Академический Документы
Профессиональный Документы
Культура Документы
The ASCO pressure vessels are designed and built per section VIII Division 1 of the A.S.M.E. code (U1-A certificate supplied), maximum allowable working pressure is 350 psi (24.1 bar). Vessels are saddle mounted to an I-beam frame. Capacities given is based on a 93 % full volume. Vessels are primed and insulated with 100 mm urethane foam and covered with a prepainted white aluminium jacket with aluminium heads. All joints are overlapped and sealed with silicone sealant. Safeties are sized per the recommendations of the Compressed Gas Association (CGA). Systems have dual safeties mounted in a 3-way switching valve and a single bleeder mounted in an insulation valve. Shut off valves are ball type stainless steel. Refrigeration systems are semi hermetic utilizing environmentally friendly R-404A (other types on request) refrigerant. Electrical systems consist of a Cutler Hammer control panel, magnetic starter, control voltage transformer, wired for automatic operation. The refrigeration system and front end piping are covered with an enclosure consisting of an aluminium angle and aluminium square tube frame covered with prepainted white aluminium sheets. A lockable access door is provided. The tank content is shown by differential pressure indicator and pressure gauge with a diameter of 152 mm. The base frame is painted with a Glidden alkyd industrial enamel. The completed tank is tested with liquid carbon dioxide in the tank and all controls are set for proper automatic operation. Specifications Pressure vessel: Built per A.S.M.E. code, Sec. VIII, Div.1 350 PSI = 24.1 bar design pressure -40 C minimum design temperature Skid mounted Closed cell polyurethane foam, 100 mm thick 1.6 mm prefinished white aluminium jacket Ball type stainless steel A.S.M.E. approved Direct spring loaded, or pilot operated Bleeder for secondary protection According to customers requirements U.L. listed components All controls necessary for automatic operation ASCO reserves the right to modify all specifications without prior notice.
Electrical:
Standard tank capacity liquid CO2 in kg 3'170 5'440 8'280 9'326 12855 16300 23'600 29'400 30'800 36'300 45'400
A max. length mm 3'350 4'570 5'860 4'600 5'800 7'310 9'750 11'730 12'190 14'630 17'070
B max. width mm 1'880 1'880 1'880 2'280 2'280 2'280 2'280 2'280 2'280 2'280 2'280
C max. height mm 2'230 2'230 2'230 2'540 2'540 2'540 2'540 2'540 2'540 2'690 2'690
packing + shipment in container foot 20' 20' 20' 40' 40' 40' 40' 40' 45' flat bed ext. flat bed
approx. empty weight kg 3'400 3'650 5'900 6000 7'200 8'000 12'500 14'000 14'700 17'000 19'000
electrical supply
part no.
912030
Pos. 002
part no.
912031
Pos. 003
part no.
912032
part no.
912033
Pos. 005
part no.
912034
Pos. 006
part no.
912035
part no.
912036
Pos. 008
part no.
912037
Pos. 009
part no.
912038
part no.
912039
Pos. 011
part no.
912040