Академический Документы
Профессиональный Документы
Культура Документы
KS158/KS168
This product is RFID access control system, which is currently one of the advanced access systems. It uses the latest central process unit (CPU) and memory chip of large capacity. There will be of no information loss even in case of power failure. It takes the latest HOMMARD technology, with strong power of three ways to open door: open by card read, open by card read adding with password, and open by password. The perfect security functions let the users feel much more safe, which include door state monitoring, alarm output, safety mode, anti dismantling, RFID card and password. While its functions of opening button, close notification, door bell, to be connected with NO. and NC. locks bring more operating easiness to the users. This product provides access control mode, which is safe and fully automatic, it is an ideal device for business organizations, offices, factories, residences and communities.
1 2 3
DC: Voltage 12V10%; current < 0.1A Alarm output: 100mA Electrolock output: 3A 92mm86mm22mm 11811823mm(Waterproof level: IP43)
2) Set open mode: Press 1 0 0 # by valid card only. Press 1 0 1 # by valid card and password. Press 1 0 2 # by val id card or password. Note: factory setting is valid card. Since the initial password can not be used to open door, If set to valid card or password mode, password for use should be modified. 3) Add user card.
4 5 6 8
8 9
Press 2 Input code read card # Note: the code should be three figures from 0001 to 2000, which should not duplicate. The code must be input, otherwise the card will be invalid. If add more than one cards, read the
1. Default value: Login password 8 8 8 8 , Password in common use 5 5 5 5 User password 1 2 3 4 2.Enter programming mode: Press * mode. 3.Function setup (should be in programming mode): 1) Modify login password. Press 0 new password # confirm new password # Login password # enter programming
second card directly after the first three-digit code is put in before pressing # . 4) Delete user card (three ways): A. Press 3 0 0 0 0 # to delete all user cards. B. Press 3 card C. Press 3 input code # to delete lost card. read card # to delete the corresponding
Technical Features
No Item Specification
5) Set the length of open time: Press 4 X X #. 4. Modify user password (no need in programming mode): after pressing * to read user card, the green LED flashes, then press # to enter
Memory capacity
500
cards
and
1000
cards
and
passwards Common use Keyboard Lock door monitoring safety mode External Reader backup data Card state
password modifying mode. Now input new password 6) Set safety mode: Press 7 0 0 # to disable this function. Press 7 cards, 0 1 # to read 5 invalid cards or valid enter 5 wrong passwords 5. of 4 figures, press again, press # and input the new password
password of user's card can't open the door alone , it is effective that can only use with the card together Resume the programming password: If forget the programming password , can use J2 on the main board to connect and resume the
then
successively, the system is locked for 5 minutes. Press 7 0 2 # to read 5 invalid cards or valid enter 5 wrong passwords
cards,
then
successively, the system activates alarm signal output. Note: factory setting this function is disabled. 7) Set up the password in common use: Press 8 Input code 0-9 # New password (password is four six 6.
programming password while dispatching from the factory short . This operation only resumes the programming password, the materials of the
7.
Green LED
Performance differences:
Two lights flashing in turn three times Flicker Flicker Rapid Flicker Flicker
figures),press password then press # enter. 8)Press 9 86 can resume getting and is dispatched from the factory setting up ; Code KS158 KS168
KS158 KS168