Академический Документы
Профессиональный Документы
Культура Документы
Device Info
Board ID: Build Timestamp: Software Version: Bootloader (CFE) Version: DSL PHY and Driver Version: Wireless Driver Version:
509 1023
LAN IPv4 Address: Default Gateway: Primary DNS Server: Secondary DNS Server:
Board ID: Build Timestamp: Software Version: Bootloader (CFE) Version: DSL PHY and Driver Version: Wireless Driver Version:
509
Line Rate - Downstream (Kbps): LAN IPv4 Address: Default Gateway: Primary DNS Server: Secondary DNS Server:
WAN Info
Interface pppoe_0_8_81
Description ppp0
Type PPPoE
Igmp Enable
NAT Enable
Firewall Enable
Status Connected
vlanID Disable
Statistics -- LAN
Interface Bytes eth0 eth1 eth2 eth3 wl0 847960 0 8764 0 34282081
Received Pkts 4776 0 21 0 134173 Errs 0 0 0 0 0 Drops 0 0 0 0 0 Bytes 4326097 51976 5165 51976 68342039
Statistics -- WAN
Interface
Description Bytes
pppoe_0_8_81
ppp0
59544505
Statistics -- xDSL
ADSL_2plus ATM Up L0
Downstream Line Coding(Trellis): SNR Margin (0.1 dB): Attenuation (0.1 dB): Output Power (0.1 dBm): Attainable Rate (Kbps): On 375 60 59 24068
Flags: U - up, ! - reject, G - gateway, H - host, R - reinstate D - dynamic (redirect), M - modified (redirect). Destination 182.185.128.1 192.168.1.0 0.0.0.0 Gateway 0.0.0.0 0.0.0.0 0.0.0.0 Subnet Mask 255.255.255.255 255.255.255.0 0.0.0.0 Flag UH U U Metric 0 0 0 pppoe_0_8_81 Service pppoe_0_8_81 Interface ppp0 br0 ppp0
Mode Select
Choose Add, or Remove to configure DSL ATM interfaces. DSL Link Connection Category Latency Type Mode Path0 UBR EoA Scheduler Queue Group Remove Alg Weight Precedence
IP QoS
DefaultMode Disabled
Choose Add, or Remove to configure DSL ATM interfaces. DSL Link Connection Category Latency Type Mode Path0 UBR EoA Scheduler Queue Group Remove Alg Weight Precedence
IP QoS
DefaultMode Disabled
Choose Add, Remove or Edit to configure a WAN service over a selected interface. Interface ppp0 Description Type Vlan8021p VlanMuxId N/A N/A Igmp NAT Firewall Remove Edit Enabled
pppoe_0_8_81 PPPoE
Disabled Enabled
Configure the Broadband Router IP Address and Subnet Mask for LAN interface. IP Address: Subnet Mask:
192.168.1.1 255.255.255.0
Disable DHCP Server Enable DHCP Server Start IP Address: End IP Address: Leased Time (hour):
192.168.1.2 192.168.1.254 one day
DSL Settings
G.Dmt Enabled G.lite Enabled T1.413 Enabled ADSL2 Enabled AnnexL Enabled ADSL2+ Enabled AnnexM Enabled Select the phone line pair below.
UPnP Configuration
NOTE: UPnP is activated only when there is a live WAN service with NAT enabled.
Enable UPnP
IGMP Configuration
Enter IGMP protocol configuration fields if you want modify default values shown below. Default Version: Query Interval(s): Query Response Interval(s): Last Member Query Interval(s): Robustness Value: Maximum Multicast Groups: Maximum Multicast Data Sources for IGMPv3 : (1 - 24): Maximum Multicast Group Members:
10 25 3 125 10 10 2 25
MLD Configuration Enter MLD protocol (IPv6 Multicast) configuration fields if you want modify default values shown below.
Default Version: Query Interval(s): Query Response Interval(s): Last Member Query Interval(s): Robustness Value: Maximum Multicast Groups: Maximum Multicast Data Sources (for mldv3):(1 - 24): Maximum Multicast Group Members: Fast Leave Enable: LAN to LAN (Intra LAN) Multicast Enable:
Enable Wireless
b/g/n Mixd Mode
Do_not_Connect C8:3A:35:1E:13:6 8
Hide SSID
(Max:16)
Auto
20MHz
40MHz
WPS Setup
This feature is available only when WPA-PSK, WPA2 PSK or OPEN mode is configured Enable WPS Setup AP Device PIN Device WPS Status Configured Device PIN Code 19710402 Push Button PIN
Network Authentication
WPA-PSK
Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys WPA Encryption WPA passphrase display
TKIP+AES
SSID:
Do_not_Connect
Disabled
Allow
Deny
MAC Address
Remove