Академический Документы
Профессиональный Документы
Культура Документы
Table of Contents
Introduction and Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3
Style Designation How to Order Series 800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Style Designation How to Order Series 900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Materials of Construction Series 800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Materials of Construction Series 900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Caps and Lifting Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
O-ring Seat Materials with Pressure and Temperature Limits . . . . . . . . . . . . . . . . . . . . 9
Specifications Series 800
Threaded and Flanged Connections (USCS Units) . . . . . . . . . . . . . . . . . . . . . . . . 10-11
Threaded and Flanged Connections [Metric Units] . . . . . . . . . . . . . . . . . . . . . . . . 12-13
Specifications Series 900
Threaded and Flanged Connections (USCS Units) . . . . . . . . . . . . . . . . . . . . . . . . 14-15
Threaded and Flanged Connections [Metric Units] . . . . . . . . . . . . . . . . . . . . . . . . 16-17
Flow Control
AG or its affiliates in the United States and/or other countries. All other brand names, product names, or
trademarks belong to their respective holders.
Copyright 2009 Tyco Flow Control. All rights reserved.
CROMC-0294-US-0906
Seat Design
Series 800 and Series 900 pressure
relief valves are available with flat metalto-metal or elastomer or TFE O-ring soft
seats for optimum seat tightness and
minimal maintenance. Details on O-ring
materials and pressure/temperature
limitations are on page 9. All O-rings are
standard commercial sizes.
Blowdown
Blowdown is the difference between the
opening and reseating pressure of a
pressure relief valve expressed as a
percentage of set pressure. Series 900
blowdown is fixed and non-adjustable
(typically less than 20%) on liquid, gas
and vapor applications.
Series 800 blowdown is adjustable with
a typical adjustable range of 5 to 15
percent. Each valve is shipped with a
factory ring setting which will provide a
nominal blowdown of 10%, unless
specified otherwise.
Introduction
Crosby Series 800 adjustable and
Series 900 OMNI-TRIM are reliable
pressure relief valves for industrial
applications. Their design and options
provide maximum versatility and
premium performance.
Effective orifice areas are 0.074
(Series 900 only), 0.110, 0.196, 0.307
and 0.503 sq. in. [47.7, 71.0, 126, 198
and 325 sq. mm]. The Series 900 is also
available with a 0.049 sq. in. effective
orifice area for liquid service
applications only. Contact your sales
representative for additional information.
Standard materials of construction are
carbon steel cylinder; 316 stainless
steel base, disc insert, disc holder and
guide; and 17-7PH stainless steel
spring. The Series 800 adjusting ring,
set screw and gasket are also
316 stainless steel as standard.
Copyright 2009 Tyco Flow Control. All rights reserved.
Metal-to-Metal Seat
CROMC-0294
2
Technical Data
Series 800
Temperature range: -450F to +750F
[-268C to +399C]
General Applications
Air
Series 900
Temperature range: -450F to +750F
[-268C to +399C]
Pressure limits: 5000 psig [344 barg]
Steam: 1000 psig [68.9 barg]
Gas
Vapor
Steam
Liquid (Series 900)
Thermal relief (Series 900)
Metal-to-Metal Seat
CROMC-0294
3
2nd Digit
3rd Digit
4th Digit
5th Digit
6th Digit
7th Digit
8th Digit
Series
Effective
Orifice Area
Maximum
Set
Pressure1
Seat
Material6
Materials of
Construction2,7
Connection
Size - NPS3
Connection
Type3,4,5
Caps and
Lifting Levers
8 - Series 800
Adjustable
Blowdown
Relief
Valve
1 - 1500 psig
[103 barg]
1 - Metal
2 - BUNA-N
3 - Viton*
4 - Ethylene
Propylene
Rubber
(EPR)
5 - Kalrez**
6 - TFE
7 - Other
(Specify)
0 - Standard Materials
Carbon Steel
Cylinder
316 SS Base, Disc I
Insert, Disc Holder,
Guide and Adj. Ring
17-7PH SS Spring
-50F to +750F
[-45.5C to +398C]
1 - 3/4 x 1
M - MNPT x FNPT
2-1x1
F - FNPT x FNPT
3 - 1 x 11/2
1 - 150# RF x 150# RF
4 - 11/2 x 11/2
2 - 300# RF x 150# RF
5 - 11/2 x 2
3 - 600# RF x 150# RF
6-2x2
7 - Other (Specify)
7 - 11/2 x 21/2
8 - Male SW x Male SW 8
A - Standard
Threaded Cap
B - Threaded Cap
with Test Rod
D - Packed Lifting
Lever
E - Packed Lifting
Lever with Test
Rod
7 - NACE MR-017520029
Carbon Steel
Cylinder
316 SS Base, Disc
Insert, Disc Holder,
Guide and Adj. Ring
Inconel X750
Spring
With 316 SS
Washers
-50F to +750F
[-45.5C to +398C]
8 - Other (Specify)
Notes:
How to Order
Example 1: To specify a 3/4 x 1 MNPT x FNPT Series 800 valve with a 0.110 sq. in.
[70.96 sq. mm] effective area, BUNA-N seats, all 316 stainless steel materials,
standard threaded cap, process fluid operating temperature at 150F [66C], and
set at 175 psig [12.07 barg], use the following style designation: 861211MA
Example 2: To specify a 11/2 x 2 MNPT x FNPT Series 800 valve with a 0.307 sq. in.
[198.0 sq. mm] effective area, metal seats, standard materials, packed lifting lever
with test rod, for saturated steam service set at 200 psig [13.79 barg], use the
following style designation: 881105ME-STM
CROMC-0294
4
2nd Digit
3rd Digit
4th Digit
5th Digit
6th Digit
7th Digit
8th Digit
Series
Effective
Orifice Area
Maximum
Set
Pressure2,6
Seat
Material6
Materials of
Construction1,3
Connection
Size - NPS7
Connection
Type4,5,8
Caps and
Levers
1 - 1500 psig
[103.42
barg]
2 - 2500 psig
[172.36
barg]
5 - 5000 psig
[344.74
barg]
9 - Series 900
Fixed
Blowdown
Relief
Valve
1 - Metal
2 - BUNA-N
3 - Viton
4 - Ethylene
Propylene
Rubber
(EPR)
5-
Kalrez
6 - TFE
7 - Other
(Specify)
0 - Standard Materials
Carbon Steel Cylinder
316 SS Base, Disc Insert,
Disc Holder and Guide
17-7PH SS Spring
-50F to +750F
[-45.6C to +399C]
0 - 1/2 x 1
M - MNPT x FNPT
1 - 3/4 x 1
F - FNPT x FNPT
2-1x1
1 - 150# RF x 150# RF
3 - 1 x 11/2
2 - 300# RF x 150# RF
4 - 11/2 x 11/2
3 - 600# RF x 150# RF
5 - 11/2 x 2
4 - 1500# RF x 300# RF
6-2x2
5 - 2500# RF x 300# RF
7 - 11/2 x 21/2
7 - Other (Specify)
9 - Other
8 - Male SW x Male SW 9
A - Standard
Threaded Cap
B - Threaded Cap
with Test Rod
D - Packed Lifting
Lever
E - Packed Lifting
Lever with Test
Rod
9 - MNPT x FNPT
3/4 x 1 Bolted
Cylinder
(951 Orifice only)
Available Options
Special materials not catalogued such as
Alloy 20, Titanium, etc.
7 - NACE MR-0175-200210
Carbon Steel Cylinder
316 SS Base, Disc Insert,
Disc Holder & Guide
Inconel X750 Spring
With 316 SS Washers
-50F to +750F
[-45.6C to +399C]
8 - Other (Specify)
How to Order
Example 1: To specify a 3/4 x 1 MNPT x FNPT Series 900 valve with a 0.074 sq. in.
[47.74 sq. mm] effective area, BUNA-N seats, all 316 stainless steel materials,
standard threaded cap, process fluid operating temperature at 150F [66C], and
set at 175 psig [12.07 barg], use the following style designation: 951211MA
Example 2: To specify a 11/2 x 2 MNPT x FNPT Series 900 valve with a 0.307 sq. in.
[198.0 sq. mm] effective area, metal seats, standard materials, packed lifting lever
with test rod, for saturated steam service set at 200 psig [13.79 barg], use the following
style designation: 981105ME-STM
Caution: Refer to pages 14 - 17 to
verify the Series 900 model specified is
available in the orifice, connection size
and connection type combination
selected.
Notes:
CROMC-0294
5
Threaded Connections
Metal-to-Metal Seat
Flanged Connections
Materials of Construction
Standard Materials
Material Designation
Part
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
30
31
32
33
34
35
36
Part
Name
Base
Cylinder
Disc Insert3
Disc Holder
O-ring2,3
Guide
Spindle
Spring
Spring Washers
Adjusting Bolt
Adjusting Bolt Nut
Type A Cap5
Nameplate4
Drive Screws4
Seal and Wire
Lap Joint Stub End
(Inlet)
Inlet Flange
Lap Joint Stub End
(Outlet)
Outlet Flange
Adjusting Ring
Set Screw
Set Screw Gasket3
(0)
(1)
-50F to +750F
-450F to +500F
[-45.6C to +399C] [-268C to +260C]
(2)
(3)
-450F to +750F
[-268C to +399C]
-50F to +750F
[-45.6C to +399C]
(4)
(7)
-320F to +750F
[-196C to +399C]
NACE MR0175-2002
Level II
-50F to +750F
[-45.6C to +399C]
316 SS
Carbon Steel
SA-216 Gr. WCB
316 SS
316 SS1
Specify
316 SS1
416 SS
17-7PH SS
416 SS
416 SS
Carbon Steel
Carbon Steel
300 Series SS
SS
Lead and SS
316 SS
316 SS
316 SS
SA-351 Gr. CF8M
316 SS
316 SS1
Specify
316 SS1
316 SS
316 SS
316 SS
316 SS
316 SS
316 SS
300 Series SS
SS
Lead and SS
316 SS
316 SS
316 SS
SA-351 Gr. CF8M
316 SS
316 SS1
Specify
316 SS1
316 SS
Inconel X750
316 SS
316 SS
316 SS
316 SS
300 Series SS
SS
Lead and SS
316 SS
Monel
Carbon Steel
SA-216 Gr. WCB
Monel
Monel
Specify
Monel
416 SS
Inconel X750
316 SS
416 SS
Carbon Steel
Carbon Steel
300 Series SS
SS
Lead and SS
Monel
Monel
Monel7
ASTM A 494 Gr. M35-1
Monel
Monel
Specify
Monel
Monel
Inconel X750
Monel
Monel
Monel
Monel
300 Series SS
SS
Lead and SS
Monel
316 SS
Carbon Steel
SA-216 Gr. WCB
316 SS
316 SS1
Specify
316 SS1
316 SS
Inconel X750
316 SS
316 SS
316 SS
Carbon Steel
300 Series SS
SS
Lead and SS
316 SS
Carbon Steel6
Carbon Steel6
316 SS
316 SS
316 SS
316 SS
Carbon Steel6
Carbon Steel6
Carbon Steel6
Monel
Carbon Steel6
Carbon Steel6
Carbon Steel6
316 SS
316 SS
316 SS
316 SS
316 SS
316 SS
316 SS
316 SS
316 SS
316 SS
316 SS
Carbon Steel6
Monel
Monel
316 SS
Carbon Steel6
Monel
Monel
Monel
Carbon Steel6
316 SS
316 SS
316 SS
Notes:
1. Material is copper-nickel alloy for steam
applications.
2. Refer to page 9 for pressure/temperature
limits and available O-ring materials.
3. Recommended spare part.
4. Not shown.
CROMC-0294
6
Threaded Connections
Flanged Connections
Metal-to-Metal Seat
Materials of Construction
Standard Materials
Material Designation
Part Part
No. Name
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
30
31
32
33
Base
Cylinder
Disc Insert3
Disc Holder
O-ring2,3
Guide
Spindle 8
Spring
Spring Washers
Adjusting Bolt
Adj. Bolt Nut
Type A Cap4
Nameplate5
Drive Screws5
Seal and Wire
Lap Joint Stub
End (Inlet)
Inlet Flange
Lap Joint Stub
End (Outlet)
Outlet Flange
(0)
(2)
(3)
(4)
(5)
(6)
(7)
-50F to +750F
-450F to +500F
[-45.6C to +399C] [-268C to +260C]
-450F to +750F
[-268C to +399C]
-50F to +750F
-320F to +750F
[-45.6C to +399C] [-196C to +399C]
NACE MR0175-2002
Level II
-50F to +750F
-320F to +750F
-50F to +750F
[-45.6C to +399C] [-196C to +399C] [-45.6C to +399C]
316 SS
Carbon Steel
316 SS
316 SS
316 SS
316 SS
Monel
Carbon Steel
Hastelloy C
Carbon Steel
Carbon Steel6
Carbon Steel6
316 SS
316 SS
Carbon Steel6
316 SS
Monel
Monel7
ASTM A 494
Gr. M35-1
Monel
Monel
Specify
Monel
Monel
Inconel X750
Monel
Monel
Monel
Monel
300 Series SS
SS
Lead and SS
Monel
Hastelloy C
Hastelloy C
SA-494
Gr. CW-12MW
Hastelloy C
Hastelloy C
Specify
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
300 Series SS
SS
Lead and SS
Hastelloy C
316 SS
316 SS
Carbon Steel6
Carbon Steel6
316 SS
Carbon Steel6
316 SS
Carbon Steel
SA-216 Gr. WCB
316 SS
316 SS1
Specify
316 SS
316 SS
Inconel X750
316 SS
316 SS
316 SS
Carbon Steel
300 Series SS
SS
Lead and SS
316 SS
Carbon Steel6
Monel
Carbon Steel(6
Carbon Steel6
Carbon Steel6
Hastelloy C
Carbon Steel6
Carbon Steel6
Carbon Steel6
Carbon Steel6
Carbon Steel6
Carbon Steel6
Notes:
1. Material is 17-4PH SS for steam applications.
2. Refer to page 9 for pressure/temperature
limits and available O-ring materials. Used
on soft seated valve only.
3. Recommended spare part.
CROMC-0294
7
27
27
22
26
28
12
26
21
21
29
16
25
25
19
24
Type B
Threaded Cap
with Test Rod
View Showing
Valve Gagged
Types B and E
with Test Rod
0, 3, 5, 7
1, 2
Cap Part
Type No. Part Name
A
12
Cap
Steel
316 SS
Monel
Hastelloy C
16
Cap
Steel
316 SS
Monel
Hastelloy C
Hastelloy
27
Cap Plug
Steel
316 SS
Monel
28
Viton
Viton
Viton
Viton
29
Test Rod
Steel
(Plated)
Steel
(Plated)
Steel
(Plated)
Steel
(Plated)
18
Cap
Steel
316 SS
Monel
Hastelloy C
19
Cam
416 SS
316 SS
Monel
Hastelloy C
20
Cam O-ring
Viton
Viton
Viton
Viton
21
Cam Sleeve
416 SS
316 SS
Monel
Hastelloy C
22
Viton
Viton
Viton
Viton
23
Lever
Steel
Steel
Steel
Steel
24
Lever Pin
302 SS
302 SS
302 SS
302 SS
Hastelloy C
25
Spindle Nut
Steel
316 SS
Monel
26
Locknut
Steel
(Plated)
300 Series
SS
Monel
Hastelloy C
18
Cap
Steel
316 SS
Monel
Hastelloy C
19
Cam
416 SS
316 SS
Monel
Hastelloy C
20
Cam O-ring
Viton
Viton
Viton
Viton
21
Cam Sleeve
416 SS
316 SS
Monel
Hastelloy C
22
Viton
Viton
Viton
Viton
23
Lever
Steel
Steel
Steel
Steel
24
Lever Pin
302 SS
302 SS
302 SS
302 SS
25
Spindle Nut
Steel
316 SS
Monel
Hastelloy C
Hastelloy C
Hastelloy C
26
Locknut
Steel
(Plated)
300 Series
SS
Monel
27
Cap Plug
Steel
316 SS
Monel
28
Viton
Viton
Viton
Viton
29
Test Rod
Steel
(Plated)
Steel
(Plated)
Steel
(Plated)
Steel
(Plated)
24
20
20
23
23
Type D
Packed Lifting Lever
Materials of Construction
Material Designation
19
18
18
Type A
Threaded Cap
28
22
CROMC-0294
8
Type E
Packed Lifting Lever
with Test Rod
Series 900
Series 800
Inlet Temperature
F [C]
Maximum
Material
Minimum
Minimum
Maximum
BUNA-N
15 [1.03]
1500 [103.44]
2500 [172.41]
-50 [-45.6]
+250 [+121.1]
Viton
15 [1.03]
1500 [103.44]
2500 [172.41]
0 [-17.8]
+400 [+204.4]
EPR*
15 [1.03]
1500 [103.44]
2500 [172.41]
-50 [-45.6]
+250 [+121.1]
Kalrez
15 [1.03]
1500 [103.44]
2500 [172.41]
0 [-17.8]
+500 [+260.0]
TFE
100 [6.89]
1500 [103.44]
2500 [172.41]
-50 [-45.6]
+500 [+260.0]
Silicone
15 [1.03]
1500 [103.44]
1500 [103.44]
-50 [-45.6]
+400 [+204.4]
Note:
1. For steam service, metal-to-metal seats are recommended.
Contact your sales representative if soft seats are required.
CROMC-0294
9
Specifications Series 800 Threaded Connections (NPT), USCS (U.S. Customary System) Units
C
Approx.
C
Approx.
A
(1/8")
A
(1/8")
B
(1/8")
B
(1/8")
FNPT x FNPT
MNPT x FNPT
Connection
Size
(NPS)
Inlet
Outlet
Minimum
Set Press.
psig
Maximum1,3
Set Press.
psig
Maximum
Outlet
Pressure
psig
Temperature1
Range
(F)
Dimensions (in.)
A
C2
Approx.
Weight
(lbs.)
Style 861 Series 800 with No. 6 Orifice (0.110 sq. in.) and 1500 psig Maximum Set Pressure
3/4
8611( )1M
8611( )2M
1
3/4
8611( )1F
8611( )2F
15
1500
400
-450/+750
31/8
115/16
117/8
10
15
1500
400
-450/+750
33/8
115/16
121/8
10
15
1500
400
-450/+750
21/2
115/16
111/4
10
-450/+750
27/8
115/16
115/8
10
15
1500
400
Style 871 Series 800 with No. 7 Orifice (0.196 sq. in.) and 1500 psig Maximum Set Pressure
8711( )3M
11/2
15
1500
400
-450/+750
33/4
21/2
133/8
17
8711( )4M
11/2
11/2
15
1500
400
-450/+750
33/4
21/2
133/8
17
8711( )3F
11/2
15
1500
400
-450/+750
31/8
21/2
123/4
17
8711( )4F
11/2
11/2
-450/+750
33/8
21/2
13
17
15
1500
400
Style 881 Series 800 with No. 8 Orifice (0.307 sq. in.) and 1500 psig Maximum Set Pressure
8811( )5M
11/2
15
1500
400
-450/+750
41/2
31/4
163/8
33
8811( )6M
15
1500
400
-450/+750
41/2
31/4
163/8
33
8811( )5F
11/2
15
1500
400
-450/+750
37/8
31/4
153/4
33
8811( )6F
15
1500
400
-450/+750
31/4
157/8
33
Style 891 Series 800 with No. 9 Orifice (0.503 sq. in.) and 1500 psig Maximum Set Pressure
8911( )7M
11/2
21/2
15
1500
400
-450/+750
41/2
31/4
163/8
32
8911( )7F
11/2
21/2
15
1500
400
-450/+750
37/8
31/4
153/4
32
Notes:
1. Minimum/maximum set pressures and
temperatures shown apply to metal seated
valves only. Refer to page 9 for soft seat
pressure and temperature limits.
CROMC-0294
10
Specifications Series 800 Flanged Connections (NPT), USCS (U.S. Customary System) Units
C
Approx.
A
(1/8")
B
(1/8")
Flange x Flange
Valve
Style
Number
Connection
Size
(NPS)
Inlet
Outlet
Std. ANSI
Lap Joint
Stub End
Flanges3
Inlet
Outlet
Maximum
Set Pressure1,2,5
@ 100F
(psig)
Dimensions
(in.)
B
C4
Approx.
Weight
(lbs.)
285
43/8
41/4
133/16
14
41/4
133/16
15
Style 861 Series 800 with No. 6 Orifice (0.110 sq. in.)
8611( )11
3/4
8611( )12
3/4
300
150
740
43/8
8611( )13
3/4
600
150
1480
43/8
41/4
133/16
15
150
150
8611( )21
150
150
285
45/8
41/4
137/16
14
8611( )22
300
150
740
45/8
41/4
137/16
16
8611( )23
600
150
1480
45/8
41/4
137/16
16
Style 871 Series 800 with No. 7 Orifice (0.196 sq. in.)
8711( )31
11/2
150
150
285
51/8
1413/16
24
8711( )32
11/2
300
150
740
51/8
1413/16
25
8711( )33
11/2
600
150
1480
51/8
1413/16
25
8711( )41
11/2
11/2
150
150
285
51/2
153/16
26
8711( )42
11/2
11/2
300
150
740
51/2
153/16
29
8711( )43
11/2
11/2
600
150
1480
51/2
153/16
29
Notes:
1. Maximum set pressures shown are based
on carbon steel flanges. Pressure limits for
316 SS flanges may be lower. Contact your
sales representative.
2. Maximum set pressures apply to metal
seated valves only; refer to page 9 for limits
for soft seat construction.
CROMC-0294
11
C
Approx.
C
Approx.
A
[3 mm]
A
[3 mm]
[3 mm]
B
[3 mm]
B
FNPT x FNPT
MNPT x FNPT
Connection
Size
(NPS)
Inlet
Outlet
Minimum
Set Press.
[barg]*
Maximum1,3
Set Press.
[barg]*
Maximum
Outlet
Pressure
[barg]*
Temperature1
Range
[C]
Dimensions (in.)
[mm]
A
B
C2
Approx.
Weight
[kg]
Style 861 Series 800 with No. 6 Orifice [70.96 sq. mm] and 103.42 barg Maximum Set Pressure
3/4
8611( )1M
8611( )2M
1
3/4
8611( )1F
8611( )2F
1.03
103.42
27.58
-268/+399
79
49
302
1.03
103.42
27.58
-268/+399
86
49
308
4
4
1.03
103.42
27.58
-268/+399
64
49
286
1.03
103.42
27.58
-268/+399
73
49
295
Style 871 Series 800 with No. 7 Orifice [126.4 sq. mm] and 103.42 barg Maximum Set Pressure
8711( )3M
11/2
1.03
103.42
27.58
-268/+399
95
64
340
8711( )4M
11/2
11/2
1.03
103.42
27.58
-268/+399
95
64
340
8711( )3F
11/2
1.03
103.42
27.58
-268/+399
79
64
324
8711( )4F
11/2
11/2
1.03
103.42
27.58
-268/+399
86
64
330
Style 881 Series 800 with No. 8 Orifice [198.0 sq. mm] and 103.42 Maximum Set Pressure
8811( )5M
11/2
1.03
103.42
27.58
-268/+399
114
83
416
15
8811( )6M
1.03
103.42
27.58
-268/+399
114
83
416
15
8811( )5F
11/2
1.03
103.42
27.58
-268/+399
98
83
400
15
8811( )6F
1.03
103.42
27.58
-268/+399
102
83
403
15
Style 891 Series 800 with No. 9 Orifice [324.5 sq. mm] and 103.42 barg Maximum Set Pressure
8911( )7M
11/2
21/2
1.03
103.42
27.58
-268/+399
114
83
416
15
8911( )7F
11/2
21/2
1.03
103.42
27.58
-268/+399
98
83
400
15
Notes:
1. Minimum/maximum set pressures and
temperatures shown apply to metal seated
valves only. Refer to page 9 for pressure and
temperature limits for soft seat construction.
CROMC-0294
12
C
C
Approx.
Approx.
A
A
[3 mm]
[3
[3
[3 mm]
mm]
B
B
Flange x Flange
Valve
Style
Number
Connection
Size
(NPS)
Inlet
Outlet
Std. ANSI
Lap Joint
Stub End
Flanges3
Inlet
Outlet
Maximum
Set Pressure1,2,5
@ 37.8C
[barg]
Dimensions
[mm]
B
C4
Approx.
Weight
[kg]
Style 861 Series 800 with No. 6 Orifice [70.96 sq. mm]
8611( )11
3/4
150
150
19.65
111
108
335
8611( )12
3/4
300
150
51.02
111
108
335
8611( )13
3/4
600
150
102.04
111
108
335
7
7
8611( )21
150
150
19.65
117
108
341
8611( )22
300
150
51.02
117
108
341
8611( )23
600
150
102.04
117
108
341
Style 871 Series 800 with No. 7 Orifice [126.4 sq. mm]
8711( )31
11/2
150
150
19.65
130
127
376
11
8711( )32
11/2
300
150
51.02
130
127
376
11
8711( )33
11/2
600
150
102.04
130
127
376
11
8711( )41
11/2
11/2
150
150
19.65
140
127
386
12
8711( )42
11/2
11/2
300
150
51.02
140
127
386
13
8711( )43
11/2
11/2
600
150
102.04
140
127
386
13
Notes:
1. Maximum set pressures shown are based on
carbon steel flanges. Pressure limits for 316
SS flanges may be lower. Contact your sales
representative.
2. Maximum set pressures apply to metal
seated valves only; Refer to page 9 for limits
for soft seat construction.
CROMC-0294
13
Specifications Series 900 OMNI-TRIM Threaded Connections (NPT), USCS (U.S. Customary System) Units
Series 900 Dimensions and Weights, Pressure/Temperature Ratings
Valve
Style
Number
Connection
Size
(NPS)
Inlet Outlet
Max.
Min.4
Max.1,3 Outlet
Set Press. Set Press. Press.
(psig)
(psig)
(psig)
Temp.1
Range
(F)
Dimensions
(in.)
A
B
C2
App.
Wt.
(lbs.)
C
Approx.
Style 951 Series 900 with No. 5 Orifice (0.074 sq. in.)* and 1500 psig Maximum Set Pressure
9511( )0M
9511( )1M
9511( )2M
1/2
3/4
1
1
5
5
1500
1500
400
400
-450/+750
-450/+750
3
3
13/4
13/4
103/8
103/8
7
7
1500
400
-450/+750
31/4
13/4
105/8
Style 951 Series 900 Bolted Connection with No. 5 Orifice (0.074 sq. in.) and 1500 psig Max. Set Pressure5
3/4
9511( )19
1
5
1500
400
-450/+750 613/16 13/4
141/4 12
Style 955 Series 900 with No. 5 Orifice (0.074 sq. in.)* and 5000 psig Maximum Set Pressure
1/2
1
1501
5000
400
-450/+750 31/8
115/16 117/8
9551( )0M
3/4
9551( )1M
1
1501
5000
400
-450/+750 31/8
115/16 117/8
121/8
Style 961 Series 900 with No. 6 Orifice (0.110 sq. in.) and 1500 psig Maximum Set Pressure
1/2
1
5
1500
400
-450/+750 31/8
115/16 117/8
9611( )0M
3/4
9611( )1M
1
5
1500
400
-450/+750 31/8
115/16 117/8
115/16 121/8
9611( )2M
1
1
5
1500
400
-450/+750 33/8
3/4
9611( )1F
1
5
1500
400
-450/+750 21/2
115/16 111/4
10
10
10
10
9551( )2M
1501
5000
400
-450/+750
33/8
115/8
10
Style 965 Series 900 with No. 6 Orifice (0.110 sq. in.) and 5000 psig Maximum Set Pressure
3/4
1
1501
5000
400
-450/+750 31/2
21/2
131/8
9651( )1M
9651( )2M
1
1
1501
5000
400
-450/+750 33/4
21/2
133/8
1501
5000
400
-450/+750 33/4
21/2
133/8
9651( )3M
1
11/2
3/4
9651( )1F
1
1501
5000
400
-450/+750 27/8
21/2
121/2
21/2
123/4
9651( )2F
1
1
1501
5000
400
-450/+750 31/8
9651( )3F
1
11/2
1501
5000
400
-450/+750 31/8
21/2
123/4
16
16
16
16
16
16
Style 972 Series 900 with No. 7 Orifice (0.196 sq. in.) and 2500 psig Maximum Set Pressure
6
2500
400
-450/+750 33/4
21/2
133/8
9721( )3M
1
11/2
9721( )4M
11/2
11/2
6
2500
400
-450/+750 33/4
21/2
133/8
6
2500
400
-450/+750 31/8
21/2
123/4
9721( )3F
1
11/2
9721( )4F
11/2
11/2
6
2500
400
-450/+750 33/8
21/2
13
17
17
17
17
Style 981 Series 900 with No. 8 Orifice (0.307 sq. in.) and 1500 psig Maximum Set Pressure
2
7
1500
400
-450/+750 41/2
31/4
163/8
9811( )5M
11/2
9811( )6M
2
2
7
1500
400
-450/+750 41/2
31/4
163/8
2
7
1500
400
-450/+750 37/8
31/4
153/4
9811( )5F
11/2
9811( )6F
2
2
7
1500
400
-450/+750 4
31/4
157/8
33
33
33
33
Style 991 Series 900 with No. 9 Orifice (0.503 sq. in.) and 1500 psig Maximum Set Pressure
21/2
7
1500
400
-450/+750 41/2
31/4
163/8
9911( )7M
11/2
9911( )7F
11/2
21/2
7
1500
400
-450/+750 37/8
31/4
153/4
32
32
9611( )2F
1500
400
-450/+750
27/8
115/16
9
9
115/16
A
(1/8")
(1/8")
B
MNPT x FNPT
C
Approx.
A
(1/8")
* Contact your sales representative for availability of No. 5 (0.074 sq. in.) Orifice with FNPT inlet.
(1/8")
B
Notes:
1. Minimum/maximum set pressures and
temperatures shown apply to metal seated
valves only. Refer to page 9 for pressure and
temperature limits for soft seat construction.
5. See page 3.
Copyright 2006
2009 Tyco Flow Control. All rights reserved.
CROMC-0294
14
FNPT x FNPT
Specifications Series 900 OMNI-TRIM Flanged Connections, USCS (U.S. Customary System) Units
Series 900 Dimensions and Weights, Pressure/Temperature Ratings
Valve
Style
Number
(1/8")
B
Connection
Size
(NPS)
Inlet
Outlet
Std. ANSI
Lap Joint
Max.1,2,6 Max.
Stub End
Set Press. Outlet
Dimensions
Flanges4
@ 100F Press.
(in.)
(psig)
(psig)
Inlet
Outlet
A
B
C5
Approx.
Wt.
(lbs.)
Style 951 Series 900 with No. 5 Orifice (0.074 sq. in.)
C
Approx.
A
(1/8")
Flange x Flange
1
1
1
1
1
1
1
1
1
1
150
300
600
150
300
600
150
300
150
150
150
150
150
150
150
150
285
740
1480
285
740
1480
285
740
285
285
285
285
285
285
285
285
41/4
41/4
41/4
41/4
41/4
41/4
41/2
41/2
4
4
4
4
4
4
4
4
1111/16
1111/16
1111/16
1111/16
1111/16
1111/16
1115/16
1115/16
10
11
11
11
12
12
12
13
600
150
1480
285
41/2
1115/16
13
Style 955 Series 900 with No. 5 Orifice (0.074 sq. in.)
3/4
3
1
1500
9551( )14
3/4
3
9551( )15
1
2500
3
9551( )24
1
1
1500
3
9551( )25
1
1
2500
3705
5000
3705
5000
4003
4003
4003
4003
51/2
51/2
53/4
53/4
41/2
41/2
41/2
41/2
145/16
145/16
149/16
149/16
19
21
21
25
Style 961 Series 900 with No. 6 Orifice (0.110 sq. in.)
1/2
1
150
150
9611( )01
1/2
9611( )02
1
300
150
1/2
1
6007
150
9611( )03
3/4
9611( )11
1
150
150
3/4
1
300
150
9611( )12
3/4
9611( )13
1
600
150
9611( )21
1
1
150
150
9611( )22
1
1
300
150
285
740
1480
285
740
1480
285
740
285
285
285
285
285
285
285
285
43/8
43/8
43/8
43/8
43/8
43/8
45/8
45/8
41/4
41/4
41/4
41/4
41/4
41/4
41/4
41/4
133/16
133/16
133/16
133/16
133/16
133/16
137/16
137/16
14
15
15
14
15
15
14
16
1480
285
45/8
41/4
137/16
16
Style 965 Series 900 with No. 6 Orifice (0.110 sq. in.)
3/4
3
1
1500
9651( )14
3
9651( )24
1
1
1500
3
9651( )25
1
1
2500
3
9651( )34
1
11/2
1500
3705
3705
5000
3705
4003
4003
4003
4003
6
61/4
61/4
61/4
5
5
5
53/4
1511/16
1515/16
1515/16
1515/16
26
29
32
29
11/2
5000
4003
61/4
53/4
1515/16
35
Style 972 Series 900 with No. 7 Orifice (0.196 sq. in.)
150
150
9721( )31
1
11/2
9721( )32
1
11/2
300
150
600
150
9721( )33
1
11/2
3
9721( )34
1
11/2
1500
11/2
150
150
9721( )41
11/2
9721( )42
11/2
11/2
300
150
11/2
600
150
9721( )43
11/2
3
9721( )44
11/2
11/2
1500
285
740
1480
2500
285
740
1480
2500
285
285
285
4003
285
285
285
4003
51/8
51/8
51/8
6
51/2
51/2
51/2
6
5
5
5
53/4
5
5
5
53/4
1413/16
1413/16
1413/16
1511/16
153/16
153/16
153/16
1511/16
24
25
25
32
26
29
29
38
Style 981 Series 900 with No. 8 Orifice (0.307 sq. in.)
2
150
150
9811( )51
11/2
9811( )52
11/2
2
300
150
2
600
150
9811( )53
11/2
9811( )61
2
2
150
150
9811( )62
2
2
300
150
9811( )63
2
2
600
150
285
740
1480
285
740
1480
285
285
285
285
285
285
61/2
61/2
61/2
63/4
63/4
63/4
6
6
6
6
6
6
187/16
187/16
187/16
1811/16
1811/16
1811/16
44
47
47
46
48
49
Style 991 Series 900 with No. 9 Orifice (0.503 sq. in.)
21/2
150
150
285
9911( )71
11/2
9911( )72
11/2
21/2
300
150
740
285
285
61/2
61/2
61/2
61/2
187/16
187/16
47
50
285
61/2
61/2
187/16
50
9511( )01
9511( )02
9511( )03
9511( )11
9511( )12
9511( )13
9511( )21
9511( )22
9511( )23
9611( )23
Notes:
1. Maximum set pressures shown are based
on carbon steel flanges. Pressure limits for
316 SS flanges may be lower. Contact your
sales representative.
2. Maximum set pressures apply to metal
seated valves only; refer to page 9 for limits
for soft seat construction.
3. ANSI CL 300 supplied; however, the
maximum back pressure is 400 psig.
4. Flanges are supplied with a serrated face
per ANSI B16.5. Other facings/standards
(i.e., DIN) are also available.
5. Dimension C shown is for Type A cap.
For Type B cap, add 1/4" to C dimension
(an additional 2" is required for test rod head
clearance).
For Type D cap, add 5/8" to C dimension.
For Type E cap, add 7/8" to C dimension
(an additional 2" is required for test rod head
clearance).
6. Maximum set pressure for steam service is
1000 psig.
7. ANSI CI 600 flange integral with base.
9651( )35
9911( )73
1/2
1/2
1/2
3/4
3/4
3/4
11/2
21/2
600
2500
600
150
150
1480
Copyright 2006
2009 Tyco Flow Control. All rights reserved.
CROMC-0294
15
Connection
Size
(NPS)
Inlet Outlet
Max.
Min.4
Max.1,3 Outlet
Set Press. Set Press. Press.
[barg]
[barg] [barg]*
Temp.1
Range
[C]
Dimensions
[mm]
A
B
C2
Appr.
Wt.
[kg]
C
Approx.
Style 951 Series 900 with No. 5 Orifice [47.74 sq. mm]** and 103.42 barg Maximum Set Pressure
9511( )0M
9511( )1M
9511( )2M
1/2
3/4
1
1
0.34
0.34
103.42
103.42
27.58
27.58
-268/+399
-268/+399
76
76
45
45
264
264
3
3
0.34
103.42
27.58
-268/+399
83
45
270
Style 951 Series 900 Bolted Cylinder with No. 5 Orifice [47.74 sq. mm] and 103.42 barg Max. Set Pressure
3/4
9511( )19
1
0.34
103.42
27.58 -268/+399
173
44
362
5
Style 955 Series 900 with No. 5 Orifice [47.74 sq. mm]** and 344.74 barg Maximum Set Pressure
1/2
1
103.49
344.74
27.58 -268/+399
79
49
302
9551( )0M
3/4
9551( )1M
1
103.49
344.74
27.58 -268/+399
79
49
302
9551( )2M
308
Style 961 Series 900 with No. 6 Orifice [70.96 sq. mm] and 103.42 barg Maximum Set Pressure
1/2
1
0.34
103.42
27.58 -268/+399
79
49
302
9611( )0M
3/4
9611( )1M
1
0.34
103.42
27.58 -268/+399
79
49
302
9611( )2M
1
1
0.34
103.42
27.58 -268/+399
86
49
308
3/4
9611( )1F
1
0.34
103.42
27.58 -268/+399
64
49
286
4
4
4
4
9611( )2F
103.49
0.34
344.74
103.42
27.58
27.58
-268/+399
-268/+399
86
73
49
4
4
49
295
Style 965 Series 900 with No. 6 Orifice [70.96 sq. mm] and 344.74 barg Maximum Set Pressure
3/4
1
103.49
344.74
27.58 -268/+399
89
64
333
9651( )1M
9651( )2M
1
1
103.49
344.74
27.58 -268/+399
95
64
340
103.49
344.74
27.58 -268/+399
95
64
340
9651( )3M
1
11/2
3/4
9651( )1F
1
103.49
344.74
27.58 -268/+399
73
64
318
9651( )2F
1
1
103.49
344.74
27.58 -268/+399
79
64
324
9651( )3F
1
11/2
103.49
344.74
27.58 -268/+399
79
64
324
7
7
7
7
7
7
Style 972 Series 900 with No. 7 Orifice [126.4 sq. mm] and 172.36 barg Maximum Set Pressure
0.41
172.36
27.58 -268/+399
95
64
340
9721( )3M
1
11/2
9721( )4M
11/2
11/2
0.41
172.36
27.58 -268/+399
95
64
340
0.41
172.36
27.58 -268/+399
79
64
324
9721( )3F
1
11/2
9721( )4F
11/2
11/2
0.41
172.36
27.58 -268/+399
86
64
330
8
8
8
8
Style 981 Series 900 with No. 8 Orifice [198.0 sq. mm] and 103.42 barg Maximum Set Pressure
2
0.48
103.42
27.58 -268/+399
114
83
416
9811( )5M
11/2
9811( )6M
2
2
0.48
103.42
27.58 -268/+399
114
83
416
2
0.48
103.42
27.58 -268/+399
98
83
400
9811( )5F
11/2
9811( )6F
2
2
0.48
103.42
27.58 -268/+399
102
83
403
15
15
15
15
Style 991 Series 900 with No. 9 Orifice [324.5 sq. mm] and 103.42 barg Maximum Set Pressure
21/2
0.48
103.42
27.58 -268/+399
114
83
416
9911( )7M
11/2
9911( )7F
11/2
21/2
0.48
103.42
27.58 -268/+399
98
83
400
15
15
A
[3 mm]
[3 mm]
B
MNPT x FNPT
C
Approx.
A
[3 mm]
Notes:
1. Minimum/maximum set pressures and
temperatures shown apply to metal seated
valves only. Refer to page 9 for pressure and
temperature limits for soft seat construction.
2. Dimension C shown is for Type A cap.
For Type B cap, add 6 mm to C dimension
(an additional 51 mm is required for test rod
head clearance).
CROMC-0294
16
[3 mm]
B
FNPT x FNPT
Valve
Style
Number
[3 mm]
B
Connection
Size
(NPS)
Inlet
Outlet
Std. ANSI
Lap Joint
Max.1,2,6
Max.
Stub End
Set Press. Outlet
Flanges4
@ 37.8C Press.
[barg]
[barg]
Inlet
Outlet
Dimensions
[mm]
A
B
C5
Appr.
Wt.
[kg]
Style 951 Series 900 with No. 5 Orifice [47.74 sq. mm]
C
Approx.
A
[3 mm]
Flange x Flange
1
1
150
300
600
150
300
600
150
300
150
150
150
150
150
150
150
150
19.65
51.02
102.04
19.65
51.02
102.04
19.65
51.02
19.65
19.65
19.65
19.65
19.65
19.65
19.65
19.65
108
108
108
108
108
108
114
114
102
102
102
102
102
102
102
102
297
297
297
297
297
297
303
303
5
5
5
5
6
6
5
6
600
150
102.04
19.65
114
102
303
Style 955 Series 900 with No. 5 Orifice [47.74 sq. mm]
3/4
3
1
1500
255.45
9551( )14
3/4
3
9551( )15
1
2500
344.74
3
255.45
9551( )24
1
1
1500
3
9551( )25
1
1
2500
344.74
27.583
27.583
27.583
27.583
140
140
146
146
114
114
114
114
364
364
370
370
8
10
10
11
Style 961 Series 900 with No. 6 Orifice [70.96 sq. mm]
1/2
1
150
150
19.65
9611( )01
1/2
9611( )02
1
300
150
51.02
1/2
1
6007
150
102.04
9611( )03
3/4
9611( )11
1
150
150
19.65
3/4
1
300
150
51.02
9611( )12
3/4
9611( )13
1
600
150
102.04
9611( )21
1
1
150
150
19.65
9611( )22
1
1
300
150
51.02
19.65
19.65
19.65
19.65
19.65
19.65
19.65
19.65
111
111
111
111
111
111
117
117
108
108
108
108
108
108
108
108
335
335
335
335
335
335
341
341
6
7
7
6
7
7
7
7
19.65
117
108
341
27.583
27.583
27.583
27.583
152
159
159
159
127
127
127
146
398
405
405
405
12
13
14
13
344.74
27.583
159
146
405
16
Style 972 Series 900 with No. 7 Orifice [126.4 sq. mm]
150
150
19.65
9721( )31
1
11/2
9721( )32
1
11/2
300
150
51.02
600
150
102.04
9721( )33
1
11/2
3
9721( )34
1
11/2
1500
172.36
11/2
150
150
19.65
9721( )41
11/2
9721( )42
11/2
11/2
300
150
51.02
11/2
600
150
102.04
9721( )43
11/2
3
9721( )44
11/2
11/2
1500
172.36
19.65
19.65
19.65
27.583
19.65
19.65
19.65
27.583
130
130
130
152
140
140
140
152
127
127
127
146
127
127
127
146
376
376
376
398
386
386
386
398
11
11
11
15
12
13
13
17
Style 981 Series 900 with No. 8 Orifice [198.0 sq. mm]
2
150
150
19.65
9811( )51
11/2
9811( )52
11/2
2
300
150
51.02
2
600
150
102.04
9811( )53
11/2
9811( )61
2
2
150
150
19.65
9811( )62
2
2
300
150
51.02
9811( )63
2
2
600
150
102.04
19.65
19.65
19.65
19.65
19.65
19.65
165
165
165
171
171
171
152
152
152
152
152
152
468
468
468
475
475
475
20
21
21
21
22
22
Style 991 Series 900 with No. 9 Orifice [324.5 sq. mm]
21/2
150
150
19.65
9911( )71
11/2
9911( )72
11/2
21/2
300
150
51.02
19.65
19.65
165
165
165
165
468
468
21
23
19.65
165
165
468
23
9511( )23
9611( )23
Notes:
1. Maximum set pressures shown are based
on carbon steel flanges. Pressure limits for
316 SS flanges may be lower. Contact your
sales representative.
2. Maximum set pressures apply to metal
seated valves only; refer to page 9 for limits
for soft seat construction.
3. ANSI CL 300 supplied; however, the
maximum back pressure is 27.58 barg.
4. Flanges are supplied with a serrated face
per ANSI B16.5. Other facings/standards
(i.e., DIN) are also available.
5. Dimension C shown is for Type A cap.
For Type B cap, add 6 mm to C dimension
(an additional 51 mm is required for test rod
head clearance).
For Type D cap, add 16 mm to C
dimension.
For Type E cap, add 22 mm to C dimension
(an additional 51 mm is required for test rod
head clearance).
6. Maximum set pressure for steam service is
68.95 barg.
7. ANSI CI 600 flange integral with base.
1/2
1
1
1
1
1
1
1
1
9511( )01
9511( )02
9511( )03
9511( )11
9511( )12
9511( )13
9511( )21
9511( )22
1/2
1/2
3/4
3/4
3/4
600
150
102.04
Style 965 Series 900 with No. 6 Orifice [70.96 sq. mm]
3/4
3
1
1500
255.45
9651( )14
3
9651( )24
1
1
1500
255.45
3
344.74
9651( )25
1
1
2500
3
9651( )34
1
11/2
1500
255.45
9651( )35
9911( )73
11/2
11/2
21/2
2500
600
150
102.04
CROMC-0294
17
Air Capacities Series 800* and Series 900 Valves, USCS (U.S. Customary System) Units
Note: For air capacities, USCS Units are exact equivalents of Imperial Units.
29.3
31.0
32.5
33.9
35.3
36.6
43.2
49.9
63.1
77.7
92.2
106
121
135
150
165
194
223
252
281
310
339
368
398
427
456
485
514
543
572
601
631
660
689
718
747
776
805
834
863
893
922
951
980
1009
1038
1067
1096
82.2
86.2
89.9
93.6
97.1
114
132
167
205
244
282
321
360
398
437
514
591
668
745
822
900
977
1054
1131
1208
1285
1362
1439
1517
1594
1671
1748
1825
1902
1979
2057
2134
2211
2288
2365
2442
2519
2596
2674
2751
2828
2905
135
140
146
152
179
207
261
322
382
443
503
563
624
684
805
926
1047
1168
1288
1409
1530
1651
1772
1892
2013
2134
2255
2376
2497
2617
2738
2859
2980
3101
3221
3342
3463
3584
3705
3826
3946
4067
4188
4309
4430
4550
0.503
9.8
49.4
221
230
240
249
294
339
429
528
627
726
825
924
1023
1122
1319
1517
1715
1913
2111
2309
2507
2705
2903
3101
3299
3497
3695
3893
4091
4289
4487
4685
4883
5081
5278
5476
5674
5872
6070
6268
6466
6664
6862
7060
7258
7456
Set Pressure
(psig)
0.074
1 psi incr.
1.4
5 psi incr.
7.2
760
780
800
820
840
860
880
900
920
940
960
980
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4200
4400
4600
4800
5000
1126
1155
1184
1213
1242
1271
1300
1329
1359
1388
1417
1446
1475
1621
1766
1912
2057
2203
2349
2494
2640
2786
2931
3077
3222
3368
3514
3659
3805
3950
4096
4242
4387
4533
4678
4824
4970
5115
5261
5406
5552
5698
5843
6135
6426
6717
7008
7299
2982
3059
3136
3214
3291
3368
3445
3522
3599
3676
3753
3831
3908
4293
4679
5065
5450
5836
6222
6607
6993
7379
7764
8150
8536
8921
9307
9693
4671
4792
4913
5034
5155
5275
5396
5517
5638
5759
5879
6000
6121
6725
7329
7933
8537
9141
0.503
9.8
49.4
7654
7852
8050
8248
8446
8644
8842
9039
9237
9435
9633
9831
10029
11019
12009
12998
13988
14978
Notes:
1. Not valid below 30 psig set pressure.
2. Capacities below 30 psig set pressure are
calculated at 3 psi overpressure.
3. To determine capacities on gases other than
air or vapors, for fluid temperatures other
than 60F, or if back pressure is specified,
use the gas and vapor sizing formula in the
Crosby Engineering Handbook.
CROMC-0294
18
Saturated Steam Capacities Unfired Pressure Vessel Service Series 800* and Series 900 Valves,
USCS (U.S. Customary System) Units
Note: For steam capacities, USCS Units are exact equivalents of Imperial Units.
82.3
122
87.1
129
230
91.4
135
242
95.3
141
252
99.2
395
0.503
27.7
138
Set Pressure
(psig)
0.074
1 psi incr.
4.0
5 psi incr.
20.4
0.503
27.7
138
360
1526
2268
4041
6331
10373
370
1566
2329
4150
6500
10650
380
1607
2389
4258
6670
10928
647
390
1648
2450
4366
6839
11206
400
410
1689
1730
2511
2572
4474
4583
7009
7178
11484
11762
147
262
411
674
10
15
102
121
152
180
272
321
427
504
699
825
420
1771
2632
4691
7348
12039
20
140
208
371
581
952
430
1812
2693
4799
7518
12317
30
177
263
469
735
1204
440
1853
2754
4908
7687
12595
40
218
324
577
904
1482
50
60
258
299
384
445
685
794
1074
1244
1760
2038
450
460
1893
1934
2815
2876
5016
5124
7857
8026
12873
13151
470
1975
2936
5232
8196
13429
70
340
506
902
1413
2316
480
2016
2997
5341
8365
13706
80
381
567
1010
1583
2593
490
2057
3058
5449
8535
13984
90
422
628
1118
1752
2871
100
110
463
504
688
749
1227
1335
1922
2091
3149
3427
500
520
2098
2180
3119
3240
5557
5774
8704
9044
14262
14818
540
2261
3362
5990
9383
15373
120
545
810
1443
2261
3705
560
2343
3483
6207
9722
15929
130
585
871
1552
2430
3983
580
2425
3605
6423
10061
16485
140
626
931
1660
2600
4260
150
160
667
708
992
1053
1768
1876
2770
2939
4538
4816
600
620
2506
2588
3726
3848
6640
6856
10400
10739
17040
17596
640
2670
3969
7073
11078
18152
170
749
1114
1985
3109
5094
660
2752
4091
7289
11418
18707
180
790
1174
2093
3278
5372
680
2833
4212
7506
11757
19263
190
831
1235
2201
3448
5649
200
210
872
912
1296
1357
2309
2418
3617
3787
5927
6205
700
720
2915
2997
4334
4455
7722
7939
12096
12435
19819
20374
740
3079
4577
8155
12774
20930
220
953
1417
2526
3957
6483
760
3160
4698
8372
13113
21486
230
994
1478
2634
4126
6761
780
3242
4820
8588
13452
22041
240
1035
1539
2742
4296
7039
250
260
1076
1117
1600
1660
2851
2959
4465
4635
7316
7594
800
820
3324
3406
4941
5063
8805
9021
13792
14131
22597
23152
840
3487
5184
9238
14470
23708
270
1158
1721
3067
4804
7872
860
3569
5306
9454
14809
24264
280
1199
1782
3175
4974
8150
880
3651
5427
9671
15148
24819
290
1239
1843
3284
5144
8428
300
310
1280
1321
1903
1964
3392
3500
5313
5483
8706
8983
900
920
3733
3814
5549
5670
9887
10104
15487
15826
25375
25931
940
3896
5792
10320
16165
26486
320
1362
2025
3608
5652
9261
960
3978
5913
10537
16505
27042
330
1403
2086
3717
5822
9539
980
4060
6035
10753
16844
27598
340
1444
2146
3825
5991
9817
1000
4141
6156
10970
17183
28153
350
1485
2207
3933
6161
10095
Notes:
1. Not valid below 30 psig set pressure.
2. Capacities below 30 psig set pressure are
calculated at 3 psi overpressure.
3. Maximum set pressure for steam service is
1000 psig.
CROMC-0294
19
Water Capacities Series 900 OMNI-TRIM Valves, USCS (U.S. Customary System) Units
Note: USCS Units for water and liquids are U.S. gallons per minute (1 U.S. gallon equals .833 Imperial gallon).
0.110
5
10
15
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
760
780
800
820
840
860
880
900
4.6
6.5
8.0
9.3
13.1
16.1
18.6
20.8
22.8
24.6
26.3
27.9
29.4
30.8
32.2
33.5
34.8
36.0
37.2
38.3
39.5
40.5
41.6
42.6
43.6
44.6
45.6
46.5
47.4
48.3
49.2
50.1
51.0
51.8
52.6
53.4
54.3
55.0
55.8
56.6
57.4
58.1
58.8
59.6
60.3
61.0
61.7
62.4
6.9
9.7
11.9
13.8
19.5
23.9
27.6
30.9
33.9
36.6
39.1
41.5
43.7
45.9
47.9
49.9
51.7
53.6
55.3
57.0
58.7
60.3
61.9
63.4
64.9
66.3
67.8
69.2
70.5
71.9
73.2
74.5
75.8
77.0
78.3
79.5
80.7
81.8
83.0
84.2
85.3
86.4
87.5
88.6
89.7
90.7
91.8
92.8
0.196
0.307
17.4
21.3
24.6
34.8
42.7
49.3
55.1
60.4
65.2
69.7
73.9
78.0
81.8
85.4
88.9
92.2
95.5
98.6
101
104
107
110
113
115
118
120
123
125
128
130
132
135
137
139
141
143
145
147
150
152
154
156
157
159
161
163
165
33.4
38.6
54.6
66.9
77.2
86.3
94.6
102
109
115
122
128
133
139
144
149
154
159
163
168
172
177
181
185
189
193
196
200
204
208
211
215
218
221
225
228
231
235
238
241
244
247
250
253
256
259
920
63.1
93.8
167
262
0.503
Diff.
Pressure
P1
(psi)
0.110
0.196
54.8
63.3
89.5
109
126
141
155
167
179
189
200
209
219
228
236
245
253
260
268
275
283
290
296
303
310
316
322
328
334
340
346
352
358
363
369
374
379
385
390
395
400
405
410
415
419
424
940
960
980
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
63.8
64.5
65.1
65.8
69.0
72.1
75.0
77.9
80.6
83.2
85.8
88.3
90.7
93.1
95.4
97.6
99.8
102
104
106
108
110
112
114
115
117
119
121
123
124
126
128
130
131
133
134
136
138
139
141
142
144
145
147
148
150
151
153
94.9
95.9
96.9
97.8
102
107
111
115
119
123
127
131
134
138
141
145
148
151
154
157
160
163
166
169
172
175
177
180
183
185
188
190
193
195
198
200
202
205
207
209
212
214
216
218
221
223
225
227
169
170
172
174
182
191
198
206
213
220
227
234
240
246
252
258
264
270
275
281
286
429
5500
154
229
0.307
264
267
270
273
286
299
311
323
334
345
0.503
433
438
443
447
469
490
510
529
548
566
Notes:
1. Differential Pressure ( P) equals inlet
pressure (set pressure plus overpressure)
at flowing conditions minus back
pressure.
2. See pages 12 and 13 for Minimum and
Maximum Set Pressure Limits.
CROMC-0294
20
Air Capacities Series 800* and Series 900 Valves, Metric Units
47.7
0.5
2.9
Set Press.
[kPag]
100 kPa incr.
500 kPa incr.
Set Press.
[barg]
1 bar incr.
5 bar incr.
47.7
0.5
2.9
Set Press.
[kPag]
100 kPa incr.
500 kPa incr.
0.35
0.8
1.2
35
68
41.1
61.2
109
170
279
6800
0.40
0.8
1.2
2.3
40
70
42.3
63.0
112
175
288
7000
0.45
0.50
0.9
0.9
1.3
1.3
2.3
2.4
76
45.9
68.3
121
190
312
7600
3.8
6.3
45
50
82
49.5
73.6
131
205
336
8200
0.55
0.9
1.4
2.5
3.9
6.5
55
88
53.1
78.9
140
220
361
8800
0.60
0.9
1.4
2.6
4.0
6.7
60
94
56.7
84.3
150
235
385
9400
0.65
1.0
1.5
2.6
4.2
6.9
65
1.5
1.5
2.7
2.8
4.3
4.4
7.0
7.2
70
75
89.6
94.9
159
169
409
1.0
1.0
60.3
63.8
250
0.70
0.75
100
106
10000
10600
112
67.4
100
178
11200
0.80
1.0
1.6
2.9
4.5
7.4
80
118
71.0
105
188
11800
0.85
1.1
1.6
2.9
4.6
7.6
85
124
74.6
110
197
12400
0.90
1.1
1.7
3.0
4.7
7.8
90
0.95
1
1.1
1.2
1.7
1.7
3.1
3.1
4.8
5.0
8.0
8.1
95
100
130
136
78.2
81.8
116
121
207
216
13000
13600
142
85.4
126
226
14200
1.7
2.6
4.6
7.2
11.8
200
148
88.9
132
235
14800
2.9
4.3
7.7
12.2
19.9
400
154
92.5
137
245
15400
4.1
6.1
10.9
17.1
28.1
600
8
10
5.3
6.5
7.9
9.7
14.1
17.2
22.1
27.0
36.2
44.3
800
1000
160
166
96.1
99.7
142
148
254
264
16000
16600
172
103
153
273
17200
12
7.7
11.4
20.4
32.0
52.4
1200
178
106
158
17800
14
8.9
13.2
23.6
36.9
60.6
1400
184
110
164
18400
16
10.1
15.0
26.7
41.9
68.7
1600
18
20
11.3
12.5
16.8
18.5
29.9
33.1
46.9
51.8
76.8
84.9
1800
2000
190
196
114
117
169
174
19000
19600
202
121
180
20200
22
13.6
20.3
36.2
56.8
93.1
2200
208
124
185
20800
24
14.8
22.1
39.4
61.7
101
2400
214
128
190
21400
26
16.0
23.9
42.6
66.7
109
2600
28
30
17.2
18.4
25.6
27.4
45.7
48.9
71.7
76.6
117
125
2800
3000
220
226
132
135
196
201
22000
22600
232
139
206
23200
32
19.6
29.2
52.1
81.6
133
3200
238
142
212
23800
34
20.8
31.0
55.2
86.5
141
3400
244
146
217
24400
36
22.0
32.7
58.4
91.5
149
3600
38
40
23.2
24.4
34.5
36.3
61.6
64.7
96.4
101
158
166
3800
4000
250
256
149
153
222
228
25000
25600
262
157
233
26200
42
25.6
38.1
67.9
106
174
4200
268
160
238
26800
44
26.8
39.9
71.1
111
182
4400
274
164
244
27400
46
28.0
41.6
74.2
116
190
4600
48
50
29.2
30.4
43.4
45.2
77.4
80.6
121
126
198
206
4800
5000
280
286
167
171
249
254
28000
28600
292
175
260
29200
52
31.6
47.0
83.7
131
214
5200
298
178
265
29800
54
32.8
48.7
86.9
136
223
5400
304
182
270
30400
56
34.0
50.5
90.0
141
231
5600
58
60
35.2
36.4
52.3
54.1
93.2
96.4
146
151
239
247
5800
6000
310
316
185
189
276
281
31000
31600
322
192
286
32200
62
37.6
55.8
99.5
155
255
6200
328
196
292
32800
64
38.7
57.6
102
160
263
6400
334
200
297
33400
66
39.9
59.4
105
165
271
6600
338
202
301
33800
Notes:
1. Not valid below 2.0 barg set pressure.
2. Capacities below 2.0 barg set pressure are
calculated at 0.2 bar overpressure.
3. To determine capacities on gases other than
air or vapors, for fluid temperatures other
than 16C, or if back pressure is specified,
use the gas and vapor sizing formula in the
Crosby Engineering Handbook.
CROMC-0294
21
Saturated Steam Capacities Unfired Pressure Vessel Service Series 800* and Series 900 Valves,
Metric Units
Saturated Steam Capacities Set Pressures 0.35 - 68 barg
Set Pressure
[barg]
47.7
0.1 bar incr.1 2.6
0.5 bar incr. 13.4
Set Pressure
[kPag]
10 kPa incr.
50 kPa incr.
Set Pressure
[barg]
0.1 bar incr.
0.5 bar incr.
47.7
2.6
13.4
Set Pressure
[kPag]
10 kPa incr.
50 kPa incr.
0.35
37.5
55.8
35
24.0
670
996
1774
2780
4554
2400
0.40
39.1
58.1
103
40
25.0
696
1036
1846
2891
4737
2500
0.45
0.50
40.5
41.8
60.2
62.2
107
110
26.0
723
1076
1917
3003
4920
2600
173
284
45
50
27.0
750
1115
1988
3114
5103
2700
0.55
43.1
64.2
114
179
293
55
28.0
777
1155
2059
3226
5285
2800
0.60
44.4
66.0
117
184
302
60
0.65
45.7
67.9
121
189
310
65
29.0
30.0
804
831
1195
1235
2130
2202
3337
3449
5468
5651
2900
3000
0.70
0.75
46.9
48.1
69.7
71.5
124
127
194
199
319
327
70
75
31.0
858
1275
2273
3560
5834
3100
32.0
885
1315
2344
3672
6017
3200
0.80
49.3
73.4
130
204
335
80
33.0
912
1355
2415
3783
6199
3300
0.85
50.6
75.2
134
209
344
85
0.90
51.8
77.0
137
215
352
90
34.0
35.0
938
965
1395
1435
2487
2558
3895
4007
6382
6565
3400
3500
0.95
1.0
53.0
54.2
78.8
80.6
140
143
220
225
360
368
95
100
36.0
992
1475
2629
4118
6748
3600
37.0
1019
1515
2700
4230
6930
3700
1.5
66.4
98
176
275
452
150
38.0
1046
1555
2771
4341
7113
3800
2.0
78
116
208
325
533
200
3.0
105
156
279
437
716
300
39.0
40.0
1073
1100
1595
1635
2843
2914
4453
4564
7296
7479
3900
4000
4.0
5.0
132
159
196
236
350
421
548
660
899
1082
400
500
41.0
1127
1675
2985
4676
7661
4100
42.0
1154
1715
3056
4787
7844
4200
6.0
186
276
492
772
1265
600
43.0
1180
1755
3127
4899
8027
4300
7.0
212
316
564
883
1447
700
8.0
239
356
635
995
1630
800
44.0
45.0
1207
1234
1795
1835
3199
3270
5011
5122
8210
8392
4400
4500
9.0
10.0
266
293
396
436
706
777
1106
1218
1813
1996
900
1000
46.0
1261
1875
3341
5234
8575
4600
47.0
1288
1915
3412
5345
8758
4700
11.0
320
476
849
1329
2178
1100
48.0
1315
1955
3484
5457
8941
4800
12.0
347
516
920
1441
2361
1200
13.0
374
556
991
1552
2544
1300
49.0
50.0
1342
1369
1995
2035
3555
3626
5568
5680
9124
9306
4900
5000
14.0
15.0
401
428
596
636
1062
1133
1664
1776
2727
2909
1400
1500
52.0
1422
2115
3768
5903
9672
5200
54.0
1476
2195
3911
6126
10037
5400
16.0
454
676
1205
1887
3092
1600
56.0
1530
2275
4053
6349
10403
5600
17.0
481
716
1276
1999
3275
1700
18.0
508
756
1347
2110
3458
1800
58.0
60.0
1584
1638
2355
2434
4196
4338
6572
6795
10768
11134
5800
6000
19.0
20.0
535
562
796
836
1418
1489
2222
2333
3641
3823
1900
2000
62.0
1691
2514
4481
7018
11500
6200
64.0
1745
2594
4623
7242
11865
6400
21.0
589
876
1561
2445
4006
2100
66.0
1799
2674
4766
7465
12231
6600
22.0
616
916
1632
2556
4189
2200
68.0
1853
2754
4908
7688
12596
6800
23.0
643
956
1703
2668
4372
2300
Notes:
1. Not valid below 2.0 barg set pressure.
2. Capacities below 2.0 barg set pressure are
calculated at 0.2 bar overpressure.
3. Maximum set pressure for steam service is
68.95 barg.
CROMC-0294
22
70.1
126
198
325
18.9
23.2
26.8
30.0
42.4
60.0
73.5
84.9
94.9
103.9
112.3
120.0
127.3
134.2
140
147
153
158
164
169
175
180
185
189
194
199
203
207
212
216
220
224
228
232
236
240
243
247
251
261
271
281
291
300
309
317
28.2
34.5
39.9
44.6
63.1
89.2
109
126
141
154
166
178
189
199
209
218
227
236
244
252
260
267
275
282
289
295
302
309
315
321
327
333
339
345
351
356
362
367
373
389
404
418
432
446
459
472
50.2
61.5
71.1
79.5
112
159
194
224
251
275
297
318
337
355
372
389
405
420
435
449
463
477
490
502
515
527
539
550
562
573
584
595
605
615
626
636
645
655
665
693
719
745
770
795
818
841
96.4
111
124
176
249
305
352
393
431
465
498
528
556
584
610
635
659
682
704
726
747
767
787
807
826
844
862
880
898
915
931
948
964
980
996
1011
1026
1041
1085
1127
1168
1207
1245
1282
1318
158
182
204
288
408
499
577
645
706
763
816
865
912
957
999
1040
1079
1117
1154
189
1224
1257
1290
1322
1353
1383
1413
1442
1471
1499
1526
1553
1580
1606
1632
1657
1682
1707
1778
1847
1914
1978
2040
2100
2159
Diff.
Pressure
P1
[kPa]
40
60
80
100
200
400
600
800
1000
1200
1400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
4600
4800
5000
5200
5400
5600
5800
6000
6200
6400
6600
6800
7000
7600
8200
8800
9400
10000
10600
11200
Diff.
Pressure
P1
[bar]
70.1
118
124
130
136
142
148
154
160
166
172
178
184
190
196
202
208
214
220
226
232
238
244
250
256
262
268
274
280
286
292
298
304
310
316
322
328
334
340
346
352
358
364
370
376
326
334
342
350
357
365
372
379
386
393
400
407
413
420
426
432
439
445
451
457
463
468
474
480
485
491
496
502
507
512
518
523
528
533
538
543
548
553
558
563
567
572
577
582
484
496
508
520
531
542
553
564
574
585
595
605
615
624
634
643
652
661
670
679
688
697
705
713
722
730
738
746
754
762
770
778
785
793
800
808
815
822
830
837
844
851
858
865
380
585
869
Notes:
1. Differential Pressure (P) equals inlet
pressure (set pressure plus overpressure)
at flowing conditions minus back
pressure.
2. See pages 14 and 15 for Minimum and
Maximum Set Pressure Limits.
3. To determine capacities on liquids other than
water or for fluid temperatures other than
21C, use the liquid sizing formula in the
Crosby Engineering Handbook .
126
863
885
906
927
947
967
986
1005
1024
1042
1060
1078
198
325
1352
1386
2216
2272
Diff.
Pressure
P1
[kPa]
11800
12400
13000
13600
14200
14800
15400
16000
16600
17200
17800
18400
19000
19600
20200
20800
21400
22000
22600
23200
23800
24400
25000
25600
26200
26800
27400
28000
28600
29200
29800
30400
31000
31600
32200
32800
33400
34000
34600
35200
35800
36400
37000
37600
38000
CROMC-0294
23
Standard Threaded
MNPT x FNPT1
Series 900
Threaded
FNPT x FNPT1
Standard Threaded
MNPT x FNPT3
Threaded
FNPT x FNPT3
FNPT inlet not available
in No. 5 orifice.
Flange x Flange2
Flanged connections available
in Nos. 6 and 7 orifices only.
Flange x Flange4
Notes:
1. Dimensions, weights, and pressure/ temperature ratings are found on pages 10 and 12.
2. Dimensions, weights, and pressure/ temperature ratings are found on pages 11 and 13.
3. Dimensions, weights, and pressure/ temperature ratings are found on pages 14 and 16.
4. Dimensions, weights, and pressure/ temperature ratings are found on pages 15 and 17.
5. Contact your sales representative for dimensions, weights, and pressure/temperature ratings.
Bolted Cylinder
MNPT x FNPT3
Available in No. 5 orifice only.
Tyco Flow Control (TFC) provides the information herein in good faith but makes no representation as to its comprehensiveness or accuracy. This data sheet is intended only as a guide to TFC products and services.
Individuals using this data sheet must exercise their independent judgment in evaluating product selection and determining product appropriateness for their particular purpose and system requirements. TFC MAKES NO
REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO
THE INFORMATION SET FORTH HEREIN OR THE PRODUCT(S) TO WHICH THE INFORMATION REFERS. ACCORDINGLY, TFC WILL NOT BE RESPONSIBLE FOR DAMAGES (OF ANY KIND OR NATURE, INCLUDING
INCIDENTAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES) RESULTING FROM THE USE OF OR RELIANCE UPON THIS INFORMATION. Patents and Patents Pending in the U.S. and foreign countries. Tyco
reserves the right to change product designs and specifications without notice. All registered trademarks are the property of their respective owners. Printed in the USA.
CROMC-0294
24
www.tycoflowcontrol.com