Вы находитесь на странице: 1из 16

FXL4 effect looper

user manual

Musikhaus Thomann e.K. Treppendorf 30 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 12.11.2012

Table of contents

Table of contents
1 2 3 4 5 6 7 General notes............................................................................................................................................... 4 Safety instructions..................................................................................................................................... 6 Instructions for use................................................................................................................................... 8 Components and functions................................................................................................................... 9 Programming............................................................................................................................................ 12 Technical specifications....................................................................................................................... 13 Protecting the environment.............................................................................................................. 14

FXL4
3

General notes

General notes
This user manual contains important information on safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device, include the manual for the next owner. Our products are subject to a process of continuous development. We therefore reserve the right to make changes without notice.

Symbols and signal words

This section provides an overview of the symbols and signal words used in this user manual.

effect looper
4

General notes

Signal word DANGER!

Meaning This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. This combination of symbol and signal word indicates a possible dangerous situation that can result in material and environmental damage if it is not avoided. Type of danger Warning danger zone.

NOTICE!

Warning signs

FXL4
5

Safety instructions

Safety instructions
This device is intended to be used to integrate multiple effects devices into the signal path between instrument and amplifier. Different configurations can be stored. Use the device only as described in this user manual. Any other use or use under other operating conditions is con sidered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use. This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.

Intended use

effect looper
6

Safety instructions

Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices.

NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations.

FXL4
7

Instructions for use

Instructions for use


Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the device against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. Handle the device with care. Do not try to disassemble or repair the device yourself in the unlikely event that it does not work. Do not use solvents such as alcohol to clean the device.

effect looper
8

Components and functions

Components and functions

FXL4
9

Components and functions

1 DC9V 300mA Connection for external power supply with DC 9 V. When connecting, you must respect the correct polarity. The negative pole is on the inside of the plug. 2 OUT Output jack. Connect here the input of your amplifier using a standard instrument cable. 3 RETURN / SEND Use these connectors to integrate up to four external effects devices. Connect each SEND socket with shielded 1/4" cables to the input of the external devices and their outputs to the associated RETURN jacks. 4 IN Input jack. Use a shielded 1/4" cable to connect your instrument here. 5 BANK + Footswitch to select the next higher memory bank. 6 BANK Footswitch to select the next lower memory bank.

effect looper
10

Components and functions

7, 8 A, B With the True bypass switches A and B, the selected effect groups are enabled or disabled. 9 BANK indicator Here, the device displays the number of the currently active memory bank. 10 EDIT Use this key to start the edit mode to programme the desired effects loop groups. 11 STORE Use this button to save the previously programmed effects constellation in the device. There are 2 8 memory banks available.

Establish all connections as long as the unit is switched off. Use the shortest possible highquality cables for all connections.

FXL4
11

Programming

Programming
To save desired effects combinations, proceed as follows: 1. 2. 3. First, choose a memory location that you want to edit. Then start the editing process by pressing the [Edit] button. Then activate the desired loop. The button [Bank+] activates loop 1. The button [Bank] activates loop 2. The button [B] activates loop 3. The button [A] activates loop 4. When all desired loops are enabled or disabled, press the [Store] button to finish the saving.

effect looper
12

Technical specifications

Technical specifications
DC 9 V 100 mA 283 mm 82 mm 55 mm 880 g (negative pole on the inside)

Operating voltage supply Current draw Dimensions (L W H) Weight

FXL4
13

Protecting the environment

Protecting the environment

Disposal of the packaging mate rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging. Disposal of your old device This device is subject to the European directive 2002/96/EC. Do not dispose of the device with your normal household waste. Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.

effect looper
14

Musikhaus Thomann e.K. Treppendorf 30 96138 Burgebrach Germany www.thomann.de

Вам также может понравиться