Академический Документы
Профессиональный Документы
Культура Документы
ms_office1
RNC V200R009
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please c
http://www.huawei.com support@huawei.com
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Te
Notice
The information in this document is subject to change without notice. Every effort has been made in the preparation of this documen
8/7/2013
13267
162734118.xls.ms_office1
80
nical support and service. For any assistance, please contact our local office or company headquarters.
any means without prior written consent of Huawei Technologies Co., Ltd.
fort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this d
8/7/2013
23267
162734118.xls.ms_office1
s, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.
8/7/2013
33267
162734118.xls.ms_office1
Purpose
This describes RNC parameters, including the meaning, values, and usage of RNC parameters.
Version
The product version related to this document is: BSC6810 V200R011C00SPC180.
Intended Audience
Network planners Field engineers System engineers Shift operators
Organization
Each parameter is described in the following aspects. Description Parameter ID Parameter Name MML Command NE Meaning Value Type GUI Value Range Actual Value Range Unit Default Value Recommended Value Impact Parameter Relationship Service Interrupted After Modification Interruption Scope Interruption Duration (min) Caution Access
8/7/2013
43267
162734118.xls.ms_office1
Change History
This section provides information on the changes between BSC6810V200R011C00SPC100 and BSC68 Parameter Change
CIOOffset
CqiDtxTimer CQIFbCkinInDTXDRXmode DpcchBurst1 DpcchBurst2 DrxCycle DrxGrantMonitoring Drxvalid DtxCycle1 DtxCycle2 DtxLongPreamble InactThsForCycle2 InactThsForDrxCycle InactThsForGrantMonitoring MacDtxCycle MacInactiveThreshold
8/7/2013
53267
162734118.xls.ms_office1
CtrlPlnSharingOutThd
Change History
This section provides information on the changes between BSC6810V200R011C00SPC140 and BSC68 Parameter Change
QrxlevminExtSup
8/7/2013
63267
162734118.xls.ms_office1
cribed in the following aspects. Remarks Simple string for identifying a parameter Full name of the parameter Commands for setting the parameter, and optional/mandatory attribute of the parameter in each command NEs on which the parameter is set Functions, functioning ways, and protocols of the parameter Parameter value type Parameter value range displayed on the GUI Actual parameter value range corresponding to the GUI Value Range. For example, the GUI Value Range is 0, and the corresponding Actual Value Range is OFF. Parameter value unit Initial value provided by the system Values recommended in different scenarios Parameter impact scope, that is, objects specified when the parameter is set Relationship between this parameter and other parameters. For example, to use this parameter, you need to set related switches and parameters. Whether modifying the parameter value may interrupt the existing services Possible interruption scope in the case that modifying the parameter value may interrupt the existing services Possible interruption duration in the case that modifying the parameter value may interrupt the existing services Cautions to be taken during the modification Whether this parameter is read/write or read only
8/7/2013
73267
162734118.xls.ms_office1 Whether this parameter is a radio parameter, a transport parameter, or an equipment parameter Version in which this parameter is introduced
nformation on the changes between BSC6810V200R011C00SPC100 and BSC6810 V200R011C00SPC140. MML Command
SET DTXDRXPARA(Optional)
8/7/2013
83267
162734118.xls.ms_office1
SET CTRLPLNSHAREPARA(Optional)
nformation on the changes between BSC6810V200R011C00SPC140 and BSC6810 V200R011C00SPC180. MML Command
8/7/2013
93267
162734118.xls.ms_office1
8/7/2013
103267
162734118.xls.ms_office1
C6810 V200R011C00SPC140. Change Description The actual value range is changed. Before change: Actual Value Range: -20~20 After change: Actual Value Range: -10~10, step: 0.5 The parameter ID that is cited in the parameter relation is changed. Before change: This parameter is valid when [PARA]DtxInvalid[ /PARA] is set to ON. After change: This parameter is valid when [PARA]Dtxvalid[/P ARA] is set to
8/7/2013
113267
162734118.xls.ms_office1 The bearer of load sharing described in the meaning is changed. Before change: ...new arrival call attempts will be shared out to other CPU. After change: ...new arrival call attempts will be shared out to other SPU and none will be shared in this SPU.
C6810 V200R011C00SPC180. Change Description The series number of 3GPP protocol is changed. Before change: 3GPP TS 25.304 After change: 3GPP 25.331 10.3.2.3
8/7/2013
123267
162734118.xls.ms_office1
Description
The type of ADD R99, service carried by AAL2PATH(M Enumeratio HSPA, the AAL2 path andatory) n Type SHARE that users expect.
R99,HSPA, SHARE
AbsTime
This parameter specifies the time to execute re-host SET policy for the POOLPRIMHO Compound hour, min, Specify Time primary hosted STPOLICY(Ma Type sec NodeB, after the ndatory) RNC recovers from disaster and starts to operate. It defines the mapping of AC 0~9 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. It defines the mapping of AC 10 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. It defines the mapping of AC 11 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. It defines the mapping of AC 12 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011.
00:00:00~2 3:59:59
Ac09ToAsc
Interval Type
0~7
0~7
Ac10ToAsc
Interval Type
0~7
0~7
Ac11ToAsc
Interval Type
0~7
0~7
Ac12ToAsc
Interval Type
0~7
0~7
8/7/2013
133267
162734118.xls.ms_office1
It defines the mapping of AC 13 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. It defines the mapping of AC 14 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. It defines the mapping of AC 15 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011.
Ac13ToAsc
Interval Type
0~7
0~7
Ac14ToAsc
Interval Type
0~7
0~7
Ac15ToAsc
Interval Type
0~7
0~7
ADD Access service Identifying an AccessServic PRACHASC(M class ASC. eClass andatory)
ASC0, ASC1, ASC2, ASC3, Enumeratio ASC4, n Type ASC5, ASC6, ASC7
ASC0, ASC1, ASC2, ASC3, ASC4, ASC5, ASC6, ASC7 Disable (not support the address and control field compress function), Enable (support the address and control field compress function)
ACFC
This parameter specifies whether to enable the Disable, address and Enumeratio Enable control fields n Type compression switch.
8/7/2013
143267
162734118.xls.ms_office1
Interval of automatic access classes restriction between cells. When a subsystem of an RNC performs access classes restriction on cells managed by this subsystem, it selects the first cell at random. After waiting for the time specified SET in this parameter, Interval ACALGO(Man the subsystem Type datory) selects the second cell and the first cell is still with access classes restriction. The process lasts until all the cells are going through access classes restriction. For detailed information of this parameter, refer to 3GPP TS 22.011.
1~36000
10~360000, step:10
Specifies the interval between consecutive Access Class SET pollings imposed Restriction DSACAUTOA on the PS domain Interval AcIntervalOf interval LGO(Mandator and CS domain in Type Cells between Cells y) different cells according to the flexible polling restriction mode.
1~36000
1~36000
8/7/2013
153267
162734118.xls.ms_office1
AcRange
Specifies the restricted access class according to Bit Field the flexible Type polling restriction mode.
AC0(Acces s Class 0 Restriction), AC1(Acces s Class 1 Restriction), AC2(Acces s Class 2 Restriction), AC3(Acces s Class 3 Restriction), AC4(Acces s Class 4 Restriction), AC5(Acces s Class 5 Restriction), AC6(Acces s Class 6 Restriction), AC7(Acces s Class 7 Restriction), AC8(Acces s Class 8 Restriction), AC9(Acces s Class 9 Restriction), AC10(Acce
8/7/2013
163267
162734118.xls.ms_office1
Specifies the ADD access classes CELLDSACM that are restricted Bit Field ANUALPARA( according to the Type Mandatory) fixed restriction mode.
AC0(Acces s Class 0 Restriction), AC1(Acces s Class 1 Restriction), AC2(Acces s Class 2 Restriction), AC3(Acces s Class 3 Restriction), AC4(Acces s Class 4 Restriction), AC5(Acces s Class 5 Restriction), AC6(Acces s Class 6 Restriction), AC7(Acces s Class 7 Restriction), AC8(Acces s Class 8 Restriction), AC9(Acces s Class 9 Restriction), AC10(Acce
8/7/2013
173267
162734118.xls.ms_office1
SET DSACAUTOA LGO(Mandator Interval length y) of Domain SET AcRstrctInter Specific ACALGO(Man valLen Access Class datory) Restriction ADD CELLDSACM ANUALPARA( Mandatory)
Specifies the interval delay between consecutive Interval pollings Type according to the flexible polling restriction mode.
6~3600
6~3600
8/7/2013
183267
162734118.xls.ms_office1
Access restriction ratio. When a cell performs access classes restriction, you can select some access classes from AC0 to AC9 based on the ratio specified in this parameter and perform access classes restriction on the selected SET access classes. ACALGO(Man After access datory) classes restriction goes on for AcRstrctIntervalL en, the original access classes restriction is released and other access classes of the local cell are selected for access classes restriction based on the ratio specified in this parameter. OFF indicates that the AC algorithm is SET automatically ACALGO(Opti disabled. ON onal) indicates that the AC algorithm is automatically enabled.
Interval Type
1~10
0.1~1, step:0.1
OFF, ON
ACTTYPE
Type
GPS(Global Position This parameter System), ACT specifies the type DGPS(Diffe GPS(Mandatory of the GPS Enumeratio rential ) assistance data to n Type Global be activated. Position System), BOTH(both GPS and
GPS(Global Position System),DG PS(Differen tial Global Position System),BO TH(both GPS and DGPS)
8/7/2013
193267
162734118.xls.ms_office1
This parameter STR specifies the CPU CPUUSAGETS usage to be T(Mandatory) increased. The activity factor at the radio layer varies with the service priority. The configuration of SET the activity factor ADMCTRL(Ma is performed ndatory) based on the priorities of gold, silver, and copper. The activity factor of SRB is priority insensitive.
ACU
Interval Type
1~95
1 to 95
AFSetObj
AFSetObj
NOPRIORI TY(NOPRI ORITY), GOLD(GO Enumeratio LD), n Type SILVER(SI LVER), COPPER(C OPPER)
A-GPS ADD Flag of A-GPS AgpsActivate Method Active SMLCCELL(O location Flag Flag ptional) activation.
This parameter indicates whether the GPS A-GPS SET AGPSAddAs NODELIV NODELIV Additional Additional SMLC(Optional Enumeratio sDataSendFla ERY, ERY, Assistance Data Data Send Flag ) n Type g DELIVERY DELIVERY Request is sent when the A-GPS method is used. UE positioning UE_BASE UE_BASE mode when the AD, D, GPS method is UE_ASSIS UE_ASSIS SET selected. The UE TED, TED, SMLC(Optional supports both UE- Enumeratio UE_BASE UE_BASE ) based A-GPS n Type D_PREFER D_PREFER mode and UERED, RED, assisted A-GPS UE_ASSIS UE_ASSIS mode. TED_PREF TED_PREF ERRED ERRED ADD GPS(Mandatory ) ACT GPS(Mandatory )
Interval Type
0~65534
0 to 65534
8/7/2013
203267
162734118.xls.ms_office1
This parameter specifies the type RNC(Local of the GPS RNC), reference NODEB(Lo receiver. A GPS cal NodeB), ADD reference receiver NRNC_RN GPS(Mandatory Enumeratio can be configured C(Nearby ) n Type on the local RNC, RNC), a NodeB of the NRNC_NO local RNC, or a DEB(Node neighboring B in RNC) RNC.
RNC(Local RNC), NODEB(Lo cal NodeB), NRNC_RN C(Nearby RNC), NRNC_NO DEB(Node B in RNC)
8/7/2013
213267
162734118.xls.ms_office1
Difference between the transmit power of AICH and that of PCPICH. If the value is set too small, the UEs on the cell edge cannot receive the acquisition indication properly. This problem affects the coverage of ADD the downlink CHPWROFFSE common channel T(Optional) and furthermore the coverage of the cell. If the value is set too great, it causes interference to other channels, occupies the downlink transmit power, and affects the cell capacity. For details, refer to the 3GPP TS 25.433 protocol. Transmission timing information of an AICH. "0" indicates that there are 7680 chips offset between the access preamble ADD of the PRACH AICH(Optional) and AICH. "1" indicates that there are 12800 chips offset between them. For detailed information of this parameter, refer to 3GPP TS 25.211.
Interval Type
-22~5
-22~5
Interval Type
0~1
0~1
8/7/2013
223267
162734118.xls.ms_office1
SET ALMLVL(Man datory) SET BOXRPT(Mand atory) SET ALMPORT(Opt ional)
aid
Alarm ID
This parameter specifies the alarm ID of the alarm configuration record to be modified.
Interval Type
1~65535
1~65535
AlignMode
align type
This parameter specifies whether SET the configured HSHSSCCHLESS SCCH Less Enumeratio OPPARA(Mand Operation n Type atory) parameters adopt the octet_align or bit_align mode.
AllBw
Bandwidth
The unit is kbps. This parameter is valid only when ADD Transport Interval RSCGRP(Mand Resource Group Type atory) Type is IP and Bandwidth mode is HALF_DUPLEX.
0~4000000 0~4000000
8/7/2013
233267
162734118.xls.ms_office1
If Manual is chosen, allocating [Code Number for HS-PDSCH] the equal of configured HSPDSCH code number. If Automatic is chosen, allocating HS-PDSCH code number between configured HSPDSCH Maximum code ADD Manual(Ma Allocate Code number and HSManual, AllocCodeMo CELLHSDPA( Enumeratio nual), Mode PDSCH Automatic de Optional) n Type Automatic( Minimum code Automatic) number. At the early stage of network construction, or when the traffic model of subscribers in a cell is not fixed, the parameter can be set to Automatic to have the HSDPA channel codes be automatically
ALTITUDE
This parameter specifies the ADD antenna altitude GPS(Mandatory of the GPS ) reference receiver.
Interval Type
This parameter specifies the ADD antenna altitude GPS(Mandatory of the GPS ) reference receiver. (IMP unit: Feet)
Interval Type
3281~3281 3281~3281 0 0
8/7/2013
243267
162734118.xls.ms_office1
alvl
Alarm Severity
This parameter SET specifies the ALMLVL(Man alarm severity to datory) be set.
Critical(Crit ical), Major(Majo Critical,Maj Enumeratio r), or,Minor,W n Type Minor(Mino arning r), Warning(W arning)
ADD CELLINTERFR EQHOCOV(Op 2B event retry tional) AmntOfRpt2 max times SET B INTERFREQH OCOV(Optional )
Maximum number of times for event 2B retry. This parameter defines the number of times for event 2B retry when the measurement control is valid. The larger the value of this parameter, the larger the number of times for inter- Interval frequency Type handover retry, and the higher probability for the UE to be successfully handed over to the target cell whose load is restored. After the maximum number of times for event 2B retry, the RNC sends the interfrequency measurement
0~63
8/7/2013
253267
162734118.xls.ms_office1
Maximum retry times of the event 2C. This parameter defines the number of times for event 2C retry when the measurement control is valid. The larger the value of this ADD parameter, the CELLINTERFR larger the number EQHONCOV( of times for inter2C event retry Optional) frequency Interval AmntOfRpt2 max times SET handover retry, Type C INTERFREQH and the higher ONCOV(Option probability for the al) UE to be successfully handed over to the target cell whose load is restored. When the retry times reaches the maximum value, the RNC stops the retry process. Or if the measurement
0~63
8/7/2013
263267
162734118.xls.ms_office1
Maximum retry times of the event 3A. This parameter defines the number of times for event 3A retry when the measurement control is valid. The larger the value of this parameter, the larger the number of times for interRAT handover Interval retry, and the Type higher probability the UE is successfully handed over to the target cell whose load is restored. When the retry times reaches the maximum value, the RNC stops the retry process. Or if the measurement control message
ADD CELLINTERR ATHOCOV(Op 3A event retry AmntOfRpt3 tional) max times A SET INTERRATHO COV(Optional)
0~63
8/7/2013
273267
162734118.xls.ms_office1
Maximum retry times of the event 3C. This parameter defines the number of times for event 3C retry when the measurement control is valid. The larger the value of this ADD parameter, the CELLINTERR larger the number ATHONCOV( of times for inter3C event retry Optional) RAT handover Interval AmntOfRpt3 max times SET retry, and the Type C INTERRATHO higher probability NCOV(Optional the UE is ) successfully handed over to the target cell whose load is restored. When the retry times reaches the maximum value, the RNC stops the retry process. Or if the measurement control message This parameter specifies to edit sender ADD parameters, TYPRABRLC( receiver Mandatory) parameters, or flow control parameters.
0~63
8/7/2013
283267
162734118.xls.ms_office1
When the parameter is set to YES, the QOS control algorithm is used for AMR services. When the parameter is set to NO, the SET QOS control QOSACT(Optio Enumeratio NO, YES algorithm is not nal) n Type used for AMR services.The QOS actions of AMR services include rate downsizing, inter frequency handover and inter rat handover. Threshold of AMR call drop ratio per SPU to report KPI alarm.In a checking period, if the ratio is SET higher than this KPIALMTHD( threshold and the Optional) number of AMR call release is higher than the related threshol, the KPI alarm of AMR call drop ratio is reported. The minimum number of AMR RAB establish request per SPU to report KPI alarm. In a checking period,if the number of SET AMR RAB KPIALMTHD( establish request Optional) is higher than the threshold and the AMR RAB setup successful ratio is lower than this threshold,the KPI alarm of AMR RAB setup ratio is reported.
NO, YES
Interval Type
0~100
0~100
Interval Type
0~65534
0~65534
8/7/2013
293267
162734118.xls.ms_office1
Threshold of AMR RAB setup successful ratio per SPU to report KPI alarm. In a checking period,if the ratio is lower SET than this Interval KPIALMTHD( threshold and the Type Optional) number of AMR RAB establish request is higher than the related threshold,the KPI alarm of AMR RAB setup ratio is reported. The minimum number of AMR call release per SPU to report KPI alarm.In a checking period, if the number of SET AMR call release Interval KPIALMTHD( is higher than the Type Optional) related threshold and the AMR call drop ratio is higher than this threshold, the KPI alarm of AMR call drop ratio is reported.
0~100
0~100
0~65534
0~65534
8/7/2013
303267
162734118.xls.ms_office1
Timer for triggering a second adjustment of the UL AMR mode. This parameter specifies the duration of waiting for the voice quality enhanced acknowledgement after the UL AMR mode adjustment when SET the associated Interval QOSACT(Optio command is Type nal) delivered. The UL AMRC rate adjust timer starts when AMRC mode adjustment procedure is triggered, and stops when the next measurement report is received. If no measurement report is received when the UL
20~64000
20~64000
8/7/2013
313267
162734118.xls.ms_office1
ANI
Adjacent Node ID
ADD ADJNODE(Ma ndatory) ADD AAL2PATH(M andatory) ADD AAL2RT(Mand atory) ADD ADJMAP(Man datory) ADD IPPATH(Manda tory) ADD IPPATHBIND( Mandatory) ACT IPPM(Mandator y) ACT VCLCC(Manda tory) LOP VCL(Mandator y)
ID of the adjacent node. An RNC can be Interval configured with at Type most 2000 adjacent nodes.
0~1999
0~1999
Altitude of the cell antenna in the WGS-84 coordinates. This is a necessary parameter, ADD controlled by Interval SMLCCELL(O MTRLGY and Type ptional) valid when MET~0(metric system).The value of this parameter has effect on the location result.
32767~327 32767~327 67 67
8/7/2013
323267
162734118.xls.ms_office1
Altitude of the cell antenna in the WGS-84 coordinates. This is controlled by ADD MTRLGY and SMLCCELL(O valid when ptional) IMP~1(British measurement).Th e value of this parameter has effect on the location result. Latitude of the cell antenna in the WGS-84 coordinates. The value corresponding to the latitude A degrees B minutes C seconds is [A + (B/60) + (C/3600)] / 0.000001. For example, the ADD value SMLCCELL(O corresponding to ptional) the latitude 31 degrees 30 minutes 36 seconds is [31 + (30/60) + (36/3600)] / 0.000001 = 31510000. This is controlled by GCDF and valid when DEG~0(degree format).The value of this parameter has effect on the
Interval Type
Interval Type
8/7/2013
333267
162734118.xls.ms_office1
This parameter specifies the latitude of the cell antenna in the WGS-84 coordinates. The input format is ADD ddd:mm:ss.ssss. SMLCCELL(O This is controlled String Type ptional) by GCDF and valid when SEC~1(degree, minute, second format).The value of this parameter has effect on the location result. Longitude of the cell antenna in the WGS-84 coordinates. The value corresponding to the longitude A degrees B minutes C seconds is [A + (B/60) + (C/3600)] / 0.000001. For example, the ADD value Interval SMLCCELL(O corresponding to Type ptional) the longitude 121 degrees 40 minutes 36 seconds is [121 + (40/60) + (36/3600)] / 0.000001 = 121676666. This is controlled by GCDF and valid when DEG~0(degree format).The value of this parameter has effect on the
-90~90
8/7/2013
343267
162734118.xls.ms_office1
Longitude of the cell antenna in the WGS-84 coordinates. The input format is ddd:mm:ss.ssss. ADD This is controlled SMLCCELL(O by GCDF and String Type ptional) valid when SEC~1(degree, minute, second format).The value of this parameter has effect on the location result. Coverage angle of a sector. For an omni-directional ADD cell, the value is Interval SMLCCELL(M 0~3600 360.The value of Type andatory) this parameter has effect on the location result. Azimuth of the main lobe of the cell antenna (the counter-clockwise ADD angle from the Interval SMLCCELL(M direction of the Type andatory) main lobe to the north).The value of this parameter has effect on the location result. Access point(AP) cell ADD indicator. When NRNCCELL(O the indicator is ptional) TRUE, it indicates that the cell is AP cell. Upper-layer application type of the SCTP link.At Iu-b Interface the ADD Upper-Layer SCTPLNK(Man application type is datory) NBAP,at Iu-r, IuPS and Iu-CS Interface the Upper-Layer application type is M3UA.
-180~180
0~3600
APFlag
APFlag
FALSE,TR UE
APP
Application type
NBAP, M3UA
8/7/2013
353267
162734118.xls.ms_office1
APPLIED_ This parameter ON_UPLIN specifies the ADD K, direction where TYPRABBASI Enumeratio APPLIED_ the current typical C(Mandatory) n Type ON_DOW RAB parameters NLINK, are applied. APPLIED_ ON_BOTH
PRIMARY( Active PRIMARY, Enumeratio Area), STANDBY, n Type STANDBY ALL (Standby area), ALL
This parameter PRIMARY( LOD specifies the flag Primary), PRIMARY, PATCH(Option Enumeratio of the active and STANDBY STANDBY, al) n Type standby areas. (Standby), ALL ALL
User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 10.
Gold,Silver, Copper
User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 11.
Gold,Silver, Copper
User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 12.
Gold,Silver, Copper
8/7/2013
363267
162734118.xls.ms_office1
User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 13.
Gold,Silver, Copper
User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 14.
Gold,Silver, Copper
User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 1.
Gold,Silver, Copper
User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 2.
Gold,Silver, Copper
User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 3.
Gold,Silver, Copper
User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 4.
Gold,Silver, Copper
User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 5.
Gold,Silver, Copper
8/7/2013
373267
162734118.xls.ms_office1
User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 6.
Gold,Silver, Copper
User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 7.
Gold,Silver, Copper
User_priority corresponding to Gold, Allocation/Retent Enumeratio Silver, ion priority 8. n Type Copper
Gold,Silver, Copper
User_priority Gold, corresponding to Enumeratio Silver, Allocation/Retent n Type Copper ion priority 9.
Gold,Silver, Copper
ARPRETRY
This parameter specifies the number of times the ARP resends after the specified time exceeds. Assume that "ARP packet resend times" is set to N. If the STR number of times Interval IPCHK(Optiona Type no response is l) received after the ARP is resent for N times, the L3 DETECT FAIL alarm is reported. In the case of a key detect, the switchover of ports may be triggered.
3~10
3 to 10
8/7/2013
383267
162734118.xls.ms_office1
This parameter STR specifies the time- Interval IPCHK(Optiona out value for the Type l) ARP packets.
3~10
300 to 1000
This parameter STR specifies the Interval NODEBBWRP number of an Type T(Mandatory) ATM logical port.
0~255
0 to 255
ATMSN
This parameter NodeB ADD specifies the Interval ATM_TRANS NODEBIP(Man number of the slot Type Slot No. datory) bearing NodeB ATM transport.
14~27
14 to 27
8/7/2013
393267
162734118.xls.ms_office1
ATMSRN
This parameter specifies the NodeB ADD number of the ATM_TRANS NODEBIP(Man subrack bearing Subrack No. datory) NodeB ATM transport.
Interval Type
0~5
0 to 5
ATT
Indicating whether attach/detach is allowed. NOT_ALLOWE D indicates that MS cannot apply the IMSI attach/detach ADD Attach/detach procedure. NOT_ALL NOT_ALL CNDOMAIN(O Enumeratio indication ALLOWED OWED, OWED,AL ptional) n Type indicates that MS ALLOWED LOWED can apply the IMSI attach/detach procedure. It is valid only when [CN domain ID] is set as CS_DOMAIN.
8/7/2013
403267
162734118.xls.ms_office1
This parameter specifies the authentication SERVER, Enumeratio mode during PPP CLIENT n Type or MLPPP link negotiation.
This parameter specifies the user name for PPP or MLPPP link negotiation.
String Type -
0 to 63 character
AUTHPWD
Validate password
This parameter specifies the password for PPP String Type or MLPPP link negotiation.
0 to 15 character
AUTHTYPE
This parameter specifies the authentication protocol type during PPP or MLPPP link negotiation.
8/7/2013
413267
162734118.xls.ms_office1
This parameter specifies whether the auto negotiation is enabled. 1. The auto negotiation must be enabled when "Board type " is set to FG2a, and "Port type" is set to GE. 2. If the auto negotiation is enabled, the SET transmission rate ENABLE, ENABLE, ETHPORT(Opti Enumeratio over the FE port, DISABLE DISABLE onal) n Type work mode, and flow control mode depend on the negotiation results. If the auto negotiation not disabled, you can set the transmission rate over the FE port, work mode, and flow control mode. In this case, ensure that the settings are
AUTO
Auto negotiation
Identifying the available signature end ADD index of an ASC. Interval PRACHASC(O For detailed Type ptional) information of this parameter, refer to 3GPP TS 25.304.
0~15
0~15
8/7/2013
423267
162734118.xls.ms_office1
Identifying the available signature start Available ADD index of an ASC. Availablesign Interval signature start PRACHASC(O For detailed atureStartInde Type index ptional) information of x this parameter, refer to 3GPP TS 25.304.
0~15
0~15
Identifying the available sub channels of an ASC. When a UE has been accessed to a sub channel, if [AICH transmission timing] is set to 1 (using the command ADD AICH), the 4 bits of this parameter will be repeated 3 times to form a ADD Bitstring (12). Interval PRACHASC(O Then, it is put Type ptional) into an "and " calculation together with the Bitstring (12) corresponding to the available sub channel allocated to the PRACH, and a 12-bit data stream is obtained finally. If a bit is 1, the corresponding sub channel is available for this
0~15
0~15
AvailCap
Capability of CN Node
0~65535
0~6553500 0 step:1000
8/7/2013
433267
162734118.xls.ms_office1
AVOL
Alarm VOL.
This parameter Output Switch specified the SET BACK8KCL of backplane output switch of 8 Enumeratio OFF, ON CLK(Optional) KSW1 8K OutClock 1 kHz output clock n Type 1.
OFF, ON
This parameter Output Switch specified the SET BACK8KCL of backplane output switch of 8 Enumeratio OFF, ON CLK(Optional) KSW2 8K OutClock 2 kHz output clock n Type 2.
OFF, ON
8/7/2013
443267
162734118.xls.ms_office1
If [AutoAdaptive Background Noise Update Switch] is set to OFF, it is used to set background noise of the cell. If [Auto-Adaptive Background Noise Update ADD Switch] is set to Interval CELLCAC(Opti ON, new Type onal) background noise is restricted by this parameter and [PARA]BgnAbno rmalThd[/PARA]. For detailed information of this parameter, refer to the 3GPP TS 25.133.
0~621
-112~50,step:0.1
BKP DB(Optional)
This parameter specifies the full path for saving the backup file. If the specified path is not a full path, then it will be String Type treated as the relative path under "installation path in the BAM active workspace\BACK UP\".
0 to 128 characters
BAKIP
This parameter STR specifies the IP IPCHK(Optiona address of the l) standby port.
IP Address Type
0.0.0.0~255 .255.255.25 5
8/7/2013
453267
162734118.xls.ms_office1
This parameter STR specifies the IPCHK(Optiona mask of the l) standby port.
IP Address Type
0.0.0.0~255 .255.255.25 5
This parameter BAM External ADD specifies the IP Address BAMIP Network EMSIP(Optiona virtual IP address Type Virtual IP l) for the BAM external network. This parameter ADD specifies the BAM External IP Address BAMMASK EMSIP(Optiona subnet mask of Network Mask Type l) the BAM external network. ADD CELLSETUP( Mandatory) ADD QUICKCELLS ETUP(Mandato Band indicator ry) ADD GSMCELL(Opt ional) ADD NRNCCELL(M andatory) Band1, Indicating the Band2, selected Band3, frequency Band Band4, in the cell setup Band5, process. For Enumeratio Band6, detailed n Type Band7, information of Band8, this parameter, Band9, refer to 3GPP TS BandIndNot 25.433. Used
0.0.0.0~255 .255.255.25 5
0.0.0.0~255 .255.255.25 5
BandInd
Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, BandIndNot Used
8/7/2013
463267
162734118.xls.ms_office1
This parameter specifies the maximum available bandwidth for each traffic class in the Cell_FACH state with the downlink HSDSCH in use. If the actual data flow exceeds the SET Bandwidth of Interval maximum BandWidthFo FACHBANDW Fach Type bandwidth, the rFACH IDTH(Optional) traffic is buffered so that the buffer occupancy is increased. As a result, the state transition from Cell-FACH to DCH occurs. This parameter should be set according to the traffic class. Uniquely ADD identifying a Interval BS color code GSMCELL(Ma neighboring base Type ndatory) station with the same carrier.
1~1000
1~1000
BCC
0~7
0~7
8/7/2013
473267
162734118.xls.ms_office1
Identifying BCCH frequency number of the inter-RAT cell. BCCH: Broadcast Control Channel GSM1900 Frequency number: (511811) GSM1800 Inter-RAT cell ADD Frequency BcchArfcn frequency GSMCELL(Ma number: (511number ndatory) 866) GSM900 Frequency number: (0-125) or (954-1024) GSM850 Frequency number: (127252) GSM450 Frequency number: (258This parameter specifies the transmission power of the HSPDSCH that sends the data carried on the ADD BCCH HSBCCH. When UE BcchHspdsch CELLEFACH( PDSCH power receive data from Power Optional) the HS-PDSCH in Enhanced CELL_FACH state, the data on the BCCH is also sent on the HSPDSCH.
Interval Type
0~1023
0~1023
Interval Type
-350~150
35~15,step: 0.1
8/7/2013
483267
162734118.xls.ms_office1
When UE is in Enhanced CELL_FACH state, the data on the BCCH is also sent on the HSPDSCH. ADD Meanwhile, the BCCH HSBcchHsscchP CELLEFACH( HS-SCCH shall SCCH power ower Optional) send signaling related to HSPDSCH. This parameter specifies the transmission power of the HSSCCH at the time. Offset of the BCH transmit power from the PCPICH transmit power in a cell. If the value is set too small, the UEs on the cell edge cannot receive the system messages properly. This problem affects the coverage of the downlink BCH transmit ADD common channel BCHPower power BCH(Optional) and furthermore the coverage of the cell. If the value is set too great, it causes interference to other channels, occupies the downlink transmit power, and affects the cell capacity. For detailed information of this parameter, refer to 3GPP TS
Interval Type
-350~150
35~15,step: 0.1
Interval Type
-350~150
8/7/2013
493267
162734118.xls.ms_office1
This parameter specifies the bearer type of the service. - R99: The SET service is carried BearType Bear Type USERGBR(Ma on a non-HSPA ndatory) channel. - HSPA: The service is carried on an HSPA channel. Indicating the ADD bear type of the BEARTYPE DSP bear type N7DPC(Mandat DSP is MTP3 or ory) M3UA.
MTP3, M3UA
Threshold of continuous failed heartbeat detecting between the two RNCs in a RNC pool.If the heartbeat is not HeatBeat Lost ADD detected from the Interval BeatDectThre Times RNCPOOL(Opt peer RNC for a Type d Threshold ional) successive number of times specified by this parameter, the local RNC considers that the peer RNC is faulty. If the heartbeats are detected from the peer RNC for a successive HeatBeat ADD number of times Interval BeatRecvrThr Recover Times RNCPOOL(Opt specified by this Type ed Threshold ional) parameter, the local RNC considers that the peer RNC is normally Interval for the local RNC HeatBeat ADD sending the BeatSending Sending Time RNCPOOL(Opt heartbeat to the Dis Interval ional) peer RNC in the same RNC pool.
1~10
1~10
Interval Type
1~60
1~60
8/7/2013
503267
162734118.xls.ms_office1
The bit rate threshold used to determine whether to perform soft handover for the Best Effort (BE) service on DCH. If current DL DCH bit rates of all the BE services of a user are lower than or equal to this threshold, the SET system will HOCOMM(Opt Enumeratio perform soft ional) n Type handover for this user to guarantee the service quality. When the velocity of the downlink DCH exceeds the restriction of this parameter, RNC will perform intrafrequence hard handover. To avoid the great effect of the system capacity
8/7/2013
513267
162734118.xls.ms_office1
Timer for state transition from CPC_HS-DSCH to E_FACH of BE services, used to detect whether a BE UE in CELL_DCH(with CPC_HS-DSCH) state is in stable low activity state. The too small parameter cannot probably confirm that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the BE service model. Timer for state transition from CPC_HS-DSCH to FACH of BE services, used to detect whether a BE UE in CELL_DCH(with CPC_HS-DSCH) state is in stable low activity state. The too small parameter cannot probably confirm that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the BE service model.
Interval Type
1~65535
1~65535
Interval Type
1~65535
1~65535
8/7/2013
523267
162734118.xls.ms_office1
Timer for state transition from DCH to E_FACH of BE services, used to detect whether a BE UE in CELL_DCH(with DCH) state is in stable low activity SET state. The too UESTATETRA small parameter Interval NSTIMER(Opti cannot probably Type onal) confirm that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the BE service model. Timer for state transition from DCH to FACH of BE services, used to check whether the UE in the CELL_DCH state with non-realtime services is in the stable low activity state. If the value of this SET parameter is too UESTATETRA low, whether the Interval NSTIMER(Opti UE is in the Type onal) stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the BE service model.
1~65535
1~65535
1~65535
1~65535
8/7/2013
533267
162734118.xls.ms_office1
BeDlAct1
The first action selected by the QoS control algorithm when the DL QoS of None, None, BE service RateDegrad RateDegrad First Action SET deteriorates.If e, e, For BE QOSACT(Optio Enumeratio QoS action is InterFreqH InterFreqH Downlink QOS nal) n Type RateDegrade, O, O, then the rate will InterRatHO InterRatHO be downsized to the full coverage rate according to 3-rates rule.
8/7/2013
543267
162734118.xls.ms_office1
BeDlAct2
The second action selected by the QoS control algorithm when the DL QoS of None, None, BE service RateDegrad RateDegrad Second Action SET deteriorates.If e, e, For BE QOSACT(Optio Enumeratio QoS action is InterFreqH InterFreqH Downlink QOS nal) n Type RateDegrade, O, O, then the rate will InterRatHO InterRatHO be downsized to the full coverage rate according to 3-rates rule.
8/7/2013
553267
162734118.xls.ms_office1
BeDlAct3
The third action selected by the QoS control algorithm when the DL QoS of None, None, BE service RateDegrad RateDegrad Third Action SET deteriorates.If e, e, For BE QOSACT(Optio Enumeratio QoS action is InterFreqH InterFreqH Downlink QOS nal) n Type RateDegrade, O, O, then the rate will InterRatHO InterRatHO be downsized to the full coverage rate according to 3-rates rule.
8/7/2013
563267
162734118.xls.ms_office1
Timer for state transition from EDCH to FACH of BE services, used to check whether the UE with BE services carried over the E-DCH is in the stable low activity state. If the value of this parameter is too BE E-DCH To SET low, whether the FACH State UESTATETRA Interval BeE2FStateTr UE is in the Transition NSTIMER(Opti Type ansTimer stable low activity Timer onal) state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the BE service model.
1~65535
1~65535
D16, D32, This parameter D64, D128, specifies the D256, threshold of the D512, traffic volume of D1024, 4A event for D2k, D3k, triggering the D4k, D6k, BE SET transition of BE D8k, D12k, BeEFach2Cp E_FACH2CPC UESTATETRA services from Enumeratio D16k, cTvmThd 4A Threshold NS(Optional) E_FACH to CPC. n Type D24k, If the value of this D32k, parameter is too D48k, high, congestion D64k, may occur over D96k, the common D128k, channel. D192k,
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k
8/7/2013
573267
162734118.xls.ms_office1
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from D0, D10, E_FACH to CPC. D20, D40, This parameter D60, D80, prevents D100, unnecessary D120, BE SET reports that are D160, BeEFach2Cp E_FACH2CPC UESTATETRA caused by traffic Enumeratio D200, cTvmTimeTo 4A Time NS(Optional) volume instability n Type D240, Trig from being D320, triggered. If the D640, value of this D1280, parameter is too D2560, high, the period D5000 of reporting 4A event is delayed and congestion may occur over the common channel. D16, D32, This parameter D64, D128, specifies the D256, threshold of the D512, traffic volume of D1024, 4A event for D2k, D3k, triggering the D4k, D6k, BE SET transition of BE D8k, D12k, BeEFach2DT E_FACH2D UESTATETRA services from Enumeratio D16k, vmThd 4A Threshold NS(Optional) E_FACH to n Type D24k, DCH. If the value D32k, of this parameter D48k, is too high, D64k, congestion may D96k, occur over the D128k, common channel. D192k,
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k
8/7/2013
583267
162734118.xls.ms_office1
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from E_FACH to DCH. This parameter prevents BE SET unnecessary BeEFach2DT E_FACH2D UESTATETRA reports that are vmTimeToTri 4A Time NS(Optional) caused by traffic g volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common This parameter specifies the threshold of the traffic volume of 4A event for triggering the BE transition of BE SET E_FACH2HSservices from BeEFach2HT UESTATETRA DSCH 4A E_FACH to HSvmThd NS(Optional) Threshold DSCH. If the value of this parameter is too high, congestion may occur over the common channel.
D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, Enumeratio D16k, n Type D24k, D32k, D48k, D64k, D96k, D128k, D192k,
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k
8/7/2013
593267
162734118.xls.ms_office1
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from E_FACH to HSDSCH. This parameter prevents BE unnecessary SET BeEFach2HT E_FACH2HSreports that are UESTATETRA vmTimeToTri DSCH 4A caused by traffic NS(Optional) g Time volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE BE F2CPC_E- SET services from BeF2CpcETv DCH 4A UESTATETRA FACH to E-DCH mThd Threshold NS(Optional) with CPC technology. If the value of this parameter is too high, congestion may occur over the common channel.
D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, Enumeratio D16k, n Type D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k,
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k
8/7/2013
603267
162734118.xls.ms_office1
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from FACH to E-DCH with CPC technology. This parameter prevents BE SET unnecessary BeF2CpcETv FACH2CPC_E- UESTATETRA reports that are mTimeToTrig DCH 4A Time NS(Optional) caused by traffic volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE BE SET services from F2CPC_HSBeF2CpcHTv UESTATETRA FACH to HSDSCH 4A mThd NS(Optional) DSCH with CPC Threshold technology. If the value of this parameter is too high, congestion may occur over the common channel.
D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, Enumeratio D16k, n Type D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k,
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k
8/7/2013
613267
162734118.xls.ms_office1
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from FACH to HSD0, D10, DSCH with CPC D20, D40, technology. This D60, D80, parameter D100, prevents D120, BE SET unnecessary D160, F2CPC_HSBeF2CpcHTv UESTATETRA reports that are Enumeratio D200, DSCH 4A mTimeToTrig NS(Optional) caused by traffic n Type D240, Time volume instability D320, from being D640, triggered. If the D1280, value of this D2560, parameter is too D5000 high, the period of reporting 4A event is delayed and congestion may occur over the common channel. D16, D32, This parameter D64, D128, specifies the D256, threshold of the D512, traffic volume of D1024, 4A event for D2k, D3k, triggering the D4k, D6k, SET transition of BE BE F/R2D 4A D8k, D12k, BeF2DTvmT UESTATETRA services from Enumeratio Threshold D16k, hd NS(Optional) FACH to DCH. If n Type D24k, the value of this D32k, parameter is too D48k, high, congestion D64k, may occur over D96k, the common D128k, channel. D192k,
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k
8/7/2013
623267
162734118.xls.ms_office1
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from D0, D10, FACH to DCH. D20, D40, This parameter D60, D80, prevents D100, unnecessary D120, SET reports that are D160, BE F/R2D 4A BeF2DTvmTi UESTATETRA caused by traffic Enumeratio D200, Time meToTrig NS(Optional) volume instability n Type D240, from being D320, triggered. If the D640, value of this D1280, parameter is too D2560, high, the period D5000 of reporting 4A event is delayed and congestion may occur over the common channel. D16, D32, This parameter D64, D128, specifies the D256, threshold of the D512, traffic volume of D1024, 4A event for D2k, D3k, triggering the D4k, D6k, SET transition of BE BE F2E-DCH D8k, D12k, BeF2ETvmTh UESTATETRA services from Enumeratio 4A Threshold D16k, d NS(Optional) FACH to E-DCH. n Type D24k, If the value of this D32k, parameter is too D48k, high, congestion D64k, may occur over D96k, the common D128k, channel. D192k,
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k
8/7/2013
633267
162734118.xls.ms_office1
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from FACH to E-DCH. This parameter prevents unnecessary SET reports that are BE F2E-DCH BeF2ETvmTi UESTATETRA caused by traffic 4A Time meToTrig NS(Optional) volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE BE F2HSSET services from BeF2HTvmT DSCH 4A UESTATETRA FACH to HShd Threshold NS(Optional) DSCH. If the value of this parameter is too high, congestion may occur over the common channel.
D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, Enumeratio D16k, n Type D24k, D32k, D48k, D64k, D96k, D128k, D192k,
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k
8/7/2013
643267
162734118.xls.ms_office1
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from D0, D10, FACH to HSD20, D40, DSCH. This D60, D80, parameter D100, prevents D120, unnecessary SET D160, reports that are UESTATETRA Enumeratio D200, caused by traffic NS(Optional) n Type D240, volume instability D320, from being D640, triggered. If the D1280, value of this D2560, parameter is too D5000 high, the period of reporting 4A event is delayed and congestion may occur over the common channel.
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
8/7/2013
653267
162734118.xls.ms_office1
Timer for state transition from FACH to PCH of BE services, used to check whether the UE in the CELL_FACH state is in the stable low activity state. When this parameter is set to 65535, it is regarded that the state transition SET from FACH to UESTATETRA PCH is not Interval NSTIMER(Opti performed. If the Type onal) value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the common channel resources are wasted. This parameter should be set on the basis of the BE service
1~65535
1~65535
8/7/2013
663267
162734118.xls.ms_office1
Timer for state transition from HS-DSCH to E_FACH of BE services, used to detect whether a BE UE in CELL_DCH(with HS-DSCH) state is in stable low activity state. The SET too small UESTATETRA Interval parameter cannot NSTIMER(Opti Type probably confirm onal) that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the BE service model.
1~65535
1~65535
8/7/2013
673267
162734118.xls.ms_office1
Timer for state transition from HS-DSCH to FACH of BE services, used to check whether the UE in the CELL_DCH(with HS-DSCH) state with BE services is in the stable low activity state. If the value of this BE HS-DSCH SET parameter is too to FACH UESTATETRA Interval BeH2FStateT low, whether the Transition NSTIMER(Opti Type ransTimer UE is in the Timer onal) stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the BE service model.
1~65535
1~65535
Pending time after the traffic D250, volume event 4B D500, BE HSSET is reported. This D1000, BeH2FTvmP DSCH2F 4B UESTATETRA parameter is used Enumeratio D2000, TAT Pending Time NS(Optional) to prevent too n Type D4000, many traffic D8000, volume events 4B D16000 being reported.
8/7/2013
683267
162734118.xls.ms_office1
D8, D16, D32, D64, D128, D256, D512, This parameter is D1024, used to check D2k, D3k, whether the UE in D4k, D6k, the low activity D8k, D12k, state. If the UE is SET D16k, on HS-DSCH UESTATETRA Enumeratio D24k, channel, the low NS(Optional) n Type D32k, activity counter D48k, increases by 1 D64k, every time traffic D96k, volume event 4B D128k, is reported. D192k, D256k, D384k, D512k, D768k
8, 16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k
When the traffic volume is below the 4B threshold D0, D10, and remains so D20, D40, for the period D60, D80, specified by this D100, parameter, the D120, event 4B is SET D160, reported. This UESTATETRA Enumeratio D200, parameter NS(Optional) n Type D240, prevents D320, unnecessary D640, traffic volume D1280, events that are D2560, caused by traffic D5000 volume instability from being triggered.
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
8/7/2013
693267
162734118.xls.ms_office1
This parameter specifies the rate threshold of 2ms TTI on the EDCH for HSUPA BE service. When the cell capability and UE capability Rate threshold allows 2ms TTI, SET BeHsupa2ms of BE on 2ms 2ms TTI on the EFRC(Optional) TtiRateThs TTI of HSUPA DCH is used if the PS BE service carried on HSUPA with uplink rate isn't less than this threshold. Otherwise, 10ms TTI is used. Timer for rejecting rate increase after rate decrease is performed across the Iur interface for BE services. If the best cell is on the DRNC, the SET Timer For BE timer starts when BEInterIurRat QOSACT(Optio Inter Iur Rate rate decrease eUpTimer nal) based on RLC retransmission is triggered. Before the timer expires, requests for rate increase triggered by DL traffic volume event 4A will be rejected.
D8, D16, D32, D64, D128, D144, D256, Enumeratio D384, n Type D608, D1440, D2048, D2880
Interval Type
0~1024
0~1024
The ralative power margin of single BE traffic, used to calculate ADD the triggering CELLDCCC(O BE Event F threshold of event ptional) Interval Reporting F, can avoid the BePwrMargin SET Type Power Margin fluctuation of DCCC(Optional traffic rate in case ) the power becomes restricted after rate is increased.
0~100
8/7/2013
703267
162734118.xls.ms_office1
When the parameter is set to YES, the QOS control algorithm is used for BE services. When the parameter is set to NO, the SET QOS Switch QOS control BEQosPerfor QOSACT(Optio Enumeratio NO, YES For BE Traffic algorithm is not m nal) n Type used for BE services.The QOS actions of BE services include rate downsizing, inter frequency handover and inter rat handover. This parameter specifies the power occupancy ADD of the control part TYPRABBASI of reference TFC. C(Mandatory) For details of this parameter, refer to the 3GPP TS 25.214. This parameter specifies the power occupancy ADD of the data part of TYPRABBASI reference TFC. C(Mandatory) For details of this parameter, refer to the 3GPP TS 25.214.
NO, YES
BetaC
Reference BetaC
Interval Type
1~15
1~15
BetaD
Reference BetaD
Interval Type
1~15
1~15
8/7/2013
713267
162734118.xls.ms_office1
BeUlAct1
The first action selected by the QoS control algorithm when the UL QoS of None, None, BE service RateDegrad RateDegrad First Action SET deteriorates.If e, e, For BE Uplink QOSACT(Optio Enumeratio QoS action is InterFreqH InterFreqH QOS nal) n Type RateDegrade, O, O, then the rate will InterRatHO InterRatHO be downsized to the full coverage rate according to 3-rates rule.
8/7/2013
723267
162734118.xls.ms_office1
BeUlAct2
The second action selected by the QoS control algorithm when the UL QoS of None, None, BE service RateDegrad RateDegrad Second Action SET deteriorates.If e, e, For BE Uplink QOSACT(Optio Enumeratio QoS action is InterFreqH InterFreqH QOS nal) n Type RateDegrade, O, O, then the rate will InterRatHO InterRatHO be downsized to the full coverage rate according to 3-rates rule.
8/7/2013
733267
162734118.xls.ms_office1
BeUlAct3
The third action selected by the QoS control algorithm when the UL QoS of None, None, BE service RateDegrad RateDegrad Third Action SET deteriorates.If e, e, For BE Uplink QOSACT(Optio Enumeratio QoS action is InterFreqH InterFreqH QOS nal) n Type RateDegrade, O, O, then the rate will InterRatHO InterRatHO be downsized to the full coverage rate according to 3-rates rule.
8/7/2013
743267
162734118.xls.ms_office1
For BE service, When the parameter is set to SINGLE, an UL event 6A1 or 5A can independently trigger the QOS enhancement action. The 6A1, 5A switch settings decide whether to perform 6A1 or SET 5A measurement SINGLE, SINGLE, QOSACT(Optio control. When the Enumeratio COMBINE COMBINE nal) parameter is set to n Type COMBINE, only combined events 6A1+5A can trigger the QOS enhancement action, and whether to perform 6A1 and 5A measurement is not controlled by the 6A1 and 5A measurement switch.
BeUlQos5A McSwitch
Event 5A measurement switch when BeUlEvTrigInd is SET Measurement set to SINGLE for QOSACT(Optio Enumeratio NO, YES Of 5A Switch BE service. If this nal) n Type parameter is set to YES, event 5A measurement is delivered.
NO, YES
Event 6A1 measurement switch when BeUlEvTrigInd is SET Measurement set to SINGLE for BeUlQos6A1 QOSACT(Optio Enumeratio NO, YES Of 6A1 Switch BE service. If this McSwitch nal) n Type parameter is set to YES, event 6A1 measurement is delivered.
NO, YES
8/7/2013
753267
162734118.xls.ms_office1
UL event 6D measurement switch for BE SET Measurement service. If this BeUlQos6D QOSACT(Optio Of 6D Switch parameter is set to McSwitch nal) YES, event 6D measurement is delivered. Timer to trigger the next QoS enhancement action for UL BE services. This parameter specifies the duration of waiting for the UL QoS Wait Timer SET enhanced BeUlRateAdj For BE Uplink QOSACT(Optio acknowledgement TimerLen Rate nal) after UL rate adjustment. The timer starts when the BE UL rate adjustment procedure is triggered, and stops when the RNC receives a 6B1/6B2 event or when the timer
NO, YES
Interval Type
20~64000
20~64000
This parameter specifies the number of times the BFD packets STR time out. If Interval IPCHK(Optiona several Type l) consecutive packets are not received, the BFD session is regarded as down.
3~10
3 to 10
8/7/2013
763267
162734118.xls.ms_office1
The MAC-c flow on the Iub interface will increase after Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Enhanced CELLEFACH( CELL_FACH Optional) state, this parameter determines the guaranteed speed of the MAC-c flow that sends background service data on the Iub interface. The MAC-c flow on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Enhanced CELLEFACH( CELL_FACH Optional) state, this parameter determines the maximum speed of the MAC-c flow that sends background service data on the Iub interface.
BGGBR
Interval Type
1~1000
1~1000
BGMBR
Interval Type
1~2000
1~2000
8/7/2013
773267
162734118.xls.ms_office1
This parameter is applied when [PARA]BGNSwit ch[/PARA] is set to ON. (1) If the difference of measured background noise without filtered and the current background noise Background ADD is larger than the Interval BgnAbnormal noise abnormal CELLCAC(Opti RTWP threshold, Type Thd threshold onal) the background noise will not be updated. (2) If the difference of new background noise and the configured value is larger than the RTWP threshold, the background noise will not be updated. Only when the measured background noise's duration reaches this parameter, the output of the autoadaptive background noise update filter could be regarded as ADD effect background Interval CELLCAC(Opti noise, and the Type onal) current value is replaced with the new one. At the same time, the auto-adaptive status should be restarted; otherwise, the output could not be regarded as the effective background noise.
1~400
0.1~40, step:0.1
1~6000
1~6000
8/7/2013
783267
162734118.xls.ms_office1
(1) This parameter, along with the [Algorithm start time], is used to limit the validation time of the background noise automatic updata algorithm. If [Algorithm stop time] is greater than [Algorithm start time], and the background ADD noise automatic Compound hour, min, CELLCAC(Ma updata algorithm Type sec ndatory) is enabled, then the algorithm is activated during the period of [Algorithm stop time] to [Algorithm start time] each day. In other periods, the algorithm fails. If [Algorithm stop time] is less than [Algorithm start time], and the background noise
8/7/2013
793267
162734118.xls.ms_office1
When the number of uplink equivalent users is not larger than this parameter, the RTWP could be regarded as background noise. Therefore, the measured RTWP could be input to ADD the auto-adaptive Interval CELLCAC(Opti background noise Type onal) update filter; otherwise, the RTWP could not be regarded as background noise, and should not be input to the filter, and at the same time, the autoadaptive status should be reset.
0~10
0~10
8/7/2013
803267
162734118.xls.ms_office1
(1) This parameter, along with the [Algorithm stop time], is used to limit the validation time of the background noise automatic updata algorithm. If [Algorithm stop time] is greater than [Algorithm start time], and the background Background ADD noise automatic noise update CELLCAC(Ma BgnStartTime updata algorithm start time ndatory) is enabled, then the algorithm is activated during the period of [Algorithm stop time] to [Algorithm start time] each day. In other periods, the algorithm fails. If [Algorithm stop time] is less than [Algorithm start time], and the background noise When the parameter is 'OFF', the autoAuto-adaptive adaptive ADD background background noise BGNSwitch CELLCAC(Opti noise update update algorithm onal) switch is switched off. Otherwise, the algorithm is switched on.
OFF, ON
8/7/2013
813267
162734118.xls.ms_office1
The difference of RTWP that trigger the update of background ADD noise. If the Interval CELLCAC(Opti difference is Type onal) larger than the threshold, the background will be updated.
1~100
0.1~10, step:0.1
This parameter specifies the target transmission quality of DCH, that is, target BLER of DCH on the radio interface if the subflow is carried on DCH. This QoS-related parameter is used by the CRNC to ADD determine the Interval TYPRABOLPC target SIR value Type (Mandatory) for use in admission and power control. To calculate the value of this parameter, obtain the result of 10*Lg(BLER) where the BLER refers to the actual BLER, and then round the result up.
-63~0
5*10^(7)~1
8/7/2013
823267
162734118.xls.ms_office1
Indicating whether to perform blind handover. FALSE: The cell is not in the alternative cells for blind handover, so blind handover to this cell cannot be triggered. TRUE: The cell is in the alternative cells for blind handover, so blind handover to this cell might be triggered. This parameter is used in the algorithm of the load reshuffling (LDR) intrafrequency blind handover. This parameter defines how many measurement reports are needed for making the blind handover decision. The RNC starts blind handover only if the UE continuously reports adequate intra-frequency measurement reports that meet the quality requirements of blind handover. During the measurement process, if the UE reports an unqualified measurement report, the
BlindHoFlag
FALSE,TR UE
Intrafrequency measurement SET BlindHOIntra report amount INTRAFREQH freqMRAmou of blind O(Optional) nt handover
1,2,4,8
8/7/2013
833267
162734118.xls.ms_office1
This parameter specifies the intrafrequency measurement report interval of blind handover. It determines the intra-frequency measurement reporting interval of Load Reshuffling (LDR) blind handover. The Intrafrequency smaller the value SET BlindHOIntra measurement of this parameter, D250, INTRAFREQH Enumeratio freqMRInterv report interval the smaller the D500 O(Optional) n Type al of blind HO intra-frequency measurement reporting interval, and the smaller the time for intrafrequency measurement. But the greater the influence of signal fluctuation, which can result in wrong handover. On the contrary, the larger the value of Indicating the priority of blind handover. The value 0 represents the highest priority. Priorities 0~15 are assigned to concentric Blind ADD neighboring cells, Interval BlindHOPrio handover GSMNCELL(M which can ensure 0~30 Type Priority andatory) successful handover. Priorities 16~30 are assigned to neighboring cells for blind handover, which cannot ensure successful handover.
250,500
0~30
8/7/2013
843267
162734118.xls.ms_office1
Blind handover condition. If the value is not 115, the handover is defined as Conditional Blind HO, which is used for the interfrequency neighboring cells Interval of the same Type coverage. If the value is 115, the handover is defined as Direct Blind HO, which is used for the interfrequency neighboring cells of larger coverage. This parameter specifies the quality threshold for the event 1F reported cell to trigger blind handover. This parameter defines the lowest quality threshold of the emergency blind handover. The blind handover is implemented only if the signal quality in the cell, Interval which reports Type event 1F, exceeds the specified threshold. Otherwise, the report will be discarded. This parameter is set to raise the possibility of successful blind handover. If the signal quality in the cells that report event 1F are all very poor,
-115~-25
-115~-25
ADD CELLINTRAF 1F event blind REQHO(Option handover BlindHORSC al) trigger P1FThreshold SET condition INTRAFREQH O(Optional)
-115~-25
-115~-25
8/7/2013
853267
162734118.xls.ms_office1
This timer is started when an AAL2 signaling SET entity sends the AAL2TMR(Opt peer node a ional) request for blocking an AAL2 path.
Interval Type
2000~6000 2000~6000 0 0
boxflg
Report Flag
This parameter SET specifies the flag nonrpt(Not BOXRPT(Mand for reporting the Enumeratio Report), nonrpt,rpt atory) alarm to the alarm n Type rpt(Report) box. ADD This parameter BRD(Mandator specifies the y) board class.
BRDTYPE
Board type
PEUa, AEUa, FG2a, This parameter GOUa, ADD specifies the type Enumeratio AOUa, BRD(Optional) of a board. n Type POUa, UOIa, SPUa, DPUb SET This parameter FG2a, ETHPORT(Ma specifies the type Enumeratio GOUa ndatory) of a board. n Type ADD This parameter PEUa, PPPLNK(Mand specifies the type Enumeratio POUa, atory) of a board. n Type UOIa ADD This parameter PEUa, MPLNK(Manda specifies the type Enumeratio POUa tory) of a board. n Type
BRDTYPE
Board type.
BRDTYPE
Board type
BRDTYPE
Board type
PEUa,POU a
8/7/2013
863267
162734118.xls.ms_office1
Base Station Identity Code (BSIC) verification switch. 1. BSIC(Base Station Identity Code): identity code of the base station. 2. This parameter is used to control cells where interRAT REQUIRE measurement D(Verify REQUIRE reports are mode), Enumeratio D, triggered. When NOT_REQ n Type NOT_REQ the value is UIRE(NonUIRE REQUIRED, the verify measurement mode) report is triggered after the BSIC of the measured cell is deciphered correctly; when the value is NOT_REQUIRE, measurement reporting is triggered whatever the BSIC is AEUa, This parameter PEUa, AEUa,AOU specifies the type Enumeratio AOUa, a,PEUa,PO of a board. n Type POUa Ua AEUa, AEUa, This parameter PEUa, PEUa, specifies the type Enumeratio AOUa, AOUa, of a board. n Type POUa POUa
BSICVerify
ADD CELLINTERR ATHONCOV( Optional) ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO NCOV(Optional ) SET INTERRATHO COV(Optional) ADD CELLMBDRIN TERRAT(Optio nal)
BT
Board type
BT
Board type
BT
Board type
PEUa(PEUa ), STR This parameter AEUa(AEU E1T1TST(Man specifies the type Enumeratio a), datory) of a board. n Type AOUa(AO Ua), POUa(POU a)
8/7/2013
873267
162734118.xls.ms_office1
BT
Board type
SCUa, GCUa, GCGa, This parameter SPUa, specifies the type DPUb, LOD of the board PEUa, PATCH(Manda Enumeratio where the AEUa, tory) n Type command is FG2a, executed. GOUa, AOUa, POUa, UOIa, ALL AEUa, SET This parameter PEUa, CLK(Mandator specifies the type Enumeratio AOUa, y) of a board. n Type POUa,
SCUa, GCUa, GCGa, SPUa, DPUb, PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, ALL AEUa, PEUa, AOUa, POUa,
BT
Board type
BT
Board type
AEUa, SET This parameter PEUa, E1T1(Mandator specifies the type Enumeratio AOUa, y) of a board. n Type POUa
BT
Board type
SCUa, GCUa/GCG a, SPUa, This parameter SET DPUb, specifies the type CPUTHD(Man Enumeratio AEUa/PEU of the board to be datory) n Type a/AOUa/U set. OIa/FG2a/G OUa/POUa, MPU
BT
Board Type
ADD This parameter AEUa, IMAGRP(Mand specifies the type Enumeratio AOUa atory) of a board. n Type
AEUa, AOUa
BT
Board type
SET This parameter AOUa, OPT(Mandatory specifies the type Enumeratio POUa, ) of a board. n Type UOIa
8/7/2013
883267
162734118.xls.ms_office1
BT
Board type
ADD This parameter AEUa, ATMLOGICPO specifies the type Enumeratio AOUa, RT(Optional) of a board. n Type UOIa
BWADJ
This parameter specifies whether the dynamic bandwidth ADD adjustment switch IPLOGICPORT Enumeratio OFF, ON for the logical (Optional) n Type port is turned on. The function must be used together with IPPM.
OFF, ON
8/7/2013
893267
162734118.xls.ms_office1
ADD PPPLNK(Optio nal) ADD IMAGRP(Optio nal) ADD FRALNK(Optio nal) ADD UNILNK(Optio nal) ADD MPGRP(Option al)
When the remaining receive bandwidth is smaller than or Interval equal to this Type parameter value, the backward congestion alarm is triggered.
0~1000000
0 to 1000000
8/7/2013
903267
162734118.xls.ms_office1
This parameter specifies the backward congestion threshold. When ADD the remaining Interval IPLOGICPORT bandwidth Type (Optional) reaches this parameter value, the backward congestion alarm is reported.
0~100000
0~100000
This parameter specifies the remaining ADD bandwidth Interval ATMLOGICPO threshold for Type RT(Optional) generating the backward congestion alarm.
0~149000
AOUa/AEU a: 0~64000; UOIa (directly carried on the leaf ATM Logical Port of the optical port): 0~149000; other boards: 0~64000
8/7/2013
913267
162734118.xls.ms_office1
If the available backward bandwidth is less ADD than or equal to Interval AAL2PATH(O this value, the Type ptional) backward congestion alarm is emitted.
0~320000
0~320000
8/7/2013
923267
162734118.xls.ms_office1
If the available backward bandwidth is less ADD than or equal to Interval IPPATH(Option this value, the Type al) backward congestion alarm is emitted.
0~3000000 0~3000000
8/7/2013
933267
162734118.xls.ms_office1
If the available backward bandwidth is less ADD than or equal to Interval RSCGRP(Optio this value, the Type nal) backward congestion alarm is emitted.
0~4000000 0~4000000
8/7/2013
943267
162734118.xls.ms_office1
ADD PPPLNK(Optio nal) ADD IMAGRP(Optio nal) Backward ADD BWDCONG congestion FRALNK(Optio CLRBW clear threshold nal) ADD UNILNK(Optio nal) ADD MPGRP(Option al)
When the remaining receive bandwidth is greater than this Interval parameter value, Type the backward congestion alarm is cleared.
0~1000000
0 to 1000000
8/7/2013
953267
162734118.xls.ms_office1
This parameter specifies the backward congestion clear threshold. When Backward ADD the remaining Interval BWDCONG congestion IPLOGICPORT bandwidth Type CLRBW clear threshold (Optional) reaches this parameter value, the backward congestion alarm is cleared.
0~200000
0~200000
This parameter specifies the remaining Backward ADD bandwidth BWDCONG congestion ATMLOGICPO threshold for CLRBW clear threshold RT(Optional) clearing the backward congestion.
Interval Type
0~149000
AOUa/AEU a: 0~64000; UOIa (directly carried on the leaf ATM Logical Port of the optical port): 0~149000; other boards: 0~64000
8/7/2013
963267
162734118.xls.ms_office1
If the available backward bandwidth is Backward ADD greater than this Interval BWDCONG congestion AAL2PATH(O value, the Type CLRBW clear threshold ptional) backward congestion alarm is cleared.
0~320000
0~320000
8/7/2013
973267
162734118.xls.ms_office1
If the available backward bandwidth is Backward ADD greater than this Interval BWDCONG congestion IPPATH(Option value, the Type CLRBW clear threshold al) backward congestion alarm is cleared.
0~3000000 0~3000000
8/7/2013
983267
162734118.xls.ms_office1
If the available backward bandwidth is Backward ADD greater than this Interval BWDCONG congestion RSCGRP(Optio value, the Type CLRBW clear threshold nal) backward congestion alarm is cleared.
0~4000000 0~4000000
8/7/2013
993267
162734118.xls.ms_office1
ADD PPPLNK(Optio nal) ADD MPGRP(Option al) ADD UNILNK(Optio nal) ADD FRALNK(Optio nal) ADD IMAGRP(Optio nal)
This parameter specifies the Interval receive bandwidth Type reserved for the user in handover.
0~1000000
0 to 1000000
8/7/2013
1003267
162734118.xls.ms_office1
This parameter specifies the backward ADD handover reserved Interval IPLOGICPORT bandwidth. It is Type (Optional) the receive bandwidth reserved for the user in handover.
0~50000
0~50000
This parameter specifies the ADD bandwidth ATMLOGICPO reserved for the RT(Optional) backward handover.
Interval Type
0~149000
AOUa/AEU a: 0~64000; UOIa (directly carried on the leaf ATM Logical Port of the optical port): 0~149000; other boards: 0~64000
8/7/2013
1013267
162734118.xls.ms_office1
Interval Type
0~320000
0~320000
8/7/2013
1023267
162734118.xls.ms_office1
Interval Type
0~3000000 0~3000000
8/7/2013
1033267
162734118.xls.ms_office1
Interval Type
0~4000000 0~4000000
This parameter specifies the maximum bandwidth ADD estimate ratio. It Interval IPLOGICPORT is the ratio of the Type (Optional) bandwidth of each rate up to the current bandwidth.
100~1000
100~1000
8/7/2013
1043267
162734118.xls.ms_office1
BWMODE
Bandwidth Mode
Bandwidth mode.This ADD parameter is valid FULL_DUP FULL_DUP RSCGRP(Mand only when Enumeratio LEX, LEX, atory) Transport n Type HALF_DU HALF_DU Resource Group PLEX PLEX Type is IP.
BWRTPTH
This parameter specifies the bandwidth change threshold of the load control ADD algorithm. When Interval IPLOGICPORT the bandwidth Type (Optional) adjustment exceeds this threshold, the bandwidth of the logical port is updated. The parameter values are described as follows: NODEB_CREDI T_CAC_SWITC H: The system SET performs CAC Bit Field CACALGOSWI based on the Type TCH(Optional) usage state of NodeB credit. When the NodeB's credit is not enough, the system rejects new access requests.
0~100
0~100
CacSwitch
NODEB_C REDIT_CA NODEB_C C_SWITCH REDIT_CA (NodeB C_SWITCH Credit CAC Switch)
SET Indicating Call Shock Bit Field CallShockCtrl CALLSHOCKC whether to control Control Switch Type Switch TRL(Optional) call shock.
8/7/2013
1053267
162734118.xls.ms_office1
Indicating the SET period of call CALLSHOCKC shock control TRL(Optional) judging.
Interval Type
1~5
1~5
Decide which SET carrier is prior USERPRIORIT when ARP and Y(Optional) TrafficClass are both identical.
NONE,DC H,HSPA
CARRYF
Number of the ADD subrack from Interval AAL2PATH(M which the AAL2 Type andatory) Path is led out of RNC.
0~5
0~5
CARRYFLA G
Carry Flag
This field indicate whether ADD NULL, NULL, the IP Path is IPPATH(Option carried on IP Enumeratio IPLGCPOR IPLGCPOR al) n Type T, RSCGRP T, RSCGRP logic port or resource group or null.
8/7/2013
1063267
162734118.xls.ms_office1
ADD IPOAPVC(Opti onal) ADD SAALLNK(Ma Bearing ndatory) CARRYFRA FRAATM link ADD ATMLNKN No. AAL2PATH(M andatory) ADD ATMLOGICPO RT(Optional)
This parameter specifies the number of the fractional ATM Interval link bearing PVC. Type The fractional ATM link must have been configured.
0~31
0 to 31
8/7/2013
1073267
162734118.xls.ms_office1
ADD IPOAPVC(Opti onal) ADD SAALLNK(Ma Bearing IMA ndatory) CARRYIMA group No. ADD GRPN AAL2PATH(M andatory) ADD ATMLOGICPO RT(Optional)
This parameter specifies the number of the IMA group Interval bearing the PVC. Type The IMA group must have been configured.
0~83
0 to 83
SAAL, SCTP, SAAL-SCTP. When the NCP is based on ATM, set Bearing link SAAL(SAA type to SAAL. L Link Type When the NCP is ADD ), based on IP, set NCP(Mandatory SCTP(SCT Bearing link type ) to SCTP. When Enumeratio P Link ADD Type), the NCP is based n Type CCP(Mandatory SAALon ATM/IP, set ) SCTP(SAA Bearing link type L-SCTP to SAAL-SCTP. Link Tpye) For detailed information of this parameter, refer to 3GPP TS 25.430.
8/7/2013
1083267
162734118.xls.ms_office1
This parameter specifies the number of the port on the UOIa_ATM bearing VCL.
Interval Type
0~3
0 to 3
CARRYPN
This parameter specifies the ADD Interval number of the ATMLOGICPO optical port that Type RT(Optional) carries the logical port.
0~3
0~3
8/7/2013
1093267
162734118.xls.ms_office1
CARRYSN
ADD SAALLNK(Ma Number of the ndatory) slot bearing the ADD SAAL link. AAL2PATH(M andatory)
Interval Type
14~27
14~27
CARRYSRN
ADD Number of the SAALLNK(Ma subrack bearing ndatory) the SAAL link.
Interval Type
0~5
0~5
CARRYT
CARRYT
This parameter ADD specifies the IPLOGICPORT bearing type of a (Mandatory) logical port. This parameter specifies the bearing type of a logical port. If the ADD bearing type of a ATMLOGICPO logical port is RT(Mandatory) ATM, the upperlevel logical port must be a Hub logical port.
8/7/2013
1103267
162734118.xls.ms_office1
CARRYT
Bearing type
ADD AAL2PATH(M andatory) ADD Type of the SAALLNK(Ma bearer. ndatory) ADD IPOAPVC(Man datory)
8/7/2013
1113267
162734118.xls.ms_office1
ADD IPOAPVC(Opti onal) ADD SAALLNK(Ma ndatory) ADD AAL2PATH(M andatory) ADD ATMLOGICPO RT(Optional)
This parameter specifies the number of the Interval UNI link bearing Type PVC. The UNI link must have been configured.
0~167
0 to 167
The value of bearing VCI.VCI Interval of the SAAL link Type that goes out of the RNC.
32~65535
32~65535
8/7/2013
1123267
162734118.xls.ms_office1
CARRYVPI
Bearing VPI
The value of bearing VPI.VPI Interval of the SAAL link Type that goes out of the RNC.
0~255
0~255
ADD IPOAPVC(Man datory) Bearing ADD CARRYVPN ATMLGCPOR SAALLNK(Ma T port No. ndatory) ADD AAL2PATH(M andatory)
This parameter specifies the number of the ATM logic port bearing VCL.
Interval Type
0~383
0 to 383
IP address of the ADD CBC (Cell IP Address CBSADDR(Ma Broadcast Type ndatory) Center).
0.0.0.0~255 .255.255.25 5
CBCMASK
Subnet mask
ADD Mask of the subIP Address CBSADDR(Ma network of the Type ndatory) CBC IP address.
0.0.0.0~255 .255.255.25 5
8/7/2013
1133267
162734118.xls.ms_office1
CBS
This parameter ADD Consent burst specifies the IPLOGICPORT size maximum burst (Optional) size.
Interval Type
4500~3276 4500~3276 7 7
ADD CBS Operator QUICKCELLS A CBS Operator Interval CBSOpIndex Index ETUP(Mandato of the cell. Type ry)
0~3
0~3
CBSSAC
CBS SAC
Together with PLMN code and Interval LAC, uniquely Type corresponding to a cell.
0~65535
0~65535
8/7/2013
1143267
162734118.xls.ms_office1
CBSwitch
CB Switch
CCCHGBR
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Enhanced CCCH MACInterval CELLEFACH( CELL_FACH c flow GBR Type Optional) state, this parameter determines the guaranteed speed of the MAC-c flow that sends common control channel data on the Iub interface.
1~1000
1~1000
8/7/2013
1153267
162734118.xls.ms_office1
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Enhanced CCCH MACInterval CCCHMBR CELLEFACH( CELL_FACH c flow MBR Type Optional) state, this parameter determines the maximum speed of the MAC-c flow that sends common control channel data on the Iub interface.
1~2000
1~2000
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, ADD Common channel AF42, TRMMAP(Opti Enumeratio primary path. AF43, EF, onal) n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
8/7/2013
1163267
162734118.xls.ms_office1
Common channel ADD bearing primary Interval LOADEQ(Opti path load Type onal) threshold.
0~100
0~100
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, Common ADD AF42, Common channel CCHSECPA channel TRMMAP(Opti Enumeratio AF43, EF, secondary path. TH secondary path onal) n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
Common channel Common ADD primary channel pri sec Interval CCHSECWH LOADEQ(Opti secondary path path load ratio Type T onal) load ratio threshold threshold.
0~100
0~100
8/7/2013
1173267
162734118.xls.ms_office1
This parameter ADD specifies the 10, 100, ETHMA(Option period of sending Enumeratio 1000 al) the CCMs in an n Type MA.
10,100,1000
CCMODE
Activation mode
This parameter specifies the mode of ACT activating the CC AUTO, VCLCC(Option on the VCL. In Enumeratio AUTO,MA MANUAL al) AUTO mode, the n Type NUAL CC need not be activated on the peer.
CCTMR
Timer_CC
Protection timer started after the BGN, END, RS ADD or ER messages Interval SAALLNK(Opt are sent.If the Type ional) timer expires, these messages are resent.
100~1000
CDVT
This parameter specifies the ADD delay variation Interval ATMTRF(Opti that can be Type onal) tolerated. Physical unit: 0.1 us. When call shock control starts, the SET AMR_RRC Interval CALLSHOCKC number can be Type TRL(Optional) accessed per second for cell. Average altitude of the cell coverage area in the WGS-84 ADD coordinates. This Interval SMLCCELL(O is controlled by Type ptional) MTRLGY and valid when MET~0(metric system).
1~100
1~100
CellAverage Height
32767~327 32767~327 67 67
8/7/2013
1183267
162734118.xls.ms_office1
This parameter specifies the average altitude of the cell coverage area in ADD the WGS-84 SMLCCELL(O coordinates. This ptional) is controlled by MTRLGY and valid when IMP~1(British measurement). The algorithms with the above values represent are as follow: TX_DIVERSITY _ON_TO_OFF:W hen TX Diversity ADD is on to off,the CELLALGOS algorithms of cell WITCH(Option capacity auto al) handle is open. TX_DIVERSITY _OFF_TO_ON:W hen TX Diversity is off to on,the algorithms of cell capacity auto handle is open.
CellAverage HeightImp
Interval Type
TX_DIVER SITY_ON_ TO_OFF(T X diversity capability is on to off), TX_DIVER SITY_OFF _TO_ON(T X diversity capability is off to on)
8/7/2013
1193267
162734118.xls.ms_office1
1)DELAY_ACTI VATION_SUPP ORT (delay activation support indicator):when the indicator is TRUE, it means that the cell support delay activation. Delayed Activation IE indicates that the activation of the ADD Cell capability DL power shall CellCapConta NRNCCELL(M container be delayed until inerFdd andatory) an indicated CFN or until a separate activation indication is received. 2)HSDSCH_SUP PORT(HSDSCH support indicator):when the indicator is TRUE, it means that the cell support HSDSCH and enable downlink traffic Altitude of the cell center in the WGS-84 ADD coordinates. This Cell Center CellCenterAlt SMLCCELL(O is controlled by Altitude itude ptional) MTRLGY and valid when MET~0(metric system). This parameter specifies the altitude of the cell center in the ADD WGS-84 Cell Center CellCenterAlt SMLCCELL(O coordinates. This Altitude itudeImp ptional) is controlled by MTRLGY and valid when IMP~1(British measurement).
DELAY_A CTIVATIO N_SUPPOR T(delay activation support indication), HSDSCH_S UPPORT(H SDSCH support indication), FDPCH_SU PPORT(FDPCH support indication), EDCH_SU PPORT(EDCH support indication), EDCH_2M S_TTI_SUP PORT(EDCH 2ms TTI support indicator), EDCH_2SF 2_AND_2S F4_SUPPO
DELAY_A CTIVATIO N_SUPPOR T,HSDSCH _SUPPORT ,FDPCH_S UPPORT,E DCH_SUPP ORT,EDCH _2MS_TTI_ SUPPORT, EDCH_2SF 2_AND_2S F4_SUPPO RT,EDCH_ 2SF2_SUPP ORT,EDCH _2SF4_SUP PORT,EDC H_SF4_SU PPORT,ED CH_SF8_S UPPORT,E DCH_HAR Q_IR_COM BIN_SUPP ORT,EDCH _HARQ_C HASE_CO MBIN_SUP PORT,CPC
Interval Type
32767~327 32767~327 67 67
Interval Type
8/7/2013
1203267
162734118.xls.ms_office1
Latitude of the cell center in the WGS-84 coordinates. The value corresponding to the latitude A degrees B minutes C seconds is [A + (B/60) + (C/3600)] / 0.000001. ADD For example, the Interval SMLCCELL(O value Type ptional) corresponding to the latitude 31 degrees 30 minutes 36 seconds is [31 + (30/60) + (36/3600)] / 0.000001 = 31510000. This is controlled by GCDF and valid when DEG~0(degree This parameter specifies the latitude of the cell center in the WGS-84 coordinates. The ADD input format is SMLCCELL(O String Type ddd:mm:ss.ssss. ptional) This is controlled by GCDF and valid when SEC~1(degree, minute, second format).
-90~90
8/7/2013
1213267
162734118.xls.ms_office1
Longitude of the cell center in the WGS-84 coordinates. The value corresponding to the longitude A degrees B minutes C seconds is [A + (B/60) + (C/3600)] / 0.000001. ADD For example, the Interval SMLCCELL(O value Type ptional) corresponding to the longitude 121 degrees 40 minutes 36 seconds is [121 + (40/60) + (36/3600)] / 0.000001 = 121676666. This is controlled by GCDF and valid when DEG~0(degree This parameter specifies the longitude of the cell center in the WGS-84 coordinates. The ADD input format is SMLCCELL(O String Type ddd:mm:ss.ssss. ptional) This is controlled by GCDF and valid when SEC~1(degree, minute, second format).
-180~180
CellChoice
ALLCELL( HO Indicating the All cell), ALLCELL, CELL(Mandato target cell choose Enumeratio 3GCELL(3 3GCELL,G ry) method. n Type G cell), SMCELL GSMCELL( GSM cell)
8/7/2013
1223267
162734118.xls.ms_office1
Defining the radio environment type of the cell, such as a typical town cell, urban cell, and mountain area cell. Deviation of altitude standard in the cell coverage area in the WGS-84 coordinates. This is controlled by MTRLGY and valid when MET~0(metric system). This parameter specifies the standard deviation of altitude in the cell coverage area in the WGS-84 coordinates. This is controlled by MTRLGY and valid when IMP~1(British measurement). When call shock control starts, the register and 3G>2G reselect number can be accessed per second for cell.
TU, RA, HT
Interval Type
10000~100 10000~100 00 00
Interval Type
32808~328 32808~328 08 08
Interval Type
1~100
1~100
ADD This parameter SINGLE_H NRNCCELL(O specifies the host Enumeratio OST, ptional) type of a cell. n Type DOUBLE_ HOST
8/7/2013
1233267
162734118.xls.ms_office1
ADD CELLSETUP( Mandatory) ADD GPS(Mandatory ) ADD CELLCMCF(M andatory) ADD CELLINTRAF REQHO(Manda tory) ADD CELLQOSHO( Mandatory) ADD GSMNCELL(M andatory) ADD CELLINTERFR EQHOCOV(Ma ndatory) ADD CELLINTERFR EQHONCOV( Mandatory) ADD CELLHOCOM M(Mandatory) ADD CELLINTERR
CellId
Cell ID
Uniquely identifying a cell. For detailed Interval information of Type this parameter, refer to 3GPP TS 25.401.
0~65535
0~65535
This parameter is valid when [Cell SET ID Changing Interval CIDCHG(Optio Switch] is ON. Type nal) Indicate the period of cell ID changing. Indicating SET whether to use CIDCHG(Optio changing cell id nal) in UU interface.
1~31
1~31
OFF,ON
Flag of ADD CELLID+RTT CELLID+RTT CellidRttActi SMLCCELL(O Method Active location vateFlag ptional) Flag activation.
8/7/2013
1243267
162734118.xls.ms_office1
UE positioning mode when the CELLID+RTT method is selected. The UE SET supports both UECELLIDRTT CELLID+RTT SMLC(Optional based MethodType Method Type ) CELLID+RTT mode and UEassisted CELLID+RTT mode. Cell SF reserved threshold. The code load reshuffling could be triggered only when the minimum available SF of a cell is higher than this threshold. The lower the code resource LDR trigger threshold is, the easier the Cell LDR SF ADD downlink code CellLdrSfRes reserved CELLLDR(Opti resource enters Thd threshold onal) the initial congestion status, the easier the LDR action is triggered, and the easier the subscriber perception is affected. But a lower code resource LDR trigger threshold causes a higher admission success rate because the
UE_BASE D, UE_ASSIS TED, Enumeratio UE_BASE n Type D_PREFER RED, UE_ASSIS TED_PREF ERRED
SF4(SF4), SF8(SF8), SF16(SF16) , SF32(SF32) , Enumeratio SF64(SF64) n Type , SF128(SF1 28), SF256(SF2 56)
ADD Cell location Cell Location CellLocCfgT SMLCCELL(M configuration Setting Type ype andatory) type.
8/7/2013
1253267
162734118.xls.ms_office1
ADD CELLSETUP( Mandatory) ADD QUICKCELLS Identifying a cell String Type ETUP(Mandato name. ry) ADD NRNCCELL(M andatory)
CellName
Cell name
1~31 characters
If the cell downlink load exceeds this threshold, the algorithm will decrease the pilot transmit power of the cell so as to increase the whole system's capacity. This parameter is based on network planning. When ADD Cell overload the cell breathing Interval CellOverrunT CELLLDB(Opti threshold algorithm is Type hd onal) activated, if the value is too small, the physical coverage of the cell is limited so as to avoid cell capacity waste. If the value is too great, the physical coverage is expanded and interference over other cells is increased.
0~100
0~1, step:0.01
8/7/2013
1263267
162734118.xls.ms_office1
If the times the UE in the CELL_PCH state performs cell reselection is greater than or equal to the threshold, it is regarded that the cell reselection is frequent. When the timer expires, the target state is set to URA_PCH. In the next cell update procedure, the UE is informed of state transition to URA_PCH in the CELL_UPDATE _CONFIRM message. Length of the cell reselection frequency timer. This parameter is used together with CellReSelectCou nter to detect the frequency of cell reselection of the UE in the CELL_PCH state. Indicating whether the cell is reserved for extension. If [Cell barred indicator] is NOT_BARRED, and the cell is not reserved for operators but for extension, the UEs regard the cell as barred. For detailed information of this parameter, refer to 3GPP TS 25.331.
Interval Type
1~65535
1~65535
Interval Type
1~65535
1~65535
8/7/2013
1273267
162734118.xls.ms_office1
Indicating whether the cell is reserved for operators. If [Cell barred indicator] is NOT_BARRED, and the cell is reserved for operators, the UEs allocated ADD with Access Class RESERVE RESERVE CELLACCESS 11 or 15 in the Enumeratio D, D, STRICT(Option local PLMN can n Type NOT_RESE NOT_RESE al) select or reselect RVED RVED the cell. While the UEs allocated with Access Class 0~9, 12 and 14 cannot select or reselect the cell. For detailed information of this parameter, refer to 3GPP TS 25.331. Flag of whether adding a cell into the active set will affect the relative threshold of the event 1A. This parameter is a flag of whether adding the cell into the active set will affect the relative threshold ADD AFFECT, AFFECT,N of the event 1A INTRAFREQN Enumeratio NOT_AFFE OT_AFFEC NOT_AFFECT: CELL(Optional) n Type CT T Adding the cell into the active set does not affect the relative threshold of the event 1A. AFFECT: Adding the cell into the active set affects the relative threshold of the event 1A.
8/7/2013
1283267
162734118.xls.ms_office1
Flag of whether adding a cell into the active set will affect the relative threshold of the event 1B. This parameter is a flag of whether adding the cell into the active set will affect the relative threshold ADD AFFECT, AFFECT,N of the event 1B INTRAFREQN Enumeratio NOT_AFFE OT_AFFEC NOT_AFFECT: CELL(Optional) n Type CT T Adding the cell into the active set does not affect the relative threshold of the event 1B. AFFECT: Adding the cell into the active set affects the relative threshold of the event 1B.
When the RRC REQ total number Cell Call SET of one cell reach Interval CellTotalRrc Shock Trigger CALLSHOCKC this threshold the Type NumThd Threshold TRL(Optional) RRC flow control will be triggered.
1~100
1~100
8/7/2013
1293267
162734118.xls.ms_office1
If the cell downlink load is lower than this threshold, the algorithm will increase the pilot transmit power of the cell so as to share load of other cells. This parameter is based on network planning. When ADD the cell breathing Cell underload Interval CellUnderrun CELLLDB(Opti algorithm is threshold Type Thd onal) activated, if the value is too small, the physical coverage of the cell is limited so as to avoid cell capacity waste. If the value is too great, the physical coverage is expanded and interference over other cells is increased. ADD CELLSETUP( Mandatory) ADD QUICKCELLS RAC ETUP(Mandato Configuration ry) Indication ADD NRNCCELL(M andatory) ADD GSMCELL(Ma ndatory)
0~100
0~1, step:0.01
CfgRacInd
This parameter indicates whether RAC is configured. If the NOT_REQ NOT_REQ RNC supports the Enumeratio UIRE, UIRE, PS domain, the n Type REQUIRE REQUIRE value of this parameter must be REQUIRE.
8/7/2013
1303267
162734118.xls.ms_office1
Channel configuration strategy switch. 1) CFG_DL_BLIND _DETECTION_S WITCH: When the switch is on, the DL blind transport format detection function is used for single SRB and AMR+SRB SET bearers. Note that Channel CORRMALGO the UE is only Bit Field configuration SWITCH(Optio required to Type strategy switch nal) support the blind transport format stipulated in 3GPP 25.212 section 4.3.1. 2) CFG_HSDPA_64 QAM_SWITCH: When the switch is on, 64QAM can be configured for the HSDPA service. 3) CFG_HSDPA_M
CfgSwitch
CFG_DL_B LIND_DET ECTION_S WITCH, CFG_HSDP A_64QAM _SWITCH, CFG_HSDP A_MIMO_ SWITCH, CFG_HSPA _DTX_DR X_SWITC H, CFG_HSPA _HSSCCH_ LESS_OP_ SWITCH, CFG_IMS_ SUPPORT_ SWITCH, CFG_LOSS LESS_DLR LC_PDUSI ZECHG_S WITCH, CFG_LOSS LESS_REL OC_CFG_S WITCH, CFG_MUL
CFG_DL_B LIND_DET ECTION_S WITCH, CFG_HSDP A_64QAM _SWITCH, CFG_HSDP A_MIMO_ SWITCH, CFG_HSPA _DTX_DR X_SWITC H, CFG_HSPA _HSSCCH_ LESS_OP_ SWITCH, CFG_IMS_ SUPPORT_ SWITCH, CFG_LOSS LESS_DLR LC_PDUSI ZECHG_S WITCH, CFG_LOSS LESS_REL OC_CFG_S WITCH, CFG_MUL
8/7/2013
1313267
162734118.xls.ms_office1
This parameter specifies the value of the handover protection timer. If services can be set up on channels based on a higher technique after channel handover is completed, the Channel Retry SET handover ChannelRetry Ho Timer COIFTIMER(O protection timer HoTimerLen Length ptional) will be started. When the timer expires, the RNC will try to carry services on channels based on a higher technique. Channel retry cannot be performed before this timer expires. This parameter specifies the value of the channel retry timer. The timer will start after traffic is set up or reconfigured, if SET higher technique Channel Retry ChannelRetry COIFTIMER(O is available. Timer Length TimerLen ptional) Channel retry will be performed after this timer expires. If the value of the parameter is set to 0, channel retry cannot be performed. The coding type of a transport channel.For ADD Channel code detailed ChCodingTyp FACH(Optional type information of e ) this parameter, refer to 3GPP TS 25.212.
Interval Type
0~999
0~999
Interval Type
0~180
0~180
8/7/2013
1323267
162734118.xls.ms_office1
IP Path Ping Timeout Counts.The IP ADD Path fault alarm Interval IPPATH(Option will occur when Type al) the number of unsuccessful ping operation reaches this value.
1~5
1~5
ChIdx
SET Channel index Channel Index MBMSPERF(M for MBMS andatory) performance.
CH0(Chann el 0), CH1(Chann el 1), CH0,CH1,C Enumeratio CH2(Chann H2,CH3,CH n Type el 2), 4 CH3(Chann el 3), CH4(Chann el 4)
CHKN
Check Index
This parameter specifies the index of the BFD. ADD The check index IPPATHBIND( is unique. If the Mandatory) check index is not Interval STR Type specified, a IPCHK(Optiona unique value l) ranging from 0 to 31 is automatically allocated.
0~31
0 to 31
Whether to ADD calculate the SCTPLNK(Opti checksum during Enumeratio NO, YES onal) message n Type receiving.
NO, YES
8/7/2013
1333267
162734118.xls.ms_office1
Whether to ADD calculate the SCTPLNK(Opti Enumeratio NO, YES checksum during onal) n Type message sending.
NO, YES
According to RFC4960, ADD ALDER32 is not ALDER32, ALDER32, SCTPLNK(Opti suitable for Enumeratio CRC32 CRC32 onal) checksum in n Type SCTP, CRC32 is recommended.
This parameter STR specifies the type CHKTYPE Check type IPCHK(Mandat of the check on ory) gateway. If you set this parameter to TEN_MSEC, use [DL basic meas rprt cycle,Unit:10ms] to specify the measurement report period. If SET you set this Time unit for LDM(Optional) ChoiceRprtU parameter to DL basic meas SET nitForDlBasic MIN, use [DL rprt cycle SATLDM(Opti Meas basic meas rprt onal) cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433.
8/7/2013
1343267
162734118.xls.ms_office1
If you set this parameter to TEN_MSEC, use [DL OLC meas rprt cycle,Unit:10ms] to specify the measurement report period. If you set this parameter to MIN, use [DL OLC meas rprt cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. If you set this parameter to TEN_MSEC, use [HSDPA need pwr meas cycle,Unit:10ms] to specify the measurement report period. If you set this parameter to MIN, use [HSDPA need pwr meas cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433.
SET Time unit for LDM(Optional) ChoiceRprtU DL OLC meas SET nitForDlOlcM rprt cycle SATLDM(Opti eas onal)
SET Time unit of LDM(Optional) ChoiceRprtU HSDPA need SET nitForHsdpaP pwr meas cycle SATLDM(Opti wrMeas onal)
8/7/2013
1353267
162734118.xls.ms_office1
If you set this parameter to TEN_MSEC, use [HSDPA bit rate meas cycle,Unit:10ms] to specify the measurement report period. If SET you set this Time unit of LDM(Optional) parameter to ChoiceRprtU HSDPA bit SET MIN, use nitForHsdpaR rate meas cycle SATLDM(Opti [HSDPA bit rate ateMeas onal) meas cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. If you set this parameter to TEN_MSEC, use [HSDPA bit rate meas cycle,Unit:10ms] to specify the measurement report period. If you set this Time unit of parameter to ChoiceRprtU SET HSUPA bit MIN, use nitForHsupaR LDM(Optional) rate meas cycle [HSDPA bit rate ateMeas meas cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433.
8/7/2013
1363267
162734118.xls.ms_office1
Value range: TEN_MSEC, MIN Physical value range: 10 milliseconds, 1 minute Content: If you set this parameter to TEN_MSEC, use [UL basic meas rprt cycle,Unit:10ms] to specify the measurement report period. If you set this parameter to MIN, use [UL basic meas rprt cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. Recommended value: If you set this parameter to TEN_MSEC, use [UL OLC meas rprt cycle,Unit:10ms] to specify the measurement report period. If you set this parameter to MIN, use [UL OLC meas rprt cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433.
SET Time unit for LDM(Optional) ChoiceRprtU UL basic meas SET nitForUlBasic rprt cycle SATLDM(Opti Meas onal)
SET Time unit for LDM(Optional) ChoiceRprtU UL OLC meas SET nitForUlOlcM rprt cycle SATLDM(Opti eas onal)
8/7/2013
1373267
162734118.xls.ms_office1
This parameter specifies the reporting period of the event E of the AMR service. The unit of the reporting period can be 10 ms or minute. This parameter specifies the reporting period of the event E of the BE service. The unit of the reporting period can be 10 ms or minute. This parameter specifies the reporting period of the event F of the BE service. The unit of the reporting period can be 10 ms or minute. This parameter specifies the reporting period of the event E of the VP service. The unit of the reporting period can be 10 ms or minute. This switch determines whether to take statistics of the performance based on the MBMS channel. One MBMS service is defined as a channel for independent MBMS measurement.
ADD CELLQUALIT BE Reporting YMEAS(Option ChoiceRptUn Period Unit al) itForBeE For Event E SET QUALITYME AS(Optional)
ADD CELLQUALIT BE Reporting YMEAS(Option ChoiceRptUn Period Unit al) itForBeF For Event F SET QUALITYME AS(Optional)
ADD CELLQUALIT VP Reporting YMEAS(Option ChoiceRptUn Period Unit al) itForVpE For Event E SET QUALITYME AS(Optional)
ChSwitch
Channel Switch
8/7/2013
1383267
162734118.xls.ms_office1
CID
GSM cell ID
Interval Type
0~65535
0~65535
CIO
This parameter works with the offset of neighboring celloriented Cell Individual Offset (CIO). It is used for intra- or interfrequency handover decisions. The larger the sum, the higher the ADD handover priority CELLSETUP(O of the Cell oriented ptional) neighboring cell. Interval Cell Individual ADD The smaller the Type Offset NRNCCELL(O sum, the lower ptional) the handover priority of the neighboring cell. Usually it is configured to 0. The larger the parameter, the easier of the handover to the neighboring cell. The smaller the parameter, the harder the handover to the
-20~20
8/7/2013
1393267
162734118.xls.ms_office1
It is set according to the topographic feature. This parameter is used for the interRAT handover decision in combination with the neighboring cell oriented CIO. The larger the sum, the higher the handover priority of the GSM cell. The ADD smaller the sum, Interval GSMCELL(Opt the lower the Type ional) handover priority of the GSM cell. The parameter is generally set to 0. As for the impact on network performance: The larger the value of the parameter is, the easier it is to be handed over to the GSM network. The smaller the value Cell individual offset for the GSM cell, which is set according to the topographic feature. This parameter is used for decision making for the inter-RAT ADD handover. The Interval GSMNCELL(O larger the value of Type ptional) the parameter, the higher the handover priority of the GSM cell. The smaller the value of the parameter, the lower the handover priority of the GSM cell.
CIO
-50~50
-50~50
CIOOffset
-50~50
-50~50
8/7/2013
1403267
162734118.xls.ms_office1
CIOOffset
Neighboring cell oriented Cell Individual Offset (CIO). This parameter defines the neighboring cell oriented cell individual offset. The set value functions in combination of Interval the cell oriented Type CIO. Their sum is added to the measurement quantity before the UE evaluated whether an event has occurred. In handover algorithms, this parameter is used for moving the border of a cell.
-20~20
-10~10
CIR
Bandwidth
This parameter ADD specifies the IPLOGICPORT number of a (Mandatory) logical port.
Interval Type
1~1000
64~64000 step:64
CLKTYPE
This parameter SET specifies the type GCUa, CLKTYPE(Ma Enumeratio of the clock GCGa ndatory) n Type board.
GCUa,GCG a
8/7/2013
1413267
162734118.xls.ms_office1
Indicating whether the ADD Closed loop time CELLSETUP(O adjust mode in ptional) the cell is supported. This parameter specifies the startup direction of compressed mode that the NodeB supports. - UL_ONLY: The NodeB supports activation of compressed mode only in the uplink. ADD - DL_ONLY: The NODEBLMTP NodeB supports ARA(Optional) activation of compressed mode only in the downlink. - UL_DL_BOTH: The NodeB supports activation of compressed mode in both uplink and downlink.
TRUE, FALSE
CmCap
8/7/2013
1423267
162734118.xls.ms_office1
CM type of the cell. WALKING WALKING WALKING_SPE _SPEED_A _SPEED_A ED_AND_HOT_ ND_HOT_ ND_HOT_ SPOT_CELL,MI SPOT_CEL SPOT_CEL D_SPEED_AND L, L,MID_SPE _HOT_SPOT_CE MID_SPEE ED_AND_ LL,HIGH_SPEE D_AND_H HOT_SPOT D_AND_HOT_S OT_SPOT_ _CELL,HIG POT_CELL,LO CELL, H_SPEED_ W_SPEED_AND HIGH_SPE AND_HOT _MEDIUM_COV ED_AND_ _SPOT_CE ERAGE_CELL,H HOT_SPOT LL,LOW_S ADD IGH_SPEED_AN _CELL, PEED_AN CELLCMCF(O D_MEDIUM_CO LOW_SPE D_MEDIU ptional) VERAGE_CELL, ED_AND_ M_COVER Enumeratio SET LOW_SPEED_A MEDIUM_ AGE_CEL n Type CMCF(Optional ND_HIGH_COV COVERAG L,HIGH_SP ) ERAGE_CELL,H E_CELL, EED_AND IGH_SPEED_AN HIGH_SPE _MEDIUM D_HIGH_COVE ED_AND_ _COVERA RAGE_CELL,PI MEDIUM_ GE_CELL, CO_NODEB_TY COVERAG LOW_SPE PE_COVERAGE E_CELL, ED_AND_ _CELL,OTHER_ LOW_SPE HIGH_CO CELL ED_AND_ VERAGE_ The CMCF HIGH_CO CELL,HIG parameters are VERAGE_ H_SPEED_ configured on the CELL, AND_HIG basis of the CM HIGH_SPE H_COVER type of the cell. ED_AND_ AGE_CEL After that, the cell HIGH_CO L,PICO_N
8/7/2013
1433267
162734118.xls.ms_office1
CMCF algorithm switch. 1) CMCF_DL_HLS _SWITCH: When the switch is on, the compressed mode supports DL higher-layer scheduling. 2) CMCF_UL_HLS _SWITCH: When the switch is on, SET the compressed CMCF CORRMALGO mode supports CmcfSwitch algorithm SWITCH(Optio UL higher-layer switch nal) scheduling. 3) CMCF_UL_PRE CFG_TOLERAN CE_SWITCH: When the switch is on, the compressed mode of the UE in the compressed mode pre-configuration state can be different from that required by current traffic. A timer to SRNC wait for the response to SET common transport CMCH RSRC CmchRsrcRs STATETIMER( channel resources response timer pTmr Optional) request in the Iur common transport channel procedure.
CMCF_DL _HLS_SWI TCH, CMCF_UL _HLS_SWI TCH, CMCF_UL _PRECFG_ TOLERAN CE_SWITC H, CMCF_WI THOUT_U E_CAP_RE PORT_SWI TCH
CMCF_DL _HLS_SWI TCH, CMCF_UL _HLS_SWI TCH, CMCF_UL _PRECFG_ TOLERAN CE_SWITC H, CMCF_WI THOUT_U E_CAP_RE PORT_SWI TCH
Interval Type
1~10000
1~10000
8/7/2013
1443267
162734118.xls.ms_office1
Compatibility switch. 1) CMP_IU_IMS_P ROC_AS_NOR MAL_PS_SWIT CH: When the switch is on, the IMS signaling assigned by the CN undergoes compatibility processing as an ordinary PS SET service. When the Compatibility CORRMALGO switch is not on, Bit Field CmpSwitch switch SWITCH(Optio no special Type nal) processing is performed. 2) CMP_IU_SYSH OIN_CMP_IUUP _FIXTO1_SWIT CH: When the switch is on, the IUUP version can be rolled back to R99 when complete configurations are applied during inter-RAT ADD CNDOMAIN( Mandatory) ADD CELLRLPWR( Mandatory) ADD TYPRABBASI Identifying the CNDomainId CN domain ID C(Mandatory) Enumeratio type of a CN. n Type ADD CNNODE(Man datory) RST IURESOURCE( Mandatory) RST IU(Mandatory)
CMP_IU_I MS_PROC _AS_NOR MAL_PS_S WITCH, CMP_IU_S YSHOIN_C MP_IUUP_ FIXTO1_S WITCH, CMP_IUR_ H2D_FOR_ LOWR5_N RNCCELL _SWITCH, CMP_IUR_ SHO_DIVC TRL_SWIT CH, CMP_UU_ AMR_SID_ MUST_CF G_SWITC H, CMP_UU_ DST_SERV _CELL_D2 E_SWITCH , CMP_UU_I GNORE_U
CMP_IU_I MS_PROC _AS_NOR MAL_PS_S WITCH, CMP_IU_S YSHOIN_C MP_IUUP_ FIXTO1_S WITCH, CMP_IUR_ H2D_FOR_ LOWR5_N RNCCELL _SWITCH, CMP_IUR_ SHO_DIVC TRL_SWIT CH, CMP_UU_ AMR_SID_ MUST_CF G_SWITC H, CMP_UU_ DST_SERV _CELL_D2 E_SWITCH , CMP_UU_I GNORE_U
8/7/2013
1453267
162734118.xls.ms_office1
ADD CNNODE(Man datory) SET IUTIMERAND NUM(Mandator y) ADD NRIGLBCNID Identifying a CN Interval MAP(Mandator node. Type y) ADD IMSIIDNNSCN IDMAP(Mandat ory) RST IU(Mandatory) RST IURESOURCE(
CNId
CN node ID
0~4095
0~4095
NORMAL, ADD NORMAL, The status of the OFFLOAD, CNNODE(Man Enumeratio OFFLOAD, CN node. INHIBITE datory) n Type INHIBITE D D Mode of resource management. When the interface type is Iub, the value of this parameter ADD SHARE, SHARE, could be SHARE ADJMAP(Man or EXCLUSIVE Enumeratio EXCLUSIV EXCLUSIV datory) E E mode. When the n Type interface type is Iur,Iucs,Iups, the RNC supports only EXCLUSIVE mode. This parameter ACT specifies the LICENSE(Opti index of an onal) operator.
Interval Type
0~3
0 to 3
String Type -
1~31 characters
8/7/2013
1463267
162734118.xls.ms_office1
Interval Type
0~31
0~31
ADD NRNCCELL(M andatory) ADD GSMCELL(Ma ndatory) ADD QUICKCELLS ETUP(Mandato ry) ADD CELLSETUP( Mandatory)
This parameter specifies the index of the operator group that serves the cell.
Interval Type
0~31
0~31
String Type -
1~31 characters
CnOpIndex
Cn Operator Index
Interval Type
0~3,5~31
0~3,5~31
8/7/2013
1473267
162734118.xls.ms_office1
ADD CNOPERATO R(Mandatory) ADD RSCGRP(Mand atory) ADD ADJMAP(Man datory) ADD IPLOGICPORT (Mandatory) ADD ATMLOGICPO RT(Optional) ADD Cn Operator CZ(Mandatory) index. RST IU(Mandatory) RST IURESOURCE( Mandatory) ADD CELLCBSSAC( Mandatory) SET IUTIMERAND NUM(Mandator y) ADD CNNODE(Man datory) ADD Cn Operator 1 CNOPERGRO index. UP(Mandatory) ADD Cn Operator 2 CNOPERGRO index. UP(Mandatory) ADD Cn Operator 3 CNOPERGRO index. UP(Mandatory) ADD Cn Operator 4 CNOPERGRO index. UP(Mandatory)
CnOpIndex
Cn Operator Index
Interval Type
0~3
0~3
CnOpIndex1
Operator 1 Index
Interval Type
0~3,5~31
0~3,5~31
CnOpIndex2
Operator 2 Index
Interval Type
0~3,5~31
0~3,5~31
CnOpIndex3
Operator 3 Index
Interval Type
0~3,5~31
0~3,5~31
CnOpIndex4
Operator 4 Index
Interval Type
0~3,5~31
0~3,5~31
ADD Common Common CnOpIndexC CNOPERGRO Operator Index Operator Index. omm UP(Optional)
Interval Type
5~31,255
5~31,255
8/7/2013
1483267
162734118.xls.ms_office1
Identify operator ONE(One), number in TWO(Two), ADD operator group THREE(Thr CNOPERGRO which is not Enumeratio 1,2,3,4 ee), UP(Mandatory) belong to the n Type FOUR(Four common operator ) number.
CnOpNum
Operator Number
CNProtclVer
CN protocol version
To enlarge the throughout of HSDPA when the NodeB automatic code Code reshuffle algorithem switch based on is enabled, H. If the switch is it's enabled, code recommend occupied by the ed that the R99 service is sharing adjusted toward codes ADD codes with small OFF(OFF), adjacent to CELLHSDPA( numbers. When Enumeratio ON(ON) HSDPA Optional) [Allocate Code n Type code to be Mode] is set to free as Automatic, code possible as can be used by it can, when HSDPA increases the [Code and HSDPA Adjust throughput is switch for improved. Hsdpa] is set to ON,the RNC will select R99 UE to do code adjusting
8/7/2013
1493267
162734118.xls.ms_office1
H-based code tree reshuffle user number threshold. When the switch is enabled, if the number of users on the tree to be reshuffled is no greater than this User Number parameter, the ADD CodeAdjForH for Code reshuffle is Interval CELLHSDPA( sdpaUserNum Adjust for allowed. Type Optional) Thd HSDPA Otherwise, the reshuffle is given up. This parameter limits the number of users involved in one reshuffle so that reshuffle on lots of users at a time is avoided.
1~16
1~16
This parameter specifies one of the triggering conditions of code balancing DRD. (The other SET Code occupied condition is the DRD(Optional) CodeBalancin rate threshold minimum Interval ADD gDrdCodeRat for code spreading factor.) Type CELLDRD(Opt eThd balance drd This condition ional) refers to that the code occupancy in the best cell is not lower than the value of this parameter.
0~100
0~100
8/7/2013
1503267
162734118.xls.ms_office1
This parameter specifies one of the triggering conditions of code balancing DRD. (The other SET SF4, SF8, Minimum SF condition is the DRD(Optional) SF16, SF32, CodeBalancin threshold for code occupancy.) ADD Enumeratio SF64, gDrdMinSFT code balance This condition CELLDRD(Opt n Type SF128, hd drd refers to that the ional) SF256 minimum spreading factor of the best cell is not smaller than the value of this parameter.
8/7/2013
1513267
162734118.xls.ms_office1
This parameter specifies whether the code balancing DRD algorithm will be SET applied. DRD(Optional) Code balance - ON: The code CodeBalancin ADD Enumeratio ON, OFF drd switch balancing DRD gDrdSwitch CELLDRD(Opt n Type algorithm will be ional) applied. - OFF: The code balancing DRD algorithm will not be applied.
ON, OFF
8/7/2013
1523267
162734118.xls.ms_office1
This switch is valid only when the interfrequency handover switch is enabled. TRUE means that interfrequency handover is selected in code resource congestion. FALSE means that interCode frequency ADD FALSE(FA CodeCongSel congestion handover is not FALSE, CELLLDR(Opti Enumeratio LSE), InterFreqHoIn select interselected in code TRUE onal) n Type TRUE(TRU d freq indication resource E) congestion. This parameter should be set based on network resource usage. In the case of multifrequency coverage, if code resources present a bottleneck, such as indoor environment, the parameter is recommended to
8/7/2013
1533267
162734118.xls.ms_office1
SET The message CodeScheme Code Scheme RNCCBPARA( code scheme. Optional)
GERMAN( German), ENGLISH( English), ITALIAN(It alian), FRENCH(F rench), SPANISH( Spanish), DUTCH(Du tch), SWEDISH( Swedish), DANISH(D Enumeratio anish), n Type PORTUGU ESE(Portug uese), FINNISH(F innish), NORWEGI AN(Norweg ian), GREEK(Gr eek), TURKISH( Turkish), HUNGARI AN(Hungar ian),
GERMAN, ENGLISH, ITALIAN, FRENCH, SPANISH, DUTCH, SWEDISH, DANISH, PORTUGU ESE, FINNISH, NORWEGI AN, GREEK, TURKISH, HUNGARI AN, POLISH, LANGUAG EUNSPECI FIED
8/7/2013
1543267
162734118.xls.ms_office1
Type of event 2D/2F measurement thresholds when inter-frequency and inter-RAT measurements coexist. COEXIST_MEA S_THD_CHOIC E_INTERFREQ: choosing the interfrequency InterFreq and ADD oriented InterRat CELLHOCOM parameters as coexist M(Optional) event 2D/2F CoexistMeas Enumeratio measure SET measurement ThdChoice n Type threshold HOCOMM(Opt thresholds for choice ional) inter-frequency measurement. COEXIST_MEA S_THD_CHOIC E_INTERRAT: choosing the interRAT oriented parameters as event 2D/2F measurement thresholds for inter-RAT measurement. When you set the For a PTM service, if the ratio of the intrafrequency cells where the service is transmitted in PTM mode to the intra-frequency cells of a cell reaches the Combine SET Interval percentage CombNCellP Neighbour Cell RNCMBMSPA specified by this Type ercent Percent RA(Optional) parameter, the cell has gains in combining. Then, the power of the FACH carrying the service in the cell decreases by [PARA]SoftCom bPwrOffset[/PAR A].
COEXIST_ MEAS_TH D_CHOICE _INTERFR EQ(Choosin g the interfrequency oriented parameters), COEXIST_ MEAS_TH D_CHOICE _INTERRA T(Choosing the interRAT oriented parameters)
0~100
0~1,step: 0.01
8/7/2013
1553267
162734118.xls.ms_office1
The ralative power margin of combined traffics, used to calculate ADD the triggering CELLDCCC(O Comb Event F threshold of event ptional) Interval CombPwrMar Reporting F, can avoid the SET Type gin Power Margin fluctuation of DCCC(Optional traffic rate in case ) the power becomes restricted after rate is increased.
0~100
NONThis parameter SUPPORTI determines NG_UE_O SET whether Common NLY(NonOPERATORSH PLMN ID is used Supporting Enumeratio ARINGMODE( when the RNC UE Only), n Type Optional) sends the INIT BOTH(Both UE MESSAGE to ), the CN. NEITHER( Neither)
COMTMR1
Timer T1
Timer T1.Interval ADD between failure of Interval SAALLNK(Opt initial alignment Type ional) and origination of next initial alignment.
1~7
1~7
COMTMR2
Timer T2
Timer T2.Total ADD time SSCF will SAALLNK(Opt attempt ional) alignment.
Interval Type
30~90
30~90
COMTMR3
Timer T3
Interval Type
10~200
10~200
8/7/2013
1563267
162734118.xls.ms_office1
The port flow control is disabled when the buffer duration of queue 0 is smaller than or equal to the value of this ADD parameter. When PORTFLOWC Interval the port flow TRLPARA(Opt Type control type is ional) ATM, this parameter specifies the threshold of congestion recovery of the CBR queue.
10~150
10 to 150
The port flow control is disabled when the buffer duration of queue 1 is smaller than or equal to the value of this ADD parameter. When PORTFLOWC Interval the port flow TRLPARA(Opt Type control type is ional) ATM, this parameter specifies the threshold of congestion recovery of the CBR queue.
10~150
10 to 150
8/7/2013
1573267
162734118.xls.ms_office1
The port flow control is disabled when the buffer duration of queue 2 is smaller than or equal to the value of this ADD parameter. When PORTFLOWC Interval the port flow TRLPARA(Opt Type control type is ional) ATM, this parameter specifies the threshold of congestion recovery of the NRTVBR queue.
10~150
10 to 150
The port flow control is disabled when the buffer duration of queue 3 is smaller than or equal to the value of this ADD parameter. When PORTFLOWC Interval the port flow TRLPARA(Opt Type control type is ional) ATM, this parameter specifies the threshold of congestion recovery of the UBR queue.
10~150
10 to 150
8/7/2013
1583267
162734118.xls.ms_office1
The port flow control is disabled when the buffer duration of queue 4 is smaller than or equal to the value of this ADD parameter. When PORTFLOWC Interval the port flow TRLPARA(Opt Type control type is ional) ATM, this parameter specifies the threshold of congestion recovery of the UBR+ queue.
10~150
10 to 150
8/7/2013
1593267
162734118.xls.ms_office1
The port flow control is disabled ADD when the buffer PORTFLOWC duration of queue Interval TRLPARA(Opt 5 is smaller than Type ional) or equal to the value of this parameter.
10~150
10 to 150
The port flow control is enabled when the buffer duration of queue 0 is larger than or equal to the value ADD of this parameter. PORTFLOWC Interval When the port TRLPARA(Opt Type flow control type ional) is ATM, this parameter specifies the congestion threshold of the CBR queue.
10~150
10 to 150
8/7/2013
1603267
162734118.xls.ms_office1
The port flow control is enabled when the buffer duration of queue 1 is larger than or equal to the value ADD of this parameter. PORTFLOWC Interval When the port TRLPARA(Opt Type flow control type ional) is ATM, this parameter specifies the congestion threshold of the RTVBR queue.
10~150
10 to 150
The port flow control is enabled when the buffer duration of queue 2 is larger than or equal to the value ADD of this parameter. PORTFLOWC Interval When the port TRLPARA(Opt Type flow control type ional) is ATM, this parameter specifies the congestion threshold of the NRTVBR queue.
10~150
10 to 150
8/7/2013
1613267
162734118.xls.ms_office1
The port flow control is enabled when the buffer duration of queue 3 is larger than or equal to the value ADD of this parameter. PORTFLOWC Interval When the port TRLPARA(Opt Type flow control type ional) is ATM, this parameter specifies the congestion threshold of the UBR queue.
10~150
10 to 150
The port flow control is enabled when the buffer duration of queue 4 is larger than or equal to the value ADD of this parameter. PORTFLOWC Interval When the port TRLPARA(Opt Type flow control type ional) is ATM, this parameter specifies the congestion threshold of the UBR+ queue.
10~150
10 to 150
8/7/2013
1623267
162734118.xls.ms_office1
The port flow control is enabled ADD when the buffer PORTFLOWC Interval duration of queue TRLPARA(Opt Type 5 is larger than or ional) equal to the value of this parameter.
10~150
10 to 150
Indicating whether the UE in connected mode is allowed to access the cell. When the cell status is BARRED, it ADD indicates that the BARRED, BARRED, CELLACCESS UEs in connected Enumeratio NOT_BAR NOT_BAR STRICT(Manda mode are barred n Type RED RED tory) to select/reselect the cell even in the case of emergency calls. For detailed information of this parameter, refer to 3GPP TS 25.331.
8/7/2013
1633267
162734118.xls.ms_office1
This parameter specifies the RRC redirection strategy. - OFF: RRC redirection is not allowed. Only_To_Inter_F requency: Only RRC redirect SET RRC redirection switch DRD(Optional) to inter-frequency cells is allowed. Allowed_To_Inte r_RAT: RRC redirection to inter-frequency cells and redirection to inter-RAT cells are both allowed. Indicating whether the UE in idle mode is allowed to reselect another intra-frequency cell. This parameter is valid when [Cell barred indicator for SIB4] is BARRED. If this parameter is ALLOWED, the ADD UE in connected Intra-freq cell CELLACCESS mode can select reselection ind STRICT(Option another intrafor SIB4 al) frequency cell when the cell selection/reselecti on condition is satisfied. If this parameter is NOT_ALLOWE D, the UE in idle mod cannot select another intrafrequency cell. The indicator can be neglected in case of emergency calls.
ConnectFailR rcRedirSwitch
ConnIntraFre qReselection
8/7/2013
1643267
162734118.xls.ms_office1
This parameter ADD specifies whether Is connecting CONNPWR SUBRACK(Opt the added RBS is power monitor ional) connected to the WDMB. The hysteresis value of the serving FDD cells in connected mode in case the quality measurement for cell selection and reselection is set to CPICH RSCP. It is related to the slow fading feature of the area where the cell is located. The Hysteresis 1 ADD greater the slow ConnQhyst1s for connect CELLSELRES fading variance mode EL(Optional) is, the greater this parameter. According to the R regulation, the current serving cell involves in cell selection after the measurement value is added with the hysteresis value. The measurement hysteresis aims to prevent the ping-
YES,NO
Interval Type
0~20
0~40, step:2
8/7/2013
1653267
162734118.xls.ms_office1
The hysteresis value of the serving FDD cells in connected mode in case the quality measurement for cell selection and reselection is set to CPICH Ec/No. It is related to the slow fading feature of the area where the cell is located. The ADD greater the slow Interval CELLSELRES fading variance Type EL(Optional) is, the greater this parameter. This parameter is not configured when its value is 255. According to the R regulation, the current serving cell involves in cell selection after the measurement value is added with the hysteresis value.
0~20,255
8/7/2013
1663267
162734118.xls.ms_office1
Offset of cell CPICH RSCP measurement value in cell selection or reselection when the UE is in connected mode. This parameter is used for cell offset in cell selection and reselection. During cell reselection, the cell offset Interval corresponding to Type CPICH Ec/No is QOffset2sn, that to CPICH RSCP is QOffset1sn. Idle is used for idle mode, and Conn for connected mode. ConnQoffset1sn and ConnQoffset2sn are valid only when SIB12Ind = TRUE, namely, the SIB12
-50~50
-50~50
8/7/2013
1673267
162734118.xls.ms_office1
Offset of cell CPICH Ec/No measurement value in cell selection or reselection when the UE is in connected mode. This parameter is used for cell offset in cell selection and reselection. During cell reselection, the cell offset Interval corresponding to Type CPICH Ec/No is QOffset2sn, that to CPICH RSCP is QOffset1sn. Idle is used for idle mode, and Conn for connected mode. ConnQoffset1sn and ConnQoffset2sn are valid only when SIB12Ind = TRUE, namely, the SIB12
-50~50
-50~50
8/7/2013
1683267
162734118.xls.ms_office1
Threshold for inter-frequency cell reselection in connected mode. When the quality (CPICH Ec/No measured by UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the interfrequency cell reselection Inter-freq cell procedure will be ADD reselection started. This Interval ConnSinterse CELLSELRES threshold for parameter is not Type arch EL(Optional) connect mode configured when its value is 127. The intrafrequency cell reselection has a priority higher than the interfrequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection start threshold should be higher
8/7/2013
1693267
162734118.xls.ms_office1
Threshold for intra-frequency cell reselection in connected mode. When the quality (CPICH Ec/No measured by the UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the intrafrequency cell Intra-freq cell reselection ADD reselection procedure will be Interval ConnSintrase CELLSELRES threshold for started. This Type arch EL(Optional) connect mode parameter is not configured when its value is 127. The intrafrequency cell reselection has a priority higher than the interfrequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection start threshold
8/7/2013
1703267
162734118.xls.ms_office1
This parameter is valid when [Cell barred indicator for SIB4] is BARRED. It D10(10 indicates that the seconds), delay of the cell D20(20 can be measured seconds), next time when D40(40 [Cell barred seconds), indicator for ADD D80(80 10, 20, 40, SIB4] is set to CELLACCESS seconds), 80, 160, BARRED. The Enumeratio STRICT(Option D160(160 320, 640, time barred can n Type al) seconds), 1280 be increased or D320(320 reduced in seconds), network planning D640(640 based on the seconds), actual time the D1280(128 cell is barred. For 0 seconds) detailed information of this parameter, refer to 3GPP TS 25.331.
ConnTbarred
8/7/2013
1713267
162734118.xls.ms_office1
It is used to calculate the transmit power of the first preamble in the random access process. The formula is as follows: Preamble_Initial_ Power = Primary CPICH DL TX powerCPICH_RSCP + UL interference + Constant value Constant Value. ADD for calculating Where, Interval PRACHBASIC( Constantvalue initial TX Preamble_Initial_ Type Optional) power Power is the preamble initial TX power, Primary CPICH DL TX power is the downlink transmit (TX) power of PCPICH, CPICH_RSCP is the receive signaling code power of the PCPICH measured by UEs,
-35~-10
-35~-10
8/7/2013
1723267
162734118.xls.ms_office1
CONTEXTT YPE
RST Context type of Context Type IUR(Mandatory the Iur interface ) to be reset.
CONTPING
This parameter specifies whether to run the ping Enumeratio NO, YES command n Type consecutively.
NO,YES
This parameter D0, D8, specifies the DL SET D16, D32, maximum bit rate USERMBR(Opt Enumeratio D64, D128, of conversation ional) n Type D144, for PS domain D256, D384 user. This parameter D0, D8, specifies the UL SET D16, D32, maximum bit rate USERMBR(Opt Enumeratio D64, D128, of conversation ional) n Type D144, for PS domain D256, D384 user.
8/7/2013
1733267
162734118.xls.ms_office1
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Enhanced Conversational CONVGBR CELLEFACH( CELL_FACH MAC-c flow Optional) state, this GBR parameter determines the guaranteed speed of the MAC-c flow that sends conversational service data on the Iub interface. The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Enhanced Conversational CONVMBR CELLEFACH( CELL_FACH MAC-c flow Optional) state, this MBR parameter determines the maximum speed of the MAC-c flow that sends conversational service data on the Iub interface.
Interval Type
1~1000
1~1000
Interval Type
1~2000
1~2000
8/7/2013
1743267
162734118.xls.ms_office1
WBAMR_ BITRATE_ 6.60K, WBAMR_ BITRATE_ 8.85K, WBAMR_ BITRATE_ 12.65K, WBAMR_ ADD BITRATE_ Maximum rate of Max Mode Of CELLAMRCW 14.25K, the wideband Wideband B(Optional) WBAMR_ CopperMaxM AMR speech Enumeratio AMRC For SET BITRATE_ ode service for copper n Type Copper Users AMRCWB(Opt 15.85K, users. ional) WBAMR_ BITRATE_ 18.25K, WBAMR_ BITRATE_ 19.85K, WBAMR_ BITRATE_ 23.05K, WBAMR_ BITRATE_ 23.85K
8/7/2013
1753267
162734118.xls.ms_office1
NBAMR_B ITRATE_4. 75K, NBAMR_B ITRATE_5. 15K, NBAMR_B ITRATE_5. 90K, ADD Maximum rate of NBAMR_B Max Mode Of CELLAMRC(O the narrowband ITRATE_6. Narrowband ptional) CopperMaxM AMR speech Enumeratio 70K, AMRC For SET ode service for copper n Type NBAMR_B Copper Users AMRC(Optiona users. ITRATE_7. l) 40K, NBAMR_B ITRATE_7. 95K, NBAMR_B ITRATE_1 0.20K, NBAMR_B ITRATE_1 2.20K This parameter PING specifies the MAC(Optional) number of sent packets.
COUNT
Interval Type
1~28
1 to 28
8/7/2013
1763267
162734118.xls.ms_office1
Interval Type
SET Counter check Counter check CounterChec CNTCHK(Opti switch switch. kSwitch onal)
ON,OFF
CP1SupInd
This parameter indicates whether CP1_Suppo CP1_Suppo the closed loop Enumeratio rted, rted, TX diversity n Type CP1_not_S CP1_not_S mode 1 upported upported supported.
8/7/2013
1773267
162734118.xls.ms_office1
This parameter specifies the number of subframes transmitted when the priority of reporting CQI is higher than the SET CQI Activity priority of CqiDtxTimer DTXDRXPAR Timer transmitting A(Optional) patterns on the UL DPCCH in DTX mode after one HS-DSCH reception. For details, refer to the 3GPP TS 25.331 protocol. This parameter specifies the CQI feedback cycle in DTX-DRX mode. Currently, the value of this CQI Feedback SET CQIFbCkinIn parameter can be Cycke in DTX- DTXDRXPAR DTXDRXmo set to only D2 DRX mode A(Optional) de because the NodeB supports only D2. For details, refer to the 3GPP TS 25.433 protocol.
D0, D1, D2, D4, D8, D16, D32, Enumeratio D64, D128, n Type D256, D512, INFINITY
D0, D2, D4, D8, D10, D20, 0,2,4,8,10,2 Enumeratio D40, D80, 0,40,80,160, n Type D160, D16, 16,32,64 D32, D64
Maximum number of cell reselection. This parameter, along with the [Time for ADD evaluating max Interval CELLHCS(Opti cell reselection], Type onal) is used for rate evaluation in HCS. For details, refer to 3GPP TS 25.304.
1~16
1~16
8/7/2013
1783267
162734118.xls.ms_office1
This field ADD indicate whether SCTPLNK(Opti the cross IP onal) address is available.
R99 CS R99 CS conversational ADD conversational Interval CSCONVDL service TRMFACTOR( service downlink Type downlink Optional) factor. factor
0~100
0~100
8/7/2013
1793267
162734118.xls.ms_office1
R99 CS ADD R99 CS CSCONVPRI conversational TRMMAP(Opti conversational PATH primary path onal) primary path.
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
R99 CS R99 CS ADD conversational conversational CSCONVPRI LOADEQ(Opti bearing primary pri path load TH onal) path load threshold threshold.
Interval Type
0~100
0~100
8/7/2013
1803267
162734118.xls.ms_office1
R99 CS ADD R99 CS CSCONVSE conversational TRMMAP(Opti conversational CPATH secondary path onal) secondary path.
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
R99 CS R99 CS conversational conversational ADD primary CSCONVSE pri sec path LOADEQ(Opti secondary path CWHT load ratio onal) load ratio threshold threshold.
Interval Type
0~100
0~100
8/7/2013
1813267
162734118.xls.ms_office1
R99 CS R99 CS ADD conversational conversational CSCONVUL TRMFACTOR( service uplink service uplink Optional) factor factor.
Interval Type
0~100
0~100
CsErlang
This parameter ACT Max User specifies LICENSE(Opti Number of CS maximum CS onal) services.
Interval Type
0~61200
0 to 61200
8/7/2013
1823267
162734118.xls.ms_office1
CS domain Relocation GSM load THD. This parameter specifies the CS domain relocation GSM load threshold. When the GSM load policy is used, that is, when [NcovHoOn2GldI ADD nd] in SET CELLINTERR INTERRATHON ATHONCOV( COV is set to Optional) ON, the CS Interval SET domain interType INTERRATHO system relocation NCOV(Optional out process will ) be stopped if the GSM system send its cell load to the RNC and the cell load exceeds the CS domain Reloc GSM load THD. Otherwise, the RNC does not stop the CS domain intersystem relocation out process.
0~100
0~100%
8/7/2013
1833267
162734118.xls.ms_office1
OFF, ON
CsInfoUpdT mr
SET Cs Information OPERATORCF Interval Update protection GPARA(Manda Type timer. tory)
60~900
60~900
8/7/2013
1843267
162734118.xls.ms_office1
This parameter specifies feature SUPP_NO mode of operators NE, SUPP_NO in the CS domain. SET SUPP_IUF NE,SUPP_I You should OPERATORCF LEX, UFLEX,SU configure the Enumeratio GPARA(Option SUPP_MO PP_MOCN, network resource n Type al) CN, SUPP_IUF identifier (NRI) SUPP_IUF LEX_MOC when MOCN or LEX_MOC N Iu-Flex is N supported.
8/7/2013
1853267
162734118.xls.ms_office1
SET Length of CS OPERATORCF NRI length for CSNRILengt NRI in bits GPARA(Manda CS domain. h tory)
Interval Type
1~10
1~10
SET DSACAUTOA LGO(Mandator Restriction for y) CsRestriction CS ADD CELLDSACM ANUALPARA( Mandatory)
Whether to impose the access FALSE, Enumeratio restriction on the TRUE n Type CS domain.
FALSE,TR UE
8/7/2013
1863267
162734118.xls.ms_office1
Indicating whether the cell allows CS service inter-RAT handover. ON: CS service inter-RAT handover is enabled. OFF: CS service inter-RAT handover is disabled. Service handover refers to the Inter-RAT CS ADD handover attribute CSServiceHO handover CELLHOCOM Enumeratio ON, OFF and related Switch switch M(Optional) n Type parameter configuration on the network side for each service. When a service is established, the related measurements and inter-RAT handover are immediately triggered. These two switches are enabled only for service handover;
ON,OFF
8/7/2013
1873267
162734118.xls.ms_office1
ADD R99 CS Interval TRMFACTOR( streaming service Type Optional) downlink factor.
0~100
0~100
8/7/2013
1883267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, ADD R99 CS AF42, TRMMAP(Opti streaming primary Enumeratio AF43, EF, onal) path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
R99 CS ADD streaming bearing Interval LOADEQ(Opti primary path load Type onal) threshold.
0~100
0~100
8/7/2013
1893267
162734118.xls.ms_office1
R99 CS ADD R99 CS CSSTRMSE streaming TRMMAP(Opti streaming CPATH secondary path onal) secondary path.
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
R99 CS R99 CS ADD streaming primary streaming pri Interval CSSTRMSE LOADEQ(Opti secondary path sec path load Type CWHT onal) load ratio ratio threshold threshold.
0~100
0~100
8/7/2013
1903267
162734118.xls.ms_office1
R99 CS ADD R99 CS streaming Interval CSSTRMUL TRMFACTOR( streaming service service uplink Type Optional) uplink factor. factor
0~100
0~100
8/7/2013
1913267
162734118.xls.ms_office1
CS algorithm switch. 1) CS_AMRC_SWI TCH: When the switch is on and the AMRC license is activated, the AMR control function is enabled for AMR services. 2) CS_HANDOVE R_TO_UTRAN_ DEFAULT_CFG _SWITCH: When the switch is on, the default configurations of signaling and RABs, which are stipulated in 3GPP 25.331, are used for relocation of the UE from GSM to WCDMA. When the switch is not on, the default configurations are Indicating the channel type of CS speech service. -DCH: Both uplink and downlink are beared on DCH. -HSPA:Uplink is beared on EDCH, downlink beared on HS-
CsSwitch
CS_AMRC _SWITCH, CS_HAND OVER_TO _UTRAN_ DEFAULT _CFG_SWI TCH, CS_IUUP_ V2_SUPPO RT_SWITC H, CS_ZERO_ C_AMR_C FG_TWO_ CODCH_S WITCH
CS_AMRC _SWITCH, CS_HAND OVER_TO _UTRAN_ DEFAULT _CFG_SWI TCH, CS_IUUP_ V2_SUPPO RT_SWITC H, CS_ZERO_ C_AMR_C FG_TWO_ CODCH_S WITCH
8/7/2013
1923267
162734118.xls.ms_office1
This parameter specifies the relative delay for jitter correction of the CS traffic over the downlink CS Voice HSPA channel. SET CSVoiceHspa Hspa Dl This parameter FRC(Optional) DlRelDelay Relative Delay indicates the maximum CS delay for the traffic transmitted to the UE. For details, see 3GPP TS 25.331. This parameter specifies the relative delay for jitter correction of the CS traffic over the uplink HSPA channel. The CS data is buffered on the CS Voice PDCP layer and SET CSVoiceHspa Hspa Ul then sent to the FRC(Optional) UlRelDelay Relative Delay higher layer in packets after CFN plus CSVoiceHspaUl RelDelay. In this way, the CS data can be transmitted over the HSPA channel at regular intervals.
Interval Type
-100~100
-100~100
Interval Type
-100~100
-100~100
This parameter specifies the TTI EDCH_TTI EDCH_TTI SET type used for CS Enumeratio _10ms, _10ms, FRC(Optional) services over the n Type EDCH_TTI EDCH_TTI uplink HSPA _2ms _2ms channel. Indicating whether to ADD support CS over NRNC(Optional HSPA of the ) neighboring RNC.
OFF, ON
8/7/2013
1933267
162734118.xls.ms_office1
Uniquely identifying a TFC on the SCCPCH. The specific parameter value depends on the ADD CTFC Size (2 SCCPCHTFC( bits: 0~3, 4 bits: Mandatory) Interval 0~15, 6 bits: ADD Type 0~63, 8 bits: PRACHTFC(M 0~255, 12 bits: andatory) 0~4095, 16 bits: 0~65535, 24 bits: 0~16777215). For detailed information of this parameter, refer to 3GPP TS
CTFC
0~1677721 0~1677721 5 5
CTFCSize
Calculated TFC (CTFC) length of the Transport Format Combination Set (TFCS) on the SCCPCH. This ADD parameter value is BIT2, SCCPCHBASI related to the BIT4, BIT6, C(Optional) maximum number BIT8, 2, 4, 6, 8, Enumeratio ADD of Transport BIT12, 12, 16, 24 n Type PRACHBASIC( Format BIT16, Optional) Combinations BIT24 (TFCs) on the transport channel. For detailed information of this parameter, refer to 3GPP TS 25.433.
The sharing offset should be added to the target subrack or SET subsystem. This Control plane CTRLPLNSHA parameter is used Interval CtrlPlnSharin sharing out REPARA(Optio for preferable Type gOutOffset offset nal) selection of the homing subrack and homing subsystem during call forwarding.
1~10
0.01~0.1, step:0.01
8/7/2013
1943267
162734118.xls.ms_office1
Forwarding threshold of control plane load sharing. When the CPU usage is between the sharing threshold SET and overload Control plane CTRLPLNSHA threshold, and Interval CtrlPlnSharin sharing out REPARA(Optio call number in Type gOutThd threshold nal) each second reaches [SharingOutCAP SMidLoad], new arrival call attempts will be shared out to other SPU. CTRLSLOT Slot No. ADD Number of the RSCGRP(Mand MPU slot. atory) Interval Type
0~100
0~1, step:0.01
0,2,4,8,10
0, 2, 4, 8, 10
CTRLSW
This parameter specifies whether to support the Enumeratio ON, OFF configuration n Type rollback function.
ON,OFF
CXT
Cross type
CZ
Classified Zone ID
This parameter ADD specifies the type VPCLCX(Mand of VPL/VCL atory) cross connection. Uniquely identifying a classified zone. ADD The value of CZ(Mandatory) Classified Zone ID is denoted by decimal numerals.
VPLCX, VCLCX
Interval Type
0~4799
0~4799
8/7/2013
1953267
162734118.xls.ms_office1
This parameter is used to check whether the UE in the low activity state. If the UE is on DCH channel, the low activity counter increases by 1 every time BE D2F/R Or SET traffic volume D2F2PTvmT F/R2P 4B UESTATETRA event 4B is hd Threshold NS(Optional) reported. If the UE is on FACH channel, the low activity counter increases by 1 if the traffic volume is 0 in the traffic volume event 4B report. Pending time after the traffic volume event 4B SET is reported. This BE D2F/R 4B D2FTvmPTA UESTATETRA parameter is used Pending Time T NS(Optional) to prevent too many traffic volume events 4B being reported. When the traffic volume is below the 4B threshold and remains so for the period specified by this parameter, the event 4B is SET BE D2F/R 4B reported. This D2FTvmTime UESTATETRA Time parameter ToTrig NS(Optional) prevents unnecessary traffic volume events that are caused by traffic volume instability from being triggered. D8, D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, Enumeratio D24k, n Type D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D250, D500, D1000, Enumeratio D2000, n Type D4000, D8000, D16000
8, 16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k
D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
8/7/2013
1963267
162734118.xls.ms_office1
After the 1A measurement report is received, the rate is reduced to the threshold 1A Rate Down SET rate for soft Interval Dccc1APenal Penalty Time DCCC(Optional handover and the Type tyTime Length ) timer specified by this parameter starts. The DL rate cannot be increased before the timer expires. This parameter defines the length of penalty timer for SHO failure after rate reduction in the active set. When the rate reduction in the active set is performed which triggers the increase of SHOs in the target cell, if the target cell SET fails to join the Interval INTRAFREQH active again, the Type O(Optional) RNC starts the penalty timer for SHO failure. This parameter defines the length of the penalty timer. Before the timer expires, the rate increasing in the active set is prohibited, but rate reduction is not prohibited. Such penalty strategy is applied
1~255
1~255
Period of penalty timer DcccShoPena for SHO ltyTime failure after down rate
0~255
0~255
8/7/2013
1973267
162734118.xls.ms_office1
Strategy for adjustment of the rate of the PS BE service when the UE is in the CELL_DCH state. RATE_UP_AND _DOWN_ON_D SET CH indicates that DCCC(Optional the rate over the ) DCH can be raised or lowered. RATE_UP_ONL Y indicates that the rate over the DCH can only be raised, which means that the UE can switch to the FACH state at Length of the penalty period within which the rate of a BE service cannot be increased even if the 4A measurement SET report is received. DCCC(Optional Increase of the ) BE service rate is triggered by the 4A measurement report.4A report will not be processed until this Penalty Timer expires. This parameter specifies the period of DCH throughput ratio measurement.Ma cd performs SET statistic of traffic DCCC(Optional volume on DCH ) and reports 4B events which are used for the rate decrease process of BE service set up on DCH.
DcccStg
DCCC Strategy
Interval Type
1~65535
1~65535
Interval Type
1~1000
10~10000, step: 10
8/7/2013
1983267
162734118.xls.ms_office1
This parameter specifies the number of measurement periods during which no event 4B related to DCH throughput is reported again after such an event 4B is reported. This parameter is set to avoid too many channel ADD reconfiguration Interval TYPRABDCC operations. The Type CMC(Optional) larger the value of this parameter, the longer the time from the last reporting of throughputrelated event 4B on DCH to the next reporting, and the smaller the possibility of triggering throughputrelated event 4B on DCH.
0~1023
0~1023
8/7/2013
1993267
162734118.xls.ms_office1
This parameter specifies the number of measurement periods from the moment when the DCH rate falls below the 4B threshold to the moment when the throughputrelated event 4B on DCH is triggered. This parameter is set to ADD avoid unnecessary TYPRABDCC reports triggered CMC(Optional) by DCH throughput fluctuation. The larger the value of this parameter, the longer the required duration of the DCH throughput keeping below the 4B threshold, and the smaller the possibility of triggering throughputThis parameter specifies the SET subnet number of SUBNET(Optio the internal nal) debugging IP address of the RNC.
Interval Type
0~1023
0~1023
Interval Type
DefaultCnOp
Default CnOperator
This parameter specifies the default operator SET that RNC chooses OPERATORSH Interval in the MOCN ARINGMODE( Type cell. The value Optional) 255 means that no default operator is defined.
0~3,255
0~3,255
8/7/2013
2003267
162734118.xls.ms_office1
This parameter specifies the constant that is used by the RNC to compute the DPCCH_Power_ Offset which is further used by the UE to calculate the UL DPCCH_Initial_P ower during the open-loop power control. The formulas are as Constant value SET follows: Interval DefaultConst configured by FRC(Optional) DPCCH_Power_ Type antValue default Offset = Primary CPICH DL TX power + UL interference + Default Constant Value DPCCH_Initial_P ower = DPCCH_Power_ Offset CPICH_RSCP where DPCCH_Power_ Offset is the DPCCH initial When the RNC is performing downlink open power control, it evaluates link consumption according to the PCPICH TX power and the ADD PCPICH signal Interval CELLCAC(Opti intensity detected Type onal) in UE access. However, in some cases, the UE may not report the signal intensity. In this situation, the RNC uses this parameter to evaluate link consumption.
-35~-10
-35~-10
-30~30
-30~30
8/7/2013
2013267
162734118.xls.ms_office1
This parameter specifies the delay time. When the RNC recovers SET from disaster and POOLPRIMHO starts to operate, Interval STPOLICY(Ma it performs reType ndatory) host policy for the primary hosted NodeB after the specified delay time.
Delay
0~3600
0~3600
DELAY
This parameter specifies the ADD maximum delay Interval Max diff delay IMAGRP(Optio difference Type nal) between different IMA links in an IMA group.
4~255
4 to 100(AEUa), 4 to 255(AOUa)
8/7/2013
2023267
162734118.xls.ms_office1
DelayClass
Delay Class
This parameter specifies the delay class. ADD According to the TYPRABOLPC specification, a (Mandatory) maximum of five Interval ADD delay classes, that Type TYPRABRLC( is, class 1 to class Mandatory) 5, are available. The five classes do not overlap each other. This parameter specifies the threshold of code occupancy offset between the current cell and the target cell when code SET balancing DRD is Interval DRD(Optional) applied. Only Type when the cell code occupancy offset reaches this threshold can a neighboring cell be selected to be a candidate cell for DRD.
1~5
1~5
0~100
0~100
8/7/2013
2033267
162734118.xls.ms_office1
Actual minimum required RX level = minimum ADD required RX level CELLSELRES + extended Delta Min Rx EL(Mandatory) Interval DeltaQrxlevm minimum level ADD Type in required RX NRNCCELL(M level. For details, andatory) refer to the 3GPP TS 25.331 10.3.2.3.
-2~-1
-4~2,step:2
DENO
M3UA destination entity indexes and Interval M3UA Type destination entity have a one-to-one correspondence.
0~118
0~118
DESTIP
IP Address Type
0.0.0.0~255 .255.255.25 5
8/7/2013
2043267
162734118.xls.ms_office1
DESTIP
This parameter TRC Destination IP specifies a IPADDR(Mand address destination IP atory) address.
IP Address Type
0.0.0.0~255 .255.255.25 5
DESTMEPID
RMEP ID
PING This parameter Interval MAC(Mandator specifies the ID Type y) of a remote MEP.
1~100
1 to 100
DESTMEPID
RMEP ID
1~100
1 to 100
Direction
Direction
This parameter specifies the ADD Interval period of GPS(Optional) Type reporting the DGPS data. This parameter specifies the direction that the traffic volume measurement is applicable to. - DOWNLINK: ADD indicates TYPRABDCC downlink traffic Enumeratio CMC(Mandator n Type volume y) measurement. - UPLINK: indicates uplink traffic volume measurement or EDCH throughput measurement.
1~60
1 to 60
8/7/2013
2053267
162734118.xls.ms_office1
There are two combination methods for uplink combination of soft handover: one is maximum ratio combination at the NodeB Rake receiver, which gives the MAY(Node highest B chooses combination gain; whether the other is combine at selective SET NodeB), combination at HOCOMM(Opt Enumeratio MUST(Mus the RNC, which ional) n Type t combine at gives a relatively NodeB), smaller MUST_NO combination gain. T(Must The default value combine at of the indication RNC) switch is MAY, which means the NodeB decides whether to implement maximum ratio combination according to its own physical conditions; when
DL activity DL AF of R99 SET factor of the R99 Interval DlAmrConvA AMR conv ADMCTRL(Op AMR Type F service tional) conversational service.
0~100
8/7/2013
2063267
162734118.xls.ms_office1
Duration from when the AMR TX power is beyond the ADD threshold Ea or CELLQUALIT below the AMR Trigger YMEAS(Option threshold Eb to Interval DlAmrTrigTi Time Of Event al) when the event Ea Type meE E SET or Eb is triggered. QUALITYME This parameter is AS(Optional) used to avoid faulty reporting due to instability of power.
1~6000
10~60000, step: 10
DL activity DL AF of R99 SET factor of the R99 Interval DlBackgroun background ADMCTRL(Op background Type dAF service tional) service.
0~100
L3 filtering coefficient. The larger the value of this parameter, the stronger the smoothing effect SET and the higher the DL basic LDM(Optional) anti-slow-fading DlBasicCom common SET capability, but the mMeasFilter measure filter SATLDM(Opti lower the signal Coeff coeff onal) change tracing capability. For detailed information of this parameter, refer to 3GPP TS 25.433. This parameter specifies the DL DL rate of initial access rate SET DlBeH2DIniti HSDPA BE used when FRC(Optional) alRate traffic as H2D HSDPA BE services switch to the DCH.
D0, D1, D2, D3, D4, D5, D6, D7, Enumeratio D8, D9, n Type D11, D13, D15, D17, D19
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
D8, D16, D32, D64, Enumeratio D128, n Type D144, D256, D384
8/7/2013
2073267
162734118.xls.ms_office1
This parameter specifies the default rate threshold for decision to use DCH to carry DL PS domain background/intera ctive services. If the FRC parameters of the best cell cannot be obtained, this SET default value will FRCCHLTYPE be used. Only DL BE traffic PARA(Optional when the DL DlBeTraffDe DCH decision ) Enumeratio D8, D16 service rate is cThs threshold ADD n Type higher than or CELLFRC(Opti equal to this onal) threshold, and the UL service rate is higher than or equal to the uplink threshold, the service will be set up on DCH. Otherwise, it will be set up on CCH. According to the product specifications, only the
8, 16
8/7/2013
2083267
162734118.xls.ms_office1
DL BE traffic Initial bit rate. When DCCC function is D8, D16, enabled, the D32, D64, DL BE traffic SET 8,16,32,64,1 DlBeTraffInit downlink initial Enumeratio D128, Initial bit rate FRC(Optional) 28,144,256, Bitrate bit rate will be set n Type D144, 384 to this value if the D256, D384 downlink max bit rate is higher than the initial bit rate.
This parameter specifies the default rate D8, D16, threshold for D32, D64, decision to use D128, HS-DSCH to D144, carry DL PS D256, domain D384, background/intera SET DL BE traffic D768, ctive services. FRCCHLTYPE DlBeTraffThs threshold on Enumeratio D1024, When the PARA(Optional OnHsdpa HSDPA n Type D1536, maximum DL ) D1800, service rate is D2048, higher than or D3600, equal to this D7200, threshold, the D10100, service will be D13900 carried on HSDSCH. Otherwise, it will be carried on
8, 16, 32, 64, 128, 144, 256, 384, 768, 1024, 1536, 1800, 2048, 3600, 7200, 10100, 13900
8/7/2013
2093267
162734118.xls.ms_office1
Duration from when the BE TX power is beyond the threshold Ea to when the event ADD Ea is triggered or CELLQUALIT from when the BE BE Trigger YMEAS(Option TX power is Interval DlBeTrigTim Time Of Event al) below the Type eE E SET threshold Eb to QUALITYME when the event AS(Optional) Eb is triggered. This parameter is used to avoid faulty reporting due to instability of power. Duration within which the measured power being lower than the threshold is allowed for BE ADD service. This CELLQUALIT parameter is used BE Trigger YMEAS(Option to avoid faulty Interval DlBeTrigTim Time Of Event al) reporting due to Type eF F SET instability of QUALITYME power. If the AS(Optional) value of this parameter is set too high, delay is caused. If the parameter is set to A, the hysteresis time is A x 10 ms. SET LDM(Optional) SET SATLDM(Opti onal)
1~6000
10~60000, step: 10
1~6000
10~60000, step: 10
Interval Type
1~32
1~32
8/7/2013
2103267
162734118.xls.ms_office1
Different admission policies are used for dedicated channel and common channel users. For common channel users, resources instead of separate power admission decision are reserved. For dedicated channel ADD users, according Interval CELLCAC(Opti to the current load Type onal) factor and the characteristics of the new call, the CAC algorithm predicts the new TX power with the assumption of admitting the new call, then plus with the premeditated common channel DL load factor to get the predicted DL load factor.
DlCCHLoad RsrvCoeff
0~100
0~1, step:0.01
8/7/2013
2113267
162734118.xls.ms_office1
Admission threshold of the total cell downlink power. If the value is too high, too many ADD users will be Interval CELLCAC(Opti admitted. Type onal) However, the throughput of a single user is easy to be limited. If the value is too low, cell capacity will be wasted.
0~100
0~1, step:0.01
This parameter specifies the compression method that the NodeB supports in the downlink. - SF/2: SF reduction by two ADD HIGHER_LAYE Bit Field NODEBLMTP R_SCHDL: Type ARA(Optional) higher layer scheduling If both SF/2 and HIGHER_LAYE R_SCHDL are selected, the NodeB supports both of the compression methods in the
8/7/2013
2123267
162734118.xls.ms_office1
DLCODENO
Reserved DL code No
Number of the DL code to be ADD reserved. For RESERVEOVS details, refer to F(Mandatory) the 3GPP TS 25.213 protocol.
Interval Type
0~255
0~255
The percentage of the conversational AMR service threshold to the 100% downlink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the AMR service admission. That is, when an AMR DL threshold ADD service is Interval DlConvAMR of Conv AMR CELLCAC(Opti accessing, the Type Thd service onal) RNC evalutates the measurement value of the downlink load after the service is accessed. If the DL load of a cell is higher than this threshold after the access of an AMR speech service, this service will be rejected. If the DL load of a cell
0~100
0~1, step:0.01
8/7/2013
2133267
162734118.xls.ms_office1
The percentage of the conversational non-AMR service threshold to the 100% downlink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the non-AMR service admission. That DL threshold is, when a nonADD of Conv AMR service is DlConvNonA CELLCAC(Opti non_AMR accessing, the MRThd onal) service RNC evalutates the measurement value of the downlink load after the service is accessed. If the DL load of a cell is higher than this threshold after the access of a nonAMR speech service, this service will be rejected. If the DL load of a cell Number of users selected in a DL LDR CS domain inter-RAT SHOULDBE load handover. The target subscribers of this parameter ADD are the CS CELLLDR(Opti domain DL CS should DlCSInterRat onal) subscribers. be HO user ShouldBeHO ADD Because the CS number UeNum NODEBLDR(O domain ptional) subscribers are session subscribers in general and they have little impact on load, you can set this parameter to a comparatively
Interval Type
0~100
0~1, step:0.01
Interval Type
1~10
1~10
8/7/2013
2143267
162734118.xls.ms_office1
Number of users selected in a DL LDR CS domain inter-RAT SHOULDNOTB E load handover. The target subscribers of this parameter are the ADD CS domain CELLLDR(Opti DL CS should subscribers. DlCSInterRat onal) not be HO user Because the CS ShouldNotHO ADD number domain UeNum NODEBLDR(O subscribers are ptional) session subscribers in general and they have little impact on load, you can set this parameter to a comparatively high value. For a BE service that has a low maximum rate, the DCCC algorithm is not obviously effective yet it Downlink Bit SET increases DlDcccRateT Rate Threshold DCCC(Optional algorithm hd For DCCC ) processing. Thus, the traffic-based DCCC algorithm is applied to BE services whose maximum DL rate is greater than the
Interval Type
1~10
1~10
D8, D16, D32, D64, Enumeratio D128, n Type D144, D256, D384
8/7/2013
2153267
162734118.xls.ms_office1
Maximum DL rate during network planning when coverage of the entire cell is ensured. When the DL TCP is limited, the current rate is reduced to the full coverage rate if the current rate is ADD greater than the D8, D16, CELLDCCC(O full coverage rate. Downlink Full D32, D64, ptional) For a BE service DlFullCvrRat Coverage Bit Enumeratio D128, SET that has a low e Rate n Type D144, DCCC(Optional maximum rate, D256, D384 ) the DCCC algorithm is not obviously effective yet it increases algorithm processing. Thus, the DCCC algorithm is applied to BE services whose maximum DL rate is greater than the
8/7/2013
2163267
162734118.xls.ms_office1
DlGBR
This parameter SET specifies the DL USERGBR(Opt GBR of the BE ional) service.
D0, D8, D16, D32, Enumeratio D64, D128, n Type D144, D256, D384
8/7/2013
2173267
162734118.xls.ms_office1
Some cell resources can be reserved for handover UEs to guarantee handover success rate and improve access priority of handover services. This SF4(SF4), parameter defines SF8(SF8), the quantity of SF16(SF16) downlink code , and CE resources SF32(SF32) reserved for , DL handover ADD handover. SFOFF SF64(SF64) DlHoCeCode credit and code CELLCAC(Opti Enumeratio refers to that no , ResvSf reserved SF onal) n Type resources is SF128(SF1 reserved. SF32 28), refers to that a SF256(SF2 code resource 56), with SF = 32 and SFOFF(SF its corresponding OFF) credit resource are reserved. The backer position the value is in {SF4,SF8,SF16,S F32,SF64,SF128, SF256,SFOFF}, the less code and credit resources
8/7/2013
2183267
162734118.xls.ms_office1
The percentage of the handover service admission threshold to the 100% downlink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the handover admission. That is, when a service is handing over to DL handover ADD a cell, the RNC DlHOThd access CELLCAC(Opti evalutates the threshold onal) measurement value of the downlink load after the service is accessed. If the DL load of a cell is higher than this threshold after the access, this service will be rejected. If the DL load of a cell will not be higher than this threshold, this Reserved DL power factor for HSUPA user. The higher the value is, the more resources ADD reserved for the DL HSUPA DlHSUPARs CELLCAC(Opti HSUPA control reserved factor vdFactor onal) channel, which leads to resource waste. If the value is too low, HSUPA user quality may be impacted.
Interval Type
0~100
0~1, step:0.01
Interval Type
0~100
0~1, step:0.01
8/7/2013
2193267
162734118.xls.ms_office1
DL activity DL AF of R99 SET factor of the R99 Interval DlInteractAF interactive ADMCTRL(Op interactive Type service tional) service.
0~100
The UE can be selected to process load handover only when its bandwidth is less than this threshold. The higher the parameter is, the higher the service rate of the user in handover is, and the more obviously the cell ADD load is decreased. Interval CELLLDR(Opti However, high Type onal) value of the parameter gives rise to the fluctuation and congestion of the target cell load. The lower the parameter is, the smaller amplitude of the load decreases as a result of the interfrequency load handover, and the easier it is to
0~400000
0~400000
8/7/2013
2203267
162734118.xls.ms_office1
The interfrequency neighboring cell could be selected as the destination of load handover only when its load remaining space is larger than this threshold. The lower the parameter is, the easier it is to find ADD a qualified target DlInterFreqH DL HO load Interval CELLLDR(Opti cell for the blind oCellLoadSpa space threshold Type onal) handover. ceThd Excessively small value of the parameter, however makes the target cell easily enter the congestion status. The higher the parameter is, the more difficult it is for the interfrequency blind handover occurs.
0~100
0~1, step:0.01
8/7/2013
2213267
162734118.xls.ms_office1
The mechanism of the LDR is that an action is performed in each [LDR period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of RABs selected in DL LDRexecuting ADD DlLdrAMRR AMR rate downlink LDRInterval CELLLDR(Opti ateReduction reduction RAB AMR voice Type onal) RabNum number service rate reduction. If the parameter value is too high, the LDR action may fluctuate greatly and over control may occur (the state of basic congestion turns into another extreme-underload). If the parameter value is too low, the LDR SET LDM(Optional) SET SATLDM(Opti onal) Length of smoothing filter window of downlink LDR.
1~10
1~10
Interval Type
1~32
1~32
8/7/2013
2223267
162734118.xls.ms_office1
Number of RABs selected in a DL LDR BE traffic rate reduction. In the actual system, this parameter can be set on the basis of the actual circumstances. If the high-rate subscribers occupy a high proportion, set the ADD parameter to a CELLLDR(Opti comparatively onal) low value. If the Interval ADD high-rate Type NODEBLDR(O subscribers ptional) occupy a low proportion, set the parameter to a comparatively high value. Because the basic congestion control algorithm is designed to slowly decrease cell load, you need to set this parameter to a comparatively
1~10
1~10
8/7/2013
2233267
162734118.xls.ms_office1
Reserved SF threshold in downlink credit LDR. The downlink credit LDR could be triggered only when the SF factor corresponding to the downlink SF4(SF4), reserved credit is SF8(SF8), higher than the SF16(SF16) ADD uplink or , CELLLDR(Opti downlink credit SF32(SF32) SF4,SF8,SF onal) SF reserved , Enumeratio 16,SF32,SF ADD threshold. The SF64(SF64) n Type 64,SF128,S NODEBLDR(O lower the , F256 ptional) parameter value SF128(SF1 is, the easier the 28), credit enters the SF256(SF2 congestion status, 56) the easier the LDR action is triggered, and the easier the user experience is affected. A lower code resource LDR trigger threshold, however, causes a
8/7/2013
2243267
162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter traff Qos rehas the same negotiation) ADD content as , CELLLDR(Opti DlLdrFirstAction. Enumeratio CSInterRat onal) The selected n Type ShouldBeL actions, however, DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),
DlLdrEighth Action
NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,MBMSDec Power,Code Adj,CSInter RatShouldN otLDHO,PS InterRatSho uldNotLDH O
8/7/2013
2253267
162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as DL LDR fifth onal) , DlLdrFifthAc DlLdrFirstAction. Enumeratio action ADD CSInterRat tion The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),
NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,MBMSDec Power,Code Adj,CSInter RatShouldN otLDHO,PS InterRatSho uldNotLDH O
8/7/2013
2263267
162734118.xls.ms_office1
NOACT: No NoAct(no load reshuffling action), action is taken. InterFreqL INTERFREQLD DHO(interHO: The interfreq load frequency load handover), handover is BERateRed performed. (BE traff NoAct,Inter BERATERED: rate FreqLDHO, Channels are reduction), BERateRed, reconfigured for QoSRenego QoSRenego the BE service. (uncontrolle ,CSInterRat QOSRENEGO: d real-time ShouldBeL ADD The renegotiation traff Qos reDHO,PSInt CELLLDR(Opti on the QoS of the negotiation) erRatShould DL LDR first onal) uncontrollable , DlLdrFirstAct Enumeratio BeLDHO,A action ADD real-time service CSInterRat ion n Type MRRateRed NODEBLDR(O is performed. ShouldBeL ,MBMSDec ptional) CSINTERRATS DHO(CS Power,Code HOULDBELDH domain Adj,CSInter O: The inter-RAT inter-rat RatShouldN SHOULDBE load should be otLDHO,PS handover of the load InterRatSho CS domain is handover), uldNotLDH performed. PSInterRatS O PSINTERRATS houldBeLD HOULDBELDH HO(PS O: The inter-RAT domain SHOULDBE load inter-rat handover of the should be PS domain is load performed. handover),
8/7/2013
2273267
162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as onal) , DlLdrFirstAction. Enumeratio ADD CSInterRat The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),
DlLdrFourth Action
NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,MBMSDec Power,Code Adj,CSInter RatShouldN otLDHO,PS InterRatSho uldNotLDH O
8/7/2013
2283267
162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter traff Qos rehas the same negotiation) ADD content as DL LDR ninth , DlLdrNinthA CELLLDR(Opti DlLdrFirstAction. Enumeratio action CSInterRat ction onal) The selected n Type ShouldBeL actions, however, DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),
NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,MBMSDec Power,Code Adj,CSInter RatShouldN otLDHO,PS InterRatSho uldNotLDH O
8/7/2013
2293267
162734118.xls.ms_office1
Number of RABs selected in a DL LDR uncontrolled real-time traffic QoS renegotiation. The target subscribers of this parameter are the PS domain real-time subscribers. The setting of this parameter is ADD analogous to the DL LDR un- CELLLDR(Opti setting of BE DlLdrPsRTQ ctrl RT Qos re- onal) service rate Interval osRenegRab nego RAB ADD reduction Type Num num NODEBLDR(O subscriber ptional) number. Because the number of subscribers performing QoS renegotiation may be smaller than the value of this parameter, for example, the candidate subscribers selected for downlink LDR do not meet the QoS
1~10
1~10
8/7/2013
2303267
162734118.xls.ms_office1
If the ratio of DL load of the cell to the downlink capacity is lower than this threshold, the DL load reshuffling function of the cell is stopped. After the basic congestion state of the cell load is released, the system no longer implements the ADD LDR action. Interval CELLLDM(Opt Because the load Type ional) fluctuates, the difference between the LDR release threshold and trigger threshold should be higher than 10%. The pingpong effect of the preliminary congestion state may occur. The lower the LDR trigger and release thresholds
0~100
0~1, step:0.01
8/7/2013
2313267
162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as onal) , DlLdrFirstAction. Enumeratio ADD CSInterRat The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),
NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,MBMSDec Power,Code Adj,CSInter RatShouldN otLDHO,PS InterRatSho uldNotLDH O
8/7/2013
2323267
162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter traff Qos rehas the same negotiation) ADD content as DL LDR , DlLdrSeventh CELLLDR(Opti DlLdrFirstAction. Enumeratio seventh action CSInterRat Action onal) The selected n Type ShouldBeL actions, however, DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),
NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,MBMSDec Power,Code Adj,CSInter RatShouldN otLDHO,PS InterRatSho uldNotLDH O
8/7/2013
2333267
162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as DL LDR sixth onal) , DlLdrSixthAc DlLdrFirstAction. Enumeratio action ADD CSInterRat tion The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),
NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,MBMSDec Power,Code Adj,CSInter RatShouldN otLDHO,PS InterRatSho uldNotLDH O
8/7/2013
2343267
162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter traff Qos rehas the same negotiation) ADD content as DL LDR tenth , DlLdrTenthA CELLLDR(Opti DlLdrFirstAction. Enumeratio action CSInterRat ction onal) The selected n Type ShouldBeL actions, however, DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),
NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,MBMSDec Power,Code Adj,CSInter RatShouldN otLDHO,PS InterRatSho uldNotLDH O
8/7/2013
2353267
162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as DL LDR third onal) , DlLdrThirdA DlLdrFirstAction. Enumeratio action ADD CSInterRat ction The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),
NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,MBMSDec Power,Code Adj,CSInter RatShouldN otLDHO,PS InterRatSho uldNotLDH O
8/7/2013
2363267
162734118.xls.ms_office1
If the ratio of DL load of the cell to the downlink capacity is not lower than this threshold, the DL load reshuffling function of the cell is triggered. After the basic congestion state of the cell load is released, the system no longer implements the ADD LDR action. Interval CELLLDM(Opt Because the load Type ional) fluctuates, the difference between the LDR release threshold and trigger threshold should be higher than 10%. The pingpong effect of the preliminary congestion state may occur. The lower the LDR trigger and release thresholds If the DL load state of the cell is ADD lasted longer than Interval CELLLDM(Opt this threshold, the Type ional) DL load state of the cell transfers.
0~100
0~1, step:0.01
10~600000 10~600000
This parameter specifies the maximum number of TFCs (Transport Format D16, D32, Combination) D48, D64, ADD allowed in the D96, D128, NODEBLMTP Enumeratio downlink. The D256, ARA(Optional) n Type larger the value of D512, this parameter, D1024 the larger the number of available TFCs in the downlink.
8/7/2013
2373267
162734118.xls.ms_office1
ADD Reserved DL DL MBMS DlMBMSRsv CELLCAC(Opti power factor for reserved factor dFactor onal) MBMS service.
Interval Type
0~100
0~1, step:0.01
Smooth filtering coefficient for DL measured values. The smooth filtering algorithm is used to avoid random interference in measurement reporting. ADD Smoothness is D0, D1, CELLQUALIT decided by the D2, D3, D4, YMEAS(Option filtering D5, D6, D7, al) coefficient of the Enumeratio D8, D9, SET measurement. n Type D11, D13, QUALITYME The greater the D15, D17, AS(Optional) filtering D19 coefficient is, the greater the smoothing effect is and the less the random interference is. Yet the respond to changes of the measured value becomes slower.
This parameter determines whether Downlink Mid SET automatic or AUTO_CA Bit Rate DlMidRateCa DCCC(Optional manual mode is Enumeratio LC, 0, 1 Calculate lc ) used for 3-step n Type HAND_AP Method adjustment of the POINT DL intermediate rate.
8/7/2013
2383267
162734118.xls.ms_office1
Threshold of the DL intermediate rate when the 3step mode is used D16, D32, Downlink Mid SET 16, 32, 64, for DL rate D64, D128, DlMidRateTh Bit Rate DCCC(Mandato Enumeratio 128, 144, adjustment and D144, d Threshold ry) n Type 256, 384 the manual mode D256, D384 is used for DL intermediate rate adjustment.
8/7/2013
2393267
162734118.xls.ms_office1
The AMRC needs to check whether the TFO/TrFO exists before adjusting DL AMR speech rate. If the TFO/TrFO does not exist, the CN has the associated encoder and the RNC delivers the RATE SET CONTROL DL Mode AMRC(Optiona command to the Change l) CN and starts the Interval DlModeChan Waiting Timer SET timer. If the Type geTimerLen Length AMRCWB(Opt TFO/TrFO exists, ional) the CN has no associated encoder and the local RNC delivers to the peer RNC a command requesting the AMR mode at a lower level. In addition, the local RNC starts the timer. After the peer RNC
DL activity DL AF of R99 SET factor of the R99 Interval DlNonAmrCo non AMR conv ADMCTRL(Op non AMR Type nvAF service tional) conversational service.
0~100
Interval Type
1~32
1~32
8/7/2013
2403267
162734118.xls.ms_office1
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus ADD reducing the cell Interval CELLOLC(Opti downlink load. Type onal) The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of RABs selected in executing
1~10
1~10
8/7/2013
2413267
162734118.xls.ms_office1
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus ADD reducing the cell CELLOLC(Opti downlink load. onal) The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of downlink OLC fast TF restriction L3 filtering coefficient. The larger the value of this parameter, the stronger the smoothing effect SET and the higher the LDM(Optional) anti-slow-fading SET capability, but the SATLDM(Opti lower the signal onal) change tracing capability. For detailed information of this parameter, refer to 3GPP TS 25.433.
Interval Type
0~100
0~100
D0, D1, D2, D3, D4, D5, D6, D7, Enumeratio D8, D9, n Type D11, D13, D15, D17, D19
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
8/7/2013
2423267
162734118.xls.ms_office1
If the ratio of DL load of the cell to the downlink capacity is lower than this threshold, the DL overload and congestion control function of the cell is stopped. The lower the OLC trigger threshold is, the easier the system is in the ADD overload status. Interval CELLLDM(Opt An excessively Type ional) low value of the OLC trigger threshold is very detrimental to the system performance. The lower the OLC release threshold is, the harder the system releases the overload. The value of the OLC release threshold should not be much lower than
0~100
0~1, step:0.01
8/7/2013
2433267
162734118.xls.ms_office1
User release is an extreme method in reducing the cell load and recovering the system when the cell is overloaded and congested. The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on DL OLC traff ADD the action rules to Interval DlOlcTraffRe release RAB CELLOLC(Opti perform this Type lRabNum number onal) action. This parameter defines the maximum number of RABs released in executing downlink OLC service release. For the users of a single service, the releasing of RABs means the complete releasing of the users. The SET LDM(Optional) DL OLC trigger Interval SET hysteresis. Type SATLDM(Opti onal)
0~10
0~10
1~6000
10~60000, step:10
8/7/2013
2443267
162734118.xls.ms_office1
If the ratio of DL load of the cell to the downlink capacity is not lower than this threshold, the DL overload and congestion control function of the cell is triggered. The lower the OLC trigger threshold is, the easier the system is in the ADD overload status. Interval CELLLDM(Opt An excessively Type ional) low value of the OLC trigger threshold is very detrimental to the system performance. The lower the OLC release threshold is, the harder the system releases the overload. The value of the OLC release threshold should not be much lower than
0~100
0~1, step:0.01
8/7/2013
2453267
162734118.xls.ms_office1
The percentage of other service thresholds to the 100% downlink load. The services refer to other admissions except the conversational AMR service, conversational non-AMR service, and handover scenarios. It is applicable to ADD algorithm 1 and Interval CELLCAC(Opti algorithm 2. The Type onal) parameter is used for controlling other service admissions. That is, when a service is accessing, the RNC evalutates the measurement value of the downlink load after the service is accessed. If the DL load of a cell is higher than this threshold after the
0~100
0~1, step:0.01
DLOVSFSF
Orthogonal Variable Spreading Factor SF4, SF8, ADD (OVSF) of the SF16, SF32, RESERVEOVS DL code to be Enumeratio SF64, F(Mandatory) reserved. For n Type SF128, details, refer to SF256 the 3GPP TS 25.213 protocol.
8/7/2013
2463267
162734118.xls.ms_office1
Number of users selected in a DL LDR PS domain inter-RAT SHOULDBE load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis ADD of the actual CELLLDR(Opti circumstances. If DL PS should DlPSInterRat onal) the high-rate Interval be HO user ShouldBeHO ADD subscribers Type number UeNum NODEBLDR(O occupy a high ptional) proportion, set the parameter to a comparatively low value. If the high-rate subscribers occupy a low proportion, set the parameter to a comparatively high value. Because the basic congestion control algorithm
1~10
1~10
8/7/2013
2473267
162734118.xls.ms_office1
Number of users selected in a DL LDR PS domain inter-RAT SHOULDNOTB E load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis of the actual circumstances. If the high-rate subscribers occupy a high proportion, set the parameter to a comparatively low value. If the high-rate subscribers occupy a low proportion, set the parameter to a comparatively high value. Because the basic congestion Rate adjustment switch of link stability control for DL QoS of AMR services. When the parameter is set to YES, DL rate of AMR services can be adjusted. Inter-frequency handover switch of link stability control for DL QoS of AMR services. When the parameter is set to YES, interfrequency handover can be performed for AMR services to ensure the QoS.
ADD CELLLDR(Opti DL PS should DlPSInterRat onal) not be HO user ShouldNotHO ADD number UeNum NODEBLDR(O ptional)
Interval Type
1~10
1~10
Switch Of SET AMR DlQosAmrAd QOSACT(Optio Downlink Rate jSwitch nal) Adjustment
NO, YES
InterFreq HO SET DlQosAmrInt Switch For QOSACT(Optio erFreqHoSwit Downlink nal) ch AMR
NO, YES
8/7/2013
2483267
162734118.xls.ms_office1
Inter-RAT handover switch of link stability control for DL QoS of AMR SET services. When QOSACT(Optio the parameter is Enumeratio NO, YES nal) set to YES, inter- n Type RAT handover can be performed for AMR services to ensure the QoS. Timer length for downlink Qos measurement. This parameter controls the time lengths for the inter-frequency and inter-RAT measurement based on Qos. After interfrequency or interRAT ADD measurement CELLQOSHO( starts, if no interOptional) frequency Interval 0~512 SET handover is Type QOSHO(Option performed when al) this timer expires, the measurement is stopped, and the compressed mode is deactivated, if any. If this parameter is set to 0, this indicates that the timer will not be started. For the interfrequency or interRAT
NO, YES
0~512
8/7/2013
2493267
162734118.xls.ms_office1
Inter-frequency handover switch of link stability control for DL QoS of VP services. When the parameter is set to YES, interfrequency handover can be performed for VP services to ensure the QoS. Rate adjustment switch of link stability control for DL QoS of WAMR services. When the parameter is set to YES, DL rate of WAMR services can be adjusted. Inter-frequency handover switch of link stability control for DL QoS of WAMR services. When the parameter is set to YES, interfrequency handover can be performed for WAMR services to ensure the QoS. Inter-RAT handover switch of link stability control for DL QoS of WAMR services. When the parameter is set to YES, interRAT handover can be performed for WAMR services to ensure the QoS.
NO, YES
Switch For SET DlQosWAmr WAMR QOSACT(Optio AdjSwitch Downlink Rate nal)
NO, YES
InterFreq HO SET DlQosWAmrI Switch For QOSACT(Optio nterFreqHoS WAMR nal) witch Downlink
NO, YES
NO, YES
8/7/2013
2503267
162734118.xls.ms_office1
OFF(The switch of DL R99 When the switch congestion is on, the control is DL R99 SET congestion off), DlR99CongC Congestion DPUCFGDAT detection and Enumeratio ON(The trlSwitch Control Switch A(Optional) control for DL n Type switch of R99 service is DL R99 supported. congestion control is on) This parameter determines whether the DL Downlink SET rate is lowered to 2_Rates, DlRateDnAdj Rate Decrease DCCC(Optional the minimum rate Enumeratio 3_Rates Level Adjust Level ) in one step or two n Type steps for BE service set up on DCH in This parameter determines whether the DL Downlink SET rate is raised to 2_Rates, DlRateUpAdj Rate Increase DCCC(Optional the maximum rate Enumeratio 3_Rates Level Adjust Level ) in one step or two n Type steps for BE service set up on DCH in
OFF,ON
2_Rates, 3_Rates
2_Rates, 3_Rates
8/7/2013
2513267
162734118.xls.ms_office1
Frequency hysteresis of downlink RSCP Qos. This parameter controls the used frequency thresholds for the inter-frequency and inter-RAT measurement based on Qos. In event mode, if ADD the interCELLQOSHO( frequency and Optional) inter-RAT Interval SET measurement Type QOSHO(Option events occurred al) for the downlink Qos reason, the used frequency threshold of the RSCP measurement quantity is equal to the used frequency threshold that is configured on the BAM server in coverage measurement plus
-15~15
-15~15
8/7/2013
2523267
162734118.xls.ms_office1
This parameter refers to the downlink spreading factor used by the RL carrying single service with the CN domain in typical D4(SF4), environment. The D8(SF8), downlink transmit D16(SF16), power parameters D32(SF32), of common ADD D64(SF64), services are CELLRLPWR( obtained by Enumeratio D128(SF12 Mandatory) n Type 8), emulation, and D256(SF25 the value of 6), [Downlink D512(SF51 spreading factor] 2) depends on such factors as service rate and puncturing limitation. For detailed information of this parameter, refer to 3GPP TS 25.433.
DlSF
8/7/2013
2533267
162734118.xls.ms_office1
This parameter determines whether the compressed mode is limited to the downlink SF. Starting the compressed mode is resource consuming for the fast-moving UEs. Whether the spreading factors of the current DCH channels SET FALSE(Not should be CMCF(Optional Enumeratio Limited), FALSE,TR considered when ) n Type TRUE(Limi UE the switch ted) controlling the start compressed mode is set. When the switch is set to FALSE, you can infer that the start compressed mode does not consider the spreading factors of the DCH channels; when the switch is set to TRUE,
DlSFLimitC MInd
Dl SF limit CM ind
8/7/2013
2543267
162734118.xls.ms_office1
CM implementation approach selection basis. When the downlink spreading factor is greater than or equal to this parameter value, the SF/2 approach will be preferred. Otherwise, the ADD high-layer CELLCMCF(O scheduling will be D8, D16, ptional) preferred. Enumeratio D32, D64, 8,16,32,64,1 SET The SF/2 n Type D128, D256 28,256 CMCF(Optional approach ) consumes more system resources and therefore this approach is recommended only for low-rate users. The highlayer scheduling requires variable multiplexing positions of transport channels and is applicable to a relatively
DL SF DlSFTurnPoi threshold nt
DL AF of DlSrbActFact SRB or
Interval Type
0~100
DL AF of R99 SET DL activity Interval DlStreamAF Streaming ADMCTRL(Op factor of the R99 Type service tional) streaming service.
0~100
8/7/2013
2553267
162734118.xls.ms_office1
This parameter specifies the default rate threshold for decision to use HS-DSCH to carry DL PS domain streaming services. When the maximum DL service rate is higher than or equal to this threshold, the service will be carried on HSDSCH. Otherwise, it will be carried on Threshold E1 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement. When the value calculated on the basis of the measurement report is higher than the upper threshold E1, AMRC lowers the DL AMR speech rate by one level. This parameter specifies the relative threshold. The absolute threshold is equal to the maximum DL TX power minus the relative threshold. The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are greater
D8, D16, D32, D64, Enumeratio D128, n Type D144, D256, D384
DlThdE1
Interval Type
0~559
8/7/2013
2563267
162734118.xls.ms_office1
Threshold E2 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement. When the value calculated on the basis of the measurement report is lower than the upper SET threshold E2, AMRC(Optiona AMRC stops l) adjusting the DL Interval SET AMR speech rate. Type AMRCWB(Opt This parameter ional) specifies the relative threshold. The absolute threshold is equal to the maximum DL TX power minus the relative threshold. The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are less
DlThdE2
0~559
8/7/2013
2573267
162734118.xls.ms_office1
Threshold F1 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement. When the value calculated on the basis of the measurement report is lower than the lower SET threshold F1, AMRC(Optiona AMRC raises the l) DL AMR speech Interval SET rate by one level. Type AMRCWB(Opt This parameter ional) specifies the relative threshold. The absolute threshold is equal to the maximum DL TX power minus the relative threshold. The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are less
DlThdF1
1~560
8/7/2013
2583267
162734118.xls.ms_office1
Threshold F2 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement. When the value calculated on the basis of the measurement report is higher than the lower SET threshold F2, AMRC(Optiona AMRC stops l) adjusting the DL Interval SET AMR speech rate. Type AMRCWB(Opt This parameter ional) specifies the relative threshold. The absolute threshold is equal to the maximum DL TX power minus the relative threshold. The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are greater
DlThdF2
1~560
8/7/2013
2593267
162734118.xls.ms_office1
When the algorithm 2 is used, this parameter defines the total equivalent user number corresponding to the 100% downlink load. he parameter should be related to the admission threshold and DL total ADD actual condition Interval DlTotalEqUs equivalent user CELLCAC(Opti of the network. If Type erNum number onal) the value is too high, the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the possibility of user rejects may increase, resulting in waste in idle resources. Duration from when the VP TX power is beyond ADD the threshold Ea CELLQUALIT or below the VP Trigger YMEAS(Option threshold Eb to Interval DlVpTrigTim Time Of Event al) when the event Ea Type eE E SET or Eb is triggered. QUALITYME This parameter is AS(Optional) used to avoid faulty reporting due to instability of power.
1~200
1~200
1~6000
10~60000, step: 10
8/7/2013
2603267
162734118.xls.ms_office1
DLYGB
This parameter Expected diff ADD specifies the Interval delay guardIMAGRP(Optio expected diff Type band nal) delay guard-band. (Unit: cells)
3~505
3~505
DomainType
PsBlk(BLO PsBlk, CK PS), Enumeratio CsAndPsBl CsAndPsBl n Type k(BLOCK k CS AND PS)
This parameter specifies whether CLOSE(Clo ADD Enumeratio se), CLOSE,OP the alarm EMU(Optional) reporting for door n Type OPEN(Ope EN access is enabled. n)
8/7/2013
2613267
162734118.xls.ms_office1
The DSP code must be input in hexadecimal format and cannot be 0. It is unique in the SS7 network. The number of the DSP code bits is equal to that of the OPC code bits. If the number of OSP code bits is ADD BIT14, the value Interval N7DPC(Mandat range of DSP Type ory) code is from H'1 to H'3FFF (1~16383).If the number of OSP code bits is BIT16, the value range of DSP code is from H'1 to H'1~H'FFFF(1~6 5535). If BIT24, the value range is from H'1 to H'FFFFFF (1~16777215).
DPC
DSP code
1~1677721 1~1677721 5 5
This parameter specifies the number of consecutive subframes that SET can be transmitted DTXDRXPAR Enumeratio D1, D2, D5 1,2,5 on the UL A(Optional) n Type DPCCH during one DtxCycle1. For details, refer to the 3GPP TS 25.331 protocol.
8/7/2013
2623267
162734118.xls.ms_office1
This parameter specifies the number of consecutive subframes that SET can be transmitted DTXDRXPAR Enumeratio D1, D2, D5 1,2,5 on the UL A(Optional) n Type DPCCH during one DtxCycle2. For details, refer to the 3GPP TS 25.331 protocol. This parameter specifies whether the DPCCH slot format 1 or DPCCH slot format 4 is used when all the SLOT_FOR SLOT_FOR SET traffic and Enumeratio MAT_1, MAT_1, FRC(Optional) signaling are n Type SLOT_FOR SLOT_FOR transmitted over MAT_4 MAT_4 the HSPA channel and when the number of feedback information (FBI) bits is 0. The DSP code must be input in divided number ADD format. In N7DPC(Mandat addition, it should String Type ory) be allocated in the SS7 network and cannot be repeated.
DPCDNF
DSP code
1~11 characters
ADD CELLSETUP(O DPCH ptional) DpchDivMod diversity mode ADD forMIMO for MIMO user NRNCCELL(O ptional)
This parameter indicates DPCH None, None, Enumeratio diversity mode for STTD, CP1 STTD, CP1 n Type MIMO user.
8/7/2013
2633267
162734118.xls.ms_office1
ADD CELLSETUP(O DPCH priority ptional) DpchPrioTxD Tx diversity ADD iversityMode mode NRNCCELL(O ptional)
DpcMode
This parameter specifies the DL power control mode. - SINGLE_TPC, a fast power control mode, indicates that a unique TPC command is sent in each timeslot on the DPCCH. TPC_TRIPLET_I SINGLE_T SINGLE_T N_SOFT, a slow PC, PC, SET power control TPC_TRIP TPC_TRIP Enumeratio FRC(Optional) mode, indicates LET_IN_S LET_IN_S n Type that the same OFT, OFT, TPC command is TPC_AUT TPC_AUT sent over three O_ADJUST O_ADJUST timeslots. It is applicable to soft handover, and it can decrease the power deviation. TPC_AUTO_AD JUST, an automatic adjustment mode, indicates that the value of
8/7/2013
2643267
162734118.xls.ms_office1
Type of the DSP. IUCS: indicating that the DSP is on the control plane or user plane of the CS domain of the Iu interface IUPS: indicating that the DSP is on the control plane of the PS domain of the Iu interface IUR: indicating an RNC signalling point ADD IUCS_ALCAP: N7DPC(Mandat indicating that the ory) DSP is on the user plane of the CS domain of the Iu interface IUCS_RANAP: indicating that the DSP is on the control plane of the CS domain of the Iu interface STP: indicating a signalling transmission point.AAL2SWIT CH:indicating an This parameter specifies the STR number of the IPLOPTST(Ma destination port of ndatory) the IP loopback test. This parameter STR specifies the IPLOPTST(Ma number of the slot ndatory) that holds the DPUb.
DPCT
DSP type
IUCS(IuCS node), IUPS(Iu-PS node), IUR(Iur node), IUCS_RAN AP(Iu-CS RANAP node), Enumeratio IUCS_ALC n Type AP(Iu-CS ALCAP node), AAL2SWIT CH(Aal2 switch node), STP(STP node)
IUCS, IUPS, IUR, IUCS_RAN AP, IUCS_ALC AP, AAL2SWIT CH, STP
DPORTNO
Interval Type
1024~3584
1024 to 3584
DPUSN
Interval Type
8~19
8 to 19
8/7/2013
2653267
162734118.xls.ms_office1
DPX
DSP index
ADD N7DPC(Mandat ory) ADD M3DE(Mandato ry) ADD MTP3LKS(Man datory) ADD ADJNODE(Ma ndatory) ADD CNNODE(Man datory) ADD NRNC(Mandat ory) ADD MTP3RT(Mand atory)
0~118
0~118
DR
Activation direction
This parameter ACT specifies the SINK, VCLCC(Option direction of Enumeratio SOURCE, al) activating the n Type BOTH check on a VCL.
8/7/2013
2663267
162734118.xls.ms_office1
Dynamic resource allocation switch. 1) DRA_AQM_SWI TCH: When the switch is on, the active queue management algorithm is used for the RNC. 2) DRA_BE_EDCH _TTI_RECFG_S WITCH: When the switch is on, the TTI could be reconfigured to HSUPA traffic dynamically between 2ms and 10ms. 3) DRA_BE_RATE _DOWN_BF_HO _SWITCH: When the switch is on, the bandwidth for BE services is reduced before soft handover. It is recommended This parameter is used as the DRD Ec/No threshold of whether to perform the blind handover. This parameter is used as the DRD Ec/No threshold of whether to perform the blind handover. When choosing a DRD candidate cell, if the Ec/No value of the current cell is greater than the threshold of interRAT/interfrequency neighboring cell, the DRD is permitted.
DraSwitch
DRA_AQM _SWITCH, DRA_BE_E DCH_TTI_ RECFG_S WITCH, DRA_BE_ RATE_DO WN_BF_H O_SWITC H, DRA_DCC C_SWITCH , DRA_HSD PA_DL_FL OW_CONT ROL_SWIT CH, DRA_HSD PA_STATE _TRANS_S WITCH, DRA_HSU PA_DCCC_ SWITCH, DRA_HSU PA_STATE _TRANS_S WITCH, DRA_IU_Q
DRA_AQM _SWITCH, DRA_BE_E DCH_TTI_ RECFG_S WITCH, DRA_BE_ RATE_DO WN_BF_H O_SWITC H, DRA_DCC C_SWITCH , DRA_HSD PA_DL_FL OW_CONT ROL_SWIT CH, DRA_HSD PA_STATE _TRANS_S WITCH, DRA_HSU PA_DCCC_ SWITCH, DRA_HSU PA_STATE _TRANS_S WITCH, DRA_IU_Q
Interval Type
-24~0
12~0,Step:0 .5
8/7/2013
2673267
162734118.xls.ms_office1
A timer to SET DRNC wait for STATETIMER( AAL2 setup Optional) indication.
Interval Type
1~10000
1~10000
A timer to DRL SET DRNC wait for DrlRecfgCmit reconfiguration STATETIMER( radio link Tmr commit timer Optional) reconfiguration commit.
Interval Type
1~10000
1~10000
This parameter specifies the maximum number of inter-RAT RAB directed retries. It decides SET the size of the DRD(Optional) candidate set for Interval ADD inter-RAT DRD. Type CELLDRD(Opt The value 0 ional) indicates that inter-RAT RAB DRD is not applicable. This parameter can be cell-oriented.
0~5
0~5
If the parameter is set to YES, QoS control for SET DL BE services QOSACT(Optio based on RLC Enumeratio NO, YES nal) retransmission n Type can be performed when the best cell is in the DRNC.
NO, YES
8/7/2013
2683267
162734118.xls.ms_office1
When the buffer duration of queue 0 is larger than or equal to the value of this parameter, packets begin to ADD Packet discard be discarded. PORTFLOWC Interval DROPPKTT threshold of When the port TRLPARA(Opt Type HD0 queue 0 flow control type ional) is ATM, this parameter specifies the packet discard threshold of the CBR queue.
10~150
10 to 150
When the buffer duration of queue 1 is larger than or equal to the value of this parameter, packets begin to ADD Packet discard be discarded. PORTFLOWC Interval DROPPKTT threshold of When the port TRLPARA(Opt Type HD1 queue 1 flow control type ional) is ATM, this parameter specifies the packet discard threshold of the RTVBR queue.
10~150
10 to 150
8/7/2013
2693267
162734118.xls.ms_office1
When the buffer duration of queue 2 is larger than or equal to the value of this parameter, packets begin to ADD Packet discard be discarded. PORTFLOWC Interval DROPPKTT threshold of When the port TRLPARA(Opt Type HD2 queue 2 flow control type ional) is ATM, this parameter specifies the packet discard threshold of the NRTVBR queue.
10~150
10 to 150
When the buffer duration of queue 3 is larger than or equal to the value of this parameter, packets begin to ADD Packet discard be discarded. PORTFLOWC Interval DROPPKTT threshold of When the port TRLPARA(Opt Type HD3 queue 3 flow control type ional) is ATM, this parameter specifies the packet discard threshold of the UBR queue.
10~150
10 to 150
8/7/2013
2703267
162734118.xls.ms_office1
When the buffer duration of queue 4 is larger than or equal to the value of this parameter, packets begin to ADD Packet discard be discarded. PORTFLOWC Interval DROPPKTT threshold of When the port TRLPARA(Opt Type HD4 queue 4 flow control type ional) is ATM, this parameter specifies the packet discard threshold of the UBR+ queue.
10~150
10 to 150
8/7/2013
2713267
162734118.xls.ms_office1
When the buffer duration of queue ADD Packet discard 5 is larger than or PORTFLOWC Interval DROPPKTT threshold of equal to the value TRLPARA(Opt Type HD5 queue 5 of this parameter, ional) packets begin to be discarded.
10~150
10 to 150
8/7/2013
2723267
162734118.xls.ms_office1
Direct retry switch. 1) DR_RRC_DRD_ SWITCH(DRD switch for RRC connection): When the switch is on, DRD and redirection is performed for RRC connection if retry is required. SET 2) CORRMALGO DR_RAB_SING_ SWITCH(Optio DRD_SWITCH( nal) DRD switch for single RAB): When the switch is on, DRD is performed for single service if retry is required. 3) DR_RAB_COM B_DRD_SWITC H(DRD switch for combine RAB): When the switch is on, DRD is This parameter specifies the size of patterns (that is, the number of SET subframes) that DTXDRXPAR can be received A(Optional) on the HS-SCCH. For details, refer to the 3GPP TS 25.331 protocol.
DrSwitch
DrxCycle
DRX Cycle
4,5,8,10,16, 20
8/7/2013
2733267
162734118.xls.ms_office1
CN domain specific DRX cycle length ADD coefficient Interval CNDOMAIN(O broadcast on Type ptional) SIB1 and used by UEs in Idle Mode.
6~9
6~9
This parameter specifies the UTRAN-specific Discontinuous Reception (DRX) cycle length coefficient. In connected mode, the UE uses the shorter one between CNspecific DRX cycle length coefficient and UTRAN-specific SET DRX cycle length Interval FRC(Optional) coefficient. In Type idle mode, the UE can use the DRX mode to receive paging indications so as to reduce power consumption; in this case, the UE needs to monitor only one paging indication in one paging occasion during each DRX cycle. - If the value of
3~9
3~9
8/7/2013
2743267
162734118.xls.ms_office1
This parameter specifies whether the UE should monitor the transmission on the E-AGCH in the serving EDCH cell and the transmission on each E-RGCH in the serving EDCH radio link set if the data reception on the HS-SCCH overlaps with the data reception on the E-AGCH and on the E-RGCH. The value of this parameter is a Boolean value. For details, refer to the 3GPP TS This parameter specifies whether the parameters related to the DRX are valid. The parameters related to the DRX are optional and they can be set only when the parameters related to the DTX are set. Value OFF indicates that the parameters are invalid and cannot be set. Value ON indicates that the parameters are valid. This parameter specifies the number of the E1/T1 port bearing the PPP link.
FALSE,TR UE
Drxvalid
OFF,ON
DS1
Interval Type
0~31
0 to 31
8/7/2013
2753267
162734118.xls.ms_office1
Whether to SET enable the DSACAUTOA automatically LGO(Optional) triggered DSAC algorithm.
OFF,ON
DSCP
PING IP(Optional) SET DSCPMAP(Ma Differentiated ndatory) services code ADD point SCTPLNK(Opti onal) SET PHBMAP(Man datory) Dsp No.
This parameter specifies the Interval DiffServ Code Type Point for the ping command.
0~63
0 to 63
DSPNO
STR This parameter Interval IPLOPTST(Ma specifies the Type ndatory) number of a DSP.
0~21
0 to 21
DST
DaylightSave
SET TZ(Optional)
This parameter specifies whether Enumeratio YES, NO the DST is used. n Type
YES, NO
This parameter specifies the destination end of ADD Interval timeslot cross TSCROSS(Man Type connection, datory) corresponding to the electrical port of the board.
0~31
0 to 31
8/7/2013
2763267
162734118.xls.ms_office1
DSTIP
ADD IPRT(Mandator y) ADD Destination IP IPRTBIND(Ma address ndatory) ADD FLOW(Mandat ory)
IP Address Type
0.0.0.0~255 .255.255.25 5
DSTMASK
ADD This parameter IP Address IPRT(Mandator specifies a subnet Type y) mask. ADD This parameter IPRTBIND(Ma specifies the ndatory) subnet mask. IP Address Type
DSTMASK
8/7/2013
2773267
162734118.xls.ms_office1
DSTTSN
DtxCycle1
DtxCycle2
TS1(Time_s lot_1), TS2(Time_s lot_2), TS3(Time_s lot_3), TS4(Time_s lot_4), TS5(Time_s lot_5), TS6(Time_s lot_6), This parameter TS7(Time_s specifies the lot_7), ADD number of the TS8(Time_s TSCROSS(Man Enumeratio destination end of lot_8), datory) n Type timeslot cross TS9(Time_s connection. lot_9), TS10(Time _slot_10), TS11(Time _slot_11), TS12(Time _slot_12), TS13(Time _slot_13), TS14(Time _slot_14), TS15(Time _slot_15), TS16(Time This parameter specifies the size D1, D4, of pattern 1 SET D5, D8, transmitted on the DTXDRXPAR Enumeratio D10, D16, UL DPCCH. For A(Optional) n Type D20 details, refer to the 3GPP TS 25.331 protocol. This parameter D4, D5, specifies the size D8, D10, of pattern 2 SET D16, D20, transmitted on the DTXDRXPAR Enumeratio D32, D40, UL DPCCH. For A(Optional) n Type D64, D80, details, refer to D128, D160 the 3GPP TS 25.331 protocol.
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
1,4,5,8,10,1 6,20
8/7/2013
2783267
162734118.xls.ms_office1
This parameter specifies the delay time for delay time of SET DTX DRX being DtxDrxEnabli DTX_DRX in FRC(Optional) effective after it is ngDelay action enabled. For details, see 3GPP TS 25.331. If the interval at which two consecutive patterns are transmitted on the UL DPCCH is DtxCycle2, a certain number of timeslots should SET Long DPCCH be transmitted DtxLongPrea DTXDRXPAR Preamble before data is mble A(Optional) transmitted on the DPCCH. This parameter specifies the number of timeslots. For details, refer to the 3GPP TS 25.331 protocol. This parameter specifies whether the parameters related to the DTX are valid. Value OFF DTX SET indicates that the Dtxvalid Parameter DTXDRXPAR parameters are Switch A(Optional) invalid and cannot be set. Value ON indicates that the parameters are valid.
D0, D1, 0, 1, 2, 4, 8, D2, D4, D8, Enumeratio 16, 32, 64, D16, D32, n Type 128 D64, D128
2,4,15
OFF,ON
8/7/2013
2793267
162734118.xls.ms_office1
DUPLEX
This parameter specifies the duplex mode of the transmission Half(Half SET over the Ethernet duplex), Duplex Mode ETHPORT(Opti port. This Enumeratio Full(Full onal) parameter can be n Type duplex) set only when "Auto negotiation" is set to DISABLE.
Period Timer Length For DynCellOpen Cell Dynamic JudgeTimerle ShutDown n feature
When the cell is automatically shut down, this SET parameter is used RNCCELLSHU to repeatedly Interval TDOWNPARA determine Type (Optional) whether the cell needs to be automatically enabled.
1~3600
1~3600
When the cell is automatically Protect Timer SET enabled, the cell Length For DynCellShutd RNCCELLSHU can be Interval Cell Dynamic ownProtectTi TDOWNPARA automatically Type ShutDown merlen (Optional) disabled again feature only after a period delay.
60~3600
60~3600
When the switch is on, the Cell dynamic shutdown algorithm of the Cell Dynamic SET OFF(switch local RNC cell is ShutDown RNCCELLSHU off), DynCellShut Enumeratio OFF, ON enabled. When Switch For TDOWNPARA ON(switch DownSwitch the switch is off, n Type RNC (Optional) on) the Cell dynamic shutdown algorithm of the local RNC cell is disabled.
8/7/2013
2803267
162734118.xls.ms_office1
OFF(switch off), When the switch ON_1(switc is on, the "Cell h on1), dynamic Enumeratio ON_2(switc shutdown" feature n Type h on2), is valid. ON_3(switc h on3) When DynShutDownTy pe is set to ForceShutDown, the cell will shut FORCESH down in the UTDOWN( shutdown time ForceShutD interval. When own), Enumeratio DynShutDownTy CONDITIO n Type pe is set to NALSHUT ConditionalShutD DOWN(Co own, the cell will nditionalSh shut down with utDown) some conditions in the shutdown time interval. This parameter specifies the number of the Interval 0~31 E1/T1 link that Type carries the fractional ATM/IMA link. Period of E-DCH throughput ratio measurement. This parameter specifies the period of E-DCH throughput ratio measurement. The throughput Interval 1~10000 ratio over the EType DCH is periodically measured to implement state transition from EDCH to FACH and DCCC algorithm on EDCH.
ADD Cell Dynamic CELLDYNSHU DynShutdown ShutDown TDOWN(Mand Switch Switch atory)
ADD Cell Dynamic CELLDYNSHU DynShutDow ShutDown TDOWN(Optio nType Type nal)
E1T1LNKN
0 to 31
8/7/2013
2813267
162734118.xls.ms_office1
Number of pending periods after the throughput ratio event 4B for state transition from EDCH to FACH is triggered. This E-DCH2F 4B SET parameter is used E2FThrouPT Pending Period UESTATETRA to prevent too AT Amount NS(Optional) many throughput ratio events 4B being reported. Pending time after the throughput ratio event 4B is triggered = value of this parameter This parameter is used to check whether the UE in the low activity state. If the UE is SET on the E-DCH E-DCH2F 4B UESTATETRA channel, the low E2FThrouThd Threshold NS(Optional) activity counter increases by 1 every time throughput ratio event 4B is reported.
Interval Type
0~1023
0~1023
Interval Type
0~384
0~384
8/7/2013
2823267
162734118.xls.ms_office1
Number of periods before the throughput ratio event 4B for state transition from EDCH to FACH is triggered. When the throughput ratio is below the lower threshold and remains so for the period specified by this parameter, the SET event 4B is E-DCH2F 4B E2FThrouTim UESTATETRA reported. This Period Amount eToTrig NS(Optional) parameter prevents unnecessary throughput ratio events that are caused by throughput ratio instability from being triggered. Time to trigger the throughput ratio event 4B = value of this parameter x 10 ms. The parameter specifies the number of codes (SF=256) used by the E-DCH Absolute Grant Channel (EAGCH). If the parameter value is ADD set too high, the Code Number EagchCodeN CELLHSUPA( downlink codes for E-AGCH um Optional) are wasted. If the parameter value is set too low, the uplink throughput of the HSUPA is restricted. For details about this parameter, refer to 3GPP TS 25.433.
Interval Type
0~1023
0~1023
Interval Type
1~8
1~8
8/7/2013
2833267
162734118.xls.ms_office1
ECHOIP
Check IP address
Check IP address. The IP address to be checked must be ADD within the IP Address IPPATH(Manda network segment Type tory) specified by [Peer IP address] and [Peer subnet mask].
0.0.0.0~255 .255.255.25 5
This parameter is used to count the adjusted step of Ec/N0 in the link quality adjust algorithm for EFACH. This parameter specifies the adjustment cycle of Ec/N0. This parameter is also used to determine the measurement period of the RLC retransmissions in the link quality adjust algorithm for E-FACH.
Interval Type
0~5000
Interval Type
1~1000
10~10000, step: 10
8/7/2013
2843267
162734118.xls.ms_office1
This parameter specifies the time duration when the reported Ec/N0 is valid. The reported Ec/N0 is valid for the period (starting SET from the time FRC(Optional) when the RRC Interval ADD connection Type CELLFRC(Opti request is onal) initiated) specified by this parameter. Check whether the reported Ec/N0 is valid before comparing it with EcN0Ths.
0~65535
0~65535
This parameter specifies the maximum value that Ec/N0 can be stepped down in the link quality adjust algorithm for E-FACH. This parameter specifies the maximum value that Ec/N0 can be stepped up in the link quality adjust algorithm for EFACH.
Interval Type
0~5000
Interval Type
0~5000
8/7/2013
2853267
162734118.xls.ms_office1
EcN0Ths
Ec/N0 threshold
This parameter specifies the threshold for determining the signal quality in a SET cell. If the FRC(Optional) reported Ec/N0 Interval ADD exceeds the value Type CELLFRC(Opti of this parameter, onal) you can infer that the signal quality in the cell is good and a high code rate can be set for initial access.
0~49
-24.5~0
8/7/2013
2863267
162734118.xls.ms_office1
EDAY
End date
This parameter specifies the end SET date of the DST. Interval TZ(Mandatory) The value 30 and Type 31 is invalid in February.
1~31
1 to 31
This parameter specifies the first ADD MAC-d PDU size E-DCH MACInterval EdchMacdPd TYPRABHSPA used by HSUPA D PDU size1 Type uSize1 (Optional) services. The size must be a multiple of 8 bits.
1~5000
1~5000
8/7/2013
2873267
162734118.xls.ms_office1
This parameter specifies the tenth ADD MAC-d PDU size E-DCH MACInterval EdchMacdPd TYPRABHSPA used by HSUPA D PDU size10 Type uSize10 (Optional) services. The size must be a multiple of 8 bits.
1~5000
1~5000
This parameter specifies the eleventh MAC-d ADD E-DCH MACPDU size used by Interval EdchMacdPd TYPRABHSPA D PDU size11 HSUPA services. Type uSize11 (Optional) The size must be a multiple of 8 bits.
1~5000
1~5000
8/7/2013
2883267
162734118.xls.ms_office1
This parameter specifies the twelfth MAC-d ADD E-DCH MACPDU size used by Interval EdchMacdPd TYPRABHSPA D PDU size12 HSUPA services. Type uSize12 (Optional) The size must be a multiple of 8 bits.
1~5000
1~5000
This parameter specifies the second MAC-d ADD E-DCH MACPDU size used by Interval EdchMacdPd TYPRABHSPA D PDU size2 HSUPA services. Type uSize2 (Optional) The size must be a multiple of 8 bits.
1~5000
1~5000
8/7/2013
2893267
162734118.xls.ms_office1
This parameter specifies the third ADD MAC-d PDU size E-DCH MACInterval EdchMacdPd TYPRABHSPA used by HSUPA D PDU size3 Type uSize3 (Optional) services. The size must be a multiple of 8 bits.
1~5000
1~5000
This parameter specifies the fourth MAC-d ADD E-DCH MACPDU size used by Interval EdchMacdPd TYPRABHSPA D PDU size4 HSUPA services. Type uSize4 (Optional) The size must be a multiple of 8 bits.
1~5000
1~5000
8/7/2013
2903267
162734118.xls.ms_office1
This parameter specifies the fifth ADD MAC-d PDU size E-DCH MACInterval EdchMacdPd TYPRABHSPA used by HSUPA D PDU size5 Type uSize5 (Optional) services. The size must be a multiple of 8 bits.
1~5000
1~5000
This parameter specifies the sixth ADD MAC-d PDU size E-DCH MACInterval EdchMacdPd TYPRABHSPA used by HSUPA D PDU size6 Type uSize6 (Optional) services. The size must be a multiple of 8 bits.
1~5000
1~5000
8/7/2013
2913267
162734118.xls.ms_office1
This parameter specifies the seventh MAC-d ADD E-DCH MACPDU size used by Interval EdchMacdPd TYPRABHSPA D PDU size7 HSUPA services. Type uSize7 (Optional) The size must be a multiple of 8 bits.
1~5000
1~5000
This parameter specifies the eighth MAC-d ADD E-DCH MACPDU size used by Interval EdchMacdPd TYPRABHSPA D PDU size8 HSUPA services. Type uSize8 (Optional) The size must be a multiple of 8 bits.
1~5000
1~5000
8/7/2013
2923267
162734118.xls.ms_office1
This parameter specifies the ninth ADD MAC-d PDU size E-DCH MACInterval EdchMacdPd TYPRABHSPA used by HSUPA D PDU size9 Type uSize9 (Optional) services. The size must be a multiple of 8 bits.
1~5000
1~5000
This parameter specifies the number of sizes of E-DCH MACd PDUs. D1, D2, The Number ADD Currently, only D3, D4, D5, 1, 2, 3, 4, 5, of E-DCH EdchMacdPd TYPRABHSPA VoIP services can Enumeratio D6, D7, D8, 6, 7, 8, 9, MAC-D PDU uSizeNum (Optional) be configured n Type D9, D10, 10, 11, 12 Size with multiple D11, D12 PDU sizes. Other services can have only one PDU size.
8/7/2013
2933267
162734118.xls.ms_office1
This parameter specifies the number of measurement periods during which no event 4A related to EDCH throughput is reported again after such an event 4A is reported. This parameter is set to avoid too many channel ADD reconfiguration Interval TYPRABDCC operations. The Type CMC(Optional) larger the value of this parameter, the longer the time from the last reporting of throughputrelated event 4A on E-DCH to the next reporting, and the smaller the possibility of triggering throughputrelated event 4A on E-DCH.
0~1023
0~1023
8/7/2013
2943267
162734118.xls.ms_office1
This parameter specifies the number of measurement periods during which no event 4B related to EDCH throughput is reported again after such an event 4B is reported. This parameter is set to avoid too many channel ADD reconfiguration Interval TYPRABDCC operations. The Type CMC(Optional) larger the value of this parameter, the longer the time from the last reporting of throughputrelated event 4B on E-DCH to the next reporting, and the smaller the possibility of triggering throughputrelated event 4B on E-DCH.
0~1023
0~1023
8/7/2013
2953267
162734118.xls.ms_office1
HSUPA UL rate adjustment set. It SET contains rates for EDCHRATEA Bit Field rate adjustment DJUSTSET(Opt Type and is used in the ional) HSUPA DCCC algorithm.
RATE_8KB PS, RATE_16K BPS, RATE_32K BPS, RATE_64K BPS, RATE_128 KBPS, RATE_144 KBPS, RATE_256 KBPS, RATE_384 KBPS, RATE_608 KBPS, RATE_144 0KBPS, RATE_204 8KBPS, RATE_288 0KBPS, RATE_574 0KBPS
8, 16, 32, 64, 128, 144, 256, 384, 608, 1440, 2048, 2880, 5740
This parameter specifies the maximum Maximum E- ADD allowed SIR Interval EdchSirMaxD DCH SIR TYPRABOLPC decrease step for Type ownStep decrease step (Mandatory) HSUPA within an adjustment period of outer-loop power control.
0~5000
8/7/2013
2963267
162734118.xls.ms_office1
The large target Edch Target ADD retransmit times EdchTargetLa Large Number Interval TYPRABOLPC for E-DCH MACrgeRetransNu of E-DCH Type (Mandatory) ES PDU used to m PDU retransfer bear the service.
0~15000
0~15, step:0.001
Edch Little ADD EdchTargetLi Target Number TYPRABOLPC ttleRetransNu of E-DCH (Mandatory) m PDU retransfer
The little target retransmit times for E-DCH MAC- Interval ES PDU used to Type the normal service.
0~15000
0~15, step:0.001
8/7/2013
2973267
162734118.xls.ms_office1
This parameter specifies the number of measurement periods from the moment when the E-DCH rate exceeds the 4A threshold to the moment when the throughputrelated event 4A on E-DCH is triggered. This parameter is used ADD to avoid Interval TYPRABDCC unnecessary Type CMC(Optional) reports triggered by E-DCH uplink throughput fluctuation. The larger the value of this parameter, the longer the required duration of the E-DCH uplink throughput exceeding the 4A threshold, and the smaller the possibility of triggering
0~1023
0~1023
8/7/2013
2983267
162734118.xls.ms_office1
This parameter specifies the number of measurement periods from the moment when the E-DCH rate falls below the 4B threshold to the moment when the throughputrelated event 4B on E-DCH is triggered. This parameter is set to ADD avoid unnecessary Interval TYPRABDCC reports triggered Type CMC(Optional) by E-DCH uplink throughput fluctuation. The larger the value of this parameter, the longer the required duration of the E-DCH uplink throughput keeping below the 4B threshold, and the smaller the possibility of triggering throughput-
0~1023
0~1023
SET This parameter EdchTtiType Edch TTI type DTXDRXPAR specifies the EA(Mandatory) DCH TTI type.
8/7/2013
2993267
162734118.xls.ms_office1
EFACHDL
EFACH ADD EFACH channel Interval channel TRMFACTOR( forward factor. Type forward factor Optional)
0~100
0~100
This parameter specifies the ADD minimum EFACH EFACHDTC CELLEFACH( guaranteed power DTCH GBP HGBP Optional) of the DTCH mapped onto the EFACH. E_FACH support indicator. When ADD the indicator is EFachSupInd EFachSupInd NRNCCELL(M TRUE, it andatory) indicates that the cell supports E_FACH.
Interval Type
-350~150
35~15,step: 0.1
FALSE,TR UE
8/7/2013
3003267
162734118.xls.ms_office1
This parameter specifies whether the RRC connection is established preferentially on the E-FACH. If this parameter is set to ON and both the UE and the serving cell support E-FACH, then the RRC connection is switch for established SET RRC preferentially on EFachSwitch RRCESTCAUS Enumeratio OFF, ON established on the E-FACH, E(Optional) n Type E_FACH regardless of the setting of SigChType. According to the related protocols, the UE cannot transmit signals over the FACH if both the UE and the cell support EFACH. Thus, if this parameter is set to OFF and both the UE and the serving cell
OFF, ON
8/7/2013
3013267
162734118.xls.ms_office1
This parameter specifies whether the compressed mode can be enabled for the HSPA+ service. When the parameter is set to TRUE, the compressed mode can be enabled for the HSPA+ service. When the parameter is set to FALSE, the CM SET uplink and EHSPACMPe permission ind CMCF(Optional downlink must rmissionInd on HSPA+ ) return to the DCH before the compressed mode is enabled on for the HSPA+ service. This switch is set for compatibility with the HSPA+ terminals that might exist in the network because these terminals do not support the enabled This parameter specifies the type of the end date. DATE indicates that the DST starts from a certain day. SET WEEK indicates EM EndType TZ(Mandatory) that the DST starts from a certain week. DATEWEEK indicates that the DST starts from a certain day in a certain week.
8/7/2013
3023267
162734118.xls.ms_office1
When the switch is enabled, users of emergency call can preempt all the users of non emergency call. Preemptvulner SET When the switch ability for QUEUEPREE is disabled, users Enumeratio OFF, ON Emergency call MPT(Optional) of emergency call n Type switch can only preempt users of non emergency call with the preempted attributes. It indicates whether verification is needed in the case of establishment of a signalling link in a link set. ADD The value ON MTP3LKS(Opti indicates that Enumeratio OFF, ON onal) verification is not n Type needed in an emergency. The value OFF indicates that verification is needed in a common case. This parameter specifies whether the RNC specially handles the LCS requests of emergency calls. SET In other words, SMLC(Optional Enumeratio OFF, ON the RNC provides ) n Type highly accurate location for emergency calls regardless of license constraints.
EmcPreeRef VulnSwitch
OFF, ON
OFF, ON
OFF, ON
8/7/2013
3033267
162734118.xls.ms_office1
EMONTH
End month
EMSIP
EMS IP Address
JAN(Januar y), FEB(Februa ry), MAR(Marc h), APR(April), MAY(May) This parameter , SET specifies the end JUN(June), Enumeratio TZ(Mandatory) month of the JUL(July), n Type DST. AUG(Augu st), SEP(Septe mber), OCT(Octob er), NOV(Nove mber), DEC(Dece mber) This parameter ADD specifies the IP IP Address EMSIP(Mandat address for the Type ory) EMS. The encryption algorithm supported by SET Bit Field UEA0, RNC. Both UEA0 UEA(Optional) Type UEA1 and UEA1 can be selected at one time.
JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC
0.0.0.0~255 .255.255.25 5 For each switch of this parameter, the value can be: ON or OFF.
EndTime1
End time of the ADD first interval when CELLDYNSHU Compound HOUR, the "Cell dynamic TDOWN(Mand Type MIN shutdown" feature atory) is valid.
00:00~23:5 9
EndTime2
End time of the second interval when the "Cell Compound HOUR, dynamic Type MIN shutdown" feature is valid.
00:00~23:5 9
8/7/2013
3043267
162734118.xls.ms_office1
EndTime3
End time of the third interval when the "Cell Compound HOUR, dynamic Type MIN shutdown" feature is valid.
00:00~23:5 9
ENTITYT
ACT Err Frmae Cyc ERFAMPRD ETHOAMAH( Event Para EventPara Optional)
ACT Err Frmae Cyc ERFAMPRD ETHOAMAH( Event Prid EventPrid Optional)
ACT Err Frmae Sec ERFAMSCD ETHOAMAH( Event Para EventPara Optional)
M3UA_SG P(M3UA SPG), M3UA_IPS Type of the P(M3UA M3UA Enumeratio IPSP), destination entity. n Type M3UA_SS7 SP(M3UA SS7SP), M3UA_SP( M3UA SP) This parameter specifies the number of Interval 1~1000 detected error Type frames received in error frame events. This parameter specifies the Interval 1~60 period of Type detecting error frame events. This parameter specifies the number of Interval 1~1000 detected error Type frames received in error frame events. This parameter specifies the Interval 1~4294967 period of Type 295 detecting error frame events. This parameter specifies the number of Interval 1~900 detected error Type frames received in error frame events.
1 to 1000
1 to 60
1 to 1000
1 to 4294967295
1 to 900
8/7/2013
3053267
162734118.xls.ms_office1
This parameter ACT specifies the Err Frmae Sec Interval ERFAMSCD ETHOAMAH( period of Event Prid Type EventPrid Optional) detecting error frame events. The parameter specifies the number of codes (SF=128) used by the E-DCH Relative Grant Channel (ERGCH)/E-DCH Hybrid ARQ Indicator Channel (E-HICH). The ERGCH is used to adjust the uplink power available for the UE. The ECode Number ADD HICH is used to Interval ErgchEhichC for E-RGCH/E- CELLHSUPA( provide feedback Type odeNum HICH Optional) on the ACK/NACK information, which indicates whether the data that the RNC receives from the E-DCH is correct or not. The ERGCH and EHICH are dedicated channels shared by multiple UEs. They share the AAL2 connection establishment indication timer.This timer Establishment SET is started when an Interval indication AAL2TMR(Opt AAL2 signaling ESTINDTMR Type timer ional) entity sends the service user an indication for establishing an AAL2 connection.
10~900
10 to 900
1~8
1~8
5000~3000 5000~3000 0 0
8/7/2013
3063267
162734118.xls.ms_office1
AAL2 connection establishment request timer.This timer is started SET Establishment Interval when an AAL2 ESTREQTM AAL2TMR(Opt request timer signaling entity Type R ional) sends the peer node a request for establishing an AAL2 connection.
5000~3000 5000~3000 0 0
ET
EndTime
This parameter SET Compound HOUR, specifies the end TZ(Mandatory) Type MIN, SEC time of the DST.
D16, D32, D64, D128, This parameter D256, specifies the D512, threshold to D1024, trigger event 4A D2K, D3K, related to DCH D4K, D6K, traffic volume, D8K, that is, the upper ADD D12K, limit of the traffic TYPRABDCC Enumeratio D16K, volume. The CMC(Optional) n Type D24K, larger the value of D32K, this parameter, D48K, the smaller the D64K, possibility of D96K, triggering trafficD128K, related event 4A D192K, on DCH. D256K, D384K,
16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K, 24K, 32K, 48K, 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K
8/7/2013
3073267
162734118.xls.ms_office1
D8, D16, D32, D64, This parameter D128, specifies the D256, threshold to D512, trigger event 4B D1024, related to DCH D2K, D3K, traffic volume, D4K, D6K, ADD that is, the lower D8K, TYPRABDCC limit of the traffic Enumeratio D12K, CMC(Mandator volume. The n Type D16K, y) smaller the value D24K, of this parameter, D32K, the smaller the D48K, possibility of D64K, triggering trafficD96K, related event 4B D128K, on DCH. D192K, D256K,
8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K, 24K, 32K, 48K, 64K, 96K, 128K, 192K, 256K, 384K, 512K
This parameter specifies the event A reporting period. It refers to ADD Event A report the delay from the Interval EventAReport TYPRABRLC( delay moment when Type Delay Optional) event A is triggered to the moment when the event is reported.
0~1000
0~100, step: 10
EventAThred
Event A threshold
This parameter specifies the threshold of event ADD A, that is, the Interval TYPRABRLC( upper limit of Type Optional) RLC retransmission ratio.
0~1000
8/7/2013
3083267
162734118.xls.ms_office1
EventBThred
Event B threshold
This parameter specifies the threshold of event ADD B, that is, the Interval TYPRABRLC( lower limit of Type Optional) RLC retransmission ratio.
0~1000
EWEEK
End week
SUN(Sunda y), MON(Mon day), TUE(Tuesd This parameter ay), SET specifies the DST Enumeratio WED(Wedn TZ(Mandatory) start day in a n Type esday), week. THU(Thurs day), FRI(Friday) , SAT(Saturd ay)
8/7/2013
3093267
162734118.xls.ms_office1
EWSEQ
FIRST(First ), This parameter SECOND(S SET specifies the DST econd), Enumeratio TZ(Mandatory) end week in a THIRD(Thi n Type month. rd), FOURTH(F ourth), LAST(Last)
This parameter specifies the upper threshold ADD for signal output String Type EMU(Optional) of external analog 1(unit:ampere/vol t). This parameter specifies the lower threshold ADD for signal output String Type EMU(Optional) of external analog 1(unit:ampere/vol t). This parameter VOLTAGE ADD specifies the Enumeratio (Voltage), EMU(Optional) sensor type of n Type CURRENT( external analog 1. Current) This parameter specifies the ADD upper threshold String Type EMU(Optional) for measurement range of external analog 1. This parameter specifies the ADD lower threshold String Type EMU(Optional) for measurement range of external analog 1.
1~9 character
1~9 character
Sensor Type EX_ANO1_T of External YPE Analog 1 Upper Limit of Measurement EX_ANO1_V Range of AL_MAX External Analog 1 Lower Limit of Measurement EX_ANO1_V Range of AL_MIN External Analog 1
VOLTAGE, CURRENT
1~9 character
1~9 character
8/7/2013
3103267
162734118.xls.ms_office1
This parameter specifies the upper threshold ADD for signal output String Type EMU(Optional) of external analog 2(unit:ampere/vol t). This parameter specifies the lower threshold ADD for signal output String Type EMU(Optional) of external analog 2(unit:ampere/vol t). This parameter VOLTAGE ADD specifies the Enumeratio (Voltage), EMU(Optional) sensor type of n Type CURRENT( external analog 2. Current) This parameter specifies the ADD upper threshold String Type EMU(Optional) for measurement range of external analog 2. This parameter specifies the ADD lower threshold String Type EMU(Optional) for measurement range of external analog 2. This parameter specifies the upper threshold ADD for signal output String Type EMU(Optional) of external analog 3(unit:ampere/vol t). This parameter specifies the lower threshold ADD for signal output String Type EMU(Optional) of external analog 3(unit:ampere/vol t).
1~9 character
1~9 character
Sensor Type EX_ANO2_T of External YPE Analog 2 Upper Limit of Measurement EX_ANO2_V Range of AL_MAX External Analog 2 Lower Limit of Measurement EX_ANO2_V Range of AL_MIN External Analog 2 Upper Limit of Signal EX_ANO3_S Output of IG_MAX External Analog 3
VOLTAGE, CURRENT
1~9 character
1~9 character
1~9 character
1~9 character
This parameter VOLTAGE ADD specifies the Enumeratio (Voltage), VOLTAGE, EMU(Optional) sensor type of n Type CURRENT( CURRENT external analog 3. Current)
8/7/2013
3113267
162734118.xls.ms_office1
Upper Limit of Measurement EX_ANO3_V Range of AL_MAX External Analog 3 Lower Limit of Measurement EX_ANO3_V Range of AL_MIN External Analog 3 Upper Limit of Signal EX_ANO4_S Output of IG_MAX External Analog 4 This parameter specifies the upper threshold for measurement range of external analog 3. This parameter specifies the lower threshold for measurement range of external analog 3. This parameter specifies the upper threshold for signal output of external analog 4(unit:ampere/vol t). This parameter specifies the lower threshold for signal output of external analog 4(unit:ampere/vol t).
ADD EMU(Optional)
String Type -
1~9 character
ADD EMU(Optional)
String Type -
1~9 character
ADD EMU(Optional)
String Type -
1~9 character
ADD EMU(Optional)
String Type -
1~9 character
This parameter VOLTAGE ADD specifies the Enumeratio (Voltage), EMU(Optional) sensor type of n Type CURRENT( external analog 4. Current) Upper Limit This parameter of specifies the Measurement ADD upper threshold EX_ANO4_V String Type EMU(Optional) for measurement Range of AL_MAX External range of external Analog 4 analog 4. Lower Limit This parameter of specifies the Measurement ADD lower threshold EX_ANO4_V String Type EMU(Optional) for measurement Range of AL_MIN External range of external Analog 4 analog 4. Pending time after the traffic D250, volume event 4B D500, SET is reported. This D1000, BE F2P 4B F2PTvmPTA UESTATETRA parameter is used Enumeratio D2000, Pending Time T NS(Optional) to prevent too n Type D4000, many traffic D8000, volume events 4B D16000 being reported. Sensor Type EX_ANO4_T of External YPE Analog 4
VOLTAGE, CURRENT
1~9 character
1~9 character
8/7/2013
3123267
162734118.xls.ms_office1
When the traffic volume is below the 4B threshold D0, D10, and remains so D20, D40, for the period D60, D80, specified by this D100, parameter, the D120, event 4B is SET D160, reported. This UESTATETRA Enumeratio D200, parameter NS(Optional) n Type D240, prevents D320, unnecessary D640, traffic volume D1280, events that are D2560, caused by traffic D5000 volume instability from being triggered. ADD Uniquely CTCH(Mandato identifying a ry) FACH in a cell. Interval Type 1~32
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
FachId
FACH ID
1~32
1~32
1~32
This parameter specifies the Interval maximum power Type of the FACH.
-350~150
8/7/2013
3133267
162734118.xls.ms_office1
Indicating whether the FACH measurement occasion period length coefficient should be delivered through the system information. If the inter-freq or interRAT measurement control information is ADD REQUIRE, broadcast through REQUIRE, CELLMEAS(O Enumeratio NOT_REQ the system NOT_REQ ptional) n Type UIRE information, some UIRE UEs in CELL_FACH state need the FACH measurement occasion period length coefficient for measurement. When [Interfreq/Inter-RAT Meas Ctrl Info Ind] is set to NOT_REQUIRE, this parameter is
This parameter ADD defines the reduce FACH power Interval FACHPwrRe CELLOLC(Opti value in reducing reduce value Type duceValue onal) FACH power Action. This parameter specifies the factor associated with the SET Interval scheduling SPIFACTOR(M priority indicator. Type andatory) This factor is used to calculate the step of rate upsizing.
0~30
0~3,step:0.1
FACTOR
SPI Factor
0~100
0~100
8/7/2013
3143267
162734118.xls.ms_office1
This parameter specifies the activity factor. The configured bandwidth of the SET CCP, NCP, CTRLFACTOR ALCAP, or OM (Mandatory) link IPoA PVC multiplied by the activity factor is the bandwidth of the link. This parameter specifies the threshold of allowed times of rate increase consecutive failure within a certain monitoring period. Increase of the BE service rate is triggered SET by the report on DCCC(Optional 4A measurement ) that is performed in the UL and the DL separately. If the times of failure is beyond this threshold, subsequent rate increase is not allowed even if the 4A measurement report is received.
FACTOR
Factor
Interval Type
0~100
0%~100%
FailTimeTh
Interval Type
1~255
1~255
8/7/2013
3153267
162734118.xls.ms_office1
FC
Flow Control
This parameter specifies whether to send and SET receive flow ENABLE, ENABLE, ETHPORT(Opti control frame in Enumeratio DISABLE DISABLE onal) the Ethernet. It n Type indicates whether to enable the flow control.
FCINDEX
ADD FRALNK(Optio nal) ADD IMAGRP(Optio nal) SET OPT(Mandatory ) SET ETHPORT(Ma ndatory) ADD MPGRP(Option al) ADD PPPLNK(Optio nal) ADD UNILNK(Optio nal) ADD ATMLOGICPO RT(Optional) ADD PORTFLOWC TRLPARA(Ma ndatory) ADD IPLOGICPORT (Optional)
This parameter specifies the flow Interval control parameter Type index.
0~1999
0 to 1999
8/7/2013
3163267
162734118.xls.ms_office1
None(No CRC check), 16bit(16bit CRC check), 32bit(32bit
FCSTYPE
ADD PPPLNK(Optio This parameter nal) None, specifies the CRC Enumeratio ADD 16bit, 32bit check mode. n Type MPLNK(Option al)
This parameter specifies the step size of the closedSTEPSIZE_ loop power 0.5DB, control performed STEPSIZE_ on DL DPCH in SET 0.5, 1, 1.5, Enumeratio 1DB, Frequency FRC(Optional) 2 STEPSIZE_ Division Duplex n Type 1.5DB, (FDD) mode. For STEPSIZE_ details of this 2DB parameter, refer to the 3GPP TS 25.214.
ADD CELLSETUP(O F-DPCH ptional) FdpchDivMo diversity mode ADD dforMIMO for MIMO user NRNCCELL(O ptional)
This parameter indicates FDPCH None, Enumeratio diversity mode for STTD n Type MIMO user.
None, STTD
This parameter indicates FDPCH None, Enumeratio diversity mode for STTD n Type non MIMO user.
None, STTD
This parameter specifies the maximum reference power for the F-DPCH. This parameter indicates the SET maximum value Interval FDPCHRLPW of reference FType R(Optional) DPCH TX power, that is, the value of the Maximum DL Power IE. For details of this parameter, refer to the 3GPP TS 25.433.
-350~150
-35~15, step:0.1
8/7/2013
3173267
162734118.xls.ms_office1
This parameter specifies the minimum reference power for the F-DPCH. This parameter indicates the SET minimum value of FDPCHRLPW reference FR(Optional) DPCH TX power, that is, the value of the Minimum DL Power IE. For details of this parameter, refer to the 3GPP TS 25.433. This parameter specifies the power offset of TPC command in SET F-DPCH channel FDPCHPARA( to reference FOptional) DPCH TX power (expressed by the Initial DL Transmission Power IE).
Interval Type
-350~150
-35~15, step:0.1
FdpchPO2
Interval Type
0~24
This parameter ADD specifies the FE IP Address NODEBESN(M IP address for the Type andatory) DHCP server.
0.0.0.0~255 .255.255.25 5
8/7/2013
3183267
162734118.xls.ms_office1
FILENAME
This parameter specifies the name used to save the exported file. String Type This name should not contain the directory.
0 to 128 characters
FILEPATH
This parameter EXP specifies the path CFGMML(Opti String Type for saving the onal) exported file.
0 to 128 characters
FilterCoef
According to the 3GPP TS 25.331, the filtering of the measurement value is calculated using the following formula, where k represents this parameter: Fn = (1 - a) * Fn 1 + a * Mn Here, D0, D1, Fn: the updated D2, D3, D4, filtered Intra-freq SET D5, D6, D7, measurement 0,1,2,3,4,5,6 meas L3 filter INTRAFREQH Enumeratio D8, D9, result ,7,8,9,11,13, coeff O(Optional) n Type D11, D13, Fn - 1: the old 15,17,19 D15, D17, filtered D19 measurement result Mn: the latest received measurement result from physical layer measurements a = (1/2)(k/2). When a is set to 1, this means L3 filtering will not be applied.
8/7/2013
3193267
162734118.xls.ms_office1
L3 filtering coefficient for event 2D or event 2F measurement. The larger the value of this parameter, the stronger the smoothing effect and the higher the anti-fast-fading capability, but the lower the signal change tracing capability. If the value of this Enumeratio parameter is set n Type too small, unnecessary intersystem handovers may occur. The parameter has the same physical meaning and measurement model as the interfrequency measurement L3 filter coefficient. The report period is 480 ms. For specific analysis,
D0, D1, D2, D3, D4, D5, D6, D7, 0,1,2,3,4,5,6 D8, D9, ,7,8,9,11,13, D11, D13, 15,17,19 D15, D17, D19
FixedMachs WinSize
This parameter specifies the fixed MAC-hs window D4, D6, ADD size. It is valid Fixed MACD8, D12, NODEBLMTP when the [Is Enumeratio hs window size D16, D24, ARA(Optional) MAC-hs window n Type D32 size fixed or not] parameter is set to TRUE.
8/7/2013
3203267
162734118.xls.ms_office1
Switch of the FLC algorithm. The FLC is a mandatory algorithm used in the multifrequency network to ADD OFF(OFF), guarantee that CELLMCCH(O Enumeratio OFF, ON ON(ON) UEs camping on ptional) n Type other frequencies can reselect the current frequency to receive the MBMS service. Therefore, the switch is on by default.
ADD FRALNK(Optio nal) SET OPT(Optional) ADD PPPLNK(Optio nal) ADD IMAGRP(Optio nal) ADD IPLOGICPORT (Optional) ADD MPGRP(Option al) ADD UNILNK(Optio nal) ADD ATMLOGICPO RT(Optional) SET ETHPORT(Opti onal)
This parameter specifies whether the switch of flow Enumeratio OFF, ON control on the link n Type is turned on.
OFF, ON
FLOWID
Flow ID
ADD This parameter Interval FLOW(Mandat specifies the flow Type ory) ID.
0~299
0~299
8/7/2013
3213267
162734118.xls.ms_office1
This parameter specifies the file name. The license file must be saved ACT in \FTP\License. LICENSE(Opti If the file name is String Type onal) not specified, the latest license file in \FTP\License is activated through this command.
FN
File Name
0 to 100 characters
FN
File Name
String Type -
1~128 characters
When the CELLID+RTT method is selected, this parameter specifies whether forced soft handover is performed if the ForcedSho SET number of RTT Switch In ForcedSHOS SMLC(Optional measured result is Enumeratio OFF, ON CELLID+RTT witch ) n Type smaller than 3. Method After soft handover is complete, accuracy of the CELLID+RTT method is enhanced when the RNC obtains more radio links.
OFF, ON
8/7/2013
3223267
162734118.xls.ms_office1
FPMUXSWI TCH
FPMUX flag
Indicating whether to check the link of the IP ADD path with IPPATH(Option Enumeratio NO, YES FPMUX. Only al) n Type FG2a and GOUa board support FPMUX.
NO, YES
FPTIMER
FPTIMER
Interval Type
1~10
1~10
FRAGSIZE
ADD This parameter Interval MP flake size MPGRP(Option specifies the MP Type al) flake size.
128~1024
128 to 1024
FRALNKN
This parameter ADD specifies the Fractional link FRALNK(Mand number of a No. atory) fractional ATM/IMA link.
Interval Type
0~31
0 to 31
8/7/2013
3233267
162734118.xls.ms_office1
FRALNKT
This parameter ADD Fractional link specifies the type FRAATM, FRAATM, FRALNK(Mand Enumeratio type of a fractional FRAIMA FRAIMA atory) n Type link.
FRMLEN
TX frame length
The longer a TX frame is, the higher the ADD D32, D64, transmission IMAGRP(Optio Enumeratio D32,D64,D D128, D256 efficiency is but nal) n Type 128,D256 the less the sensitivity against error is.
FTI
Index of the ADD factor table used ADJMAP(Man by the current datory) adjacent node.
Interval Type
0~33
0~33
8/7/2013
3243267
162734118.xls.ms_office1
FTI
Interval Type
1~33
1~33
PDCP(PDC P header compress), AMRC(AM R voice coding rate control), TFOTRFO( TFO/TrFO), INDIRECR ETRY(Intra system direct retry), INTERRAT DIRECRET RY(Inter system direct retry), INTERRAT REDIRECT (Inter system redirect), CBS(Cell broadcast service), CELLID(C ELL ID LCS), OTDOA(O TDOA
PDCP,AM RC,TFOTR FO,INDIRE CRETRY,I NTERRAT DIRECRET RY,INTER RATREDIR ECT,CBS,C ELLID,OT DOA,AGPS ,PUC,INTR ACELLLD B,INTERC ELLLDB,M ULTIRAB, HCS,RABD OWNSIZIN G,QCPE,IN TERSERVI CEHO,INT ERLOADH O,IUQOSR ENEG,LCS CZ,HSDPA ,IUFLEX,I UBSC,IUBI P,MBMS
8/7/2013
3253267
162734118.xls.ms_office1
WBAMR( Wide band AMR), HSUPA(HS UPA), RANSHAR E(RAN sharing), HSDPA3.6 M(HSDP3. 6M), HSDPA7.2 M(HSDPA7 .2M), ROHC(PD CP ROHC Function), IURLC(LC S over Iur), NACC(Net work Assisted Cell Change), PSHBUG(P S Handover Between UMTS and GPRS), IMSIBH(I MSI Based
WBAMR,H SUPA,RAN SHARE,HS DPA3.6M, HSDPA7.2 M,ROHC,I URLC,NA CC,PSHBU G,IMSIBH, 32HSDPAU PERCELL, 64HSDPAU PERCELL, STMTRAO NHSDPA,H SDPASTA TETRAN,H SDPADRD, ENHANCE DIUFLEX, STMTRAO NHSUPA,A TMIPDUA LSTACK,IP TRANINIU R,IPTRANI NIU,FRAC TIONALIP, IPIUBOVE RBOOKIN G,FRACTI
8/7/2013
3263267
162734118.xls.ms_office1
SRNSRWC UPDATE(S RNS Relocation with Cell/URA Update), LOSSLESS SRNSREL CT(Lossless SRNS Relocation), INTERFRE QHARDHN DV(Inter frequency hard handover), IMPRVED WNLNKC VRGE(Impr oved Downlink Coverage), ACRWHE NSPUOVE R(Access Class Restriction when SPU overload),
SRNSRWC UPDATE,L OSSLESSS RNSRELC T,INTERF REQHARD HNDV,IMP RVEDWNL NKCVRGE ,ACRWHE NSPUOVE R,CBWHE NIUIFAUL T,3G2GCO MMON_L OAD,FP_M UX,HSDPA _OVER_IU R,HS_DPC CH_PREA MBLE_SU PPORT,HS UPA_5_74 MBPS,HSU PA_OVER_ IUR,HUB_I UB_OVER BOOKING, IMS_SIGN ALING_O VER_HSP
8/7/2013
3273267
162734118.xls.ms_office1
DYNAMIC _POWER_ ESTIMATI ON_FOR_ MTCH(Dyn amic Power Estimation for MTCH), ONE_TUN NEL(One Tunnel), MULCAR_ SWOFF_B ASEDON_ TRALOAD (Multicarrier switch off based on traffic load), CS_OVER_ HSPA(CS voice over HSPA), VOIP_OVE R_HSPA(V oIP over HSPA Introduction Pakage), 96_HSDPA
DYNAMIC _POWER_ ESTIMATI ON_FOR_ MTCH,ON E_TUNNE L,MULCA R_SWOFF_ BASEDON _TRALOA D,CS_OVE R_HSPA,V OIP_OVER _HSPA,96_ HSDPA_U SERS_PER _CELL,HS PA_DOWN 28_PER_U SER,HSPA _DOWN21 _PER_USE R,96_HSUP A_USERS_ PER_CELL ,MSCH_SC HEDULIN G,MBMS_ CHANNEL, ENHANCE D_CELL_F
8/7/2013
3283267
162734118.xls.ms_office1
ADD PPPLNK(Optio nal) ADD MPGRP(Option al) ADD FRALNK(Optio nal) ADD IMAGRP(Optio nal) ADD UNILNK(Optio nal) ADD IPLOGICPORT (Optional)
When the remaining transmit bandwidth is smaller than or Interval equal to this Type parameter value, the forward congestion alarm is triggered.
0~1000000
0 to 1000000
This parameter specifies the remaining ADD bandwidth Interval ATMLOGICPO threshold for Type RT(Optional) generating the forward congestion alarm.
0~149000
AOUa/AEU a: 0~64000; UOIa (directly carried on the leaf ATM Logical Port of the optical port): 0~149000; other boards: 0~64000
8/7/2013
3293267
162734118.xls.ms_office1
If the available forward bandwidth is less ADD than or equal to Interval AAL2PATH(O this value, the Type ptional) forward congestion alarm is emitted.
0~320000
0~320000
8/7/2013
3303267
162734118.xls.ms_office1
If the available forward bandwidth is less ADD than or equal to Interval IPPATH(Option this value, the Type al) forward congestion alarm is emitted.
0~3000000 0~3000000
8/7/2013
3313267
162734118.xls.ms_office1
If the available forward bandwidth is less ADD than or equal to Interval RSCGRP(Optio this value, the Type nal) forward congestion alarm is emitted.
0~4000000 0~4000000
8/7/2013
3323267
162734118.xls.ms_office1
ADD PPPLNK(Optio nal) ADD MPGRP(Option al) Forward ADD FWDCONGC congestion FRALNK(Optio LRBW clear threshold nal) ADD IMAGRP(Optio nal) ADD UNILNK(Optio nal)
When the remaining transmit bandwidth is Interval greater than this Type parameter value, the forward congestion alarm is cleared.
0~1000000
0 to 1000000
8/7/2013
3333267
162734118.xls.ms_office1
This parameter specifies the forward congestion clear threshold. When Forward ADD the remaining Interval FWDCONGC congestion IPLOGICPORT bandwidth Type LRBW clear threshold (Optional) reaches this parameter value, the forward congestion alarm is cleared.
0~200000
0~200000
This parameter specifies the remaining Forward ADD bandwidth FWDCONGC congestion ATMLOGICPO threshold for LRBW clear threshold RT(Optional) clearing the forward congestion.
Interval Type
0~149000
AOUa/AEU a: 0~64000; UOIa (directly carried on the leaf ATM Logical Port of the optical port): 0~149000; other boards: 0~64000
8/7/2013
3343267
162734118.xls.ms_office1
If the available forward Forward ADD bandwidth is Interval FWDCONGC congestion AAL2PATH(O greater than this Type LRBW clear threshold ptional) value, the forward congestion alarm is cleared.
0~320000
0~320000
8/7/2013
3353267
162734118.xls.ms_office1
If the available forward Forward ADD bandwidth is Interval FWDCONGC congestion IPPATH(Option greater than this Type LRBW clear threshold al) value, the forward congestion alarm is cleared.
0~3000000 0~3000000
8/7/2013
3363267
162734118.xls.ms_office1
If the available forward Forward ADD bandwidth is Interval FWDCONGC congestion RSCGRP(Optio greater than this Type LRBW clear threshold nal) value, the forward congestion alarm is cleared.
0~4000000 0~4000000
8/7/2013
3373267
162734118.xls.ms_office1
ADD PPPLNK(Optio nal) ADD MPGRP(Option al) ADD FRALNK(Optio nal) ADD IMAGRP(Optio nal) ADD UNILNK(Optio nal) ADD IPLOGICPORT (Optional)
This parameter specifies the transmit Interval bandwidth Type reserved for the user in handover.
0~1000000
0 to 1000000
This parameter ADD specifies the Interval ATMLOGICPO bandwidth Type RT(Optional) reserved for the forward handover.
0~149000
AOUa/AEU a: 0~64000; UOIa (directly carried on the leaf ATM Logical Port of the optical port): 0~149000; other boards: 0~64000
8/7/2013
3383267
162734118.xls.ms_office1
Interval Type
0~320000
0~320000
8/7/2013
3393267
162734118.xls.ms_office1
Interval Type
0~3000000 0~3000000
8/7/2013
3403267
162734118.xls.ms_office1
Interval Type
0~4000000 0~4000000
The power occupancy factor of the control ADD part. For detailed Interval PRACHTFC(M information of Type andatory) this parameter, refer to 3GPP TS 25.214.
1~15
1~15
The power occupancy factor of the data part. ADD For detailed Interval PRACHTFC(O information of Type ptional) this parameter, refer to 3GPP TS 25.214.
0~15
0~15
8/7/2013
3413267
162734118.xls.ms_office1
This parameter STR specifies the IP IPCHK(Mandat address for the ory) check.
IP Address Type
0.0.0.0~255 .255.255.25 5
GCDF
DEG(Degre GeoADD Geo-coordinate e), coordinate data SMLCCELL(O data format, DEG Enumeratio 0~1 SEC(Degre format ptional) or SEC. n Type e Minute and Second)
GCDF
GCDF
ADD GPS(Optional)
This parameter specifies the geographical coordinate data format (GCDF), Enumeratio DEG(DEG), DEG, SEC either in degrees n Type SEC(SEC) or in the form of degree:minute:sec ond.
8/7/2013
3423267
162734118.xls.ms_office1
General common ADD General common Interval GENCCHDL channel service TRMFACTOR( channel service Type downlink Optional) downlink factor. factor
0~100
0~100
General ADD General common common Interval GENCCHUL TRMFACTOR( channel service channel service Type Optional) uplink factor. uplink factor
0~100
0~100
8/7/2013
3433267
162734118.xls.ms_office1
WBAMR_ BITRATE_ 6.60K, WBAMR_ BITRATE_ 8.85K, WBAMR_ BITRATE_ 12.65K, WBAMR_ ADD BITRATE_ Maximum rate of Max Mode Of CELLAMRCW 14.25K, the wideband Wideband B(Optional) WBAMR_ GoldMaxMod AMR speech Enumeratio AMRC For SET BITRATE_ e service for gold n Type Golden Users AMRCWB(Opt 15.85K, users. ional) WBAMR_ BITRATE_ 18.25K, WBAMR_ BITRATE_ 19.85K, WBAMR_ BITRATE_ 23.05K, WBAMR_ BITRATE_ 23.85K
8/7/2013
3443267
162734118.xls.ms_office1
NBAMR_B ITRATE_4. 75K, NBAMR_B ITRATE_5. 15K, NBAMR_B ITRATE_5. 90K, ADD Maximum rate of NBAMR_B Max Mode Of CELLAMRC(O the narrowband ITRATE_6. Narrowband ptional) GoldMaxMod AMR speech Enumeratio 70K, AMRC For SET e service for gold n Type NBAMR_B Golden Users AMRC(Optiona users. ITRATE_7. l) 40K, NBAMR_B ITRATE_7. 95K, NBAMR_B ITRATE_1 0.20K, NBAMR_B ITRATE_1 2.20K
8/7/2013
3453267
162734118.xls.ms_office1
Indicates whether gold users involve in the switch of congestion control. According to the policy set for gold users by operators, if service quality of gold users should be guaranteed even in resource congestion, the ADD switch should be GoldUserLoa Gold user load OFF(OFF), CELLLDR(Opti disabled. If the Enumeratio OFF, ON dControlSwit control switch ON(ON) onal) switch is enabled, n Type ch LDR such as rate reduction and handover also occurs on gold users even in cell resource congestion, which impacts user service quality. If the switch is disabled, no action is performed on gold users. This parameter specifies the Interval period of Type reporting the GPS data.
GPSPERIOD
ADD GPS(Optional)
1~60
1 to 60
GRPID
ADD Number of the Interval RSCGRP(Mand transport resource Type atory) group.
0~119
0~119
GRPT
Type of the ADD transport resource RSCGRP(Mand group. Type of Enumeratio ATM, IP atory) the transport n Type resource group.
ATM, IP
8/7/2013
3463267
162734118.xls.ms_office1
ADD GSMCELL(Ma ndatory) Uniquely HO identifying a CELL(Optional) GSM cell. ADD GSMNCELL(M andatory)
Interval Type
0~65535
0~65535
GSMCellNa me
String Type -
1~31 characters
When event 5A is triggered, a pending timer is started, during which event 5A will not be ADD reported before Interval Block TYPRABQUA HangBlockN the specified Number LITYMEAS(M um5A number is andatory) reached. This parameter can control the frequency for reporting event 5A.
Interval Type
1~512
1~512
8/7/2013
3473267
162734118.xls.ms_office1
HappyBR
This parameter specifies the Happy bit rate of the best-effort (BE) service with different user priorities. The Happy bit rate is the private information element on the Iub interface and SET it is used for the Interval Happy bit rate USERHAPPYB flow control by Type R(Optional) the NodeB. When resource is limited,the user rate reach the Happy bit rate,the user's scheduling priority will be reduced.When Happy bit rate is set to 0,the Happy bit rate function is closed.
0~5000
0~5000
This parameter indicates whether the cell of the neighboring RNC supports the HARQ Preamble ADD Mode0, capability. Mode1 NRNCCELL(O Enumeratio Mode1 means the cell ptional) n Type supports the HARQ Preamble capability, whereas Mode0 means not supporting it.
Mode0,Mod e1
8/7/2013
3483267
162734118.xls.ms_office1
This parameter specifies the time used for decision of HSUPA happy D2, D10, bit. The decision D20, D50, ADD is based on D100, TYPRABHSPA whether all the Enumeratio D200, (Optional) buffered user data n Type D500, can be transmitted D1000 at the current rate during the time specified by this parameter.
HBINTER
Heartbeat interval
It can be used to ADD calculate the Interval SCTPLNK(Opti heartbeat interval Type onal) of the idle SCTP server.
1000~6000 1000~6000 00 00
HCARRYT
This parameter specifies the type of link that carries the high-end ADD UNI, IMA, UNI, IMA, VPL/VCL cross VPCLCX(Mand Enumeratio FRAATM, FRAATM, connection. atory) n Type NCOPT NCOPT GUI value range: UNI, IMA, FRAATM, NCOPT.
This parameter is Punish Timer used for setting ADD HCodeAdjPu Length for the punish timer Interval CELLHSDPA( nshTimerLen Code Adjust length for Type Optional) gth for HSDPA adjusting hsdpa code again.
0~300
0~300
8/7/2013
3493267
162734118.xls.ms_office1
HCSPrio
HCS priority of the cell belongs to. The parameter Interval depends on HCS Type rules. For details, refer to 3GPP TS 25.304.
0~7
0~7
HSDPA ADD background Interval TRMFACTOR( service downlink Type Optional) factor.
0~100
0~100
8/7/2013
3503267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
HSDPA HSDPA ADD background background pri HDBKGPRIT LOADEQ(Opti bearing primary path load H onal) path load threshold threshold.
Interval Type
0~100
0~100
8/7/2013
3513267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSDPA ADD HSDPA HDBKGSEC background TRMMAP(Opti background PATH secondary path onal) secondary path.
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
HSDPA ADD background pri HDBKGSEC LOADEQ(Opti sec path load WHT onal) ratio threshold
Interval Type
0~100
0~100
8/7/2013
3523267
162734118.xls.ms_office1
HSDPA HSDPA conversational ADD conversational Interval service TRMFACTOR( HDCONVDL service downlink Type downlink Optional) factor. factor
0~100
0~100
8/7/2013
3533267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSDPA ADD HSDPA HDCONVPR conversational TRMMAP(Opti conversational IPATH primary path onal) primary path.
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
HSDPA HSDPA ADD conversational conversational HDCONVPR LOADEQ(Opti bearing primary pri path load ITH onal) path load threshold threshold.
Interval Type
0~100
0~100
8/7/2013
3543267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSDPA ADD HSDPA HDCONVSE conversational TRMMAP(Opti conversational CPATH secondary path onal) secondary path.
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
HSDPA HSDPA conversational conversational ADD primary HDCONVSE pri sec path LOADEQ(Opti secondary path CWHT load ratio onal) load ratio threshold threshold.
Interval Type
0~100
0~100
HSDPA high priority ADD interactive LOADEQ(Opti bearing primary onal) path load threshold.
Interval Type
0~100
0~100
8/7/2013
3553267
162734118.xls.ms_office1
HSDPA high HDHIGHINT pri sec path ERACTSEC load ratio WHT threshold
HSDPA high priority ADD interactive LOADEQ(Opti primary onal) secondary path load ratio threshold.
Interval Type
0~100
0~100
ADD HSDPA Interval TRMFACTOR( interactive service Type Optional) downlink factor.
0~100
0~100
8/7/2013
3563267
162734118.xls.ms_office1
HSDPA high ADD HSDPA high HDINTHGH PRI interactive TRMMAP(Opti PRI interactive PRIPATH primary path onal) primary path.
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
8/7/2013
3573267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSDPA high ADD HSDPA high HDINTHGH PRI interactive TRMMAP(Opti PRI interactive SECPATH secondary path onal) secondary path.
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
8/7/2013
3583267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, HSDPA low ADD HSDPA low PRI AF42, HDINTLOW PRI interactive TRMMAP(Opti interactive Enumeratio AF43, EF, PRIPATH primary path onal) primary path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
8/7/2013
3593267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, HSDPA low ADD HSDPA low PRI AF42, HDINTLOW PRI interactive TRMMAP(Opti interactive Enumeratio AF43, EF, SECPATH secondary path onal) secondary path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
8/7/2013
3603267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
8/7/2013
3613267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSDPA ADD HSDPA middle middle PRI HDINTMIDS TRMMAP(Opti PRI interactive interactive ECPATH onal) secondary path. secondary path
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
HSDPA low priority ADD interactive LOADEQ(Opti bearing primary onal) path load threshold.
Interval Type
0~100
0~100
HSDPA low priority HSDPA low ADD interactive HDLOWINT interactive pri LOADEQ(Opti primary ERACTSEC sec path load onal) secondary path WHT ratio threshold load ratio threshold.
Interval Type
0~100
0~100
8/7/2013
3623267
162734118.xls.ms_office1
HSDPA middle priority ADD interactive LOADEQ(Opti bearing primary onal) path load threshold.
Interval Type
0~100
0~100
HSDPA middle priority HSDPA mid ADD interactive HDMIDINTE interactive pri LOADEQ(Opti primary RACTSECW sec path load onal) secondary path HT ratio threshold load ratio threshold.
Interval Type
0~100
0~100
HDSIPDL
HSDPA IMS ADD signal HSDPA IMS TRMFACTOR( downlink downlink factor. Optional) factor
Interval Type
0~100
0~100
8/7/2013
3633267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSDPA IMS ADD HSDPA Signal HDSIPPRIPA Signal primary TRMMAP(Opti primary path. TH path onal)
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
HDSIPPRIT H
HSDPA IMS HSDPA IMS ADD Signal bearing Interval Signal pri path LOADEQ(Opti primary path load Type load threshold onal) threshold.
0~100
0~100
8/7/2013
3643267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSDPA IMS ADD HSDPA Signal HDSIPSECP Signal TRMMAP(Opti secondary path. ATH secondary path onal)
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
HSDPA IMS HSDPA IMS ADD Signal primary Signal pri sec HDSIPSECW LOADEQ(Opti secondary path path load ratio HT onal) load ratio threshold threshold.
Interval Type
0~100
0~100
8/7/2013
3653267
162734118.xls.ms_office1
HDSRBDL
HSDPA signal ADD HSDPA SRB downlink TRMFACTOR( downlink factor. factor Optional)
Interval Type
0~100
0~100
8/7/2013
3663267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSDPA ADD HSDPA Signal HDSRBPRIP Signal primary TRMMAP(Opti primary path. ATH path onal)
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
HSDPA Signal HSDPA ADD bearing primary HDSRBPRIT Signal pri path LOADEQ(Opti path load H load threshold onal) threshold.
Interval Type
0~100
0~100
8/7/2013
3673267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSDPA ADD HSDPA Signal HDSRBSECP Signal TRMMAP(Opti secondary path. ATH secondary path onal)
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
HSDPA Signal HSDPA ADD primary Signal pri sec HDSRBSEC LOADEQ(Opti secondary path path load ratio WHT onal) load ratio threshold threshold.
Interval Type
0~100
0~100
8/7/2013
3683267
162734118.xls.ms_office1
ADD HSDPA Interval TRMFACTOR( streaming service Type Optional) downlink factor.
0~100
0~100
8/7/2013
3693267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, ADD HSDPA AF42, TRMMAP(Opti streaming primary Enumeratio AF43, EF, onal) path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
HSDPA ADD streaming bearing Interval LOADEQ(Opti primary path load Type onal) threshold.
0~100
0~100
8/7/2013
3703267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSDPA ADD HSDPA HDSTRMSE streaming TRMMAP(Opti streaming CPATH secondary path onal) secondary path.
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
HSDPA HSDPA ADD streaming primary streaming pri Interval HDSTRMSE LOADEQ(Opti secondary path sec path load Type CWHT onal) load ratio ratio threshold threshold.
0~100
0~100
8/7/2013
3713267
162734118.xls.ms_office1
HSDPA voice ADD HSDPA voice service Interval HDVOICED TRMFACTOR( service downlink downlink Type L Optional) factor. factor
0~100
0~100
8/7/2013
3723267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
ADD HSDPA Voice HSDPA Voice HDVOICEPR TRMMAP(Opti primary path primary path. IPATH onal)
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
8/7/2013
3733267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
ADD HSDPA Voice HSDPA Voice HDVOICESE TRMMAP(Opti secondary path secondary path. CPATH onal)
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
This parameter specifies the number of the Fractional link corresponding to the high-end port. For the AEUa, the number ranges from 0 to 31. For High ADD the AOUa in E1 Interval HFRAATML FRAATM link VPCLCX(Optio transmission Type NKN No. nal) mode, the number ranges from 0 to 125. For the AOUa in T1 transmission mode, the number ranges from 0 to 167. The bearing Fractional link is configured.
0~31
0 to 31
8/7/2013
3743267
162734118.xls.ms_office1
32-bit unsigned integer. 1) DL_DCCH_SWI TCH. When it is checked, SRNC will include the IE "RB Id for handover message" in the IE "SRNS Relocation Info", the target RNC should choose the IE "DL DCCH Relocation ADD message" and HhoRelocPro with HHO NRNC(Optional include the DL cSwitch process switch ) DCCH message that should be transmitted transparently to the UE by the source RNC. In that case, the target RNC is integrity protecting the message if applicable. 2) IUR_TRG_SWIT CH. When it is Indicating whether to trigger ADD hard handover HHO cross HHOTRIG NRNC(Mandat cross the Iur IUR trigger ory) interface between the RNC and the neighboring This parameter specifies the number of the IMA group corresponding to the high-end port. ADD For the AEUa, the High IMA HIMAGRPN VPCLCX(Optio number ranges group No. nal) from 0 to 31. For the AOUa, the number ranges from 0 to 83. The bearing IMA group is configured.
OFF,ON
Interval Type
0~83
0 to 83
8/7/2013
3753267
162734118.xls.ms_office1
HoAsuTmr
A timer to RNC wait for the HO active set SET response to active Interval update STATETIMER( set update in soft Type response timer Optional) handover procedure.
1~10000
1~10000
A timer to RNC wait for the response to the HO cell SET Interval cell update HoCellUpdat update STATETIMER( confirm from UE Type eRspTmr response timer Optional) in forward handover procedure. Priority of coverage-based inter-frequency handover. "0" means that the The priority of ADD coverage-based coverage based Interval INTERFREQN inter-frequency inter-frequency Type CELL(Optional) handover is not handover supported. "1" means the highest priority. "3" means the lowest priority.
1~10000
1~10000
HOCovPrio
0~3
0~3
A timer to RNC SET wait for paging HO paging Interval HoPagingRsp STATETIMER( response in response timer Type Tmr Optional) forward handover procedure. A timer to RNC wait for the HO PhyCh SET response to Interval HoPhychRecf reconfiguration STATETIMER( physical channel Type gTmr timer Optional) reconfiguration in hard handover procedure. A timer to RNC SET wait for relocation HO relocation Interval HoRelocReq STATETIMER( request in forward request timer Type Tmr Optional) handover procedure.
1~10000
1~10000
1~10000
1~10000
1~10000
1~10000
8/7/2013
3763267
162734118.xls.ms_office1
This parameter specifies the NodeB host type in RNC Node Redundancy function. If the parameter value is SINGLEHOST, the physical NodeB is managed only by SINGLEHO one RNC. If the ST(SingleH ADD parameter value is ost), SingleHost, NODEB(Option PRIMHOST or Enumeratio PRIMHOS PrimHost, al) SECHOST, the n Type T(PrimHost SecHost physical NodeB ), can be managed SECHOST( by two RNCs. SecHost) By default, the NodeB is managed by the host RNC. When the host RNC fails, the physical NodeB is managed by the secondary RNC.
HostType
8/7/2013
3773267
162734118.xls.ms_office1
HandOver switch. 1) HO_ALGO_HCS _SPEED_EST_S WITCH: When the switch is on, the RNC evaluates the UE's moving speed in the HCS and initiates fast intra-layer or slow inter-layer SET handover. CORRMALGO 2) Bit Field SWITCH(Optio HO_ALGO_LDR Type nal) _ALLOW_SHO_ SWITCH: When the switch is on, the LDR interfrequency handover is allowed during soft handover. 3) HO_ALGO_MB MS_FLC_SWIT CH: When the switch is on, the UE requires that the redirection
HoSwitch
HandOver switch
HO_ALGO _HCS_SPE ED_EST_S WITCH, HO_ALGO _LDR_ALL OW_SHO_ SWITCH, HO_ALGO _MBMS_F LC_SWITC H, HO_ALGO _OVERLA Y_SWITC H, HO_INTER _FREQ_HA RD_HO_S WITCH, HO_INTER _FREQ_RP RT_2D2F_ SWITCH, HO_INTER _RAT_CS_ OUT_SWIT CH, HO_INTER _RAT_PS_ 3G2G_CEL
HO_ALGO _HCS_SPE ED_EST_S WITCH, HO_ALGO _LDR_ALL OW_SHO_ SWITCH, HO_ALGO _MBMS_F LC_SWITC H, HO_ALGO _OVERLA Y_SWITC H, HO_INTER _FREQ_HA RD_HO_S WITCH, HO_INTER _FREQ_RP RT_2D2F_ SWITCH, HO_INTER _RAT_CS_ OUT_SWIT CH, HO_INTER _RAT_PS_ 3G2G_CEL
8/7/2013
3783267
162734118.xls.ms_office1
Threshold of signal quality of the target frequency for triggering interfrequency(Ec/No) measurement. If the mode is set to event mode, this parameter is used to set measurement control on the event 2C. If the mode is set to periodical mode, this parameter is used to estimate the periodical reports and only if quality of the target frequency is beyond the threshold, the DRD procedure is triggered. Threshold of signal quality of the target frequency for triggering interfrequency(RSCP) measurement. If the mode is set to event mode, this parameter is used to set measurement control on the event 2C. If the mode is set to periodical mode, this parameter is used to estimate the periodical reports and only if quality of the target frequency is beyond the threshold, the DRD procedure is triggered.
Interval Type
-24~0
-24~0
Interval Type
-115~-25
-115~-25
8/7/2013
3793267
162734118.xls.ms_office1
A timer to RNC wait for the response to the HO wait timer TrCH for TrCH or SET reconfiguration or Interval HoWtTrchRe RB STATETIMER( Type RB cfgRspTmr reconfiguration Optional) reconfiguration response response from UE in hard handover procedure.
1~10000
1~10000
HPN
This parameter specifies the ADD High NCOPT number of the Interval VPCLCX(Optio port No. optical port Type nal) corresponding to the high-end port.
0~3
0 to 3
Interval Type
0~100
8/7/2013
3803267
162734118.xls.ms_office1
Average throughput admission threshold of the HSDPA best effort traffic. If the sum of PBR of all the accessed HSDPA BE users is lower than the average throughput admission threshold of the HSDPA BE ADD service multiplied Interval CELLCAC(Opti by the sum of Type onal) GBR of all the accessed HSDPA BE users, it indicates that the QoS of the accessed users cannot be satisfied and new HSDPA BE services are not allowed. Otherwise, the QoS can be satisfied and new HSDPA BE
0~100
0~1, step:0.01
8/7/2013
3813267
162734118.xls.ms_office1
This parameter determines whether the compressed mode (CM) is permitted for the UE when the HSDPA services exist. If the parameter value is set to TRUE, compressed mode is permitted on HSDPA, and HSDPA services CM SET FALSE(For can be set up HsdpaCMPer permission ind CMCF(Optional Enumeratio bidden), FALSE,TR when the missionInd on HSDPA ) n Type TRUE(Per UE compressed mode mit) is activated. If the parameter value is set to FALSE, channel switch on H2D (from HSDSCH to DCH) should be performed before compressed mode is started, and no HSDPA services should exist when compressed mode is activated.
Interval Type
0~100
Interval Type
0~100
8/7/2013
3823267
162734118.xls.ms_office1
SET LDM(Optional) HSDPA need HsdpaNeedP SET power filter len wrFilterLen SATLDM(Opti onal)
Interval Type
1~32
1~32
Interval Type
1~32
1~32
The minimum number of HSDPA RAB establish request per SPU to report KPI alarm. In a checking period,if the number of Minimum HSDPA RAB Number of SET establish request HsdpaRabEst HSDPA RAB KPIALMTHD( is higher than the AttMinNum Establish Optional) threshold and the Request HSDPA RAB setup successful ratio is lower than this threshold,the KPI alarm of HSDPA RAB setup ratio is reported. Threshold of HSDPA RAB setup successful ratio per SPU to report KPI alarm. In a checking period,if the ratio Threshold of is lower than this HSDPA RAB SET threshold and the HsdpaRabEst Setup KPIALMTHD( number of SuccRatioThd Successful Optional) HSDPA RAB Ratio establish request is higher than the related threshold,the KPI alarm of HSDPA RAB setup ratio is reported.
Interval Type
0~65534
0~65534
Interval Type
0~100
0~100
8/7/2013
3833267
162734118.xls.ms_office1
DL activity SET factor of the Interval ADMCTRL(Op HSUPA Type tional) streaming service.
0~100
Average throughput admission threshold of the HSDPA streaming service. If the sum of PBR of all the accessed streaming users is lower than the average throughput admission threshold of the HSDPA HSDPA ADD streaming service HsdpaStrmPB streaming PBR CELLCAC(Opti multiplied by the RThd threshold onal) sum of GBR of all the accessed streaming users, it indicates that the QoS of the accessed users cannot be satisfied and new HSDPA streaming services are not allowed. Otherwise, the QoS can be satisfied and new The total HSDPA Max ACT throughput of all HSDPAthrou throughput of LICENSE(Opti the operators ghput HSDPA onal) cannot exceed that defined in the license file.
Interval Type
0~100
0~1, step:0.01
Interval Type
0~3910000
0 to 3910000
8/7/2013
3843267
162734118.xls.ms_office1
The cell will shut down Cell Dynamic ADD automatically ShutDown CELLDYNSHU only when the Interval HsdpaUserNu Hsdpa User TDOWN(Optio HSDPA user Type mThd number nal) number is not Threshold greater than the threshold.
0~5
0~5
This parameter specifies the first MAC-d PDU size on the HS-DSCH. For BE services, the size of MACd PDUs is usually HS-DSCH ADD set to a large Interval HsdschMacd MAC-D PDU TYPRABHSPA value. For Type PduSize1 size1 (Optional) streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits.
1~5000
1~5000
8/7/2013
3853267
162734118.xls.ms_office1
This parameter specifies the second MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d HS-DSCH ADD PDUs is usually Interval HsdschMacd MAC-D PDU TYPRABHSPA set to a large Type PduSize2 size2 (Optional) value. For streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits.
1~5000
1~5000
This parameter specifies the third MAC-d PDU size on the HS-DSCH. For BE services, the size of MACd PDUs is usually HS-DSCH ADD set to a large Interval HsdschMacd MAC-D PDU TYPRABHSPA value. For Type PduSize3 size3 (Optional) streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits.
1~5000
1~5000
8/7/2013
3863267
162734118.xls.ms_office1
This parameter specifies the fourth MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d HS-DSCH ADD PDUs is usually Interval HsdschMacd MAC-D PDU TYPRABHSPA set to a large Type PduSize4 size4 (Optional) value. For streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits.
1~5000
1~5000
This parameter specifies the fifth MAC-d PDU size on the HS-DSCH. For BE services, the size of MACd PDUs is usually HS-DSCH ADD set to a large Interval HsdschMacd MAC-D PDU TYPRABHSPA value. For Type PduSize5 size5 (Optional) streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits.
1~5000
1~5000
8/7/2013
3873267
162734118.xls.ms_office1
This parameter specifies the sixth MAC-d PDU size on the HS-DSCH. For BE services, the size of MACd PDUs is usually HS-DSCH ADD set to a large Interval HsdschMacd MAC-D PDU TYPRABHSPA value. For Type PduSize6 size6 (Optional) streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits.
1~5000
1~5000
This parameter specifies the seventh MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d HS-DSCH ADD PDUs is usually Interval HsdschMacd MAC-D PDU TYPRABHSPA set to a large Type PduSize7 size7 (Optional) value. For streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits.
1~5000
1~5000
8/7/2013
3883267
162734118.xls.ms_office1
This parameter specifies the eighth MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d HS-DSCH ADD PDUs is usually Interval HsdschMacd MAC-D PDU TYPRABHSPA set to a large Type PduSize8 size8 (Optional) value. For streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits.
1~5000
1~5000
This parameter specifies the number of sizes of HS-DSCH MAC-d PDUs. The Number ADD Currently, only D1, D2, of HS-DSCH 1, 2, 3, 4, 5, HsdschMacd TYPRABHSPA VoIP services can Enumeratio D3, D4, D5, MAC-D PDU 6, 7, 8 PduSizeNum (Optional) be configured n Type D6, D7, D8 Size with multiple PDU sizes. Other services can have only one PDU size.
HSN
This parameter specifies the ADD number of the slot Interval High slot No. VPCLCX(Mand in which the highType atory) end port carries the VPL/VCL cross connection.
14~27
14 to 27
8/7/2013
3893267
162734118.xls.ms_office1
If the HspaEnhSwitch is enabled, it indicates that the enhanced FDPCH function is ADD supported in the Cell Hspa E_F_DPCH CELLALGOS cell. E_F_DPCH HspaEnhSwit Enhanced Enumeratio _OFF, WITCH(Option Note: The actual _OFF,E_F_ ch function switch n Type E_F_DPCH al) use of this DPCH_ON _ON function is also restricted by the license and the physical capability of the NodeB. According to the relevant protocols, MIMO, 64QAM, and HSSCCH Less Operation cannot be configured concurrently to the same UE. SET This parameter MIMO, Enumeratio FRC(Optional) specifies the 64QAM n Type configuration preference of MIMO, 64QAM, and HS-SCCH Less Operation when both the UE and the cell support these three features.
MIMO,64Q AM
8/7/2013
3903267
162734118.xls.ms_office1
If the corresponding item of this parameter is selected, it indicates that the HspaPlusSwitch is enabled. Otherwise, it indicates that the HspaPlusSwitch is not enabled. Note that the actual use of this ADD function is Cell Hspa Plus CELLALGOS restricted by the Bit Field HspaPlusSwit function switch WITCH(Option license and the Type ch al) physical capability of the NodeB. The EFACH/MIMO switch specifies whether this EFACH/MIMO service is supported in the cell. The setting of the EFACH/MIMO switch does not affect the EFACH in the cell and the
64QAM(Ce ll 64QAM Function Switch), MIMO(Cell MIMO Function Switch), E_FACH(C ell E_FACH Function Switch), DTX_DRX( Cell DTX_DRX Function Switch), HS_SCCH_ LESS_OPE RATION(C ell HS_SCCH LESS OPERATIO N Function Switch), L2ENHAN CED(Cell L2ENHAN CED Function
8/7/2013
3913267
162734118.xls.ms_office1
This parameter specifies the difference between the total HSPA power and the maximum transmission power of a cell. The maximum value of HSPA dynamical power can be adjusted to the total amount The Offset of ADD of HSPA power. Interval HSPA Total CELLHSDPA( If the parameter Type Power Optional) value is set too low, the total HSPA power will be too low, thus impacting the throughput of HSDPA subscribers at the border of a cell. For details about this parameter, refer to 3GPP TS 25.308.
HspaPower
-500~0
-50~0, step:0.1
8/7/2013
3923267
162734118.xls.ms_office1
HSPA serving cell change is usually triggered by event 1D. To avoid frequent serving cell change which may affect the system performance, a protection timer TimerHSPA is needed. This timer shall be started upon SET HSPA handover HOCOMM(Opt completed, i.e. ional) the serving HSDSCH cell changed or the EDCH serving cell changed. And no more 1Dtriggered serving cell change shall be performed until the timer expires. However, this timer shall not restrict HSPA serving cell change to another This parameter specifies whether index 1 of the size of a transport SET block transmitted HSSCCHLESS in HS-SCCH OPPARA(Optio Less Operation nal) mode supports HS-SCCH type 2. For details, refer to the 3GPP TS 25.433 protocol.
Interval Type
0~1024
0~1024
FALSE, TRUE
8/7/2013
3933267
162734118.xls.ms_office1
This parameter specifies whether index 2 of the size of a transport block transmitted in HS-SCCH Less Operation mode supports HS-SCCH type 2. For details, refer to the 3GPP TS 25.433 protocol. This parameter specifies whether index 3 of the size of a transport block transmitted in HS-SCCH Less Operation mode supports HS-SCCH type 2. For details, refer to the 3GPP TS 25.433 protocol. This parameter specifies whether index 4 of the size of a transport block transmitted in HS-SCCH Less Operation mode supports HS-SCCH type 2. For details, refer to the 3GPP TS 25.433 protocol.
FALSE, TRUE
FALSE, TRUE
FALSE, TRUE
8/7/2013
3943267
162734118.xls.ms_office1
The parameter specifies the number of HSDPSCH codes. This parameter is valid only when "Allocate Code Mode" is set to "Manual". If the parameter value is set too low, the HSDPA code resources are restricted and the Code Number ADD HSDPA Interval HsPdschCode for HSCELLHSDPA( performance is Type Num PDSCH Optional) affect. If the parameter value is set too high, the HSDPA code resources are wasted, thus increasing the admission rejection rate of R99 services. For detailed information about this parameter, refer to 3GPP TS 25.308.
1~15
1~15
8/7/2013
3953267
162734118.xls.ms_office1
The parameter determines the maximum number of HS-PDSCH codes (SF=16). This parameter is valid only when "Allocate Code Mode" is set to "Automatic". The number of codes used by the HSPDSCH is dynamically set between "Code Code Max ADD Max Number for Interval HsPdschMax Number for HS- CELLHSDPA( HS-PDSCH" and Type CodeNum PDSCH Optional) "Code Min Number for HSPDSCH", based on whether the code tree is idle or busy. When the code resource used by the nonHSPA services is little, the HSPDSCH uses the rest idle codes as much as possible, and the maximum number of idle
1~15
1~15
8/7/2013
3963267
162734118.xls.ms_office1
The parameter specifies the minimum number of the HSPDSCH codes (SF=16). This parameter is valid only when "Allocate Code Mode" is set to Automatic. The number of codes used by the HSPDSCH is dynamically set Code Min ADD between "Code Interval HsPdschMin Number for HS- CELLHSDPA( Max Number for Type CodeNum PDSCH Optional) HS-PDSCH" and "Code Min Number for HSPDSCH", based on the idle state of the code tree. When the non-H services need more code resources, the nonH service will gradually occupy the codes used by the HS-PDSCH. The number of
1~15
1~15
8/7/2013
3973267
162734118.xls.ms_office1
Measure Power Offset (MPO) Minus3.0D Constant is used B(-3.0dB), to compute Minus2.5D Measure Power B(-2.5dB), Offset, as shown Minus2.0D in Measure Power B(-2.0dB), Offset = Max(-6, Minus1.5D Min(13,CellMaxP B(-1.5dB), ower Minus1.0D PcpichPower B(-1.0dB), Measure Power Minus0.5D OffsetConstant)). B(-0.5dB), If the parameter 0.0DB(0.0d value is B), ADD HS-PDSCH unreasonable, the 0.5DB(0.5d -3~19, HsPdschMPO CELLHSDPA( Enumeratio MPO Constant CQI in some B), step:0.5 ConstEnum Optional) n Type scenarios will 1.0DB(1.0d exceed the range B), of 0 to 30. As a 1.5DB(1.5d result, the NodeB B), MAC-hs cannot 2.0DB(2.0d schedule the B), subscriber in the 2.5DB(2.5d corresponding B), time or cannot 3.0DB(3.0d schedule multiple B), subscribers with 3.5DB(3.5d the difference of B), channel 4.0DB(4.0d conditions. For B), details of the IE 4.5DB(4.5d
ADD CELLSETUP(O Hspdsch HspdschPrioT ptional) priority Tx xDiversityMo ADD diversity mode de NRNCCELL(O ptional)
8/7/2013
3983267
162734118.xls.ms_office1
This parameter specifies the number of the ADD High subrack subrack whose HSRN VPCLCX(Mand No. high-end port atory) carries the VPL/VCL cross connection. This parameter decides the maximum number of subscribers that the NodeB can schedule in a TTI period. In the scenarios like outdoor macro cells with power restricted, it is less likely to schedule multiple subscribers simultaneously, ADD Code Number so two HSHsScchCode CELLHSDPA( for HS-SCCH SCCHs are Num Optional) configured. In the scenarios like indoor pico with code restricted, it is more likely to schedule multiple subscribers simultaneously, so four HSSCCHs are configured. If excessive HSSCCHs are configured, the code resource is This parameter specifies the time interval of HSUPA TTI sending HSUPA 10ms schedule SET Hsupa10msSc scheduling period with FRC(Optional) hPrdForGrant information for grant TTI 10ms when the user has Schedule Grant.
Interval Type
0~5
0 to 5
Interval Type
1~15
1~15
D10, D20, D50, D100, 10, 20, 50, Enumeratio D200, 100, 200, n Type D500, 500, 1000 D1000
8/7/2013
3993267
162734118.xls.ms_office1
This parameter specifies the time interval of sending HSUPA HSUPA TTI scheduling 10ms schedule SET information alone period without FRC(Optional) for TTI 10ms grant when the user has no Schedule Grant and its buffer length is greater than zero. This parameter specifies the time interval of HSUPA TTI sending HSUPA 2ms schedule SET scheduling period with FRC(Optional) information for grant TTI 2ms when the user has Schedule Grant. This parameter specifies the time interval of sending HSUPA HSUPA TTI scheduling 2ms schedule SET information alone period without FRC(Optional) for TTI 2ms when grant the user has no Schedule Grant and its buffer length is greater than zero.
D10, D20, D50, D100, 10, 20, 50, Enumeratio D200, 100, 200, n Type D500, 500, 1000 D1000
Hsupa2msSch PrdForGrant
D2, D10, D20, D50, D100, Enumeratio D200, n Type D500, D1000
D2, D10, D20, D50, D100, Enumeratio D200, n Type D500, D1000
Interval Type
0~100
8/7/2013
4003267
162734118.xls.ms_office1
Threshold for rate decrease of HSUPA BE service soft handover. If the current rate is D8, D16, beyond the D32, D64, threshold, the rate D128, over the EDCH is D144, lowered to the SET D256, threshold before DCCC(Optional Enumeratio D384, the soft handover, ) n Type D608, thus ensuring the D1450, success of the soft D2048, handover of the D2890, HSUPA BE D5760 service. The rate increase of HSUPA in SHO status is not limitted by this parameter.
8, 16, 32, 64, 128, 144, 256, 384, 608, 1450, 2048, 2890, 5760
When the dynamic CE algorithm on NodeB is applied, the CE consumption of HSUPA UE is based on the GBR. When the dynamic CE algorithm on NodeB is not applied, the CE consumption of ADD HSUPA UE is HSUPA NODEBALGO based on the MBR, HsupaCeCons Credit Enumeratio PARA(Optional MBR. If the CE GBR umeSelection Consume Type n Type ) consumption of HSUPA UE is based on the GBR, the CE LDR will not select HSUPA users to do data rate reduction. If the CE consumption of HSUPA UE is based on the MBR,the CE LDR will select HSUPA users to
MBR, GBR
8/7/2013
4013267
162734118.xls.ms_office1
This parameter determines whether the compressed mode (CM) is permitted for the UE when HSUPA services exist. If the parameter value is set to Permit, compressed mode is permitted on HSUPA, and For each HSUPA services Limited, switch of can be set up Permit, CM SET this when the BasedOnUE HsupaCMPer permission ind CMCF(Optional Enumeratio parameter, compressed mode Cap(Based missionInd on HSUPA ) n Type the value activated. If the On UE can be ON, parameter value is Capability) OFF. set to Limited, channel switch on E2D (from EDCH to DCH) should be performed before the compressed mode is started and no HSUPA services should exist when the compressed mode is activated. If the
Interval Type
0~100
8/7/2013
4023267
162734118.xls.ms_office1
Strategy of the UE for rate adjustment over the EDCH. RATE_UP_AND _DOWN_ON_E DCH indicates RATE_UP_ that the rate over AND_DO the EDCH can be SET WN_ON_E raised or lowered. DCCC(Optional Enumeratio DCH, RATE_UP_ONL ) n Type RATE_UP_ Y_ON_EDCH ONLY_ON indicates that the _EDCH rate over the EDCH can only be raised, which means that the UE can switch to the FACH state at any rate.
Threshold of all the HSUPA user PBR whose schedule priority is the same as that of users to be admitted. If this value is too high, the possibility of rejecting HSUPA schedule services Equal priority ADD increases, which HsupaEqualP Interval HSUPA user CELLCAC(Opti impacts access riorityUserPB Type PBR threshold onal) success rate. If RThd the value is too low, too many HSUPA schedule users may be admitted, which impacts the admitted users and results in overload and system congestion.
0~100
0~1, step:0.01
8/7/2013
4033267
162734118.xls.ms_office1
Threshold of all the HSUPA user PBR whose schedule priority is higher than that of users to be admitted. If this value is too high, the possibility of rejecting HSUPA schedule services increases, which High priority ADD HsupaHighPri impacts access Interval HSUPA user CELLCAC(Opti orityUserPBR success rate. If Type PBR threshold onal) Thd the value is too low, too many HSUPA schedule users may be admitted, which impacts the admitted users and results in overload and system congestionRecom mended.
0~100
0~1, step:0.01
8/7/2013
4043267
162734118.xls.ms_office1
HSUPA BE traffic Initial bit D8, D16, rate. When D32, D64, DCCC algorithm D128, switch and D144, HSUPA DCCC D256, SET algorithm switch Enumeratio D384, FRC(Optional) are enabled, the n Type D608, uplink initial bit D1440, rate will be set to D2048, this value if the D2880, uplink max bit D5740 rate is higher than the initial bit rate.
Interval Type
0~100
8/7/2013
4053267
162734118.xls.ms_office1
Threshold of all the HSUPA user PBR whose schedule priority is lower than that of users to be admitted. If this value is too high, the possibility of rejecting HSUPA schedule services Low priority ADD increases, which HsupaLowPri Interval HSUPA user CELLCAC(Opti impacts access orityUserPBR Type PBR threshold onal) success rate. If Thd the value is too low, too many HSUPA schedule users may be admitted, which impacts the admitted users and results in overload and system congestion. Length of SET smoothing filter LDM(Optional) window of HSUPA bit rate.
0~100
0~1, step:0.01
Interval Type
1~32
1~32
The minimum number of HSUPA RAB establish request per SPU to report KPI alarm. In a checking period,if the number of Minimum HSUPA RAB Number of SET establish request Interval HsupaRabEst HSUPA RAB KPIALMTHD( is higher than the Type AttMinNum Establish Optional) threshold and the Request HSUPA RAB setup successful ratio is lower than this threshold,the KPI alarm of HSUPA RAB setup ratio is reported.
0~65534
0~65534
8/7/2013
4063267
162734118.xls.ms_office1
Threshold of HSUPA RAB setup successful ratio per SPU to report KPI alarm. In a checking period,if the ratio Threshold of is lower than this HSUPA RAB SET threshold and the Interval HsupaRabEst Setup KPIALMTHD( Type number of SuccRatioThd Successful Optional) HSUPA RAB Ratio establish request is higher than the related threshold,the KPI alarm of HSUPA RAB setup ratio is reported.
0~100
0~100
UL activity SET factor of the Interval ADMCTRL(Op HSUPA Type tional) streaming service.
0~100
The total HSUPA ACT throughput of all Interval LICENSE(Opti the operators Type onal) cannot exceed that defined in the license file.
0~3910000
0 to 3910000
HSUPA auto ADD HSUPA auto retransmit load Interval HsupAuRetrn CELLLDM(Opt retransmit load release Type sLdRelThd ional) release threshold. threshold
0~100
0~1, step:0.01
8/7/2013
4073267
162734118.xls.ms_office1
HSUPA auto ADD HSUPA auto retransmit load Interval HsupAuRetrn CELLLDM(Opt retransmit load trigger Type sLdTrigThd ional) trigger threshold. threshold
0~100
0~1, step:0.01
The cell will shut down Cell Dynamic ADD automatically ShutDown CELLDYNSHU only when the Interval HsupaUserNu Hsupa User TDOWN(Optio HSUPA user Type mThd number nal) number is not Threshold greater than the threshold.
0~5
0~5
8/7/2013
4083267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
HSUPA HSUPA ADD background background pri HUBKGPRIT LOADEQ(Opti bearing primary path load H onal) path load threshold threshold.
Interval Type
0~100
0~100
8/7/2013
4093267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSUPA ADD HSUPA HUBKGSEC background TRMMAP(Opti background PATH secondary path onal) secondary path.
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
HSUPA ADD background pri HUBKGSEC LOADEQ(Opti sec path load WHT onal) ratio threshold
Interval Type
0~100
0~100
8/7/2013
4103267
162734118.xls.ms_office1
HSUPA HSUPA ADD background background HUBKGUL TRMFACTOR( service uplink service uplink Optional) factor factor.
Interval Type
0~100
0~100
8/7/2013
4113267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSUPA ADD HSUPA HUCONVPR conversational TRMMAP(Opti conversational IPATH primary path onal) primary path.
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
HSUPA HSUPA ADD conversational conversational HUCONVPR LOADEQ(Opti bearing primary pri path load ITH onal) path load threshold threshold.
Interval Type
0~100
0~100
8/7/2013
4123267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSUPA ADD HSUPA HUCONVSE conversational TRMMAP(Opti conversational CPATH secondary path onal) secondary path.
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
HSUPA HSUPA conversational conversational ADD primary HUCONVSE pri sec path LOADEQ(Opti secondary path CWHT load ratio onal) load ratio threshold threshold.
Interval Type
0~100
0~100
8/7/2013
4133267
162734118.xls.ms_office1
HSUPA HSUPA ADD conversational conversational TRMFACTOR( HUCONVUL service uplink service uplink Optional) factor factor.
Interval Type
0~100
0~100
HSUPA high priority ADD interactive LOADEQ(Opti bearing primary onal) path load threshold.
Interval Type
0~100
0~100
HSUPA high priority HSUPA high ADD interactive HUHIGHINT interactive pri LOADEQ(Opti primary ERACTSEC sec path load onal) secondary path WHT ratio threshold load ratio threshold.
Interval Type
0~100
0~100
8/7/2013
4143267
162734118.xls.ms_office1
HSUPA ADD HSUPA interactive Interval TRMFACTOR( interactive service HUINTERUL service uplink Type Optional) uplink factor. factor
0~100
0~100
8/7/2013
4153267
162734118.xls.ms_office1
HSUPA high ADD HSUPA high HUINTHGH PRI interactive TRMMAP(Opti PRI interactive PRIPATH primary path onal) primary path.
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
8/7/2013
4163267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSUPA high ADD HSUPA high HUINTHGH PRI interactive TRMMAP(Opti PRI interactive SECPATH secondary path onal) secondary path.
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
8/7/2013
4173267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, HSUPA low ADD HSUPA low PRI AF42, HUINTLOW PRI interactive TRMMAP(Opti interactive Enumeratio AF43, EF, PRIPATH primary path onal) primary path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
8/7/2013
4183267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, HSUPA low ADD HSUPA low PRI AF42, HUINTLOW PRI interactive TRMMAP(Opti interactive Enumeratio AF43, EF, SECPATH secondary path onal) secondary path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
8/7/2013
4193267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
8/7/2013
4203267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSUPA ADD HSUPA middle middle PRI HUINTMIDS TRMMAP(Opti PRI interactive interactive ECPATH onal) secondary path. secondary path
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
HSUPA low priority ADD interactive LOADEQ(Opti bearing primary onal) path load threshold.
Interval Type
0~100
0~100
HSUPA low priority HSUPA low ADD interactive HULOWINT interactive pri LOADEQ(Opti primary ERACTSEC sec path load onal) secondary path WHT ratio threshold load ratio threshold.
Interval Type
0~100
0~100
8/7/2013
4213267
162734118.xls.ms_office1
This parameter specifies whether ADD the alarm EMU(Optional) reporting for humidity is enabled. This parameter specifies the ADD upper threshold EMU(Optional) for humidity alarm. This parameter specifies the ADD lower threshold EMU(Optional) for humidity alarm.
String Type -
1~9 character
String Type -
1~9 character
HSUPA middle priority ADD interactive LOADEQ(Opti bearing primary onal) path load threshold.
Interval Type
0~100
0~100
HSUPA middle priority HSUPA mid ADD interactive HUMIDINTE interactive pri LOADEQ(Opti primary RACTSECW sec path load onal) secondary path HT ratio threshold load ratio threshold.
Interval Type
0~100
0~100
8/7/2013
4223267
162734118.xls.ms_office1
This parameter specifies the number of the UNI link corresponding to the high-end port. For the AEUa, the number ranges from 0 to 31. For ADD the AOUa in E1 High UNI link Interval HUNILNKN VPCLCX(Optio transmission No. Type nal) mode, the number ranges from 0 to 125. For the AOUa in T1 transmission mode, the number ranges from 0 to 167. The bearing UNI link is configured.
0~167
0 to 167
HSUPA IMS ADD HSUPA Signal HUSIPPRIPA Signal primary TRMMAP(Opti primary path. TH path onal)
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
8/7/2013
4233267
162734118.xls.ms_office1
HUSIPPRIT H
HSUPA IMS HSUPA IMS ADD Signal bearing Interval Signal pri path LOADEQ(Opti primary path load Type load threshold onal) threshold.
0~100
0~100
HSUPA IMS ADD HSUPA Signal HUSIPSECP Signal TRMMAP(Opti secondary path. ATH secondary path onal)
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
HSUPA IMS HSUPA IMS ADD Signal primary Signal pri sec HUSIPSECW LOADEQ(Opti secondary path path load ratio HT onal) load ratio threshold threshold.
Interval Type
0~100
0~100
8/7/2013
4243267
162734118.xls.ms_office1
HUSIPUL
HSUPA IMS ADD HSUPA IMS signal uplink TRMFACTOR( uplink factor. factor Optional)
Interval Type
0~100
0~100
8/7/2013
4253267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSUPA ADD HSUPA Signal HUSRBPRIP Signal primary TRMMAP(Opti primary path. ATH path onal)
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
HSUPA Signal HSUPA ADD bearing primary HUSRBPRIT Signal pri path LOADEQ(Opti path load H load threshold onal) threshold.
Interval Type
0~100
0~100
8/7/2013
4263267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSUPA ADD HSUPA Signal HUSRBSECP Signal TRMMAP(Opti secondary path. ATH secondary path onal)
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
HSUPA Signal HSUPA ADD primary Signal pri sec HUSRBSEC LOADEQ(Opti secondary path path load ratio WHT onal) load ratio threshold threshold.
Interval Type
0~100
0~100
8/7/2013
4273267
162734118.xls.ms_office1
HUSRBUL
ADD HSUPA signal HSUPA SRB TRMFACTOR( uplink factor uplink factor. Optional)
Interval Type
0~100
0~100
8/7/2013
4283267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, ADD HSUPA AF42, TRMMAP(Opti streaming primary Enumeratio AF43, EF, onal) path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
HSUPA ADD streaming bearing Interval LOADEQ(Opti primary path load Type onal) threshold.
0~100
0~100
8/7/2013
4293267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSUPA ADD HSUPA HUSTRMSE streaming TRMMAP(Opti streaming CPATH secondary path onal) secondary path.
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
HSUPA HSUPA ADD streaming primary streaming pri Interval HUSTRMSE LOADEQ(Opti secondary path sec path load Type CWHT onal) load ratio ratio threshold threshold.
0~100
0~100
8/7/2013
4303267
162734118.xls.ms_office1
HSUPA ADD HSUPA streaming Interval HUSTRMUL TRMFACTOR( streaming service service uplink Type Optional) uplink factor. factor
0~100
0~100
8/7/2013
4313267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
ADD HSUPA Voice HSUPA Voice HUVOICEPR TRMMAP(Opti primary path primary path. IPATH onal)
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
8/7/2013
4323267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
ADD HSUPA Voice HSUPA Voice HUVOICESE TRMMAP(Opti secondary path secondary path. CPATH onal)
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
8/7/2013
4333267
162734118.xls.ms_office1
HSUPA voice ADD HSUPA voice HUVOICEU service uplink TRMFACTOR( service uplink L factor Optional) factor.
Interval Type
0~100
0~100
HVCI
High VCI
This parameter ADD specifies the VCI Interval VPCLCX(Optio of the high-end Type nal) VCL.
32~65535
32 to 65535
HVPI
High VPI
This parameter specifies the VPI ADD of the high-end Interval VPCLCX(Mand VPL/VCL. If the Type atory) VPL is cross connected, VPI cannot be 0.
0~255
0 to 255
8/7/2013
4343267
162734118.xls.ms_office1
This parameter specifies the hysteresis value for event 1A. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of pingpong effect or ADD wrong decision. CELLINTRAF But the event REQHO(Option might not be Interval 1A hysteresis al) triggered in time. Type SET For the definition, INTRAFREQH refer to 3GPP TS O(Optional) 25.331. The value of this parameter is ranged from 2 dB to 5 dB. Event 1A is a key event that adds a cell to the active set. To ensure timely handover, the hysteresis of event 1A should be set a little
HystFor1A
0~15
0~7.5,Step: 0.5
8/7/2013
4353267
162734118.xls.ms_office1
This parameter specifies the hysteresis value for event 1B. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of pingpong effect or ADD wrong decision. CELLINTRAF But the event REQHO(Option might not be Interval 1B hysteresis al) triggered in time. Type SET For the definition, INTRAFREQH refer to 3GPP TS O(Optional) 25.331. The value of this parameter is ranged from 2 dB to 5 dB. In addition, this parameter is related to filter coefficient and trigger delay. As for the impact on network performance:
HystFor1B
0~15
0~7.5,Step: 0.5
8/7/2013
4363267
162734118.xls.ms_office1
This parameter specifies the hysteresis value for event 1C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of pingpong effect or ADD wrong decision. CELLINTRAF But the event REQHO(Option might not be Interval 1C hysteresis al) triggered in time. Type SET For the definition, INTRAFREQH refer to 3GPP TS O(Optional) 25.331. The value of this parameter is ranged from 2 dB to 5 dB. In addition, this parameter is related to filter coefficient and trigger delay. As for the impact on network performance:
HystFor1C
0~15
0~7.5,Step: 0.5
8/7/2013
4373267
162734118.xls.ms_office1
This parameter specifies the hysteresis value for event 1D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of pingpong effect or ADD wrong decision. CELLINTRAF But the event REQHO(Option might not be Interval 1D hysteresis al) triggered in time. Type SET For the definition, INTRAFREQH refer to 3GPP TS O(Optional) 25.331. The value of this parameter is ranged from 2 dB to 5 dB. In addition, this parameter is related to filter coefficient and trigger delay. As for the impact on network performance:
HystFor1D
0~15
0~7.5,Step: 0.5
8/7/2013
4383267
162734118.xls.ms_office1
This parameter specifies the hysteresis value for event 1F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of pingpong effect or ADD wrong decision. CELLINTRAF But the event REQHO(Option might not be Interval al) triggered in time. Type SET For the definition, INTRAFREQH refer to 3GPP TS O(Optional) 25.331. The value of this parameter is ranged from 2 dB to 5 dB. In addition, this parameter is related to filter coefficient and trigger delay. As for the impact on network performance:
HystFor1F
1F hysteresis
0~15
0~7.5,Step: 0.5
8/7/2013
4393267
162734118.xls.ms_office1
This parameter specifies the hysteresis value for event 1J. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of pingpong effect or ADD wrong decision. CELLINTRAF But the event REQHO(Option might not be Interval al) triggered in time. Type SET For the definition, INTRAFREQH refer to 3GPP TS O(Optional) 25.331. The value of this parameter is ranged from 2 dB to 5 dB. In addition, this parameter is related to filter coefficient and trigger delay. As for the impact on network performance:
HystFor1J
1J hysteresis
0~15
0~7.5,Step: 0.5
8/7/2013
4403267
162734118.xls.ms_office1
Hysteresis value for the event 2B. The value of this parameter correlates with slow fading. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be resisted, but the speed of the handover algorithm to respond to signal change becomes lower, and therefore event 2B might not be triggered in time. Hysteresis value for the event 2C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be resisted, but the speed of the handover algorithm to respond to signal change becomes lower, and therefore event 2B might not be triggered in time.
HystFor2B
Interval Type
0~29
0~14.5,Step :0.5
Hystfor2C
ADD CELLINTERFR EQHONCOV( Optional) SET INTERFREQH 2C hysteresis ONCOV(Option al) ADD CELLMBDRIN TERFREQ(Opti onal)
Interval Type
0~29
0~14.5,Step :0.5
8/7/2013
4413267
162734118.xls.ms_office1
Hysteresis value for the event 2D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the smaller probability of ping-pong effect or wrong decision, but event 2D might not be triggered in time. Interval In periodical Type report mode, this parameter is used to resist the pingpong effect of event 2D (the quality of the currently used frequency is lower than the threshold) and event 2F (the estimated quality of the currently used frequency is higher than the
HystFor2D
ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional 2D hysteresis ) ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)
0~29
0~14.5,Step :0.5
8/7/2013
4423267
162734118.xls.ms_office1
Hysteresis value for the event 2F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the smaller probability of ping-pong effect or wrong decision, but event 2F might not be triggered in time. Interval In periodical Type report mode, this parameter is used to resist the pingpong effect of event 2D (the quality of the currently used frequency is lower than the threshold) and event 2F (the estimated quality of the currently used frequency is higher than the
HystFor2F
2F hysteresis
ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)
0~29
0~14.5,Step :0.5
8/7/2013
4433267
162734118.xls.ms_office1
Hysteresis value for the event 3A. The value of this parameter correlates with slow fading. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be avoided, but the speed of the Interval handover Type algorithm to respond to signal change becomes lower. If the interRAT handover hysteresis is set to an excessively high value, the GSM cell to which the UE is handed over must be of good quality. Therefore, the conditions for
Hystfor3A
0~15
0~7.5,Step: 0.5
8/7/2013
4443267
162734118.xls.ms_office1
Hysteresis value for the event 3C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be avoided, but the speed of the Interval handover Type algorithm to respond to signal change becomes lower. If the interRAT handover hysteresis is set to an excessively high value, the GSM cell to which the UE hands over must be of good quality. Therefore, the conditions for
Hystfor3C
ADD CELLINTERR ATHONCOV( Optional) SET INTERRATHO 3C hysteresis NCOV(Optional ) ADD CELLMBDRIN TERRAT(Optio nal)
0~15
0~7.5,Step: 0.5
8/7/2013
4453267
162734118.xls.ms_office1
Hysteresis value for inter-RAT measurement periodical reports. This parameter aims to prevent the mis-decision caused by unexpected jitters of signals during inter-RAT handover decisions. The HystforInterRAT and the interRAT handover Interval decision threshold Type determine whether to trigger inter-RAT handovers. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be avoided, but the speed of the
0~15
0~7.5,Step: 0.5
8/7/2013
4463267
162734118.xls.ms_office1
Hysteresis for inter-frequency hard handover in periodical report mode. This parameter is used to estimate the interfrequency handover at the RNC. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be resisted, but the speed of the handover algorithm to respond to signal change becomes lower, and therefore event 2B might not be triggered in time. After a connection is established successfully, the timer is started. If the timer does not receive the detection message when the timer expires, the connection will be released.
ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLMBDRIN TERFREQ(Opti onal)
Interval Type
0~29
0~14.5,Step :0.5
IARXTMR
Inactive RX timer
Interval Type
180~1260
180~1260
IATXTMR
Inactive TX timer
After a connection is established successfully, the SET timer is started. Interval SCCPTMR(Opt When the timer Type ional) expires, a detection message will be sent to the peer end.
60~600
60~600
8/7/2013
4473267
162734118.xls.ms_office1
The ICMP ADD ICMP packet Packet length ICMPPKGLE IPPATH(Option Length include the IP N al) header length.
Interval Type
44~1024
44~1024
ID
Task ID
This parameter STR specifies the ID Interval SCHTSK(Optio of the scheduled Type nal) task to be started.
Indicating whether the UE in idle mode is allowed to access the cell. When the cell status is BARRED, it indicates that the ADD BARRED, BARRED, UEs in idle mode CELLACCESS Enumeratio NOT_BAR NOT_BAR are barred to STRICT(Manda RED RED select/reselect the n Type tory) cell even in the case of emergency calls. For detailed information of this parameter, refer to 3GPP TS 25.331.
8/7/2013
4483267
162734118.xls.ms_office1
Indicating whether the UE in idle mode is allowed to reselect another intra-frequency cell. This parameter is valid when [Cell barred indicator for SIB3] is BARRED. If this parameter is ALLOWED, the ADD UE in idle mode Intra-freq cell ALLOWED ALLOWED CELLACCESS can select another IdleIntraFreq reselection ind Enumeratio , , STRICT(Option intra-frequency Reselection for SIB3 n Type NOT_ALL NOT_ALL al) cell when the cell OWED OWED selection/reselecti on condition is satisfied. If this parameter is NOT_ALLOWE D, the UE in idle mod cannot select another intrafrequency cell. The indicator can be neglected in case of emergency calls. For detailed
8/7/2013
4493267
162734118.xls.ms_office1
The hysteresis value of the serving FDD cells in idle mode in case the quality measurement for cell selection and reselection is set to CPICH RSCP. It is related to the slow fading feature of the area where the cell is located. The greater the slow ADD fading variance Interval CELLSELRES is, the greater this Type EL(Optional) parameter. According to the R regulation, the current serving cell involves in cell selection after the measurement value is added with the hysteresis value. The measurement hysteresis aims to prevent the pingpong effect of the
IdleQhyst1s
0~20
0~40, step:2
8/7/2013
4503267
162734118.xls.ms_office1
The hysteresis value of the serving FDD cells in idle mode in case the quality measurement for cell selection and reselection is set to CPICH Ec/No. It is related to the slow fading feature of the area where the cell is located. The greater the slow ADD fading variance Interval CELLSELRES is, the greater this Type EL(Optional) parameter. It is optional. If it is not configured, [Hysteresis 1] will be adopted as the value. This parameter is not configured when its value is 255. According to the R regulation, the current serving cell involves in cell selection after the
IdleQhyst2s
0~20,255
8/7/2013
4513267
162734118.xls.ms_office1
Offset of cell CPICH RSCP measurement value in cell selection or reselection when the UE is in idle mode. Offset of neighboring cell CPICH measurement value. This parameter is used for RSSI measurement. Interval The offset is Type subtracted from the neighboring cell measurement value before cell reselection. This parameter defines the offset of cell CPICH RSCP measurement value in cell selection or reselection when the UE is in idle mode.
-50~50
-50~50
8/7/2013
4523267
162734118.xls.ms_office1
Offset of cell CPICH Ec/No measurement value in cell selection or reselection when the UE is in idle mode. Offset of neighboring cell CPICH measurement value This parameter is used for Ec/No measurement. Interval The offset is Type subtracted from the neighboring cell measurement value before cell reselection. In cell reselection algorithm, this parameter is used for moving the border of a cell. This parameter can be configured by the network planner according to reality.
-50~50
-50~50
8/7/2013
4533267
162734118.xls.ms_office1
Threshold for inter-frequency cell reselection in idle mode. When the quality (CPICH Ec/No measured by UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the interfrequency cell reselection Inter-freq cell procedure will be ADD reselection started. This Interval IdleSintersear CELLSELRES threshold for parameter is not Type ch EL(Optional) idle mode configured when its value is 127. The intrafrequency cell reselection has a priority higher than the interfrequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection start threshold should be higher
8/7/2013
4543267
162734118.xls.ms_office1
Threshold for intra-frequency cell reselection in idle mode. When the quality (CPICH Ec/No measured by the UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the intrafrequency cell Intra-freq cell reselection ADD reselection procedure will be Interval IdleSintrasear CELLSELRES threshold for started. This Type ch EL(Optional) idle mode parameter is not configured when its value is 127. The intrafrequency cell reselection has a priority higher than the interfrequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection start threshold
8/7/2013
4553267
162734118.xls.ms_office1
IdleTbarred
This parameter is valid when [Cell barred indicator for SIB3] is BARRED. It indicates that the delay of the cell can be measured next time when [Cell barred indicator for SIB4] is set to D10, D20, ADD BARRED. The D40, D80, 10, 20, 40, CELLACCESS greater the value, D160, 80, 160, Enumeratio STRICT(Option the lower the D320, 320, 640, n Type al) frequency of the D640, 1280 UE trying to read D1280 the cell bar status. The smaller the value, the higher the frequency of the UE trying to read the cell bar status. For detailed information, refer to 3GPP TS 25.331.
IDLETMR
Timer_Idle
Interval for ADD sending the SAALLNK(Opt POLL message ional) when no data is transmitted.
Interval Type
8/7/2013
4563267
162734118.xls.ms_office1
After the coverage based handover succeeds, to avoid the handover of the UE to another frequency due to the following factors: overload, speed estimation, MBMS channel reselection, and QoS, frequent handovers occur. The RNC will SET start the interInterval HOCOMM(Opt frequency nonType ional) coverage based anti-ping-pong timer and prohibit the handover or measurement caused by the previous factors before the timeout of the timer. The larger this parameter, the better effect the anti-frequent handover. This, however, will
The timer length of anti IFAntiPingpa pingpong ngTimerLengt NCOV h interfreq handover
0~120
0~120
IgorTmr
TigOR
CN flow control timer (short). The SET OVERLOAD Interval IUTIMERAND message received Type NUM(Optional) repeatedly in this period will be discarded.
5000~3000 5000~3000 0 0
8/7/2013
4573267
162734118.xls.ms_office1
ADD IMAGRP(Mand atory) ADD FRALNK(Mand atory) ADD IMALNK(Mand atory)
IMAGRPN
Interval Type
0~83
0 to 31(AEUa),0 to 83(AOUa)
IMAID
IMA ID
ADD This parameter Interval IMAGRP(Optio specifies the IMA Type nal) ID.
0~255
0 to 255
8/7/2013
4583267
162734118.xls.ms_office1
IMALNKN
Interval Type
0~167
0 to 167
IMAVER
ADD This parameter IMA protocol IMAGRP(Optio specifies the IMA Enumeratio V1.0, V1.1 V1.0, V1.1 version nal) protocol version. n Type
8/7/2013
4593267
162734118.xls.ms_office1
This parameter specifies whether it is allowed to use the initial rate of IMS signaling set on the LMT, that is, the value of [Ims initial rate]. - ON: If the IMS signaling is SET carried on the FRC(Optional) DCH, the maximum rate of IMS signaling takes the value of [Ims initial rate]. - OFF: The maximum rate of IMS signaling does not take the value of [Ims initial rate]. This parameter specifies the channel type of IMS signaling. - DCH: Both uplink and downlink are preferably carried on DCH. SET - HSDPA: Uplink FRCCHLTYPE is preferably PARA(Optional carried on DCH, ) and downlink is preferably carried on HS-DSCH. - HSPA: Uplink is preferably carried on EDCH, and downlink is preferably carried
OFF, ON
ImsChlType
DCH(UL_D CH,DL_DC H), DCH, HSDPA(UL Enumeratio HSDPA, _DCH,DL_ n Type HSPA HSDSCH), HSPA(UL_ EDCH,DL_ HSDSCH)
8/7/2013
4603267
162734118.xls.ms_office1
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Interval Enhanced CELLEFACH( Type CELL_FACH Optional) state, this parameter determines the guaranteed speed of the MAC-c flow that sends IMS data on the Iub interface.
IMSGBR
1~1000
1~1000
IMSI
IMSI ID
String Type -
ImsiMax
ADD The maximum of IMSISNAMAP( String Type one IMSI range. Mandatory)
ImsiMin
ADD The minimum of IMSISNAMAP( String Type one IMSI range. Mandatory)
8/7/2013
4613267
162734118.xls.ms_office1
This parameter specifies the initial access rate of IMS signaling. When the [Ims Bear enhanced switch] is ON: - If the IMS signaling is carried on the DCH in the downlink, the SET initial rate takes FRC(Mandatory the larger value Enumeratio D32, D64 ) between this n Type parameter and the CN-assigned bit rate. - If the IMS signaling is carried on the HSPA, the MBR takes the larger value between this parameter and the CNassigned bit rate.
32, 64
ImsiRtMax
Interval Type
0~999
0~999
ImsiRtMin
Interval Type
0~999
0~999
8/7/2013
4623267
162734118.xls.ms_office1
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Interval Enhanced CELLEFACH( Type CELL_FACH Optional) state, this parameter determines the maximum speed of the MAC-c flow that sends IMS data on the Iub interface.
IMSMBR
1~2000
1~2000
If data is not transmitted on the EDCH for several consecutive EDCH TTIs, the interval at which two consecutive patterns are transmitted on the UL DPCCH should be Threshold For changed from D1, D4, SET DPCCH DtxCycle1 to D8, D16, InactThsForC DTXDRXPAR Enumeratio 1,4,8,16,32, Transmission DtxCycle2. Here, D32, D64, ycle2 A(Optional) n Type 64,128,256 Cycle 2 the value of D128, D256 DtxCycle2 is an integer multiple of the value of DtxCycle1. This parameter specifies the number of EDCH TTIs. For details, refer to the 3GPP TS 25.331 protocol.
8/7/2013
4633267
162734118.xls.ms_office1
This parameter specifies the number of consecutive subframes that the UE should monitor on each DRX SET HS-SCCH of the Inactivity DTXDRXPAR HS-SCCH set Threshold A(Optional) immediately after the data reception on the HS-SCCH or HS-PDSCH. For details, refer to the 3GPP TS 25.331 protocol. This parameter specifies the number of subframes that the UE should monitor on the EInactivity AGCH of the SET Threshold for serving radio link DTXDRXPAR UE Grant and on the EA(Optional) Monitoring RGCH of each radio link after the data transmission on the EDCH. For details, refer to the 3GPP TS This parameter Enable specifies whether Infrared Sensor ADD the alarm Alarm EMU(Optional) reporting for Reporting infrared sensor is enabled.
InactThsForD rxCycle
D0, D1, D2, D4, D8, 0,1,2,4,8,16, Enumeratio D16, D32, 32,64,128,2 n Type D64, D128, 56,512 D256, D512
InactThsForG rantMonitorin g
D0, D1, D2, D4, D8, 0,1,2,4,8,16, Enumeratio D16, D32, 32,64,128,2 n Type D64, D128, 56 D256
INFRA_RED _MASK
8/7/2013
4643267
162734118.xls.ms_office1
INHT
Inhibit Type
This parameter LOGIC(Log LOGIC(Log INH specifies the ic inhibit), ic inhibit), BRD(Mandator inhibit type Enumeratio PHYSICAL PHYSICAL y) (Physical inhibit, n Type (Physical (Physical Logic inhibit). inhibit) inhibit)
INHTMR
Timer_NOCREDIT
ADD Maximum Interval SAALLNK(Opt allowed no-credit Type ional) time length.
1200~2000 1200~2000
SET UIA(Optional)
The integrity protection algorithm Bit Field supported by Type RNC. Only UIA1 is supported currently.
UIA1
For each switch of this parameter, the value can be: ON or OFF.
8/7/2013
4653267
162734118.xls.ms_office1
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Enhanced CELLEFACH( CELL_FACH Optional) state, this parameter determines the guaranteed speed of the MAC-c flow that sends interactive service data on the Iub interface. The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Enhanced CELLEFACH( CELL_FACH Optional) state, this parameter determines the maximum speed of the MAC-c flow that sends interactive service data on the Iub interface.
Interval Type
1~1000
1~1000
INTERACT MBR
Interval Type
1~2000
1~2000
8/7/2013
4663267
162734118.xls.ms_office1
ADD CELLMBDRIN InterFreqActi MBDR switch MBDR switch. TERFREQ(Opti veType onal)
CSAMR_I NTERFRE Q(CS AMR interfrequency switch), CSNONAM R_INTERF REQ(CS non AMR interfrequency switch), PSR99_INT ERFREQ(P SR99 interfrequency switch), PSHSPA_I NTERFRE Q(PSHSPA interfrequency switch)
Threshold of signal quality of the target frequency for triggering interfrequency measurement. Inter-freq This parameter is ADD measure target used to set CELLINTERFR Interval InterFreqCov frequency measurement EQHONCOV( Type HOThdEcN0 trigger Ec/No control on the Optional) THD event 2C. The event 2C is triggered when the signal quality of the target frequency is above this threshold.
-24~0
-24~0
8/7/2013
4673267
162734118.xls.ms_office1
Threshold to trigger interfrequency measurement with measurement quantity of Ec/No for CS domain services. The interfrequency measurement start Ec/No threshold (namely, compressed mode start threshold) is one of the key Interval parameters in the Type inter-frequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors:
-24~0
-24~0
8/7/2013
4683267
162734118.xls.ms_office1
Threshold to trigger interfrequency measurement with measurement quantity of RSCP for CS domain services. The interfrequency measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key Interval parameters in the Type inter-frequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors:
-115~-25
-115~-25
8/7/2013
4693267
162734118.xls.ms_office1
Threshold to stop inter-frequency measurement with measurement quantity of Ec/No for CS domain services. The interfrequency measurement stop Ec/No threshold (namely, compressed mode stop threshold) is one of the key parameters in the Interval inter-frequency Type handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: moving speed of
-24~0
-24~0
8/7/2013
4703267
162734118.xls.ms_office1
Threshold to stop inter-frequency measurement with measurement quantity of RSCP for CS domain services. The interfrequency measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the Interval inter-frequency Type handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the moving speed
-115~-25
-115~-25
8/7/2013
4713267
162734118.xls.ms_office1
This parameter is the relative threshold of cell for judging whether downlink MBDR algorithm of inter frequency is in overload state. It represents the percentage of the cell admission control threshold of downlink. The smaller this ADD parameter is, the CELLMBDRIN earlier downlink Interval TERFREQ(Opti MBDR algorithm Type onal) of inter frequency goes into overload state. When cell load is higher than the product of downlink cell admission control threshold and this parameter, and is lower than the downlink cell admission control threshold, downlink MBDR algorithm of inter
0~100
0~100
8/7/2013
4723267
162734118.xls.ms_office1
L3 filtering coefficient for the inter-frequency measurement. The physical meaning of this parameter is the same as the measurement model and intrafrequency measurement. The difference is D0, D1, that the report D2, D3, D4, period for the D5, D6, D7, inter-frequency 0,1,2,3,4,5,6 Enumeratio D8, D9, measurement is ,7,8,9,11,13, n Type D11, D13, 480 ms, whereas 15,17,19 D15, D17, the report period D19 for the intrafrequency measurement is 200 ms. In practice, it can be adjusted according to traffic performance measurement. The larger the value of this parameter, the
ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLINTERFR EQHONCOV( Optional) SET INTERFREQH ONCOV(Option al) ADD CELLMBDRIN TERFREQ(Opti onal)
8/7/2013
4733267
162734118.xls.ms_office1
According to the cell interfrequency hierarchical selection, the RNC chooses the proper interINTER_FR frequency EQ_COV(C measurement overagecontrol based interparameters to frequency implement handover), coverage, speed INTER_FR estimation, and EQ_COV_ traffic absorption. NCOV(Cov Inter-freq ADD INTER_FREQ_C erage-based InterFreqHOS handover type CELLHOCOM Enumeratio OV: coverageand nonwitch switch M(Optional) n Type based intercoveragefrequency based interhandover. RAT INTER_FREQ_C handover), OV_NCOV: INTER_FR coverage-based EQ_TA(Tra inter-frequency ffic-based handover, and internon-coveragefrequency based interhandover) frequency handover triggered by speed estimation. INTER_FREQ_T
8/7/2013
4743267
162734118.xls.ms_office1
Threshold to trigger interfrequency measurement with measurement quantity of Ec/No for PS domain HSPA services. The interfrequency measurement start Ec/No threshold (namely, compressed mode start threshold) is one of the key Interval parameters in the Type inter-frequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors:
-24~0
-24~0
8/7/2013
4753267
162734118.xls.ms_office1
Threshold to trigger interfrequency measurement with measurement quantity of RSCP for PS domain HSPA services. The interfrequency measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key Interval parameters in the Type inter-frequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors:
-115~-25
-115~-25
8/7/2013
4763267
162734118.xls.ms_office1
Threshold to stop inter-frequency measurement with measurement quantity of Ec/No for PS domain HSPA services. The interfrequency measurement stop Ec/No threshold (namely, compressed mode stop threshold) is one of the key parameters in the Interval inter-frequency Type handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: moving speed of
-24~0
-24~0
8/7/2013
4773267
162734118.xls.ms_office1
Threshold to stop inter-frequency measurement with measurement quantity of RSCP for PS domain HSPA services. The interfrequency measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the Interval inter-frequency Type handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the moving speed
-115~-25
-115~-25
8/7/2013
4783267
162734118.xls.ms_office1
Indicating whether the interfrequency/RAT measurement control information should be delivered through the system information. When a UE in the CELL_FACH NOT_REQ state receives the UIRE, FACH INTER_FR Intermeasurement ADD EQ, freq/Inter-RAT occasion info InterFreqInter CELLMEAS(O Enumeratio INTER_RA Meas Ctrl Info message and in RatMeasInd ptional) n Type T, Ind the message the INTER_FR inter-frequency EQ_AND_I FDD NTER_RA measurement T indicator is set to TRUE, the UE performs interfrequency measurement and cell reselection assessment according to the inter-frequency neighboring cell list in the SIB11
8/7/2013
4793267
162734118.xls.ms_office1
Measurement quantity used in measurementbased interfrequency DRD in event (2C) triggered or periodical reporting mode. - CPICH: Common Pilot Channel - Ec/No: Signal-toNoise Ratio ADD - RSCP: Received CELLMBDRIN Signal Code Enumeratio TERFREQ(Opti Power n Type onal) - CPICH_Ec/No: to use the Ec/No measurement quantity for event 2C or InterFrequency periodical measurement. The physical unit is dB. - CPICH_RSCP: to use the RSCP measurement quantity for event 2C or Inter-
8/7/2013
4803267
162734118.xls.ms_office1
Timer length for inter-frequency measurement. After interfrequency measurement starts, if no interfrequency handover is performed when this timer expires, the interfrequency measurement and the compressed mode (if started) Interval are stopped. The Type value 0 indicates the timer is not to be enabled. This parameter is used to prevent the long interfrequency measurement state (compressed mode) due to unavailable measurement of the target cells that meet the handover When it is checked, system supports interfrequency neighboring detect function.
ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD Inter-freq CELLINTERFR InterFreqMea measure timer EQHONCOV( sTime length Optional) SET INTERFREQH ONCOV(Option al) ADD CELLMBDRIN TERFREQ(Opti onal)
0~512
0~512
OFF,ON
8/7/2013
4813267
162734118.xls.ms_office1
Threshold of signal quality of the target frequency for triggering interfrequency measurement. This parameter is used to set measurement control on the event 2C. The event 2C is triggered when the signal quality of the target frequency is above this threshold. Threshold to trigger interfrequency measurement with measurement quantity of Ec/No for PS domain non-HSPA services. The interfrequency measurement start Ec/No threshold (namely, compressed mode start threshold) is one of the key parameters in the inter-frequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the
Interval Type
-24~0
-24~0
ADD CELLINTERFR Inter-freq R99 EQHOCOV(Op InterFreqR99 PS measure tional) PsThd2DEcN start Ec/No SET 0 THD INTERFREQH OCOV(Optional )
Interval Type
-24~0
-24~0
8/7/2013
4823267
162734118.xls.ms_office1
Threshold to trigger interfrequency measurement with measurement quantity of RSCP for PS domain non-HSPA services. The interfrequency measurement start RSCP threshold (namely, compressed mode start threshold) is Interval one of the key Type parameters in the inter-frequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the
ADD CELLINTERFR Inter-freq R99 EQHOCOV(Op InterFreqR99 PS measure tional) PsThd2DRSC start RSCP SET P THD INTERFREQH OCOV(Optional )
-115~-25
-115~-25
8/7/2013
4833267
162734118.xls.ms_office1
Threshold to stop inter-frequency measurement with measurement quantity of Ec/No for PS domain non-HSPA services. The interfrequency measurement stop Ec/No threshold (namely, compressed mode stop threshold) is one of the key Interval parameters in the Type inter-frequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors:
ADD CELLINTERFR Inter-freq R99 EQHOCOV(Op InterFreqR99 PS measure tional) PsThd2FEcN stop Ec/No SET 0 THD INTERFREQH OCOV(Optional )
-24~0
-24~0
8/7/2013
4843267
162734118.xls.ms_office1
Threshold to stop inter-frequency measurement with measurement quantity of RSCP for PS domain non-HSPA services. The interfrequency measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key Interval parameters in the Type inter-frequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors:
ADD CELLINTERFR Inter-freq R99 EQHOCOV(Op InterFreqR99 PS measure tional) PsThd2FRSC stop RSCP SET P THD INTERFREQH OCOV(Optional )
-115~-25
-115~-25
8/7/2013
4853267
162734118.xls.ms_office1
Cell-level switch for interfrequency and inter-RAT handover. INTERFREQ: only measuring inter-frequency cells and performing interfrequency handover. INTERRAT: only measuring GSM cells and Inter-freq and ADD performing interInterFreqRAT Inter-RAT CELLHOCOM Enumeratio RAT handover . Switch coexist switch M(Optional) n Type SIMINTERFREQ RAT: measuring both interfrequency and inter-RAT cells, performing interfrequency or interRAT handover according to the type of the cell that first meets the handover decision condition. The parameter
INTERFRE Q(interfrequency handover only), INTERRAT (inter-RAT handover only), SIMINTER FREQRAT( interfrequency and interRAT handover)
8/7/2013
4863267
162734118.xls.ms_office1
Inter-frequency measurement report mode. PERIODICAL_R EPORTING: periodical interfrequency measurement report EVENT_TRIGG ER: eventtriggered interfrequency measurement report There are two inter-frequency handover report modes in the RNC, namely, event-triggered measurement report and periodical measurement report. The report mode is selected by setting the inter-frequency report mode switch that is RNC-oriented. This parameter is used to increase time of interfreqency reselection. It is not configured when its value is 255. For detailed inforamtion, refer to 3GPP TS 25.304.
ADD CELLINTERFR EQHOCOV(Op tional) InterSET frequency INTERFREQH InterFreqRep measure report OCOV(Optional ortMode mode ) ADD CELLMBDRIN TERFREQ(Opti onal)
PERIODIC AL_REPO RTING(Peri Enumeratio odical n Type reporting), EVENT_T RIGGER(E vent trigger)
Inter-freqency ADD InterFreqTres scaling factor CELLSELRES elScalingFact for reselection EL(Optional) or delay
Interval Type
4~19,255
8/7/2013
4873267
162734118.xls.ms_office1
This parameter is the relative threshold of cell for judging whether uplink MBDR algorithm of inter frequency is in overload state. It represents the percentage of the cell admission control threshold of uplink. The smaller this ADD parameter is, the CELLMBDRIN earlier uplink Interval TERFREQ(Opti MBDR algorithm Type onal) of inter frequency goes into overload state. When cell load is higher than the product of uplink cell admission control threshold and this parameter, and is lower than the uplink cell admission control threshold, uplink MBDR algorithm of inter frequency
0~100
0~100
This parameter specifies whether SET inter-RAT Inter RAT InterPlmnHo OPERATORSH handover of the Inter Plmn Ho Enumeratio NO, YES AllowedInter ARINGMODE( UE among Allowed n Type Rat Optional) different operators is allowed.
NO,YES
8/7/2013
4883267
162734118.xls.ms_office1
This parameter specifies whether SET intra-RAT Intra RAT InterPlmnHo OPERATORSH handover of the Inter Plmn Ho Enumeratio NO, YES AllowedIntra ARINGMODE( UE among Allowed n Type Rat Optional) different operators is allowed.
NO,YES
ADD CELLMBDRIN InterRatActiv MBDR switch MBDR switch. TERRAT(Optio eType nal)
ADD CELLINTERR Inter-RAT CS ATHOCOV(Op InterRATCST measure start tional) hd2DEcN0 Ec/No THD SET INTERRATHO COV(Optional)
Threshold to trigger inter-RAT measurement with measurement quantity of Ec/No for CS domain services. The inter-RAT measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key parameters in the inter-RAT Interval handover policy. Type This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the speed of the UE and the cell
-24~0
-24~0
8/7/2013
4893267
162734118.xls.ms_office1
Threshold to trigger inter-RAT measurement with measurement quantity of RSCP for CS domain services. For CS domain services, when RSCP is used as the measurement quantity for interRAT measurement, the RNC sends the signaling to Interval activate Type compressed mode and start interRAT measurement, if the UE reports the event 2D when the measured value is smaller than the value of this parameter. If you want to start the compressed mode earlier, set the threshold for
ADD CELLINTERR Inter-RAT CS ATHOCOV(Op InterRATCST measure start tional) hd2DRSCP RSCP THD SET INTERRATHO COV(Optional)
-115~-25
-115~-25
8/7/2013
4903267
162734118.xls.ms_office1
Threshold to stop inter-RAT measurement with measurement quantity of Ec/No for CS domain services. The inter-RAT measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the inter-RAT Interval handover policy. Type This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the speed of the UE and the cell
ADD CELLINTERR Inter-RAT CS ATHOCOV(Op InterRATCST measure stop tional) hd2FEcN0 Ec/No THD SET INTERRATHO COV(Optional)
-24~0
-24~0
8/7/2013
4913267
162734118.xls.ms_office1
ADD CELLINTERR Inter-RAT CS ATHOCOV(Op InterRATCST measure stop tional) hd2FRSCP RSCP THD SET INTERRATHO COV(Optional)
Threshold to stop inter-RAT measurement with measurement quantity of RSCP for CS domain services. For CS domain services, when RSCP is used as the measurement quantity for interRAT Interval measurement, the Type RNC sends the signaling to deactivate compressed mode and stop interRAT measurement, if the UE reports the event 2F when the measured value is larger than the value of this parameter.
-115~-25
-115~-25
8/7/2013
4923267
162734118.xls.ms_office1
This parameter is the relative threshold of cell for judging whether downlink MBDR algorithm of inter RAT is in overload state. It represents the percentage of the cell admission control threshold of downlink. The smaller this ADD parameter is, the CELLMBDRIN earlier downlink Interval TERRAT(Optio MBDR algorithm Type nal) of inter RAT goes into overload state. When cell load is higher than the product of downlink cell admission control threshold and this parameter, and is lower than the downlink cell admission control threshold, downlink MBDR algorithm of inter
0~100
0~100
8/7/2013
4933267
162734118.xls.ms_office1
L3 filtering coefficient for inter-RAT measurement. The larger the value of this parameter, the stronger the smoothing effect and the higher the anti-fast-fading capability, but the lower the signal change tracing capability. If the value of this Enumeratio parameter is set n Type too small, unnecessary intersystem handovers may occur. The parameter has the same physical meaning and measurement model as the interfrequency measurement L3 filter coefficient. The report period is 480 ms. For specific analysis,
ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional) ADD CELLINTERR ATHONCOV( Optional) SET INTERRATHO NCOV(Optional ) ADD CELLMBDRIN TERRAT(Optio nal)
D0, D1, D2, D3, D4, D5, D6, D7, 0,1,2,3,4,5,6 D8, D9, ,7,8,9,11,13, D11, D13, 15,17,19 D15, D17, D19
8/7/2013
4943267
162734118.xls.ms_office1
The maximum number of attempts to perform noncoverage-based inter-RAT handovers. This parameter specifies the maximum number of attempts for the RNC to perform interRAT handovers after a noncoverage-based inter-RAT handover failure. The handover attempts should involve the target cells that have not been tried but satisfy the handover conditions. This parameter specifies whether the inter-RAT handover, for example, to the GSM network, is performed when the RNC cannot meet the accuracy requirements of the emergency calls for the LCS. This parameter enables emergency calls to obtain the LCS of significant accuracy in a different system.
ADD CELLINTERR ATHONCOV( Inter-RAT Optional) InterRATHO handover max SET Attempts attempt times INTERRATHO NCOV(Optional )
Interval Type
1~16
1~16
NO, YES
8/7/2013
4953267
162734118.xls.ms_office1
Quality requirement for the inter-RAT cell during an inter-RAT handover with CS domain services. This parameter is used to set measurement control on the event 3C. The event 3C is triggered when ADD the signal quality Inter-RAT CS CELLMBDRIN of the target Interval InterRATHO handover TERRAT(Optio frequency is Type Thd decision THD nal) above this threshold. Note that the value 0 indicates that the physical value is smaller than -110 dBm. If the periodical report mode is used, the interRAT handover decision thresholds are used for the assessment of
0~63
This parameter specifies the type of inter-RAT handover that is SET DRD, DRD, Inter-Rat performed when InterRatHOT SMLC(Optional Enumeratio MEAS_BA MEAS_BA Handover Type the RNC cannot ype ) n Type SED SED meet the accuracy requirements of the emergency calls for the LCS.
8/7/2013
4963267
162734118.xls.ms_office1
Threshold to trigger inter-RAT measurement with measurement quantity of Ec/No for HSDPA services. The interfrequency measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key parameters in the Interval inter-RAT Type handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the speed of the
-24~0
-24~0
8/7/2013
4973267
162734118.xls.ms_office1
Threshold to trigger inter-RAT measurement with measurement quantity of RSCP for HSDPA services. For non-HSDPA services, when RSCP is used as the measurement quantity for interRAT measurement, the RNC sends the signaling to Interval activate Type compressed mode and start interRAT measurement, if the UE reports the event 2D when the measured value is smaller than the value of this parameter. If you want to start the compressed mode earlier, set the threshold for
-115~-25
-115~-25
8/7/2013
4983267
162734118.xls.ms_office1
Threshold to stop inter-RAT measurement with measurement quantity of Ec/No for HSDPA services. The inter-RAT measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the inter-RAT Interval handover policy. Type This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the speed of the UE and the cell
-24~0
-24~0
8/7/2013
4993267
162734118.xls.ms_office1
Threshold to stop inter-RAT measurement with measurement quantity of RSCP for HSDPA services. For HSDPA services, when RSCP is used as the measurement quantity for interRAT Interval measurement, the Type RNC sends the signaling to deactivate compressed mode and stop interRAT measurement, if the UE reports the event 2F when the measured value is larger than the value of this parameter.
-115~-25
-115~-25
8/7/2013
5003267
162734118.xls.ms_office1
Timer length for inter-RAT measurement. After inter-RAT measurement starts, if no interRAT handover is performed when this timer times out, the interRAT measurement is stopped. In addition, the compressed mode is deactivated, if Interval any; If the value Type is 0, you can infer that the interRAT measurement timer is not started. To set this parameter, you need to consider the following factors: This parameter aims to prevent that the handover conditions are not
ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional) ADD Inter-RAT CELLINTERR InterRATMea measure timer ATHONCOV( sTime length Optional) SET INTERRATHO NCOV(Optional ) ADD CELLMBDRIN TERRAT(Optio nal)
0~512
0~512
When it is SET checked, system NCELLDETEC supports inter-rat Enumeratio OFF, ON TSWITCH(Opti neighboring n Type onal) detect function.
OFF,ON
8/7/2013
5013267
162734118.xls.ms_office1
Quality requirement for the inter-RAT cell during an inter-RAT handover with CS domain services. This parameter is used to set measurement control on the event 3C. The ADD event 3C is CELLINTERR triggered when ATHONCOV( the signal quality Inter-RAT CS Optional) of the target Interval InterRATNC handover SET frequency is Type ovHOCSThd decision THD INTERRATHO above this NCOV(Optional threshold. Note ) that the value 0 indicates that the physical value is smaller than -110 dBm. If the periodical report mode is used, the interRAT handover decision thresholds are used for the assessment of
0~63
8/7/2013
5023267
162734118.xls.ms_office1
Quality requirement for the inter-RAT cell during an inter-RAT handover with PS domain services. This parameter is used to set measurement control on the event 3C. The ADD event 3C is CELLINTERR triggered when ATHONCOV( the signal quality Inter-RAT PS Optional) of the target Interval InterRATNC handover SET frequency is Type ovHOPSThd decision THD INTERRATHO above this NCOV(Optional threshold. Note ) that the value 0 indicates that the physical value is smaller than -110 dBm. If the periodical report mode is used, the interRAT handover decision thresholds are used for the assessment of
0~63
8/7/2013
5033267
162734118.xls.ms_office1
Interval that the UE reports interRAT measurement results to the RNC. In periodical NON_PERI report mode, the ODIC_REP interval between ORT(Non two reports is the periodical configured value. reporting), That is, the UE D250~1 submits reports at D500~2 intervals of the D1000~3 configured time. D2000~4 The value Enumeratio D3000~5 "NON_PERIODI n Type D4000~6 C_REPORT" is, D6000~7 however, not D8000~8 recommended. In D12000~9 this setting, the D16000~10 UE behavior is D20000~11 not defined. D24000~12 Because the GSM D28000~13 RSSI D32000~14 measurement D64000 period is 480 ms, the inter-RAT periodical report interval should be longer than 480 ms. If Threshold of Inter-RAT handover failure due to physical channel failure. When the times of Inter-RAT handover failures due to physical channel failure exceeds the Interval threshold, UE will Type be turned into penalty state. And no try of Inter-Rat handover will be taken until penalty finishes. Also see parameter PenaltyTimeForIn terRatPhyChFail.
ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional) ADD CELLMBDRIN TERRAT(Optio nal)
NON_PERI ODIC_REP ORT,250,50 0,1000,2000 ,3000,4000, 6000,8000,1 2000,16000, 20000,2400 0,28000,320 00,64000
ADD CELLINTERR ATHOCOV(Op tional) ADD CELLINTERR Inter-RAT HO ATHONCOV( physical InterRatPhyC Optional) channel failure hFailNum SET THD INTERRATHO COV(Optional) SET INTERRATHO NCOV(Optional )
0~63
0~63
8/7/2013
5043267
162734118.xls.ms_office1
Inter-RAT pingpong hysteresis. When a UE in the CS domain is handed over from a 2G network to a 3G network, the system increase 3A Hysteresis to prevent UE pingpong handover between the 2G network and the 3G network in the Interval period specified Type by this parameter. During the penalty time, the previous periodical report will be changed to the event 3A report. If this parameter is 0,the system will not start the pingpong handover punish timer.
ADD CELLINTERR ATHOCOV(Op Inter-RAT InterRATPing tional) PingPong Hyst PongHyst SET INTERRATHO COV(Optional)
0~15
0~7.5,Step: 0.5
8/7/2013
5053267
162734118.xls.ms_office1
Inter-RAT pingpong timer. When a UE in the CS domain is handed over from a 2G network to a 3G network, the system increase 3A Hysteresis to prevent UE pingpong handover between the 2G network and the 3G network in the Interval period specified Type by this parameter. During the penalty time, the previous periodical report will be changed to the event 3A report. If this parameter is 0,the system will not start the pingpong handover punish timer.
0~65535
0~65535
8/7/2013
5063267
162734118.xls.ms_office1
Threshold to trigger inter-RAT measurement with measurement quantity of Ec/No for PS domain non-HSDPA services. The interfrequency measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key Interval parameters in the Type inter-RAT handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors:
-24~0
-24~0
8/7/2013
5073267
162734118.xls.ms_office1
Threshold to trigger inter-RAT measurement with measurement quantity of RSCP for PS domain non-HSDPA services. For PS domain HSDPA services, when RSCP is used as the measurement quantity for interRAT measurement, the Interval RNC sends the Type signaling to activate compressed mode and start interRAT measurement, if the UE reports the event 2D when the measured value is smaller than the value of this parameter. If you want to start the compressed mode
-115~-25
-115~-25
8/7/2013
5083267
162734118.xls.ms_office1
Threshold to stop inter-RAT measurement with measurement quantity of Ec/No for PS domain non-HSDPA services. The inter-RAT measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the Interval inter-RAT Type handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the speed of the
-24~0
-24~0
8/7/2013
5093267
162734118.xls.ms_office1
Threshold to stop inter-RAT measurement with measurement quantity of RSCP for PS domain non-HSDPA services. For PS domain non-HSDPA services, when RSCP is used as the measurement quantity for interInterval RAT Type measurement, the RNC sends the signaling to deactivate compressed mode and stop interRAT measurement, if the UE reports the event 2F when the measured value is larger than the value of this parameter.
-115~-25
-115~-25
8/7/2013
5103267
162734118.xls.ms_office1
Inter-RAT measurement report mode. When PERIODICAL_R EPORTING is selected, you can infer that periodical interRAT measurement report is adopted; when EVENT_TRIGG ER is selected, you can infer that Enumeratio event-triggered n Type inter-RAT measurement report is adopted. The RNC includes two modes of the interRAT measurement report. The event triggered report and the periodical report are selected according to the inter-RAT measurement This parameter is used to increase time of inter-RAT reselection. It is Interval not configured when its value is Type 255. For detailed inforamtion, refer to 3GPP TS 25.304.
ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional) ADD CELLMBDRIN TERRAT(Optio nal)
Inter-RAT ADD InterRatTrese scaling factor CELLSELRES lScalingFacto for reselection EL(Optional) r delay
4~19,255
8/7/2013
5113267
162734118.xls.ms_office1
This parameter is the relative threshold of cell for judging whether uplink MBDR algorithm of inter RAT is in overload state. It represents the percentage of the cell admission control threshold of uplink. The smaller this parameter is, the earlier uplink MBDR algorithm of inter RAT goes into overload state. When cell load is higher than the product of uplink cell admission control threshold and this parameter, and is lower than the uplink cell admission control threshold, uplink MBDR algorithm of inter RAT is in This parameter specifies the interval for sending packets for starting the EthOAM loopback test.
Interval Type
0~100
0~100
INTERVAL
Interval Type
1~10
1 to 10
8/7/2013
5123267
162734118.xls.ms_office1
This parameter specifies the Ec/No absolute threshold of event 1F in the SHO algorithm, corresponding to the guarantee signal strength with QoS of basic service. The parameter affects the triggering of ADD event 1F. CELLINTRAF Event 1F is used 1F event REQHO(Option to trigger the Interval IntraAblThdF absolute EcNo al) emergency blind Type or1FEcNo threshold SET handover. If the INTRAFREQH best cell of the O(Optional) active set reports event 1F, which means that the active cell is very poor quality, then the blind handover is triggered as the last attempt before call drop. The emergency blind handover is a special occasion
-24~0
-24~0
8/7/2013
5133267
162734118.xls.ms_office1
This parameter specifies the RSCP absolute threshold of event 1F in the SHO algorithm, corresponding to the guarantee signal strength with the QoS of basic service. The parameter affects the triggering of ADD event 1F. CELLINTRAF Event 1F is used 1F event REQHO(Option to trigger the Interval IntraAblThdF absolute RSCP al) emergency blind Type or1FRSCP threshold SET handover. If the INTRAFREQH best cell of the O(Optional) active set reports event 1F, which means that the active cell is very poor quality, then the blind handover is triggered as the last attempt before call drop. The emergency blind handover is a special occasion
-115~-25
-115~-25
8/7/2013
5143267
162734118.xls.ms_office1
According to the 3GPP TS 25.331, the filtering of the measurement value is calculated using the following formula, where k represents this parameter: Fn = (1 - a) * Fn 1 + a * Mn Here, D0, D1, Fn: the updated D2, D3, D4, ADD filtered Intra-freq D5, D6, D7, CELLINTRAF measurement 0,1,2,3,4,5,6 IntraFreqFilte meas L3 filter Enumeratio D8, D9, REQHO(Option result ,7,8,9,11,13, rCoef coeff n Type D11, D13, al) Fn - 1: the old 15,17,19 D15, D17, filtered D19 measurement result Mn: the latest received measurement result from physical layer measurements a = (1/2)(k/2). When a is set to 1, this means L3 filtering will not be applied.
8/7/2013
5153267
162734118.xls.ms_office1
Identifying the period of the Intrafrequency load balance algorithm. When the cell load is SET high, the cell LDCPERIOD( PCPICH TX Optional) power can be Interval SET periodically Type SATLDCPERI reduced in order OD(Optional) to enable users in connected mode to be switched over to other cells more easily, thus reducing the local cell load.
1~86400
1~86400
8/7/2013
5163267
162734118.xls.ms_office1
Indicating whether the intrafrequency measurement control information should be delivered through the system information. Generally the cell should deliver the intra-frequency measurement control Intra-freq ADD REQUIRE, information. REQUIRE, IntraFreqMea Meas Ctrl Info CELLMEAS(O Enumeratio NOT_REQ When the intraNOT_REQ sInd Ind ptional) n Type UIRE frequency UIRE measurement control information (the preconfiguration of the measurement control) is delivered in the system, the UE can start the intrafrequency measurement and send the measurement
8/7/2013
5173267
162734118.xls.ms_office1
This parameter specifies the intrafrequency measurement quantity. It defines the reference measurement quantity for the UE to report event 1x. For events 1A, 1B, 1C, and 1D which adopt relative thresholds, the measurement Enumeratio quantity does not n Type have great impact on the threshold values. For event 1F which adopts absolute threshold, the measurement quantity should be set based on the reality of the cell. If the cell is located in the center of the coverage area, the main factor that When it is checked, system supports intrafrequency neighboring detect function. DETSET_RPRT_ SWITCH switch in HoSwitch in SET CORRMALGOS Enumeratio WITCH can also n Type start the intrafrequency neighboring detect function. Either switch is checked, the RNC starts the intrafrequency neighboring detect function.
OFF, ON
OFF,ON
8/7/2013
5183267
162734118.xls.ms_office1
Relative threshold of the event 1A. The greater the value of this parameter is, the more easily the event 1A is triggered. This parameter specifies the CS non-VP service relative threshold of event 1A. The higher the threshold is, the more easily the event 1A is triggered. The lower the threshold is, the harder the event 1A is triggered. For the definition of event 1A, refer to 3GPP TS 25.331. The relative threshold can directly affect the ratio of the UE involved in soft handover (SHO ratio). So the threshold should be wisely chosen to achieve smooth SHOs. The value of this parameter determines the
Interval Type
0~29
Interval Type
0~29
0~14.5,Step :0.5
8/7/2013
5193267
162734118.xls.ms_office1
This parameter specifies the VP service relative threshold of event 1A. The higher the threshold is, the more easily the event 1A is triggered. The lower the threshold is, the harder the event 1A is triggered. ADD For the definition CELLINTRAF of event 1A, refer VP service 1A REQHO(Option to 3GPP TS Interval IntraRelThdF event relative al) 25.331. Type or1ACSVP THD SET The relative INTRAFREQH threshold can O(Optional) directly affect the ratio of the UE involved in soft handover (SHO ratio). So the threshold should be wisely chosen to achieve smooth SHOs. The value of this parameter determines the SHO area and
0~29
0~14.5,Step :0.5
8/7/2013
5203267
162734118.xls.ms_office1
This parameter specifies the PS service relative threshold of event 1A. The higher the threshold is, the more easily the event 1A is triggered. The lower the threshold is, the harder the event 1A is triggered. For the definition of event 1A, refer to 3GPP TS 25.331. The relative threshold can directly affect the ratio of the UE involved in soft handover (SHO ratio). So the threshold should be wisely chosen to achieve smooth SHOs. The value of this parameter determines the SHO area and Relative threshold of the event 1B. The lower the value of this parameter is, the more easily the event 1B is triggered.
ADD CELLINTRAF PS service 1A REQHO(Option IntraRelThdF event relative al) or1APS threshold SET INTRAFREQH O(Optional)
Interval Type
0~29
0~14.5,Step :0.5
Interval Type
0~29
8/7/2013
5213267
162734118.xls.ms_office1
This parameter specifies the CS non-VP service relative threshold of event 1B. The lower the threshold is, the more easily the event 1B is triggered. The higher the threshold is, the harder the event ADD 1B is triggered. CELLINTRAF For the definition REQHO(Option of event 1B, refer Interval al) to 3GPP TS Type SET 25.331. INTRAFREQH The relative O(Optional) threshold can directly affect the ratio of the UE involved in soft handover (SHO ratio). So the threshold should be wisely chosen to achieve smooth SHOs. The value of this parameter determines the
0~29
0~14.5,Step :0.5
8/7/2013
5223267
162734118.xls.ms_office1
This parameter specifies the PS service relative threshold of event 1B. The lower the threshold is, the more easily the event 1B is triggered. The higher the threshold is, the harder the event 1B is triggered. ADD For the definition CELLINTRAF of event 1B, refer VP service 1B REQHO(Option to 3GPP TS Interval IntraRelThdF event relative al) 25.331. Type or1BCSVP THD SET The relative INTRAFREQH threshold can O(Optional) directly affect the ratio of the UE involved in soft handover (SHO ratio). So the threshold should be wisely chosen to achieve smooth SHOs. The value of this parameter determines the SHO area and
0~29
0~14.5,Step :0.5
8/7/2013
5233267
162734118.xls.ms_office1
This parameter specifies the PS service relative threshold of event 1B. The lower the threshold is, the more easily the event 1B is triggered. The higher the threshold is, the harder the event 1B is triggered. ADD For the definition CELLINTRAF of event 1B, refer PS service 1B REQHO(Option to 3GPP TS Interval IntraRelThdF event relative al) 25.331. Type or1BPS threshold SET The relative INTRAFREQH threshold can O(Optional) directly affect the ratio of the UE involved in soft handover (SHO ratio). So the threshold should be wisely chosen to achieve smooth SHOs. The value of this parameter determines the SHO area and
0~29
0~14.5,Step :0.5
IntrTmr
TinTR
CN flow control timer (long). If the OVERLOAD SET message is not Interval IUTIMERAND received in this Type NUM(Optional) period, the traffic volume will be increased by a degree.
8/7/2013
5243267
162734118.xls.ms_office1
IPADDR
IP address
This parameter LOP specifies the local IP Address VCL(Mandator IP address of an Type y) IPoA PVC.
0.0.0.0~255 .255.255.25 5
IPADDR
Local IP address
ADD ETHIP(Mandat ory) ADD DEVIP(Mandat ory) ADD IPOAPVC(Man datory) ACT VCLCC(Manda tory) ADD ETHTRKIP(Ma ndatory)
This parameter specifies the local IP Address IP address of the Type Ethernet port.
0.0.0.0~255 .255.255.25 5
IPADDR
ADD This parameter IP Address VLANID(Mand specifies the next Type atory) hop IP address.
0.0.0.0~255 .255.255.25 5
8/7/2013
5253267
162734118.xls.ms_office1
IPADDR
Local IP address
Local IP address. It must be addresses ADD configured on IP Address IPPATH(Manda RNC (including Type tory) interface board's device IP and port IP) .
0.0.0.0~255 .255.255.25 5
IPHC
Head compress
It specifies whether to enable ADD No_HC, the IP header PPPLNK(Optio Enumeratio UDP/IP_H compression nal) n Type C function on the PPP link.
8/7/2013
5263267
162734118.xls.ms_office1
IPHC
Head compress
This parameter specifies whether ADD No_HC, to enable the IP MPGRP(Option Enumeratio UDP/IP_H head compression al) n Type C function of a PPP link.
IPINDEX
IP address index
This parameter specifies the index of the secondary IP address for the Ethernet port.
Interval Type
1~5
1 to 5
8/7/2013
5273267
162734118.xls.ms_office1
This parameter Whether ADD specifies whether IPLOGPORT Binding logical NODEBIP(Man Enumeratio NO, YES to bind the logical FLAG port or not datory) n Type port.
8/7/2013
5283267
162734118.xls.ms_office1
IPLPN
This parameter ADD specifies the Logic port No. NODEBIP(Man logical port datory) number the NodeB IP stack.
Interval Type
0~119
0 to 119
IPSN
This parameter ADD specifies the Interval NODEBIP(Man number of the slot Type datory) bearing NodeB IP transport.
14~27
14 to 27
8/7/2013
5293267
162734118.xls.ms_office1
IPSRN
This parameter specifies the ADD number of the NODEBIP(Man subrack bearing datory) NodeB IP transport.
Interval Type
0~5
0 to 5
Indicating ADD whether the Iub IP Trans Apart IPTRANSAP NODEB(Manda interface supports Enumeratio Ind ARTIND tory) IP hybrid n Type transport.
8/7/2013
5303267
162734118.xls.ms_office1
IPTYPE
IP address type
This parameter specifies whether an IP address is a Enumeratio PRIMARY, PRIMARY, primary or n Type SECOND SECOND secondary IP address.
Indicating whether the UE allocated with Access Class 0 can be allowed to initiate access to the radio network. ADD The UE judges Access class 0 BARRED, BARRED, CELLACCESS whether it IsAccessClass barred Enumeratio NOT_BAR NOT_BAR STRICT(Option belongs to this 0Barred indicator n Type RED RED al) access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331.
8/7/2013
5313267
162734118.xls.ms_office1
Indicating whether the UE allocated with Access Class 10 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 11 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 12 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331.
8/7/2013
5323267
162734118.xls.ms_office1
Indicating whether the UE allocated with Access Class 13 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 14 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 15 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331.
8/7/2013
5333267
162734118.xls.ms_office1
Indicating whether the UE allocated with Access Class 1 can be allowed to initate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 2 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 3 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331.
ADD Access class 1 CELLACCESS IsAccessClass barred STRICT(Option 1Barred indicator al)
ADD Access class 2 CELLACCESS IsAccessClass barred STRICT(Option 2Barred indicator al)
ADD Access class 3 CELLACCESS IsAccessClass barred STRICT(Option 3Barred indicator al)
8/7/2013
5343267
162734118.xls.ms_office1
Indicating whether the UE allocated with Access Class 4 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 5 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 6 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331.
ADD Access class 4 CELLACCESS IsAccessClass barred STRICT(Option 4Barred indicator al)
ADD Access class 5 CELLACCESS IsAccessClass barred STRICT(Option 5Barred indicator al)
ADD Access class 6 CELLACCESS IsAccessClass barred STRICT(Option 6Barred indicator al)
8/7/2013
5353267
162734118.xls.ms_office1
Indicating whether the UE allocated with Access Class 7 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 8 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Indicating whether the UE allocated with Access Class 9 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331.
ADD Access class 7 CELLACCESS IsAccessClass barred STRICT(Option 7Barred indicator al)
ADD Access class 8 CELLACCESS IsAccessClass barred STRICT(Option 8Barred indicator al)
ADD Access class 9 CELLACCESS IsAccessClass barred STRICT(Option 9Barred indicator al)
8/7/2013
5363267
162734118.xls.ms_office1
This parameter specifies whether ACT the EtherOAM ETHOAMAH( frame carries the Enumeratio NO, YES Optional) flag indicating the n Type active or standby role of a port. ADD Is first class RSCGRP(Mand transport resource Enumeratio NO, YES atory) group. n Type This parameter specifies whether the MAC-hs window size is fixed. - If this parameter ADD is set to TRUE, NODEBLMTP the MAC-hs ARA(Optional) window size is fixed. - If this parameter is set to FALSE, the MAC-hs window size is flexible. This parameter specifies the flag of the primary operator. "YES" indicates that the ACT license of the LICENSE(Opti primary operator onal) is to be activated, "NO" indicates that the license of the secondary operator is to be activated.
NO,YES
NO, YES
FALSE, TRUE
NO,YES
This parameter NO(NOT ACT specifies whether QOSPATH) ISQOSPATH IS QOSPATH IPPM(Mandator Enumeratio NO,YES to select a QoS , YES(IS y) n Type path. QOSPATH)
8/7/2013
5373267
162734118.xls.ms_office1
To determine whether the node ADD is root node when ADJNODE(Ma Enumeratio NO, YES Transport Type is ndatory) n Type ATM or ATM_IP.
NO, YES
ITFT
ADD TRMMAP(Man datory) ADD Interface Type ADJMAP(Man Interface type. datory) ADD IPPATH(Manda tory)
8/7/2013
5383267
162734118.xls.ms_office1
When the Iu interface is faulty, the RNC gradually restricts cell access in Bar mode. When the Iu interface is restored, the RNC gradually enables cell access in Not Bar mode. This AC SET parameter defines Restriction Interval ACALGO(Opti the interval Interval of Cell Type onal) between the cell By IU working in Bar mode and in Not Bar mode. In this way, the location update procedure can be distributed to a specified time period and the risk due to congestion is reduced.
IuAcInterval OfCell
1~3600
1~3600
DL OLC ADD Number of RABs Interval IubDlOlcRel released RAB NODEBOLC(O selected in one Type RabNum number ptional) DL traffic release.
0~10
0~10
UL OLC ADD Number of RABs Interval IubUlOlcRel released RAB NODEBOLC(O selected in one Type RabNum number ptional) UL traffic release.
0~10
0~10
Iu CS Release SET A timer to Iu CS Interval IuCSRelNoR protection STATETIMER( Release Type ABTmr timer Optional) protection.
1~65535
1~65535
Iu PS Release SET A timer to Iu PS Interval IuPSRelNoR protection STATETIMER( Release Type ABTmr timer Optional) protection.
1~65535
1~65535
8/7/2013
5393267
162734118.xls.ms_office1
Indicating whether to Congestion ADD support Control IurCongCtrlS NRNC(Optional congestion Indicator over uppInd ) control over Iur IUR for NRNC interface of the neighboring
OFF, ON
IurExistInd
Indicating IUR Interface ADD whether to config TRUE, Existing NRNC(Mandat neighbouring Enumeratio FALSE Indication ory) RNC's DSP n Type index.
TRUE, FALSE
Indicating whether to Hsdpa cap ind ADD support Hsdpa IurHsdpaSup over IUR for NRNC(Optional over Iur interface pInd NRNC ) of the neighboring RNC. Indicating whether to Hsupa cap ind ADD support Hsupa IurHsupaSup over IUR for NRNC(Optional over Iur interface pInd NRNC ) of the neighboring RNC. Iu signaling RST connection IU signalling IUSIGCONN IURESOURCE( identifier Id ID Mandatory) allocated by RNC for the user.
OFF, ON
OFF, ON
Interval Type
0~1677721 0~1677721 5 5
8/7/2013
5403267
162734118.xls.ms_office1
How the RNC state is affected by the Iu interface service state. If the value is NONE, the RNC state is independent of the Iu interface state(faulty or recovery). If the value is IUCS, the RNC state is considered to be ADD Iu State Policy faulty when Iu CS IuStatePolicy RNCPOOL(Opt For RncPool interface is faulty. ForPool ional) If the value is IUPS, the RNC state is considered to be faulty when Iu PS interface is faulty. If the value is IUCS_IUPS, the RNC state is considered to be faulty when IU CS and IU PS interface are faulty. When IU CS or IU PS This parameter specifies the expected RX type of J0. The setting J0 expected SET of the expected J0RXT incept type OPT(Optional) RX byte must be consistent with that of the TX byte at the peer end.
8/7/2013
5413267
162734118.xls.ms_office1
This parameter specifies the expected RX value of J0. The setting of the SET expected RX byte String Type OPT(Optional) must be consistent with that of the TX byte at the peer end.
None
J0TXT
J0 transmit type
This parameter specifies the TX type of J0. The NULL, setting of the TX SET 1byte, byte must be Enumeratio OPT(Optional) 16byte, consistent with n Type 64byte that of the expected RX byte at the peer end.
This parameter specifies the TX value of J0. The setting of the TX SET byte must be String Type OPT(Optional) consistent with that of the expected RX byte at the peer end.
None
J1RXT
This parameter specifies the expected RX type NULL, of J1. The setting SET 1byte, of the expected Enumeratio OPT(Optional) RX byte must be 16byte, n Type 64byte consistent with that of the TX byte at the peer end.
8/7/2013
5423267
162734118.xls.ms_office1
This parameter specifies the expected RX value of J1. The setting of the SET expected RX byte String Type OPT(Optional) must be consistent with that of the TX byte at the peer end.
None
J1TXT
J1 transmit type
This parameter specifies the TX type of J1. The NULL, setting of the TX SET 1byte, byte must be Enumeratio OPT(Optional) 16byte, consistent with n Type 64byte that of the expected RX byte at the peer end.
This parameter specifies the TX value of J1. The setting of the TX SET byte must be String Type OPT(Optional) consistent with that of the expected RX byte at the peer end.
None
8/7/2013
5433267
162734118.xls.ms_office1
J2RXT
This parameter specifies the expected J2 RX type. The setting SET NULL, J2 hope incept of the expected COPTLNK(Opt Enumeratio 16byte, type RX byte must be ional) n Type 64byte consistent with that of the TX byte at the peer end.
This parameter SET J2 hope incept specifies the COPTLNK(Opt J2RXVALUE value expected J2 RX ional) value.
String Type -
1~62 characters
J2TXT
J2 transmit type
This parameter specifies the J2 TX type. The SET setting of the TX NULL, COPTLNK(Opt byte must be Enumeratio 16byte, ional) consistent with n Type 64byte that of the expected RX byte at the peer end.
8/7/2013
5443267
162734118.xls.ms_office1
String Type -
1~62 characters
K2MODE
K2 Mode
This parameter NOTNOTspecifies whether INDICATE- INDICATEthe K2 byte has SET Enumeratio END, END, the MSP(Optional) INDICATE- INDICATEbidirectional/unid n Type END END irectional end or not.
KEEPTMR
Timer of waiting ADD Timer_Keepfor STAT Interval SAALLNK(Opt Alive response from the Type ional) peer end.
KEYCHK
This parameter specifies whether the check is a key detect. If the check is a key detect, the check STR Key detect or result may affect IPCHK(Mandat Enumeratio NO, YES not the fault handling ory) n Type of the port. Otherwise, the check result does not affect the fault handling of the port.
YES,NO
The period of SET KPI alarm Period of KPI KpiAlarmChk KPIALMTHD( check,it's the Alarm Check Times Optional) times of KPI report period.
D1, D2, D1,D2,D3, D3, D4, D5, Enumeratio D4,D5,D6, D6, D7, D8, n Type D7,D8,D9, D9, D10 D10
8/7/2013
5453267
162734118.xls.ms_office1
SET RNC peport KPI KPIALMTHD( Enumeratio OFF, ON alarm switch. Optional) n Type
OFF, ON
LAC
ADD LAC(Mandator y) ADD RAC(Mandator y) ADD CELLSETUP( Mandatory) ADD QUICKCELLS ETUP(Mandato ry) Location area ADD code SAC(Mandatory ) ADD NRNCCELL(M andatory) ADD GSMCELL(Ma ndatory) ADD CZ(Mandatory) ADD LASNAMAP( Mandatory)
Identifying a location area code for a PLMN. It is defined by the operator. For Interval detailed Type information of this parameter, refer to 3GPP TS 23.003.
LATITUDE
This parameter specifies the antenna latitude of the GPS ADD reference Interval GPS(Mandatory receiver. The Type ) latitude is expressed in the form of degree:minute:sec ond.
8/7/2013
5463267
162734118.xls.ms_office1
This parameter specifies the antenna latitude of the GPS ADD reference GPS(Mandatory receiver. The String Type ) latitude is expressed in the form of degree:minute:sec ond.
LATPRD
This parameter ADD Delay measure specifies the Interval IPLOGICPORT period period of Type (Optional) measuring delay.
1~100
100~10000 step:100
This parameter specifies the ADD Delay adjust number of periods Interval LATSUSTM IPLOGICPORT suspend period that delay Type (Optional) adjustment suspends.
0~100
0~100
LATTH
This parameter ADD specifies the IPLOGICPORT threshold of rate (Optional) down delay.
Interval Type
0~10000
0~10000
8/7/2013
5473267
162734118.xls.ms_office1
LATUDK
This parameter average delay ADD specifies the filter Interval down filter IPLOGICPORT mantissa of Type mantissa (Optional) average delay decrease.
0~15
0~15
LATUPK
This parameter average delay ADD specifies the filter Interval up filter IPLOGICPORT mantissa of Type mantissa (Optional) average delay increase.
0~15
0~15
LCARRYT
This parameter specifies the type ADD UNI, IMA, UNI, IMA, of link that carries VPCLCX(Mand Enumeratio FRAATM, FRAATM, the low-end atory) n Type NCOPT NCOPT VPL/VCL cross connection. SET LDM(Optional) SET SATLDM(Opti onal) Length of smoothing filter Interval window of intraType frequency load balancing (LDB).
1~32
1~32
8/7/2013
5483267
162734118.xls.ms_office1
This parameter specifies which choice the load balancing DRD algorithm will be applied. - Power: Power(Downlink none-HSDPA power is used for services carried on DCH, and downlink HSDPA guarantee power SET is used for DRD(Optional) Power, Load balance services carried LdbDRDchoi ADD Enumeratio UserNumbe UserNumbe DRD choice on HSce CELLDRD(Opt n Type r, Power r DSCH)will be ional) applied to the load balancing DRD algorithm. - UserNumber: User number(Downlink R99 equivalent user number is used for services carried on DCH, and downlink HSDPA user number is used for services
8/7/2013
5493267
162734118.xls.ms_office1
Dl load balance DRD LdbDRDLoad power remain RemainThdD threshold for CH DCH
This parameter specifies the downlink load threshold to trigger load balancing DRD for services carried on DCH. SET The load DRD(Optional) balancing DRD ADD will probably be CELLDRD(Opt triggered only ional) when the downlink cell remanent non H power or remanent R99 equivalent user number is less than this threshold.
Interval Type
0~100
0~100
8/7/2013
5503267
162734118.xls.ms_office1
Dl load balance DRD LdbDRDLoad power remain RemainThdH threshold for SDPA HSDPA
This parameter specifies the downlink load threshold to trigger load balancing DRD for services carried on HSSET DSCH. The load DRD(Optional) balancing DRD Interval ADD will probably be Type CELLDRD(Opt triggered only ional) when the downlink cell remanent HSDPA guarantee power or remanent HSDPA user number is less than this threshold.
0~100
0~100
8/7/2013
5513267
162734118.xls.ms_office1
This parameter specifies the threshold of remanent load offset between the current cell and the target cell when load balancing DRD is applied for DCH users. Only when the remanent load offset reaches this threshold can a neighboring cell Load balance SET be selected as a Interval LdbDRDOffs DRD offset for DRD(Optional) candidate DRD Type etDCH DCH cell for DCH users.(If Load balance DRD choice is Power, additional condition should also be statisfied, that is total power remain difference between the current cell and target cell should be less than Load Balance DRD Total Power
0~100
0~100
8/7/2013
5523267
162734118.xls.ms_office1
This parameter specifies the threshold of remanent load offset between the current cell and the target cell when load balancing DRD is applied for HSDPA users. Only when the remanent load offset reaches this threshold can a Load balance SET neighboring cell Interval LdbDRDOffs DRD offset for DRD(Optional) be selected as a Type etHSDPA HSDPA candidate DRD cell for HSDPA users.(If Load balance DRD choice is Power, additional condition should also be statisfied, that is total power remain difference between the current cell and target cell should be less than Load Balance DRD
0~100
0~100
8/7/2013
5533267
162734118.xls.ms_office1
This parameter specifies whether the load balancing DRD algorithm will be applied for services carried on DCH. - ON: The load balancing DRD SET algorithm will be Load balance DRD(Optional) applied.(If cellLdbDRDSwit DRD switch ADD level DRD Enumeratio ON, OFF chDCH for DCH CELLDRD(Opt parameters are n Type ional) configured, the status of cell level Load balance DRD switch for DCH should also be considered.) - OFF: The load balancing DRD algorithm will not be applied.
ON, OFF
8/7/2013
5543267
162734118.xls.ms_office1
This parameter specifies whether the load balancing DRD algorithm will be applied for services carried on HS-DSCH. - ON: The load balancing DRD algorithm will be SET applied.(If cellLoad balance DRD(Optional) level DRD LdbDRDSwit DRD switch ADD Enumeratio ON, OFF parameters are chHSDPA for HSDPA CELLDRD(Opt n Type configured, the ional) status of cell level Load balance DRD switch for HSDPA should also be considered.) - OFF: The load balancing DRD algorithm will not be applied.
ON, OFF
This parameter specifies the threshold of the downlink remanent total power difference between the current cell and the target cell when load balancing DRD is Load balance applied and the DRD total SET Interval LdbDRDTota load balancing power protect DRD(Optional) Type lPwrProThd DRD choice is threshold Power. Only when the downlink remanent total power difference is less than this threshold can a neighboring cell be selected as a candidate DRD cell.
0~100
0~100
8/7/2013
5553267
162734118.xls.ms_office1
Value range: NODEB_CREDI T_LDR_SWITC H (NodeB Credit LDR Switch), LCG_CREDIT_L DR_SWITCH (Local Cell Group Credit LDR Switch), LC_CREDIT_LD R_SWITCH (Local Cell Credit LDR Switch) Content: The SET values above LDCALGOPA represent the RA(Optional) following algorithms: NODEB_CREDI T_LDR_SWITC H: NodeB credit congestion control algorithm. This is an RNCoriented algorithm. When NodeB creadit load is heavy, the load can be reshuffled through BE FALSE means not considering the code priority during the code reshuffling. TRUE means considering the code priority during the code reshuffling. If the ADD parameter is CELLLDR(Opti TRUE, the codes onal) with high priority are reserved during the code reshuffling. It is good for the code resource dynamic sharing, which is a function used for the HSDPA service.
LdcSwitch
NODEB_C REDIT_LD R_SWITCH (NodeB Credit LDR Switch), LCG_CRE DIT_LDR_ SWITCH(L ocal Cell Group Credit LDR Switch), LC_CREDI T_LDR_S WITCH(Lo cal Cell Credit LDR Switch)
8/7/2013
5563267
162734118.xls.ms_office1
Code resource usage difference threshold. Interfrequency handover is triggered when the difference of the resource usage of the current cell and that of the target cell is greater than this threshold. The smaller this InterFreq HO ADD parameter value, Interval LdrCodeUsed code used ratio CELLLDR(Opti the easier it is to Type SpaceThd space threshold onal) find the qualified target cell for blind handover. Excessively small values of the parameter, however makes the target cell easily enters the congestion status. The higher the parameter value, the more difficult it is for the interfrequency blind
0~100
0~1, step:0.01
8/7/2013
5573267
162734118.xls.ms_office1
If congestion is triggered by multiple resources such as credit and code at the same time, the congestion of resources specified in this parameter is IUBLDR(Iu processed with b load the first priority. reshuffling), IUBLDR refers to CODELDR processing of (Code load SET IUBLDR,C LDR action reshuffling), LDCALGOPA Enumeratio ODELDR,U trigged by Iub UULDR(Uu RA(Optional) n Type ULDR,CRE bandwidth. load DITLDR CREDITLDR reshuffling), refers to CREDITLD processing of R(Credit LDR action load trigged by credit. reshuffling) CODELDR refers to processing of LDR action trigged by code. UULDR refers to processing of LDR action trigged by Uu.
LdrFirstPri
8/7/2013
5583267
162734118.xls.ms_office1
If congestion is triggered by multiple resources such as credit and code at the same time, the congestion of resources specified in this parameter is IUBLDR(Iu processed with b load the fourth reshuffling), priority. CODELDR IUBLDR refers to (Code load fourth priority SET IUBLDR,C processing of reshuffling), LdrFourthPri for load LDCALGOPA LDR action Enumeratio ODELDR,U UULDR(Uu reshuffling RA(Optional) trigged by Iub n Type ULDR,CRE load DITLDR bandwidth. reshuffling), CREDITLDR CREDITLD refers to R(Credit processing of load LDR action reshuffling) trigged by credit. CODELDR refers to processing of LDR action trigged by code. UULDR refers to processing of LDR action trigged by Uu.
8/7/2013
5593267
162734118.xls.ms_office1
Identifying the period of the LDR execution. When basic congestion occurs, execution of LDR can dynamically reduce the cell load. The lower the parameter value is, the more frequently the SET LDR action is LDCPERIOD( executed, which Optional) decreases the load Interval SET quickly. If the Type SATLDCPERI parameter value is OD(Optional) excessively low, an LDR action may overlap the previous one before the previous result is displayed in LDM. The higher the parameter value is, the more likely this problem can be prevented. If the parameter value is
1~86400
1~86400
8/7/2013
5603267
162734118.xls.ms_office1
If congestion is triggered by multiple resources such as credit and code at the same time, the congestion of resources specified in this parameter is IUBLDR(Iu processed with b load the second reshuffling), priority. CODELDR IUBLDR refers to (Code load second priority SET IUBLDR,C processing of reshuffling), for load LDCALGOPA LDR action Enumeratio ODELDR,U LdrSecondPri UULDR(Uu reshuffling RA(Optional) trigged by Iub n Type ULDR,CRE load DITLDR bandwidth. reshuffling), CREDITLDR CREDITLD refers to R(Credit processing of load LDR action reshuffling) trigged by credit. CODELDR refers to processing of LDR action trigged by code. UULDR refers to processing of LDR action trigged by Uu.
8/7/2013
5613267
162734118.xls.ms_office1
If congestion is triggered by multiple resources such as credit and code at the same time, the congestion of resources specified in this parameter is IUBLDR(Iu processed with b load the third priority. reshuffling), IUBLDR refers to CODELDR processing of (Code load SET IUBLDR,C LDR action reshuffling), LDCALGOPA Enumeratio ODELDR,U trigged by Iub UULDR(Uu RA(Optional) n Type ULDR,CRE bandwidth. load DITLDR CREDITLDR reshuffling), refers to CREDITLD processing of R(Credit LDR action load trigged by credit. reshuffling) CODELDR refers to processing of LDR action trigged by code. UULDR refers to processing of LDR action trigged by Uu.
LdrThirdPri
LEI
Path Load EQ ADD Path Load EQ Threshold LOADEQ(Man threshold Table Table Index datory) Index.
Interval Type
1~63
1~63
8/7/2013
5623267
162734118.xls.ms_office1
LEIBRZ
Index of the load ADD EQ used by the Bronze user Interval ADJMAP(Man current adjacent Load EQ index Type datory) node's bronze user.
0~63
0~63
LEIGLD
Index of the load ADD Gold user EQ used by the Interval ADJMAP(Man Load EQ index current adjacent Type datory) node's gold user.
0~63
0~63
LEISLV
Index of the load ADD Silver user EQ used by the Interval ADJMAP(Man Load EQ index current adjacent Type datory) node's silver user.
0~63
0~63
LENO
M3UA local entity indexes and M3UA local Interval entity have a one- Type to-one correspondence.
0~118
0~118
8/7/2013
5633267
162734118.xls.ms_office1
LEVEL
This parameter SET specifies the ALMML(Mand status of the atory) alarm mask switch.
ON,OFF
This parameter ADD specifies the LEVEL MD Level ETHMD(Option priority level of al) an MD. This parameter specifies the number of the Fractional link corresponding to the low-end port. For the AEUa, the number ranges from 0 to 31. For Low ADD the AOUa in E1 LFRAATML FRAATM link VPCLCX(Optio transmission NKN No. nal) mode, the number ranges from 0 to 125. For the AOUa in T1 transmission mode, the number ranges from 0 to 167. The bearing Fractional link is configured.
Interval Type
0~7
0 to 7
Interval Type
0~31
0 to 31
8/7/2013
5643267
162734118.xls.ms_office1
This parameter LOD Logic function specifies the LGCAPPTYP PATCH(Option type logical function E al) type.
This parameter specifies the logical function type. UCP:UMTS RNC Control UCP, plane Process Logic function ADD RUCP, UCP,RUCP LGCAPPTYP RUCP:Resource Enumeratio type BRD(Optional) UUP, ATM, ,UUP,ATM, E Management and n Type IP IP UMTS RNC Control plane Process UUP:UMTS RNC User plane Process. SET This parameter Logic function LGCAPPTYP OPT(Mandatory specifies the logic Enumeratio ATM, IP type E ) function type. n Type ATM,IP
8/7/2013
5653267
162734118.xls.ms_office1
This parameter specifies the number of the IMA group corresponding to the low-end port. ADD For the AEUa, the VPCLCX(Optio number ranges nal) from 0 to 31. For the AOUa, the number ranges from 0 to 83. The bearing IMA group is configured. DL SF threshold to limit CM. When DL SF limit CM indicator is TRUE, if the downlink spreading factor is less than or equal to this parameter value, SET the active set CMCF(Mandat quality ory) measurement is not allowed and CM function should be deactivated.When DL SF limit CM ind is TRUE, if CM is activated, the downlink spreading factor should be greater than this
LIMAGRPN
Interval Type
0~83
0 to 83
D8, D16, Enumeratio D32, D64, 8,16,32,64,1 n Type D128, D256 28,256
8/7/2013
5663267
162734118.xls.ms_office1
When the BE service rate of the UE decreases to the DCCC threshold rate, the UE, however, cannot be changed to the FACH state because, for example, the state transition switch is OFF or there are CS services. D0, D8, In this case, when 0, 8, 16, 32, SET D16, D32, traffic remains 64, 128, DCCC(Optional Enumeratio D64, D128, low for quite a 144, 256, ) n Type D144, long period, the 384 D256, D384 service rate decreases to this rate and D2F state transition is not performed. The time parameters and traffic volume measurement parameters for the function of low activity rate adjustment are the same as those in This parameter SET specifies the ALMPORT(Opt String Type 0~9Charact lower limit of the ional) ers alarm.
LL
Lower Limit
8/7/2013
5673267
162734118.xls.ms_office1
LNKCODE
Line code
This parameter specifies the coding scheme of the line. 1. HDB3 and AMI are B8ZS(B8ZS applicable to E1 ), links, and B8ZS SET HDB3(HD and AMI_ZCS Enumeratio E1T1(Optional) B3), are applicable to n Type AMI(AMI), T1 links. AMI_ZCS( 2. The setting of AMI_ZCS) this parameter should be consistent with that at the peer end.
8/7/2013
5683267
162734118.xls.ms_office1
LNKN
Link No.
SET E1T1LOP(Opti onal) LOP E1T1(Optional) STR E1T1TST(Optio nal) SET E1T1(Optional) SET COPTLNK(Ma ndatory)
This parameter specifies the number of an E1/T1 link. This parameter specifies the number of a link. For the AEUa or PEUa, the value ranges from 0 to Interval 31. For the AOUa Type in E1 mode, the value ranges from 0 to 125; for the AOUa in T1 mode, the value ranges from 0 to 167. For the POUa, the value ranges from 0 to 167.
0~167
0 to 167
Initial bearing ADD Link work LNKREDFL traffic active M3LNK(Option mode,Reference AG tag al) to RFC4666.
M3UA_MA STER_MO D, M3UA_SL AVE_MOD (For definitions of the two modes, refer to RFC4666.)
8/7/2013
5693267
162734118.xls.ms_office1
Used for MTP3 link load sharing. Suppose that the number of 1s in the value is expressed as n. Then the the B0000, maximum number B0001, of the MTP3 links B0010, for load sharing is B0011, 2^n. For example, B0100, ADD B0000 indicates B0101, MTP3LKS(Opti that only one B0110, Signalling link onal) MTP3 link can be B0111, LNKSLSMA Enumeratio mask ADD used for load B1000, SK n Type M3LKS(Option sharing. B0001 B1001, al) and B1000 B1010, indicate that at B1011, most two MTP3 B1100, links can be used B1101, for load sharing B1110, while the others B1111 cannot. This mask AND the value of Signalling Route Mask specified by ADD N7DPC must be zero.
B0000, B0001, B0010, B0011, B0100, B0101, B0110, B0111, B1000, B1001, B1010, B1011, B1100, B1101, B1110, B1111
8/7/2013
5703267
162734118.xls.ms_office1
LNKT
Frame Structure
E1_DOUB LE_FRAM E(E1_DOU BLE_FRA ME), E1_CRC4_ This parameter MULTI_FR specifies the AME(E1_C frame structure. RC4_MUL SET The setting of this TI_FRAME Enumeratio E1T1(Optional) parameter should ), n Type be consistent with T1_SUPER that at the peer _FRAME(T end. 1_SUPER_ FRAME), T1_EXTEN DED_SUPE R_FRAME( T1_EXTEN DED_SUPE R_FRAME)
E1_DOUB LE_FRAM E, E1_CRC4_ MULTI_FR AME, T1_SUPER _FRAME, T1_EXTEN DED_SUPE R_FRAME
LNKT
Link type
ACT VCLCC(Manda This parameter SAALLNK, tory) specifies the type Enumeratio AAL2PAT LOP of a VCL. n Type H, VCL(Mandator IPOAPVC y)
LOCALIP
Local IP address
ADD This parameter IP Address PPPLNK(Mand specifies the local Type atory) IP address.
0.0.0.0~255 .255.255.25 5
8/7/2013
5713267
162734118.xls.ms_office1
LOCALIP
Local IP address
This parameter ADD specifies the local IP Address MPGRP(Manda IP address for the Type tory) MLPPP group.
0.0.0.0~255 .255.255.25 5
LOCALIP
Local IP
LoCell
Local cell ID
This parameter STR specifies the IP Address IPLOPTST(Ma source IP address Type ndatory) of the IP loopback test. ADD LOCELL(Mand Uniquely atory) identifying a local ADD cell. For detailed Interval CELLSETUP( information of 0~2684354 Type Mandatory) this parameter, 55 ADD refer to 3GPP TS QUICKCELLS 25.401. ETUP(Mandato ry)
0.0.0.0~255 .255.255.25 5
0~2684354 55
LOCIP1
IP Address Type
0.0.0.0~255 .255.255.25 5
8/7/2013
5723267
162734118.xls.ms_office1
LOCIP2
IP Address Type
0.0.0.0~255 .255.255.25 5
LOCPN
ADD Local port of the Interval SCTPLNK(Man SCTP link. Type datory)
1024~6553 1024~6553 5 5
LODCTRL
LFB(Load This parameters from BAM SET specifies the load and write LODCTRL(Ma Enumeratio LFB,CL key when the flash), ndatory) n Type board is started. CL(Consult Load)
This field ADD indicate whether SCTPLNK(Man the SCTP link is Enumeratio NO, YES datory) bound with logic n Type port.
NO, YES
8/7/2013
5733267
162734118.xls.ms_office1
LOGPORTN O
ADD No. of the logic Interval Logic Port No. SCTPLNK(Man port of the SCTP Type datory) Link.
0~119
0~119
ADD Slot No. of the SCTPLNK(Man logic port of the datory) SCTP link.
Interval Type
14~27
14~27
This parameter specifies the antenna longitude of the GPS ADD reference Interval GPS(Mandatory receiver. The Type ) longitude is expressed in the form of degree:minute:sec ond. This parameter specifies the antenna longitude of the GPS ADD reference GPS(Mandatory receiver. The String Type ) latitude is expressed in the form of degree:minute:sec ond.
8/7/2013
5743267
162734118.xls.ms_office1
LOPT
Loop type
SET E1T1LOP(Man This parameter datory) specifies the SET loopback type. OPTLOP(Mand atory)
NO_LOOP( No loop), REMOTE_ Enumeratio LOOP(Rem n Type ote loop), LOCAL_L OOP(Local loop)
LOSTSUST M
This parameter specifies the ADD Lost adjust number of periods Interval IPLOGICPORT suspend period that packet loss Type (Optional) rate adjustment suspends.
0~100
0~100
8/7/2013
5753267
162734118.xls.ms_office1
LPN
This parameter specifies the ADD Low NCOPT number of the Interval VPCLCX(Optio port No. optical port Type nal) corresponding to the low-end port.
0~3
0 to 3
LPN
Interval Type
0~119
0~119
LPN
This parameter ADD specifies the ATMLOGICPO number of a RT(Optional) logical port.
Interval Type
0~447
AEUa (0~191) 0~127 is Leaf logical port,128~19 1 is Hub logical port. AOUa (0~383) 0~255 is Leaf logical port,256~38 3 is Hub logical port. UOIa (0~447) 0~383 is Leaf logical port,384~44 7 is Hub logical port.
8/7/2013
5763267
162734118.xls.ms_office1
LPNSN
ADD Slot No. of the IP IP Logic Port Interval IPPATH(Manda logic port of the Slot No. Type tory) IP Path.
14~27
14~27
LPNTYPE
This parameter specifies the type of the logical ADD port. Only the ATMLOGICPO logical port on the Enumeratio Hub, Leaf RT(Mandatory) leaf node can n Type carry the SAAL link, AAL2 path, and IPoA PVC.
Hub, Leaf
LS
Link select
This parameter specifies whether ALL(Select to select all the all links), SET ALL, E1/T1 links Enumeratio SINGLE(Se E1T1(Optional) SINGLE carried on the n Type lect one board or a single link) link.
LS
Link select
This parameter specifies whether ALL(Select to select all the all links), E1/T1 links PORT(Sele SET ALL, carried on a ct one port COPTLNK(Ma Enumeratio PORT, board, all the links), ndatory) n Type SINGLE E1/T1 links SINGLE(Se carried on a port, lect one or a single E1/T1 link) link.
8/7/2013
5773267
162734118.xls.ms_office1
LSN
This parameter specifies the ADD number of the slot Interval VPCLCX(Mand in which the lowType atory) end port carries the VPL/VCL cross connection.
14~27
14 to 27
This parameter specifies the number of the ADD Low bearing subrack whose LSRN VPCLCX(Mand subrack No. low-end port atory) carries the VPL/VCL cross connection. This parameter specifies the number of the UNI link corresponding to the low-end port. For the AEUa, the number ranges from 0 to 31. For ADD the AOUa in E1 Low UNI link LUNILNKN VPCLCX(Optio transmission No. nal) mode, the number ranges from 0 to 125. For the AOUa in T1 transmission mode, the number ranges from 0 to 167. The bearing UNI link is configured.
Interval Type
0~5
0 to 5
Interval Type
0~167
0 to 167
LVCI
Low VCI
This parameter ADD specifies the VCI Interval VPCLCX(Optio of the low-end Type nal) VCL.
32~65535
32 to 65535
8/7/2013
5783267
162734118.xls.ms_office1
This parameter specifies the VPI ADD of the low-end Interval VPCLCX(Mand VPL/VCL. For Type atory) the VPL is cross connected, VPI cannot be 0.
LVPI
Low VPI
0~255
0 to 255
This parameter M3UA service SET specifies the M3UASRVP listening port SCTPSRVPOR number of the N No. T(Optional) M3UA service listening port.
Interval Type
1024~6553 1024~6553 5 5
This parameter defines the times of retransmission of paging messages. If the times of SET retransmission DPUCFGDAT exceeds the value A(Optional) of this parameter, retransmission stops. For details, refer to the 3GPP TS 25.331 protocol. This parameter specifies the DTX cycle at the MAC layer when the SET MAC layer DTXDRXPAR supports UL A(Optional) EDCH inactivity. For details, refer to the 3GPP TS 25.331 protocol.
Interval Type
0~2
0~2
1,4,5,8,10,1 6,20
8/7/2013
5793267
162734118.xls.ms_office1
This parameter specifies the period during which the EDCH is not activated. D1, D2, After the EDCH D4, D8, SET is activated, data D16, D32, DTXDRXPAR can be transmitted Enumeratio D64, D128, A(Optional) on the EDCH n Type D256, within the period D512, specified by INFINITY MacDtxCycle. For details, refer to the 3GPP TS 25.331 protocol.
This parameter specifies the maximum size of PDUs transmitted Cell_FACH SET at the MAC layer MacPduMaxS L2 enhance FRC(Optional) when the UE is in izeForEFach max PDU size the CELL_FACH state in the L2 enhanced scenario. This parameter specifies the maximum size of PDUs transmitted Cell_DCH L2 MacPduMaxS SET at the MAC layer enhance max izeForL2Enha FRC(Optional) when the UE is in PDU size nce the CELL_DCH state in the L2 enhanced scenario. ADD ETHMA(Mand atory) ADD ETHMEP(Man datory) ACT This parameter MAIDX MA Index ETHCC(Manda specifies an MA. tory) PING MAC(Mandator y) TRC MAC(Mandator y)
Interval Type
4~1504
4~1504
Interval Type
4~1504
4~1504
Interval Type
0~99
0 to 99
8/7/2013
5803267
162734118.xls.ms_office1
MAINLINK
SAAL, SCTP. SAAL(SAA For detailed L Link Type information of SAAL, Enumeratio ), this parameter, SCTP n Type SCTP(SCT refer to 3GPP TS P Link 25.430. Type) 1 to 20 characters
MANAME
MA Name
String Type -
MapSwitch
Service mapping strategy switch. 1) MAP_HSUPA_T TI_2MS_SWITC H: When the switch is on, 2 ms TTI is supported for HSUPA. 2) MAP_INTER_R AT_PS_IN_CHA NLE_LIMIT_SW ITCH: When the SET switch is on, the Service CORRMALGO PS services are Bit Field mapping SWITCH(Optio transmitted on the Type strategy switch nal) DCH during the 2G-to-3G handover. When the switch is not on, the PS services can be transmitted on suitable channels according to the algorithm parameter configured for the RNC during the 2G-to-3G handover.
MAP_HSU PA_TTI_2 MS_SWIT CH, MAP_INTE R_RAT_PS _IN_CHAN LE_LIMIT_ SWITCH, MAP_PS_B E_ON_E_F ACH_SWI TCH, MAP_PS_S TREAM_O N_E_FACH _SWITCH, MAP_PS_S TREAM_O N_HSDPA_ SWITCH, MAP_PS_S TREAM_O N_HSUPA_ SWITCH, MAP_SRB _6800_WH EN_RAB_ ON_HSDS CH_SWITC H
MAP_HSU PA_TTI_2 MS_SWIT CH, MAP_INTE R_RAT_PS _IN_CHAN LE_LIMIT_ SWITCH, MAP_PS_B E_ON_E_F ACH_SWI TCH, MAP_PS_S TREAM_O N_E_FACH _SWITCH, MAP_PS_S TREAM_O N_HSDPA_ SWITCH, MAP_PS_S TREAM_O N_HSUPA_ SWITCH, MAP_SRB _6800_WH EN_RAB_ ON_HSDS CH_SWITC H
8/7/2013
5813267
162734118.xls.ms_office1
MASK
B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, B11, Enumeratio B12, B13, n Type B14, B15, B16, B17, B18, B19
B1,B2, B3,B4, B5,B6, B7,B8, B9,B10, B11, B12, B13, B14, B15, B16, B17, B18, B19
MASK
Subnet mask
MASK
Subnet mask
MASK
Subnet mask
MASK
Subnet mask
MASK
Subnet mask
MASK
Subnet mask
This parameter ADD specifies the DEVIP(Mandat subnet mask of ory) the board. This parameter ADD specifies the PPPLNK(Mand subnet mask for atory) the PPP link. This parameter ADD specifies the MPGRP(Manda subnet mask for tory) the MLPPP group. This parameter ADD specifies the ETHIP(Mandat subnet mask of ory) the Ethernet port. This parameter ADD specifies the EMSIP(Mandat subnet mask of ory) the EMS. This parameter ADD specifies the ETHTRKIP(Ma subnet mask of a ndatory) trunk group.
IP Address Type
0.0.0.0~255 .255.255.25 5 0.0.0.0~255 .255.255.25 5 0.0.0.0~255 .255.255.25 5 0.0.0.0~255 .255.255.25 5 0.0.0.0~255 .255.255.25 5 0.0.0.0~255 .255.255.25 5
IP Address Type
IP Address Type
IP Address Type
IP Address Type
IP Address Type
8/7/2013
5823267
162734118.xls.ms_office1
The maximum allowed uplink transmit power of ADD a UE in the cell, CELLSELRES which is related to EL(Optional) Interval the network ADD Type planning. For NRNCCELL(M detailed andatory) information, refer to 3GPP TS 25.304.
-50~33
-50~33
MaxAllowed UlTxPowerIn d
MaxAntenna Range
MaxAntenna RangeImp
TRUE(Conf igure the maximum uplink This parameter power of Max allowed ADD indicates whether UE), UE UL TX NRNCCELL(O to configure the Enumeratio TRUE,FAL FALSE(Not power ind ptional) maximum TX n Type SE configure power. the maximum uplink power of UE) Maximum coverage of the cell antenna. ADD Cell Antenna This is controlled Interval SMLCCELL(O 1~100000 1~100000 Max Coverage by MTRLGY and Type ptional) valid when MET~0(metric system). This parameter specifies the maximum coverage of the ADD Cell Antenna Interval cell antenna. SMLCCELL(O 3~328080 3~328080 Max Coverage This is controlled Type ptional) by MTRLGY and valid when IMP~1(British measurement).
8/7/2013
5833267
162734118.xls.ms_office1
If the number of the association retransmissions exceeds the value, the association is going to be ADD deleted. And the Association Interval MAXASSOC SCTPLNK(Opti maximum number max retransfer Type RETR onal) of the association retransmissions must be greater than the maximum number of the path retransmissions. The maximum number of attempts to perform interfrequency handovers. This parameter specifies the maximum number ADD of attempts for CELLMBDRIN the RNC to Interval TERFREQ(Opti perform inter-freq Type onal) handover after inter-freq handover failure. The handover attempts should involve the cells that have not been tried but satisfy the handover conditions.
0~254
0~254
0~3
{0~3}
8/7/2013
5843267
162734118.xls.ms_office1
This parameter specifies the maximum number of attempts for the RNC to perform interRAT handovers after a cellADD oriented CELLMBDRIN measurementInterval TERRAT(Optio based DRD inter- Type nal) RAT handover failure. The handover attempts should involve the cells that have not been tried but satisfy the handover conditions. ADD TYPRABBASI C(Mandatory) ADD CELLRLPWR( Mandatory) This parameter specifies the Interval maximum bit rate Type of the typical service.
0~3
{0~3}
MaxBitRate
Max rate
0~2560000 0~2560000 00 00
MAXBW
Max bandwidth
This parameter specifies the maximum ADD bandwidth for the Interval IPLOGICPORT dynamic Type (Mandatory) bandwidth adjustment on the logical port.
1~1000
64~64000 step:64
8/7/2013
5853267
162734118.xls.ms_office1
Maximum numbers of incoming calls in one second when the load is lower than the forwarding threshold. When the CPU usage is lower than the SET sharing out CTRLPLNSHA threshold and Interval REPARA(Optio overload Type nal) threshold, and call numbers in each second reach the threshold, new arrival call attempts will be shared out to other SPU and none will be shared in this SPU. Maximum numbers of incoming calls in one second when the load exceeds the forwarding threshold. When the CPU usage is between the sharing out SET threshold and CTRLPLNSHA overload Interval REPARA(Optio threshold, and Type nal) call number in one second reaches the threshold, new arrival call attempts will be shared out to other SPU and none will be shared in this SPU. Maximum number of ADD Interval retransmissions SAALLNK(Opt upon expiration Type ional) of the connection control timer.
0~255
0~255
0~255
0~255
MAXCC
MaxCC
4~8
4~8
8/7/2013
5863267
162734118.xls.ms_office1
This parameter specifies the maximum number of cells in the active set. This parameter can achieve the balance between the signal quality in the SHO area and the performance of the system. The ADD more cells the CELLINTRAF active set Max number REQHO(Option contains, the Interval MaxCellInAc of cell in active al) larger macro Type tiveSet set SET diversity gain the INTRAFREQH user obtains in the O(Optional) SHO area, and the smaller the intra-frequency interference is. But in this case, the user occupies resources of several cells, which increases the amount of data to be processed by the system and lowers Max common Max Common ADD channel priority MaxCmchPi channel FACH(Optional supported by priority ) FACH.
1~6
1~6
D0, D1, D2, D3, D4, D5, D6, D7, Enumeratio D8, D9, 0, 1,..., 15 n Type D10, D11, D12, D13, D14, D15
This parameter specifies the maximum value of Ec/NO in the EFACH Ec/N0 SET adjustment RACHMEASU Interval algorithm. The REPARA(Optio Type formula is y = x * nal) 0.5 - 24.5dB ("y" represents the actual value and "x" represents the GUI value).
0~49
8/7/2013
5873267
162734118.xls.ms_office1
This parameter determines the maximum number of links in the EDCH active set. When the RNC acts as the SRNC, the number of links in the EDCH active set for all the UEs under the RNC cannot exceed the parameter value. If the parameter SET value is too large, Interval HOCOMM(Opt a lot of resources Type ional) on the RAN side will be occupied as the same data is transferred over multiple EDCH links in macro diversity, thus affecting the system performance. If this parameter value is too small, insufficient combination gain can be achieved
1~4
1~4
This parameter specifies the maximum number ADD of HARQ Interval TYPRABOLPC retransmissions of Type (Mandatory) the MAC-es flow that carries this service.
0~15
0~15
Maximum ADD number of users Interval CELLCAC(Opti supported by the Type onal) EFACH channel.
0~48
0~48
8/7/2013
5883267
162734118.xls.ms_office1
The offset between the FACH transmit power and PCPICH transmit power in a cell.If MaxFachPower is excessively low, the UE at the cell verge fails to receive correctly the services and signaling borne over the FACH, Max transmit ADD resulting in the Interval MaxFachPow power of FACH(Optional influence on the Type er FACH ) downlink common channel coverage and the cell coverage. If MaxFachPower is excessively high, other channels are interfered, the downlink power resources are occupied, and consequently the cell capacity is influenced.
-350~150
ADD Maximum Maximum Frame Interval MAXFRAM IPPATH(Option Frame Length Length. Type ELEN al)
135~1031
135~1031
Maximum number of SET satellites whose Interval SMLC(Optional ephemeris can be Type ) delivered when the A-GPS method is used.
4~16
4~16
8/7/2013
5893267
162734118.xls.ms_office1
Maximum number of users supported by the HSDPA channel. The user in this parameter refers to the user with services on the HSDPA channel, regardless of the number of RABs carried on the HSDPA channel. Maximum HSDPA user ADD number cannot CELLCAC(Opti exceed the onal) HSDPA capability of the NodeB product, In practice, the value can be set based on the cell type and the richness of the available HSDPA power and code resources. If the value is too low, the cell HSDPA capacity may be reduces, leading Maximum number of users supported by the HSUPA channel.The user in this parameter refers to the user with services on ADD the HSUPA CELLCAC(Opti channel, onal) regardless of the number of RABs carried on the HSUPA channel. Maximum HSUPA user number cannot exceed the
Interval Type
0~100
0~100
Interval Type
0~100
0~100
8/7/2013
5903267
162734118.xls.ms_office1
Max allowed number of continuous invalid measurement reports. For detailed information of this parameter, refer to 3GPP TS 25.433. The parameter value must be greater than or equal to the maximum length of a sub-frame for PPP multiplexing (MAXSFLEN). This parameter can also be associated with the maximum size of the MLPPP flake to control whether the frames are fragmented after the multiplexing. In addition, to enable PPP multiplexing, two or more subframes should be configured. That is, "PPP mux max son-frame length" (MAXSFLEN) and "PPP mux max mux-frame length" (MAXMFLEN) should satisfy the
Interval Type
2~255
2~255
ADD PPPLNK(Optio PPP mux max nal) mux-frame MAXMFLEN ADD length MPGRP(Option al)
Interval Type
1~1500
1 to 1500
8/7/2013
5913267
162734118.xls.ms_office1
This parameter specifies the maximum number of channelization codes supported by uplink Maximum ADD Interval DPDCH. The MaxNrOfUlD codes of uplink NODEBLMTP larger the value of Type pchs DPDCH ARA(Optional) this parameter, the more the available channelization codes of uplink DPDCH. Maximum ADD number of Interval SAALLNK(Opt retransmitted Type ional) PDUs during the proving.
1~6
1~6
MAXNRP
Max_NRP
0~10
0~10
If the number of the path retransmissions exceeds the value, the link is going to be deactivated automatically. ADD And the Interval SCTPLNK(Opti maximum number Type onal) of the path retransmissions must be less than the maximum number of the association retransmissions.
0~254
0~254
8/7/2013
5923267
162734118.xls.ms_office1
Maximum TX power of the PCPICH in a cell. This parameter should be set based on the actual system environment such as cell coverage (radius) and Max transmit ADD geographical MaxPCPICH power of PCPICH(Option environment, and Power PCPICH al) the cell total power. When the ratio of soft handover areas keeps the same, the downlink coverage cannot be promoted by the increase of PCPICH power. Maximum number of data that can be transmitted during a polling period.Number of ADD Max Poll Data Sequenced Data MAXPD SAALLNK(Opt Count PDUs (SD PDUs) ional) that are allowed to be transmitted during the interval between two POLL messages. Maximum queue time of users. When a user initiates a call, it joins the queue due to cell resource insufficiency. SET Max queuing This parameter MaxQueueTi QUEUEPREE time length defines the meLen MPT(Optional) maximum length of time required for queuing of a user. If cell resources are still insufficient after expiration, access fails.
Interval Type
-100~500
Interval Type
Interval Type
1~60
1~60
8/7/2013
5933267
162734118.xls.ms_office1
This parameter specifies the maximum length of the PPP subframe. If the length of the PPP frame is greater than this parameter value, the frame cannot be used for PPP multiplexing. Note that this ADD parameter value PPPLNK(Optio should not be PPP mux max nal) greater than the MAXSFLEN son-frame ADD maximum length length MPGRP(Option of the PPP al) multiframe (MAXMFLEN). In addition, to enable PPP multiplexing, two or more subframes should be configured. That is, "PPP mux max son-frame length" (MAXSFLEN) and "PPP mux max mux-frame length" The parameter specifies the target value of the uplink load, which is decreased through HSUPA power control on the NodeB side. If Maximum ADD the parameter MaxTargetUl Target Uplink CELLHSUPA( value is set too LoadFactor load Factor Optional) low, the cell throughput will be too low. If the parameter value is set too high, it will bring much interference. For details about this parameter, refer to 3GPP TS
Interval Type
1~1500
1 to 1500
Interval Type
0~100
0~1, step:0.01
8/7/2013
5943267
162734118.xls.ms_office1
This parameter specifies the maximum duration for the single point positioning. Sum of the maximum transmit power of all DL channels in a cell. It is configured in the network planning. For detailed information of this parameter, refer to 3GPP TS 25.433. The maximum UL transmit power for background service in a specific cell. It is based on the UL coverage requirement of the background service designed by the network planning.The larger the value of this parameter is, the wider the coverage of the corresponding services will be. When the downlink coverage is exceeded, the uplink coverage and downlink coverage of the service will become unbalanced. If the values of these parameters are too small, the
MAXTIME
Interval Type
1~24
1 to 24
ADD CELLSETUP(O Max transmit ptional) MaxTxPower power of cell ADD QUICKCELLS ETUP(Optional)
Interval Type
0~500
Interval Type
-50~33
-50~33
8/7/2013
5953267
162734118.xls.ms_office1
Maximum UL transmit power for conversational service in a specific cell. It is based on the UL coverage requirement of the conversational service designed by the network planning.The larger the value of this parameter is, Max UL TX the wider the ADD power of coverage of the Interval MaxUlTxPow CELLCAC(Opti conversational corresponding Type erforConv onal) service services will be. When the downlink coverage is exceeded, the uplink coverage and downlink coverage of the service will become unbalanced. If the values of these parameters are too small, the uplink coverage
-50~33
-50~33
8/7/2013
5963267
162734118.xls.ms_office1
The maximum UL transmit power for the interactive service in a specific cell. It is based on the UL coverage requirement of the interactive service designed by the network planning.The larger the value of this parameter is, the wider the ADD coverage of the Interval CELLCAC(Opti corresponding Type onal) services will be. When the downlink coverage is exceeded, the uplink coverage and downlink coverage of the service will become unbalanced. If the values of these parameters are too small, the uplink coverage
-50~33
-50~33
8/7/2013
5973267
162734118.xls.ms_office1
Maximum UL transmit power for the streaming service in a specific cell. It is based on the UL coverage requirement of the streaming service designed by the network planning.The larger the value of this parameter is, the wider the ADD coverage of the Interval CELLCAC(Opti corresponding Type onal) services will be. When the downlink coverage is exceeded, the uplink coverage and downlink coverage of the service will become unbalanced. If the values of these parameters are too small, the uplink coverage
-50~33
-50~33
8/7/2013
5983267
162734118.xls.ms_office1
This parameter specifies the number of users selected in code reshuffling. Code reshuffling can be triggered only when the number of users on a code is no greater than the threshold. Code reshuffling has a big impact on the QoS. In addition, the reshuffled subscribers occupy two code resources during code reshuffling. Thus, the parameter should be set to a comparatively low value. Priority identifier of MBDR cells. TRUE indicates that the MBDR cell priority is valid in the celloriented measurementbased DRD algorithm, and the cell can be considered as the measurement object. FALSE indicates that the MBDR cell priority is invalid.
Interval Type
1~3
1~3
MBDRFlag
ADD INTERFREQN The flag of the CELL(Optional) MBDR ADD GSMNCELL(O ptional)
8/7/2013
5993267
162734118.xls.ms_office1
Priority of MBDR cells. The priority that corresponds to the MBDR cell is valid only when the MBDRFlag parameter is set to TRUE. The lower the priority, the easier it is for the MBDR cell to be delivered as the measurement object. For example, it is more possible for a MBDR cell of priority 1 than a cell of priority 2 to be delivered as the measurement object. This parameter specifies the index of the BFD. The check index is unique. If the check index is not specified, a unique value ranging from 0 to 31 is automatically allocated.
MBDRPrio
ADD INTERFREQN The priority of CELL(Optional) MBDR ADD neighbor cell GSMNCELL(O ptional)
Interval Type
0~15
0~15
Interval Type
0~31
0 to 31
This parameter STR specifies the local IP Address IPCHK(Mandat IP address of the Type ory) multi-hop BFD.
0.0.0.0~255 .255.255.25 5
MBFDSN
This parameter specifies the ADD number of the slot Interval IPRTBIND(Ma Type where the ndatory) command is executed.
14~27
14 to 27
8/7/2013
6003267
162734118.xls.ms_office1
This parameter specifies the ADD Interval number of the IPRTBIND(Ma subrack where the Type ndatory) command is executed.
MBFDSRN
0~5
0 to 5
MbmsAF
SET Activity factor of AF of MBMS Interval ADMCTRL(Op the MBMS service Type tional) service.
0~100
MBMSCCH DL
MBMS common ADD MBMS common Interval channel service TRMFACTOR( channel service Type downlink Optional) downlink factor. factor
0~100
0~100
Indicating ADD whether the CCH SCCPCHBASI Enumeratio COMMON, COMMON, carries the C(Optional) n Type MCCH MCCH MCCH.
8/7/2013
6013267
162734118.xls.ms_office1
When the priority of the RAB of MBMS services exceeds this threshold, reconfigure the MBMS power to the minimum power. The lower the parameter value is, the bigger the scope for selecting the MBMS services is, the more cell MBMS ADD load is decreased, Interval MbmsDecPo descend power CELLLDR(Opti the more effect Type werRabThd rab threshold onal) there is on the MBMS service. At the same time, the cell overload is significantly decreased while the impact on the MBMS services becomes bigger. The higher the parameter value is, the smaller the scope for selecting the MBMS services
1~15
1~15
8/7/2013
6023267
162734118.xls.ms_office1
A timer used to SET alarm for no Set mbms data MBMSALARM Interval MbmsInactT mbms data check check timer PARA(Mandato Type mr for MBMS ry) traffic.
1~10
1~10
ON denotes enabling of the MBMS Iub transmission SET resource sharing MBMS Iub OFF(OFF), MbmsIubShar MBMSSWITC function; OFF Enumeratio OFF, ON Sharing switch ON(ON) ingSwitch H(Optional) denotes disabling n Type of the MBMS Iub transmission resource sharing function. ADD Mobile MBMSALARM Mobile country MbmsMCC String Type 000~999 country code SERVICE(Man code of the RNC. datory) ADD Mobile MBMSALARM Mobile network MbmsMNC String Type 000~999 network code SERVICE(Man code of the RNC. datory)
8/7/2013
6033267
162734118.xls.ms_office1
ADD It is an indicator FALSE, INTRAFREQN of MBMS Enumeratio TRUE CELL(Optional) neighboring cell. n Type
FALSE,TR UE
MBMS service release is an extreme method in reducing the cell load and recovering the system when the cell is overloaded and congested. The mechanism of the OLC is that an action is ADD performed in each Interval CELLOLC(Opti [OLC period] and Type onal) some services are selected based on the action rules to perform this action. This parameter defines the maximum number of MBMS services released in executing downlink OLC
0~8
0~8
Mbms SET Indicating MbmsPreemp PreemptAlgoS QUEUEPREE whether MBMS tAlgoSwitch witch MPT(Optional) is supported.
OFF, ON
8/7/2013
6043267
162734118.xls.ms_office1
This parameter specifies the uplink bit rate of the MBMS service in PTP mode. The CN does not assign the uplink rate to the MBMS service, but the MBMS service in PTP mode is in acknowledged D8, D16, Mbms Ptp SET mode and D32, D64, MbmsPtpUlB UpLink Bit RNCMBMSPA Enumeratio requires the D128, itRate Rate RA(Optional) n Type uplink rate for D144, D256 RLC status reporting. It is a waste of uplink resources if the uplink bandwidth of an MBMS service in PTP mode is high. Therefore, it is recommended the default value be used. ADD CELLMBMSS MBMS SA ID. A(Mandatory) For detailed ADD information of Interval MbmsSaId MBMS SA ID MBMSSA(Man 0~65535 this parameter, Type datory) refer to the 3GPP ADD 25.346. SAMBMSPAR A(Mandatory) ADD MBMS MBMSALARM MBMS Service Interval MbmsService 0~1677721 ServiceId SERVICE(Man Identity. Type Id 5 datory)
0~65535
0~1677721 5
ON denotes enabling of the SET MBMS MBMS function; OFF(OFF), MbmsSwitch MBMSSWITC Enumeratio OFF, ON Control Switch OFF denotes ON(ON) H(Mandatory) n Type disabling of the MBMS function. The total MBMS throughput of all ACT the operators Interval LICENSE(Opti cannot exceed Type onal) that defined in the license file.
0~3910000
0 to 3910000
8/7/2013
6053267
162734118.xls.ms_office1
This parameter specifies the transport mode of MBMS services. The point-tomultipoint (PTM), point-topoint (PTP), and enhanced PTM (ENHANCEDPT M) modes are static or semistatic transport modes. They are relatively simple PTM, PTP, and have little ENHANCE Enumeratio impact on the DPTM, n Type MBMS service DYNAMIC and the network performance. The dynamic mode (DYNAMIC) is complicated. In dynamic mode, transition between PTP and PTM modes is performed dynamically to balance the quality of service and the network
ADD CELLMBMSP ARA(Optional) ADD Mbms MbmsTransM SAMBMSPAR Transfer Mode ode A(Optional) SET RNCMBMSPA RA(Optional)
MBS
This parameter ADD specifies the Max burst size ATMTRF(Opti maximum burst onal) size.
Interval Type
3~10000
3 to 10000
8/7/2013
6063267
162734118.xls.ms_office1
ADD CNOPERATO R(Mandatory) ADD LASNAMAP( Mandatory) ADD Mobile country String Type IMSISNAMAP( code of the RNC. Mandatory) ADD GSMCELL(Ma ndatory) SET MBMSPERF(M andatory)
MCC
000~999
This parameter SET Mcch Access specifies the MCCHPERIOD McchAccessP Period coefficient of COEF(Optional eriodCoef coefficient access period of ) the MCCH.
Interval Type
0~3
0~3
Interval Type
7~10
7~10
8/7/2013
6073267
162734118.xls.ms_office1
This parameter SET specifies the MCCHPERIOD coefficient of COEF(Optional repetition period ) of the MCCH.
Interval Type
0~3
0~3
MCCLASS
MC PRI number
This parameter specifies the priority of the ADD MC. This Interval MPGRP(Option parameter is valid Type al) only when "MLPPP type" is set to MCPPP.
4,8
4(Use two bytes to present MC priority number, 4 classes),8(U se four bytes to present MC priority number, 8 classes)
MCR
This parameter specifies the ADD Minimum cell minimum rate of ATMTRF(Opti rate ATM traffic. onal) Physical unit: cell/s or kbit/s.
Interval Type
30~117924
30 to 117924
MDIDX
MD Index
ADD ETHMD(Mand This parameter Interval atory) specifies an MD. Type ADD ETHMA(Mand atory) ADD This parameter ETHMD(Mand specifies the atory) name of an MD.
0~7
0 to 7
MDNAME
MD Name
String Type -
1 to 20 characters
8/7/2013
6083267
162734118.xls.ms_office1
Measurement quantity used in coverage-based inter-RAT measurement in event-3Atriggered reporting mode. - Ec/No: signal-tonoise ratio - RSCP: indicates the received signal code power CPICH_Ec/No indicates that the Ec/No Enumeratio measurement n Type quantity is used for event 3A measurement. The physical unit is dB; CPICH_RSCP indicates that the RSCP measurement quantity is used for event 3A measurement. The physical unit is dBm. AUTO indicates
MEPID
MEPSN
ADD ETHMEP(Man This parameter datory) MEP ID specifies an MEP ACT in an MA. ETHCC(Manda tory) This parameter specifies the ADD number of the MEP Slot No. ETHMEP(Man physical slot datory) where the local MEP in an MA resides.
Interval Type
1~100
1 to 100
Interval Type
14~27
14 to 27
8/7/2013
6093267
162734118.xls.ms_office1
MEPTYPE
MEP Type
This parameter specifies the type of an MEP to be added to an MA. ADD "LocalMep" LocalMep, LocalMep, ETHMEP(Man Enumeratio indicates a local RemoteMep RemoteMep datory) n Type MEP. "RemoteMep" indicates a remote MEP.
MHF
This parameter ADD specifies the LONG, MPGRP(Option Enumeratio MP/MC list head SHORT al) n Type option.
LONG(Lon g sequence number which is used by MP/MC head),SHO RT(Short sequence number which is used by MP/MC head) 0~255
MichId
MICH ID
ID of the MICH.
Interval Type
0~255
MichPower
TX power of the MICH. The greater the power of the MICH, the higher of the success ratio of ADD Interval the MBMS MICH Power CELLMCCH(O paging. However, Type ptional) more cell power resources are occupied. For details about this parameter, refer to the 3GPP
-10~5
-10~5
8/7/2013
6103267
162734118.xls.ms_office1
The value indicates whether the MICH uses time and space ADD MICH STTD TX diversity. For FALSE(Not FALSE, MichSttdInd CELLMCCH(O Enumeratio Indicator detailed Use), TRUE ptional) n Type information of TRUE(Use) this parameter, refer to the 3GPP TS 25.433.
MINBW
Min bandwidth
This parameter specifies the minimum ADD bandwidth for the Interval IPLOGICPORT dynamic Type (Mandatory) bandwidth adjustment on the logical port.
1~1000
64~64000 step:64
Min common Min Common ADD channel priority MinCmchPi channel FACH(Optional supported by priority ) FACH.
D0, D1, D2, D3, D4, D5, D6, D7, Enumeratio D8, D9, 0, 1,..., 15 n Type D10, D11, D12, D13, D14, D15
This parameter specifies the minimum spreading factor supported by downlink Minimum SF ADD SF4, SF8, SF4, SF8, DPDCH. The MinDlChCod of downlink NODEBLMTP Enumeratio SF16, SF32, SF16, SF32, larger the value of eLen DPCH ARA(Optional) n Type SF64 SF64 this parameter, the fewer the available spreading factors of downlink DPDCH.
8/7/2013
6113267
162734118.xls.ms_office1
This parameter specifies the minimum value of Ec/NO in the EFACH Ec/N0 adjustment algorithm. The formula is y = x * 0.5 - 24.5dB ("y" represents the actual value and "x" represents the GUI value). This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of AMR service is set to MIN. The DL code TX power is reported periodically after the event E1 is reported. This parameter specifies the reporting period. This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of BE service is set to MIN. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting period.
Interval Type
0~49
ADD CELLQUALIT AMR Event E YMEAS(Manda MinForAmrE Reporting tory) Period In Min SET QUALITYME AS(Mandatory)
Interval Type
1~60
1~60
MinForBeE
ADD CELLQUALIT BE Event E YMEAS(Manda Reporting tory) Period In Min SET QUALITYME AS(Mandatory)
Interval Type
1~60
1~60
8/7/2013
6123267
162734118.xls.ms_office1
This parameter is valid when the corresponding parameter related to the reporting ADD period unit for the CELLQUALIT event F of BE BE Event F YMEAS(Manda service is set to Interval Reporting tory) MIN. The DL Type Period In Min SET code TX power is QUALITYME reported AS(Mandatory) periodically after the event Fa is reported. This parameter specifies the reporting period.
MinForBeF
1~60
1~60
DL basic common SET measurement LDM(Mandator report cycle. For DL basic meas y) Interval MinForDlBas detailed rprt cycle SET Type icMeas information of SATLDM(Man this parameter, datory) refer to 3GPP TS 25.433.
1~60
1~60
8/7/2013
6133267
162734118.xls.ms_office1
Measurement report period of SET event E triggered LDM(Mandator by DL OLC. For DL OLC meas y) Interval MinForDlOlc detailed rprt cycle SET Type Meas information of SATLDM(Man this parameter, datory) refer to 3GPP TS 25.433. This parameter specifies the SET HSDPA bit rate LDM(Mandator measurement MinForHsdpa HSDPA bit y) report period. For Interval PrvidRateMe rate meas cycle SET Type detailed as SATLDM(Man information of datory) this parameter, refer to 3GPP TS 25.433. HSDPA power requirement SET measurement LDM(Mandator report period For HSDPA need y) Interval MinForHsdpa detailed pwr meas cycle SET Type PwrMeas information of SATLDM(Man this parameter, datory) refer to 3GPP TS 25.433. This parameter specifies the HSUPA bit rate measurement SET MinForHsupa HSUPA bit report period. For Interval LDM(Mandator PrvidRateMe rate meas cycle Type detailed y) as information of this parameter, refer to 3GPP TS 25.433.
1~60
1~60
1~60
1~60
1~60
1~60
1~60
1~60
8/7/2013
6143267
162734118.xls.ms_office1
UL basic common SET measurement LDM(Mandator report cycle. For UL basic meas y) Interval MinForUlBas detailed rprt cycle SET Type icMeas information of SATLDM(Man this parameter, datory) refer to 3GPP TS 25.433.
1~60
1~60
Measurement report period of SET event E triggered LDM(Mandator by UL OLC. For UL OLC meas y) Interval MinForUlOlc detailed rprt cycle SET Type Meas information of SATLDM(Man this parameter, datory) refer to 3GPP TS 25.433.
1~60
1~60
8/7/2013
6153267
162734118.xls.ms_office1
This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of VP service is set to MIN. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting period. This parameter specifies the minimum number of links required for an IMA group in the activated state. Minimum TX power of the PCPICH in a cell. This parameter should be set based on the actual system environment such as cell coverage (radius) and geographical environment. If MinPCPICHPow er is excessively small, the cell coverage is affected. Ensure that MinPCPICHPow er is set under the condition of a proper proportion of soft handover area, or under the condition that no coverage hole exists.
ADD CELLQUALIT VP Event E YMEAS(Manda MinForVpE Reporting tory) Period In Min SET QUALITYME AS(Mandatory)
Interval Type
1~60
1~60
Interval Type
1~32
1 to 32
Interval Type
-100~500
8/7/2013
6163267
162734118.xls.ms_office1
This parameter specifies the Min interval STR minimum interval Interval MINRXINT of BFD packet IPCHK(Optiona for receiving BFD Type receive l) packets in millisecond.
10~1000
10 to 1000
This parameter specifies the Min interval STR minimum interval Interval MINTXINT of BFD packet IPCHK(Optiona for sending BFD Type send l) packets in millisecond.
10~1000
10 to 1000
This parameter specifies the minimum spreading factor supported by Minimum SF ADD SF4, SF8, SF4, SF8, uplink DPDCH. MinUlChCod of uplink NODEBLMTP The larger the Enumeratio SF16, SF32, SF16, SF32, eLen DPDCH ARA(Optional) value of this n Type SF64 SF64 parameter, the fewer the available spreading factors of uplink
8/7/2013
6173267
162734118.xls.ms_office1
Maximum number of random access preamble loops. If the parameter value is excessively low, the UE access success rate is affected. If the parameter value is ADD excessively high, Max preamble Interval RACH(Optional the UE probably 1~32 loop Type ) tries the access attempt repeatedly within a long time, which increases the uplink interference. For detailed information of this parameter, refer to 3GPP TS 25.331. ADD CNOPERATO R(Mandatory) ADD GSMCELL(Ma ndatory) ADD Mobile Mobile network String Type LASNAMAP( network code code of the RNC. Mandatory) ADD IMSISNAMAP( Mandatory) SET MBMSPERF(M andatory)
Mmax
1~32
MNC
00~99,000~ 999
8/7/2013
6183267
162734118.xls.ms_office1
MOCN Control Switch.1) COMM_MOCN_ NRI_GLOBAL_ CONFIG_MODE _SWITCH: When the switch is selected, the NRI of any CN node in the RNC is unique in the CS SET or PS MOCN OPERATORSH domain.2)COMM Bit Field MocnControl Control Switch ARINGMODE( _MIB_MULTI_P Type Switch Optional) LMN_LIST_ALL OWED_SWITCH : When the switch is selected, the operator information configured in the MOCN cell is sent as Multi PLMN List in the system information.
COMM_M OCN_NRI_ GLOBAL_ CONFIG_ MODE_SW ITCH, COMM_MI B_MULTI_ PLMN_LIS T_ALLOW ED_SWITC H, SPARE_1_ SWITCH, SPARE_2_ SWITCH, SPARE_3_ SWITCH, SPARE_4_ SWITCH, SPARE_5_ SWITCH, SPARE_6_ SWITCH
COMM_M OCN_NRI_ GLOBAL_ CONFIG_ MODE_SW ITCH, COMM_MI B_MULTI_ PLMN_LIS T_ALLOW ED_SWITC H, SPARE_1_ SWITCH, SPARE_2_ SWITCH, SPARE_3_ SWITCH, SPARE_4_ SWITCH, SPARE_5_ SWITCH, SPARE_6_ SWITCH
This parameter SET determines OPERATORSH whether the RNC Enumeratio NO, YES ARINGMODE( supports the n Type Optional) MOCN function.
NO,YES
MODE
Configure mode
OFF,ON
8/7/2013
6193267
162734118.xls.ms_office1
MODE
MODE
MODE
MODE1(1: This parameter 1 Backup), SET specifies the MODE2(1+ Backup mode Enumeratio MSP(Optional) backup mode of 1 Single n Type the MSP function. End), MODE3(1+ 1 Both End) This parameter specifies the working mode of the system clock source. The system clock source can work in manual mode or in auto mode. If the parameter is SET System clock MANUAL, set to MANUAL, CLKMODE(Ma Enumeratio working mode AUTO you must specify ndatory) n Type the clock source for the system. If the parameter is set to AUTO, the system automatically selects the clock source against the clock switch policy. This parameter specifies the check mode. PRIMARY indicates the check on a STR PRIMARY, primary port. Check mode IPCHK(Mandat STANDBY Enumeratio STANDBY, ory) n Type INDEPEND indicates the ENT check on a standby port. INDEPENDENT indicates the check on an independent port.
MANUAL, AUTO
8/7/2013
6203267
162734118.xls.ms_office1
MODE
ADD Signalling link Working mode of SERVER, SCTPLNK(Man Enumeratio mode the SCTP link. CLIENT datory) n Type
SERVER, CLIENT
This timer is started when an AAL2 signaling entity receives from the peer SET node a request for Interval AAL2TMR(Opt Type modifying the ional) bandwidth of an AAL2 path and sends a modification indication. This timer is started when an AAL2 signaling SET entity sends the AAL2TMR(Opt peer node a ional) request for modifying an AAL2 connection.
5000~3000 5000~3000 0 0
MODREQT MR
Interval Type
5000~3000 5000~3000 0 0
8/7/2013
6213267
162734118.xls.ms_office1
MoniterPrd
This parameter specifies a sampling period ADD of retransmission re-TX monitor Interval TYPRABRLC( ratio monitoring period Type Optional) after the RLC entity is established or reconfigured.
40~60000
40~60000
Length of the period within which the times of consecutive failure to increase the rate of a BE service is monitored. Increase of the BE service rate is triggered by 4A DCCC Rate SET measurement Up Fail Interval MoniTimeLe DCCC(Optional reports.IF the Monitor Time Type n ) times exceeds the length DCCC Rate Up Fail Time Threshold, the DCCC Rate Up Fail Penalty Timer will be started, and 4A report will not be processed until DCCC Rate Up Fail Penalty
1~65535
1~65535
8/7/2013
6223267
162734118.xls.ms_office1
This parameter ADD specifies the MP IP Address NODEBESN(M IP address for the Type andatory) DHCP server.
0.0.0.0~255 .255.255.25 5
MPGRPN
Interval Type
0~63
0 to 63
8/7/2013
6233267
162734118.xls.ms_office1
Management proving status of the SAAL link.When Management Proving Status is set to MPS_NORMAL, the SAAL sends proving PDUs in its initial alignment. When MPS_EME it is set to ADD RGENCY, Management MPS_EMERGE SAALLNK(Opt Enumeratio MPS_NOR proving status NCY, the SAAL ional) n Type MAL, does not send any MPS_NEU proving PDU in TRAL its initial alignment. When it is set to MPS_NEUTRAL , the SAAL decides whether to send proving PDUs as required by users and the peer end in its initial alignment. ADD This parameter MPGRP(Option specifies the al) MLPPP type.
MPS
MPTYPE
MLPPP type
MPUSLOT
This parameter specifies the ADD MPU Slot No. number of a slot BRD(Optional) that holds the MPU.
Interval Type
0,2,4,8,10
0,2,4,8,10
8/7/2013
6243267
162734118.xls.ms_office1
This switch specifies whether to add the MSCH logical channel on the SCCPCH. When multiMTCH logical channels are Msch Switch SET carried on one For MtchMulti MBMSSWITC SCCPCH, an Sccpch H(Optional) MSCH logical channel should be added on the SCCPCH, which is used to send scheduling control information of the data of MTCH. This parameter specifies whether to add the MSCH logical channel on the SCCPCH. When one MTCH logical channel is Msch Switch carried on one SET For SCCPCH, an MBMSSWITC NonMtchMulti MSCH logical H(Optional) Sccpch channel should be added on the SCCPCH, which is used to send scheduling control information of the data of MTCH.
MschSwitchF orMtchMulti
8/7/2013
6253267
162734118.xls.ms_office1
MsgContent
Msg Content
Any Type
1~100 characters
MsgInd
Message Indicator
When the parameter value is ON,the broadcast OFF(Messa ADD message is ge is CELLCBSSAC( valid,When Enumeratio OFF,ON invalid), Optional) OFF,the n Type ON(Messag broadcast e is valid) message is invalid.
8/7/2013
6263267
162734118.xls.ms_office1
MSPCMD
CLEAR(Cle ared), LOP(Locko ut of Protection), FS(Forcibly switchover working link to This parameter protection specifies the link), SET control command MS(Manual CLEAR,LO MSPCMD(Man Enumeratio of the MSP switchover P,FS,MS,E datory) n Type switchover XERS, from protection group. working link to protection link), EXERS(Exe rcisely switch working link to protection link)
8/7/2013
6273267
162734118.xls.ms_office1
Maximum power limit of all the MTCHs. This parameter is a limit to the maximum bearing of the MBMS PTM bearing. When the power of all the MTCHs are little, preemption of MBMS PTM bearing should be ADD MTCH avoided. This is Interval CELLCAC(Opti MtchMaxPwr maximal power because the Type onal) MBMS PTM bearing serves multiple users at the same time. The value should not be too high. Otherwise, all the system resources may be consumed by the MBMS PTM bearing and too little capacity is left for the nonMBMS services.
0~100
0~1, step:0.01
8/7/2013
6283267
162734118.xls.ms_office1
Maximum code limit of all the MTCHs. This parameter is a limit to the maximum bearing of the MBMS PTM bearing. When the code of all the MTCHs are few, preemption of MBMS PTM bearing should be ADD avoided. This is Interval CELLCAC(Opti because the Type onal) MBMS PTM bearing serves multiple users at the same time. The value should not be too high. Otherwise, all the system resources may be consumed by the MBMS PTM bearing and too little capacity is left for the nonMBMS services.
MtchMaxSf
MTCH maximal SF
0~63
0~63
8/7/2013
6293267
162734118.xls.ms_office1
This parameter specifies the minimum coverage percentage of the MTCH corresponding to the RAB priority of 0. When the cell load is high, the RNC configures low power for the ADD MBMS service so CELLMBMSF as to avoid Mtch Minimal ACH(Optional) worsening Interval MtchMinPerc Power Percent SET congestion in the Type 0 for priority 0 MBMSFACH( cell and improve Optional) the setup success rate of the MBMS service. This low power, however, should cover the minimum coverage area of the MBMS service. The minimum coverage area is set to a certain percentage of the coverage area
0~100
8/7/2013
6303267
162734118.xls.ms_office1
This parameter specifies the minimum coverage percentage of the MTCH corresponding to the RAB priority of 15. When the cell load is high, the RNC configures low power for the MBMS service so as to avoid worsening congestion in the cell and improve the setup success rate of the MBMS service. This low power, however, should cover the minimum coverage area of the MBMS service. The minimum coverage area is set to a certain percentage of the coverage area This parameter specifies the MTCH multiplexing threshold. When the rate of an MBMS service is lower than this threshold, the service, together with other services, is allocated a multiplexed SCCPCH, whose transmission rate is set to the MTCH multiplexing threshold fixedly.
ADD CELLMBMSF Mtch Minimal ACH(Optional) MtchMinPerc Power Percent SET 15 for priority 15 MBMSFACH( Optional)
Interval Type
0~100
D16, D32, 16, 32, 64, Enumeratio D64, D128, 128, 256 n Type D256
8/7/2013
6313267
162734118.xls.ms_office1
This parameter specifies whether to apply Robust Header SET Mtch Rohc Compression MtchRohcSwi MTCH(Optiona Switch (ROHC) on the tch l) MTCH. The value TRUE indicates to apply ROHC on the Available guarantee power of all the MTCHs. This parameter is a protection for the MBMS PTM bearing. When the power of all the MTCHs are little, pre-emption of MBMS PTM bearing should be ADD MTCH avoided. This is MtchRsvPwr CELLCAC(Opti reserve power because the onal) MBMS PTM bearing serves multiple users at the same time. The value should not be too high. Otherwise, all the system resources may be consumed by the MBMS PTM bearing and too little capacity is left for the non-
Interval Type
0~100
0~1, step:0.01
8/7/2013
6323267
162734118.xls.ms_office1
Available guarantee codes of all the MTCHs. This parameter is a protection for the MBMS PTM bearing. When the codes of all the MTCHs are few, pre-emption of MBMS PTM bearing should be ADD avoided. This is Interval CELLCAC(Opti because the Type onal) MBMS PTM bearing serves multiple users at the same time. The value should not be too high. Otherwise, all the system resources may be consumed by the MBMS PTM bearing and too little capacity is left for the non-
MtchRsvSf
MTCH reserve SF
0~63
0~63
MTRLGY
Metrology
The OM MET(Metri ADD interface supports c System), SMLCCELL(O localization and Enumeratio 0~1 IMP(British ptional) MET or IMP can n Type Measureme be selected. nt)
8/7/2013
6333267
162734118.xls.ms_office1
MTRLGY
MTRLGY
ADD GPS(Optional)
This parameter specifies whether the metric system Enumeratio MET(MET) MET, IMP or the imperial n Type , IMP(IMP) system is used.
MTU
MTU
256~1500
256 to 1500
MUXTIME
This parameter specifies the maximum time Interval elapsed before the Type sub-frames over the PPP link are multiplexed.
1~1500
1 to 1500
8/7/2013
6343267
162734118.xls.ms_office1
MYDISCRI MINATOR
My discriminator of BFD
This parameter STR specifies the IPCHK(Optiona discriminator of l) the check on the local end.
Interval Type
1~16
1~16
N1
N1
Number of proving PDUs ADD transmitted Interval SAALLNK(Opt during the Type ional) proving.Referenc e to ITU-T Q2110. Maximum number of retransmissions of the RRC CONNECTION REQUEST message. Maximum number of retransmissions of CELL UPDATE/URA UPDATE.Protoco l default value is 3. Maximum number of retransmissions of UE CAPABILITY INFORMATION. Protocol default value is 2. Maximum number of retransmission of RRC CONNECTION RELEASE COMPLETE.
10~2000
10~2000
N300
Constant 300
Interval Type
0~7
0~7
N302
Constant 302
Interval Type
0~7
0~7
N304
Constant 304
Interval Type
0~7
0~7
N308
Constant 308
Interval Type
1~8
1~8
8/7/2013
6353267
162734118.xls.ms_office1
Maximum D1, D2, number of D4, D10, successive "in D20, D50, sync" indications Enumeratio D100, received from L1. n Type D200, Protocol default D400, value is 1. D600, D1, D2, D4, D10, D20, D50, D100, D200, D400, D600,
N312
Constant 312
N313
Constant 313
Maximum number of D1, D2, SET successive "out of D4, D10, CONNMODET sync" indications Enumeratio D20, D50, IMER(Optional) received from L1. n Type D100, D200 Protocol default value is 20. Maximum number of successive "in sync" indications received from L1 when T313 is activated. Protocol default value is 1. Maximum number of resend times of message "RRC CONNECTION SETUP" or "CELL UPDATE CONFIRM". default value is 1. D1, D2, D4, D10, D20, D50, D100, Enumeratio D200, n Type D400, D600, D800, D1000
N315
Constant 315
D1, D2, D4, D10, D20, D50, D100, D200, D400, D600, D800, D1000
N381
Constant 381
D1,D2,D3, D4
8/7/2013
6363267
162734118.xls.ms_office1
ADD MTP3RT(Mand atory) ADD MTP3LKS(Man datory) ADD ADJNODE(Ma ndatory) ADD MTP3LNK(Ma ndatory) ADD M3DE(Mandato ry) ADD Name of the M3LE(Mandato MTP3RT. ry) ADD M3LKS(Mandat ory) ADD M3LNK(Manda tory) ADD M3RT(Mandato ry) ADD N7DPC(Mandat ory) ADD OPC(Mandatory
NAME
String Type -
1~31 characters
NB01max
Upper limit of random access back-off delay. ADD Random backFor details, refer Interval RACH(Optional off upper limit to the 3GPP TS Type ) 25.331 and 3GPP TS 25.214 protocols.
0~50
0~50
8/7/2013
6373267
162734118.xls.ms_office1
NB01min
Lower limit of random access back-off delay. ADD Random backFor details, refer Interval RACH(Optional off lower limit to the 3GPP TS Type ) 25.331 and 3GPP TS 25.214 protocols.
0~50
0~50
When call shock control starts, the SET AMR_RRC Interval CALLSHOCKC number can be Type TRL(Optional) accessed per second for NodeB.
1~200
1~200
This parameter NBAP service SET specifies the NBAPSRVP listening port SCTPSRVPOR number of the N No. T(Optional) NBAP service listening port.
Interval Type
1024~6553 1024~6553 5 5
8/7/2013
6383267
162734118.xls.ms_office1
NBATMOA MIP
This parameter NodeB ADD specifies the OM IP Address ATM_TRANS NODEBIP(Man address for Type IP address datory) NodeB ATM transport.
0.0.0.0~255 .255.255.25 5
NBATMOA MMASK
This parameter NodeB ADD specifies the OM IP Address ATM_TRANS NODEBIP(Man mask for NodeB Type IP Mask datory) ATM transport.
0.0.0.0~255 .255.255.25 5
8/7/2013
6393267
162734118.xls.ms_office1
When call shock control starts, the register and 3GSET Interval >2G reselect CALLSHOCKC Type number can be TRL(Optional) accessed per second for NodeB.
1~200
1~200
This parameter NodeB ADD specifies the OM IP Address IP_TRANS IP NODEBIP(Man address for NBIPOAMIP Type address datory) NodeB IP transport.
0.0.0.0~255 .255.255.25 5
8/7/2013
6403267
162734118.xls.ms_office1
This parameter NodeB ADD specifies the OM IP Address NBIPOAMM IP_TRANS IP NODEBIP(Man mask for NodeB Type ASK Mask datory) IP transport.
0.0.0.0~255 .255.255.25 5
NBLB1
ADD This parameter The First NODEBESN(M specifies the first Serial Number andatory) ESN.
String Type -
1 to 30 characters
NBLB2
ADD This parameter The Second NODEBESN(M specifies the Serial Number andatory) second ESN.
String Type -
1 to 30 characters
8/7/2013
6413267
162734118.xls.ms_office1
The above values of the algorithms represent the following information: CRD_ADCTRL: Control NodeB Credit admission control algorithm Only when IUB_CONG_CA C_SWITCH which is set by the SET ADD CACALGOSWIT CELLALGOS CH command and Bit Field WITCH(Option this switch are Type al) on,the NodeB Credit admission control algorithm is valid. HSDPA_UU_AD CTRL: Control HSDPA UU Load admission control algorithm HSDPA_GBP_M EAS: Control HSDPA HSDSCH Required Power measurement
CRD_ADC TRL(Credit Admission Control Algorithm), HSDPA_U U_ADCTR L(HSDPA UU Load Admission Control Algorithm), HSUPA_U U_ADCTR L(HSUPA UU Load Admission Control Algorithm), MBMS_UU _ADCTRL( MBMS UU Load Admission Control Algorithm), HSDPA_G BP_MEAS( HSDPA GBP Meas Algorithm),
CRD_ADC TRL,HSDP A_UU_AD CTRL,HSU PA_UU_A DCTRL,M BMS_UU_ ADCTRL,H SDPA_GBP _MEAS,HS DPA_PBR_ MEAS,DOF FC,HSUPA _PBR_ME AS,HSUPA _EDCH_RS EPS_MEAS ,EMC_UU_ ADCTRL,F ACH_UU_ ADCTRL
8/7/2013
6423267
162734118.xls.ms_office1
The algorithms with the above values represent are as follow: ALGORITHM_O FF: Disable downlink call admission control algorithm. ALGORIT ALGORITHM_F HM_OFF, ALGORIT IRST: The load ALGORIT HM_OFF,A factor prediction ADD HM_FIRST LGORITH Downlink algorithm will be CELLALGOS , M_FIRST, NBMDlCacA CAC algorithm used in downlink Enumeratio WITCH(Manda ALGORIT ALGORIT lgoSelSwitch switch CAC. n Type tory) HM_SECO HM_SECO ALGORITHM_S ND, ND,ALGO ECOND: The ALGORIT RITHM_T equivalent user HM_THIR HIRD number algorithm D will be used in downlink CAC. ALGORITHM_T HIRD: The loose call admission control algorithm will be used in downlink CAC.
8/7/2013
6433267
162734118.xls.ms_office1
The algorithms with the above values represent are as follow: INTRA_FREQU ENCY_LDB: Intra-frequency load balance algorithm. It is also named cell breathing algorithm.Based on the cell load, this algorithm ADD changes the pilot CELLALGOS power of the cell Bit Field WITCH(Option to control the load Type al) between intrafrequency cells. PUC: Potential user control algorithm. Based on the cell load, this algorithm changes the selection/reselecti on parameters of a cell to lead the UE to a lighter loaded cell. UL_UU_OLC: UL UU overload
INTRA_FR EQUENCY _LDB(Intra Frequency LDB Algorithm), PUC(Potent ial User Control Algorithm), UL_UU_L DR(Uplink UU LDR Algorithm), DL_UU_L DR(Downli nk UU LDR Algorithm), UL_UU_O LC(Uplink UU OLC Algorithm), DL_UU_O LC(Downli nk UU OLC Algorithm), OLC_EVE NTMEAS( OLC Event Meas Algorithm),
INTRA_FR EQUENCY _LDB,PUC, UL_UU_L DR,DL_UU _LDR,UL_ UU_OLC,D L_UU_OL C,OLC_EV ENTMEAS, CELL_CO DE_LDR,C ELL_CRED IT_LDR
8/7/2013
6443267
162734118.xls.ms_office1
The algorithms with the above values represent are as follow: NBM_LDC_ALL _UE: When interfrequency blind NBM_LDC handover select _ALL_UE( user occurs, no Select all need to consider users), whether target NBM_LDC cell support users. _MATCH_ NBM_LDC_MA UE_ONLY( ADD TCH_UE_ONLY BHO Select Select users CELLALGOS : When interNbmLdcBHO User algorithm Enumeratio match target WITCH(Option frequency blind UeSelSwitch switch n Type cell support al) handover select only), user occurs, only NBM_LDC consider users _MATCH_ supported by UE_FIRST( target cell. Select users NBM_LDC_MA match target TCH_UE_FIRST cell support : When interfirst) frequency blind handover select user occurs, first consider users supported by target cell.
The algorithms with the above values represent are as follow: ALGORITHM_R EQUIRED: Always reset the ALGORIT mac-hs no matter ALGORIT ADD HM_REQU the cells in Mac-hs Reset HM_REQU NBMMachsR CELLALGOS question are in IRED, algorithm Enumeratio IRED,ALG esetAlgoSelS WITCH(Option the same NodeB ALGORIT switch n Type ORITHM_ witch al) HM_DEPE or not. DEPEND_ ND_ON_L ALGORITHM_D ON_LCG CG EPEND_ON_LC G: Reset the machs only when the cells in question are in the different local cell group.
8/7/2013
6453267
162734118.xls.ms_office1
The algorithms with the above values represent are as follow: ALGORITHM_O FF: Disable uplink call admission control ALGORIT algorithm. HM_OFF, ALGORIT ALGORITHM_F ALGORIT HM_OFF,A IRST: The load ADD HM_FIRST LGORITH factor prediction CELLALGOS algorithm will be , M_FIRST, Enumeratio WITCH(Manda used in uplink ALGORIT ALGORIT n Type tory) HM_SECO HM_SECO CAC. ND, ND,ALGO ALGORITHM_S ALGORIT RITHM_T ECOND: The HM_THIR HIRD equivalent user D number algorithm will be used in uplink CAC. ALGORITHM_T HIRD: The loose call admission control algorithm will be used in
8/7/2013
6463267
162734118.xls.ms_office1
This parameter is used to identify WPS users with priority. For SET instance, if Set WPS user Bit Field NbmWpsAlg WPSALGO(Opt priorities 3, 4, 5, priority Type orithmPriority ional) and 6 are selected, users with priorities are regarded as WPS users.
PRIORITY 1(WPS USER PRIORITY 1), PRIORITY 2(WPS USER PRIORITY 2), PRIORITY 3(WPS USER PRIORITY 3), PRIORITY 4(WPS USER PRIORITY 4), PRIORITY 5(WPS USER PRIORITY 5), PRIORITY 6(WPS USER PRIORITY 6), PRIORITY
PRIORITY 1, PRIORITY 2, PRIORITY 3, PRIORITY 4, PRIORITY 5, PRIORITY 6, PRIORITY 7, PRIORITY 8, PRIORITY 9, PRIORITY 10, PRIORITY 11, PRIORITY 12, PRIORITY 13, PRIORITY 14,
WPS (Wireless Priority Service) is NS/EP (National Security/Emergen ALGORIT cy Preparedness) HM_OFF( AMR WPS conversation Algorithm SET service controlled Switch WPSALGO(Opt by White House Enumeratio OFF), ional) of USA. NCS is n Type ALGORIT authorized to HM_ON(W manage the PS execution of the Algorithm WPS project. Switch ON) This switch indicates whether the WPS function is supported.
8/7/2013
6473267
162734118.xls.ms_office1
When the RRC REQ total number NodeB Call SET of one NodeB NBTotalRrcN Shock Trigger CALLSHOCKC reach this umThd Threshold TRL(Optional) threshold the RRC flow control will be triggered. This parameter specifies the transport type of the NodeB. ATMTRANS_IP indicates the ATM transport ADD NodeB type, NBTRANTP NODEBIP(Man TransType IPTRANS_IP datory) indicates the IP transport type, and ATMANDIPTRA NS_IP indicates the ATM and IP transport types.
Interval Type
1~200
1~200
NCC
Uniquely ADD identifying the Network color Interval GSMCELL(Ma different network code Type ndatory) in the neighboring area.
0~7
0~7
ADD INTERFREQN CELL(Mandato Uniquely Neighboring ry) NCellId identifying a cell ID ADD neighboring cell. INTRAFREQN CELL(Mandato ry) The cell will shut down automatically Cell Dynamic ADD only when the ShutDown CELLDYNSHU neighboring cell NCellLdrRem Neighbour Cell TDOWN(Optio load is less than ainThd Load Remain nal) the difference threshold between the LDR threshold and this threshold.
Interval Type
0~65535
0~65535
Interval Type
0~100
0~1, step:0.01
8/7/2013
6483267
162734118.xls.ms_office1
ADD INTRAFREQN CELL(Mandato ry) ADD INTERFREQN CELL(Mandato ry)
NCellRncId
ID of the RNC controlling a neighboring cell. Interval Uniquely Type identifying an RNC.
0~4095
0~4095
NcMode
ADD Indicating the Network GSMCELL(Opt network control Control Mode ional) mode.
When the number of UEs responding to counting/recounti ng is greater than or equal to this threshold, the PTM mode is applied to data transmission. Otherwise, the PTP mode is used. Note that the number of UEs includes the number of Interval connected mode Type UEs. A larger value of this parameter leads to a higher probability of using PTP transmission on the network. Power control is available for PTP transmission, and thus the power consumption in PTP mode is lower than that in
2~10
2~10
8/7/2013
6493267
162734118.xls.ms_office1
When this parameter is set to ON, and when the load of the GSM cell exceeds the related threshold, the RNC will stop the non-coverage based inter-RAT handover; when this parameter is set to OFF, the RNC will do reversely. This SET parameter NCOV Reloc INTERRATHO determines Ind based on NCOV(Optional whether to stop GSM cell load ) the non-coverage based handover from the UMTS network to the GSM network according to the load information of the GSM cell. When the GSM network can provide its load information to the UMTS network, the RNC determines Maximum number of nonHCS cell reselection. This parameter, along with ADD Tcrmaxnonhcs, Non-HCS CELLSELRES defines the speed NCR EL(Optional) estimation threshold of nonHCS cells. For detailed inforamtion, refer to 3GPP TS 25.304.
NcovHoOn2 GldInd
OFF, ON
Ncrnonhcs
Interval Type
1~16
1~16
Indicating NO(NO_DI ADD whether the DSP RECT_CO NEIGHBOR Adjacent flag N7DPC(Option and the OSP are Enumeratio NNECT), NO, YES al) connected directly n Type YES(DIRE or indirectly. CT_CONN ECT)
8/7/2013
6503267
162734118.xls.ms_office1
NEXTHOP
This parameter ADD Forward route specifies the IP BAMIPRT(Man address address of the datory) next hop.
IP Address Type
NEXTHOP
IP Address Type
0.0.0.0~255 .255.255.25 5
8/7/2013
6513267
162734118.xls.ms_office1
Threshold for deciding that the UE is in highmobility state. This parameter specifies a threshold for highspeed decision. After the UE reports event 1D, ADD the UE is CELLHCSHO( Threshold for considered in Optional) Interval NFastSpdEst UE fast speed high-mobility SET Type decision state if the HCSHO(Option number of al) changes of the best cell during [TFASTSPDEST ] is larger than [NFASTSPDEST ]. The smaller the value is, the more possibly the UE is decided in highmobility state.
1~16
1~16
NI
Network ID
Internationa l Network Network Code, Indicator. Internationa INT(international l Standby network), ADD INT, INTB, Network INTB(internation OPC(Mandatory Enumeratio NAT, Code, al reserved), ) n Type NATB National NAT(national Network network), Code, NATB(national National reserved). Standby Network Code
8/7/2013
6523267
162734118.xls.ms_office1
This parameter defines the of successive insync indications required for the NodeB to trigger the radio link recovery process.The radio link set remains in the initial state until it has received a certain number (the number is defined ADD by NInsyncInd) of Interval CELLSETUP(O successive inType ptional) sync indications from L1, and then the NodeB triggers the radio link recovery process, which indicates that the radio link set has been synchronized. Once the radio link recovery process is triggered, the radio link set is
NInsyncInd
1~256
1~256
8/7/2013
6533267
162734118.xls.ms_office1
NMO
This parameter should be set according to the actual network situation . If there is the Gs interface between SGSN ADD Network mode and MSC/VLR MODE1, CNDOMAIN(O Enumeratio of operation this parameter is MODE2 ptional) n Type set as MODE1; otherwise, MODE2. It is valid only when [CN domain ID] is set as PS_DOMAIN.
MODE1,M ODE2
8/7/2013
6543267
162734118.xls.ms_office1
NNSfTmr
Timer NNSF
This parameter specifies the value of the NAS Node Selection Function (NNSF) timer for CS traffic paging. For the IMSI paging of the UE in CS connection mode, SET on receiving the OPERATORCF IMSI paging with Interval GPARA(Option the first Global Type al) CN ID, the RNC stores the Global CN ID and starts the NNSF protection timer. Once the UE responds to the IMSI paging, the RNC stops the NNSF protection timer.
0~60
0~60
This parameter specifies the STR number of the Interval NODEBBWRP cabinet where the Type T(Mandatory) NodeB is installed. Maximum number of HSDPA users of the NodeB. If the HSDPA user ADD access is rejected NODEBALGO Interval by the NodeB, PARA(Optional Type you can infer that ) the HSDPA licenses are insufficient. New HSDPA licenses are required.
0~3840
0~3840
8/7/2013
6553267
162734118.xls.ms_office1
Maximum number of HSUPA users of the NodeB. If the HSUPA user ADD access is rejected NODEBALGO Interval by the NodeB, PARA(Optional Type you can infer that ) the HSUPA licenses are insufficient. New HSUPA licenses are required.
0~3840
0~3840
NodeBId
NodeB ID
ADD NODEB(Manda tory) ADD ADJNODE(Ma ndatory) ADD NODEBIP(Man NodeB ID. datory) ADD NODEBESN(M andatory) STR NODEBDETE CT(Mandatory)
Interval Type
0~65535
0~65535
This parameter STR specifies the Interval NODEBBWRP number of an Type T(Mandatory) IMA group of the NodeB.
0~3
0 to 3
8/7/2013
6563267
162734118.xls.ms_office1
IUB_LDR (Iub congestion control algorithm): When the NodeB Iub load is heavy, users are assembled in priority order among all the NodeBs and some users are selected for LDR action (such as BE ADD service rate NODEBALGO reduction) in Bit Field PARA(Optional order to reduce Type ) the NodeB Iub load. NODEB_CREDI T_LDR (NodeB level credit congestion control algorithm): When the NodeB level credit load is heavy, users are assembled in priority order among all the NodeBs and some
IUB_LDR(I UB LDR Algorithm), NODEB_C REDIT_LD R(NodeB Credit LDR Algorithm), LCG_CRE DIT_LDR( LCG Credit LDR Algorithm), IUB_OLC(I UB OLC Algorithm)
8/7/2013
6573267
162734118.xls.ms_office1
ADD NODEB(Manda tory) ADD NBNODESYN CMONPARA( Mandatory) ADD LOCELL(Mand atory) ADD CELLSETUP( Mandatory) ADD QUICKCELLS ETUP(Mandato Name of the ry) NodeB. ADD NODEBLDR( Mandatory) ADD NODEBALGO PARA(Mandato ry) ADD IPDL(Mandator y) ADD NCP(Mandatory ) ADD CCP(Mandatory
String Type -
1~64 characters
8/7/2013
6583267
162734118.xls.ms_office1
ADD Protocol version R99, R4, R99, R4, NODEB(Option Enumeratio of the NodeB. R5, R6, R7 R5, R6, R7 al) n Type
NODEBRPT PERIOD
NODEBRPT TYPE
This parameter specifies the STR period of Report period NODEBBWRP reporting the T(Optional) NodeB bandwidth, in minutes. This parameter specifies the type of reporting the NodeB bandwidth. "PERIOD" indicates the STR periodical report Report type NODEBBWRP type. "EVENT" T(Optional) indicates the event-based report type, for example, the report triggered by bandwidth change.
Interval Type
1~60
1 to 60
PERIOD,E VENT
8/7/2013
6593267
162734118.xls.ms_office1
NODEBSN
This parameter specifies the STR number of the slot Interval NODEBBWRP where the port of Type T(Mandatory) the NodeB is located. This parameter specifies the STR number of the Interval NODEBBWRP subrack where the Type T(Mandatory) NodeB is installed.
NODEBSRN
0~2
0 to 2
This parameter STR BASE_BO NodeB specifies the type BASE_BO NODEBSUB NODEBBWRP Enumeratio ARD, Subboard type of a sub-board of ARD,CH_S BRDTYPE T(Mandatory) n Type CH_STM1, the NodeB. TM1,E1 E1
NodeBType
NodeB Type
NORMAL( Normal), PICO_TYP Enumeratio E1(Pico n Type type 1), PICO_TYP E2(Pico type 2)
ADD Measurement NBNODESYN Period of node NodeSyncPeri period CMONPARA( synchronization. od Mandatory)
Interval Type
1~288
5~1440, step:5
NodeSyncTi me
ADD Measurement Measurement NBNODESYN start time start time CMONPARA( (HH:MM:SS). Mandatory)
00:00:00~2 3:59:59
8/7/2013
6603267
162734118.xls.ms_office1
NODET
UNI_AAL2SWIT CH is the IUB, IUR, adjacent node of IUCS, the ATM switch ADD IUPS, on the Iub ADJNODE(Ma interface. Enumeratio UNI_AAL2 ndatory) SWITCH, NNI_AAL2SWIT n Type NNI_AAL2 CH is the SWITCH adjacent node of the ATM switch on the Iur or IuCS interface. ADD NODEBLMTP ARA(Mandator y) This parameter PICO_TYP specifies the Enumeratio E1, small-scaled base n Type PICO_TYP station type. E2
NodeType
NonhcsInd
Non-HCS indicator
Indicating whether the nonADD CONFIGU CONFIGU HCS speed CELLSELRES Enumeratio RED, RED, estimation EL(Optional) n Type NOT_CON NOT_CON parameter should FIGURED FIGURED be configured.
8/7/2013
6613267
162734118.xls.ms_office1
This parameter specifies the ratio of the non-serving E-DCH RX power to the total E-DCH RX power. The parameter indicates whether a non-serving NodeB sends the relative grant (RG) message to the UE. If the Target Nonparameter value is serving EADD NonServToTo set too low, the Interval DCH to Total CELLHSUPA( talEdchPwrRa power of the non- Type E-DCH Power Optional) tio serving radio link ratio will be low and the data rate on non-serving EDCH will be reduced, thus impacting the transport rate of the UE in soft handover state. If the parameter value is too high, the non-serving RL cannot send RG to the UE
0~100
0~1, step:0.01
8/7/2013
6623267
162734118.xls.ms_office1
This parameter defines the of successive insync indications required for starting the radio link failure timer. When the radio link set is in the synchronized state, the NodeB starts the timer after it receives successive out-ofsync indications Num of ADD of the number Interval NOutsyncInd continuous out CELLSETUP(O defined by Type of sync ind ptional) NOutsyncInd.The NodeB shall stop and reset the timer after receiving successive insync indications of the number defined by NInsyncInd.When the timer expires, the NodeB triggers the radio link failure process, and
1~256
1~256
8/7/2013
6633267
162734118.xls.ms_office1
NPrio
Priority of neighboring cells. The priority that corresponds to the neighboring cell is valid only when the this parameter is set to TRUE. ADD The lower the INTERFREQN priority, the easier CELL(Mandato it is for the The priority of Interval ry) neighboring cell neighbor cell Type ADD to be delivered as GSMNCELL(M the measurement andatory) object. For example, it is more possible for a neighboring cell of priority 1 than a cell of priority 2 to be delivered as the measurement object. Priority of neighboring cells. The priority that corresponds to the neighboring cell is valid only when the this parameter is set to TRUE. The lower the priority, the easier ADD it is for the The priority of INTRAFREQN Interval neighboring cell neighbor cell CELL(Mandato Type to be delivered as ry) the measurement object. For example, it is more possible for a neighboring cell of priority 1 than a cell of priority 2 to be delivered as the measurement object.
0~63
0~63
NPrio
0~30
0~30
8/7/2013
6643267
162734118.xls.ms_office1
Priority identifier of neighboring cells. TRUE indicates that the neighboring cell priority is valid in the algorithm of neighboring cell combination. FALSE indicates FALSE, that the Enumeratio TRUE neighboring cell n Type priority is invalid, and, in the algorithm of neighboring cell combination, the cell with invalid priority is the last one to be considered as the measurement object.
NPrioFlag
ADD INTERFREQN CELL(Optional) ADD The flag of the INTRAFREQN priority CELL(Optional) ADD GSMNCELL(O ptional)
FALSE,TR UE
8/7/2013
6653267
162734118.xls.ms_office1
This parameter specifies the NPTP-PTM offset. During recounting in PTP mode, if the number of PTP users is larger than or equal to NPTP-PTM, the transmission mode transits to PTM. The value of NPTP-PTM = [PARA]Ncountin gThd[/PARA] + [PARA]NPtpToP tmOffset[/PARA] . The transition between PTP and PTM affects user experience. Thus, to minimize pingpong effect, the transition between PTP and PTM uses a threshold other than [PARA]Ncountin gThd[/PARA]. The two Identifying a Network resourse . 1. The NRI numbers of CS domain and PS domain are independent from each other. 2. If multiple pool areas overlap, the NRI uniquely identify all the CN nodes connected to it. 3. A CN node can have multiple NRIs. In one pool area, however, an NRI can only correspond to one CN node.
Interval Type
1~5
1~5
NRI
Interval Type
0~1023
0~1023
8/7/2013
6663267
162734118.xls.ms_office1
ADD NRNC(Mandat ory) ADD NRNCURA(Ma ndatory) Neighboring Interval ADD RNC ID. Type NRNCCELL(M andatory) ADD RNCPOOLME MBER(Mandat ory) Source ATM address. It should be input in hexadecimal format with prefix of "H'". 1.The first byte of it is recommended to started with H'45 (indicating E.164 address), H'39 (indicating DCC address) or H'47 (indicating ICD ADD address). When it RNCBASIC(M Any Type is started with andatory) "H'45", the following seven and a half octets must be BCD code, called E.164e when the last part DSP is full of zero, such as 0x450009715002 02001F00000000 00000000000000, while called E.164A when the last part DSP is
NRncId
Neighboring RNC ID
0~4095
0~4095
NSAP
ATM address
8/7/2013
6673267
162734118.xls.ms_office1
Destination ATM address of the AAL2 route. It must be input in hexadecimal format within 2 and 21 bytes including the prefix H'(H'is 1 byte). It is recommended that the first byte is H'45 (indicating an E.164 address), H'39 (indicating a Any Type DCC address), or H'47 (indicating an ICD address). If the first byte is H'45, then the following seven and a half bytes (that is, 15 digits) must be a BCD code. If the following part, called DSP, are all zeros, this address is called E.164e, for example, Threshold for deciding whether the UE in lowmobility state. After the slow speed timer times out, the UE is considered in lowmobility state if the number of changes of the Interval best cell caused Type by the UE reporting of event 1D during [TSLOWSPDES T] is smaller than [NSLOWSPDES T]. The larger the value is, the more possibly the UE is decided in lowmobility state.
NSAP
None
ADD CELLHCSHO( Threshold for Optional) UE slow speed NSlowSpdEst SET decision HCSHO(Option al)
1~16
1~16
8/7/2013
6683267
162734118.xls.ms_office1
NullNRI
NullNRI VALUE
NullNRI VALUE indicate SET that ue assign OPERATORCF Interval load other CN GPARA(Option Type node ,when al) NNSF select CN node.
0~1023
0~1023
8/7/2013
6693267
162734118.xls.ms_office1
Specifies the number of access classes that are restricted at a Interval time according to Type the flexible polling restriction mode.
1~16
1~16
ADD PPPLNK(Optio nal) SET ETHPORT(Opti onal) ADD MPGRP(Option al) ADD IPLOGICPORT (Optional)
Interval Type
0~100
0%~100%
8/7/2013
6703267
162734118.xls.ms_office1
This parameter specifies the DSCP value of the OAM flow. The data of the Interval OAM flow enters Type a dedicated queue for transmission rather than queues 1 to 6.
0~63
0 to 63
OAMMINB WKEY
This parameter OAM flow SET specifies the min bandwidth QUEUEMAP(O minimum OAM switch ptional) flow bandwidth switch.
OFF,ON
Offset of Qoffset1 when neighboring cell load is heavier than that of the center cell (Note: Qoffset1 is used ADD as a priority to Interval CELLPUC(Opti decide which cell Type onal) will be selected in cell selection or reselection). For detailed information of this parameter, refer to 3GPP TS 25.304.
-20~20
-20~20
8/7/2013
6713267
162734118.xls.ms_office1
Offset of Qoffset1 when neighboring cell load is lighter than that of the center cell (Note: Qoffset1 is used ADD as a priority to CELLPUC(Opti decide which cell onal) will be selected in cell selection or reselection). For detailed information of this parameter, refer to 3GPP TS 25.304. Offset of Qoffset2 when neighboring cell load is heavier than that of the center cell (Note: Qoffset2 is used ADD as a priority to CELLPUC(Opti decide which cell onal) will be selected in cell selection or reselection). For detailed information of this parameter, refer to 3GPP TS 25.304. Offset of Qoffset2 when neighboring cell load is lighter than that of the center cell (Note: Qoffset2 is used ADD as a priority to CELLPUC(Opti decide which cell onal) will be selected in cell selection or reselection). For detailed information of this parameter, refer to 3GPP TS 25.304.
Interval Type
-20~20
-20~20
Interval Type
-20~20
-20~20
Interval Type
-20~20
-20~20
8/7/2013
6723267
162734118.xls.ms_office1
Offset of Sintersearch when center cell load level is "Heavy" (Note: Sintersearch is used to decide ADD whether to start CELLPUC(Opti the interonal) frequency cell reselection). For detailed information of this parameter, refer to 3GPP TS 25.304. Offset of Sintersearch when center cell load level is "Light" (Note: Sintersearch is used to decide ADD whether to start CELLPUC(Opti the interonal) frequency cell reselection). For detailed information of this parameter, refer to 3GPP TS 25.304.
Interval Type
-10~10
20~20,step: 2
Interval Type
-10~10
-20~20, step:2
8/7/2013
6733267
162734118.xls.ms_office1
Identifying the period of the OLC execution. When overload occurs, execution of OLC can dynamically reduce the cell load. When setting the parameter, consider the hysteresis for SET which the load LDCPERIOD( monitoring Optional) responds to the Interval SET load change. For Type SATLDCPERI example, when OD(Optional) the layer 3 filter coefficient is 6, the hysteresis for which the load measurement responds to the step-function signals is about 2.8s, namely that the system can trace the load control effect about 3 s later after each load
8/7/2013
6743267
162734118.xls.ms_office1
Identity Operator Type,as follows: Primary Operator: Control whether the RAN support some funtion feature and distribute seconder operator's license. Second Operator: the RAN that is controled by primary operator support some ADD funtion feature Operator Type CNOPERATO OperatorType and license. R(Mandatory) Outer Operator: Operator which don't include the Primary , Second operator of the source rnc handover the target RNC to support the mobiling . Common Operator: Common Operator indicate PLMN ID the This parameter specifies the type of transport Opposite channel at the ADD direction peer end for the OppositeTrch TYPRABRLC( transport typical RAB. For Type Mandatory) channel type CS services, this parameter must be set to TRCH_DCH.
PRIM(Prim ary Operator), SEC(Secon dary PRIM,SEC, Enumeratio Operator), OUTER,CO n Type OUTER(Ou MM ter Operator), COMM(Co mmon Operator)
8/7/2013
6753267
162734118.xls.ms_office1
MAP_MOD E_LUCEN This parameter T, SET specifies the map Map mode of MAP_MOD OPTDS1MA COPTLNK(Opt mode between the Enumeratio opt and DS1 E_HUAWE PMODE ional) optical port and n Type I, the DS1. MAP_MOD E_ALCAT EL
This parameter SET specifies whether Bit Field SMLC(Optional the IE is reported Type ) to the CN.
OPTM
This parameter SET specifies the type SDH, Enumeratio OPT(Optional) of the optical SONET n Type port.
SDH, SONET
Azimuth of the semi-major axis of an uncertain Cell Center ADD area in the cell OrientOfMajo Orientation Of SMLCCELL(M center (the rAxis Major Axis andatory) anticlockwise angle from the semi-major axis
Interval Type
0~179
0~179
8/7/2013
6763267
162734118.xls.ms_office1
This parameter specifies the operation type of this command. One_touch One_touch One_touch( indicates that this (for all the For all the command is subracks LOD subracks executed on all and boards), Operation type PATCH(Option Enumeratio and boards), boards in all Step_by_Ste al) n Type Step_by_Ste subracks. p (choose p(Choose Step_by_Step step by step by indicates that this step) step) command is executed on the specified patch of a board.
OT
OTDOA ADD Flag of OTDOA OtdoaActivat Method Active SMLCCELL(O location Enumeratio INACTIVE, INACTIVE, eFlag Flag ptional) activation. n Type ACTIVE ACTIVE
UE positioning UE_BASE UE_BASE mode when the D, D, OTDOA method UE_ASSIS UE_ASSIS SET is selected. The TED, TED, SMLC(Optional UE supports both Enumeratio UE_BASE UE_BASE ) UE-based n Type D_PREFER D_PREFER OTDOA mode RED, RED, and UE-assisted UE_ASSIS UE_ASSIS OTDOA mode. TED_PREF TED_PREF ERRED ERRED
8/7/2013
6773267
162734118.xls.ms_office1
Mobility flag of the overlay network. This flag is valid when the OVERLAY switch is set to ON. When the flag is set to NOT_FORBIDD EN, this means that, when using the H service, the UE can deliver the intraADD FORBIDDE frequency FORBIDDE NRNCCELL(O Enumeratio N, measurement and N,NOT_FO ptional) n Type NOT_FOR handover to the RBIDDEN BIDDEN DRNC cell, which can be used as the target cell of interfrequency handover. When the flag is set to FORBIDDEN, this means that, when using the H service, the UE cannot deliver the intra-frequency measurement and
ADD Ownership of the PEER, AAL2PATH(O Enumeratio AAL2 Path. LOCAL ptional) n Type
PEER, LOCAL
Indicating NO(ATM_ whether the ADDRESS destination ATM _DOES_N address is the OT_BELO adjacent node NG_TO_T ADD specified by HIS_ADJA AAL2RT(Optio [ANI]. If the two Enumeratio NO,YES CENT_NO nal) nodes are the n Type DE), same, set this YES(ATM_ parameter to ADDRESS YES. If they are _BELONG different, set this S_TO_THI parameter to NO. S_ADJACE
8/7/2013
6783267
162734118.xls.ms_office1
For IUPS Path,this parameter must be ENABLED.Other Paths have ADD IP Path check default value IPPATH(Option Enumeratio ENABLED, ENABLED, flag DISABLED.If al) n Type DISABLED DISABLED this parameter is set to ENABLED,then [Check IP address] must be specified.
PATHCHK
PATHID
ADD AAL2PATH(M andatory) ACT AAL2 Path ID VCLCC(Manda tory) LOP VCL(Mandator y)
Identifying an AAL2 path between two AAL2 nodes. For the same AAL2 Interval path, the path IDs Type configured in the two AAL2 nodes must be the same and cannot be 0.
PATHID
IP Path ID
ADD IPPATH(Manda tory) ACT Identifying an IP Interval IPPM(Mandator path. Type y) ADD IPPATHBIND( Mandatory)
0~65535
0~65535
8/7/2013
6793267
162734118.xls.ms_office1
QOS, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQ_QOS, Enumeratio LQ_BE, n Type LQ_AF11, LQ_AF12, LQ_AF13, LQ_AF21, LQ_AF22, LQ_AF23, LQ_AF31, LQ_AF32, LQ_AF33, LQ_AF41, LQ_AF42, LQ_AF43, LQ_EF QOS, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, QOS, LQ_BE, LQ_AF11, LQ_AF12, LQ_AF13, LQ_AF21, LQ_AF22, LQ_AF23, LQ_AF31, LQ_AF32, LQ_AF33, LQ_AF41, LQ_AF42, LQ_AF43, LQ_EF
PATHT
IP path type
PATTYPE
Patch Type.
This parameter LOD specifies the type PATCH(Manda of patch to be Enumeratio NP, DSP tory) loaded to the n Type DPUb board.
NP,DSP
8/7/2013
6803267
162734118.xls.ms_office1
Offset of the PCH transmit power from the PCPICH transmit power in a cell. If the value is set too small, the UEs on the cell edge cannot receive the paging message properly. This problem affects the coverage of the downlink ADD common channel Interval PCH(Optional) and furthermore Type the coverage of the cell. If the value is set too great, it causes interference to other channels, occupies the downlink transmit power, and affects the cell capacity. For detailed information of this parameter, refer to 3GPP TS
PCHPower
PCH power
-350~150
8/7/2013
6813267
162734118.xls.ms_office1
TX power of the PCPICH in a cell. This parameter should be set based on the actual system environment such as cell coverage (radius) and geographical environment. For the cells to be covered, the ADD downlink PCPICH(Option coverage should PCPICH al) be guaranteed as Interval PCPICHPowe transmit power ADD a premise. For the Type r QUICKCELLS cells requiring ETUP(Optional) soft handover area, this parameter should satisfy the proportion of soft handover areas stipulated in the network planning. If the maximum transmit power of the PCPICH is configured too large, the cell capacity will be
-100~500
8/7/2013
6823267
162734118.xls.ms_office1
Pilot power adjustment step increased or decreased in each increase of the cell breathing algorithm or decrease of cell pilot. If the value is too great, the cell pilot may change fiercely, which is easy to lead to user call ADD drops. If the value Interval CELLLDB(Opti is too small, the Type onal) cell pilot may change smoothly. However, the response speed of the cell breathing algorithm is decreased, impacting the algorithm performance. For detailed information of this parameter, refer to 3GPP TS 25.433.
0~100
0~10, step:0.1
8/7/2013
6833267
162734118.xls.ms_office1
This parameter specifies the peak rate. 1. Physical unit: cell/s or kbit/s 2. The peak rate cannot exceed the maximum bandwidth of the bearer such as the IMA group, UNI link, or optical ADD Interval port. Peak cell rate ATMTRF(Opti 3. The peak rates Type onal) for different types of services are as follows: CBR: 71 to 353207 (UT = CELL/S)/30 149759 (UT = KBIT/S); RTVBR/NRTVB R/UBR: 71 to 70754 (UT = CELL/S)/30 30000 (UT =
PCR
30~353207
30 to 353207
8/7/2013
6843267
162734118.xls.ms_office1
Power control switch. 1) PC_AMR_MOD E_INDUCE_BLE R_ALTER_SWIT CH: When the switch is on, the target BLER value of the AMR speech service is the target BLER value of each mode in the SET AMRC parameter Power control CORRMALGO table. When the Bit Field switch SWITCH(Optio switch is not on, Type nal) the target BLER value of the AMR speech service is the target BLER value specified in TYPRAB. 2) PC_DL_INNER_ LOOP_PC_ACTI VE_SWITCH: When the switch is on, the status of inner loop DL power control is set to "Active."
PcSwitch
PC_AMR_ MODE_IN DUCE_BL ER_ALTER _SWITCH, PC_DL_IN NER_LOO P_PC_ACT IVE_SWIT CH, PC_DOWN LINK_PO WER_BAL ANCE_SW ITCH, PC_EFACH _ECN0_DY N_ADJ_S WITCH, PC_FP_MU LTI_RLS_I ND_SWIT CH, PC_HSUPA _HARQNU M_AUTO_ ADJUST_S WITCH, PC_HSUPA _PO_UPDA TE_SWITC
PC_AMR_ MODE_IN DUCE_BL ER_ALTER _SWITCH, PC_DL_IN NER_LOO P_PC_ACT IVE_SWIT CH, PC_DOWN LINK_PO WER_BAL ANCE_SW ITCH, PC_EFACH _ECN0_DY N_ADJ_S WITCH, PC_FP_MU LTI_RLS_I ND_SWIT CH, PC_HSUPA _HARQNU M_AUTO_ ADJUST_S WITCH, PC_HSUPA _PO_UPDA TE_SWITC
Interval Type
1~10
1~10
PDUPrid
This parameter ACT specifies the 10, 20, 50, 10,20,50,10 ETHOAMAH( period of sending Enumeratio 100, 200, 0,200,500,1 Optional) EthOAM PDU n Type 500, 1000 000 packets.
PDUSize
This parameter specifies the ACT length of an PDU Pkt Len ETHOAMAH( EthOAM PDU Optional) packet.
Interval Type
64~1024
64 to 1025
8/7/2013
6853267
162734118.xls.ms_office1
Indicating the corresponding peer cell ID of the Interval cell in a Type RNCPOOL in RNC Node Redundancy function.
PeerCellId
Peer Cell ID
0~65535
0~65535
PEERIP
Peer IP address
ADD This parameter IP Address PPPLNK(Mand specifies the peer Type atory) IP address.
0.0.0.0~255 .255.255.25 5
PEERIP
Peer IP address
This parameter ADD specifies the peer IP Address MPGRP(Manda IP address for the Type tory) MLPPP group.
0.0.0.0~255 .255.255.25 5
PEERIP
Peer IP
This parameter STR specifies the IP Address IPLOPTST(Ma destination IP Type ndatory) address of the IP loopback test.
0.0.0.0~255 .255.255.25 5
PEERIP1
First destination ADD IP address. 0 IP Address SCTPLNK(Man indicates an Type datory) invalid value.
0.0.0.0~255 .255.255.25 5
8/7/2013
6863267
162734118.xls.ms_office1
PEERIP2
IP Address Type
0.0.0.0~255 .255.255.25 5
ADD IPOAPVC(Man datory) LOP This parameter IP Address VCL(Mandator specifies the peer Type y) IP address. ACT VCLCC(Manda tory)
0.0.0.0~255 .255.255.25 5
8/7/2013
6873267
162734118.xls.ms_office1
Peer IP address. This parameter ADD cannot be equal to IP Address IPPATH(Manda the local IP Type tory) address configured in the RNC.
0.0.0.0~255 .255.255.25 5
PeerIsValid
ADD QUICKCELLS Indicating peer ETUP(Optional) cell is valid or ADD not. CELLSETUP(O ptional)
8/7/2013
6883267
162734118.xls.ms_office1
PEERMASK
IP Address Type
0.0.0.0~255 .255.255.25 5
PeerNodebId
Peer NodeB ID
This parameter specifies the NodeB ID configured in another RNC of the RNC POOL. ADD In RNC Node Interval NODEB(Manda Redundancy Type tory) function, the two RNCs form an RNC POOL and the same physical NodeB is configured in both RNCs.
0~65535
0~65535
PEERPN
ADD Destination Destination port Interval SCTPLNK(Man SCTP port No. of the SCTP link. Type datory)
1024~6553 1024~6553 5 5
PeerRncId
This parameter ADD specifies the RNC Interval Peer RNC ID NODEB(Manda ID of the peer Type tory) RNC in the RNC POOL.
0~4095
0~4095
8/7/2013
6893267
162734118.xls.ms_office1
PEERT
Peer type
This parameter ADD specifies the peer IUB, IUPS, IUB, IUPS, IPOAPVC(Man Enumeratio type of IPoA OTHER OTHER datory) n Type PVC.
ADD CELLINTERR ATHOCOV(Op tional) ADD CELLINTERR Inter-Rat HO ATHONCOV( physical PenaltyTimeF Optional) channel failure orPhyChFail SET penalty timer INTERRATHO COV(Optional) SET INTERRATHO NCOV(Optional )
The length of the penalty timer of Inter-Rat handover failure due to physical channel failure. No try of InterInterval Rat handover will Type be taken until penalty finishes. Also see parameter InterRatPhyChFai lNum.
0~65535
0~65535
Strech for penalty of interRAT handover ADD failure. No try of CELLMBDRIN Interval inter-RAT TERRAT(Optio Type handover to the nal) penalty cell will be taken until penalty finishes.
0~300
0~300
8/7/2013
6903267
162734118.xls.ms_office1
This parameter specifies the pending-timeafter-trigger for traffic-related event 4A on DCH. The trafficrelated event 4A on DCH is not reported again during the time defined by this parameter after D250, such an event is D500, reported. This ADD D1000, Pending time parameter is set to PendingTime TYPRABDCC Enumeratio D2000, after trigger 4A avoid too many 4A CMC(Optional) n Type D4000, channel D8000, reconfiguration D16000 operations. The larger the value of this parameter, the longer the time from the last reporting of traffic-related event 4A on DCH to the next reporting, and the smaller the possibility of triggering traffic-
8/7/2013
6913267
162734118.xls.ms_office1
This parameter specifies the pending-timeafter-trigger for traffic-related event 4B on DCH. The trafficrelated event 4B on DCH is not reported again during the time defined by this parameter after D250, such an event is D500, reported. This ADD D1000, Pending time parameter is set to PendingTime TYPRABDCC Enumeratio D2000, after trigger 4B avoid too many 4B CMC(Optional) n Type D4000, channel D8000, reconfiguration D16000 operations. The larger the value of this parameter, the longer the time from the last reporting of traffic-related event 4B on DCH to the next reporting, and the smaller the possibility of triggering traffic-
This parameter specifies the number of pending periods ADD after event A is Interval TYPRABRLC( triggered. During Type Optional) the pending time, no event related to retransmission ratio is reported.
0~1000
0~1000
8/7/2013
6923267
162734118.xls.ms_office1
This parameter specifies the number of pending periods ADD after event B is Interval TYPRABRLC( triggered. During Type Optional) the pending time, no event related to retransmission ratio is reported.
0~1000
0~1000
PERIOD
Interval Type
1~60
1~60
8/7/2013
6933267
162734118.xls.ms_office1
ADD CELLINTERFR EQHOCOV(Op 2B event retry tional) PeriodFor2B period SET INTERFREQH OCOV(Optional )
2B event retry period. This parameter defines the length of the event 2B retry period. The smaller the value of this parameter, the more frequent the handover retry due to interfrequency handover failure, and the faster the Interval UE to be Type successfully handed over to the target cell whose load is restored, thus lowering the probability of call drops. In this case, however, frequent handover retry brings more load to the RNC system.
1~64
500~32000, Step:500
8/7/2013
6943267
162734118.xls.ms_office1
Retry period for the event 2C. This parameter defines the length of the event 2C retry period. The smaller the value of this parameter, the ADD more frequent the CELLINTERFR handover retry EQHONCOV( due to inter2C event retry Optional) frequency Interval PeriodFor2C period SET handover failure, Type INTERFREQH and the faster the ONCOV(Option UE to be al) successfully handed over to the target cell whose load is restored. In this case, however, frequent handover retry brings more load to the RNC system. Retry period for the event 3A. This parameter defines the length of the event 3A retry period. The smaller the value of this parameter, the more frequent the handover retry due to inter-RAT handover failure, and the faster the Interval UE to be Type successfully handed over to the target cell whose load is restored, thus lowering the probability of call drops. In this case, however, frequent handover retry brings more load to the RNC system.
1~64
500~32000, Step:500
ADD CELLINTERR ATHOCOV(Op 3A event retry PeriodFor3A tional) period SET INTERRATHO COV(Optional)
1~64
500~32000, Step:500
8/7/2013
6953267
162734118.xls.ms_office1
Retry period for the event 3C. This parameter defines the length of the event 3C retry period. The smaller the value of this parameter, the more frequent the handover retry ADD due to inter-RAT CELLINTERR handover failure, ATHONCOV( and the faster the 3C event retry Optional) Interval PeriodFor3C UE to be period SET Type successfully INTERRATHO handed over to NCOV(Optional the target cell ) whose load is restored, thus lowering the probability of call drops. In this case, however, frequent handover retry brings more load to the RNC system. This parameter specifies the number of reporting times of event 1A for periodical reporting. When the actual reporting times exceeds the set value, the periodical reporting ends. This parameter specifies the number of reporting times of event 1C for periodical reporting. When the actual reporting times exceeds the set value, the periodical reporting ends.
1~64
500~32000, Step:500
D1, D2, D4, D8, Enumeratio D16, D32, n Type D64, INFINITY
D1, D2, D4, D8, Enumeratio D16, D32, n Type D64, INFINITY
8/7/2013
6963267
162734118.xls.ms_office1
This parameter specifies the number of reporting times of event 1J for periodical reporting. When the actual reporting times exceeds the set value, the periodical reporting ends. Period common measurement protection timer coefficient. Timer length of common measurement report protection = max (10000, this parameter x common measurement report period). The unit is ms. The common measurement report protection timer indicates the maximum length between two valid common measurement reports. If the real time exceeds the timer length of common measurement report protection, the common measurement is faulty and a new one is set up. For
D1, D2, D4, D8, Enumeratio D16, D32, n Type D64, INFINITY
Interval Type
2~65535
2~65535
8/7/2013
6973267
162734118.xls.ms_office1
It is used to calculate the corresponding dynamic persist scaling factor for D0.9, D0.8, ASC2~ASC7. It ADD 0.9, 0.8, Persist Scaling D0.7, D0.6, is valid for ASC2PersistScaling PRACHASC(M Enumeratio 0.7, 0.6, 0.5, Factor D0.5, D0.4, ASC7 only and Factor andatory) n Type 0.4, 0.3, 0.2 D0.3, D0.2 mandatory. For detailed information of this parameter, refer to 3GPP TS 25.214. Disable(Not support Protocol field compress), Enable(Sup port Protocol field compress)
PFC
This parameter ADD specifies whether PPPLNK(Optio to enable the Protocol field nal) Disable, protocol field Enumeratio compress ADD Enable compression n Type MPLNK(Option switch for the al) PPP link.
PHB
PHB
This parameter ACT specifies the PHB Bit Field IPPM(Mandator to be activated Type y) with the IP PM.
BE(BE), AF11(AF11 ), AF12(AF12 ), AF13(AF13 ), AF21(AF21 ), AF22(AF22 ), AF23(AF23 ), AF31(AF31 ), AF32(AF32 ), AF33(AF33 ), AF41(AF41 ), AF42(AF42 ), AF43(AF43 ), EF(EF)
8/7/2013
6983267
162734118.xls.ms_office1
PHB
Per-Hop Behavior
BE, AF11, AF12, AF13, AF21, AF22, AF23, Enumeratio AF31, n Type AF32, AF33, AF41, AF42, AF43, EF
BE AF11 AF12 AF13 AF21 AF22 AF23 AF31 AF32 AF33 AF41 AF42 AF43 EF
8/7/2013
6993267
162734118.xls.ms_office1
ADD SCCPCHBASI C(Mandatory) ADD PCCPCH(Optio nal) ADD AICH(Optional) ADD RACH(Optional ) ADD PCPICH(Option al) ADD SCCPCHTFC( Mandatory) ADD PCH(Mandatory ) ADD PRACHACTO ASCMAP(Opti onal) ADD PRACHSLOTF ORMAT(Optio nal) ADD PRACHASC(O ptional) ADD ADD CELLMCCH( Mandatory)
PhyChId
SCCPCH ID
0~255
0~255
ID of the physical channel Interval carrying the Type MCCH. Interval Type
1~255
1~255
PICHId
PICH ID
0~255
0~255
PICHMode
PICH mode
Indicating the number of PIs contained in each frame of the ADD V18, V36, 18, 36, 72, PICH For detailed Enumeratio PICH(Optional) V72, V144 144 information of n Type this parameter, refer to 3GPP TS 25.211.
8/7/2013
7003267
162734118.xls.ms_office1
Difference between the transmit power of PICH and that of PCPICH. If the value is set too small, the UEs on the cell edge cannot receive the paging indication properly. This problem may cause a misoperation of reading the PCH, waste the battery of the UE, affect the coverage of the downlink common channel, and finally affect the cell coverage. If the value is too great, it causes interference to other channels, occupies the downlink transmit power, and affects the cell capacity. For details, refer to This parameter specifies the number of the slot that holds the PIU. This parameter specifies the number of packets for starting the EthOAM loopback test. This parameter specifies the length of packet for starting the EthOAM loopback test. This parameter specifies the maximum length of a loopback packet.
Interval Type
-10~5
-10~5
PIUSN
Interval Type
14~27
14 to 27
Interval Type
5~64
5 to 64
PKTLEN
PKT Size
Interval Type
64~1024
64 to 1024
Interval Type
10~1500
10 to 1500
8/7/2013
7013267
162734118.xls.ms_office1
PKTSIZE
This parameter specifies the size Interval of the ping Type packets.
20~1024
20 to 1024
PKTSIZE
PKT Size
This parameter PING Interval specifies the size MAC(Optional) Type of a sent packet.
95~512
95 to 512
Maximum PLMN tag value corresponding to ADD a LAC. It is LAC(Mandator defined by the y) Interval operator. For ADD Type detailed RAC(Mandator information of y) this parameter, refer to 3GPP TS 25.331.
1~256
1~256
Minimum PLMN tag value corresponding to ADD a LAC. It is LAC(Mandator defined by the y) Interval operator. For ADD Type detailed RAC(Mandator information of y) this parameter, refer to 3GPP TS 25.331.
1~256
1~256
8/7/2013
7023267
162734118.xls.ms_office1
PLPRD
This parameter ADD specifies the Packet lost IPLOGICPORT period of measure period (Optional) measuring the packet loss rate.
Interval Type
1~100
100~10000
PLTH
This parameter ADD specifies the Packet discard IPLOGICPORT threshold of threshold (Optional) discarding packets.
Interval Type
0~1000
0~1000
PMPRD
This parameter specifies the ACT interval for IPPM(Optional) sending IP PM packets.
Interval Type
1~100
100 to 10000
8/7/2013
7033267
162734118.xls.ms_office1
SET ETHPORT(Opti onal) SET MSPCMD(Man datory) CLR MSPREP(Optio nal) SET OPTLOP(Mand atory) SWP ETHPORT(Ma ndatory) SET MSP(Mandator y) ACT MSP(Optional) SET OPT(Optional) SET COPTLNK(Ma ndatory) ACT ETHPORT(Ma ndatory) ADD ETHREDPORT (Mandatory) ADD
PN
Port No.
Interval Type
0~7
PN
Port No.
SET This parameter Interval SCUPORT(Opti specifies the Type onal) number of a port. For the FG2a board, the port number ranges ACT Interval from 0 to 7. For ETHOAMAH( the GOUa board, Type Mandatory) the port number ranges from 0 to 1. This parameter specifies the number of the ADD Interval physical port ETHMEP(Optio Type where the local nal) MEP in the current MA resides.
0,2,4,6,8
0,2,4,6,8
PN
Port No.
0~7
0 to 7
PN
Port NO.
0~7
0 to 7
8/7/2013
7043267
162734118.xls.ms_office1
PN
Port No.
STR This parameter ETHOAMLOO Interval specifies the PTST(Mandator Type number of a port. y)
0~7
0 to 7
PN
Port No.
This parameter STR specifies the IPCHK(Mandat number of an ory) Ethernet port.
Interval Type
0~7
For the FG2a board, the value range of PN is 0 to 7. For the GOUa board, the value range of PN is 0 to 1.
PN
Port No.
SET This parameter Interval ALMPORT(Ma specifies the Type ndatory) number of a port.
1~32
1 to 32
This parameter ADD Rollbackpoint specifies the POINTDESI ROLLBACKP String Type Description description of the NFO OINT(Optional) rollback point.
0 to 250 characters
String Type -
1 to 250 characters
8/7/2013
7053267
162734118.xls.ms_office1
Timer length of the queue poll. The queue is polled for every time specified in this parameter. During each poll, all the expired users are removed from the queue and this user fails in access. Among all the unexpired users, resources SET are allocated in Interval QUEUEPREE the order of high Type MPT(Optional) priority to low priority. If resource allocation is successful, the user succeeds in access and traverse of this queue is stopped. Otherwise, the rest users are traversed until all the unexpired users go through this.
1~80
10~800
POLLTMR
Timer_Poll
Interval for sending POLL message.It ADD generally Interval SAALLNK(Opt indicates the Type ional) duration of a message arrives at the peer end and returns.
50~10000
Port
Destination Port
This parameter specifies the port ADD provided the FTP Interval FTPSCLTDPO server to be Type RT(Mandatory) accessed by the FTP client.
21~65535
21~65535
8/7/2013
7063267
162734118.xls.ms_office1
ADD This parameter PORTFLOWC specifies the TRLPARA(Ma protocol type of ndatory) the port.
IP, ATM
PORTTYPE
Port Type
This parameter specifies the type of the physical port where the ADD ETHER, local MEP in an ETHMEP(Man Enumeratio TRUNK MA resides. "FE" datory) n Type indicates an FE port. "TRUNK" indicates a Trunk group.
ETHER,TR UNK
This parameter CLOSE(Clo ADD specifies the Enumeratio se), CLOSE,OP EMU(Optional) switch for relay 1. n Type OPEN(Ope EN n) This parameter CLOSE(Clo ADD specifies the Enumeratio se), CLOSE,OP EMU(Optional) switch for relay 2. n Type OPEN(Ope EN n) This parameter CLOSE(Clo ADD specifies the Enumeratio se), CLOSE,OP EMU(Optional) switch for relay 3. n Type OPEN(Ope EN n) This parameter CLOSE(Clo ADD specifies the Enumeratio se), CLOSE,OP EMU(Optional) switch for relay 4. n Type OPEN(Ope EN n) This parameter CLOSE(Clo ADD specifies the Enumeratio se), CLOSE,OP EMU(Optional) switch for relay 5. n Type OPEN(Ope EN n) This parameter CLOSE(Clo ADD specifies the Enumeratio se), CLOSE,OP EMU(Optional) switch for relay 6. n Type OPEN(Ope EN n)
8/7/2013
7073267
162734118.xls.ms_office1
The power offset between the last access preamble and the message control part. The power of the message control part can be obtained by adding the offset to the access preamble power. If the value is ADD excessively low, Interval PRACHTFC(M the uplink Type andatory) interference may increase, and the uplink capacity may be affected. If the value is set too high, coverage may be affected. For detailed information of this parameter, refer to 3GPP TS 25.213.
-5~10
-5~10
8/7/2013
7083267
162734118.xls.ms_office1
The power increase step of the random access preambles transmitted before the UE receives the acquisition indicator in the random access process. If the value of Power increase step is too large, the access procedure will be shortened, ADD but it is more Interval PRACHBASIC( likely to cause Type Optional) power waste. If it is too small, the access procedure will be lengthened, but transmit power will be saved. This parameter must be set carefully. In addition, the higher the parameter value is, the smaller impact
1~8
1~8
8/7/2013
7093267
162734118.xls.ms_office1
This parameter ADD specifies the PPP IP Address NODEBESN(M port IP address Type andatory) for the DHCP server.
0.0.0.0~255 .255.255.25 5
PPPLNK
This parameter ADD specifies the Interval IPLOGICPORT number of a PPP Type (Mandatory) link. ADD PPPLNK(Optio nal) ADD MPLNK(Manda tory)
0~3
0~3
PPPLNKN
0~167
PPPMUX
PPP mux
If this parameter is set to Enable, the frame ADD multiplexing over PPPLNK(Optio the PPP link is nal) Disable, Enumeratio enabled. If this ADD Enable parameter is set to n Type MPGRP(Option Disable, the al) frame multiplexing over the PPP link is
8/7/2013
7103267
162734118.xls.ms_office1
PQNUM
This parameter is valid only when the port flow ADD control type is IP. Priority queue PORTFLOWC The "PQNUM" of Interval number TRLPARA(Ma an ATM queue is Type ndatory) "2" by default. You cannot change the default value.
0~5
0 to 5
ADD AICH(Optional)
ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLMBDRIN TERFREQ(Opti onal)
Uniquely identifying a PRACH in a cell corresponding to the AICH. Inter-frequency measurement reporting interval. In periodical report mode, the interval between two reports is the configured value. However, it is not recommended that the value "NON_PERIODI C_REPORT" be set, upon which the UE behaviour is not defined. This parameter has impact on the Uu signaling flow. If the interval is too short and the frequency is too high, the RNC may have burden in processing signaling. If the interval is too long, the network cannot detect the signal change in time, which may
Interval Type
0~255
0~255
NON_PERI ODIC_REP ORT(Non periodical reporting), D250~1 D500~2 D1000~3 D2000~4 Enumeratio D3000~5 n Type D4000~6 D6000~7 D8000~8 D12000~9 D16000~10 D20000~11 D24000~12 D28000~13 D32000~14 D64000
NON_PERI ODIC_REP ORT,250,50 0,1000,2000 ,3000,4000, 6000,8000,1 2000,16000, 20000,2400 0,28000,320 00,64000
8/7/2013
7113267
162734118.xls.ms_office1
The maximum number of preambles transmitted in a preamble ramping cycle. If the value of Max preamble retransmission is too small, the preamble power may fail to ramp to the required value. This may ADD Max preamble result in UE Interval PreambleRetr PRACHBASIC( retransmission access failure. If Type ansMax Optional) it is too large, the UE will repeatedly increase the power and make access attempts, which may result in interference to other UEs. For detailed information of this parameter, refer to 3GPP TS
1~64
1~64
8/7/2013
7123267
162734118.xls.ms_office1
Sequence No. of an available preamble signature. A maximum of 16 ADD signatures (from Bit Field PRACHBASIC( signature 0 to 15) Type Mandatory) can be selected. For detailed information of this parameter, refer to 3GPP TS 25.213.
SIGNATU RE0, SIGNATU RE1, SIGNATU RE2, SIGNATU RE3, SIGNATU RE4, SIGNATU RE5, SIGNATU RE6, SIGNATU RE7, SIGNATU RE8, SIGNATU RE9, SIGNATU RE10, SIGNATU RE11, SIGNATU RE12, SIGNATU RE13, SIGNATU RE14, SIGNATU
SIGNATU RE0, SIGNATU RE1, SIGNATU RE2, SIGNATU RE3, SIGNATU RE4, SIGNATU RE5, SIGNATU RE6, SIGNATU RE7, SIGNATU RE8, SIGNATU RE9, SIGNATU RE10, SIGNATU RE11, SIGNATU RE12, SIGNATU RE13, SIGNATU RE14, SIGNATU
OFF, ON
8/7/2013
7133267
162734118.xls.ms_office1
Indicating whether ARPbased preemption between TCs is supported. This switch only has impact on the TCbased priorities. When the priority is based on the TC and the switch is enabled, for the following two situations, the preempting SET service should PreemptRefA PreemptRefAr QUEUEPREE have a higher rpSwitch pSwitch MPT(Optional) priority and ARP priority than the preempted service does: 1.The preempting service is the streaming service and the preempted service is the interactive or background service. 2. The preempting service is the interactive service 1.There are three block priorities: high, normal and low. 2.High priority: Blocking a cell immediately. 3.Normal priority: Blocking a cell once there are no BLK Priority Block priority users in it within CELL(Optional) a specified time, or blocking it even if there are some users when the specified time expires. 4.Low priority: Blocking a cell when there are no users in the cell.
OFF, ON
HIGH(High priority), HIGH, NORMAL( Enumeratio NORMAL, Normal n Type LOW priority), LOW(Low priority)
8/7/2013
7143267
162734118.xls.ms_office1
This parameter ADD specifies the IPRT(Mandator priority of an IP y) route.
PRIORITY
Priority
HIGH, LOW
PRIORITY
Priority of the signalling link. 0 Interval indicates the Type highest priority.
0~99
0~99
PRIORITY
ADD MTP3RT(Optio Route priority. 0 nal) Interval Route priority indicates the ADD Type highest priority. M3RT(Optional )
0~99
0~99
8/7/2013
7153267
162734118.xls.ms_office1
Reference used to determine which priority is arranged first in the priority sequence. If the ARP is preferably used, the priority sequence is gold > silver > copper. If the ARPs are all the same, the TrafficClass is used and the SET priority sequence ARP, USERPRIORIT Enumeratio ARP,Traffic is conversational TrafficClass Y(Optional) n Type Class > streaming > interactive > background. If the TrafficClass is preferably used, the priority sequence is conversational > streaming > interactive > background. If the TrafficClass factors are all the same, the ARP
8/7/2013
7163267
162734118.xls.ms_office1
This parameter specifies the capability of the cells with a specific [Service priority group Identity] for extension services, such as CMB and MBMS. The value 0 means that these cells do not support extension services. The value 1 indicates the highest priority whereas the value 7 indicates the lowest. That is, extension services are preferably absorbed by this group of cells. This parameter specifies the capability of the cells with a specific [Service priority group Identity] for HSDPA services. The value 0 means that these cells do not support HSDPA services. The value 1 indicates the highest priority whereas the value 7 indicates the lowest. That is, HSDPA are preferably absorbed by this group of cells.
ADD SPG(Optional)
Interval Type
0~7
0~7
ADD SPG(Optional)
Interval Type
0~7
0~7
8/7/2013
7173267
162734118.xls.ms_office1
This parameter specifies the capability of the cells with a specific [Service priority group Identity] for HSUPA services. The value 0 means that these cells do not support HSUPA services. The value 1 indicates the highest priority whereas the value 7 indicates the lowest. That is, HSUPA services are preferably absorbed by this group of cells. This parameter specifies the capability of the cells with a specific [Service priority group Identity] for R99 non-real-time services. The value 0 means that these cells do not support R99 non-real-time services. The value 1 indicates the highest priority whereas the value 7 indicates the lowest. That is, R99 non-real-time services are preferably absorbed by this group of cells.
ADD SPG(Optional)
Interval Type
0~7
0~7
Interval Type
0~7
0~7
8/7/2013
7183267
162734118.xls.ms_office1
This parameter specifies the capability of the cells with a specific [Service priority group Identity] for R99 real-time services. The value 0 means that these cells do not support R99 real- Interval time services. The Type value 1 indicates the highest priority whereas the value 7 indicates the lowest. That is, R99 real-time services are preferably absorbed by this group of cells. This parameter specifies the processing duration of the cell blocking in the RNC.
0~7
0~7
Interval Type
2~30
2~30
8/7/2013
7193267
162734118.xls.ms_office1
1) INVOKE_TRAC E_SWITCH. When it is checked, RNC will start Invoke Trace procedure upon receiving INVOKE TRACE Message form CN, otherwise, RNC won't start the Invoke Trace procedure though SET it receives the Process switch RRCTRLSWIT INVOKE CH(Mandatory) TRACE message. 2) SYS_INFO_UPD ATE_FOR_IU_R ST. When it is checked, RNC will broadcast SYSTEM INFORMATION messages to UE when Iu reset, otherwise, RNC won't broadcast SYSTEM INFORMATION SS7 protocol type supported by the DSP. ITUT: International Telecommunicati on Union Telecommunicati on ADD Standardization SS7 protocol N7DPC(Option Sector type al) ANSI: American National Standards Institute TTC: THE TELECOMMUN ICATION TECHNOLOGY COMMITTEE (use for JAPAN).
PROCESSS WITCH
INVOKE_T RACE_SWI TCH, SYS_INFO _UPDATE_ FOR_IU_R ST, DRNC_DIR ECT_DSCR , RNC_SHA RE_SWITC H, RNCAP_I MSI_HO_S WITCH, TERMINA L_VERSIO N_DEBAS E_SWITCH , SYS_HO_O UT_CIPHE R_SWITCH , SYS_HO_C IPHER_CO NFIG, BARRED_ CELL_FOR _CSDOMA
PROT
8/7/2013
7203267
162734118.xls.ms_office1
If the background Radio Access Bear timer T1 expired,the PDCP will send RRC release request message to RRC layer and start timer T2,after sending release SET Interval request to RRC PSINACTTIME Type layer,if the R(Optional) Background Radio Access Bear haven't been released until the Background service T2 timeout, the PDCP layer will resend release request indication.
0~60
0~60
If the Conversational Radio Access Bear timer T1 expired,the PDCP will send RRC release request message to RRC layer and start timer T2,after sending release SET request to RRC Interval ProtectTmrFo Conversational PSINACTTIME layer, if the Type rCon service T2 R(Optional) Conversational Radio Access Bear haven't been released until the Conversational service T2 timeout, the PDCP layer will resend release request indication.
0~60
0~60
8/7/2013
7213267
162734118.xls.ms_office1
If the IMS Radio Access Bear timer T1 expired,the PDCP will send RRC release request message to RRC layer and start timer T2, after sending SET release request to Interval ProtectTmrFo IMS signal T2 PSINACTTIME RRC layer, if the Type rImsSig R(Optional) IMS Radio Access Bear for signal haven't been released until the IMS service T2 timeout, the PDCP layer will resend release request indication.
0~60
0~60
If the Interactive Radio Access Bear timer T1 expired,the PDCP will send RRC release request message to RRC layer and start timer T2,after sending release SET request to RRC Interval PSINACTTIME layer, if the Type R(Optional) Interactive Radio Access Bear haven't been released until the Interactive service T2 timeout, the PDCP layer will resend release request indication.
0~60
0~60
8/7/2013
7223267
162734118.xls.ms_office1
If the Streaming Radio Access Bear timer T1 expired,the PDCP will send RRC release request message to RRC layer and start timer T2,after sending release SET request to RRC Interval PSINACTTIME layer, if the Type R(Optional) Streaming Radio Access Bear haven't been released until the Streaming service T2 timeout, the PDCP layer will resend release request indication.
0~60
0~60
PS
Port select
This parameter ALL(Select SET specifies whether all ports), OPT(Mandatory to select a single Enumeratio SINGLE(Se ALL,SING ) port or all ports n Type lect one LE on a board. port)
Indicating whether to replace relocation CORRM_S CORRM_S ADD procedure with RNSR_PSB RNSR_PSB NRNC(Optional DSCR procedure Enumeratio E_RELOC, E_RELOC, ) between the RNC n Type CORRM_S CORRM_S and the RNSR_PSB RNSR_PSB neighboring RNC E_DSCR E_DSCR for PS BE
8/7/2013
7233267
162734118.xls.ms_office1
PSBKGDL
R99 PS ADD background Interval TRMFACTOR( service downlink Type Optional) factor.
0~100
0~100
8/7/2013
7243267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
R99 PS R99 PS ADD background background pri PSBKGPRIT LOADEQ(Opti bearing primary path load H onal) path load threshold threshold.
Interval Type
0~100
0~100
8/7/2013
7253267
162734118.xls.ms_office1
R99 PS ADD R99 PS PSBKGSECP background TRMMAP(Opti background ATH secondary path onal) secondary path.
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
PSBKGSEC WHT
R99 PS ADD background pri LOADEQ(Opti sec path load onal) ratio threshold
Interval Type
0~100
0~100
8/7/2013
7263267
162734118.xls.ms_office1
PSBKGUL
R99 PS R99 PS ADD background background TRMFACTOR( service uplink service uplink Optional) factor factor.
Interval Type
0~100
0~100
Offset of the PSCH transmit power from the PCPICH transmit power in a cell. If the value is excessively low, UEs at the edge of cells fail in network searching, resulting in influence on coverage of the PSCH ADD Interval PSCHPower downlink transmit power PSCH(Optional) Type common channel. This finally affects the cell coverage. If the value is excessively high, the power resources are wasted, and other channels are interfered seriously, thus the cell capacity is influenced.
-350~150
8/7/2013
7273267
162734118.xls.ms_office1
R99 PS R99 PS conversational ADD conversational Interval PSCONVDL service TRMFACTOR( service downlink Type downlink Optional) factor. factor
0~100
0~100
8/7/2013
7283267
162734118.xls.ms_office1
R99 PS ADD R99 PS PSCONVPRI conversational TRMMAP(Opti conversational PATH primary path onal) primary path.
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
R99 PS R99 PS ADD conversational conversational PSCONVPRI LOADEQ(Opti bearing primary pri path load TH onal) path load threshold threshold.
Interval Type
0~100
0~100
8/7/2013
7293267
162734118.xls.ms_office1
R99 PS ADD R99 PS PSCONVSE conversational TRMMAP(Opti conversational CPATH secondary path onal) secondary path.
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
R99 PS R99 PS conversational conversational ADD primary PSCONVSE pri sec path LOADEQ(Opti secondary path CWHT load ratio onal) load ratio threshold threshold.
Interval Type
0~100
0~100
8/7/2013
7303267
162734118.xls.ms_office1
R99 PS R99 PS ADD conversational conversational PSCONVUL TRMFACTOR( service uplink service uplink Optional) factor factor.
Interval Type
0~100
0~100
ADD CELLSETUP( Mandatory) ADD QUICKCELLS ETUP(Mandato ry) ADD NRNCCELL(M andatory)
Sequence No. of a DL primary scrambling code in a cell. For Interval detailed Type information of this parameter, refer to 3GPP TS 25.413.
0~511
0~511
R99 PS high priority ADD interactive LOADEQ(Opti bearing primary onal) path load threshold.
Interval Type
0~100
0~100
8/7/2013
7313267
162734118.xls.ms_office1
R99 PS high priority R99 PS high ADD interactive PSHIGHINT interactive pri LOADEQ(Opti primary ERACTSEC sec path load onal) secondary path WHT ratio threshold load ratio threshold.
Interval Type
0~100
0~100
PS domain Relocation GSM load THD. This parameter specifies the PS domain relocation GSM load threshold. When the GSM load policy is used, that is, when [NcovHoOn2GldI ADD nd] in SET CELLINTERR INTERRATHON ATHONCOV( COV is set to Optional) ON, the PS Interval SET domain interType INTERRATHO system relocation NCOV(Optional out process will ) be stopped if the GSM system send its cell load to the RNC and the cell load exceeds the PS domain Reloc GSM load THD. Otherwise, the RNC does not stop the PS domain intersystem relocation out process.
0~100
0~100%
8/7/2013
7323267
162734118.xls.ms_office1
When detecting that the Ps' Background User had no data to transfer for a long SET time which longer Interval PSINACTTIME than this timer, Type R(Optional) the PDCP layer would request the RRC layer to release this Radio Access Bear.
0~14400
0~14400
When detecting that the Ps' Conversational User had no data to transfer for a SET long time which Interval PsInactTmrFo Conversational PSINACTTIME longer than this Type rCon service T1 R(Optional) timer, the PDCP layer would request the RRC layer to release this Radio Access Bear.
0~14400
0~14400
8/7/2013
7333267
162734118.xls.ms_office1
When detecting that the Ps' IMS signal had no data to transfer for a long time which SET longer than this Interval PSInactTmrF IMS signal T1 PSINACTTIME timer, the PDCP Type orImsSig R(Optional) layer would request the RRC layer to release this Radio Access Bear.
0~64800
0~64800
When detecting that the Ps' Interactive User had no data to transfer for a long SET time which longer Interval PSINACTTIME than this timer, Type R(Optional) the PDCP layer would request the RRC layer to release this Radio Access Bear.
0~14400
0~14400
8/7/2013
7343267
162734118.xls.ms_office1
When detecting that the Ps' Streaming User had no data to transfer for a long SET time which longer Interval PSINACTTIME than this timer, Type R(Optional) the PDCP layer would request the RRC layer to release this Radio Access Bear.
0~14400
0~14400
OFF, ON
8/7/2013
7353267
162734118.xls.ms_office1
SET Ps Information OPERATORCF Interval Update protection GPARA(Manda Type timer. tory)
60~900
60~900
ADD R99 PS Interval TRMFACTOR( interactive service Type Optional) downlink factor.
0~100
0~100
8/7/2013
7363267
162734118.xls.ms_office1
R99 PS ADD R99 PS interactive Interval PSINTERUL TRMFACTOR( interactive service service uplink Type Optional) uplink factor. factor
0~100
0~100
8/7/2013
7373267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, R99 PS high ADD R99 PS high PRI AF42, PSINTHGHP PRI interactive TRMMAP(Opti interactive Enumeratio AF43, EF, RIPATH primary path onal) primary path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
8/7/2013
7383267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, R99 PS high ADD R99 PS high PRI AF42, PSINTHGHS PRI interactive TRMMAP(Opti interactive Enumeratio AF43, EF, ECPATH secondary path onal) secondary path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
8/7/2013
7393267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, R99 PS low ADD R99 PS low PRI AF42, PSINTLOWP PRI interactive TRMMAP(Opti interactive Enumeratio AF43, EF, RIPATH primary path onal) primary path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
8/7/2013
7403267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, R99 PS low ADD R99 PS low PRI AF42, PSINTLOWS PRI interactive TRMMAP(Opti interactive Enumeratio AF43, EF, ECPATH secondary path onal) secondary path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
8/7/2013
7413267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
8/7/2013
7423267
162734118.xls.ms_office1
R99 PS ADD R99 PS middle middle PRI PSINTMIDS TRMMAP(Opti PRI interactive interactive ECPATH onal) secondary path. secondary path
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
R99 PS low priority ADD interactive LOADEQ(Opti bearing primary onal) path load threshold.
Interval Type
0~100
0~100
R99 PS low priority R99 PS low ADD interactive PSLOWINTE interactive pri LOADEQ(Opti primary RACTSECW sec path load onal) secondary path HT ratio threshold load ratio threshold.
Interval Type
0~100
0~100
8/7/2013
7433267
162734118.xls.ms_office1
R99 PS middle priority ADD interactive LOADEQ(Opti bearing primary onal) path load threshold.
Interval Type
0~100
0~100
R99 PS mid PSMIDINTE pri sec path RACTSECW load ratio HT threshold
R99 PS middle priority ADD interactive LOADEQ(Opti primary onal) secondary path load ratio threshold.
Interval Type
0~100
0~100
This parameter specifies feature SUPP_NO mode of operators NE, SUPP_NO in the PS domain. SET SUPP_IUF NE,SUPP_I You should OPERATORCF LEX, UFLEX,SU configure the Enumeratio GPARA(Option SUPP_MO PP_MOCN, network resource n Type al) CN, SUPP_IUF identifier (NRI) SUPP_IUF LEX_MOC when MOCN or LEX_MOC N Iu-Flex is N supported.
8/7/2013
7443267
162734118.xls.ms_office1
Interval Type
1~10
1~10
Threshold of PS call drop ratio per SPU to report KPI alarm.In a checking period, if the ratio is SET higher than this Interval KPIALMTHD( threshold and the Type Optional) number of PS call release is higher than the related threshol, the KPI alarm of PS call drop ratio is reported.
0~100
0~100
8/7/2013
7453267
162734118.xls.ms_office1
The minimum number of PS RAB establish request per SPU to report KPI alarm. In a checking period,if Minimum the number of PS SET Number of PS RAB establish Interval PsRabEstAtt KPIALMTHD( RAB Establish request is higher Type MinNum Optional) Request than the threshold and the PS RAB setup successful ratio is lower than this threshold,the KPI alarm of PS RAB setup ratio is reported. Threshold of PS RAB setup successful ratio per SPU to report KPI alarm. In a checking period,if the ratio is lower Threshold of SET than this PS RAB Setup PsRabEstSuc KPIALMTHD( threshold and the Successful cRatioThd Optional) number of PS Ratio RAB establish request is higher than the related threshold,the KPI alarm of PS RAB setup ratio is reported. The minimum number of PS call release per SPU to report KPI alarm.In a checking period, if the number of Minimum SET PS call release is PsRabRelMin Number of PS KPIALMTHD( higher than the Num Call Release Optional) related threshold and the PS call drop ratio is higher than this threshold, the KPI alarm of PS call drop ratio is reported.
0~65534
0~65534
Interval Type
0~100
0~100
Interval Type
0~65534
0~65534
8/7/2013
7463267
162734118.xls.ms_office1
SET DSACAUTOA LGO(Mandator Restriction for y) PsRestriction PS ADD CELLDSACM ANUALPARA( Mandatory)
Whether to impose the access FALSE, Enumeratio restriction on the TRUE n Type PS domain.
FALSE,TR UE
Indicating whether the cell allows PS service inter-RAT handover. ON: PS service inter-RAT handover is enabled. OFF: PS service inter-RAT handover is disabled. Service handover refers to the Inter-RAT PS ADD handover attribute PSServiceHO handover CELLHOCOM Enumeratio ON, OFF and related Switch switch M(Optional) n Type parameter configuration on the network side for each service. When a service is established, the related measurements and inter-RAT handover are immediately triggered. These two switches are enabled only for service handover;
ON,OFF
8/7/2013
7473267
162734118.xls.ms_office1
ADD R99 PS Interval TRMFACTOR( streaming service Type Optional) downlink factor.
0~100
0~100
8/7/2013
7483267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, ADD R99 PS AF42, TRMMAP(Opti streaming primary Enumeratio AF43, EF, onal) path. n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
R99 PS ADD streaming bearing Interval LOADEQ(Opti primary path load Type onal) threshold.
0~100
0~100
8/7/2013
7493267
162734118.xls.ms_office1
R99 PS ADD R99 PS PSSTRMSEC streaming TRMMAP(Opti streaming PATH secondary path onal) secondary path.
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
R99 PS R99 PS ADD streaming primary streaming pri Interval PSSTRMSEC LOADEQ(Opti secondary path sec path load Type WHT onal) load ratio ratio threshold threshold.
0~100
0~100
8/7/2013
7503267
162734118.xls.ms_office1
R99 PS ADD R99 PS streaming Interval PSSTRMUL TRMFACTOR( streaming service service uplink Type Optional) uplink factor. factor
0~100
0~100
8/7/2013
7513267
162734118.xls.ms_office1
PS rate negotiation switch. 1) PS_BE_EXTRA_ LOW_RATE_AC CESS_SWITCH: When the switch is on, access at a rate of 0 kbit/s or on the FACH is determined according to the current SET connection state CORRMALGO of the RRC if the Bit Field SWITCH(Optio PS BE admission Type nal) and the later preemption and queuing fail. 2) PS_BE_INIT_RA TE_DYNAMIC_ CFG_SWITCH: When the switch is on, the initial rate of the service should be dynamically configured according to the value of Ec/No The total PS throughput of all ACT the operators Interval LICENSE(Opti cannot exceed Type onal) that defined in the license file.
PsSwitch
PS_BE_EX TRA_LOW _RATE_AC CESS_SWI TCH, PS_BE_INI T_RATE_D YNAMIC_ CFG_SWIT CH, PS_BE_IU_ QOS_NEG _SWITCH, PS_RAB_D OWNSIZIN G_SWITC H, PS_RSC_F EEDBK_R ABSETUP_ CACFAIL_ SWITCH, PS_STREA M_IU_QOS _NEG_SWI TCH, PS_BE_ST RICT_IU_ QOS_NEG _SWITCH
PS_BE_EX TRA_LOW _RATE_AC CESS_SWI TCH, PS_BE_INI T_RATE_D YNAMIC_ CFG_SWIT CH, PS_BE_IU_ QOS_NEG _SWITCH, PS_RAB_D OWNSIZIN G_SWITC H, PS_RSC_F EEDBK_R ABSETUP_ CACFAIL_ SWITCH, PS_STREA M_IU_QOS _NEG_SWI TCH, PS_BE_ST RICT_IU_ QOS_NEG _SWITCH
0~3910000
0 to 3910000
PT
Port Type
SET This parameter BOOL(Digi ALMPORT(Ma specifies the type Enumeratio tal Port), BOOL,VAL ndatory) of the port. n Type VALUE(An UE alog Port)
8/7/2013
7523267
162734118.xls.ms_office1
PTIP
This parameter ADD specifies the IP NODEBESN(M address for the andatory) NodeB FE port.
IP Address Type
0.0.0.0~255 .255.255.25 5
8/7/2013
7533267
162734118.xls.ms_office1
This parameter specifies the ADD subnet mask for IP Address NODEBESN(M the IP address of Type andatory) the NodeB FE port.
0.0.0.0~255 .255.255.25 5
8/7/2013
7543267
162734118.xls.ms_office1
This parameter specifies whether MBMS PTM nonstreaming bearers can be preempted by other MBMS PTM bearers or nonMBMS bearers. If this parameter is set to ON, a PTM non-streaming bearer might be SET pre-empted by an RNCMBMSPA Enumeratio ON, OFF MBMS bearer of RA(Optional) n Type a higher priority or a non-MBMS bearer in the case of congestion. Thus, the MBMS service is disrupted, which has a relatively great impact because the PTM bearer serves more than one user. This parameter specifies whether MBMS PTM streaming bearers can pre-empt other MBMS PTM bearers and non-MBMS bearers. If this parameter is set to SET ON, pre-emption RNCMBMSPA is triggered when Enumeratio ON, OFF RA(Optional) PTM streaming n Type bearer admission fails. That is, a lower-priority MBMS bearer or a non-MBMS bearer is released. Thus, the ongoing service is disrupted and call drop even occurs.
ON, OFF
ON, OFF
8/7/2013
7553267
162734118.xls.ms_office1
This parameter specifies whether MBMS PTM streaming bearers can be preempted by other MBMS PTM bearers or nonMBMS bearers. If this parameter is set to ON, a PTM streaming bearer might be preSET empted by an RNCMBMSPA Enumeratio ON, OFF MBMS bearer of RA(Optional) n Type a higher priority or a non-MBMS bearer in the case of congestion. Thus, the MBMS service is disrupted, which has a relatively great impact because the PTM bearer serves more than one user.
ON, OFF
PTYPE
Port type
This parameter SET specifies the type ETHPORT(Ma Enumeratio FE, GE of an Ethernet ndatory) n Type port.
FE, GE
Interval Type
1~32
1~32
8/7/2013
7563267
162734118.xls.ms_office1
PucPeriodTi merLen
Identifying the potential user control period. When the cell load is high, the SET cell selection and LDCPERIOD( reselection can be Optional) periodically Interval SET modified in order Type SATLDCPERI to enable users in OD(Optional) unconnected mode to select other cells more easily, thus reducing the local cell load.
6~86400
6~86400
PunishTime
Punish Time
This parameter specifies the coefficient of the penalty time after the PTP RB admission fails. The penalty time SET is MCCH Interval RNCMBMSPA modification Type RA(Optional) period multiplied by this parameter. During the penalty time, users in the cell are not allowed to initiate PTP RB requests.
0~60
0~60
8/7/2013
7573267
162734118.xls.ms_office1
PwrCtrlAlg
This parameter is used to inform the UE of the method for translating the received Transmit Power Control Power control (TPC) commands. ALGORIT ALGORIT SET algorithm In other words, it Enumeratio HM1, HM1, FRC(Optional) selection is used to select n Type ALGORIT ALGORIT UL power control HM2 HM2 algorithm. For details of this parameter, refer to the 3GPP TS 25.214.
This parameter specifies the minimum DSCP value of queue 0. SET The IP packet Min DSCP of Interval QUEUEMAP(O with the DSCP Q0MINDSCP queue 0 Type ptional) value within the range (63, minimum DSCP value of queue 0] enters queue 0.
0~63
0 to 63
8/7/2013
7583267
162734118.xls.ms_office1
This parameter specifies the minimum DSCP value of queue 1. The IP packet SET with the DSCP Min DSCP of Interval QUEUEMAP(O value within the Q1MINDSCP queue 1 Type ptional) range (minimum DSCP value of queue 0, minimum DSCP value of queue 1] enters queue 1.
0~63
0 to 63
This parameter specifies the minimum DSCP value of queue 2. The IP packet SET with the DSCP Min DSCP of Interval QUEUEMAP(O value within the Q2MINDSCP queue 2 Type ptional) range (minimum DSCP value of queue 1, minimum DSCP value of queue 2] enters queue 2.
0~63
0 to 63
8/7/2013
7593267
162734118.xls.ms_office1
This parameter specifies the minimum DSCP value of queue 3. The IP packet SET with the DSCP Min DSCP of Interval QUEUEMAP(O value within the Q3MINDSCP queue 3 Type ptional) range (minimum DSCP value of queue 2, minimum DSCP value of queue 3] enters queue 3.
0~63
0 to 63
This parameter specifies the minimum DSCP value of queue 4. The IP packet SET with the DSCP Min DSCP of Interval QUEUEMAP(O value within the Q4MINDSCP queue 4 Type ptional) range (minimum DSCP value of queue 3, minimum DSCP value of queue 4] enters queue 4.
0~63
0 to 63
8/7/2013
7603267
162734118.xls.ms_office1
Function set supported by the local RNC for the adjacent node The value CS1 (or CS2) indicates that the local end connects to the adjacent node through the CS1 (or CS2) version protocol. The CS2 ADD version protocol ADJNODE(Opt is backward Enumeratio CS1, CS2 ional) compatible with n Type the CS1 version protocol. Therefore, it is recommended to use the default value CS2 except that the adjacent node is not compatible with CS2 messages from the local end.
CS1, CS2
8/7/2013
7613267
162734118.xls.ms_office1
Qhcs
Quality threshold of HCS cell reselection. It can be used to calculate the Interval quality level of Type the specified cell in HCS reselection H rules.
0~99
0~99
This parameter indicates that in the CELL_FACH connection mode, the measurement hysteresis of the UE is 1. It is used when CPICH RSCP is used in cell selection and reselection Hysteresis measurement. ADD 1for UE in This parameter is Interval Qhyst1sfach CELLSELRES CELL_FACH Type not configured EL(Optional) state when the value is 255. Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed inforamtion, refer to 3GPP TS 25.304.
0~40,255
{0~40},{25 5}
8/7/2013
7623267
162734118.xls.ms_office1
This parameter indicates that in the CELL_PCH or URA_PCH connection mode, the measurement hysteresis of the UE is 1. It is used when CPICH RSCP is used in cell selection and Hysteresis 1 reselection for UE in ADD measurement. Qhyst1spch CELL_PCH or CELLSELRES This parameter is URA_PCH EL(Optional) not configured state when the value is 255. Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed inforamtion, refer to 3GPP TS 25.304. This parameter indicates that in the CELL_FACH connection mode, the measurement hysteresis of the UE is 2. It is used when CPICH EcNo is used in cell selection and reselection Hysteresis 2 measurement. ADD for UE in This parameter is Qhyst2sfach CELLSELRES CELL_FACH not configured EL(Optional) state when the value is 255. Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed inforamtion, refer to 3GPP TS 25.304.
Interval Type
0~40,255
{0~40},{25 5}
Interval Type
0~40,255
{0~40},{25 5}
8/7/2013
7633267
162734118.xls.ms_office1
This parameter indicates that in the CELL_PCH or URA_PCH connection mode, the measurement hysteresis of the UE is 2. It is used when CPICH EcNo is used in cell selection and Hysteresis 2 reselection for UE in ADD measurement. Interval CELL_PCH or CELLSELRES This parameter is Type URA_PCH EL(Optional) not configured state when the value is 255. Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed inforamtion, refer to 3GPP TS 25.304.
Qhyst2spch
0~40,255
{0~40},{25 5}
8/7/2013
7643267
162734118.xls.ms_office1
Offset between the neighboring GSM cell and WCDMA cell. This specifies the offset of the measurement value of the neighboring GSM cell signal quality. This parameter is used for RSSI measurement. The offset is ADD subtracted from Interval GSMNCELL(O the neighboring Type ptional) cell measurement value before cell reselection. In cell reselection algorithm, this parameter is used for moving the border of a cell. Content: During cell selection or resection, the larger the value of the parameter, the smaller the probability of
Qoffset1sn
Qoffset1sn
-50~50
-50~50
8/7/2013
7653267
162734118.xls.ms_office1
The minimum required quality threshold corresponding to CPICH Ec/No. The UE can camp on the cell only when the measured CPICH Ec/No is greater than the value of this parameter. The higher the ADD parameter value CELLSELRES is, the more EL(Optional) difficult it is for ADD the UE to reside NRNCCELL(M in the cell. The andatory) lower parameter value is, the easier it is for the UE to reside in the cell, but it is possible that the UE cannot receive the system messages that are sent through the PCCPCH. For detailed information, refer This parameter indicates whether to configure the minimum quality level. When it is set to FALSE, the UE adopts the corresponding value of the current serving ADD cell, added NRNCCELL(O through the ADD ptional) CELLSELRESEL command. This parameter is generally set to FALSE. When it is set to TRUE, the UE adopts the value in ADD NRNCCELL command.
Qqualmin
Interval Type
-24~0
-24~0
QqualminInd
TRUE(Conf igure the minimum quality threshold), Enumeratio TRUE,FAL FALSE(Not n Type SE configure the minimum quality threshold)
8/7/2013
7663267
162734118.xls.ms_office1
The minimum required RX threshold corresponding to CPICH RSCP. The UE can camp on the cell only when the measured CPICH RSCP is greater than the value of this parameter. The setting of ADD Qrxlevmin should CELLSELRES be related to EL(Optional) Qqualmin. The Interval ADD higher the Type NRNCCELL(M parameter is, the andatory) more difficult it is for the UE to reside in the cell. The lower parameter is, the easier it is for the UE to reside in the cell, but it is possible that the UE cannot receive the system messages that are sent through the
Qrxlevmin
Min Rx level
-58~-13
-115~-25, step:2
8/7/2013
7673267
162734118.xls.ms_office1
Qrxlevmin
Minimum RX level of the GSM cell. Before the UE camps on the cell, take the measurement of the signal quality in the cell. If the quality is better ADD than this Interval Min RX level GSMNCELL(O parameter, this Type ptional) indicates that the cell can obtain better QoS and the UE is allowed to camp on this cell. Otherwise, the UE cannot obtain good QoS in this cell and does not camp on the cell.
-58~-13
-115~25,Step:2
Indicating whether the actual value of Qrxlevmin should be added with the value of DeltaQrxlevmin or not. If ADD QrxlevminExtSup CELLSELRES is set to TRUE, Min Rx level EL(Optional) TRUE, then Qrxlevmin = QrxlevminExt Enumeratio Extend Support ADD FALSE Qrxlevmin + Sup n Type NRNCCELL(O DeltaQrxlevmin; ptional) Otherwise, the value of Qrxlevmin does not change. For detailed information of this parameter, refer to 3GPP TS 25.331 10.3.2.3.
TRUE,FAL SE
8/7/2013
7683267
162734118.xls.ms_office1
This parameter indicates whether to configure the minimum RX level. When it is set to FALSE, the UE adopts the ADD corresponding Min RX level NRNCCELL(O value of the QrxlevminInd ind ptional) current serving cell, added through the ADD CELLSELRESEL command. This parameter is generally set to FALSE. Measurement quantity of cell selection and reselection. It can Cell Selbe set to CPICH ADD reselection Ec/N0 or CPICH QualMeas CELLSELRES quality RSCP. For EL(Optional) measure detailed information of this parameter, refer to 3GPP TS 25.304.
TRUE(Conf igure the minimum signal level for access), Enumeratio TRUE,FAL FALSE(Not n Type SE configure the minimum signal level for access)
Indicating whether queue is supported. When a user initiates a call, if cell resources are SET insufficient and QUEUEPREE Enumeratio OFF, ON the user is queue MPT(Optional) n Type supportive, the RNC tries to arrange this user to join the queue to increase access success ratio.
OFF, ON
8/7/2013
7693267
162734118.xls.ms_office1
Queue length. The total number of users in queue of each cell should not exceed the value specified in this parameter. When a new user needs queuing, 1) If the queue has vacancy, the user joins the queue immediately. 2) If the queue is full SET and there is a user Interval Queue length QUEUEPREE whose queue time Type MPT(Optional) exceeds the allowed maximum queue time, this user is out of the queue and access fails. At the same time, the new user joins the queue. 3) If the queue has a user whose priority is lower than that of the new user, the user in the queue with ADD TYPRABOLPC (Mandatory) ADD TYPRABDCC CMC(Mandator y) This parameter ADD TYPRABRLC( specifies the Service index number that Interval Mandatory) parameter identifies the Type ADD index TYPRABHSPA configuration of a typical RAB. (Mandatory) ADD TYPRABBASI C(Mandatory) ADD TYPRABQUA LITYMEAS(M andatory)
QueueLen
5~20
5~20
RabIndex
0~99
0~99
8/7/2013
7703267
162734118.xls.ms_office1
The timer is started when the RNC initiates the RAB Modify procedure. If RAB modify message is received from the SET CN when this Interval COIFTIMER(O timer is actived, Type ptional) the rate information assigned by CN when establishing traffic will be reserved as the new assigned rate is used. ADD RAC(Mandator y) ADD CELLSETUP( Mandatory) ADD QUICKCELLS ETUP(Mandato ry) ADD GSMCELL(Ma ndatory) ADD NRNCCELL(M andatory)
1~65535
1~65535
RAC
Identifying a routing area in a location area for a PLMN of GSMMAP type. It is defined by the Interval operator. For Type detailed information of this parameter, refer to 3GPP TS 23.003.
0~255
0~255
8/7/2013
7713267
162734118.xls.ms_office1
Sequence No. of an available sub channel. A maximum of 12 sub channels ADD (from sub channel Bit Field PRACHBASIC( 0 to 11) can be Type Mandatory) selected. For detailed information of this parameter, refer to 3GPP TS 25.214.
SUBCHAN EL0, SUBCHAN EL1, SUBCHAN EL2, SUBCHAN EL3, SUBCHAN EL4, SUBCHAN EL5, SUBCHAN EL6, SUBCHAN EL7, SUBCHAN EL8, SUBCHAN EL9, SUBCHAN EL10, SUBCHAN EL11
SUBCHAN EL0, SUBCHAN EL1, SUBCHAN EL2, SUBCHAN EL3, SUBCHAN EL4, SUBCHAN EL5, SUBCHAN EL6, SUBCHAN EL7, SUBCHAN EL8, SUBCHAN EL9, SUBCHAN EL10, SUBCHAN EL11. (Multiple options.)
8/7/2013
7723267
162734118.xls.ms_office1
RafcTmr
Trafc
A timer used to SET wait for the reset Interval IUTIMERAND response from Type NUM(Optional) CN.
When RAN SET Sharing RAN Sharing OPERATORSH RANSharing Supported,RNC Support ARINGMODE( Support can configure Optional) multi-plmn.
NO,YES
8/7/2013
7733267
162734118.xls.ms_office1
Identifying the type of the interRAT cell NO_CAPABILIT Y indicates that the capacity of the GSM cell NO_CAPA remains BILITY(Cel ADD Inter-RAT cell unknown. It is not l capability RatCellType GSMCELL(Ma Enumeratio type recommended to unknown), ndatory) n Type set the cell type to GSM~1 NO_CAPABILIT GPRS~2 Y. If the cell type EDGE is NO_CAPABILIT Y, the inter-RAT handover cannot be triggered.
RatcTmr
Tratc
Interval Type
0~240000
0~240000
8/7/2013
7743267
162734118.xls.ms_office1
The rate matching factor of a transport channel.For detailed information of this parameter, refer to 3GPP TS 25.212. DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus ADD reducing the cell CELLOLC(Opti downlink load. onal) This parameter defines the downlink data rate recover timer length in fast TF restriction. RateRstrctTimerL en and RateRecoverTime rLen are effective only to the downlink. The uplink fast TF restriction is performed by the
ADD FACH(Optional ) Rate matching ADD RateMatching attribute RACH(Optional Attr ) ADD PCH(Optional)
Interval Type
1~256
1~256
Interval Type
1~65535
1~65535
8/7/2013
7753267
162734118.xls.ms_office1
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus ADD reducing the cell Interval CELLOLC(Opti downlink load. Type onal) This parameter defines the downlink data rate restrict coefficient in fast TF restrict The smaller this parameter is, the larger the TF restrict effect. The lower the parameter is, the more severe the rate is restricted. An excessive low
1~99
0.01~0.99, step:0.01
8/7/2013
7763267
162734118.xls.ms_office1
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus ADD reducing the cell Interval CELLOLC(Opti 1~65535 downlink load. Type onal) This parameter defines the time length of the downlink OLC fast TF restriction. RateRstrctTimerL en and RateRecoverTime rLen are effective only to the downlink. The uplink fast TF restriction is performed by the This parameter specifies the BEG name of the FORWARD(M rollback point. andatory) The target String Type BEG rollback point ROLLBACK(M must exist and andatory) must be subsequent to the current point.
1~65535
RBPNAME
0 to 250 characters
8/7/2013
7773267
162734118.xls.ms_office1
This parameter specifies the type of rollback point. LASTRBP LASTRBP(l indicates the last ast rollback point, rollbackpoin BEG which can be set t), LASTRBP, FORWARD(M by the user or the Enumeratio APPOINTR APPOINTR andatory) calculated point n Type BP(appointe BP by the RNC. d APPOINTRBP rollbackpoin indicates the t) rollback point specified by the user.
RBPTYPE
A timer used to wait for the RB Wait RB SET reconfiguration Interval RbRecfgRspT reconfiguration STATETIMER( response from UE Type mr response timer Optional) in the RB procedure.
300~10000 300~10000
8/7/2013
7783267
162734118.xls.ms_office1
A timer to RNC Wait RB SET wait for the RB RbRelRspTm release STATETIMER( release response r response timer Optional) from UE in the RB procedure.
Interval Type
300~10000 300~10000
8/7/2013
7793267
162734118.xls.ms_office1
A timer to RNC SET wait for the RB Wait RB setup RbSetupRspT STATETIMER( setup response response timer mr Optional) from UE in the RB procedure.
Interval Type
300~10000 300~10000
RDC
This parameter ADD specifies the rate Interval IPLOGICPORT down coefficient Type (Optional) of the logical port.
0~100
0~100
8/7/2013
7803267
162734118.xls.ms_office1
This parameter SET specifies the RNCMBMSPA interval between RA(Optional) recounting operations.
Interval Type
1~360
10~3600, step: 10
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the ADD MAC layer and Interval CELLOLC(Opti the rate of user Type onal) data, thus reducing the cell downlink load. This parameter defines the downlink OLC fast TF rate recovery coefficient. The greater this parameter is, the larger the TF restrict effect.
100~200
1~2, step:0.01
8/7/2013
7813267
162734118.xls.ms_office1
This parameter Decrease rate ADD specifies the RECOVERT alarm recover IPLOGICPORT decrease rate HD threshold (Optional) alarm recover threshold.
Interval Type
20~99
20~99
RED
Backup
This parameter ADD specifies whether BRD(Mandator Enumeratio YES, NO to back up the y) n Type board.
YES, NO
8/7/2013
7823267
162734118.xls.ms_office1
SET DRD(Optional) ADD CELLDRD(Opt ional) SET REDIRECTIO N(Optional) ADD CELLREDIRE CTION(Optiona l)
This parameter specifies the target frequency band in the redirection procedure.
Band1, Band2, Band3, Band4, Band5, Band6, Enumeratio Band7, n Type Band8, Band9, DependOn NCell, BandIndNot Used
Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, DependOn NCell, BandIndNot Used
8/7/2013
7833267
162734118.xls.ms_office1
When the UL load state or DL load state of the serving cell is LDR or OLC, a UE may be redirected to another cell according to the traffic type. This parameter SET specifies the REDIRECTIO possibility of N(Optional) Redirection redirecting the Interval RedirFactorO ADD Factor Of LDR UE to another Type fLDR CELLREDIRE cell. When this CTION(Optiona parameter is set to l) 0, the RRC redirection is not performed if the load state on the serving cell is LDR or OLC. LDR indicates basic congestion. OLC indicates overload congestion.
0~100
0~100
8/7/2013
7843267
162734118.xls.ms_office1
When the load of the serving cell is within the normal range, a UE may be redirected to another cell according to the traffic type. This SET parameter REDIRECTIO specifies the N(Optional) possibility of Interval ADD redirecting the Type CELLREDIRE UE to another CTION(Optiona cell. When this l) parameter is set to 0, the RRC redirection is not performed if the load of the serving cell is within the normal range.
0~100
0~100
8/7/2013
7853267
162734118.xls.ms_office1
This parameter specifies whether the RRC redirection algorithm is valid for the specified service. The algorithm is valid only when the RRC redirection switch is enabled and when this parameter is set to OFF, SET ONLY_TO_INT ONLY_TO REDIRECTIO ER_FREQUENC _INTER_F N(Optional) Y or REQUENC ADD Enumeratio ONLY_TO_INT Y, CELLREDIRE n Type ER_RAT. Value ONLY_TO CTION(Optiona OFF indicates _INTER_R l) that RRC AT redirection is not allowed. Value ONLY_TO_INT ER_FREQUENC Y indicates that only the RRC redirection to an inter-frequency neighboring cell is allowed. Value ONLY_TO_INT ER_RAT
RedirSwitch
Redirection Switch
8/7/2013
7863267
162734118.xls.ms_office1
SET DRD(Optional) ADD CELLDRD(Opt ional) SET REDIRECTIO N(Optional) ADD CELLREDIRE CTION(Optiona l)
This parameter specifies the target downlink UARFCN of a cell for RRC redirection.
Interval Type
0~16383
0~16383
8/7/2013
7873267
162734118.xls.ms_office1
This parameter specifies the target uplink UARFCN of a cell for RRC redirection. Depending on the band indication, the value range as shown below: Band1: Common frequencies: [9612-9888] Special frequencies: none Interval Band2: Type Common frequencies: [9262-9538] Special frequencies: {12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287} Band3: Common frequencies: [9371288] Special frequencies: none
SET DRD(Optional) ADD CELLDRD(Opt ional) SET REDIRECTIO N(Optional) ADD CELLREDIRE CTION(Optiona l)
0~16383
0~16383
8/7/2013
7883267
162734118.xls.ms_office1
SET DRD(Optional) ADD CELLDRD(Opt ional) SET REDIRECTIO N(Optional) ADD CELLREDIRE CTION(Optiona l)
This parameter specifies whether the UL frequency of the target cell of redirection needs to be configured. - TRUE: The UL frequency needs to be configured. TRUE, Enumeratio - FALSE: The UL FALSE n Type frequency does not need to be configured. It is configured automatically according to the relationship between UL and DL frequencies.
TRUE, FALSE
8/7/2013
7893267
162734118.xls.ms_office1
This parameter specifies the link Clock source SET Interval REF2MCLKS No. of the clock of output clock CLK(Optional) Type RC source of the output clock.
0~31
0 to 31
8/7/2013
7903267
162734118.xls.ms_office1
This parameter specifies the Backup clock SET backup link No. REF2MCLKS source of CLK(Optional) of the clock RCBAK output clock source of the output clock.
Interval Type
0~31
0 to 31
This parameter Output switch specified the SET REF2MCLKS of 2M output output switch of 2 CLK(Optional) W1 clock 1 MHz output clock 1. This parameter Output switch specified the SET REF2MCLKS of 2M output output switch of 2 CLK(Optional) W2 clock 2 MHz output clock 2.
OFF, ON
OFF, ON
Indicates whether register beared by fach under call SET shock control. Register Bear RegByFachS CALLSHOCKC This function Enumeratio OFF, ON by Fach Switch witch TRL(Optional) only applies n Type under NodeB level or cell level call shock control.
OFF,ON
8/7/2013
7913267
162734118.xls.ms_office1
This parameter specifies re-host policy type for NodeB. The value "REHOSTRIGH TNOW" indicates to perform re-host policy for the NodeB immediately REHOSTRI when the RNC GHNOW(R recovers from ehostRighN RehostRigh disaster. The SET ow), Now, value Re-host Policy POOLPRIMHO "REHOSTDELA Enumeratio REHOSTD RehostDela ReHostPolicy Type STPOLICY(Opt n Type ELAY(Reh y, Y" indicates to ional) ostDelay), RehostWhe perform re-host REHOSTW n policy for the HEN(Rehos NodeB after a tWhen) specified delayed period when the RNC recovers from disaster. The value "REHOSTWHEN " indicates to perform re-host policy for the NodeB at a This timer is started when an AAL2 signaling SET entity sends the AAL2TMR(Opt service user an ional) indication for releasing an AAL2 connection.
Interval Type
2000~6000 2000~6000 0 0
A timer to RNC Relocation SET wait for another Interval RelocAnother another request STATETIMER( relocation request Type Tmr timer Optional) in relocation procedure. A timer to RNC wait for the SET relocation STATETIMER( command Optional) message in relocation procedure.
1~10000
1~10000
Interval Type
1~20000
1~20000
8/7/2013
7923267
162734118.xls.ms_office1
A timer to RNC wait for rnsap SET relocation commit Interval STATETIMER( message in Type Optional) relocation procedure.
1~20000
1~20000
A timer used for SET data forwarding Interval STATETIMER( in relocation Type Optional) procedure.
1~20000
1~20000
A timer to RNC SET wait for Iu release Interval STATETIMER( command in the Type Optional) failed relocation procedure.
1~10000
1~10000
A timer to RNC Relocation Iu wait for the Iu SET release release command Interval RelocIuRelC STATETIMER( command message in Type mdTmr Optional) timer relocation procedure. A timer to RNC wait for mobile SET information STATETIMER( confirmation in Optional) relocation procedure.
1~60000
1~60000
Interval Type
1~10000
1~10000
A timer to RNC wait for the Relocation SET response to PhyCh Interval RelocPhychR STATETIMER( physical channel reconfiguration Type ecfgTmr Optional) reconfiguration in timer relocation procedure. Relocation SET Inter-RAT HO RelocUtranH STATETIMER( completion oCmpTmr Optional) timer A timer to RNC wait for interRAT handover completion in relocation procedure.
1~10000
1~10000
Interval Type
1~20000
1~20000
8/7/2013
7933267
162734118.xls.ms_office1
This timer is started when an AAL2 signaling SET entity sends the AAL2TMR(Opt peer node a ional) request for releasing an AAL2 connection.
Interval Type
2000~6000 2000~6000 0 0
RelThdForD wnGrd
This parameter specifies the threshold of immediate rate reduction after the soft handover failure. The rate reduction of the active set and the SHO retry procedure can be triggered without the intrafrequency reporting event SET reported, when Interval INTRAFREQH the quality of the Type O(Optional) cell in the active set fulfills the following conditions. The formula of direct SHO rate reduction is new > Mbest_cell RelThdForDwnG rd where Mnew: the CPICH Ec/No measurement
-29~29
14.5~14.5,S tep:0.5
8/7/2013
7943267
162734118.xls.ms_office1
REMARK
String Type -
1 to 250 characters
REMARK
Use description
ADD LOADEQ(Man datory) ADD TRMMAP(Opti Use description. onal) ADD TRMFACTOR( Mandatory)
String Type -
1~31 characters
RepeatNum
Repeat Number
Interval Type
0~65535
0~65535
SET Repeat Period of Interval RepeatPeriod Repeat Period RNCCBPARA( send WriteType Optional) Replace.
1~4096
1~4096
8/7/2013
7953267
162734118.xls.ms_office1
This parameter specifies the reporting period of event 1A. That is, event 1A is reported at each reporting interval. Usually, event 1A is reported only once. Nevertheless, if the cell, where NON_PERI event 1A is ADD ODIC_REP reported, does not CELLINTRAF ORT, join the active set REQHO(Option D250~1 in a specified al) Enumeratio D500~2 period of time, SET n Type D1000~3 the UE can INTRAFREQH D2000~4 change the O(Optional) D4000~5 reporting of event D8000~6 1A into periodical D16000 mode.to avoid missing of measurement reports. The event 1A of this cell is reported for [PeriodMRReport Numfor1A] times with the reporting interval as the set value.
NON_PERI ODIC_REP ORT, 250, 500, 1000, 2000, 4000, 8000, 16000
8/7/2013
7963267
162734118.xls.ms_office1
This parameter specifies the number of reporting times of event 1C for periodical reporting. That is, event 1C is reported at each reporting interval. Usually, event 1C is reported only NON_PERI once. ADD ODIC_REP Nevertheless, if CELLINTRAF ORT, the cell, where REQHO(Option D250~1 event 1C is al) Enumeratio D500~2 reported, does not SET n Type D1000~3 join the active set INTRAFREQH D2000~4 in a specified O(Optional) D4000~5 period of time, D8000~6 the UE can D16000 change the reporting of event 1C into periodical mode.to avoid missing of measurement reports. The event 1C of this cell is reported for [PeriodMRReport Numfor1C] times
NON_PERI ODIC_REP ORT, 250, 500, 1000, 2000, 4000, 8000, 16000
8/7/2013
7973267
162734118.xls.ms_office1
This parameter specifies the number of reporting times of event 1J for periodical reporting. That is, event 1J is reported at each reporting interval. Usually, event 1J is reported only NON_PERI once. ADD ODIC_REP Nevertheless, if CELLINTRAF ORT, the cell, where REQHO(Option D250~1 event 1J is al) Enumeratio D500~2 reported, does not SET n Type D1000~3 join the EDCH INTRAFREQH D2000~4 active set in a O(Optional) D4000~5 specified period D8000~6 of time, the UE D16000 can change the reporting of event 1J into periodical mode.to avoid missing of measurement reports. The event 1J of this cell is reported for [PeriodMRReport Numfor1J] times
NON_PERI ODIC_REP ORT, 250, 500, 1000, 2000, 4000, 8000, 16000
8/7/2013
7983267
162734118.xls.ms_office1
Req2GCap
Required 2G Capability
This parameter specifies the 2G cell capability required by interRAT handovers from 3G networks to 2G networks. If the 2G cell capability does not meet the requirement, the handover is not ADD performed. In GSM, TYPRABBASI terms of the Enumeratio GPRS, C(Mandatory) ability to support n Type EDGE PS services, EDGE cells rank first, GPRS cells second, and GSM cells third. When the PS service is handed over to a 2G network, the service is set up at the closest rate that the 2G network supports.
8/7/2013
7993267
162734118.xls.ms_office1
SET CORRM Algo CORRMALGO ReservedSwit reserved switch SWITCH(Optio ch0 0 nal)
CORRM Algo reserved switch 0. The switch is Bit Field reserved for Type further change request use.
RESERVE D_SWITC H_0_BIT1, RESERVE D_SWITC H_0_BIT2, RESERVE D_SWITC H_0_BIT3, RESERVE D_SWITC H_0_BIT4, RESERVE D_SWITC H_0_BIT5, RESERVE D_SWITC H_0_BIT6, RESERVE D_SWITC H_0_BIT7, RESERVE D_SWITC H_0_BIT8, RESERVE D_SWITC H_0_BIT9, RESERVE D_SWITC H_0_BIT10 ,
RESERVE D_SWITC H_0_BIT1, RESERVE D_SWITC H_0_BIT2, RESERVE D_SWITC H_0_BIT3, RESERVE D_SWITC H_0_BIT4, RESERVE D_SWITC H_0_BIT5, RESERVE D_SWITC H_0_BIT6, RESERVE D_SWITC H_0_BIT7, RESERVE D_SWITC H_0_BIT8, RESERVE D_SWITC H_0_BIT9, RESERVE D_SWITC H_0_BIT10 ,
8/7/2013
8003267
162734118.xls.ms_office1
SET CORRM Algo CORRMALGO ReservedSwit reserved switch SWITCH(Optio ch1 1 nal)
CORRM Algo reserved switch 1. The switch is Bit Field reserved for Type further change request use.
RESERVE D_SWITC H_1_BIT1, RESERVE D_SWITC H_1_BIT2, RESERVE D_SWITC H_1_BIT3, RESERVE D_SWITC H_1_BIT4, RESERVE D_SWITC H_1_BIT5, RESERVE D_SWITC H_1_BIT6, RESERVE D_SWITC H_1_BIT7, RESERVE D_SWITC H_1_BIT8, RESERVE D_SWITC H_1_BIT9, RESERVE D_SWITC H_1_BIT10 ,
RESERVE D_SWITC H_1_BIT1, RESERVE D_SWITC H_1_BIT2, RESERVE D_SWITC H_1_BIT3, RESERVE D_SWITC H_1_BIT4, RESERVE D_SWITC H_1_BIT5, RESERVE D_SWITC H_1_BIT6, RESERVE D_SWITC H_1_BIT7, RESERVE D_SWITC H_1_BIT8, RESERVE D_SWITC H_1_BIT9, RESERVE D_SWITC H_1_BIT10 ,
SET CORRM Algo CORRMALGO ReservedU32 reserved U32 SWITCH(Optio Para0 Para 0 nal)
CORRM Algo reserved U32 para 0. The para of 32 Interval bits is reserved Type for further change request use. CORRM Algo reserved U32 para 1. The para of 32 Interval bits is reserved Type for further change request use. CORRM Algo reserved U8 para 0. The para of 8 Interval bits is reserved Type for further change request use.
SET CORRM Algo CORRMALGO ReservedU32 reserved U32 SWITCH(Optio Para1 Para 1 nal)
SET CORRM Algo CORRMALGO ReservedU8P reserved U8 SWITCH(Optio ara0 Para 0 nal)
0~255
0~255
8/7/2013
8013267
162734118.xls.ms_office1
SET CORRM Algo CORRMALGO ReservedU8P reserved U8 SWITCH(Optio ara1 Para 1 nal)
CORRM Algo reserved U8 para 1. The para of 8 Interval bits is reserved Type for further change request use.
0~255
0~255
This timer is started when an AAL2 signaling SET Reset request entity sends the RESREQTM AAL2TMR(Opt timer peer node a R ional) request for resetting an AAL2 path.
Interval Type
2000~6000 2000~6000 0 0
RESTARTT MR
ADD PPPLNK(Optio son-protocol nal) confer out time ADD MPLNK(Option al)
This parameter specifies the time Interval length to restart Type the timer for the PPP link.
2~5
2 to 5
8/7/2013
8023267
162734118.xls.ms_office1
This parameter specifies the filter ADD coefficient for Interval TYPRABRLC( retransmission Type Optional) ratio measurement.
0~10
0~10
Each bit indicates whether to retry the corresponding HSPA technology. If a bit is set the 1, then the RNC retries the SET Bit Field corresponding FRC(Optional) Type HSPA technology if the UE is not using the corresponding HSPA technology. Otherwise, no retry is performed.
SRB_OVE R_HSDPA, SRB_OVE R_HSUPA, TTI_2MS, MIMO, None 64QAM, L2_ENHA NCE, DTX_DRX, HSSCCH_L ESS_OPER ATION
8/7/2013
8033267
162734118.xls.ms_office1
This parameter specifies the work mode of RLC entity. - AM: Acknowledged Mode. Automatic Repeat Request (ARQ) is used in error correction. - UM: Unacknowledged Mode. Retransmission is not applied. According to the configuration, the data with errors is discarded or marked. - TM: Transparent Mode. No protocol overhead is added to the higher-layer data. The protocol data units with errors may be discarded or marked. For details of this parameter, refer This parameter defines each transport block size corresponding in transport format. For a common channel, the RLC size reflects the actual transport block size. For detailed information of this parameter, refer to 3GPP TS 25.322.
RlcMode
AM, UM, TM
RLCSize
RLC size
Interval Type
0~4992
0~4992
8/7/2013
8043267
162734118.xls.ms_office1
This parameter should fulfill the coverage requirement of the network planning, and the value is relative to [PCPICH transmit power]. If the parameter is excessively high, ADD Interval downlink CELLRLPWR( interference may Type Mandatory) occur. If the parameter is excessively low, the downlink power control may be affected. For detailed information of this parameter, refer to 3GPP TS 25.433.
RlMaxDlPwr
RL Max DL TX power
-350~150
-35~15, step:0.1
8/7/2013
8053267
162734118.xls.ms_office1
This parameter should consider the maximum downlink transmit power and the dynamic range of power control, and the value is relative to [PCPICH transmit power]. Since the dynamic range of power control is set to 15 dB, this ADD RL Min DL parameter is RlMinDlPwr CELLRLPWR( TX power recommended as Mandatory) [RL Max DL TX power] - 15 dB. If the parameter value is excessively low, the transmit power may become excessively low because of incorrect estimation of SIR. If the parameter value is excessively high, A timer to RNC wait for the response to radio RL SET link RlRecfgRead reconfiguration STATETIMER( reconfiguration yTmr timer Optional) prepare in the radio link procedure. A timer to RNC wait for the SET response to radio RL release STATETIMER( link deletion RlRelRspTmr timer Optional) request in the radio link procedure.
Interval Type
-350~150
-35~15, step:0.1
Interval Type
1~10000
1~10000
Interval Type
1~10000
1~10000
RlRstrTmr
A timer to RNC wait for radio link SET RL restoration restoration Interval STATETIMER( timer indication in the Type Optional) radio link procedure.
1~10000
1~10000
8/7/2013
8063267
162734118.xls.ms_office1
A timer to RNC wait for the SET RL setup response to radio Interval RlSetupRspT STATETIMER( response timer link setup request Type mr Optional) in the radio link procedure. ADD CELLINTRAF REQHO(Manda tory) ADD INTRAFREQN CELL(Mandato ry) ADD INTERFREQN CELL(Mandato ry) ADD GSMNCELL(M Uniquely andatory) identifying an ADD RNC. SMLCCELL(M andatory) RST IUR(Mandatory ) ADD RNCBASIC(M andatory) ADD GPS(Mandatory ) RST RNC(Mandator y)
1~10000
1~10000
RNCId
RNC ID
Interval Type
0~4095
0~4095
ADD CBS RNC IP IP address of the IP Address RNCIPADD CBSADDR(Ma address RNC. Type R ndatory)
0.0.0.0~255 .255.255.25 5
ADD RNCPOOL(Ma ndatory) Interval RncPool Index ADD RNC pool index. RncPoolIndex Type RNCPOOLME MBER(Mandat ory)
8/7/2013
8073267
162734118.xls.ms_office1
1~20 charaters
RncProtclVer
ADD Neighboring RNC protocol NRNC(Mandat RNC protocol version ory) version.
R99, R4, R99, R4, Enumeratio R5, R6, R7 R5, R6, R7 n Type
RPTTHD
This parameter Decrease rate ADD specifies the alarm report IPLOGICPORT decrease rate threshold (Optional) alarm report threshold.
Interval Type
20~99
20~99
8/7/2013
8083267
162734118.xls.ms_office1
RrcCause
This parameter specifies the cause of RRC connection establishment, Cause of RRC SET that is, the value connection RRCESTCAUS of the establishment E(Mandatory) Establishment cause IE in the RRC CONNECTION REQUEST message.
ORIGCON VCALLES T, ORIGSTRE AMCALLE ST, ORIGINTE RCALLES T, ORIGBKG CALLEST, ORIGSUBS TRAFFCA LLEST, TERMCON Enumeratio VCALLES n Type T, TERMSTR EAMCALL EST, TERMINT ERCALLE ST, TERMBKG CALLEST, EMERGCA LLEST, INTERRAT CELLRESE LEST, INTERRAT
ORIGCON VCALLES T, ORIGSTRE AMCALLE ST, ORIGINTE RCALLES T, ORIGBKG CALLEST, ORIGSUBS TRAFFCA LLEST, TERMCON VCALLES T, TERMSTR EAMCALL EST, TERMINT ERCALLE ST, TERMBKG CALLEST, EMERGCA LLEST, INTERRAT CELLRESE LEST, INTERRAT
The minimum number of RRC connection request per SPU to report KPI alarm. In a checking period,if the number of RRC connection SET request is higher Interval KPIALMTHD( than the threshold Type Optional) and the RRC connnection setup successful ratio is lower than the related threshold,the KPI alarm of RRC connection setup ratio is reported.
0~65534
0~65534
8/7/2013
8093267
162734118.xls.ms_office1
Threshold of RRC connection setup successful ratio per SPU to report KPI alarm. In a checking Threshold of period,if the ratio RRC SET is lower than this RrcConnEsta Connection KPIALMTHD( threshold and the bSuccRatioTh Setup Optional) number of RRC d Successful connection Ratio request is higher than the related threshold,the KPI alarm of RRC connection setup ratio is reported. Wait time in RRC connection Wait Time In reject message, RRC SET the time period RrcConnRej Connection STATETIMER( the UE has to WaitTmr Reject Optional) wait before Message repeating the rejected procedure of RRC A timer used to SET wait for initial STATETIMER( direct Optional) transmission.
Interval Type
0~100
0~100
Interval Type
0~15
0~15
Interval Type
1~10000
1~10000
A timer used to SET wait for the Iu Interval STATETIMER( release command Type Optional) message in RRC procedure.
1~10000
1~10000
A timer used to RRC paging SET wait for the RrcPaingTyp type 1 response STATETIMER( response to e1Tmr timer Optional) paging type 1 in RRC procedure. A timer used to retransmit the RRC release SET RRC RrcRelRetran retransmission STATETIMER( CONNECTION Tmr timer Optional) RELEASE message to UE.
Interval Type
1~10000
1~10000
Interval Type
1~5000
1~5000
8/7/2013
8103267
162734118.xls.ms_office1
A timer used to wait for the RRC RLC SET acknowledgement completion RrcRlcAckC STATETIMER( of radio link acknowledgem mpTmr Optional) control (RLC) ent timer completion in RRC procedure. A timer to RNC wait for the RRC security SET response to mode RrcSecrtMod STATETIMER( security mode completion eCmpTmr Optional) command from timer UE in security mode procedure.
Interval Type
1~3000
1~3000
Interval Type
1~10000
1~10000
A timer used to wait for RRC SET RRC UE connection setup Interval RrcUeRspTm STATETIMER( response timer complete message Type r Optional) from UE in RRC procedure.
1~10000
1~10000
This field ADD indicate whether AAL2PATH(M the AAL2PATH andatory) is belong to resource group.
NO, YES
RSCGRPN
Rscgrp No.
Number of the ADD resource group AAL2PATH(M that the andatory) AAL2PATH belongs to.
Interval Type
0~119
0~119
8/7/2013
8113267
162734118.xls.ms_office1
RSCGRPN
Rscgrp No.
Number of the ADD resource group IPPATH(Manda that the IP Path tory) belongs to.
Interval Type
0~119
0~119
This parameter specifies the resource management ADD mode. If the IPLOGICPORT SHARE mode is (Mandatory) adopted, the ADD SHARE, SHARE, logical port can RSCGRP(Mand Enumeratio EXCLUSIV EXCLUSIV be shared by atory) n Type E E multiple ADD operators. If the ATMLOGICPO EXCLUSIVE RT(Optional) mode is adopted, the logical port can be used by only one operator. COMMISSI This parameter ONING(Co LCK specifies the mmissionin COMMISSI CMCTRL(Man reason to lock the Enumeratio g), ONING,UP datory) CM control n Type UPGRADE GRADE,RE rights. (Upgrade), STORE RESTORE( Restore)
RSNDES
Lock Reason
8/7/2013
8123267
162734118.xls.ms_office1
RSPTMR
Timer_NoResponse
Interval Type
CN reset type. 1. ALL_NODES: resetting all CN RST ALL_NOD ALL_NOD nodes. Enumeratio IU(Mandatory) 2. BY_CNID: ES, ES,BY_CNI n Type BY_CNID D resetting the CN nodes specified by [CN ID].
RSTFUN
Restart switch
ON is open this ADD function and OFF Enumeratio OFF, ON OPC(Optional) is not. n Type
OFF, ON
The times of resending the reset message to Times of SET Interval CN after the RstRsndNum resending reset IUTIMERAND Type response is not message to CN NUM(Optional) received upon the expiry of the timer. RSTTYPE Reset Type
0~5
0~5
RST ALL_RNC, RNC Type to be ALL_RNC, IUR(Mandatory Enumeratio SINGLE_R reset. SINGLE_R ) n Type NC NC
8/7/2013
8133267
162734118.xls.ms_office1
RsvdPara1
Reserved Parameter1
SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.
RsvdPara1
Reserved parameter 1
RSVDBIT1 _BIT1, RSVDBIT1 _BIT2, RSVDBIT1 _BIT3, RSVDBIT1 _BIT4, RSVDBIT1 _BIT5, RSVDBIT1 _BIT6, RSVDBIT1 _BIT7, RSVDBIT1 _BIT8, RSVDBIT1 _BIT9, RSVDBIT1 _BIT10, RSVDBIT1 _BIT11, RSVDBIT1 _BIT12, RSVDBIT1 _BIT13, RSVDBIT1 _BIT14, RSVDBIT1 _BIT15, RSVDBIT1
8/7/2013
8143267
162734118.xls.ms_office1
RsvdPara1
Reserved parameter 1
RSVDBIT1 _BIT1, RSVDBIT1 _BIT2, RSVDBIT1 _BIT3, RSVDBIT1 _BIT4, RSVDBIT1 _BIT5, RSVDBIT1 _BIT6, RSVDBIT1 _BIT7, Each bit RSVDBIT1 can be set _BIT8, ON or OFF RSVDBIT1 _BIT9, RSVDBIT1 _BIT10, RSVDBIT1 _BIT11, RSVDBIT1 _BIT12, RSVDBIT1 _BIT13, RSVDBIT1 _BIT14, RSVDBIT1 _BIT15, RSVDBIT1
8/7/2013
8153267
162734118.xls.ms_office1
RsvdPara1
Reserved parameter 1
RSVDBIT1 _BIT1, RSVDBIT1 _BIT2, RSVDBIT1 _BIT3, RSVDBIT1 _BIT4, RSVDBIT1 _BIT5, RSVDBIT1 _BIT6, RSVDBIT1 _BIT7, Each bit RSVDBIT1 can be set _BIT8, ON or OFF RSVDBIT1 _BIT9, RSVDBIT1 _BIT10, RSVDBIT1 _BIT11, RSVDBIT1 _BIT12, RSVDBIT1 _BIT13, RSVDBIT1 _BIT14, RSVDBIT1 _BIT15, RSVDBIT1
8/7/2013
8163267
162734118.xls.ms_office1
RsvdPara1
Reserved parameter 1
ADD CELLALGOS WITCH(Option al) ADD NODEBALGO PARA(Optional ) SET CACALGOSWI TCH(Optional)
The algorithms with the above values represent are as follow: RsvdBit1: Control RTWP Antiinterfence algorithm. RsvdBit2: Legacy hsdpa admission control algorithm Bit Field in MIMO cell. Type RsvdBit3~RsvdBi t16:Reserved Switch. If RsvdBit1 is selected, the corresponding algorithms will be enabled; otherwise, disabled.
RsvdBit1(R eserved Switch 1), RsvdBit2(R eserved Switch 2), RsvdBit3(R eserved Switch 3), RsvdBit4(R eserved Switch 4), RsvdBit5(R eserved Switch 5), RsvdBit6(R eserved Switch 6), RsvdBit7(R eserved Switch 7), RsvdBit8(R eserved Switch 8), RsvdBit9(R eserved Switch 9), RsvdBit10( Reserved Switch 10), RsvdBit11(
RsvdBit1, RsvdBit2, RsvdBit3, RsvdBit4, RsvdBit5, RsvdBit6, RsvdBit7, RsvdBit8, RsvdBit9, RsvdBit10, RsvdBit11, RsvdBit12, RsvdBit13, RsvdBit14, RsvdBit15, RsvdBit16
This parameter SET specifies DEVPATCHPA parameter 1 RA(Optional) reserved for the future use.
ON,OFF
RsvdPara10
Reserved Parameter10
SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.
8/7/2013
8173267
162734118.xls.ms_office1
This parameter SET specifies DEVPATCHPA parameter 10 RA(Optional) reserved for the future use.
Interval Type
RsvdPara11
Reserved Parameter11
SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.
RsvdPara12
Reserved Parameter12
SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.
RsvdPara13
Reserved Parameter13
SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.
RsvdPara14
Reserved Parameter14
SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.
RsvdPara15
Reserved Parameter15
SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.
RsvdPara16
Reserved Parameter16
SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.
8/7/2013
8183267
162734118.xls.ms_office1
RsvdPara2
Reserved Parameter2
SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.
RsvdPara2
Reserved parameter 2
Interval Type
RsvdPara2
Reserved parameter 2
Interval Type
RsvdPara2
Reserved parameter 2
ADD CELLALGOS WITCH(Option al) ADD Reserved NODEBALGO parameter 2. PARA(Optional ) SET CACALGOSWI TCH(Optional) This parameter SET specifies DEVPATCHPA parameter 2 RA(Optional) reserved for the future use.
Interval Type
ON,OFF
RsvdPara3
Reserved Parameter3
SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.
8/7/2013
8193267
162734118.xls.ms_office1
ADD CELLALGOS WITCH(Option al) ADD Reserved NODEBALGO parameter 3. PARA(Optional ) SET CACALGOSWI TCH(Optional) This parameter SET specifies DEVPATCHPA parameter 3 RA(Optional) reserved for the future use.
RsvdPara3
Reserved parameter 3
Interval Type
ON,OFF
RsvdPara4
Reserved Parameter4
SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.
This parameter SET specifies DEVPATCHPA parameter 4 RA(Optional) reserved for the future use.
ON,OFF
RsvdPara5
Reserved Parameter5
SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.
This parameter SET specifies DEVPATCHPA parameter 5 RA(Optional) reserved for the future use.
ON,OFF
8/7/2013
8203267
162734118.xls.ms_office1
RsvdPara6
Reserved Parameter6
SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.
This parameter SET specifies DEVPATCHPA parameter 6 RA(Optional) reserved for the future use.
ON,OFF
RsvdPara7
Reserved Parameter7
SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.
This parameter SET specifies DEVPATCHPA parameter 7 RA(Optional) reserved for the future use.
Interval Type
RsvdPara8
Reserved Parameter8
SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.
This parameter SET specifies DEVPATCHPA parameter 8 RA(Optional) reserved for the future use.
Interval Type
RsvdPara9
Reserved Parameter9
SET This parameter is Interval DPUCFGDAT saved for the Type A(Optional) coming usage.
8/7/2013
8213267
162734118.xls.ms_office1
This parameter SET specifies DEVPATCHPA parameter 9 RA(Optional) reserved for the future use.
Interval Type
RT
NONThis parameter REVERTIV SET specifies the Revertive type Enumeratio E, MSP(Optional) revertive type of n Type REVERTIV the MSP function. E
NONREVERTIV E, REVERTIV E
Different types of M3UA local Interval entities must have Type different routing contexts.
The rate of RTCP bandwidth by the Iu CS bandwidth. For RATE OF ADD example if this Interval RTCPBWRat RTCP CNNODE(Opti value is 1, it Type io BANDWIDTH onal) expresses that the allocated RTCP path bandwidth is 1% of the RTP path bandwidth.
1~5
1~5
8/7/2013
8223267
162734118.xls.ms_office1
Timer for state transition from CPC_HSPA to E_FACH of realtime services, used to detect whether a realtime service UE that adopts the CPC technology in CELL_DCH(with CPC_HSPA) Realtime CPC SET state is in stable RtCpc2EFach to E_FACH UESTATETRA Interval low activity state. StateTransTi Transition NSTIMER(Opti Type The too small mer Timer onal) parameter cannot probably confirm that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the real-time service model.
1~65535
1~65535
8/7/2013
8233267
162734118.xls.ms_office1
Timer for state transition from CPC_HSPA to FACH of realtime services, used to detect whether a realtime service UE that adopts the CPC technology in CELL_DCH(with CPC_HSPA) Realtime CPC SET state is in stable to FACH UESTATETRA Interval RtCpc2FState low activity state. Transition NSTIMER(Opti Type TransTimer The too small Timer onal) parameter cannot probably confirm that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the real-time service model.
1~65535
1~65535
8/7/2013
8243267
162734118.xls.ms_office1
Whether to support RTCP function.It is valid only if the Iu interface is CS domain and the transtype is IP. When RTCP switch is on, it takes statistics of the total lost number of RTP packets, the loss ADD rate of RTP CNNODE(Opti packets, the Enumeratio OFF, ON onal) Round Trip Time n Type (RTT), the average delay jitter of packets received over a single IP path via RTCP packets. Analyze the performance statistic of the above objects, overall evaluation the situation of the network. This parameter ADD specifies the BAMIPRT(Man destination IP datory) address.
RTCPSwitch
RTCP SWITCH
OFF,ON
RTDEST
IP Address Type
This parameter ADD specifies the BAMIPRT(Man mask of the datory) destination address.
IP Address Type
8/7/2013
8253267
162734118.xls.ms_office1
Timer for state transition from DCH or HSPA to E_FACH of realtime services, used to detect whether a realtime service UE in CELL_DCH state is in stable Realtime DCH low activity state. SET or HSPA to The too small RtDH2EFach UESTATETRA Interval E_FACH parameter cannot StateTransTi NSTIMER(Opti Type Transition probably confirm mer onal) Timer that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the real-time service model.
1~65535
1~65535
8/7/2013
8263267
162734118.xls.ms_office1
Timer for state transition from DCH or HSDPA to FACH of realtime services, used to check whether the UE in the CELL_DCH state with realtime services is in the stable low activity state. If Realtime DCH the value of this SET or HSPA To parameter is too UESTATETRA Interval RtDH2FState FACH low, whether the NSTIMER(Opti Type TransTimer Transition UE is in the onal) Timer stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the real-time service model.
1~65535
1~65535
Pending time after the traffic D250, volume event 4B D500, RT SET is reported. This D1000, RtDH2FTvm D/HSPA2F 4B UESTATETRA parameter is used Enumeratio D2000, PTAT Pending Time NS(Optional) to prevent too n Type D4000, many traffic D8000, volume events 4B D16000 being reported.
8/7/2013
8273267
162734118.xls.ms_office1
D8, D16, D32, D64, D128, D256, D512, This parameter is D1024, used to check D2k, D3k, whether the UE in D4k, D6k, the low activity D8k, D12k, state. If the UE is RT SET D16k, on DCH or HSPA RtDH2FTvm D/HSPA2F 4B UESTATETRA Enumeratio D24k, channel, the low Thd Threshold NS(Optional) n Type D32k, activity counter D48k, increases by 1 D64k, every time traffic D96k, volume event 4B D128k, is reported. D192k, D256k, D384k, D512k, D768k
8, 16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k
When the traffic volume is below the 4B threshold D0, D10, and remains so D20, D40, for the period D60, D80, specified by this D100, parameter, the D120, event 4B is RT SET D160, reported. This RtDH2FTvm D/HSPA2F 4B UESTATETRA Enumeratio D200, parameter TimeToTrig Time NS(Optional) n Type D240, prevents D320, unnecessary D640, traffic volume D1280, events that are D2560, caused by traffic D5000 volume instability from being triggered.
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
8/7/2013
8283267
162734118.xls.ms_office1
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of realRT SET time services E_FACH2CPC RtEFach2Cpc UESTATETRA from E_FACH to _HSPA 4A TvmThd NS(Optional) HSPA with CPC Threshold technology. If the value of this parameter is too high, congestion may occur over the common channel. This parameter specifies the occurrence time of 4A event for triggering the transition of realtime services from E_FACH to HSPA with CPC technology. This parameter prevents RT SET unnecessary RtEFach2Cpc E_FACH2CPC UESTATETRA reports that are TvmTimeToT _HSPA 4A NS(Optional) caused by traffic rig Time volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, Enumeratio D16k, n Type D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k,
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k
D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
8/7/2013
8293267
162734118.xls.ms_office1
This parameter specifies the threshold of the traffic volume of 4A event for triggering the RT transition of realSET E_FACH2D/H time services RtEFach2DH UESTATETRA SPA 4A from E_FACH to TvmThd NS(Optional) Threshold DCH or HSPA. If the value of this parameter is too high, congestion may occur over the common channel. This parameter specifies the occurrence time of 4A event for triggering the transition of realtime services from E_FACH to DCH or HSPA. This parameter prevents unnecessary RT SET RtEFach2DH reports that are E_FACH2D/H UESTATETRA TvmTimeToT caused by traffic SPA 4A Time NS(Optional) rig volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, Enumeratio D16k, n Type D24k, D32k, D48k, D64k, D96k, D128k, D192k,
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k
D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
8/7/2013
8303267
162734118.xls.ms_office1
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of realRT SET time services RtF2CpcTvm F2CPC_HSPA UESTATETRA from FACH to Thd 4A Threshold NS(Optional) HSPA with CPC technology. If the value of this parameter is too high, congestion may occur over the common channel. This parameter specifies the occurrence time of 4A event for triggering the transition of realtime services from FACH to HSPA with CPC technology. This parameter prevents RT SET unnecessary RtF2CpcTvm F2CPC_HSPA UESTATETRA reports that are TimeToTrig 4A Time NS(Optional) caused by traffic volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, Enumeratio D16k, n Type D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k,
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k
D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
8/7/2013
8313267
162734118.xls.ms_office1
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of realRT SET time services RtF2DHTvm F2D/HSPA 4A UESTATETRA from FACH to Thd Threshold NS(Optional) DCH or HSPA. If the value of this parameter is too high, congestion may occur over the common channel. This parameter specifies the occurrence time of 4A event for triggering the transition of realtime services from FACH to DCH or HSPA. This parameter prevents unnecessary RT SET reports that are RtF2DHTvm F2D/HSPA 4A UESTATETRA caused by traffic TimeToTrig Time NS(Optional) volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, Enumeratio D16k, n Type D24k, D32k, D48k, D64k, D96k, D128k, D192k,
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k
D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
8/7/2013
8323267
162734118.xls.ms_office1
It is used to calculate the round-trip time of the protocol stack and the RTO value. The [RTO alpha value] must ADD be less than the Interval SCTPLNK(Opti [RTO beta value]. Type onal) When [RTO beta value] is a constant, the larger this parameter is set, the less sensitive it becomes to the link delay. It is used to calculate the round-trip time of the protocol stack and the RTO value. The [RTO beta value] must be greater than ADD the [RTO alpha Interval SCTPLNK(Opti value]. When Type onal) [RTO alpha value] is a constant, the larger this parameter is set, the more sensitive it becomes to the link delay.
RTOALPHA
0~100
0~100
RTOBETA
0~100
0~100
RTOINIT
When [RTO max value] and [RTO max value] are constants, the ADD larger this Interval SCTPLNK(Opti parameter is set, Type onal) the longer the time spent in checking if the link works well.
1000~6000 1000~6000 0 0
8/7/2013
8333267
162734118.xls.ms_office1
RTOMAX
When [RTO max value] is a constant, the ADD larger this Interval SCTPLNK(Opti parameter is set, Type onal) the longer the time spent in checking if the link works well.
1000~6000 1000~6000 0 0
RTOMIN
When [RTO max value] is a constant, the ADD larger this Interval SCTPLNK(Opti parameter is set, Type onal) the longer the time spent in checking if the link works well.
1000~6000 1000~6000 0 0
RTX
Route index
ADD Route index, a Interval AAL2RT(Optio logical number of Type nal) the route.
RUS
Rate up step
This parameter ADD specifies the rate Interval IPLOGICPORT up step of the Type (Optional) logical port.
0~1000
0~1000
8/7/2013
8343267
162734118.xls.ms_office1
RUSPRD
This parameter ADD specifies the Interval IPLOGICPORT period of Type (Optional) adjusting the rate up step.
1~100
100~10000
RXBW
Backward bandwidth
This parameter ADD specifies the Interval ATMLOGICPO backward Type RT(Mandatory) bandwidth of the logical port.
10~2810
530~14893 0
RXBW
Backward bandwidth
1~3000000 1~3000000
8/7/2013
8353267
162734118.xls.ms_office1
RxBw
Backward Bandwidth
This parameter is valid only when Transport Resource Group ADD Type is ATM or Interval RSCGRP(Mand Transport Type atory) Resource Group Type is IP and Bandwidth Mode is FULL_DUPLEX.
0~4000000 0~4000000
8/7/2013
8363267
162734118.xls.ms_office1
RXTRFX
ADD SAALLNK(Ma ndatory) ADD AAL2PATH(M Receive traffic andatory) record index of ADD the SAAL link. VPCLCX(Mand atory) ADD IPOAPVC(Opti onal)
Interval Type
100~1999
100~1999
8/7/2013
8373267
162734118.xls.ms_office1
When the time difference between the time when the UE receives a physical frame from the downlink and the time when the UE transmits the physical frame to the uplink becomes greater than a certain threshold, the SET event 6F will be Interval HOCOMM(Opt triggered. Type ional) This parameter is to optimize the power control performance within a time slot, that is, to guarantee that the power control within a time slot is implemented based on all links in the active set. The ideal UE RxTx time difference should
768~1280
768~1280
8/7/2013
8383267
162734118.xls.ms_office1
When the time difference between the time when the UE receives a physical frame from the downlink and the time when the UE transmits the physical frame to the uplink becomes smaller than a certain threshold, the SET event 6G will be Interval HOCOMM(Opt triggered. This Type ional) parameter is to optimize the power control performance within a time slot, that is, to guarantee that the power control within a time slot is implemented based on all links in the active set. The ideal UE RxTx time difference should No. of the SAAL link that bears the ADD CCP.For detailed Interval CCP(Mandatory information of Type ) this parameter, refer to 3GPP TS 25.430.
768~1280
768~1280
SAALLNKN
0~699
0~699
SAALLNKN
No. of the SAAL link.For detailed ADD information of Interval NCP(Mandatory this parameter, Type ) refer to 3GPP TS 25.430.
0~699
0~699
8/7/2013
8393267
162734118.xls.ms_office1
SAALLNKN
This parameter specifies the number of an SAAL link carried on the VCL.
Interval Type
0~699
0 to 699
8/7/2013
8403267
162734118.xls.ms_office1
ADD ADJNODE(Ma ndatory) SAALLNKN Saal Link No. ADD MTP3LNK(Ma ndatory)
Number of the SAAL link Interval bearing the AAL2 Type signaling to the adjacent node.
0~699
0~699
Interface type of the SAAL link.The interface ADD type of links on SAALLNKT Interface type SAALLNK(Ma Iub is UNI. The ndatory) interface type of links on Iu and Iur is NNI. SAAL link connection timer. It is a protection SAAL link SET timer waiting for SAALTMR connection MTP3TMR(Opt a SAAL response timer ional) after a link setup request is sent to SAAL.
UNI, NNI
Interval Type
8/7/2013
8413267
162734118.xls.ms_office1
PLMN-Id, LAC and SAC together compose the Service Area ID (SAI). The SAI is used to define an area composed of one or more cells in the same location area. This area is called Interval service area, Type which indicates the location of a UE to the CN. This parameter is defined by the operator. For detailed information of this parameter, refer to 3GPP TS 23.003.
SAC
ADD SAC(Mandatory ) ADD CELLSETUP( Mandatory) ADD QUICKCELLS ETUP(Mandato ry) ADD CZ(Mandatory)
0~65535
0~65535
Indicating ADD whether the Iub Satellite Trans SATELLITEI NODEB(Option interface supports Enumeratio Ind ND al) satellite n Type transmission.
8/7/2013
8423267
162734118.xls.ms_office1
Timing offset between the SCCPCH and PCCPCH in the cell. As defined by the 25.211 protocol, the PICH timing is 7680 chips prior to its corresponding SCCPCH frame timing. If the offset of the SCCPCH timing ADD from the Interval SCCPCHBASI PCCPCH timing Type C(Optional) is smaller than 30 (x 256 chips), the corresponding CFN decreases by 1. Then, the difference between the PICH CFN and the corresponding SCCPCH CFN is 2. However, in the 25.435 protocol, the PI information and paging message
0~149
0~38144,ste p:256
8/7/2013
8433267
162734118.xls.ms_office1
SCR
This parameter ADD specifies the ATMTRF(Opti average rate. onal) Physical unit: cell/s or kbit/s.
Interval Type
30~117924
30 to 117924
ScrambCode
Scrambling code
Scrambling code of the SCCPCH. 0: primary scrambling code; 1~15: secondary scrambling code. Note: This parameter must be set to the primary scrambling code for the SCCPCH ADD bearing the PCH. Interval SCCPCHBASI It can be set to the Type C(Mandatory) primary scrambling code or secondary scrambling code for the SCCPCH that does not carry the PCH. For detailed information of this parameter, refer to 3GPP TS 25.433.
0~15
0~15
8/7/2013
8443267
162734118.xls.ms_office1
This parameter specifies the state of the scramble SET switch. The E1T1(Optional) setting of this Enumeratio ON, OFF SET parameter should n Type OPT(Optional) be consistent with that at the peer end.
ON, OFF
ADD SCTPLNK(Man datory) ADD M3LNK(Manda tory) Number of the SCTPLNKN SCTP link No. ADD SCTP link. CCP(Mandatory ) ADD NCP(Mandatory )
Interval Type
0~599
0~599
8/7/2013
8453267
162734118.xls.ms_office1
SDAY
Start date
This parameter SET Interval specifies the start TZ(Mandatory) Type date of the DST.
1~31
1 to 31
SDENABLE SD Enable
This parameter SET DISABLE, DISABLE, specifies whether Enumeratio MSP(Optional) ENABLE ENABLE the SD is enabled. n Type
SDSFPRI
Seed
This parameter specifies the SET SDSF Priority priority of the SF MSP(Optional) event and the SD event. Seed of the pseudo-random Seed of the sequence ADD pseudo-random generator. It can IPDL(Mandator sequence prevent idle y) generator period of different NodeBs from overlapping.
HIGH, LOW
Interval Type
0~63
0~63
8/7/2013
8463267
162734118.xls.ms_office1
SelectType
Detect type
This parameter SINGLE(Si specifies the type ngle SINGLE, Enumeratio of the NodeB NodeB), ALL n Type detect. ALL(ALL NodeB)
This parameter indicates whether MBMS_RE ADD the MBMS L(MBMS MBMS_RE CELLOLC(Opti service is released Enumeratio service), L, onal) first or user first n Type USER_REL USER_REL when the overload (UE) occurs.
ServerIP
This parameter ADD specifies the IP FTP Server IP FTPSCLTDPO address to be Address RT(Mandatory) accessed by the FTP client.
IP Address Type
0.0.0.0~255 .255.255.25 5
SERVERNA ME
Server name
This parameter specifies the server name for ADD CHAP PPPLNK(Mand authentication atory) during PPP or MLPPP link negotiation.
String Type -
0 to 63 character
ADD CELLMBMSS CCPCH(Manda tory) SET MBMSSCCPC H(Mandatory) ADD CELLMBMSF ACH(Mandator y) SET MBMSFACH( Mandatory) SET MTCH(Mandat
This parameter specifies the rate of the MBMS service carried on D16, D32, the common 16, 32, 64, Enumeratio D64, D128, channel. For 128, 256 n Type D256 details of this parameter, refer to the 3GPP TS 25.346.
8/7/2013
8473267
162734118.xls.ms_office1
This parameter specifies whether the service differential DRD algorithm will be applied. - ON: The service differential DRD algorithm will be applied.(If cellSET level DRD Service DRD(Optional) parameters are ServiceDiffDr differential drd ADD Enumeratio ON, OFF configured, the dSwitch switch CELLDRD(Opt n Type status of cell level ional) Service differential drd switch should also be considered.) - OFF: The service differential DRD algorithm will not be applied.
ON, OFF
ServiceId
Service ID
Uniquely SET identifying a Interval MBMSPERF(M MBMS service in Type andatory) the PLMN.
ServiceInd
CN domain indication
SUPPORT_ Indicating CS, ADD whether to SUPPORT_ NRNC(Mandat Enumeratio support CS, PS or PS, ory) n Type both domains. SUPPORT_ CS_AND_P S
8/7/2013
8483267
162734118.xls.ms_office1
ADD CELLMBMSS CCPCH(Manda tory) SET MBMSSCCPC H(Mandatory) ADD CELLMBMSF ACH(Mandator y) SET MBMSFACH( Mandatory) SET MTCH(Mandat
ServiceType
Service Type
This parameter specifies the traffic class of the MBMS service STREAMI STREAMI carried on the Enumeratio NG, NG, common channel. n Type BACKGRO BACKGRO For details of this UND UND parameter, refer to the 3GPP TS 25.346.
SGSNFLG
This parameter is valid only when Adjacent Node ADD Type is IUPS.NO SGSN FLAG ADJNODE(Ma means the node is Enumeratio NO, YES ndatory) GGSN, and n Type GGSN need not to configure dpx parameter.
NO, YES
Numbers of incoming calls to be shared when the load exceeds the forwarding threshold. When the CPU usage is between the sharing out SET threshold and CTRLPLNSHA Interval overload REPARA(Optio Type threshold, and nal) number of incoming calls in each second reaches the threshold, new arrival call attempts will be shared out to other SPU.
0~255
0~255
8/7/2013
8493267
162734118.xls.ms_office1
This parameter specifies the sharing type of a NodeB. The value "DEDICATED" indicates that all cells of the NodeB belong to one operator. The value DEDICATE "RANSHARING D(Dedicate ADD " indicates that d), Dedicated, Sharing Type SharingType NODEB(Manda cells of the Enumeratio RANSHAR RANSharin Of NodeB tory) NodeB can n Type ING(RAN g, MOCN belong to Sharing), different MOCN(MO operators, but a CN) cell only belongs to one operator. The value "MOCN"indicate s that every cell of the NodeB can belong to multioperators. Inter-system HCS cell reselection start threshold. When Srxlev of the serving cell is less than this HCS inter-rat ADD parameter, the UE Interval reselection CELLHCS(Opti starts the interType threshold onal) system measurement so that better cells can be selected. For details, refer to 3GPP TS 25.304.
SHCSRat
-53~45
-105~91, step:2
8/7/2013
8503267
162734118.xls.ms_office1
This parameter specifies the handover attribute. If the SERVICE_HO_B ASED_ON_RNC _SWITCH is on, the handover setting of this parameter is HO_TO_G HO_TO_G applied. SM_SHOU SM_SHOU Otherwise, the LD_BE_PE LD_BE_PE handover setting RFORM, RFORM, assigned by the HO_TO_G HO_TO_G CN is applied. ADD SM_SHOU SM_SHOU TYPRABBASI Enumeratio LD_NOT_ LD_NOT_ HO_TO_GSM_S C(Mandatory) n Type BE_PERFO BE_PERFO HOULD_BE_PE RM, RM, RFORM: HO_TO_G HO_TO_G Handover to the SM_SHAL SM_SHAL 2G network is L_NOT_BE L_NOT_BE performed so long _PERFOR _PERFOR as 2G signals are M M available. HO_TO_GSM_S HOULD_NOT_B E_PERFORM: Handover to the 2G network is performed when 3G signals are
SHInd
8/7/2013
8513267
162734118.xls.ms_office1
This parameter specifies the threshold number of the soft handover failures. This parameter determines the reporting times of the events from the cell that fails to join the active set in soft handover, to trigger the rate reduction of the SET active set and the Interval INTRAFREQH attempt to join the Type O(Optional) active set. The smaller the value of this parameter, the easier it is for the cell that fails to join the active set in the load based soft handover to join the active set through the soft handover rate reduction strategy, but the easier it is to
0~63
0~63
8/7/2013
8523267
162734118.xls.ms_office1
This parameter specifies the maximum evaluation period of the soft handover failure. When the rate reduction evaluation is performed on a cell that fails to join the active set, the evaluation timer is started. If Max the cell cannot SET evaluation fulfill the Interval INTRAFREQH ShoFailPeriod period of SHO condition of rate Type O(Optional) failure reduction before the timer expires, the evaluation and rate reduction retry on the cell will not be performed. The larger the value of the parameter, the greater the possibility that the target cell joins the active set. But only three parallel soft
0~120
0~120
8/7/2013
8533267
162734118.xls.ms_office1
When the RNC receives events 1A, 1C and 1D, the target cell can be added to the active set only when CPICH Ec/No of the target cell is higher than this absolute threshold. The purpose for setting this parameter is as follows: The Interval current events of Type soft handovers are defined on the basis of relative thresholds and have no requirement for the absolute quality. If the signal quality of added cells is too poor, the general quality of the active set cannot be obviously improved, but
ADD CELLINTRAF REQHO(Option al) Min quality SET SHOQualmin THD for SHO INTRAFREQH O(Optional) SET SMLC(Mandato ry)
-24~0
-24~0
8/7/2013
8543267
162734118.xls.ms_office1
Indicating whether to trigger soft handover cross the Iur interface between the RNC and the neighboring RNC: 1) CS_SHO_SWITC H. Indicating whether to trigger hard handover for CS cross the Iur interface. 2) HSPA_SHO_SW ITCH. Indicating whether to trigger hard handover for HSPA cross the Iur interface. 3) NON_HSPA_SH O_SWITCH. Indicating whether to trigger hard handover for PS(R99) cross the Flag of whether to include this neighboring relationship in the System Information Block 11 (SIB11). This parameter indicates whether the neighboring cell information is delivered in SIB11. FALSE: not to include the neighboring information in the SIB11. TRUE: to include the neighboring information in the
SHOTRIG
SIB11Ind
SIB11 Indicator
8/7/2013
8553267
162734118.xls.ms_office1
Flag of whether to include this neighboring relationship in the System Information Block 12 (SIB12). This parameter indicates whether the neighboring cell information is delivered in SIB12. FALSE: not to include the neighboring information in the SIB12. TRUE: to include the neighboring information in the Determine whether some system information blocks are broadcast in this cell. If the corresponding system information block is selected, then send this system information block in this cell.
SIB12Ind
SIB12 Indicator
8/7/2013
8563267
162734118.xls.ms_office1
This parameter specifies the channel type and bit rate for RRC connection establishment. - FACH: The RRC connection is set up on the common channel. FACH, DCH_3.4K DCH_3.4K_SIG _SIGNALL NALLING: The ING, RRC connection DCH_6.8K is set up on the SET _SIGNALL 3.4 kbit/s RRCESTCAUS Enumeratio ING, dedicated E(Optional) n Type DCH_13.6 channel. K_SIGNAL LING, DCH_6.8K_SIG DCH_27.2 NALLING: The K_SIGNAL RRC connection LING is set up on the 6.8 kbit/s dedicated channel. DCH_13.6K_SIG NALLING: The RRC connection is set up on the 13.6 kbit/s
SigChType
FACH, DCH_3.4K _SIGNALL ING, DCH_6.8K _SIGNALL ING, DCH_13.6 K_SIGNAL LING, DCH_27.2 K_SIGNAL LING
8/7/2013
8573267
162734118.xls.ms_office1
SIGLKSX
ADD MTP3LKS(Man datory) ADD MTP3LNK(Ma ndatory) ADD MTP3RT(Mand Index of the atory) signalling link ADD set. M3RT(Mandato ry) ADD M3LKS(Mandat ory) ADD M3LNK(Manda tory)
Interval Type
0~118
0~118
SIGLNKID
ADD M3UA link code Signalling link Interval M3LNK(Manda in SPU ID Type tory) subsystem. Indicating ADD Bearing signal whether the FACH(Optional indication FACH bears ) signalling. ADD Signalling link Signalling link MTP3LNK(Ma code code. ndatory)
0~15
0~15
SigRbInd
FALSE, TRUE
SIGSLC
0~15
0~15
8/7/2013
8583267
162734118.xls.ms_office1
WBAMR_ BITRATE_ 6.60K, WBAMR_ BITRATE_ 8.85K, WBAMR_ BITRATE_ 12.65K, WBAMR_ ADD BITRATE_ Maximum rate of Max Mode Of CELLAMRCW 14.25K, the wideband Wideband B(Optional) WBAMR_ SilverMaxMo AMR speech Enumeratio AMRC For SET BITRATE_ de service for silver n Type Silver Users AMRCWB(Opt 15.85K, users. ional) WBAMR_ BITRATE_ 18.25K, WBAMR_ BITRATE_ 19.85K, WBAMR_ BITRATE_ 23.05K, WBAMR_ BITRATE_ 23.85K
8/7/2013
8593267
162734118.xls.ms_office1
NBAMR_B ITRATE_4. 75K, NBAMR_B ITRATE_5. 15K, NBAMR_B ITRATE_5. 90K, ADD Maximum rate of NBAMR_B Max Mode Of CELLAMRC(O the narrowband ITRATE_6. Narrowband ptional) SilverMaxMo AMR speech Enumeratio 70K, AMRC For SET de service for silver n Type NBAMR_B Silver Users AMRC(Optiona users. ITRATE_7. l) 40K, NBAMR_B ITRATE_7. 95K, NBAMR_B ITRATE_1 0.20K, NBAMR_B ITRATE_1 2.20K
This parameter SET specifies the DL D3.4, USERMBR(Opt maximum bit rate Enumeratio D13.6, ional) of signal for PS n Type D27.2 domain user.
This parameter SET specifies the UL D3.4, USERMBR(Opt maximum bit rate Enumeratio D13.6, ional) of signal for PS n Type D27.2 domain user.
8/7/2013
8603267
162734118.xls.ms_office1
SIPADDR
Source IP address
PING IP(Mandatory)
0.0.0.0~255 .255.255.25 5
8/7/2013
8613267
162734118.xls.ms_office1
SIPDL
ADD IMS SRB service Interval TRMFACTOR( downlink factor. Type Optional)
0~100
0~100
8/7/2013
8623267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
SIPPRITH
IMS Signal IMS Signal pri ADD bearing primary path load LOADEQ(Opti path load threshold onal) threshold.
Interval Type
0~100
0~100
8/7/2013
8633267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
ADD IMS SRB IMS SRB SIPSECPAT TRMMAP(Opti secondary path secondary path. H onal)
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
IMS Signal IMS Signal pri ADD primary sec path load LOADEQ(Opti secondary path SIPSECWHT ratio threshold onal) load ratio threshold.
Interval Type
0~100
0~100
8/7/2013
8643267
162734118.xls.ms_office1
SIPUL
IMS SRB ADD IMS SRB service Interval service uplink TRMFACTOR( uplink factor. Type factor Optional)
0~100
0~100
The UE does not start the interRAT measurement if it detects that the quality of the ADD serving cell is Interval CELLHCS(Opti higher than this Type onal) threshold. For detailed information of this parameter, refer to 3GPP TS 25.304.
-16~10
-32~20, step:2
8/7/2013
8653267
162734118.xls.ms_office1
This parameter defines the slot format used by the SCCPCH. The configuration of this parameter is relevant to the SF, pilot bit, and TFCI of the SCCPCH. For detailed information of this parameter, refer to 3GPP TS 25.433 and 3GPP TS 25.211. Sequence number of available PRACH slot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Sequence number of available PRACH slot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Sequence number of available PRACH slot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Sequence number of available PRACH slot formats. For detailed information of this parameter, refer to 3GPP TS 25.211.
SlotFormat
Slot format
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, Enumeratio D10, D11, n Type D12, D13, D14, D15, D16, D17
SlotFormat1
Slot format 1
Interval Type
0~3
0~3
SlotFormat2
Slot format 2
Interval Type
0~3
0~3
SlotFormat3
Slot format 3
Interval Type
0~3
0~3
SlotFormat4
Slot format 4
Interval Type
0~3
0~3
8/7/2013
8663267
162734118.xls.ms_office1
Number of available PRACH ADD slot formats. For PRACHSLOTF detailed D1, D2, Enumeratio ORMAT(Mand information of D3, D4 n Type atory) this parameter, refer to 3GPP TS 25.211. The signalling route mask is used for sharing loads between signalling routes. Suppose that the number of 1s in the value is B0000, expressed as n. B0001, Then the B0010, maximum number B0011, of the routes for B0100, load sharing is B0101, 2^n. For example, B0110, ADD B0000 indicates B0111, N7DPC(Option that only one Enumeratio B1000, al) route can be used n Type B1001, for load sharing. B1010, B0001 and B1000 B1011, indicate that at B1100, most two routes B1101, can be used for B1110, load sharing B1111 while the others cannot. This mask AND the value of [Signalling link mask] specified by ADD MTP3LKS must be zero.
SLSMASK
B0000, B0001, B0010, B0011, B0100, B0101, B0110, B0111, B1000, B1001, B1010, B1011, B1100, B1101, B1110, B1111
8/7/2013
8673267
162734118.xls.ms_office1
This parameter specifies the type of the start date. DATE indicates that the DST DATE(Inpu starts from a t with date), certain day. WEEK(Inpu SET WEEK indicates t with Enumeratio TZ(Mandatory) that the DST week), n Type starts from a DATEWEE certain week. K(Input DATEWEEK with date indicates that the and week) DST starts from a certain day in a certain week. CELLID_C ENTER, CELLID_R TT, OTDOA, AGPS
SM
StartType
This parameter Enable Smoke specifies whether CLOSE(Clo ADD SMOKE_MA Alarm Enumeratio se), CLOSE,OP the alarm EMU(Optional) SK Reporting n Type reporting for OPEN(Ope EN smoke is enabled. n) JAN(Januar y), FEB(Februa ry), MAR(Marc h), APR(April), MAY(May) This parameter , SET specifies the start Enumeratio JUN(June), TZ(Mandatory) month of the n Type JUL(July), DST. AUG(Augu st), SEP(Septe mber), OCT(Octob er), NOV(Nove mber), DEC(Dece
SMONTH
Start month
JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC
8/7/2013
8683267
162734118.xls.ms_office1
SN
Slot No.
This parameter specifies the ACT Interval number of the slot CRC(Optional) Type where the SPU is located. ADD RNCCBCPUID The Slot No. (Mandatory) ADD CBSADDR(Ma ndatory) SET NCELLDETEC TSWITCH(Man datory) RSPU slot No. ADD IURCOMMSC CP(Mandatory) ADD NODEB(Manda tory)
0,2,4,6,8,10
0~10, step: 2
SN
Slot No.
Interval Type
0,2,4,8,10
0,2,4,8,10
SN
Slot No.
Interval Type
0,2,4,8,10
{0},{2},{4} ,{8},{10}
SN
Slot No.
SWP This parameter Interval BRD(Mandator specifies the Type y) number of a slot.
0, 2, 4, 6, 8, 0,2,4,6,8,10, 10, 12, 14, 12,14,16,18, 16, 18, 20, 20,22,24,26 22, 24, 26
SN
Slot No.
This parameter LOP specifies the Interval VCL(Mandator number of the slot Type y) where the SPUa is located.
0,2,4,8,10
0, 2, 4, 8, 10
8/7/2013
8693267
162734118.xls.ms_office1
SN
Slot No.
LOD This parameter Interval PATCH(Option specifies the Type al) number of a slot.
0~27
0 to 27
8/7/2013
8703267
162734118.xls.ms_office1
SN
Slot No.
SET This parameter Interval OPTLOP(Mand specifies the Type atory) number of a slot.
14~27
14 to 27
SN
Slot No.
PING IP(Mandatory)
14~27
14 to 27
SN
Slot No.
ADD BRD(Optional) CLR BRD(Mandator y) STR CPUUSAGETS T(Mandatory) ULD RSTINFO(Man datory)
This parameter specifies the Interval number of a slot Type where the board is located.
0~27
0 to 27
8/7/2013
8713267
162734118.xls.ms_office1
SN
Slot No.
14~27
14 to 27
SN
Slot No.
SET This parameter Interval E1T1(Mandator specifies the Type y) number of a slot.
14~27
14 to 27
SN
Slot No.
ACT MSP(Mandator y) SET MSPCMD(Man datory) CLR MSPREP(Mand This parameter Interval atory) specifies the Type SWP number of a slot. ETHPORT(Ma ndatory) SET MSP(Mandator y) ADD ETHREDPORT (Mandatory)
8/7/2013
8723267
162734118.xls.ms_office1
SN
Slot No.
This parameter INH Interval specifies the BRD(Optional) Type number of a slot.
0~5,8~27
0 to 5,8 to 27
8/7/2013
8733267
162734118.xls.ms_office1
SN
Slot No.
This parameter specifies the number of a slot. For the logical uninhibition, the value range of UIN "Slot No." is Interval BRD(Optional) {{0},{2},{4},{8~ Type 27}}. For the physical uninhibition, the value range of "Slot No." is {{0~5},{8~27}}.
0~5,8~27
0 to 5, 8 to 27
SN
Slot No.
SET This parameter Interval COPTLNK(Ma specifies the Type ndatory) number of a slot.
14~27
14 to 27
8/7/2013
8743267
162734118.xls.ms_office1
ADD PPPLNK(Mand atory) STR IMATST(Mand atory) SET E1T1LOP(Man datory) LOP E1T1(Mandator y) STR E1T1TST(Man datory) This parameter TRC Interval specifies the IPADDR(Mand Type number of a slot. atory) SET CLK(Mandator y) ADD FRALNK(Mand atory) ADD TSCROSS(Man datory) ADD IMAGRP(Mand atory) ADD UNILNK(Mand This parameter indicates the number of the slot ACT where the board is Interval FAN(Mandator located. The Type y) board refers to the one on which the command is executed.
SN
Slot No.
14~27
14 to 27
SN
Slot No.
29,31
29,31
8/7/2013
8753267
162734118.xls.ms_office1
SN
Slot No.
This parameter ACT specifies the slot Interval VCLCC(Manda that holds the Type tory) SPUa.
0,2,4,8,10
0, 2, 4, 8, 10
SN
Slot No.
Number of the ADD SPU slot where Interval SAALLNK(Ma the SAAL link is Type ndatory) terminated.
0,2,4,8,10
0, 2, 4, 8, 10
SN
Slot No.
This parameter is valid only when Adjacent Node Type is ADD UNI_AAL2SWIT Interval ADJNODE(Ma CH.Slot number Type ndatory) of the SAAL link bearing the AAL2 signaling to the adjacent node.
0,2,4,8,10
0, 2, 4, 8, 10
SN
Slot No.
Number of the ADD slot where the SCTPLNK(Man SCTP link is datory) terminated.
Interval Type
0,2,4,8,10
0, 2, 4, 8, 10
8/7/2013
8763267
162734118.xls.ms_office1
SN
Number of the ADD slot where the Interval M3LNK(Manda SPU controlling Type tory) the M3UA link is located. SET Slot Number of PHBMAP(Man PHB map to datory) DSCP. Number of the slot where the ADD SPU subsystem MTP3LNK(Ma controlling the ndatory) MTP3-B link is located.
0,2,4,8,10
0,2,4,8,10
SN
Slot No.
Interval Type
14~27
14~27
SN
Slot No.
Interval Type
0,2,4,8,10
0,2,4,8,10
SNAC
ADD LASNAMAP( Sharing Mandatory) Sharing Network Interval Network Area ADD Area Code. Type Code IMSISNAMAP( Mandatory)
0~65535
0~65535
Indicating whether the SNAC need be configured. TRUE: The SNAC ADD TRUE, SNAC need be SnaExistInd Configuration IMSISNAMAP( Enumeratio FALSE configured. Indication Mandatory) n Type FALSE: The SNAC need not be configured.UE can access any cell of the PLMN.
TRUE,FAL SE
8/7/2013
8773267
162734118.xls.ms_office1
When it is set to ON, the RNC sends UMTS cell load information to the GSM during the noncoverage based system relocation in or out process. When it is set to OFF, the RNC does not send UMTS cell load information to the SET GSM during the INTERRATHO system relocation Enumeratio OFF, ON NCOV(Optional in or out process. n Type ) This parameter is designed for the UMTS network to cooperate with the GSM network. When the UE is handed over from the UMTS network to the GSM network, the RNC normalizes the load information of the best cell and sends it to the The OSP should be input in hexadecimal format and cannot be 0. In addition, it should be allocated in the SS7 network and cannot be repeated. If SPC ADD is BIT14 code, Interval OPC(Optional) the value range is Type H'1~H'3FFF(1~1 6383).f SPC is BIT16 code, the value range is H'1~H'FFFF(1~6 5535). If SPC is BIT24 code, the value range is H'1~H'FFFFFF(1 ~16777215).
OFF, ON
SPC
OSP code
8/7/2013
8783267
162734118.xls.ms_office1
Indicating the number of bits of the OSP code. ADD BIT14 means 14BIT14, OSP code bits OPC(Mandatory bit code,BIT16 Enumeratio BIT16, ) means 16-bit n Type BIT24 code,and BIT24 represents 24-bit code. The OSP should be input in divided number format. In ADD addition, it should String Type OPC(Optional) be allocated in the SS7 network and cannot be repeated.
SPCBITS
SPCDNF
OSP code
1~11 characters
Indicating whether the UE speed estimation is allowed in this cell. Value ON indicates that the UE speed estimation is allowed in this cell. Value OFF indicates that the UE speed Algorithm estimation is not ADD Switch for UE allowed in this CELLHCSHO( Enumeratio ON, OFF SpdEstSwitch speed cell. Optional) n Type estimation The UE speed estimation cannot be triggered even if this switch is enabled in either of the following cases: -The cell is not configured as a HCS cell by ADD CELLHCS or MOD CELLHCS. -The algorithm switch for the RNC-oriented UE
ON,OFF
8/7/2013
8793267
162734118.xls.ms_office1
SPDF
ADD N7DPC(Option Signal point data al) Enumeratio WNF, DNF WNF, DNF format. ADD n Type OPC(Optional)
SPEED
This parameter SET specifies the 10M, FE port speed ETHPORT(Opti Enumeratio transmission rate 100M onal) n Type over the FE port.
10M, 100M
For a highmobility UE, multiples this parameter by its reselection delay to reduce the reselection delay of the UE. This parameter can be Speed set to 10 for dependent ADD SpeedDepend middle-speed UE, Interval scaling factor CELLSELRES entScalingFac which means no Type for reselection EL(Optional) tor influence upon delay reselection delay time. This parameter is not configured when its value is 255. For detailed inforamtion, refer to 3GPP TS 25.304.
0~10,255
{0~1},{255 }, step:0.1
8/7/2013
8803267
162734118.xls.ms_office1
This parameter identifies a group of cells that have specific capabilities for Interval four service types: R99 real- Type time services, R99 non-real-time services, HSPA services, and other services.
SpgId
1~8
1~8
SPI
This parameter indicates the scheduling priority. The Interval value 15 indicates Type the highest priority and the value 0 indicates the lowest.
0~15
0~15
SPORTNO
This parameter STR specifies the Interval IPLOPTST(Ma number of the Type ndatory) source port of the IP loopback test.
1024~3584
1024 to 3584
8/7/2013
8813267
162734118.xls.ms_office1
It is used to decide whether the cell load level is "Heavy" or not. It is denoted by the ratio of NodeB TX power to the maximum TX power. If the load of a cell is equal to or higher than this threshold, the ADD load level of this Interval CELLPUC(Opti cell is heavy. Type onal) If the load level of a cell is heavy, the PUC algorithm will configure selection/reselecti on parameters for this cell to lead the UE camping on this cell to reselect another inter-frequency neighboring cell with light load. Hysteresis used to determine the cell load level. It is denoted by the ratio of NodeB TX power to the maximum TX power. It is used ADD to avoid the Interval CELLPUC(Opti unnecessary pingType onal) pong effect of a cell between two load levels due to tiny load change. For detailed information of this parameter, refer to 3GPP TS 25.304.
SpucHeavy
0~100
0~1, step:0.01
SpucHyst
0~100
0~1, step:0.01
8/7/2013
8823267
162734118.xls.ms_office1
It is used to decide whether the cell load level is "Light" or not. It is denoted by the ratio of NodeB TX power to the maximum TX power. If the load of a cell is equal to or lower than this threshold, the ADD load level of this Interval CELLPUC(Opti cell is light. Type onal) If the load level of a cell is light, the PUC algorithm will configure selection/reselecti on parameters for this cell to lead the UE to reselect this cell rather than the previous inter-frequency neighboring cell
SpucLight
0~100
0~1, step:0.01
The threshold used by SPU process system. When the equivalent user number of this SPU system is over this SET SPU traffic threshold, latter SPUSHARETH SPUShareThd share threshold calls will be D(Optional) transferred to other SPU process system until equivalent user number is bellow this SPU traffic share threshold.
Interval Type
40~100
40~100
8/7/2013
8833267
162734118.xls.ms_office1
This parameter specifies the channel type of SRB. - DCH: Both uplink and downlink are preferably carried on DCH. - HSDPA: Uplink is preferably carried on DCH, and downlink is preferably carried on HS-DSCH. - HSPA: Uplink is preferably carried on EDCH, and downlink is preferably carried This parameter specifies whether [SRB channel type] is valid in the RRC connection setup procedure. - TRUE: [SRB channel type] is valid in the RRC connection setup procedure and other procedures. - FALSE: [SRB channel type] is invalid in the RRC connection setup procedure but valid in other procedures.
DCH(UL_D CH,DL_DC H), DCH, HSDPA(UL Enumeratio HSDPA, _DCH,DL_ n Type HSPA HSDSCH), HSPA(UL_ EDCH,DL_ HSDSCH)
FALSE, TRUE
8/7/2013
8843267
162734118.xls.ms_office1
SRBDL
Interval Type
0~100
0~100
SRBGBR
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Interval Enhanced CELLEFACH( Type CELL_FACH Optional) state, this parameter determines the guaranteed speed of the MAC-c flow that sends SRB data on the Iub interface.
1~1000
1~1000
8/7/2013
8853267
162734118.xls.ms_office1
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Interval Enhanced CELLEFACH( Type CELL_FACH Optional) state, this parameter determines the maximum speed of the MAC-c flow that sends SRB data on the Iub interface.
SRBMBR
1~2000
1~2000
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
8/7/2013
8863267
162734118.xls.ms_office1
SRBPRITH
ADD Signal bearing Signal pri path Interval LOADEQ(Opti primary path load load threshold Type onal) threshold.
0~100
0~100
ADD SRB SRB secondary SRBSECPAT TRMMAP(Opti secondary path path. H onal)
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
Signal primary Signal pri sec ADD secondary path SRBSECWH path load ratio LOADEQ(Opti load ratio T threshold onal) threshold.
Interval Type
0~100
0~100
8/7/2013
8873267
162734118.xls.ms_office1
SRBUL
Interval Type
0~100
0~100
This parameter specifies the source end of ADD Interval timeslot cross TSCROSS(Man Type connection, datory) corresponding to the electrical port of the board. This parameter ADD specifies the Interval CLKSRC(Mand priority level of Type atory) the clock source.
0~31
0 to 31
SRCGRD
1~4
1 to 4
SRCGRD
This parameter SET specifies the type Interval CLKMODE(Ma of the clock Type ndatory) source.
0~4
0 to 4
8/7/2013
8883267
162734118.xls.ms_office1
SRCIP
Source IP
This parameter ADD specifies the IP Address FLOW(Mandat source IP address Type ory) of the flow.
0.0.0.0~255 .255.255.25 5
SRCMEPID
MEP ID
PING MAC(Mandator This parameter y) specifies the ID TRC of a local MEP. MAC(Mandator y)
Interval Type
1~100
1 to 100
SRCT
BITS12MHZ, BITS22MHZ, BITS12MBPS, BITS2This parameter ADD 2MBPS, specifies the type CLKSRC(Mand Enumeratio GPS, of the clock atory) n Type 8KHZ, source. LINE1_8K HZ, LINE2_8K HZ, BITS1T1BPS, BITS2T1BPS
BITS12MHZ, BITS22MHZ, BITS12MBPS, BITS22MBPS, GPS, 8KHZ, LINE1_8K HZ, LINE2_8K HZ, BITS1T1BPS, BITS2T1BPS
8/7/2013
8893267
162734118.xls.ms_office1
SRCTSN
This parameter specifies the ADD number of the TSCROSS(Man source end of datory) timeslot cross connection.
TS1(Time_s lot_1), TS2(Time_s lot_2), TS3(Time_s lot_3), TS4(Time_s lot_4), TS5(Time_s lot_5), TS6(Time_s lot_6), TS7(Time_s lot_7), TS8(Time_s Enumeratio lot_8), n Type TS9(Time_s lot_9), TS10(Time _slot_10), TS11(Time _slot_11), TS12(Time _slot_12), TS13(Time _slot_13), TS14(Time _slot_14), TS15(Time _slot_15), TS16(Time
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
SRECTMR
SRN
Timer REPEAT_SREC. Frequency at which ER is allowed to be ADD Interval received. If the Timer_REPEA SAALLNK(Opt Type second ER T-SREC ional) message is received before the timer expires, the link is released. FMT DATA(Optional ) SET This parameter OFFLINE(Opti specifies the Interval Subrack No. onal) number of the Type SET RBS or RSS. ONLINE(Optio nal) ACT CRC(Optional)
45~90
45~90
0~5
0 to 5
8/7/2013
8903267
162734118.xls.ms_office1
This parameter ADD specifies the SUBRACK(Ma number of a ndatory) subrack. ADD BRD(Mandator y) SET NCELLDETEC TSWITCH(Man datory) SWP BRD(Mandator y) CLR BRD(Mandator y) SET MSPCMD(Man This parameter datory) specifies the CLR number of a MSPREP(Mand subrack. atory) ULD LOGTOBAM( Mandatory) STR CPUUSAGETS T(Mandatory) STR IMATST(Mand atory) SET E1T1LOP(Man datory) LOP
SRN
Subrack No.
Interval Type
1~5
1 to 5
SRN
Subrack No.
Interval Type
0~5
0 to 5
SRN
Subrack No.
This parameter SET specifies the CLK(Mandator number of the y) RBS subrack.
Interval Type
1~5
1 to 5
SRN
Subrack No.
Interval Type
0~5
0 to 5
8/7/2013
8913267
162734118.xls.ms_office1
Number of the ADD subrack where the Interval SAALLNK(Ma SAAL link is Type ndatory) terminated.
SRN
Subrack No.
0~5
0~5
SRN
Subrack No.
This parameter is valid only when Adjacent Node Type is ADD UNI_AAL2SWIT Interval ADJNODE(Ma CH.Subrack Type ndatory) number of the SAAL link bearing the AAL2 signaling to the adjacent node.
0~5
0~5
SRN
Subrack No.
Number of the ADD subrack where the Interval SCTPLNK(Man SCTP link is Type datory) terminated. ADD Number of the RSCGRP(Mand subrack. atory) Number of the SUBRACK ADD where the SPU M3LNK(Manda controlling the tory) M3UA link is located. No. of the SET WRBS at which PHBMAP(Man the PHB map to datory) DSCP. Interval Type
0~5
0~5
SRN
Subrack No.
0~5
0~5
SRN
Interval Type
0~5
0~5
SRN
Subrack No.
Interval Type
0~5
0~5
8/7/2013
8923267
162734118.xls.ms_office1
SRN
Subrack No.
Number of the subrack where the ADD SPU subsystem Interval MTP3LNK(Ma controlling the Type ndatory) MTP3-B link is located.
0~5
0~5
SRName
ADD This parameter Subrack name SUBRACK(Ma specifies the String Type ndatory) name of a WRBS. When the parameter is set to YES, QoS control for DL BE services is based on the TCP and RLC retransmission. SET When the QOSACT(Optio Enumeratio NO, YES parameter is set to nal) n Type NO, QoS control for DL BE services is based on the TCP. In both situations, QoS control is not performed across the Iur interface.
None
NO, YES
SRNS relocationallowed traffic type. This parameter determines the bearing policy over the Iur interface. If the RT(Real parameter is set to time RT, only the realSRNS service), SET time service can relocationNRT(Non SrnsRabCnD SRNSR(Option trigger the static Enumeratio allowed traffic real time omainType al) relocation; if the n Type type service), parameter is set to ALL(All NRT, only the service) non-real-time service can trigger the static relocation; if the parameter is set to ALL, all services can trigger the static relocation.
RT,NRT,A LL
8/7/2013
8933267
162734118.xls.ms_office1
When [Measurement transfer delay by FP Node synchronization between SRNC and DRNC ]+[Estimated nonmeasurement delay offset] > [transfer delay provided by the Qos of the current traffic], the relocation will be Estimated non- SET triggered. The SRNSRDelay measurement SRNSR(Option value of this Offset delay offset al) parameter should be set according to the time delay concerned requirements of the most common services over the Iur interface. If the value is too small, unnecessary relocation will occur; if the value is too large, the QoS of the SRNS relocation expiry time. In order to avoid ping-pong relocation, the SRNS SET user, if SRNSRExpir relocation SRNSR(Option successfully yTime expiry time al) relocated, is not allowed to relocate again in the specified time of the parameter.
Interval Type
0~400
0~400
Interval Type
1~255
1~255
8/7/2013
8943267
162734118.xls.ms_office1
Time interval between two SRNS relocations based on Iur resource optimization. For each time interval, the RNC specifies several UEs to perform the relocation based on Iur resource optimization. The parameter should SET be set according Interval SRNSR(Option to the the time Type al) interval of the Iur source congestion report. The difference between the previous two values cannot be too large. Individually changing a parameter will cause the time difference in the congestion report and the relocation
1~100
1~100
8/7/2013
8953267
162734118.xls.ms_office1
If SRNSR_DSCR_ SEPRAT_DUR_ SWITCH of [SrnsrSwitch] in SET CORRMALGOS WITCH is on, after the separation of the SRNC and the CRNC, a timer starts. After the time is expired, the SRNS SET relocation is Interval SRNSR(Option triggered. This Type al) parameter determines the number of UEs over the Iur interface. If this parameter is set too large, it will cause too much unnecessary occupied Iur resources; if the parameter is set too small, pingpong relocation may occur.
1~255
1~255
8/7/2013
8963267
162734118.xls.ms_office1
SRNSR algorithm switch. 1) SRNSR_DSCR_I UR_RESRCE_S WITCH: When the switch is on, relocation for transmission optimization over the Iur interface is allowed. When there is congestion over SET the Iur interface, CORRMALGO the UE may be Bit Field SWITCH(Optio selected to initiate Type nal) relocation or DSCR if the UE has only a radio link over the Iur interface and the link have the same attributes as the congested link. Based on DSCRInd of ADD NRNC, the RNC decides whether to initiate relocation or DSCR. When the
SrnsrSwitch
SRNSR_DS CR_IUR_R ESRCE_S WITCH, SRNSR_DS CR_LOC_S EPRAT_S WITCH, SRNSR_DS CR_PROP G_DELAY _SWITCH, SRNSR_DS CR_SEPRA T_DUR_S WITCH
SRNSR_DS CR_IUR_R ESRCE_S WITCH, SRNSR_DS CR_LOC_S EPRAT_S WITCH, SRNSR_DS CR_PROP G_DELAY _SWITCH, SRNSR_DS CR_SEPRA T_DUR_S WITCH
8/7/2013
8973267
162734118.xls.ms_office1
Relocation trigger time after IURCCH. The relocation occurs after timeout. This parameter determines the probability of the relocation of the Iur common channel based on time separation. The larger the SET value of this Interval SRNSR(Option parameter, the Type al) more UEs are carried over this Iur channel, and the more Iur resource is occupied; if the value of this parameter is set too small, no UE will be carried on the Iur channel, thus causing the waste of resources.
1~65535
1~65535
SRNTI
SRNTI
Interval Type
0~1048575 0~1048575
8/7/2013
8983267
162734118.xls.ms_office1
SRT
Subrack type
SET This parameter CLK(Mandator specifies the type Enumeratio RSS, RBS y) of the subrack. n Type
RSS, RBS
Offset of the SSCH transmit power from the PCPICH transmit power in a cell. If the value is excessively low, UEs at the edge of cells fail in network searching, resulting in influence on coverage of the SSCH ADD Interval SSCHPower downlink transmit power SSCH(Optional) Type common channel. This finally affects the cell coverage. If the value is excessively high, the power resources are wasted, and other channels are interfered seriously, thus the cell capacity is influenced.
-350~150
8/7/2013
8993267
162734118.xls.ms_office1
This parameter specifies the threshold for clearing an alarm CPU related to the occupancy SET CPU usage. alarm CPUTHD(Optio When the CPU clearance nal) usage is lower threshold than the value of this parameter, the alarm is cleared. This parameter specifies the threshold for reporting an alarm related to the CPU usage. When the CPU usage is higher CPU SET than the value of occupancy CPUTHD(Optio this parameter, alarm threshold nal) the alarm is reported. The value of this parameter must be higher than the value of "CPU occupancy alarm clearance threshold". This parameter specifies the type of source. ADD Source - SPEECH: TYPRABBASI description speech service C(Mandatory) - UNKNOWN: non-speech service
Interval Type
20~99
20 to 99
Interval Type
30~100
30 to 100
Ssd
8/7/2013
9003267
162734118.xls.ms_office1
This parameter specifies the threshold for clearing an alarm SET related to the DSP Interval CPUTHD(Optio usage. When the Type nal) DSP usage is lower than the value of this parameter, the alarm is cleared.
20~99
20 to 99
This parameter specifies the threshold for reporting an alarm related to the DSP usage. When the DSP usage is higher DSP SET than the value of SSDSPMAX Interval occupancy CPUTHD(Optio this parameter, USAGEALM Type alarm threshold nal) the alarm is THD reported. The value of this parameter must be higher than the value of "DSP occupancy alarm clearance threshold".
30~100
30 to 100
8/7/2013
9013267
162734118.xls.ms_office1
Intra-system HCS cell reselection start threshold. When Srxlev of the serving cell is less than this ADD parameter, the UE Interval CELLHCS(Opti starts the intraType onal) frequency and inter-frequency measurements so that better cells can be selected. For details, refer to 3GPP TS 25.304.
-53~45
-105~91, step:2
SsearchRat
Threshold for inter-RAT cell reselection. When the quality (CPICH Ec/No measured by UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the interRAT cell reselection procedure will be started. This Inter-RAT cell ADD parameter is not Interval reselection CELLSELRES configured when Type threshold EL(Optional) its value is 127. This parameter is not configured when its value is 127. The intrafrequency cell reselection has a priority higher than the interfrequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection
8/7/2013
9023267
162734118.xls.ms_office1
SSN
Subsystem No.
This parameter specifies the Interval subsystem No. of Type the SPU/MPU board.
0~3
0 to 3
SSN
Subsystem No.
ADD RNCCBCPUID (Mandatory) ADD NODEB(Option No. of the Interval al) subsystem to set. Type STR CPUUSAGETS T(Mandatory) ULD RSTINFO(Man datory)
0~3
0~3
ST
StartTime
This parameter SET Compound HOUR, specifies the start TZ(Mandatory) Type MIN, SEC time of the DST.
8/7/2013
9033267
162734118.xls.ms_office1
ST
Service type
This parameter specifies the service type. CBR and RTVBR are realtime traffic and are usually carried on the control plane on the Iur, Iub, or IuUBR, CS interface. ADD CBR, NRTVBR and ATMTRF(Man Enumeratio RTVBR, UBR are nondatory) n Type NRTVBR, realtime traffic UBR_PLUS and are usually carried on the user plane and control plane of the Iu-PS interface. UBR_PLUS is usually carried on the OM plane.
When a DCH is set up, the UE starts counting the number of faulty CRCs within a specified sliding window. If the ADD number of faulty Statistic Block TYPRABQUA CRCs exceeds the Interval StaBlkNum5 Number For LITYMEAS(M specified Type A 5A Event andatory) threshold, event 5A is triggered. The length of the sliding window is specified by Statistic Block Number For 5A Event.
1~512
1~512
8/7/2013
9043267
162734118.xls.ms_office1
When the parameter is set to INACTIVE, the timed GPS frame ADD measurement is GPS Frame CELLGPSFRM not activated. Timing Active Enumeratio INACTIVE, INACTIVE, TIMING(Optio When the Flag n Type ACTIVE ACTIVE nal) parameter is set to ACTIVE, the timed GPS frame measurement is activated.
StartFlag
StartTime1
Start time of the ADD first interval when CELLDYNSHU Compound HOUR, the "Cell dynamic TDOWN(Mand Type MIN shutdown" feature atory) is valid.
00:00~23:5 9
StartTime2
Start time of the second interval when the "Cell Compound HOUR, dynamic Type MIN shutdown" feature is valid.
00:00~23:5 9
StartTime3
Start time of the third interval when the "Cell Compound HOUR, dynamic Type MIN shutdown" feature is valid.
00:00~23:5 9
StateIndTmr
Interval Type
1000~3000 1000~3000 00 00
8/7/2013
9053267
162734118.xls.ms_office1
Protection timer Sccp state ind ADD used in case of Interval StateIndTMR protection NRNC(Optional DSP intermittent Type timer ) at the neighboring RNC.
1~300
1~300
STATLEN
MaxSTAT
ADD Maximum length Interval SAALLNK(Opt of the STAT PDU Type ional) list.
3~67
3~67
STP
Indicating whether the ADD signalling point N7DPC(Option can perform the al) signalling transmission function.
OFF, ON
STPMODE
Stop mode
This parameter MANULST STR specifies the P(Manual MANULST CPUUSAGETS mode used to stop Enumeratio stop), P, T(Mandatory) the CPU usage n Type AUTOSTP( AUTOSTP test. Automatic stop) This parameter D0, D8, SET specifies the DL D16, D32, USERMBR(Opt maximum bit rate Enumeratio D64, D128, ional) of streaming for n Type D144, PS domain user. D256, D384 D0, D8, D16, D32, D64, D128, D144, D256, D384
8/7/2013
9063267
162734118.xls.ms_office1
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Streaming ADD Enhanced STREAMGB MAC-c flow CELLEFACH( CELL_FACH R GBR Optional) state, this parameter determines the guaranteed speed of the MAC-c flow that sends streaming service data on the Iub interface. This parameter specifies the rate threshold of 2ms TTI on the EDCH for HSUPA streaming service. When the cell capability and UE Rate threshold capability allows StreamHsupa of Streaming SET 2ms TTI, 2ms 2msTtiRateT on 2ms TTI of FRC(Optional) TTI on the Ehs HSUPA DCH is used if the PS streaming service carried on HSUPA with uplink rate isn't less than this threshold. Otherwise, 10ms TTI is used.
Interval Type
1~1000
1~1000
D8, D16, D32, D64, D128, 8,16,32,64,1 Enumeratio D144, 28,144,256, n Type D256, 384,608 D384, D608
8/7/2013
9073267
162734118.xls.ms_office1
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the ADD Enhanced Interval CELLEFACH( CELL_FACH Type Optional) state, this parameter determines the maximum speed of the MAC-c flow that sends streaming service data on the Iub interface.
1~2000
1~2000
This parameter D0, D8, SET specifies the UL D16, D32, USERMBR(Opt maximum bit rate Enumeratio D64, D128, ional) of streaming for n Type D144, PS domain user. D256, D384 ADD SCCPCHBASI C(Optional) ADD AICH(Optional) ADD PICH(Optional) ADD CELLMBMSS CCPCH(Option al) SET MBMSSCCPC
STTDInd
STTD indicator
This parameter indicates whether the SCCPCH uses STTD or not. For TRUE, detailed Enumeratio FALSE information of n Type this parameter, refer to 3GPP 25.346.
TRUE, FALSE
8/7/2013
9083267
162734118.xls.ms_office1
ADD CELLSETUP(O STTD support ptional) STTDSupInd indicator ADD NRNCCELL(O ptional)
This parameter indicates whether STTD_Sup STTD_Sup STTD TX Enumeratio ported, ported, diversity is n Type STTD_not_ STTD_not_ supported. Supported Supported
This parameter specifies the logical serial number of a subflow for the typical RAB. A bearer may use several subflows for transmission. For example, AMR speech service may use three traffic ADD subflows, which TYPRABOLPC correspond to Service (Mandatory) three transport Interval SubflowIndex subflow index ADD channels. Type TYPRABRLC( Subflows 0, 1, Mandatory) and 2 carry bit flows of classes A, B, and C respectively. For other types of RABs, there is only one subflow. Therefore, the traffic subflow index is set to 0, which corresponds to one transport channel.
0~2
0~2
8/7/2013
9093267
162734118.xls.ms_office1
ADD Max subframe Max subframe SUBFRAME IPPATH(Option length length. LEN al)
Interval Type
16~1023
16~1023
SUBNET
Subnet No.
This parameter specifies the SET subnet number of Interval SUBNET(Mand the internal IP Type atory) address of the RNC.
Indicating ADD whether the cell SupBmc CBS support QUICKCELLS supports the CBS ETUP(Optional) service. This parameter specifies whether the NodeB allows setting of the downlink DPCH spreading factor Support ADD to 512. If this SuppDlSf512 downlink NODEBLMTP parameter is set to DPCH SF 512 ARA(Optional) TRUE, the NodeB allows setting of the downlink DPCH spreading factor to 512.
TRUE, FALSE
FALSE, TRUE
This parameter indicates whether Support DPC ADD to support the FALSE, SuppDpcmod mode Change NRNCCELL(O Enumeratio mode change of TRUE eChgFlag ind ptional) n Type downlink power control (DPC).
FALSE,TR UE
8/7/2013
9103267
162734118.xls.ms_office1
This parameter specifies whether the NodeB supports setting of DPC MODE to TRIPLET. - If this parameter is set to TRUE, the NodeB supports setting of DPC MODE to TRIPLET. - If this parameter is set to FALSE, DPC MODE is always SINGLE. Indicating whether to support establishing IURCCH between the RNC and the neighboring This parameter specifies the board is support backupclock source of the output clock.
FALSE, TRUE
SuppIurCch
ADD NRNC(Optional )
NO, YES
SET CLK(Optional)
NO, YES
8/7/2013
9113267
162734118.xls.ms_office1
CR527_SU PPORT, CR527_NO T_SUPPOR T, CR528_SU ADD CR supported by PPORT, CNNODE(Opti CN protocol Enumeratio CR528_NO onal) version. n Type T_SUPPOR T, CR529_SU PPORT, CR529_NO T_SUPPOR T
CR527_SU PPORT, CR527_NO T_SUPPOR T, CR528_SU PPORT, CR528_NO T_SUPPOR T, CR529_SU PPORT, CR529_NO T_SUPPOR T
Identifying whether the interRAT cell supports PS HO. TRUE indicates that the interInter-RAT cell ADD RAT cell is able SuppPSHOFl support PS HO GSMCELL(Opt to perform the ag indicator ional) handover procedure with relocation. FALSE indicates that the cell is unable to do so. This parameter specifies whether Support PS ADD the NodeB SuppPsRtSer realtime traffic NODEBLMTP supports PS realvOnHsdpa on HSDPA ARA(Optional) time services being carried on HSDPA.
FALSE,TR UE
FALSE, TRUE
8/7/2013
9123267
162734118.xls.ms_office1
Identifying whether the interRAT cell supports RIM. (RIM is used to Inter-RAT cell ADD obtain the SI/PSI FALSE, support RIM GSMCELL(Opt information of the Enumeratio SuppRIMFlag TRUE indicator ional) inter-RAT cell.) n Type For the details of RIM process, refer to the 3GPP TS 25.901 protocol.
FALSE,TR UE
SW
Switch
This parameter SET CLOSE(Clo specifies whether ALMPORT(Opt Enumeratio se), CLOSE,OP to open or close ional) n Type OPEN(Ope EN the port. n)
SWEEK
Start week
SUN(Sunda y), MON(Mon day), TUE(Tuesd This parameter ay), SET specifies the DST Enumeratio WED(Wedn TZ(Mandatory) start day in a n Type esday), week. THU(Thurs day), FRI(Friday) , SAT(Saturd ay)
Switch
Port switch
SET This parameter Close, SCUPORT(Ma specifies the state Enumeratio Open ndatory) of the port switch. n Type SET BFDPROTOS W(Mandatory)
Close,Open
SWITCH
This parameter specifies whether BFD_OFF, Enumeratio BFD_OFF, to turn on the BFD_ON n Type BFD_ON BFD protocol switch.
8/7/2013
9133267
162734118.xls.ms_office1
Whether to support Switch3GPP2541 ADD 5CR0125 Switch3GPP2 Switch3GPP25 CNNODE(Opti Enumeratio OFF, ON function.It is 5415CR0125 415CR0125 onal) n Type valid only if the Iu interface is CS domain.
OFF,ON
This field indicate whether ADD switch back if the SCTPLNK(Opti Enumeratio NO, YES primary IP onal) n Type address is available. This field indicates the association will ADD switch back to Interval SCTPLNK(Opti primary IP Type onal) address after receiving appointed number of HBACK.
NO, YES
1~254
1~254
SET Set patch switch SwitchParame SwitchParamet SS7PATCHSW Enumeratio OFF, ON parameter1. ter1 er1 ITCH(Optional) n Type
OFF ON
8/7/2013
9143267
162734118.xls.ms_office1
SET Set patch switch Interval SwitchParame SwitchParamet SS7PATCHSW parameter10. Type ter10 er10 ITCH(Optional)
0~4294967 0~4294967 29 29
SET Set patch switch SwitchParame SwitchParamet SS7PATCHSW Enumeratio OFF, ON parameter2. ter2 er2 ITCH(Optional) n Type
OFF ON
SET Set patch switch SwitchParame SwitchParamet SS7PATCHSW Enumeratio OFF, ON parameter3. ter3 er3 ITCH(Optional) n Type
OFF ON
SET Set patch switch SwitchParame SwitchParamet SS7PATCHSW Enumeratio OFF, ON parameter4. ter4 er4 ITCH(Optional) n Type
OFF ON
SET Set patch switch SwitchParame SwitchParamet SS7PATCHSW Enumeratio OFF, ON parameter5. ter5 er5 ITCH(Optional) n Type
OFF ON
SET Set patch switch SwitchParame SwitchParamet SS7PATCHSW Enumeratio OFF, ON parameter6. ter6 er6 ITCH(Optional) n Type
OFF ON
8/7/2013
9153267
162734118.xls.ms_office1
SET Set patch switch Interval SwitchParame SwitchParamet SS7PATCHSW parameter7. Type ter7 er7 ITCH(Optional)
0~4294967 0~4294967 29 29
SET Set patch switch Interval SwitchParame SwitchParamet SS7PATCHSW parameter8. Type ter8 er8 ITCH(Optional)
0~4294967 0~4294967 29 29
SET Set patch switch Interval SwitchParame SwitchParamet SS7PATCHSW parameter9. Type ter9 er9 ITCH(Optional)
0~4294967 0~4294967 29 29
SWSEQ
FIRST(First ), This parameter SECOND(S SET specifies the DST econd), Enumeratio TZ(Mandatory) start week in a THIRD(Thi n Type month. rd), FOURTH(F ourth), LAST(Last)
When call shock control starts, the SET AMR_RRC Interval CALLSHOCKC number can be Type TRL(Optional) accessed per second for system.
1~500
1~500
8/7/2013
9163267
162734118.xls.ms_office1
This parameter specifies the String Type method to contact the manufacturer.
1~250 character
SYSDESC
System description
This parameter specifies the SET String Type system SYS(Optional) description of the RNC production. When call shock control starts, the register and 3GSET Interval >2G reselect CALLSHOCKC 1~500 Type number can be TRL(Optional) accessed per second for system. A timer to RNC wait for PS SET RESUME after STATETIMER( successful CS Optional) InterRAT handover. SET SYS(Optional) This parameter specifies the location of the RNC product. This parameter specifies the system ID of the RNC product.
1~250 character
1~500
Interval Type
1~255
1~255
String Type -
1~250 character
SYSOBJECT System ID ID Max RRC_REJ SysRrcRejNu Number per m Second for System
SET SYS(Optional)
String Type -
1~250 character
When call shock SET control starts, it is Interval CALLSHOCKC the max number Type TRL(Optional) of RRC_REJ message.
1~500
1~500
SET SYS(Optional)
This parameter specifies the services provided String Type by the RNC product.
1~250 character
8/7/2013
9173267
162734118.xls.ms_office1
When the RRC REQ total number of one system reach this threshold in period and can't been shared out to other SPU system, the RRC flow control will be triggered. New RRC REQ will be rejected or discarded. Signalling route set test timer. When the reception of a TFP causes unavailability of a route, this timer is started to regularly check whether the route is recovered. Uninhibit acknowledgement timer. It is a protection timer waiting for an uninhibit acknowledgement message (LUA) from the peer end after an uninhibit message (LUN) is sent to the peer end.
System Call SET SysTotalRrcN Shock Trigger CALLSHOCKC umThd Threshold TRL(Optional)
Interval Type
1~500
1~500
T10TMR
Interval Type
30000~600 30000~600 00 00
T12TMR
Interval Type
800~1500
800~1500
T13TMR
Force uninhibit timer. It is a protection timer waiting for a force uninhibit SET Force acknowledgement Interval MTP3TMR(Opt uninhibit timer message (LUA) Type ional) from the peer end after a force uninhibit message (LFU) is sent to the peer end.
800~1500
800~1500
8/7/2013
9183267
162734118.xls.ms_office1
Inhibition acknowledgement timer. It is a protection timer waiting for an inhibition acknowledgement message (LIA) from the peer end after an inhibition message (LIN) is sent to the peer end. Link realignment timer. This timer is started when a link fails to be started. The restart of the link is initiated after it expires. Time-control changeover timer. When a normal changeover cannot be initiated, services will be changed over to an alternative link after this timer expires to avoid disorder of data. Local inhibit test timer. After a local link is inhibited, this timer is started to regularly check the management states at both ends of the link. Remote inhibit test timer. After a remote link is inhibited, this timer is started to regularly check the management states at both ends of the link.
T14TMR
Interval Type
2000~3000 2000~3000
T17TMR
Interval Type
800~1500
800~1500
T1TMR
Interval Type
800~1200
800~1200
T22TMR
Interval Type
T23TMR
Interval Type
8/7/2013
9193267
162734118.xls.ms_office1
Changeover acknowledgement timer. It is a protection timer waiting for an extended SET changeover MTP3TMR(Opt acknowledgement ional) message (XCA) from the peer end after an extended changeover order message (XCO) is sent to the peer end. T300 is started when UE sends the RRC CONNECTION REQUEST message. It is stopped when UE receives the RRC SET CONNECTION IDLEMODETI SETUP message. MER(Optional) RRC CONNECTION REQUEST will be resent upon the expiry of the timer if V300 is lower than or equal to N300, else enter idle
T2TMR
Interval Type
1400~2000 1400~2000
T300
Timer 300
D100, D200, D400, D600, D800, D1000, D1200, Enumeratio D1400, n Type D1600, D1800, D2000, D3000, D4000, D6000, D8000
D100, D200, D400, D600, D800, D1000, D1200, D1400, D1600, D1800, D2000, D3000, D4000, D6000, D8000
8/7/2013
9203267
162734118.xls.ms_office1
T302
Timer 302
T302 is started after the UE transmits the CELL UPDATE/URA UPDATE D100, message and D200, stopped after the D400, UE receives the D600, CELL UPDATE D800, CONFIRM/URA D1000, SET UPDATE D1200, CONNMODET CONFIRM Enumeratio D1400, IMER(Optional) message. CELL n Type D1600, UPDATE/URA D1800, UPDATE will be D2000, resent upon the D3000, expiry of the D4000, timer if V302 less D6000, than or equal to D8000 N302; otherwise, the UE will enter idle mode. Protocol default value is 4000.
D100, D200, D400, D600, D800, D1000, D1200, D1400, D1600, D1800, D2000, D3000, D4000, D6000, D8000
8/7/2013
9213267
162734118.xls.ms_office1
T304 is started after the UE sends the UE CAPABILITY INFORMATION message and stopped after the UE receives the UE CAPABILITY INFORMATION CONFIRM message. UE CAPABILITY INFORMATION will be resent upon the expiry of the timer if V304 less than or equal N304; otherwise the cell update procedure will be initiated. Protocol default value is T305 is started after the UE receives CELL UPDATE CONFIRM/URA UPDATE CONFIRM in CELL_FACH, URA_PCH or CELL_PCH state. It is stopped after the UE enters another state. CELL UPDATE will be transmitted upon the expiry of this timer if T307 is not activated and the UE detects "in service area"; otherwise, T307 will be started. Protocol default value is 30. "Infinity" means the cell will not be updated.
T304
Timer 304
T305
Timer 305
INFINITY, D5, D10, Enumeratio D30, D60, n Type D120, D360, D720
8/7/2013
9223267
162734118.xls.ms_office1
T307 is started after T305 has expired and the UE detects "out of service area". It is stopped after the UE detects "in service area". The UE will enter idle mode upon expiry.Protocol default value is 30. T308 is started after the UE transmits RRC CONNECTION RELEASE COMPLETE. This message will be sent upon the expiry of the Timer if V308 less than or equal to N308, otherwise, the UE will enter idle mode. Protocol default value is T309 is started after the UE is reselected to a cell belonging to another radio access system in connected mode, or the CELL CHANGE ORDER FROM UTRAN message is received. It is stopped after the UE is successfully connected in the new cell. The UE will continue the connection to UTRAN upon expiry. Protocol default value is 5.
T307
Timer 307
T308
Timer 308
D40, D80, D40, D80, Enumeratio D160, D320 D160, D320 n Type
T309
Timer 309
Interval Type
1~8
1~8
8/7/2013
9233267
162734118.xls.ms_office1
T312
Timer 312
T312 is started after the UE starts to establish a DCH and stopped when the UE detects consecutive N312 Interval "in sync" Type indications from L1. It indicates physical channel setup failure upon the expiry of the timer. Protocol default value is 1.
1~15
1~15
T313
Timer 313
T313 is started after the UE detects consecutive N313 "out of sync" indications from L1. T313 is SET stopped after the Interval CONNMODET UE detects Type IMER(Optional) consecutive N315 "in sync" indications from L1.It indicates Radio Link (RL) failure upon expiry. Protocol default value is 3.
0~15
1~15
8/7/2013
9243267
162734118.xls.ms_office1
T314 is started when the criteria for radio link failure are fulfilled and only radio bearers (RBs) associated with T314 exist.T314 is stopped after the Cell Update procedure has been completed. Protocol default value is 12. D0, D2, SET In case of the RL D4, D6, D8, CONNMODET Enumeratio failure when the D12, D16, IMER(Optional) n Type UE is in D20 CELL_DCH state, If the RL cannot be successfully reconfigured by CELL UPDATE CONFIRM before the expiry of the corresponding T314 (or T315), CELL UPDATE will be resent for RL
T314
Timer 314
8/7/2013
9253267
162734118.xls.ms_office1
T315 is started when the criteria for radio link failure are fulfilled, and only the radio bearer associated with T315 exists.T315 is stopped after the Cell Update procedure has been completed. Protocol default value is 180. D0, D10, In case of the RL D30, D60, SET failure when the D180, CONNMODET Enumeratio UE is in D600, IMER(Optional) n Type CELL_DCH D1200, state, T315 (or D1800 T314) is started and CELL UPDATE is sent. If the RL cannot be successfully reconfigured by CELL UPDATE CONFIRM before the expiry of the corresponding T315 (or T314), CELL UPDATE
T315
Timer 315
8/7/2013
9263267
162734118.xls.ms_office1
T316 is started after the UE detects "out of service area" in URA_PCH or CELL_PCH state.T316 is stopped after the UE detects "in service area".The cell update procedure will be D0, D10, SET initiated upon the D20, D30, CONNMODET expiry of the Enumeratio D40, D50, IMER(Optional) timer if "in n Type INFINITY service area" is detected; otherwise, T317 will be started. The UE will enter CELL_FACH state and initiate cell update procedure when the UE detects "in service area". Protocol default
T316
Timer 316
T3212
Periodical location update is implemented by MS through the location update Periodical ADD procedure. 0: The Interval location update CNDOMAIN(O periodical update Type timer ptional) procedure is not used. This parameter is valid only when [CN domain ID] is set as CS_DOMAIN.
0~255
0~1530 step:6
8/7/2013
9273267
162734118.xls.ms_office1
T381 is started after the RNC send message "RRC CONNECTION SETUP"(or "CELL UPDATE CONFIRM"). If T381 expire and RNC does not receive "RRC CONNECTION SETUP COMPLETE"(or the response of SET "ELL UPDATE CONNMODET CONFIRM") and IMER(Optional) V381 is smaller than N381, RNC resend "RRC CONNECTION SETUP"(or "CELL UPDATE CONFIRM") and restart timer T381 and increase V381. If RNC receive "RRC CONNECTION SETUP COMPLETE"(or the response of Time-control changeback timer. When a normal changeback cannot be SET initiated, services MTP3TMR(Opt will be changed ional) back to a normal link only after this timer expires to avoid disorder of data.
T381
Timer 381
D0, D100, D200, D300, D400, D500, D600, Enumeratio D700, n Type D800, D900, D1000, D1200, D1500, D2000
T3TMR
Interval Type
800~1200
800~1200
8/7/2013
9283267
162734118.xls.ms_office1
Changeover acknowledgement first attempt timer. It is a protection timer waiting for a Changeover SET changeback ACK first MTP3TMR(Opt acknowledgement attempt timer ional) message (CBA) from the peer end after the first changeback declaration (CBD) is sent to Changeover acknowledgement second attempt timer. It is a protection timer waiting for a Changeover SET changeback ACK second MTP3TMR(Opt acknowledgement attempt timer ional) message from the peer end after the second changeback declaration (CBD) is sent to the peer end. Transmission prohibited inhibition timer. This timer is activated when a Transmission SET transmission prohibited MTP3TMR(Opt prohibited inhibition timer ional) message (TFP) is sent. The TFP will not be sent any more during the running of this timer.
T4TMR
Interval Type
800~1200
800~1200
T5TMR
Interval Type
800~1200
800~1200
T8TMR
Interval Type
800~1200
800~1200
8/7/2013
9293267
162734118.xls.ms_office1
This parameter specifies the target number of the RLC retransmissions. In the link quality adjust algorithm SET for E-FACH, Target RLC RACHMEASU When the Interval TagetRlcRetr Retransmission REPARA(Optio measured Type ans rate nal) retransmissions are higher than the target number, Ec/N0 should be decreased. Otherwise, Ec/N0 should be increased. Threshold of the target frequency for triggering inter-frequency measurement with measurement quantity of Ec/No for CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGG Interval ER, this Type parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Inter-
1~1000
-24~0
-24~0
8/7/2013
9303267
162734118.xls.ms_office1
Threshold of the target frequency for triggering inter-frequency measurement with measurement quantity of RSCP for CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGG Interval ER, this Type parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Inter-
-115~-25
-115~-25
8/7/2013
9313267
162734118.xls.ms_office1
Threshold of the target frequency for triggering inter-frequency measurement with measurement quantity of Ec/No for PS domain HSPA services. For HSPA services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGG Interval ER, this Type parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Inter-
-24~0
-24~0
8/7/2013
9323267
162734118.xls.ms_office1
Threshold of the target frequency for triggering inter-frequency measurement with measurement quantity of RSCP for PS domain HSPA services. For HSPA services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGG Interval ER, this Type parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Inter-
-115~-25
-115~-25
8/7/2013
9333267
162734118.xls.ms_office1
Threshold of the target frequency for triggering inter-frequency measurement with measurement quantity of Ec/No for PS domain non-HSPA services. For PS domain non-HSPA services, if the value of [Interfrequency measure report Interval mode] is set to Type EVENT_TRIGG ER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this
ADD CELLINTERFR Inter-freq R99 EQHOCOV(Op PS target tional) TargetFreqR9 frequency SET 9PsThdEcN0 trigger Ec/No INTERFREQH THD OCOV(Optional )
-24~0
-24~0
8/7/2013
9343267
162734118.xls.ms_office1
Threshold of the target frequency for triggering inter-frequency measurement with measurement quantity of RSCP for PS domain non-HSPA services. For PS domain non-HSPA services, if the value of [Interfrequency measure report Interval mode] is set to Type EVENT_TRIGG ER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this
ADD CELLINTERFR Inter-freq R99 EQHOCOV(Op PS target tional) TargetFreqR9 frequency SET 9PsThdRscp trigger RSCP INTERFREQH THD OCOV(Optional )
-115~-25
-115~-25
8/7/2013
9353267
162734118.xls.ms_office1
Quality requirement for the inter-RAT cell during an inter-RAT handover with CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGG ER, this parameter is used Interval to set the Type measurement control of event 3A. One of the necessary conditions for triggering event 3A can be met only when the quality of the target frequency is higher than this threshold. The event 3A can be triggered only when the
ADD CELLINTERR Inter-RAT CS ATHOCOV(Op TargetRatCsT handover tional) hd decision THD SET INTERRATHO COV(Optional)
0~63
8/7/2013
9363267
162734118.xls.ms_office1
Quality requirement for the inter-RAT cell during an inter-RAT handover with HSDPA services. For PS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGG ER, this parameter is used Interval to set the Type measurement control of event 3A. One of the necessary conditions for triggering event 3A can be met only when the quality of the target frequency is higher than this threshold. The event 3A can be triggered only when the
ADD CELLINTERR Inter-RAT H ATHOCOV(Op TargetRatHT handover tional) hd decision THD SET INTERRATHO COV(Optional)
0~63
8/7/2013
9373267
162734118.xls.ms_office1
Quality requirement for the inter-RAT cell during an inter-RAT handover with PS domain nonHSDPA services. For PS domain non-HSDPA services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGG Interval ER, this Type parameter is used to set the measurement control of event 3A. One of the necessary conditions for triggering event 3A can be met only when the quality of the target frequency is higher than this threshold. The event 3A can be
ADD CELLINTERR Inter-RAT ATHOCOV(Op R99 PS TargetRatR99 tional) handover PsThd SET decision THD INTERRATHO COV(Optional)
0~63
8/7/2013
9383267
162734118.xls.ms_office1
This parameter specifies the segment number. Segment 1: basic device information Segment 2: connection information Segment 3: module information Segment 4: configuration information EXP Output Segment 5: peer TB DEVFILE(Opti Segment No. device onal) information Segment 6: host version information Segment 7: cabinet information Segment 8: subrack information Segment 9: board and Flash electronic label information Segment 10: slot This parameter specifies the Configured SET number of TBS Count for HSSCCHLESS TbIndexNum transport blocks HS-SCCH OPPARA(Optio in HS-SCCH Less Mode nal) Less Operation mode.
Interval Type
1~12
1~12
8/7/2013
9393267
162734118.xls.ms_office1
This parameter defines the number of the transport blocks corresponding to the TF 1, each transport block size is defined by RLCSize. The parameter value should not be 0 if there is only one TF. For detailed information of this parameter, refer to 3GPP TS 25.302. This parameter defines the number of the transport blocks corresponding to the TF 2, each transport block size is defined by RLCSize. For detailed information of this parameter, refer to 3GPP TS 25.302. This parameter defines the number of the transport blocks corresponding to the TF 3, each transport block size is defined by RLCSize. For detailed information of this parameter, refer to 3GPP TS 25.302.
ADD FACHDYNTFS (Optional) ADD TB number of TbNumber1 PCHDYNTFS( TF1 Optional) ADD RACHDYNTF S(Optional)
Interval Type
0~512
0~512
ADD FACHDYNTFS (Optional) ADD TB number of TbNumber2 PCHDYNTFS( TF2 Optional) ADD RACHDYNTF S(Optional)
Interval Type
0~512
0~512
TbNumber3
Interval Type
0~512
0~512
8/7/2013
9403267
162734118.xls.ms_office1
This parameter D1, D2, specifies the D3, D4, D5, index of the size D6, D7, D8, of a transport D9, D10, block transmitted D11, D12, in HS-SCCH D13, D14, Less Operation D15, D16, mode. The D17, D18, mapping between D19, D20, the index and the D21, D22, transport block D23, D24, size is as follows: D25, D26, 137~1 149~2 D27, D28, 161~3 173~4 D29, D30, SET 185~5 197~6 D31, D32, TB Size Index HSSCCHLESS 209~7 221~8 D33, D34, Enumeratio TbSizeIndex1 1 OPPARA(Optio 233~9 245~10 D35, D36, n Type nal) 257~11 269~12 D37, D38, 281~13 293~14 D39, D40, 305~15 317~16 D41, D42, 329~17 341~18 D43, D44, 353~19 365~20 D45, D46, 377~21 389~22 D47, D48, 401~23 413~24 D49, D50, 425~25 437~26 D51, D52, 449~27 461~28 D53, D54, 473~29 485~30 D55, D56, 497~31 509~32 D57, D58, 521~33 533~34 D59, D60, 545~35 557~36 D61, D62, 569~37 581~38 D63, D64, 593~39 605~40 D65, D66,
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90
8/7/2013
9413267
162734118.xls.ms_office1
This parameter D1, D2, specifies the D3, D4, D5, index of the size D6, D7, D8, of a transport D9, D10, block transmitted D11, D12, in HS-SCCH D13, D14, Less Operation D15, D16, mode. The D17, D18, mapping between D19, D20, the index and the D21, D22, transport block D23, D24, size is as follows: D25, D26, 137~1 149~2 D27, D28, 161~3 173~4 D29, D30, SET 185~5 197~6 D31, D32, TB Size Index HSSCCHLESS 209~7 221~8 D33, D34, Enumeratio TbSizeIndex2 2 OPPARA(Optio 233~9 245~10 D35, D36, n Type nal) 257~11 269~12 D37, D38, 281~13 293~14 D39, D40, 305~15 317~16 D41, D42, 329~17 341~18 D43, D44, 353~19 365~20 D45, D46, 377~21 389~22 D47, D48, 401~23 413~24 D49, D50, 425~25 437~26 D51, D52, 449~27 461~28 D53, D54, 473~29 485~30 D55, D56, 497~31 509~32 D57, D58, 521~33 533~34 D59, D60, 545~35 557~36 D61, D62, 569~37 581~38 D63, D64, 593~39 605~40 D65, D66,
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90
8/7/2013
9423267
162734118.xls.ms_office1
This parameter D1, D2, specifies the D3, D4, D5, index of the size D6, D7, D8, of a transport D9, D10, block transmitted D11, D12, in HS-SCCH D13, D14, Less Operation D15, D16, mode. The D17, D18, mapping between D19, D20, the index and the D21, D22, transport block D23, D24, size is as follows: D25, D26, 137~1 149~2 D27, D28, 161~3 173~4 D29, D30, SET 185~5 197~6 D31, D32, TB Size Index HSSCCHLESS 209~7 221~8 D33, D34, Enumeratio TbSizeIndex3 3 OPPARA(Optio 233~9 245~10 D35, D36, n Type nal) 257~11 269~12 D37, D38, 281~13 293~14 D39, D40, 305~15 317~16 D41, D42, 329~17 341~18 D43, D44, 353~19 365~20 D45, D46, 377~21 389~22 D47, D48, 401~23 413~24 D49, D50, 425~25 437~26 D51, D52, 449~27 461~28 D53, D54, 473~29 485~30 D55, D56, 497~31 509~32 D57, D58, 521~33 533~34 D59, D60, 545~35 557~36 D61, D62, 569~37 581~38 D63, D64, 593~39 605~40 D65, D66,
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90
8/7/2013
9433267
162734118.xls.ms_office1
This parameter specifies the index of the size of a transport block transmitted in HS-SCCH Less Operation mode. The mapping between the index and the transport block size is as follows: 137~1 149~2 161~3 173~4 SET 185~5 197~6 TB Size Index HSSCCHLESS 209~7 221~8 TbSizeIndex4 4 OPPARA(Optio 233~9 245~10 nal) 257~11 269~12 281~13 293~14 305~15 317~16 329~17 341~18 353~19 365~20 377~21 389~22 401~23 413~24 425~25 437~26 449~27 461~28 473~29 485~30 497~31 509~32 521~33 533~34 545~35 557~36 569~37 581~38 593~39 605~40 Used for the MTP3-B to test a link. If the test is successful, the tested link can be used to bear signalling. If failed, the MTP3ADD B periodically TC Test code MTP3LNK(Opt sends a location ional) command until the test is successful. When the link is deleted or deactivated, the MTP3-B stops sending the location command. D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, Enumeratio D35, D36, n Type D37, D38, D39, D40, D41, D42, D43, D44, D45, D46, D47, D48, D49, D50, D51, D52, D53, D54, D55, D56, D57, D58, D59, D60, D61, D62, D63, D64, D65, D66,
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90
Interval Type
1~254
1~254
8/7/2013
9443267
162734118.xls.ms_office1
Difference between the System Frame Number (SFN) and NodeB Frame CHIP0, CHIP0, Number (BFN) of CHIP256, CHIP256, ADD the NodeB which CHIP512, CHIP512, CELLSETUP( the cell belongs CHIP768, CHIP768, Mandatory) to. It is CHIP1024, CHIP1024, ADD Enumeratio recommended CHIP1280, CHIP1280, QUICKCELLS that Tcell of n Type CHIP1536, CHIP1536, ETUP(Mandato difference cells CHIP1792, CHIP1792, ry) under one NodeB CHIP2048, CHIP2048, should be unique. CHIP2304 CHIP2304 For detailed information of this parameter, refer to 3GPP TS 25.433.
TCell
Time offset
TCellId
Target cell ID
0~65535
0~65535
TCLEN
Length of the test ADD code transmitted Interval MTP3LNK(Opt by the signalling Type ional) link.
1~15
1~15
TCRmax
Maximum duration of cell NOT_USE reselection. This D, D30(30 parameter, along seconds), with the [Max D60(60 Time for ADD number of cell seconds), evaluating max CELLHCS(Opti Enumeratio reselection], is D120(120 cell reselection onal) n Type used for rate seconds), evaluation in D180(180 HCS. For details, seconds), refer to 3GPP TS D240(240 25.304. seconds)
8/7/2013
9453267
162734118.xls.ms_office1
NOT_USE D, D10(10 seconds), Time before D20(20 reverting to lowseconds), mobility D30(30 Time before ADD measurement. For seconds), TCrmaxHyst revert to low- CELLHCS(Opti detailed Enumeratio D40(40 mobility meas onal) information of n Type seconds), this parameter, D50(50 refer to 3GPP TS seconds), 25.304. D60(60 seconds), D70(70 seconds) Hysterisis time before non-HCS resuming slow movement. When UE is in highspeed movement, if the number of Non-HCS ADD cell reselections Tcrmaxhystno TCR max CELLSELRES is less than nhcs hysteresis EL(Optional) Ncrnonhcs, the UE resumes to slow movement. For detailed inforamtion, refer to 3GPP TS 25.304. Maximum duration of nonHCS cell reselection. If the number of cell reselection exceed the value ADD of this parameter Non-HCS max Tcrmaxnonhc CELLSELRES during TCR s EL(Optional) Tcrmaxnonhcs, the UE is not in high-speed movement. For detailed inforamtion, refer to 3GPP TS 25.304.
NotUsed, D10(10 seconds), D20(20 seconds), D30(30 seconds), Enumeratio D40(40 n Type seconds), D50(50 seconds), D60(60 seconds), D70(70 seconds)
NotUsed, D30(30 seconds), D60(60 seconds), Enumeratio D120(120 n Type seconds), D180(180 seconds), D240(240 seconds)
8/7/2013
9463267
162734118.xls.ms_office1
Cycle timer for deciding whether the UE is in lowmobility state. This timer provides the time for the RNC to ADD decide whether CELLHCSHO( the UE is in lowOptional) mobility state. Interval SET The smaller the Type HCSHO(Option value is, the more al) frequently the state estimation is triggered. If the parameter is set to 0, it is an indication that the state estimation is not triggered.
0~255
0~255
This parameter specifies whether ADD the alarm EMU(Optional) reporting for temperature is enabled. This parameter Upper Limit specifies the ADD TEMP_THD_ of Temperature upper threshold EMU(Optional) HIGH Alarm for temperature alarm. This parameter Lower Limit specifies the ADD TEMP_THD_ of Temperature lower threshold EMU(Optional) LOW Alarm for temperature alarm. Enable Temperature TEMP_MAS Alarm K Reporting
String Type -
1~9 character
String Type -
1~9 character
8/7/2013
9473267
162734118.xls.ms_office1
Offset of HCS cell CPICH RSCP measurement value in cell selection or reselection. D3~0 D6~1 The larger the D9~2 value of the D12~3 parameter, the 3,6,9,12,15, Enumeratio D15~4 lower the 18,21,INFI n Type D18~5 probability of NITY D21~6 selecting INFINITY neighboring cells. The smaller the value of the parameter, the higher the probability of doing so.
8/7/2013
9483267
162734118.xls.ms_office1
Offset of cell CPICH Ec/No measurement value in cell selection or reselection. The larger the D2~0 D3~1 value of the D4~2 D6~3 parameter, the D8~4 2,3,4,6,8,10, lower the Enumeratio D10~5 12,INFINIT probability of n Type D12~6 Y selecting INFINITY neighboring cells. The smaller the value the parameter, the higher the probability of doing so.
This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of AMR ADD service is set to CELLQUALIT TEN_MSEC. The AMR Event E YMEAS(Option DL code TX Interval TenMsecFor Reporting al) power is reported Type AmrE Period In 10ms SET periodically after QUALITYME the event Ea is AS(Optional) reported. This parameter specifies the reporting period. If the parameter is set to A, the reporting period is A x 10 ms.
1~6000
10~60000, step: 10
8/7/2013
9493267
162734118.xls.ms_office1
This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of BE service is set to TEN_MSEC. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting period. If the parameter is set to A, the reporting period is A x 10 ms. This parameter is valid when the corresponding parameter related to the reporting period unit for the event F of BE service is set to TEN_MSEC. The DL code TX power is reported periodically after the event Fa is reported. This parameter specifies the reporting period. If the parameter is set to A, the reporting period is A x 10 ms.
ADD CELLQUALIT BE Event E YMEAS(Option TenMsecFor Reporting al) BeE Period In 10ms SET QUALITYME AS(Optional)
Interval Type
1~6000
10~60000, step: 10
ADD CELLQUALIT BE Event F YMEAS(Option TenMsecFor Reporting al) BeF Period In 10ms SET QUALITYME AS(Optional)
Interval Type
1~6000
10~60000, step: 10
8/7/2013
9503267
162734118.xls.ms_office1
DL basic common SET measurement LDM(Mandator report cycle. For DL basic meas y) Interval TenMsecFor detailed rprt cycle SET Type DlBasicMeas information of SATLDM(Man this parameter, datory) refer to 3GPP TS 25.433.
1~6000
10~60000, step:10
Measurement report period of SET event E triggered LDM(Mandator by DL OLC. For DL OLC meas y) Interval TenMsecFor detailed rprt cycle SET Type DlOlcMeas information of SATLDM(Man this parameter, datory) refer to 3GPP TS 25.433.
1~6000
10~60000, step:10
This parameter specifies the SET HSDPA bit rate LDM(Mandator measurement TenMsecFor HSDPA bit y) report period. For Interval HsdpaPrvidR rate meas cycle SET detailed Type ateMeas SATLDM(Man information of datory) this parameter, refer to 3GPP TS 25.433.
1~6000
10~60000, step:10
8/7/2013
9513267
162734118.xls.ms_office1
HSDPA power requirement SET measurement LDM(Mandator report period For TenMsecFor HSDPA need y) Interval detailed HsdpaPwrMe pwr meas cycle SET Type information of as SATLDM(Man this parameter, datory) refer to 3GPP TS 25.433.
1~6000
10~60000, step:10
This parameter specifies the HSUPA bit rate measurement SET TenMsecFor HSUPA bit report period. For Interval LDM(Mandator HsupaPrvidR rate meas cycle detailed Type y) ateMeas information of this parameter, refer to 3GPP TS 25.433.
1~6000
10~60000, step:10
8/7/2013
9523267
162734118.xls.ms_office1
Value range: 1~6000 Physical value range: 10 to 60000, step: 10 Physical unit: ms SET Content: UL basic LDM(Mandator common UL basic meas y) Interval TenMsecFor measurement rprt cycle SET Type UlBasicMeas report cycle. For SATLDM(Man detailed datory) information of this parameter, refer to 3GPP TS 25.433. Recommended value: 20
1~6000
10~60000, step:10
Measurement report period of SET event E triggered LDM(Mandator by UL OLC. For UL OLC meas y) Interval TenMsecFor detailed rprt cycle SET Type UlOlcMeas information of SATLDM(Man this parameter, datory) refer to 3GPP TS 25.433.
1~6000
10~60000, step:10
8/7/2013
9533267
162734118.xls.ms_office1
This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of VP service is set to TEN_MSEC. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting period. If the parameter is set to A, the reporting period is A x 10 ms. Time window for estimating whether the UE is in high-mobility state. The start point of the estimation is the moment of the last reporting of event 1D, and the backdated time length is determined by this parameter. If the parameter is set to 0, the RNC does not decide whether the UE is in high-mobility state.
ADD CELLQUALIT VP Event E YMEAS(Option TenMsecFor Reporting al) VpE Period In 10ms SET QUALITYME AS(Optional)
Interval Type
1~6000
10~60000, step: 10
ADD CELLHCSHO( Time window Optional) TFastSpdEst for UE fast SET speed decision HCSHO(Option al)
Interval Type
0~511
0~511
8/7/2013
9543267
162734118.xls.ms_office1
This parameter indicates whether the SCCPCH involves the TFCI. When the downlink blind transport format detection function is used, the TFCI ADD is unavailable. EXISTS, EXISTS, TFCI existing SCCPCHBASI For detailed Enumeratio NOT_EXIS NOT_EXIS TFCIpresence indicator C(Mandatory) information of n Type TS TS this parameter, refer to 3GPP TS 25.433. Note: This parameter is configured only for the SCCPCH in the formats 8 to 17. ADD FACHDYNTFS (Mandatory) ADD PCHDYNTFS( Mandatory) ADD RACHDYNTF S(Mandatory) This parameter defines the number of the transport formats. For detailed Enumeratio D1, D2, D3 1,2,3 information of n Type this parameter, refer to 3GPP TS 25.302.
TFsNumber
Number of TFs
TG
Target BAM
ACTIVE(A SWP Select the target ctive BAMAREA(M BAM to switch Enumeratio BAM), ACTIVE,S andatory) over work area. n Type STANDBY TANDBY (Standby BAM) When a DCH is set up, the UE starts counting the number of faulty CRCs within a specified sliding ADD window. If the TYPRABQUA Interval number of faulty LITYMEAS(M Type CRCs exceeds the andatory) specified threshold, event 5A is triggered. The threshold is Event 5A Threshold.
Thd5A
Event 5A Threshold
1~512
1~512
8/7/2013
9553267
162734118.xls.ms_office1
If DL code TX power is higher than the Ea absolute threshold, event Ea is triggered. This event triggers DL QoS operation. This parameter specifies a relative threshold. Absolute Ea threshold = RL Max DL TX power - ThdEa. If DL code TX power is lower than the Eb absolute threshold, event Eb is triggered. When this event report is received, DL QoS operation is stopped. This parameter specifies a relative threshold. Absolute Eb threshold = RL Max DL TX
ThdEa
Interval Type
0~56
ThdEb
Interval Type
0~56
8/7/2013
9563267
162734118.xls.ms_office1
THP
This parameter specifies the Traffic Handling Priority (THP) of each traffic class SET carried on the SCHEDULEPR logical channel. Interval IOMAP(Mandat The value 1 Type ory) means the highest priority, the value 14 means the lowest priority, and the value 15 means no priority.
1~15
1~15
This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated THP10Class Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 10 l) traffic handling priority 10. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated THP11Class Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 11 l) traffic handling priority 11. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated THP12Class Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 12 l) traffic handling priority 12. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated THP13Class Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 13 l) traffic handling priority 13.
8/7/2013
9573267
162734118.xls.ms_office1
This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated THP14Class Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 14 l) traffic handling priority 14. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated THP15Class Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 15 l) traffic handling priority 15. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 1 l) traffic handling priority 1. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 2 l) traffic handling priority 2. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 3 l) traffic handling priority 3. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 4 l) traffic handling priority 4. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 5 l) traffic handling priority 5.
THP1Class
THP2Class
THP3Class
THP4Class
THP5Class
8/7/2013
9583267
162734118.xls.ms_office1
THP6Class
This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 6 l) traffic handling priority 6. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 7 l) traffic handling priority 7. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 8 l) traffic handling priority 8. This parameter User Class of SET specifies the user High, Traffic IAVUSERTHP class associated Enumeratio Medium, Handler CLASS(Optiona with interactive n Type Low Priority 9 l) traffic handling priority 9.
THP7Class
THP8Class
THP9Class
8/7/2013
9593267
162734118.xls.ms_office1
THPClass
This parameter specifies the Traffic Handling Priority (THP) SET class that the High, USERGBR(Ma THP priority is Enumeratio Medium, ndatory) mapped to. This n Type Low parameter is valid for only interactive services.
TIMEOUT
Reply TimeOut
PING IP(Optional)
Interval Type
200~10000
200 to 10000
TIMEOUT
Time Out
This parameter specifies the time Interval duration of the Type packet.
1~3
1 to 3
Timer
Block time
Specifying the time limitation for BLK blocking a cell Interval CELL(Mandato when normal Type ry) priority is selected.
1~3600
1~3600
8/7/2013
9603267
162734118.xls.ms_office1
Timer_CU timer. Step is 0.05. This ADD parameter will Interval AAL2PATH(O affect the Type ptional) efficiency and delay of AAL2 transmission. This parameter specifies the number of ping packets.
TIMERCU
Timer_CU timer
1~64
1~64
TIMES
PING IP(Optional)
Interval Type
1~1024
1 to 1024
ADD CELLINTERFR Inter-freq EQHOCOV(Op coverage tional) TimeToInterfr handover delay SET eqHO trig time INTERFREQH OCOV(Optional )
This parameter defines the length of the inter-freq coverage handover delay to trig. When the interfreq coverage handover priority of the reported inter-freq measure cells are lower than the highest priority of Interval the measure Type cells,start the inter-freq coverage handover delay timer. When the timer expiry or the priority of the reported cells are equal to the highest priority, start inter-freq handover.
0~1000
0~1000
8/7/2013
9613267
162734118.xls.ms_office1
This parameter specifies the delay time after the RLC entity is ADD Time to start established or Interval TimeToMonit TYPRABRLC( re-TX monitor reconfigured and Type er Optional) before the retransmission ratio monitoring is started.
0~500000
0~500000
Time delay to trigger event 2B. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower probability of D0, D10, incorrect D20, D40, decision, but the D60, D80, slower the D100, response of event D120, 2B to the change D160, of measured Enumeratio D200, signals. n Type D240, Based on the D320, existing D640, emulation result, D1280, the hysteresis D2560, value is set to D5000 effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the
8/7/2013
9623267
162734118.xls.ms_office1
Time delay to trigger event 2D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower probability of D0, D10, incorrect D20, D40, decision, but the D60, D80, slower the D100, response of event D120, 2D to the change D160, of measured Enumeratio D200, signals. n Type D240, Based on the D320, existing D640, emulation result, D1280, the hysteresis D2560, value is set to D5000 effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the
8/7/2013
9633267
162734118.xls.ms_office1
Time delay to trigger the event 2F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower D0, D10, probability of D20, D40, incorrect D60, D80, decision, but the D100, slower the D120, response of event D160, 2F to the change Enumeratio D200, of measured n Type D240, signals. D320, Based on the D640, existing D1280, emulation result, D2560, the hysteresis D5000 value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In
8/7/2013
9643267
162734118.xls.ms_office1
Time delay for triggering handovers to GSM cells with non-verified BSIC. During the period of time specified by this parameter, if the signal quality in a neighboring GSM cell satisfies interRAT handover conditions and the neighboring GSM Interval cell is not Type verified, an interRAT handover is triggered. When the value of this parameter is 65535, the RNC does not perform inter-RAT handovers to nonverified GSM cells. The higher the time-to-trigger parameters are, the smaller the average number
ADD CELLINTERR ATHOCOV(Op tional) Time to SET trigger for nonTimeToTrigF INTERRATHO verified GSM orNonVerify COV(Optional) cell ADD CELLMBDRIN TERRAT(Optio nal)
8/7/2013
9653267
162734118.xls.ms_office1
Time delay for hard handover triggered by periodical reports. Only the interfrequency cell in which the signal quality meets the requirement in all periodical reports during the period of time specified by this parameter can be selected as the target cell in the interInterval frequency Type handover. The larger the value of this parameter, the lower probability of incorrect decision, but the slower the response of the handover to the change of measured signals. Based on the existing emulation result,
ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLMBDRIN TERFREQ(Opti onal)
0~64000
0~64000
8/7/2013
9663267
162734118.xls.ms_office1
Time delay for triggering handovers to GSM cells with verified BSIC. During the period of time specified by this parameter, if the signal quality in a neighboring GSM cell satisfies interRAT handover conditions and the neighboring GSM cell is verified, an Interval inter-RAT Type handover is triggered. The inter-RAT handover conditions are as follows: Mother_RAT + CIO >= Tother_RAT + H/2 If the quality of the GSM neighboring cell meets the preceding
ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional) ADD CELLMBDRIN TERRAT(Optio nal)
0~64000
0~64000
8/7/2013
9673267
162734118.xls.ms_office1
This parameter specifies the time from the moment when the traffic volume of the DCH exceeds the upper threshold to D0, D10, the moment when D20, D40, the traffic-related D60, D80, event 4A on DCH D100, is triggered. This D120, parameter is used D160, to avoid D200, unnecessary D240, ADD reports triggered D320, TYPRABDCC by DCH traffic Enumeratio D640, CMC(Optional) volume n Type D1280, fluctuation. The D2560, larger the value of D5000, this parameter, D10000, the longer the D15000, required duration D20000, of the traffic D25000, volume exceeding D30000 the upper threshold, and the smaller the possibility of triggering trafficrelated event 4A on DCH.
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000, 10000, 15000, 20000, 25000, 30000
8/7/2013
9683267
162734118.xls.ms_office1
This parameter specifies the time from the moment when the traffic volume on the DCH falls below the lower D0, D10, threshold to the D20, D40, moment when the D60, D80, traffic-related D100, event 4B is D120, triggered. This D160, parameter is set to D200, avoid unnecessary D240, ADD reports triggered D320, TYPRABDCC Enumeratio by DCH traffic D640, CMC(Optional) n Type fluctuation. The D1280, larger the value of D2560, this parameter, D5000, the longer the D10000, required duration D15000, of the traffic D20000, volume keeping D25000, below the lower D30000 threshold, and the smaller the possibility of triggering trafficrelated event 4B on DCH. This parameter specifies the number of consecutive periods during which the percentage of ADD retransmitted Interval TYPRABRLC( PDUs is higher Type Optional) than the threshold of event A before event A is triggered. Recommended value (default value): 2.
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000, 10000, 15000, 20000, 25000, 30000
1~100
1~100
8/7/2013
9693267
162734118.xls.ms_office1
This parameter specifies the number of consecutive periods during ADD which the Interval TYPRABRLC( percentage of Type Optional) retransmitted PDUs is lower than the threshold of event B before event B is triggered.
1~100
1~100
TMI
Interval Type
9~163
9~163
TMIBRZ
Index of the traffic mapping ADD used by the ADJMAP(Man current adjacent datory) node's bronze user.
Interval Type
0~163
0~163
TMIGLD
Index of the ADD traffic mapping Interval ADJMAP(Man used by the Type datory) current adjacent node's gold user.
0~163
0~163
8/7/2013
9703267
162734118.xls.ms_office1
TMISLV
Index of the ADD traffic mapping Interval ADJMAP(Man used by the Type datory) current adjacent node's silver user.
0~163
0~163
TMT1TMR
TMT2TMR
Signalling link test acknowledgement timer. It is a protection timer waiting for a SET signalling link Signalling link MTP3TMR(Opt test test ACK timer ional) acknowledgement message (SLTA) from the peer end after a signalling link test message (SLTM) is sent to the peer end. Signalling link repeat test timer. This timer is used Signalling link SET to send the repeat test MTP3TMR(Opt signalling link timer ional) test messages (SLTM) to the peer end regularly.
Interval Type
8000~1200 8000~1200 0 0
Interval Type
30000~900 30000~900 00 00
ADD IUR trans bearer ATM_TRA ATM_TRA NRNC(Mandat Enumeratio type. NS, NS, ory) n Type IP_TRANS IP_TRANS
8/7/2013
9713267
162734118.xls.ms_office1
ATM_TRA NS(ATM circuit transmissio n), IP_TRANS( IP transmissio ADD n), Transport type of NODEB(Option Enumeratio ATMANDI the Iub interface. al) n Type P_TRANS( ATM and IP transmissio n), HYBRID_I P_TRANS( Hybrid IP transmissio n)
8/7/2013
9723267
162734118.xls.ms_office1
TO
This parameter specifies the time SET Interval AdjustMethod offset of the DST TZ(Mandatory) Type from the normal time.
-120~1,1~120
ToAWE
ADD FACH(Mandato ry) ADD Time of PCH(Optional) arrival window ADD endpoint CELLMBMSF ACH(Optional) SET MBMSFACH( Optional)
ToAWS
ADD FACH(Mandato ry) ADD Time of PCH(Optional) arrival window ADD startpoint CELLMBMSF ACH(Optional) SET MBMSFACH( Optional)
A positive value relative to Latest Time of Arrival (LToA). It indicates the endpoint of the arrival time window for a downlink data frame. Normally the downlink data frame arrives before that time.For detailed information of this parameter, refer to 3GPP TS 25.402. A positive value relative to Time of arrival window endpoint (ToAWE). It indicates the startpoint of the arrival time window for a downlink data frame. Normally the downlink data frame arrives after that time.For detailed information of this parameter, refer to 3GPP TS 25.402.
Interval Type
0~2559
0~2559
Interval Type
0~1279
0~1279
8/7/2013
9733267
162734118.xls.ms_office1
The cell will shut down automatically Cell Dynamic only when the ADD ShutDown total user number CELLDYNSHU Interval TotalUserNu Total User is not greater than TDOWN(Optio Type mThd number the threshold. The nal) Threshold total user number consists of the DCH and CCH user numbers.
0~5
0~5
TP
Log type
This parameter specifies the type of the FAM logs to be collected. "Normal" indicates the text logs collected in the \common\fam\fa mlog directory COL NORMAL, under the BAM FAMLOG(Man Enumeratio NORMAL, FORMAT installation datory) n Type FORMAT directory. "Format" indicates the binary FAM logs collected in the \common\fam\fa mlogfmt directory under the BAM installation directory.
8/7/2013
9743267
162734118.xls.ms_office1
TpenaltyHcs Reselect
ADD INTRAFREQN CELL(Optional) HCS Cell ADD Reselect INTERFREQN Penalty Timer CELL(Optional) ADD GSMNCELL(O ptional)
HCS cell reselection penalty timer. The larger the value of the D0, D10, parameter, the D20, D30, longer the HCS Enumeratio D40, D50, penalty time. The n Type D60 smaller the value of the parameter, the shorter the HCS penalty time.
0,10,20,30,4 0,50,60
TrafficClass
Traffic Class
TrafficClass
Traffic Class
This parameter specifies the CONVERS CONVERS traffic class. ATIONAL, ATIONAL, Based on Quality ADD STREAMI STREAMI of Service (QoS), TYPRABBASI there are four Enumeratio NG, NG, C(Mandatory) traffic classes: n Type INTERACT INTERACT IVE, IVE, conversational, BACKGRO BACKGRO streaming, UND UND interactive, and background. SET SCHEDULEPR IOMAP(Mandat ory) SET USERGBR(Ma This parameter specifies the ndatory) traffic class that SET FACHBANDW the service INTERACT INTERACT IDTH(Mandator belongs to. Based on Quality of Enumeratio IVE, IVE, y) Service (QoS), n Type BACKGRO BACKGRO SET UND UND USERHAPPYB there are two R(Mandatory) traffic classes: interactive, SET DTXDRXPAR background. A(Mandatory) SET HSSCCHLESS OPPARA(Mand atory)
8/7/2013
9753267
162734118.xls.ms_office1
SET REDIRECTIO N(Mandatory) ADD CELLREDIRE CTION(Mandat ory)
TrafficType
Traffic Type
This parameter specifies the AMR, VP, AMR,VP,P traffic type for the Enumeratio PSR99, SR99,PSHS RRC redirection n Type PSHSPA PA algorithm.
TRAMODE
Traffic mode
M3UA_OV ERRIDE_M OD, M3UA_LO ADSHARE _MOD (For details of these two modes, refer to RFC4666.)
Transfer Common Channel User number Value range: 0~10 Content: When the system is overloaded and congested, users on the DCH can be reconfigured to the CCH in order to reduce the cell load and recover the system. ADD The mechanism Interval CELLOLC(Opti of the OLC is that Type onal) an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of users selected in executing reconfiguration to the CCH.
0~10
0~10
8/7/2013
9763267
162734118.xls.ms_office1
This parameter specifies the round-trip transport delay of ADD Iub interface NODEB(Option when the al) transmission mode is ATM transmission or of IP dedicated network. The transport type of the ADD adjacent node of IPPATH(Option the path.This al) parameter only effect on Iub interface.
Interval Type
0~65535
0~65535
TRANST
Transport Type
TRANST
Transport Type
ADD TRMMAP(Man datory) ADD ADJMAP(Man Transport type. datory) ADD ADJNODE(Ma ndatory)
8/7/2013
9773267
162734118.xls.ms_office1
ADD FACH(Mandato ry) ADD FACHLOCH(M andatory) ADD RACH(Optional ) ADD PCHDYNTFS( Optional) ADD FACHDYNTFS (Mandatory) ADD PCH(Optional) ADD RACHDYNTF S(Optional) ADD BCH(Optional)
TrChId
FACH ID
Uniquely identifying a common transport channel in a cell. Interval Configured Type according to the product specifications.
1~32
1~32
TrchType
TrchType
TrchType
TRCH_HS This parameter ADD DSCH, specifies the type TYPRABHSPA Enumeratio TRCH_ED of transport (Mandatory) n Type CH_2MS, channel. TRCH_ED CH_10MS This parameter specifies the type of transport TRCH_DC ADD channel for the H, TYPRABOLPC typical RAB. For Enumeratio TRCH_ED (Mandatory) CS services, this n Type CH_2MS, parameter must TRCH_ED be set to CH_10MS TRCH_DCH. This parameter specifies the type TRCH_DC of transport H, channel at the ADD TRCH_HS local end for the TYPRABRLC( Enumeratio DSCH, typical RAB. For Mandatory) n Type TRCH_ED CS services, this CH_2MS, parameter must TRCH_ED be set to CH_10MS TRCH_DCH.
8/7/2013
9783267
162734118.xls.ms_office1
Related length for 1D records in the best cells. In the speed estimation algorithm, an algorithm is adopted to avoid inaccurate estimation caused by frequent handovers of best cells. That is, ADD during the latest CELLHCSHO( [TRELATELEN Related length Optional) GTH], if more Interval TRelateLengt for 1D records SET than one event 1D Type h HCSHO(Option of a certain cell al) occurs, the event 1D record is restored to the state when the 1st event 1D occurs during the latest [TRELATELEN GTH]. The given time length is set by this parameter. If the value is set too large, the RNC judges a non-frequently
0~120
0~120
8/7/2013
9793267
162734118.xls.ms_office1
If the signal quality (CPICH Ec/No measured by the UE) of a neighboring cell is better than that of the serving cell during the specified time of this parameter, the UE reselects the neighboring cell. It is used to avoid ping-pong reselection ADD between different Interval CELLSELRES cells. Note that Type EL(Optional) the value 0 corresponds to the default value defined in the protocol. Set the parameter as follows: 1. Ensure that the UE can reselect a cell when crossing the nonsoft-switch area of the cell and that the UE timely performs location
Treselections
0~31
0~31
This parameter indicates the UE reselction delay in the CELL_FACH connection mode. Reselection This parameter is delay time for ADD not configured Interval Treselectionsf UE in CELLSELRES when the value is Type ach CELL_FACH EL(Optional) 255. Instead, the state Treselections parameter is used. For detailed inforamtion, refer to 3GPP TS 25.304.
0~31,255
8/7/2013
9803267
162734118.xls.ms_office1
This parameter indicates the UE reselction delay in the CELL_PCH or URA_PCH connection mode. Reselection This parameter is ADD delay time for not configured Interval Treselections CELLSELRES UE in PCH when the value is Type pch EL(Optional) state 255. Instead, the Treselections parameter is used. For detailed inforamtion, refer to 3GPP TS 25.304. This parameter ADD Traffic record specifies the Interval ATMTRF(Man index index of a traffic Type datory) record.
0~31,255
{0~31},{25 5}
TRFX
100~1999
100 to 1999
ADD CELLINTRAF REQHO(Option al) SET INTRAFREQH O(Optional) SET SMLC(Mandato ry)
This parameter specifies the time delay to trigger event 1A. The value of this parameter correlates with slow fading. The larger the value of this parameter, D0, D10, the lower the D20, D40, incorrect decision D60, D80, probability, but D100, the slower the D120, response of the D160, event to Enumeratio D200, measurement n Type D240, signal change. D320, The purposes of D640, the time-to-trigger D1280, mechanism are as D2560, follows: D5000 Reducing the number of wrong event reports caused by burst signals. Inhibiting the ping-pong handover to some extent. Reducing the
8/7/2013
9813267
162734118.xls.ms_office1
This parameter specifies the time delay to trigger event 1B. The value of this parameter correlates with slow fading. The larger the value of this parameter, D0, D10, the lower the D20, D40, incorrect decision D60, D80, probability, but D100, the slower the D120, response of the D160, event to Enumeratio D200, measurement n Type D240, signal change. D320, The purposes of D640, the time-to-trigger D1280, mechanism are as D2560, follows: D5000 Reducing the number of wrong event reports caused by burst signals. Inhibiting the ping-pong handover to some extent. Reducing the
ADD CELLINTRAF REQHO(Option al) SET INTRAFREQH O(Optional) SET SMLC(Mandato ry)
8/7/2013
9823267
162734118.xls.ms_office1
This parameter specifies the time delay to trigger event 1C. The value of this parameter correlates with slow fading. The larger the value of this parameter, D0, D10, the lower the D20, D40, incorrect decision D60, D80, probability, but ADD D100, the slower the CELLINTRAF D120, response of the REQHO(Option D160, event to al) Enumeratio D200, measurement SET n Type D240, signal change. INTRAFREQH D320, The purposes of O(Optional) D640, the time-to-trigger D1280, mechanism are as D2560, follows: D5000 Reducing the number of wrong event reports caused by burst signals. Inhibiting the ping-pong handover to some extent. Reducing the
8/7/2013
9833267
162734118.xls.ms_office1
This parameter specifies the time delay to trigger event 1D. The value of this parameter correlates with slow fading. The larger the value of this parameter, D0, D10, the lower the D20, D40, incorrect decision D60, D80, probability, but ADD D100, the slower the CELLINTRAF D120, response of the REQHO(Option D160, event to al) Enumeratio D200, measurement SET n Type D240, signal change. INTRAFREQH D320, The purposes of O(Optional) D640, the time-to-trigger D1280, mechanism are as D2560, follows: D5000 Reducing the number of wrong event reports caused by burst signals. Inhibiting the ping-pong handover to some extent. Reducing the
8/7/2013
9843267
162734118.xls.ms_office1
This parameter specifies the time delay to trigger 1F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the D0, D10, incorrect decision D20, D40, probability, but D60, D80, the slower the ADD D100, response of the CELLINTRAF D120, event to REQHO(Option D160, measurement al) Enumeratio D200, signal change. SET n Type D240, The purposes of INTRAFREQH D320, the time-to-trigger O(Optional) D640, mechanism are as D1280, follows: D2560, Reducing the D5000 number of wrong event reports caused by burst signals. Inhibiting the ping-pong handover to some extent. Reducing the influence of
8/7/2013
9853267
162734118.xls.ms_office1
This parameter specifies the time delay to trigger event 1J. The value of this parameter correlates with slow fading. The larger the value of this parameter, D0, D10, the lower D20, D40, probability of D60, D80, incorrect ADD D100, decision, but the CELLINTRAF D120, slower the REQHO(Option D160, response of event al) Enumeratio D200, to the change of SET n Type D240, measured signals. INTRAFREQH D320, The purposes of O(Optional) D640, the time-to-trigger D1280, mechanism are as D2560, follows: D5000 Reducing the number of wrong event reports caused by burst signals. Inhibiting the ping-pong handover to some extent. Reducing the
TrigTime1J
8/7/2013
9863267
162734118.xls.ms_office1
Time delay to trigger the event 2C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the D0, D10, lower probability D20, D40, of incorrect D60, D80, decision, but the D100, slower the D120, response of event D160, 2F to the change Enumeratio D200, of measured n Type D240, signals. D320, Based on the D640, existing D1280, emulation result, D2560, the hysteresis D5000 value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In
ADD CELLINTERFR EQHONCOV( Optional) SET INTERFREQH ONCOV(Option al) ADD CELLMBDRIN TERFREQ(Opti onal)
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
8/7/2013
9873267
162734118.xls.ms_office1
Time delay to trigger the event 2D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower D0, D10, probability of D20, D40, incorrect D60, D80, decision, but the D100, slower the D120, response of event D160, 2F to the change Enumeratio D200, of measured n Type D240, signals. D320, Based on the D640, existing D1280, emulation result, D2560, the hysteresis D5000 value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In
8/7/2013
9883267
162734118.xls.ms_office1
Time delay to trigger the event 2F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower D0, D10, probability of D20, D40, incorrect D60, D80, decision, but the D100, slower the D120, response of event D160, 2F to the change Enumeratio D200, of measured n Type D240, signals. D320, Based on the D640, existing D1280, emulation result, D2560, the hysteresis D5000 value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In
8/7/2013
9893267
162734118.xls.ms_office1
Time delay to trigger the event 3A. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the D0, D10, incorrect decision D20, D40, probability, but D60, D80, the slower the D100, response of the D120, event 3A to D160, measurement Enumeratio D200, signal change. n Type D240, Based on the D320, existing D640, emulation result, D1280, the hysteresis D2560, value is set to D5000 effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the
8/7/2013
9903267
162734118.xls.ms_office1
Time delay to trigger the event 3C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the D0, D10, incorrect decision D20, D40, probability, but D60, D80, the slower the D100, response of the D120, event 3C to D160, measurement Enumeratio D200, signal change. n Type D240, Based on the D320, existing D640, emulation result, D1280, the hysteresis D2560, value is set to D5000 effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the
ADD CELLINTERR ATHONCOV( Optional) SET INTERRATHO NCOV(Optional ) ADD CELLMBDRIN TERRAT(Optio nal)
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
8/7/2013
9913267
162734118.xls.ms_office1
To guarantee the power control performance within a time slot, that is, to ensure that the power control within a time slot is D0, D10, implemented D20, D40, based on all links D60, D80, in the active set, D100, the ideal UE RxD120, Tx time SET D160, difference should HOCOMM(Opt Enumeratio D200, be 1024 chips. ional) n Type D240, When the UE RxD320, Tx time D640, difference D1280, becomes greater D2560, than the D5000 predefined threshold, event 6F will be triggered. For the definition and its related details, refer to the 3GPP TS 25.331
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
8/7/2013
9923267
162734118.xls.ms_office1
To guarantee the power control performance within a time slot, that is, to ensure that the power control within a time slot is implemented based on all links in the active set, the ideal UE RxTx time SET difference should HOCOMM(Opt be 1024 chips. ional) When the UE RxTx time difference becomes smaller than the predefined threshold, event 6G will be triggered. For the definition and its related details, refer to the 3GPP TS 25.331 This parameter specifies the ADD number of a port ETHTRKLNK( that carries the Mandatory) link in a trunk group. This parameter ADD specifies the slot ETHTRKLNK( number for a Mandatory) member port in a trunk group. ADD ETHTRK(Mand atory) This parameter ADD specifies the ETHTRKIP(Ma number of a trunk ndatory) group. ADD ETHTRKLNK( Mandatory)
D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
TRKLNKPN
Interval Type
0~7
0 to 7
TRKLNKSN
Interval Type
14~27
14 to 27
TRKN
Trunk No.
Interval Type
0~7
0 to 7
8/7/2013
9933267
162734118.xls.ms_office1
Radio Link Failure Timer Duration. When the radio link set is in the synchronized state, the NodeB starts the timer after it receives successive out-ofsync indications of the number defined by NOutsyncInd. The NodeB shall ADD stop and reset the Interval CELLSETUP(O timer after Type ptional) receiving successive insync indications of the number defined by NInsyncInd. When the timer expires, the NodeB triggers the radio link failure process, and indicates which radio link set is out-of-sync. If the value is
TRlFailure
0~255
TRncId
Interval Type
0~4095
0~4095
This parameter ADD specifies the TRUNK Dhcp TRUNKDHC NODEBESN(M TRUNK IP Server IP PSVRIP andatory) address for the DHCP server.
IP Address Type
0.0.0.0~255 .255.255.25 5
8/7/2013
9943267
162734118.xls.ms_office1
TRUNKIP
This parameter ADD specifies the IP IP Address NODEBESN(M address of the Type andatory) NodeB TRUNK.
0.0.0.0~255 .255.255.25 5
This parameter ADD specifies the NODEBESN(M subnet mask for andatory) the NodeB TRUNK.
IP Address Type
0.0.0.0~255 .255.255.25 5
TRUNKN
This parameter ADD specifies the Interval IPLOGICPORT number of a trunk Type (Mandatory) group on the logical port.
0~7
0~7
8/7/2013
9953267
162734118.xls.ms_office1
TS
TS1(Time_s lot_1), TS2(Time_s lot_2), TS3(Time_s lot_3), TS4(Time_s lot_4), TS5(Time_s lot_5), This parameter TS6(Time_s specifies the lot_6), number of a TS7(Time_s timeslot. For E1 lot_7), LOP links, the value of TS8(Time_s E1T1(Mandator this parameter Enumeratio lot_8), y) ranges from 1 to n Type TS9(Time_s 31. For T1 links, lot_9), the value of this TS10(Time parameter ranges _slot_10), from 1 to 24. TS11(Time _slot_11), TS12(Time _slot_12), TS13(Time _slot_13), TS14(Time _slot_14), TS15(Time _slot_15), TS16(Time
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
8/7/2013
9963267
162734118.xls.ms_office1
This parameter specifies whether timeslot 16 is used. The setting SET of this parameter Enumeratio ON, OFF E1T1(Optional) should be n Type consistent with that at the peer end.
ON, OFF
8/7/2013
9973267
162734118.xls.ms_office1
TS1(Time_s lot_1), TS2(Time_s lot_2), TS3(Time_s lot_3), TS4(Time_s lot_4), TS5(Time_s lot_5), TS6(Time_s lot_6), TS7(Time_s lot_7), TS8(Time_s lot_8), TS9(Time_s lot_9), TS10(Time _slot_10), TS11(Time _slot_11), TS12(Time _slot_12), TS13(Time _slot_13), TS14(Time _slot_14), TS15(Time _slot_15), TS16(Time
TS1,TS2,TS 3,TS4,TS5, TS6,TS7,TS 8,TS9,TS10 ,TS11,TS12 ,TS13,TS14 ,TS15,TS16 ,TS17,TS18 ,TS19,TS20 ,TS21,TS22 ,TS23,TS24 ,TS25,TS26 ,TS27,TS28 ,TS29,TS30 ,TS31
TSCROSSX
This parameter specifies the index of timeslot ADD cross connection. Interval TSCROSS(Opti Type The index is onal) automatically generated by the system. This parameter STR specifies the SCHTSK(Optio name of the nal) scheduled task to be started.
0~65535
0 to 65535
TSKN
Task Name
String Type -
1~50 characters
8/7/2013
9983267
162734118.xls.ms_office1
Time window for deciding whether the UE is in lowmobility state. ADD Every time the CELLHCSHO( slow speed cycle Time window Optional) timer times out, Interval TSlowSpdEst for UE slow SET the RNC Type speed decision HCSHO(Option estimates whether al) the UE is in lowmobility state. The backdated time length is set by this parameter.
0~511
0~511
TstImsi
SET MGWTST user MGWTST(Man IMSI in a number String Type datory) segment.
TSTLEN
Test Len
This parameter specifies the time duration of the IP STR loopback test. Interval IPLOPTST(Opt During this Type ional) period, the DSP sends detection packets at a specified rate. Indicating SET whether setting MGWTST(Man MGWTST datory) Switch on.
1~120
1 to 120
TstSwitch
MGWTST SWITCH
OFF, ON
TTIME
This parameter STR specifies the Duration time CPUUSAGETS duration of the T(Mandatory) CPU usage test.
Interval Type
8/7/2013
9993267
162734118.xls.ms_office1
TTL
PKT TTL
This parameter specifies the timeTRC to-live of a packet Interval MAC(Optional) detected through Type EthOAM 1AG link tracing. This parameter ADD specifies the Interval ATMLOGICPO forward Type RT(Mandatory) bandwidth of the logical port.
1~128
1 to 128
TXBW
Forward bandwidth
10~2810
530~14893 0
TXBW
Forward bandwidth
1~3000000 1~3000000
TxBw
Forward Bandwidth
This parameter is valid only when Transport Resource Group ADD Type is ATM or Interval RSCGRP(Mand Transport Type atory) Resource Group Type is IP and Bandwidth Mode is FULL_DUPLEX.
0~4000000 0~4000000
8/7/2013
10003267
162734118.xls.ms_office1
This parameter indicates whether transmission TRUE, Enumeratio diversity FALSE configuration of n Type the cell is activated. This parameter specifies the interval of sending the ping packets.
TRUE, FALSE
TXINT
Interval of send
PING IP(Optional)
Interval Type
200~10000
200 to 10000
TXINT
This parameter STR specifies the Interval IPLOPTST(Opt interval for Type ional) sending loopback packets.
10~60
10 to 60
TXTRFX
ADD IPOAPVC(Opti onal) ADD AAL2PATH(M andatory) ADD SAALLNK(Ma ndatory) ADD VPCLCX(Mand atory)
This parameter specifies the TX traffic record index at the port from which the IPoA PVC goes out of the RNC. The TX traffic must have been configured.
Interval Type
100~1999
100 to 1999
8/7/2013
10013267
162734118.xls.ms_office1
This parameter specifies the upper layer application type to be set. The type may be CCP, NCP, IPoA PVC, or ALCAP. Depending on the value of [Band indication], as shown below: Band1 General frequencies: [10562-10838] Additional frequencies: none Band2 General frequencies: [9662-9938] Additional frequencies: {412,437,462,487 ,512,537,562,587, 612,637,662,687} Band3 General frequencies: [1162-1513] Additional frequencies: none Band4 General frequencies: [1537-1738] Additional frequencies: {1887, 1912,
TYPE
Application Type
Interval Type
0~16383
0~16383
8/7/2013
10023267
162734118.xls.ms_office1
Depending on the value of [Band indication], as shown below: Band1: General frequencies: [9612-9888] Additional frequencies: none Band2: General frequencies: [9262-9538] Additional frequencies: Interval {12,37,62,87,112, Type 137,162,187,212, 237,262,287} Band3: General frequencies: [9371288] Additional frequencies: none Band4: General frequencies: [1312-1513] Additional frequencies: {1662, 1687,
0~16383
0~16383
8/7/2013
10033267
162734118.xls.ms_office1
Indicating whether the UL frequency of the cell need be configured. TRUE indicates that the UL frequency need be configured. ADD FALSE indicates CELLSETUP(O that the UL UL frequency ptional) frequency need TRUE, UARFCNUpl Enumeratio ind ADD not be configured. FALSE inkInd n Type NRNCCELL(O It is configured ptional) automatically according to the relationship between UL and DL frequencies. For detailed information of this parameter, refer to 3GPP TS 25.433.
TRUE, FALSE
This timer is started when an AAL2 signaling SET entity sends the AAL2TMR(Opt peer node a ional) request for unblocking an AAL2 path.
Interval Type
2000~6000 2000~6000 0 0
135~1031
135~1031
8/7/2013
10043267
162734118.xls.ms_office1
Receive UDP MUX Mode(Only effect on IuCS interface). Not support udpmux mode means receiver not support UDP ADD Receive UDP MUX, RTP head UDPMUXM IPPATH(Option MUX Mode not MUX mode ODRECV al) means receiver support UDP MUX but not RTP header MUX,RTP head MUX mode means support both. Sender UDP MUX Mode(Only effect on IuCS interface), Not support udpmux mode means not support UDP ADD MUX, RTP head Sender UDP UDPMUXM IPPATH(Option not MUX mode MUX Mode ODSEND al) means the sender support UDP MUX but not RTP header MUX,RTP head MUX mode means support both.
1~10
1~10
8/7/2013
10053267
162734118.xls.ms_office1
Switch for sending A-GPS assistance data in UE-assisted A- SET UE-assisted Bit Field UeAssAgpsA GPS Data SMLC(Optional mode. This Type ssDataSwitch Send switch ) parameter specifies the GPS data to be sent.
REFEREN CE_TIME_ FOR_GPS, REFEREN CE_LOCA TION_FOR _GPS, DGPS_CO RRECT, GPS_NAV GMODEL, GPS_IONO SPHERIC_ MODEL, GPS_UTC_ MODEL, GPS_ALM ANAC, GPS_ACQ_ ASSIST, GPS_REAL TIME_INT EGRITY REFEREN CE_TIME_ FOR_GPS, REFEREN CE_LOCA TION_FOR _GPS, DGPS_CO RRECT, GPS_NAV GMODEL, GPS_IONO SPHERIC_ MODEL, GPS_UTC_ MODEL, GPS_ALM ANAC, GPS_ACQ_ ASSIST, GPS_REAL TIME_INT EGRITY
REFEREN CE_TIME_ FOR_GPS, REFEREN CE_LOCA TION_FOR _GPS, DGPS_CO RRECT, GPS_NAV GMODEL, GPS_IONO SPHERIC_ MODEL, GPS_UTC_ MODEL, GPS_ALM ANAC, GPS_ACQ_ ASSIST, GPS_REAL TIME_INT EGRITY REFEREN CE_TIME_ FOR_GPS, REFEREN CE_LOCA TION_FOR _GPS, DGPS_CO RRECT, GPS_NAV GMODEL, GPS_IONO SPHERIC_ MODEL, GPS_UTC_ MODEL, GPS_ALM ANAC, GPS_ACQ_ ASSIST, GPS_REAL TIME_INT EGRITY
Switch for sending A-GPS SET assistance data in Bit Field SMLC(Optional UE-based mode. Type ) This parameter specifies the GPS data to be sent.
A timer used to UE capability SET wait UE Interval UeCapEnqRs enquiry STATETIMER( capability enquiry Type pTmr response timer Optional) response .
1~10000
1~10000
8/7/2013
10063267
162734118.xls.ms_office1
A timer to RNC wait for the UE counter SET response to UeCntCheck check response STATETIMER( counter check in RspTmr timer Optional) security mode procedure.
Interval Type
1~10000
1~10000
UINT
Uninhibit Type
This parameter specifies the type of the LOGIC(Log LOGIC(Log UIN uninhibition, ic ic BRD(Mandator which can be Enumeratio uninhibit), uninhibit), y) physical n Type PHYSICAL PHYSICAL uninhibition and (Physical (Physical logical uninhibit) uninhibit) uninhibition.
UINTTIME
Unit time
This parameter STR specifies the unit Interval E1T1TST(Optio time used for the Type nal) BER test.
300~1000
300 to 1000
UL
Upper Limit
This parameter SET specifies the ALMPORT(Opt String Type upper limit of the ional) alarm.
0~9Charact ers
8/7/2013
10073267
162734118.xls.ms_office1
UL activity factor of the R99 AMR conversational service Signals might be discontinuously transmitted because of the activation detection of conversational service and source changes of data service. The UL AF of R99 SET activity factor is Interval UlAmrConvA AMR conv ADMCTRL(Op defined as the Type F service tional) ratio of signal transmission time to channel occupation time. The activity factors of the same transport channel might be different in UL and DL. A pair of activity factors is separately defined for each of the four service classes.
0~100
8/7/2013
10083267
162734118.xls.ms_office1
Duration when the measured value of AMR keeps fulfilling the 6A1 measurement condition before the event 6A1 is triggered. Event triggering is used D0, D10, for UL D20, D40, measurement. D60, D80, The event 6A1 is ADD D100, triggered when CELLQUALIT D120, the measured YMEAS(Option D160, AMR Trigger value is greater UlAmrTrigTi al) Enumeratio D200, Time 6A1 than the absolute me6A1 SET n Type D240, upper threshold QUALITYME D320, 6A1. When the AS(Optional) D640, event 6A1 is D1280, triggered, the D2560, AMR speech rate D5000 should be lowered. The measured value is reported after it fulfills the conditions for reporting and for the trigger time specified by this parameter. The
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
8/7/2013
10093267
162734118.xls.ms_office1
Duration when the measured value of AMR keeps fulfilling the 6A1 measurement condition before the event 6A2 is triggered. Event triggering is used D0, D10, for UL D20, D40, measurement. D60, D80, The event 6A2 is ADD D100, triggered when CELLQUALIT D120, the measured YMEAS(Option D160, AMR Trigger value is greater UlAmrTrigTi al) Enumeratio D200, Time 6A2 than the absolute me6A2 SET n Type D240, upper threshold QUALITYME D320, 6A2. When the AS(Optional) D640, event 6A2 is D1280, triggered, the D2560, AMR speech rate D5000 should be lowered. The measured value is reported after it fulfills the conditions for reporting and for the trigger time specified by this parameter. The
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
8/7/2013
10103267
162734118.xls.ms_office1
Duration when the measured value of AMR keeps fulfilling the 6B1 measurement condition before the event 6B1 is triggered. Event triggering is used D0, D10, for UL D20, D40, measurement. D60, D80, The event 6B1 is ADD D100, triggered when CELLQUALIT D120, the measured YMEAS(Option D160, AMR Trigger value is lower UlAmrTrigTi al) Enumeratio D200, Time 6B1 than the absolute me6B1 SET n Type D240, lower threshold QUALITYME D320, 6B1. When the AS(Optional) D640, event 6B1 is D1280, triggered, the D2560, AMR speech rate D5000 should be raised. The measured value is reported after it fulfills the conditions for reporting and for the trigger time specified by this parameter. The trigger time is
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
8/7/2013
10113267
162734118.xls.ms_office1
Duration when the measured value of AMR keeps fulfilling the 6B2 measurement condition before the event 6B2 is triggered. Event triggering is used D0, D10, for UL D20, D40, measurement. D60, D80, The event 6B2 is ADD D100, triggered when CELLQUALIT D120, the measured YMEAS(Option D160, AMR Trigger value is lower UlAmrTrigTi al) Enumeratio D200, Time 6B2 than the absolute me6B2 SET n Type D240, lower threshold QUALITYME D320, 6B2. When the AS(Optional) D640, event 6B2 is D1280, triggered, the D2560, AMR speech rate D5000 should be raised. The measured value is reported after it fulfills the conditions for reporting and for the trigger time specified by this parameter. The trigger time is
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
8/7/2013
10123267
162734118.xls.ms_office1
Duration when the measured value of AMR keeps fulfilling the 6D measurement condition before the event 6D is triggered. Event triggering is used D0, D10, for UL D20, D40, measurement. D60, D80, The event 6D is ADD D100, triggered when CELLQUALIT D120, the measured YMEAS(Option D160, AMR Trigger value is greater UlAmrTrigTi al) Enumeratio D200, Time 6D than the absolute me6D SET n Type D240, upper threshold QUALITYME D320, 6D. When the AS(Optional) D640, event 6D is D1280, triggered, the D2560, AMR speech rate D5000 should be lowered. The measured value is reported after it fulfills the conditions for reporting and for the trigger time specified by this parameter. The
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
UL activity UL AF of R99 SET factor of the R99 Interval UlBackgroun background ADMCTRL(Op background Type dAF service tional) service.
0~100
8/7/2013
10133267
162734118.xls.ms_office1
Value range: D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19 Physical value range: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19 Content: L3 filtering D0, D1, coefficient. The SET D2, D3, D4, larger the value of LDM(Optional) this parameter, D5, D6, D7, SET the stronger the Enumeratio D8, D9, SATLDM(Opti smoothing effect n Type D11, D13, onal) D15, D17, and the higher the D19 anti-slow-fading capability, but the lower the signal change tracing capability. For detailed information of this parameter, refer to 3GPP TS 25.433. Recommended value: D6
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
8/7/2013
10143267
162734118.xls.ms_office1
This parameter specifies the default rate threshold for decision to use DCH to carry UL PS domain background/intera ctive services. If the FRC parameters of the best cell cannot be obtained, this SET default value will FRCCHLTYPE be used. Only UL BE traffic PARA(Optional when the UL UlBeTraffDe DCH decision ) Enumeratio D8, D16 service rate is cThs threshold ADD n Type higher than or CELLFRC(Opti equal to this onal) threshold, and the DL service rate is higher than or equal to the downlink threshold, the service will be set up on DCH. Otherwise, the service is set up on CCH. According to the product
8, 16
8/7/2013
10153267
162734118.xls.ms_office1
UL BE traffic Initial bit rate. When DCCC function is enabled, the uplink initial bit rate will be set to this value if the uplink max bit rate is higher than the initial bit rate.The larger this parameter to be set, the sooner max bit rate to be UL BE traffic SET reached, but the UlBeTraffInit Initial bit rate FRC(Optional) bit rate is more Bitrate likely to be declined when system congested, so it makes no sense to set this parameter too high. Contrarily,the smaller the parameter to be set, the more easily the BE traffic to be accessed at required bit rate. The rate decision threshold of UL PS domain background/intera ctive service to be carried on EDCH. When the SET UL BE traffic maximum UL FRCCHLTYPE UlBeTraffThs threshold on service rate is PARA(Optional OnHsupa HSUPA higher than or ) equal to this threshold, the service will be carried on EDCH; otherwise, it will be carried on DCH.
D8, D16, D32, D64, 8,16,32,64,1 Enumeratio D128, 28,144,256, n Type D144, 384 D256, D384
D8, D16, D32, D64, D128, D144, D256, Enumeratio D384, n Type D608, D1440, D2048, D2880, D5740
8/7/2013
10163267
162734118.xls.ms_office1
Duration when the measured value of BE keeps fulfilling the 6A1 measurement condition before the event 6A1 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Duration when the measured value of BE keeps fulfilling the 6A2 measurement condition before the event 6A2 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.
D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
8/7/2013
10173267
162734118.xls.ms_office1
Duration when the measured value of BE keeps fulfilling the 6B1 measurement condition before the event 6B1 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Duration when the measured value of BE keeps fulfilling the 6B2 measurement condition before the event 6B2 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.
D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
8/7/2013
10183267
162734118.xls.ms_office1
Duration when the measured value of BE keeps fulfilling the 6D measurement condition before the event 6D is D0, D10, triggered. The D20, D40, trigger time is D60, D80, ADD used to prevent D100, CELLQUALIT the sudden D120, YMEAS(Option change of the D160, al) measured value Enumeratio D200, SET for being n Type D240, QUALITYME reported. The D320, AS(Optional) longer the trigger D640, time is, the D1280, greater the effect D2560, of ignoring D5000 sudden changes is. Yet the response to changes of the measured value becomes slower. SET LDM(Optional) SET SATLDM(Opti onal) Length of smoothing filter Interval window of uplink Type CAC.
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
1~32
1~32
8/7/2013
10193267
162734118.xls.ms_office1
The admission control decision is only for dedicated channels. For common channels, some resources instead of a special admission procedure are reserved. In the UL, according to the current load factor and the ADD characteristics of Interval CELLCAC(Opti the new call, the Type onal) UL CAC algorithm predicts the new traffic channels load factor with the assumption of admitting the new call, then plus with the premeditated common channel UL load factor to get the predicted UL load factor. Then, compare it
0~100
0~1, step:0.01
8/7/2013
10203267
162734118.xls.ms_office1
Admission threshold of total cell uplink power. This parameter is related to the target load of the uplink schedule. The total uplink load fluctuates closing to the target load due to the schedule mechanism of the HSUPA. Therefore, the ADD target load is CELLCAC(Opti added with onal) margin, acting as the basis of this parameter. If the value is too high, the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the possibility of user rejects may This parameter specifies the compression method that the NodeB supports in the uplink. - SF/2: SF reduction by two ADD HIGHER_LAYE NODEBLMTP R_SCHDL: ARA(Optional) higher layer scheduling If both SF/2 and HIGHER_LAYE R_SCHDL are selected, the NodeB supports both of the compression methods in the
Interval Type
0~100
0~1, step:0.01
8/7/2013
10213267
162734118.xls.ms_office1
Number of users selected in a UL LDR CS domain inter-RAT SHOULDBE load handover. The target subscribers of this parameter are the CS domain subscribers. Because the CS domain subscribers are session subscribers in general and they have little impact on load, you can set this parameter to a comparatively Number of users selected in a UL LDR CS domain inter-RAT SHOULDNOTB E load handover. The target subscribers of this parameter are the CS domain subscribers. Because the CS domain subscribers are session subscribers in general and they have little impact on load, you can set this parameter to a comparatively high value.
ADD CELLLDR(Opti UL CS should UlCSInterRat onal) be HO user ShouldBeHO ADD number UeNum NODEBLDR(O ptional)
Interval Type
1~10
1~10
ADD CELLLDR(Opti UL CS should UlCSInterRat onal) not be HO user ShouldNotHO ADD number UeNum NODEBLDR(O ptional)
Interval Type
1~10
1~10
8/7/2013
10223267
162734118.xls.ms_office1
For a BE service that has a low maximum rate, the DCCC algorithm is not obviously effective yet it increases algorithm processing. Thus, the traffic-based DCCC algorithm is applied to BE services whose maximum UL rate is greater than the This parameter specifies the UL FP mode of this type of RAB. For details of normal mode and silent mode, refer to section 5.1.1 of the 3GPP TS 25.427. Maximum UL rate when coverage of the entire cell is ensured under certain load. For a BE service that has a low maximum rate, the DCCC algorithm is not obviously effective yet it increases algorithm processing. Thus, the coveragebased DCCC algorithm is applied to BE services whose maximum UL rate
D8, D16, D32, D64, Enumeratio D128, n Type D144, D256, D384
UlFpMode
UL FP Mode
D8, D16, D32, D64, Enumeratio D128, n Type D144, D256, D384
8/7/2013
10233267
162734118.xls.ms_office1
UlGBR
This parameter SET Uplink GBR specifies the UL USERGBR(Opt for BE service GBR of the BE ional) service.
D0, D8, D16, D32, Enumeratio D64, D128, n Type D144, D256, D384
8/7/2013
10243267
162734118.xls.ms_office1
Uplink Credit Reserved by Spread Factor for HandOver. SFOFF means that none of them are reserved for handover. If the UL spare resource cant satisfy the SF4(SF4), reserved resource SF8(SF8), after the access of SF16(SF16) a new service, the , service will be SF32(SF32) rejected. If the , UL handover ADD value is too high, SF64(SF64) UlHoCeResv credit reserved CELLCAC(Opti Enumeratio the credit , Sf SF onal) n Type resource reserved SF128(SF1 for handover UEs 28), will be less, SF256(SF2 leading to the 56), increased SFOFF(SF possibility of OFF) rejecting handover UE admissions, and performance of handover UEs cannot be guaranteed. If the value is too low, the possibility of
8/7/2013
10253267
162734118.xls.ms_office1
If the HSDPCCH carries ACK/NACK, the system will not perform CAC. If the HS-DPCCH carries CQI, the system will perform CAC. This parameter refers to the resources reserved for the uplink HSDPCCH carrying UL HSADD ACK/NACK. The UlHsDpcchR DPCCH CELLCAC(Opti corresponding svdFactor reserve factor onal) threshold is the uplink limit capacity multiplied by this parameter. If the value is too high, the possibility of wrong rejection to uplink admissions increases, leading to waste in uplink resources. If the value is too low, the uplink resources is This parameter specifies the EDCH data transfer mode of IMS signalling IMS signalling UlIMSTrans transmission SET services. It is ModeOnHsup mode on FRC(Optional) valid only when a HSUPA IMS signalling services are mapped onto the E-DCH.
Interval Type
0~100
0~1, step:0.01
UL activity UL AF of R99 SET factor of the R99 Interval UlInteractAF interactive ADMCTRL(Op interactive Type service tional) service.
0~100
8/7/2013
10263267
162734118.xls.ms_office1
The UE can be selected to process load handover only when its bandwidth is less than this threshold. The higher the parameter is, the higher the service rate of the user in handover is, and the more obviously the cell ADD load is decreased. Interval CELLLDR(Opti However, high Type onal) value of the parameter gives rise to the fluctuation and congestion of the target cell load. The lower the parameter is, the smaller amplitude of the load decreases as a result of the interfrequency load handover, and the easier it is to
0~400000
0~400000
8/7/2013
10273267
162734118.xls.ms_office1
The interfrequency neighboring cell could be selected as the destination of load handover only when its load remaining space is larger than this threshold. The lower the parameter is, the easier it is to find ADD a qualified target UlInterFreqH UL HO load Interval CELLLDR(Opti cell for the blind oCellLoadSpa space threshold Type onal) handover. ceThd Excessively small value of the parameter, however makes the target cell easily enter the congestion status. The higher the parameter is, the more difficult it is for the interfrequency blind handover occurs.
0~100
0~1, step:0.01
8/7/2013
10283267
162734118.xls.ms_office1
The mechanism of the LDR is that an action is performed in each [LDR period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of RABs selected in UL LDRexecuting uplink ADD UlLdrAMRR AMR rate LDR-AMR voice Interval CELLLDR(Opti ateReduction reduction RAB service rate Type onal) RabNum number reduction. If the parameter value is too high, the LDR action may fluctuate greatly and over control may occur (the state of basic congestion turns into another extreme-underload). If the parameter value is too low, the LDR action has a slow SET LDM(Optional) SET SATLDM(Opti onal) Length of smoothing filter Interval window of uplink Type LDR.
1~10
1~10
1~32
1~32
8/7/2013
10293267
162734118.xls.ms_office1
Number of RABs selected in a UL LDR BE traffic rate reduction. In the actual system, this parameter can be set on the basis of the actual circumstances. If the high-rate subscribers occupy a high proportion, set the ADD parameter to a CELLLDR(Opti comparatively onal) low value. If the Interval ADD high-rate Type NODEBLDR(O subscribers ptional) occupy a low proportion, set the parameter to a comparatively high value. Because the basic congestion control algorithm is designed to slowly decrease cell load, you need to set this parameter to a comparatively
1~10
1~10
8/7/2013
10303267
162734118.xls.ms_office1
Reserved SF threshold in uplink credit LDR. The uplink credit LDR could be triggered only when the SF factor corresponding to the uplink reserved credit is SF4(SF4), higher than the SF8(SF8), uplink or SF16(SF16) ADD downlink credit , SF4, SF8, CELLLDR(Opti SF reserved SF32(SF32) SF16, SF32, onal) threshold. The , Enumeratio SF64, ADD lower the SF64(SF64) n Type SF128, NODEBLDR(O parameter value , SF256 ptional) is, the easier the SF128(SF1 credit enters the 28), congestion status, SF256(SF2 the easier the 56) LDR action is triggered, and the easier the user experience is affected. A lower code resource LDR trigger threshold, however, causes a higher admission
8/7/2013
10313267
162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter traff Qos rehas the same negotiation) ADD content as , CELLLDR(Opti UlLdrFirstAction. Enumeratio CSInterRat onal) The selected n Type ShouldBeL actions, however, DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),
UlLdrEighth Action
NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,CSInterRat ShouldNotL DHO,PSInt erRatShould NotLDHO
8/7/2013
10323267
162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as UL LDR fifth onal) , UlLdrFifthAc UlLdrFirstAction. Enumeratio action ADD CSInterRat tion The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),
NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,CSInterRat ShouldNotL DHO,PSInt erRatShould NotLDHO
8/7/2013
10333267
162734118.xls.ms_office1
NOACT: No NoAct(no load reshuffling action), action is taken. InterFreqL INTERFREQLD DHO(interHO: The interfreq load frequency load handover), handover is BERateRed performed. (BE traff BERATERED: rate Channels are reduction), NoAct,Inter reconfigured for QoSRenego FreqLDHO, the BE service. (uncontrolle BERateRed, QOSRENEGO: d real-time QoSRenego ADD The renegotiation traff Qos re- ,CSInterRat CELLLDR(Opti on the QoS of the negotiation) ShouldBeL UL LDR first onal) uncontrollable , DHO,PSInt UlLdrFirstAct Enumeratio action ADD real-time service CSInterRat erRatShould ion n Type NODEBLDR(O is performed. ShouldBeL BeLDHO,A ptional) CSINTERRATS DHO(CS MRRateRed HOULDBELDH domain ,CSInterRat O: The inter-RAT inter-rat ShouldNotL SHOULDBE load should be DHO,PSInt handover of the load erRatShould CS domain is handover), NotLDHO performed. PSInterRatS PSINTERRATS houldBeLD HOULDBELDH HO(PS O: The inter-RAT domain SHOULDBE load inter-rat handover of the should be PS domain is load performed. handover),
8/7/2013
10343267
162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as onal) , UlLdrFirstAction. Enumeratio ADD CSInterRat The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),
UlLdrFourth Action
NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,CSInterRat ShouldNotL DHO,PSInt erRatShould NotLDHO
8/7/2013
10353267
162734118.xls.ms_office1
Number of RABs selected in a UL LDR uncontrolled real-time traffic QoS renegotiation. The target subscribers of this parameter are the PS domain real-time subscribers. The setting of this parameter is ADD analogous to the UL LDR un- CELLLDR(Opti setting of BE UlLdrPsRTQ ctrl RT Qos re- onal) service rate Interval osRenegRab nego RAB ADD reduction Type Num num NODEBLDR(O subscriber ptional) number. Because the number of subscribers performing QoS renegotiation may be smaller than the value of this parameter, for example, the candidate subscribers selected for downlink LDR do not meet the QoS
1~10
1~10
8/7/2013
10363267
162734118.xls.ms_office1
If the ratio of UL load of the cell to the uplink capacity is lower than this threshold, the UL load reshuffling function of the cell is stopped. After the basic congestion state of the cell load is released, the system no longer implements the ADD LDR action. Interval CELLLDM(Opt Because the load Type ional) fluctuates, the difference between the LDR release threshold and trigger threshold should be higher than 10%. The pingpong effect of the preliminary congestion state may occur. The lower the LDR trigger and release thresholds
0~100
0~1, step:0.01
8/7/2013
10373267
162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as onal) , UlLdrFirstAction. Enumeratio ADD CSInterRat The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),
NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,CSInterRat ShouldNotL DHO,PSInt erRatShould NotLDHO
8/7/2013
10383267
162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter traff Qos rehas the same negotiation) ADD content as UL LDR , UlLdrSeventh CELLLDR(Opti UlLdrFirstAction. Enumeratio seventh action CSInterRat Action onal) The selected n Type ShouldBeL actions, however, DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),
NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,CSInterRat ShouldNotL DHO,PSInt erRatShould NotLDHO
8/7/2013
10393267
162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as UL LDR sixth onal) , UlLdrSixthAc UlLdrFirstAction. Enumeratio action ADD CSInterRat tion The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),
NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,CSInterRat ShouldNotL DHO,PSInt erRatShould NotLDHO
8/7/2013
10403267
162734118.xls.ms_office1
NoAct(no action), InterFreqL DHO(interfreq load handover), BERateRed (BE traff rate reduction), QoSRenego (uncontrolle d real-time This parameter ADD traff Qos rehas the same CELLLDR(Opti negotiation) content as UL LDR third onal) , UlLdrThirdA UlLdrFirstAction. Enumeratio action ADD CSInterRat ction The selected n Type NODEBLDR(O ShouldBeL actions, however, ptional) DHO(CS should be unique. domain inter-rat should be load handover), PSInterRatS houldBeLD HO(PS domain inter-rat should be load handover),
NoAct,Inter FreqLDHO, BERateRed, QoSRenego ,CSInterRat ShouldBeL DHO,PSInt erRatShould BeLDHO,A MRRateRed ,CSInterRat ShouldNotL DHO,PSInt erRatShould NotLDHO
8/7/2013
10413267
162734118.xls.ms_office1
If the ratio of UL load of the cell to the uplink capacity is not lower than this threshold, the UL load reshuffling function of the cell is triggered. After the basic congestion state of the cell load is released, the system no longer implements the ADD LDR action. Interval CELLLDM(Opt Because the load Type ional) fluctuates, the difference between the LDR release threshold and trigger threshold should be higher than 10%. The pingpong effect of the preliminary congestion state may occur. The lower the LDR trigger and release thresholds
0~100
0~1, step:0.01
This parameter specifies the maximum number of TFCs D16, D32, (Transport Format D48, D64, ADD Combination) D96, D128, NODEBLMTP allowed in the Enumeratio D256, ARA(Optional) uplink. The larger n Type D512, the value of this D1024 parameter, the larger the number of available TFCs in the uplink.
8/7/2013
10423267
162734118.xls.ms_office1
Smooth filtering coefficient for UL measured values. The smooth filtering algorithm is used to avoid random interference in measurement reporting. ADD Smoothness is D0, D1, CELLQUALIT decided by the D2, D3, D4, YMEAS(Option filtering D5, D6, D7, al) coefficient of the Enumeratio D8, D9, SET measurement. n Type D11, D13, QUALITYME The greater the D15, D17, AS(Optional) filtering D19 coefficient is, the greater the smoothing effect is and the less the random interference is. Yet the respond to changes of the measured value becomes slower.
This parameter determines whether SET automatic or AUTO_CA DCCC(Optional manual mode is Enumeratio LC, 0, 1 ) used for 3-step n Type HAND_AP adjustment of the POINT uplink intermediate rate.
8/7/2013
10433267
162734118.xls.ms_office1
Threshold of the UL intermediate rate when the 3step mode is used D16, D32, SET 16, 32, 64, for UL rate D64, D128, DCCC(Mandato Enumeratio 128, 144, adjustment and D144, ry) n Type 256, 384 the manual mode D256, D384 is used for UL intermediate rate adjustment.
To adjust the UL AMR speech rate, AMRC delivers the TFC SET CONTROL AMRC(Optiona command and UL Mode l) starts this timer. If Interval UlModeChan Change Timer SET no failure Type geTimerLen Length AMRCWB(Opt message is ional) received when the timer expires, the adjustment of the UL AMR speech rate is successful.
1~64000
1~64000
UL activity UL AF of R99 SET factor of the R99 Interval UlNonAmrCo non AMR conv ADMCTRL(Op non AMR Type nvAF service tional) conversational service.
0~100
8/7/2013
10443267
162734118.xls.ms_office1
The percentage of the conversational AMR service threshold to the 100% uplink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the AMR service admission. That is, when an AMR UL threshold ADD service is Interval UlNonCtrlTh of Conv AMR CELLCAC(Opti accessing, the Type dForAMR service onal) RNC evalutates the measurement value of the uplink load after the service is accessed. If the UL load of a cell is higher than this threshold after the access of an AMR speech service, this service will be rejected. If the UL load of a cell
0~100
0~1, step:0.01
8/7/2013
10453267
162734118.xls.ms_office1
The percentage of the handover service admission threshold to the 100% uplink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the handover admission. That is, when a service is handing over to ADD a cell, the RNC Interval CELLCAC(Opti evalutates the Type onal) measurement value of the uplink load after the service is accessed. If the UL load of a cell is higher than this threshold after the access, this service will be rejected. If the UL load of a cell will not be higher than this threshold, this
0~100
0~1, step:0.01
8/7/2013
10463267
162734118.xls.ms_office1
The percentage of the conversational non-AMR service threshold to the 100% uplink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the non-AMR service admission. That is, when a nonADD AMR service is Interval CELLCAC(Opti accessing, the Type onal) RNC evalutates the measurement value of the uplink load after the service is accessed. If the UL load of a cell is higher than this threshold after the access of a nonAMR speech service, this service will be rejected. If the UL load of a cell
0~100
0~1, step:0.01
8/7/2013
10473267
162734118.xls.ms_office1
The percentage of other service thresholds to the 100% uplink load. The services refer to other admissions except the conversational AMR service, conversational non-AMR service, and handover scenarios. It is applicable to ADD algorithm 1 and Interval CELLCAC(Opti algorithm 2. The Type onal) parameter is used for controlling other service admissions. That is, when a service is accessing, the RNC evalutates the measurement value of the uplink load after the service is accessed. If the UL load of a cell is higher than this threshold after the SET LDM(Optional) SET SATLDM(Opti onal) Length of smoothing filter Interval window of uplink Type OLC.
0~100
0~1, step:0.01
1~32
1~32
8/7/2013
10483267
162734118.xls.ms_office1
UL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the uplink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus ADD reducing the cell Interval CELLOLC(Opti uplink load. Type onal) The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of RABs selected in executing uplink
1~10
1~10
8/7/2013
10493267
162734118.xls.ms_office1
UL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the uplink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus ADD reducing the cell CELLOLC(Opti uplink load. onal) The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of uplink OLC fast TF restriction L3 filtering coefficient. The larger the value of this parameter, the stronger the smoothing effect SET and the higher the LDM(Optional) anti-slow-fading SET capability, but the SATLDM(Opti lower the signal onal) change tracing capability. For detailed information of this parameter, refer to 3GPP TS 25.433.
Interval Type
0~100
0~100
D0, D1, D2, D3, D4, D5, D6, D7, Enumeratio D8, D9, n Type D11, D13, D15, D17, D19
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
8/7/2013
10503267
162734118.xls.ms_office1
If the ratio of UL load of the cell to the uplink capacity is lower than this threshold, the UL overload and congestion control function of the cell is stopped. The lower the OLC trigger threshold is, the easier the system is in the ADD overload status. Interval CELLLDM(Opt An excessively Type ional) low value of the OLC trigger threshold is very detrimental to the system performance. The lower the OLC release threshold is, the harder the system releases the overload. The value of the OLC release threshold should not be much lower than
0~100
0~1, step:0.01
8/7/2013
10513267
162734118.xls.ms_office1
User release is an extreme method in reducing the cell load and recovering the system when the cell is overloaded and congested. The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on UL OLC traff ADD the action rules to Interval UlOlcTraffRe release RAB CELLOLC(Opti perform this Type lRabNum number onal) action. This parameter defines the maximum number of RABs released in executing uplink OLC service release. For the users of a single service, the releasing of RABs means the complete releasing of the users. The SET LDM(Optional) UL OLC trigger Interval SET hysteresis. Type SATLDM(Opti onal)
0~10
0~10
1~6000
10~60000, step:10
8/7/2013
10523267
162734118.xls.ms_office1
If the ratio of UL load of the cell to the uplink capacity is not lower than this threshold, the UL overload and congestion control function of the cell is triggered. The lower the OLC trigger threshold is, the easier the system is in the ADD overload status. Interval CELLLDM(Opt An excessively Type ional) low value of the OLC trigger threshold is very detrimental to the system performance. The lower the OLC release threshold is, the harder the system releases the overload. The value of the OLC release threshold should not be much lower than
0~100
0~1, step:0.01
8/7/2013
10533267
162734118.xls.ms_office1
Number of users selected in a UL LDR PS domain inter-RAT SHOULDBE load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis ADD of the actual CELLLDR(Opti circumstances. If UL PS should UlPSInterRat onal) the high-rate Interval be HO user ShouldBeHO ADD subscribers Type number UeNum NODEBLDR(O occupy a high ptional) proportion, set the parameter to a comparatively low value. If the high-rate subscribers occupy a low proportion, set the parameter to a comparatively high value. Because the basic congestion control algorithm
1~10
1~10
8/7/2013
10543267
162734118.xls.ms_office1
Number of users selected in a UL LDR PS domain inter-RAT SHOULDNOTB E load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis of the actual circumstances. If the high-rate subscribers occupy a high proportion, set the parameter to a comparatively low value. If the high-rate subscribers occupy a low proportion, set the parameter to a comparatively high value. Because the basic congestion Rate adjustment switch of link stability control for UL QoS of AMR services. When the parameter is set to YES, UL rate of AMR services can be adjusted. Inter-frequency handover switch of link stability control for UL QoS of AMR services. When the parameter is set to YES, interfrequency handover can be performed for AMR services to ensure the QoS.
ADD CELLLDR(Opti UL PS should UlPSInterRat onal) not be HO user ShouldNotHO ADD number UeNum NODEBLDR(O ptional)
Interval Type
1~10
1~10
NO, YES
InterFreq HO SET UlQosAmrInt For Switch For QOSACT(Optio erFreqHoSwit Uplink AMR nal) ch
NO, YES
8/7/2013
10553267
162734118.xls.ms_office1
Inter-RAT handover switch of link stability control for UL QoS of AMR InterRat HO SET services. When UlQosAmrInt Switch For QOSACT(Optio the parameter is Enumeratio NO, YES erRatHoSwitc Uplink AMR nal) set to YES, inter- n Type h RAT handover can be performed for AMR services to ensure the QoS. Timer length for uplink Qos measurement. This parameter controls the time lengths for the inter-frequency and inter-RAT measurement based on Qos. After interfrequency or interRAT ADD measurement CELLQOSHO( starts, if no interUp Link Qos Optional) frequency Interval ULQosMcTi Measure timer 0~512 SET handover is Type merLen length QOSHO(Option performed when al) this timer expires, the measurement is stopped, and the compressed mode is deactivated, if any. If this parameter is set to 0, this indicates that the timer will not be started. For the interfrequency or interRAT
NO, YES
0~512
8/7/2013
10563267
162734118.xls.ms_office1
Inter-frequency handover switch of link stability control for UL QoS of VP services. When the parameter is set to YES, interfrequency handover can be performed for VP services to ensure the QoS. Rate adjustment switch of link stability control for UL QoS of WAMR services. When the parameter is set to YES, UL rate of WAMR services can be adjusted. Inter-frequency handover switch of link stability control for UL QoS of WAMR services. When the parameter is set to YES, interfrequency handover can be performed for WAMR services to ensure the QoS. Inter-RAT handover switch of link stability control for UL QoS of WAMR services. When the parameter is set to YES, interRAT handover can be performed for WAMR services to ensure the QoS.
NO, YES
NO, YES
InterFreq HO SET UlQosWAmrI Switch For QOSACT(Optio nterFreqHoS Uplink nal) witch WAMR
NO, YES
NO, YES
8/7/2013
10573267
162734118.xls.ms_office1
This parameter determines whether the UL rate is lowered to the minimum rate in one step or two steps for BE service set up on DCH in uplink. This parameter determines whether the UL rate is raised to the maximum rate in one step or two steps for BE service set up on DCH in uplink. CM implementation approach selection basis. When the uplink spreading factor is greater than or equal to this parameter value, the SF/2 approach will be preferred. Otherwise, the high layer scheduling will be preferred. The SF/2 approach consumes more system resources and therefore this approach is recommended only for low-rate users. The highlayer scheduling requires variable multiplexing positions of transport channels and is applicable to a relatively narrow range. In
SET DCCC(Optional )
2_Rates, 3_Rates
SET DCCC(Optional )
2_Rates, 3_Rates
UL SF UlSFTurnPoi threshold nt
D8, D16, Enumeratio D32, D64, 8,16,32,64,1 n Type D128, D256 28,256
8/7/2013
10583267
162734118.xls.ms_office1
UL AF of UlSrbActFact SRB or
Interval Type
0~100
This parameter specifies the EDCH data transfer mode of SCHEDUL SCHEDUL SET SRB services. It Enumeratio ED, NON- ED, NONFRC(Optional) is valid only when n Type SCHEDUL SCHEDUL SRB services are ED ED mapped onto the E-DCH.
UL AF of R99 SET UL activity Interval UlStreamAF Streaming ADMCTRL(Op factor of the R99 Type service tional) streaming service.
0~100
This parameter specifies the default rate threshold for decision to use EDCH to carry UL PS domain D8, D16, streaming UL streaming SET D32, D64, services. When traffic FRCCHLTYPE UlStrThsOnH the maximum UL Enumeratio D128, threshold on PARA(Optional supa n Type D144, service rate is HSUPA ) D256, D384 higher than or equal to this threshold, the service will be carried on EDCH. Otherwise, it will be carried on DCH.
8/7/2013
10593267
162734118.xls.ms_office1
This parameter specifies the EDCH data Streaming transfer mode of traffic streaming SET UlStrTransM transmission services. It is FRC(Optional) odeOnHsupa mode on valid only when HSUPA streaming services are mapped onto the E-DCH. Measurement reporting threshold for triggering event 6A1. The event reporting mode is used. Event 6A1 is triggered when the measured ADD value is higher Uplink Event TYPRABQUA than the absolute UlThd6A1 6A1 Relative LITYMEAS(M threshold 6A1. Threshold andatory) This event can trigger UL QoS operation. This parameter specifies a relative threshold. Absolute threshold of 6A1 = Max Ul Tx Power UlThd6A1.
Interval Type
0~82
0~82
8/7/2013
10603267
162734118.xls.ms_office1
Measurement reporting threshold for triggering event 6A2. The event reporting mode is used. Event 6A2 is triggered when the measured value is higher than the absolute threshold 6A2. When this event report is received, UL rate of AMR or BE services cannot be raised. This parameter specifies a relative threshold. Absolute threshold of 6A2 = Max Ul Tx Power UlThd6A2. Measurement reporting threshold for triggering event 6B1. The event reporting mode is used. Event 6B1 is triggered when the measured value is lower than the absolute threshold 6B1. When this event report is received, UL QoS operation is stopped. This parameter specifies a relative threshold. Absolute threshold of 6B1 = Max Ul Tx Power -
UlThd6A2
Interval Type
0~82
0~82
UlThd6B1
Interval Type
0~82
0~82
8/7/2013
10613267
162734118.xls.ms_office1
Measurement reporting threshold for triggering event 6B2. The event reporting mode is used. Event 6B2 is triggered when the measured value is lower than the absolute ADD Uplink Event threshold 6B2. TYPRABQUA Interval 6B2 Relative When this event LITYMEAS(M Type Threshold report is received, andatory) UL rate of AMR or BE services can be raised. This parameter specifies a relative threshold. Absolute threshold of 6B2 = Max Ul Tx Power UlThd6B2.
UlThd6B2
0~82
0~82
8/7/2013
10623267
162734118.xls.ms_office1
When the algorithm 2 is used, this parameter defines the total equivalent user numbers corresponding to the 100% uplink load. The parameter should be related to the admission threshold and UL total ADD actual condition Interval UlTotalEqUs equivalent user CELLCAC(Opti of the network. If Type erNum number onal) the value is too high, the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the possibility of user rejects may increase, resulting in waste in idle resources. This parameter specifies the step size of the closedloop power SET control performed Interval FRC(Optional) on UL DPCH. Type For details of this parameter, refer to the 3GPP TS 25.214.
1~200
1~200
1~2
1~2
8/7/2013
10633267
162734118.xls.ms_office1
Duration when the measured value of VP keeps fulfilling the 6A1 measurement condition before the event 6A1 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Duration when the measured value of VP keeps fulfilling the 6B1 measurement condition before the event 6B1 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.
D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
8/7/2013
10643267
162734118.xls.ms_office1
Duration when the measured value of VP keeps fulfilling the 6D measurement condition before the event 6D is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Estimated altitude of an uncertain area in the cell center in the WGS-84 coordinates. This is controlled by MTRLGY and valid when MET~0(metric system). This parameter specifies the estimated altitude of an uncertain area in the cell center in the WGS-84 coordinates. This is controlled by MTRLGY and valid when IMP~1(British measurement).
D0, D10, D20, D40, D60, D80, D100, D120, D160, Enumeratio D200, n Type D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
Interval Type
0~990
0~990
Interval Type
0~3248
0~3248
8/7/2013
10653267
162734118.xls.ms_office1
Length of the semi-major axis of an uncertain area in the cell ADD center. Interval SMLCCELL(O This is controlled Type ptional) by MTRLGY and valid when MET~0(metric system).
0~1800000 0~1800000
This parameter specifies the length of the semimajor axis of an ADD uncertain area in Interval SMLCCELL(O the cell center. Type ptional) This is controlled by MTRLGY and valid when IMP~1(British measurement).
0~5905440 0~5905440
Length of the semi-minor axis of an uncertain area in the cell ADD center. Interval SMLCCELL(O This is controlled Type ptional) by MTRLGY and valid when MET~0(metric system).
0~1800000 0~1800000
8/7/2013
10663267
162734118.xls.ms_office1
This parameter specifies the length of the semiminor axis of an ADD uncertain area in Interval SMLCCELL(O the cell center. Type ptional) This is controlled by MTRLGY and valid when IMP~1(British measurement).
0~5905440 0~5905440
UNILNKN
This parameter ADD specifies the Interval UNILNK(Mand number of a UNI Type atory) link.
0~167
This parameter specifies the coefficient of the maximum duration of each SET Up Limit counting. The Interval UpLimitCoun RNCMBMSPA Counting Time maximum Type tingTime RA(Optional) duration is MCCH modification period multiplied by this parameter.
2~20
2~20
UPPERANI
Upper Ani
ID of the upper ADD node when Interval ADJNODE(Ma ISROOTNODE is Type ndatory) NO.
0~1999
0~1999
8/7/2013
10673267
162734118.xls.ms_office1
Number of the upper class transport resource ADD group. This Interval RSCGRP(Mand parameter is valid Type atory) only when [ISFIRSTCLASS ] is NO.
0~119
0~119
UPPERVP
URA1
URA ID 1
This parameter specifies the ADD number of the ATMLOGICPO upper-level RT(Optional) logical port that carries the logical port to be added. A cell can belongs to multiple URAs. This parameter indicates the ID of the first URA that the cell belongs to. The URA is used only ADD by the UTRAN QUICKCELLS and not known by ETUP(Mandato the CN. When the ry) UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331.
Interval Type
128~447
Interval Type
0~65535
0~65535
8/7/2013
10683267
162734118.xls.ms_office1
A cell can belongs to multiple URAs. This parameter indicates the ID of the second URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331. A cell can belongs to multiple URAs. This parameter indicates the ID of the third URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331.
URA2
URA ID 2
Interval Type
0~65535
0~65535
URA3
URA ID 3
Interval Type
0~65535
0~65535
8/7/2013
10693267
162734118.xls.ms_office1
A cell can belongs to multiple URAs. This parameter indicates the ID of the fourth URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331. A cell can belongs to multiple URAs. This parameter indicates the ID of the fifth URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331.
URA4
URA ID 4
Interval Type
0~65535
0~65535
URA5
URA ID 5
Interval Type
0~65535
0~65535
8/7/2013
10703267
162734118.xls.ms_office1
A cell can belongs to multiple URAs. This parameter indicates the ID of the sixth URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331. A cell can belongs to multiple URAs. This parameter indicates the ID of the seventh URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331.
URA6
URA ID 6
Interval Type
0~65535
0~65535
URA7
URA ID 7
Interval Type
0~65535
0~65535
8/7/2013
10713267
162734118.xls.ms_office1
A cell can belongs to multiple URAs. This parameter indicates the ID of the eighth URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331. ID of the URA in a cell. The URA is only used by the UTRAN and the CN does not know the URA. The URA consists of multiple cells. When the UE enters the URAPCH state, the location of the UE is identified with the URA ID. For details, refer to the 3GPP TS 25.331 protocol. Number of UTRAN Registration Areas (URAs) which the cell belongs to.
URA8
URA ID 8
Interval Type
0~65535
0~65535
URAId
URA ID
Interval Type
0~65535
0~65535
URANUM
D1, D2, D1, D2, Enumeratio D3, D4, D5, D3, D4, D5, n Type D6, D7, D8 D6, D7, D8
8/7/2013
10723267
162734118.xls.ms_office1
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of Ec/No for CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to Interval EVENT_TRIGG Type ER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event 2B can be triggered only
ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)
-24~0
-24~0
8/7/2013
10733267
162734118.xls.ms_office1
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of RSCP for CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to Interval EVENT_TRIGG Type ER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event 2B can be triggered only
ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)
-115~-25
-115~-25
8/7/2013
10743267
162734118.xls.ms_office1
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of Ec/No for PS domain HSPA services. For HSPA services, if the value of [Interfrequency measure report mode] is set to Interval EVENT_TRIGG Type ER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event 2B can be triggered only
ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)
-24~0
-24~0
8/7/2013
10753267
162734118.xls.ms_office1
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of RSCP for PS domain HSPA services. For HSPA services, if the value of [Interfrequency measure report mode] is set to Interval EVENT_TRIGG Type ER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event 2B can be triggered only
ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)
-115~-25
-115~-25
8/7/2013
10763267
162734118.xls.ms_office1
This parameter configures the used frequency measurement quantity to trigger the inter-RAT measurement for the purpose of Qos-based handover. The parameter is valid when the event reporting mode is ADD selected for inter3A Used-Freq CELLQOSHO( RAT. CPICH_EC/ UsedFreqMea Measure Optional) Ec/No: signal-toCPICH_EC/ Enumeratio NO, sQuantityFor Quantity for SET noise ratio NO,CPICH n Type CPICH_RS Qos3A Qos QOSHO(Option RSCP: received _RSCP CP al) signal code power CPICH_Ec/NO: the measurement quantity used for event 2D and 2F, with unit of dB CPICH_RSCP: the measurement quantity used for event 2D and 2F, with unit of dBm The RNC, in the coverage-based inter-RAT
8/7/2013
10773267
162734118.xls.ms_office1
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of Ec/No for PS domain non-HSPA services. For PS domain non-HSPA services, if the value of [Interfrequency Interval measure report Type mode] is set to EVENT_TRIGG ER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event
ADD CELLINTERFR EQHOCOV(Op tional) SET Inter-freq R99 INTERFREQH PS Used OCOV(Optional UsedFreqR99 frequency ) PsThdEcN0 trigger Ec/No ADD THD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)
-24~0
-24~0
8/7/2013
10783267
162734118.xls.ms_office1
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of RSCP for PS domain non-HSPA services. For PS domain non-HSPA services, if the value of [Interfrequency Interval measure report Type mode] is set to EVENT_TRIGG ER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event
ADD CELLINTERFR EQHOCOV(Op tional) SET Inter-freq R99 INTERFREQH PS Used OCOV(Optional UsedFreqR99 frequency ) PsThdRSCP trigger RSCP ADD THD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)
-115~-25
-115~-25
USEFE
ADD This parameter Disable, Use FE or not NODEBESN(M specifies whether Enumeratio Enable andatory) to use FE or not. n Type
Disable, Enable
UseMacehs
This parameter specifies whether Enumeratio NOTUSED, NOTUSED, the Mac-ehs n Type USED USED entity is applied.
8/7/2013
10793267
162734118.xls.ms_office1
USEMP
ADD This parameter Disable, Use MP or not NODEBESN(M specifies whether Enumeratio Enable andatory) to use MP or not. n Type
Disable, Enable
This parameter Use the ADD specifies whether Disable, USENBLB2 second Serial NODEBESN(O Enumeratio to use the second Enable Number or not ptional) n Type ESN or not.
Disable, Enable
UseOfHcs
Use of HCS
Indicating whether HCS is USED, USED, used. For details, Enumeratio NOT_USE NOT_USE refer to 3GPP TS n Type D D 25.304.
USEPPP
ADD This parameter Disable, NODEBESN(M specifies whether Enumeratio Enable andatory) to use PPP or not. n Type
Disable, Enable
8/7/2013
10803267
162734118.xls.ms_office1
The ratio of the users which could launch the handover to interRAT neighbour cell. When the parameter is ALL_USER, it means all of the users could be handover to the inter-RAT ALL_USER neighbour cell. (All User), ADD When the HALF(Half ALL_USER CELLMBDRIN parameter is ), UserPercenta UserPercentag Enumeratio ,HALF,THI TERRAT(Optio HALF, it means THIRD(TH ge e n Type RD, nal) only 1/2 of the IRD), QUARTER users could be QUARTER handover to the (QUARTE inter-RAT R) neighbour cell. When the parameter is THIRD, it means only 1/3 of the users could be handover to the inter-RAT neighbour cell. When the parameter is Percentage of SET Percentage of User Plane USERPLNSHA User Plane UserPlnShari Sharing Out REPARA(Optio Sharing Out ngOutOffset Offset nal) Offset.
Interval Type
5~20
5~20
Percentage of SET Percentage of User Plane USERPLNSHA User Plane UserPlnShari Sharing Out REPARA(Optio Sharing Out ngOutThd threshold nal) threshold.
Interval Type
50~100
50~100
8/7/2013
10813267
162734118.xls.ms_office1
SET SCHEDULEPR IOMAP(Mandat ory) SET USERGBR(Ma ndatory) SET FACHBANDW IDTH(Mandator y) SET USERHAPPYB R(Mandatory)
UserPriority
User Priority
This parameter specifies the user priority. The user GOLD, classes in Enumeratio SILVER, descending order n Type COPPER of priority are Gold, Silver, and then Copper.
This parameter ADD specifies whether Disable, NODEBESN(M Enumeratio to use TRUNK or Enable andatory) n Type not.
Disable, Enable
UT
Rate unit
This parameter ADD specifies the unit CELL/S, ATMTRF(Opti of the peak rate, Enumeratio KBIT/S onal) average rate, and n Type minimum rate.
CELL/S, KBIT/S
VCI
Bearing VCI
VCI of the PVC ADD from which the Interval AAL2PATH(M AAL2 Path goes Type andatory) out of the RNC.
32~65535
32~65535
8/7/2013
10823267
162734118.xls.ms_office1
VCLTYPE
This parameter ACT CC, CC, specifies the type VCL act type VCLCC(Manda Enumeratio LOOPBAC LOOPBAC of check on the tory) n Type K K VCL.
VLANFlAG
ADD SCTPLNK(Opti onal) VLANID Flag VLAN ID flag. ADD IPPATH(Option al)
8/7/2013
10833267
162734118.xls.ms_office1
VLANID
VLAN ID
ADD VLANID(Mand atory) ADD IPPATH(Manda tory) ADD SCTPLNK(Man datory) ADD ETHMA(Mand atory)
Interval Type
2~4094
2 to 4094
VLANPRI
VLAN Priority
Interval Type
0~7
0 to 7
8/7/2013
10843267
162734118.xls.ms_office1
VOICEDL
ADD AMR voice Interval TRMFACTOR( service downlink Type Optional) factor.
0~100
0~100
8/7/2013
10853267
162734118.xls.ms_office1
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF
ADD AMR voice Interval LOADEQ(Opti primary path load Type onal) threshold.
0~100
0~100
8/7/2013
10863267
162734118.xls.ms_office1
ADD AMR voice AMR voice VOICESECP TRMMAP(Opti secondary path secondary path. ATH onal)
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Enumeratio AF43, EF, n Type LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR,RT_V BR,NRT_V BR,UBR,B E,AF11,AF 12,AF13,A F21,AF22, AF23,AF31 ,AF32,AF3 3,AF41,AF 42,AF43,EF ,LQBE,LQ AF11,LQA F12,LQAF1 3,LQAF21, LQAF22,L QAF23,LQ AF31,LQA F32,LQAF3 3,LQAF41, LQAF42,L QAF43,LQ EF,NULL
VOICESEC WHT
AMR voice ADD primary LOADEQ(Opti secondary path onal) load ratio threshold.
Interval Type
0~100
0~100
8/7/2013
10873267
162734118.xls.ms_office1
VOICEUL
AMR voice ADD AMR voice service uplink TRMFACTOR( service uplink factor Optional) factor.
Interval Type
0~100
0~100
This parameter specifies the channel type of VoIP services. - DCH: Both uplink and downlink are DCH(UL_D preferably carried CH,DL_DC on DCH. SET H), DCH, - HSDPA: Uplink VOIP channel FRCCHLTYPE HSDPA(UL VoipChlType Enumeratio HSDPA, is preferably type PARA(Optional _DCH,DL_ HSPA carried on DCH, n Type ) HSDSCH), and downlink is HSPA(UL_ preferably carried EDCH,DL_ on HS-DSCH. HSDSCH) - HSPA: Uplink is preferably carried on EDCH, and downlink is preferably carried This parameter SET decides E-DCH FRC(Optional) TTI type for VOIP traffic.
8/7/2013
10883267
162734118.xls.ms_office1
This parameter Enable Alarm specifies whether ADD VOL24_MAS Reporting for the alarm EMU(Optional) K 24V Power reporting for 24 V power is enabled. This parameter Upper Limit specifies the ADD VOL24_THD of Alarm for upper threshold EMU(Optional) _HIGH 24V Power for 24 V power alarm. This parameter Lower Limit specifies the ADD VOL24_THD of Alarm for lower threshold EMU(Optional) _LOW 24V Power for 24 V power alarm. This parameter Enable Alarm specifies whether ADD VOL48_MAS Reporting for the alarm EMU(Optional) K 48V Power reporting for 48 V power is enabled. This parameter Upper Limit specifies the ADD VOL48_THD of Alarm for upper threshold EMU(Optional) _HIGH 48V Power for 48 V power alarm. This parameter Lower Limit specifies the ADD VOL48_THD of Alarm for lower threshold EMU(Optional) _LOW 48V Power for 48 V power alarm. This parameter ADD Cross connect specifies the VPCLCXN VPCLCX(Optio index index of a cross nal) connection.
String Type -
String Type -
1~9 character
String Type -
String Type -
1~9 character
Interval Type
0~1399
0 to 1399
VPI
Bearing VPI
VPI of the PVC ADD from which the AAL2PATH(M AAL2 Path goes andatory) out of the RNC.
Interval Type
0~255
0~255
8/7/2013
10893267
162734118.xls.ms_office1
This switch defines whether a video phone is barred in a cell. If a video phone is allowed in a confidential zone such as a military exclusive zone, the phone can be used for shoot in the confidential zone. Therefore, the operator can reject video phone services in the cell by enabling the switch. When the parameter is set to YES, the QOS control algorithm is used for VP services. When the parameter is set to NO, the QOS control algorithm is not used for VP services.The QOS action of VP services only includes inter frequency handover. Threshold of VP call drop ratio per SPU to report KPI alarm.In a checking period, if the ratio is higher than this threshold and the number of VP call release is higher than the related threshol, the KPI alarm of VP call drop ratio is reported.
VPLimitInd
ADD QUICKCELLS ETUP(Optional) ADD Cell VP limit CELLSETUP(O indicator ptional) ADD NRNCCELL(O ptional)
TRUE, FALSE
NO, YES
Interval Type
0~100
0~100
8/7/2013
10903267
162734118.xls.ms_office1
The minimum number of VP RAB establish request per SPU to report KPI alarm. In a checking period,if Minimum the number of VP SET Number of VP RAB establish Interval VpRabEstAtt KPIALMTHD( RAB Establish request is higher Type MinNum Optional) Request than the threshold and the VP RAB setup successful ratio is lower than this threshold,the KPI alarm of VP RAB setup ratio is reported. Threshold of VP RAB setup successful ratio per SPU to report KPI alarm. In a checking period,if the ratio is lower Threshold of SET than this VP RAB Setup VpRabEstSuc KPIALMTHD( threshold and the Successful cRatioThd Optional) number of VP Ratio RAB establish request is higher than the related threshold,the KPI alarm of VP RAB setup ratio is reported. The minimum number of VP call release per SPU to report KPI alarm.In a checking period, if the number of Minimum SET VP call release is VpRabRelMi Number of VP KPIALMTHD( higher than the nNum Call Release Optional) related threshold and the VP call drop ratio is higher than this threshold, the KPI alarm of VP call drop ratio is reported.
0~65534
0~65534
Interval Type
0~100
0~100
Interval Type
0~65534
0~65534
8/7/2013
10913267
162734118.xls.ms_office1
Timer for triggering a second adjustment of the UL WAMR mode. This parameter specifies the duration of waiting for the voice quality enhanced acknowledgement after the UL WAMR mode Wait Timer SET adjustment when WAmrUlRate For WAMR QOSACT(Optio the associated AdjTimerLen Uplink nal) command is delivered. The UL WAMR rate adjust timer starts when AMRC mode adjustment procedure is triggered, and stops when the next measurement report is received. If no measurement report is received when the UL This parameter Enable Water specifies whether ADD WATER_MA Alarm the alarm EMU(Optional) SK Reporting reporting for water is enabled.
Interval Type
20~64000
20~64000
8/7/2013
10923267
162734118.xls.ms_office1
This parameter is used to determine the relative threshold of the soft handover based on the measurement of each cell in the active set. The larger the value of the parameter is, the higher the relative threshold ADD is under the same CELLINTRAF conditions. When REQHO(Option Weight is set to 0, Interval al) the SHO relative Type SET threshold depends INTRAFREQH on only the best O(Optional) cell of the active set. For the definition, refer to 3GPP TS 25.331. When the parameter equals 0, the general quality of the active set is the measurement of the best cell and the SHO relative threshold depends
Weight
Weighted factor
0~20
0~2,Step:0. 1
8/7/2013
10933267
162734118.xls.ms_office1
Weight used for computing frequency general quality. The larger the value of this parameter, the higher the calculated general quality of the active set. When this parameter is set to 0, the general quality of the active set is the quality of the best cell in the active set. For details about this parameter, refer to the subsection of frequency quality estimation in the section of inter-frequency measurement in 3GPP TS 25.331. This parameter is used for all eventtriggered interfrequency measurements, Size of the sliding window.It can be used to control the transmission rate of the peer end.
ADD CELLINTERFR EQHOCOV(Op tional) SET INTERFREQH OCOV(Optional ) ADD CELLINTERR ATHOCOV(Op tional) SET INTERRATHO COV(Optional)
Interval Type
0~20
0~2,Step:0. 1
Interval Type
1~32767
1~32767
WKMODE
Work mode
M3UA_AS P, M3UA_IPS M3UA_AS P Enumeratio P, (For details n Type M3UA_IPS of ASP and P IPSP, refer to RFC4666.)
8/7/2013
10943267
162734118.xls.ms_office1
Active(For This parameter FMT mat active specifies the flag DATA(Optional Enumeratio area), Active,Stan of the workspace ) n Type Standby(For dby to be formatted. mat standby area)
This parameter specifies the work E1_UNBA( mode. The setting E1 E1_UNBA, SET of this parameter Unbalance), Enumeratio E1_BA, T1, E1T1(Optional) should be E1_BA(E1 n Type E1 consistent with Balance), that at the peer T1(T1), end. E1(E1)
WTRT
WTR Time
This parameter SET specifies the time Interval MSP(Optional) to wait before the Type restoration.
30~60000
30 to 60000
8/7/2013
10953267
162734118.xls.ms_office1
This parameter specifies the X offset for connected mode. For a PTM service in a cell, X UEs that receive this service need to SET retain in RNCMBMSPA connected mode, RA(Optional) so as to reduce triggering of counting on the Uu interface during recounting. The value of X = [PARA]NCountin gThd[/PARA] + [PARA] For the PS BE service at a rate of 0 kbit/s, this parameter is used for the rate upsizing for DCCC triggered by event 4A. Unsuccessful rate upsizing indicates that the resources SET are insufficient in COIFTIMER(O the cell. The ptional) service may run at a rate of 0 kbit/s for a long time. If the timer is started, the 0 kbit/s service of the UE is released after the timer expires. If the length is set to 0, the timer is not started.
XOffset
X Offset
Interval Type
1~5
1~5
Release 0 kbit/s Timer ZeroRateUpF length for ailToRelTime failed to rate rLen up
Interval Type
0~65535
0~65535
8/7/2013
10963267
162734118.xls.ms_office1
GMT1200(GMT12:00), GMT1100(GMT11:00), GMT1000(GMT10:00), GMT0930(GMT09:30), GMT0900(GMTThis parameter 09:00), specifies the time GMTEnumeratio zone where the 0800(GMTn Type RNC located. 08:00), GMT0700(GMT07:00), GMT0600(GMT06:00), GMT0500(GMT05:00), GMT0430(GMT04:30), GMT0400(GMTGMT1200(GMT12:00), GMT1100(GMT11:00), GMT1000(GMT10:00), GMT0930(GMT09:30), GMT0900(GMT09:00), GMT0800(GMT08:00), GMT0700(GMT07:00), GMT0600(GMT06:00), GMT0500(GMT05:00), GMT0430(GMT04:30), GMT0400(GMT-
ZONET
TimeZone
SET TZ(Optional)
8/7/2013
10973267
162734118.xls.ms_office1
Unit
Default Value Recommended Value Impact Parameter ServiceRelationship Interrupted During Interruption Modification Interruption Scope Duration(Min) Caution N (No impact on the UE in idle mode) The parameter modificatio n has no impact on
None
None
AAL2 Path
None
AAL2 Path
Not involved
None
RNC
None
Cell
None
Cell
None
Cell
None
Cell
This paramter must be configured when [PARA]Re HostPolicy[/ PARA] is set to REHOSTD ELAY. The ASCs are configured through [MML]AD D PRACHAS C[/MML]. The ASCs are configured through [MML]AD D PRACHAS C[/MML]. The ASCs are configured through [MML]AD D PRACHAS C[/MML]. The ASCs are configured through [MML]AD D PRACHAS C[/MML].
Not involved
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
Not involved
Not involved
Not involved
8/7/2013
10983267
162734118.xls.ms_office1
The ASCs are configured through [MML]AD D PRACHAS C[/MML]. The ASCs are configured through [MML]AD D PRACHAS C[/MML]. The ASCs are configured through [MML]AD D PRACHAS C[/MML].
None
Cell
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
Cell
Not involved
None
Cell
Not involved
None
None
Physical channel
None
Not involved
Not involved
Not involved
None
Enable
Enable
None
Not involved
Not involved
Not involved
8/7/2013
10993267
162734118.xls.ms_office1
ms
50
RNC
None
Not involved
Not involved
100
RNC
When [PARA]Dsa cAutoSwitc h[/PARA] is set to ON,the parameter need configure;el se,need not configure.
Not involved
Not involved
8/7/2013
11003267
162734118.xls.ms_office1
When [PARA]Dsa cAutoSwitc h[/PARA] is set to ON,the parameter need configure;el se,need not configure. If [MML]AD D CELLDSA CMANUA LPARA[/M ML][PARA ]Restriction Type[/PAR A] value is RestrictionF ixed,need set AcRestricti on value;when [MML]AD D CELLDSA CMANUA LPARA[/M
None
AC0:BARR ED,AC1:B ARRED,A C2:BARRE D,AC3:BA RRED,AC4 :BARRED, AC5:BARR ED,AC6:B ARRED,A RNC C7:BARRE D,AC8:BA RRED,AC9 :BARRED( SET DSACAUT OALGO) None(ADD CELLDSA CMANUA LPARA)
Not involved
Not involved
8/7/2013
11013267
162734118.xls.ms_office1
None
None
RNC
If [MML]AD D CELLDSA CMANUA LPARA[/M ML][PARA ]Restriction Type[/PAR A] value is RestrictionF ixed,need set AcRestricti on value;when [MML]AD D CELLDSA CMANUA LPARA[/M ML][PARA ]Restriction Type[/PAR A] value is RestrictionF lexible,no need set AcRestricti on value.
Not involved
Not involved
8/7/2013
11023267
162734118.xls.ms_office1
When [PARA]Dsa cAutoSwitc h[/PARA] is set to ON,the parameter need configure;el se,need not configure. If [MML]AD D CELLDSA CMANUA LPARA[/M ML][PARA ]Restriction Type[/PAR A] value is RestrictionF ixed,need set AcRestricti on value;when [MML]AD D CELLDSA CMANUA LPARA[/M
10(SET DSACAUT OALGO) 30(SET ACALGO) RNC None(ADD CELLDSA CMANUA LPARA)
Not involved
Not involved
8/7/2013
11033267
162734118.xls.ms_office1
per cent
RNC
None
Not involved
Not involved
None
OFF
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
The deleting operation can be done three minutes after ADD GPS operation.
8/7/2013
11043267
162734118.xls.ms_office1
per cent
None
RNC
None
Subsystem
None
None
RNC
None
Not involved
Not involved
None
ACTIVE
ACTIVE
Cell
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
None
Not involved
Not involved
None
UE_BASE RNC D
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
The deleting operation can be done three minutes after ADD GPS operation.
8/7/2013
11053267
162734118.xls.ms_office1
1. When the value of [PARA]AG PSRECEIV ERTYPE[/P ARA] in [MML]AD D GPS[/MML ] is set to RNC, the GPS data report period, DGPS data report Not period, involved AGPS antenna latitude, AGPS antenna longitude, and AGPS antenna altitude should be set. 1. When the value of [PARA]AG PSRECEIV
1. The AGPS reference receiver can be added to an RNC or a NodeB according to [AGPS type]. If the AGPS type is RNC, the AGPS reference receiver is added to the RNC. If the AGPS type is NodeB, the AGPS reference receiver is added to the NodeB. 2. One RNC can be configured with one AGPS reference receiver at most while
None
None
RNC
Not involved
Not involved
8/7/2013
11063267
162734118.xls.ms_office1
dB
-6
-6
Cell
None
Not involved
None
Physical channel
None
Not involved
Not involved
Not involved
8/7/2013
11073267
162734118.xls.ms_office1
None
None
Not involved
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
None
RNC
None
Not involved
Not involved
kbit/s
None
When [PARA]BW MODE[/PA RA] in [MML]AD D RSCGRP[/ MML] is set to HALF_DU PLEX, this parameter is valid;if the [PARA]BW MODE[/PA Transmissio RA] in n resource [MML]AD group D RSCGRP[/ MML] of upper class and lower class RSCGRP is set to HALF_DU PLEX, the [PARA]All Bw[/PARA] in [MML]AD D
Not involved
Not involved
8/7/2013
11083267
162734118.xls.ms_office1
None
Automatic
Automatic
Cell
None
Not involved
Not involved
None
RNC
When the value of [PARA]PG PSRECEIV ERTYPE[/P ARA] in [MML]AD D GPS[/MML ] is selected, the ALTITUDE should be set.
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
8/7/2013
11093267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
None
This parameter is valid when [PARA]Inte rFreqReport Mode[/PAR A] is set to EVENT_T RIGGER.
Not involved
Not involved
8/7/2013
11103267
162734118.xls.ms_office1
None
Not involved
Not involved
8/7/2013
11113267
162734118.xls.ms_office1
None
This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to EVENT_T RIGGER.
Not involved
Not involved
8/7/2013
11123267
162734118.xls.ms_office1
None
Not involved
Not involved
None
None
RAB
This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM.
Not involved
Not involved
8/7/2013
11133267
162734118.xls.ms_office1
None
NO
RNC
None
Not involved
Not involved
None
40
RNC
None
Not involved
Not involved
None
100
RNC
None
Not involved
Not involved
8/7/2013
11143267
162734118.xls.ms_office1
None
60
RNC
None
Not involved
Not involved
None
200
RNC
None
Not involved
Not involved
8/7/2013
11153267
162734118.xls.ms_office1
ms
3000
RNC
Not involved
Not involved
8/7/2013
11163267
162734118.xls.ms_office1
The adjacent node is already configured by [MML]AD D ADJNODE[ /MML]. When the value of [PARA]LN KT[/PARA] in [MML]AC Not T involved VCLCC[/M ML] is set to AAL2PAT H, the adjacent node ID should be set. When the value of [PARA]LN KT[/PARA] in [MML]LOP
None
None
Adjacent Node(ACT VCLCC,A DD ADJMAP,A DD ADJNODE) AAL2 Path(LOP VCL,ADD AAL2PAT H) Services carried on the network element with the specific ATM address.(A DD AAL2RT) IP Path(ADD IPPATHBI ND,ADD IPPATH) IP path(ACT IPPM)
Not involved
Not involved
None
Cell
Not involved
Not involved
8/7/2013
11173267
162734118.xls.ms_office1
None
Cell
Not involved
Not involved
degree
None
Cell
Not involved
Not involved
8/7/2013
11183267
162734118.xls.ms_office1
second
None
Cell
Not involved
Not involved
degree
None
Cell
Not involved
Not involved
8/7/2013
11193267
162734118.xls.ms_office1
second
None
Cell
Not involved
Not involved
degree
None
Cell
Not involved
Not involved
degree
None
Cell
Not involved
Not involved
None
FALSE
FALSE
RNC
None
Not involved
Not involved
None
None
SCTP
None
Not involved
Not involved
Not involved
8/7/2013
11203267
162734118.xls.ms_office1
None
None
RAB
None.
Not involved
Not involved
None
ALL
ALL
RNC
None
Not involved
Not involved
Not involved
None
Primary
Primary
RNC
When the value of [PARA]OT [/PARA] in [MML]LO D PATCH[/M ML] Step_by_Ste p, the value of [PARA]AR EAFLAG[/ PARA] should be
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
8/7/2013
11213267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
8/7/2013
11223267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
Ethernet Port
When the value of [PARA]CH KTYPE[/P ARA] in [MML]STR IPCHK[/M Y ML] is set to ARP, the ARP packet resend times should be set.
Interrupt the service until the correct The service gateway is on the set or the Ethernet port Port. swapping or the changing of IP route is finished.
In order to modify this parameter, you must use the command [MML]STP IPCHK[/M ML] first and [MML]STR IPCHK[/M ML] next.
8/7/2013
11233267
162734118.xls.ms_office1
When the value of [PARA]CH KTYPE[/P ARA] in [MML]STR Not IPCHK[/M involved ML] is set to ARP, the ARP packet out-time should be set.
In order to modify this parameter, you must use the command [MML]STP IPCHK[/M ML] first and [MML]STR IPCHK[/M ML] next. The parameter modificatio n has no impact on the equipment. If the transport type of the NodeB is IUB-IP, the next hop IP address must be one of the following configured addresses: PPP link peer IP address, MLPPP group peer IP address, and the IP address in the same network segment as that of the FE/GE port.
ms
Ethernet Port
Not involved
Not involved
None
None
NodeB
None
Not involved
Not involved
Not involved
None
None
RNC
When the value of [PARA]NB TRANTP[/ PARA] in [MML]AD D NODEBIP[/ MML] is set to ATMTRAN S_IP or ATMANDI PTRANS_I P, this parameter should be set.
Not involved
Not involved
8/7/2013
11243267
162734118.xls.ms_office1
If the transport type of the NodeB is IUB-IP, the next hop IP address must be one of the following configured addresses: PPP link peer IP address, MLPPP group peer IP address, and the IP address in the same network segment as that of the FE/GE port.
None
None
RNC
When the value of [PARA]NB TRANTP[/ PARA] in [MML]AD D NODEBIP[/ MML] is set to ATMTRAN S_IP or ATMANDI PTRANS_I P, this parameter should be set.
Not involved
Not involved
None
ATT needs to be set when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to CS_DOMA IN; ATT does not need to be set when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to PS_DOMAI N.
N (For the UE in idle mode, indicating whether the Not MS can involved apply the IMSI attach/detac h procedure)
Not involved
The modificatio n of ATT is valid only when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to CS_DOMA IN.The parameter modificatio n has no impact on the equipment.
8/7/2013
11253267
162734118.xls.ms_office1
When the value of [PARA]AU THTYPE[/ PARA] in PPP [MML]AD Link(ADD D PPPLNK) PPPLNK[/ MLPPP Y MML] is set Group, PPP to PAP_V Link(ADD or MPGRP) CHAP_V, the AUTHMO DE should be set.
None
None
PPP link
The negotiation will be Interrupt successful the service only when until the negotiate parameter is successfully set the same again. with the local and peer device.
None
None
PPP link
The negotiation will be Interrupt successful the service only when until the negotiate parameter is successfully set the same again. with the local and peer device. The negotiation will be Interrupt successful the service only when until the negotiate parameter is successfully set the same again. with the local and peer device. The negotiation will be successful only when the parameter is set the same with the local and peer device.
None
None
PPP link
None
NO_V
NO_V
Not involved
Not involved
Not involved
8/7/2013
11263267
162734118.xls.ms_office1
None
ENABLE
Ethernet port
When the value of [PARA]PT YPE[/PAR A] in [MML]SET Y ETHPORT[ /MML] is set to FE,the self-confer parameter is valid.
Port
The modificatio n may affect the state of If the mode the port, is not may consistent, interrupt will service interrupt temply. If service until the it is modificatio consistent. n is not consistent, service may be interrupted.
None
Physical channel
[PARA]Ava ilablesignat ureEndInde x[/PARA] should be less than the number of preamble signatures. The preamble signature is configured by [PARA]Pre ambleSignat ures[/PARA ].
Not involved
8/7/2013
11273267
162734118.xls.ms_office1
None
Physical channel
[PARA]Ava ilablesignat ureStartInde x[/PARA] should be no greater than [PARA] Availablesi gnatureEndI ndex [/PARA].
Not involved
None
15
15
Physical channel
None
Not involved
None
None
RNC
None
Not involved
Not involved
8/7/2013
11283267
162734118.xls.ms_office1
None
None
SRB
None
Not involved
Not involved
Not involved
None
None
subrack
When the value of [PARA]SR T[/PARA] in [MML]SET CLK[/MML ] is set to Y RSS, the value of [PARA]BA CK8KCLK SW1[/PAR A] could be set.
RNC
Each 8 kHz clock of the backplane corresponds to only one clock source. The same 8 kHz Less than 5 clock switch minutes of the backplane cannot be turned on for multiple interface boards at the same time. Each 8 kHz clock of the backplane corresponds to only one clock source. The same 8 kHz Less than 5 clock switch minutes of the backplane cannot be turned on for multiple interface boards at the same time.
None
None
subrack
When the value of [PARA]SR T[/PARA] in [MML]SET CLK[/MML ] is set to Y RSS, the value of [PARA]BA CK8KCLK SW2[/PAR A] could be set.
RNC
8/7/2013
11293267
162734118.xls.ms_office1
dBm
61
61
Cell
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
Ethernet port
When the value of [PARA]MO DE[/PARA] in [MML]STR IPCHK[/M Not ML] is set involved to STANDBY, the backup port IP address should be set.
Not involved
Not involved
In order to modify this parameter, you must use the command [MML]STP IPCHK[/M ML] first and [MML]STR IPCHK[/M ML] next.
8/7/2013
11303267
162734118.xls.ms_office1
When the value of [PARA]MO DE[/PARA] in [MML]STR IPCHK[/M Not ML] is set involved to STANDBY, the backup port mask should be set. N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None
None
Ethernet port
Not involved
Not involved
In order to modify this parameter, you must use the command [MML]STP IPCHK[/M ML] first and [MML]STR IPCHK[/M ML] next. This parameter cannot be modified. This parameter cannot be modified.
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
-(ADD NRNCCEL L,ADD QUICKCE LLSETUP, ADD CELLSETU P) GSM900_D CS1800_B AND_USE D(ADD GSMCELL)
None(ADD NRNCCEL L,ADD QUICKCE LLSETUP, ADD CELLSETU Cell P) GSM900_D CS1800_B AND_USE D(ADD GSMCELL)
None
Cell
8/7/2013
11313267
162734118.xls.ms_office1
kbit/s
None
Not involved
Not involved
None
None
Cell
None
Not involved
Not involved
8/7/2013
11323267
162734118.xls.ms_office1
None
None
Cell
None
Not involved
Not involved
dB
Cell
None
Not involved
Not involved
8/7/2013
11333267
162734118.xls.ms_office1
dB
-30
-30
Cell
None
Not involved
Not involved
dB
-20
-20
Transport channel
None
N (Impact on cell system Not message involved receiving of UEs in idle mode)
Not involved
8/7/2013
11343267
162734118.xls.ms_office1
None
None
RNC
None.
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
RNC
None
Not involved
Not involved
RNC
None
Not involved
Not involved
RNC
None
Not involved
Not involved
8/7/2013
11353267
162734118.xls.ms_office1
kbit/s
D384
RNC
None
Not involved
Not involved
8/7/2013
11363267
162734118.xls.ms_office1
RNC
None
Not involved
Not involved
RNC
None
Not involved
Not involved
8/7/2013
11373267
162734118.xls.ms_office1
RNC
None
Not involved
Not involved
RNC
None
Not involved
Not involved
8/7/2013
11383267
162734118.xls.ms_office1
Valid when [PARA]BE QosPerform [/PARA] is set to YES; [PARA]Be DlAct2[/PA RA] and [PARA]Be DlAct3[/PA RA] must be None when [PARA]Be DlAct1[/PA RA] is set to None; [PARA]Be DlAct2[/PA RA] and [PARA]Be DlAct3[/PA RA] must not be equal with [PARA]Be DlAct1[/PA RA] when [PARA]Be DlAct1[/PA RA] is not set to None;
None
RateDegrad RNC e
Not involved
Not involved
8/7/2013
11393267
162734118.xls.ms_office1
Valid when [PARA]BE QosPerform [/PARA] is set to YES; [PARA]Be DlAct2[/PA RA] must be None when [PARA]Be DlAct1[/PA RA] is set to None; [PARA]Be DlAct2[/PA RA] must not be equal with [PARA]Be DlAct1[/PA RA] when [PARA]Be DlAct1[/PA RA] is not set to None; [PARA]Be DlAct3[/PA RA] must be None when [PARA]Be
None
None
RNC
Not involved
Not involved
8/7/2013
11403267
162734118.xls.ms_office1
Valid when [PARA]BE QosPerform [/PARA] is set to YES; [PARA]Be DlAct3[/PA RA] must be None when [PARA]Be DlAct1[/PA RA] or [PARA]Be DlAct2[/PA RA] is set to None; [PARA]Be DlAct3[/PA RA] must not be equal with [PARA]Be DlAct1[/PA RA] when [PARA]Be DlAct1[/PA RA] is not set to None. [PARA]Be DlAct3[/PA RA] must
None
None
RNC
Not involved
Not involved
8/7/2013
11413267
162734118.xls.ms_office1
RNC
None
Not involved
Not involved
byte
D1024
RNC
The following relationship must be satisfied: [PARA]Be H2FTvmTh d[/PARA] < [PARA]Be EFach2Cpc TvmThd[/P ARA].
Not involved
Not involved
8/7/2013
11423267
162734118.xls.ms_office1
ms
D0
RNC
None
Not involved
Not involved
byte
D1024
RNC
The following relationship must be satisfied: [PARA]D2 F2PTvmTh d[/PARA] < [PARA]Be EFach2DTv mThd[/PAR A].
Not involved
Not involved
8/7/2013
11433267
162734118.xls.ms_office1
ms
D0
RNC
None
Not involved
Not involved
byte
D1024
RNC
The following relationship must be satisfied: [PARA]Be H2FTvmTh d[/PARA] < [PARA]Be EFach2HTv mThd[/PAR A].
Not involved
Not involved
8/7/2013
11443267
162734118.xls.ms_office1
ms
D0
RNC
None
Not involved
Not involved
byte
D1024
RNC
None
Not involved
Not involved
8/7/2013
11453267
162734118.xls.ms_office1
ms
D0
RNC
None
Not involved
Not involved
byte
D1024
RNC
The following relationship must be satisfied: [PARA]Be H2FTvmTh d[/PARA] < [PARA]Be F2CpcTvm Thd[/PARA ].
Not involved
Not involved
8/7/2013
11463267
162734118.xls.ms_office1
ms
D0
RNC
None
Not involved
Not involved
byte
D1024
RNC
The following relationship must be satisfied: [PARA]D2 F2PTvmTh d[/PARA] < [PARA]F2 DTvmThd[/ PARA].
Not involved
Not involved
8/7/2013
11473267
162734118.xls.ms_office1
ms
D0
RNC
None
Not involved
Not involved
byte
D1024
RNC
None
Not involved
Not involved
8/7/2013
11483267
162734118.xls.ms_office1
ms
D0
RNC
None
Not involved
Not involved
byte
D1024
RNC
The following relationship must be satisfied: [PARA]Be H2FTvmTh d[/PARA] < [PARA]Be F2HTvmTh d[/PARA].
Not involved
Not involved
8/7/2013
11493267
162734118.xls.ms_office1
ms
D0
RNC
None
Not involved
Not involved
8/7/2013
11503267
162734118.xls.ms_office1
65535
RNC
None
Not involved
Not involved
8/7/2013
11513267
162734118.xls.ms_office1
RNC
None
Not involved
Not involved
8/7/2013
11523267
162734118.xls.ms_office1
RNC
None
Not involved
Not involved
ms
D1000
RNC
None
Not involved
Not involved
8/7/2013
11533267
162734118.xls.ms_office1
The following relationship must be satisfied: [PARA]Be H2FTvmTh d[/PARA] < [PARA]Be F2HTvmTh d[/PARA]; [PARA]Be H2FTvmTh d[/PARA] < [PARA]Be EFach2HTv mThd[/PAR A]; [PARA]Be H2FTvmTh d[/PARA] < [PARA]Be EFach2Cpc TvmThd[/P ARA]; [PARA]Be H2FTvmTh d[/PARA] < [PARA]Be F2CpcTvm Thd[/PARA
byte
D64
RNC
Not involved
Not involved
ms
D5000
RNC
None
Not involved
Not involved
8/7/2013
11543267
162734118.xls.ms_office1
kbit/s
D1440
RNC
None
Not involved
Not involved
20
RNC
Not involved
Not involved
dB
This parameter is available if Cell(ADD the value of CELLDCC [PARA]BE C) QosPerform RNC(SET [/PARA] in DCCC) [MML]SET QOSACT[/ MML] is YES.
Not involved
Not involved
8/7/2013
11553267
162734118.xls.ms_office1
None
YES
RNC
None
Not involved
Not involved
None
None
RAB
None
None
RAB
At least one of this parameter and the [PARA]Bet aD[/PARA] parameter must be set to 15. At least one of this parameter and the [PARA]Bet aC[/PARA] parameter must be set to 15.
Not involved
Not involved
Not involved
Not involved
8/7/2013
11563267
162734118.xls.ms_office1
Valid when [PARA]BE QosPerform [/PARA] is set to YES; [PARA]Be UlAct2[/PA RA] and [PARA]Be UlAct3[/PA RA] must be None when [PARA]Be UlAct1[/PA RA] is set to None; [PARA]Be UlAct2[/PA RA] and [PARA]Be UlAct3[/PA RA] must not be equal with [PARA]Be UlAct1[/PA RA] when [PARA]Be UlAct1[/PA RA] is not set to None;
None
None
RNC
Not involved
Not involved
8/7/2013
11573267
162734118.xls.ms_office1
Valid when [PARA]BE QosPerform [/PARA] is set to YES; [PARA]Be UlAct2[/PA RA] must be None when [PARA]Be UlAct1[/PA RA] is set to None; [PARA]Be UlAct2[/PA RA] must not be equal with [PARA]Be UlAct1[/PA RA] when [PARA]Be UlAct1[/PA RA] is not set to None. [PARA]Be UlAct3[/PA RA] must be None when [PARA]Be
None
None
RNC
Not involved
Not involved
8/7/2013
11583267
162734118.xls.ms_office1
Valid when [PARA]BE QosPerform [/PARA] is set to YES; [PARA]Be UlAct3[/PA RA] must be None when [PARA]Be UlAct1[/PA RA] or [PARA]Be UlAct2[/PA RA] is set to None; [PARA]Be UlAct3[/PA RA] must not be equal with [PARA]Be UlAct1[/PA RA] when [PARA]Be UlAct1[/PA RA] is not set to None. [PARA]Be UlAct3[/PA RA] must
None
None
RNC
Not involved
Not involved
8/7/2013
11593267
162734118.xls.ms_office1
None
SINGLE
RNC
Not involved
Not involved
None
YES
RNC
None
YES
RNC
Valid only when [PARA]BE QosPerform [/PARA] is set to YES and [PARA]Be UlEvTrigIn d[/PARA] is set to SINGLE. Valid only when [PARA]BE QosPerform [/PARA] is set to YES and [PARA]Be UlEvTrigIn d[/PARA] is set to SINGLE.
Not involved
Not involved
Not involved
Not involved
8/7/2013
11603267
162734118.xls.ms_office1
None
NO
RNC
Not involved
Not involved
ms
3000
RNC
Not involved
Not involved
None
When the value of [PARA]CH KTYPE[/P ARA] in [MML]STR Current IPCHK[/M BFD Not ML] is set communicat involved to SBFD or ion. MBFD, the times of outtime of BFD packet should be set.
Not involved
Not involved
8/7/2013
11613267
162734118.xls.ms_office1
kbit/s
32
32
Cell
This parameter must satisfy the following relationship: [PARA]BG MBR[/PAR A] >= [PARA]BG GBR[/PAR A].
Not involved
Not involved
kbit/s
512
512
Cell
This parameter must satisfy the following relationship: [PARA]BG MBR[/PAR A] >= [PARA]BG GBR[/PAR A].
Not involved
Not involved
8/7/2013
11623267
162734118.xls.ms_office1
dB
100
100
Cell
The value of this parameter must satisfy the following relationship relationship: [PARA][Bg nAbnormal Thd]>=[Bg nUpdateThd ][/PARA] .
Not involved
Not involved
120
120
Cell
None
Not involved
Not involved
8/7/2013
11633267
162734118.xls.ms_office1
None
06&00&00 Cell
The value of this parameter must satisfy the following relationship relationship: [PARA]Bg nEndTime[/ PARA] >[PARA]M BgnStartTi me[/PARA]
Not involved
Not involved
8/7/2013
11643267
162734118.xls.ms_office1
None
Cell
None
Not involved
Not involved
8/7/2013
11653267
162734118.xls.ms_office1
None
01&00&00 Cell
The value of this parameter must satisfy the following relationship relationship: [PARA]Bg nEndTime[/ PARA] >[PARA]M BgnStartTi me[/PARA]
Not involved
Not involved
None
ON
ON
Cell
None
Not involved
Not involved
8/7/2013
11663267
162734118.xls.ms_office1
dBm
Cell
The value of this parameter must satisfy the following relationship relationship: [PARA][Bg nAbnormal Thd]>=[Bg nUpdateThd ][/PARA] . This parameter is required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_DC H. The setting of the [PARA]Sir AdjustStep[ /PARA] parameter is associated with this parameter. Assume that this parameter is changed from BLERqualit y1 to BLERqualit y2 and [PARA]Sir AdjustStep[ /PARA] is
Not involved
Not involved
None
None
RAB
Not involved
Not involved
8/7/2013
11673267
162734118.xls.ms_office1
None
FALSE
FALSE
Cell
None
Not involved
Not involved
None
D2
RNC
None
Not involved
Not involved
8/7/2013
11683267
162734118.xls.ms_office1
ms
D250
RNC
None
Not involved
Not involved
None
None
Cell
This paramter is valid only N (No when is impact on [PARA]Bli the UE in ndHoFlag[/ idle mode) PARA] set to TRUE.
Not involved
Not involved
8/7/2013
11693267
162734118.xls.ms_office1
dBm
-92
-92
Cell
This paramter is valid only when [PARA]Bli ndHOFlag[/ PARA] is set to TRUE.
Not involved
Not involved
dBm
Not involved
Not involved
8/7/2013
11703267
162734118.xls.ms_office1
The modificatio n of the timer involves the peer end. For details, refer to ITUT Q2630.1/IT U-T Q2630.2. The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.
ms
5000
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
Board
None
Not involved
Not involved
Not involved
None
None
Board
None
Not involved
Not involved
Not involved
None
None
Ethernet port
None
Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.
8/7/2013
11713267
162734118.xls.ms_office1
None
REQUIRE D(ADD CELLMBD RINTERRA T,ADD CELLINTE RRATHOC OV,ADD REQUIRE CELLINTE D RRATHON COV) -(SET INTERRAT HOCOV,SE T INTERRAT HONCOV)
Cell(ADD CELLMBD RINTERRA T,ADD CELLINTE RRATHOC OV,ADD CELLINTE None RRATHON COV) RNC(SET INTERRAT HOCOV,SE T INTERRAT HONCOV)
Not involved
Not involved
None
None
E1/T1 link
None
Not involved
Not involved
Not involved
None
None
Cell
None
Cell
None
None
E1T1 Link
None
Not involved
Not involved
Not involved
8/7/2013
11723267
162734118.xls.ms_office1
When the value of [PARA]OT [/PARA] in [MML]LO D PATCH[/M ML] is set to Step_by_Ste p, the value of [PARA]BT[ /PARA] should be None
None
None
RNC
Not involved
None
None
board
RNC
None
None
E1T1 link
None
Not involved
Not involved
This Less than 5 parameter minutes cannot be modified. If a link is used, you cannot Not convert the involved link from E1 to T1, or from T1 to E1.
None
None
board
None
Not involved
Not involved
Not involved
None
None
RNC
When the value of [PARA]BT[ /PARA] in [MML]AD D IMAGRP[/ Not MML] is set involved to AEUa or AOUa, the IMA group number should be set. Not involved
Not involved
Not involved
None
None
Not involved
Not involved
8/7/2013
11733267
162734118.xls.ms_office1
None
None
LGC port
None
Not involved
None
OFF
OFF
LGC port
When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, the MAXBW and MINBW Not should be involved set. When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to OFF, the CIR should be set.
When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP Not ORT[/MML involved ] is set to ON, it may impact current users and bring flow control.
The auto adjust bandwidth parameter can be enabled only when the IPPATH over the logic port activate the IPPM function.
8/7/2013
11743267
162734118.xls.ms_office1
The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < forward congestion clear threshold, or forward handover reserved bandwidth = forward congestion threshold = forward congestion clear threshold = 0
kbit/s
PPP Link(ADD PPPLNK) IMA group(ADD IMAGRP) Fractional link(ADD FRALNK) None UNILNK(A DD UNILNK) MLPPP Group, PPP Link(ADD MPGRP)
Not involved
Not involved
Not involved
8/7/2013
11753267
162734118.xls.ms_office1
If [PARA]BW ADJ[/PAR A] is set to be ON,[PARA ]BWDHOR SVBW[/PA RA],[PARA ]BWDCON GBW[/PAR A],[PARA] BWDCON GCLRBW[/ PARA] must obey the following rules: [PARA]BW DHORSVB W[/PARA] < [PARA]BW DCONGB W[/PARA] < [PARA]BW DCONGCL RBW[/PAR A] < [PARA]MI
kbit/s
LGC port
Not involved
Not involved
kbit/s
LGC port
None
Not involved
8/7/2013
11763267
162734118.xls.ms_office1
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type
kbit/s
AAL2 Path
None
Not involved
Not involved
8/7/2013
11773267
162734118.xls.ms_office1
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type
kbit/s
IP Path
[PARA]BW DHORSVB W[/PARA]/ [PARA]BW DCONGB W[/PARA]/ [PARA]BW DCONGCL RBW[/PAR A] in [MML]AD D IPPATH[/ MML] must be all zero when [PARA]Rx Bw[/PARA] is zero,or [PARA]BW DHORSVB W[/PARA] < [PARA]BW DCONGB W[/PARA] < [PARA]BW DCONGCL RBW[/PAR A] <
Not involved
Not involved
8/7/2013
11783267
162734118.xls.ms_office1
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type
kbit/s
[PARA]BW DHORSVB W[/PARA]/ [PARA]BW DCONGB W[/PARA]/ [PARA]BW DCONGCL Transmissio RBW[/PAR n resource A] in group [MML]AD D RSCGRP[/ MML] must be all zero when [PARA]Rx Bw[/PARA] is zero.
Not involved
Not involved
8/7/2013
11793267
162734118.xls.ms_office1
The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < forward congestion clear threshold, or forward handover reserved bandwidth = forward congestion threshold = forward congestion clear threshold = 0
kbit/s
PPP Link(ADD PPPLNK) IMA group(ADD IMAGRP) Fractional link(ADD FRALNK) None UNILNK(A DD UNILNK) MLPPP Group, PPP Link(ADD MPGRP)
Not involved
Not involved
Not involved
8/7/2013
11803267
162734118.xls.ms_office1
If [PARA]BW ADJ[/PAR A] is set to be ON,[PARA ]BWDHOR SVBW[/PA RA],[PARA ]BWDCON GBW[/PAR A],[PARA] BWDCON GCLRBW[/ PARA] must obey the following rules: [PARA]BW DHORSVB W[/PARA] < [PARA]BW DCONGB W[/PARA] < [PARA]BW DCONGCL RBW[/PAR A] < [PARA]MI
kbit/s
LGC port
Not involved
Not involved
kbit/s
LGC port
None
Not involved
8/7/2013
11813267
162734118.xls.ms_office1
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type
kbit/s
AAL2 Path
None
Not involved
Not involved
8/7/2013
11823267
162734118.xls.ms_office1
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type
kbit/s
IP Path
[PARA]BW DHORSVB W[/PARA]/ [PARA]BW DCONGB W[/PARA]/ [PARA]BW DCONGCL RBW[/PAR A] in [MML]AD D IPPATH[/ MML] must be all zero when [PARA]Rx Bw[/PARA] is zero,or [PARA]BW DHORSVB W[/PARA] < [PARA]BW DCONGB W[/PARA] < [PARA]BW DCONGCL RBW[/PAR A] <
Not involved
Not involved
8/7/2013
11833267
162734118.xls.ms_office1
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type
kbit/s
[PARA]BW DHORSVB W[/PARA]/ [PARA]BW DCONGB W[/PARA]/ [PARA]BW DCONGCL Transmissio RBW[/PAR n resource A] in group [MML]AD D RSCGRP[/ MML] must be all zero when [PARA]Rx Bw[/PARA] is zero.
Not involved
Not involved
8/7/2013
11843267
162734118.xls.ms_office1
The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < forward congestion clear threshold, or forward handover reserved bandwidth = forward congestion threshold = forward congestion clear threshold = 0
PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) kbit/s 0 0 UNILNK(A None DD UNILNK) Fractional link(ADD FRALNK) IMA group(ADD IMAGRP) Not involved Not involved Not involved
8/7/2013
11853267
162734118.xls.ms_office1
If [PARA]BW ADJ[/PAR A] is set to be ON,[PARA ]BWDHOR SVBW[/PA RA],[PARA ]BWDCON GBW[/PAR A],[PARA] BWDCON GCLRBW[/ PARA] must obey the following rules: [PARA]BW DHORSVB W[/PARA] < [PARA]BW DCONGB W[/PARA] < [PARA]BW DCONGCL RBW[/PAR A] < [PARA]MI
kbit/s
LGC port
Not involved
Not involved
kbit/s
LGC port
None
Not involved
8/7/2013
11863267
162734118.xls.ms_office1
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type
kbit/s
AAL2 Path
None
Not involved
Not involved
8/7/2013
11873267
162734118.xls.ms_office1
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type
kbit/s
IP Path
[PARA]BW DHORSVB W[/PARA]/ [PARA]BW DCONGB W[/PARA]/ [PARA]BW DCONGCL RBW[/PAR A] in [MML]AD D IPPATH[/ MML] must be all zero when [PARA]Rx Bw[/PARA] is zero,or [PARA]BW DHORSVB W[/PARA] < [PARA]BW DCONGB W[/PARA] < [PARA]BW DCONGCL RBW[/PAR A] <
Not involved
Not involved
8/7/2013
11883267
162734118.xls.ms_office1
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type
kbit/s
[PARA]BW DHORSVB W[/PARA]/ [PARA]BW DCONGB W[/PARA]/ [PARA]BW DCONGCL Transmissio RBW[/PAR n resource A] in group [MML]AD D RSCGRP[/ MML] must be all zero when [PARA]Rx Bw[/PARA] is zero.
Not involved
Not involved
per cent
120
120
LGC port
When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set.
Not involved
Not involved
8/7/2013
11893267
162734118.xls.ms_office1
None
None
When [PARA]GR PT[/PARA] in Transmissio [MML]AD n resource D group RSCGRP[/ MML] is set to IP, this parameter is valid. When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set.
Not involved
Not involved
per cent
25
25
LGC port
Not involved
Not involved
None
ON
RNC
None
Not involved
Not involved
None
None
Not involved
Not involved
8/7/2013
11903267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
RNC
None
Not involved
Not involved
None
NONE
RNC
None
Not involved
Not involved
None
None
When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D AAL2PAT AAL2 Path H[/MML] is Y set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is valid.
The parameter modificatio Less than 5 AAL2 Path n has no minutes impact on the equipment.
None
NULL
NULL
IP Path
None
IP Path
The parameter modificatio Less than 5 n has no minutes impact on the equipment.
8/7/2013
11913267
162734118.xls.ms_office1
When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D IPOAPVC[/ MML] is set to FRAATM, the CARRYFR AATMLNK is required. When the value of [PARA]CA RRYT[/PA RA] is set to FRAATM, this parameter is valid. When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D
IPoA PVC(ADD IPOAPVC) SAAL(AD D SAALLNK) AAL2 Path(ADD AAL2PAT H) LGC port(ADD ATMLOGI CPORT)
None
None
Not involved
Not involved
8/7/2013
11923267
162734118.xls.ms_office1
When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D IPOAPVC[/ MML] is set to IMA, the CARRYIM AGRPN is required. When the value of [PARA]CA RRYT[/PA RA] is set to IMA, this parameter is valid. When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D AAL2PAT H[/MML] is set to IMA, this
IPoA PVC(ADD IPOAPVC) SAAL(AD D SAALLNK) AAL2 Path(ADD AAL2PAT H) LGC port(ADD ATMLOGI CPORT)
None
None
Not involved
Not involved
None
None
NodeB
None
Not involved
Not involved
Not involved
8/7/2013
11933267
162734118.xls.ms_office1
When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D IPOAPVC[/ MML] is set to NCORT, the CARRYNC OPTN is required. When the value of [PARA]CA RRYT[/PA RA] is set to NCOPT, this parameter is valid. When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D AAL2PAT H[/MML] is
None
None
Not involved
Not involved
None
None
LGC port
None
Not involved
8/7/2013
11943267
162734118.xls.ms_office1
When the value of [PARA]CA RRYT[/PA RA] is set to IMA, UNI, FRAATM, NCOPT, or ATMLGCP ORT, this parameter is SAAL(AD valid. D When the SAALLNK) value of AAL2 [PARA]CA Path(ADD RRYT[/PA AAL2PAT RA] in H) [MML]AD D AAL2PAT H[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is When the value of [PARA]CA RRYT[/PA RA] is set to IMA, SAAL UNI, FRAATM, NCOPT, or ATMLGCP ORT, this parameter is LGC port None
None
None
Not involved
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
None
None
LGC port
None
Not involved
8/7/2013
11953267
162734118.xls.ms_office1
When the value of [PARA]Rsc MngMode[/ PARA] in [MML]AD D NODEB[/M ML] of the resource correspondi ng NodeB is set to EXCLUSIV E, the AAL2PAT Y H must carry on ATMLGCP ORT or RSCGRP 1. When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D IPOAPVC[/ MML] is set to IMA, the bearing
AAL2 Path(ADD AAL2PAT H) None None SAAL(AD D SAALLNK) IPoA PVC(ADD IPOAPVC)
The parameter modificatio Less than 5 AAL2 Path n has no minutes impact on the equipment.
8/7/2013
11963267
162734118.xls.ms_office1
When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D IPOAPVC[/ MML] is set to UNI, the CARRYUN ILNKN is required. When the value of [PARA]CA RRYT[/PA RA] is set to UNI, this parameter is valid. When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D AAL2PAT H[/MML] is set to UNI, this When the value of [PARA]CA RRYT[/PA RA] is set to IMA, UNI, FRAATM, NCOPT, or ATMLGCP ORT, this parameter is
IPoA PVC(ADD IPOAPVC) SAAL(AD D SAALLNK) AAL2 Path(ADD AAL2PAT H) LGC port(ADD ATMLOGI CPORT)
None
None
Not involved
Not involved
None
None
The services are interrupted until the SAAL link is working normally.
The configuratio n data must be consistent with that of the peer end.
8/7/2013
11973267
162734118.xls.ms_office1
When the value of [PARA]CA RRYT[/PA RA] is set to IMA, UNI, FRAATM, NCOPT, or ATMLGCP ORT, this parameter is When the value of [PARA]CA RRYT[/PA RA] is set to ATMLGCP ORT, this parameter is valid. When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D AAL2PAT H[/MML] is set to ATM logic port, this parameter is
None
None
The services are interrupted until the SAAL link is working normally.
The configuratio n data must be consistent with that of the peer end.
None
None
Not involved
Not involved
None
None
Subsystem
None
Not involved
Not involved
None
None
Subsystem
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
8/7/2013
11983267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified. 1. Cell ID is in one-toone corresponde nce with Service Area Identity (SAI). 2. SAI = PLMN + LAC + SAC. PLMN-Id (Public Land Mobile Network Identity) is configured through the command [MML]AD D CNOPERA TOR[/MML ] and LAC (Location Area Code) is configured through the
byte
4500
4500
LGC port
None
Not involved
Not involved
None
None
Cell
None
Not involved
Not involved
Not involved
None
None
Cell
Before configuring this parameter, you need to configure the information about the common traffic logical channel by running [MML]AD D CTCH[/M ML]. At the same time, you need to set the CBS scheduling parameter of the cell by running [MML]AD D CELLCBS DRX[/MM L].
Not involved
Not involved
8/7/2013
11993267
162734118.xls.ms_office1
After running the [MML]AD D CBSADDR [/MML] command to add the CBS server address, you should not set this parameter to ON; After setting this parameter to ON, you should not run the [MML]AD D CBSADDR [/MML] command to add the CBS server address. The RNC built-in CBS function is available
None
OFF
RNC
None
N (For the UE in idle mode, if this parameter is changed to ON, and the CBS service is configured correctly,the Not CBS involved messages will be received by UE.Otherwi se, the CBS messages will not be received by UE.)
Not involved
kbit/s
32
32
Cell
This parameter must satisfy the following relationship: [PARA]CC CHMBR[/P ARA] >= [PARA]CC CHGBR[/P ARA].
Not involved
Not involved
8/7/2013
12003267
162734118.xls.ms_office1
kbit/s
512
512
Cell
This parameter must satisfy the following relationship: [PARA]CC CHMBR[/P ARA] >= [PARA]CC CHGBR[/P ARA].
Not involved
Not involved
None
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC EF. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is EF.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modificatio n for the existing user
8/7/2013
12013267
162734118.xls.ms_office1
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
None
100
100
RNC
None
Not involved
Not involved
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is EF; RNC transimssio n type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modificatio n for the existing user
None
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
12023267
162734118.xls.ms_office1
ms
1000
1000
Ethernet port
None
Not involved
Not involved
Not involved
None
AUTO
AUTO
PVC
When the value of [PARA]VC LTYPE[/PA RA] in [MML]AC Not T involved VCLCC[/M ML] is set to CC, the activation mode should be
Not involved
Not involved
ms
1000
SAAL
None
Not involved
Not involved
Modifying this parameter does not affect the existing SAAL link but may affect the next setup of the SAAL link. This parameter cannot be modified. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
ns
1024
1024
SAALLNK/ AAL2PAT H/IPOAPV C/VPCLCX None using this ATM traffic record index
Not involved
Not involved
Not involved
None
15
RNC
None
Not involved
Not involved
None
Cell
Not involved
Not involved
8/7/2013
12033267
162734118.xls.ms_office1
None
Cell
Not involved
Not involved
None
None
Cell
None
Not involved
Not involved
8/7/2013
12043267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
None
Cell
Not involved
Not involved
None
Cell
Not involved
Not involved
8/7/2013
12053267
162734118.xls.ms_office1
degree
None
Cell
Not involved
Not involved
second
None
Cell
Not involved
Not involved
8/7/2013
12063267
162734118.xls.ms_office1
degree
None
Cell
Not involved
Not involved
second
None
Cell
Not involved
Not involved
None
None
Cell
None
Not involved
Not involved
8/7/2013
12073267
162734118.xls.ms_office1
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
TU
TU
Cell
None
Not involved
Not involved
None
Cell
Not involved
Not involved
None
Cell
Not involved
Not involved
None
15
RNC
None
Not involved
Not involved
None
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
8/7/2013
12083267
162734118.xls.ms_office1
Cell(ADD CELLLDB, ADD RESERVE OVSF,ADD PRACHAC TOASCMA P,ADD CELLSELR ESEL,ADD CELLPUC, ADD CELLMEA S,ADD CELLOLC, ADD CELLLDR, ADD CELLLDM, ADD CELLHCS, ADD CELLCAC, ADD CELLALG OSWITCH, ADD CELLACC ESSSTRIC T,ADD CELLMBD RINTERFR
None
None
The value of this parameter is dependent on the value of Not [PARA]Cel involved lId[/PARA] in [MML]AD D SMLCCEL L[/MML].
Not involved
Not involved
10
RNC
None
Not involved
Not involved
None
OFF
RNC
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
ACTIVE
ACTIVE
Cell
Not involved
Not involved
8/7/2013
12093267
162734118.xls.ms_office1
None
None
Not involved
Not involved
None
SF8
SF8
Cell
The value of this parameter must not be larger than [PARA]Dl HoCeCode ResvSf[/PA RA] in [MML]AD D CELLCAC[ /MML].
Not involved
Not involved
None
None
Cell
None
Not involved
Not involved
8/7/2013
12103267
162734118.xls.ms_office1
None
None
Cell
None
Not involved
Not involved
per cent
90
90
Cell
The value of this parameter must satisfy the following relationship: [PARA]Cel lOverrunTh d[/PARA] >= [PARA]Cel lUnderrunT hd[/PARA].
Not involved
Not involved
8/7/2013
12113267
162734118.xls.ms_office1
None
RNC
None
Not involved
Not involved
180
RNC
None
Not involved
Not involved
None
None
Not involved
Not involved
8/7/2013
12123267
162734118.xls.ms_office1
None
None
Not involved
Not involved
None
AFFECT
AFFECT
Cell
None
Not involved
Not involved
8/7/2013
12133267
162734118.xls.ms_office1
None
AFFECT
AFFECT
Cell
None
Not involved
Not involved
None
45
RNC
None
Not involved
Not involved
8/7/2013
12143267
162734118.xls.ms_office1
per cent
30
30
Cell
The value of this parameter must satisfy the following relationship: [PARA]Cel lOverrunTh d[/PARA] >= [PARA]Cel lUnderrunT hd[/PARA].
Not involved
Not involved
None
None
Cell
None
Cell
8/7/2013
12153267
162734118.xls.ms_office1
CFG_DL_B LIND_DET ECTION_S WITCH:ON , CFG_HSDP A_64QAM _SWITCH: ON, CFG_HSDP A_MIMO_ SWITCH:O N, CFG_HSPA _DTX_DR X_SWITC RNC H:OFF, CFG_HSPA _HSSCCH_ LESS_OP_ SWITCH:O FF, CFG_IMS_ SUPPORT_ SWITCH:O N, CFG_LOSS LESS_DLR LC_PDUSI ZECHG_S WITCH:OF F,
None
None
Not involved
Not involved
8/7/2013
12163267
162734118.xls.ms_office1
RNC
None
Not involved
Not involved
RNC
None
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
8/7/2013
12173267
162734118.xls.ms_office1
When the network is in poor running status, the number of detection times cannot be set to a small value. If the value is too small, the path status may be affected.
None
IP Path
When the value of [PARA]PA THCHK[/P ARA] in [MML]AD D IPPATH[/ MML] is set to ENABLED, this parameter is valid.
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
None
NO
NO
SCTP
None
The checksum calculation The should be services are negotiated interrupted with the until the peer end, as SCTP link described in is working RFC4960. normally. The CRC32 is recommend ed.
8/7/2013
12183267
162734118.xls.ms_office1
The checksum calculation should be negotiated with the peer end, as described in RFC4960. The CRC32 is recommend ed. The checksum calculation should be negotiated with the peer end, as described in RFC4960. The CRC32 is recommend ed. This parameter cannot be modified.
None
NO
NO
SCTP
None
The services are interrupted until the SCTP link is working normally.
None
CRC32
CRC32
SCTP
None
The services are interrupted until the SCTP link is working normally.
None
None
Ethernet port
None
Not involved
Not involved
Not involved
None
TEN_MSE RNC C
None
Not involved
Not involved
8/7/2013
12193267
162734118.xls.ms_office1
None
TEN_MSE RNC C
None
Not involved
Not involved
None
TEN_MSE RNC C
None
Not involved
Not involved
8/7/2013
12203267
162734118.xls.ms_office1
None
TEN_MSE RNC C
None
Not involved
Not involved
None
TEN_MSE RNC C
None
Not involved
Not involved
8/7/2013
12213267
162734118.xls.ms_office1
None
TEN_MSE RNC C
None
Not involved
Not involved
None
TEN_MSE RNC C
None
Not involved
Not involved
8/7/2013
12223267
162734118.xls.ms_office1
None
TEN_MSE Cell(ADD C(ADD CELLQUA CELLQUA LITYMEA TEN_MSE LITYMEA S) None C S) RNC(SET -(SET QUALITY QUALITY MEAS) MEAS) TEN_MSE Cell(ADD C(ADD CELLQUA CELLQUA LITYMEA TEN_MSE LITYMEA S) None C S) RNC(SET -(SET QUALITY QUALITY MEAS) MEAS) TEN_MSE Cell(ADD C(ADD CELLQUA CELLQUA LITYMEA TEN_MSE LITYMEA S) None C S) RNC(SET -(SET QUALITY QUALITY MEAS) MEAS) TEN_MSE Cell(ADD C(ADD CELLQUA CELLQUA LITYMEA TEN_MSE LITYMEA S) None C S) RNC(SET -(SET QUALITY QUALITY MEAS) MEAS)
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
8/7/2013
12233267
162734118.xls.ms_office1
None
None
Cell
None
Not involved
Not involved
dB
Cell
8/7/2013
12243267
162734118.xls.ms_office1
dB
Cell
None
Not involved
Not involved
dB
Cell
None
Not involved
Not involved
8/7/2013
12253267
162734118.xls.ms_office1
dB
Cell
None
N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to choose this neighbourin Not g cell in cell involved reselection process. On the other hand. the smaller the value is, the higher the possibility for the UE to choose this neighbourin g cell.)
Not involved
kbit/s
None
LGC port
When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to OFF, this parameter should be set.
Not involved
Not involved
None
None
RNC
None
RNC
If the clock board type is changed from GCGa to GCUa, Less than the clock 10 minutes board should not be configured with GPS.
8/7/2013
12263267
162734118.xls.ms_office1
The services are interrupted until the cell is activated again.
None
False
False
Cell
None
Cell
None
UL_DL_B OTH
UL_DL_B OTH
NodeB
None.
Not involved
Not involved
8/7/2013
12273267
162734118.xls.ms_office1
None
Not involved
Not involved
8/7/2013
12283267
162734118.xls.ms_office1
None
CMCF_DL _HLS_SWI TCH:OFF, CMCF_UL _HLS_SWI TCH:OFF, CMCF_UL _PRECFG_ RNC TOLERAN CE_SWITC H:OFF, CMCF_WI THOUT_U E_CAP_RE PORT_SWI TCH:OFF
None
Not involved
Not involved
ms
5000
RNC
None
Not involved
Not involved
8/7/2013
12293267
162734118.xls.ms_office1
CMP_IU_I MS_PROC _AS_NOR MAL_PS_S WITCH:OF F, CMP_IU_S YSHOIN_C MP_IUUP_ FIXTO1_S WITCH:OF F, CMP_IUR_ H2D_FOR_ LOWR5_N RNCCELL RNC _SWITCH: OFF, CMP_IUR_ SHO_DIVC TRL_SWIT CH:OFF, CMP_UU_ AMR_SID_ MUST_CF G_SWITC H:OFF, CMP_UU_ DST_SERV _CELL_D2 E_SWITCH :OFF,
None
None
Not involved
Not involved
None
None
RNC(RST IU,RST IURESOUR CE,ADD CNNODE, ADD CNDOMAI N) RAB(ADD TYPRABB ASIC,ADD CELLRLP WR)
This parameter cannot be set to CS_DOMA IN when the [PARA]Tra Not fficClass[/P involved ARA] parameter is set to INTERACT IVE or BACKGRO UND.
Not involved
Not involved
8/7/2013
12303267
162734118.xls.ms_office1
The CN indexes of the same PLMN even the different CN domain cannot be the same. When the IuFlex function is used, each CN domain (CS/PS) can be configured with up to 32 CN nodes. The parameter modificatio n has no impact on the equipment.
None
None
RNC
None
Not involved
Not involved
Not involved
None
Normal
RNC
None
Not involved
Not involved
None
None
Adjacent Node
None
Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
8/7/2013
12313267
162734118.xls.ms_office1
None
None
RNC
None This parameter is valid only when [PARA]Cn OpGrpInde x[/PARA] in [MML]AD D CNOPERG ROUP[/M ML] is added. This paramter is valid only when [PARA]Cn OpGrpInde x[/PARA] in [MML]AD D
Not involved
Not involved
Not involved
None
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.
8/7/2013
12323267
162734118.xls.ms_office1
RNC(ADD CELLDSA CMANUA LPARA,AD D SAMBMSP ARA,ADD CBSADDR, ADD URA,ADD NODEB,A DD SAC,ADD RAC,ADD LAC,ADD CELLMBM SSA,ADD MBMSSA, SET OPERATO RCFGPAR A,ADD RNCCBCP UID,ADD IMSIIDNN SCNIDMA P,ADD NRIGLBC NIDMAP,A DD CNNODE,S ET RNC When [PARA]RS CMNGMO DE[/PARA] in [MML]AD D RSCGRP[/ MML] is set to EXCLUSIV E, this parameter is valid. When the value of Not [PARA]CN involved MNGMOD E[/PARA] in [MML]AD D ADJMAP[/ MML] is set to EXCLUSIV E, the operator index should be set. When the None Not involved
None
None
Not involved
Not involved
None
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
255
255
RNC
None
Not involved
Not involved
Not involved
This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.
8/7/2013
12333267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
This parameter cannot be modified. When the Iu-Flex function is used, the protocol version of each CN node must be R5 or later.The parameter modificatio n has no impact on the equipment.
None
None
RNC
None
Not involved
Not involved
None
ON
ON
Cell
None
Not involved
Not involved
8/7/2013
12343267
162734118.xls.ms_office1
None
Cell
This paramter is valid only when [PARA]Cod eAdjForHsd paSwitch[/P ARA] is set to ON.
Not involved
Not involved
per cent
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the parameter RNC(SET set through DRD) the Cell(ADD [MML]AD CELLDRD) D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command; This parameter is valid only
Not involved
Not involved
8/7/2013
12353267
162734118.xls.ms_office1
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the parameter RNC(SET set through DRD) the Cell(ADD [MML]AD CELLDRD) D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command; This parameter is valid only
None
Not involved
Not involved
8/7/2013
12363267
162734118.xls.ms_office1
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the RNC(SET parameter DRD) set through Cell(ADD the CELLDRD) [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command.
None
Not involved
Not involved
8/7/2013
12373267
162734118.xls.ms_office1
None
FALSE
FALSE
Cell
This paramter is valid only when INTER_FR EQ_HHO_ SWITCH of the [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML] is set to ON.
Not involved
Not involved
8/7/2013
12383267
162734118.xls.ms_office1
None
ENGLISH
RNC
None
N (For the UE in idle mode, if this parameter is changed, you need to set the Not correspondi involved ng code scheme so that you can correctly receive the CBS messages.)
Not involved
8/7/2013
12393267
162734118.xls.ms_office1
None
Not involved
Not involved
per cent
70
RNC
None
Not involved
Not involved
8/7/2013
12403267
162734118.xls.ms_office1
dB
This parameter is available if Cell(ADD the value of CELLDCC [PARA]BE C) QosPerform RNC(SET [/PARA] in DCCC) [MML]SET QOSACT[/ MML] is YES. When [PARA]MO CNSupport[ /PARA] in [MML]SET OPERATO RSHARIN GMODE[/ MML] is set to YES, CommPlmn UsingType needs to be set.Otherwis e,it does not need. When the value of [PARA]SA ALLNKT[/ PARA] is set to NNI, this parameter is When the value of [PARA]SA ALLNKT[/ PARA] is set to NNI, this parameter is When the value of [PARA]SA ALLNKT[/ PARA] is set to NNI, this parameter is
Not involved
Not involved
None
Not involved
Not involved
SAAL
Not involved
Not involved
30
30
SAAL
Not involved
Not involved
ms
10
10
SAAL
Not involved
Not involved
8/7/2013
12413267
162734118.xls.ms_office1
The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold. The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold.
ms
15
IP:15; ATM:20
RNC
Not involved
Not involved
ms
15
IP:15; ATM:20
RNC
Not involved
Not involved
8/7/2013
12423267
162734118.xls.ms_office1
The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold. The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold.
ms
15
IP:15; ATM:20
RNC
Not involved
Not involved
ms
15
IP:15; ATM:25
RNC
Not involved
Not involved
8/7/2013
12433267
162734118.xls.ms_office1
1.When the value of [PARA]PO RTPROTY PE[/PARA] in [MML]AD D PORTFLO WCTRLPA RA[/MML] is set to IP, this parameter should be set. 2.The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion
ms
25
25
RNC
Not involved
Not involved
8/7/2013
12443267
162734118.xls.ms_office1
1.When the value of [PARA]PO RTPROTY PE[/PARA] in [MML]AD D PORTFLO WCTRLPA RA[/MML] is set to IP, this parameter should be set. 2.The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold.
ms
25
25
RNC
Not involved
Not involved
ms
25
IP:25; ATM:30
RNC
Not involved
Not involved
8/7/2013
12453267
162734118.xls.ms_office1
The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold. The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold.
ms
25
IP:25; ATM:30
RNC
Not involved
Not involved
ms
25
IP:25; ATM:30
RNC
Not involved
Not involved
8/7/2013
12463267
162734118.xls.ms_office1
The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold. 1.When the value of [PARA]PO RTPROTY PE[/PARA] in [MML]AD D PORTFLO WCTRLPA RA[/MML] is set to IP, this parameter should be set. 2.The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion
ms
25
IP:25; ATM:50
RNC
Not involved
Not involved
ms
50
50
RNC
Not involved
Not involved
8/7/2013
12473267
162734118.xls.ms_office1
1.When the value of [PARA]PO RTPROTY PE[/PARA] in [MML]AD D PORTFLO WCTRLPA RA[/MML] is set to IP, this parameter can be set. 2.The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r
ms
50
50
RNC
Not involved
Not involved
None
None
Cell
None
Not involved
Not involved
8/7/2013
12483267
162734118.xls.ms_office1
None
None.
Not involved
Not involved
None
This parameter is valid only when [PARA]Con nCellBarred [/PARA] is set to BARRED.
Not involved
Not involved
8/7/2013
12493267
162734118.xls.ms_office1
None
NO
NO
RNC
None
Not involved
Not involved
Not involved
dB
Cell
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
12503267
162734118.xls.ms_office1
dB
Cell
This parameter is valid only when [PARA]Qu alMeas[/PA RA] is set to CPICH_EC NO.
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
12513267
162734118.xls.ms_office1
dB
Cell
Not involved
Not involved
8/7/2013
12523267
162734118.xls.ms_office1
dB
Cell
Not involved
Not involved
8/7/2013
12533267
162734118.xls.ms_office1
dB
127
127
Cell
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
12543267
162734118.xls.ms_office1
dB
127
127
Cell
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
12553267
162734118.xls.ms_office1
D1280
D1280
Cell
This parameter is valid only when [PARA]Con nCellBarred [/PARA] is set to BARRED.
Not involved
Not involved
8/7/2013
12563267
162734118.xls.ms_office1
dB
-20
-20
Physical channel
None
Not involved
8/7/2013
12573267
162734118.xls.ms_office1
None
None
UE
CONTEXT TYPE needs to be set when [PARA]RS TTYPE[/P ARA] in [MML]RST IUR[/MML ] is set to SINGLE_R Not involved NC; CONTEXT TYPE does not need to be set when [PARA]RS TTYPE[/P ARA] in [MML]RST IUR[/MML ] is set to ALL_RNC.
Not involved
Not involved
None
NO
NO
Ethernet port
None
Not involved
Not involved
Not involved
kbit/s
D16
RNC
None
Not involved
Not involved
kbit/s
D16
RNC
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
8/7/2013
12583267
162734118.xls.ms_office1
kbit/s
32
32
Cell
This parameter must satisfy the following relationship: [PARA]CO NVMBR[/P ARA] >= [PARA]CO NVGBR[/P ARA].
Not involved
Not involved
kbit/s
512
512
Cell
This parameter must satisfy the following relationship: [PARA]CO NVMBR[/P ARA] >= [PARA]CO NVGBR[/P ARA].
Not involved
Not involved
8/7/2013
12593267
162734118.xls.ms_office1
The following relationship must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= [PARA]Cop perMaxMod e[/PARA]. The following relationship must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= [PARA]Cop perMaxMod e[/PARA].
kbit/s
WBAMR_ BITRATE_ Cell(ADD 23.85K(AD WBAMR_ CELLAMR D BITRATE_ CWB) CELLAMR 23.85K RNC(SET CWB) AMRCWB) -(SET AMRCWB)
Not involved
Not involved
8/7/2013
12603267
162734118.xls.ms_office1
The following relationship must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= NBAMR_B [PARA]Cop Cell(ADD ITRATE_1 perMaxMod NBAMR_B CELLAMR 2.20K(ADD e[/PARA]. ITRATE_1 C) CELLAMR The 2.20K RNC(SET C) following AMRC) -(SET relationship AMRC) must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= [PARA]Cop perMaxMod e[/PARA]. 5 5 Ethernet port None
kbit/s
Not involved
Not involved
None
Not involved
Not involved
Not involved
8/7/2013
12613267
162734118.xls.ms_office1
None
None
RNC
CountCThre shold needs to be set when [PARA]Cou nterCheckS witch[/PAR A] in [MML]SET CNTCHK[/ MML] is set to ON; CountCThre shold does not need to be set when [PARA]Cou nterCheckS witch[/PAR A] in [MML]SET CNTCHK[/ MML] is set to OFF.
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
This paramter is valid only when [PARA]Tx DiversityInd [/PARA] is set to TRUE. Y This parameter is valid only when [PARA]Tx DiversityInd [/PARA] is set to TRUE.
Cell
8/7/2013
12623267
162734118.xls.ms_office1
None
None
RNC
Not involved
Not involved
ms
None
RNC
Not involved
Not involved
None
Cell
This parameter is required when the [PARA]Use OfHcs[/PA RA] parameter is set to USED but not required when the [PARA]Use OfHcs[/PA RA] parameter is set to NOT_USE D.
Not involved
Not involved
8/7/2013
12633267
162734118.xls.ms_office1
This parameter is based on actual networking. Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
None
Not involved
Not involved
per cent
100
100
RNC
None
Not involved
Not involved
8/7/2013
12643267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is AF43. RNC When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF43. When the interface type is Iu-
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUCS, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modificatio n for the existing user
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
12653267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF43; transimssio RNC n type is Hybird IP, the parameter is LQAF43. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL. When the interface
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
12663267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user The parameter modificatio n has no impact on the equipment.
per cent
100
100
RNC
None
Not involved
Not involved
Erl
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
12673267
162734118.xls.ms_office1
per cent
This parameter is valid when [PARA]Nco vHoOn2Gld Ind[/PARA] in [MML]SET INTERRAT HONCOV[/ MML] is set to ON. This parameter is valid when [PARA]Nco vHoOn2Gld Ind[/PARA] is set to ON.
Not involved
Not involved
8/7/2013
12683267
162734118.xls.ms_office1
The settings of CsInfoUpdF lag is valid only when the value of [PARA]Cs NriCfgMod e[/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to SUPP_IUF LEX or SUPP_IUF LEX_MOC N.The parameter modificatio n has no impact on the equipment. The settings of CsInfoUpd Tmr is valid only when the value of [PARA]CsI nfoUpdFlag [/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to ON.The parameter modificatio n has no impact on the equipment.
None
OFF
RNC
None
Not involved
Not involved
900
RNC
CsInfoUpd Tmr needs to be set when [PARA]CsI nfoUpdFlag [/PARA] in [MML]SET IUFLEX[/ MML] is set to ON; CsInfoUpd Tmr does not need to be set when [PARA]CsI nfoUpdFlag [/PARA] in [MML]SET IUFLEX[/ MML] is set to OFF.
Not involved
Not involved
8/7/2013
12693267
162734118.xls.ms_office1
When [PARA]CN ProtclVer[/ PARA] in [MML]AD D CNNODE[/ MML] is set to R5 or any later version, CsNriCfgM ode may be set to SUPP_IUF LEX.The parameter modificatio n has no impact on the equipment. When [PARA]CN ProtclVer[/ PARA] in [MML]AD D CNNODE[/ MML] is set to R6 or any later
None
SUPP_NO NE
RNC
None
Not involved
Not involved
8/7/2013
12703267
162734118.xls.ms_office1
The settings of CSNRILeng th is valid only when the value of [PARA]Cs NriCfgMod e[/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to SUPP_IUF LEX, SUPP_MO CN or SUPP_IUF LEX_MOC N.The parameter modificatio n has no impact on the equipment.
None
None
RNC
CSNRILeng th needs to be set when [PARA]CsI uFlexFlag[/ PARA] in [MML]SET IUFLEX[/ MML] is set to ON; CSNRILeng th does not need to be set when [PARA]CsI uFlexFlag[/ PARA] in [MML]SET IUFLEX[/ MML] is set to OFF.
Not involved
Not involved
None
When [PARA]Dsa cAutoSwitc h[/PARA] is set to ON,the parameter need configure;el se,need not configure.
Not involved
Not involved
8/7/2013
12713267
162734118.xls.ms_office1
None
OFF
OFF
Cell
None
Not involved
Not involved
8/7/2013
12723267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
100
100
RNC
None
Not involved
Not involved
8/7/2013
12733267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is AF43. RNC When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF43. When the interface type is Iu-
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUCS, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
12743267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF43; transimssio RNC n type is Hybird IP, the parameter is LQAF43. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL. When the interface
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
12753267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
100
100
RNC
None
Not involved
Not involved
8/7/2013
12763267
162734118.xls.ms_office1
None
CS_AMRC _SWITCH: OFF, CS_HAND OVER_TO _UTRAN_ DEFAULT _CFG_SWI TCH:ON, CS_IUUP_ RNC V2_SUPPO RT_SWITC H:OFF, CS_ZERO_ C_AMR_C FG_TWO_ CODCH_S WITCH:OF F
None
Not involved
Not involved
None
DCH
RNC
None
Not involved
Not involved
8/7/2013
12773267
162734118.xls.ms_office1
ms
RNC
None
Not involved
Not involved
ms
RNC
None
Not involved
Not involved
None
None
Not involved
Not involved
None
OFF
OFF
RNC
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
8/7/2013
12783267
162734118.xls.ms_office1
None
None
Physical channel
None
Not involved
Not involved
Not involved
bit
None
Not involved
Not involved
Not involved
per cent
RNC
None
Not involved
Not involved
8/7/2013
12793267
162734118.xls.ms_office1
per cent
50
RNC
None
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
None
ON
RNC
None
Not involved
Not involved
Not involved
None
None
RNC
Not involved
Not involved
Not involved
None
None
RNC
Not involved
Not involved
This parameter cannot be modified. The parameter modificatio n has no impact on the equipment. This parameter cannot be modified. The parameter modificatio n has no impact on the equipment.
8/7/2013
12803267
162734118.xls.ms_office1
byte
D64
RNC
The following relationship must be satisfied: [PARA]D2 F2PTvmTh d[/PARA] < [PARA]F2 DTvmThd[/ PARA]; [PARA]D2 F2PTvmTh d[/PARA] < [PARA]Be EFach2DTv mThd[/PAR A].
Not involved
Not involved
ms
D1000
RNC
None
Not involved
Not involved
ms
D5000
RNC
None
Not involved
Not involved
8/7/2013
12813267
162734118.xls.ms_office1
30
RNC
None
Not involved
Not involved
None
30
RNC
None
Not involved
Not involved
8/7/2013
12823267
162734118.xls.ms_office1
None
None
Not involved
Not involved
30
RNC
None
Not involved
Not involved
ms
100
RNC
None
Not involved
Not involved
8/7/2013
12833267
162734118.xls.ms_office1
None
16
16
RAB
None.
Not involved
Not involved
8/7/2013
12843267
162734118.xls.ms_office1
None
RAB
None.
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
255
RNC
When [PARA]MO CNSupport[ /PARA] in [MML]SET OPERATO RSHARIN GMODE[/ MML] is set to YES, DefaultCnO p optionally needs to be set.Otherwis e,it does not need.
Not involved
Not involved
8/7/2013
12853267
162734118.xls.ms_office1
dB
-22
RNC
None
Not involved
Not involved
dB
-13
-13
Cell
None
Not involved
Not involved
8/7/2013
12863267
162734118.xls.ms_office1
RNC
This paramter must be configured when [PARA]Re HostPolicy[/ PARA] is set to REHOSTD ELAY.
Not involved
Not involved
ms
On E1 working mode, the parameter [PARA]DE LAY[/PAR A] and [PARA]DL YGB[/PAR A] must obey the following rules: [PARA]DE LAY[/PAR 25(AEUa),2 A]*64*30/( IMA group 00(AOUa) 53*8) > [PARA]DL YGB[/PAR A] + 3*2; [PARA]DE LAY[/PAR A]*64*30/( 53*8) + 3*2 + [PARA]DL YGB[/PAR A] < 1024. On T1 working mode, they must obey
Not involved
Not involved
If the time delay is very large on the line, and the max differ delay is low, Several links can not be activated.
8/7/2013
12873267
162734118.xls.ms_office1
None
None
RAB
None.
Not involved
Not involved
per cent
RNC
This parameter is valid only when the [PARA]Cod eBalancing DrdSwitch[/ PARA] parameter is set to ON through the [MML]SET DRD[/MM L] command.
Not involved
Not involved
8/7/2013
12883267
162734118.xls.ms_office1
This parameter is required when the [PARA]Qrx levminExtS up[/PARA] parameter is set to TRUE but not required when the [PARA]Qrx levminExtS up[/PARA] parameter is set to FALSE. This parameter is valid only when [PARA]Qrx levminExtS up[/PARA] is set to TRUE.
None
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
None
None
The [PARA]DE M3UA(AD NO[/PARA D M3DE) ] field in Not RNC(ADD [MML]AD involved M3LKS,AD D D M3RT) M3DE[/M ML]
Not involved
Not involved
None
None
Ethernet port
None
Not involved
Not involved
Not involved
When running this command, ensure that the source IP address and the destination IP address cannot be the local IP address of the configured IP path and the detected peer IP address.
8/7/2013
12893267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified. The parameter modificatio n has no impact on the equipment. The parameter cannot be modified.
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
Ethernet port
None
Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
min
Cell
None
Not involved
Not involved
None
None
RAB
None.
Not involved
Not involved
8/7/2013
12903267
162734118.xls.ms_office1
None
MAY
RNC
None
Not involved
Not involved
None
50
RNC
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.
Not involved
Not involved
8/7/2013
12913267
162734118.xls.ms_office1
ms
Not involved
Not involved
None
10
RNC
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.
Not involved
Not involved
None
None
Not involved
Not involved
kbit/s
D128
RNC
None
Not involved
Not involved
8/7/2013
12923267
162734118.xls.ms_office1
kbit/s
If this parameter is set through both the [MML]SET FRCCHLT YPEPARA[ /MML] and [MML]AD D CELLFRC[/ MML] commands, the parameter set through the [MML]AD D CELLFRC[/ MML] command takes precedence over that set through the [MML]SET FRCCHLT YPEPARA[ /MML] command.
Not involved
Not involved
8/7/2013
12933267
162734118.xls.ms_office1
kbit/s
D64
RNC
This parameter can be used for selection of the initial rate for BE services only when the DCCC_SW ITCH under the [PARA]Chs witch[/PAR A] parameter is set to on through the [MML]SET CORRMAL GOSWITC H[/MML] command.
Not involved
Not involved
kbit/s
D64
RNC
None.
Not involved
Not involved
8/7/2013
12943267
162734118.xls.ms_office1
ms
Not involved
Not involved
ms
Not involved
Not involved
None
RNC
None
Not involved
Not involved
8/7/2013
12953267
162734118.xls.ms_office1
None
Cell
None
Not involved
Not involved
8/7/2013
12963267
162734118.xls.ms_office1
The value of this parameter must satisfy the following relationship: [PARA]Dl OlcTrigThd [/PARA](Se e [MML]AD D CELLLDM [/MML]) >= [PARA]Dl CellTotalTh d[/PARA]; [PARA]Dl CellTotalTh d[/PARA] >= [PARA]Dl
None
90
90
Cell
Not involved
Not involved
None
SF/2
SF/2
NodeB
None.
Not involved
Not involved
8/7/2013
12973267
162734118.xls.ms_office1
None
None
Cell
The value of this parameter must satisfy the following relationship: [PARA]DL OVSFSF[/P ARA]>=[P ARA]DLC ODENO[/P ARA]. .
Not involved
Not involved
None
80
80
Cell
The value of this parameter must satisfy the following relationship: [PARA]Dl HOThd[/PA RA] > [PARA]Dl ConvAMR Thd[/PARA ]; [PARA]Dl ConvAMR Thd[/PARA ]> [PARA]Dl OtherThd[/ PARA] .
Not involved
Not involved
8/7/2013
12983267
162734118.xls.ms_office1
None
80
80
Cell
The value of this parameter must satisfy the following relationship: [PARA]Dl HOThd[/PA RA] > [PARA]Dl ConvNonA MRThd[/P ARA]; [PARA]Dl ConvNonA MRThd[/P ARA] > [PARA]Dl OtherThd[/ PARA] .
Not involved
Not involved
Not involved
Not involved
8/7/2013
12993267
162734118.xls.ms_office1
Not involved
Not involved
kbit/s
D64
RNC
When the value of DlMidRate Calc is HAND_AP POINT,the following relationship must be satisfied: [PARA]Dl DcccRateTh d[/PARA] <= [PARA]Dl MidRateTh
Not involved
Not involved
8/7/2013
13003267
162734118.xls.ms_office1
kbit/s
This parameter is available if the value of [PARA]BE QosPerform [/PARA] in [MML]SET QOSACT[/ MML] is YES. Cell(ADD To CELLDCC configure C) this RNC(SET parameter, DCCC) you must take into consideratio n the actual fullcoverage rate of a certain cell. Otherwise, the QoS would be affected.
Not involved
Not involved
8/7/2013
13013267
162734118.xls.ms_office1
For the BE users with the same [PARA]Tra fficClass[/P ARA], [PARA]TH PClass[/PA RA] and [PARA]Bea rType[/PAR A] values, make sure: [PARA]Ul GBR[/PAR A] of GOLD users ([PARA]Us erPriority[/P ARA] is set to GOLD) >= [PARA]Ul GBR[/PAR A] of SILVER users ([PARA]Us erPriority[/P ARA] is set to SILVER)
kbit/s
D64
RNC
Not involved
Not involved
8/7/2013
13023267
162734118.xls.ms_office1
None
SF32
SF32
Cell
The value of this parameter must satisfy the following relationship: [PARA]Dl HoCeCode ResvSf[/PA RA] >= [PARA]DlL drCreditSfR esThd[/PA RA]; [PARA]Dl HoCeCode ResvSf[/PA RA] >= [PARA]Cel lLdrSfResT hd[/PARA] .
Not involved
Not involved
8/7/2013
13033267
162734118.xls.ms_office1
None
85
85
Cell
The value of this parameter must satisfy the following relationship: [PARA]Dl CellTotalTh d[/PARA] >= [PARA]Dl HOThd[/PA RA] ; [PARA]Dl HOThd[/PA RA] > [PARA]Dl ConvAMR Thd[/PARA ]; [PARA]Dl HOThd[/PA RA] > [PARA]Dl ConvNonA MRThd[/P ARA] .
Not involved
Not involved
None
Cell
None
Not involved
Not involved
8/7/2013
13043267
162734118.xls.ms_office1
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.
None
10
RNC
Not involved
Not involved
bit/s
200000
200000
Cell
None
Not involved
Not involved
8/7/2013
13053267
162734118.xls.ms_office1
per cent
20
20
Cell
None
Not involved
Not involved
8/7/2013
13063267
162734118.xls.ms_office1
None
Cell
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
8/7/2013
13073267
162734118.xls.ms_office1
Not involved
Not involved
8/7/2013
13083267
162734118.xls.ms_office1
The value of this parameter must not be larger than [PARA]Dl HoCeCode ResvSf[/PA RA] in [MML]AD D CELLCAC[ /MML].
Not involved
Not involved
8/7/2013
13093267
162734118.xls.ms_office1
None
no action
no action
Cell
None
Not involved
Not involved
8/7/2013
13103267
162734118.xls.ms_office1
Not involved
Not involved
8/7/2013
13113267
162734118.xls.ms_office1
None
Not involved
Not involved
8/7/2013
13123267
162734118.xls.ms_office1
Not involved
Not involved
8/7/2013
13133267
162734118.xls.ms_office1
None
no action
no action
Cell
None
Not involved
Not involved
8/7/2013
13143267
162734118.xls.ms_office1
Not involved
Not involved
8/7/2013
13153267
162734118.xls.ms_office1
per cent
60
60
Cell
The value of this parameter must satisfy the following relationship: [PARA]DlL drTrigThd[/ PARA] >= [PARA]DlL drRelThd[/P ARA]; [PARA]Dl OlcRelThd[ /PARA] >= [PARA]DlL drRelThd[/P ARA].
Not involved
Not involved
8/7/2013
13163267
162734118.xls.ms_office1
None
Not involved
Not involved
8/7/2013
13173267
162734118.xls.ms_office1
None
no action
no action
Cell
None
Not involved
Not involved
8/7/2013
13183267
162734118.xls.ms_office1
Not involved
Not involved
8/7/2013
13193267
162734118.xls.ms_office1
None
no action
no action
Cell
None
Not involved
Not involved
8/7/2013
13203267
162734118.xls.ms_office1
None
Not involved
Not involved
8/7/2013
13213267
162734118.xls.ms_office1
per cent
70
70
Cell
The value of this parameter must satisfy the following relationship: [PARA]DlL drTrigThd[/ PARA] >= [PARA]DlL drRelThd[/P ARA]; [PARA]Dl OlcTrigThd [/PARA] > [PARA]DlL drTrigThd[/ PARA]; [PARA]Dl OtherThd[/ PARA](See [MML]AD D CELLCAC[ /MML]) >= [PARA]DlL drTrigThd[/ PARA].
Not involved
Not involved
ms
1000
1000
Cell
None
Not involved
Not involved
None
D64
D64
NodeB
None.
Not involved
Not involved
8/7/2013
13223267
162734118.xls.ms_office1
None
Cell
None
Not involved
Not involved
None
Not involved
Not involved
None
This parameter is valid when the [PARA]Dl RateUpAdj Level[/PAR A] in [MML]SET DCCC[/M ML] is set to 3_Rates, or when [PARA]Dl RateDnAdj Level[/PAR A] in [MML]SET DCCC[/M ML] is set to 3_Rates.
Not involved
Not involved
8/7/2013
13233267
162734118.xls.ms_office1
This parameter is valid when the [PARA]Dl MidRateCal c[/PARA] in [MML]SET DCCC[/M ML] is set to HAND_AP POINT, and the following relationship must be satisfied: [PARA]Dl DcccRateTh d[/PARA] <= [PARA]Dl
kbit/s
D128
RNC
Not involved
Not involved
8/7/2013
13243267
162734118.xls.ms_office1
ms
3000
RNC
The following relationship must be satisfied: [PARA]Ul ModeChang eTimerLen[ /PARA] <= [PARA]Dl ModeChang eTimerLen[ /PARA].
Not involved
Not involved
None
100
RNC
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
RNC
None
Not involved
Not involved
8/7/2013
13253267
162734118.xls.ms_office1
None
Cell
None
Not involved
Not involved
8/7/2013
13263267
162734118.xls.ms_office1
None
Cell
None
Not involved
Not involved
None
D1
RNC
None
Not involved
Not involved
8/7/2013
13273267
162734118.xls.ms_office1
per cent
85
85
Cell
The value of this parameter must satisfy the following relationship: [PARA]Dl OlcTrigThd [/PARA] >= [PARA]Dl OlcRelThd[ /PARA]; [PARA]Dl OlcRelThd[ /PARA] >= [PARA]DlL drRelThd[/P ARA].
Not involved
Not involved
8/7/2013
13283267
162734118.xls.ms_office1
None
Cell
None
Not involved
Not involved
None
100
RNC
None
Not involved
Not involved
8/7/2013
13293267
162734118.xls.ms_office1
per cent
95
95
Cell
The value of this parameter must satisfy the following relationship: [PARA]Dl OlcTrigThd [/PARA] >= [PARA]Dl OlcRelThd[ /PARA]; [PARA]Dl OlcTrigThd [/PARA] > [PARA]DlL drTrigThd[/ PARA]; [PARA]Dl OlcTrigThd [/PARA] >= [PARA]Dl CellTotalTh d[/PARA].
Not involved
Not involved
8/7/2013
13303267
162734118.xls.ms_office1
None
75
75
Cell
The value of this parameter must satisfy the following relationship: [PARA]Dl ConvAMR Thd[/PARA ]> [PARA]Dl OtherThd[/ PARA]; [PARA]Dl ConvNonA MRThd[/P ARA] > [PARA]Dl OtherThd[/ PARA]; [PARA]Dl OtherThd[/ PARA] >= [PARA]DlL drTrigThd[/ PARA](See [MML]AD D CELLLDM [/MML]). The value of this parameter must satisfy the following relationship: [PARA]DL OVSFSF[/P ARA]>=[P ARA]DLC ODENO[/P ARA]. .
Not involved
Not involved
None
None
Cell
Not involved
Not involved
8/7/2013
13313267
162734118.xls.ms_office1
Not involved
Not involved
8/7/2013
13323267
162734118.xls.ms_office1
Not involved
Not involved
None
NO
RNC
Not involved
Not involved
None
NO
RNC
Not involved
Not involved
8/7/2013
13333267
162734118.xls.ms_office1
None
NO
RNC
Not involved
Not involved
None
Not involved
Not involved
8/7/2013
13343267
162734118.xls.ms_office1
None
NO
RNC
Not involved
Not involved
None
NO
RNC
Not involved
Not involved
None
NO
RNC
Not involved
Not involved
None
NO
RNC
Not involved
Not involved
8/7/2013
13353267
162734118.xls.ms_office1
None
OFF
RNC
None
Not involved
Not involved
None
3_Rates
RNC
None
Not involved
Not involved
None
3_Rates
RNC
None
Not involved
Not involved
8/7/2013
13363267
162734118.xls.ms_office1
dB
None
Not involved
Not involved
8/7/2013
13373267
162734118.xls.ms_office1
None
None
Cell
None
Not involved
Not involved
8/7/2013
13383267
162734118.xls.ms_office1
None
FALSE
RNC
None
Not involved
Not involved
8/7/2013
13393267
162734118.xls.ms_office1
None
Not involved
Not involved
None
10
RNC
None
100
RNC
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to NOPRIORI TY. This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.
Not involved
Not involved
Not involved
Not involved
8/7/2013
13403267
162734118.xls.ms_office1
kbit/s
D64
RNC
None.
Not involved
Not involved
dB
50
RNC
The following relationship must be satisfied: [PARA]DlT hdE1[/PAR A] <= [PARA]DlT hdE2[/PAR A] < [PARA]DlT hdF2[/PAR A] <= [PARA]DlT hdF1[/PAR A].
Not involved
Not involved
8/7/2013
13413267
162734118.xls.ms_office1
dB
50
RNC
The following relationship must be satisfied: [PARA]DlT hdE1[/PAR A] <= [PARA]DlT hdE2[/PAR A] < [PARA]DlT hdF2[/PAR A] <= [PARA]DlT hdF1[/PAR A].
Not involved
Not involved
8/7/2013
13423267
162734118.xls.ms_office1
dB
120
RNC
The following relationship must be satisfied: [PARA]DlT hdE1[/PAR A] <= [PARA]DlT hdE2[/PAR A] < [PARA]DlT hdF2[/PAR A] <= [PARA]DlT hdF1[/PAR A].
Not involved
Not involved
8/7/2013
13433267
162734118.xls.ms_office1
dB
120
RNC
The following relationship must be satisfied: [PARA]DlT hdE1[/PAR A] <= [PARA]DlT hdE2[/PAR A] < [PARA]DlT hdF2[/PAR A] <= [PARA]DlT hdF1[/PAR A].
Not involved
Not involved
8/7/2013
13443267
162734118.xls.ms_office1
None
80
80
Cell
None
Not involved
Not involved
ms
Not involved
Not involved
8/7/2013
13453267
162734118.xls.ms_office1
1.When the value of [PARA]BT[ /PARA] in [MML]AD D IMAGRP[/ MML] is selected, this parameter is valid. 2.On E1 working mode, the parameter IMA group [PARA]DE LAY[/PAR A] and [PARA]DL YGB[/PAR A] must obey the following rules: [PARA]DE LAY[/PAR A]*64*30/( 53*8) > [PARA]DL YGB[/PAR A] + 3*2;
cell/s
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
OPEN
OPEN
SRB
None
Not involved
Not involved
Not involved
None
8/7/2013
13463267
162734118.xls.ms_office1
None
None
RNC
When the value of [PARA]SP DF[/PARA] Y is set to WNF, this parameter is valid.
RNC
After this parameter is modified, Less than the RNC 10 minutes must be reset to take effect.
None
None
RNC
Not involved
Not involved
8/7/2013
13473267
162734118.xls.ms_office1
None
None
RNC
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
RNC
When the value of [PARA]SP DF[/PARA] Y is set to DNF, this parameter is valid. This paramter is valid only when [PARA]Tx Y DiversityInd [/PARA] is set to TRUE.
RNC
After this parameter is modified, Less than the RNC 10 minutes must be reset to take effect.
None
None
None
Cell
8/7/2013
13483267
162734118.xls.ms_office1
This paramter is valid only when [PARA]Tx DiversityInd [/PARA] is set to TRUE. Y This parameter is valid only when [PARA]Tx DiversityInd [/PARA] is set to TRUE.
None
None
None
Cell
None
SINGLE_T RNC PC
None
Not involved
Not involved
8/7/2013
13493267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
Ethernet port
None
Not involved
Not involved
Not involved
None
None
Ethernet port
None
Not involved
Not involved
Not involved
8/7/2013
13503267
162734118.xls.ms_office1
The [PARA]DP X[/PARA] field in [MML]AD D N7DPC[/M ML] The parameter [PARA]DP X[/PARA] in [MML]AD D N7DPC[/M ML] When the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to IUR, IUCS, or NNI_AAL2 SWITCH, or the value of When the value of [PARA]VC LTYPE[/PA RA] in [MML]AC T VCLCC[/M ML] is set to CC, the activation direction should be
None
None
RNC(ADD MTP3RT,A DD NRNC,AD D CNNODE, ADD MTP3LKS, ADD N7DPC) M3UA(AD D M3DE) Adjacent Node(ADD ADJNODE)
Not involved
Not involved
Not involved
None
BOTH
BOTH
PVC
Not involved
Not involved
Not involved
8/7/2013
13513267
162734118.xls.ms_office1
DRA_AQM _SWITCH: OFF, DRA_BE_E DCH_TTI_ RECFG_S WITCH:ON , DRA_BE_ RATE_DO WN_BF_H O_SWITC H:OFF, DRA_DCC C_SWITCH :ON, RNC DRA_HSD PA_DL_FL OW_CONT ROL_SWIT CH:OFF, DRA_HSD PA_STATE _TRANS_S WITCH:OF F, DRA_HSU PA_DCCC_ SWITCH:O N, DRA_HSU PA_STATE
None
DRA_BE_ RATE_DO WN_BF_H O_SWITC H,DRA_TH ROU_DCC C_SWITCH ,DRA_BE_ EDCH_TTI _RECFG_S WITCH and DRA_HSU PA_DCCC_ SWITCH are valid when DRA_DCC C_SWITCH is set to ON; For BE service,DR A_HSDPA_ STATE_TR ANS_SWIT CH and DRA_HSU PA_STATE _TRANS_S WITCH are valid when DRA_PS_B
Not involved
Not involved
dB
-18
-18
Cell
None
Not involved
Not involved
8/7/2013
13523267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
ms
5000
RNC
None
Not involved
Not involved
ms
5000
RNC
None
Not involved
Not involved
None
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the RNC(SET parameter DRD) set through Cell(ADD the CELLDRD) [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command.
Not involved
Not involved
None
NO
RNC
Not involved
Not involved
8/7/2013
13533267
162734118.xls.ms_office1
The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold. The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold.
ms
60
IP:60; ATM:45
RNC
Not involved
Not involved
ms
60
IP:60; ATM:45
RNC
Not involved
Not involved
8/7/2013
13543267
162734118.xls.ms_office1
The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold. The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r ecover threshold.
ms
60
IP:60; ATM:45
RNC
Not involved
Not involved
ms
60
IP:60; ATM:80
RNC
Not involved
Not involved
8/7/2013
13553267
162734118.xls.ms_office1
1.When the value of [PARA]PO RTPROTY PE[/PARA] in [MML]AD D PORTFLO WCTRLPA RA[/MML] is set to IP, this parameter can be set. 2.The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r
ms
80
80
RNC
Not involved
Not involved
8/7/2013
13563267
162734118.xls.ms_office1
1.When the value of [PARA]PO RTPROTY PE[/PARA] in [MML]AD D PORTFLO WCTRLPA RA[/MML] is set to IP, this parameter can be set. 2.The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>c ongestion threshold>r
ms
80
80
RNC
Not involved
Not involved
8/7/2013
13573267
162734118.xls.ms_office1
None
DR_RRC_ DRD_SWI TCH:ON,D R_RAB_SI NG_DRD_ RNC SWITCH:O N,DR_RAB _COMB_D RD_SWITC H:OFF
None
Not involved
Not involved
None
None
RNC
Not involved
Not involved
8/7/2013
13583267
162734118.xls.ms_office1
None
RNC
DRXCycle LenCoef needs to be set only when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to CS_DOMA IN or PS_DOMAI N.
N (For the UE in idle mode, Not affecting its involved period of listening to PCHs)
Not involved
None
RNC
None
Not involved
Not involved
8/7/2013
13593267
162734118.xls.ms_office1
None
None
RNC
Not involved
Not involved
None
None
RNC
Not involved
Not involved
None
None
None
Not involved
Not involved
Not involved
8/7/2013
13603267
162734118.xls.ms_office1
None
ON
RNC
None
Not involved
Not involved
None
Ethernet port(PING 0(PING IP) IP) None(SET RNC(SET PHBMAP,S DSCPMAP) ET None DSCPMAP) SCTP(ADD 62(ADD SCTPLNK) SCTPLNK) Board(SET PHBMAP) Ethernet port
Not involved
Not involved
Not involved
None
None
None
Not involved
Not involved
Not involved Interrupt the service until the parameter is correctly set.
None
None
RNC
None
RNC
None
None
E1/T1
None
Not involved
Not involved
8/7/2013
13613267
162734118.xls.ms_office1
None
None
The destination IP address must not be the broadcast address or the multicast address. The parameter must not be the same as Not any IP involved address that has been configured in the RNC. The parameter must not be the same as the internal/exte rnal IP address of the BAM. Not involved
Not involved
Not involved
None
None
IP Route
None
Not involved
Not involved
None
None
IP Route
None
Not involved
Not involved
Not involved
8/7/2013
13623267
162734118.xls.ms_office1
None
None
E1/T1
None
Not involved
Not involved
None
None
RNC
This parameter is valid when [PARA]Dtx valid[/PAR A] is set to ON. This parameter is valid when [PARA]Dtx valid[/PAR A] is set to ON.
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
None
RNC
Not involved
Not involved
8/7/2013
13633267
162734118.xls.ms_office1
frame
None
RNC
None
Not involved
Not involved
slot
None
RNC
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
8/7/2013
13643267
162734118.xls.ms_office1
When the value of [PARA]BR DTYPE[/P ARA] is set to FG2a, the value of [PARA]PT YPE[/PAR A] is set to FE, [PARA]AU TO[/PARA] in [MML]SET ETHPORT[ /MML] is set to DISABLE, the duplex is valid. This paramter is valid only when [PARA]Dy nCellShutD ownSwitch[ /PARA] is set to ON. This paramter is valid only when [PARA]Dy nCellShutD ownSwitch[ /PARA] is set to ON.
None
Full
Ethernet port
Port
This parameter If the mode must be is not consistent consistent, with the will peer interrupt equipment. service until The Full it is mode is consistent. recommend ed.
20
RNC
Not involved
Not involved
180
RNC
Not involved
Not involved
None
OFF
RNC
None
Not involved
Not involved
8/7/2013
13653267
162734118.xls.ms_office1
None
None
Cell
None
Not involved
Not involved
None
This paramter is valid only when [PARA]Dy nShutdown Switch[/PA RA] is set to ON_1 or ON_2 or ON_3.
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
ms
30
RNC
None
Not involved
Not involved
8/7/2013
13663267
162734118.xls.ms_office1
None
RNC
None
Not involved
Not involved
kbit/s
RNC
None
Not involved
Not involved
8/7/2013
13673267
162734118.xls.ms_office1
None
RNC
None
Not involved
Not involved
None
Cell
None
Not involved
Not involved
8/7/2013
13683267
162734118.xls.ms_office1
When the value of [PARA]PA THCHK[/P ARA] in [MML]AD D IPPATH[/ MML] is set to ENABLED, this parameter is valid.
None
None
IP Path
Not involved
Not involved
This address must be a peer address in normal status, and the peer equipment can respond to the PING request. The parameter modificatio n has no impact on the equipment.
dB
500
RNC
None
Not involved
Not involved
ms
100
RNC
None
Not involved
Not involved
8/7/2013
13693267
162734118.xls.ms_office1
If this parameter is set through both the [MML]SET FRC[/MML ] and [MML]AD D CELLFRC[/ MML] commands, the parameter RNC(SET set through FRC) the Cell(ADD [MML]AD CELLFRC) D CELLFRC[/ MML] command takes precedence over that set through the [MML]SET FRC[/MML ] command. If this parameter is set through both the
Not involved
Not involved
dB
3000
RNC
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
dB
5000
RNC
None
Not involved
Not involved
8/7/2013
13703267
162734118.xls.ms_office1
If this parameter is set through both the [MML]SET FRC[/MML ] and [MML]AD D CELLFRC[/ MML] commands, the parameter RNC(SET set through FRC) the Cell(ADD [MML]AD CELLFRC) D CELLFRC[/ MML] command takes precedence over that set through the [MML]SET FRC[/MML ] command. If this parameter is set through both the
dB
Not involved
Not involved
8/7/2013
13713267
162734118.xls.ms_office1
1.You can set the DST start date or end date by setting the StartType or EndType parameter to "DATEWE EK" type. In this case, you must set the Interrupt benchmark the service day to (n until the 6) or earlier, parameter is where n correctly represents set. the last day of the month. For example, in October, you must set the benchmark day to 25 (= 31 - 6) or earlier. If you set the date to "Tuesday in
None
None
RNC
When the value of [PARA]DS T[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of Y [PARA]EM [/PARA] in [MML]SET TZ[/MML] is set to DATE or DATEWEE K, the end date should be set.
RNC
bit
336
336
RAB
This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D1 to D12.
Not involved
Not involved
8/7/2013
13723267
162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D10 to D12. This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to D11 or D12.
bit
None
RAB
Not involved
Not involved
bit
None
RAB
Not involved
Not involved
8/7/2013
13733267
162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to D12. This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D2 to D12.
bit
None
RAB
Not involved
Not involved
bit
None
RAB
Not involved
Not involved
8/7/2013
13743267
162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D3 to D12. This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D4 to D12.
bit
None
RAB
Not involved
Not involved
bit
None
RAB
Not involved
Not involved
8/7/2013
13753267
162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D5 to D12. This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D6 to D12.
bit
None
RAB
Not involved
Not involved
bit
None
RAB
Not involved
Not involved
8/7/2013
13763267
162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D7 to D12. This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D8 to D12.
bit
None
RAB
Not involved
Not involved
bit
None
RAB
Not involved
Not involved
8/7/2013
13773267
162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter. It is required when the [PARA]Edc hMacdPduS izeNum[/P ARA] parameter is set to a value within the range of D9 to D12. This parameter is required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_ED CH_2MS or TRCH_ED CH_10MS but not required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_HS DSCH.
bit
None
RAB
Not involved
Not involved
None
D1
D1
RAB
Not involved
Not involved
8/7/2013
13783267
162734118.xls.ms_office1
None
16
16
RAB
None.
Not involved
Not involved
8/7/2013
13793267
162734118.xls.ms_office1
None
16
16
RAB
None.
Not involved
Not involved
8/7/2013
13803267
162734118.xls.ms_office1
RATE_8KB PS: not selected RATE_16K BPS: not selected RATE_32K BPS: not selected RATE_64K BPS: not selected RATE_128 KBPS: selected RATE_144 RNC KBPS: not selected RATE_256 KBPS: selected RATE_384 KBPS: not selected RATE_608 KBPS: selected RATE_144 0KBPS: not selected RATE_204 8KBPS: not
None
None
Not involved
Not involved
dB
None
RAB
This parameter is required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_ED CH_2MS or TRCH_ED CH_10MS.
Not involved
Not involved
8/7/2013
13813267
162734118.xls.ms_office1
This parameter is required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_ED CH_2MS or TRCH_ED CH_10MS. This parameter is must larger than [PARA]Edc hTargetLittl eRetransNu m[/PARA]. This parameter is required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_ED CH_2MS or TRCH_ED CH_10MS. This parameter is must less than [PARA]Edc hTargetLarg eRetransNu m[/PARA].
None
None
RAB
Not involved
Not involved
None
None
RAB
Not involved
Not involved
8/7/2013
13823267
162734118.xls.ms_office1
None
RAB
None.
Not involved
Not involved
8/7/2013
13833267
162734118.xls.ms_office1
None
RAB
None.
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
8/7/2013
13843267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
per cent
20
20
RNC
None
Not involved
Not involved
dB
10
10
Cell
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
8/7/2013
13853267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
8/7/2013
13863267
162734118.xls.ms_office1
None
FALSE
RNC
None
Not involved
Not involved
None
None
RNC
When the value of [PARA]DS T[/PARA] in [MML]SET Y TZ[/MML] is set to YES, the end type should be set.
RNC
8/7/2013
13873267
162734118.xls.ms_office1
None
ON
RNC
None
Not involved
Not involved
None
OFF
OFF
RNC
None
Not involved
Not involved
Not involved
None
OFF
RNC
None
Not involved
Not involved
8/7/2013
13883267
162734118.xls.ms_office1
When the value of [PARA]DS T[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of [PARA]EM Y [/PARA] in [MML]SET TZ[/MML] is set to DATE, WEEK, or DATEWEE K, the end month should be set. N (No impact on None the UE in idle mode) N (No impact on the UE in idle mode)
None
OCT
RNC
RNC
None
None
RNC
Not involved
Not involved
None
UEA0-1; UEA1-1
RNC
None
Not involved
Not involved
This parameter cannot be modified. The parameter modificatio n has no impact on the equipment.
min
None
Cell
min
None
Cell
This paramter is valid only when [PARA]Dy nShutdown Switch[/PA RA] is set to ON_1 or ON_2 or ON_3. This paramter is valid only when [PARA]Dy nShutdown Switch[/PA RA] is set to ON_2 or ON_3.
Not involved
Not involved
Not involved
Not involved
8/7/2013
13893267
162734118.xls.ms_office1
This paramter is valid only when [PARA]Dy nShutdown Switch[/PA RA] is set to ON_3.
min
None
Cell
Not involved
Not involved
None
None
RNC
Not involved
Not involved
None
Ethernet port
None
Not involved
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.
Ethernet port
None
Not involved
Not involved
Not involved
None
Ethernet port
None
Not involved
Not involved
Not involved
None
204800
204800
Ethernet port
None
Not involved
Not involved
Not involved
Ethernet port
None
Not involved
Not involved
Not involved
8/7/2013
13903267
162734118.xls.ms_office1
60
60
Ethernet port
None
Not involved
Not involved
Not involved
None
Cell
None
Not involved
Not involved
ms
5000
RNC
None
Not involved
Not involved
The modificatio n of the timer involves the peer end. For details, refer to ITUT Q2630.1/IT U-T Q2630.2.
8/7/2013
13913267
162734118.xls.ms_office1
The modificatio n of the timer involves the peer end. For details, refer to ITUT Q2630.1/IT U-T Q2630.2.
ms
7000
RNC
None
Not involved
Not involved
None
03&00&00 RNC
When the value of [PARA]DS T[/PARA] in [MML]SET Y TZ[/MML] is set to YES, the end time should be set.
RNC
byte
D1024
D1024
RAB
The value of this parameter must be larger than the value of the [PARA]Eve nt4bThd[/P ARA] parameter.
Not involved
Not involved
8/7/2013
13923267
162734118.xls.ms_office1
byte
None
RAB
The value of this parameter must be smaller than the value of the [PARA]Eve nt4aThd[/P ARA] parameter.
Not involved
Not involved
ms
50
50
RAB
per cent
160
160
RAB
This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA. This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA.
Not involved
Not involved
Not involved
Not involved
8/7/2013
13933267
162734118.xls.ms_office1
This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA.
per cent
80
80
RAB
Not involved
Not involved
None
SUN
RNC
When the value of [PARA]DS T[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of Y [PARA]EM [/PARA] in [MML]SET TZ[/MML] is set to WEEK or DATEWEE K, the end week should be set.
RNC
8/7/2013
13943267
162734118.xls.ms_office1
When the value of [PARA]DS T[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of Y [PARA]EM [/PARA] in [MML]SET TZ[/MML] is set to WEEK, the end week sequence should be set.
None
LAST
RNC
RNC
None
0.02
0.02
SRB
None
Not involved
Not involved
Not involved
None
None
0.004
0.004
SRB
None
Not involved
Not involved
Not involved
None
None
Current
Current
SRB
None
Not involved
Not involved
Not involved
None
None
100
100
SRB
None
Not involved
Not involved
Not involved
None
None
SRB
None
Not involved
Not involved
Not involved
None
8/7/2013
13953267
162734118.xls.ms_office1
None
0.02
0.02
SRB
None
Not involved
Not involved
Not involved
None
None
0.004
0.004
SRB
None
Not involved
Not involved
Not involved
None
None
Current
Current
SRB
None
Not involved
Not involved
Not involved
None
None
100
100
SRB
None
Not involved
Not involved
Not involved
None
None
SRB
None
Not involved
Not involved
Not involved
None
None
0.02
0.02
SRB
None
Not involved
Not involved
Not involved
None
None
0.004
0.004
SRB
None
Not involved
Not involved
Not involved
None
None
Current
Current
SRB
None
Not involved
Not involved
Not involved
None
8/7/2013
13963267
162734118.xls.ms_office1
None
100
100
SRB
None
Not involved
Not involved
Not involved
None
None
SRB
None
Not involved
Not involved
Not involved
None
None
0.02
0.02
SRB
None
Not involved
Not involved
Not involved
None
None
0.004
0.004
SRB
None
Not involved
Not involved
Not involved
None
None
Current
Current
SRB
None
Not involved
Not involved
Not involved
None
None
100
100
SRB
None
Not involved
Not involved
Not involved
None
None
SRB
None
Not involved
Not involved
Not involved
None
ms
D16000
RNC
None
Not involved
Not involved
8/7/2013
13973267
162734118.xls.ms_office1
ms
D5000
RNC
None
Not involved
Not involved
None
None
Transport channel
None
Not involved
Not involved
Not involved
None
None
Cell
This parameter is consistent with [PARA]Trc hId[/PARA] in [MML]AD D FACH[/M Not involved ML], [MML]AD D FACHDYN TFS[/MML ], and [MML]AD D FACHLOC H[/MML].
Not involved
Not involved
dB
Not involved
Not involved
Not involved
8/7/2013
13983267
162734118.xls.ms_office1
None
REQUIRE
REQUIRE
Cell
This parameter is required when the [PARA]Inte rFreqInterR atMeasInd[/ PARA] parameter is set to INTER_FR EQ, INTER_RA T or INTER_FR EQ_AND_I NTER_RA T but not required when the [PARA]Inte rFreqInterR atMeasInd[/ PARA] parameter is set to NOT_REQ UIRE.
Not involved
Not involved
dB
Cell
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
per cent
None
RNC
None.
Not involved
Not involved
8/7/2013
13993267
162734118.xls.ms_office1
per cent
None
RNC
None
Not involved
Not involved
Not involved
None
RNC
None
Not involved
Not involved
8/7/2013
14003267
162734118.xls.ms_office1
When the value of [PARA]BR DTYPE[/P ARA] is set to FG2a, the value of [PARA]PT YPE[/PAR A] is set to FE, [PARA]AU TO[/PARA] in [MML]SET ETHPORT[ /MML] is set to DISABLE, the Flow Control is valid. When the value of [PARA]FL OWCTRLS WITCH[/P ARA] in [MML]SET OPT[/MML ] is set to ON, the flow control parameter index should be set. When the value of [PARA]FL OWCTRLS WITCH[/P ARA] is set to ON in [MML]SET ETHPORT[ /MML], the FCINDEX should be set. 1.When the value of [PARA]FL OWCTRLS
None
Not involved
Not involved
None
1(ADD ATMLOGI CPORT,AD D UNILNK,A DD IMAGRP,A DD FRALNK) -(ADD PORTFLO WCTRLPA RA,SET ETHPORT, SET OPT) 0(ADD IPLOGICP ORT,ADD PPPLNK,A DD MPGRP)
1(ADD ATMLOGI CPORT,AD D UNILNK,S ET OPT,ADD IMAGRP,A DD FRALNK) None(ADD PORTFLO WCTRLPA RA,SET ETHPORT) 0(ADD IPLOGICP ORT,ADD PPPLNK,A DD MPGRP)
Fractional link(ADD FRALNK) IMA group(ADD IMAGRP) Correspondi ng optical port(SET OPT) Ethernet port(SET ETHPORT) MLPPP Group, PPP Link(ADD PPPLNK,A DD MPGRP) UNILNK(A DD UNILNK) LGC port(ADD IPLOGICP ORT,ADD ATMLOGI CPORT) RNC(ADD PORTFLO
Not involved
Not involved
8/7/2013
14013267
162734118.xls.ms_office1
PPP Link(ADD PPPLNK) MLPPP Link, PPP Link(ADD MPLNK)
None
16bit
16bit
None
PPP link
dB
None
Not involved
Not involved
None
None
None
None
None
None
This paramter is valid only when [PARA]Tx Y DiversityInd [/PARA] is set to TRUE. This paramter is valid only when [PARA]Tx Y DiversityInd [/PARA] is set to TRUE.
Cell
Cell
dB
-30
RNC
None
Not involved
Not involved
8/7/2013
14023267
162734118.xls.ms_office1
dB
-200
RNC
None
Not involved
Not involved
dB
12
RNC
None.
Not involved
Not involved
None
None
RNC
When the value of [PARA]US EFE[/PAR A] in [MML]AD D NODEBES N[/MML] is set to Enable, this parameter should be set.
Not involved
Not involved
The IP address of the DHCP server must be one of the following addresses configured for the FG2a/GOU a/PEUa/UO Ia/POUa: equipment IP address, Ethernet port IP address, PPP link local IP address, and MLPPP group local IP address.
8/7/2013
14033267
162734118.xls.ms_office1
CFGMMLRNCXYYYYMM DDHHMM RNC SS.txt(EXP CFGMML) None(BKP DB)
None
None
Not involved
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
None
RNC
None
Not involved
Not involved
Not involved
None
D3
RNC
None
Not involved
Not involved
8/7/2013
14043267
162734118.xls.ms_office1
None
Not involved
Not involved
None
D32
D32
NodeB
This parameter is required when the [PARA]IsFi xedMachs WinSize[/P ARA] parameter is set to TRUE.
Not involved
Not involved
8/7/2013
14053267
162734118.xls.ms_office1
None
ON
ON
Cell
None
Not involved
Not involved
Fractional link(ADD FRALNK) Correspondi ng optical port(SET OPT) PPP Link(ADD PPPLNK) IMA group(ADD IMAGRP) LGC port(ADD ATMLOGI CPORT,AD D IPLOGICP ORT) MLPPP Group, PPP Link(ADD MPGRP) UNILNK(A DD UNILNK) Ethernet port(SET ETHPORT) None None RNC
None
ON(ADD ATMLOGI CPORT,AD D UNILNK,A DD MPGRP,A DD IPLOGICP ON ORT,ADD IMAGRP,A DD PPPLNK,A DD FRALNK) -(SET ETHPORT, SET OPT)
When the value of [PARA]FR ALNKT[/P ARA] in [MML]AD D FRALNK[/ MML] is set to ON, this parameter is valid and the flow control parameter index can be set. When the value of [PARA]BT[ /PARA] in [MML]SET OPT[/MML ] is set to UOIa and the value of [PARA]LG CAPPTYP E[/PARA] is set to ATM, the flow control none
Not involved
Not involved
Not involved
Not involved
Not involved
8/7/2013
14063267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
None
Not involved
In [MML]EXP ELABEL[/ MML], the [PARA]FN[ /PARA] parameter cannot be a space or any of the following characters: '@', '#', '!', '%', '^', '&', '*', '[', ']', '\'', '\\'.
None
OFF
RNC
None
Not involved
Not involved
8/7/2013
14073267
162734118.xls.ms_office1
None
NO
NO
IP Path
ms
IP Path
[PARA]FP MUXSWIT CH[/PARA ] in [MML]AD D IPPATH[/ MML] can be set YES only when the adjnode type is IUB. When the value of [PARA]FP MUXSWIT CH[/PARA ] in [MML]AD D IPPATH[/ MML] is set to YES, this parameter is valid.
Not involved
Not involved
Not involved
Not involved
byte
256
256
MLPPP Group
None
Not involved
Not involved
When this parameter is set to No_HC, you can disable the header compress function; when this parameter is set to RTP/UDP/I P_HC, you can enable the RTP/UDP/I P/PPP header compress function. This parameter cannot be modified.
None
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
14083267
162734118.xls.ms_office1
1. When the value of [PARA]FR ALNKT[/P ARA] in [MML]AD D FRALNK[/ MML] is set to FRAATM, the flow control switch and the flow control parameter index are required. 2. When the value of [PARA]FR ALNKT[/P ARA] in [MML]AD D FRALNK[/ MML] is set to FRAIMA, the IMA group
None
None
Fractional link
Not involved
Not involved
None
D128
D128
IMA group
None
Not involved
Not involved
None
None
Adjacent Node
The factor table index is configured by setting the value of [PARA]FTI [/PARA] in [MML]AD D FACTORT ABLE[/MM L].
Not involved
Not involved
8/7/2013
14093267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
14103267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
14113267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
14123267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
14133267
162734118.xls.ms_office1
If [PARA]BW ADJ[/PAR A] is set to be ON,[PARA ]FWDHOR SVBW[/PA RA],[PARA ]FWDCON GBW[/PAR A],[PARA] FWDCON GCLRBW[/ PARA] must obey Not the involved following rules: [PARA]FW DHORSVB W[/PARA] < [PARA]FW DCONGB W[/PARA] < [PARA]FW DCONGCL RBW[/PAR A] < [PARA]MI
kbit/s
PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) Fractional link(ADD FRALNK) IMA group(ADD IMAGRP) UNILNK(A DD UNILNK) LGC port(ADD IPLOGICP ORT)
Not involved
Not involved
The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < forward congestion clear threshold, or forward handover reserved bandwidth = forward congestion threshold = forward congestion clear threshold = 0
kbit/s
LGC port
None
Not involved
8/7/2013
14143267
162734118.xls.ms_office1
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type
kbit/s
AAL2 Path
None
Not involved
Not involved
8/7/2013
14153267
162734118.xls.ms_office1
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type
kbit/s
IP Path
[PARA]FW DHORSVB W[/PARA]/ [PARA]FW DCONGB W[/PARA]/ [PARA]FW DCONGCL RBW[/PAR A] in [MML]AD D IPPATH[/ MML] must be all zero when [PARA]Tx Bw[/PARA] is zero,or [PARA]FW DHORSVB W[/PARA] < [PARA]FW DCONGB W[/PARA] < [PARA]FW DCONGCL RBW[/PAR A] <
Not involved
Not involved
8/7/2013
14163267
162734118.xls.ms_office1
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type
kbit/s
[PARA]FW DHORSVB W[/PARA]/ [PARA]FW DCONGB W[/PARA]/ [PARA]FW DCONGCL Transmissio RBW[/PAR n resource A] in group [MML]AD D RSCGRP[/ MML] must be all zero when [PARA]Tx Bw[/PARA] is zero.
Not involved
Not involved
8/7/2013
14173267
162734118.xls.ms_office1
The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < forward congestion clear threshold, or forward handover reserved bandwidth = forward congestion threshold = forward congestion clear threshold = 0
kbit/s
PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) Fractional link(ADD None FRALNK) IMA group(ADD IMAGRP) UNILNK(A DD UNILNK)
Not involved
Not involved
Not involved
8/7/2013
14183267
162734118.xls.ms_office1
If [PARA]BW ADJ[/PAR A] is set to be ON,[PARA ]FWDHOR SVBW[/PA RA],[PARA ]FWDCON GBW[/PAR A],[PARA] FWDCON GCLRBW[/ PARA] must obey the following rules: [PARA]FW DHORSVB W[/PARA] < [PARA]FW DCONGB W[/PARA] < [PARA]FW DCONGCL RBW[/PAR A] < [PARA]MI
kbit/s
LGC port
Not involved
Not involved
kbit/s
LGC port
None
Not involved
8/7/2013
14193267
162734118.xls.ms_office1
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type
kbit/s
AAL2 Path
None
Not involved
Not involved
8/7/2013
14203267
162734118.xls.ms_office1
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type
kbit/s
IP Path
[PARA]FW DHORSVB W[/PARA]/ [PARA]FW DCONGB W[/PARA]/ [PARA]FW DCONGCL RBW[/PAR A] in [MML]AD D IPPATH[/ MML] must be all zero when [PARA]Tx Bw[/PARA] is zero,or [PARA]FW DHORSVB W[/PARA] < [PARA]FW DCONGB W[/PARA] < [PARA]FW DCONGCL RBW[/PAR A] <
Not involved
Not involved
8/7/2013
14213267
162734118.xls.ms_office1
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type
kbit/s
[PARA]FW DHORSVB W[/PARA]/ [PARA]FW DCONGB W[/PARA]/ [PARA]FW DCONGCL Transmissio RBW[/PAR n resource A] in group [MML]AD D RSCGRP[/ MML] must be all zero when [PARA]Tx Bw[/PARA] is zero.
Not involved
Not involved
8/7/2013
14223267
162734118.xls.ms_office1
If [PARA]BW ADJ[/PAR A] is set to be ON,[PARA ]FWDHOR SVBW[/PA RA],[PARA ]FWDCON GBW[/PAR A],[PARA] FWDCON GCLRBW[/ PARA] must obey Not the involved following rules: [PARA]FW DHORSVB W[/PARA] < [PARA]FW DCONGB W[/PARA] < [PARA]FW DCONGCL RBW[/PAR A] < [PARA]MI
kbit/s
PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) Fractional link(ADD FRALNK) IMA group(ADD IMAGRP) UNILNK(A DD UNILNK) LGC port(ADD IPLOGICP ORT)
Not involved
Not involved
The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < forward congestion clear threshold, or forward handover reserved bandwidth = forward congestion threshold = forward congestion clear threshold = 0
kbit/s
LGC port
None
Not involved
8/7/2013
14233267
162734118.xls.ms_office1
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type
kbit/s
AAL2 Path
None
Not involved
Not involved
8/7/2013
14243267
162734118.xls.ms_office1
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type
kbit/s
IP Path
[PARA]FW DHORSVB W[/PARA]/ [PARA]FW DCONGB W[/PARA]/ [PARA]FW DCONGCL RBW[/PAR A] in [MML]AD D IPPATH[/ MML] must be all zero when [PARA]Tx Bw[/PARA] is zero,or [PARA]FW DHORSVB W[/PARA] < [PARA]FW DCONGB W[/PARA] < [PARA]FW DCONGCL RBW[/PAR A] <
Not involved
Not involved
8/7/2013
14253267
162734118.xls.ms_office1
The following constraints should be fulfilled separately in forward or backward configuratio ns: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type
kbit/s
[PARA]FW DHORSVB W[/PARA]/ [PARA]FW DCONGB W[/PARA]/ [PARA]FW DCONGCL Transmissio RBW[/PAR n resource A] in group [MML]AD D RSCGRP[/ MML] must be all zero when [PARA]Tx Bw[/PARA] is zero.
Not involved
Not involved
None
None
Physical channel
None
15
15
Physical channel
Either [PARA]Gai nFactorBeta C[/PARA] or [PARA]Gai nFactorBeta D[/PARA] should be set to 15. Either [PARA]Gai nFactorBeta C[/PARA] or [PARA]Gai nFactorBeta D[/PARA] should be set to 15.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
8/7/2013
14263267
162734118.xls.ms_office1
None
None
Ethernet port
[MMLWhe n the value of [PARA]CH KTYPE[/P ARA] in [MML]STR Not IPCHK[/M involved ML] is set to SBFD or ARP, the gateway IP address should be set. N (no impact on the UE in idle mode)
Not involved
Not involved
None
None
Cell
None
Not involved
Not involved
None
DEG
DEG
RNC
When the value of [PARA]GC DF[/PARA] in [MML]AD D GPS[/MML ] is selected as DEG, LATITUDE and LONGTIT UDE should be set; Not When the involved value of [PARA]GC DF[/PARA] in [MML]AD D GPS[/MML ] is selected as SEC, LATITUDE SEC and LONGITU DESEC should be set.
Not involved
Not involved
8/7/2013
14273267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
70
70
RNC
None
Not involved
Not involved
per cent
70
70
RNC
None
Not involved
Not involved
8/7/2013
14283267
162734118.xls.ms_office1
The following relationship must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= [PARA]Cop perMaxMod e[/PARA]. The following relationship must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= [PARA]Cop perMaxMod e[/PARA].
kbit/s
WBAMR_ BITRATE_ Cell(ADD 23.85K(AD WBAMR_ CELLAMR D BITRATE_ CWB) CELLAMR 23.85K RNC(SET CWB) AMRCWB) -(SET AMRCWB)
Not involved
Not involved
8/7/2013
14293267
162734118.xls.ms_office1
The following relationship must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= NBAMR_B [PARA]Cop Cell(ADD ITRATE_1 perMaxMod NBAMR_B CELLAMR 2.20K(ADD e[/PARA]. ITRATE_1 C) CELLAMR The 2.20K RNC(SET C) following AMRC) -(SET relationship AMRC) must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= [PARA]Cop perMaxMod e[/PARA].
kbit/s
Not involved
Not involved
8/7/2013
14303267
162734118.xls.ms_office1
None
OFF
OFF
Cell
None
Not involved
Not involved
min
10
10
Cell
None
Not involved
Not involved
The parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.
None
None
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
8/7/2013
14313267
162734118.xls.ms_office1
This paramter is valid only when [PARA]Cel lChoice[/PA RA] is set to GSMCELL.
None
None
Cell
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
None
Cell
None
Not involved
Not involved
None
512
RNC
None
Not involved
Not involved
8/7/2013
14323267
162734118.xls.ms_office1
kbit/s
RNC
None.
Not involved
Not involved
None
Mode0
Mode0
RNC
None
Not involved
Not involved
8/7/2013
14333267
162734118.xls.ms_office1
This parameter is required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_ED CH_2MS or TRCH_ED CH_10MS but not required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_HS DSCH.
ms
D50
D50
RAB
Not involved
Not involved
ms
5000
5000
SCTP
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
Cell
None
Not involved
Not involved
8/7/2013
14343267
162734118.xls.ms_office1
This parameter is valid only when [PARA]Use OfHcs[/PA RA] is set to USED. This paramter is valid only when [PARA]Use OfHcs[/PA RA] is set to USED. This parameter is valid only when [PARA]Use OfHcs[/PA RA] is set to TRUE.
None
Not involved
Not involved
per cent
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
14353267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM, the parameter is UBR; transimssio n type is dual stack or IP, the parameter is AF13; transimssio n type is RNC dual stack or Hybird IP, the parameter is LQAF13. When the interface type is Iur, transmissio n type is ATM, the parameter is UBR; transimssio n type is IP, the
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
30
30
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
14363267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is UBR; RNC transimssio n type is Hybird IP, the parameter is AF13. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
14373267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
70
70
RNC
None
Not involved
Not involved
8/7/2013
14383267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC AF33. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF43.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
14393267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF43; RNC transimssio n type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
RNC
None
Not involved
Not involved
None
30
30
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
14403267
162734118.xls.ms_office1
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
100
100
RNC
None
Not involved
Not involved
per cent
100
100
RNC
None
Not involved
Not involved
8/7/2013
14413267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM, the parameter is UBR; transimssio n type is dual stack or IP, the parameter is AF23; transimssio n type is RNC dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmissio n type is ATM, the parameter is UBR; transimssio n type is IP, the
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
14423267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is UBR; RNC transimssio n type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
14433267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM, the parameter is UBR; transimssio n type is dual stack or IP, the parameter is AF23; transimssio n type is RNC dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmissio n type is ATM, the parameter is UBR; transimssio n type is IP, the
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
14443267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is UBR; RNC transimssio n type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
14453267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM, the parameter is UBR; transimssio n type is dual stack or IP, the parameter is AF23; transimssio n type is RNC dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmissio n type is ATM, the parameter is UBR; transimssio n type is IP, the
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
14463267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is UBR; RNC transimssio n type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
30
30
RNC
None
Not involved
Not involved
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
14473267
162734118.xls.ms_office1
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
30
30
RNC
None
Not involved
Not involved
None
100
100
RNC
None
Not involved
Not involved
per cent
15
15
RNC
None
Not involved
Not involved
8/7/2013
14483267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC EF. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is EF.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
14493267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is EF; RNC transimssio n type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
14503267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
50
50
RNC
None
Not involved
Not involved
8/7/2013
14513267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC EF. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is EF.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
14523267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is EF; RNC transimssio n type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
14533267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
100
100
RNC
None
Not involved
Not involved
8/7/2013
14543267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC AF33. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF43.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
14553267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF43; RNC transimssio n type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
14563267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
70
70
RNC
None
Not involved
Not involved
8/7/2013
14573267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC AF33. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF43.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
14583267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF43; RNC transimssio n type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
None
RNC
When the value of [PARA]HC ARRYT[/P ARA] in [MML]AD D Not VPCLCX[/ involved MML] is set to FRAATM, this parameter should be set.
Not involved
Not involved
8/7/2013
14593267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
RNC
When the value of [PARA]HC ARRYT[/P ARA] in [MML]AD Not D involved VPCLCX[/ MML] is set to IMA, this parameter should be set.
Not involved
Not involved
8/7/2013
14603267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
ms
5000
RNC
None
Not involved
Not involved
ms
5000
RNC
None
Not involved
Not involved
None
Cell
None
Not involved
Not involved
ms
5000
RNC
None
Not involved
Not involved
ms
5000
RNC
None
Not involved
Not involved
ms
5000
RNC
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
8/7/2013
14613267
162734118.xls.ms_office1
None
None
Not involved
Not involved
8/7/2013
14623267
162734118.xls.ms_office1
HO_ALGO _HCS_SPE ED_EST_S WITCH:OF F, HO_ALGO _LDR_ALL OW_SHO_ SWITCH:O N, HO_ALGO _MBMS_F LC_SWITC H:OFF, HO_ALGO _OVERLA RNC Y_SWITC H:OFF, HO_INTER _FREQ_HA RD_HO_S WITCH:OF F, HO_INTER _FREQ_RP RT_2D2F_ SWITCH:O N, HO_INTER _RAT_CS_ OUT_SWIT CH:ON,
None
None
Not involved
Not involved
8/7/2013
14633267
162734118.xls.ms_office1
dB
-16
-16
Cell
None
Not involved
Not involved
dB
-92
-92
Cell
None
Not involved
Not involved
8/7/2013
14643267
162734118.xls.ms_office1
ms
5000
RNC
None
Not involved
Not involved
None
None
RNC
When the value of [PARA]HC ARRYT[/P ARA] in [MML]AD D Not VPCLCX[/ involved MML] is set to NCOPT, this parameter should be set. This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.
Not involved
Not involved
None
100
RNC
Not involved
Not involved
8/7/2013
14653267
162734118.xls.ms_office1
per cent
30
30
Cell
None
Not involved
Not involved
8/7/2013
14663267
162734118.xls.ms_office1
None
TRUE
RNC
None
Not involved
Not involved
None
50
RNC
None
100
RNC
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER. This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.
Not involved
Not involved
Not involved
Not involved
8/7/2013
14673267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
None
100
RNC
None
Not involved
Not involved
None
60
RNC
None
Not involved
Not involved
8/7/2013
14683267
162734118.xls.ms_office1
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.
None
100
RNC
Not involved
Not involved
per cent
70
70
Cell
None
Not involved
Not involved
kbit/s
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
14693267
162734118.xls.ms_office1
This paramter is valid only when [PARA]Dy nShutDown Type[/PAR A] is set to Conditional ShutDown. This parameter is associated with the setting of the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter. It is required when the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter is set to a value within the range of D1 to D8.
None
Cell
Not involved
Not involved
bit
336
336
RAB
Not involved
Not involved
8/7/2013
14703267
162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter. It is required when the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter is set to a value within the range of D2 to D8. This parameter is associated with the setting of the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter. It is required when the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter is set to a value within the range of D3 to D8.
bit
None
RAB
Not involved
Not involved
bit
None
RAB
Not involved
Not involved
8/7/2013
14713267
162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter. It is required when the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter is set to a value within the range of D4 to D8. This parameter is associated with the setting of the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter. It is required when the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter is set to a value within the range of D5 to D8.
bit
None
RAB
Not involved
Not involved
bit
None
RAB
Not involved
Not involved
8/7/2013
14723267
162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter. It is required when the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter is set to a value within the range of D6 to D8. This parameter is associated with the setting of the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter. It is required when the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter is set to D7 or D8.
bit
None
RAB
Not involved
Not involved
bit
None
RAB
Not involved
Not involved
8/7/2013
14733267
162734118.xls.ms_office1
This parameter is associated with the setting of the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter. It is required when the [PARA]Hsd schMacdPd uSizeNum[/ PARA] parameter is set to D8. This parameter is required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_HS DSCH but not required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_ED CH_2MS or TRCH_ED CH_10MS.
bit
None
RAB
Not involved
Not involved
None
D1
D1
RAB
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
14743267
162734118.xls.ms_office1
None
None
Not involved
Not involved
None
MIMO
RNC
None
Not involved
Not involved
8/7/2013
14753267
162734118.xls.ms_office1
None
None
Cell
None
Not involved
Not involved
8/7/2013
14763267
162734118.xls.ms_office1
dB
Cell
None
Not involved
Not involved
8/7/2013
14773267
162734118.xls.ms_office1
RNC
None
Not involved
Not involved
None
None
RNC
This parameter is listed when the value of [PARA]Tb Num[/PAR A] is D1, D2, D3, or D4.
Not involved
Not involved
8/7/2013
14783267
162734118.xls.ms_office1
None
None
RNC
This parameter is listed when the value of [PARA]Tb Num[/PAR A] is D2, D3, or D4.
Not involved
Not involved
None
None
RNC
Not involved
Not involved
None
None
RNC
Not involved
Not involved
8/7/2013
14793267
162734118.xls.ms_office1
None
Cell
This paramter is valid only when [PARA]All ocCodeMod e[/PARA] is set to Manual.
Not involved
Not involved
8/7/2013
14803267
162734118.xls.ms_office1
None
Cell
This paramter is valid only when [PARA]All ocCodeMod e[/PARA] is set to Automatic and the value of this parameter must satisfy the following relationship: [PARA]Hs PdschMaxC odeNum[/P ARA] >= [PARA]Hs PdschMinC odeNum[/P ARA].
Not involved
Not involved
8/7/2013
14813267
162734118.xls.ms_office1
None
Cell
This paramter is valid only when [PARA]All ocCodeMod e[/PARA] is set to Automatic and the value of this parameter must satisfy the following relationship: [PARA]Hs PdschMaxC odeNum[/P ARA] >= [PARA]Hs PdschMinC odeNum[/P ARA].
Not involved
Not involved
8/7/2013
14823267
162734118.xls.ms_office1
dB
2.5dB
2.5dB
Cell
None
Not involved
Not involved
None
None
None
This paramter is valid only when [PARA]Tx DiversityInd [/PARA] is set to TRUE. Y This parameter is valid only when [PARA]Tx DiversityInd [/PARA] is set to TRUE.
Cell
8/7/2013
14833267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
None
Cell
None
Not involved
Not involved
ms
D100
RNC
None
Not involved
Not involved
8/7/2013
14843267
162734118.xls.ms_office1
ms
D50
RNC
None
Not involved
Not involved
ms
D100
RNC
None
Not involved
Not involved
ms
D50
RNC
None
Not involved
Not involved
None
100
RNC
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD,SIL VER, or COPPER.
Not involved
Not involved
8/7/2013
14853267
162734118.xls.ms_office1
kbit/s
D5760
RNC
None
Not involved
Not involved
None
MBR
MBR
NodeB
None
Not involved
Not involved
8/7/2013
14863267
162734118.xls.ms_office1
None
None
Not involved
Not involved
None
50
RNC
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.
Not involved
Not involved
8/7/2013
14873267
162734118.xls.ms_office1
None
This parameter is available if DRA_DCC C_SWITCH and DRA_HSU PA_DCCC_ SWITCH are set to ON in [MML]SET CORRMAL GOSWITC H[/MML] is YES.
Not involved
Not involved
per cent
100
100
Cell
None
Not involved
Not involved
8/7/2013
14883267
162734118.xls.ms_office1
per cent
100
100
Cell
None
Not involved
Not involved
8/7/2013
14893267
162734118.xls.ms_office1
This parameter can be used for selection of the initial rate for HSUPA BE services only when the DCCC_SW ITCH under the [PARA]Chs witch[/PAR A] parameter and the HSUPA_D CCC_SWIT CH under the [PARA]Hsp aSwitch[/P ARA] parameter are set to on through the [MML]SET CORRMAL GOSWITC H[/MML] This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.
kbit/s
D256
RNC
Not involved
Not involved
None
100
RNC
Not involved
Not involved
8/7/2013
14903267
162734118.xls.ms_office1
per cent
100
100
Cell
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
None
100
RNC
None
Not involved
Not involved
8/7/2013
14913267
162734118.xls.ms_office1
None
60
RNC
None
Not involved
Not involved
None
100
RNC
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
kbit/s
None
RNC
None
Not involved
Not involved
Not involved
per cent
50
50
Cell
The value of this parameter must satisfy the following relationship: [PARA]Hsu pAuRetrnsL dTrigThd[/P ARA] >= [PARA]Hsu pAuRetrnsL dRelThd[/P ARA].
Not involved
Not involved
8/7/2013
14923267
162734118.xls.ms_office1
per cent
70
70
Cell
The value of this parameter must satisfy the following relationship: [PARA]Hsu pAuRetrnsL dTrigThd[/P ARA] >= [PARA]Hsu pAuRetrnsL dRelThd[/P ARA]. This paramter is valid only when [PARA]Dy nShutDown Type[/PAR A] is set to Conditional ShutDown.
Not involved
Not involved
None
Cell
Not involved
Not involved
8/7/2013
14933267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM, the parameter is UBR; transimssio n type is dual stack or IP, the parameter is AF13; transimssio n type is RNC dual stack or Hybird IP, the parameter is LQAF13. When the interface type is Iur, transmissio n type is ATM, the parameter is UBR; transimssio n type is IP, the
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
30
30
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
14943267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is UBR; RNC transimssio n type is Hybird IP, the parameter is AF13. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
14953267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
100
100
RNC
None
Not involved
Not involved
8/7/2013
14963267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC AF33. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF43.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
14973267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF43; RNC transimssio n type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
14983267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
per cent
70
70
RNC
None
Not involved
Not involved
None
30
30
RNC
None
Not involved
Not involved
None
100
100
RNC
None
Not involved
Not involved
8/7/2013
14993267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
100
100
RNC
None
Not involved
Not involved
8/7/2013
15003267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM, the parameter is UBR; transimssio n type is dual stack or IP, the parameter is AF23; transimssio n type is RNC dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmissio n type is ATM, the parameter is UBR; transimssio n type is IP, the
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
15013267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is UBR; RNC transimssio n type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
15023267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM, the parameter is UBR; transimssio n type is dual stack or IP, the parameter is AF23; transimssio n type is RNC dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmissio n type is ATM, the parameter is UBR; transimssio n type is IP, the
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
15033267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is UBR; RNC transimssio n type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
15043267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM, the parameter is UBR; transimssio n type is dual stack or IP, the parameter is AF23; transimssio n type is RNC dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmissio n type is ATM, the parameter is UBR; transimssio n type is IP, the
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
15053267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is UBR; RNC transimssio n type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
30
30
RNC
None
Not involved
Not involved
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
15063267
162734118.xls.ms_office1
None
OPEN
OPEN
SRB
None
Not involved
Not involved
Not involved
None
per cent
80
80
SRB
None
Not involved
Not involved
Not involved
None
per cent
10
10
SRB
None
Not involved
Not involved
Not involved
None
None
30
30
RNC
None
Not involved
Not involved
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
15073267
162734118.xls.ms_office1
None
None
RNC
When the value of [PARA]HC ARRYT[/P ARA] in [MML]AD Not D involved VPCLCX[/ MML] is set to UNI, this parameter should be set.
Not involved
Not involved
None
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC EF. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is EF.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
15083267
162734118.xls.ms_office1
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
None
100
100
RNC
None
Not involved
Not involved
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is EF; RNC transimssio n type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
15093267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
15
15
RNC
None
Not involved
Not involved
8/7/2013
15103267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC EF. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is EF.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
15113267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is EF; RNC transimssio n type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
15123267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
50
50
RNC
None
Not involved
Not involved
8/7/2013
15133267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC AF33. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF43.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
15143267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF43; RNC transimssio n type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
15153267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
100
100
RNC
None
Not involved
Not involved
8/7/2013
15163267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC EF. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is EF.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
15173267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is EF; RNC transimssio n type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
15183267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
70
70
RNC
None
Not involved
Not involved
None
None
RNC
When the value of [PARA]CX T[/PARA] in [MML]AD D Not VPCLCX[/ involved MML] is set to VCLCX, this parameter should be set.
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
15193267
162734118.xls.ms_office1
dB
Not involved
Not involved
8/7/2013
15203267
162734118.xls.ms_office1
dB
Not involved
Not involved
8/7/2013
15213267
162734118.xls.ms_office1
dB
Not involved
Not involved
8/7/2013
15223267
162734118.xls.ms_office1
dB
Not involved
Not involved
8/7/2013
15233267
162734118.xls.ms_office1
dB
Not involved
Not involved
8/7/2013
15243267
162734118.xls.ms_office1
dB
Not involved
Not involved
8/7/2013
15253267
162734118.xls.ms_office1
dB/ dBm
This parameter is valid when [PARA]Inte rFreqReport Mode[/PAR A] is set to EVENT_T RIGGER.
Not involved
Not involved
dB
6(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO 6 NCOV) -(SET INTERFRE QHONCOV )
Cell(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO None NCOV) RNC(SET INTERFRE QHONCOV )
Not involved
Not involved
8/7/2013
15263267
162734118.xls.ms_office1
dB/ dBm
4(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) 4 -(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)
Cell(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) None RNC(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)
Not involved
Not involved
8/7/2013
15273267
162734118.xls.ms_office1
dB/ dBm
4(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) 4 -(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)
Cell(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) None RNC(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)
Not involved
Not involved
8/7/2013
15283267
162734118.xls.ms_office1
dB
This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to EVENT_T RIGGER.
Not involved
Not involved
8/7/2013
15293267
162734118.xls.ms_office1
dB
0(ADD CELLMBD RINTERRA T,ADD CELLINTE 0 RRATHON COV) -(SET INTERRAT HONCOV)
Cell(ADD CELLINTE RRATHON COV) RNC(ADD None CELLMBD RINTERRA T,SET INTERRAT HONCOV)
Not involved
Not involved
8/7/2013
15303267
162734118.xls.ms_office1
dB
This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to PERIODIC AL_REPO RTING.
Not involved
Not involved
8/7/2013
15313267
162734118.xls.ms_office1
dB/ dBm
0(ADD CELLMBD RINTERFR EQ,ADD CELLINTE 0 RFREQHO COV) -(SET INTERFRE QHOCOV)
Cell(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)
This parameter is valid when [PARA]Inte rFreqReport Mode[/PAR A] is set to PERIODIC AL_REPO RTING.
Not involved
Not involved
720
RNC
None
Not involved
Not involved
For details of the timer, refer to ITUT Q.714. The modificatio n is not recommend ed.
90
RNC
None
Not involved
Not involved
For details of the timer, refer to ITUT Q.714. The modificatio n is not recommend ed.
8/7/2013
15323267
162734118.xls.ms_office1
When the value of [PARA]PA THCHK[/P ARA] in [MML]AD D IPPATH[/ MML] is set to ENABLED, this parameter is valid.
When the network is in poor running status, the packet size cannot be set to a large value. If the value is too large, the path status may be affected. The parameter modificatio n has no impact on the equipment.
byte
64
64
IP Path
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
Cell
None
Not involved
Not involved
8/7/2013
15333267
162734118.xls.ms_office1
None
This parameter is valid only when [PARA]Idle CellBarred[/ PARA] is set to BARRED.
Not involved
Not involved
8/7/2013
15343267
162734118.xls.ms_office1
dB
Cell
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
15353267
162734118.xls.ms_office1
dB
Cell
This parameter is valid only when [PARA]Qu alMeas[/PA RA] is set to CPICH_EC NO.
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
15363267
162734118.xls.ms_office1
dB
Cell
N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to choose this neighbourin Not g cell in cell involved reselection process. On the other hand. the smaller the value is, the higher the possibility for the UE to choose this neighbourin g cell.)
Not involved
8/7/2013
15373267
162734118.xls.ms_office1
dB
Cell
N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to choose this neighbourin Not g cell in cell involved reselection process. On the other hand. the smaller the value is, the higher the possibility for the UE to choose this neighbourin g cell.)
Not involved
8/7/2013
15383267
162734118.xls.ms_office1
dB
127
127
Cell
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
15393267
162734118.xls.ms_office1
dB
127
127
Cell
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
15403267
162734118.xls.ms_office1
D320
D320
Cell
This parameter is valid only when [PARA]Idle CellBarred[/ PARA] is set to BARRED.
Not involved
Not involved
ms
None
Not involved
Not involved
Modifying this parameter does not affect the existing SAAL link but may affect the next setup of the SAAL link.
8/7/2013
15413267
162734118.xls.ms_office1
30
RNC
None
Not involved
Not involved
ms
20000
RNC
None
Not involved
Not involved
The parameter value of IgorTmr must be less than the value of [PARA]Intr Tmr[/PARA ] set in [MML]SET IUTIMERA NDNUM[/ MML].The parameter modificatio n has no impact on the equipment.
8/7/2013
15423267
162734118.xls.ms_office1
None
None
Not involved
Not involved
Not involved
None
None
IMA group
None
Not involved
Not involved
[IMA ID] is used to identify the IMA group. Normally, in one interface board, the sending IMA ID can not be the same. In order to avoid duplicate IMA ID between RNC and NodeB, it is suggested that the IMA ID in RNC is set different from that in NodeB.
8/7/2013
15433267
162734118.xls.ms_office1
For AEUa, the sum of UNI/IMA/F RA can not exceed 32,for AOUa, the sum of UNI/IMA/F RA on an optical port IMA can not group(ADD exceed IMALNK) 63(E1)/84(T Not IMA 1) involved link(STR When the IMATST) value of [PARA]PF MT[/PARA ] in [MML]RST PFMM[/M ML] is set to IMALNK, the value of IMALNKN can be set.
None
None
Not involved
Not involved
None
V1.1
None
Not involved
Not involved
The protocol version of IMA group in RNC must be the same with that in the peer device.
8/7/2013
15443267
162734118.xls.ms_office1
None
OFF
RNC
None
Not involved
Not involved
None
DCH
RNC
None.
Not involved
Not involved
8/7/2013
15453267
162734118.xls.ms_office1
kbit/s
32
32
Cell
This parameter must satisfy the following relationship: [PARA]IM SMBR[/PA RA] >= [PARA]IM SGBR[/PA RA].
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
RNC
None
None
RNC
The parameter must be greater than or equal to [PARA]Ims iMin[/PAR A] in [MML]AD D IMSISNAM AP[/MML]. The parameter must be less than or equal to [PARA]Ims iMax[/PAR A] in [MML]AD D IMSISNAM AP[/MML].
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
8/7/2013
15463267
162734118.xls.ms_office1
kbit/s
D32
RNC
This parameter is required when the [PARA]Ims BearEnhanc edSwitch[/P ARA] parameter is set to ON.
Not involved
Not involved
None
None
RNC
None
None
RNC
This parameter must be less than or equal to [PARA]Ims iRtMax[/PA RA] in [MML]AD D IMSIIDNN SCNIDMA P[/MML]. This parameter must be greater than or equal to [PARA]Ims iRtMin[/PA RA] in [MML]AD D IMSIIDNN SCNIDMA P[/MML].
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
8/7/2013
15473267
162734118.xls.ms_office1
kbit/s
512
512
Cell
This parameter must satisfy the following relationship: [PARA]IM SMBR[/PA RA] >= [PARA]IM SGBR[/PA RA].
Not involved
Not involved
None
None
RNC
Not involved
Not involved
8/7/2013
15483267
162734118.xls.ms_office1
None
None
RNC
Not involved
Not involved
None
None
RNC
Not involved
Not involved
None
OPEN
OPEN
SRB
None
Not involved
Not involved
Not involved
None
8/7/2013
15493267
162734118.xls.ms_office1
Only the OM channel can be kept between the logically inhibited board and the other boards, whereas the service channel between them will be inhibited. The operator can run some OM commands on this inhibited board. The physically inhibited board becomes unavailable, and the board status and the equipment For parameter modificatio n, refer to ITU-T Q.2110. The parameter modificatio n has no impact on the equipment.
None
None
RNC
When the value of [PARA]IN HT[/PARA] in [MML]INH BRD[/MM L] is set to LOGIC,the value range of [PARA]SN[ /PARA] is 0, 2, 4, 8 to Y 27. When the value of [PARA]IN HT[/PARA] in [MML]INH BRD[/MM L] is set to PHYSICAL ,the value range of [PARA]SN[ /PARA] is 0 to 5, 8 to 27.
RNC
ms
1500
1500
SAAL
When the value of [PARA]SA ALLNKT[/ PARA] is set to NNI, this parameter is
Not involved
Not involved
None
UIA1-1
RNC
None
Not involved
Not involved
8/7/2013
15503267
162734118.xls.ms_office1
kbit/s
32
32
Cell
This parameter must satisfy the following relationship: [PARA]IN TERACTM BR[/PARA] >= [PARA]IN TERACTG BR[/PARA] .
Not involved
Not involved
kbit/s
512
512
Cell
This parameter must satisfy the following relationship: [PARA]IN TERACTM BR[/PARA] >= [PARA]IN TERACTG BR[/PARA] .
Not involved
Not involved
8/7/2013
15513267
162734118.xls.ms_office1
None
CSAMR_I NTERFRE Q:OFF, CSNONAM R_INTERF REQ:OFF, Cell PSR99_INT ERFREQ:O FF, PSHSPA_I NTERFRE Q:OFF
None
Not involved
Not involved
dB
-16
-16
Cell
None
Not involved
Not involved
8/7/2013
15523267
162734118.xls.ms_office1
dB
The value of this parameter must be smaller than [PARA]Inte rFreqCsThd 2FEcN0[/P ARA].
Not involved
Not involved
8/7/2013
15533267
162734118.xls.ms_office1
dBm
The value of this parameter must be smaller than [PARA]Inte rFreqCsThd 2FRscp[/PA RA].
Not involved
Not involved
8/7/2013
15543267
162734118.xls.ms_office1
dB
The value of this parameter must be larger than [PARA]Inte rFreqCsThd 2DEcN0[/P ARA].
Not involved
Not involved
8/7/2013
15553267
162734118.xls.ms_office1
dBm
The value of this parameter must be larger than [PARA]Inte rFreqCsThd 2DRscp[/P ARA].
Not involved
Not involved
8/7/2013
15563267
162734118.xls.ms_office1
None
80
80
Cell
None
Not involved
Not involved
8/7/2013
15573267
162734118.xls.ms_office1
For low speed(5km/ h):Range is D4~D6, the recommend ed value is D5; for middle speed(50km /h):Range is D3~D4, the recommend ed value is D4; for high speed(120k m/h):Range is D2~D4, the recommend ed value is D2; universal value:Range is D3~D6, the recommend ed value is D3.(SET INTERFRE QHOCOV, ADD
None
D3(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO NCOV,AD D CELLINTE RFREQHO COV) -(SET INTERFRE QHONCOV ,SET INTERFRE QHOCOV)
Cell(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO NCOV,AD D CELLINTE None RFREQHO COV) RNC(SET INTERFRE QHONCOV ,SET INTERFRE QHOCOV)
Not involved
Not involved
8/7/2013
15583267
162734118.xls.ms_office1
None
None
Not involved
Not involved
8/7/2013
15593267
162734118.xls.ms_office1
dB
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]; Also the value of this parameter must be smaller than [PARA]Inte rFreqHThd2 FEcN0[/PA RA].
Not involved
Not involved
8/7/2013
15603267
162734118.xls.ms_office1
dBm
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]; Also the value of this parameter must be smaller than [PARA]Inte rFreqHThd2 FRscp[/PA RA].
Not involved
Not involved
8/7/2013
15613267
162734118.xls.ms_office1
dB
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]; Also the value of this parameter must be larger than [PARA]Inte rFreqHThd2 DEcN0[/PA RA].
Not involved
Not involved
8/7/2013
15623267
162734118.xls.ms_office1
dBm
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]; Also the value of this parameter must be larger than [PARA]Inte rFreqHThd2 DRscp[/PA RA].
Not involved
Not involved
8/7/2013
15633267
162734118.xls.ms_office1
None
None
Not involved
Not involved
8/7/2013
15643267
162734118.xls.ms_office1
None
None
Not involved
Not involved
8/7/2013
15653267
162734118.xls.ms_office1
60(ADD CELLINTE RFREQHO NCOV,AD D CELLINTE RFREQHO COV) -(SET INTERFRE QHONCOV ,SET INTERFRE QHOCOV) 3(ADD CELLMBD RINTERFR EQ)
60(SET INTERFRE QHONCOV ,ADD CELLINTE RFREQHO NCOV,SET INTERFRE QHOCOV, ADD CELLINTE RFREQHO COV) 3(ADD CELLMBD RINTERFR EQ)
Cell(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO NCOV,AD D CELLINTE None RFREQHO COV) RNC(SET INTERFRE QHONCOV ,SET INTERFRE QHOCOV)
Not involved
Not involved
None
OFF
Not involved
Not involved
8/7/2013
15663267
162734118.xls.ms_office1
dB
-16
RNC
None
Not involved
Not involved
dB
The value of this parameter must be smaller than [PARA]Inte rFreqR99Ps Thd2FEcN0 [/PARA].
Not involved
Not involved
8/7/2013
15673267
162734118.xls.ms_office1
dBm
The value of this parameter must be smaller than [PARA]Inte rFreqR99Ps Thd2FRscp[ /PARA].
Not involved
Not involved
8/7/2013
15683267
162734118.xls.ms_office1
dB
The value of this parameter must be larger than [PARA]Inte rFreqR99Ps Thd2DEcN 0[/PARA].
Not involved
Not involved
8/7/2013
15693267
162734118.xls.ms_office1
dBm
The value of this parameter must be larger than [PARA]Inte rFreqR99Ps Thd2DRscp [/PARA].
Not involved
Not involved
8/7/2013
15703267
162734118.xls.ms_office1
None
None
Not involved
Not involved
8/7/2013
15713267
162734118.xls.ms_office1
None
Cell(ADD CELLMBD RINTERFR EQ,ADD CELLINTE None RFREQHO COV) RNC(SET EVENT_T EVENT_T INTERFRE RIGGER(A RIGGER(A QHOCOV) DD DD CELLMBD CELLMBD RINTERFR RINTERFR EQ) EQ)
Not involved
Not involved
None
255
255
Cell
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
15723267
162734118.xls.ms_office1
None
80
80
Cell
None
Not involved
Not involved
None
NO
RNC
None
Not involved
Not involved
If the Inter RAT Inter Plmn Ho Allowed is switched off,Neighbo r cells belonging to different PLMNs in the inter RAT should be removed.
8/7/2013
15733267
162734118.xls.ms_office1
None
NO
RNC
None
Not involved
Not involved
If the Intra RAT Inter Plmn Ho Allowed is switched off,Neighbo r cells belonging to different PLMNs in the intra RAT should be removed. The parameter modificatio n has no impact on the equipment.
None
This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to EVENT_T RIGGER.
Not involved
Not involved
dB
The value of this parameter must be smaller than [PARA]Inte rRatCsThd2 FEcN0[/PA RA].
Not involved
Not involved
8/7/2013
15743267
162734118.xls.ms_office1
dBm
The value of this parameter must be smaller than [PARA]Inte rRatCsThd2 FRscp[/PA RA].
Not involved
Not involved
8/7/2013
15753267
162734118.xls.ms_office1
dB
The value of this parameter must be larger than [PARA]Inte rRatCsThd2 DEcN0[/PA RA].
Not involved
Not involved
8/7/2013
15763267
162734118.xls.ms_office1
dBm
The value of this parameter must be larger than [PARA]Inte rRatCsThd2 DRscp[/PA RA].
Not involved
Not involved
8/7/2013
15773267
162734118.xls.ms_office1
None
80
80
RNC
This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to EVENT_T RIGGER.
Not involved
Not involved
8/7/2013
15783267
162734118.xls.ms_office1
None
D3(ADD CELLMBD RINTERRA T,ADD CELLINTE RRATHON COV,ADD CELLINTE D3 RRATHOC OV) -(SET INTERRAT HONCOV, SET INTERRAT HOCOV)
Cell(ADD CELLMBD RINTERRA T,ADD CELLINTE RRATHON COV,ADD CELLINTE None RRATHOC OV) RNC(SET INTERRAT HONCOV, SET INTERRAT HOCOV)
Not involved
Not involved
8/7/2013
15793267
162734118.xls.ms_office1
None
Not involved
Not involved
None
YES
RNC
Not involved
Not involved
8/7/2013
15803267
162734118.xls.ms_office1
dBm
21
21
RNC
None
Not involved
Not involved
None
DRD
RNC
This parameter is Valid when [PARA]Em ergLCSSwit ch[/PARA] is set to ON and [PARA]Inte rRatHOPer mit[/PARA] is set to YES.
Not involved
Not involved
8/7/2013
15813267
162734118.xls.ms_office1
dB
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]; Also the value of this parameter must be smaller than [PARA]Inte rRatHThd2 FEcN0[/PA RA].
Not involved
Not involved
8/7/2013
15823267
162734118.xls.ms_office1
dBm
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]; Also the value of this parameter must be smaller than [PARA]Inte rRatHThd2 FRscp[/PA RA].
Not involved
Not involved
8/7/2013
15833267
162734118.xls.ms_office1
dB
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]; Also the value of this parameter must be larger than [PARA]Inte rRatHThd2 DEcN0[/PA RA].
Not involved
Not involved
8/7/2013
15843267
162734118.xls.ms_office1
dBm
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]; Also the value of this parameter must be larger than [PARA]Inte rRatHThd2 DRscp[/PA RA].
Not involved
Not involved
8/7/2013
15853267
162734118.xls.ms_office1
60(ADD CELLINTE RRATHON COV,ADD CELLINTE RRATHOC OV) -(SET INTERRAT HONCOV, SET INTERRAT HOCOV) 3(ADD CELLMBD RINTERRA T)
60(SET INTERRAT HONCOV, ADD CELLINTE RRATHON COV,SET INTERRAT HOCOV,A DD CELLINTE RRATHOC OV) 3(ADD CELLMBD RINTERRA T)
Cell(ADD CELLMBD RINTERRA T,ADD CELLINTE RRATHON COV,ADD CELLINTE None RRATHOC OV) RNC(SET INTERRAT HONCOV, SET INTERRAT HOCOV)
Not involved
Not involved
None
OFF
Not involved
Not involved
8/7/2013
15863267
162734118.xls.ms_office1
dBm
Not involved
Not involved
8/7/2013
15873267
162734118.xls.ms_office1
dBm
Not involved
Not involved
8/7/2013
15883267
162734118.xls.ms_office1
ms
D1000(AD D CELLMBD RINTERRA T,ADD D1000 CELLINTE RRATHOC OV) -(SET INTERRAT HOCOV)
Cell(ADD CELLMBD RINTERRA T,ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)
This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to PERIODIC AL_REPO RTING.
Not involved
Not involved
None
3(ADD CELLINTE RRATHON COV,ADD CELLINTE RRATHOC OV) 3 -(SET INTERRAT HONCOV, SET INTERRAT HOCOV)
Cell(ADD CELLINTE RRATHON COV,ADD CELLINTE RRATHOC OV) None RNC(SET INTERRAT HONCOV, SET INTERRAT HOCOV)
Not involved
Not involved
8/7/2013
15893267
162734118.xls.ms_office1
dBm
Not involved
Not involved
8/7/2013
15903267
162734118.xls.ms_office1
Not involved
Not involved
8/7/2013
15913267
162734118.xls.ms_office1
dB
The value of this parameter must be smaller than [PARA]Inte rRatR99PsT hd2FEcN0[/ PARA].
Not involved
Not involved
8/7/2013
15923267
162734118.xls.ms_office1
dBm
The value of this parameter must be smaller than [PARA]Inte rRatR99PsT hd2FRscp[/ PARA].
Not involved
Not involved
8/7/2013
15933267
162734118.xls.ms_office1
dB
The value of this parameter must be larger than [PARA]Inte rRatR99PsT hd2DEcN0[ /PARA].
Not involved
Not involved
8/7/2013
15943267
162734118.xls.ms_office1
dBm
The value of this parameter must be larger than [PARA]Inte rRatR99PsT hd2DRscp[/ PARA].
Not involved
Not involved
8/7/2013
15953267
162734118.xls.ms_office1
None
Cell(ADD CELLMBD RINTERRA T,ADD CELLINTE None RRATHOC OV) RNC(SET EVENT_T EVENT_T INTERRAT RIGGER(A RIGGER(A HOCOV) DD DD CELLMBD CELLMBD RINTERRA RINTERRA T) T)
Not involved
Not involved
None
255
255
Cell
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
15963267
162734118.xls.ms_office1
None
80
80
RNC
This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to EVENT_T RIGGER.
Not involved
Not involved
RNC
None
Port
8/7/2013
15973267
162734118.xls.ms_office1
dB
This parameter is valid when [PARA]Intr aFreqMeas Quantity[/P ARA] is set to CPICH_EC/ NO.
Not involved
Not involved
8/7/2013
15983267
162734118.xls.ms_office1
dBm
This parameter is valid when [PARA]Intr aFreqMeas Quantity[/P ARA] is set to CPICH_RS CP.
Not involved
Not involved
8/7/2013
15993267
162734118.xls.ms_office1
None
D3
D3
Cell
None
Not involved
Not involved
8/7/2013
16003267
162734118.xls.ms_office1
When [PARA]Cho iceRprtUnit ForDlBasic Meas[/PAR A] is set to MIN,the value of this parameter must satisfy the following relationship: [PARA]Intr aFreqLdbPe riodTimerL en[/PARA] > 2 x 60 x [PARA]Mi nForDlBasi cMeas[/PA RA]; When [PARA]Cho iceRprtUnit ForDlBasic Meas[/PAR A] is set to TEN_MSE C,the value of this parameter
1800
RNC
Not involved
Not involved
8/7/2013
16013267
162734118.xls.ms_office1
None
REQUIRE
REQUIRE
Cell
None
Not involved
Not involved
8/7/2013
16023267
162734118.xls.ms_office1
None
CPICH_EC/ Cell(ADD NO(ADD CELLINTR CELLINTR AFREQHO CPICH_EC/ AFREQHO ) None NO ) RNC(SET -(SET INTRAFRE INTRAFRE QHO) QHO)
Not involved
Not involved
None
OFF
Not involved
Not involved
8/7/2013
16033267
162734118.xls.ms_office1
dB
12
RNC
Not involved
Not involved
dB
The value of this parameter must satisfy the following relationship: ([PARA]Int raRelThdFo r1ACSNVP [/PARA] [PARA]Hys tfor1A[/PA RA] / 2) < ([PARA]Int raRelThdFo r1BCSNVP [/PARA] + [PARA]Hys tfor1B[/PA RA] / 2).
Not involved
Not involved
8/7/2013
16043267
162734118.xls.ms_office1
dB
The value of this parameter must satisfy the following relationship: ([PARA]Int raRelThdFo r1ACSVP[/ PARA] [PARA]Hys tfor1A[/PA RA] / 2) < ([PARA]Int raRelThdFo r1BCSVP[/ PARA] + [PARA]Hys tfor1B[/PA RA] / 2).
Not involved
Not involved
8/7/2013
16053267
162734118.xls.ms_office1
dB
The value of this parameter must satisfy the following relationship: ([PARA]Int raRelThdFo r1APS[/PA RA] [PARA]Hys tfor1A[/PA RA] / 2) < ([PARA]Int raRelThdFo r1BPS[/PA RA] + [PARA]Hys tfor1B[/PA RA] / 2).
Not involved
Not involved
dB
18
RNC
Not involved
Not involved
8/7/2013
16063267
162734118.xls.ms_office1
dB
The value of this parameter must satisfy the following relationship: ([PARA]Int raRelThdFo r1ACSNVP [/PARA] [PARA]Hys tfor1A[/PA RA] / 2) < ([PARA]Int raRelThdFo r1BCSNVP [/PARA] + [PARA]Hys tfor1B[/PA RA] / 2).
Not involved
Not involved
8/7/2013
16073267
162734118.xls.ms_office1
dB
The value of this parameter must satisfy the following relationship: ([PARA]Int raRelThdFo r1ACSVP[/ PARA] [PARA]Hys tfor1A[/PA RA] / 2) < ([PARA]Int raRelThdFo r1BCSVP[/ PARA] + [PARA]Hys tfor1B[/PA RA] / 2).
Not involved
Not involved
8/7/2013
16083267
162734118.xls.ms_office1
dB
The value of this parameter must satisfy the following relationship: ([PARA]Int raRelThdFo r1APS[/PA RA] [PARA]Hys tfor1A[/PA RA] / 2) < ([PARA]Int raRelThdFo r1BPS[/PA RA] + [PARA]Hys tfor1B[/PA RA] / 2).
Not involved
Not involved
ms
60000
RNC
None
Not involved
Not involved
The parameter value of IntrTmr must be greater than the value of [PARA]Igor Tmr[/PARA ] set in [MML]SET IUTIMERA NDNUM[/ MML].The parameter modificatio n has no impact on the equipment.
8/7/2013
16093267
162734118.xls.ms_office1
When the value of [PARA]LN KT[/PARA] in [MML]LOP VCL[/MML ] is set to IPOAPVC,t he value of [PARA]IPA DDR[/PAR A] should be set. In [MML]AD D IPOAPVC[/ MML] The local [IP address] and the [Peer IP address] must be in the same network segment. When the value of [PARA]LN KT[/PARA] in [MML]AC T VCLCC[/M ML] is set to IPOAPVC, the IP address should be None
None
None
IPOA
Not involved
None
None
Ethernet port(ADD ETHTRKIP ,ADD ETHIP) RNC(ADD IPOAPVC, ADD DEVIP) Global(AC T VCLCC)
Not involved
Not involved
Not involved
None
None
RNC
Not involved
Not involved
Not involved
8/7/2013
16103267
162734118.xls.ms_office1
The [PARA]IPA DDR[/PAR A] in [MML]AD D IPPATH[/ MML] can not be at one network segment with the peer IP address of SCTPLNK or IPPATH Not whose local involved IP address is device IP address of FG2a/GOU a in this subrack;[PA RA]IPADD R[/PARA] and [PARA]PE ERIPADDR [/PARA] in [MML]AD D IPPATH[/
None
None
IP Path
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
This parameter must be the same with the local and peer device.
8/7/2013
16113267
162734118.xls.ms_office1
When this parameter is set to No_HC, you can disable the header compress function; when this parameter is set to RTP/UDP/I P_HC, you can enable the RTP/UDP/I P/PPP header compress function. This parameter cannot be modified.
None
Not involved
Not involved
None
None
Ethernet port
None
Not involved
Not involved
Not involved
8/7/2013
16123267
162734118.xls.ms_office1
If the transport type of the NodeB is IUB-ATM, the next hop IP address must be the peer IP address of the configured IPoA PVC. If the transport type of the NodeB is IUB-IP, the next hop IP address must be one of the following configured addresses: PPP link peer IP address, MLPPP group peer IP address, and the IP
None
None
RNC
When the value of [PARA]IPL OGPORTF LAG[/PAR A] in [MML]AD D NODEBIP[/ MML] is set to YES, the IPLPN should be set.
Not involved
Not involved
8/7/2013
16133267
162734118.xls.ms_office1
If the transport type of the NodeB is IUB-IP, the next hop IP address must be one of the following configured addresses: PPP link peer IP address, MLPPP group peer IP address, and the IP address in the same network segment as that of the FE/GE port. The IP address of the NodeB cannot be the one already configured for other NodeBs. It cannot be the same as the IP address already configured in the RNC. If the IP address of the NodeB is incorrect, the OM channel will be unavailable.
None
None
RNC
When the value of [PARA]IPL OGPORTF LAG[/PAR A] in [MML]AD D NODEBIP[/ MML] is set to YES, this parameter should be set.
Not involved
Not involved
None
None
RNC
When the value of [PARA]NB TRANTP[/ PARA] in [MML]AD D NODEBIP[/ MML] is set to IPTRANS_I P or ATMANDI PTRANS_I P, this parameter should be set.
Not involved
Not involved
8/7/2013
16143267
162734118.xls.ms_office1
The IP address of the NodeB cannot be the one already configured for other NodeBs. It cannot be the same as the IP address already configured in the RNC. If the IP address of the NodeB is incorrect, the OM channel will be unavailable.
None
None
RNC
When the value of [PARA]NB TRANTP[/ PARA] in [MML]AD D NODEBIP[/ MML] is set to IPTRANS_I P or ATMANDI PTRANS_I P, this parameter should be set.
Not involved
Not involved
None
None
NodeB
The parameter should be configured when [PARA]Tnl BearerType [/PARA] is modified from ATM to IP or dual stack ATM/IP.
Not involved
Not involved
8/7/2013
16153267
162734118.xls.ms_office1
When the value of [PARA]IPT YPE[/PAR A] in [MML]AD D ETHIP[/M ML] is set to SECOND, the IP address index should be set. Not When the involved value of [PARA]IPT YPE[/PAR A] in [MML]AD D ETHTRKIP [/MML] is set to SECOND, the IP address index should be set.
None
None
Ethernet port
Not involved
Not involved
None
None
Not involved
Not involved
8/7/2013
16163267
162734118.xls.ms_office1
None
None
Not involved
Not involved
None
None
Not involved
Not involved
None
None
Not involved
Not involved
8/7/2013
16173267
162734118.xls.ms_office1
None
None
Not involved
Not involved
None
None
Not involved
Not involved
None
None
Not involved
Not involved
8/7/2013
16183267
162734118.xls.ms_office1
None
None
Not involved
Not involved
None
None
Not involved
Not involved
None
None
Not involved
Not involved
8/7/2013
16193267
162734118.xls.ms_office1
None
None
Not involved
Not involved
None
None
Not involved
Not involved
None
None
Not involved
Not involved
8/7/2013
16203267
162734118.xls.ms_office1
None
None
Not involved
Not involved
None
None
Not involved
Not involved
None
None
Not involved
Not involved
8/7/2013
16213267
162734118.xls.ms_office1
None
NO
NO
Ethernet port
None
Not involved
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
None
FALSE
FALSE
NodeB
None.
Not involved
Not involved
None
YES
YES
RNC
None
Not involved
Not involved
Not involved
None
None
IP path
When the value of [PARA]ISQ OSPATH[/ PARA] in [MML]AC Not involved T IPPM[/MM L] is selected as YES, the PHB should
Not involved
Not involved
8/7/2013
16223267
162734118.xls.ms_office1
When the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to IUB, IUR, or IUCS, and Not the value of involved [PARA]TR ANST[/PA RA] in [MML]AD D ADJNODE[ /MML] is set to ATM or ATM_IP, this parameter is valid.
None
None
Adjacent Node
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
8/7/2013
16233267
162734118.xls.ms_office1
RNC
None
Not involved
Not involved
None
NodeB
None
Not involved
Not involved
None
NodeB
None
Not involved
Not involved
300
RNC
None
Not involved
Not involved
300
RNC
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
8/7/2013
16243267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.
None
OFF
OFF
RNC
None
Not involved
Not involved
None
TRUE
RNC
None
Not involved
Not involved
None
OFF
OFF
RNC
None
Not involved
Not involved
None
OFF
OFF
RNC
None
Not involved
Not involved
None
None
RAB
None
Not involved
Not involved
Not involved
8/7/2013
16253267
162734118.xls.ms_office1
None
None
Not involved
Not involved
None
16 byte
Port
The settings of the local end and the peer end should be consistent.
8/7/2013
16263267
162734118.xls.ms_office1
When the value of [PARA]J0R XT[/PARA] in [MML]SET Correspondi OPT[/MML ng optical ] is set to 1 Y port byte, 16 byte, or 64 byte, the J0 hope incept value should be set.
None
SBS 155
Port
The settings of the local end and the peer end should be consistent.
None
16 byte
Port
The settings of the local end and the peer end should be consistent.
None
SBS 155
When the value of [PARA]J0T XT[/PARA] in [MML]SET Correspondi OPT[/MML ng optical ] is set to 1 Y port byte, 16 byte, or 64 byte, the J0 transmit value should be set.
Port
The settings of the local end and the peer end should be consistent.
None
16 byte
Port
The settings of the local end and the peer end should be consistent.
8/7/2013
16273267
162734118.xls.ms_office1
When the value of [PARA]J1R XT[/PARA] in [MML]SET Correspondi OPT[/MML ng optical ] is set to 1 Y port byte, 16 byte, or 64 byte, the J1 hope incept value should be set.
None
SBS 155
Port
The settings of the local end and the peer end should be consistent.
None
16 byte
Port
The settings of the local end and the peer end should be consistent.
None
SBS 155
When the value of [PARA]J1T XT[/PARA] in [MML]SET Correspondi OPT[/MML ng optical ] is set to 1 Y port byte, 16 byte, or 64 byte, the J1 transmit value should be set.
Port
The settings of the local end and the peer end should be consistent.
8/7/2013
16283267
162734118.xls.ms_office1
1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnect ed with the equipment of other vendors. 1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnect ed with the equipment of other vendors. 1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnect ed with the equipment of other vendors.
None
None
Not involved
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
8/7/2013
16293267
162734118.xls.ms_office1
1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnect ed with the equipment of other vendors. The value of this parameter should be consistent with the peer one. Modifying this parameter may affect the sensitivity of SAAL link detection. In order to modify this parameter, you must use the command [MML]STP IPCHK[/M ML] first and [MML]STR IPCHK[/M ML] next. The parameter modificatio n has no impact on the equipment.
None
None
Not involved
Not involved
Not involved
None
None
Port
None
Not involved
Not involved
Not involved
ms
SAAL
None
Not involved
Not involved
None
None
Ethernet port
When the value of [PARA]MO DE[/PARA] in [MML]STR IPCHK[/M Not ML] is set involved to PRIMARY, the KEYCHK should be set. N (No impact on the UE in idle mode)
Not involved
Not involved
None
D6
RNC
None
Not involved
Not involved
8/7/2013
16303267
162734118.xls.ms_office1
None
ON
RNC
None
Not involved
Not involved
None
None
RNC(ADD LASNAMA P,ADD CZ,ADD NRNCCEL L,ADD SAC,ADD QUICKCE LLSETUP, ADD CELLSETU P,ADD RAC,ADD LAC) Cell(ADD GSMCELL)
The value of this parameter is dependent on the value of Not [PARA]LA involved C[/PARA] in [MML]AD D SAC[/MML ].
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
8/7/2013
16313267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
ms
LGC port
None
LGC port
ms
25
25
LGC port
When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set. When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set. When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
8/7/2013
16323267
162734118.xls.ms_office1
When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set. When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set.
None
LGC port
Not involved
Not involved
None
LGC port
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
This parameter cannot be modified. The parameter modificatio n has no impact on the equipment.
None
32
RNC
None
Not involved
Not involved
8/7/2013
16333267
162734118.xls.ms_office1
None
None. If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] -(SET commands, DRD) RNC(SET the UserNumbe DRD) parameter UserNumbe r Cell(ADD set through r(ADD CELLDRD) the CELLDRD) [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command.
Not involved
Not involved
8/7/2013
16343267
162734118.xls.ms_office1
This parameter is valid only when the [PARA]Ldb DRDSwitch DCH[/PAR A] parameter is set to ON. If this parameter is set through both the RNC(SET [MML]AD DRD) D Cell(ADD CELLDRD[ CELLDRD) /MML] and [MML]SET DRD[/MM L] commands, the parameter set through the [MML]AD D CELLDRD[ /MML] command takes
per cent
Not involved
Not involved
8/7/2013
16353267
162734118.xls.ms_office1
This parameter is valid only when the [PARA]Ldb DRDSwitch HSDPA[/P ARA] parameter is set to ON. If this parameter is set through both the RNC(SET [MML]AD DRD) D Cell(ADD CELLDRD[ CELLDRD) /MML] and [MML]SET DRD[/MM L] commands, the parameter set through the [MML]AD D CELLDRD[ /MML] command takes
per cent
Not involved
Not involved
8/7/2013
16363267
162734118.xls.ms_office1
per cent
10
RNC
This parameter is valid only when the [PARA]Ldb DRDLoadR emainThdD CH[/PARA ] parameter is set to ON.
Not involved
Not involved
8/7/2013
16373267
162734118.xls.ms_office1
per cent
10
RNC
This parameter is valid only when the [PARA]Ldb DRDSwitch HSDPA[/P ARA] parameter is set to ON.
Not involved
Not involved
8/7/2013
16383267
162734118.xls.ms_office1
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the RNC(SET parameter DRD) set through Cell(ADD the CELLDRD) [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command.
None
Not involved
Not involved
8/7/2013
16393267
162734118.xls.ms_office1
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the RNC(SET parameter DRD) set through Cell(ADD the CELLDRD) [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command.
None
Not involved
Not involved
per cent
30
RNC
This parameter is valid only when the [PARA]Ldb DRDchoice [/PARA] parameter is set to POWER.
Not involved
Not involved
8/7/2013
16403267
162734118.xls.ms_office1
None
NODEB_C REDIT_LD R_SWITCH :disabled. LCG_CRE DIT_LDR_ RNC SWITCH:di sabled. LC_CREDI T_LDR_S WITCH:dis abled.
None
Not involved
Not involved
None
FALSE
FALSE
Cell
None
Not involved
Not involved
8/7/2013
16413267
162734118.xls.ms_office1
per cent
13
13
Cell
None
Not involved
Not involved
8/7/2013
16423267
162734118.xls.ms_office1
None
IUBLDR
RNC
[PARA]Ldr FirstPri[/PA RA],[PARA ]LdrSecond Pri[/PARA] ,[PARA]Ld rThirdPri[/P ARA],[PAR A]LdrFourt hPri[/PARA ]are different between each other.
Not involved
Not involved
8/7/2013
16433267
162734118.xls.ms_office1
None
UULDR
RNC
[PARA]Ldr FirstPri[/PA RA],[PARA ]LdrSecond Pri[/PARA] ,[PARA]Ld rThirdPri[/P ARA],[PAR A]LdrFourt hPri[/PARA ]are different between each other.
Not involved
Not involved
8/7/2013
16443267
162734118.xls.ms_office1
When [PARA]Cho iceRprtUnit ForUlBasic Meas[/PAR A] and [PARA]Cho iceRprtUnit ForDlBasic Meas[/PAR A] are set to MIN,the value of this parameter must satisfy the following relationship: [PARA]Ldr PeriodTime rLen[/PAR A] > 2 x 60 x [PARA]Mi nForUlBasi cMeas[/PA RA]; [PARA]Ldr PeriodTime rLen[/PAR A] > 2 x 60 x
10
RNC
Not involved
Not involved
8/7/2013
16453267
162734118.xls.ms_office1
None
CREDITLD RNC R
[PARA]Ldr FirstPri[/PA RA],[PARA ]LdrSecond Pri[/PARA] ,[PARA]Ld rThirdPri[/P ARA],[PAR A]LdrFourt hPri[/PARA ]are different between each other.
Not involved
Not involved
8/7/2013
16463267
162734118.xls.ms_office1
None
CODELDR RNC
[PARA]Ldr FirstPri[/PA RA],[PARA ]LdrSecond Pri[/PARA] ,[PARA]Ld rThirdPri[/P ARA],[PAR A]LdrFourt hPri[/PARA ]are different between each other.
Not involved
Not involved
None
None
RNC
1.The parameter is used in command [MML]AD D ADJMAP [/MML] as loadeq table index for gold,silver,a Not nd bronze involved users. 2.When TRANST of ADJNODE is dual stack or hybird IP,loadeq can be added.
Not involved
Not involved
8/7/2013
16473267
162734118.xls.ms_office1
The load EQ table index is configured by setting Adjacent the value of Node [PARA]LEI [/PARA] in [MML]AD D LOADEQ[/ MML]. The load EQ table index is configured by setting Adjacent the value of Node [PARA]LEI [/PARA] in [MML]AD D LOADEQ[/ MML]. The load EQ table index is configured by setting Adjacent the value of Node [PARA]LEI [/PARA] in [MML]AD D LOADEQ[/ MML]. This is a parameter in [MML]AD D OPC[/MML RNC(ADD ]. M3LE) The [PARA]LE M3UA(AD NO[/PARA D M3DE) ] field in [MML]AD D M3LE[/MM L]
None
None
Not involved
Not involved
None
None
Not involved
Not involved
None
None
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
8/7/2013
16483267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.
None
ON
RNC
None
Not involved
Not involved
Not involved
None
Ethernet port
None
Not involved
Not involved
Not involved
None
None
RNC
When the value of [PARA]LC ARRYT[/P ARA] in [MML]AD D Not VPCLCX[/ involved MML] is set to FRAATM, this parameter should be set.
Not involved
Not involved
8/7/2013
16493267
162734118.xls.ms_office1
When the value of [PARA]OT [/PARA] in [MML]AC T PACH[/M ML] is set to Step_by_Ste p and the value of [PARA]BT[ /PARA] is set to SPUa, DPUb, PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, the Logic function type is
None
None
RNC
Not involved
None
None
Board
None
Not involved
Not involved
Not involved
None
None
Board
None
Not involved
Not involved
Not involved
8/7/2013
16503267
162734118.xls.ms_office1
None
None
RNC
When the value of [PARA]LC ARRYT[/P ARA] in [MML]AD Not D involved VPCLCX[/ MML] is set to IMA, this parameter should be set.
Not involved
Not involved
None
D8
RNC
This paramter is valid only when [PARA]DlS FLimitCMI nd[/PARA] is set to TRUE.
Not involved
Not involved
8/7/2013
16513267
162734118.xls.ms_office1
kbit/s
D64
RNC
The low activity rate adjustment function is invalid when [PARA]Litt leRateThd[/ PARA]>=[ PARA]UlD cccRateThd [/PARA] and [PARA]Litt leRateThd[/ PARA]>=[ PARA]DlD cccRateThd [/PARA].
Not involved
Not involved
None
None
SRB
None
Not involved
Not involved
Not involved
8/7/2013
16523267
162734118.xls.ms_office1
When the value of [PARA]LN KT[/PARA] in [MML]SET E1T1[/MM L] is set to E1_DOUB LE_FRAM E or E1_CRC4_ MULTI_FR AME, the value range of Not [PARA]LN involved KCODE[/P ARA] is HDB3 or AMI. When the value of [PARA]LN KT[/PARA] in [MML]SET E1T1[/MM L] is set to T1_SUPER _FRAME or T1_EXTEN DED_SUPE
None
None
E1T1 link
Not involved
Not involved
The line code should be consistent with the interconnect ed one.HDB3( HDB3 coding) and AMI(AMI coding)is used in E1 link. B8ZS(B8ZS coding) and AMI_ZCS( AMI coding)is used in T1 link.
8/7/2013
16533267
162734118.xls.ms_office1
When the value of [PARA]BT[ /PARA] in [MML]SET E1T1LOP[/ MML] is set to AEUa or PEUa, the E1/T1 link number link(SET should be E1T1LOP) set and the Cell(LOP value range E1T1) is from 0 to E1T1 31. Link(STR When the E1T1TST) value of E1T1 [PARA]BT[ link(SET /PARA] in E1T1) [MML]SET Optical E1T1LOP[/ Port(SET MML] is set COPTLNK) to AOUa or POUa, the link number should be set and the value range is from 0 to 167. When the value of
None
None
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
8/7/2013
16543267
162734118.xls.ms_office1
None
B1111
B1111
RNC
None
Not involved
Not involved
Not involved
The link selection mask should be properly set according to MTP3 load sharing. If it is not properly set, the MTP3 links cannot share load with each other.
8/7/2013
16553267
162734118.xls.ms_office1
When the value of [PARA]LS[ /PARA] in [MML]SET E1T1[/MM L] is set to SINGLE,the value range of [PARA]LN KT[/PARA] is E1_DOUB LE_FRAM E,E1_CRC4 Not _MULTI_F involved RAME,T1_ SUPER_FR AME,T1_E XTENDED _SUPER_F RAME. When the value of [PARA]LS[ /PARA] in [MML]SET E1T1[/MM L] is set to ALL,the value range
None
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
None
None
RNC
The parameter must not be the same as Not any IP involved address that has been configured in the RNC.
Not involved
Not involved
8/7/2013
16563267
162734118.xls.ms_office1
None
None
None
Not involved
Not involved
The local IP address and the peer IP address must be in the same network segment, and the peer IP address cannot be the same as the local IP address in the RNC. This parameter cannot be modified.
None
None
Ethernet port
None
Not involved
Not involved
Not involved
None
None
NodeB
None
Cell
None
None
SCTP
None
The addresses of both ends of the SCTP The are the services are parameters interrupted that should until the be SCTP link negotiated is working with the normally. peer end before modificatio n.
8/7/2013
16573267
162734118.xls.ms_office1
None
None
SCTP
None
The addresses of both ends of the SCTP The are the services are parameters interrupted that should until the be SCTP link negotiated is working with the normally. peer end before modificatio n. The SCTP port number is the The parameter services are that should interrupted be until the negotiated SCTP link with the is working peer end normally. before modificatio n. The parameter modificatio n has no impact on the equipment.
None
None
SCTP
When the value of [PARA]MO DE[/PARA] in [MML]AD D Y SCTPLNK[ /MML] is set to Client, this parameter can be modified.
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
SCTP
This parameter determines whether [PARA]LO GPORTSN[ /PARA] and [PARA]LO Y GPORTNO [/PARA] in [MML]AD D SCTPLNK[ /MML] are valid.
The services are interrupted until the SCTP link is working normally.
8/7/2013
16583267
162734118.xls.ms_office1
When the value of [PARA]LO GPORTFL AG[/PARA ] in [MML]AD Y D SCTPLNK[ /MML] is set to ON, this parameter is valid. When the value of [PARA]LO GPORTFL AG[/PARA ] in [MML]AD Y D SCTPLNK[ /MML] is set to ON, this parameter is valid.
None
None
SCTP
The services are interrupted until the SCTP link is working normally.
None
None
SCTP
The services are interrupted until the SCTP link is working normally.
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
8/7/2013
16593267
162734118.xls.ms_office1
If the parameter is set to REMOTE_ LOOP or LOCAL_L OOP, the services on this link may be interrupted until the link The loopback is loopback cancelled. keeps If the uplink interrupting is beared by the services IMAGRP, until it is the cancelled. IMAGRP must be reset after the loopmode is cancelled. Otherwise, the IMAGRP will be destroied, and cannot bear new
None
None
None
None
LGC port
When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set.
Not involved
Not involved
8/7/2013
16603267
162734118.xls.ms_office1
None
None
RNC
When the value of [PARA]LC ARRYT[/P ARA] in [MML]AD D Not VPCLCX[/ involved MML] is set to NCOPT, this parameter should be set.
Not involved
Not involved
None
None
When the value of [PARA]CA RRYFLAG[ LGC /PARA] in port(ADD [MML]AD IPLOGICP Not D ORT) IPPATH[/ involved IP MML] is set Path(ADD to IP IPPATH) LGCPORT, this parameter is valid.
Not involved
Not involved
None
None
LGC port
None
Not involved
8/7/2013
16613267
162734118.xls.ms_office1
When the value of [PARA]CA RRYFLAG[ /PARA] in [MML]AD D Y IPPATH[/ MML] is set to IP LGCPORT, this parameter is valid.
None
None
IP Path
IP Path
None
None
LGC port
None
Not involved
None
ALL
E1T1 link
None
Not involved
Not involved
Not involved
None
ALL
Not involved
Not involved
Not involved
If a link is used, you cannot convert the link from E1 to T1, or from T1 to E1. 1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnect ed with the equipment of other vendors.
8/7/2013
16623267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
RNC
When the value of [PARA]LC ARRYT[/P ARA] in [MML]AD Not D involved VPCLCX[/ MML] is set to UNI, this parameter should be set.
Not involved
Not involved
None
None
RNC
When the value of [PARA]CX T[/PARA] in [MML]AD D Not VPCLCX[/ involved MML] is set to VCLCX, this parameter should be set.
Not involved
Not involved
8/7/2013
16633267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
None
2905
The SCTP links of all the subracks, which work None as the server and whose upper layer is M3UA
The SCTP link works as the server and the upper-layer application is M3UA signaling service.
The parameter modificatio n should be negotiated with the peer end, The and after services are modificatio interrupted n, the RNC until the should be SCTP link reset. It is is working recommend normally. ed that this parameter should not be modified when the system is running.
None
RNC
None
Not involved
Not involved
None
None
RNC
Not involved
Not involved
8/7/2013
16643267
162734118.xls.ms_office1
None
None
RNC
Not involved
Not involved
byte
None
RNC
None
Not involved
Not involved
byte
None
RNC
None
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
8/7/2013
16653267
162734118.xls.ms_office1
When [PARA]CA RRYLNKT [/PARA] is Not involved SAALSCTP, this parameter is valid. None Not involved
None
SAAL
SAAL
NodeB
Not involved
Not involved
None
None
Ethernet port
Not involved
Not involved
None
MAP_HSU PA_TTI_2 MS_SWIT CH:OFF, MAP_INTE R_RAT_PS _IN_CHAN LE_LIMIT_ SWITCH:O FF, MAP_PS_B E_ON_E_F ACH_SWI TCH:OFF, MAP_PS_S TREAM_O RNC N_E_FACH _SWITCH: OFF, MAP_PS_S TREAM_O N_HSDPA_ SWITCH:O FF, MAP_PS_S TREAM_O N_HSUPA_ SWITCH:O FF, MAP_SRB _6800_WH EN_RAB_
None
Not involved
Not involved
8/7/2013
16663267
162734118.xls.ms_office1
None
None
UE
MASK needs to be set when [PARA]CO NTEXTTY PE[/PARA] in [MML]RST IUR[/MML ] is set to Context_Gr oup; MASK Not does not involved need to be set when [PARA]CO NTEXTTY PE[/PARA] in [MML]RST IUR[/MML ] is set to Context or All_Context s. Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
PPP Link
None
Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
Not involved
Not involved
This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.
None
None
None
Not involved
Not involved
None
None
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
Ethernet port
None
Not involved
Not involved
8/7/2013
16673267
162734118.xls.ms_office1
dBm
This parameter is valid only when [PARA]Ma xAllowedUl TxPowerInd [/PARA] is set to TRUE.
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
None
FALSE
FALSE
RNC
None
Not involved
Not involved
None
Cell
Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_AN TENNA
Not involved
Not involved
None
Cell
Not involved
Not involved
8/7/2013
16683267
162734118.xls.ms_office1
None
10
When the application type is NBAP, the recommend ed value is 10; when SCTP the application type is M3UA, the recommend ed value is 4.
The value to be set should be larger than the value of [PARA]MA XPATHRE TR[/PARA] in [MML]AD D SCTPLNK[ /MML].
Not involved
Not involved
None
Cell
None
Not involved
Not involved
8/7/2013
16693267
162734118.xls.ms_office1
None
RNC
None
Not involved
Not involved
bit/s
None
RAB
None.
Not involved
Not involved
kbit/s
None
LGC port
1.When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set. 2.[PARA]M INBW[/PA RA] must be less than [PARA]MA XBW[/PAR A].
Not involved
Not involved
8/7/2013
16703267
162734118.xls.ms_office1
None
150
RNC
The value of this parameter must satisfy the following relationship: [PARA]Ma xCAPSLow Load[/PAR A] > [PARA]Ma xCAPSMid Load[/PAR A] > [PARA]Sha ringOutCA PSMidLoad [/PARA].
Not involved
Not involved
None
100
RNC
The value of this parameter must satisfy the following relationship: [PARA]Ma xCAPSLow Load[/PAR A] > [PARA]Ma xCAPSMid Load[/PAR A] > [PARA]Sha ringOutCA PSMidLoad [/PARA].
Not involved
Not involved
None
SAAL
None
Not involved
Not involved
8/7/2013
16713267
162734118.xls.ms_office1
None
Not involved
Not involved
None
D15
D15
Transport channel
None
Not involved
Not involved
Not involved
dB
49
RNC
None
Not involved
Not involved
8/7/2013
16723267
162734118.xls.ms_office1
None
RNC
The value of this parameter must not larger than [PARA]Ma xCellInActi veSet[/PAR A] of [MML]SET INTRAFRE QHO[/MM L] or [MML]AD D CELLINTR AFREQHO [/MML].
Not involved
Not involved
None
None
RAB
This parameter is required when the [PARA]Trc hType[/PA RA] parameter is set to TRCH_ED CH_2MS or TRCH_ED CH_10MS.
Not involved
Not involved
None
48
48
Cell
None
Not involved
Not involved
8/7/2013
16733267
162734118.xls.ms_office1
dB
10
10
Transport channel
None
Not involved
Not involved
byte
1031
1031
IP Path
When the value of [PARA]FP MUXSWIT CH[/PARA ] in [MML]AD D IPPATH[/ MML] is set to YES,this parameter is valid.
Not involved
Not involved
None
16
RNC
None
Not involved
Not involved
8/7/2013
16743267
162734118.xls.ms_office1
None
64
64
Cell
None
Not involved
Not involved
None
20
20
Cell
None
Not involved
Not involved
8/7/2013
16753267
162734118.xls.ms_office1
None
RNC
None
Not involved
Not involved
byte
[PARA]MA XMFLEN[/ PARA] must not be less than [PARA]MA XSFLEN[/P ARA]*2+8. PPP When the Link(ADD 256(ADD value of PPPLNK) PPPLNK) [PARA]PP MLPPP Y None(ADD PMUX[/PA Group, PPP MPGRP) RA] in Link(ADD [MML]AD MPGRP) D MPGRP[/M ML] is set to ENABLE, this parameter should be set.
PPP link
8/7/2013
16763267
162734118.xls.ms_office1
None
NodeB
None.
Not involved
Not involved
None
SAAL
When the value of [PARA]SA ALLNKT[/ PARA] is set to NNI, this parameter is
Not involved
Not involved
None
When the application type is NBAP, the recommend ed value is 5; when the SCTP application type is M3UA, the recommend ed value is 2.
The value to be set should be smaller than the value of [PARA]MA XASSOCR ETR[/PAR A] in [MML]AD D SCTPLNK[ /MML].
Not involved
Not involved
8/7/2013
16773267
162734118.xls.ms_office1
dBm
346
346
Cell
None
Not involved
Not involved
None
SAAL
None
Not involved
Not involved
RNC
The value of this parameter must be set to meet the following conditions: 100 x [PARA]Ma xQueueTim eLen[/PAR A] > [PARA]Poll TimerLen[/ PARA].
Not involved
Not involved
8/7/2013
16783267
162734118.xls.ms_office1
byte
[PARA]MA XMFLEN[/ PARA] must not be less than [PARA]MA XSFLEN[/P ARA]*2+8. 1.When the value of [PARA]PP PMUX[/PA PPP RA] in Link(ADD 64(ADD [MML]AD PPPLNK) PPPLNK) D MPGRP, Y None(ADD MPGRP[/M PPPLNK(A MPGRP) ML] is set DD to MPGRP) ENABLE, this parameter should be set. 2.[PARA]M AXMFLEN [/PARA] must not be less than [PARA]MA XSFLEN[/P ARA]*2+8.
PPP link
per cent
75
75
Cell
None
Not involved
Not involved
8/7/2013
16793267
162734118.xls.ms_office1
12
12
RNC
None
Not involved
Not involved
Not involved
dBm
430
430
Cell
None
Not involved
Not involved
dBm
24
24
Cell
None
Not involved
Not involved
8/7/2013
16803267
162734118.xls.ms_office1
dBm
24
24
Cell
None
Not involved
Not involved
8/7/2013
16813267
162734118.xls.ms_office1
dBm
24
24
Cell
None
Not involved
Not involved
8/7/2013
16823267
162734118.xls.ms_office1
dBm
24
24
Cell
None
Not involved
Not involved
8/7/2013
16833267
162734118.xls.ms_office1
None
Cell
None
Not involved
Not involved
None
FALSE
FALSE
Cell
None
Not involved
Not involved
8/7/2013
16843267
162734118.xls.ms_office1
None
Cell
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
Ethernet port
When the value of [PARA]CH KTYPE[/P ARA] in [MML]STR IPCHK[/M Not ML] is set involved to MBFD, the multi hop BFD detect local IP should be set. Only valid to the slot of Not FG2a and involved GOUa.
Not involved
Not involved
None
None
RNC
Not involved
Not involved
8/7/2013
16853267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
None
100
RNC
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user This parameter cannot be modified.
per cent
100
100
RNC
None
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
8/7/2013
16863267
162734118.xls.ms_office1
None
Cell
None
Not involved
Not involved
8/7/2013
16873267
162734118.xls.ms_office1
This parameter is used with the [MML]AD D MBMSAL ARMSERV ICE[/MML] command to enable the no MBMS data check. If the [MML]AD D MBMSAL ARMSERV ICE[/MML] specified service has no data on the Iu interface within the period specified by this parameter, an alarm is reported.Th e parameter This parameter is valid olny when [PARA]Mb msSwitch[/ PARA] is ON.
This parameter is used with the [MML]AD D MBMSAL ARMSERV ICE[/MML] command to enable the no MBMS data check. If the [MML]AD D MBMSAL ARMSERV ICE[/MML] specified service has no data on the Iu interface within the period specified by this parameter, an alarm is reported.Th e parameter
min
RNC
Not involved
Not involved
None
OFF
RNC
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
16883267
162734118.xls.ms_office1
None
TRUE
TRUE
Cell
None
Not involved
Not involved
None
Cell
None
Not involved
Not involved
None
OFF
RNC
None
Not involved
Not involved
8/7/2013
16893267
162734118.xls.ms_office1
kbit/s
D16
RNC
None
Not involved
Not involved
None
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
None
RNC
None
Not involved
Not involved
Not involved
None
ON
RNC
None
Not involved
Not involved
kbit/s
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
16903267
162734118.xls.ms_office1
None
Not involved
Not involved
byte
1000
SAALLNK/ AAL2PAT H/IPOAPV C/VPCLCX using this ATM traffic record index
When the value of [PARA]ST[ /PARA] in [MML]AD D ATMTRF[/ Not MML] is set involved to RTVBR or NRTVBR, this parameter should be set.
Not involved
Not involved
8/7/2013
16913267
162734118.xls.ms_office1
None
None
RNC(SET MBMSPER F,ADD IMSISNAM AP,ADD LASNAMA None P,ADD CNOPERA TOR) Cell(ADD GSMCELL)
Not involved
Not involved
Not involved
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
The value of this parameter must fulfill the following condition: [PARA]Mc chAccessPe riodCoef[/P ARA] > [PARA]Mc chRepPerio dCoef[/PAR A]. The value of this parameter must fulfill the following condition: [PARA]Mc chModPerio dCoef[/PAR A] > [PARA]DR XCycleLen Coef[/PAR A] in [MML]AD D CNDOMAI N[/MML].
8/7/2013
16923267
162734118.xls.ms_office1
The value of this parameter must fulfill the following condition: [PARA]Mc chAccessPe riodCoef[/P ARA] > [PARA]Mc chRepPerio dCoef[/PAR A].
None
RNC
None
Not involved
Not involved
None
None
MLPPP Group
None
None
SAALLNK/ AAL2PAT H/IPOAPV C/VPCLCX using this ATM traffic record index
When the value of [PARA]MP TYPE[/PA RA] in [MML]AD D MPGRP[/M ML] is set to MCPPP, this parameter should be set. When the value of [PARA]ST[ /PARA] in [MML]AD D ATMTRF[/ MML] is set to UBR_PLUS , the Minimum cell rate should be set.
Not involved
Not involved
Not involved
Not involved
Not involved
None
None
Ethernet port
None
Not involved
Not involved
Not involved
None
None
Ethernet port
None
Not involved
Not involved
Not involved
8/7/2013
16933267
162734118.xls.ms_office1
None
This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to EVENT_T RIGGER.
Not involved
Not involved
None
None
Ethernet port
None
Not involved
Not involved
Not involved
None
None
Ethernet port
None
Not involved
Not involved
Not involved
8/7/2013
16943267
162734118.xls.ms_office1
When the value of [PARA]ME PTYPE[/PA RA] in [MML]AD D ETHMEP[/ Not MML] is set involved to LocalMep, the PortNo and PortType should be set.
None
None
Ethernet port
Not involved
Not involved
None
LONG
LONG
None
Not involved
Not involved
None
None
Cell
None
Not involved
Not involved
Not involved
dB
-7
-7
Cell
None
Not involved
Not involved
8/7/2013
16953267
162734118.xls.ms_office1
This paramter is valid only when [PARA]ST TDSupInd[/ PARA] of [MML]AD D CELLSETU P[/MML] is set to STTD_Sup ported. When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set.
None
FALSE
FALSE
Cell
Not involved
Not involved
kbit/s
None
LGC port
Not involved
Not involved
None
D14
D14
Transport channel
None
Not involved
Not involved
Not involved
None
SF8
SF8
NodeB
None.
Not involved
Not involved
8/7/2013
16963267
162734118.xls.ms_office1
dB
21
RNC
None
Not involved
Not involved
min
None
Not involved
Not involved
min
None
Not involved
Not involved
8/7/2013
16973267
162734118.xls.ms_office1
min
None
Not involved
Not involved
min
None
RNC
This parameter is valid only when [PARA]Cho iceRprtUnit ForDlBasic Meas[/PAR A] is set to MIN,and it must satisfy the following relationship: [PARA]Mi nForDlBasi cMeas[/PA RA] x 60 < [PARA]Intr aFreqLdbPe riodTimerL en[/PARA]/ 2; [PARA]Mi nForDlBasi cMeas[/PA RA] x 60 < [PARA]Puc PeriodTime rLen[/PAR A]/2; [PARA]Mi
Not involved
Not involved
8/7/2013
16983267
162734118.xls.ms_office1
This parameter is valid only when [PARA]Cho iceRprtUnit ForDlOlcM eas[/PARA] is set to MIN. This parameter is valid only when [PARA]Cho iceRprtUnit ForHsdpaR ateMeas[/P ARA] is set to MIN. This parameter is valid only when [PARA]Cho iceRprtUnit ForHsdpaP wrMeas[/P ARA] is set to MIN. This parameter is valid only when [PARA]Cho iceRprtUnit ForHsupaR ateMeas[/P ARA] is set to MIN.
min
None
RNC
Not involved
Not involved
min
None
RNC
Not involved
Not involved
min
None
RNC
Not involved
Not involved
min
None
RNC
Not involved
Not involved
8/7/2013
16993267
162734118.xls.ms_office1
This parameter is valid only when [PARA]Cho iceRprtUnit ForUlBasic Meas[/PAR A] is set to MIN,and it must satisfy the following relationship: [PARA]Mi nForUlBasi cMeas[/PA RA] x 60 < [PARA]Ldr PeriodTime rLen[/PAR A]/2; [PARA]Mi nForUlBasi cMeas[/PA RA] x 60000 < [PARA]Olc PeriodTime rLen[/PAR A]/2 . This This parameter is valid only when [PARA]Cho iceRprtUnit ForUlOlcM eas[/PARA] is set to MIN.
min
None
RNC
Not involved
Not involved
min
None
RNC
Not involved
Not involved
8/7/2013
17003267
162734118.xls.ms_office1
min
None
Not involved
Not involved
None
IMA group
None
Not involved
Not involved
dBm
313
313
Cell
The value of this parameter must satisfy the following relationship: [PARA]Mi nPCPICHP ower[/PAR A] <= [PARA]Ma xPCPICHP ower[/PAR A].
Not involved
Not involved
8/7/2013
17013267
162734118.xls.ms_office1
When the value of [PARA]CH KTYPE[/P ARA] in [MML]STR IPCHK[/M ML] is set to SBFD or MBFD, the min interval of BFD packet receive should be set. When the value of [PARA]CH KTYPE[/P ARA] in [MML]STR IPCHK[/M ML] is set to SBFD or MBFD, the min interval of BFD packet send should be set.
ms
100
100
Ethernet port
Not involved
Not involved
Not involved
ms
100
100
Ethernet port
Not involved
Not involved
Not involved
In order to modify this parameter, you must use the command [MML]STP IPCHK[/M ML] first and [MML]STR IPCHK[/M ML] next.
None
SF4
SF4
NodeB
None.
Not involved
Not involved
8/7/2013
17023267
162734118.xls.ms_office1
None
Transport channel
None
Cell
None
None
RNC(SET MBMSPER F,ADD IMSISNAM AP,ADD LASNAMA None P,ADD CNOPERA TOR) Cell(ADD GSMCELL)
Not involved
Not involved
Not involved
8/7/2013
17033267
162734118.xls.ms_office1
None
COMM_M OCN_NRI_ GLOBAL_ CONFIG_ MODE_SW ITCH:ON, RNC COMM_MI B_MULTI_ PLMN_LIS T_ALLOW ED_SWITC H:ON
When [PARA]MO CNSupport[ /PARA] in [MML]SET OPERATO RSHARIN GMODE[/ MML] is set to YES, MocnContr olSwitch needs to be set.Otherwis e,it does not need.
Not involved
Not involved
None
NO
RNC
None
Not involved
Not involved
If the RAN Sharing Support and MOCN Support are both switched off,Redunda nt operators should be removed by [MML]RM V CNOPERA TOR[/MML ] and only one operator can exist. The parameter modificatio n has no impact on the equipment.
None
OFF
RNC
None
Not involved
Not involved
Not involved
8/7/2013
17043267
162734118.xls.ms_office1
If the mode is not consistent, will interrupt service until it is consistent.
None
None
Port
None
Port
The value of this parameter should be consistent with the peer one.
None
AUTO
RNC
None
Not involved
Not involved
None
None
None
Ethernet port
When the value of [PARA]CH KTYPE[/P ARA] in [MML]STR IPCHK[/M Not ML] is set involved to SBFD or ARP, the port work mode should be set.
Not involved
Not involved
8/7/2013
17053267
162734118.xls.ms_office1
If the SCTP link is set to SERVER and the application type is NBAP, the working mode The cannot be services are changed to interrupted CLIENT. until the For the SCTP link SCTP link is working whose normally. application type is M3UA, the working mode can be modified only when the upperlayer application The modificatio n of the timer involves the Not peer end. involved For details, refer to ITUT Q2630.1/IT U-T Q2630.2. The modificatio n of the timer involves the Not peer end. involved For details, refer to ITUT Q2630.1/IT U-T Q2630.2.
None
None
SCTP
None
ms
10000
RNC
None
Not involved
ms
10000
RNC
None
Not involved
8/7/2013
17063267
162734118.xls.ms_office1
This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA.
ms
1000
1000
RAB
Not involved
Not involved
60
RNC
None
Not involved
Not involved
8/7/2013
17073267
162734118.xls.ms_office1
The IP address of the DHCP server must be one of the following addresses configured for the FG2a/GOU a/PEUa/UO Ia/POUa: equipment IP address, Ethernet port IP address, PPP link local IP address, and MLPPP group local IP address. This parameter cannot be modified.
None
None
RNC
When the value of [PARA]US EMP[/PAR A] in [MML]AD D NODEBES N[/MML] is set to Enable, this parameter should be set.
Not involved
Not involved
None
None
Not involved
Not involved
8/7/2013
17083267
162734118.xls.ms_office1
None
When the value of [PARA]SA ALLNKT[/ Not PARA] is involved set to NNI, this parameter is valid.
Not involved
Not involved
Modifying this parameter does not affect the existing SAAL link but may affect the SAAL link setup mode.
None
MCPPP
MCPPP
None
Not involved
Not involved
None
None
Board
None
Not involved
Not involved
Not involved
8/7/2013
17093267
162734118.xls.ms_office1
None
OFF
RNC
None
Not involved
Not involved
None
OFF
RNC
None
Not involved
Not involved
8/7/2013
17103267
162734118.xls.ms_office1
None
None
Cell
When the value of [PARA]Ms gInd[/PAR A] is set to ON, this parameter is valid. When [PARA]CB Switch[/PA RA] is set to ON in [MML]SET RNCCBPA RA[/MML] and the CBS license is valid, the cell broadcast can be performed in a specified cell. This parameter specifies the content of broadcast messages.
N (The UE in idle mode may receive Not the RNC involved built-in cell broadcast messages.)
Not involved
This parameter supports only ASCII code character set.The parameter modificatio n has no impact on the equipment.
None
OFF
OFF
Cell
None
N (The UE in idle mode may receive Not the RNC involved built-in cell broadcast messages.)
Not involved
1. Set this parameter to ON if you want to use the RNC built-in cell broadcast function. 2. Do not set this parameter to ON when the RNC is connected to the CBS server. 3. The parameter modificatio n has no impact on the equipment.
8/7/2013
17113267
162734118.xls.ms_office1
None
None
Not involved
Not involved
Not involved
8/7/2013
17123267
162734118.xls.ms_office1
None
60
60
Cell
The value of this parameter must satisfy the following relationship: [PARA]Mtc hMaxPwr[/ PARA] > [PARA]Mtc hRsvPwr[/P ARA] .
Not involved
Not involved
8/7/2013
17133267
162734118.xls.ms_office1
None
40
40
Cell
The value of this parameter must satisfy the following relationship: [PARA]Mtc hMaxSf[/P ARA] > [PARA]Mtc hRsvSf[/PA RA] .
Not involved
Not involved
8/7/2013
17143267
162734118.xls.ms_office1
per cent
The value of this parameter must fulfill the following Not condition: involved [PARA]Mtc hMinPerc0[ /PARA] >= [PARA]Mtc hMinPerc15 [/PARA].
Not involved
Not involved
8/7/2013
17153267
162734118.xls.ms_office1
per cent
The value of this parameter must fulfill the following Not condition: involved [PARA]Mtc hMinPerc0[ /PARA] >= [PARA]Mtc hMinPerc15 [/PARA].
Not involved
Not involved
kbit/s
D16
RNC
None
Not involved
Not involved
8/7/2013
17163267
162734118.xls.ms_office1
None
FALSE
RNC
None
Not involved
Not involved
None
20
20
Cell
The value of this parameter must satisfy the following relationship: [PARA]Mtc hMaxPwr[/ PARA] > [PARA]Mtc hRsvPwr[/P ARA].
Not involved
Not involved
8/7/2013
17173267
162734118.xls.ms_office1
None
16
16
Cell
The value of this parameter must satisfy the following relationship: [PARA]Mtc hMaxSf[/P ARA] > [PARA]Mtc hRsvSf[/PA RA] .
Not involved
Not involved
None
None
Cell
None
Not involved
Not involved
8/7/2013
17183267
162734118.xls.ms_office1
When the value of [PARA]MT RLGY[/PA RA] in [MML]AD D GPS[/MML ] is selected as MET, the ALTITUDE should be Not set; involved When the value of [PARA]MT RLGY[/PA RA] in [MML]AD D GPS[/MML ] is selected as IMP, the ALTITUDE IMP should be set.
None
MET
MET
RNC
Not involved
Not involved
byte
None
Port
ls
When the value of [PARA]PP PMUX[/PA PPP RA] in Link(ADD 1000(ADD 1000(ADD [MML]AD PPPLNK) PPPLNK) PPPLNK) D MLPPP Y -(ADD None(ADD MPGRP[/M Group, PPP MPGRP) MPGRP) ML] is set Link(ADD to MPGRP) ENABLE, this parameter should be
PPP link
The negotiation will be Interrupt successful the service only when until the negotiate parameter is successfully set the same again. with the local and peer device.
8/7/2013
17193267
162734118.xls.ms_office1
When the value of [PARA]MO DE[/PARA] in [MML]STR IPCHK[/M ML] is set to REDPORT, the backup port mask should be set. When the value of [PARA]SA ALLNKT[/ PARA] is set to NNI, this parameter is
None
None
Ethernet port
Not involved
Not involved
Not involved
In order to modify this parameter, you must use the command [MML]STP IPCHK[/M ML] first and [MML]STR IPCHK[/M ML] next. For parameter modificatio n, refer to ITU-T Q.2110. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
100
100
SAAL
Not involved
Not involved
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
8/7/2013
17203267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
D1
RNC
None
Not involved
Not involved
None
D50
RNC
None
Not involved
Not involved
None
D1
RNC
None
Not involved
Not involved
None
D1
RNC
None
Not involved
Not involved
8/7/2013
17213267
162734118.xls.ms_office1
None
None
RNC(ADD OPC,ADD N7DPC,AD D M3RT,AD D M3LNK,A DD M3LKS,AD D M3LE,ADD MTP3LKS, None ADD MTP3RT) Adjacent Node(ADD ADJNODE) MTP3(AD D MTP3LNK) M3UA(AD D M3DE)
Not involved
Not involved
frame
Transport channel
The value of this parameter must be set to meet the following conditions: Y [PARA]NB 01max[/PA RA] >= [PARA]NB 01min[/PA RA].
Cell
8/7/2013
17223267
162734118.xls.ms_office1
The value of this parameter must be set to meet the following conditions: Y [PARA]NB 01max[/PA RA] >= [PARA]NB 01min[/PA RA]. N (No impact on the UE in idle mode)
frame
Transport channel
Cell
None
20
RNC
None
Not involved
None
58080
The SCTP links of all the subracks, which work None as the server and whose upper layer is NBAP
The SCTP link works as the server and the upper-layer application is NBAP.
The parameter modificatio Not n has no involved impact on the equipment. The parameter modificatio n should be negotiated with the peer end, The and after services are modificatio interrupted n, the RNC until the should be SCTP link reset. It is is working recommend normally. ed that this parameter should not be modified when the system is running.
8/7/2013
17233267
162734118.xls.ms_office1
If the transport type of the NodeB is IUB-IP, the next hop IP address must be one of the following configured addresses: PPP link peer IP address, MLPPP group peer IP address, and the IP address in the same network segment as that of the FE/GE port. If the transport type of the NodeB is IUB-IP, the next hop IP address must be one of the following configured addresses: PPP link peer IP address, MLPPP group peer IP address, and the IP address in the same network segment as that of the FE/GE port.
None
None
RNC
When the value of [PARA]NB TRANTP[/ PARA] in [MML]AD D NODEBIP[/ MML] is set to IPTRANS_I P or ATMANDI PTRANS_I P, this parameter should be set.
Not involved
Not involved
None
None
RNC
When the value of [PARA]NB TRANTP[/ PARA] in [MML]AD D NODEBIP[/ MML] is set to IPTRANS_I P or ATMANDI PTRANS_I P, this parameter should be set.
Not involved
Not involved
8/7/2013
17243267
162734118.xls.ms_office1
None
20
RNC
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The IP address of the NodeB cannot be the one already configured for other NodeBs. It cannot be the same as the IP address already configured in the RNC. If the IP address of the NodeB is incorrect, the OM channel will be unavailable.
None
None
RNC
When the value of [PARA]NB TRANTP[/ PARA] in [MML]AD D NODEBIP[/ MML] is set to IPTRANS_I P or ATMANDI PTRANS_I P, this parameter should be set.
Not involved
Not involved
8/7/2013
17253267
162734118.xls.ms_office1
The IP address of the NodeB cannot be the one already configured for other NodeBs. It cannot be the same as the IP address already configured in the RNC. If the IP address of the NodeB is incorrect, the OM channel will be unavailable. When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN. When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN.
None
None
RNC
When the value of [PARA]NB TRANTP[/ PARA] in [MML]AD D NODEBIP[/ MML] is set to IPTRANS_I P or ATMANDI PTRANS_I P, this parameter should be set.
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
RNC
When the value of [PARA]US ENBLB2[/P ARA] in [MML]AD D NODEBES N[/MML] is set to Enable, this parameter should be set.
Not involved
Not involved
8/7/2013
17263267
162734118.xls.ms_office1
None
None
Cell
None
Not involved
Not involved
8/7/2013
17273267
162734118.xls.ms_office1
None
None
Cell
If the Downlink CAC algorithm switch select the equivalent user number algorithm,th en Intra Frequency LDB Algorithm must be closed.
Not involved
Not involved
8/7/2013
17283267
162734118.xls.ms_office1
None
None
Cell
PUC should not be adopted if cell's interfrequency measureme nt control information is configured not required, N (No the latter is impact on set the UE in by[MML]A idle mode) DD CELLMEA S[/MML]or [MML]MO D UCELLME AS[/MML], is configured as not required.
Not involved
Not involved
8/7/2013
17293267
162734118.xls.ms_office1
None
None
Not involved
Not involved
None
None
Not involved
Not involved
8/7/2013
17303267
162734118.xls.ms_office1
None
None
Cell
None
Not involved
Not involved
8/7/2013
17313267
162734118.xls.ms_office1
None
None
Not involved
Not involved
None
None
Not involved
Not involved
8/7/2013
17323267
162734118.xls.ms_office1
None
60
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
Cell
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
None
Cell
None
Not involved
Not involved
per cent
20
20
Cell
This paramter is valid only when [PARA]Dy nShutDown Type[/PAR A] is set to Conditional ShutDown.
Not involved
Not involved
8/7/2013
17333267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
None
NC0
NC0
Cell
None
Not involved
Not involved
None
Not involved
Not involved
8/7/2013
17343267
162734118.xls.ms_office1
None
ON
RNC
None
Not involved
Not involved
None
Cell
This parameter is valid only when [PARA]No nhcsInd[/P ARA] is set to CONFIGU RED.
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
None
None
RNC
After this parameter is modified, Less than the RNC 10 minutes must be reset to take effect.
8/7/2013
17353267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
For AEUa/AOU a/UOIa_AT M, next hop must be IPOA PVC peer address, for PEUa/POU a, next hop must be IP PPP link Route(ADD peer ip or Not IPRT) MLPPP involved RNC(ADD peer ip, for IPRTBIND) FG2a/GOU a, next hop must be in the same subnet with the port ip on the board, for UOIa_IP, next hop must be PPP peer ip.
Not involved
Not involved
8/7/2013
17363267
162734118.xls.ms_office1
None
The value of the parameter must satisfy the function below: [PARA]NF Cell(ADD astSpdEst[/ CELLHCS PARA]*[P HO) ARA]TSlo RNC(SET wSpdEst[/P HCSHO) ARA] >= [PARA]NSl owSpdEst[/ PARA]*[P ARA]TFast SpdEst[/PA RA].
Not involved
Not involved
None
None
RNC
Not involved
Not involved
8/7/2013
17373267
162734118.xls.ms_office1
None
Cell
None
Not involved
Not involved
8/7/2013
17383267
162734118.xls.ms_office1
NMO needs to be set when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to PS_DOMAI N; NMO does not need to be set when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to CS_DOMA IN.
None
MODE2
MODE2
RNC
Not involved
Not involved
The modificatio n of NMO is valid only when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to PS_DOMAI N.The parameter modificatio n has no impact on the equipment.
8/7/2013
17393267
162734118.xls.ms_office1
When the value of [PARA]Cs NriCfgMod e[/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to ON, or the value of [PARA]Ps NriCfgMod e[/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to SUPP_IUF LEX, SUPP_MO CN or SUPP_IUF LEX_MOC N, the settings of NNSfTmr is valid.The The parameter modificatio n has no impact on the equipment.
RNC
None
Not involved
Not involved
None
None
NodeB
None
Not involved
Not involved
Not involved
None
3840
3840
NodeB
None
Not involved
Not involved
8/7/2013
17403267
162734118.xls.ms_office1
None
3840
3840
NodeB
None
Not involved
Not involved
None
None
NodeB(AD D NODEB) Adjacent Node(ADD ADJNODE) RNC(STR NODEBDE TECT,ADD NODEBES N,ADD NODEBIP)
When the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to IUB, this parameter is Not valid. When the involved value of [PARA]Sel ectType[/P ARA] in [MML]STR NODEBDE TECT[/MM L] is set to SINGLE, this parameter is valid.
Not involved
Not involved
None
None
NodeB
None
Not involved
Not involved
Not involved
8/7/2013
17413267
162734118.xls.ms_office1
None
None
NodeB
None
Not involved
Not involved
8/7/2013
17423267
162734118.xls.ms_office1
None
None
NodeB(STR NODEBB WRPT,AD D NODEBOL C,ADD IPDL,ADD NODEBAL GOPARA, ADD NODEBLD R,ADD NODEB) (ADD CCP,ADD NCP,ADD LOCELL,A DD NBNODES YNCMONP ARA) Cell(ADD QUICKCE LLSETUP, ADD CELLSETU P)
The value of this parameter is dependent on the value of Not [PARA]No involved deBName[/ PARA] in [MML]AD D NODEB[/M ML].
Not involved
Not involved
8/7/2013
17433267
162734118.xls.ms_office1
Before modifying the NodeB to a version of R4 or earlier, deactivate the HSUPA and HSDPA functions of this NodeB. Before modifying the NodeB to a version of R5 or earlier, deactivate the MBMS function of the NodeB.Befo re modifying the NodeB to a version of R6 or earlier, deactivate the EFACH function of the NodeB. This parameter cannot be modified.
None
R7
R7
NodeB
None
Not involved
Not involved
min
30
30
NodeB
None
Not involved
Not involved
Not involved
None
PERIOD
PERIOD
NodeB
None
Not involved
Not involved
Not involved
8/7/2013
17443267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
None
NodeB
None
Not involved
Not involved
Not involved
None
None
NodeB
None
Not involved
Not involved
Not involved
None
None
NodeB
None
Not involved
Not involved
Not involved
None
NORMAL
NORMAL
NodeB
None
Not involved
Not involved
min
None
NodeB
None
Not involved
Not involved
None
NodeB
None
Not involved
Not involved
8/7/2013
17453267
162734118.xls.ms_office1
None
None
Adjacent Node
None
Not involved
Not involved
Not involved
None
PICO_TYP NodeB E1
None.
Not involved
Not involved
None
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
8/7/2013
17463267
162734118.xls.ms_office1
per cent
Cell
None
Not involved
Not involved
8/7/2013
17473267
162734118.xls.ms_office1
None
50
50
Cell
None
Not involved
Not involved
8/7/2013
17483267
162734118.xls.ms_office1
None
None
Cell
This paramter is valid only when [PARA]NPr ioFlag[/PA RA] is set to TRUE. This paramter is valid only when [PARA]NPr ioFlag[/PA RA] is set to TRUE; Also the value of this parameter must be different to the others.
Not involved
Not involved
None
None
Cell
This paramter is valid only when [PARA]NPr ioFlag[/PA RA] is set to TRUE.
Not involved
Not involved
8/7/2013
17493267
162734118.xls.ms_office1
None
FALSE
FALSE
Cell
None
Not involved
Not involved
8/7/2013
17503267
162734118.xls.ms_office1
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
17513267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
RNC
None
RNC
8/7/2013
17523267
162734118.xls.ms_office1
None
None
1. If the original ATM address of the NodeB is configured with the route Services through carried on [MML]AD the network D element AAL2RT[/ with the MML], the specific parameter Not ATM cannot be involved address.(A modified. DD 2. If the AAL2RT) original ATM NodeB(AD address of D NODEB) the NodeB is configured with the route in the AAL2RT table, the parameter cannot be modified.
Not involved
Not involved
None
The value of the parameter must satisfy the function below: [PARA]NF Cell(ADD astSpdEst[/ CELLHCS PARA]*[P HO) ARA]TSlo RNC(SET wSpdEst[/P HCSHO) ARA] >= [PARA]NSl owSpdEst[/ PARA]*[P ARA]TFast SpdEst[/PA RA].
Not involved
Not involved
8/7/2013
17533267
162734118.xls.ms_office1
When the value of [PARA]Cs NriCfgMod e[/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to SUPP_IUF LEX or SUPP_IUF LEX_MOC N, or the value of [PARA]Ps NriCfgMod e[/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to SUPP_IUF LEX or SUPP_IUF LEX_MOC N, NullNRI must be
None
None
RNC
None
Not involved
Not involved
8/7/2013
17543267
162734118.xls.ms_office1
When [PARA]Dsa cAutoSwitc h[/PARA] is set to ON,the parameter need configure;el se,need not configure. If [MML]AD D CELLDSA CMANUA LPARA[/M ML][PARA ]Restriction Type[/PAR A] value is RestrictionF ixed,need set AcRestricti on value;when [MML]AD D CELLDSA CMANUA LPARA[/M
None
Not involved
Not involved
per cent
OMCH(AD D PPPLNK) Ethernet port(SET ETHPORT) None MLPPP Group, PPP Link(ADD MPGRP) LGC port(ADD IPLOGICP
Not involved
Not involved
Not involved
The negotiation will be successful only when the parameter is set the same with the local and peer device.
8/7/2013
17553267
162734118.xls.ms_office1
None
None
[PARA]OA MFLOWDS CP[/PARA] can not be the same with any Port Queue DSCP of IPPATH, or any DSCP used in [MML]AD D TRMMAP[/ MML].
Not involved
Not involved
The priority of the correspondi ng service will be interrupt if the DSCP of the port's queue is modified.
None
None
Port Queue
None
Not involved
Not involved
The priority of the correspondi ng service will be interrupt if the DSCP of the port's queue is modified.
dB
Cell
None
Not involved
Not involved
8/7/2013
17563267
162734118.xls.ms_office1
dB
-4
-4
Cell
None
Not involved
Not involved
dB
Cell
None
Not involved
Not involved
dB
-4
-4
Cell
None
Not involved
Not involved
8/7/2013
17573267
162734118.xls.ms_office1
dB
Cell
None
Not involved
Not involved
dB
-2
-2
Cell
None
Not involved
Not involved
8/7/2013
17583267
162734118.xls.ms_office1
When [PARA]Cho iceRprtUnit ForUlBasic Meas[/PAR A] and [PARA]Cho iceRprtUnit ForDlBasic Meas[/PAR A] are set to MIN,the value of this parameter must satisfy the following relationship: [PARA]Olc PeriodTime rLen[/PAR A] > 2 x 60 x 1000 x [PARA]Mi nForUlBasi cMeas[/PA RA]; [PARA]Olc PeriodTime rLen[/PAR A] > 2 x 60 x 1000 x
ms
3000
RNC
Not involved
Not involved
8/7/2013
17593267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
RAB
None.
Not involved
Not involved
8/7/2013
17603267
162734118.xls.ms_office1
1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnect ed with the equipment of other vendors. The parameter modificatio n has no impact on the equipment.
None
None
Not involved
Not involved
Not involved
None
None
Not involved
Not involved
None
None
degree
None
When the value of [PARA]BT[ /PARA] in [MML]SET OPT[/MML ] is set to AOUa or POUa, and Correspondi the ng optical [PARA]PS[ port /PARA] in [MML]SET OPT[/MML ] is set to ALL, the optical interface standard should be set. Valid when [PARA]Cel lLocCfgTyp e[/PARA] is Cell set to BOTH or CELL_CEN TER
Not involved
Not involved
Not involved
The settings of the local end and the peer end should be consistent.
Not involved
Not involved
8/7/2013
17613267
162734118.xls.ms_office1
None
None
Not involved
None
ACTIVE
ACTIVE
Cell
Not involved
Not involved
None
None
Not involved
Not involved
8/7/2013
17623267
162734118.xls.ms_office1
None
This parameter is valid when the OVERLAY _SWITCH is ON. The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML].
Not involved
Not involved
None
LOCAL
LOCAL
AAL2 Path
None
Not involved
Not involved
None
YES
YES
Services carried on the network element None with the specific ATM address.
Not involved
Not involved
8/7/2013
17633267
162734118.xls.ms_office1
None
None
Not involved
Not involved
None
None
When the value of [PARA]LN KT[/PARA] in [MML]AC T VCLCC[/M ML] is set to AAL2 AAL2PAT Path(LOP H, the VCL,ADD AAL2 path AAL2PAT ID should Not H) be set. involved When the AAL2PAT value of H(ACT [PARA]LN VCLCC) KT[/PARA] in [MML]LOP VCL[/MML ] is set to AAL2PAT H, the value of [PARA]PA THID[/PAR A] should IP Path(ADD IPPATHBI ND,ADD IPPATH) IP path(ACT IPPM)
Not involved
Not involved
None
None
None
Not involved
Not involved
Not involved
8/7/2013
17643267
162734118.xls.ms_office1
None
QOS
IP Path
When the value of [PARA]AN I[/PARA] in [MML]AD D IPPATH[/ MML] is set Not to IUPS,the involved value of [PARA]PA THT[/PAR A] must be set to RT/NRT/Q OS.
Not involved
Not involved
None
None
RNC
When the value of [PARA]BT[ /PARA] in [MML]LO D PATCH[/M ML] DPUb, the value of [PARA]PA TTYPE[/P ARA]
Not involved
8/7/2013
17653267
162734118.xls.ms_office1
dB
-20
-20
Transport channel
None
Not involved
8/7/2013
17663267
162734118.xls.ms_office1
1. The value of this parameter must satisfy the following relationship: [PARA]Mi nPCPICHP ower[/PAR A] <= [PARA]PC PICHPower [/PARA] <= [PARA]Ma xPCPICHP ower[/PAR A] 2. To modify the PCPICH power, the intrafrequency load balance algorithm of the cell should be disabled. You can use [MML]LST CELLALG
dBm
330
330
Cell
Not involved
8/7/2013
17673267
162734118.xls.ms_office1
dB
Cell
None
Not involved
Not involved
8/7/2013
17683267
162734118.xls.ms_office1
None
None
SAALLNK/ AAL2PAT H/IPOAPV C/VPCLCX using this ATM traffic record index
1.When the value of [PARA]ST[ /PARA] in [MML]AD D ATMTRF[/ MML] is set to CBR or RTVBR or NRTVBR and Not [PARA]UT involved [/PARA] is selected, this parameter should be set. 2.[PARA]P CR[/PARA] must be larger than [PARA]SC R[/PARA].
Not involved
Not involved
8/7/2013
17693267
162734118.xls.ms_office1
PC_AMR_ MODE_IN DUCE_BL ER_ALTER _SWITCH: OFF, PC_DL_IN NER_LOO P_PC_ACT IVE_SWIT CH:ON, PC_DOWN LINK_PO WER_BAL ANCE_SW ITCH:ON, RNC PC_EFACH _ECN0_DY N_ADJ_S WITCH:OF F, PC_FP_MU LTI_RLS_I ND_SWIT CH:ON, PC_HSUPA _HARQNU M_AUTO_ ADJUST_S WITCH:OF F, PC_HSUPA
None
None
Not involved
Not involved
RNC
None
Not involved
Not involved
ms
1000
1000
Ethernet port
None
Not involved
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.
byte
128
128
Ethernet port
None
Not involved
Not involved
Not involved
8/7/2013
17703267
162734118.xls.ms_office1
None
None
Cell
None
Not involved
Not involved
None
None
RNC
The parameter must not be the same as Not any IP involved address that has been configured in the RNC.
Not involved
Not involved
None
None
None
Not involved
Not involved
The local IP address and the peer IP address must be in the same network segment, and the peer IP address cannot be the same as the local IP address in the RNC. This parameter cannot be modified.
None
None
Ethernet port
None
Not involved
Not involved
Not involved
None
None
SCTP
None
The addresses of both ends of the SCTP The are the services are parameters interrupted that should until the be SCTP link negotiated is working with the normally. peer end before modificatio n.
8/7/2013
17713267
162734118.xls.ms_office1
None
None
SCTP
None
The addresses of both ends of the SCTP The are the services are parameters interrupted that should until the be SCTP link negotiated is working with the normally. peer end before modificatio n.
None
None
When the value of [PARA]LN KT[/PARA] in [MML]LOP VCL[/MML ] is set to IPOAPVC,t he value of [PARA]PE ERIPADDR [/PARA] should be Not set. involved When the value of [PARA]LN KT[/PARA] in [MML]AC T VCLCC[/M ML] is set to IPOAPVC, the peer IP address should be
Not involved
Not involved
8/7/2013
17723267
162734118.xls.ms_office1
None
None
IP Path
[PARA]IPA DDR[/PAR A] and [PARA]PE ERIPADDR [/PARA] in [MML]AD D IPPATH[/ MML] must be at one network segment;([P ARA]IPAD Not DR[/PARA involved ],[PARA]P EERIPADD R[/PARA],[ PARA]PEE RMASK[/P ARA] in [MML]AD D IPPATH[/ MML]) conflicts with other IPPATH whose type is IUPS. N (No impact on the UE in idle mode)
Not involved
Not involved
None
Invalid
Invalid
Cell
None
Not involved
Not involved
8/7/2013
17733267
162734118.xls.ms_office1
None
([PARA]IP ADDR[/PA RA],[PARA ]PEERIPA DDR[/PAR A],[PARA] PEERMAS K[/PARA] Not involved in [MML]AD D IPPATH[/ MML]) conflicts with other IP Path whose type
Not involved
Not involved
None
None
NodeB
None
Not involved
Not involved
None
None
SCTP
None
None
None
NodeB
None
Not involved
The SCTP port number is the The parameter services are that should interrupted be until the negotiated SCTP link with the is working peer end normally. before modificatio n. The parameter modificatio Not n has no involved impact on the equipment.
8/7/2013
17743267
162734118.xls.ms_office1
Only when [PARA]PE ERT[/PAR A] is selected to be IUB, the IPOAPVC can be added to a virtual port.
None
None
IPoA PVC
Not involved
Not involved
30(ADD CELLINTE RRATHON COV,ADD CELLINTE RRATHOC OV) 30 -(SET INTERRAT HONCOV, SET INTERRAT HOCOV)
Cell(ADD CELLINTE RRATHON COV,ADD CELLINTE RRATHOC OV) None RNC(SET INTERRAT HONCOV, SET INTERRAT HOCOV)
Not involved
Not involved
30
30
Cell
None
Not involved
Not involved
8/7/2013
17753267
162734118.xls.ms_office1
ms
D4000
D4000
RAB
None.
Not involved
Not involved
8/7/2013
17763267
162734118.xls.ms_office1
ms
D4000
D4000
RAB
None.
Not involved
Not involved
None
RAB
This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA.
Not involved
Not involved
8/7/2013
17773267
162734118.xls.ms_office1
This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA. When the value of [PARA]PA THCHK[/P ARA] in [MML]AD D IPPATH[/ MML] is set to ENABLED, this parameter is valid.
None
RAB
Not involved
Not involved
IP Path
Not involved
Not involved
When the network is in poor running status, the detection period cannot be set to a small value. If the value is too small, the path status may be affected.
8/7/2013
17783267
162734118.xls.ms_office1
ms
This parameter is valid when [PARA]Inte rFreqReport Mode[/PAR A] is set to EVENT_T RIGGER.
Not involved
Not involved
8/7/2013
17793267
162734118.xls.ms_office1
ms
Not involved
Not involved
ms
This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to EVENT_T RIGGER.
Not involved
Not involved
8/7/2013
17803267
162734118.xls.ms_office1
ms
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
8/7/2013
17813267
162734118.xls.ms_office1
None
Not involved
Not involved
None
150
RNC
None
Not involved
Not involved
8/7/2013
17823267
162734118.xls.ms_office1
None
None
Physical channel
This parameter is valid when [PARA]Acc essServiceC lass[/PARA ] is set to ASC2,ASC 3,ASC4,AS C5,ASC6 or ASC7.
Not involved
None
Enable
Enable
None
PPP link
None
None
IP path
When the value of [PARA]ISQ OSPATH[/ PARA] in [MML]AC Not T involved IPPM[/MM L] is set to YES, this parameter should be set.
Not involved
Not involved
8/7/2013
17833267
162734118.xls.ms_office1
1.The phb of the traffic's transmissio n path is determined like this: if the phb of this transmissio n path is QOS, use the traffic's phb from Not TRMMAP; involved if the phb of this transmissio n path is BE,AF11,A F12,AF13, AF21,AF22 ,AF23,AF3 1,AF32,AF 33,AF41,A F42,AF43,E F, use the phb of transmissio
None
None
Board
Not involved
Not involved
8/7/2013
17843267
162734118.xls.ms_office1
-(ADD FACH,AD D PICH,ADD PCH,ADD SCCPCHTF C,ADD SCCPCHB ASIC) 3(ADD PCCPCH) 6(ADD AICH) 4(ADD PRACHBA SIC,ADD PRACHTF C,ADD PRACHAS C,ADD PRACHSL OTFORMA T,ADD PRACHAC TOASCMA P,ADD RACH) 2(ADD PCPICH) 0(ADD PSCH) 1(ADD None(ADD FACH,AD D PRACHAC TOASCMA P,ADD PCH,ADD SCCPCHTF C,ADD PCCPCH,A DD SCCPCHB ASIC) 6(ADD AICH) 4(ADD PRACHBA SIC,ADD PRACHTF C,ADD PRACHAS C,ADD PRACHSL OTFORMA T,ADD RACH) 2(ADD PCPICH) 8(ADD PICH) 0(ADD PSCH) None Physical channel(AD D SSCH,ADD PSCH,ADD PRACHBA SIC,ADD PRACHTF C,ADD FACH,AD D PICH,ADD PRACHAS C,ADD PRACHSL OTFORMA None T,ADD PCH,ADD SCCPCHTF C,ADD PCPICH,A DD RACH,AD D AICH,ADD PCCPCH,A DD SCCPCHB ASIC) Cell(ADD PRACHAC TOASCMA Cell None
None
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
None
10
10
Physical channel
None
Not involved
Not involved
Not involved
None
V36
V36
Physical channel
None
Not involved
Not involved
Not involved
8/7/2013
17853267
162734118.xls.ms_office1
dB
-7
-7
Cell
None
Not involved
None
None
Ethernet port
None
Not involved
Not involved
Not involved
None
10
10
RNC
None
Port
The time between deactivate and activate the port. The time between deactivate and activate the port.
byte
128
128
RNC
None
Port
byte
128
128
Ethernet port
None
Not involved
Not involved
Not involved
8/7/2013
17863267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
byte
56
56
Ethernet port
None
Not involved
Not involved
Not involved
byte
128
128
Ethernet port
None
Not involved
Not involved
Not involved
None
None
RNC
The value of this parameter must satisfy the following Not relationship: involved [PARA]Plm nValTagMa x[/PARA] > [PARA]Plm nValTagMi n[/PARA]. The value of this parameter must satisfy the following Not relationship: involved [PARA]Plm nValTagMa x[/PARA] > [PARA]Plm nValTagMi n[/PARA].
Not involved
Not involved
None
None
RNC
Not involved
Not involved
8/7/2013
17873267
162734118.xls.ms_office1
When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set. When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set. If the Ip path is configured on logic port, this parameter must be less than [PARA]PL PRD[/PAR A] and [PARA]LA TPRD[/PA RA] in command [MML]AD D IPLOGICP ORT[/MML
ms
10
10
LGC port
Not involved
Not involved
per mill
30
30
LGC port
Not involved
Not involved
ms
IP path
Not involved
Not involved
This IP path must be already configured. Before modify, the IPPM of the IPPATH should be deactivate and activate again.
8/7/2013
17883267
162734118.xls.ms_office1
Ethernet port(ADD ETHIP,AD D ETHREDP ORT,ACT ETHPORT, SET ETHPORT) Port(SET MSP,SET MSPCMD) RNC(SWP ETHPORT, CLR MSPREP) Loopback optical port(SET OPTLOP) Optical port(ACT MSP) When the value of [PARA]PS[ /PARA] in [MML]SET OPT[/MML ] is SINGLE, the port number should be set. When the value of [PARA]LS[ /PARA] in Not [MML]SET involved COPTLNK[ /MML] is set to PORT or SINGLE, the parameter [PARA]PN[ Correspondi /PARA] ng optical should be port(SET set. OPT) When the Optical value of Port(SET [PARA]CH COPTLNK) KTYPE[/P LGC ARA] in RNC None Not involved
None
None
Not involved
Not involved
None
None
Not involved
Not involved
This parameter cannot be modified. The parameter modificatio n has no impact on the equipment.
None
None
Ethernet port
None
Not involved
Not involved
Not involved
None
None
Ethernet port
None
Not involved
Not involved
Not involved
8/7/2013
17893267
162734118.xls.ms_office1
The time between deactivate and activate the port.
None
None
RNC
None
Port
None
None
Ethernet port
When the value of [PARA]CH KTYPE[/P ARA] in [MML]STR IPCHK[/M Not ML] is set involved to SBFD or ARP, the Ethernet port number should be set. None Not involved
Not involved
Not involved
None
None
SRB
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
This parameter cannot be modified. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
8/7/2013
17903267
162734118.xls.ms_office1
ms
50
RNC
The value of this parameter must be set to meet the following conditions: 100 x [PARA]Ma xQueueTim eLen[/PAR A] > [PARA]Poll TimerLen[/ PARA].
Not involved
Not involved
ms
SAAL
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
Modifying this parameter does not affect the existing SAAL link but may affect the next setup of the SAAL link. The parameter modificatio n has no impact on the equipment.
8/7/2013
17913267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
None
None
Ethernet port
None
Not involved
Not involved
Not involved
None
CLOSE
CLOSE
SRB
None
Not involved
Not involved
Not involved
None
None
CLOSE
CLOSE
SRB
None
Not involved
Not involved
Not involved
None
None
CLOSE
CLOSE
SRB
None
Not involved
Not involved
Not involved
None
None
CLOSE
CLOSE
SRB
None
Not involved
Not involved
Not involved
None
None
CLOSE
CLOSE
SRB
None
Not involved
Not involved
Not involved
None
None
CLOSE
CLOSE
SRB
None
Not involved
Not involved
Not involved
None
8/7/2013
17923267
162734118.xls.ms_office1
dB
In signaling transmissio n mode, set PowerOffse tPpm to -3; Physical in service channel transmissio n mode, set PowerOffse tPpm to -2.
None
Not involved
Not involved
Not involved
8/7/2013
17933267
162734118.xls.ms_office1
dB
Physical channel
None
Not involved
8/7/2013
17943267
162734118.xls.ms_office1
The IP address of the DHCP server must be one of the following addresses configured for the FG2a/GOU a/PEUa/UO Ia/POUa: equipment IP address, Ethernet port IP address, PPP link local IP address, and MLPPP group local IP address. This parameter cannot be modified.
None
None
RNC
When the value of [PARA]US EPPP[/PAR A] in [MML]AD D NODEBES N[/MML] is set to Enable, this parameter should be set.
Not involved
Not involved
None
None
LGC port
None
Not involved
Not involved
Not involved
None
None
The parameter PPP [PARA]PP Link(ADD PLNKN[/P PPPLNK) Not ARA] of MLPPP involved PPP link Link(ADD and MLPPP MPLNK) link can not be the same.
Not involved
Not involved
None
Enable
Enable
Not involved
Not involved
Not involved
8/7/2013
17953267
162734118.xls.ms_office1
When the value of [PARA]PO RTPROTY PE[/PARA] in [MML]AD D PORTFLO WCTRLPA RA[/MML] is set to IP, this parameter should be set.
None
None
RNC
Not involved
Not involved
None
Physical channel
None
Not involved
Not involved
Not involved
ms
D500(ADD CELLMBD RINTERFR EQ,ADD CELLINTE D500 RFREQHO COV) -(SET INTERFRE QHOCOV)
Cell(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)
This parameter is valid when [PARA]Inte rFreqReport Mode[/PAR A] is set to PERIODIC AL_REPO RTING.
Not involved
Not involved
8/7/2013
17963267
162734118.xls.ms_office1
None
20
20
Physical channel
None
Not involved
8/7/2013
17973267
162734118.xls.ms_office1
None
SIGNATU RE0, SIGNATU RE1, SIGNATU RE2, SIGNATU RE3, Physical SIGNATU channel RE4, SIGNATU RE5, SIGNATU RE6, SIGNATU RE7
None
Not involved
None
OFF
RNC
None
Not involved
Not involved
8/7/2013
17983267
162734118.xls.ms_office1
None
ON
RNC
None
Not involved
Not involved
None
HIGH
HIGH
Cell
None
Not involved
Not involved
Not involved
8/7/2013
17993267
162734118.xls.ms_office1
This parameter cannot be modified. This parameter cannot be modified. Modifying this parameter may affect the routing priority when there are multiple routes to the same destination signaling point.
None
None
IP Route
None
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
RNC(ADD MTP3RT) The route to the specific None M3DE decides the sequence.(A DD M3RT)
Not involved
Not involved
8/7/2013
18003267
162734118.xls.ms_office1
None
ARP
RNC
None
Not involved
Not involved
8/7/2013
18013267
162734118.xls.ms_office1
None
RNC
None.
Not involved
Not involved
None
RNC
None.
Not involved
Not involved
8/7/2013
18023267
162734118.xls.ms_office1
None
RNC
None.
Not involved
Not involved
None
RNC
None.
Not involved
Not involved
8/7/2013
18033267
162734118.xls.ms_office1
None
RNC
None.
Not involved
Not involved
min
None
RNC
None
Not involved
Not involved
8/7/2013
18043267
162734118.xls.ms_office1
All the switches have multiple choices. SELECT ALL means turning on all the switches; CLEAR ALL means turning off all the switches; GRAYED ALL means keeping the original states of all the switches. If the SYS_INFO _UPDATE_ FOR_IU_R ST switch is turned off, the BARRED_ CELL_FOR _CSDOMA
None
None
RNC
None
Not involved
Not involved
None
ITUT
ITUT
RNC
None
Not involved
Not involved
Not involved
8/7/2013
18053267
162734118.xls.ms_office1
20
RNC
1. For the detection timers that do not need to configure background services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure background services, the related T1 and T2 must not be 0 at the same time. 1. For the detection timers that do not need to configure conversatio nal services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure conversatio nal services, the related T1 and T2 must not be 0 at the same time.
Not involved
Not involved
20
RNC
Not involved
Not involved
8/7/2013
18063267
162734118.xls.ms_office1
20
RNC
1. For the detection timers that do not need to configure IMS signaling services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure IMS signaling services, the related T1 and T2 must not be 0 at the same time. 1. For the detection timers that do not need to configure interactive services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure interactive services, the related T1 and T2 must not be 0 at the same time.
Not involved
Not involved
20
RNC
Not involved
Not involved
8/7/2013
18073267
162734118.xls.ms_office1
20
RNC
1. For the detection timers that do not need to configure streaming services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure streaming services, the related T1 and T2 must not be 0 at the same time.
Not involved
Not involved
None
None
When the value of [PARA]BT[ /PARA] in [MML]SET Correspondi OPT[/MML Not ng optical involved ] is set to port AOUa or POUa, the port select should be set.
Not involved
Not involved
None
None
Not involved
Not involved
8/7/2013
18083267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
100
100
RNC
None
Not involved
Not involved
8/7/2013
18093267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is AF13. RNC When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF13. When the interface type is Iu-
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUPS, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
30
30
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
18103267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF13; transimssio RNC n type is Hybird IP, the parameter is LQAF13. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL. When the interface
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
18113267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
100
100
RNC
None
Not involved
Not involved
dB
-50
-50
Physical channel
None
Not involved
8/7/2013
18123267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
70
70
RNC
None
Not involved
Not involved
8/7/2013
18133267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is AF43. RNC When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF43. When the interface type is Iu-
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUPS, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
18143267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF43; transimssio RNC n type is Hybird IP, the parameter is LQAF43. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL. When the interface
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
18153267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
70
70
RNC
None
Not involved
Not involved
None
None
Cell
None
Cell
None
30
30
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
18163267
162734118.xls.ms_office1
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
None
100
100
RNC
None
Not involved
Not involved
per cent
This parameter is valid when [PARA]Nco vHoOn2Gld Ind[/PARA] in [MML]SET INTERRAT HONCOV[/ MML] is set to ON. This parameter is valid when [PARA]Nco vHoOn2Gld Ind[/PARA] is set to ON.
Not involved
Not involved
8/7/2013
18173267
162734118.xls.ms_office1
20
RNC
1. For the detection timers that do not need to configure background services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure background services, the related T1 and T2 must not be 0 at the same time. 1. For the detection timers that do not need to configure conversatio nal services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure conversatio nal services, the related T1 and T2 must not be 0 at the same time.
Not involved
Not involved
20
RNC
Not involved
Not involved
8/7/2013
18183267
162734118.xls.ms_office1
20
RNC
1. For the detection timers that do not need to configure IMS signaling services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure IMS signaling services, the related T1 and T2 must not be 0 at the same time. 1. For the detection timers that do not need to configure interactive services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure interactive services, the related T1 and T2 must not be 0 at the same time.
Not involved
Not involved
20
RNC
Not involved
Not involved
8/7/2013
18193267
162734118.xls.ms_office1
20
RNC
1. For the detection timers that do not need to configure streaming services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure streaming services, the related T1 and T2 must not be 0 at the same time.
Not involved
Not involved
None
OFF
RNC
None
Not involved
Not involved
The settings of PsInfoUpdF lag is valid only when the value of [PARA]Ps NriCfgMod e[/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to SUPP_IUF LEX or SUPP_IUF LEX_MOC N.The parameter modificatio n has no impact on the
8/7/2013
18203267
162734118.xls.ms_office1
900
RNC
PsInfoUpdT mr needs to be set when [PARA]PsI nfoUpdFlag [/PARA] in [MML]SET IUFLEX[/ MML] is set to ON; PsInfoUpdT mr does not need to be set when [PARA]PsI nfoUpdFlag [/PARA] in [MML]SET IUFLEX[/ MML] is set to OFF.
Not involved
Not involved
The settings of PsInfoUpdT mr is valid only when the value of [PARA]PsI nfoUpdFlag [/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to ON.The parameter modificatio n has no impact on the equipment. Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
100
100
RNC
None
Not involved
Not involved
8/7/2013
18213267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
100
100
RNC
None
Not involved
Not involved
8/7/2013
18223267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is AF33. RNC When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF33. When the interface type is Iu-
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUPS, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
18233267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF33; transimssio RNC n type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL. When the interface
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
18243267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is AF33. RNC When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF33. When the interface type is Iu-
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUPS, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
18253267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF33; transimssio RNC n type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL. When the interface
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
18263267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is AF33. RNC When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF33. When the interface type is Iu-
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUPS, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
8/7/2013
18273267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF33; transimssio RNC n type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL. When the interface
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
30
30
RNC
None
Not involved
Not involved
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
18283267
162734118.xls.ms_office1
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). When [PARA]CN ProtclVer[/ PARA] in [MML]AD D CNNODE[/ MML] is set to R5 or any later version, PsNriCfgM ode may be set to SUPP_IUF LEX.The parameter modificatio n has no impact on the equipment. When [PARA]CN ProtclVer[/ PARA] in [MML]AD D CNNODE[/ MML] is set to R6 or any later
None
30
30
RNC
None
Not involved
Not involved
None
100
100
RNC
None
Not involved
Not involved
None
SUPP_NO NE
RNC
None
Not involved
Not involved
8/7/2013
18293267
162734118.xls.ms_office1
The settings of PSNRILeng th is valid only when the value of [PARA]Ps NriCfgMod e[/PARA] in [MML]SET OPERATO RCFGPAR A[/MML] is set to SUPP_IUF LEX, SUPP_MO CN or SUPP_IUF LEX_MOC N.The parameter modificatio n has no impact on the
None
None
RNC
PSNRILeng th needs to be set when [PARA]PsI uFlexFlag[/ PARA] in [MML]SET IUFLEX[/ MML] is set to ON; PSNRILeng th does not need to be set when [PARA]PsI uFlexFlag[/ PARA] in [MML]SET IUFLEX[/ MML] is set to OFF.
Not involved
Not involved
None
40
RNC
None
Not involved
Not involved
8/7/2013
18303267
162734118.xls.ms_office1
None
100
RNC
None
Not involved
Not involved
None
60
RNC
None
Not involved
Not involved
None
200
RNC
None
Not involved
Not involved
8/7/2013
18313267
162734118.xls.ms_office1
When [PARA]Dsa cAutoSwitc h[/PARA] is set to ON,the parameter need configure;el se,need not configure.
None
Not involved
Not involved
None
OFF
OFF
Cell
None
Not involved
Not involved
8/7/2013
18323267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
100
100
RNC
None
Not involved
Not involved
8/7/2013
18333267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is AF43. RNC When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is AF43. When the interface type is Iu-
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUPS, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
18343267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is AF43; transimssio RNC n type is Hybird IP, the parameter is LQAF43. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL. When the interface
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
None
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
18353267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
100
100
RNC
None
Not involved
Not involved
8/7/2013
18363267
162734118.xls.ms_office1
PS_BE_EX TRA_LOW _RATE_AC CESS_SWI TCH:OFF, PS_BE_INI T_RATE_D YNAMIC_ CFG_SWIT CH:OFF,PS _BE_IU_Q OS_NEG_S WITCH:OF F,PS_RAB_ DOWNSIZI NG_SWIT RNC CH:ON, PS_RSC_F EEDBK_R ABSETUP_ CACFAIL_ SWITCH:O FF, PS_STREA M_IU_QOS _NEG_SWI TCH:OFF, PS_BE_ST RICT_IU_ QOS_NEG _SWITCH: OFF
None
Not involved
Not involved
kbit/s
None
RNC
None
Not involved
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.
None
None
SRB
None
Not involved
Not involved
Not involved
8/7/2013
18373267
162734118.xls.ms_office1
The first byte in the IP address of the NodeB FE port cannot be 0 or 127, or the IP address cannot be a broadcast or multicast address. The IP address of the NodeB FE port and the internal network address of the BAM cannot belong to the same network segment, or the network segments that they belong to cannot contain each
None
None
RNC
When the value of [PARA]US EFE[/PAR A] in [MML]AD D NODEBES N[/MML] is set to Enable, this parameter should be set.
Not involved
Not involved
8/7/2013
18383267
162734118.xls.ms_office1
The first byte in the IP address of the NodeB FE port cannot be 0 or 127, or the IP address cannot be a broadcast or multicast address. The IP address of the NodeB FE port and the internal network address of the BAM cannot belong to the same network segment, or the network segments that they belong to cannot contain each
None
None
RNC
When the value of [PARA]US EFE[/PAR A] in [MML]AD D NODEBES N[/MML] is set to Enable, this parameter should be set.
Not involved
Not involved
8/7/2013
18393267
162734118.xls.ms_office1
None
ON
RNC
None
Not involved
Not involved
None
OFF
RNC
None
Not involved
Not involved
8/7/2013
18403267
162734118.xls.ms_office1
None
ON
RNC
None
Not involved
Not involved
None
None
Ethernet port
When the value of [PARA]BR DTYPE[/P ARA] in [MML]SET ETHPORT[ /MML] is set to FG2a, the port type should be set.
Not involved
Not involved
None
32
RNC
None
Not involved
Not involved
8/7/2013
18413267
162734118.xls.ms_office1
When [PARA]Cho iceRprtUnit ForDlBasic Meas[/PAR A] is set to MIN,the value of this parameter must satisfy the following relationship: [PARA]Puc PeriodTime rLen[/PAR A] > 2 x 60 x [PARA]Mi nForDlBasi cMeas[/PA RA]; When [PARA]Cho iceRprtUnit ForDlBasic Meas[/PAR A] is set to TEN_MSE C,the value of this parameter
1800
RNC
Not involved
Not involved
10
RNC
None
Not involved
Not involved
8/7/2013
18423267
162734118.xls.ms_office1
None
None
Not involved
Not involved
None
None
From [PARA]Q0 MINDSCP[ /PARA] to [PARA]Q4 MINDSCP[ /PARA] must obey the following rules: [PARA]Q0 MINDSCP[ Port Queue /PARA] > [PARA]Q1 MINDSCP[ /PARA] > [PARA]Q2 MINDSCP[ /PARA] > [PARA]Q3 MINDSCP[ /PARA] > [PARA]Q4 MINDSCP[ /PARA].
Not involved
Not involved
The priority of the correspondi ng service will be interrupt if the DSCP of the port's queue is modified.
8/7/2013
18433267
162734118.xls.ms_office1
From [PARA]Q0 MINDSCP[ /PARA] to [PARA]Q4 MINDSCP[ /PARA] must obey the following rules: [PARA]Q0 MINDSCP[ Port Queue /PARA] > [PARA]Q1 MINDSCP[ /PARA] > [PARA]Q2 MINDSCP[ /PARA] > [PARA]Q3 MINDSCP[ /PARA] > [PARA]Q4 MINDSCP[ /PARA]. From [PARA]Q0 MINDSCP[ /PARA] to [PARA]Q4 MINDSCP[ /PARA] must obey the following rules: [PARA]Q0 MINDSCP[ Port Queue /PARA] > [PARA]Q1 MINDSCP[ /PARA] > [PARA]Q2 MINDSCP[ /PARA] > [PARA]Q3 MINDSCP[ /PARA] > [PARA]Q4 MINDSCP[ /PARA].
None
None
Not involved
Not involved
The priority of the correspondi ng service will be interrupt if the DSCP of the port's queue is modified.
None
None
Not involved
Not involved
The priority of the correspondi ng service will be interrupt if the DSCP of the port's queue is modified.
8/7/2013
18443267
162734118.xls.ms_office1
From [PARA]Q0 MINDSCP[ /PARA] to [PARA]Q4 MINDSCP[ /PARA] must obey the following rules: [PARA]Q0 MINDSCP[ Port Queue /PARA] > [PARA]Q1 MINDSCP[ /PARA] > [PARA]Q2 MINDSCP[ /PARA] > [PARA]Q3 MINDSCP[ /PARA] > [PARA]Q4 MINDSCP[ /PARA]. From [PARA]Q0 MINDSCP[ /PARA] to [PARA]Q4 MINDSCP[ /PARA] must obey the following rules: [PARA]Q0 MINDSCP[ Port Queue /PARA] > [PARA]Q1 MINDSCP[ /PARA] > [PARA]Q2 MINDSCP[ /PARA] > [PARA]Q3 MINDSCP[ /PARA] > [PARA]Q4 MINDSCP[ /PARA].
None
None
Not involved
Not involved
The priority of the correspondi ng service will be interrupt if the DSCP of the port's queue is modified.
None
None
Not involved
Not involved
The priority of the correspondi ng service will be interrupt if the DSCP of the port's queue is modified.
8/7/2013
18453267
162734118.xls.ms_office1
When the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to IUB, IUR, or IUCS, and the value of [PARA]IsR OOTNODE [/PARA] in [MML]AD D ADJNODE[ /MML] is set to YES, or the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to UNI_AAL2
When this parameter is set to CS1, the local end of the RNC uses the protocol version of CS1 to interconnect with this adjacent node; when this parameter is set to CS2, the local end of the RNC uses the protocol version of CS2 to interconnect with this adjacent node. CS2 is backward compatible with CS1 and therefore it is
None
CS2
CS2
Adjacent Node
Not involved
Not involved
8/7/2013
18463267
162734118.xls.ms_office1
This parameter is valid only when [PARA]Use OfHcs[/PA RA] is set to USED. This paramter is valid only when [PARA]Use OfHcs[/PA RA] is set to USED. This parameter is valid only when [PARA]Use OfHcs[/PA RA] is set to TRUE.
None
20
20
Not involved
Not involved
dB
255
255
Cell
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
18473267
162734118.xls.ms_office1
dB
255
255
Cell
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
dB
255
255
Cell
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
18483267
162734118.xls.ms_office1
dB
255
255
Cell
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
18493267
162734118.xls.ms_office1
dB
Cell
None
N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to choose to the GSM neighbourin Not g cell in cell involved reselection process. On the other hand. the smaller the value is, the higher the possibility for the UE to choose the GSM neighbourin g cell.)
Not involved
8/7/2013
18503267
162734118.xls.ms_office1
dB
This parameter is valid only when [PARA]Qq ualminInd[/ PARA] is set to TRUE.
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
None
FALSE
FALSE
RNC
None
N (For the UE in idle mode, the parameter Not will impact involved the UE whether it can camp on the cell.)
Not involved
8/7/2013
18513267
162734118.xls.ms_office1
dBm
This parameter is valid only when [PARA]Qrx levminInd[/ PARA] is set to TRUE.
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
18523267
162734118.xls.ms_office1
N(For the UE in idle mode, the larger the value of this parameter is, the harder the UE to reselect to this cell based on HCS algorithm. On the other hand. the Not smaller the involved value is, the easier the UE to reselect to this cell. But if the value is to small, the UE may not receive the systerm information on PCCPCH channel
dBm
-50
-50
Cell
None
Not involved
None
FALSE
FALSE
This parameter is valid only when [PARA]Qrx levminInd[/ PARA] is set to TRUE.
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
18533267
162734118.xls.ms_office1
None
FALSE
FALSE
RNC
None
N (For the UE in idle mode, the parameter Not will impact involved the UE whether it can camp on the cell.)
Not involved
None
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
None
OFF
RNC
None
Not involved
Not involved
8/7/2013
18543267
162734118.xls.ms_office1
None
RNC
None
Not involved
Not involved
None
None
RAB(ADD TYPRABO LPC) (ADD TYPRABB ASIC,ADD TYPRABH SPA,ADD None. TYPRABR LC,ADD TYPRABD CCCMC) RNC(ADD TYPRABQ UALITYM EAS)
Not involved
Not involved
8/7/2013
18553267
162734118.xls.ms_office1
RNC
None
Not involved
Not involved
None
None
RNC(ADD NRNCCEL L,ADD QUICKCE LLSETUP, ADD CELLSETU P,ADD RAC) Cell(ADD GSMCELL)
This paramter is valid only when Not [PARA]Cfg involved RacInd[/PA RA] is set to REQUIRE.
Not involved
Not involved
8/7/2013
18563267
162734118.xls.ms_office1
None
SELECT ALL
Physical channel
None
Not involved
8/7/2013
18573267
162734118.xls.ms_office1
ms
30000
RNC
None
Not involved
Not involved
The value of RafcTmr can be negotiated with the value of [PARA]Rat cTmr[/PAR A] in [MML]SET IUTIMERA NDNUM[/ MML]; thus, the RNC can successfully initiate the reset before the CN reset response timer expires.The parameter modificatio n has no impact on the equipment. If the RAN Sharing Support and MOCN Support are both switched off,Redunda nt operators should be removed by [MML]RM V CNOPERA TOR[/MML ] and only one operator can exist.
None
NO
RNC
None
Not involved
Not involved
8/7/2013
18583267
162734118.xls.ms_office1
None
None
Cell
None
Not involved
Not involved
ms
120000
RNC
None
Not involved
Not involved
The value of RatcTmr can be negotiated with the value of [PARA]Raf cTmr[/PAR A] in [MML]SET IUTIMERA NDNUM[/ MML]; thus, the CN can successfully initiate the reset before the RNC reset response timer expires.The parameter modificatio n has no impact on the equipment.
8/7/2013
18593267
162734118.xls.ms_office1
None
230(ADD 230(ADD PCH,ADD PCH,ADD Transport FACH) FACH) channel 1(ADD 1(ADD RACH) RACH)
None
Not involved
Not involved
Not involved
ms
5000
5000
Cell
None
Not involved
Not involved
8/7/2013
18603267
162734118.xls.ms_office1
per cent
68
68
Cell
None
Not involved
Not involved
8/7/2013
18613267
162734118.xls.ms_office1
ms
3000
3000
Cell
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
18623267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
ms
5000
RNC
None
Not involved
Not involved
The retransmit mechanism is used if the signaling is sent by adopting RLC UM on Uu interface during channel handover.In this case, the setting of the correspondi ng waiting response timer for UE reconfigurat ion does not work. (For example, when the channel change form DCH to FACH or the channel
8/7/2013
18633267
162734118.xls.ms_office1
The retransmit mechanism is used if the signaling is sent by adopting RLC UM on Uu interface during channel handover.In this case, the setting of the correspondi ng waiting response timer for UE release does not work. (For example, when the channel change form DCH to FACH or the channel change from
ms
5000
RNC
None
Not involved
Not involved
8/7/2013
18643267
162734118.xls.ms_office1
The retransmit mechanism is used if the signaling is sent by adopting RLC UM on Uu interface during channel handover.In this case, the setting of the correspondi ng waiting response timer for UE setup does not work. (For example, when the channel change form DCH to FACH or the channel change from
ms
5000
RNC
None
Not involved
Not involved
per cent
96
96
LGC port
When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set.
Not involved
Not involved
8/7/2013
18653267
162734118.xls.ms_office1
The value of this parameter must be larger than the value of the [PARA]Up LimitCounti ngTime[/PA RA] parameter under the [MML]SET RNCMBM SPARA[/M ML] command.
RNC
Not involved
Not involved
per cent
130
130
Cell
None
Not involved
Not involved
8/7/2013
18663267
162734118.xls.ms_office1
1.When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set. 2.[PARA]R ECOVERT HD[/PARA ] must be larger than [PARA]RP TTHD[/PA RA]. None
per cent
30
30
LGC port
Not involved
Not involved
None
None
Board
Not involved
Not involved
Not involved
8/7/2013
18673267
162734118.xls.ms_office1
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the parameter set through the [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command. This parameter is valid when
None
DependOn NCell(ADD CELLDRD, SET DRD) None(ADD CELLREDI RECTION, DependOn SET NCell(ADD REDIRECT CELLDRD) ION)
Not involved
Not involved
8/7/2013
18683267
162734118.xls.ms_office1
This parameter is valid when [PARA]Red irSwitch[/P ARA] is set to ONLY_TO _INTER_F REQUENC Y or ONLY_TO _INTER_R AT. 1. This parameter is valid when [PARA]Red irSwitch[/P ARA] is set to ONLY_TO _INTER_F REQUENC Y or ONLY_TO _INTER_R AT. 2. If the value of this parameter is set in both
per cent
AMR:100; Other:0(SE T RNC(SET REDIRECT REDIRECT ION) ION) Cell(ADD AMR:100; CELLREDI Other:0(AD RECTION) D CELLREDI RECTION)
Not involved
Not involved
8/7/2013
18693267
162734118.xls.ms_office1
This parameter is valid when [PARA]Red irSwitch[/P ARA] is set to ONLY_TO _INTER_F REQUENC Y or ONLY_TO _INTER_R AT. 1. This parameter is valid when [PARA]Red irSwitch[/P ARA] is set to ONLY_TO _INTER_F REQUENC Y or ONLY_TO _INTER_R AT. 2. If the value of this parameter is set in both
per cent
Not involved
Not involved
8/7/2013
18703267
162734118.xls.ms_office1
None
None
Not involved
Not involved
8/7/2013
18713267
162734118.xls.ms_office1
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the parameter set through the [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command; The value range of this parameter
None
None
Not involved
Not involved
8/7/2013
18723267
162734118.xls.ms_office1
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the parameter set through the [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command; This parameter is required
None
None
Not involved
Not involved
8/7/2013
18733267
162734118.xls.ms_office1
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the parameter set through the [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command. This parameter is valid when
None
None
Not involved
Not involved
8/7/2013
18743267
162734118.xls.ms_office1
When the value of [PARA]BT[ /PARA] in [MML]SET CLK[/MML ] is set to AEUa/PEU a, the value range of [PARA]RE F2MCLKS RC[/PARA] is 0 to 31. When the value of Y [PARA]BT[ /PARA] in [MML]SET CLK[/MML ] is set to AOUa/POU a, the value range of [PARA]RE F2MCLKS RC[/PARA] is 0 to 1. When the value of [PARA]BT[ /PARA] in
None
None
board
RNC
When you set the clock source for the AEUa and the PEUa, the link number can be 0 to Less than 5 31; for the minutes AOUa, the link number can be 0 or 1; for the UOIa, the link number can be 0 to 3.
8/7/2013
18753267
162734118.xls.ms_office1
When the value of [PARA]BT[ /PARA] in [MML]SET CLK[/MML ] is set to AEUa/PEU a, the value range of [PARA]RE F2MCLKS RC[/PARA] is 0 to 31. When the value of [PARA]BT[ /PARA] in [MML]SET CLK[/MML ] is set to AOUa/POU a, the value range of [PARA]RE F2MCLKS RC[/PARA] is 0 to 1. When the value of [PARA]BT[ /PARA] in
None
None
board
RNC
Not involved
When you set the clock source for the AEUa and the PEUa, the link number can be 0 to 31; for the AOUa, the link number can be 0 or 1; for the UOIa, the link number can be 0 to 3.
None
None
board
None
RNC
This Less than 5 parameter minutes cannot be modified. This Less than 5 parameter minutes cannot be modified.
None
None
board
None
RNC
None
ON
RNC
None
Not involved
Not involved
8/7/2013
18763267
162734118.xls.ms_office1
None
None
Not involved
Not involved
ms
3000
RNC
None
Not involved
Not involved
ms
5000
RNC
None
Not involved
Not involved
ms
10000
RNC
None
Not involved
Not involved
The modificatio n of the timer involves the peer end. For details, refer to ITUT Q2630.1/IT U-T Q2630.2. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
8/7/2013
18773267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
ms
15000
RNC
None
Not involved
Not involved
ms
20000
RNC
None
Not involved
Not involved
ms
3000
RNC
None
Not involved
Not involved
ms
45000
RNC
None
Not involved
Not involved
ms
5000
RNC
None
Not involved
Not involved
ms
5000
RNC
None
Not involved
Not involved
ms
10000
RNC
None
Not involved
Not involved
8/7/2013
18783267
162734118.xls.ms_office1
The modificatio n of the timer involves the peer end. For details, refer to ITUT Q2630.1/IT U-T Q2630.2.
ms
5000
RNC
None
Not involved
Not involved
dB
RNC
None
Not involved
Not involved
8/7/2013
18793267
162734118.xls.ms_office1
IP Route(ADD IPRT) SAALLNK/ AAL3PAT H/IPOAPV None C/VPCLCX using this ATM traffic record index(ADD ATMTRF)
None
None
Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
RNC
None
Not involved
Not involved
300
RNC
None
Not involved
Not involved
8/7/2013
18803267
162734118.xls.ms_office1
ms
Not involved
Not involved
8/7/2013
18813267
162734118.xls.ms_office1
ms
Not involved
Not involved
8/7/2013
18823267
162734118.xls.ms_office1
ms
Not involved
Not involved
8/7/2013
18833267
162734118.xls.ms_office1
None
None
RAB
None.
Not involved
Not involved
8/7/2013
18843267
162734118.xls.ms_office1
RESERVE D_SWITC H_0_BIT1: OFF, RESERVE D_SWITC H_0_BIT2: OFF, RESERVE D_SWITC H_0_BIT3: OFF, RESERVE D_SWITC H_0_BIT4: OFF, RNC RESERVE D_SWITC H_0_BIT5: OFF, RESERVE D_SWITC H_0_BIT6: OFF, RESERVE D_SWITC H_0_BIT7: OFF, RESERVE D_SWITC H_0_BIT8: OFF,
None
None
Not involved
Not involved
8/7/2013
18853267
162734118.xls.ms_office1
RESERVE D_SWITC H_1_BIT1: ON, RESERVE D_SWITC H_1_BIT2: ON, RESERVE D_SWITC H_1_BIT3: ON, RESERVE D_SWITC H_1_BIT4: ON, RNC RESERVE D_SWITC H_1_BIT5: ON, RESERVE D_SWITC H_1_BIT6: ON, RESERVE D_SWITC H_1_BIT7: ON, RESERVE D_SWITC H_1_BIT8: ON,
None
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
None
4294967295 RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
8/7/2013
18863267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The modificatio n of the timer involves the peer end. For details, refer to ITUT Q2630.1/IT U-T Q2630.2. The negotiation will be successful only when the parameter is set the same with the local and peer device. The parameter modificatio n has no impact on the equipment.
None
255
RNC
None
Not involved
Not involved
ms
5000
RNC
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
8/7/2013
18873267
162734118.xls.ms_office1
This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA.
None
RAB
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
8/7/2013
18883267
162734118.xls.ms_office1
None
None
RAB
None.
Not involved
Not involved
bit
None
Transport channel
None
Not involved
Not involved
Not involved
8/7/2013
18893267
162734118.xls.ms_office1
dB
None
Cell
The value of this parameter must not be smaller than [PARA]Rl MinDlPwr[/ PARA].
Not involved
Not involved
8/7/2013
18903267
162734118.xls.ms_office1
dB
None
Cell
The value of this parameter must not be larger than [PARA]Rl MaxDlPwr[ /PARA].
Not involved
Not involved
ms
5000
RNC
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
ms
5000
RNC
None
Not involved
Not involved
ms
10000
RNC
None
Not involved
Not involved
8/7/2013
18913267
162734118.xls.ms_office1
ms
5000
RNC
None
Not involved
Not involved
None
None
RNC(ADD GPS,ADD RNCBASIC ,RST IUR,ADD GSMNCEL L,ADD INTERFRE QNCELL,A DD INTRAFRE None QNCELL,A DD CELLINTR AFREQHO ) Cell(ADD SMLCCEL L) (RST RNC)
Not involved
Not involved
Not involved
None
None
Subsystem
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
18923267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
per cent
20
20
LGC port
1.When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set. 2.[PARA]R ECOVERT HD[/PARA ] must be larger than [PARA]RP TTHD[/PA RA].
Not involved
Not involved
8/7/2013
18933267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
None
200
RNC
None
Not involved
Not involved
8/7/2013
18943267
162734118.xls.ms_office1
None
60
RNC
None
Not involved
Not involved
RNC
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
ms
5000
RNC
None
Not involved
Not involved
ms
5000
RNC
None
Not involved
Not involved
ms
5000
RNC
None
Not involved
Not involved
ms
350
RNC
None
Not involved
Not involved
8/7/2013
18953267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
ms
1000
RNC
None
Not involved
Not involved
ms
5000
RNC
None
Not involved
Not involved
ms
5000
RNC
None
Not involved
Not involved
None
None
None
None
When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D AAL2PAT AAL2 Path Y H[/MML] is set to UNI, IMA, FRAATM, or NCOPT, this parameter is valid. When the value of [PARA]RS CGRPFLA G[/PARA] in [MML]AD D AAL2 Path Y AAL2PAT H[/MML] is set to YES, this parameter is valid; the type of rscgrp must
The parameter modificatio Less than 5 AAL2 Path n has no minutes impact on the equipment.
The Less than 5 resource AAL2 Path minutes group must exist.
8/7/2013
18963267
162734118.xls.ms_office1
When the value of [PARA]CA RRYFLAG[ /PARA] in [MML]AD D IPPATH[/ Y MML] is set to RSCGRP, this parameter is valid;the type of rscgrp must N (No impact on the UE in idle mode)
None
None
IP Path
IP Path
None
SHARE
SHARE
NodeB
None
Not involved
Not involved
None
None
When [PARA]ISF IRSTCLAS SE[/PARA] in [MML]AD Not D involved RSCGRP[/ Transmissio MML] is set n resource to YES, this group(ADD parameter is RSCGRP) valid.
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
18973267
162734118.xls.ms_office1
Modifying this parameter may affect the sensitivity of SAAL link detection.
ms
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
OFF
OFF
RNC
When the value of [PARA]SP CBITS[/PA RA] is set Y to BIT14 or BIT24, this parameter is valid.
Not involved
Not involved
After modificatio n, the RNC should be reset. When a single link is routed to a signaling point, do not enable this switch. The restart procedure is performed when a signaling point is unavailable. For details, refer to ITUT Q704. The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
18983267
162734118.xls.ms_office1
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
8/7/2013
18993267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
8/7/2013
19003267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
8/7/2013
19013267
162734118.xls.ms_office1
Cell(ADD CELLALG OSWITCH) NodeB(AD D None NODEBAL GOPARA) RNC(SET CACALGO SWITCH) N (No impact on the UE in idle mode) Not involved Not involved
None
None
None
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
Change this parameter will impact the function interrelated with Parameter 1. The parameter modificatio n has no impact on the equipment.
8/7/2013
19023267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Change this parameter will impact the function interrelated with Parameter 10. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
8/7/2013
19033267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
None
Cell(ADD CELLALG OSWITCH) NodeB(AD None D NODEBAL GOPARA) RNC(SET CACALGO SWITCH) N (No impact on the UE in idle mode) Not involved Not involved
None
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
Change this parameter will impact the function interrelated with Parameter 2. The parameter modificatio n has no impact on the equipment.
8/7/2013
19043267
162734118.xls.ms_office1
Cell(ADD CELLALG OSWITCH) NodeB(AD None D NODEBAL GOPARA) RNC(SET CACALGO SWITCH) N (No impact on the UE in idle mode) Not involved Not involved
None
None
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Change this parameter will impact the function interrelated with Parameter 3. The parameter modificatio n has no impact on the equipment. Change this parameter will impact the function interrelated with Parameter 4. The parameter modificatio n has no impact on the equipment. Change this parameter will impact the function interrelated with Parameter 5.
8/7/2013
19053267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. Change this parameter will impact the function interrelated with Parameter 6. The parameter modificatio n has no impact on the equipment. Change this parameter will impact the function interrelated with Parameter 7. The parameter modificatio n has no impact on the equipment. Change this parameter will impact the function interrelated with Parameter 8. The parameter modificatio n has no impact on the equipment.
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
8/7/2013
19063267
162734118.xls.ms_office1
Change this parameter will impact the function interrelated with Parameter 9. The value of this parameter should be consistent with the peer one.
None
None
RNC
None
Not involved
Not involved
None
None
Port
None
Port
None
None
RNC
The negotiation with the peer end is The required. It services are is interrupted recommend until the ed that this related parameter M3DE is should not available. be modified during network operation. The modificatio n of RTCPBWR atio is valid only when [PARA]RT CPSwitch[/ PARA] in [MML]AD D CNNODE[/ MML] is set to ON.The parameter modificatio n has no impact on the equipment.
None
RNC
When [PARA]RT CPSwitch[/ PARA] in [MML]AD D CNNODE[/ MML] is set to ON, RTCPBWR atio needs to be set.
Not involved
Not involved
8/7/2013
19073267
162734118.xls.ms_office1
180
RNC
None
Not involved
Not involved
8/7/2013
19083267
162734118.xls.ms_office1
180
RNC
None
Not involved
Not involved
8/7/2013
19093267
162734118.xls.ms_office1
None
OFF
RNC
When [PARA]Tnl BearerType [/PARA] in [MML]AD D CNNODE[/ MML] is set to IP_TRANS, RTCPSwitc h needs to be set.
Not involved
Not involved
The modificatio n of RTCPSwitc h is valid only when [PARA]Tnl BearerType [/PARA] in [MML]AD D CNNODE[/ MML] is set to IP_TRANS. The parameter modificatio n has no impact on the equipment.
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
8/7/2013
19103267
162734118.xls.ms_office1
180
RNC
None
Not involved
Not involved
8/7/2013
19113267
162734118.xls.ms_office1
180
RNC
None
Not involved
Not involved
ms
D16000
RNC
This parameter is valid when DRA_PS_N ON_BE_ST ATE_TRA NS_SWITC H and DRA_HSD PA_STATE _TRANS_S WITCH in [MML]SET CORRMAL GOSWITC H[/MML] are set to ON.
Not involved
Not involved
8/7/2013
19123267
162734118.xls.ms_office1
The following relationship must be satisfied: [PARA]Rt DH2FTvmT hd[/PARA] < [PARA]RtF 2DHTvmTh d[/PARA]; [PARA]Rt DH2FTvmT hd[/PARA] < [PARA]RtE Fach2DHTv mThd[/PAR A]; [PARA]Rt DH2FTvmT hd[/PARA] < [PARA]RtE Fach2CpcT vmThd[/PA RA]; [PARA]Rt DH2FTvmT hd[/PARA] This parameter is valid when DRA_PS_N ON_BE_ST ATE_TRA NS_SWITC H and DRA_HSD PA_STATE _TRANS_S WITCH in [MML]SET CORRMAL GOSWITC H[/MML] are set to ON.
byte
D64
RNC
Not involved
Not involved
ms
D5000
RNC
Not involved
Not involved
8/7/2013
19133267
162734118.xls.ms_office1
byte
D1024
RNC
The following relationship must be satisfied: [PARA]Rt DH2FTvmT hd[/PARA] < [PARA]RtE Fach2CpcT vmThd[/PA RA].
Not involved
Not involved
ms
D0
RNC
None
Not involved
Not involved
8/7/2013
19143267
162734118.xls.ms_office1
byte
D1024
RNC
The following relationship must be satisfied: [PARA]Rt DH2FTvmT hd[/PARA] < [PARA]RtE Fach2DHTv mThd[/PAR A].
Not involved
Not involved
ms
D0
RNC
None
Not involved
Not involved
8/7/2013
19153267
162734118.xls.ms_office1
byte
D1024
RNC
The following relationship must be satisfied: [PARA]Rt DH2FTvmT hd[/PARA] < [PARA]RtF 2CpcTvmT hd[/PARA].
Not involved
Not involved
ms
D0
RNC
None
Not involved
Not involved
8/7/2013
19163267
162734118.xls.ms_office1
byte
D1024
RNC
The following relationship must be satisfied: [PARA]Rt DH2FTvmT hd[/PARA] < [PARA]RtF 2DHTvmTh d[/PARA].
Not involved
Not involved
ms
D0
RNC
None
Not involved
Not involved
8/7/2013
19173267
162734118.xls.ms_office1
per cent
12
12
SCTP
None
Not involved
Not involved
per cent
25
25
SCTP
None
Not involved
Not involved
ms
1000
1000
SCTP
The value to be set should be larger than the value of [PARA]RT OMIN[/PA RA] in [MML]AD D SCTPLNK[ /MML] but smaller than the value of [PARA]RT OMAX[/PA RA].
Not involved
Not involved
8/7/2013
19183267
162734118.xls.ms_office1
The value to be set should be larger than the value of [PARA]RT OMIN[/PA RA] in [MML]AD D SCTPLNK[ /MML]. The value to be set should be smaller than the value of [PARA]RT OMAX[/PA RA] in [MML]AD D SCTPLNK[ /MML].
ms
3000
3000
SCTP
Not involved
Not involved
ms
1000
1000
SCTP
Not involved
Not involved
None
None
kbit/s
Services carried on the network element None with the specific ATM address. When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D LGC port IPLOGICP ORT[/MML ] is set to ON, this parameter should be set.
Not involved
Not involved
Not involved
Not involved
Not involved
8/7/2013
19193267
162734118.xls.ms_office1
When the value of [PARA]BW ADJ[/PAR A] in [MML]AD D IPLOGICP ORT[/MML ] is set to ON, this parameter should be set.
ms
LGC port
Not involved
Not involved
kbit/s
None
LGC port
None
Not involved
Not involved
This parameter cannot be modified. The parameter modificatio n has no impact on the equipment.
kbit/s
None
IP Path
None
Not involved
Not involved
8/7/2013
19203267
162734118.xls.ms_office1
When [PARA]GR PT[/PARA] in [MML]AD D RSCGRP[/ MML] is set to ATM or [PARA]BW MODE[/PA RA] is set to FULL_DUP LEX, this Transmissio parameter is n resource valid;The group sum of [PARA]Tx Bw[/PARA] and [PARA]Rx Bw[/PARA] in [MML]AD D RSCGRP[/ MML] of upper class RSCGRP can not less than the
kbit/s
None
Not involved
Not involved
8/7/2013
19213267
162734118.xls.ms_office1
When the value of [PARA]CA RRYT[/PA RA] is set to IMA, UNI, FRAATM, NCOPT, or ATMLGCP ORT, this parameter is valid. When the value of [PARA]CA Y RRYT[/PA RA] in [MML]AD D AAL2PAT H[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is valid. 1.When the value of
None
None
SAAL(AD D SAALLNK) AAL2 Path(ADD AAL2PAT H) RNC(ADD VPCLCX) IPoA PVC(ADD IPOAPVC)
Not involved
Not involved
8/7/2013
19223267
162734118.xls.ms_office1
chip
1172
RNC
The value of the parameter must satisfy the function below: [PARA]Rx TxtoTrig6F[ /PARA] [PARA]Rx TxtoTrig6G [/PARA] >= 256.
Not involved
Not involved
8/7/2013
19233267
162734118.xls.ms_office1
chip
876
RNC
The value of the parameter must satisfy the function below: [PARA]Rx TxtoTrig6F[ /PARA] [PARA]Rx TxtoTrig6G [/PARA] >= 256.
Not involved
Not involved
None
None
SAAL
When [PARA]CA RRYLNKT [/PARA] is Not SAAL or involved SAALSCTP, this parameter is valid. When[PAR A]CARRY LNKT[/PA Not RA] is involved SAAL or SAALSCTP, this parameter is
Not involved
Not involved
None
None
SAAL
Not involved
Not involved
8/7/2013
19243267
162734118.xls.ms_office1
When the value of [PARA]LN KT[/PARA] in [MML]AC T VCLCC[/M ML] is set to SAALLNK, the SAAL link number should be Not set. involved When the value of [PARA]LN KT[/PARA] in [MML]LOP VCL[/MML ] is set to SAALLNK, the value of [PARA]SA ALLNKN[/ PARA] should be
None
None
SAAL
Not involved
Not involved
8/7/2013
19253267
162734118.xls.ms_office1
When the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to IUB, and the value of [PARA]IsR Adjacent OOTNODE Node(ADD [/PARA] in ADJNODE) [MML]AD Y D MTP3(AD ADJNODE[ D /MML] is MTP3LNK) set to YES, or the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to UNI_AAL2 SWITCH,
None
None
NodeB
For the Iub adjacent node, the SAAL link Less than 5 should stay minutes in the same subsystem as the NodeB.
None
None
SAAL
None
Not involved
Not involved
Not involved
ms
None
MTP3B
None
RNC
Not involved
8/7/2013
19263267
162734118.xls.ms_office1
None
None
RNC
The value of this parameter is dependent on the value of [PARA]SA C[/PARA] in Not [MML]AD involved D SAC[/MML ]; This service area is not configured as a classified zone.
Not involved
Not involved
None
False
False
NodeB
None
Not involved
Not involved
8/7/2013
19273267
162734118.xls.ms_office1
chip
50
50
Physical channel
None
Not involved
Not involved
Not involved
8/7/2013
19283267
162734118.xls.ms_office1
1.When the value of [PARA]ST[ /PARA] in [MML]AD D ATMTRF[/ MML] is set to RTVBR or NRTVBR and Not [PARA]UT involved [/PARA] is selected, this parameter should be set. 2.[PARA]S CR[/PARA] must be smaller than [PARA]PC R[/PARA].
None
None
SAALLNK/ AAL2PAT H/IPOAPV C/VPCLCX using this ATM traffic record index
Not involved
Not involved
None
None
Physical channel
None
Not involved
Not involved
Not involved
8/7/2013
19293267
162734118.xls.ms_office1
When the value of [PARA]BT[ /PARA] in [MML]SET E1T1[/MM L] is set to AEUa or AOUa, the value of [PARA]SC RAMBLES W[/PARA] can be set. When the value of [PARA]BT[ /PARA] in [MML]SET OPT[/MML ] is set to UOIa and the logic function type is selected,the scramble switch should be set. The parameter [PARA]SC TPLNKN[/ PARA] in [MML]AD D SCTPLNK[ /MML] When [PARA]CA RRYLNKT [/PARA] is SCTP or SAALSCTP, this parameter is valid.
Not involved
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
8/7/2013
19303267
162734118.xls.ms_office1
1.You can set the DST start date or end date by setting the StartType or EndType parameter to "DATEWE EK" type. In this case, you must set the Interrupt benchmark the service day to (n until the 6) or earlier, parameter is where n correctly represents set. the last day of the month. For example, in October, you must set the benchmark day to 25 (= 31 - 6) or earlier. If you set the date to "Tuesday in This Not parameter involved cannot be modified. Not involved This parameter cannot be modified. The parameter modificatio n has no impact on the equipment.
None
None
RNC
When the value of [PARA]DS T[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of Y [PARA]SM [/PARA] in [MML]SET TZ[/MML] is set to DATE or DATEWEE K, the start date should be set.
RNC
None
DISABLE
Port
None
Not involved
Not involved
None
None
Port
None
Not involved
Not involved
None
None
NodeB
None
Not involved
Not involved
8/7/2013
19313267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The negotiation will be successful only when the parameter is set the same with the local and peer device.
None
ALL
ALL
RNC
None
Not involved
Not involved
Not involved
None
MBMS service
MBMS service
Cell
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
PPP Link
None
Not involved
Not involved
Not involved
kbit/s
None
Cell(ADD CELLMBM SFACH,AD D CELLMBM SSCCPCH) None RNC(SET MTCH,SET MBMSFAC H,SET MBMSSCC PCH)
Not involved
Not involved
Not involved
8/7/2013
19323267
162734118.xls.ms_office1
If this parameter is set through both the [MML]AD D CELLDRD[ /MML] and [MML]SET DRD[/MM L] commands, the RNC(SET parameter DRD) set through Cell(ADD the CELLDRD) [MML]AD D CELLDRD[ /MML] command takes precedence over that set through the [MML]SET DRD[/MM L] command.
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
None
RNC
None
Not involved
Not involved
8/7/2013
19333267
162734118.xls.ms_office1
None
None
Cell(ADD CELLMBM SFACH,AD D CELLMBM SSCCPCH) None RNC(SET MTCH,SET MBMSFAC H,SET MBMSSCC PCH)
Not involved
Not involved
Not involved
None
None
Adjacent Node
When the value of [PARA]NO DET[/PAR A] in [MML]AD Not D involved ADJNODE[ /MML] is set to IUPS, this parameter is valid. The value of this parameter must satisfy the following relationship: [PARA]Ma xCAPSLow Load[/PAR A] > [PARA]Ma xCAPSMid Load[/PAR A] > [PARA]Sha ringOutCA PSMidLoad [/PARA].
Not involved
Not involved
None
10
RNC
Not involved
Not involved
8/7/2013
19343267
162734118.xls.ms_office1
None
DEDICATE NodeB D
None
Not involved
Not involved
dB
Cell
This parameter is required when the [PARA]Use OfHcs[/PA RA] parameter is set to USED but not required when the [PARA]Use OfHcs[/PA RA] parameter is set to NOT_USE D.
Not involved
Not involved
8/7/2013
19353267
162734118.xls.ms_office1
None
This parameter is valid when the SERVICE_ HO_BASE D_ON_RN C_SWITCH under the [PARA]Ho Switch[/PA RA] parameter is set to on through the [MML]SET CORRMAL GOWITCH [/MML] command.
Not involved
Not involved
8/7/2013
19363267
162734118.xls.ms_office1
None
RNC
None
Not involved
Not involved
8/7/2013
19373267
162734118.xls.ms_office1
60
RNC
None
Not involved
Not involved
8/7/2013
19383267
162734118.xls.ms_office1
dB
Not involved
Not involved
8/7/2013
19393267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
None
TRUE
TRUE
Cell
None
N(For the UE in idle mode, the value of this parameter decides whether the Not UE can involved receive the information of this neighbourin g cell in SIB11.)
Not involved
8/7/2013
19403267
162734118.xls.ms_office1
None
FALSE
FALSE
Cell
None
N(For the UE in idle mode, the value of this parameter decides whether the Not UE can involved receive the information of this neighbourin g cell in SIB12.)
Not involved
None
None
Cell
None
Not involved
Not involved
8/7/2013
19413267
162734118.xls.ms_office1
None
None
RNC
This parameter cannot be set to FACH only when the [PARA]Rrc Cause[/PA RA] parameter is set to EMERGCA LLEST or MBMSCAL LEST.
Not involved
Not involved
8/7/2013
19423267
162734118.xls.ms_office1
The parameter [PARA]SIG LKSX[/PA RA] in [MML]AD D MTP3LKS[ /MML] The [PARA]SIG LKSX[/PA RA] field in Not [MML]AD involved D M3LKS[/M ML] The parameter [PARA]SIG LKSX[/PA RA] in [MML]AD D M3LKS[/M ML] None Not involved
None
None
Not involved
Not involved
None
None
RNC
Not involved
Not involved
None
TRUE
TRUE
Transport channel
None
Not involved
Not involved
Not involved
None
None
MTP3
None
Not involved
Not involved
Not involved
This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.
8/7/2013
19433267
162734118.xls.ms_office1
The following relationship must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= [PARA]Cop perMaxMod e[/PARA]. The following relationship must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= [PARA]Cop perMaxMod e[/PARA].
kbit/s
WBAMR_ BITRATE_ Cell(ADD 23.85K(AD WBAMR_ CELLAMR D BITRATE_ CWB) CELLAMR 23.85K RNC(SET CWB) AMRCWB) -(SET AMRCWB)
Not involved
Not involved
8/7/2013
19443267
162734118.xls.ms_office1
The following relationship must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= NBAMR_B [PARA]Cop Cell(ADD ITRATE_1 perMaxMod NBAMR_B CELLAMR 2.20K(ADD e[/PARA]. ITRATE_1 C) CELLAMR The 2.20K RNC(SET C) following AMRC) -(SET relationship AMRC) must be satisfied: [PARA]Gol dMaxMode[ /PARA] >= [PARA]Silv erMaxMode [/PARA] >= [PARA]Cop perMaxMod e[/PARA].
kbit/s
Not involved
Not involved
kbit/s
D3.4
RNC
None
Not involved
Not involved
kbit/s
D3.4
RNC
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
8/7/2013
19453267
162734118.xls.ms_office1
The source IP address must be one of the following addresses: PPP link local IP address of the PEUa/POU a/POS, MLPPP group local IP address of the PEUa/POU a, Ethernet port IP address of the FG2a/GOU a, and equipment IP address, the Trunk IP address of the FG2a/GOU a board.
None
None
Ethernet port
None
Not involved
Not involved
Not involved
8/7/2013
19463267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
15
15
RNC
None
Not involved
Not involved
8/7/2013
19473267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC EF. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is EF.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUPS, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modificatio n for the existing user
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
19483267
162734118.xls.ms_office1
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is EF; RNC transimssio n type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modificatio n for the existing user
None
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
19493267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
15
15
RNC
None
Not involved
Not involved
dB
Cell
This parameter is required when the [PARA]Use OfHcs[/PA RA] parameter is set to USED but not required when the [PARA]Use OfHcs[/PA RA] parameter is set to NOT_USE D.
Not involved
Not involved
8/7/2013
19503267
162734118.xls.ms_office1
None
None
Physical channel
None
Not involved
Not involved
Not involved
None
Physical channel
None
Not involved
Not involved
None
Physical channel
None
Not involved
Not involved
None
Physical channel
None
Not involved
Not involved
None
Physical channel
None
Not involved
Not involved
8/7/2013
19513267
162734118.xls.ms_office1
None
None
Physical channel
None
Not involved
Not involved
None
B0000
B0000
RNC
None
RNC
After this parameter is modified, Less than the RNC 10 minutes must be reset to take effect.
8/7/2013
19523267
162734118.xls.ms_office1
None
WEEK
RNC
When the value of [PARA]DS T[/PARA] in [MML]SET Y TZ[/MML] is set to YES, the start type should be set.
RNC
None
All
RNC
None
Not involved
Not involved
None
OPEN
OPEN
SRB
None
Not involved
Not involved
Not involved
None
None
May
RNC
When the value of [PARA]DS T[/PARA] in [MML]SET TZ[/MML] is set to Y YES and the value of [PARA]SM [/PARA] is selected, the start month should be set.
RNC
8/7/2013
19533267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
Subsystem( ADD CBSADDR ) Sub System(SET None NCELLDE TECTSWIT CH) RNC(ADD IURCOMM SCCP) (ADD
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
VCL
When the value of [PARA]LN KT[/PARA] in [MML]LOP VCL[/MML ] is set to SAALLNK, the value of [PARA]SN[ /PARA] should be set.
Not involved
8/7/2013
19543267
162734118.xls.ms_office1
When the value of [PARA]BT[ /PARA] in [MML]LO D PATCH[/M ML] is set to SCUa, the value range of [PARA]SN[ /PARA] is 6 to 7. When the value of [PARA]BT[ /PARA] in [MML]LO D PATCH[/M ML] is set to GCUa/GCG a, the value range of [PARA]SN[ /PARA] is 12 to 13. When the value of [PARA]BT[ /PARA] in
None
None
RNC
Not involved
8/7/2013
19553267
162734118.xls.ms_office1
When the loopback type is changed to REMOTE_ LOOP or LOCAL_L OOP, the services will be interrupted until the loopback is cancelled.W hen the optical port is set to LOCAL_L OOP, it can not be set to REMOTE_ LOOP directly. You should set to NO_LOOP first before set to REMOTE_ LOOP. It is the same when set The standby port does not support the PING IP function.
None
None
RNC
None
Not involved
Not involved
None
None
Ethernet port
None
Not involved
Not involved
Not involved
None
None
When [PARA]BR DTYPE[/P Subrack(A ARA] in DD BRD) [MML]AD (CLR D BRD) BRD[/MM Not RNC(ULD L] is set to a involved RSTINFO,S value, the TR slot number CPUUSAG and the ETST) backup mode are required.
Not involved
Not involved
8/7/2013
19563267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
The priority of the correspondi ng service will be interrupt if the DSCP of the port's queue is modified. If a link is used, you cannot convert the link from E1 to T1, or from T1 to E1.
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
Subrack(A DD ETHREDP ORT,ACT MSP) RNC(SET MSP,SWP ETHPORT, CLR MSPREP,S ET MSPCMD)
This parameter is only valid to Not AOUa/UOI involved a_ATM/PO Ua/UOIa_I P board.
Not involved
Not involved
8/7/2013
19573267
162734118.xls.ms_office1
None
None
When the value of [PARA]IN HT[/PARA] in [MML]INH BRD[/MM L] is set to LOGIC,the value range of [PARA]SN[ /PARA] is 0, 2, 4, 8 to 27. Y When the value of [PARA]IN HT[/PARA] in [MML]INH BRD[/MM L] is set to PHYSICAL ,the value range of [PARA]SN[ /PARA] is 0 to 5, 8 to 27.
RNC
Only the active board can be logically inhibited when you set the logical slot number of the active board. If an active board is logically inhibited, neither active board nor standby board can be physically inhibited. If the active board or the standby board is physically inhibited, it cannot be logically inhibited.
8/7/2013
19583267
162734118.xls.ms_office1
None
None
RNC
When the value of [PARA]UI NT[/PARA] in [MML]UIN BRD[/MM L] is set to LOGIC, the slot number is required and the value range is 0, 2, 4, 8 to 27. Not When the involved value of [PARA]UI NT[/PARA] in [MML]UIN BRD[/MM L] is set to PHYSICAL , the slot number is required and the value range is 0 to 5, 8 to 27.
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnect ed with the equipment of other vendors.
8/7/2013
19593267
162734118.xls.ms_office1
(STR IMATST,A DD PPPLNK) E1/T1 link(SET E1T1LOP) Cell(LOP E1T1) RNC(ADD FLOW,SET BFDPROT OSW,TRC MAC,STR ETHOAML OOPTST,A DD IPPATHBI ND,ADD VLANID,A DD MPLNK,A DD DEVIP,AD D IMAGRP,A DD FRALNK,T RC IPADDR,S TR E1T1TST)
None
None
Only valid to the slot of FG2a and GOUa. For FG2a board, if the type of port 0 is GE, the Not PN cannot involved be 1~3; if the type of port 4 is GE, the PN cannot be 5~7. none
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
19603267
162734118.xls.ms_office1
When the value of [PARA]LN KT[/PARA] in [MML]AC T Not VCLCC[/M involved ML] is set to SAALLNK, the slot number of the SPUa should be None Not involved
None
None
RNC
Not involved
Not involved
None
None
SAAL
Not involved
Not involved
None
None
Adjacent Node
When the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to IUB, and the value of [PARA]IsR OOTNODE [/PARA] in [MML]AD Not D involved ADJNODE[ /MML] is set to YES, or the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to UNI_AAL2 SWITCH, None Not involved
Not involved
Not involved
None
None
SCTP
Not involved
Not involved
8/7/2013
19613267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified. This parameter cannot be modified.
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
Board
None
Not involved
Not involved
Not involved
None
None
MTP3
None
Not involved
Not involved
Not involved
None
None
RNC
SNAC needs to be set when [PARA]Sna ExistInd[/P ARA] in [MML]AD D IMSISNAM AP[/MML] is set to YES; Not SNAC does involved not need to be set when [PARA]Sna ExistInd[/P ARA] in [MML]AD D IMSISNAM AP[/MML] is set to PS_DOMAI N.
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
19623267
162734118.xls.ms_office1
None
OFF
RNC
None
Not involved
Not involved
None
None
RNC
When the value of [PARA]SP DF[/PARA] Y is set to WNF, this parameter is valid.
RNC
8/7/2013
19633267
162734118.xls.ms_office1
None
None
RNC
RNC
None
None
RNC
When the value of [PARA]SP DF[/PARA] Y is set to DNF, this parameter is valid.
RNC
None
OFF
OFF
Cell
This parameter is valid when the HCS_SPD_ EST_SWIT CH is ON and [PARA]Use OfHcs[/PA RA] is USED in [MML]AD D CELLHCS[ /MML]. The HCS_SPD_ EST_SWIT CH in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML].
Not involved
Not involved
8/7/2013
19643267
162734118.xls.ms_office1
After this parameter is modified, Less than the RNC 10 minutes must be reset to take effect.
None
WNF
WNF
RNC
None
RNC
None
100M
Ethernet port
When the value of [PARA]BR DTYPE[/P ARA] is set to FG2a,the value of [PARA]PT YPE[/PAR A] is set to FE,[PARA] AUTO[/PA RA] in [MML]SET ETHPORT[ /MML] is set to DISABLE,t he FE port rate can be set.
Not involved
Not involved
None
255
255
Cell
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
19653267
162734118.xls.ms_office1
None
None
Not involved
Not involved
None
None
RNC
This parameter, [PARA]Tra fficClass[/P ARA], [PARA]Use rPriority[/P ARA] and [PARA]TH P[/PARA] form an SPI mapping table.
Not involved
Not involved
None
None
Ethernet port
None
Not involved
Not involved
Not involved
8/7/2013
19663267
162734118.xls.ms_office1
per cent
70
70
Cell
The value of this parameter must satisfy the following relationship: [PARA]Spu cHeavy[/PA RA] >= [PARA]Spu cLight[/PA RA]; 100 >= [PARA]Spu cHeavy[/PA RA] + [PARA]Spu cHyst[/PAR A].
Not involved
Not involved
per cent
Cell
The value of this parameter must satisfy the following relationship: [PARA]Spu cLight[/PA RA] >= [PARA]Spu cHyst[/PAR A]; 100 >= [PARA]Spu cHeavy[/PA RA] + [PARA]Spu cHyst[/PAR A].
Not involved
Not involved
8/7/2013
19673267
162734118.xls.ms_office1
per cent
45
45
Cell
The value of this parameter must satisfy the following relationship: [PARA]Spu cHeavy[/PA RA] >= [PARA]Spu cLight[/PA RA]; [PARA]Spu cLight[/PA RA] >= [PARA]Spu cHyst[/PAR A].
Not involved
Not involved
per cent
90
RNC
None
Not involved
Not involved
Before enabling load sharing, you need to set the [PARA]RN C_SHARE_ SWITCH[/P ARA] switch in [MML]SET RRCTRLS WITCH[/M ML] to ON.The parameter modificatio n has no impact on the equipment.
8/7/2013
19683267
162734118.xls.ms_office1
None
DCH
RNC
None.
Not involved
Not involved
None
FALSE
RNC
None.
Not involved
Not involved
8/7/2013
19693267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
15
15
RNC
None
Not involved
Not involved
kbit/s
32
32
Cell
This parameter must satisfy the following relationship: [PARA]SR BMBR[/PA RA] >= [PARA]SR BGBR[/PA RA].
Not involved
Not involved
8/7/2013
19703267
162734118.xls.ms_office1
kbit/s
512
512
Cell
This parameter must satisfy the following relationship: [PARA]SR BMBR[/PA RA] >= [PARA]SR BGBR[/PA RA].
Not involved
Not involved
None
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is RNC EF. When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is EF.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modificatio n for the existing user
8/7/2013
19713267
162734118.xls.ms_office1
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
None
100
100
RNC
None
Not involved
Not involved
None
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NOCONFI G; transimssio n type is dual stack, the parameter is EF; RNC transimssio n type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NOCONFI G.
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modificatio n for the existing user
None
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
19723267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
15
15
RNC
None
Not involved
Not involved
None
None
E1/T1
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
One clock source can only with one priority, otherwise it is the same.
None
None
RNC
When the value of [PARA]MO DE[/PARA] in [MML]SET CLKMODE [/MML] is set to MANUAL, the value of this parameter should be set.
Not involved
Not involved
None
8/7/2013
19733267
162734118.xls.ms_office1
None
None
RNC
The parameter must not be the same as any IP address that has been configured Not in the RNC. involved The parameter must not be the same as the internal IP address of the BAM.
Not involved
Not involved
None
None
None
Not involved
Not involved
Not involved
None
None
RNC
When 2MBPS exists on the clock source, T1BPS is not allowed to be added; Not when involved T1BPS exists on the clock source, 2MBPS is not allowed to be added.
Not involved
Not involved
One clock source can only with one priority, otherwise it is the same. One backplane 8K outClock can only has one clock source.
8/7/2013
19743267
162734118.xls.ms_office1
None
None
E1/T1
None
Not involved
Not involved
min
60
60
SAAL
When the value of [PARA]SA ALLNKT[/ PARA] is set to NNI, this parameter is valid.
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
19753267
162734118.xls.ms_office1
None
None
RNC RNC(ADD RNCCBCP UID,ADD IURCOMM SCCP,TRC IPADDR,S ET DEVPATC HPARA,A DD FLOW,AC T VCLCC,SE T BFDPROT OSW,TRC MAC,STR ETHOAML OOPTST,A DD IPPATHBI ND,ACT FAN,STR IPLOPTST, SET SCUPORT, ADD VLANID,A DD MPLNK,SE T ETHPORT,
None
Not involved
Not involved
Not involved
None
None
None
None
board
When the value of [PARA]OT [/PARA] in [MML]LO D PATCH[/M ML] is set to SCUa, SPUa, DPUb, PEUa, AEUa, FG2a, GOUa, AOUa, Not POUa, involved UOIa, or ALL, the value of [PARA]SR N[/PARA] should be set. When the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ When the value of [PARA]SR T[/PARA] in [MML]SET CLK[/MML Y ] is set to RBS, the value of [PARA]SR N[/PARA] should be set. None Not involved
Not involved
Not involved
RNC
None
None
RNC
Not involved
Not involved
None
8/7/2013
19763267
162734118.xls.ms_office1
None
None
SAAL
None
Not involved
Not involved
Not involved
None
None
Adjacent Node
When the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to IUB, and the value of [PARA]IsR OOTNODE [/PARA] in [MML]AD Not D involved ADJNODE[ /MML] is set to YES, or the value of [PARA]NO DET[/PAR A] in [MML]AD D ADJNODE[ /MML] is set to UNI_AAL2 SWITCH, None Not involved
Not involved
Not involved
None
None
SCTP
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
Board
None
Not involved
Not involved
Not involved
This parameter cannot be modified. This parameter cannot be modified. The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.
8/7/2013
19773267
162734118.xls.ms_office1
None
None
MTP3
None
Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
YES
RNC
Not involved
Not involved
None
NRT
RNC
None
Not involved
Not involved
8/7/2013
19783267
162734118.xls.ms_office1
ms
400
RNC
None
Not involved
Not involved
60
RNC
None
Not involved
Not involved
8/7/2013
19793267
162734118.xls.ms_office1
RNC
None
Not involved
Not involved
8/7/2013
19803267
162734118.xls.ms_office1
30
RNC
None
Not involved
Not involved
8/7/2013
19813267
162734118.xls.ms_office1
None
SRNSR_DS CR_IUR_R ESRCE_S WITCH:OF F, SRNSR_DS CR_LOC_S EPRAT_S WITCH:ON , RNC SRNSR_DS CR_PROP G_DELAY _SWITCH: OFF, SRNSR_DS CR_SEPRA T_DUR_S WITCH:ON
None
Not involved
Not involved
8/7/2013
19823267
162734118.xls.ms_office1
60
RNC
None
Not involved
Not involved
None
None
UE
SRNTI needs to be set when [PARA]CO NTEXTTY PE[/PARA] in [MML]RST IUR[/MML ] is set to Context_Gr oup; SRNTI Not does not involved need to be set when [PARA]CO NTEXTTY PE[/PARA] in [MML]RST IUR[/MML ] is set to Context or All_Context s.
Not involved
Not involved
8/7/2013
19833267
162734118.xls.ms_office1
None
None
board
None
RNC
If the interface board clock source of the RSS subrack is set, you can set the 8 kHz output clock source. If Less than 5 the interface minutes board clock source of the RBS subrack is set, you cannot set the 8 kHz output clock source for the backplane.
dB
-50
-50
Physical channel
None
Not involved
8/7/2013
19843267
162734118.xls.ms_office1
per cent
60
board
[PARA]SS CPUAVEU SAGEALM THD[/PAR A] must be Not smaller than involved [PARA]SS CPUMAXU SAGEALM THD[/PAR A].
Not involved
Not involved
per cent
70
board
[PARA]SS CPUMAXU SAGEALM THD[/PAR A] must be Not greater than involved [PARA]SS CPUAVEU SAGEALM THD[/PAR A]
Not involved
Not involved
None
None
RAB
None.
Not involved
Not involved
8/7/2013
19853267
162734118.xls.ms_office1
1.When the value of [PARA]BT[ /PARA] in [MML]SET CPUTHD[/ MML] is set to DPUb, the value of [PARA]SS DSPAVEU SAGEALM THD[/PAR Not A] should involved be set. 2.[PARA]S SDSPAVE USAGEAL MTHD[/PA RA] must be smaller than [PARA]SS DSPMAXU SAGEALM THD[/PAR A]. 1.When the value of [PARA]BT[ /PARA] in [MML]SET CPUTHD[/ MML] is set to DPUb, the value of [PARA]SS DSPAVEU SAGEALM THD[/PAR Not A] should involved be set. 2.[PARA]S SDSPMAX USAGEAL MTHD[/PA RA] must be bigger than [PARA]SS DSPAVEU SAGEALM THD[/PAR A].
per cent
80
DSP
Not involved
Not involved
per cent
85
DSP
Not involved
Not involved
8/7/2013
19863267
162734118.xls.ms_office1
This parameter is required when the [PARA]Use OfHcs[/PA RA] parameter is set to USED but not required when the [PARA]Use OfHcs[/PA RA] parameter is set to NOT_USE D.
dB
Cell
Not involved
Not involved
dB
127
127
Cell
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
19873267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
None
03&00&00 RNC
When the value of [PARA]DS T[/PARA] in [MML]SET Y TZ[/MML] is set to YES, the start time should be set.
RNC
8/7/2013
19883267
162734118.xls.ms_office1
1.When the value of [PARA]ST[ /PARA] in [MML]AD D ATMTRF[/ MML] is set to CBR, the rate unit should be set; when the value of [PARA]UT [/PARA] is selected, the Not peak rate involved should be set. 2.When the value of [PARA]ST[ /PARA] in [MML]AD D ATMTRF[/ MML] is set to UBR_PLUS , the rate unit should be set; when
None
It is recommend ed that the service type of signaling link be CBR, the SAALLNK/ real-time AAL2PAT service be H/IPOAPV CBR or C/VPCLCX RTVBR, using this the non-realATM traffic time service record index be NRTVBR, and the OAM data link be UBR_PLUS .
Not involved
Not involved
None
500
RNC
Not involved
Not involved
8/7/2013
19893267
162734118.xls.ms_office1
None
ACTIVE
ACTIVE
Cell
None
Not involved
Not involved
min
None
Cell
min
None
Cell
min
None
Cell
This paramter is valid only when [PARA]Dy nShutdown Switch[/PA RA] is set to ON_1 or ON_2 or ON_3. This paramter is valid only when [PARA]Dy nShutdown Switch[/PA RA] is set to ON_2 or ON_3. This paramter is valid only when [PARA]Dy nShutdown Switch[/PA RA] is set to ON_3.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
ms
20000
RNC
None
Not involved
Not involved
8/7/2013
19903267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. For parameter modificatio n, refer to ITU-T Q.2110.
20
20
SCCP
None
Not involved
Not involved
None
67
67
SAAL
None
Not involved
Not involved
None
OFF
OFF
RNC
When the value of [PARA]DP CT[/PARA] is set to IUCS, IUPS, IUR, Y IUCS_RAN AP, or IUCS_ALC AP, this parameter is valid.
RNC
After this parameter is modified, Less than the RNC 10 minutes must be reset to take effect.
None
None
RNC
None
Not involved
Not involved
Not involved
This parameter cannot be modified. The parameter modificatio n has no impact on the equipment.
kbit/s
D16
RNC
None
Not involved
Not involved
8/7/2013
19913267
162734118.xls.ms_office1
kbit/s
32
32
Cell
This parameter must satisfy the following relationship: [PARA]ST REAMMB R[/PARA] >= [PARA]ST REAMGBR [/PARA].
Not involved
Not involved
kbit/s
D384
RNC
None
Not involved
Not involved
8/7/2013
19923267
162734118.xls.ms_office1
kbit/s
512
512
Cell
This parameter must satisfy the following relationship: [PARA]ST REAMMB R[/PARA] >= [PARA]ST REAMGBR [/PARA].
Not involved
Not involved
kbit/s
D16
RNC
None
Not involved
Not involved
None
FALSE(AD D CELLMBM SSCCPCH, ADD PICH,ADD FALSE AICH,ADD SCCPCHB ASIC) -(SET MBMSSCC PCH)
Physical channel
None
Not involved
Not involved
8/7/2013
19933267
162734118.xls.ms_office1
This paramter is valid only when [PARA]Tx DiversityInd [/PARA] is set to TRUE. Y This parameter is valid only when [PARA]Tx DiversityInd [/PARA] is set to TRUE.
None
Cell
None
None
Not involved
Not involved
8/7/2013
19943267
162734118.xls.ms_office1
When the value of [PARA]FP MUXSWIT CH[/PARA ] in [MML]AD D IPPATH[/ MML] is set to YES,this parameter is valid.
byte
127
127
IP Path
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
False
False
Cell
None
Not involved
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.
None
FALSE
FALSE
NodeB
None.
Not involved
Not involved
None
FALSE
FALSE
RNC
None
Not involved
Not involved
8/7/2013
19953267
162734118.xls.ms_office1
None
FALSE
FALSE
NodeB
None.
Not involved
Not involved
None
NO
NO
RNC
None
Not involved
Not involved
None
None
board
None
RNC
Not involved
None
8/7/2013
19963267
162734118.xls.ms_office1
When [PARA]CN ProtclVer[/ PARA] in [MML]AD D CNNODE[/ MML] is set to R99, set SupportCR Type to CR527_SU PPORT or CR527_NO T_SUPPOR T; when [PARA]CN ProtclVer[/ PARA] in [MML]AD D CNNODE[/ MML] is set to R4, set SupportCR Type to CR528_SU PPORT or CR528_NO T_SUPPOR T; when [PARA]CN
When [PARA]CN ProtclVer[/ PARA] in [MML]AD D CNNODE[/ MML] is set to R99, SupportCR Type is CR527_SU PPORT or CR527_NO T_SUPPOR T; when [PARA]CN ProtclVer[/ PARA] in [MML]AD D CNNODE[/ MML] is set to R4, SupportCR Type is CR528_SU PPORT or CR528_NO T_SUPPOR T; when [PARA]CN
None
None
RNC
Not involved
Not involved
None
FALSE
FALSE
Cell
None
Not involved
Not involved
None
FALSE
FALSE
NodeB
None.
Not involved
Not involved
8/7/2013
19973267
162734118.xls.ms_office1
None
FALSE
FALSE
Cell
None
Not involved
Not involved
None
None
SRB
None
Not involved
Not involved
Not involved
None
SUN
RNC
When the value of [PARA]DS T[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of Y [PARA]SM [/PARA] in [MML]SET TZ[/MML] is set to WEEK or DATEWEE K, the start week should be set. Not involved
RNC
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
19983267
162734118.xls.ms_office1
The modificatio n of Switch3GP P25415CR0 125 is valid only when [PARA]CN DomainId[/ PARA] in [MML]AD D CNNODE[/ MML] is set to CS_DOMA IN.The parameter modificatio n has no impact on the equipment. This parameter is based on actual networking.
None
OFF
RNC
When [PARA]CN DomainId[/ PARA] in [MML]AD D CNNODE[/ MML] is set to CS_DOMA IN, Switch3GP P25415CR0 125 needs to be set.
Not involved
Not involved
None
YES
YES
SCTP
None
Not involved
Not involved
None
10
10
SCTP
None
Not involved
Not involved
None
OFF
OFF
RNC
None
Not involved
Not involved
Not involved
Change this parameter will impact the patch function controlled by switch 1.
8/7/2013
19993267
162734118.xls.ms_office1
None
RNC
None
Not involved
Not involved
Not involved
Change this parameter will impact the patch function controlled by switch 10. Change this parameter will impact the patch function controlled by switch 2. Change this parameter will impact the patch function controlled by switch 3. Change this parameter will impact the patch function controlled by switch 4. Change this parameter will impact the patch function controlled by switch 5. Change this parameter will impact the patch function controlled by switch 6.
None
OFF
OFF
RNC
None
Not involved
Not involved
Not involved
None
OFF
OFF
RNC
None
Not involved
Not involved
Not involved
None
OFF
OFF
RNC
None
Not involved
Not involved
Not involved
None
OFF
OFF
RNC
None
Not involved
Not involved
Not involved
None
OFF
OFF
RNC
None
Not involved
Not involved
Not involved
8/7/2013
20003267
162734118.xls.ms_office1
None
RNC
None
Not involved
Not involved
Not involved
Change this parameter will impact the patch function controlled by switch 7. Change this parameter will impact the patch function controlled by switch 8. Change this parameter will impact the patch function controlled by switch 9.
None
RNC
None
Not involved
Not involved
Not involved
None
RNC
None
Not involved
Not involved
Not involved
None
FIRST
RNC
When the value of [PARA]DS T[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of Y [PARA]SM [/PARA] in [MML]SET TZ[/MML] is set to WEEK, the start week sequence should be set. N (No impact on the UE in idle mode)
RNC
None
60
RNC
None
Not involved
Not involved
8/7/2013
20013267
162734118.xls.ms_office1
None
None
RNC
None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
Not involved
None
None
None
RNC
None
Not involved
Not involved
None
None
60
RNC
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. None
min
10
RNC
None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
100
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
8/7/2013
20023267
162734118.xls.ms_office1
None
180
RNC
None
Not involved
Not involved
ms
None
MTP3B
None
RNC
Not involved
ms
None
MTP3B
None
RNC
Not involved
ms
None
MTP3B
None
RNC
Not involved
8/7/2013
20033267
162734118.xls.ms_office1
ms
None
MTP3B
None
RNC
Not involved
ms
None
MTP3B
None
RNC
Not involved
ms
None
MTP3B
None
RNC
Not involved
ms
None
MTP3B
None
RNC
Not involved
ms
None
MTP3B
None
RNC
Not involved
8/7/2013
20043267
162734118.xls.ms_office1
ms
None
MTP3B
None
RNC
Not involved
ms
D2000
RNC
None
Not involved
Not involved
8/7/2013
20053267
162734118.xls.ms_office1
T302 broadcast in the SIB1 = Roundup {[timer 302 [ms]] + 2 x [Iub transmissio n delay]}. [timer 302 [ms]] is configured through the SET CONNMO DETIMER command. [Iub transmissio n delay] is the Iub transmissio n delay configured through the ADD NodeB command. Roundup means rounding up and
ms
D2000
RNC
None
Not involved
Not involved
8/7/2013
20063267
162734118.xls.ms_office1
ms
D2000
RNC
None
Not involved
Not involved
min
D30
RNC
None
Not involved
Not involved
8/7/2013
20073267
162734118.xls.ms_office1
None
RNC
None
Not involved
Not involved
ms
D40
RNC
None
Not involved
Not involved
RNC
None
Not involved
Not involved
8/7/2013
20083267
162734118.xls.ms_office1
RNC
None
Not involved
Not involved
RNC
None
Not involved
Not involved
8/7/2013
20093267
162734118.xls.ms_office1
D0
RNC
Not involved
Not involved
The time value of T314 and T315 should be both equal to 0 or both greater than T302*N302 .The parameter modificatio n has no impact on the equipment.
8/7/2013
20103267
162734118.xls.ms_office1
D0
RNC
Not involved
Not involved
The time value of T314 and T315 should be both equal to 0 or both greater than T302*N302 .The parameter modificatio n has no impact on the equipment.
8/7/2013
20113267
162734118.xls.ms_office1
D30
RNC
None
Not involved
Not involved
min
10
10
RNC
T3212 needs to be set when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to CS_DOMA IN; T3212 does not need to be set when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to PS_DOMAI N.
N (Changing the time for the UE in Not idle mode to involved initiate periodical location update)
Not involved
The modificatio n of T3212 is valid only when [PARA]CN DomainId[/ PARA] in [MML]AD D CNDOMAI N[/MML] is set to CS_DOMA IN.The parameter modificatio n has no impact on the equipment.
8/7/2013
20123267
162734118.xls.ms_office1
ms
D600
RNC
None
Not involved
Not involved
ms
None
MTP3B
None
RNC
Not involved
8/7/2013
20133267
162734118.xls.ms_office1
ms
None
MTP3B
None
RNC
Not involved
ms
None
MTP3B
None
RNC
Not involved
ms
None
MTP3B
None
RNC
Not involved
8/7/2013
20143267
162734118.xls.ms_office1
per cent
10
RNC
None
Not involved
Not involved
dB
Not involved
Not involved
8/7/2013
20153267
162734118.xls.ms_office1
dBm
Not involved
Not involved
8/7/2013
20163267
162734118.xls.ms_office1
dB
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML].
Not involved
Not involved
8/7/2013
20173267
162734118.xls.ms_office1
dBm
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML].
Not involved
Not involved
8/7/2013
20183267
162734118.xls.ms_office1
dB
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML].
Not involved
Not involved
8/7/2013
20193267
162734118.xls.ms_office1
dBm
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML].
Not involved
Not involved
8/7/2013
20203267
162734118.xls.ms_office1
dBm
Not involved
Not involved
8/7/2013
20213267
162734118.xls.ms_office1
dBm
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML].
Not involved
Not involved
8/7/2013
20223267
162734118.xls.ms_office1
dBm
Not involved
Not involved
8/7/2013
20233267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
8/7/2013
20243267
162734118.xls.ms_office1
Configured to 1 when TFsNumber is 1;Configure d to 0 when TFsNumber is 2 or Transport 3(ADD channel FACHDYN TFS) None(ADD PCHDYNT FS) 1(ADD RACHDYN TFS)
None
None
Not involved
Not involved
Not involved
None
1(ADD PCHDYNT FS,ADD FACHDYN Transport TFS) channel 2(ADD RACHDYN TFS)
This paramter is valid only when Not [PARA]TFs involved Number[/P ARA] is set to D2 or D3.
Not involved
Not involved
None
Transport channel
This paramter is valid only when Not [PARA]TFs involved Number[/P ARA] is set to D3.
Not involved
Not involved
8/7/2013
20253267
162734118.xls.ms_office1
None
None
RNC
1.[PARA]T bSizeIndex1 [/PARA] < [PARA]Tb SizeIndex2[ /PARA] < [PARA]Tb SizeIndex3[ /PARA] < [PARA]Tb SizeIndex4[ /PARA]
Not involved
Not involved
8/7/2013
20263267
162734118.xls.ms_office1
None
None
RNC
1.[PARA]T bSizeIndex1 [/PARA] < [PARA]Tb SizeIndex2[ /PARA] < [PARA]Tb SizeIndex3[ /PARA] < [PARA]Tb SizeIndex4[ /PARA]
Not involved
Not involved
8/7/2013
20273267
162734118.xls.ms_office1
None
None
RNC
1.[PARA]T bSizeIndex1 [/PARA] < [PARA]Tb SizeIndex2[ /PARA] < [PARA]Tb SizeIndex3[ /PARA] < [PARA]Tb SizeIndex4[ /PARA]
Not involved
Not involved
8/7/2013
20283267
162734118.xls.ms_office1
None
None
RNC
1.[PARA]T bSizeIndex1 [/PARA] < [PARA]Tb SizeIndex2[ /PARA] < [PARA]Tb SizeIndex3[ /PARA] < [PARA]Tb SizeIndex4[ /PARA]
Not involved
Not involved
None
170
170
MTP3
None
Not involved
Not involved
8/7/2013
20293267
162734118.xls.ms_office1
chip
None
Cell
None
Cell
None
None
Cell
This paramter is valid only when [PARA]Cel lChoice[/PA RA] is set to 3GCELL.
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
10
10
MTP3
None
Not involved
Not involved
D60
D60
Cell
This parameter is required when the [PARA]Use OfHcs[/PA RA] parameter is set to USED but not required when the [PARA]Use OfHcs[/PA RA] parameter is set to NOT_USE D.
Not involved
Not involved
8/7/2013
20303267
162734118.xls.ms_office1
This parameter is required when the [PARA]Use OfHcs[/PA RA] parameter is set to USED but not required when the [PARA]Use OfHcs[/PA RA] parameter is set to NOT_USE D.
D20
D20
Cell
Not involved
Not involved
NotUsed
NotUsed
Cell
This parameter is valid only when [PARA]No nhcsInd[/P ARA] is set to CONFIGU RED.
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
NotUsed
NotUsed
Cell
This parameter is valid only when [PARA]No nhcsInd[/P ARA] is set to CONFIGU RED.
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
20313267
162734118.xls.ms_office1
None
Not involved
Not involved
None
OPEN
OPEN
SRB
None
Not involved
Not involved
Not involved
None
degree Celsius
45
45
SRB
None
Not involved
Not involved
Not involved
None
degree Celsius
SRB
None
Not involved
Not involved
Not involved
None
8/7/2013
20323267
162734118.xls.ms_office1
N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to select to this neighbourin g cell. On the other hand. the Not smaller the involved value is, the higher the possibility for the UE to select to this neighbourin g cel. If the value is INFINITY, the UE can never choose this neighbourin g cell to
dB
D3
D3
Cell
This parameter is valid when [PARA]Tpe naltyHcsRe select[/PAR A] is not set to D0.
Not involved
8/7/2013
20333267
162734118.xls.ms_office1
N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to select to this neighbourin g cell. On the other hand. the Not smaller the involved value is, the higher the possibility for the UE to select to this neighbourin g cel. If the value is INFINITY, the UE can never choose this neighbourin g cell to
dB
D2
D2
Cell
This parameter is valid when [PARA]Tpe naltyHcsRe select[/PAR A] is not set to D0.
Not involved
ms
Not involved
Not involved
8/7/2013
20343267
162734118.xls.ms_office1
ms
Not involved
Not involved
ms
Not involved
Not involved
8/7/2013
20353267
162734118.xls.ms_office1
This parameter is valid only when [PARA]Cho iceRprtUnit ForDlBasic Meas[/PAR A] is set to TEN_MSE C,and it must satisfy the following relationship: [PARA]Ten MsecForDl BasicMeas[ /PARA] < [PARA]Intr aFreqLdbPe riodTimerL en[/PARA] x 1000/2 (See [MML]SET LDCPERIO D[/MML] and [MML]SET SATLDCP ERIOD[/M This parameter is valid only when [PARA]Cho iceRprtUnit ForDlOlcM eas[/PARA] is set to TEN_MSE C. This parameter is valid only when [PARA]Cho iceRprtUnit ForHsdpaR ateMeas[/P ARA] is set to TEN_MSE C.
ms
Not involved
Not involved
ms
Not involved
Not involved
ms
Not involved
Not involved
8/7/2013
20363267
162734118.xls.ms_office1
This parameter is valid only when [PARA]Cho iceRprtUnit ForHsdpaP wrMeas[/P ARA] is set to TEN_MSE C. This parameter is valid only when [PARA]Cho iceRprtUnit ForHsupaR ateMeas[/P ARA] is set to TEN_MSE C.
ms
100
RNC
Not involved
Not involved
ms
100
RNC
Not involved
Not involved
8/7/2013
20373267
162734118.xls.ms_office1
This parameter is valid only when [PARA]Cho iceRprtUnit ForUlBasic Meas[/PAR A] is set to TEN_MSE C,and it must satisfy the following relationship: [PARA]Ten MsecForUl BasicMeas[ /PARA] < [PARA]Ldr PeriodTime rLen[/PAR A] * 1000/2 (See [MML]SET LDCPERIO D[/MML] and [MML]SET SATLDCP ERIOD[/M ML]); This parameter is valid only when [PARA]Cho iceRprtUnit ForUlOlcM eas[/PARA] is set to TEN_MSE C.
ms
Not involved
Not involved
ms
Not involved
Not involved
8/7/2013
20383267
162734118.xls.ms_office1
ms
Not involved
Not involved
The value of the parameter must satisfy the function below: [PARA]NF Cell(ADD astSpdEst[/ CELLHCS PARA]*[P HO) ARA]TSlo RNC(SET wSpdEst[/P HCSHO) ARA] >= [PARA]NSl owSpdEst[/ PARA]*[P ARA]TFast SpdEst[/PA RA].
Not involved
Not involved
8/7/2013
20393267
162734118.xls.ms_office1
None
EXISTS
Physical channel
This parameter is valid only when [PARA]Slot Not Format[/PA involved RA] is equal to or more than D8.
Not involved
Not involved
None
None
Transport channel
None
Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
None
280
RNC
Not involved
Not involved
8/7/2013
20403267
162734118.xls.ms_office1
dB
None
RNC
Not involved
Not involved
dB
None
RNC
Not involved
Not involved
8/7/2013
20413267
162734118.xls.ms_office1
This parameter, [PARA]Tra fficClass[/P ARA], [PARA]Use rPriority[/P ARA], and [PARA]SPI [/PARA] form an SPI mapping table. This parameter is required when the [PARA]Tra fficClass[/P ARA] parameter is set to INTERACT IVE.
None
None
RNC
Not involved
Not involved
None
Medium
RNC
None
Not involved
Not involved
None
Low
RNC
None
Not involved
Not involved
None
Low
RNC
None
Not involved
Not involved
None
Low
RNC
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
8/7/2013
20423267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
Low
RNC
None
Not involved
Not involved
None
Low
RNC
None
Not involved
Not involved
None
High
RNC
None
Not involved
Not involved
None
High
RNC
None
Not involved
Not involved
None
High
RNC
None
Not involved
Not involved
None
High
RNC
None
Not involved
Not involved
None
High
RNC
None
Not involved
Not involved
8/7/2013
20433267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
Medium
RNC
None
Not involved
Not involved
None
Medium
RNC
None
Not involved
Not involved
None
Medium
RNC
None
Not involved
Not involved
None
Medium
RNC
None
Not involved
Not involved
8/7/2013
20443267
162734118.xls.ms_office1
This parameter is required when the [PARA]Tra fficClass[/P ARA] parameter is set to INTERACT IVE; The mapping relationship between the traffic handling priority value of INTERACT IVE service and its correspondi ng class can be set through command [MML]SET IAVUSERT HPCLASS[/ MML].
None
None
RNC
Not involved
Not involved
ms
2000
2000
Ethernet port
None
Not involved
Not involved
Not involved
Ethernet port
None
Not involved
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.
None
Cell
This paramter is valid only when [PARA]Prio Not involved rity(BLK CELL)[/PA RA] is set to NORMAL.
Not involved
Not involved
8/7/2013
20453267
162734118.xls.ms_office1
The parameter modificatio Less than 5 AAL2 Path n has no minutes impact on the equipment. The parameter modificatio Not Not n has no involved involved impact on the equipment.
ms
10
10
AAL2 Path
None
None
Ethernet port
None
Not involved
ms
Not involved
Not involved
8/7/2013
20463267
162734118.xls.ms_office1
This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA.
ms
5000
5000
RAB
Not involved
Not involved
ms
This parameter is valid when [PARA]Inte rFreqReport Mode[/PAR A] is set to EVENT_T RIGGER.
Not involved
Not involved
8/7/2013
20473267
162734118.xls.ms_office1
ms
Not involved
Not involved
8/7/2013
20483267
162734118.xls.ms_office1
ms
Not involved
Not involved
8/7/2013
20493267
162734118.xls.ms_office1
ms
0(ADD CELLMBD RINTERRA T,ADD CELLINTE 0 RRATHOC OV) -(SET INTERRAT HOCOV)
Cell(ADD CELLMBD RINTERRA T,ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)
This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to PERIODIC AL_REPO RTING.
Not involved
Not involved
8/7/2013
20503267
162734118.xls.ms_office1
ms
0(ADD CELLMBD RINTERFR EQ,ADD CELLINTE 0 RFREQHO COV) -(SET INTERFRE QHOCOV)
Cell(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO COV) RNC(SET INTERFRE QHOCOV)
This parameter is valid when [PARA]Inte rFreqReport Mode[/PAR A] is set to PERIODIC AL_REPO RTING.
Not involved
Not involved
8/7/2013
20513267
162734118.xls.ms_office1
ms
0(ADD CELLMBD RINTERRA T,ADD CELLINTE 0 RRATHOC OV) -(SET INTERRAT HOCOV)
Cell(ADD CELLMBD RINTERRA T,ADD CELLINTE RRATHOC OV) RNC(SET INTERRAT HOCOV)
This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to PERIODIC AL_REPO RTING.
Not involved
Not involved
8/7/2013
20523267
162734118.xls.ms_office1
ms
D240
D240
RAB
None.
Not involved
Not involved
8/7/2013
20533267
162734118.xls.ms_office1
ms
D2560
D2560
RAB
None.
Not involved
Not involved
None
RAB
This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA.
Not involved
Not involved
8/7/2013
20543267
162734118.xls.ms_office1
This parameter is required when the [PARA]Rlc Mode[/PAR A] parameter is set to AM and the [PARA]Am RlcCfgPara [/PARA] parameter is set to FLOWCON TROL_PA RA. None The TRMMAP index is configured by setting the value of [PARA]TM I[/PARA] in [MML]AD D TRMMAP[/ MML]. The TRMMAP index is configured by setting the value of [PARA]TM I[/PARA] in [MML]AD D TRMMAP[/ MML].
None
14
14
RAB
Not involved
Not involved
None
None
RNC
Not involved
Not involved
Not involved
None
None
Adjacent Node
Not involved
Not involved
None
None
Adjacent Node
Not involved
Not involved
8/7/2013
20553267
162734118.xls.ms_office1
The TRMMAP index is configured by setting the value of [PARA]TM I[/PARA] in [MML]AD D TRMMAP[/ MML].
None
None
Adjacent Node
Not involved
Not involved
ms
None
MTP3B
None
RNC
Not involved
ms
None
MTP3B
None
RNC
Not involved
The parameter modificatio n has no impact on the equipment. Set TnlBearerT ype according to the actual used transport type.The parameter modificatio n has no impact on the equipment.
None
None
RNC
None
Not involved
Not involved
8/7/2013
20563267
162734118.xls.ms_office1
Set TnlBearerT ype according to the actual used transport type.The parameter modificatio n has no impact on the equipment.
None
None
RNC
None
Not involved
Not involved
None
1. If the NodeB is configured with the NCP through [MML]AD D NCP[/MML ] or configured with the CCP through [MML]AD D Y CCP[/MML ], the transmissio n type cannot be modified. 2. If a NodeB OM channel is set up, the transmissio n type cannot be modified. 3. If the NodeB is
NodeB
Before modifying this parameter, deactivate all the cells under this NodeB.
8/7/2013
20573267
162734118.xls.ms_office1
When the value of [PARA]DS T[/PARA] in [MML]SET TZ[/MML] Y is set to YES, the adjust method should be set.
min
60
RNC
RNC
ms
None(ADD FACH) 10(SET MBMSFAC Transport H,ADD channel CELLMBM SFACH,AD D PCH)
None
Not involved
Not involved
ms
None(ADD FACH) 35(SET MBMSFAC Transport H,ADD channel CELLMBM SFACH,AD D PCH)
None
Not involved
Not involved
8/7/2013
20583267
162734118.xls.ms_office1
None
Cell
This paramter is valid only when [PARA]Dy nShutDown Type[/PAR A] is set to Conditional ShutDown.
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
20593267
162734118.xls.ms_office1
D0
D0
Cell
None
N(For the UE in idle mode, the larger the value of this parameter is, the smaller the Ping-Pong effect in the cell Not reselection involved between different Hierarchy cells. But if the value is to small, the effect of the HCS algorithm is bad.)
Not involved
None
None
RAB
None.
Not involved
Not involved
None
None
RNC
This parameter, [PARA]Use rPriority[/P ARA], [PARA]TH P[/PARA], and [PARA]SPI [/PARA] form an SPI mapping table. None.
Not involved
Not involved
8/7/2013
20603267
162734118.xls.ms_office1
None
None
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
None
Cell
None
Not involved
Not involved
8/7/2013
20613267
162734118.xls.ms_office1
ms
10
10
NodeB
None
Not involved
Not involved
None
None
IP Path
None
Not involved
Not involved
Not involved
None
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB, IUR or IUCS, this parameter is valid. When the value of Not [PARA]ITF involved T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB_IUR_I UCS, this parameter is valid. When the value of [PARA]NO DET[/PAR
Not involved
Not involved
8/7/2013
20623267
162734118.xls.ms_office1
None
-(ADD FACHDYN TFS,ADD FACHLOC H,ADD FACH) 1(ADD RACHDYN TFS,ADD RACH) 3(ADD PCH,ADD PCHDYNT FS) 0(ADD BCH)
None(ADD FACHDYN TFS,ADD FACHLOC H,ADD FACH) 1(ADD RACHDYN Transport TFS,ADD channel RACH) 3(ADD PCH,ADD PCHDYNT FS) 0(ADD BCH)
None
Not involved
Not involved
Not involved
None
None
RAB
None.
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
None
None
RAB
None.
Not involved
Not involved
None
None
RAB
None.
Not involved
Not involved
8/7/2013
20633267
162734118.xls.ms_office1
None
Not involved
Not involved
8/7/2013
20643267
162734118.xls.ms_office1
Cell
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
255
255
Cell
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
8/7/2013
20653267
162734118.xls.ms_office1
255
255
Cell
None
N(impact on Cell Selection Not and involved Reselection of the UE in idle mode)
Not involved
None
None
SAALLNK/ AAL2PAT H/IPOAPV C/VPCLCX None using this ATM traffic record index
Not involved
Not involved
Not involved
ms
Not involved
Not involved
8/7/2013
20663267
162734118.xls.ms_office1
ms
Cell(ADD CELLINTR AFREQHO ) None RNC(SET SMLC,SET INTRAFRE D1280(SET QHO) SMLC)
Not involved
Not involved
8/7/2013
20673267
162734118.xls.ms_office1
ms
Not involved
Not involved
8/7/2013
20683267
162734118.xls.ms_office1
ms
Not involved
Not involved
8/7/2013
20693267
162734118.xls.ms_office1
ms
Not involved
Not involved
8/7/2013
20703267
162734118.xls.ms_office1
ms
Not involved
Not involved
8/7/2013
20713267
162734118.xls.ms_office1
ms
D640(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO D640 NCOV) -(SET INTERFRE QHONCOV )
Cell(ADD CELLMBD RINTERFR EQ,ADD CELLINTE RFREQHO None NCOV) RNC(SET INTERFRE QHONCOV )
Not involved
Not involved
8/7/2013
20723267
162734118.xls.ms_office1
ms
Not involved
Not involved
8/7/2013
20733267
162734118.xls.ms_office1
ms
Not involved
Not involved
8/7/2013
20743267
162734118.xls.ms_office1
ms
This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] is set to EVENT_T RIGGER.
Not involved
Not involved
8/7/2013
20753267
162734118.xls.ms_office1
ms
D640(ADD CELLMBD RINTERRA T,ADD CELLINTE D640 RRATHON COV) -(SET INTERRAT HONCOV)
Cell(ADD CELLINTE RRATHON COV) RNC(ADD None CELLMBD RINTERRA T,SET INTERRAT HONCOV)
Not involved
Not involved
8/7/2013
20763267
162734118.xls.ms_office1
ms
D240
RNC
None
Not involved
Not involved
8/7/2013
20773267
162734118.xls.ms_office1
ms
D240
RNC
None
Not involved
Not involved
None
None
Ethernet port
None
Not involved
Not involved
Not involved
None
None
Ethernet port
None
Not involved
Not involved
Not involved
None
None
Ethernet port
None
Not involved
Not involved
Not involved
8/7/2013
20783267
162734118.xls.ms_office1
50
50
Cell
None
Not involved
Not involved
None
None
RNC
This paramter is valid only when [PARA]Cel lChoice[/PA RA] is set to 3GCELL.
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN.
None
None
RNC
None
Not involved
Not involved
8/7/2013
20793267
162734118.xls.ms_office1
When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN. When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN. This parameter cannot be modified.
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
LGC port
None
Not involved
Not involved
Not involved
8/7/2013
20803267
162734118.xls.ms_office1
None
None
Cell
When the value of [PARA]BT[ /PARA] in [MML]LOP E1T1[/MM L] is set to Y AEUa or PEUa, the value of [PARA]TS[ /PARA] should be set.
Cell
The loopback test may Less than 5 interrupt the minutes services carried on this link.
8/7/2013
20813267
162734118.xls.ms_office1
When the value of [PARA]BT[ /PARA] in [MML]SET E1T1[/MM L] is set to AEUa, the value of [PARA]LS[ /PARA] in [MML]SET E1T1[/MM L] is set to SINGLE and the Not value of involved [PARA]LN KT[/PARA] in [MML]SET E1T1[/MM L] is set to E1_DOUB LE_FRAM E or E1_CRC4_ MULTI_FR AME , the value of [PARA]TS 16ENABLE
None
OFF
E1T1 link
Not involved
Not involved
When the BT is AEUa and the LNKT is E1_DOUB LE_FRAM E or E1_CRC4_ MULTI_FR AME,you could set 16TimeSlot Switch.
8/7/2013
20823267
162734118.xls.ms_office1
1.The time slot 0 can not be configured. 2.When the value of [PARA]BR DTYPE[/P ARA] in [MML]AD D PPPLNK[/ PPP MML]is set Link(ADD to PEUa, PPPLNK) the value E1/T1 of[PARA]T Not port(ADD SBITMAP[/ involved FRALNK) PARA] RNC(ADD must be set. MPLNK) 3.When the value of [PARA]BR DTYPE[/P ARA] in [MML]AD D MPLNK[/M ML]is set to PEUa, the value of[PARA]T SBITMAP[/
None
None
Not involved
Not involved
None
None
E1/T1
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
8/7/2013
20833267
162734118.xls.ms_office1
The value of the parameter must satisfy the function below: [PARA]NF Cell(ADD astSpdEst[/ CELLHCS PARA]*[P HO) ARA]TSlo RNC(SET wSpdEst[/P HCSHO) ARA] >= [PARA]NSl owSpdEst[/ PARA]*[P ARA]TFast SpdEst[/PA RA]. This parameter is valid when UE [PARA]Tst Switch[/PA RA] is set to ON.
Not involved
Not involved
None
None
Not involved
Not involved
30
30
Ethernet port
None
Not involved
Not involved
Not involved
None
OFF
RNC
None
Not involved
Not involved
ms
None
RNC
When the value of [PARA]ST PMODE[/P ARA] in [MML]STR Y CPUUSAG ETST[/MM L] is set to YES, this parameter is valid.
8/7/2013
20843267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. This parameter cannot be modified. The parameter modificatio n has no impact on the equipment.
64
64
Ethernet port
None
Not involved
Not involved
Not involved
kbit/s
None
LGC port
None
Transmissio Not n Resource involved Managemen t N (No impact on the UE in idle mode)
Not involved
kbit/s
None
IP Path
None
Not involved
Not involved
kbit/s
None
When [PARA]GR PT[/PARA] in [MML]AD D RSCGRP[/ MML] is set to ATM or [PARA]BW MODE[/PA RA] is set to FULL_DUP LEX, this Transmissio parameter is n resource valid;The group sum of [PARA]Tx Bw[/PARA] and [PARA]Rx Bw[/PARA] in [MML]AD D RSCGRP[/ MML] of upper class RSCGRP can not less than the
Not involved
Not involved
8/7/2013
20853267
162734118.xls.ms_office1
None
None
Cell
None
Cell
The cell should be deactivated in advance. The parameter modificatio n has no impact on the equipment. This parameter cannot be modified.
ms
500
500
Ethernet port
None
Not involved
Not involved
Not involved
ms
30
30
Ethernet port
None
Not involved
Not involved
Not involved
None
None
IPoA PVC(ADD IPOAPVC) AAL2 Path(ADD AAL2PAT H) SAAL(AD D SAALLNK) RNC(ADD VPCLCX)
1.When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D IPOAPVC[/ MML] is set to UNI, IMA, FRAATM, NCOPT, or ATMLGCP ORT, this parameter is required. 2.When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D AAL2PAT H[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATMLGCP ORT, this
Not involved
Not involved
8/7/2013
20863267
162734118.xls.ms_office1
None
None
None
If the mode is not set back, will ETHPORT/ interrupt VP/LGCPO service until RT etc. it is set back.
None
None
Cell
None
Cell
8/7/2013
20873267
162734118.xls.ms_office1
None
None
Cell
When [PARA]UA RFCNUplin kInd[/PAR A] is set to TRUE, this parameter need to manual Y configure;or else need to automatic configure with the restriction relation UL and DL frequency.
Cell
8/7/2013
20883267
162734118.xls.ms_office1
None
None
Cell
None
Cell
ms
5000
RNC
None
Not involved
Not involved
The modificatio n of the timer involves the peer end. For details, refer to ITUT Q2630.1/IT U-T Q2630.2.
byte
1031
1031
IP Path
When the value of [PARA]UD PMUXMO DRECV[/P ARA] in [MML]AD D IPPATH[/ MML] is set to RTPCOMP, this parameter is valid.
Not involved
Not involved
8/7/2013
20893267
162734118.xls.ms_office1
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D IPPATH[/ MML] is set to IUCS, this parameter is valid.
Not involved
Not involved
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D IPPATH[/ MML] is set to IUCS, this parameter is valid.
Not involved
Not involved
IP Path
When the value of [PARA]UD PMUXMO DRECV[/P ARA] in [MML]AD D IPPATH[/ MML] is set to RTPCOMP, this parameter is valid.
Not involved
Not involved
8/7/2013
20903267
162734118.xls.ms_office1
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
ms
5000
RNC
None
Not involved
Not involved
8/7/2013
20913267
162734118.xls.ms_office1
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
ms
5000
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Not involved
ms
1000
1000
E1T1 Link
When the value of [PARA]BT[ /PARA] in [MML]STR Not E1T1TST[/ involved MML] is set to AEUa or PEUa, this parameter is valid. Not involved
Not involved
Not involved
None
None
SRB
None
Not involved
Not involved
8/7/2013
20923267
162734118.xls.ms_office1
None
50
RNC
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.
Not involved
Not involved
8/7/2013
20933267
162734118.xls.ms_office1
ms
Not involved
Not involved
8/7/2013
20943267
162734118.xls.ms_office1
ms
Not involved
Not involved
8/7/2013
20953267
162734118.xls.ms_office1
ms
Not involved
Not involved
8/7/2013
20963267
162734118.xls.ms_office1
ms
Not involved
Not involved
8/7/2013
20973267
162734118.xls.ms_office1
ms
Not involved
Not involved
None
10
RNC
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.
Not involved
Not involved
8/7/2013
20983267
162734118.xls.ms_office1
None
None
Not involved
Not involved
8/7/2013
20993267
162734118.xls.ms_office1
kbit/s
If this parameter is set through both the [MML]SET FRCCHLT YPEPARA[ /MML] and [MML]AD D CELLFRC[/ MML] commands, the parameter set through the [MML]AD D CELLFRC[/ MML] command takes precedence over that set through the [MML]SET FRCCHLT YPEPARA[ /MML] command.
Not involved
Not involved
8/7/2013
21003267
162734118.xls.ms_office1
kbit/s
D64
RNC
This parameter can be used for selection of the initial rate for BE services only when the DCCC_SW ITCH under the [PARA]Chs witch[/PAR A] parameter is set to on through the [MML]SET CORRMAL GOSWITC H[/MML] command.
Not involved
Not involved
kbit/s
D608
RNC
None
Not involved
Not involved
8/7/2013
21013267
162734118.xls.ms_office1
ms
Not involved
Not involved
ms
Not involved
Not involved
8/7/2013
21023267
162734118.xls.ms_office1
ms
Not involved
Not involved
ms
Not involved
Not involved
8/7/2013
21033267
162734118.xls.ms_office1
ms
Not involved
Not involved
None
RNC
None
Not involved
Not involved
8/7/2013
21043267
162734118.xls.ms_office1
None
Cell
None
Not involved
Not involved
8/7/2013
21053267
162734118.xls.ms_office1
None
83
83
Cell
The value of this parameter must satisfy the following relationship: [PARA]Ul OlcTrigThd [/PARA](Se e [MML]AD D CELLLDM [/MML]) >= [PARA]Ul CellTotalTh d[/PARA]; [PARA]Ul CellTotalTh d[/PARA] > [PARA]Ul NonCtrlThd ForHo[/PA RA] .
Not involved
Not involved
None
SF/2
SF/2
NodeB
None.
Not involved
Not involved
8/7/2013
21063267
162734118.xls.ms_office1
Not involved
Not involved
Not involved
Not involved
8/7/2013
21073267
162734118.xls.ms_office1
When the value of UlMidRate Calc is HAND_AP POINT,the following relationship must be satisfied: [PARA]Ul DcccRateTh d[/PARA] <= [PARA]Ul MidRateTh
kbit/s
D64
RNC
Not involved
Not involved
None
SILENT
RAB
None.
Not involved
Not involved
kbit/s
This parameter is available if Cell(ADD the value of CELLDCC [PARA]BE C) QosPerform RNC(SET [/PARA] in DCCC) [MML]SET QOSACT[/ MML] is YES.
Not involved
Not involved
8/7/2013
21083267
162734118.xls.ms_office1
For the BE users with the same [PARA]Tra fficClass[/P ARA], [PARA]TH PClass[/PA RA] and [PARA]Bea rType[/PAR A] values, make sure: [PARA]Ul GBR[/PAR A] of GOLD users ([PARA]Us erPriority[/P ARA] is set to GOLD) >= [PARA]Ul GBR[/PAR A] of SILVER users ([PARA]Us erPriority[/P ARA] is set to SILVER)
kbit/s
D64
RNC
Not involved
Not involved
8/7/2013
21093267
162734118.xls.ms_office1
None
SF16
SF16
Cell
The value of this parameter must satisfy the following relationship: [PARA]Ul HoCeResvS f[/PARA] >= [PARA]UlL drCreditSfR esThd[/PA RA] .
Not involved
Not involved
8/7/2013
21103267
162734118.xls.ms_office1
per cent
Cell
None
Not involved
Not involved
None
SCHEDUL RNC ED
None
Not involved
Not involved
None
10
RNC
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.
Not involved
Not involved
8/7/2013
21113267
162734118.xls.ms_office1
bit/s
200000
200000
Cell
None
Not involved
Not involved
8/7/2013
21123267
162734118.xls.ms_office1
per cent
20
20
Cell
None
Not involved
Not involved
8/7/2013
21133267
162734118.xls.ms_office1
None
Cell
None
Not involved
Not involved
None
RNC
None
Not involved
Not involved
8/7/2013
21143267
162734118.xls.ms_office1
Not involved
Not involved
8/7/2013
21153267
162734118.xls.ms_office1
None
SF8
SF8
The value Cell(ADD of this CELLLDR) parameter must not be NodeB(AD larger than D [PARA]Ul NODEBLD HoCeResvS R) f[/PARA].
Not involved
Not involved
8/7/2013
21163267
162734118.xls.ms_office1
None
no action
no action
Cell
None
Not involved
Not involved
8/7/2013
21173267
162734118.xls.ms_office1
Not involved
Not involved
8/7/2013
21183267
162734118.xls.ms_office1
None
Not involved
Not involved
8/7/2013
21193267
162734118.xls.ms_office1
Not involved
Not involved
8/7/2013
21203267
162734118.xls.ms_office1
Not involved
Not involved
8/7/2013
21213267
162734118.xls.ms_office1
per cent
45
45
Cell
The value of this parameter must satisfy the following relationship: [PARA]UlL drTrigThd[/ PARA] >= [PARA]UlL drRelThd[/P ARA]; [PARA]Ul OlcRelThd[ /PARA] >= [PARA]UlL drRelThd[/P ARA].
Not involved
Not involved
8/7/2013
21223267
162734118.xls.ms_office1
None
Not involved
Not involved
8/7/2013
21233267
162734118.xls.ms_office1
None
no action
no action
Cell
None
Not involved
Not involved
8/7/2013
21243267
162734118.xls.ms_office1
Not involved
Not involved
8/7/2013
21253267
162734118.xls.ms_office1
Not involved
Not involved
8/7/2013
21263267
162734118.xls.ms_office1
per cent
55
55
Cell
The value of this parameter must satisfy the following relationship: [PARA]UlL drTrigThd[/ PARA] >= [PARA]UlL drRelThd[/P ARA]; [PARA]Ul OlcTrigThd [/PARA] > [PARA]UlL drTrigThd[/ PARA]; [PARA]Ul NonCtrlThd ForOther[/P ARA](See [MML]AD D CELLCAC[ /MML]) >= [PARA]UlL drTrigThd[/ PARA].
Not involved
Not involved
None
D64
D64
NodeB
None.
Not involved
Not involved
8/7/2013
21273267
162734118.xls.ms_office1
None
Not involved
Not involved
None
The parameter is valid when [PARA]Ul RateUpAdj Level[/PAR A] in [MML]SET DCCC[/M ML] is set to 3_Rates, or [PARA]Ul RateDnAdj Level[/PAR A] in [MML]SET DCCC[/M ML] is set
Not involved
Not involved
8/7/2013
21283267
162734118.xls.ms_office1
The parameter is valid when [PARA]Ul MidRateCal c[/PARA] in [MML]SET DCCC[/M ML] is set to HAND_AP POINT, and the following relationship must be satisfied: [PARA]Ul DcccRateTh d[/PARA] <= [PARA]Ul The following relationship must be satisfied: [PARA]Ul ModeChang eTimerLen[ /PARA] <= [PARA]Dl ModeChang eTimerLen[ /PARA]. This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GOLD, SILVER, or COPPER.
kbit/s
D128
RNC
Not involved
Not involved
ms
1000
RNC
Not involved
Not involved
None
100
RNC
Not involved
Not involved
8/7/2013
21293267
162734118.xls.ms_office1
None
75
75
Cell
The value of this parameter must satisfy the following relationship: [PARA]Ul NonCtrlThd ForHo[/PA RA] > [PARA]Ul NonCtrlThd ForAMR[/P ARA]; [PARA]Ul NonCtrlThd ForAMR[/P ARA] > [PARA]Ul NonCtrlThd ForOther[/P ARA].
Not involved
Not involved
8/7/2013
21303267
162734118.xls.ms_office1
None
80
80
Cell
The value of this parameter must satisfy the following relationship: [PARA]Ul CellTotalTh d[/PARA] > [PARA]Ul NonCtrlThd ForHo[/PA RA] ; [PARA]Ul NonCtrlThd ForHo[/PA RA] > [PARA]Ul NonCtrlThd ForAMR[/P ARA]; [PARA]Ul NonCtrlThd ForHo[/PA RA] > [PARA]Ul NonCtrlThd ForNonAM R[/PARA] .
Not involved
Not involved
8/7/2013
21313267
162734118.xls.ms_office1
None
75
75
Cell
The value of this parameter must satisfy the following relationship: [PARA]Ul NonCtrlThd ForHo[/PA RA] > [PARA]Ul NonCtrlThd ForNonAM R[/PARA]; [PARA]Ul NonCtrlThd ForNonAM R[/PARA] > [PARA]Ul NonCtrlThd ForOther[/P ARA].
Not involved
Not involved
8/7/2013
21323267
162734118.xls.ms_office1
None
60
60
Cell
The value of this parameter must satisfy the following relationship: [PARA]Ul NonCtrlThd ForAMR[/P ARA] > [PARA]Ul NonCtrlThd ForOther[/P ARA]; [PARA]Ul NonCtrlThd ForNonAM R[/PARA] > [PARA]Ul NonCtrlThd ForOther[/P ARA]; [PARA]Ul NonCtrlThd ForOther[/P ARA] >= [PARA]UlL drTrigThd[/ PARA].
Not involved
Not involved
None
RNC
None
Not involved
Not involved
8/7/2013
21333267
162734118.xls.ms_office1
None
Cell
None
Not involved
Not involved
8/7/2013
21343267
162734118.xls.ms_office1
None
Cell
None
Not involved
Not involved
None
D1
RNC
None
Not involved
Not involved
8/7/2013
21353267
162734118.xls.ms_office1
per cent
85
85
Cell
The value of this parameter must satisfy the following relationship: [PARA]Ul OlcTrigThd [/PARA] >= [PARA]Ul OlcRelThd[ /PARA]; [PARA]Ul OlcRelThd[ /PARA] >= [PARA]UlL drRelThd[/P ARA].
Not involved
Not involved
8/7/2013
21363267
162734118.xls.ms_office1
None
Cell
None
Not involved
Not involved
None
100
RNC
None
Not involved
Not involved
8/7/2013
21373267
162734118.xls.ms_office1
per cent
95
95
Cell
The value of this parameter must satisfy the following relationship: [PARA]Ul OlcTrigThd [/PARA] > [PARA]UlL drTrigThd[/ PARA]; [PARA]Ul OlcTrigThd [/PARA] >= [PARA]Ul OlcRelThd[ /PARA]; [PARA]Ul OlcTrigThd [/PARA] >= [PARA]Ul NonCtrlThd ForHo[/PA RA](See [MML]AD D CELLCAC[ /MML]).
Not involved
Not involved
8/7/2013
21383267
162734118.xls.ms_office1
Not involved
Not involved
8/7/2013
21393267
162734118.xls.ms_office1
Not involved
Not involved
None
NO
RNC
Not involved
Not involved
None
NO
RNC
Not involved
Not involved
8/7/2013
21403267
162734118.xls.ms_office1
None
NO
RNC
Not involved
Not involved
None
Not involved
Not involved
8/7/2013
21413267
162734118.xls.ms_office1
None
NO
RNC
Not involved
Not involved
None
NO
RNC
Not involved
Not involved
None
NO
RNC
Not involved
Not involved
None
NO
RNC
Not involved
Not involved
8/7/2013
21423267
162734118.xls.ms_office1
None
3_Rates
RNC
None
Not involved
Not involved
None
3_Rates
RNC
None
Not involved
Not involved
None
Not involved
Not involved
8/7/2013
21433267
162734118.xls.ms_office1
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to NOPRIORI TY.
None
10
RNC
Not involved
Not involved
None
SCHEDUL RNC ED
None
Not involved
Not involved
None
100
RNC
This parameter is valid only when [PARA]AF SetObj[/PA RA] is set to GGOLD, SILVER, or COPPER.
Not involved
Not involved
kbit/s
D256
RNC
None.
Not involved
Not involved
8/7/2013
21443267
162734118.xls.ms_office1
None
NONSCHEDUL RNC ED
None
Not involved
Not involved
dB
None
RNC
Not involved
Not involved
8/7/2013
21453267
162734118.xls.ms_office1
dB
None
RNC
Restrictions : 1) [PARA]UlT hd6A2[/PA RA] <= [PARA]UlT hd6B2[/PA RA]; 2) [PARA]UlT hd6A2[/PA RA] > [PARA]UlT hd6B1[/PA RA]
Not involved
Not involved
dB
None
RNC
Restrictions : 1) [PARA]UlT hd6A1[/PA RA] <= [PARA]UlT hd6B1[/PA RA]; 2) [PARA]UlT hd6A2[/PA RA] > [PARA]UlT hd6B1[/PA RA]
Not involved
Not involved
8/7/2013
21463267
162734118.xls.ms_office1
dB
None
RNC
Not involved
Not involved
8/7/2013
21473267
162734118.xls.ms_office1
None
80
80
Cell
None
Not involved
Not involved
dB
RNC
This parameter can only be set to 1 when the [PARA]Pwr CtrlAlg[/PA RA] parameter is set to ALGORIT HM2.
Not involved
Not involved
8/7/2013
21483267
162734118.xls.ms_office1
ms
Not involved
Not involved
ms
Not involved
Not involved
8/7/2013
21493267
162734118.xls.ms_office1
ms
Not involved
Not involved
None
Cell
Not involved
Not involved
None
Cell
Not involved
Not involved
8/7/2013
21503267
162734118.xls.ms_office1
Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_CEN TER; [PARA]Un certSemiMa jor[/PARA] >=[PARA] UncertSemi Minor[/PA RA]. Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_CEN TER; [PARA]Un certSemiMa jor[/PARA] >=[PARA] UncertSemi Minor[/PA RA]. Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_CEN TER; [PARA]Un certSemiMa jor[/PARA] >=[PARA] UncertSemi Minor[/PA RA].
None
Cell
Not involved
Not involved
None
Cell
Not involved
Not involved
None
Cell
Not involved
Not involved
8/7/2013
21513267
162734118.xls.ms_office1
Valid when [PARA]Cel lLocCfgTyp e[/PARA] is set to BOTH or CELL_CEN TER; [PARA]Un certSemiMa jor[/PARA] >=[PARA] UncertSemi Minor[/PA RA].
None
Cell
Not involved
Not involved
None
None
UNILNK
None
Not involved
Not involved
None
RNC
None
None
Adjacent Node
The value of this parameter must be smaller than the value of the [PARA]Rec ountingPeri od[/PARA] parameter under the [MML]SET RNCMBM SPARA[/M ML] command. When the value of [PARA]IsR OOTNODE [/PARA] in [MML]AD D ADJNODE[ /MML] is set to NO, this parameter is valid.
Not involved
Not involved
Not involved
Not involved
Not involved
8/7/2013
21523267
162734118.xls.ms_office1
None
None
When [PARA]ISF IRSTCLAS SE[/PARA] in Transmissio [MML]AD Not n resource D involved group RSCGRP[/ MML] is set to NO, this parameter is valid.
Not involved
Not involved
None
None
LGC port
None
Not involved
None
None
Cell
None
Not involved
Not involved
Not involved
8/7/2013
21533267
162734118.xls.ms_office1
None
None
Cell
None
Not involved
Not involved
Not involved
None
None
Cell
None
Not involved
Not involved
Not involved
8/7/2013
21543267
162734118.xls.ms_office1
None
None
Cell
None
Not involved
Not involved
Not involved
None
None
Cell
None
Not involved
Not involved
Not involved
8/7/2013
21553267
162734118.xls.ms_office1
None
None
Cell
None
Not involved
Not involved
Not involved
None
None
Cell
None
Not involved
Not involved
Not involved
8/7/2013
21563267
162734118.xls.ms_office1
None
None
Cell
None
Not involved
Not involved
Not involved
None
None
Not involved
Not involved
None
None
Cell
None
Not involved
Not involved
Not involved
8/7/2013
21573267
162734118.xls.ms_office1
dB
-12(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) -12 -(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)
Cell(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) RNC(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML] and [PARA]Me asQuantity Of3A[/PAR A] is CPICH_EC/ NO or AUTO.
Not involved
Not involved
8/7/2013
21583267
162734118.xls.ms_office1
dBm
-92(ADD CELLINTE RFREQHO COV) -(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV) -97(ADD CELLINTE RRATHOC OV)
-92(SET INTERFRE QHOCOV, ADD CELLINTE RFREQHO COV) -97(SET INTERRAT HOCOV,A DD CELLINTE RRATHOC OV)
Cell(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) RNC(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML] and [PARA]Me asQuantity Of3A[/PAR A] is CPICH_RS CP or AUTO.
Not involved
Not involved
8/7/2013
21593267
162734118.xls.ms_office1
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]. This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL
dB
-12(ADD CELLINTE RFREQHO COV) -(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV) -13(ADD CELLINTE RRATHOC OV)
-12(SET INTERFRE QHOCOV, ADD CELLINTE RFREQHO COV) -13(SET INTERRAT HOCOV,A DD CELLINTE RRATHOC OV)
Cell(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) RNC(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)
Not involved
Not involved
8/7/2013
21603267
162734118.xls.ms_office1
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML]. This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL
dBm
-92(ADD CELLINTE RFREQHO COV) -(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV) -107(ADD CELLINTE RRATHOC OV)
-92(SET INTERFRE QHOCOV, ADD CELLINTE RFREQHO COV) -107(SET INTERRAT HOCOV,A DD CELLINTE RRATHOC OV)
Cell(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) RNC(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)
Not involved
Not involved
8/7/2013
21613267
162734118.xls.ms_office1
None
This parameter is valid when [PARA]Inte rRatReport Mode[/PAR A] in CPICH_RS Cell(ADD [MML]SET CP(ADD CELLQOS INTERRAT CPICH_RS CELLQOS HO) HOCOV[/ CP HO) RNC(SET MML] or -(SET QOSHO) [MML]AD QOSHO) D CELLINTE RRATHOC OV[/MML] is set to EVENT_T RIGGER.
Not involved
Not involved
8/7/2013
21623267
162734118.xls.ms_office1
dB
-12(ADD CELLINTE RFREQHO COV) -(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV) -13(ADD CELLINTE RRATHOC OV)
-12(SET INTERFRE QHOCOV, ADD CELLINTE RFREQHO COV) -13(SET INTERRAT HOCOV,A DD CELLINTE RRATHOC OV)
Cell(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) RNC(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML] and [PARA]Me asQuantity Of3A[/PAR A] is CPICH_EC/ NO or AUTO.
Not involved
Not involved
8/7/2013
21633267
162734118.xls.ms_office1
dBm
-92(ADD CELLINTE RFREQHO COV) -(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV) -107(ADD CELLINTE RRATHOC OV)
-92(SET INTERFRE QHOCOV, ADD CELLINTE RFREQHO COV) -107(SET INTERRAT HOCOV,A DD CELLINTE RRATHOC OV)
Cell(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) RNC(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)
This parameter is valid when the OVERLAY _SWITCH is ON The OVERLAY _SWITCH is in [PARA]Ho Switch[/PA RA] in [MML]SET CORRMAL GOSWITC H[/MML] and [PARA]Me asQuantity Of3A[/PAR A] is CPICH_RS CP or AUTO.
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN. The parameter modificatio n has no impact on the equipment.
8/7/2013
21643267
162734118.xls.ms_office1
When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN. When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN. The parameter modificatio n has no impact on the equipment. When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN.
None
None
RNC
None
Not involved
Not involved
None
Disable
Disable
RNC
None
Not involved
Not involved
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
8/7/2013
21653267
162734118.xls.ms_office1
None
None
Not involved
Not involved
per cent
RNC
None
Not involved
Not involved
per cent
90
RNC
None
Not involved
Not involved
The parameter modificatio n has no impact on the equipment. The parameter modificatio n has no impact on the equipment.
8/7/2013
21663267
162734118.xls.ms_office1
This parameter, [PARA]Tra fficClass[/P ARA], [PARA]TH P[/PARA], and [PARA]SPI [/PARA] form an SPI mapping table. None.
None
None
RNC
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
When this parameter is modified, the correspondi ng NodeB must be already configured with an ESN. This parameter cannot be modified.
None
None
None
None
SAALLNK/ AAL2PAT H/IPOAPV Not C/VPCLCX None involved using this ATM traffic record index When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D AAL2PAT AAL2 Path H[/MML] is Y set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is valid.
Not involved
Not involved
The configuratio n data must Less than 5 be AAL2 Path minutes consistent with that of the peer end.
8/7/2013
21673267
162734118.xls.ms_office1
When the value of [PARA]LN KT[/PARA] in [MML]AC T VCLCC[/M Not PVC ML] is set involved to SAALLNK, AAL2PAT H, or IPOAPVC, the VCL activating type should This parameter determines whether the parameter SCTP(ADD [PARA]VL SCTPLNK) ANID[/PA Y IP RA] in Path(ADD [MML]AD IPPATH) D SCTPLNK[ /MML] is valid.
None
CC
Not involved
Not involved
None
DISABLE
DISABLE
The services are interrupted until the SCTP link is working normally.
8/7/2013
21683267
162734118.xls.ms_office1
When the value of [PARA]VL ANFlAG[/P ARA] in [MML]AD D IPPATH[/ RNC(ADD MML] is set VLANID) to IP ENABLE, Path(ADD this IPPATH) parameter is Not valid. involved SCTP(ADD When the SCTPLNK) value of Ethernet [PARA]VL port(ADD ANFlAG[/P ETHMA) ARA] in [MML]AD D SCTPLNK[ /MML] is set to ENABLE, this parameter is N (No impact on the UE in idle mode)
None
None
Not involved
Not involved
None
None
RNC
None
Not involved
Not involved
Modify the relationship between VLAN and DSCP may interfere the network.
8/7/2013
21693267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
70
70
RNC
None
Not involved
Not involved
8/7/2013
21703267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or dual stack, the parameter is RT_VBR; transimssio n type is IP or Hybird IP, the parameter is EF. RNC When the interface type is Iur, transmissio n type is ATM, the parameter is RT_VBR; transimssio n type is IP, the parameter is EF. When the interface type is Iu-
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR or IUCS, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modificatio n for the existing user
None
100
100
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
21713267
162734118.xls.ms_office1
When the interface type is Iub, transmissio n type is ATM or IP, the parameter is NULL; transimssio n type is dual stack, the parameter is EF; transimssio RNC n type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmissio n type is ATM or IP, the parameter is NULL. When the interface
None
When the value of [PARA]ITF T[/PARA] in [MML]AD D TRMMAP[/ MML] is set to IUB or IUR, this parameter is valid.
Not involved
Not involved
Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modificatio n succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modificatio n for the existing user
None
RNC
None
Not involved
Not involved
Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type).
8/7/2013
21723267
162734118.xls.ms_office1
Modifiying this parameter will affect the adjacent node configured with this factor table. After the modificatio n succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modificatio n for the existing user
per cent
70
70
RNC
None
Not involved
Not involved
None
DCH
RNC
None.
Not involved
Not involved
None
None
Not involved
Not involved
8/7/2013
21733267
162734118.xls.ms_office1
None
OPEN
OPEN
SRB
None
Not involved
Not involved
Not involved
None
28.00
28.00
SRB
None
Not involved
Not involved
Not involved
None
20.00
20.00
SRB
None
Not involved
Not involved
Not involved
None
None
OPEN
OPEN
SRB
None
Not involved
Not involved
Not involved
None
57.00
57.00
SRB
None
Not involved
Not involved
Not involved
None
42.00
42.00
SRB
None
Not involved
Not involved
Not involved
None
None
None
RNC
None
Not involved
Not involved
Not involved
None
None
When the value of [PARA]CA RRYT[/PA RA] in [MML]AD D AAL2PAT AAL2 Path H[/MML] is Y set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is valid.
The configuratio n data must Less than 5 be AAL2 Path minutes consistent with that of the peer end.
8/7/2013
21743267
162734118.xls.ms_office1
None
Cell(ADD CELLSETU P,ADD QUICKCE None LLSETUP) FALSE(AD FALSE(AD RNC(ADD D D NRNCCEL NRNCCEL NRNCCEL L) L) L)
Not involved
Not involved
None
NO
RNC
None
Not involved
Not involved
None
40
RNC
None
Not involved
Not involved
8/7/2013
21753267
162734118.xls.ms_office1
None
100
RNC
None
Not involved
Not involved
None
60
RNC
None
Not involved
Not involved
None
200
RNC
None
Not involved
Not involved
8/7/2013
21763267
162734118.xls.ms_office1
ms
3000
RNC
Not involved
Not involved
None
OPEN
OPEN
SRB
None
Not involved
Not involved
Not involved
None
8/7/2013
21773267
162734118.xls.ms_office1
None
Not involved
Not involved
8/7/2013
21783267
162734118.xls.ms_office1
None
0(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) 0 -(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)
Cell(ADD CELLINTE RRATHOC OV,ADD CELLINTE RFREQHO COV) None RNC(SET INTERRAT HOCOV,SE T INTERFRE QHOCOV)
Not involved
Not involved
None
SAAL
None
Not involved
Not involved
None
None
Not involved
Not involved
Not involved
8/7/2013
21793267
162734118.xls.ms_office1
None
Active
Active
RNC
None
Not involved
Not involved
Not involved
None
600
Port
When the value of [PARA]BT[ /PARA] in [MML]SET E1T1[/MM L] is set to AEUa/PEU a and the value of [PARA]LS[ /PARA] is set to ALL,the value of [PARA]WO RKMODE[/ PARA] can be set to E1_UNBA, E1_BA,or T1. When the value of [PARA]BT[ /PARA] in [MML]SET E1T1[/MM L] is set to AOUa/P0U a,the value of [PARA]WO When the value of [PARA]RT[ /PARA] in [MML]SET MSP[/MML ] is set to REVERTIV E, the recovery time should be set.
Not involved
Not involved
Not involved
To convert a link from E1 to T1 or from T1 to E1 on the AOUa/POU a, you should reset the board.
Not involved
Not involved
Not involved
8/7/2013
21803267
162734118.xls.ms_office1
None
RNC
This parameter defines an offset relative to the [PARA]NC ountingThd[ /PARA] parameter.
Not involved
Not involved
180
RNC
None
Not involved
Not involved
8/7/2013
21813267
162734118.xls.ms_office1
None
None
RNC
None
RNC
8/7/2013
21823267
162734118.xls.ms_office1
Access
Attribute
Introduced in Version
Transport
RAN11.0
Radio
RAN11.0
Radio
Radio
Radio
Radio
8/7/2013
21833267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
Transport
8/7/2013
21843267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
21853267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
21863267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
21873267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
21883267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Equipment
8/7/2013
21893267
162734118.xls.ms_office1
Equipment
Radio
RAN11.0
Radio
Radio
Radio
Equipment
8/7/2013
21903267
162734118.xls.ms_office1
Equipment
8/7/2013
21913267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
21923267
162734118.xls.ms_office1
Equipment
Radio
RAN11.0
Transport
8/7/2013
21933267
162734118.xls.ms_office1
Radio
Equipment
Equipment
RAN11.0
8/7/2013
21943267
162734118.xls.ms_office1
Equipment
Radio
8/7/2013
21953267
162734118.xls.ms_office1
Radio
8/7/2013
21963267
162734118.xls.ms_office1
Radio
8/7/2013
21973267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
21983267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
21993267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
22003267
162734118.xls.ms_office1
Radio
8/7/2013
22013267
162734118.xls.ms_office1
Transport
RAN11.0
Equipment
8/7/2013
22023267
162734118.xls.ms_office1
Equipment
RAN11.0
Equipment
8/7/2013
22033267
162734118.xls.ms_office1
Equipment
Equipment
8/7/2013
22043267
162734118.xls.ms_office1
Equipment
RAN11.0
Equipment
Equipment
Radio
RAN11.0
Transport
8/7/2013
22053267
162734118.xls.ms_office1
Radio
Equipment
Equipment
Radio
Radio
Radio
8/7/2013
22063267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
Radio
Radio
Radio
8/7/2013
22073267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
Transport
RAN11.0
8/7/2013
22083267
162734118.xls.ms_office1
Transport
RAN11.0
Equipment
RAN11.0
Equipment
8/7/2013
22093267
162734118.xls.ms_office1
Equipment
Radio
8/7/2013
22103267
162734118.xls.ms_office1
Transport
Transport
Transport
RAN11.0
Transport
8/7/2013
22113267
162734118.xls.ms_office1
Transport
Radio
8/7/2013
22123267
162734118.xls.ms_office1
Radio
Radio
Equipment
8/7/2013
22133267
162734118.xls.ms_office1
Equipment
RAN11.0
Equipment
Equipment
8/7/2013
22143267
162734118.xls.ms_office1
Radio
Equipment
Transport
RAN11.0
8/7/2013
22153267
162734118.xls.ms_office1
Transport
RAN11.0
Equipment
Equipment
Radio
8/7/2013
22163267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
22173267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
22183267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
22193267
162734118.xls.ms_office1
Radio
Transport
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
22203267
162734118.xls.ms_office1
Radio
8/7/2013
22213267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
22223267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
22233267
162734118.xls.ms_office1
Radio
8/7/2013
22243267
162734118.xls.ms_office1
Radio
8/7/2013
22253267
162734118.xls.ms_office1
Radio
8/7/2013
22263267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
22273267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
22283267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
22293267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
22303267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
22313267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
22323267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
22333267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
22343267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
22353267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
22363267
162734118.xls.ms_office1
Radio
8/7/2013
22373267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
22383267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
22393267
162734118.xls.ms_office1
Radio
Radio
Radio
RAN11.0
8/7/2013
22403267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
22413267
162734118.xls.ms_office1
Radio
8/7/2013
22423267
162734118.xls.ms_office1
Radio
8/7/2013
22433267
162734118.xls.ms_office1
Radio
8/7/2013
22443267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
22453267
162734118.xls.ms_office1
Radio
Radio
Transport
RAN11.0
8/7/2013
22463267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
22473267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
22483267
162734118.xls.ms_office1
Radio
8/7/2013
22493267
162734118.xls.ms_office1
Radio
8/7/2013
22503267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
22513267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
22523267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
22533267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
22543267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
22553267
162734118.xls.ms_office1
Transport
Equipment
Equipment
RAN11.0
Equipment
Equipment
Transport
Transport
8/7/2013
22563267
162734118.xls.ms_office1
Radio
Equipment
Transport
Transport
8/7/2013
22573267
162734118.xls.ms_office1
Equipment
Equipment
Equipment
Equipment
Transport
Equipment
8/7/2013
22583267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
22593267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
22603267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
22613267
162734118.xls.ms_office1
Transport
8/7/2013
22623267
162734118.xls.ms_office1
Transport
8/7/2013
22633267
162734118.xls.ms_office1
Transport
8/7/2013
22643267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
22653267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
22663267
162734118.xls.ms_office1
Transport
8/7/2013
22673267
162734118.xls.ms_office1
Transport
8/7/2013
22683267
162734118.xls.ms_office1
Transport
8/7/2013
22693267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
22703267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
22713267
162734118.xls.ms_office1
Transport
8/7/2013
22723267
162734118.xls.ms_office1
Transport
8/7/2013
22733267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
22743267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
Radio
Radio
RAN11.0
8/7/2013
22753267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
Equipment
Transport
8/7/2013
22763267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
22773267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
22783267
162734118.xls.ms_office1
Equipment
Transport
8/7/2013
22793267
162734118.xls.ms_office1
Equipment
Equipment
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
22803267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
22813267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
22823267
162734118.xls.ms_office1
Transport
Transport
Equipment
Equipment
8/7/2013
22833267
162734118.xls.ms_office1
Transport
RAN11.0
Radio
Equipment
8/7/2013
22843267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
22853267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
8/7/2013
22863267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
Transport
RAN11.0
8/7/2013
22873267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
Transport
Transport
Radio
RAN11.0
Equipment
8/7/2013
22883267
162734118.xls.ms_office1
Equipment
RAN11.0
Radio
RAN11.0
8/7/2013
22893267
162734118.xls.ms_office1
Radio
Equipment
Equipment
RAN11.0
8/7/2013
22903267
162734118.xls.ms_office1
Equipment
Equipment
RAN11.0
8/7/2013
22913267
162734118.xls.ms_office1
Equipment
Equipment
RAN11.0
Radio
8/7/2013
22923267
162734118.xls.ms_office1
Radio
Radio
Equipment
Equipment
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
22933267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
Radio
RAN11.0
Radio
8/7/2013
22943267
162734118.xls.ms_office1
Radio
Radio
Equipment
8/7/2013
22953267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
22963267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
22973267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
22983267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
22993267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23003267
162734118.xls.ms_office1
Radio
8/7/2013
23013267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
23023267
162734118.xls.ms_office1
Transport
Radio
Transport
RAN11.0
Transport
8/7/2013
23033267
162734118.xls.ms_office1
Transport
Transport
Transport
RAN11.0
Radio
8/7/2013
23043267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23053267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
23063267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23073267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
Radio
8/7/2013
23083267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23093267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23103267
162734118.xls.ms_office1
Radio
Transport
RAN11.0
Equipment
8/7/2013
23113267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23123267
162734118.xls.ms_office1
Radio
8/7/2013
23133267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23143267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23153267
162734118.xls.ms_office1
Equipment
Equipment
Transport
Equipment
Radio
8/7/2013
23163267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
Radio
8/7/2013
23173267
162734118.xls.ms_office1
Radio
Radio
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
23183267
162734118.xls.ms_office1
Radio
RAN11.0
Equipment
Radio
RAN11.0
8/7/2013
23193267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23203267
162734118.xls.ms_office1
Radio
8/7/2013
23213267
162734118.xls.ms_office1
Radio
8/7/2013
23223267
162734118.xls.ms_office1
Radio
8/7/2013
23233267
162734118.xls.ms_office1
Radio
8/7/2013
23243267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23253267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
Transport
Transport
Transport
8/7/2013
23263267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
23273267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
23283267
162734118.xls.ms_office1
Transport
8/7/2013
23293267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
23303267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
23313267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
23323267
162734118.xls.ms_office1
Transport
Radio
8/7/2013
23333267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
23343267
162734118.xls.ms_office1
Equipment
RAN11.0
Radio
8/7/2013
23353267
162734118.xls.ms_office1
Radio
8/7/2013
23363267
162734118.xls.ms_office1
Radio
8/7/2013
23373267
162734118.xls.ms_office1
Radio
8/7/2013
23383267
162734118.xls.ms_office1
Radio
8/7/2013
23393267
162734118.xls.ms_office1
Radio
8/7/2013
23403267
162734118.xls.ms_office1
Radio
8/7/2013
23413267
162734118.xls.ms_office1
Radio
8/7/2013
23423267
162734118.xls.ms_office1
Radio
Transport
Radio
Radio
8/7/2013
23433267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
23443267
162734118.xls.ms_office1
Radio
8/7/2013
23453267
162734118.xls.ms_office1
Radio
Transport
8/7/2013
23463267
162734118.xls.ms_office1
Equipment
Equipment
Radio
8/7/2013
23473267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Radio
8/7/2013
23483267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
23493267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
23503267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
23513267
162734118.xls.ms_office1
Transport
RAN11.0
Equipment
8/7/2013
23523267
162734118.xls.ms_office1
Radio
8/7/2013
23533267
162734118.xls.ms_office1
Equipment
Equipment
8/7/2013
23543267
162734118.xls.ms_office1
Equipment
8/7/2013
23553267
162734118.xls.ms_office1
Equipment
Radio
RAN11.0
8/7/2013
23563267
162734118.xls.ms_office1
Radio
8/7/2013
23573267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
23583267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
23593267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
23603267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
23613267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
23623267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
23633267
162734118.xls.ms_office1
Radio
Radio
Equipment
8/7/2013
23643267
162734118.xls.ms_office1
Equipment
Equipment
Equipment
Transport
Radio
8/7/2013
23653267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
23663267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23673267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
23683267
162734118.xls.ms_office1
Radio
8/7/2013
23693267
162734118.xls.ms_office1
Radio
Equipment
Radio
8/7/2013
23703267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23713267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
RAN11.0
8/7/2013
23723267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23733267
162734118.xls.ms_office1
Radio
Transport
Transport
8/7/2013
23743267
162734118.xls.ms_office1
Transport
Transport
Transport
Equipment
Radio
8/7/2013
23753267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
23763267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Radio
Radio
8/7/2013
23773267
162734118.xls.ms_office1
Radio
8/7/2013
23783267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23793267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Radio
8/7/2013
23803267
162734118.xls.ms_office1
Radio
8/7/2013
23813267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23823267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
23833267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23843267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23853267
162734118.xls.ms_office1
Radio
8/7/2013
23863267
162734118.xls.ms_office1
Radio
8/7/2013
23873267
162734118.xls.ms_office1
Radio
8/7/2013
23883267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23893267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
23903267
162734118.xls.ms_office1
Radio
8/7/2013
23913267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
23923267
162734118.xls.ms_office1
Radio
8/7/2013
23933267
162734118.xls.ms_office1
Radio
8/7/2013
23943267
162734118.xls.ms_office1
Radio
8/7/2013
23953267
162734118.xls.ms_office1
Radio
8/7/2013
23963267
162734118.xls.ms_office1
Radio
8/7/2013
23973267
162734118.xls.ms_office1
Radio
8/7/2013
23983267
162734118.xls.ms_office1
Radio
8/7/2013
23993267
162734118.xls.ms_office1
Radio
8/7/2013
24003267
162734118.xls.ms_office1
Radio
8/7/2013
24013267
162734118.xls.ms_office1
Radio
8/7/2013
24023267
162734118.xls.ms_office1
Radio
8/7/2013
24033267
162734118.xls.ms_office1
Radio
8/7/2013
24043267
162734118.xls.ms_office1
Radio
8/7/2013
24053267
162734118.xls.ms_office1
Radio
8/7/2013
24063267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
Radio
8/7/2013
24073267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
Radio
8/7/2013
24083267
162734118.xls.ms_office1
Radio
8/7/2013
24093267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
Radio
8/7/2013
24103267
162734118.xls.ms_office1
Radio
8/7/2013
24113267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
24123267
162734118.xls.ms_office1
Radio
8/7/2013
24133267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
24143267
162734118.xls.ms_office1
Radio
8/7/2013
24153267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
24163267
162734118.xls.ms_office1
Radio
8/7/2013
24173267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
24183267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
24193267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
8/7/2013
24203267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
24213267
162734118.xls.ms_office1
Radio
8/7/2013
24223267
162734118.xls.ms_office1
Radio
8/7/2013
24233267
162734118.xls.ms_office1
Radio
8/7/2013
24243267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
24253267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
24263267
162734118.xls.ms_office1
Radio
8/7/2013
24273267
162734118.xls.ms_office1
Radio
8/7/2013
24283267
162734118.xls.ms_office1
Radio
8/7/2013
24293267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
24303267
162734118.xls.ms_office1
Transport
Radio
RAN11.0
Equipment
8/7/2013
24313267
162734118.xls.ms_office1
Transport
Radio
RAN11.0
8/7/2013
24323267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Transport
RAN11.0
Radio
RAN11.0
8/7/2013
24333267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
24343267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
Equipment
RAN11.0
8/7/2013
24353267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
24363267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
24373267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
8/7/2013
24383267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
24393267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
24403267
162734118.xls.ms_office1
Transport
8/7/2013
24413267
162734118.xls.ms_office1
Transport
8/7/2013
24423267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
24433267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
24443267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Transport
8/7/2013
24453267
162734118.xls.ms_office1
Radio
Transport
RAN11.0
Equipment
RAN11.0
Equipment
Transport
8/7/2013
24463267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
24473267
162734118.xls.ms_office1
Transport
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
24483267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
24493267
162734118.xls.ms_office1
Transport
Radio
Radio
Radio
8/7/2013
24503267
162734118.xls.ms_office1
Radio
Radio
Equipment
Radio
8/7/2013
24513267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
24523267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
24533267
162734118.xls.ms_office1
Transport
Radio
Radio
8/7/2013
24543267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Radio
8/7/2013
24553267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
24563267
162734118.xls.ms_office1
Equipment
Radio
RAN11.0
8/7/2013
24573267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
24583267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
24593267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
24603267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
24613267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
24623267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
24633267
162734118.xls.ms_office1
Radio
8/7/2013
24643267
162734118.xls.ms_office1
Radio
8/7/2013
24653267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
24663267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
24673267
162734118.xls.ms_office1
Radio
8/7/2013
24683267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
24693267
162734118.xls.ms_office1
Transport
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
24703267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
24713267
162734118.xls.ms_office1
Radio
RAN11.0
Equipment
8/7/2013
24723267
162734118.xls.ms_office1
Radio
Transport
RAN11.0
Radio
8/7/2013
24733267
162734118.xls.ms_office1
Equipment
Equipment
Radio
Radio
Radio
8/7/2013
24743267
162734118.xls.ms_office1
Radio
Transport
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
24753267
162734118.xls.ms_office1
Transport
RAN11.0
Radio
Transport
8/7/2013
24763267
162734118.xls.ms_office1
Transport
Equipment
Radio
8/7/2013
24773267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
24783267
162734118.xls.ms_office1
Radio
Equipment
8/7/2013
24793267
162734118.xls.ms_office1
Equipment
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
8/7/2013
24803267
162734118.xls.ms_office1
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
8/7/2013
24813267
162734118.xls.ms_office1
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Radio
8/7/2013
24823267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
RAN11.0
8/7/2013
24833267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
Radio
8/7/2013
24843267
162734118.xls.ms_office1
Transport
Radio
8/7/2013
24853267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
24863267
162734118.xls.ms_office1
Transport
Radio
Radio
RAN11.0
Radio
RAN11.0
Radio
8/7/2013
24873267
162734118.xls.ms_office1
Radio
Radio
Transport
8/7/2013
24883267
162734118.xls.ms_office1
Equipment
Equipment
Radio
8/7/2013
24893267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
24903267
162734118.xls.ms_office1
Radio
Transport
RAN11.0
Transport
8/7/2013
24913267
162734118.xls.ms_office1
Equipment
Equipment
Radio
8/7/2013
24923267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
Transport
Transport
8/7/2013
24933267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
24943267
162734118.xls.ms_office1
Transport
RAN11.0
Equipment
8/7/2013
24953267
162734118.xls.ms_office1
Equipment
8/7/2013
24963267
162734118.xls.ms_office1
Equipment
8/7/2013
24973267
162734118.xls.ms_office1
Equipment
8/7/2013
24983267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
24993267
162734118.xls.ms_office1
Transport
8/7/2013
25003267
162734118.xls.ms_office1
Transport
8/7/2013
25013267
162734118.xls.ms_office1
Transport
8/7/2013
25023267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25033267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
25043267
162734118.xls.ms_office1
Transport
8/7/2013
25053267
162734118.xls.ms_office1
Transport
8/7/2013
25063267
162734118.xls.ms_office1
Transport
8/7/2013
25073267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
25083267
162734118.xls.ms_office1
Transport
8/7/2013
25093267
162734118.xls.ms_office1
Transport
8/7/2013
25103267
162734118.xls.ms_office1
Transport
Radio
Radio
8/7/2013
25113267
162734118.xls.ms_office1
Transport
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
8/7/2013
25123267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
25133267
162734118.xls.ms_office1
Radio
8/7/2013
25143267
162734118.xls.ms_office1
Radio
8/7/2013
25153267
162734118.xls.ms_office1
Radio
Equipment
Transport
Transport
8/7/2013
25163267
162734118.xls.ms_office1
Radio
Radio
Radio
RAN11.0
8/7/2013
25173267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
25183267
162734118.xls.ms_office1
Radio
Transport
Transport
Radio
RAN11.0
8/7/2013
25193267
162734118.xls.ms_office1
Radio
Transport
RAN11.0
8/7/2013
25203267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
25213267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
25223267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25233267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
25243267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
25253267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
25263267
162734118.xls.ms_office1
Transport
8/7/2013
25273267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25283267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25293267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25303267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25313267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
25323267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
25333267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
25343267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
25353267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25363267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
25373267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
25383267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25393267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
25403267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
25413267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25423267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25433267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
8/7/2013
25443267
162734118.xls.ms_office1
Radio
Radio
Transport
8/7/2013
25453267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
Radio
Radio
8/7/2013
25463267
162734118.xls.ms_office1
Radio
8/7/2013
25473267
162734118.xls.ms_office1
Radio
8/7/2013
25483267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
25493267
162734118.xls.ms_office1
Radio
Transport
Radio
RAN11.0
8/7/2013
25503267
162734118.xls.ms_office1
Radio
8/7/2013
25513267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
25523267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Radio
Radio
8/7/2013
25533267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
Equipment
8/7/2013
25543267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
25553267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
25563267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
25573267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
25583267
162734118.xls.ms_office1
Radio
Radio
Equipment
8/7/2013
25593267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
25603267
162734118.xls.ms_office1
Radio
8/7/2013
25613267
162734118.xls.ms_office1
Radio
8/7/2013
25623267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
25633267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
25643267
162734118.xls.ms_office1
Radio
8/7/2013
25653267
162734118.xls.ms_office1
Radio
8/7/2013
25663267
162734118.xls.ms_office1
Radio
8/7/2013
25673267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
25683267
162734118.xls.ms_office1
Equipment
Radio
Radio
RAN11.0
8/7/2013
25693267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
25703267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
25713267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
25723267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
25733267
162734118.xls.ms_office1
Radio
8/7/2013
25743267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
25753267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
Radio
8/7/2013
25763267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
Equipment
Radio
RAN11.0
8/7/2013
25773267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
25783267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
25793267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
25803267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25813267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
25823267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
25833267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
25843267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25853267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25863267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25873267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25883267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25893267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25903267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
25913267
162734118.xls.ms_office1
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
25923267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
25933267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
25943267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25953267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
25963267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
25973267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
25983267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
25993267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
26003267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
26013267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
26023267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
26033267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
Transport
8/7/2013
26043267
162734118.xls.ms_office1
Radio
8/7/2013
26053267
162734118.xls.ms_office1
Radio
8/7/2013
26063267
162734118.xls.ms_office1
Radio
8/7/2013
26073267
162734118.xls.ms_office1
Radio
8/7/2013
26083267
162734118.xls.ms_office1
Radio
8/7/2013
26093267
162734118.xls.ms_office1
Radio
8/7/2013
26103267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
26113267
162734118.xls.ms_office1
Radio
8/7/2013
26123267
162734118.xls.ms_office1
Radio
8/7/2013
26133267
162734118.xls.ms_office1
Radio
8/7/2013
26143267
162734118.xls.ms_office1
Radio
8/7/2013
26153267
162734118.xls.ms_office1
Radio
8/7/2013
26163267
162734118.xls.ms_office1
Radio
Transport
Transport
8/7/2013
26173267
162734118.xls.ms_office1
Transport
Equipment
Radio
8/7/2013
26183267
162734118.xls.ms_office1
Radio
8/7/2013
26193267
162734118.xls.ms_office1
Radio
8/7/2013
26203267
162734118.xls.ms_office1
Radio
8/7/2013
26213267
162734118.xls.ms_office1
Radio
8/7/2013
26223267
162734118.xls.ms_office1
Radio
8/7/2013
26233267
162734118.xls.ms_office1
Radio
8/7/2013
26243267
162734118.xls.ms_office1
Radio
8/7/2013
26253267
162734118.xls.ms_office1
Radio
Transport
8/7/2013
26263267
162734118.xls.ms_office1
Radio
Equipment
8/7/2013
26273267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
26283267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
26293267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
26303267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
Radio
Radio
8/7/2013
26313267
162734118.xls.ms_office1
Radio
Equipment
Equipment
8/7/2013
26323267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
26333267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Equipment
RAN11.0
8/7/2013
26343267
162734118.xls.ms_office1
Equipment
Transport
Radio
8/7/2013
26353267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
26363267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
26373267
162734118.xls.ms_office1
Radio
8/7/2013
26383267
162734118.xls.ms_office1
Radio
8/7/2013
26393267
162734118.xls.ms_office1
Radio
8/7/2013
26403267
162734118.xls.ms_office1
Radio
8/7/2013
26413267
162734118.xls.ms_office1
Radio
8/7/2013
26423267
162734118.xls.ms_office1
Radio
8/7/2013
26433267
162734118.xls.ms_office1
Radio
8/7/2013
26443267
162734118.xls.ms_office1
Radio
8/7/2013
26453267
162734118.xls.ms_office1
Radio
8/7/2013
26463267
162734118.xls.ms_office1
Radio
8/7/2013
26473267
162734118.xls.ms_office1
Radio
8/7/2013
26483267
162734118.xls.ms_office1
Radio
8/7/2013
26493267
162734118.xls.ms_office1
Radio
8/7/2013
26503267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
26513267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
26523267
162734118.xls.ms_office1
Radio
8/7/2013
26533267
162734118.xls.ms_office1
Radio
8/7/2013
26543267
162734118.xls.ms_office1
Radio
8/7/2013
26553267
162734118.xls.ms_office1
Radio
8/7/2013
26563267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
26573267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
26583267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
26593267
162734118.xls.ms_office1
Radio
8/7/2013
26603267
162734118.xls.ms_office1
Radio
8/7/2013
26613267
162734118.xls.ms_office1
Radio
8/7/2013
26623267
162734118.xls.ms_office1
Radio
8/7/2013
26633267
162734118.xls.ms_office1
Radio
8/7/2013
26643267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
26653267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
26663267
162734118.xls.ms_office1
Radio
8/7/2013
26673267
162734118.xls.ms_office1
Radio
8/7/2013
26683267
162734118.xls.ms_office1
Radio
8/7/2013
26693267
162734118.xls.ms_office1
Radio
8/7/2013
26703267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
26713267
162734118.xls.ms_office1
Radio
8/7/2013
26723267
162734118.xls.ms_office1
Radio
8/7/2013
26733267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
26743267
162734118.xls.ms_office1
Radio
8/7/2013
26753267
162734118.xls.ms_office1
Radio
8/7/2013
26763267
162734118.xls.ms_office1
Radio
8/7/2013
26773267
162734118.xls.ms_office1
Radio
8/7/2013
26783267
162734118.xls.ms_office1
Radio
8/7/2013
26793267
162734118.xls.ms_office1
Radio
8/7/2013
26803267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
26813267
162734118.xls.ms_office1
Radio
Transport
8/7/2013
26823267
162734118.xls.ms_office1
Radio
8/7/2013
26833267
162734118.xls.ms_office1
Radio
8/7/2013
26843267
162734118.xls.ms_office1
Radio
8/7/2013
26853267
162734118.xls.ms_office1
Radio
8/7/2013
26863267
162734118.xls.ms_office1
Radio
8/7/2013
26873267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
26883267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
26893267
162734118.xls.ms_office1
Radio
8/7/2013
26903267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
26913267
162734118.xls.ms_office1
Radio
8/7/2013
26923267
162734118.xls.ms_office1
Radio
8/7/2013
26933267
162734118.xls.ms_office1
Radio
Equipment
8/7/2013
26943267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
26953267
162734118.xls.ms_office1
Equipment
RAN11.0
Transport
8/7/2013
26963267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
26973267
162734118.xls.ms_office1
Transport
8/7/2013
26983267
162734118.xls.ms_office1
Transport
Equipment
8/7/2013
26993267
162734118.xls.ms_office1
Equipment
Transport
8/7/2013
27003267
162734118.xls.ms_office1
Transport
RAN11.0
Radio
8/7/2013
27013267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
27023267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
27033267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
27043267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
27053267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
27063267
162734118.xls.ms_office1
Transport
Transport
Radio
Equipment
Transport
8/7/2013
27073267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
27083267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
Radio
Radio
Radio
8/7/2013
27093267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
Radio
8/7/2013
27103267
162734118.xls.ms_office1
Radio
Transport
8/7/2013
27113267
162734118.xls.ms_office1
Transport
Transport
Transport
Transport
8/7/2013
27123267
162734118.xls.ms_office1
Transport
Transport
Transport
8/7/2013
27133267
162734118.xls.ms_office1
Transport
Transport
Transport
8/7/2013
27143267
162734118.xls.ms_office1
Transport
Transport
Transport
Transport
RAN11.0
Radio
8/7/2013
27153267
162734118.xls.ms_office1
Radio
Radio
Equipment
8/7/2013
27163267
162734118.xls.ms_office1
Equipment
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
27173267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Transport
Radio
RAN11.0
8/7/2013
27183267
162734118.xls.ms_office1
Radio
8/7/2013
27193267
162734118.xls.ms_office1
Radio
8/7/2013
27203267
162734118.xls.ms_office1
Radio
8/7/2013
27213267
162734118.xls.ms_office1
Radio
8/7/2013
27223267
162734118.xls.ms_office1
Radio
8/7/2013
27233267
162734118.xls.ms_office1
Radio
8/7/2013
27243267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
27253267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
27263267
162734118.xls.ms_office1
Radio
8/7/2013
27273267
162734118.xls.ms_office1
Radio
8/7/2013
27283267
162734118.xls.ms_office1
Radio
8/7/2013
27293267
162734118.xls.ms_office1
Radio
8/7/2013
27303267
162734118.xls.ms_office1
Radio
8/7/2013
27313267
162734118.xls.ms_office1
Radio
Transport
8/7/2013
27323267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Transport
Transport
8/7/2013
27333267
162734118.xls.ms_office1
Equipment
RAN11.0
Transport
RAN11.0
Transport
8/7/2013
27343267
162734118.xls.ms_office1
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
8/7/2013
27353267
162734118.xls.ms_office1
Transport
Radio
8/7/2013
27363267
162734118.xls.ms_office1
Radio
Equipment
RAN11.0
8/7/2013
27373267
162734118.xls.ms_office1
Transport
8/7/2013
27383267
162734118.xls.ms_office1
Equipment
Transport
8/7/2013
27393267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
27403267
162734118.xls.ms_office1
Transport
Transport
Transport
RAN11.0
8/7/2013
27413267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Radio
Transport
RAN11.0
8/7/2013
27423267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Equipment
Transport
8/7/2013
27433267
162734118.xls.ms_office1
Transport
Transport
Equipment
Equipment
RAN11.0
8/7/2013
27443267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
27453267
162734118.xls.ms_office1
Equipment
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
27463267
162734118.xls.ms_office1
Equipment
Transport
Equipment
Transport
8/7/2013
27473267
162734118.xls.ms_office1
Equipment
Equipment
Transport
Transport
8/7/2013
27483267
162734118.xls.ms_office1
Transport
Transport
Radio
Radio
RAN11.0
8/7/2013
27493267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
Transport
RAN11.0
8/7/2013
27503267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
Radio
8/7/2013
27513267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
27523267
162734118.xls.ms_office1
Radio
Radio
Equipment
Equipment
RAN11.0
8/7/2013
27533267
162734118.xls.ms_office1
Transport
Radio
8/7/2013
27543267
162734118.xls.ms_office1
Radio
Radio
Transport
RAN11.0
8/7/2013
27553267
162734118.xls.ms_office1
Equipment
Equipment
Transport
8/7/2013
27563267
162734118.xls.ms_office1
Radio
Radio
Radio
RAN11.0
8/7/2013
27573267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
27583267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
Radio
8/7/2013
27593267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
27603267
162734118.xls.ms_office1
Radio
Transport
RAN11.0
8/7/2013
27613267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
Transport
8/7/2013
27623267
162734118.xls.ms_office1
Radio
Transport
Radio
8/7/2013
27633267
162734118.xls.ms_office1
Transport
RAN11.0
Radio
8/7/2013
27643267
162734118.xls.ms_office1
Equipment
Radio
Radio
8/7/2013
27653267
162734118.xls.ms_office1
Radio
8/7/2013
27663267
162734118.xls.ms_office1
Radio
8/7/2013
27673267
162734118.xls.ms_office1
Radio
8/7/2013
27683267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
27693267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
27703267
162734118.xls.ms_office1
Transport
RAN11.0
Radio
RAN11.0
Transport
RAN11.0
Radio
8/7/2013
27713267
162734118.xls.ms_office1
Radio
8/7/2013
27723267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
8/7/2013
27733267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
27743267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
Equipment
8/7/2013
27753267
162734118.xls.ms_office1
Radio
Transport
8/7/2013
27763267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
27773267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
Transport
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
27783267
162734118.xls.ms_office1
Radio
Transport
RAN11.0
Transport
8/7/2013
27793267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
Radio
Radio
8/7/2013
27803267
162734118.xls.ms_office1
Radio
Transport
RAN11.0
Radio
RAN11.0
Radio
8/7/2013
27813267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
27823267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
27833267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
27843267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
27853267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
Radio
8/7/2013
27863267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Radio
8/7/2013
27873267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
27883267
162734118.xls.ms_office1
Radio
Radio
Equipment
8/7/2013
27893267
162734118.xls.ms_office1
Transport
Equipment
Transport
8/7/2013
27903267
162734118.xls.ms_office1
Transport
Transport
Transport
8/7/2013
27913267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
27923267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
27933267
162734118.xls.ms_office1
Transport
Transport
Equipment
RAN11.0
8/7/2013
27943267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
27953267
162734118.xls.ms_office1
Equipment
Equipment
8/7/2013
27963267
162734118.xls.ms_office1
Transport
8/7/2013
27973267
162734118.xls.ms_office1
Radio
8/7/2013
27983267
162734118.xls.ms_office1
Radio
8/7/2013
27993267
162734118.xls.ms_office1
Radio
8/7/2013
28003267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
28013267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
28023267
162734118.xls.ms_office1
Radio
Equipment
RAN11.0
8/7/2013
28033267
162734118.xls.ms_office1
Equipment
RAN11.0
Transport
Transport
RAN11.0
8/7/2013
28043267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
Radio
Radio
Radio
Radio
8/7/2013
28053267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
RAN11.0
8/7/2013
28063267
162734118.xls.ms_office1
Transport
RAN11.0
Radio
8/7/2013
28073267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
Transport
8/7/2013
28083267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
28093267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
8/7/2013
28103267
162734118.xls.ms_office1
Transport
Equipment
Equipment
8/7/2013
28113267
162734118.xls.ms_office1
Radio
8/7/2013
28123267
162734118.xls.ms_office1
Radio
8/7/2013
28133267
162734118.xls.ms_office1
Radio
8/7/2013
28143267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
28153267
162734118.xls.ms_office1
Radio
8/7/2013
28163267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
28173267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
Radio
Radio
Radio
8/7/2013
28183267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
Radio
8/7/2013
28193267
162734118.xls.ms_office1
Radio
Radio
Transport
8/7/2013
28203267
162734118.xls.ms_office1
Equipment
RAN11.0
Transport
RAN11.0
8/7/2013
28213267
162734118.xls.ms_office1
Radio
Transport
8/7/2013
28223267
162734118.xls.ms_office1
Radio
8/7/2013
28233267
162734118.xls.ms_office1
Radio
8/7/2013
28243267
162734118.xls.ms_office1
Equipment
Equipment
RAN11.0
Radio
8/7/2013
28253267
162734118.xls.ms_office1
Radio
Equipment
RAN11.0
Equipment
RAN11.0
8/7/2013
28263267
162734118.xls.ms_office1
Radio
8/7/2013
28273267
162734118.xls.ms_office1
Equipment
RAN11.0
8/7/2013
28283267
162734118.xls.ms_office1
Equipment
Equipment
RAN11.0
Equipment
RAN11.0
8/7/2013
28293267
162734118.xls.ms_office1
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Radio
Radio
Radio
8/7/2013
28303267
162734118.xls.ms_office1
Transport
Radio
Radio
8/7/2013
28313267
162734118.xls.ms_office1
Radio
8/7/2013
28323267
162734118.xls.ms_office1
Radio
8/7/2013
28333267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
28343267
162734118.xls.ms_office1
Radio
8/7/2013
28353267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
28363267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
RAN11.0
8/7/2013
28373267
162734118.xls.ms_office1
Transport
RAN11.0
Radio
8/7/2013
28383267
162734118.xls.ms_office1
Equipment
8/7/2013
28393267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
RAN11.0
8/7/2013
28403267
162734118.xls.ms_office1
Transport
Transport
Radio
8/7/2013
28413267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
28423267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
28433267
162734118.xls.ms_office1
Radio
8/7/2013
28443267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
28453267
162734118.xls.ms_office1
Transport
Radio
Transport
Equipment
8/7/2013
28463267
162734118.xls.ms_office1
Equipment
Radio
Radio
8/7/2013
28473267
162734118.xls.ms_office1
Radio
Transport
Transport
8/7/2013
28483267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
28493267
162734118.xls.ms_office1
Transport
Equipment
8/7/2013
28503267
162734118.xls.ms_office1
Radio
8/7/2013
28513267
162734118.xls.ms_office1
Radio
8/7/2013
28523267
162734118.xls.ms_office1
Radio
8/7/2013
28533267
162734118.xls.ms_office1
Transport
8/7/2013
28543267
162734118.xls.ms_office1
Radio
Transport
Equipment
RAN11.0
Equipment
RAN11.0
8/7/2013
28553267
162734118.xls.ms_office1
Radio
Transport
Transport
Transport
Transport
RAN11.0
8/7/2013
28563267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
8/7/2013
28573267
162734118.xls.ms_office1
Equipment
Radio
8/7/2013
28583267
162734118.xls.ms_office1
Equipment
Radio
Transport
Radio
RAN11.0
8/7/2013
28593267
162734118.xls.ms_office1
Transport
Radio
RAN11.0
Radio
8/7/2013
28603267
162734118.xls.ms_office1
Radio
8/7/2013
28613267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
28623267
162734118.xls.ms_office1
Radio
Transport
8/7/2013
28633267
162734118.xls.ms_office1
Radio
8/7/2013
28643267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
28653267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
28663267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
28673267
162734118.xls.ms_office1
Radio
Transport
Transport
RAN11.0
8/7/2013
28683267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
28693267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
8/7/2013
28703267
162734118.xls.ms_office1
Radio
Transport
RAN11.0
Transport
Transport
Transport
RAN11.0
8/7/2013
28713267
162734118.xls.ms_office1
Transport
Transport
Radio
Radio
8/7/2013
28723267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Transport
8/7/2013
28733267
162734118.xls.ms_office1
Equipment
Equipment
Transport
Transport
8/7/2013
28743267
162734118.xls.ms_office1
Transport
Transport
Equipment
Equipment
Equipment
8/7/2013
28753267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
Equipment
8/7/2013
28763267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
8/7/2013
28773267
162734118.xls.ms_office1
Radio
8/7/2013
28783267
162734118.xls.ms_office1
Radio
8/7/2013
28793267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
Transport
Transport
8/7/2013
28803267
162734118.xls.ms_office1
Transport
Radio
Radio
8/7/2013
28813267
162734118.xls.ms_office1
Radio
8/7/2013
28823267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
28833267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
28843267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
28853267
162734118.xls.ms_office1
Radio
8/7/2013
28863267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
28873267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
28883267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
28893267
162734118.xls.ms_office1
Radio
Transport
8/7/2013
28903267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
28913267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
28923267
162734118.xls.ms_office1
Radio
Equipment
Radio
RAN11.0
8/7/2013
28933267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
28943267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
8/7/2013
28953267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
28963267
162734118.xls.ms_office1
Transport
RAN11.0
Radio
8/7/2013
28973267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
28983267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
28993267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
29003267
162734118.xls.ms_office1
Transport
RAN11.0
Radio
Transport
RAN11.0
8/7/2013
29013267
162734118.xls.ms_office1
Transport
RAN11.0
Radio
8/7/2013
29023267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
29033267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
29043267
162734118.xls.ms_office1
Radio
Equipment
8/7/2013
29053267
162734118.xls.ms_office1
Equipment
Transport
RAN11.0
8/7/2013
29063267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
29073267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
29083267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
29093267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
29103267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
29113267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
29123267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
29133267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Equipment
8/7/2013
29143267
162734118.xls.ms_office1
Equipment
Radio
8/7/2013
29153267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
29163267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
29173267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
29183267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
29193267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
29203267
162734118.xls.ms_office1
Transport
8/7/2013
29213267
162734118.xls.ms_office1
Radio
Equipment
Equipment
RAN11.0
8/7/2013
29223267
162734118.xls.ms_office1
Transport
8/7/2013
29233267
162734118.xls.ms_office1
Transport
8/7/2013
29243267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
29253267
162734118.xls.ms_office1
Radio
Transport
Radio
RAN11.0
8/7/2013
29263267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
29273267
162734118.xls.ms_office1
Radio
Transport
8/7/2013
29283267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
29293267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
29303267
162734118.xls.ms_office1
Transport
8/7/2013
29313267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
29323267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
29333267
162734118.xls.ms_office1
Radio
8/7/2013
29343267
162734118.xls.ms_office1
Radio
8/7/2013
29353267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
29363267
162734118.xls.ms_office1
Radio
8/7/2013
29373267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
29383267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
29393267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
29403267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
29413267
162734118.xls.ms_office1
Radio
8/7/2013
29423267
162734118.xls.ms_office1
Equipment
Radio
8/7/2013
29433267
162734118.xls.ms_office1
Radio
Equipment
8/7/2013
29443267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
29453267
162734118.xls.ms_office1
Radio
8/7/2013
29463267
162734118.xls.ms_office1
Radio
Equipment
8/7/2013
29473267
162734118.xls.ms_office1
Equipment
Radio
8/7/2013
29483267
162734118.xls.ms_office1
Radio
8/7/2013
29493267
162734118.xls.ms_office1
Radio
Transport
RAN11.0
8/7/2013
29503267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
29513267
162734118.xls.ms_office1
Transport
RAN11.0
Equipment
8/7/2013
29523267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
29533267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
29543267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
29553267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
29563267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
29573267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
29583267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
29593267
162734118.xls.ms_office1
Equipment
8/7/2013
29603267
162734118.xls.ms_office1
Equipment
Equipment
Equipment
Radio
RAN11.0
8/7/2013
29613267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
Radio
Radio
8/7/2013
29623267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
Radio
Radio
Radio
8/7/2013
29633267
162734118.xls.ms_office1
Transport
Radio
8/7/2013
29643267
162734118.xls.ms_office1
Transport
Transport
Radio
Radio
8/7/2013
29653267
162734118.xls.ms_office1
Radio
8/7/2013
29663267
162734118.xls.ms_office1
Radio
8/7/2013
29673267
162734118.xls.ms_office1
Radio
8/7/2013
29683267
162734118.xls.ms_office1
Radio
8/7/2013
29693267
162734118.xls.ms_office1
Radio
8/7/2013
29703267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
29713267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
Transport
RAN11.0
Radio
RAN11.0
8/7/2013
29723267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
29733267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
29743267
162734118.xls.ms_office1
Radio
8/7/2013
29753267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
8/7/2013
29763267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
Equipment
Radio
RAN11.0
8/7/2013
29773267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
Transport
RAN11.0
8/7/2013
29783267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
29793267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
Radio
Radio
8/7/2013
29803267
162734118.xls.ms_office1
Radio
Radio
Radio
Transport
RAN11.0
Transport
8/7/2013
29813267
162734118.xls.ms_office1
Transport
Equipment
RAN11.0
Transport
RAN11.0
Equipment
8/7/2013
29823267
162734118.xls.ms_office1
Transport
Radio
Transport
Equipment
Radio
8/7/2013
29833267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
29843267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
29853267
162734118.xls.ms_office1
Radio
8/7/2013
29863267
162734118.xls.ms_office1
Radio
RAN11.0
Equipment
RAN11.0
Radio
8/7/2013
29873267
162734118.xls.ms_office1
Equipment
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
29883267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
Equipment
RAN11.0
Radio
RAN11.0
8/7/2013
29893267
162734118.xls.ms_office1
Radio
RAN11.0
Equipment
RAN11.0
Radio
RAN11.0
Equipment
RAN11.0
Radio
RAN11.0
Equipment
RAN11.0
8/7/2013
29903267
162734118.xls.ms_office1
Radio
RAN11.0
Equipment
RAN11.0
Radio
RAN11.0
Equipment
RAN11.0
Radio
RAN11.0
Equipment
RAN11.0
Radio
RAN11.0
8/7/2013
29913267
162734118.xls.ms_office1
Equipment
RAN11.0
Transport
Transport
Equipment
8/7/2013
29923267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
29933267
162734118.xls.ms_office1
Radio
8/7/2013
29943267
162734118.xls.ms_office1
Equipment
Equipment
Equipment
8/7/2013
29953267
162734118.xls.ms_office1
Radio
8/7/2013
29963267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
29973267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
29983267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
29993267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
30003267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
30013267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
30023267
162734118.xls.ms_office1
Transport
Transport
Transport
8/7/2013
30033267
162734118.xls.ms_office1
Transport
Transport
Transport
Transport
RAN11.0
8/7/2013
30043267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
Transport
8/7/2013
30053267
162734118.xls.ms_office1
Transport
8/7/2013
30063267
162734118.xls.ms_office1
Transport
8/7/2013
30073267
162734118.xls.ms_office1
Radio
8/7/2013
30083267
162734118.xls.ms_office1
Radio
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
30093267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
30103267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
Transport
RAN11.0
8/7/2013
30113267
162734118.xls.ms_office1
Radio
Transport
8/7/2013
30123267
162734118.xls.ms_office1
Radio
8/7/2013
30133267
162734118.xls.ms_office1
Transport
Radio
8/7/2013
30143267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
30153267
162734118.xls.ms_office1
Equipment
Transport
RAN11.0
Transport
Radio
8/7/2013
30163267
162734118.xls.ms_office1
Transport
Radio
RAN11.0
Equipment
Transport
Radio
8/7/2013
30173267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
Radio
8/7/2013
30183267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
Equipment
8/7/2013
30193267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
30203267
162734118.xls.ms_office1
Radio
8/7/2013
30213267
162734118.xls.ms_office1
Radio
8/7/2013
30223267
162734118.xls.ms_office1
Radio
8/7/2013
30233267
162734118.xls.ms_office1
Radio
8/7/2013
30243267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
30253267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
30263267
162734118.xls.ms_office1
Radio
8/7/2013
30273267
162734118.xls.ms_office1
Transport
Transport
Radio
Transport
8/7/2013
30283267
162734118.xls.ms_office1
Radio
8/7/2013
30293267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
30303267
162734118.xls.ms_office1
Transport
8/7/2013
30313267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
30323267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
30333267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
30343267
162734118.xls.ms_office1
Transport
RAN11.0
Radio
8/7/2013
30353267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
Radio
8/7/2013
30363267
162734118.xls.ms_office1
Radio
Transport
8/7/2013
30373267
162734118.xls.ms_office1
Equipment
Radio
Equipment
RAN11.0
Equipment
8/7/2013
30383267
162734118.xls.ms_office1
Equipment
Equipment
Equipment
Transport
Transport
8/7/2013
30393267
162734118.xls.ms_office1
Equipment
8/7/2013
30403267
162734118.xls.ms_office1
Equipment
Equipment
Equipment
8/7/2013
30413267
162734118.xls.ms_office1
Transport
Equipment
Equipment
8/7/2013
30423267
162734118.xls.ms_office1
Equipment
8/7/2013
30433267
162734118.xls.ms_office1
Equipment
Transport
8/7/2013
30443267
162734118.xls.ms_office1
Transport
Equipment
8/7/2013
30453267
162734118.xls.ms_office1
Equipment
Equipment
Equipment
Equipment
8/7/2013
30463267
162734118.xls.ms_office1
Equipment
Equipment
Equipment
Radio
Radio
8/7/2013
30473267
162734118.xls.ms_office1
Radio
Transport
8/7/2013
30483267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
Radio
8/7/2013
30493267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Radio
8/7/2013
30503267
162734118.xls.ms_office1
Radio
Radio
Transport
RAN11.0
8/7/2013
30513267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
30523267
162734118.xls.ms_office1
Radio
Equipment
8/7/2013
30533267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
30543267
162734118.xls.ms_office1
Transport
RAN11.0
Radio
RAN11.0
8/7/2013
30553267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
8/7/2013
30563267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
Transport
RAN11.0
8/7/2013
30573267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
Equipment
Equipment
8/7/2013
30583267
162734118.xls.ms_office1
Transport
Transport
Equipment
8/7/2013
30593267
162734118.xls.ms_office1
Transport
Transport
Equipment
8/7/2013
30603267
162734118.xls.ms_office1
Equipment
Equipment
Equipment
Equipment
8/7/2013
30613267
162734118.xls.ms_office1
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
8/7/2013
30623267
162734118.xls.ms_office1
Equipment
Equipment
Radio
Radio
8/7/2013
30633267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
30643267
162734118.xls.ms_office1
Radio
8/7/2013
30653267
162734118.xls.ms_office1
Radio
8/7/2013
30663267
162734118.xls.ms_office1
Radio
8/7/2013
30673267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
30683267
162734118.xls.ms_office1
Equipment
Radio
8/7/2013
30693267
162734118.xls.ms_office1
Equipment
Equipment
Radio
8/7/2013
30703267
162734118.xls.ms_office1
Equipment
Equipment
8/7/2013
30713267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
30723267
162734118.xls.ms_office1
Equipment
Equipment
Equipment
8/7/2013
30733267
162734118.xls.ms_office1
Transport
Radio
RAN11.0
8/7/2013
30743267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
Equipment
8/7/2013
30753267
162734118.xls.ms_office1
Equipment
Transport
Transport
Equipment
Radio
8/7/2013
30763267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
30773267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Radio
8/7/2013
30783267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
30793267
162734118.xls.ms_office1
Transport
Equipment
Radio
Radio
Radio
8/7/2013
30803267
162734118.xls.ms_office1
Radio
Radio
Equipment
8/7/2013
30813267
162734118.xls.ms_office1
Equipment
Radio
Radio
8/7/2013
30823267
162734118.xls.ms_office1
Radio
Equipment
RAN11.0
Equipment
Equipment
RAN11.0
Equipment
RAN11.0
8/7/2013
30833267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
Transport
Transport
RAN11.0
8/7/2013
30843267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
30853267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
Equipment
Radio
RAN11.0
8/7/2013
30863267
162734118.xls.ms_office1
Equipment
Equipment
Radio
RAN11.0
Radio
Equipment
Equipment
Radio
RAN11.0
Equipment
8/7/2013
30873267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
30883267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
30893267
162734118.xls.ms_office1
Transport
RAN11.0
Radio
8/7/2013
30903267
162734118.xls.ms_office1
Radio
8/7/2013
30913267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
30923267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
30933267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
30943267
162734118.xls.ms_office1
Radio
8/7/2013
30953267
162734118.xls.ms_office1
Radio
8/7/2013
30963267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
30973267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
RAN11.0
8/7/2013
30983267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
30993267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
31003267
162734118.xls.ms_office1
Radio
8/7/2013
31013267
162734118.xls.ms_office1
Radio
8/7/2013
31023267
162734118.xls.ms_office1
Radio
8/7/2013
31033267
162734118.xls.ms_office1
Radio
8/7/2013
31043267
162734118.xls.ms_office1
Radio
8/7/2013
31053267
162734118.xls.ms_office1
Radio
8/7/2013
31063267
162734118.xls.ms_office1
Radio
8/7/2013
31073267
162734118.xls.ms_office1
Radio
8/7/2013
31083267
162734118.xls.ms_office1
Equipment
Radio
RAN11.0
8/7/2013
31093267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
31103267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
31113267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
31123267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
31133267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
RAN11.0
8/7/2013
31143267
162734118.xls.ms_office1
Radio
Radio
Transport
RAN11.0
Radio
8/7/2013
31153267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
31163267
162734118.xls.ms_office1
Radio
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
8/7/2013
31173267
162734118.xls.ms_office1
Radio
8/7/2013
31183267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
31193267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
31203267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
31213267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
31223267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
31233267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
31243267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
Equipment
Radio
RAN11.0
8/7/2013
31253267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
31263267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
Radio
8/7/2013
31273267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
Radio
Radio
Radio
8/7/2013
31283267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
8/7/2013
31293267
162734118.xls.ms_office1
Radio
Transport
Transport
Radio
8/7/2013
31303267
162734118.xls.ms_office1
Transport
Transport
Radio
RAN11.0
8/7/2013
31313267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
31323267
162734118.xls.ms_office1
Radio
8/7/2013
31333267
162734118.xls.ms_office1
Radio
8/7/2013
31343267
162734118.xls.ms_office1
Radio
8/7/2013
31353267
162734118.xls.ms_office1
Radio
8/7/2013
31363267
162734118.xls.ms_office1
Radio
8/7/2013
31373267
162734118.xls.ms_office1
Radio
8/7/2013
31383267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
31393267
162734118.xls.ms_office1
Radio
Transport
Transport
Transport
8/7/2013
31403267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
Transport
RAN11.0
Transport
8/7/2013
31413267
162734118.xls.ms_office1
Transport
Radio
8/7/2013
31423267
162734118.xls.ms_office1
Equipment
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
31433267
162734118.xls.ms_office1
Radio
Equipment
8/7/2013
31443267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
31453267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
Radio
8/7/2013
31463267
162734118.xls.ms_office1
Radio
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
31473267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
8/7/2013
31483267
162734118.xls.ms_office1
Radio
8/7/2013
31493267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
31503267
162734118.xls.ms_office1
Radio
Transport
Radio
8/7/2013
31513267
162734118.xls.ms_office1
Radio
8/7/2013
31523267
162734118.xls.ms_office1
Radio
8/7/2013
31533267
162734118.xls.ms_office1
Radio
8/7/2013
31543267
162734118.xls.ms_office1
Radio
8/7/2013
31553267
162734118.xls.ms_office1
Radio
8/7/2013
31563267
162734118.xls.ms_office1
Radio
8/7/2013
31573267
162734118.xls.ms_office1
Radio
8/7/2013
31583267
162734118.xls.ms_office1
Radio
8/7/2013
31593267
162734118.xls.ms_office1
Radio
8/7/2013
31603267
162734118.xls.ms_office1
Radio
8/7/2013
31613267
162734118.xls.ms_office1
Radio
8/7/2013
31623267
162734118.xls.ms_office1
Radio
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
31633267
162734118.xls.ms_office1
Radio
Radio
Transport
RAN11.0
8/7/2013
31643267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
31653267
162734118.xls.ms_office1
Transport
8/7/2013
31663267
162734118.xls.ms_office1
Transport
8/7/2013
31673267
162734118.xls.ms_office1
Transport
Transport
Equipment
8/7/2013
31683267
162734118.xls.ms_office1
Radio
Radio
Transport
RAN11.0
Radio
Equipment
8/7/2013
31693267
162734118.xls.ms_office1
Transport
Transport
Transport
Transport
8/7/2013
31703267
162734118.xls.ms_office1
Radio
Transport
RAN11.0
Transport
RAN11.0
Transport
8/7/2013
31713267
162734118.xls.ms_office1
Transport
Radio
8/7/2013
31723267
162734118.xls.ms_office1
Radio
8/7/2013
31733267
162734118.xls.ms_office1
Radio
Transport
Transport
RAN11.0
8/7/2013
31743267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
RAN11.0
Transport
RAN11.0
8/7/2013
31753267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
31763267
162734118.xls.ms_office1
Radio
Transport
Transport
Equipment
RAN11.0
8/7/2013
31773267
162734118.xls.ms_office1
Radio
8/7/2013
31783267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
31793267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
31803267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
31813267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
31823267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
31833267
162734118.xls.ms_office1
Radio
8/7/2013
31843267
162734118.xls.ms_office1
Radio
8/7/2013
31853267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
31863267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
31873267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
31883267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
31893267
162734118.xls.ms_office1
Radio
8/7/2013
31903267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
31913267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
31923267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
31933267
162734118.xls.ms_office1
Radio
8/7/2013
31943267
162734118.xls.ms_office1
Radio
8/7/2013
31953267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
31963267
162734118.xls.ms_office1
Radio
8/7/2013
31973267
162734118.xls.ms_office1
Radio
8/7/2013
31983267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
31993267
162734118.xls.ms_office1
Radio
8/7/2013
32003267
162734118.xls.ms_office1
Radio
8/7/2013
32013267
162734118.xls.ms_office1
Radio
8/7/2013
32023267
162734118.xls.ms_office1
Radio
8/7/2013
32033267
162734118.xls.ms_office1
Radio
8/7/2013
32043267
162734118.xls.ms_office1
Radio
8/7/2013
32053267
162734118.xls.ms_office1
Radio
8/7/2013
32063267
162734118.xls.ms_office1
Radio
8/7/2013
32073267
162734118.xls.ms_office1
Radio
8/7/2013
32083267
162734118.xls.ms_office1
Radio
8/7/2013
32093267
162734118.xls.ms_office1
Radio
8/7/2013
32103267
162734118.xls.ms_office1
Radio
8/7/2013
32113267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
32123267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
8/7/2013
32133267
162734118.xls.ms_office1
Radio
Radio
Radio
RAN11.0
8/7/2013
32143267
162734118.xls.ms_office1
Radio
8/7/2013
32153267
162734118.xls.ms_office1
Radio
8/7/2013
32163267
162734118.xls.ms_office1
Radio
8/7/2013
32173267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
32183267
162734118.xls.ms_office1
Radio
8/7/2013
32193267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
32203267
162734118.xls.ms_office1
Radio
8/7/2013
32213267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
32223267
162734118.xls.ms_office1
Radio
8/7/2013
32233267
162734118.xls.ms_office1
Radio
8/7/2013
32243267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
32253267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
32263267
162734118.xls.ms_office1
Radio
Radio
Radio
Radio
8/7/2013
32273267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
32283267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
32293267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
32303267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
32313267
162734118.xls.ms_office1
Radio
RAN11.0
8/7/2013
32323267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
32333267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
RAN11.0
8/7/2013
32343267
162734118.xls.ms_office1
Radio
RAN11.0
Equipment
Equipment
RAN11.0
8/7/2013
32353267
162734118.xls.ms_office1
Equipment
Equipment
RAN11.0
Equipment
8/7/2013
32363267
162734118.xls.ms_office1
Equipment
RAN11.0
Transport
Radio
Transport
8/7/2013
32373267
162734118.xls.ms_office1
Transport
Transport
Radio
8/7/2013
32383267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
32393267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
32403267
162734118.xls.ms_office1
Radio
Radio
8/7/2013
32413267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
32423267
162734118.xls.ms_office1
Radio
8/7/2013
32433267
162734118.xls.ms_office1
Radio
8/7/2013
32443267
162734118.xls.ms_office1
Radio
8/7/2013
32453267
162734118.xls.ms_office1
Radio
8/7/2013
32463267
162734118.xls.ms_office1
Radio
8/7/2013
32473267
162734118.xls.ms_office1
Radio
8/7/2013
32483267
162734118.xls.ms_office1
Radio
Transport
Radio
RAN11.0
8/7/2013
32493267
162734118.xls.ms_office1
Transport
Transport
Radio
Transport
8/7/2013
32503267
162734118.xls.ms_office1
Radio
Equipment
Equipment
8/7/2013
32513267
162734118.xls.ms_office1
Radio
RAN11.0
Transport
RAN11.0
Transport
Transport
RAN11.0
8/7/2013
32523267
162734118.xls.ms_office1
Transport
Transport
8/7/2013
32533267
162734118.xls.ms_office1
Transport
RAN11.0
Transport
8/7/2013
32543267
162734118.xls.ms_office1
Transport
RAN11.0
8/7/2013
32553267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
32563267
162734118.xls.ms_office1
Transport
Transport
RAN11.0
8/7/2013
32573267
162734118.xls.ms_office1
Transport
RAN11.0
Radio
Radio
8/7/2013
32583267
162734118.xls.ms_office1
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Equipment
RAN11.0
Transport
Transport
RAN11.0
8/7/2013
32593267
162734118.xls.ms_office1
Radio
RAN11.0
Radio
Radio
8/7/2013
32603267
162734118.xls.ms_office1
Radio
Radio
Radio
8/7/2013
32613267
162734118.xls.ms_office1
Radio
Equipment
RAN11.0
8/7/2013
32623267
162734118.xls.ms_office1
Radio
8/7/2013
32633267
162734118.xls.ms_office1
Radio
Transport
Transport
8/7/2013
32643267
162734118.xls.ms_office1
Equipment
RAN11.0
Transport
Transport
8/7/2013
32653267
162734118.xls.ms_office1
Radio
Radio
RAN11.0
8/7/2013
32663267
162734118.xls.ms_office1
Equipment
8/7/2013
32673267