Академический Документы
Профессиональный Документы
Культура Документы
Most comprehensive product line Torque range from 80 to 12,000 foot pounds Conventional and digital solutions Ideal for new installations or upgrades Complementary valve automation offering
instrumentation
understanding measurement analysis control integration optimization
Diagnostic functions can be configured to activate an alarm output or to provide self-diagnostic messages, which minimizes downtime. Damper drive commissioning is virtually worry-free. Contrac Electric Modulating Actuators promote quick, convenient setting of the zero and span in seconds, by using either the self-calibrating mode or by using local up/down buttons. No mechanical stops are required, and adjustment of the output torque can be electronically adjusted. LP and UP Linear and Rotary Electropneumatic Actuators are readily calibrated and set up in a matter of minutes using the AUTOSTROKE function of the TZID-C.
Communication
Digital bidirectional communication enables remote monitoring and control either on an individual unit basis or as part of an existing DCS. Communication is achieved through direct RS-232 or fieldbus connection via HART, FOUNDATION Fieldbus or PROFIBUS protocols.
Features and
Benefits
Digital control through phase inverter Allows for single-phase 115 or 230 vac power supply
Configurable operating characteristics Easy set-up and commissioning Configurable adjustment to controlling force and torque Accurate control without risk to final control element Configurable motion characteristics at end positions Shut-off with rated torque Shut-off with increased torque Break-away with increased torque
Expansive diagnostics and self-monitoring capabilities Load monitoring by event counting, maximum values and frequency of rated and break-away torques, dynamic overloads, motor reversals, gearbox and electronic temperatures Test functions for torque, gear backlash and motor brake Life expectancy and operating counter Easy trouble-shooting and preventive maintenance
Actuators
PME120 RHD250 RHD500/800 RHD1250/2500/4000 RHD8000/12000
Rated Torque (ft. lb.) Starting Torque (ft. lb.) Stroke Speed (sec/90) (adjustable)
80 160 20 45
Mechanical Design
Features and
Benefits
Stall proof actuator motors No need for position dependent or torque dependent switch-off
Wide range of output torque: 80 to 12,000 foot pounds Sizes to meet all requirements from windbox to FD and ID applications
Starting torque is twice rated torque Reduces size of actuator needed for normal operation Faster stroke speeds Tighter control for critical applications Full 360 range of operation with easy set-up for zero and span points Allows for mounting of actuator in any position Provides ability to increase rated torque by 30% using 120 rotation and lever arm geometry Continuous motor control Smoother, almost wear-free operation eliminates incremental increased starting current
High torque outputs with lower motor Long life with minimum maintenance
Ten year maintenance cycle
Electropneumatic Damper
The American Workhorse for 60 years - now with
Introducing the Digital Generation
ABB electropneumatic damper drives are the culmination of heritage products long recognized as the industry standard now marketed under the ABB name and designed with ABBs leading-edge digital technology.
Drives
Digital Intelligence
Digital UP with TZID-C
Microprocessor-based Highest operating accuracy
Features and
Benefits
Integrated position feedback Analog and/or digital feedback without additional external devices to calibrate and maintain
Local keypad, two line LCD and position indicator Easy local configuration and operation Digital communication via HART, FOUNDATION Fieldbus, and Profibus Remote configuration and monitoring Configurable operating parameters Easy set-up of direct/reverse action, limit stops, etc.
UP Basic Specifications
Model Rated Supply Pressure Conventional UP1 UP2 UP3 UP4 UP5 UP6 100 PSI 100 PSI 100 PSI 100 PSI 100 PSI 100 PSI Digital 90 PSI 90 PSI 90 PSI 90 PSI 90 PSI 90 PSI Rated Output Torque (foot pounds) 90 450 800 1450 2800 4600
Conventional UP with AV
Wide range of output torque: 90 to 4,600 foot pounds Sizes to meet all requirements
Features and
Benefits
Complete metal enclosures Superior strength and high immunity to aggressive environments
Easy and flexible installation Mounting in convenient locations with standard linkages Suitable for high temperature environments Applications up to 185F dependent on controlling unit
Simple auto/manual changeover Quick and smooth transfer from automatic to manual modes Wide range of options Added features such as NEMA 4X, air failure lock-up, heated enclosures, etc. Mechanical UP with AV
ABB Automation Inc. Instrumentation Division 125 East County Line Road Warminster, PA 18974 USA Tel.: +1 215-674-6000 Toll-Free: 1-800-829-6001 Fax: +1 215-674-7183 e-mail: instrumentation@us.abb.com
ABB Automation Products GmbH Schillerstrasse 72 D 32425 Minden Germany Tel.: +49 (0) 571 830 0 Fax: + 49 (0) 571 830 1470
ABB Automation Ltd. Howard Road, St. Neots Cambs, PE19 8EU UK Tel.: +44 1480 475 321 Fax: +44 1480 217 948
ABB Inc. 4410 Paletta Court Burlington, Ontario Canada L7L 5R2 Tel.: 905-681-0565 Toll Free: 800-461-9080 Fax: 905-681-2810
3BUS095005R0001 7/01 20K Printed in U.S.A. Copyright 2001 by ABB Automation Inc. All rights to trademarks reside with their respective owners. Specifications subject to change without notice. Pictures, schematics and other graphics contained herein are published for illustration purposes only and do not represent product configurations or functionality. User documentation accompanying the product is the exclusive source for functionality descriptions.