Академический Документы
Профессиональный Документы
Культура Документы
Appendix :B Contents
Overview..................................................................................................................... 2 What Is The ABAP List Viewer?...............................................................................2 ABAP List Viewer: Cost Versus Benefit Analysis...................................................3 Report Lists Without ABAP List Viewer .................................................................4 Report Lists With ABAP List Viewer .......................................................................5 Technical Notes....................................................................................................... 10 Sample Code Using ALV (Release 4.0B)...............................................................11 Review...................................................................................................................... 16 Where to Learn More...............................................................................................16
Overview
If it becomes necessary to write ABAP code to create your reports, then consider using the ABAP List Viewer (ALV) to simplify your development. Available in the R/3 System since Release 3.1, the ABAP List Viewer supports many of the standard R/3 reports. The ALV provides additional program code you can quickly add to any custom report for any SAP module. Many reports developed for Release 4.0 (and later) utilize the ABAP List Viewer. Additionally, many older standard R/3 reports (and reporting tools) have been modified to include the ABAP List Viewer. The ABAP List Viewer can be used with any application component or module in the R/3 System. We recommend that developers should adopt ABAP List Viewer as a design principle in all report development activities that occur in your organization. Note: At the time of press, limited technical support is available for the ABAP List Viewer. However, we believe that support limitations should not prevent you from taking advantage of the functionality offered by ALV.
SAP developed the ABAP List Viewer to help reduce the time and effort spent on some of the report development activities. By using the ALV in the programming of custom reports, you could reduce the development time by an estimated 40% (see table below). ABAP Report Development Activity With ALV Finding the right tables and table relationships that need to be included in order for the program to be written Preparing field catalog and sort sequence for ALV Providing fancy features, such as sorting, subtotals, and interactivity Enhancing the look of the report with column headings, vertical lines, and color Total Percentage of Time Taken to Complete 50%
1% 9% 0% 60%
Although, the use of ALV adds one more development activity (that is, preparation of the field catalog), the development time spent on other activities is either eliminated or vastly reduced.
A key point to note is that the function bar is blank. In addition, the data in the list is dead which means that data listed cannot be used for any further data retrieval. It is essentially a data-dump. Among other things, there are no headings for the columns. Any additional functionality would have to be programmed. In short, the interface between the data you see on the screen and the users eyes (the GUI) is limited and bland. Report users routinely ask for additional features in their reports. Often they are looking for the ability to:
Sort Resize rows Double-click on one information element to jump to another information element Perform basic calculations Download stylized spreadsheets Display several colors Visually separate various pieces of information on the screen However, for the most part, these features need to be programmed into the list as added functionality to the output of the report. While some of these added functions are relatively easy to program, the manner in which this added functionality works may vary greatly. For example, one programmer may decide to enable a single-click as sufficient user input to jump to a next level of information, while another programmer requires a double-click. Similarly, one programmer may set the output of a field at 10 characters long, but another programmer may program it as 20 characters.
Buttons that appear on the function bar (some of whose functions will be introduced in the pages that follow)
A feature-rich function bar gives the user commonly requested functionality Function bar is blank Column headings make data easier to understand
As you review the additional functionality shown above, remember that without the ALV each function would have to be programmed into the report. Note: This appendix introduces you to some of the functions that the ALV makes possible. However, this appendix does not cover the full breadth of ALV functionality. For more information, refer to the ALV documentation in the R/3 online documentation: R/3 Library CA-Cross-Application Components General Application Functions ABAP List Viewer
Guided Tour
This guided tour shows possible ways a user could interact with an ALV-enabled report list.
In an ALV-enabled report list, a user can select a particular column and execute a subsequent function, if desired. 1. Select the column for Sales doc. With ALVs added functionality the color of the selected column can be changed, making it easy for the report user to know which column has been selected. 2. Choose Filter. With the filter option, a user can call up a desired subset of information on the output list.
2 1
3. Set the filter for the sales documents to be viewed. In this instance, the user only wants to views sales documents that are between the numbers 1000 and 2000. 4. Choose Copy to invoke the ALV to filter the list.
5. The resulting filtered list is shown to the right. To return to the previous list, a user can simply click the arrow buttons without having to exit and reexecute the report. 6. If not all columns of the report are of interest to the user, the unwanted columns can be hidden. This can be accomplished by setting the current variant to include only the desired columns. To hide (or to view previously hidden columns), choose Display variant.
In the popup window, the columns that currently appear in the list are shown in the left section. Hidden fields (if any) appear on the right section. In this example, all fields appear. 7. To make one column disappear, select the row which lists the column you want to hide. In this example, we select Material Group. 8. Then, click the single rightarrow button to move the selected column (Material group) to the hidden fields section.
7 8
The Material Group is now one of the hidden fields. 9. For this change to take effect, choose Copy.
The new output list appears. The original list may be revisited by simply choosing the current variant.
Technical Notes
In order for the reports to provide the consistency, flexibility, and userfriendliness of the ALV, it is necessary to include certain statements in the reports program code. This section is intended for those who actually write the code for reports. To include the ALV in a report, the following basic steps must completed: 1. Declare data areas for List Viewer. 2. Declare the internal table to store selected data. 3. Select data into internal table. 4. Build the field catalogs. 5. Build event catalogs. 6. Start ABAP List Viewer using SAPs standard delivered function modules (see TechTalk below). 7. Process call back events. In the standard R/3 System, SAP delivers several function modules related to the ALV. Use the following function modules with Release 4.0: REUSE_ALV_LIST_DISPLAY (this is the primary function module) or other function modules that begin with the name REUSE_ALV*.
Review the sample program on page 11 which shows the coding related to each of steps listed above. Note: The source code that appears on page 11 was used to create the sample ALV-enabled report list presented in this appendix. You will find the source code (ZFIGALV.txt) on the companion CD supplied with this guidebook series.
10
*******Select Data into Internal Table (Begin) *************** SELECT VBELN POSNR MATNR MATKL KWMENG VRKME INTO CORRESPONDING FIELDS OF TABLE IVBAP FROM VBAP WHERE VBELN NE 0.
11
******* Select Data into Internal Table (End) **************** ******* Build Field Catalogs (Begin)************************** PERFORM PERFORM PERFORM PERFORM PERFORM BUILD_FIELDCAT. BUILD_FIELDCAT2. BUILD_FIELDCAT3. BUILD_SORTCAT. BUILD_SORTCAT2.
*******Build Field Catalogs (End)****************************** *******Build Event Catalog (Begin)***************************** PERFORM BUILD_EVENTCAT. *******Build Event Catalog (End)******************************* *******Start List Viewer (Begin)******************************* PERFORM START_LIST_VIEWER. *******Start List Viewer (End)********************************* *************************************************************** *************************************************************** *********FORM ROUTINES (Begin)********************************* FORM BUILD_FIELDCAT. ADD 1 TO COL_POS. FIELDCAT_LN-REF_TABNAME = 'VBAP'. FIELDCAT_LN-FIELDNAME = 'VBELN'. FIELDCAT_LN-KEY = 'X'. FIELDCAT_LN-DO_SUM = SPACE. FIELDCAT_LN-COL_POS = COL_POS. FIELDCAT_LN-NO_OUT = SPACE. FIELDCAT_LN-QFIELDNAME = SPACE. FIELDCAT_LN-HOTSPOT = 'X'. APPEND FIELDCAT_LN TO FIELDCAT. ENDFORM. FORM BUILD_FIELDCAT2. ADD 1 TO COL_POS. FIELDCAT_LN-REF_TABNAME = 'VBAP'. FIELDCAT_LN-FIELDNAME = 'MATNR'. FIELDCAT_LN-KEY = SPACE.
12
FIELDCAT_LN-DO_SUM = SPACE. FIELDCAT_LN-COL_POS = COL_POS. FIELDCAT_LN-NO_OUT = SPACE. FIELDCAT_LN-QFIELDNAME = SPACE. FIELDCAT_LN-HOTSPOT = SPACE. APPEND FIELDCAT_LN TO FIELDCAT. ENDFORM.
FORM BUILD_FIELDCAT3. ADD 1 TO COL_POS. FIELDCAT_LN-REF_TABNAME = 'VBAP'. FIELDCAT_LN-FIELDNAME = 'MATKL'. FIELDCAT_LN-KEY = SPACE. FIELDCAT_LN-DO_SUM = 'X'. FIELDCAT_LN-COL_POS = COL_POS. FIELDCAT_LN-NO_OUT = SPACE. FIELDCAT_LN-QFIELDNAME = SPACE. FIELDCAT_LN-HOTSPOT = SPACE. APPEND FIELDCAT_LN TO FIELDCAT. ENDFORM. FORM BUILD_SORTCAT. SORTCAT_LN-SPOS = '1'. SORTCAT_LN-FIELDNAME = 'MATNR'. SORTCAT_LN-UP = 'X'. SORTCAT_LN-DOWN = SPACE. SORTCAT_LN-SUBTOT = 'X'. APPEND SORTCAT_LN TO SORTCAT. ENDFORM. FORM BUILD_SORTCAT2. SORTCAT_LN-SPOS = '2'. SORTCAT_LN-FIELDNAME = 'VRKME'. SORTCAT_LN-UP = SPACE. SORTCAT_LN-DOWN = 'X'. SORTCAT_LN-SUBTOT = SPACE. APPEND SORTCAT_LN TO SORTCAT. ENDFORM. FORM BUILD_EVENTCAT. EVENTCAT_LN-NAME = 'TOP_OF_PAGE'. EVENTCAT_LN-FORM = 'PAGE_HEADER'. APPEND EVENTCAT_LN TO EVENTCAT.
13
ENDFORM. FORM START_LIST_VIEWER. DATA: PGM LIKE SY-REPID. PGM = SY-REPID. CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY' EXPORTING * I_INTERFACE_CHECK = ' ' I_CALLBACK_PROGRAM = PGM * i_callback_pf_status_set = ' ' I_CALLBACK_USER_COMMAND = 'USER_COMMAND' * I_STRUCTURE_NAME = * IS_LAYOUT = IT_FIELDCAT = FIELDCAT * IT_EXCLUDING = * IT_SPECIAL_GROUPS = IT_SORT = SORTCAT * IT_FILTER = * IS_SEL_HIDE = * I_DEFAULT = 'X' I_SAVE = 'A' * IS_VARIANT = ' ' * IT_EVENTS = * IT_EVENT_EXIT = * IS_PRINT = * I_SCREEN_START_COLUMN = 0 * I_SCREEN_START_LINE = 0 * I_SCREEN_END_COLUMN = 0 * I_SCREEN_END_LINE = 0 * IMPORTING * E_EXIT_CAUSED_BY_CALLER = * es_exit_caused_by_user = TABLES T_OUTTAB = IVBAP EXCEPTIONS PROGRAM_ERROR = 1 OTHERS = 2. ENDFORM. ********Process Call Back Events (Begin)*************************** FORM USER_COMMAND USING UCOMM LIKE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
14
READ TABLE IVBAP INDEX SELFIELD-TABINDEX. CHECK SY-SUBRC = 0. CASE UCOMM. WHEN '&IC1'. CASE SELFIELD-SEL_TAB_FIELD. WHEN 'IVBAP-VBELN'. SET PARAMETER ID 'AUN' FIELD IVBAP-VBELN. CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN. WHEN 'IVBAP-MATNR'. SET PARAMETER ID 'MAT' FIELD IVBAP-MATNR. CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN. ENDCASE. ENDCASE. ENDFORM. ********Process Call Back Events (End)****************************** ***********FORM ROUTINES (END)**************************************
15
Review
The ABAP List Viewer (ALV) functionality provided within ABAP can enhance reports in the R/3 System, and was first made available with Release 3.1. The ALV is a set of function modules added to program code. Programs created before this release can be enhanced with the ALV by adding links to the function modules. Using the ALV provides a uniform user-interface and list format for ABAP reports. This standardization helps eliminate redundant functions. Using the ALV enhances the functionality provided with reports while decreasing the development time by roughly 40%. The ALV provides the following features: Sorting Resizing of rows Double-clicking on one information element to jump to another information element Performing basic calculations Downloading of stylized spreadsheets Displaying several colors Visually separating various pieces of information on the screen To include the ALV in a report, the following basic steps must completed:
1. Declare data areas for List Viewer. 2. Declare the internal table to store selected data. 3. Select data into internal table. 4. Build field catalogs. 5. Build event catalogs. 6. Start the ABAP List Viewer using SAPs standard delivered function modules. 7. Process call back events.
16
17