Вы находитесь на странице: 1из 12

Luminex LDS 1.7 SP2 Upgrade Instructions to xPONENT 3.

1 SP1
For In Vitro Diagnostic Use

LUMINEX CORPORATION, 2001-2009. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, or translated into any language or computer language, in any form or by any means without prior express, written consent of:

LUMINEX CORPORATION 12212 Technology Boulevard Austin, Texas 78727-6115 U.S.A. Voice: (512) 219-8020 Fax: (512) 219-5195

Luminex LDS 1.7 SP2 Upgrade Instructions to xPONENT 3.1 SP1

PN 89-00002-00-212 Rev. B May 2011

EC

REP

WMDE Bergerweg 18 6085 AT Horn The Netherlands

Luminex Corporation (Luminex) reserves the right to modify its products and services at any time. This guide is subject to change without notice. Although prepared to ensure accuracy, Luminex assumes no liability for errors or omissions, or for any damages resulting from the application or use of this information. The following are trademarks of Luminex: Luminex, Luminex 200, xPONENT, xMAP, Luminex XYP, and Luminex SD. All other trademarks, including Windows, Cheminert, Core, and Dell are trademarks of their respective companies. The contents of this manual and the associated Luminex software are the property of Luminex and are copyrighted. Except as specified in the End User License Agreement, any reproduction in whole or in part is strictly prohibited.

Contents
Upgrade Procedure .............................................................................1 Important Upgrade Information..........................................................2 Recommendations...............................................................................2 Training...............................................................................................3 System Requirements .........................................................................3 Kit Components ..................................................................................3 Upgrade Instructions...........................................................................4 Install New PC .............................................................................4 Archive My Sessions Folder.....................................................5 Uninstall Luminex LMAT Software ............................................5 Uninstall Luminex Software .......................................................6 Install Luminex xPONENT 3.1 SP1 Software.............................6 Verify Firmware Version .............................................................8 Obtain License Key ............................................................................8 Luminex Contact Information ............................................................8

ii

Upgrade Procedure

Luminex LDS 1.7 SP2 Upgrade Instructions to xPONENT 3.1 SP1 - For In Vitro Diagnostic Use

Important Upgrade Information

Before performing the Luminex xPONENT 3.1 SP1 upgrade, verify that the following cables are in place on your system: USB cable from P1 on the Luminex 100 or Luminex 200 analyzer to a USB port on the PC. CANBUS cable from P1 on the Luminex SD to P2 on the analyzer. Serial cable from the Luminex XY Platform to the PC.

Caution: If you do not have these cables connected, you may need a firmware update; contact Technical Support. Continuing the upgrade without the proper firmware and cables may cause data corruption. Important: This product conversion kit is intended for use on a single Luminex analyzer purchased after October 1, 2000. If you install this kit on multiple analyzers, you accept the legal and financial risk associated with violating software licensing. Warning: Installing this kit on an analyzer that includes an XYP instrument purchased before May 30, 2001 can cause hardware damage not covered under the warranty or within Luminex service agreements. If the XYP instrument you are using was purchased before May 30, 2001, contact Luminex Technical Support for further instructions. Luminex xPONENT 3.1 SP1 has been validated to run on Microsoft Windows XP Professional SP3. If you would like to upgrade your system to XP Professional SP3, contact your companys IT department. If you are using a PC that did not come with the upgrade, your PC must meet the minimum specifications outlined in "System Requirements" below. If you are using a PC that meets the requirements but was not purchased from Luminex, contact Luminex Technical Support.

Recommendations

This document provides an overview of the conversion process from Luminex LDS1.7 SP2 to Luminex xPONENT 3.1 SP1. Refer to Luminex xPONENT 3.1 Software Manual for a product review of the software. Luminex xPONENT 3.1 SP1 is designed as a closed system. Before you install the software, contact your internal Information Technology (IT) department or refer to Microsoft Help for networking questions. Luminex does not support individual network configurations. Warning: If your analyzer has been exposed to a biohazard, sanitize the analyzer. Take all other normal standard laboratory precautions.

Luminex LDS 1.7 SP2 Upgrade Instructions to xPONENT 3.1 SP1 - For In Vitro Diagnostic Use

Training

To register or find out more about Luminex xPONENT 3.1 SP1 training, contact Luminexs Services Sales Team at serviceandtraining@luminexcorp.com or 512-219-8020, ext. 4386. Visit www.xmapuniversity.com for more details. This upgrade kit requires that you have the following: A Luminex 100/200 analyzer bearing an Underwriters Laboratories Inc. (UL) mark on the back, loaded with Luminex LDS Version 1.7 SP2 software and shipped after October 1, 2000. Contact Luminex Technical Support with the analyzer serial number to confirm that it meets the requirements. A Luminex XYP purchased after May 30, 2001. Older versions do not contain updated hardware that enables the Luminex analyzer to maintain and detect sampling position errors. Do not use an older version with this upgrade. If you have questions, contact Luminex Technical Support. Note the serial number of your system and XY platform. This will assist our technical support department in determining whether your system is in the appropriate configuration to be upgraded. If you purchased a Luminex XYP prior to May 30, 2001 return it to Luminex in exchange for a replacement. Contact Luminex Technical Support for the shipping address and a Return Material Authorization (RMA) number. If the Luminex XYP is not returned within 30 days from the day you ordered the upgrade kit, you will be billed full price for the Luminex XYP. PC and monitor meeting the following minimum specifications: OS: Windows XP Professional SP3 Processor: 1.86 GHz Intel Core 2 or greater (2.66 GHz recommended) Memory: 2 GB RAM (4GB recommended) Hard Drive: 80 GB Screen resolution and number of colors: 1280 x 1024, 32 bits

System Requirements

Kit Components

Note: For information about calibration and verification frequency and procedures, see Luminex xPONENT 3.1 Software Manual.

These items come with all upgrade kits: Installation CD for xPONENT 3.1 SP1, including Release Notes. This also includes a series of links to Luminex services: General contact information, manuals (PDF format), training (xMAP University), support, and field service. If your PC is not connected to the internet, only the installation and Release Notes links are active. Automated Maintenance Plate (AMP) LX100/200 Calibration Kit LX100/200 Performance Verification Kit Luminex LDS 1.7 SP2 Upgrade Instructions to xPONENT 3.1 Luminex xPONENT 3.1 Software Manual on CD

Luminex LDS 1.7 SP2 Upgrade Instructions to xPONENT 3.1 SP1 - For In Vitro Diagnostic Use

These hardware items are part of the upgrade kit only if you purchase them from Luminex: PC A touchscreen monitor or a flatscreen monitor XYP These license packages are part of the upgrade kit only if you purchase them from Luminex: 21 CFR Part 11 package LIS package Automation package Security package Extra seats package

Upgrade Instructions

You must run Luminex xPONENT 3.1 SP1 on a PC that meets the minimum specifications listed in "System Requirements" on page 3. To upgrade your PC, contact Luminex Technical Support. See "Luminex Contact Information" on page 8. If you are installing a new PC, continue with "Install New PC" below. To upgrade an existing PC that meets the minimum specifications, continue with "Archive My Sessions Folder" on page 5. To install the new PC: 1. Close all applications. Perform a complete system shutdown. Turn the power off and unplug the Luminex analyzer, Luminex XYP, and PC. 2. Remove all connections from the old PC. Remove the old PC and set it aside. Set the new PC in place. 3. Connect the keyboard and mouse to an available USB port, and bar code reader to an available USB or PS2 port. 4. Connect the Luminex XYP serial cable to the back of the XYP and the computer serial port. 5. Connect the serial end of the Luminex 100/200 serial-to-USB cable to P1 of the Luminex 100/200 and the USB end to an available USB port on the computer. 6. Connect the monitor cable to the computer. Touchscreen monitors will have two cables.

Install New PC
Note: If you did not get a new PC with your xPONENT 3.1 SP1 upgrade, skip this step.

Luminex LDS 1.7 SP2 Upgrade Instructions to xPONENT 3.1 SP1 - For In Vitro Diagnostic Use

7. Connect power cables for the monitor, computer, Luminex analyzer, and Luminex XYP. 8. If you are installing a touchscreen monitor, you will need to install the touchscreen drivers and calibrate the touchscreen according to manufacturers instructions, or contact Luminex Technical Support for assistance.

Archive My Sessions Folder


Note: If you are installing a new PC, you do not need to archive the My Sessions folder.

You cannot import data into xPONENT 3.1 SP1 from Luminex LDS 1.7 SP2; however, you can store the data to import to another LDS 1.7 SP2 system at a later time. To save session data, archive your C:\My Sessions folder by copying the files to another folder or save them to a diskette or CD. xPONENT 3.1 SP1 stores session data in CSV and LXD files. If Luminex LMAT software is installed on your PC, remove it before installing xPONENT 3.1 SP1. During the LMAT software removal, error dialog boxes may open. They do not affect the uninstall. Click OK or Yes to continue the uninstall process. To remove the LMAT Software: 1. Close any open applications. 2. On the PC desktop select Start > Settings > Control Panel. The Control Panel opens on the desktop. 3. Double-click the Add/Remove Programs icon. The Add/ Remove Programs dialog box opens. 4. In the Currently installed programs list, select LMAT, then click Change/Remove. (If LMAT is not installed, continue to "Uninstall Luminex Software".) 5. The InstallShield WizardWelcome dialog box opens. Select Remove and click Next. The Confirmation File Deletion dialog box opens. Click OK. 6. If the Shared File Detected dialog box opens, select Dont display this message again, then click Yes. 7. If the Registry Editor dialog box opens, click OK. 8. When the InstallShield WizardMaintenance Complete dialog box opens, click Finish. Do not close the Add/Remove Programs dialog box.

Uninstall Luminex LMAT Software


Note: If you are installing a new PC, you do not need to uninstall Luminex software.

Luminex LDS 1.7 SP2 Upgrade Instructions to xPONENT 3.1 SP1 - For In Vitro Diagnostic Use

Uninstall Luminex Software


Note: If you are installing a new PC, you do not need to uninstall Luminex software.

During the Luminex software removal, error dialog boxes may open. They do not affect the uninstall. Click OK or Yes to continue the uninstall process. If you are continuing from the Remove Luminex LMAT Software procedure, skip to step 4. To remove the software:

1. Close any open applications.


2. On the PC desktop select: Start > Settings > Control Panel. The Control Panel dialog box opens on the desktop. 3. Double-click the Add/Remove Programs icon. The Add/ Remove Programs dialog box opens. 4. Under the Currently installed programs list, select Luminex LDS 1.7 SP2. The entry expands to include the Change/Remove button. Click Remove. The InstallShield Wizard dialog box opens and begins

removing the software. When the software is removed, the InstallShield Wizard dialog box closes automatically.
5. Repeat step 4 two more times, selecting LxMAINT and LXR in the Currently installed programs list. 6. Close the Add/Remove Programs dialog box and the control panel. 7. If the Luminex Data Collector icon is still present on the desktop, drag it to the Recycle Bin.

Install Luminex xPONENT 3.1 SP1 Software


Note: If you purchased a new PC from Luminex as part of the upgrade, you do not need to perform these steps. xPONENT 3.1 SP1 software is already installed.

Luminex xPONENT 3.1 SP1 includes the data conversion utility, xCONVERT, which requires a separate installation. To install the software: 1. Click Install xPONENT to begin installation of xPONENT 3.1 SP1. 2. An Internet Explorer dialog box opens with the following text: Active content can harm your computer or disclose personal information. Are you sure that you want to allow CDs to run active content on your computer? Click Yes to continue. 3. A File Download Security Warning dialog box opens with the following text: Do you want to run or save this file? Click Run to continue. 4. An Internet Explorer Security Warning dialog box opens with the following text: The publisher could not be verified. Are you sure you want to run this software? Click Run to continue.

Note: Steps 2, 3, and 4 may not occur in all installations.

Luminex LDS 1.7 SP2 Upgrade Instructions to xPONENT 3.1 SP1 - For In Vitro Diagnostic Use

Note: At this point in the installation (step 5), the PC may reboot. If the InstallShield wizard fails to appear after rebooting, ensure the user is logged in as admin or as a user with installation privileges, and manually run (setup.html) again from the DVD. To run the setup file manually, open the PC directory structure and located the DVD drive. Open the directory on that drive. Locate and click set.up.html.You will see dialog boxes similar to steps 2-4; follow the same instructions to continue the installation. Note: Please see Licensing in the Using chapter of the xPONENT 3.1 software manual if you need information on how to change licensing information.

5. An InstallShield Wizard dialog box opens. Click Install to continue. The installation continues, displaying progress bars. This may take several minutes. 6. The computer opens a Luminex xPONENT 3.1 SP1 InstallShield wizard. Click Next to continue. 7. At the next dialog box, select I accept the terms in the license agreement and click Next. 8. A Database Server dialog box opens. Click Next to continue. 9. A dialog box opens with two installation options, Complete and Custom. Select Complete and click Next to continue. 10. Click Install at the next dialog box to continue installation, which may take several minutes. 11. Click Finish at the final InstallShield Wizard to complete the installation. 12. Double-click the Luminex xPONENT icon on your desktop. 13. A license agreement dialog box opens. Click I accept the terms in this license agreement, and click OK to continue. 14. A new license dialog box opens displaying the licenses for the installation. Click OK to complete the installation and open the xPONENT 3.1 SP1 login screen. To install the xCONVERT Data Conversion Utility: 1. Click Install xPONENT file conversion utility. A File Download Security Warning dialog box opens. 2. Click Run. An Internet Explorer Security Warning dialog box opens. 3. Click Run. An xCONVERT Setup dialog box opens (.NET Framework 2.0).

Note: Steps 3 and 4 may not occur in all installations.

4. Click Accept. An xCONVERT Setup dialog box opens (for SQL Server 2005 Express Edition). 5. Click Accept. An xCONVERT Setup dialog box opens (Visual C++ Runtime Libraries (x86). 6. Click Install. A series of installation dialog boxes open as the software installs. This may take several minutes. 7. The xCONVERT Setup Wizard opens. Click Next to continue. 8. Select an installation folder for the software. Click Next to continue. 9. The Confirm Installation dialog box opens. Click Next to continue. 10. An Installation Complete dialog box opens. Click Close to complete the installation.

Luminex LDS 1.7 SP2 Upgrade Instructions to xPONENT 3.1 SP1 - For In Vitro Diagnostic Use

Verify Firmware Version

Verify that the correct firmware version for the Luminex analyzer and the Luminex XYP display in the xPONENT software. Click Maintenance>System Info. The Detector Firmware Version (Luminex 100 or Luminex 200) and the XY Firmware Version fields should display the latest firmware version numbers. If you have a Luminex 100, the firmware version should be 2.3.9. If you have a Luminex 200, the firmware version should be 2.6.1. The XYP firmware version should be 2.1.15. If any of these firmware versions are incorrect, contact Luminex Technical Support for instructions on updating your firmware.

Obtain License Key

You must obtain a license key from Luminex Technical Support to enable the full base package beyond the 90-day trial period. In order to assign your license key, we will need information about your Luminex system. Please have the following information available: The serial number of your Luminex system. The serial number of your Luminex XYP. Additionally, we will need information provided in the xPONENT licensing export file. To create this file: 1. Open the Luminex xPONENT software. 2. Click Admin on the toolbar. 3. Click the Licensing tab. 4. Click Export. This creates a text attachment that can be saved wherever is convenient for you to retrieve it. 5. Email that attachment to support@luminexcorp.com. 6. When you receive the return email from Luminex Technical Support, follow the instructions in the email to import the new license key.

Luminex Contact Information

Contact Luminex Technical Support by telephone in the U.S. and Canada at 1-877-785-BEAD (2323), by telephone outside the US and Canada at +1 512-381-4397, or by email at support@luminexcorp.com. Additional information is available on the Luminex website. Search on the desired topic, navigate through menus, or review the website FAQ section. Enter http://www.luminexcorp.com in your browsers address field. Click Support > Support Login to log into the Support FAQ site, then click on the Support tab.

Вам также может понравиться