Академический Документы
Профессиональный Документы
Культура Документы
com/vessel Mass Flow Meter MEC supply mass flow meter New tech,High quality,Low price www.equipmentimes.com CBSE: Class VI to X. Learn CBSE Math/Science Syllabus. From Home. Register NOW! LearnNext.com/FreeTrial Flow Meters One Stop Solution in Liquid Flow Measurement. Contact Us Today! flowsolutions.co.in/High-Quality-Products
Consider two points 1 and 2 lie in the ends of fluid prism having a cross-sectional area dA and length L. The difference in elevation between these two points is h as shown in Figure 02 below. The fluid is at rest and its surface is free. The prism is therefore in equilibrium and all forces acting on it sums up to zero.
Note: FFS stands for Free Fluid Surface which refers to fluid surface subject to zero gauge pressure. The volume of the prism is equal to the length times the base area of the fluid.
The weight of the fluid prism shown is equal to the product of the unit weight and volume.
Therefore, in any homogeneous fluid at rest, the difference in pressure between any two points is equal to the product of the unit weight of the fluid and the difference in elevation of the points. If h = 0 so that points 1 and 2 are on the same horizontal plane, p2 - p1 = 0 or
Therefore, in any homogeneous fluid at rest, the pressures at all points along the same horizontal plane are equal. If point 1 lie on the FFS, the gauge pressure p1 = 0, making p2 - 0 = h or simply
This means that the pressure at any depth h below a continuous free fluid surface at rest is equal to the product of the unit weight of fluid and the depth
h.
Transmission of Pressure
We can write the equation p2 - p1 = h into the form
which means that any change in the pressure at point 1 would cause an equal change of pressure at point 2. In other words, a pressure applied at any point in a liquid at rest is transmitted equally and undiminished to every other point in the liquid.
Pressure Head
The equation p = h may be written into the form
where h or its equivalent p/ is in hydraulics called the pressure head. Pressure head is the height of column of homogeneous fluid of unit weight that will produce an intensity of pressure p. To convert pressure head of liquid A to equivalent pressure head of liquid B
Properties of Water
s = 1.0 = 9.81 kN/m3 (or 62.4 lb/ft3 in English system) = 1000 kg/m3 (or 1.94 slugs/ft3 in English system)
SPONSORED LINKS
Recent Updates
MATHalino.com is now offering tutorials for Engineering Mathematics 026 Review Problem - Find the diameter of a wooden ball 025 Review Problem - Time required to fill a reservoir of water