Вы находитесь на странице: 1из 23

Highlights 2011/2012

www.ifm.com

Shaping automation.
The name ifm electronic stands for a large range of different sensors and systems for automation technology. For more than forty years the family-managed company has been researching, developing and producing with the aim of optimising technical processes. With industry and application know-how, ifm electronic successfully provides system solutions that are both innovative and economical. A range of more than 7,800 articles ensures the flexibility required to meet the customers demands. From an individual sensor to the matching accessories to a complete system solution. The ifm group of companies is present in over 70 countries with more than 4,300 employees and looks after more than 100,000 customers from the various industries. We take being close to the customer very seriously. Service visits in the event of questions or requests, support for installation or set-up have become a standard for us. Your satisfaction drives us on. ifm electronic a reliable partner for implementing your projects.

For every application. The safest bet when the going gets tough. Full-metal inductive and magnetic sensors.
pages 4-5

New level sensor, ignores foam and build up. Hygienic point level sensors.
pages 8-9

IO-Link data storage quick and easy. IO-Link Memory Plug.


pages 12-13

The electronic route card for conveying and production. RFID system with Profibus DP interface.
pages 16-17

Tight and sealed due to the unique profiled sealing ring and vibration protection. M8 connectors.
pages 20-21

Product Highlights for 2011/2012.

The vision sensor for object inspection. Visual assessment of variable features of objects.
pages 6-7

A breath of fresh air in pneumatics. Monitoring of compressed air in robotics and handling.
pages 10-11

The bus at a glance: The fast connection from AS-i to Profinet.


pages 14-15

Current is now orange. Power supplies made by ifm electronic.


pages 18-19

For hygienic and wet areas

For industrial applications

For oils and coolants

For every application. The safest bet when the going gets tough.

Full-metal inductive sensors.


Every application has specific requirements for sensors. Therefore, ifm has developed three series of full-metal inductive sensors which are optimised for the requirements of different environmental conditions. The new non-flush full-metal sensors from ifm stand out thanks to high sensing ranges of 6 to 25 mm not only on steel but also on stainless steel, even with small targets. Further excellent characteristics include an extremely high temperature range up to 100 C, the protection rating IP 69K, a special non-stick coating or a correction factor of K = 0. The connectors of the ecolink series are ideally compatible with the fullmetal inductive sensors and together form a sealed system.

Full-metal sensors, T, R, C and S series

A full-metal sensor of the T series monitors the valve positions in a dairy. Successfully carried out temperature shock tests prove the reliability of the sensors in this industry. Further tests check, among others, ageing and material resistance.

Full-metal sensor of the C series developed for use under extreme influences such as oils, coolants and vibration. The suitability for the application is checked by a tough test program. The sensors are subjected to extreme mechanical shocks and vibrations. Installed in welding applications, the sensor of the R series detects the position of the metal target. Its non-stick coating makes it resistant to weld spatter. Already subjected to the impact test in the development stage, it withstands the harsh conditions of the metalworking industry.

Full-metal inductive and magnetic sensors.


T series:
Completely sealed for hygienic and wet areas the full-metal sensors of the T series have been specially designed for use in the food industry. The ecolink EVT connector forms a sealed system together with the sensor.

Full-metal magnetic sensors


Magnetic sensors from ifm electronic are used for non-contact detection of positions, e.g. of magnets and pigs. The sensors can detect magnets through materials like stainless steel, non-ferrous metal, aluminium, plastic and glass. Due to the GMR technology the magnetic sensors feature very long sensing ranges and high switching frequencies. Therefore, they can be used in particularly demanding applications. The sensors are available in M12 and M18 cylindrical housings with connector.

R series:
Robust and resistant to mechanical stress the full-metal sensors of the R series are designed for the metalworking and automotive industries. The sensing face with a special coating lets weld spatter roll off. Weld slag resistant nuts and cables make ecolink EVW the perfect partner for sensors.

Magnetic sensors in the food industry: Through a stainless steel pipe the sensor detects the magnet in a silicone pig.

C series:
Resistant to oils and coolants the full-metal sensors of the C series are ideal for use in the metalworking industry. The oilresistant ecolink EVC connector ensures a higher operational reliability due to the vibration protection with end stop.

Type

Connector

T series sensing range [mm]

R series sensing range [mm]

C series sensing range [mm]

C series K = 0 sensing range [mm]

Full-metal inductive sensors IE, IF, IG and II 3-wire PNP / NPN

S series:
The standard magnetic sensors for industrial applications. Thanks to the full-metal housing and protection rating IP 67 the sensors can also be used in rough environments.

M8 M8 M12 M18 M30

M8 M12 M12 M12 M12

3 b, 6 nf 5 b, 12 nf 10 b, 25 nf

2 b* 2 b* 4 b* 6 b* 12 b*

2b 2b 3b 5b 10 b

2.5 f 4.5 f

*also available as 2-wire PNP / NPN cable units Type Connector T series, IP 68 / 69K sensing range [mm] S series, IP 65 / 67 sensing range [mm]

Full-metal magnetic sensors MG , MF 3-wire PNP / NPN M12 M18 M12 M12 60 referred to an M4.0 magnet 70 referred to an M4.0 magnet 60 referred to an M4.0 magnet 70 referred to an M4.0 magnet

Further information at www.ifm.com/gb/full-metal-sensor

For industrial applications

Assessment of variable features of objects and scenes.

Check objects for presence, size, position or completeness.


While common vision sensors check parts on the basis of defined contours (like the efector dualis contour sensor O2D) the new O2V vision sensor compares on the basis of variable features. Instead of a defined contour the user determines relative features used by the sensor to assess an object or a scene. Within adjustable tolerances the sensor determines characteristics such as the area of an object (number of pixels), the inner and outer object size of an irregular object geometry, roundness or compactness or the number of available holes. Furthermore, the grey-scale values can also be used for assessment. The O2V vision sensor is reliably used for the full / empty control of transport and production vessels. The photo on the right shows, for example, 100 % empty control of a chocolate mould.

Vision sensor O2V


Object inspection for packaging, production and quality control.

The vision sensor checks the presence of adhesive labels or imprints, such as production or best before date. The sensor also detects colour marks such as mounting points or defect marks applied by machine or by hand.

Dual-sheet detection for automated gripper systems as is frequently used in the automotive industry is just as possible as the counting of sheets or fastening clips. Due to their varying reflections it is difficult to represent them by means of a contour.

The object inspection unit checks the presence or position of weld seams, weld spots or areas which went blue in variably degrees due to the high welding temperature. Even irregularly applied materials such as glues or greases are detected.

The vision sensor for the visual inspection of objects.


Robust:
Compact metal housing with the protection rating IP 67 and a temperature range of -10...60 C for harsh operating conditions.

Assessment features, which can be combined to ensure visual object inspection.

Flexible:
Extensive assessment parameters for a wide range of applications. 32 scenes with up to 24 different objects can be saved in the unit.

outer and inner width and height

size of the object

outer and inner radius

Cross-linked:
Ethernet process interface (TCP/IP, Ethernet IP) for image transmission and connection to the controller.
area in number of pixels

Stand-alone:
Camera, lighting and evaluation in one unit.

position of the object

horizontal and vertical coordinate of the objects centre of gravity

User-friendly:
All parameters can be set conveniently via the menu-guided parameter setting software.
grey-scale value number homogeneity, minimum, mean and maximum grey-scale value objects or holes in the object Operating distance / field of view size [mm] Vision sensor O2V 50 20 x 14 46 x 32 75 28 x 20 61 x 44 15 x 11 100 36 x 26 77 x 56 20 x 14 200 68 x 50 140 x 100 40 x 30 400 130 x 100 270 x 200 80 x 60 1000 shape factors of the object

orientation in degrees

roundness, squareness, compactness

2000 640 x 480 1280 x 960 400 x 300

320 x 240 640 x 480 200 x 150

Further information at www.ifm.com/gb/object-inspection

For hygienic and wet areas

For hygienic areas and viscous media

New level sensor, ignores foam and build up.

The better alternative to the vibration fork.


In the food industry deposits and foam often make reliable limit detection difficult. With the hygienic point level sensor LMT they can be suppressed. Therefore the LMT sensor can reliably provide full or empty signals of tanks and ensure run-dry protection of pumps.

Point level sensor type LMT

Especially hygienic: the surface characteristics of the PEEK tip of the sensor is Ra < 0.8 . Adherence of dirt and residues of media is hardly possible.

Using the default setting the sensor detects certain media but not their deposits or foam. Even for viscous and sticky products the LMT point level sensor provides reliable operation.

Hygienic point level sensor with complementary output.


Convenient:
Default setting at the factory makes adjustment to the medium unnecessary. Easy selection from the media list.

Variable in the process.


The modular adapter concept provides highly flexible installation. The sensor can be integrated in the process via different adapter 1 Welding adapter cylindrical, G 1/2 2 Varivent adapter type F with DN25 and 1" or type N with DN40 (1,5") 3 Vibration fork adapter G 3/4 or G 1 4 LMT point level sensor sensor tip PEEK types such as cylindrical welding adapters, clamp and pipe fittings or Varivent or vibration fork adapters.

Food-grade:
Hygienic design without corners and edges. Maintenance-free sealing concept without dead bands.

Standardised:
Tested and certified. Approvals to 3A, EHEDG and conformities to FDA, EC1935/2004.

Polished:
High-quality housing materials such as stainless steel and PEEK. High protecting rating, no corrosion of the housing due to cleaning.

Sealing concept PEEK to metal.


The flush sealing is achieved without O-ring. The PEEK tip of the sensor is in direct contact with the adapter. This avoids dead bands and contamination. Approvals such as EHEDG and 3A certify the food conformity.

Insensitive:
Suppression of deposits and foam, even for viscous and sticky media.

Easy:
Complementary output, no reversing of the polarity or programming necessary. Direct connection via wired connection cables.

Applications

Process connection

Max. process pressure [bar]

Medium temperature [C]

Protection rating / class

LMT point level sensor 4-wire PNP output function NC/NO complementary G 1/2 hydrous media* oils, fats, bulk materials* -116 085 / 150 (1h) 0100 / 150 (1h) IP 68 / IP 69K, III IP 68 / IP 69K, III

G 1/2

-116

Further information and a *detailed media list at www.ifm.com/gb/lmt

For industrial applications

A breath of fresh air in pneumatics. Monitoring of compressed air in robotics and handling.

Pneumatics under control.


The new pressure sensors of the PQ series precisely measure the pressure in the negative pressure range and overpressure range in pneumatic applications. The compact and light housing provides various application options, in particular in robotics and handling. The piezoresistive silicon measuring cell is insensitive to liquids (e.g. condensed water) and deposits that might occur in the system. Furthermore, it guarantees very good accuracy. Vast setting options and the versatile display allow fast and simple adaptation of the sensor to the application. Despite its many features, the pressure sensor has an unbeatable price considerably below EUR 100.

Pressure sensor type PQ

Flexible installation on a DIN rail, thread or profile.


It can be fixed to a DIN rail using the robust DIN rail clip, which is secured against inadvertent movement. The sensor is screwed to the clip.

The sensor can be fixed to flat surfaces and profiles using the two drill holes on the front.

10

With the new compact pressure sensors.


Compact:
Small dimensions and low weight ideal for applications in robotics and handling.

Resistant:
The silicon-resistive cell measures between -1 and 10 bar.

Clear:
The slanted and electronically rotatable display enables ideal readability from almost all installation positions.

2 programmable switching outputs no/nc or 1 switching output no/nc and diagnosis.

Evident:
The situation-dependent display colour enables an evaluation within a fraction of a second, even if the sensor is moving.

The pressure is always in view.


The slanted display can be conveniently read from the front or from above. Furthermore, it can be electronically rotated by 180 degrees. The display colour is selectable: red or green. For example: in the acceptable range, the measured value is displayed in green, it turns red when a selectable switch point is exceeded. This provides an ideal overview in particular where there are fast movements, for example if the pressure sensor is mounted on a slide or mounting arm.

Easy installation:
Whether free-standing mounting, mounting on a profile, DIN rail mounting or direct fixing to the pipe: secure fit of the PQ is always ensured thanks to the mounting holes and accessories.
Installation with an optional double nipple with 1/8" thread is even easier. Using this nipple, the sensor can be fixed to the pipe or air-ducting plate and aligned at the same time quickly and easily.

Adaptable:
Two programmable switching outputs or one switching output and one diagnostic output provide flexible adaption options.
Output Process connection

Meas. range Permissible Min. bursting pressure rel. pressure overl. pressure [bar] [bar] [bar]

Pressure sensor PQ 2 programmable switching outputs no/nc or 1 switching output no/nc and diagnosis -11 or -110

G 1/8

20

30

Further information at www.ifm.com/gb/pq

11

For hygienic and wet areas

For industrial applications

IO-Link data storage quick and easy.

Easy data storage for IO-Link sensors.


When used in conjunction with IO-Link sensors, the memory plug reads and stores data and parameters. It can be installed outside the critical zone so that the parameters are protected and quickly accessible even when the sensor has been destroyed. Especially for machine operators who have not yet used an IO-Link master this unit is an easy, timesaving and lowcost alternative for data storage. The parameters are automatically exchanged between the memory plug and the IOLink sensor. If the parameters of a sensor are changed, the memory plug detects this and automatically updates itself. Thus, the machine operator has always stored the latest sensor parameters. For servicing, you just have to connect the same type of sensor and the memory plug loads automatically the stored data to the sensor during connection. There is no communication between the sensor and the memory plug during operation of the machine. The sensor signals are linked through without being changed. Thanks to the nonvolatile memory the memory plug can be reconfigured as often as required and is re-usable.

IO-Link Memory Plug

By means of FDT-Container and IO-Link Interface the memory plug can either be written or reset to its factory settings, i.e. the stored parameters are deleted. Further, the memory plug can be set to the Write Protected or Read Write mode.

Sensors with the same parameter setting can be programmed even prior to installation in the plant. By means of copying the data, possible errors of a new parameter setting can be prevented.

12

The IO-Link Memory Plug.

Easy:
Parameter setting of new units in case of a replacement without any further tools, software or menu operation.

Statuses and characteristics of the memory plug:


Without data set (empty) Factory setting, no data set available in the unit. Write Protected mode The Write Protected mode permanently stores the requested data set of the sensor. In the status full it is possible to write the data set from the memory plug to units of the same type.

Efficient:
Error-free copying of a data set to a great number of units of the same type. Automatic check for type consistency.

With data set (full) A valid data set is available in the memory for writing of units of the same type.

Automatically:
Storage of current parameters immediately after power on of the supply voltage or after disconnecting and reconnecting the sensor in the Read Write mode.

Read Write mode A memory plug in the Read Write mode stores the data via IO-Link when the supply voltage has been disconnected and reconnected and sensor data has been changed.

Transparent After successful storage of the data the unfiltered sensor signals are transmitted to the higher-level system.

Safe:
In the Write Protected mode data can be stored only once, afterwards it can be only read.

Convenient:
Recovering data from the memory plug in case of unintended changes of the data set in the IO-Link sensor.

Universal use.
The memory plug is appropriate for different sensors even manufacturer independent. Only prerequisite: the IO-Link interface. The memory plug can be used, amongst others, with the following IO-Link sensors from ifm: Storage capacity [Kbytes] Baud rates [kBaud] Temperature range [C] Protection Flow sensors of the SI5 series Pressure sensors of the PP75, PI2 and PN2 series Temperature sensors of the TN, TR and TP series AS-Interface module AC5225

Evident:
Two brightly shining LEDs to indicate the current status and characteristics.

Tried-and-tested:
Process connection via ecolink M12 connection technology for toolless installation. Vibration protection against loosening in cases of shock or vibration.

Dimensions [mm]

IO-Link Memory Plug 2 4.8; 38.4; 230 -25...80 IP 65 / IP 67 L:52 x W:25 x D:18

Further information at www.ifm.com/gb/io-link

13

For industrial applications

The bus at a glance: The fast connection from AS-i to Profinet.

Intuitive navigation.
The central element is a graphic colour display. Thanks to its unambiguous pictograms and a menu structure for practical use it allows quick and intuitive set-up, operation and diagnosis. Further to four navigation buttons there are two context-sensitive softkeys directly below the display. For each AS-i master the status of all 62 possible AS-i addresses can be seen at a glance. The user sees immediately where a peripheral fault (marked yellow) or a configuration error has occurred. For the latter a difference is made between status of all 62 possible AS-i addresses slave projected but not present (marked red) and slave present but not projected (red with grey border).

Profinet gateway

14

Operation can be done completely via the integrated web interface. The menu structure is the same as on the unit. The dynamic web pages are completely transmitted via the HTTP port 80 so that there are no problems with firewalls.

With the ifm Profinet gateway for AS-Interface.


Everything at a glance:
A graphic colour display ensures a clear overview and easy operation.

Innovative concept for the voltage supply.


The flexible voltage supply ensures low-cost integration into your application. The gateway can be operated via AS-i power supplies, DC power supplies, or a combination of both. What is new is the possibility to supply AS-i lines as well as the gateway from one power supply. For this, ifm electronic offers the optional data decoupling module which is simply connected to the right side of the gateway. It allows supply from an AS-i power supply as well as from a 24 V DC standard power supply. The latter enables cable lengths up to 50 m per AS-i line.

From safe to low-cost:


The flexible voltage supply concept offers versatile integration possibilities.

The display provides information about type and quality of the voltage supply. Further to the exact voltage value and a possible earth fault, it shows the symmetry of the potentialfree AS-i voltage.

Operation via the internet:


Whether parameter setting, diagnosis or firmware update: if required, the gateway can be operated completely via the internet.

Possibilities of voltage supply Option 1


Gateway AS-i line 1 AS-i line 2 Pwr. supp. (AUX)

Option 2

Option 3
Power supply (AUX or AS-i)

AS-i AS-i pwr. supp. 1 power supply 1 AS-i pwr. supp. 2 AS-i pwr. supp. 2 High operational reliability even in cases of short circuits on an AS-i line.

Fast transmission:
The powerful hardware guarantees transfer times of less than two milliseconds.

Advantages

Efficient method for the decentralised structure.

Low-cost supply for all AS-i components from only one (standard) power supply.

Certified technology:
The Profinet class B certification guarantees the user real-time capability of the gateway.

Double port:
The integrated 2-port Profinet switch enables a line topology for Profinet.

AS-i 1.1 AS-i 1.2

AS-i 2.1 AS-i 2.2

AS-i 3.1 AS-i 3.2

Communication interface Profinet

AS-i master

AS-i master profile

Configuration interface

AS-i Profinet gateway voltage supply via Combicon connector RT device class B RT device class B 1 2 M4 M4 TCP/IP TCP/IP

Further information at www.ifm.com/gb/gateway

15

For industrial applications

The electronic route card for conveying and production.

RFID system with evaluation unit, antennas and transponders


ifm electronic has developed a new RFID system in particular for production and conveying. The robust evaluation unit has a Profibus-DP interface. The integrated web server enables easy parameter setting via the web browser. The requirements of harsh industrial environments are met by a stable metal housing, a wide temperature range and the high protection rating IP 67. The new RFID evaluation unit DTE100 has four antenna connections which can alternatively be used as digital I/Os. The antennas are connected via standardised M12 connectors. The standard pin assignment of the I/O connections ensures that common sensors or actuators are directly connected and powered from the RFID evaluation unit. In addition to LF transponders with up to 2-Kbit memory, the product portfolio of ifm electronic also covers HF transponders with 16 Kbits as FRAM version which can be rewritten an unlimited number of times.

RFID system with Profibus DP interface

The LF or HF read/write antennas in an industrially compatible housing are simply connected to the evaluation unit via a standard M12 connector.

16

The new flexible RFID system with integrated Profibus DP interface.


Clear:
Status display via LED and integrated web server.

Solve application tasks precisely.


The RFID system platform is widely used in production for identifying tools or monitoring production steps. Data can be saved and read in the transponder as on an electronic route card. Further applications can be found in quality assurance, in the automotive industry as well as in automation and conveying. Easy use and flexible parameter setting allow the user to solve each identification task precisely and without any problems.

Flexible:
Connection of RFID antennas or digital inputs/outputs. Antenna and transponder combinations of some bits to several Kbytes.

Easy:
Connection of the antennas with unshielded standard cables of 0.3 m to 20 m.

All connections are for standard M12 connectors. Current is also directly supplied via an M12 connection. The wide range of accessories such as Profibus connection cables and terminating resistors facilitate the system set-up.

Integrable:
Function blocks enable easy integration into the higher level automation or process control.

Certified:
The Profibus DP certification guarantees interoperability in automation technology.
RFID evaluation unit

PLC

Robust:
The protection rating IP 67 meets all requirements for harsh industrial environments.

Convenient:
A vast selection of accessories facilitates the system set-up.
Evaluation Antenna/ frequency range Web browser Transponder/ memory size Range [mm] RFID system with Profibus DP interface RFID evaluation unit Profibus DP EU/ETSI, 4 switching inputs or outputs RFID antenna 125 KHz RFID antenna 13.56 MHz ID tag 256 bits ID tag 2048 bits ID tag 16 Kbits FRAM ID tag 896 bits 60, depending on the tag

Further information at www.ifm.com/gb/dte100

17

For industrial applications

Current is now orange. Power supplies made by ifm electronic.

Outstanding performance.
Premium quality made in Germany: The new switchedmode power supplies made by ifm. The types BasicLine in a compact plastic housing and ClassicLine in a robust metal housing are available. Both designs only require little space on the DIN rail, because of their slim housings. The applications however are versatile: The primary power supplies provide sensors, actuators, controllers but also complex loads such as motors or DC/DC converters with current. After power on, the power supplies start, even without minimum load, and are, of course, short-circuit proof and overload protected. They ensure a stable output voltage at different loads and fluctuating input voltages. This guarantees operational reliability and maximum plant uptime. Two LEDs and a DCok output indicate and signal the operating states. The units can be used worldwide due to their widerange input and cULus approval.

Switched-mode power supplies BasicLine and ClassicLine Intelligent power reserve.


ClassicLine BasicLine Low-cost power supplies generally provide the user with no additional power. This is a risk for the operational reliability in critical supply situations, e.g. upon start of the plant. To exclude this risk, the plant operator normally has to use a more powerful power supply. The new ifm power supplies are different. They provide an intelligent power reserve. At a 1.5-fold nominal load the power supplies can provide extra current for 5 s, and for a longer time in case of lower overload. This additional power allows difficult loads to start (motors, DC/DC converters).

ber die beiden frontseitigen Bohrungen lsst sich der Sensor auf ebene Flchen und Profile schrauben.

Despite the high performance, the slim switched-mode power supplies only require little space in the control cabinet. The control cabinet remains cool due to the low heat loss.

18

24 V DC switched-mode power supplies ClassicLine AS-i with an intelligent power reserve.


Extra power:
Intelligent power reserve of 50 % for at least 5 s without voltage dip.

Voltage supply for AS-Interface


ifm electronic offers its own switched-mode power supply versions for the ASinterface fieldbus system. Due to the integrated data decoupling both data and supply voltage for the AS-i slaves and the connected sensors can be transferred via one single twowire cable. Data decoupling ensures balancing of the AS-i voltage and thus an optimum noise immunity of the AS-i system. In addition to the standard shortcircuit protection, overload resistance and no-load protection, the AS-i power supplies have a constant current characteristic that allows the user to drive high capacitive loads upon start-up behaviour.

Universal:
Wide-range input, single phase 100...240 V AC

Well stowed:
Robust metal housing or compact plastic housing.

Otherwise, they have the same powerful characteristics as the new 24 V DC power supplies.

BasicLine AS-i

Cool:
High degree of efficiency of up to 90 %, therefore only minimum control cabinet heating.

Tolerant:
Mains buffering depending on the version up to 450 ms at nominal voltage.

Informative:
Operating status signalled by LEDs and DCok output.
Nominal voltage [V] Output [V / A] Housing

Bus-compatible:
Special versions for the AS-i bus system.

Switched-mode power supplies BasicLine single phase 100...240 AC single phase 100...240 AC 24 DC / 1.2 24 DC / 2.5 plastic plastic

Switched-mode power supplies ClassicLine single phase 100...240 AC single phase 100...240 AC 24 DC / 2.5 24 DC / 5.0 metal metal

Switched-mode power supplies BasicLine AS-i single phase AS-i single phase AS-i 24 DC / 1.0 24 DC / 1.9 plastic plastic

Switched-mode power supplies ClassicLine AS-i single phase AS-i single phase AS-i 24 DC / 2.8 24 DC / 4.0 metal metal

Further information at www.ifm.com/gb/power-supplies

19

For hygienic and wet areas

For industrial applications

For oils and coolants

Tight and sealed due to the unique profiled sealing ring and vibration protection.
T series, EVT

C series, EVC

M8 connectors for highest demands.


Industrial M8 round connectors are a standard in todays automation technology. Applications in wet areas however have been largely avoided so far due to the poor sealing. The reason is the use of O-rings. They are not suitable for these connectors, because they rarely achieve the required ingress resistance for reasons of design. A further problem with conventional M8 connectors: in applications with strong shocks and vibration the coupling nuts are insufficiently protected against unintended loosening. In contrast, the new ecolink M8 connectors are ingress resistant up to IP 67, IP 68 and IP 69K, furthermore they have a shock and vibration resistant fitting. The connectors are 100 % compatible and fit on all standardised M8 plugs. Installation is done manually. Manual tightening of the nut is sufficient to guarantee a high protection rating and a high shock and vibration resistance.

ecolink M8 connectors, T series


Incomparable. Radially and axially ingress resistant.
The unique profiled sealing ring lies against the inside of the connector. Like a fillet, the diameter increases and ends in a plane support surface. The profiled seal is firmly kept in its position by the metal ring and is therefore captive. The result: protection rating IP 67, IP 68 and IP 69K. 1 ecolink Profiled sealing ring The innovative profiled sealing ring seals radially and axially. The seal always lies ideally against both sealing areas. 2 Conventional seal When tightening, the O-ring seal is often excessively pressed and forced apart. The connector is not tight. 1

Standard solution for industrial applications: the C series with PUR cable is also resistant against oils and coolants. The T series for hygienic and wet areas, however, has a PVC cable and housing as well as a coupling nut made of stainless steel.

20

M8 ecolink connectors now also for hygienic and wet areas.


Application:
Unique in the market the T series for hygienic and wet areas and the C series for oils and coolants as well as standard applications.
Ingress-resistant. The new ecolink M8 connectors have a unique profiled sealing ring which exactly fits against the inner surface and front of the device plug, providing an even contact pressure. So, the IP67 / IP 68 / IP 69K ratings are for the first time permanently achieved with M8 connectors. T series, scale 4:1 Socket Cable Connector

Ingress-protected:
The innovative profiled sealing ring dimensionally stable and captive provides the high protection ratings IP 67, IP 68 and IP 69K.

Fixed. A metal ring with saw tooth contour protects the nut against unintended loosening in case of shock and vibration.

Secure:
The saw-tooth type vibration protection ensures that the nut does not become loose unintentionally in case of shock and vibration. This is proven in tests with 750 g and 1 million cycles.

3-pole

4-pole

Manual mounting:
Manual tightening of the nut guarantees the high protection rating as well as a high shock and vibration resistance.
EVT, EVC* connector 3-pole EVT: 2, 5, 10, 25 m EVC: 2, 5, 10 m EVT: 2, 5, 10, 25 m EVC: 2, 5, 10 m EVT with LED: 2, 5, 10, 25 m EVC with LED: 2, 5, 10 m EVT, EVC* connector 4-pole EVT: 2, 5, 10, 25 m EVC: 2, 5, 10 m EVT: 2, 5, 10, 25 m EVC: 2, 5, 10 m EVT: 0.3, 0.6, 1, 2, 5, 10 m EVC: 0.3, 0.6, 1, 2, 5 m EVT: 0.3, 0.6, 1, 2, 5, 10 m EVC: 0.3, 0.6, 1, 2, 5 m EVT: 0.3, 0.6, 1, 2, 5, 10 m EVC: 0.3, 0.6, 1, 2, 5 m EVT: 0.3, 0.6, 1, 2, 5, 10 m EVC: 0.3, 0.6, 1, 2, 5 m EVT: 0.3, 0.6, 1, 2, 5, 10 m EVC: 0.3, 0.6, 1, 2, 5 m EVT: 0.3, 0.6, 1, 2, 5, 10 m EVC: 0.3, 0.6, 1, 2, 5 m EVT with LED: 0.3, 0.6, 1, 2, 5, 10 m EVC with LED: 0.3, 0.6, 1, 2, 5 m EVT: 0.3, 0.6, 1, 2, 5, 10 m EVC: 0.3, 0.6, 1, 2, 5 m EVT: 0.3, 0.6, 1, 2, 5, 10 m EVC: 0.3, 0.6, 1, 2, 5 m

Visible:
Transparent black housing for an optimum visibility of the LED even in bright lighting conditions.

Standardised:
The connection technology conforms to the M8 standard EN 61076 and is therefore compatible with all common M8 connectors.

Further information at www.ifm.com/gb/ecolink-M8

*in the pictures you see the T series EVT

21

A passion for

Quality

visit our website: www.ifm.com

Overview ifm product range: Position sensors and object recognition Inductive sensors Capacitive sensors Magnetic sensors, cylinder sensors Safety technology Valve sensors Photoelectric sensors Object recognition Encoders Evaluation systems, power supplies Connection technology Fluid sensors and diagnostic systems Level sensors Flow sensors Pressure sensors Temperature sensors Diagnostic systems Evaluation systems, power supplies Connection technology Bus systems Bus system AS-Interface Power supplies Connection technology Identification systems Multicode reading systems RF-identification systems Power supplies Connection technology Control systems Control systems for mobile vehicles Connection technology

Over 70 locations worldwide at a glance at www.ifm.com


ifm electronic gmbh Friedrichstrae 1 45128 Essen Tel. +49 / 201 / 24 22-0 Fax +49 / 201 / 24 22-1200 E-Mail: info@ifm.com

ifm article no. 7511466 We reserve the right to make technical alterations without prior notice. Printed in Germany on non-chlorine bleached paper. 10/11

Вам также может понравиться