Академический Документы
Профессиональный Документы
Культура Документы
A few things to keep in mind while completing this activity: 1. Do not use the browser Back button or close or reload any exam windows during the exam. 2. Do not close Packet Tracer when you are done. It will close automatically. 3. Click the Submit Assessment button to submit your work.
Introduction
In this practice Packet Tracer Practice Skills Based Assement, you will: configure VLANs using VTP configure inter-VLAN routing modify STP configure port security add a wireless LAN
Addressing Table
Device Interface Fa0/0.40 Fa0/0.50 Branch Fa0/0.55 Fa0/0.80 Internet WLAN Wireless S1 S2 S3 Staff 1 Staff 2 Admin WRS PC VLAN 55 VLAN 55 VLAN 55 NIC NIC NIC NIC 10.10.100.1 10.10.55.11 10.10.55.12 10.10.55.13 10.10.40.10 10.10.40.11 10.10.50.10 DHCP assigned 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 n/a 10.10.55.1 10.10.55.1 10.10.55.1 10.10.40.1 10.10.40.1 10.10.50.1 10.10.100.1 10.10.55.1 10.10.80.1 10.10.80.10 255.255.255.0 255.255.255.0 255.255.255.0 n/a n/a 10.10.80.1 Address 10.10.40.1 10.10.50.1 Subnet Mask 255.255.255.0 255.255.255.0 Default Gateway n/a n/a
Note: The password for user EXEC mode is cisco. The password for privileged EXEC mode is class.
For interfaces FastEthernet 0/19 through FastEthernet 0/24 on all three switches: Configure static trunking. Assign VLAN 55 as the native VLAN.
b. Create and name the following VLANs on S1. VLAN 40: Staff VLAN 50: Admin VLAN 55: Management VLAN 80: Wireless
c. Configure S2 and S3 as VTP clients to participate in the BRANCH VTP domain. d. Verify that VTP is operational.
a. Configure access ports on access layer switches. Configure the appropriate interfaces on S2 and S3 for access mode. Assign VLANs according to the port assignments table.
b. Configure wireless security. Set the SSID to Branch_WLAN. Enable WEP security and use 0123456789 as key1.
c. Use branch123 as the remote management password. d. Configure WRS PC to access the wireless network that is provided by WLAN. WRS PC uses DHCP to obtain addressing information. Note: It will not be possible for devices to ping WRS PC since WRS PC is behind the WLAN NAT firewall.
Step 2: Configure Trunking. SW1 SW2 SW3 inter range fa0/19-24 sw mode trunk sw trunk native vlan 55
Step 3: Configure VTP and VLANs. SW1 vtp mode server vtp domain BRANCH vtp password vtpbranch vlan 40 name Staff vlan 50 name Admin vlan 55 name Management vlan 80 name Wireless
SW2 Y SW3 vtp mode client vtp domain BRANCH vtp password vtpbranch
Step 4: Configure Interfaces for VLAN Access SW2 Y SW3 inter range fa0/1-10 sw mode access sw access vlan 40 inter range fa0/11-17 sw mode access sw access vlan 50
Step 5: Configure Spanning Tree. SW1 spanning-tree vlan 1 priority 12288 spanning-tree vlan 40 priority 12288 spanning-tree vlan 50 priority 12288 spanning-tree vlan 55 priority 12288 spanning-tree vlan 80 priority 12288
SW2 spanning-tree vlan 1 priority 16384 spanning-tree vlan 40 priority 16384 spanning-tree vlan 50 priority 16384 spanning-tree vlan 55 priority 16384 spanning-tree vlan 80 priority 16384
inter fa0/0.40 encapsulation dot1q 40 ip add 10.10.40.1 255.255.255.0 inter fa0/0.50 encapsulation dot1q 50 ip add 10.10.50.1 255.255.255.0 inter fa0/0.55 encapsulation dot1q 55 native ip add 10.10.55.1 255.255.255.0 inter fa0/0.80 encapsulation dot1q 80 ip add 10.10.80.1 255.255.255.0
Step 7: Configure Port Security. SW3 switchport mode access switchport port-security switchport port-security maximum 2 switchport port-security mac-address sticky
Step 8: Configure the Wireless LAN. INALAMBRICO (en las fotos de yapa)
VLAN DE ADMINISTRACION DE LOS SW. SW1 inter vlan 55 ip add address 10.10.55.11 255.255.255.0 exit ip default-gateway 10.10.55.1
SW2 inter vlan 55 ip add address 10.10.55.12 255.255.255.0 exit ip default-gateway 10.10.55.1 SW3 inter vlan 55 ip add address 10.10.55.13 255.255.255.0 exit ip default-gateway 10.10.55.1
RESULTADO