Вы находитесь на странице: 1из 2

Cola®Cor AER

CLEARNANCES: EINECS and TSCA

DESCRIPTION
Cola®Cor AER is a non-ionic blend of surfactants that has been specifically formulated
for aerosol applications including insecticides, cleaners, air fresheners and other water-
based emulsion products. It features corrosion inhibiting properties that are important in
aerosol formulation for can and valve protection. Cola®Cor AER has no components
that are on the California Prop 65 list and is suited for new formulations and updating
existing products.

• 0% VOC Content
• No CA Prop 65 Chemicals
• Inhibits corrosion of tin planted steel containers
• Compatible with all propellants, especially dimethyl ether
• Enhanced wetting for smaller droplet size
• Economical at suggested use rates
.
RECOMMENDED USE INSTRUCTIONS
AEROSOLS:
• Use Cola®Cor AER at 1% in the product formulation.
• Sodium benzoate or ammonium benzoate may be used for additional
protection. Suggested rates 0.25% to 0.5%.
• Ammonium hydroxide may be added for additional vapor phase protection.
Suggested rates 0.025% to 0.10%.
• The pH of the water emulsion should be 8.5 to 9.5 for best results.
LIQUIDS:
• Use Cola®Cor AER at 1.0% to 5.0% of the total formula.
• Adjust pH of water-based liquid to 8.5 to 10.0 with AMP-95, ethanolamine,
aqua ammonia, triethanolamine, etc.
• Sodium benzoate or sodium metasilicate may provide extra corrosion
inhibiting characteristics for residual liquid.
• May be used in solvent based cutting oils for lubrication, metalworking, and
corrosion inhibition.

TYPICAL PROPERTIES
Chemical Composition Blend
Appearance Clear Amber Liquid
pH (10% solution) >11.0
Alkali Number >50
Ionic Nature Nonionic
Specific Gravity 0.98 +/- 0.02

225 Colonial Drive South Pittsburg, TN 37380 Ph: 423-837-8800 Fax: 423-837-3888
SOLUBILITIES
Water (deionized) Dispersible
Ethanol Soluble
Aromatic Hydrocarbons Soluble
Mineral Spirits Soluble
Kerosene Soluble
White Mineral Oil Dispersible to Soluble
Natural Oils Dispersible to Soluble

TYPICAL FORMULATIONS
AIR FRESHENER AEROSOL LUBRICANT
Wt. % Wt. %
Fragrance 2.00 Cola®Cor AER 1.50
Cola®Cor AER 1.00 SAE 30 Oil 10.00
Sodium Benzoate 0.50 Norpar 13 80.00
DI Water 67.97 Triethanolamine 0.50
Aqua Ammonia 0.03 Glycol Ether DPnB 5.00
Dimethyl Ether 28.50 CO2 3.00
CA VOC Compliant

FLEA & TICK PREMISE SPRAY


Permethrin 100% 0.50
Cola®Cor AER 1.00
Sodium Benzoate 0.50
Aqua Ammonia 0.03
DI Water 74.97
Dimethyl Ether 23.00
Meets 1/1/98 CA VOC restrictions for
Flea and tick insecticides

LAST UPDATED 07/21/2006


WARRANTY
Colonial Chemical guarantees that its products meet published specifications. No other warranties or
guarantees are expressed or implied because the use of this material is beyond the control of Colonial
Chemical.
Colonial Chemical, Inc.
www.colonialchem.com
225 Colonial Drive Ph: 423-837-8800
South Pittsburg, TN 37380 Fax: 423-837-3888

225 Colonial Drive South Pittsburg, TN 37380 Ph: 423-837-8800 Fax: 423-837-3888

Вам также может понравиться