Академический Документы
Профессиональный Документы
Культура Документы
K e n n e t h G. B u d i n s k i
Printed in U.S.A.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
L i b r a r y o f Congress C a t a l o g i n g - i n - P u b l i c a t i o n D a t a
Copyright 9 2005 ASTM International, West Conshohocken, PA. All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of the publisher.
Photocopy Rights
A u t h o r i z a t i o n to p h o t o c o p y i t e m s for i n t e r n a l , p e r s o n a l , o r e d u c a t i o n a l c l a s s r o o m use, o r t h e i n t e r n a l , p e r s o n a l , o r e d u c a t i o n a l c l a s s r o o m use o f specific clients, is g r a n t e d by ASTM I n t e r n a t i o n a l (ASTM) p r o v i d e d t h a t t h e a p p r o p r i a t e fee is p a i d to t h e Copyright C l e a r a n c e Center, 222 R o s e w o o d Drive, Danvers, MA 01923; Tel: 978-750-8400; online: http:llwww.copyright.coml. The Society is not responsible, as a body, for the statements and opinions advanced in this publication. Printed in Mayfield, PA January 2006
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Foreword
THIS PUBLICATION, Preparing and Delivering Technical Presentations, was sponsored by the ASTM International Committee on Publications. The author is Kenneth G. Budinski, Technical Director of Bud Labs in Rochester, NY. This is the first edition of Manual 54 in ASTM's manual series.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cha ~ter 1: Message Strategy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cha ~ter 2: Audience Accommodation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cha ~ter 3: Researching Your Subject . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cha ~ter 4: Preparing an Oral Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cha ~ter 5: Intellectual Property Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cha ~ter 6: Selecting and Preparing Visual Aids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter 7: Delivering Your Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A p p e n d i x I: Guide for Preparation of Slides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Appendix Ih Sample Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A p p e n d i x Uh Presentation Checklist--Things to Consider in Preparing and Delivering a Technical Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A p p e n d i x IV: Suggestions from AV Professionals on Slide Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . vii 1 5 9 13 18 22 33 40 42 56 58
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Preface
This manual guides students, technologists, engineers, and scientists through the process of making an oral presentation. It can be used as a personal reference or as a text to teach students or employees how to make oral technical presentations. It is a companion to a previous book dealing with technical writing. That book devotes one chapter to oral presentations. This book is completely about oral presentations. It is almost certain, if you work in a technical field, that making oral presentations will be a job requirement. You may only do this once a year, month, or week, but whatever the frequency, your job success will be tied in some way to how well you make oral presentations. An oral technical presentation "sells" your technical work, as well as yourself. The problem addressed by this book is poor technical presentations. I have worked in U.S. industry as an engineer for more than forty years, and I cannot begin to estimate the number of "poor" technical presentations that I have squirmed through, the number of unreadable slides I have attempted to decipher, and the number of talks that have wasted my time. Most of the time, the speakers had useable knowledge and information to communicate; they just "botched" the communication step. The audience received little return for their time investment, and the organization received little return from the speaker's preparation time. This book is written by a still-practicing engineer, and the suggestions (called rules in the text) come from personal experiences (italicized anecdotes) in giving technical presentations. I have presented more than 100 papers at conferences and countless presentations in the workplace. Just about all of the problems that can occur have happened to me. My speaking situations range from the hallowed halls of Cambridge University to alongside an incredibly noisy factory floor tubing mill. The audiences that I have encountered range from one to one thousand. All of these experiences are distilled into a step-by-step procedure on how to make successful oral presentations-presentations that get your message across and achieve your objective successfully. There are seven chapters in this manual, which begins with commitment and ends with the evaluation of your presentation. The book addresses formal and informal presentations, including common meeting situations. It starts with how to develop a presentation strategy that accommodates your message and offers something of value to the audience. It tells you how to research a subject, how to prepare a presentation, how to protect intellectual property, and then how to prepare and use visual aids. It ends with a chapter on delivering your message and speaking successfully in front of any size group. I fervently believe this book will help anyone who reads it to become a better communicator.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
MNL54-EB/Jan. 2005
Message Strategy
Goals: 9 To understand how to develop a message strategy 9 To understand how to use this strategy to develop a presentation There are many situations that lead to an oral presentation, but once you commit to making a presentation, the first step that you need to take is to develop your presentation strategy. The presentation situation sometimes can serve as the foundation of your presentation strategy. For example, if you were asked by your supervisor to give a talk to the department on the proper use of material safety data sheets, you immediately know the objective (proper use of these sheets by department members), and you know the audience. All talks start with the five "Ws": what, who, why, where, when. The "what" is safety data sheets; the "who" is the department; the "why" is because the boss asked you; and the "where" and "when" can be arranged. If the situation is that you agreed to make a presentation to a technical society in your field of expertise, the five "Ws" are quite different. You need to determine the "whom." You must ask the person who invited you to speak to estimate the size of the audience, their probable backgrounds (e.g., mostly engineers, mostly students, mostly government employees, mostly factory workers, etc.). You must know to whom you will be talking. You must decide what information you want to convey. You must have a goal for your talk to this group (why), and of course, you must learn the date, time, and location of the talk as well as the audio/visual (AV) facilities that are available. On the other extreme is a talk to your work/school team. The who, where, and when are known, and you only need to develop what and why. In summary, a strategy needs to be developed for a talk. It sets the scope and provides the focus. It is as necessary as the strategy of a general going into battle. This chapter will discuss the five "Ws" and other elements of strategy, such as expectations, scope, length, follow-up, acknowledgments, and other talk details that need to be addressed early in the development stage.
If you are making a presentation to concerned citizens on a highway relocation, you need to define every technical term that you use and slant the talk to answer perceived concerns. A technical talk at a technical society meeting requires research to determine the background of the audience. If many attendees work in the steel industry, your talk should be a topic that will interest "steel people." If you are talking to co-workers, you will know what needs to be explained and what does not. Talking with managers is like talking to the general public. Many technical managers in the U.S. have no technical training. Human Resource (HR) or financial people head most hospitals in the U.S., and similarly, engineers no longer call the shots in manufacturing. You must explain everything in terms that even those without technical training will understand. RULE: Establish the "composition" o f your audience.
Why
Some public speaking texts may have a different order for their "Ws," but I suggest you establish "why" very clearly, maybe even before "who." All of our actions have motivations. We eat to stay alive; we exercise to make our bodies attractive; we study to gain knowledge, and knowledge leads to wealth, at least theoretically. Ask yourself why you agreed to give a talk. Will you get paid? Will it help your career in some way? Are you doing it to make sales contacts? Are you trying to mentor young engineers? Think about your motives--why you are giving a talk--and make sure that the talk addresses this motivation. [I agreed to give a talk to a chapter of a technical society in a nearby city because it would help publicize my company in that city. I gave a talk at a European Community Conference in Portugal last month to assess market conditions for my company in Europe.] RULE:
Who
Just as knowing the readership of a document determines how it is written, the intended audience determines what the talk will look and sound like. Audiences for talks fall into different categories.
Audience General public Peers Co-workers Managers Speaking Approach Only need to explain parochial terms Explain all in simple terms Do not need to explain most terms Explain all in simple terms
Now that you know to whom you are talking and why, you must decide on what you are going to say. I will have a later chapter on how to write a talk, but at this point you at least need to establish the subject and possibly the title. It is usually mutually beneficial to discuss subjects and titles with the person requiring a talk. You need to select a subject that will 1
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by by ASTM International Copyright9 2005 www.astm.org Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
be of interest to the p e o p l e w h o are likely to a t t e n d y o u r presentation. W h e n you are asked to give a status r e p o r t to m a n a g e r s on y o u r m a j o r p r o g r a m , the subject is essentially assigned. Similarly, the w h a t is "assigned" in a talk to allay fears of the general p u b l i c to a highway's relocation. Talks to co-workers are often assigned, b u t if, for example, you are asked to share w h a t y o u are w o r k i n g on with y o u r co-workers, y o u will have to t h i n k a b o u t w h a t w o u l d p r o d u c e the m o s t value in sharing.
vest significant effort. You m a y b e talking to a s c a n t audience. Similarly, a c o l l o q u i u m to g r a d u a t e students on a Monday after s p r i n g b r e a k is likely to be p o o r l y attended. This does n o t m e a n that the talk can be sloppily p r e p a r e d , b u t you m a y w a n t to be less f o r m a l for a small group. A small g r o u p even opens the possibility of using d e m o n s t r a t i o n s a n d s a m p l e s that are difficult with big groups. [I once gave a talk in a city that I had never visited before and was surprised to learn that this city had a festival that started the day o f my talk. The festival drew over a million people, and all roads out o f the d o w n t o w n area where I was staying were closed to traffic for a parade. Needless to say, I had to stay over and change my travel plans. ]
RULE:
You do n o t w a n t to tell y o u r co-workers o r a n y b o d y else s o m e t h i n g that they a l r e a d y know. All a u d i e n c e s w a n t n e w stuff. Re-runs will b o r e y o u r a u d i e n c e a n d reflect negatively on you a n d y o u r talk objective.
Expectations Where
There is n o t h i n g w o r s e t h a n having fifty p e o p l e s h o w u p for a talk in a m e e t i n g r o o m t h a t holds twenty (except m a y b e showing u p w i t h a tray full of slides o r CDs for a technical talk w h e r e the a u d i e n c e is at three tables in a huge restaur a n t hall c o n t a i n i n g fifty tables of couples eating o u t a n d groups celebrating occasions). Equally unnerving is giving a talk in a cavernous r o o m that seats 500, with only six p e o p l e showing u p for the conference. If you k n o w w h e r e the talk will be, y o u can design it to fit the situation. If I h a d k n o w n that I w o u l d be giving a talk to three tables of p e o p l e in a noisy public restaurant, I certainly w o u l d n o t have p r e p a r e d slides. I w o u l d have given a talk w i t h o u t the use of visual aids. There is not m u c h that you c a n do a b o u t i n a p p r o p r i a t e r o o m sizes at a conference. They are a l r e a d y assigned, a n d size is b a s e d u p o n the organizers' p e r c e p t i o n of relative interest in a p a r t i c u l a r subject. However, you often c a n c o n t r o l "where" in y o u r organization. Make sure that the r o o m is adequate, a n d k n o w w h a t AV facilities will be available to you. Most technical talks need visual aids. By t h e i r nature, they convey i n f o r m a t i o n , data, a n d ideas. Your talk strategy s h o u l d include the type of visual aids that you will use. We m e n t i o n e d y o u r "why." This is y o u r expectation. You expect to get a "reward" in s o m e fashion from y o u r p r e s e n t a tion, b u t there is a n o t h e r a s p e c t to the expectations associated with a p r e s e n t a t i o n . W h a t do y o u expect y o u r a u d i e n c e to get from y o u r p r e s e n t a t i o n ? If y o u r p r e s e n t a t i o n is to a technical society, you m a y have an expectation that the audience walks a w a y with the three key factors that control w e a r of steel m e t a l f o r m i n g tools. If y o u are talking to y o u r c o m p a n y m a n a g e r s a b o u t a p r o p o s e d r e s e a r c h project, y o u r expectation m a y be approval of $110,000 to fund the work. The expectation of a status r e p o r t to t e a m m e m b e r s m a y be that they realize that y o u r p a r t of the project is suffering b e c a u s e of p r o c r a s t i n a t i o n on the p a r t of o t h e r t e a m m e m bers a n d y o u w a n t t h e m to "get o n the stick" a n d develop a proactive role. W h a t e v e r the situation, you need to establish the e x p e c t a t i o n t h a t y o u have for the a u d i e n c e as well as yourself.
RULE: Establish your presentation expectations. What will they walk away with? What do you want to happen?
Presentation Length
RULE: Know as m u c h as possible about the location and AV capability o f the talk location before you start talk preparation.
All p r e s e n t a t i o n s need a n end. The U.S. Congress is the only o r g a n i z a t i o n I k n o w t h a t allows speakers to talk until the a u d i e n c e d i s a p p e a r s o r forgets w h a t they were a b o u t to vote o n - - a filibuster. S o m e very wise person, m a y b e m a n y centuries ago, invented the bell to e n d a teacher's lecture. [Thank you.] Everyone has e n c o u n t e r e d teachers that w o u l d go on for an eternity if allowed. Lecture timelines stop filibusters in college. Even if you are the b e s t s p e a k e r in the w o r l d a n d the u l t i m a t e a u t h o r i t y on a subject, p e o p l e can only a b s o r b w h a t the seat can endure. Oral p r e s e n t a t i o n s n e e d to be concise. They are n o t i n t e n d e d to s h o w h o w m u c h you k n o w a b o u t a subject o r h o w m u c h you did. They s h o u l d be a n a b s t r a c t of w h a t you k n o w o r did a n d be i n t e n d e d to give the a u d i e n c e s o m e useful nuggets to walk a w a y with. S o m e r e a s o n a b l e p r e s e n t a t i o n lengths are:
When
The time of a p r e s e n t a t i o n is always a strategy factor. S o m e times y o u m a y be asked to give a l u n c h t i m e p r e s e n t a t i o n . This m e a n s a s h o r t talk of l i m i t e d scope. If you are talking to the general p u b l i c a b o u t the h i g h w a y r e l o c a t i o n at a high school at 3:00 in the afternoon, the a u d i e n c e is likely to be m u c h different t h a n the a u d i e n c e at the s a m e high school at 8:00 in the evening. Technical m e e t i n g s on M o n d a y night in the U.S. d u r i n g football season need to be brief. Do not in-
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Audience
Students Other technical
Appropriate Length
1 hour 30 minutes plus 10 minutes for questions 20 minutes plus 10 minutes for questions 10 minutes plus 5 minutes for questions 10 minutes including questions Set by
people Managers
Team
Will they b e n e e d e d ? We m e n t i o n e d that visual aids are n o t u s e d for a c o m m e n c e m e n t talk o r a w a r d ceremony. They are u s u a l l y n o t a p p r o p r i a t e for a face-to-face p r e s e n t a t i o n to the d i r e c t o r of engineering. A p r o t o t y p e p a r t w o u l d be a p p r o p r i a t e , b u t n o t a slide talk. S o m e s i t u a t i o n s p r e c l u d e the use of s o m e visual aids. If the r o o m w h e r e the p r e s e n t a t i o n will be given does n o t have a video projector, a n d you do n o t have access to one, a c o m p u t e r - g e n e r a t e d slide s h o w w o u l d be e l i m i n a t e d for use in m a k i n g visual aids. [When I taught college evening
Safety talk
Co-workers Peers
courses, I knew that the only media available were a chalkboard and an overhead projector. All lectures were prepared with this in mind.]
Finally, do y o u need visual aids? Do n o t use t h e m unless they a d d value. That is the a n s w e r to the above questions. If you claim that seal failures o n h y d r a u l i c a s s e m b l y m a c h i n e s are the biggest cause of m a c h i n e downs, y o u s h o u l d have d a t a to s u p p o r t this claim. Your a u d i e n c e will w a n t to see a g r a p h o r a n o t h e r g r a p h i c that shows t h a t seal failures a r e w o r s e t h a n all o t h e r p r o b l e m s . In this case, a visual a i d gives credibility to y o u r thesis. On the o t h e r hand, if you are talking with c o - w o r k e r s a n d they all k n o w w h a t the seals look like, it is a w a s t e of their t i m e to show t h e m a slide of one o r to p a s s one a r o u n d .
Conference
conference-usually 20
minutes plus 5 minutes for questions 30 minutes and time to answer all questions
Project public
meeting
General public
P r e s e n t a t i o n length is a key p a r t of the p r e s e n t a t i o n strategy. One of the m o s t c o m m o n failures in p u b l i c speaking is exceeding a r e a s o n a b l e o r allotted time. If y o u exceed thirty m i n u t e s in a d i n n e r m e e t i n g talk, the a u d i e n c e m a y leave o r fall asleep. If y o u exceed y o u r t i m e limit at a conference, y o u will convey a negative i m p r e s s i o n of yourself. You k n o w t h a t y o u were given twenty m i n u t e s to speak; the a u d i e n c e w a n t s y o u to keep to y o u r allotted t i m e b e c a u s e they often have c o n c u r r e n t sessions, a n d this only w o r k s if everybody observes the schedule. There is a negative effect of talking too long for all of the p r e c e d i n g situations. Too s h o r t a p r e s e n t a t i o n c a n also have a negative effect. We have all b e e n in situations w h e r e a p e r s o n d i d n o t adequately cover the a d v e r t i s e d subject. We w a l k a w a y m u m bling that we d i d not l e a r n anything.
RULE:
D e c i d e on appropriate v i s u a l a i d s a s part of a t a l k
strategy.
RULE: Do n o t u s e ~suM ~ d s u n l e s s ~ e y a d d v M u e .
Handouts
S o m e conferences r e q u i r e that you h a n d o u t a copy of y o u r paper, a b s t r a c t o r even copies o f y o u r slides at a talk. [Avoid
RULE: An oral presentation must have the right length for the situation: not too brief, not a tome.
Media
Usually, the s i t u a t i o n of a n oral p r e s e n t a t i o n will d e t e r m i n e what, if any, visual aids you c a n use. If y o u are giving a c o m m e n c e m e n t speech, it is t r a d i t i o n a l to do it u n a i d e d . You p r o b a b l y c a n only use voice inflections, h a n d gestures, a n d b o d y l a n g u a g e to s u p p o r t y o u r t h e s i s - - n o g r a p h s a n d tables. M o s t technical p e o p l e [myself included] rely heavily on overh e a d a n d video projectors, c h a l k b o a r d s a n d the like in m a k ing oral presentations. Technical fields subsist on facts a n d data. It is n a t u r a l a n d p r o p e r to use visual aids in a presentation. However, y o u need to m a k e visual aids a c o n s i d e r a tion in y o u r talk strategy. 9 Can y o u use visual aids? 9 Are there s o m e that c a n n o t be used?
handing out material before a talk because people tend to read the handout rather than pay attention to you.] E v a l u a t i o n
f o r m s are s o m e t i m e s r e q u i r e d after a talk. S o m e t e c h n i c a l societies h a n d o u t question forms, a n d only w r i t t e n questions are fielded b y the speaker. In a n y case, h a n d o u t s s h o u l d be a c o n s i d e r a t i o n in establishing a p r e s e n t a t i o n strategy. If you were m a k i n g a p r e s e n t a t i o n to m a n a g e m e n t for p r o j e c t funding, a n a p p r o p r i a t e h a n d o u t (after the talk) w o u l d be a c o p y of the w r i t t e n p r o p o s a l . Of course, this m e a n s that you m u s t have a w r i t t e n p r o p o s a l on hand. If y o u do not, then the p r e s e n t a t i o n strategy m u s t include a w a y to d i s t r i b u t e the a p p r o p r i a t e h a n d o u t .
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Summary
Before you get into any of the specific details of an oral presentation, you need to develop a presentation strategy. You need to ask the five "Ws": "Who," "Why," "What," "Where," "When." You need to establish the talk expectations for yourself and the audience, and you need to start thinking about details like talk length, visual aids, and handouts. As an example, the following is a strategy on a talk that I want to present at an international conference that is held every few years at a university in England. I just received the call for papers, and I only know at this point that I would like to write a paper to lay to rest negative comments that I received on an abrasion test that I developed and proposed as an international standard. I have used the test for more than ten years on hundreds of abrasion problems, and I know that it works. Who--The audience will be international researchers in friction and wear. Based upon two previous conferences that I attended, the makeup will be mostly European, between 100 and 200 people, with a significant student attendance, because it is held at a very large university with technical activity in subject areas. Why--I want to establish the credibility of the test, get the standard approved, and possibly sell some test machines or do testing for others in this area. My primary motivation is test acceptance. The business aspects are secondary. What--I do not know the title of the talk, but I want to answer the following questions: Is abrasion by less than virgin sandpaper still abrasion, or is it something else? I received negative votes on my test proposal from researchers
who claimed that abrasion no longer exists once sandpaper is rubbed. This study will resolve the issue. Where--A small college within the university will be the conference site. The lecture room, the last time that I attended, was a well-equipped amphitheater with tiered seats for about 300 people. When--The conference is scheduled for October of next year with abstracts due in three months. This means that I have less than three months to obtain the test data. Expectation--I expect to convince the international community that an abrasion test using sandpaper that is run over more than one time still abrades. The conference proceedings will be published and archived. Ultimately, I want the test standard to be approved. Length--The last conference in this series limited the oral presentations to fifteen minutes, plus five minutes for questions. I will plan according to this. Media--I will use a computer slide show. I will only need to carry a CD. I will also bring overheads in case there are computer compatibility glitches. Handouts--I hope that they will not ask for one. If they do, I will give them an abstract or extended abstract. General--Since I sent my abrasion test machine to another laboratory for evaluation, I may ask them to collaborate on this paper. I will send an e-mail and assess their feelings about collaboration. This is the strategy that I developed for a yet-to-be written paper on yet-to-be completed work. This is my proposed way of developing a strategy for a message that ! want to deliver to others.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
MNL54-EB/Jan. 2005
Audience Accommodation
Goals:
9 Tailoring a talk to various audiences 9 How to obtain results from meetings All written documents should be directed to a particular readership. This requirement is even more important in oral presentations; an audience is assembled to hear a talk that was advertised to address a specific subject. They usually assemble in a defined space, usually a room. They are captive. You must accommodate them by delivering facts and information on the advertised subject. Formal talks will have a specific title like: Abrasion Resistance Testing with Abrasive Finishing Tape Informal talks in industry may be simply announced as a line on a team or department meeting notice: Review of P-10 friction tests--K. Budinski. A proposal to management may include a one-sentence abstract on their meeting agenda: Item on the agenda of the New Product Review Committee: K. Budinski--Proposes a pocketsize silver-halide consumer camera with a new film format and unique optical imaging system. An office celebration may be the least informal presentation that you may encounter: You are invited to a celebration of John Down's twentyfive years with the company. Conference Room 106 June 16, 2002 at 12:00 PM Refreshments will be served K. Budinski: Master of Ceremonies If you are chairing a meeting, you must present an agenda that tells the audience what they will hear at a meeting and why they should come: To: Metals Lab Personnel From: K. Budinski (meeting chair) Re: Monthly EWO project review Purpose: To share what was accomplished on each project during the past month. Objective: To keep EWO program on track and within budget. Expectation: All people having EWO projects report on progress in five minutes. Agenda: 1. Sharing of good n e w s - - ~ l 2. Balling project--Ralph Swartz 3. Profilometry--Pete Smith 4. Emulsion can polishing--Ruth Lure 5. Backside friction--Mary Hope 6. Resource allocation--Diane Doron 7. Action items--Ken Budinski 8. Closing remarks--All Of course, in this instance, the audience will expect to have the agenda items covered and to walk away knowing where the program stands. The p r o b l e m addressed in this chapter is that, far too often, presentations do not accommodate the audience. Attendees do not walk away with what is advertised. It is the purpose of this chapter to discuss audience accommodation for formal and informal presentations so that people get what is advertised from a talk. This chapter is aimed at making the audience the focus for preparation of a talk. I will discuss audience accommodation for formal and informal presentations and meetings, as well as how to conduct meetings.
Formal Presentations
The first step in audience accommodation is to determine the composition of your audience. As mentioned in the preceding chapter, various presentation situations will have certain types of people in the audience. A talk at a university will have a young student audience with a few professors who may be interested in your topic. This is a tough audience. You need to include significant background material to bring the students up to speed on your topic, while you need to include enough new information and theory to keep the professors interested. Both students and professors will have the expectation of learning something of value from you. So what do you do? You prepare a talk with "meat" for both. If you are presenting on a technical subject to a group that is not in your field, you must do what you can to include material that you perceive interests them. You can usually deduce an appropriate topic from discussions with the person who requested the talk. Ask what they work on; ask where most audience members work; ask your host about what would interest the audience. Sometimes you can glean the composition of your audience at a formal conference by simply scanning the names and affiliations of the other speakers. Many international conferences on the specific subjects in my field are attended by only hundreds of people, and there may be a hundred papers presented. The other speakers are potential members of your audience. Note whether they are academics or from the industry/business. If they are mostly academics, give them mostly theory and models. If they are mostly industrial people, try to give them some information that pertains to their industry. 5
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by by ASTM International www.astm.org Copyright9 2005 Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Do similar things with presentations within your organization. Note what departments the invitees come from, and design your presentation to give them something that applies to their operation. If the invitees are mostly managers, give them background material and budget facts. Go slim on theory and models. What I am suggesting is that for formal presentations you need to expend significant effort in deducing the composition of your audience so that you can meet their expectations.
gical jargon and to present data in a way that is relevant to chemists. Stress what you learned about chemical surface treatments, surface layer thickness, drying cycles, aging, etc.
RULE: Team accommodation requires a presentation level tailored to the "mean" team composition.
Department meetings are another common presentation situation. Establishment of audience composition is still required. If you work in a materials laboratory, the composition may be" 9 Three metallurgists 9 Two plastics engineers 9 Two tribologists 9 One surface scientist 9 Two analytical chemists 9 Five laboratory technicians 9 One manager 9 One secretary Seven of the eighteen department members may need background material when you are discussing the details of a technical subject. If you are talking about budgets, no background will be necessary. Your presentation should be at a level that all can understand. There is often a tendency in making a presentation to co-workers to be sloppy, to be careless in observing time limits, and to have an ill-prepared message with unreadable and careless visual aids. [I worked under a number of department managers who regularly made overheads often or twelve point full-page typed documents as overheads. Of course, these are not visual aids. Nobody can see them, and using overheads like these insults the audience. It says that you do not [eel that they are worth the effort to make a proper presentation. ]
Informal Presentations
The most common audience for informal presentations in U.S. industry is teams. Since about 1990, there has been a move to have major projects assigned to a team rather than an individual. Teams, allegedly, produce faster and better results than an individual. So teams meet on a regular basis, and each team member is expected to present any significant results obtained since the last team meeting. [I have been on teams addressing a production crisis that met daily; most production related teams meet weekly or biweekly; research and development teams usually meet monthly.] Obviously, the audience for a team meeting is the team. You should still dissect the team to ensure accommodation. You need to tailor your presentation to the team. For example, if you are a metallurgist in a team comprised mostly of chemists, you should design your talk to avoid metallur-
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
tell the person or persons trying to dominate the discussion to let others speak. If you enforce your agenda and its time limits, the dominating problem should never arise. RULE: Limit times for p e o p l e to s p e a k at meetings, and enforce them. Above all, allow all attendees to participate in team meetings. You are not really a team unless every person participates. Inclusion can be promoted by starting a meeting with each person sharing good news--some positive happening in their work or personal life. This can "break the ice" with audience members who may be shy or reticent. Asking each participant to state what he or she is going to work on between this meeting and the next meeting can be an appropriate conclusion of a team meeting. RULE: Do not let individuals d o m i n a t e a meeting.
Conducting Meetings
Conducting a meeting is a special form of informal presentation. Some meetings are formal where who said what is documented and there is a formal agenda, protocol, and Roberts Rules of Order apply, but such meetings are few and far between. [When I started in local politics, the town committee meetings were conducted in a very strict manner, but they have degraded to more o f a social get-together. I participate in the development of international consensus standards in a standards organization and meetings on adopting standards and member balloting of these standards are carried out in a formal format with votes and discussions recorded.] The meetings that most are likely to chair are team meetings or where you are put in charge of some function, item or activity and you must call meetings to accomplish your charge. The audience composition rule still applies. If you were assigned to the task of a safety audit of your work area, you probably need to start by calling a meeting to tell your co-workers what you expect them to do. If the department contains an office area and a machine shop, you need to make it clear what is to be done in each area and what the machinists are to do and what the office workers are to do. All meetings should have a published agenda, and a format that works well for many meetings is:
RULE: Develop a system to allow each attendee to participate in team meetings. Many organizations conduct meetings via phone a n d / o r videoconference. If you do not have a face-to-face situation, definitely begin phone meetings by each person signing in and end with each signing out with an appropriate comment pertaining to what was discussed. This is audience participation.
Whom you want to attend Your name The title of your meeting Date, time, place What the meeting is about The end results What you want from this meeting The business items The responsible person 1. J. Doe 2. J. Bronson 3. J. Smith
Summary
Audience accommodation can take many forms, but basically, if you want your message to be accepted, you must tailor it to your audience and then do whatever is necessary to bring your audience "on board." They must feel sincerity on your part. When you chair a meeting, you must make every effort to allow all attendees to participate. You m u s t - absolutely must--prevent individuals from dominating. You must hold to time allotments in your presentations, and you must enforce speaking limits when you are in charge of a meeting or other oral presentation. I will end my audience accommodation discussion by recounting the most effective way of enforcing speaker limits that I have encountered. [Last week I attended an international conference on tribology research at a small New England college. There were about 130 attendees, including about 41 students who presented posters. The conference organizers went out of their way to encourage the students to mingle and talk with the senior researchers in attendance. As a way to introduce the students and their research to all, the conference chair asked each student to present a two-minute talk on why attendees should read his or her poster. Needless to say, with 40 posters, if each even talked for five minutes, it would be an unbearable sitting situation. So
Supplying these data prior to a meeting accommodates your audience. It makes it clear why they need to attend and whether anything is required of them. Attendees will be more prone to attend if they know what is on the agenda prior to the meeting. A department cleanup meeting should have an expectation something like this: All employees should leave this meeting knowing exactly what cleanup tasks they need to do and by when. RULE: Always publish a detailed m e e t i n g agenda. If y o u do not have one, do not meet. A final thought about meetings--very often, meetings can become dominated by a single person or by a few. If you chair a meeting, never allow this to happen. Be assertive, and
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
the chair allowed 13 speakers each day and enforced the twominute time limit emphatically. Each student was allowed no more than two overhead visual aids. There was a large clock with a second hand viewable by the speaker, and when the twominute time limit was reached, the conference chair swatted
the speakers' overheads from the projector with a flyswatter. Concurrently, the vice-chair sounded a very loud moose call. Only two of the forty got swatted and moosed. It was the most effective enforcement of speaking limits (audience accommodation) that I have witnessed. ]
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
MNL54-EB/Jan. 2005
Examplem"Acoustic i m p e d a n c e
problems."
to solve ball b e a r i n g
The feature t h a t you w a n t to p r e s e n t is "acoustic impedance;" the "hook" is to solve ball b e a r i n g p r o b l e m s . People a r e busy. They do n o t w a n t to c o m m i t a n h o u r of their precious time unless there is s o m e tangible return. If they can l e a r n s o m e t h i n g that will help t h e m in their job, they will come. If y o u have s o m e t h i n g to p r e s e n t t h a t will help others, m a k e it k n o w n in y o u r title. Advertise! RULE: Your talk title is y o u r m o s t i m p o r t a n t a d v e r t i s e m e n t . C h o s e it w i t h d u e c o n s i d e r a t i o n .
Gathering Facts
You c o m m i t t e d to m a k e a n oral p r e s e n t a t i o n ; you carefully selected a t i t l e - - n o w you need to p u t y o u r m e s s a g e t o g e t h e r in y o u r mind. S o m e c o m m o n p r e s e n t a t i o n situations are: 1. You c o m m i t t e d to a n i n f o r m a t i o n - s h a r i n g talk. 2. You are m a k i n g a p r o p o s a l to m a n a g e m e n t . 3. You h a d a n a b s t r a c t a n d p a p e r a p p r o v e d for a p r e s e n tation at a conference. N o w you m u s t p r e p a r e y o u r talk. 4. You are t e a c h i n g a course. In the first instance, the a u d i e n c e will b e relying o n y o u to p r o v i d e useful i n f o r m a t i o n on the subject in y o u r title. You m u s t give the a u d i e n c e s o m e t h i n g that they do n o t alr e a d y know. Give significant t h o u g h t to w h a t that m i g h t be. If y o u are talking a b o u t electroplating, m e n t a l l y scan y o u r k n o w l e d g e of the subject to arrive at s o m e topics or d a t a that are n e w to you. If y o u w o r k in the field, a n d the m a t e r i a l is new to you, t h e r e is a good possibility that it will b e n e w to y o u r audience. However, do not s i m p l y p a r r o t p a p e r s o r c l a i m s of others. You are the expert; tell the a u d i e n c e w h a t y o u k n o w a b o u t these new subjects. F o r example, if you tried a n e w type of electroplating, a n d it was very p r o n e to n o d u l e f o r m a t i o n , then p r e s e n t y o u r facts in this area. Do not r e p e a t s u p p l i e r claims. RULE: If y o u are s p e a k i n g as an expert, p r e s e n t n e w i n f o r m a t i o n that y o u b e l i e v e to b e fact. If y o u have never u s e d a p a r t i c u l a r plating process, y o u can cite test results of others a n d let the a u d i e n c e form t h e i r 9
Titling
As in the case with w r i t t e n d o c u m e n t s , the title of a presentation m a y be the m o s t i m p o r t a n t w o r d s in the p r e s e n t a t i o n . It is a l l - i m p o r t a n t w h e n a t t e n d a n c e at y o u r p r e s e n t a t i o n is optional. If you are p r e s e n t i n g a p a p e r at a conference, the attendees frequently only have y o u r title as an i n d i c a t o r of w h a t y o u will b e talking about. It d e t e r m i n e s w h e t h e r they d e c i d e to a t t e n d o r not. The s a m e thing is true in a n industrial o r o t h e r o r g a n i z a t i o n w h e r e y o u a r e p r e s e n t i n g a talk for i n f o r m a t i o n sharing. Your title is y o u r advertisement. Too long of a title m a y scare off a t t e n d e e s b e c a u s e they fear t h a t you will be a w i n d b a g w h o goes on forever.
Example--"The use
Example--"Bearing clearance"
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by by ASTM International Copyright* 2005 www.astm.org Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
own opinion, but it is best never to go down that road. Talk about what you know from your own work. A proposal to managers requires supreme accuracy in figures. Most managers only respond to potential savings or profits. They want facts to back up claims. You need to gather facts from reliable sources and cite those sources. If you are proposing a new manufacturing process, you need to show the cost per piece of the present process compared to the cost per piece of the proposed process. You need details of the project cost, and you need to convince the managers that spending on your proposal will bring more savings than spending on another proposal. The believability of your data is a function of the reliability of your information sources. In the example of a new process, the industrial engineering department will have data on the current cost per piece, and they must agree with the new cost per piece that will result from your proposal. Production estimates should come from the production control department (in writing), and the capital cost should be a firm quotation from the equipment fabricator (also in writing). Labor costs should show a breakdown of hours and the hourly labor rate. In other words, have well documented facts from reliable sources.
Bibfiographic:
http: / /www.elibrary.com/s /edumark/ http:/ /www.dialogweb.com http://www.loc.gov/catalog (Library of Congress)
Searches:
http:/ /www.SIPreports.com http:/ /umav.his.com http: / /www.scirus.com
You also must become conversant with the models and theories that pertain to your subject. You will have to correlate your research results with these theories and models.
The situation of gathering facts for a paper almost always requires a literature search. It is required by all technical societies that I know of, and all reviewers look closely at cited references and the validity of your references. Table 1 is a list of reference sources from library professionals. A secret of senior technical researchers is to get a reference or two on your subject and to scan their references for other pertinent references. Also, some books are very "bibliographic" in their referencing. Scan these for potential references that pertain to your subject. You must do whatever you can to determine whether the work that you are going to do or did has not been done before. Some recommended U.S. websites:
General Reference:
http: / / www.google.com http :/ / www.atomica.com http :/ / www.amazon.com http:/ /www. nist.gov
Standards:
http :/ / www.nssa.org http :/ / www.ansi.org http :/ / www.astm.org
Databases:
Safetytatmheets ThomasRegister Patents--U.S. Patents--Europe
RULE: http :/ / www.siri.uvm.edu / index.html http:/ /www.thomasregistercom http :/ / www. uspt o.gov http :/ /www.european_patent.office.org / espacenet/ Teach f r o m a text, or supply appropriate r e f e r e n c e material to students.
The following summarize gathering of facts for a technical presentation:
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
9 9 9 9 9 9 9 9 9
E s t a b l i s h the n e e d for y o u r work, a n d believe in it. S e a r c h for a p p l i c a b l e theories a n d models. Make sure t h a t y o u r p r o p o s e d w o r k h a s n o t b e e n d o n e already. Ask o p i n i o n s of o t h e r s o n y o u r p r o p o s e d work. Be c u r r e n t in y o u r l i t e r a t u r e s e a r c h w i t h o u t ignoring significant works in the past. Teach to a text. Use l i b r a r y a n d I n t e r n e t sources. D o c u m e n t y o u r d a t a sources. Save references for d i s c u s s i o n of results.
of Detail
If you will have twenty m i n u t e s for y o u r p r e s e n t a t i o n , y o u c a n establish a t i m e b u d g e t like the one suggested in the p r e c e d i n g table. Of course, y o u c a n vary this t i m e b u d g e t as a p p r o p r i a t e for the p r e s e n t a t i o n , b u t all of these e l e m e n t s n e e d to be present, a n d all need a t i m e allowance. S o m e p r e s e n t a t i o n s by t h e i r n a t u r e do n o t need r e c o m m e n d a t i o n s , so this e l e m e n t is optional, b u t only this one. F o r m a l p r e s e n t a t i o n s m a y o r m a y n o t c o m e with a n assigned t i m e allowance. If not, establish one yourself. T h e n y o u n e e d to b u d g e t times for the e l e m e n t s of y o u r presentation.
Countless oral p r e s e n t a t i o n s fail b e c a u s e the s p e a k e r covers too much, covers too little, covers i n f o r m a t i o n inadequately, o r "overdoses." H o w does one decide h o w m u c h detail to include in a talk? I do n o t k n o w o f a formula, b u t I have h e a r d rules-of-thumb, such as: p l a n on two m i n u t e s of discussion p e r slide. Thus, a t h i r t y - m i n u t e talk c o u l d be h a n dled with fifteen slides. W h a t if y o u do n o t use slides? The correct a n s w e r to the right a m o u n t of detail is t h a t it dep e n d s o n the n a t u r e of the talk.
RULE: Formal presentations require a time allowance for each required element (introduction--3 minutes; p r o c e d u r e - - 5 minutes, etc.).
I n f o r m a l p r e s e n t a t i o n s need the s a m e e l e m e n t s of a form a l p r e s e n t a t i o n , b u t s o m e elements m a y n o t r e q u i r e a specific t i m e allotment. F o r example, you are a t t e n d i n g a team meeting, a n d you have b e e n asked to p r e s e n t w h a t y o u acc o m p l i s h e d on the project since the last m e e t i n g a w e e k ago. You k n o w from the m e e t i n g a g e n d a that five p e o p l e will rep o r t on their work, a n d the m e e t i n g is s c h e d u l e d for a n h o u r w i t h one-half h o u r allowed for reports. This suggests a t i m e b u d g e t of six m i n u t e s for you. Since you will be talking w i t h t e a m m a t e s , there is no need to p r e s e n t b a c k g r o u n d inform a t i o n o n the project, only o n the w o r k t h a t you d i d since the last week: W h y was it n e e d e d ? - - 1 minute. You need to p r e s e n t the details o f w h a t y o u did: P r o c e d u r e - - I minute. You need to p r e s e n t y o u r results a n d d i s c u s s i o n - - 3 minutes. E n d w i t h y o u r p a t h f o r w a r d - - w h a t do you p l a n to do n e x t - one minute. This b u d g e t is p r o b a b l y too tight. There is n o t time for questions. Take a m i n u t e o u t of the p r o c e d u r e a n d i n t r o d u c t i o n . Using the t w o - m i n u t e s / p e r slide rule-oft h u m b , y o u r five-minute talk c a n have no m o r e t h a n two d a t a charts o r graphs. Of course, use w o r d slides for y o u r i n t r o d u c t i o n a n d closure. So this is h o w you should a p p r o a c h a n i n f o r m a l talk.
Situation
Formal t a l k / p a p e r
Informal talk
Proposal
Teaching
RULE:
M a k e a t i m e budget for the elements of an i n f o r m a l talk. I n f o r m a l talks need the s a m e logic as a f o r m a l presentation, b u t e l e m e n t s m a y be c o m b i n e d to suit the p r e s e n t a tion situation. Proposals also need a t i m e allowance, a n d they m u s t c o n t a i n c e r t a i n elements, b u t since "sales features" are m o s t i m p o r t a n t , they need to be the focus. If you have twenty m i n u t e s for y o u r p r e s e n t a t i o n to m a n a g e r s , y o u m a y have a talk b u d g e t that looks like this: 9 W h y the p r o j e c t is n e e d e d - - 5 m i n u t e s 9 The details of the project p l a n - - 2 m i n u t e s 9 Feasibility of y o u r plan: w h y y o u t h i n k it will work, supporting facts/data--3 minutes 9 The p r o p o s e d t i m e l i n e - - 2 m i n u t e s 9 R e c o m m e n d a t i o n : specific, w h o do y o u w a n t to do what--3 minutes 9 Questions--5 minutes
F o r m a l p r e s e n t a t i o n s al-~ost always c o m e with a n assigned t i m e limit. Your t i m e allowance s h o u l d b e the basis for y o u r p r e s e n t a t i o n . All f o r m a l p a p e r s have the s a m e b a s i c elements.
Time
Introduction Body Background 3 3 8 4 1 1 minutes
Closure
Recommendations
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Talks to m a n a g e r s need to include h a r d n u m b e r s a n d w h e r e you got them. Be specific in all statements, a n d do n o t waste y o u r time allowance on m e a n i n g l e s s statements. "This is the greatest coating, a n d it will c o m p l e t e l y e l i m i n a t e c o r r o s i o n p r o b l e m s on the decorative b r a s s c o m p o n e n t s on o u r faucets." Superlatives like the above reek of snake oil sales a n d are a waste of y o u r valuable t i m e allowance. Present pertinent c o r r o s i o n d a t a on the c o a t i n g from the literature o r supplier, a n d s h o w w h a t specific p r o b l e m s the coating m a y prevent: "The coating has a h a r d n e s s of 1500 HK, c o m p a r e d with a h a r d n e s s of 120 for the u n c o a t e d brass. The coating could e l i m i n a t e s c r a t c h i n g in m a n u f a c t u r e a n d use." Teaching is a special oral p r e s e n t a t i o n . Teaching requires the basic elements of a formal presentation. A teaching lecture has a time allowance. It also r e q u i r e s a budget. You need an i n t r o d u c t i o n to tell the students w h a t you are going to cover a n d w h y it is i m p o r t a n t . If y o u have one h o u r allotted, decide on a n a l l o w a n c e for questions, p r o b a b l y ten minutes. Now y o u need to b u d g e t the r e m a i n i n g fifty minutes.
Summary
I r e c o m m e n d that you use a time b u d g e t in all p r e s e n t a t i o n s a n d let this t i m e b u d g e t d e t e r m i n e the a m o u n t of m a t e r i a l t h a t y o u present. If y o u r b u d g e t h a s five m i n u t e s for results, you c a n n o t s h o w the a u d i e n c e ten g r a p h s of data. Presenting too m u c h is the m o s t c o m m o n p r e s e n t a t i o n p r o b l e m . [Last
month I attended a research conference where all speakers were invited international experts. Just about all of them presented too much information. Most used computer slides and frequently they had two or more graphs on each result slide. I could not read most graphs, even though I moved closer to the screen each day. Also, most had to skip the summary of their work, their thesis, because they spent too much time going into the details on the graphs that the audience could not see. Many of these "experts" would have benefited from a refresher on presentation techniques. ]
Every p r e s e n t a t i o n is different in content, b u t the m e t h odology of "scooping" a p r e s e n t a t i o n is the same. First, you m u s t establish y o u r message, then carefully title y o u r presentation, t h e n evaluate the a u d i e n c e and situation to d e c i d e on the level of detail to include. Proposals n e e d h a r d n u m bers, facts, a n d few words. F o r m a l p r e s e n t a t i o n s are abstracts of the w r i t t e n papers. Most conferences have a time budget, such as thirty minutes, for a paper. This will serve as the basis of y o u r time budget. Decide on the p o r t i o n s allotted to introduction, p r o c e d u r e , results, discussion, a n d closure. K n o w i n g that y o u have only five m i n u t e s for y o u r i n t r o d u c t i o n , list the f a c t o r s / i n f o r m a t i o n that must be conveyed in this section, a n d m a k e sure that it is only five m i n u t e s long. This kind of b u d g e t i n g m u s t be d o n e for all presentations. The d a t a a n d facts for y o u r p r e s e n t a t i o n d e p e n d on the situation, b u t as I have m e n t i o n e d , a formal p a p e r is usually b a s e d u p o n a w r i t t e n report. The facts in the w r i t t e n r e p o r t s are the ones u s e d in the p r e s e n t a t i o n . Visual aids such as g r a p h s c a n c o m e directly from the report. I n f o r m a l talks to t e a m s m a y be b a s e d u p o n w o r k d o n e since the last meeting. Your results are the facts that y o u need to p r e p a r e the presentation. If you a r e teaching o r giving a p r e s e n t a t i o n n o t b a s e d u p o n c o m p l e t e d work, the d a t a a n d facts that you c a n use to develop y o u r p r e s e n t a t i o n can c o m e from a n y s o u r c e - from p e r s o n a l interviews to the I n t e r n e t - - b u t the facts m u s t be referenced a n d verifiable. Refereed j o u r n a l s are the m o s t reliable sources of technical i n f o r m a t i o n . Use them, b u t rem e m b e r that concision is essential. Only p r e s e n t the inform a t i o n n e e d e d to s u p p o r t y o u r m e s s a g e o r thesis.
Time
Introduction Body
5 minutes 40 minutes
Closure
5 minutes
remember
9 Questions
10 minutes
S o m e teachers are m a s t e r s of their craft a n d b u d g e t times automatically, b u t novices n e e d to have a t i m e budget, stick to it, a n d be sure to deliver a m e s s a g e of value to the students.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
MNL54-EB/Jan. 2005
9 How to prepare aids Hopefully I have made the case for a time budget for a presentation successfully; now I will address what goes into your time budget. How do you prepare what you will say in the introduction, the body, and all elements of your talk? Do you write every word that you are going to say in a talk? Do you prepare flash cards to keep you on track in your presentation? Sometimes, yes; sometimes, no. It is the purpose of this chapter to discuss a variety of speaking situations and how to prepare a talk for them. My objective is to have you, the speaker, adopt a system of preparing talks that works for you. The secrets to an effective presentation are sincerity, truth, and confidence. You must believe in your message, it must contain information that you believe to be correct, and you must have the confidence that you will deliver that message to your audience in a forceful manner. A well-prepared talk will supply the confidence component. This chapter will cover preparing an outline for a talk, writing a talk, and preparing delivery aids.
people whom you want to receive the information will not read your twenty-page report, but they may sit through a twenty-minute presentation. The way that this process works is to read the introduction and make visual aids in the form of slides using 3" x 5" cards. Number the cards, and put what you want to show to the audience in the left portion of the card:
Development of macroprofilometry
Title
Of course, an introduction needs to show why the work was done and why it is important. Develop a slide to stress the points that you want to make in these areas.
Need: Conventional profilometry cannot quantify large wear profiles. Importance: We need to measure scoring to quantify engine lubrication effectiveness.
RULE:
Make a n outline for all you are going to say,
presentations; k n o w w h a t
Formal talks based upon a report or paper may be the easiest talks to prepare. You simply use the document as your outline. Glean introductory remarks from the introduction. Use section heads from the body as section heads for your talk, and the conclusions and recommendations can usually be used as they appear in the document. A very simple technique that has been used by audio/visual professionals for decades is to make slides or overheads by abstracting the document that you are presenting. Oral presentations are abstracts of a longer work. You are giving a twenty-minute talk on your report on surface texture measurements using profilometry (an electronic stylus device that senses surface features such as roughness). The report is twenty pages long, and you know that many
Another benefit of this technique is that it limits the number of words that you put on a slide. You simply cannot write a paragraph in the allotted space, and this is probably why this technique was invented. It forces concision. It makes you abstract paragraphs into a few words. Next, make slides for your purpose in giving the talk and the objective of the body of work described.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by by ASTM International Copyright9 2005 www.astm.org Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
13
Objective: We hope to demonstrate to companies that develop profilometers that these devices can be used to measure macroscopic surface features.
your audience, and make a time budget for the talk. All the steps that I have been advocating are necessary, but they may take only minutes if you are very familiar with the assigned topic. These levels of talks should have visual aids, if for no reason but to focus the attention of the audience. Visual aids provide you, the speaker, with guidance as you present your message, and give the audience visual reminders of the points that you are making. They are more likely to accept your message if you use visual aids to complement your words. Assuming that your assigned topic is wearing safety glasses in the laboratory area, the talk preparation steps may look the following: Title: Message: Importance of wearing safety glasses in the laboratory People have been lax. On any day, one can see a dozen or so people from the department or outside the department not wearing safety glasses in areas where they are required. There is a very viable injury risk in not wearing glasses--state examples--and there is the possibility of a fine from regulatory inspectors. I will present some suggestions on how to improve conformance. Twenty department co-workers, all whom know the safety glass policy. (10 minutes) 1 minute 2 minutes 2 minutes 5 minutes
The format of the talk is simply the sections in the report and visual aids on details in each section.
Instrument 5
Development
Prototype Photo
Results on Scoring
Resultson
/8
Calibration
GearTeeth
1
11 DataSummary [ 12
Graphon ~ ] Calibration
-t
Cl~ I
RULE:
Standard Data
Standard Benefits
ocuion
Importance of safety glass use Seriousness of problem Suggestions for improvement Discussion and audience agreed-to action plan
Talk Overheads:
Recommendations
Title: Importance of Problem: Statistics on
wearing safety g l a s s e s [ in the laboratory ] The outline is complete, and so are the visual aids that you will use. You simply make the slides. The word slides can be made on a word processing program or a slide generation program. Data can be imported, but r e m e m b e r that if data are projected, they must be readable.
violations
Purpose: Review
----7
Problem
Objective: Get
conformance
Do not put anything on a visual aid that cannot be r e a d b y a/l. Project t h e m a n d t e s t readability.
Su2gestions:
---T
Preparation of informal presentations depends on the presentation situation and what y o u have to work with. If you did a failure analysis for a production department and the department wants you to present your results at its regular production meeting, you can use your informal report to make overheads like the formal talk example. If you are asked by the boss to present a talk at the research department meeting on a particular safety issue, you need to establish a strategy--research the topic, analyze
l 2. 3.
---7-
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
The talk is prepared when you think of suggestions for improvement and research fines and eye accident records to use to show the importance of wearing safety glasses to avoid eye injuries. The safety department can supply these data. You must also have data to show that there are frequent violations. Do your own audit of necessity. Go into the lab once an hour for three days, and record the number of incidents of people not wearing their safety glasses. The talk can be ended by hand writing an overhead with the actions that the audience agrees to put into action. If they are a part of the presentation, it is more likely that you will meet the presentation objective--no fines and no eye injuries. Preparing a proposal is exactly like a formal talk. You start with your written proposal and abstract it into visual aids. The important thing to remember in preparing a technical proposal is that there will probably be managers in the audience who have no idea what inductively coupled plasma spectroscopy (ICP) is, so be very aware of jargon and technobabble. You must craft your message into a presentation that could be understood by any person in your organization. Your overheads or slides must be absolutely readable. A poor presentation can have a negative effect on your request.
Writing a Talk
As I will discuss under Presentation Techniques, talks should not be read, however, some presentation situations make it advisable. Almost all politicians speak from a prepared manuscript, and ad-libbed talk can produce some statements that later cause problems. The classic example is the time when a Vice President of the United States spelled "potato" wrong while telling a group of young people to be diligent in their studies. Ten years later, the public remembered this verbal slip. [Once I had to give a lO-minute talk at a ceremony to give scholarships to engineering students. I selected a humorous (to me) theme: to show how engineering changed for the worse over the years. I poked fun at meetings and the computer hassles that are now common. The woman who types and edits my work told me she did not like my talk. She was right. My original talk would be inappropriate. So I started over with a different theme (focusing on engineering as a great profession), and the talk was a big success.] The point of this story is write important talks, but also to have them reviewed by a trusted person for appropriate content.
RULE: Proposals n e e d extra care in preparation--sell with facts and few words.
When you teach, the outline is visually what you use to give the lecture. Figure 1 is an example of a lecture on a materials engineering subject. It comes from the textbook chapter on the subject. You read through the chapter. Use chapter subheadings as subheads for your presentation, and then make notes under each subhead showing important points under each. [When I taught engineering materials, I used to make an overhead of my lecture outline and show it to the students to show what we would be covering in the lecture. They seemed to appreciate knowing where I was going.]
RULE: When you teach, let the students k n o w what you are going to cover in your lecture.
Formal papers and technical presentations do not usually need to be written because they are based upon a written document that contains all details of what was done and the results of what was done. Probably the number one weakness in formal presentations is failure to tell the audience why the work was done. [I have sat through countless technical papers where the speaker describes intricate experiments and extensive evolution of test results yet omits why he or she was doing all this work. Who needs a PVD thallium coating on gallium arsenide? I leave these talks with the impression of "So what? Who need this? How does it make a product or solve a problem?'] Audiences do not want to waste their time. If you do not show the need and importance of the work on which you are reporting, the audience will not be interested. You must try to link what you are talking about to the audience. This is done in the introduction. Introductions need to be written to at least include these elements: Background-The situation that prompted your work and why your work is important. Purpose of the talk--Why are you giving this talk? What is the long-term value of the work that you are reporting? Scope of work Project/program boundaries. Format of t a l k ~ W h a t aspects of the work are you going to talk about?
Lecture on: DiffusionTreatments 1. Processes: (Important points) 9 Gas - description, production suitability 9 Salt - description 9 Vacuum - description, advantages 9 Pack - description, solid to gas 2. Theoretical Consideration: 9 Ficks Law 9 Diffusion coefficients
Fig. 1--Outline for a teaching lecture.
Objective of work
This part of your talk should be written, and an abstract of your message should be in each section of the body.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Introduction:
Background
Scope: Format:
cause you will always o m i t s o m e o n e a n d do h a r m , w h i c h is o p p o s i t e to y o u r intention. [Last month, I saw a different type
Purpose: Objective:
2. 3.
of acknowledgment that I would like to share. This person had a computer generated acknowledgment slide with a statement like the preceding, and under the statement, she had small color photos of the "Team" with their names under their photos. There were four, and the slide was quite attractive in its layout. I mention this because digital photography makes it easy to paste photos on a slide, and I found it interesting to see the faces of the behind-the-scene workers. She did not name them--we could all read them in the ten seconds that the slide was up. It was a nice acknowledgment.]
4
Body:
Subhead 1:
Subhead 3:
RULE:
Subhead 2:
Conclusions:
1. 2. 3. 4.
Recommendations:
1. 2. 3.
I n f o r m a l talks a n d teaching lectures m a y need p o r t i o n s written. If you w a n t to say certain things w i t h o u t w a n d e r i n g a n d wasting the audience's time, you m a y w a n t to write those portions. And then, do n o t r e a d w h a t you wrote. Only the P o p e a n d politicians n e e d to r e a d a talk w o r d for word. My suggestion is to write the i n t r o d u c t i o n a n d closure to m a k e sure that b o t h of these key e l e m e n t s a r e d o n e properly.
acknowledgments from Academy Award winners. Some go through a litany that includes every studio employee from the CEO to the person at the studio parking lot gate.] Audiences
c a n accept a 30-second a c k n o w l e d g m e n t - - n o more. S o m e speakers start their talks with a c k n o w l e d g m e n t s . This is d e a d wrong. It distracts the a u d i e n c e before they even k n o w if they w a n t to h e a r w h a t y o u are going to say. Ack n o w l e d g m e n t s belong at the e n d of a talk, a n d I r e c o m m e n d that you carefully write, edit, a n d review them. They c a n be p r e s e n t e d in a w o r d slide that you s h o w to the audience for ten s e c o n d s after y o u r talk is c o m p l e t e d a n d you b e g i n to take questions.
RULE:
M a k e p r e s e n t a t i o n a i d s t h a t f e e l right for you.
Acknowledgment
This work was conducted in the Materials Engineering Laboratory of Michigan Technological University, and the work was funded by the Tribology Initiative of the National Science Foundation. (Contract 61724 started 8/1/00 - completed 9/4/02) You s h o u l d avoid m e n t i o n i n g n a m e s of individuals beW h e n you are giving a p r e s e n t a t i o n w i t h o u t visual aids a n d you a r e not c o m f o r t a b l e w i t h 3" x 5" cards, I r e c o m m e n d a "crib sheet" in the p o c k e t of y o u r suit o r p o s s i b l y rolled u p in y o u r hand. This single sheet of p a p e r (like the one that follows) will c o n t a i n key w o r d s that guide y o u t h r o u g h the talk.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Title:
RULE:
Effective speakers have an "aid" available if
needed.
Introduction:
Background - negative votes on ASTM test ballot Purpose - show that there is substantive abrasivity after significant use Objective - get ASTM standard approved Scope - did tests with loop abrasion machine Format- loop tests, results, discussion, conclusion
Body:
Loop tests: 1. 2. 3. L 2. 3. 1. 2. 3. describe machine SEMs of abrasive proftlometry before and after abrasion versus number of passes SEMs after use tool steel wear data Samuel's model Archard equation correlation plan
Summary
F o r m a l talks b a s e d u p o n a w r i t t e n d o c u m e n t are easy to prepare. The d o c u m e n t h e a d i n g s serve as the outline. The d a t a a n d facts c o m e from the d o c u m e n t . Visual aids can be prep a r e d from the outline, a n d I r e c o m m e n d the use of 3" 5" c a r d s to "storyboard" a talk, even if they will e n d u p being p r e p a r e d in final f o r m on a c o m p u t e r s l i d e - g e n e r a t i o n p r o gram. The c a r d s force concision; the c o m p u t e r does the opposite. You c a n i m p o r t six g r a p h s onto a single slide. I n f o r m a l talks r e q u i r e an outline, a n d the 3" 5" c a r d system can b e u s e d from the outline. All p r e s e n t a t i o n s n e e d a rigid t i m e budget, a n d each talk e l e m e n t deserves its o w n time allowance. S o m e t i m e s it is advisable to write o u t an entire talk. This is especially true for occasions w h e r e you m a y be q u o t e d in the p r e s s o r for press releases o r policy statements. S u c h a talk does n o t have to be read. It can be given b y "scan a n d talk to the audience" technique, it c a n b e m e m o r i z e d , o r if you have the facility, a t e l e p r o m p t e r can be used. Finally, always have a p r e s e n t a t i o n a i d t h a t will help y o u p r e s e n t y o u r m e s s a g e as p l a n n e d . S o m e t i m e s it is o n l y a single sheet of paper, b u t it gives y o u p r o t e c t i o n in case of a n e r v o u s m e n t a l lapse. It c a n save y o u r p r e s e n t a t i o n .
Results:
Discussion:
Closure Conclusions 1. 2.
We r e c o m m e n d that you p r a c t i c e a talk to see if y o u m e e t the t i m e b u d g e t that y o u p l a n n e d . If you use this "crib sheet" a few times for y o u r p r a c t i c e sessions, you will n o t n e e d this sheet d u r i n g y o u r p r e s e n t a t i o n , b u t it is there in y o u r p o c k e t for a s s u r a n c e if y o u s t a r t to get rattled.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
MNL54-EB/Jan. 2005
Copyright 18 by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by by ASTM International Copyright9 2005 www.astm.org Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
to work elsewhere. During the "e-com" years of the 1990s, many software companies gave key employees every perk from gourmet lunches to free Corvettes to keep them happy. Not everybody can write saleable software or draw greeting cards for which customers will pay $2.95. Staff who produce product concepts, staff with marketing brilliance, and staff with manufacturing acumen are the intellectual property of their employer. Companies with c o m m o n sense recognize this and respond accordingly.
number of times I presented and published papers on tests that I developed so that I could still use them if they were patented by others.] Many companies try to keep their ideas secret as their intellectual property defense. This can also bite you. The competition can patent a process that you have been using for many years but never divulged. You will no longer be able to use the process that you developed without paying royalties to the patent holder. [I witnessed this happen on a product line that I worked on. For years we had been using carbon fiber reinforced plastics to make X-ray cassettes, but a competitor patented the use o f carbon fibers anywhere in radiography. This is like patenting the law of gravity, but it happened. ]
RULE: Be very cautious in selecting secrecy to protect intellectual property. Our computer-dominated universe has prompted another way to protect intellectual property. You copyright a work and submit it to companies who put this work on the Internet (for a fee) to let all know that it belongs to you. This also establishes prior use in case there are patent problems. You announced to the whole world that you used this process or product. In summary, every time that you make an oral presentation, you should do so with an intellectual property strategy. Do you want to advertise the use of a process or technology or do you want to protect some intellectual property? If it is the latter, you must consider the ways that the work could be stolen and develop a defensive strategy. Computers make protecting intellectual property a significant challenge (as the music industry has found out).
work.
RULE: Never let intellectual property leave your PC without a copyright. Net meetings are very common in U.S. industry, and they also can be used to pirate your work. [In a weak moment, I also agreed to make a technical presentation to a large company over the phone. I sent them a copy of the visual aids that I used, but this time I had them copyrighted. However, after my presentation, it occurred to me that they could have taped my oral presentation (on the phone), and I would never know. There were net-meeting participants in various parts o f the country, and one participant could simply have been using a speakerphone with a recorder next to it.] There may not be a good way to protect recording net-meeting presentations without getting some sort of legal agreement signed by participants. Thus, the risk of theft of your presentation is very real, and if you have a presentation that you do not want to share with the world, you should avoid video talks, net meetings, and other forms of electronic sharing. RULE: Consider the risk o f electronic theft o f your intellectual property. There is another aspect of intellectual property besides protecting theft. Some people advocate defensive intellectual property. For example, some companies patent technologies that they are really not interested in developing just to throw off the competition. All progressive companies continually review the patents of their competitors. If they see many patents on oxide ceramics, they may deduce that you have a hot product in the works that uses this technology, but you may only be patenting these as a decoy-defensive patenting strategy. The U.S. patent laws are written such that if a company shows prior use, they can still use a patented process or product. [My former employer had a policy not to patent tests--any kind of test, but other companies patent tests. So a
[! wrote this quotation and its owner as I remembered it, but I did not see it in print in original form. I only remember it
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
TO:
FROM:
We are requesting copyright permission to reproduce (list material to be republished and source of the material) , Copy attached in (title of ASTM Publication) to be published by ASTM International (ASTM). ASTM requests permission for non-exclusive worldwide rights, in all languages, to include the following material in the publication(s) and all future editions and revisions thereof, in all formats including CD-ROM, internet, and other electronic media: A credit line to acknowledge the issue of your material will be noted. If you have preferred credit line, please indicate below. If permission is granted, please complete, sign and return this form to my attention. A copy is enclosed for your files. By signing this release, you hereby grant ASTM authority and discretion to grant permission to others to copy or reproduce the material. Thank you
Sincerely
I (we) grant permission for the use requested above. Authorized Signature: Printed Name and Title: Company: Address: Date:
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
from being published in a magazine with just the author's name for attribution. Most people consider this fair use, but it would take many hours of research to find the copyright holder.]
There are many legal issues that arise when you use copyrighted material. Essentially, most copyrights are good for 20 years after the author's death, so most work from people who lived in the last century is covered by a copyright. [I read somewhere that the copyright on the song "Happy Birthday to You" was still in effect in the year 2002, and a royalty must be paid whenever it is sung on radio or TV. I do not know that this is true, but such a scenario is quite possible.] Because of the problems that arise in using copyrighted material, it is best to avoid using it in a presentation. RULE: Avoid the use of copyrighted material.
Besides respecting copyrights, as a speaker, you need to respect the intellectual property of others, especially colleagues. In the 1990s, U.S. industry started to promote teams instead of individual work. Team meetings usually require presentations from individual team members. The ethical approach to presentations at these meetings is to never espouse the ideas of another as your own. There is no copyright law to protect your ideas in this situation. One way to try to prevent idea theft is to make a slide or overhead of your idea and to present it to the group before even discussing it with teammates. [This may seem "un-team like," but I was on a team that contained a pathological idea thief. He stole one from me, then from another teammate, then another. The team leader was clueless about technical issues and accepted that they belonged to the thief. One of the team persons quit the team because of this person, but he is probably still stealing the work of others as I write this.] RULE: Respect the intellectual property of others, and protect your own.
RULE: If you feel that use o f copyrighted material will add great value to your presentation, then u s e it with a proper citation, and get permission for its use. Figure 5-1 is an example of a permission request. It is signed in triplicate, and the copyright holder keeps a copy, the publisher keeps one, and you should keep one. The permission form is sent to the copyright holder, usually the publisher of the book or journal, not the author. In fact, if you publish a paper in a journal and want to use a graph from that paper in a talk that you are giving, you must get permission from the journal. Permission requests are normally sent to "Permissions Editor" when you do not know the appropriate person to whom it should be sent.
Summary
We conclude this discussion of intellectual property with an admonition to make it part of your presentation strategy. Decide whether you want to copyright your presentation. Make sure that your presentation is not giving away valuable organization secrets. Make sure that your presentation does not penalize your organization in any way. In fact, all presentations should have a positive effect on you and your organization. If one does not, you may want to reconsider making the presentation. Finally, respect the ideas and work of others in your presentations. Stealing from others eventually involves retribution. Make respect of the intellectual property of others a fundamental element of your presentation and part of your personal ethics.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
MNL54-EB/Jan. 2005
C o m p u t e r - g e n e r a t e d w o r d slides c a n have bullet statem e n t s fade in as you cover points. This is a c c e p t a b l e since the slide is always fully visible as you a d d bullet statements. This is very effective since the a u d i e n c e r e a d s at the s a m e pace as the speech w i t h o u t the a n n o y a n c e of the d a r k r o o m c r e a t e d b y p a r t i a l covering of the p r o j e c t e d image. A n o t h e r w a y that a visual a i d c a n have a negative effect o n y o u r p r e s e n t a t i o n is to use a visual aid that c o n t a i n s a n e r r o r that will be p i c k e d up by s o m e o r m o s t of the audience.
[I shall never forget my first project proposal as a green engineer to the plant general manager and her staff. My title slide read "Develope a new casting process for Corvair Throttle Bodies." I went through my talk as planned, but afterwards my boss told me that the general manager wanted me to have my material proofread in the future. She probably never heard my proposal. All that she remembered is that I did not k n o w how to spell "develop." My boss made a "first big presentation" excuse to the general manager, and I got my funding, by my reputation was undoubtedly besmirched. ]
RULE: P r o o f r e a d v i s u a l a i d s to b e a b s o l u t e l y s u r e t h a t t h e y are error-free.
It is likely that all of us have b e e n in the a u d i e n c e of a p r e s e n t a t i o n w h e r e the s p e a k e r uses a t r a n s p a r e n c y of a full p a g e o f p r i n t e d text as a "visual aid." The a u d i e n c e r e s p o n s e is usually negative, a n d w h a t e v e r the m e s s a g e the s p e a k e r h a d dissipates to the a m b i e n t a t m o s p h e r e . The a u d i e n c e is offended. The s p e a k e r d i d not c a r e enough a b o u t his o r h e r a u d i e n c e to take the time to a b s t r a c t the i n f o r m a t i o n o n the p a g e of text into bullet s t a t e m e n t s that could be seen a n d r e a d by the audience. The o n l y thing w o r s e is to use a full page o f text, cover all b u t a line, a n d p r o c e e d to l o w e r the cover while r e a d i n g the text. This s p e a k e r is saying that the a u d i e n c e is c o m p r i s e d of unintelligent p e o p l e w h o c a n n o t c o m p r e h e n d a fully visible slide.
S o m e t i m e s y o u s i m p l y do not need visual aids. Here a r e s o m e of those situations: 1. Your talk is at a site w i t h no facilities (an o p e n a r e a r e s t a u r a n t , etc.). 2. It is n o t the a c c e p t e d w a y to p r e s e n t to this type of audience (a candidate's "few words" at a political rally, a w a r d ceremony, c o m m e n c e m e n t speech, etc.). 3. Your m e s s a g e contains no facts o r d a t a for the a u d i e n c e to r e t a i n (you a r e i n t e r p r e t i n g a novel to a l i t e r a t u r e class, m a s t e r of c e r e m o n i e s at a gala).
Copyright 22 by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by by ASTM International Copyright9 2005 www.astm.org Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Visual aids may distract from your message (motivational speech, sermon, etc.). There are many other situations where visual aids are not needed, but basically, there are presentation situations where they simply do not add value.
4.
Types o f V i s u a l A i d s The original visual aid was probably a stick in the hand of a Neanderthal tribal leader. He drew images in the sand to propose a hunting plan. Some speakers use body language as visual aids, some use hand gestures, some pound the podium, and some do things to free-standing microphones. Motivational speakers pace back and forth on the stage and point their finger at the audience. All of these are done to enhance audience absorption of the speaker's message. Theatrics do not usually work well in technical presentations. The spectrum of visuals that can be used to support a thesis can be broken into four basic categories. Each has advantages and disadvantages.
Categories of Visual Aids Text Photo Line Art Table Skit
If you cannot decide whether they add value, rehearse the talk with a trusted person or work group and get his or her opinion. [Many times I would "dry-run" a formal paper for an international conference with my work group. Invariably, they would find some visual aids helpful, others not, and I could alter the presentation accordingly.]
Demo Demonstration
Experiment
Word slides
Digital Flip charts Slide Blackboard Video Mathematics Movie Formulae VCR
Schematic Word Circuit Number Organization Code Line graph Histogram Pie chart Bar graph
Finally, most technical presentations almost always are enhanced by the use of visual aids. [I have probably attended thousands of technical talks in my many years in the business, and I cannot recall a single speaker who did not use visual aids to present his or her thesis--except me. One time I was the first speaker for the morning at a large international technical conference. I had about fifty slides for my talk, and I checked to see that the projector worked properly at 7:50 AM for my 8:00 AM presentation. I was on my third slide when the projector started to smoke, and the projectionist asked me to stop while he hooked up the spare projector I proceeded to slide number six, and that projector failed. The projectionist said that he would go to the audiovisual office at the hotel to get yet another I stood in front of several hundred people for what seemed like an eternity. After five minutes, I stated that I had better proceed without slides or the talk schedule for the day will be messed up. I ended up drawing trend slides in the air with my fingers and describing complicated test results in words. Fortunately, I rehearsed this talk enough that I could remember all the parts and the conclusions. The audience was very understanding and gave me a big applause when I finished, but this experience really demonstrated to me the need for visual aids in a technical presentation. ]
Visual Aid
Text Photos
Disadvantages
Can be uninteresting
Line art
Tables
Demos
Audience remembers
them
Posters
Posters are very commonly used in technical conferences, department tours, and many other types of technical gatherings. I did not make "posters" a category since invariably they are "boards" containing elements from the categories that I have listed. They usually contain text, graphs, photos, formulae, and tables. The advantage of a poster is that the author does not have to make a formal presentation to an audience. A big disadvantage is that the author may have to present an informal talk on the work twenty times (if the posters are "manned"). [I personally avoid the use o f posters, since it is very difficult to make one that can stand alone (does not need you to interpret it for the viewer), and the work is not archived. It can be lost forever since posters are not published. ] Posters are most appropriate where they serve to replace an
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
oral p r e s e n t a t i o n . A w e l l - p r e p a r e d p o s t e r next to a piece o f l a b o r a t o r y e q u i p m e n t can a n s w e r questions o n w h a t the ins t r u m e n t does a n d w h y this is of value to the organization. S u c h visual aids are extremely useful w h e n taking groups on a t o u r of a facility.
visual aids for a talk. I only have to draw them a bit neater and make transparencies or scan them into a computer.] Overall, line art is p r o b a b l y the m o s t helpful visual a i d tool for explaining test p r o c e d u r e s (schematics) a n d test results (graphs).
Text
The use of w o r d slides, text, as visual aids needs no explanation. The E g y p t i a n m o n u m e n t b u i l d e r s u s e d text in stone to tell all w h o viewed the m o n u m e n t s w h a t they were for a n d w h a t was h a p p e n i n g w h e n they were built. Most of us old p e o p l e grew u p with c h a l k b o a r d s as the visual aid of choice used by o u r teachers. Electronic "chalkboards" a n d w h i t e b o a r d s w i t h felt t i p p e d p e n s are r e p l a c i n g c h a l k b o a r d s in new teaching facilities. Teachers do n o t like the m e s s of chalk.
Tables
Tables a r e i n h e r e n t l y b o r i n g a n d u n i n t e r e s t i n g to m o s t audiences. I p e r s o n a l l y try to avoid t h e m at all costs. I c o n s i d e r t h e m to be a last resort. If you c a n n o t find a n o t h e r w a y to p r e s e n t information, then use a table. The available real estate o n a slide m a k e s t h e m difficult to use unless y o u r table only c o n t a i n s a few items.
Average Rainfall
Photos
Photos are usually the best visual aids for describing a complex object. They really are w o r t h a t h o u s a n d words. The e n o r m i t y of the W o r l d Trade Center disaster was fixed in the m i n d s of m o s t o f the world's p o p u l a t i o n b y the p h o t o s a n d movies o f the p l a n e s hitting the towers. People will never forget those photos. Your talk m a y n o t c o n t a i n a m e m o r a b l e dialogue, b u t if you s h o w the a u d i e n c e a m e m o r a b l e photo, y o u r a u d i e n c e will r e m e m b e r it a n d at least s o m e o f y o u r message. C o m p u t e r - c o n t r o l l e d video p r o j e c t o r s allow a s p e a k e r to easily interject a t w o - m i n u t e movie into a slide talk. These s h o r t movies are extremely effective in showing m o t i o n of i n t e r r e l a t e d parts, showing assembly, showing failu r e m o d e s , etc. They are great!
An a u d i e n c e can quickly i n t e r p r e t this table to s h o w that this has b e e n a d r y summer, b u t line a r t in the form of a b a r g r a p h w o u l d p r o b a b l y be a lot m o r e convincing a n d easier for the a u d i e n c e to grasp.
RULE: Consider photos and videos to clarify complex processes and objects.
Demos
My "demos" category includes a n y a n i m a t i o n s by the s p e a k e r to explain a concept o r message. A teacher p e r f o r m i n g sap o n i f i c a t i o n in front of his o r h e r class is a "demo" o r d e m onstration. A s p e a k e r m a y p e r f o r m a skit to convey a message. This is also a demo. Passing s a m p l e s to the a u d i e n c e is a n o t h e r d e m o technique, however, it is one of the riskiest. Frequently, the s p e a k e r loses the a u d i e n c e as well as the s a m p l e s that he o r she p a s s e d a r o u n d . Passing a r o u n d one "sample" m a y work, b u t p a s s i n g three o r f o u r s a m p l e s to a n a u d i e n c e of 30 to 100 can create a mess. W h e n a p e r s o n is looking at a sample, he o r she is n o t listening to the speaker. Concurrently, the "passing about" distracts m u c h of the audience a n d they stop listening to the message.
Line Art
Line a r t is an i m a g e that is g e n e r a t e d with lines. Drawing w i t h a pen, pencil, o r c o m p u t e r p r o g r a m creates line art. W h a t c a n be d r a w n ? Just a b o u t anything, b u t in technical p r e s e n t a t i o n s line art is a l m o s t m a n d a t o r y . G r a p h s are n e e d e d to show trends, pie c h a r t s are u s e d to illustrate relative p a r t s of a whole, a n d h i s t o g r a m s a n d o t h e r statistics aids are often m a n i f e s t e d by line art. Line a r t can be created by hand, using a n artist, o r using c o m p u t e r software. C o m p u t e r - g e n e r a t e d line a r t can be eleg a n t a n d detailed, o r it c a n be so c r u d e that it m i g h t be left out. M a n y technical p a p e r s c o n t a i n test e q u i p m e n t schem a t i c s m a d e using the relatively r u d i m e n t a r y d r a w i n g capabilities o n "standard" w o r k p l a c e software. Often, they c o m e o u t so c r u d e that the a u d i e n c e c a n n o t figure o u t h o w the device works.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
only problem was that someone in the audience blocked the laser light source with a 3 ~ x 5" card, and the computer continued to emit particle velocity and flux data. The salesperson could not explain how the PC could continue to put out velocity and mass flow rate data when the laser was essentially shut down. This demo cost a sale. We probably would have bought this equipment if it were not demonstrated.]
RULE: D e m o s are r i s k y - - u s e t h e m w i t h due caution.
son "What do you expect to learn from this talk?" If the reply is different from your intended message, you need another iteration. If you are using a chalk or white board or flip charts as visual aids, I r e c o m m e n d enough text in visual aids to at least outline your presentation:
Text slide presentation Review accepted protocols Slides that support your message 1. Word limits 2. Font type and size 3. Background 4. Additional guidelines
This outline could be penned on a whiteboard in about a minute, and it could serve as the only visual aid for your talk. This sort of text visual aid is normally the m i n i m u m that you should present to your audience. On the other end of the scale, a formal talk on text slide preparation will have word slides announcing each of the four elements of the body, as well as text slides guiding the audience through each.
course in PowerPoint| I on slide making, and the person who was teaching the course was fascinated with the "technical" capabilities of the software, the colors, the shading, the fadein and fade-out capability, animation, etc. The teacher's recommendations for making slides were dead wrong in my opinion. She promoted the bells and whistles that only serve to distract the audience. She had the audience marveling at the slide and ignoring the message in the slide. In my opinion, she was promoting misguided visual aids.]
RULE: Design visual aides in a way that d o e s not distract the audience from the message.
This section will discuss the most important visual aids and present my recommendations on how to prepare them so they w o r k - - t h e y support your thesis and reinforce your message.
RULE: Use text visual aides to guide your audience through your presentation.
Now let us use the preceding format to discuss the other i m p o r t a n t aspects of text visual aids: Word Limits--We already made the point (probably to excess) that the worst thing that a speaker can do to wreck a presentation is to project a full page of 12-point typed text. So what is the m a x i m u m n u m b e r of words allowed on a visual aid? The answer is: the n u m b e r and size that is needed to make a point and be readable by every person in the audience. [When I used to attend weekly team meetings, I would
make quick overhead visual aids by taking my 12-point typed report and copier-enlarge them so that, for example, my three conclusion sentences would fill they projection screen.] Thus,
it depends on the size of the room, b u t the purpose of a visual aid is not to let the audience read a report in text snippets. You must abstract every thought or point and express the substance in a few words in the visual aid.
Text
All presentations should contain some visual aids on what you are going to talk about. Sometimes, that visual aid is only the title of your talk. The title is the abstract of your talk, and it announces what you are going to say and tells the audience why they should attend. Thus, the title that you choose for a presentation is of great importance.
RULE:
D e s i g n t e x t v i s u a l a i d s to be readable by all in the audience. A visual aid on word limits for text slides may be as simple as the rule just presented. F o r those who want hard numbers, the professionals r e c o m m e n d only about eight lines with no more than ten words per line. You can do more words per line if the audience is ten people in a 20-foot square conference room with a 6-foot square projection screen. However, the limit on lines or bullets remains. Try not to exceed this. Needless to say, you will not be arrested by U.S. government visual aid
RULE: Titles must be concise but still accurately reflect your message.
I r e c o m m e n d spending considerable thought on your title and then having it reviewed by others. Ask a trusted per-
police if you exceed these guidelines, b u t they s h o u l d serve as a goal. The final p o i n t that I w a n t to m a k e c o n c e r n i n g text slides is the p r o p e r w a y to m a k e w o r d slides c o n t a i n i n g form u l a s a n d m a t h e m a t i c s . Very simply, a f o r m u l a visual a i d is n o t a n a i d if all s y m b o l s in the f o r m u l a are n o t defined o n the s a m e slide as the formula. W= Where: W K L D H = = = = = v o l u m e w e a r of a sliding couple (m 3) unitless w e a r coefficient n o r m a l force on the sliding a s s e m b l y (N) total sliding distance (m) a b s o l u t e h a r d n e s s (MPa) KDL 3H
Of course, it is n o t n e c e s s a r y to tell the a u d i e n c e in a talk on p o l y m e r s that the s y m b o l "C" stands for c a r b o n a n d "H" s t a n d s for h y d r o g e n d a l l m e m b e r s of the a u d i e n c e will be f a m i l i a r with p o l y m e r structures, b u t you n e e d to identify the n o n - s t a n d a r d s y m b o l s a n d a c r o n y m s :
used in newspapers, journals, a n d legal d o c u m e n t s . S o m e of the a c c e p t a b l e fonts are: 9 Times New R o m a n 9 Geneva 9 Helvetica Occasionally, italics a r e a p p r o p r i a t e , but you m u s t have a r e a s o n for using them. Script fonts a r e extremely difficult to read, as are the decorative fonts, such as Old English, w h i c h are i n t e n d e d for w e d d i n g invitations a n d s i m i l a r applications. F o n t size is o f u t m o s t i m p o r t a n c e in p u t t i n g text o n visual aids. H a n d lettering of o v e r h e a d slides w i t h a n overh e a d - m a r k i n g p e n a u t o m a t i c a l l y creates a n a p p r o p r i a t e font size. The p e n s p r o d u c e a line w i d t h in excess of one millimeter, a n d for letters to b e r e a d a b l e , they m u s t be a b o u t 8 m m high. Thus, the size of the m a r k i n g p e n tip forces a font size a n d a w o r d limit w h e n you m a k e a visual aid. In fact, if you w a n t to be safe in p r e p a r i n g text visual aids, m a k e overheads with a n o v e r h e a d marker. [I frequently used hand-
printed text slides for informal presentations, and I took flack from some co-workers for using my "down-home" overheads, but they never[ailed to get my message across, and I only spent minutes making them. I f I did not have to include graphs or schematics, I would make text overheads on a word processing program using a m i n i m u m of 30-point font size. They also work fine, and it is less time consuming (by a factor of 10) than using slide-making software.]
RULE: H a n d - d r a w n o v e r h e a d s o r s l i d e s are p e r f e c t l y a c c e p t a b l e if t h e y a r e n o t s l o p p y o r w r i t t e n i n s c r i p t . Print neatly. The o p t i m u m font size for text o n visual aids d e p e n d s o n the size of the audience. You m u s t p i c k a size that c a n be r e a d b y all. This m e a n s testing a size at the d i s t a n c e that y o u expect in a n audience. If y o u are giving a talk w i t h i n y o u r organization, y o u k n o w the a p p r o x i m a t e size of conference rooms. So, use a font size that is r e a d a b l e at 30 feet, a n d this will a c c o m m o d a t e 99% of all conference rooms. If you a r e giving a talk to 3,000 p e o p l e in a n a u d i t o r i u m , the font m u s t be visible at 300 feet. [I hope that the CEO of my
n * = metal ion
Fonts
In the "old days" in c o r p o r a t e America, big c o m p a n i e s w o u l d have a n a u d i o / v i s u a l (AV) d e p a r t m e n t that w o u l d m a k e visual aids for e m p l o y e e s w h o n e e d e d s o m e for a p r e s e n t a t i o n , internal o r public. They knew that letters h a d to look a certain w a y a n d be of sufficient size in o r d e r for a n a u d i e n c e to be able to r e a d them. Most AV d e p a r t m e n t s have gone the w a y o f the o n e - h o u r p a i d l u n c h - - t h e r e are n o t m a n y inh o u s e AV experts to provide g u i d a n c e on selecting fonts for text o n visual aids. We n o w have to p r e p a r e o u r o w n p r e s e n t a t i o n visual aids. C o m p o u n d i n g the p r o b l e m , the PCs that we all have to m a k e visual aids have t o o m a n y font types a n d sizes available, a n d it is too easy to c h a n g e them. All p e o p l e are different, so each will p r o b a b l y have a different o p i n i o n o n w h a t font type they like the best. However, m a n y of the fonts offered o n PCs a r e essentially u n r e a d a b l e w h e n used as visual aids. [Last year I received a notice for a 40-year class
reunion. The font on the notice was some type of old Sanskrit or medieval lettering, and the notice was very difficult to even decipher. It may have been a joke, but I was so annoyed by the notice that I did not attend. An inappropriate font can have negative effects beyond readability. ]
RULE: Visual a i d s w i t h s t r a n g e f o n t s c a n h a v e n e g a t i v e e f f e c t s o n an a u d i e n c e . Avoid t h e m . So w h a t type of font should be u s e d for visual aids conraining text? The only fonts that are a c c e p t a b l e are those
last employer reads this guide. He used to call one or two "town meetings" a year to talk to us factory floor workers in the 3,000-seat auditorium. Invariably, what he was showing on a video projector or on an overhead could only be seen by the people within 40 feet or so of the screen. Of course, all of these up-front seats were filled with low-level bosses seeking higher levels of bossdom. I used to sit 200 or 250 feet back, so I worked on reports when he discussed the visual aids that I could not see. ]
RULE: U s e a f o n t s i z e t h a t w i l l b e r e a d a b l e to all in t h e audience. W h e n I p r e p a r e visual aids for p a p e r s at large conferences, I p l a n for a w o r s t case s c e n a r i o a n d try n o t to use fonts less t h a n 30 p o i n t s for anything. [Normally, the papers
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
room that seats about 60 people. This is what I have come to expect. One time, I had a paper accepted at an overseas conference; I assumed that I would be giving my talk in a 50person room, which is typical. I prepared overheads for a 30 to 50-person conference room. Well, they had those kinds of rooms, but my session was held in a 3,000-seat auditorium complete with stage. The projection screen was so large that all of my overheads were readable, but severely truncated. They did not look pretty.]
RULE: P r e p a r e v i s u a l a i d s for " w o r s t case" w h e n p r e s e n t i n g t a l k s in u n f a m i l i a r facilities. I n summary, use s t a n d a r d fonts a n d a font size t h a t will be a u d i e n c e r e a d a b l e w h e r e v e r you give y o u r talk.
a n d c a n overload y o u r system. In fact, the h i g h e r the i m a g e resolution, the m o r e m e m o r y it takes. If this is a factor, you m a y w a n t to forget the 3MB r e c o m m e n d a t i o n a n d use the lower r e s o l u t i o n i m a g e s to save memory. An o r d i n a r y p h o t o uses a b o u t 600 kilobytes of memory. [I gave a presentation using a significant number of photos, and the only way that the talk could be forced into my laptop was to put it on CD and use part of the computer memory that was supposed to be reserved for servicing the system.] A o n e - h o u r c o m p u t e r slide talk with p h o t o s can s o m e t i m e s o v e r w h e l m the ordin a r y c o m p u t e r system. RULE: B e s u r e that y o u r c o m p u t e r h a s sufficient m e m o r y to handle photos combined with other slides. VCRs--Video cassette recorders, a n d m o r e increasingly DVD players, a r e as c o m m o n as m i c r o w a v e ovens in the U.S., a n d they can be u s e d to r e c o r d a visual a i d for a talk. Most times, they fail if they are not professionally p r e p a r e d . A m a t e u r s move the c a m e r a jerkily. They do n o t dwell long e n o u g h on key c o m p o n e n t s / s u b j e c t s , a n d the n a r r a t i o n is halting a n d n o t well p r e p a r e d in wording. [One of my coworkers made a proposal fbr funding by self-recording and narrating the use of a sophisticated measuring device that he developed. He held the camera and talked as he operated the device. It came out as very well intentioned, but hilarious, to most of us in the audience. He ran into glitches in getting the machine operating and, of course, the image wandered erratically as he flipped switches and adjusted dials while talking and holding the camera. He got his funding, but mostly because of his sincerity rather than his video visual aid.] RULE: P r e p a r a t i o n o f v i d e o s is b e s t left t o p r o f e s s i o n a l s . A s e c o n d risk in using videos is a u d i e n c e a n n o y a n c e w h e n you fidget with the VCR e q u i p m e n t . All o f us have p r o b a b l y w i t n e s s e d a fifteen-minute f u m b l e session while the s p e a k e r gets the TV a n d VCR w o r k i n g t o g e t h e r o r s o m e t i m e s the s p e a k e r r e w i n d s to find a p a r t of a video that he o r she w a n t s to show. If you a r e going to use a video o n a VCR as a visual aid, you m u s t test it a h e a d to m a k e sure it can simply be switched on a n d off like a light switch a n d it will work. F u m b l i n g w i t h e q u i p m e n t will r u i n y o u r p r e s e n t a t i o n . [I personally avoid their use unless they are professionally prepared and are an adjunct to teaching a subject. I have never made a video, and in all my years in the business, I have only seen fewer than five videos well done by amateurs. ] RULE: If y o u are g o i n g to u s e a v i d e o f o r a v i s u a l aide, m a k e s u r e it is n o t "jerky," that it w i l l w o r k w i t h o u t f u m b l i n g , a n d t h a t all in t h e a u d i e n c e c a n s e e it.
Photos
Hopefully, I have m a d e m y case for the value of p h o t o s a n d r e l a t e d visual aids. N o w I will a d d r e s s h o w to p r e p a r e them. Conventional F i l m - - O f course, c o n v e n t i o n a l movies c a n be u s e d as a visual a i d in a t e c h n i c a l p r e s e n t a t i o n , b u t their use has a l m o s t d i s a p p e a r e d [in my experience], p r o b a b l y because of the p a r a p h e r n a l i a n e e d e d to p r o j e c t a movie to a n audience. Conventional p h o t o g r a p h s m a k e g r e a t visual aids, a n d they can be m a d e as slides that c a n be p r o j e c t e d as is, o r slides can be m a d e from prints, o r o v e r h e a d s can be m a d e from prints o n a copier. It is also p o s s i b l e to scan prints a n d convert t h e m to o v e r h e a d t r a n s p a r e n c i e s o r c o m p u t e r slides. My only r e c o m m e n d a t i o n is to m a k e sure that they a d d value to the p r e s e n t a t i o n a n d that they a r e good e n o u g h to be seen a n d u n d e r s t o o d b y everyone in the audience. A t o o - d a r k p r i n t o r too-small p r i n t will n o t help y o u r cause. Digital P h o t o s - - D i g i t a l c a m e r a s allow the c r e a t i o n of p h o t o visual aids w i t h o u t the p r o c e s s i n g steps n e e d e d for c o n v e n t i o n a l silver halide film images. The risk in u s i n g digital i m a g e s is that you m a y not have sufficient r e s o l u t i o n with y o u r c a m e r a to create a p r o j e c t i o n - w o r t h y visual aid. I r e c o m m e n d 3 3 megapixels for a m i n i m u m i m a g e c a p t u r e c a p a b i l i t y for m o s t p r o j e c t e d images. [So far my 2.3 x 2.3 megapixel seems borderline; that is why I am recommending 3 minimum. Silver halide can be the equivalent of about 25 x 25 megapixels--so film researchers tell me.] S o m e PC software allows g e n e r a t i o n of movies from sequential digital images. These a r e w o n d e r f u l visual aids for d e m o n s t r a t i n g h o w objects m o v e with r e s p e c t to each other, o r h o w they change w h e n stressed. I heartily r e c o m m e n d their use w h e n they a d d value. The risk in their use is that s o m e t i m e s they o v e r w h e l m y o u r message. All that the audience r e m e m b e r s is y o u r movie. That is fine if y o u r m o v i e is y o u r message. If it is a b o u t a test device o r s o m e ancillary a s p e c t of y o u r message, you m a y n o t achieve y o u r presentation objective. RULE: U s e m o v i e s j u d i c i o u s l y ; t h e y c a n d i s t r a c t if t h e y are not core to your message. A n o t h e r significant c o n c e r n w i t h the use of digital p h o tos is that they typically take u p lots of c o m p u t e r memory,
Graphs
G r a p h s are usually the m o s t effective m e a n s of convincing a n a u d i e n c e of a t r e n d o r c o r r e l a t i o n of variables. They a r e
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
as m u c h a part of engineering and the sciences as mathematics. They essentially are a visual display of a mathematical relationship / concept / formula. Graphs can be made into visual aids by hand drawing, by computer drawing software, by special graphing software, or by the general "business" software that is "standard" on most PCs. All graphs require essential elements and should be prepared to accepted guidelines. 1. The axes must be clearly identified. 2. The axes must have appropriate graduations or tick marks. 3. The units of what is plotted on various axes must be clearly shown as well as any magnification factors. 4. The graph must have a caption that tells the viewer what the graph is intended to show. 5. The line width must be sufficient for readability. 6. The graph must be enclosed with a line. 7. The graph should be uncluttered. 8. The graph must clarify rather than confuse. 9. The data points should show statistics if used for scientific purposes. 10. A key is required to identify multiple variables. 11. The background must enhance readability. The following are the top five "problems" that occur when graphs are used in technical presentations: 1. Too small to read 2. Too cluttered (too m a n y things plotted) 3. Too complex 4. No caption 5. Axes not well identified or improperly labeled Computer-generated slide shows make it easy to import a graph into a slide that has very little available real estate. In fact, it is so easy that some people put in several graphs. [At a recent conference that I attended, one speaker had a text title and footer as well as six graphs on the same slide. Needless to say, this slide was only for the speaker's viewing.] In almost all cases, putting multiple graphs in one visual aid is too much from the aspect of readability and understandability.
Many AV professionals advocate dark blue for slide backgrounds. I believe dark blue backgrounds to be inappropriate for any visual aid. Besides making it hard to see what is written on a slide, the dark background makes the room dark so that the audience cannot see the speaker and is inclined to nap. There may be instances where a dark background enhances a visual aid, but they probably are only known to those who advocate dark blue backgrounds. [When I worked at large companies that had AV specialists on staff, I used to have to fight them to prevent the dark blue backgrounds. I have given 35-ram slide talks using such slides that were professionally prepared, and I felt like I was talking in a darkened closet. I could not see the audience and vice versa. I could not tell if my message was coming across or if they were all s o u n d asleep.] Graphs are intended to simplify lots of data into trends that can lead to conclusions and solving of problems. Often, speakers will graph complex relationships such as: X axis = Beta factor (YS 2 - YS.E~ \x~ ']
Y axis = log
YS comp. E
Most of us mortals can understand single variables on various axes, but when an axis content is identified as a formula, it is very difficult for the ordinary audience to visualize what will happen when, for example, (E) in the preceding formulas change. Such graphs usually only perplex your audience, and they turn off your message.
I0
20
100
RULE: Use a very light background (white, light yellow, powder blue) for all graphs and line art visual aids.
The dependent variable, erosion, is plotted on the vertical axis. Erosion rate (ma/s) Some graphing software places the axis labels in strange
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
places. The vertical axis should have vertical text parallel to the vertical axis, and the horizontal axis or axes should have horizontal text below the axis numbering. Figure 6-1 illustrates the proper way to format a simple XY graph. More complex graphs still need this type of formatting.
RULE: Graphs should only use a traditional format.
use but caution that they be prepared with care. Often speakers use acronyms to label columns, and this can confuse the audience. This same thing is true for bar charts. Computer software often cannot deal with labeling vertical data. This problem can be dealt with by assigning a code to a column and using a key to explain the code.
X X X X X X X X X
Sometimes it is appropriate to just show data points on a graph; most times it is appropriate to use a line to join data points. For scientific work it is most appropriate to join data points with a line, and the data points should be means with error bars reflecting the statistics applied to the means. [I recommend error bars coinciding with plus and minus two times the standard deviation. This means that more than 98 % of the data falls within this range. This system is used on bar graphs to test for significant differences.] Other forms of line art that need consideration in preparation are complex graphs, histograms, pie charts, bar graphs, 3-D flow charts, process charts, and schematics. I recommend judicious use of complex graphs, such as 3-D spider graphs, unless they pass the person on the street test. Show your graph to a person who may typify your audience, and see if he or she understands the graph and feels that it helps to understand your thesis. If it passes, it may be okay to use, but there is still risk that it may not help your message. If you use complex graphs, what I said about labeling axes and captions is doubly important. Histograms are very useful for pinpointing issues, trends, important problems, and the like. I recommend their
Bar diameter, m m
x_
a
x
b
x
c
x
d
Horizontal lettering is preferred for columns because this is the natural form in English:
25
I
50
T
75
,
100
i
4340 50
X X
8740 40
0
X Bolt failures
30
This is the way that columns should be labeled if there is room and, of course, a proper caption is also needed: Causes of assembly rejections on August 28, 2002.
20
1040
I 1
i 2
I 3
I 4
Computers like to make pie charts, and most do an adequate job, with similar problems with identifying pieces of the pie and captioning. I recommend manual editing if the computer cannot do a proper job.
RULE: U s e m a n u a l e d i t i n g o f c o m p u t e r g e n e r a t e d g r a p h s if t h e s o f t w a r e d o e s n o t a l l o w a p r o p e r v i s u a l aid.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Circuit diagrams, finite element models, and CAD drawings often make effective visual aids, but you still need to edit them to get rid of acronyms, too small lettering, and colors that may not be seen by some of the audience. Another caution is to make sure that they are not too large to put on the real estate available on a slide or overhead. Many times, speakers use organization charts to show where responsibility lies. If the organization chart contains more than three rows, chances are they are too busy for one visual aid. Flow diagrams and process charts are another area where "too much" is a problem. A process to manufacture a drill bit may have twenty steps, so the speaker makes a box for each and shows the flow between boxes. Twenty is too much. These kinds of information require editing so that visual aids can be seen by all in the audience.
This table explains these metals to metallurgists and it is an aid. If the audience is not composed of metallurgists, it may be presented in a different way.
Test Material
Havalloy Iridum Bartim Mochar
Description
A ferritic stainless steel A ferritic stainless steel with increased chromium A martensitic stainless steel in the annealed condition A nitrogen-strengthened austenitic stainless steel
RULE:
Visual aids c o n t a i n i n g "too m u c h " a r e n o t effective; edit t h e m until all o f t h e a u d i e n c e c a n s e e t h e m a n d immediately grasp them.
The point is that tables, if they are used, should be designed to simplify your message to the audience.
RULE:
In summary, line art visual aids are usually the "gold standard" of visual aids if they are properly prepared. Nothing is more convincing than graphical data; few things are more effective than a well-drawn schematic in explaining how something works, and flow charts really help show what is going on. Line art visual aids will "help" most presentations, but they must be done right; they must be simple, well labeled, captioned, and done in a size that is readable to all.
Design t a b l e s t o m a k e y o u r p o i n t o b v i o u s at a glance. Another important point regarding tables is that they need proper captions. Computer programs decide on the font, size, and location of the table "title." Tables do not normally need a title. A caption does the job better:
Tables
Tables can be made from numbers or words and combinations of words, numbers, symbols, and punctuation marks as in listing the code for computer programs. Tables make poor visual aids if the audience has to interpret the data to "discover" the point of the table. Visual aids are supposed to be that. If they add interpretation work for the audience, they are not aids; they often become a distraction. The audience is trying to scan the table to ascertain what the data mean, and they almost invariably stop listening to what you are saying. A graph is the proper way to interpret numerical data from a table. There is no other way to present some type of information. If, for example, you were giving a talk on a study conducted on four metals, the audience will want to know the differences between the test materials. You must present a table with the appropriate description.
Test Material
Havalloy Iridum Bartim Mochar
Description
A ferritic stainless steel A ferritic stainless steel with increased chromium A martensitic stainless steel in the annealed condition A nitrogen-strengthened austenitic stainless steel
Fe
85 80 77 75
Cr
14 19 12 22
Ni
Mo
Others min.
0.5Cu
In summary, tables are an essential part of visual aids, but they need to be carefully designed so that they do not distract the audience from your message.
Demos
We already mentioned some of the problems that exist when using demonstrations in a presentation. Preparation of a demo that produces the desired result should involve thoughtful design and significant rehearsal. A demonstration of a science-type principle will fail if the demo is too com-
0.8 5 1
3 1.5
2.1Cu 0.4N
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
plicated. The audience could get lost. Similarly, if it requires a lot of equipment, Murphy's Law dictates that one or more pieces may not work as intended. Safety can be a concern for some experiments. [I almost always used a demo of the formation of isocyanurate foam from liquid chemicals when I spoke to young people about materials engineering. I would bring two small vials of clear liquid (about 20 ml each) and mix them for about thirty seconds in a large "popcorn" conminer Within about two minutes, I would have about a cubic foot of rigid foam .spilling out of the popcorn conlainer. The students would be amazed; the demo never/'ailed because it only required two little vials that could be carried in my pocket and an empty popcorn container After doing this demo for about five years, I learned that the chemicals that I was mixing together are carcinogenic, and their use now requires a full respirator. There was a safety hazard (to me and the audience) that I was not aware of]
This was done by putting all of the visual aids that were professionally drawn or photographed from the 3" 5" file cards used in preparing the talk. We would lay out all of the slides on the light box and start to put them into rows coinciding with the basic parts of the talk: Introduction, Body (procedure, results, discussion), and Closure (conclusions, recommendations). We would review the slides that were part of the introduction and make sure all were needed and detelnnine if they adequately introduced the work. If something was not right, someone would add or delete slides to solve the problem. This procedure was repeated for each part of the talk. When everything appeared to be needed and in the right order, the slides were numbered in the top right corner and collected in order, just as they would be put into the projector slide tray.
RULE: D e m o s require design, rehearsal, and review before they are i n c l u d e d in a presentation.
In summary, I do not recommend the use of demonstrations, passing samples, skits, and these types of visual aids unless they are thoughtfully designed and tested. A demo that does not work can have very negative results. A demo that puts you or the audience at risk is also not a good idea.
Summary
This chapter may be the most important of all chapters in this guide since most talks use visual aids. Almost all PCs come equipped with slide-making software, and it is an easy matter to make slides. Sometimes they really are not needed. They do not add value; they do not help the audience understand your message. When visual aids are deemed absolutely necessary, they should be prepared using the guidelines presented (Figure 6-2), and they should be incorporated into the talk by storyboarding the talk. If all of these steps are carefully exercised, the end product should be a talk that effectively delivers your intended message.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Preferred
5,555555,5S5555,5,55
. . . . . . . . . . . . . . . . .
|. . . . . . . . . . . . . . . .
9 Minimize background clutter 9 Landscape 9 High contrast letters 9 Maximize usable space 9 Standard fonts 9 45 point centered 9 Upper & lowercase 9 Bold
5SS55,~55&f555S5
Title
This is my talk
&~555S5S5S555
Section Heading
PROCEDURE~I~
Procedure
5555555s55SS5.~$5
SCOPE
Subheads
Scope
$5555,5555555S55s
FORMAT
Format
1. 2. 3. 4.
Text
9 No more than 5 lines 9 Upper & lowercase 9 Headers bold 9 Italics only for special words 9 One per slide 9 Keep variables simple 9 20 point min. on labels 9 Upper & lowercase 9 Include caption
5555555555555555
Graphs
555&55555555S555
Photos/ Videos
I IIJ
SSSS, SSSSSSSSSSS,5
Tables
illlli
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
MNL54-EB/Jan. 2005
Adequate seating?
Speaking Facilities
M a k i n g a n oral p r e s e n t a t i o n in a n y t h i n g b u t a o n e - o n - o n e situation requires c o n s i d e r a t i o n of the facilities available for y o u r p r e s e n t a t i o n . [Many times I would present "tutorials" on technical subjects to as f e w as one technician. I w o u l d make these presentations in a conference room with an overhead projector, chalkboard, flip chart, and a door that closes. The former gave me the tools to teach; the latter prevented interruptions that could ruin the presentation. You owe it to the audience, even an audience off one, to not waste their time. You need to produce the intended result, and having appropriate facilities makes results more likely.] I n f o r m a l p r e s e n t a tions to teams also r e q u i r e t h a t you l e a r n w h a t facilities a r e available w h e r e you will talk, a n d you m u s t m a k e sure that the venue is a p p r o p r i a t e . The following are facility checklists for i n f o r m a l a n d formal talks:
Is follow up required?
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by by ASTM International Copyright9 2005 www.astm.org Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
33
There are probably other facilities concerns, but my message is that a successful presentation requires attention to details regarding the presentation situation. [One o f the worst facility problems that I have encountered happened at a talk to an engineering society chapter meeting. The meeting was held in a restaurant--like most technical society meetings. I have attended countless technical society meetings, and they always have a screen and overhead projector available through the society. I committed the cardinal sin of not asking if projector facilities were available. Before the dinner that preceded my talk, I asked if I could test the overhead projector and PA system. My host said, "What overhead projection system? What PA system?" In this instant, I learned that my sixty overhead slides were useless, and my talk on surface engineering would be a big failure without visual aids. My host scrambled to take some action. He ended up sending a society member to his company and borrowing an overhead projector from a conference room (and missing dinner). We had to project on a pair of white drapes because there were no white walls in the room, and the speaking facilities were not what they should have been. It was my fault for not checking well ahead o f my scheduled talk.] RULE: Check facilities and presentation e q u i p m e n t before preparing your presentation. Make your talk suit the situation.
knowledge, which in turn produces the confidence to speak to the world. [My wife is a reticent public speaker; she tells me to keep my mouth shut at public meetings that we attend together. However, I have seen her speak out forcefully in front of hundreds of people when she feels that she must speak out against an evil. Passion tbr her cause overwhelms her meek personality, and she becomes an effective public speaker] RULE: Have passion for your message. Passion will negate personality traits that may inhibit your ability to speak in front of others.
Delivery
A well-prepared talk will ensure successful delivery. Public speaking can bring fear to a 300-pound NFL fullback, but if you know what you are going to say, if you believe what you are going to say, and you really want to get your message across, your fears about public speaking will disappear after your opening sentence. RULE: Be prepared, honest, and sincere for any public speaking event. Confidence is the secret to speaking in front of a group, and knowing your subject to the n th degree is the mainstay of confidence. When you stand in front of a group and speak, you cannot hide your persona. A "quiet" person may tend to speak too softly with few words; a boastful person may tend to go the "windbag" route. A dishonest or insincere person may tend to talk in superlatives and make statements that cannot be true (if you think about it). So an audience will not believe unsubstantiated claims; they tend to make the entire presentation unbelievable. RULE: If y o u want an audience to accept a fact, s h o w t h e m the basis or calculations. If you have personality traits that run counter to public speaking, you can overcome them with sincerity and subject
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
The biggest p r o b l e m w i t h nervousness before a n d during a p r e s e n t a t i o n is a n n o y i n g y o u r a u d i e n c e with nervous tics: 9 Saying "OK" often 9 Saying "like" often 9 Saying "you know" often 9 Saying "Ahhh" often 9 Touching y o u r nose often 9 Touching y o u r ear often 9 Blinking often 9 Sniffing often 9 Shuffling notes 9 Jingling c h a n g e in y o u r p o c k e t 9 Fidgeting with the pointer, etc. There are p r o b a b l y as m a n y forms of nervous m a n n e r isms as there are speakers. The l e g e n d a r y U.S. TV p e r s o n ality, J o h n n y Carson, w o u l d p u t his finger aside his nose w h e n e v e r he was a p p r e h e n s i v e a b o u t w h a t he was saying o r s o m e t h i n g that a guest on his show was saying. So, even the greatest speakers do these things. However, they a n n o y the a u d i e n c e a n d d e t r a c t from y o u r message. So you need to find ways to m i t i g a t e these p o t e n t i a l distractions. RULE: L e a r n to r e c o g n i z e y o u r n e r v o u s tics, a n d w o r k o n them. Of course the first step in dealing with nervous tics is to find yours. You c a n r e h e a r s e to a trusted p e r s o n a n d have h i m o r h e r identify them. You can v i d e o t a p e a talk o r a reh e a r s a l a n d evaluate yourself. Nervous tics that involve the use of m e a n i n g l e s s w o r d s a n d p h r a s e s (OK, like, I m e a n , y o u know, ahhh) are y o u r s u b c o n s c i o u s w a y s of p r o d u c i n g a p a u s e so that y o u r b r a i n c a n c o m e u p with s o m e m o r e words. Practice saying n o t h i n g w h e n you n e e d a p a u s e to t h i n k of a word. This w o r k s well. RULE: U s e a p a u s e to r e p l a c e n e r v o u s w o r d s , b u t k e e p p a u s e s s h o r t a n d few. Touching a n d fidgeting is a habit, a n d h a b i t s can b e b r o ken. It takes twenty-one days to create a h a b i t a n d twentyone to b r e a k one. So if y o u t e n d to place y o u r finger alongside y o u r nose w h e n y o u b e c o m e nervous in speaking, it will take s o m e effort to b r e a k this habit. You m u s t w o r k at it. It takes time. S o m e t i m e s r e h e a r s i n g to a full-length m i r r o r can force you to stop a nervous tic. You see it in the mirror. It could go u n n o t i c e d if you r e h e a r s e w i t h o u t the m i r r o r o r t a p i n g yourself. RULE: P r a c t i c e to r e d u c e y o u r n e r v o u s g e s t u r e s .
that was beamed around the U.S. when I gave it, but it was also taped, and the conference administrators gave me a copy o f the VCR tape. I had never seen myself talk on a videotape before, and I thought that I talked too fast. I had about sixty slides, and getting that many slides into an hour talk made me talk too fast.]
RULE: D o n o t t a l k t o o fast. On the o t h e r end of the s p e c t r u m , s o m e speakers talk so slowly that the a u d i e n c e tends to think of the w o r d s that are coming. The a u d i e n c e is distracted. However, there a r e s o m e o c c a s i o n s w h e r e slowing, but not halting, is best. English is the official l a n g u a g e for m o s t i n t e r n a t i o n a l technical conferences, ! suspect b e c a u s e it is t a u g h t in so m a n y countries. In a n y case, you m a y b e talking to a n a u d i e n c e w h e r e English m a y be a s e c o n d l a n g u a g e for m o r e t h a n half of the audience. Talking m o r e slowly, not louder, will help t h e m significantly. [I studied French for four years in high school, and in the third year the exams mostly consisted o f the teacher reading something in French and the students translating it to English. I f she talked slowly and clearly, I would do well. If some o f your audience does not have English as the first language, they are more apt to get your message if you talk slowly and clearly like my third-year French teacher. P.S.: Late in my career, I had projects that involved working at my company's plant in France. I had a hard time understanding conversations because conversations tend to have a fast pace.] RULE: Talk s l o w l y b u t c l e a r l y w h e n s o m e o f t h e a u d i e n c e m a y h a v e a d i f f e r e n t first l a n g u a g e .
Tone
I m e n t i o n e d in the previous d i s c u s s i o n to s p e a k m o r e clearly, n o t louder, w h e n talking to people with a n o t h e r first language. I have w i t n e s s e d that w h e n people visit a c o u n t r y that speaks a n o t h e r language, they try to m a k e w h a t they are saying to the p e r s o n with a n o t h e r language clearer by talking louder, b u t j u s t as fast as ever. [I found myself" doing this a n u m b e r o f times in foreign countries. I had to make a conscious effort to control this tendency.] Talking with n o r m a l tone, b u t slowly a n d clearly, helps. RULE: W h e n s p e a k i n g t o an a u d i e n c e w i t h a n o t h e r first l a n g u a g e , d o n o t c o n f u s e l o u d e r for clearer. Of course, m a k i n g a p r e s e n t a t i o n in a m o n o t o n e is a n a l m o s t certain way to p u t a n a u d i e n c e to sleep. If y o u d a r k e n the r o o m for y o u r visual aids, there is a very strong possibility that eight p e r c e n t of y o u r a u d i e n c e will be in d r e a m land. If you talk w i t h excitement, y o u r a u d i e n c e will catch s o m e of y o u r e n t h u s i a s m a n d p a y a t t e n t i o n to y o u r message. Talking softly has a l m o s t the s a m e effect as a m o n o t o n e . You m u s t talk loudly e n o u g h for people to h e a r you. If you have an ax to grind on a p a r t i c u l a r subject, you m a y c o m e across as "angry" to y o u r audience. Technical
Rate of Delivery
S o m e t i m e s a p r e s e n t a t i o n can fail b e c a u s e you talk too fast o r too slow. [I presented a one-hour talk for a satellite course
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
p r e s e n t a t i o n s m u s t always be objective. You s h o u l d never s h o w a n g e r o r a p p r e h e n s i o n in w h a t y o u a r e discussing. An angry, flippant, o r a p p r e h e n s i v e tone will have a negative effect on y o u r credibility. RULE: S p e a k in a n e u t r a l t o n e w i t h e n t h u s i a s m for y o u r subject.
they use the English w o r d "friction" s y n o n y m o u s l y with sliding wear. "Scoring" is a n o t h e r w o r d that m e a n s s o m e t h i n g different in different countries.
RULE: Avoid c o n t r o v e r s i a l o r i l l - d e f i n e d w o r d s .
Speech Characteristics
If you have s o m e type of a c c e n t o r speech i m p a i r m e n t , j u s t deal with it, b u t do not a p o l o g i z e to y o u r audience. This will call t h e i r a t t e n t i o n to it, a n d t h e n it could b e c o m e distracting. F o r example, I have seen m a n y s p e a k e r s w h o have a first l a n g u a g e o t h e r t h a n E n g l i s h start their talk in English b y saying, "Please excuse m y p o o r English" a n d p r o c e e d with their talk. This sensitizes the audience. RULE: Do not excuse speech or language deficiencies. Just do your best. Audiences a r e very u n d e r s t a n d i n g a b o u t l a n g u a g e difficulties, accents, a n d even speech i m p e d i m e n t s . [I have a good friend w h o occasionally stutters. He is a frequent speaker at technical conferences, and many times I have witnessed h i m spend several seconds trying to sound a "C" or some other letter at the start o f a word, and I have never seen any adverse audience effect. In ['act, I have never heard anybody even mention that he stutters. He deals with it by not letting it inhibit his public speaking.]
RULE: If t h e r e is n o e y e c o n t a c t , t h e r e is n o communication. You c a n sit at a bistro table w i t h a n o t h e r p e r s o n a n d talk, b u t if you do n o t m a k e eye c o n t a c t w i t h the p e r s o n sitting across from you, he o r she will think that y o u a r e talking to s o m e b o d y else. The s a m e is true for a n audience. If you do n o t talk to them, they will t h i n k t h a t y o u are talking to yourself, a n d they will go on w i t h their business. Making eye c o n t a c t w i t h p e o p l e w h e n you talk also d e m o n s t r a t e s sincerity, a n d a n a u d i e n c e is m o r e a p t to a c c e p t a speaker's m e s s a g e if it feels t h a t the s p e a k e r is sincere. A n o t h e r a s p e c t of eye c o n t a c t is t h a t s o m e s p e a k e r s m a k e eye c o n t a c t w i t h a p a r t i c u l a r p e r s o n in the a u d i e n c e a n d s e e m i n g l y give t h e i r entire p r e s e n t a t i o n to that person. The r e m a i n d e r of the a u d i e n c e feels i g n o r e d a n d will stop listening. I s u s p e c t that this p r a c t i c e m a y have c o m e from s o m e p u b l i c speaking course. S o m e b o d y m a y have r e c o m m e n d e d p i c k i n g o u t a p e r s o n in the a u d i e n c e a n d talking to that p e r s o n to ease n e r v o u s n e s s o r s o m e such thing. I reco m m e n d s c a n n i n g the audience. L o o k at p e o p l e to the left, center, right, first row, m i d d l e row, a n d last row. [Sometimes I look at the facial expressions o f people in the audience. I f I see a person who looks puzzled, I will make eye contact for a minute or two with that person--hoping that his or her puzzlement disappears. Sometimes I will make eye contact with those w h o seem to be agreeing with a yes head gesture or those who seem to be disagreeing. Sometimes I add an anecdote to get the nay-sayers to nod in agreement.] RULE: M a k e e y e c o n t a c t w i t h e v e r y o n e in t h e a u d i e n c e , n o t j u s t a few. Finally, there a r e speakers w h o look at the floor, their notes, the ceiling, o r out into s p a c e o r w h o r e a d t h e i r talk. All of these p r e c l u d e eye c o n t a c t a n d conveying y o u r message. If you a r e m a k i n g a sensitive p r e s e n t a t i o n , such as a p r e s s release, a n d y o u do n o t w a n t to say even one w r o n g word, y o u m a y need to r e a d y o u r p r e s e n t a t i o n , b u t eye contact is still necessary. M a n y U.S. p o l i t i c i a n s b e c o m e very a d e p t a t r e a d i n g a n d m a k i n g eye contact. S o m e can m a i n tain a r a t i o of three p a r t s eye c o n t a c t to one reading; s o m e only d o one p a r t eye c o n t a c t to one p a r t reading, b u t this still is very acceptable. This is d o n e b y r e a d i n g a sentence o r
Colloquialisms
Your p r e s e n t a t i o n should also c o n s i d e r colloquialisms. M o s t l a n g u a g e s have w o r d s a n d sayings that m e a n s o m e t h i n g in one c o u n t r y that m a y n o t have the s a m e m e a n i n g in a n o t h e r country. In English the w o r d "holiday" m e a n s a v a c a t i o n in E u r o p e a n d m a n y f o r m e r colonial countries, b u t in the U.S.A. it m e a n s a d a y d e s i g n a t e d b y a c o m p a n y o r the gove r n m e n t as a n o - w o r k day. There are m a n y w o r d s a n d p h r a s e s in every l a n g u a g e that do n o t have universal m e a n ings to all "users" of t h a t language. Needless to say, these w o r d s a n d p h r a s e s s h o u l d be avoided in m a k i n g p r e s e n t a tions.
RULE: Avoid c o l l o q u i a l i s m s .
Colloquialisms c a n confuse y o u r a u d i e n c e a n d have a negative effect on y o u r message. P r o n u n c i a t i o n s a r e a similar factor. The English w o r d " r o o f ' can be p r o n o u n c e d a d o z e n different ways in the U.S., d e p e n d i n g o n w h a t p a r t of the c o u n t r y y o u c o m e from. P r o n u n c i a t i o n differences c a n be dealt with b y avoiding such c o n t r o v e r s i a l words. S o m e t e c h n i c a l w o r d s have different m e a n i n g s in different countries. F o r example, the w o r d "friction" m e a n s resistance to m o t i o n w h e n one a t t e m p t s to slide o r roll one b o d y on another. In R u s s i a a n d the f o r m e r U.S.S.R. countries,
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
two, quickly m e m o r i z i n g it a n d speaking it to the audience. This system works. You have a precise p r e s e n t a t i o n , a n d the eye c o n t a c t that you u s e d b e t w e e n r e a d i n g s suggests sincerity in y o u r message.
Appearance
In U.S. i n d u s t r y it is c o m m o n for e m p l o y e e s of big c o m p a nies to c o m e to w o r k in b u s i n e s s casual garb. As I m e n t i o n e d in m y strategy discussion, you need to dissect y o u r presentation s i t u a t i o n a n d p l a n y o u r talk to fit y o u r a u d i e n c e a n d the facility. If you are m a k i n g a p r o p o s a l to a g r o u p of c o m p a n y executives w h o m y o u k n o w dress in golf clothes, then golf clothes m a y be a p p r o p r i a t e dress for y o u r p r e s e n t a t i o n . If you are giving a f o r m a l p a p e r at a conference, a suit is the only safe w a y to m a k e sure that y o u r a p p a r e l is a p p r o p r i a t e .
[I used to bring paperwork to company informational meetings and do it during department talks. I was still listening but I would usually be writing throughout the presentation. This used to really annoy my last supervisor He would get all confused if he saw me reading or writing when he was talking to the group. He asked me to stop, and I did, but it sure reduced my productivity. ] W h e n a u d i e n c e m e m b e r s do s o m e t h i n g or s o m e o t h e r event occurs that d r a w s y o u r attention, y o u should not get rattled a n d d i s r u p t y o u r p r e s e n t a t i o n .
Summary--Delivery
There are m a n y things that h a p p e n d u r i n g a p r e s e n t a t i o n , a n d m a n y things that we do that can be a d i s t r a c t i o n to us or to the audience. Effective public speaking requires that you deal with these things. If it is s o m e t h i n g that you a r e doing that distracts the audience, stop it. If it is s o m e t h i n g that a n n o y s you, l e a r n to hide y o u r annoyance. F o c u s on delivering y o u r message. On f o r m a l talks to g r o u p s that you m a y n o t b e f a m i l i a r with, talk with the a u d i e n c e before y o u r p r e s e n t a t i o n to learn w h a t they are interested in. Try to m a t c h their interest. M a k e sure that all can see a n d h e a r you. Make eye c o n t a c t with the entire audience. S h o w e n t h u s i a s m for y o u r subject, a n d try to get the audience's interest with a crisp a n d illustrative delivery. Use h a n d gestures, a n d avoid r e a d i n g p a r t of y o u r talk. If the s i t u a t i o n is such, you can interface with the a u d i e n c e with questions such as: "How m a n y of you have used this technique?" Then do it. Personal a n e c d o t e s can be effective in m a k i n g a p r e s e n t a t i o n m o r e interesting. If y o u r talk s e e m s to be languishing, c h a n g e y o u r c o n t e n t or delivery. If it seems like the a u d i e n c e is m o r e interested in therm a l s p r a y processes than plating, then e m p h a s i z e the former. You c a n c h a n g e a talk in p r o g r e s s by h o w m u c h y o u e l u c i d a t e on each topic. Tailor the talk to the audience. I c o n c l u d e this discussion of an effective p u b l i c s p e a k e r with the following list of suggestions that p e r t a i n to effective p u b l i c speaking. 9 Come prepared. 9 Use effective visual aids. 9 S p e a k to the whole audience, not one person, not the p r o j e c t i o n screen. 9 Make eye c o n t a c t with all of the audience. * S p e a k at the right pace. 9 S p e a k clearly with the right tone a n d volume. 9 W o r k visual aids into y o u r talk. 9 Control nervous tics. 9 Never chew gum. 9 Be neat, a p p r o p r i a t e l y dressed, a n d g r o o m e d . 9 Control p a u s e s (ahhh!) a n d m e a n i n g l e s s w o r d s (like OK). 9 Effectively use visual aids. 9 Do n o t insult the a u d i e n c e b y p a r t i a l l y covering overheads. 9 L e a r n the PA system ahead, a n d do n o t "swallow" a h a n d mic.
Getting Rattled
S o m e t i m e s a s p e a k e r can get rattled by s o m e i n c i d e n t o r by s o m e o n e in the a u d i e n c e a n d his o r her p r e s e n t a t i o n suffers.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
9 9 9 9
Stayw i t h i n y o u r allotted time. S h o w e n t h u s i a s m , use gestures, w a l k around. Do n o t over analyze a visual aid. F i n i s h w i t h y o u r message.
Taking Questions
A l m o s t all oral p r e s e n t a t i o n s p r o m p t questions from the audience. H o w you a n s w e r these questions c a n also have a n effect on the success of the entire p r e s e n t a t i o n . E a c h situation is different, b u t there a r e c e r t a i n rules t h a t a p p l y to all.
S o m e s p e a k e r s d o u b l e - t a l k their w a y a r o u n d a q u e s t i o n w h e n they have no answer. The a u d i e n c e senses that you are d o i n g this a n d thinks less of y o u for it. Be direct, a n d a d m i t that y o u do n o t k n o w the answer. This does n o t a n n o y the audience. They k n o w that you d o n o t k n o w everything. S o m e q u e s t i o n p e r i o d s get o u t of c o n t r o l a n d can be t o o long o r c a n be t a k e n over b y a clique. Your host o r m o d e r a t o r c a n serve as a n a p p r o p r i a t e i n t e r m e d i a t e to see that q u e s t i o n i n g stays in control. If there is n o m o d e r a t o r , as in an i n f o r m a l talk, y o u s h o u l d take control a n d set the g r o u n d
rules.
"I'll take three questions, a n d t h e n we m u s t m o v e on."
RULE: Repeat the question to make sure that all of the audience heard it.
RULE: If there is a moderator present, let him or her control the questioning session.
Often speakers do not k n o w w h e r e the light controls a r e in a facility, a n d he o r she takes questions in the dark. This is an ineffective q u e s t i o n i n g session b e c a u s e the s p e a k e r o r m o d e r a t o r c a n n o t see r a i s e d hands, a n d t h e s p e a k e r c a n n o t see the audience. W h e n y o u p r e p a r e for a talk, check o u t the facilities, a n d m a k e sure t h a t the r o o m will b e lit for the q u e s t i o n i n g period. S o m e speakers s e e m to have to have a slide to a n s w e r all questions. A p e r s o n m i g h t ask: "In y o u r slide o n the erosion r a t e of W C / C o , y o u s h o w e d the m a x i m u m e r o s i o n r a t e to o c c u r at 45 ~. W h y is that?" The s p e a k e r t h e n f u m b l e s t h r o u g h a d i s o r g a n i z e d pile of overheads, d r o p p i n g several, t h e n after three a t t e m p t s , finds the r i g h t overhead, p o i n t s at the data, a n d a n s w e r s the question. It was n o t n e c e s s a r y to r e s u r r e c t the visual aid. In fact, it is a l m o s t always i n a p p r o p r i a t e to b r i n g b a c k a visual aid in the questioning session b e c a u s e it takes too long. If y o u are m a k i n g a p r o p o s a l to the g e n e r a l manager, a n d she has a q u e s t i o n a b o u t y o u r p r o d u c t i o n data, y o u m a y w a n t to retrieve these data. Do n o t f u m b l e o r get rattled. If you have a n o r d e r l y s y s t e m for controlling y o u r visual aids (as in with c o m p u t e r slide shows), retrieving c a n be d o n e w i t h o u t the " d r o p p e d overhead" disaster. M y final rule o n questions is to be b r i e f in y o u r a n s w e r s to questions a n d to p r o h i b i t a u d i e n c e m e m b e r s f r o m m a k i n g political s t a t e m e n t s p o s e d as a questions. S o m e t i m e s p e o p l e ask "questions" j u s t to m a k e advertising-type s t a t e m e n t s a b o u t t h e i r w o r k o r university o r r e s e a r c h proclivities. [I
used to regularly attend conferences on welding research that were always attended by a pompous Ph.D. from a welding company. He invariably had a "question"for every speaker, and all of his "questions" tended to refute the speaker's position. This questioner was trying to demonstrate that he knew more than any of the speakers. I suspect that he no longer did research and had nothing to write papers about, so he quenched his need to pontificate to lesser individuals by asking "questions." These kinds of people need to be dealt with by not taking their questions or by responding with a curt response that suggests that his question was not sincere.]
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
I will c o n c l u d e this d i s c u s s i o n on questioning w i t h a c o m m e n t on a n e w type of questioning that I r e c e n t l y r a n into at an i n t e r n a t i o n a l tribology r e s e a r c h conference. As m a n y as ten o u t of thirty speakers, all from Europe, e n d e d their oral p r e s e n t a t i o n s with a slide tided "open questions," w h e r e they essentially listed a d d i t i o n a l r e s e a r c h that needs to be done on the speakers' topics. S o m e s p e a k e r s even omitted conclusions a n d r e c o m m e n d a t i o n s . Needless to say, I do not r e c o m m e n d o m i s s i o n of conclusions a n d ending the pres e n t a t i o n with a list of u n a n s w e r e d questions. It does n o t s e e m to be a p p r o p r i a t e for a f o r m a l p r e s e n t a t i o n at a conference. A p a p e r should be p r e s e n t e d to share a l e a r n i n g that a d d s to the b o d y of knowledge. Questions do n o t a d d to the b o d y of knowledge, a n d they do not belong in a s u m m a r y s l i d e - - m y opinion. I r e c o m m e n d t r a d i t i o n a l closures.
after-talk a u d i e n c e interfaces are p r o b a b l y the best w a y to learn w h e t h e r you met y o u r p r e s e n t a t i o n objective. You will l e a r n w h e t h e r they u n d e r s t o o d a n d a c c e p t e d y o u r message.
Assessing Results
A technical c a r e e r involves m a n y oral p r e s e n t a t i o n opportunities, so it is a good idea to try to find o u t h o w effective y o u are in m a k i n g oral p r e s e n t a t i o n s . Do you get y o u r message across? Do you e n h a n c e o r d i m i n i s h y o u r " c o m p a n y position" b y y o u r p r e s e n t a t i o n techniques? You n e e d to k n o w h o w y o u are doing. This c a n be d o n e with a survey after a formal p r e s e n t a t i o n . S o m e t e c h n i c a l conferences require it. S o m e t i m e s it is a p p r o p r i a t e to m a k e y o u r o w n survey, b u t r e s p e c t y o u r a u d i e n c e by m a k i n g it brief. M a r k 1 to 5 with 5 as b e s t 1. Did this p r e s e n t a t i o n share n e w information? 2. Was the delivery a p p r o p r i a t e ? 3. Was the talk c o m p l e t e d w i t h i n its allotted time? 4. Were you given a m p l e o p p o r t u n i t y to ask questions? 5. Overall, h o w valuable was this talk to you? S o m e t i m e s talk q u e s t i o n n a i r e s are two pages long w i t h thirty questions. Your a u d i e n c e just sat for an h o u r listening to you. They w a n t to get up a n d move about. They do; n o t w a n t to sit for a n o t h e r 15 m i n u t e s to fill out a survey form.
Summary
This b o o k is an a t t e m p t to p u t into p r i n t p r e s e n t a t i o n techniques l e a r n e d over thirty-five years of m a k i n g p r e s e n t a t i o n s in i n d u s t r y a n d to technical organizations. My "rules," of course, are only suggestions. There are no p r e s e n t a t i o n police to accost y o u if you b r e a k a "rule." They are mentor-like suggestions b a s e d u p o n p e r s o n a l experiences a n d suggestions from expert speakers. The m o s t i m p o r t a n t m e s s a g e that I c a n leave you with is to w o r k at y o u r p r e s e n t a t i o n techniques. Giving presentations is a skill, a n d skills r e q u i r e p r a c t i c e a n d c o n t i n u a l i m p r o v e m e n t . Keep in m i n d that skilled lawyers w i n cases. They convince juries regardless of guilt. A p r o p e r p r e s e n t a tion can sway an a u d i e n c e similarly. If you do all the things that I discussed correctly, yon will get y o u r m e s s a g e across; you will get w h a t you w a n t from a p r e s e n t a t i o n .
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
MNL54-EB/Jan. 2005
3.2 Background~Introduction
If you are to achieve your goal in making a presentation, you need to make that goal known to the audience--why are you giving this presentation, and what are your expectations of the audience. A "problem" statement is often appropriate (Fig. 3), followed by your purpose, objective, scope, and format (Figs. 4, 5, 6, and 7). Many times, photos and data can be used to fortify the "problem statement." However, keep introductory material to a minimum. The "meat" of the presentation should be in the body, not the introduction.
1.3 Format
1. Making a slide template Title 2. Creating a word slide . ~ . . ~ Section head Summary slides, conclusions, recommendations, acknowledgments
Copyright 4O by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by by ASTM International Copyright* 2005 www.astm.org Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
dience (Fig. 11). Never put more than one graph on a slide; avoid plotting multiple variables on a graph, and avoid colors that m a y be troublesome for color-blind people (red, green, yellow, etc.).
posure to saturated steam if the cobalt exceeds six percent." Conclusions are global statements derived from test results.
7.2 Recommendations
Some presentations w a r r a n t r e c o m m e n d a t i o n s - - s o m e do not. A presentation to an "information only" audience probably does not w a r r a n t them, but a presentation to your management probably does. They need to be very brief statements of action words. They should be bulleted or n u m b e r e d if there are more than one (Fig. 15).
7.3 Acknowledgments
7.0 Creating a Line Art Slide
Most technical talks describe equipment or techniques that m a y be difficult to describe with words. Schematics (Fig. 13) are an excellent aid for helping the audience understand a test or device. These can be imported into y o u r presentation from CAD drawings or other files. Like recommendations, sometimes aclolowledgments are a p p r o p r i a t e - - s o m e t i m e s they are not. Usually they are only appropriate for presentations of work that involved collaboration of multiple organizations or were funded by some governmental or institutional organization that wants their findings publicized (Fig. 16).
8.0 Summary
7.1 Conclusions
Conclusions need to be succinct, usually bulleted statements deduced from y o u r work (Fig. 14). Always ask yourself whether it is a "result" or a "conclusion." Never restate results as conclusions. The result of a corrosion study is that the test material corroded. The conclusion is that "cobalt based cemented carbides cannot withstand continuous exKeep word slides concise. Never use paragraphs. Never fill the field with words. Make w o r d slides first, because they will be the bulk of your presentation, then do graphics and photos. Save the word slides (possibly in a separate file) in case y o u r c o m p u t e r crashes in creating graphics or photo slides, which are more challenging.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
MNL54-EB/Jan. 2005
Bud
Labs:
Copyright 42 by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Bud L ~
Fig. 2--Sample title slide.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Problems
9 No s t a n d a r d test 9 No p u b l i s h e d d a t a f r o m manufacturers 9 Users m u s t b u y a n d t r y
Bud
Lab~J ~
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
P u r ose of P r o ' e c t
Develop a test to screen ball bearings for low friction
Bud LBbs~
Fig. 4--Purpose slide.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
O b ' e c t i v e of Pa er
To promote an international standard for friction testing of rolling element bearings
Bud LabsS
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
(<10 cm)
9 Tested bearings as received (with seals, grease, etc.) 9 Only used the inclined plane test
Bud Labsl
Fig. 6--Scope slide.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Format of Presentation
9 W h a t is k n o w n about rolling friction 9 Test d e v e l o p m e n t 9 Interlaboratory standardization tests 9 Test results 9 Conclusions
Bud,Lah~2
,,
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
:Bud L B ~
Fig. 8--Section head slide.
Test Results
B u d LBtJ~2'
Fig. 9--Section head slide.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
0.3
r"
o
IL
O.2S
L,.
0.2
"6
.~
Q 01 o
o
o.15
T
i i iM
03
o.o2
o
.I,
i | i 3
m i,
m iw i
Bearing Number
Rolling friction coefficients based on the average of the data from all five labs
Bud L B b ~ |
Fig. 11--Graph slide.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Conclusions
9 The test is feasible 9 Test variability is acceptable (but lab dependent) 9 The test ranks bearings correctly from low to high friction
Bud LBbsI ~
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Recommendations
1. Use the loop abrasion test for product qualification. 2. Include test data in product data sheets.
Bud L
b~i
Fig. 15--Recommendation slide.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Acknowled ment
The New York State Manufacturing Initiative Office under contract #29049 funded this work. We also thank the Ithaca Research Labs for their assistance with our microscopy studies.
B ~ d L B b ~
~ ....
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
MNL54-EB/Jan. 2005
Appendix II1: Presentation Checklist--Things to Consider in Preparing and Delivering a Technical Presentation
Strategy:
1. 2. 3. 4. 5. 6. 7. Who asked for the t a l k ? Who will be your audience? What do you expect to achieve by your talk? How will your presentation present value to your audience? Where will your talk happen? When will your talk happen? Will you be able to use slides? overheads? chalkboard? all of the above? other? No AV equipment? PA system? How long can you speak? Do you need a handout? talk on CD? talk on computer file? other documentation? What is your overall strategy for this presentation? 10. What will you do to control your time limit? And the time limit of others (for meetings)?
8. 9.
10.
Audience Accommodation:
1. What is the composition of your audience? 2. What will interest them? 3. What "level" should your presentation be? detailed? general? theoretical? basic? other? 4. What visual aids are appropriate for this audience? _ _ 5. Can your visual aids be seen by all? 6. Will you be heard by all? 7. Is there anything in your presentation that might offend (or blame) anyone in your audience? 8. If you are expecting action from audience members, have you made this clear? 9. Have you included basic presentation elements? _ _ format? agenda? introduction?
"dig deeper?" 6. Have you established the level of detail that is appropriate for your audience? 7. Have you established a time budget for each element of your talk? 8. Are you completely comfortable with your thesis?
Presentation Preparation:
1. Have you merged your strategy, audience information, and research into a presentation outline? purpose? objective? scope? format? sections? 2. Do you know what you are going to say? 3. Will visual aids assist your thesis? 4. What kind? slides? overheads? computer? charts? chalkboards? other? 5. Did you storyboard your slides? 6. Have you checked slide font size for audience readability? 7. Do you have any cluttered or illegible slides? more than 50 words?
body?
conclusions? recommendations ?
Copyright 56 by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
8. 9. 10.
m o r e than 1 graph? m o r e t h a n 1 photo? paragraphs? less than 30 p o i n t text? too m u c h a d o r n m e n t ? n o t e n o u g h clear space? Have you p r o j e c t e d y o u r slides a n d viewed t h e m f r o m the farthest p o i n t in y o u r a u d i e n c e ? Does y o u r talk c o n t a i n facts, not conjecture? Have y o u told y o u r a u d i e n c e . . . . W h y you d i d the work? W h a t they will hear? W h a t subject y o u are a d d r e s s i n g at all times? Have you h a d y o u r finished p r e s e n t a t i o n reviewed by a trusted peer? Have you a d d r e s s e d a c k n o w l e d g m e n t s ? Do you have a r e a d y - r e f e r e n c e / o u t l i n e to use d u r i n g your presentation?
graph, etc.? 7. Do y o u have text slides to delineate p a r t s of y o u r talk (procedure, test p r o g r a m , test results, etc.)? 8. Do y o u r slides use strange fonts? If so, why? 9. Are y o u r slides cluttered with distracting features? _ _ clip art? excess texture? h a r d to see colors? too d a r k b a c k g r o u n d ? 10. Are y o u r g r a p h s simple (per p e r s o n on the street test)? 11. Do y o u r slides s u m m a r i z e , o r are they "all the data"? 12. Do y o u r c h a r t s a n d g r a p h s c o n t a i n suitable captions? 13. Have you c o n s i d e r e d color b l i n d attendees in choice of colors?
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
MNL54-EB/Jan. 2005
Appendix IV: Suggestions from AV Professionals on Slide Preparation (,rom various sources)
9 9 9 9 9 9 9 9 9 Use h o r i z o n t a l f o r m a t (landscape) for all slides. Allow w h i t e s p a c e ( b o r d e r on top, b o t t o m a n d sides) a r o u n d s u b s t a n c e of the slide. Color b a c k g r o u n d s only with p a l e colors (pale yellow, very light blue, light g r a y etc.). Use a single d a r k c o l o r for words. Use only one g r a p h i c (photo, graph, sketch etc.) p e r slide. Use "Times" font for w o r d slides. Use Helvetica font for graphs. Avoid tables. Consider colorblind audience members when preparing slides. Most c a n n o t see r e d o n black, yellow on blue, line 9 9 9 9 9 9 9 art w i t h r e d a n d green lines. (Also, c o l o r b l i n d p e o p l e c a n n o t usually see the r e d dot f r o m l a s e r p o i n t e r s - - u s e a m o u s e arrow.) Make titles bold. Use a m i n i m u m of 24-point font for w o r d slides. Use only u p p e r c a s e a n d l o w e r c a s e lettering. L i m i t text to eight lines p e r slide. Use italics for subtitles a n d keywords. Place presenter's n a m e a n d affiliation in small font in the b o t t o m left h a n d c o r n e r of each slide. N u m b e r slides in small font: (page _ _ of __) in b o t t o m right c o r n e r of slide if they are to serve as a h a n d o u t .
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 58 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.
Copyright by ASTM Int'l (all rights reserved); Sat Dec 19 10:18:22 EST 2009 Downloaded/printed by Universidade de Braslia pursuant to License Agreement. No further reproductions authorized.