of control limits.
DIN 1319-3
includes: DIN 50 981, DIN 50 984, ISO 2178, 2360, 2808, BS 5411 (3,11) 3900 (c, 5) and ASTM B499, DI 400th
www.tslmandelkow.com
mailto: info@tslmandelkow.com
-27 -
NAVIGATION NOTE Dear reader of our Representations, in order to effectively and accurately find your desired Task Stellungn by TSL Solving strategies and systems please use the following 5 Choice of topic buttons, if you are :
>starting from Your material to be measured at Material >or Your Application starting >or the already knownn Procedure >or if you apply for a Commercial unit Interest >content / editorial Backgrounds- And on our problem-solving opportunities, Engineering and want to inform R & D.
-> MATERIAL -> APPLICATION -> SYSTEMS -> SHOP -> SUPPORT
We give up the search word input, the experience shows very often user Expectations not responded. They are therefore our opportunities for your measuring task by image-navigation after the 3-th level. By Press Your right Choice of topics-Key to move from the 1st -,in the 2nd level where you to your Target . Approach From the 2. Level navigate by Image keyingUntil you are in der 4. Level
TV Conference> -1197
www.tslmandelkow.com
mailto: info@tslmandelkow.com