Академический Документы
Профессиональный Документы
Культура Документы
of counts
LR201 3 LCD/1999
LR2045 4 LED/19999
LR2045S 4 LED/19999
LR2065 4 LCD/19999
Test Current/Maximum 0.01mA-10mA current injection Current selection Resistance Range Accuracy Resolution Measurement Method Input Power Supply Automatic 2-20K 0.5%+4 1m 4wire DC (9V)
0.1mA-1A
100A-1A
0.1mA-10A
Automatic 2m-20K (0.03%+4) 0.1 4wire AC Mains (230V,50Hz) (Rechargeable battery)NiCd 1.2V 7AH
Battery
9V & 1.5V
Internal Memory PC Interface Open Circuit Voltage Safety Standards Model Type Gross Weight
NO 1.1V
RS232 10V
USB 15V
NO 10V
Bench top 4 Kg approx test leads with GP kelvin clip & test lead with crocodile clip
Accessories
Fully protected against reversal of battery Special Features polarity & overloads,drop, dust,shockproof To test the fuses, detonators in Explosive environments like ordnance factories.
Applications
To measure resistance of Weld To measure resistance of joints, Busbar To measure hot & cold Weld joints, Busbar Contacts, Circuit winding resistance of Contacts, Circuit Breakers, Breakers, motors, generators, Transformer winding Transformers alternators & resistance, copper coils & winding resistance, transformers. other resistive loads
XWRM-10 4 LCD/19999
PCRM-100S 3 LCD/1999
10A,1A,100mA,10mA
100A
Automatic 200-2000 2% 0.1@200 1@2000 4wire Mains & Battery operation 26V(Recharge able battery)2Nos of 6V-4.5AH 99 readings storage facility USB CE & compatible with IEC56 standards
99 test results & 3 sets of heat run test results USB 42VDC
Bench top 10 Kg approx 20 mtr long cable with heavy duty C clamp with 75 mm jaw opening
Dual channel for winding resistance measurement of primary & secondary side of two winding transformer,simultane ously.
High resolution .
Suitable to measure cold & hot winding resistance measurement of transformer winding.
Circuit breaker contact resistance,electrode resistance,busbar joints,electrode resistance measurement,isolator contacts,cable drum