Вы находитесь на странице: 1из 4

REVISION

May 2000

Process Industry Practices Piping

PIP PN01CJ1S01 Piping Material Specification 1CJ1S01 Class 150, 1-1/4 CR - 1/2 MO, 0.063" C.A. Process

PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice.

This Practice is subject to revision at any time by the responsible Function Team and will be reviewed every 5 years. This Practice will be revised, reaffirmed, or withdrawn. Information on whether this Practice has been revised may be found at http://www.pipdocs.org.

Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3208 Red River Street, Suite 300, Austin, Texas 78705. PIP member companies and subscribers may copy this Practice for their internal use.

PRINTING HISTORY August 1996 February 1999 Issued as PIP PN01CJ1P Revision June 1999 May 2000 Revision Revision

Not printed with State funds

REVISION
May 2000
SERVICE: RATING CLASS: TEMPERATURE LIMIT: NOMINAL CORROSION ALLOWANCE: PRESSURE - TEMPERATURE RATINGS TEMP F -20 to 100 200 TEMP C -29 to 38 93 psig kPag ITEM PIPE 290 2000 NOTES 01 260 1795 NPS 1/2 - 2 3 - 24 NIPPLES Branch Swage (CONC) Swage (ECC) FITTINGS Sockolet Thredolet SW Latrolet SW Elbolet 90 ELL 45 ELL Tee Tee (RED) Plug Coupling Coupling (RED) Cap Reducer (CONC) Reducer (ECC) Weldolet 90 LR ELL 45 LR ELL Tee Cap VALVES Gate Gate Gate Gate Globe Globe Lift Check Dual PLT Check Swing Check FLANGES Socket Weld Socket Weld Blind Blind Weld Neck Weld Neck Pair WN Orifice 03 1/2 - 1-1/2 1/2 - 1-1/2 1/2 - 1-1/2 02 03, 17 1/2 - 1-1/2 1/2 - 2 1/2 - 1-1/2 1/2 - 1-1/2 1/2 - 1-1/2 1/2 - 1-1/2 1/2 - 1-1/2 1/2 - 1-1/2 1/2 - 2 1/2 - 1-1/2 1/2 - 1-1/2 1/2 - 1-1/2 2 - 24 2 - 24 2 - 24 2 - 24 2 - 24 2 - 24 2 - 24 1/2 - 2 1/2 - 2 1/2 - 2 3 - 24 1/2 - 2 3 - 12 1/2 - 2 3 - 24 3 - 24 1/2 - 1-1/2 1/2 - 1-1/2 1/2 - 24 1/2 - 24 2 - 24 2 - 24 2 - 24 Class 3000 Class 3000 Class 3000 Class 3000 Class 3000 Class 3000 Class 3000 Class 3000 Class 3000 Class 3000 Class 3000 Weld Weld Weld Weld SW SW SW SW THRD SW SW SW Weld Weld Weld Weld Weld Weld Weld RF SW T/SW RF SW RF SW RF RF RF RF RF RF RF RF XS XS XS Process 150, ASME B16.5a-1998 -20F to 1000F 0.063 in. (0.05 in. MIN)

PIP PN01CJ1S01 Piping Material Specification Line Class 1CJ1S01


MATERIAL: DESIGN CODE: STRESS RELIEF: EXAMINATION: 1-1/4 CR - 1/2 MO ASME B31.3-1999 None Required Per ASME B31.3

300 149 230 1585

400 204 200 1380 ENDS

500 260 170 1170

600 316 140 965 DESCRIPTION

700 371 110 760

800 427 80 550

900 482 50 345

1000 538 20 140

For NPS 1/2 through NPS 24 (Full flange ratings per ASME B16.5, Table 2-1.9.)

SCH/RAT XS STD

1-1/4 CR - 1/2 MO, SMLS, ASTM A335-P11 (Ej=1.00) 1-1/4 CR - 1/2 MO, SMLS, ASTM A335-P11 (Ej=1.00) 1-1/4 CR - 1/2 MO, SMLS, ASTM A335-P11 (Ej=1.00) 1-1/4 CR - 1/2 MO, ASTM A234-WP11 CL1-S, MSS SP-95 1-1/4 CR - 1/2 MO, ASTM A234-WP11 CL1-S, MSS SP-95 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, MSS SP-97 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, MSS SP-97 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.11 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.11 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.11 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.11 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, round head, ASME B16.11 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.11 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.11 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.11 1-1/4 CR - 1/2 MO, ASTM A234-WP11 CL1-S ASME B16.9 1-1/4 CR - 1/2 MO, ASTM A234-WP11 CL1-S, ASME B16.9 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, MSS SP-97 1-1/4 CR - 1/2 MO, ASTM A234-WP11 CL1-S, ASME B16.9 1-1/4 CR - 1/2 MO, ASTM A234-WP11 CL1-S, ASME B16.9 1-1/4 CR - 1/2 MO, ASTM A234-WP11 CL1-S, ASME B16.9 1-1/4 CR - 1/2 MO, ASTM A234-WP11 CL1-S, ASME B16.9 1-1/4 CR - 1/2 MO body w/ 13 CR trim, HF ST 1-1/4 CR - 1/2 MO body w/ 13 CR trim, HF ST 1-1/4 CR - 1/2 MO body w/ 13 CR trim, HF ST 1-1/4 CR - 1/2 MO body w/ 13 CR trim, HF ST, FP 1-1/4 CR - 1/2 MO body w/ 13 CR trim, HF ST 1-1/4 CR - 1/2 MO body w/ 13 CR trim, HF ST 1-1/4 CR - 1/2 MO body w/ 13 CR trim, HF ST, piston 1-1/4 CR - 1/2 MO body w/ 410 SS disc, HF ST 1-1/4 CR - 1/2 MO body w/ 13 CR trim, HF ST GA01CJ500 GA08CJ300 GA08CJ200 GA01CJ501 GL08CJ300 GL01CJ500 CL08CJ300 CD01CJ700 CS01CJ500

03

03

05

15 06

61 07, 26, 63 62 02 12 12 12

Class 150 Class 800 Class 800 Class 150 Class 800 Class 150 Class 800 Class 150 Class 150 Class 150 Class 300 Class 150 Class 300 Class 150 Class 300 Class 300

1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.5 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.5 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.5 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.5 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.5 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.5 1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.36, SW taps

Process Industry Practices

Page 1 of 2

PIP PN01CJ1S01 Piping Material Specification Line Class 1CJ1S01

REVISION
May 2000

ITEM GASKETS

NOTES

NPS 1/2 - 24 1/2 - 24

SCH/RAT Class 150 Class 300

ENDS

DESCRIPTION Spiral wound type 304 SS w/ flexible graphite filler, ASME B16.20 Spiral wound type 304 SS w/ flexible graphite filler, ASME B16.20 ASTM A193, B16 stud w/ 2 heavy hex nuts ASTM A194, GR 4

BOLTING Stud Bolts

90 BRANCH CONNECTION Legend and Chart


24 20 18 16 14 12 10 8 6 4 3 2 1-1/2 1 3/4 1/2 T P P P P P P P P W W W S S S S 24

T P P P P P P P W W W S S S S 20

T P P P P P P W W W S S S S 18

T P P P P P W W W S S S S 16

T P P P P W W W S S S S 14

T P P P W W W S S S S 12

BRANCH SIZE

T P P W W W S S S S 10

T P T W W W W W W S S S S S S S S 8 6 HEADER SIZE

T W W S S S S 4

T W S S S S 3

T E E E E 2

T E E E 1-1/2

T E E 1

T E 3/4

T 1/2

E P S T W

Reducing Tee Branch Weld w/Reinforcing Pad (Pad thickness equals run pipe thickness. Pad width equals 1/2 branch OD.) Sockolet Tee Weldolet (Note 05)

NOTES: 01 02 03 05 06 07 12 15 17 26 61 62 63

Where pipe schedule is shown under SCH/RAT, it is adequate for the full flange rating. Where Calc is shown, the pressure limit may be lower than flange rating. All butt-welded component thicknesses shall match pipe thickness. Threaded joints are permitted only at outlet of vent and drain valves, at hydrostatic connections, at outlet of instrument take-off valves, and to match equipment. Integrally reinforced branch connections are permitted outside the sizes shown in the branch connection tables. Designer shall check weld thickness of integrally reinforced branch connections to determine if PWHT is required. These valves shall be used only for vent, drain, and instrument connections. These valves have no flanges, but are installed between line flanges with extra length bolts. To be used only to match Class 300 rated flange connections at control valves and special equipment. To be used when mating to flanged nozzles. Threaded outlet branch weld fittings to be used only for hydrostatic text connections. To be used only when indicated on P&ID. Install in horizontal position with cover up. Install in horizontal position with cover up or in vertical position with upward flow. Install in horizontal position with hinge pin vertical or in vertical position with upward flow.

REFERENCES: Process Industry Practices (PIP) PIP PNF0200 - Vents, Drains, and Instrument Connection Details PIP PNSMV013 - Low and Intermediate Alloy Steel Gate Valve Descriptions PIP PNSMV014 - Low and Intermediate Alloy Steel Globe Valve Descriptions PIP PNSMV015 - Low and Intermediate Alloy Steel Check Valve Descriptions

Page 2 of 2

Process Industry Practices

Вам также может понравиться